|
User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 30 matching ads. Now displaying the remaining 30 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 14947 | Combination (teach lathe) CNC / Manual |
| 2000 |
Bridgeport/Romi |
EZ Path |
Good |
sold |
Photo /
More Info. |
| 17" swing: Bridgeport EZ Pathe-CNC/Manual Lathe
17" swing over bed ways,
More info to come! |
|
| Ad # 14870 | Turning Center 4 - 10 in. chuck |
| 2014 |
haas |
ST30-SSY |
Excellent |
sold |
Photo /
More Info. |
| 10" chuck: 2014 Haas ST30-SSY for sale.
This is a 1 year old machine
. It still has 1 year left on a two year
warranty.
It has the following:
24 station turret
Automatic Tool Pre Setter
Hydraulic Programmable Tailstock
Intuitive Programming System
Belt Chip Conveyor
High Intensity Lighting
Servo Auto Door
Internal High Voltage Isolated Transformer
for 380-480V
Oper.
1 More Year of Extended Warranty
Standard Tool Holder Kit
Includes 16 Assorted Haas turret tool
holders for turning,
facing, boring
Included:
Benz Live Tooling
3 Axial Tools W/Solid Fix Quick Change
Spindles
3 Radial Tools W/Solid Fix Quick Change
Spindles
1 Parlec Radial Tool
1 Adjustable Angle Live Tool W/Solid Fix
Quick Change
Spindles +- 100 Degrees
Assorted Tool Holders For Turret Mounting.
6 Solid Fix Adapters ER-32
4 Solid Fix Adapters ER-16
Benz Tooling
B2-40 X1.00 Short Turning Holder
B6-40X1.00 Static Tool Holder
B300 -4-S4 Assembly Block Size S4
E4-40-32 Static Tool Holder VDI 40, ER-32
Collet Chuck
25 MM Wrench
B300 -4-S3 Assembly Block Size S3
Setting Tool For VDI Tool Alignment
Assorted Tools and Wrenches
Collet Chuck
22 Collets
Spindle Liner’s for collets and 3 jaw
chuck, Range, ½”-1 ¾”
Bar Puller P/N 43302
10” 3 Jaw Chuck
4 Sets Of Hard Jaws, (2 Brand New)
6 Sets of Soft Jaws (Steel)
8 Sets of Soft Jaws (Aluminum)
I Set of 4”High Aluminum Pie Jaws. (New)
This machine new last year was $122,000.00
It has an additional $30,000.00 in tooling
alone.
Cutting Time is Only 450 hrs.as of 11-2015
Machine has been recently had routine maint
performed,ready to go!
|
|
| Ad # 7965 | Combination (teach lathe) CNC / Manual |
| 2001 |
Milltronics |
ML20 E x 60 |
Very Good |
Sold |
Photo /
More Info. |
| 20" swing a 60" centers teach type lathe: Includes option Acc pkg # 2-color LCD monitor, coolant, High torque vector ... |
|
| Ad # 9567 | Vertical Turret Lathe (VTL) |
| 1981 rem |
Bullard |
56" high Column CNC |
Excellent |
sold |
Photo /
More Info. |
| 56” BULLARD Dyn-Au-Tape CNC High Column Vertical Turret Lathe : 56" BULLARD Dyn-Au-Tape CNC High Column Vertical Turret Lathe
Serial No. 33596. New 1981. remanufactured like new
Retrofit 2008 with Fanuc 21i CNC
Specifications:
Diameter of 4- Jaw Chuck 56”
Maximum Swing 68”
Maximum Height Under Rail 78”
Ram Stroke 71”
X-axis Type of Drive AC Digital Servo Motor
X-axis Motor 7.0 KW 9.3 HP
Z-axis Type of Drive AC Digital Servo Motor
Z-axis Motor 7.0 KW 9.3 HP
Spindle Drive Motor ( Duty Rated ) 55 KW AC 73.3 HP AC
( Continuous ) 45 KW AC 60 HP AC
Table Speeds 8.2 rpm – 300 rpm
Automatic Tool Changer 16 Tools
Machine Weight 76,450 Lbs
Splash Guard
Various Tool Holders
Manual
Price: F.O.B. NJ
Installation: not included
Trucking freight: not included
|
|
| Ad # 14703 | Combination (teach lathe) CNC / Manual |
| 2002 |
Fryer |
East Turn # ET18 |
Good |
sold |
Photo /
More Info. |
| 18" swing over bed x 40" centers : Fryer: Easy Turn #ET18 cnc/manual combination
lathe with 18"swing x 40"centers
Swing: 18" over bed ways,9.5" over cross
slide
Includes:10" 3 jaw chuck also 8" six jaw
chuck
2" spindle bore D1-6 camlock
2 speed auto shift feature
floppy drive & ethernet port
control: touch 2000 windows 95 conversational or G
Code programming Designed by toolmakers for toolmakers,
the
Fryer Easy Turn Series provides rugged construction and
high accuracy in a compact toolroom lathe
The Easy Turn is easier to use than a
conventional
lathe, yet offers the productivity of a CNC
Time consuming manual set-ups for threading,
tapers,chamfers, and contours are eliminated by the Easy
Turn's handle driven "Do One" cycles and electronic stops.
auto lube included
Spindle speeds:50 to 2500 rpm
rapid travers rates: (X,Z) 400IPM
manual tailstock 4MT
coolant system
includes: live center & drill chuck for
tailstock,
manuals |
|
| Ad # 14665 | Turning Center 11 in. & over chuck |
| 2012 |
Okuma |
Multus B200II |
Excellent |
sold |
Photo /
More Info. |
| max turning dia: 23.62": 2012 Okuma Multus B200II turning/milling center
chip auger
bar feed 6ft: lns move 52
high pressure coolant
tooling: capto-C6
control: osp-p3005-H
very low hrs...sold new for 850,000
std machine specs below-please verify:
MULTUS B200II
The MULTUS B200II is the ultimate fusion of
turn-
mill operations, with lathe, vertical or
horizontal machining center and material
handling
operations consolidated into one 6-8 inch chuck
class machine. This multi-tasking CNC machine
performs process-intensive machining for shorter deliveries, while making more effective use of floor space. With fewer setups, work in process is drastically reduced and machine utilization is greatly increased.
The MULTUS B200II has a 225° B-axis range with
12,000 rpm H1-milling spindle (opt. 20,000rpm)
with dual function (L/M). The H-1 dual function
spindle head utilizes CAPTO-C6 tooling and has a
16.2/10.8 hp PREX milling motor spindle. The
base
offering has 40-tool ATC, with a 60-tool ATC
available. The H1-turret has a 0.001 degree B-
axis
and compound motion Y-axis for machining
flexibility. The main spindle is equipped with a
full contouring C-axis.
Thermo-Friendly Construction assures high
accuracy, even in the most complex applications,
and the optional W version with sub-spindle
allows
a part to be handed from one spindle to the
other.
The MULTUS B200II is equipped with Okuma’s
THINC-
OSP P300S control that is designed with ease of
operation in mind. With single-mode operation
and
superior graphics, novice operators as well as
professional machinists will experience a
smoother, more effective way of producing parts.
max turning dia: 23.62"
speed range: 45-5000 rpm
hp:15/10
rapids: 1,575/1024ipm
|
|
| Ad # 12412 | CNC Lathe w/sub Spindle or Live Tooling |
| 1997 |
star |
SR-16 |
Excellent |
sold |
Photo /
More Info. |
| start swiss turn -16mm/5/8" bar cap: STAR SR-16 SWISS TYPE CNC LATHE,
1997 Model SR-16
Includes: Spego # 123-52 hyd. bar feed w/ 3/8", 5/8", 1/4" under tubes 3
16 ER collets-some included
4 live tools, 5 OD tools, 4 back working, 3 front working
7.5 deg index on c axis
no live tooling on sub spindle
RS 232 port
runtime: 14,650 Hrs total
Fanuc 16-TT control
some minor tooling included-1/2" Sq tooling , guide bushings, & collets 16ER
Std. catalog specs below -please verify.....
MACHINING CAPACITY:
Maximum Turning Diameter 16 mm (5/8")
Maximum Head Stock Stroke 205 mm (8")
Maximum Drilling Capacity Stationary Tool: 8 mm (5/16")
Maximum Drilling Capacity Power Driven Attachment: 5 mm (3/16")
Maximum Tapping Capacity Stationary Tool: M8 x Pl.25
Maximum Tapping Capacity Power Driven Attachment: M5 x PO.8
Maximum Milling Capacity 0 mm (3/8")
Maximum Die Cutting Capacity M8 x Pl.25
Maximum Slotting Capacity 1.5 mm Width x 4 mm Depth
CONTROL AXIS SPECIFICATIONS:
Rapid Feed Rate - X 12,000 mm/min.
Rapid Feed Rate - Y 16,000 mm/min.
Rapid Feed Rate - Z 18,000 mm/min.
Rapid Feed Rate - XB 18,000 mm/min.
Rapid Feed Rate - ZB 18,000 mm/min.
Maximum Turning Feed Rate - X 6,000 mm/min.
Maximum Turning Feed Rate - Y 6,000 mm/min.
Maximum Turning Feed Rate - Z 6,000 mm/min.
Maximum Turning Feed Rate - XB 6,000 mm/min.
Maximum Turning Feed Rate - ZB 6,000 mm/min.
Minimum Input Increment - X .001mm/.0001" (Diameter Value)
Minimum Input Increment - Y .001mm/.0001" (Diameter Value)
Minimum Input Increment - Z .001mm/.0001"
Minimum Input Increment - XB .001mm/.0001" (Diameter Value)
Minimum Input Increment - ZB .001mm/.0001"
Operation Mode Right Handed Machine
HEADSTOCK SPECIFICATIONS:
Spindle Speed 10,000 RPM
Speed Control S Code + Direct 5 Digit Command
Main Spindle Rotational Control Inverter Control
Main Spindle Minimum Indexing Angle 15 Degrees (24 Divisions)
Main Spindle Bore 20 mm (49/64")
SUB-SPINDLE SPECIFICATIONS:
Pick-Up Capacity
Maximum Chucking Diameter 16 mm (5/8")
Maximum Part Length for Front Ejection 80 mm (3-1/8")
Maximum Parts Projection Length 30 mm (1-5/32") Distance from Collet End
SPINDLE SPECIFICATIONS:
Spindle Speeds 400 - 6,000 RPM
Speed Control S Code + Direct 4 Digit Command
Rotational Control Inverter Control
Spindle Minimum Indexing Angle 15 Degrees (24 Divisions)
Sub Spindle Motor .75 KW / 1.2 KW (30 Min.)
Collet Type R16
TOOL POST SPECIFICATIONS:
Type: Gang Tool Post - 2 Axis Control
Number of Turning Tools 6
Number of Power Driven Tools 4
Tool Shank Size 12 x 95-120 / 12.7 x 95 - 120
POWER DRIVEN ATTACHMENT:
Spindle Speed 350 - 5,000 RPM
Speed Control S Code + Direct 4 Digit Command
Rotational Control Inverter Control
Motor .4 KW
Use Cross Drilling/Milling Spindle
COLLET CHUCK & GUIDE BUSHING:
Main Spindle Collet Chuck
Type R16 (Schaublin Type F20, Art No. 87)
Stationary Guide Bushing:
Standard Version: Type VNC20
(Star Standard Part Equivalent to C16)
Revolving Guide Busing:
Standard Version: Type R16
(Weukomm Type B Art No. 39.001)
C16 Version: Type VNC29
(Star Standard Part Equivalent to C16)
HYDRAULIC UNIT SPECIFICATIONS:
Installation Method Installed Separately Outside Machine
Hydraulic Tank Capacity 20 L (5.2 Gallons)
Normal Pressure 35 kg/cm²
Suitable Hydraulic Oil Viscosity Grade: ISO V632
Recommended Oil Shell Tellus Oil 32
Hydraulic Pump Motor .75 KW
COOLANT UNIT SPECIFICATIONS:
Installation Method Installed Separately Outside Machine
Coolant Tank Capacity 100 L (26.4 Gallons)
Safety Device Coolant Oil Level Detector
Cutting Oil Water Insoluble Cutting Oil
Coolant Motor .18 KW
LUBRICATING UNIT SPECIFICATIONS:
Lubrication Part Rectilinear Guide Bearing Portion
Oil Ejection Amount 2.5 cc/30 min.
Tank Capacity .8 L (.2 Gallons)
Safety Device Lubricating Oil Level Detector
Pump Motor 3 W
Suitable Lubricating Oil Viscosity Grade ISO VG68
Recommended Oil Mobil Vactra Oil No. 2SLC
3 SPINDLE END WORKING ATTACHMENT:
Number of Tools 3
Maximum Drilling Capacity 8 mm (5/16")
Maximum Tapping Capacity M8 x Pl.25
Maximum Chucking Diameter ER16 10 mm (.39")
Maximum Die Cutting Capacity M8 x Pl.25
Maximum Die Diameter 2.5 mm (.98")
4 SPINDLE UNIT FOR BACK WORKING:
Number of Tools 4
Maximum Drilling Capacity 7 mm (1/4")
Maximum Chucking Diameter 10 mm (.39")
Maximum Tapping Capacity M6 x Pl.0
Maximum Chucking Diameter ER11 7 mm
EQUIPPED WITH:
Fanuc 16TT Control
Sub-Spindle 15 ?? Degree Indexing Unit with Synchronous Phase Control of
Main Spindle and Sub-Spindle
|
|
| Ad # 4989 | Turning Center 4 - 10 in. chuck |
| 70's? |
Hardinge |
AHC |
Very Good |
sold |
Photo /
More Info. |
| Hardinge AHC-Automatic Chucker Lathe: 1-1/16" bar capacity
13" swing over ways, 6" over cross slide
12' bar feed
6 position turret
new top shield added
cut-off/ threading attachment option
much tooling included,collets, holders,
coolant
roll-around console control
needs brake adjusted-minor work |
|
| Ad # 9475 | CNC Lathe w/sub Spindle or Live Tooling |
| 1997 |
Mazak |
Super Quick Turn 18S Mark 2 |
Very Good |
Sold |
Photo /
More Info. |
| Mazak CNC Lathe W/ sub Spindle-10" chuck: Main Spindle-10" 3 jaw chuck
Sub Spindle- 6.5" 3 jaw chuck
chip conveyor
tool eye setter
parts catcher
12 station turret
Control: Mazatrol T Plus
Control T-Plus
Maximum Swing 20.9"
Spindle Bore / Bar Capacity 2.99" / 2.5"
Between Spindles 22"
Spindle Speed 4000 RPM
Main Motor 25 HP
Number of Tools 12 Position Turret
5HP / 3000 RPM Live Tooling-verify ????
10HP / 4000 RPM Sub-Spindle
10" & 6" Hydraulic Chucks
Chip Conveyor
Parts Catcher
|
|
| Ad # 15254 | Combination (teach lathe) CNC / Manual |
| 1996 |
Romi |
EZ Path |
Good |
sold |
Photo /
More Info. |
| 16" swing x 40" centers: Bridgeport/Romi EZ path Lathe
manual or cnc control-conversational control
16" swing over bed
center dist:40"
3 jaw chuck
toolpost
auto lube
chip tray
they were both working when taken out from power!
movable safety shield
std: mfg specs below-please verify actual machines
wing Over Bed: 16.5"
Swing Over Cross Slide: 8"
Distance Between Centers: 40"
Height Of Centers: 8"
Hole Thru Spindle: 2"
Spindle Speeds (24): 37.5 - 3,000 RPM
Spindle Nose: A2 - 5
Bed Width: 12"
Bed Height: 13-5/32"
Rapid Traverse Rate X/Z Axis: 250"/Min.
Spindle Taper: 1°26'
Quill Bore Taper MT#: MT#4
Quill Diameter mm(in.): 2"
Quill Travel mm(in.): 6.3"
Horsepower: 8 H.P.
Voltage: 480V ~ 3 Phase
Dimensions (L x W x H): 90" x 56" x 87"
Weight: 4,000 Lbs.
2 available |
|
| Ad # 15230 | Turning Center 11 in. & over chuck |
| 2005 |
Sunfirm-SFM |
CST4280-14A |
Good |
sold |
Photo /
More Info. |
| 36" swing x 12ft bed: 2005 SFM-Sunfirm #CST428014A
14" spindle bore:A2-11
8 tool turret
rpm:1-3500
boring bar dia:2"
quill dia 6"
tailstock:6MT
voltage 220/3
swing: 42" over bed ways,27"over crosslide,55" over gap
30 HP
dist.between centers: 12ft
4 jaw chuck:26" dia
control: Fanuc OITC
chip conveyor
|
|
| Ad # 11318 | Turning Center 4 - 10 in. chuck |
| 1986 |
Mazak |
Quick Turn 10N Universal |
Good |
sold |
Photo /
More Info. |
| 8" chuck : 1986 Mazak Quick Turn 10N Universal CNC Lathe
includes: Parts catcher-removed temp-can easily be attached-was in the way
touch probe-tool offsets
chip conveyor
8" hyd chuck-3 jaw-has some soft jaws
bar puller included in hilder slot
12 station turret
Programmable tailstock & (Quill programmable feature) but needs board repaired for programmable quill to function correctly-$500.00
3600 RPM max
Control: Mazatrol T-2 conversational or G code
Std Specs Below-please verify--
RS32 Port
Description Spec Values
Capacity: Swing / Swing Over Cross Slide 17.6" / 9.1"
Maximum Turning Diameter / Maximum Turning Length 6.29" / 17.75"
Distance Between Centers 20"
Spindle: Spindle Speeds 60 - 3,600 RPM
Spindle Bore / Bar Capacity / Nose 2.2" / 1.55" / A2-5
Main Motor 20 HP
Turret: Number of Positions 12 Stations
X-Axis Travel 6.5"
Z-Axis Travel 21.4"
Tailstock: Stroke of Body / Quill 15.8" / 3.1"
Quill Diameter / Taper 2.17" / MT #4
Rapids: Rapid Traverse (X / Z ) 787 / 479 IPM
Dimensions: Floor Space (L x W x H) 108" x 65" x 75"
Equipped With :
Programmable Hydraulic Tailstock and Quill
Manuals
Chip conveyor
Interfaced for Bar Feeder
Parts Catcher
Some Tooling included
machine runs good and holds good tolerances |
|
| Ad # 11316 | Combination (teach lathe) CNC / Manual |
| 1999/046 |
Milltronics |
ML17 |
Good |
sold |
Photo /
More Info. |
| 17 x 40: 1999 Milltronics ML17
control: centurior 6
17" swing over ways , 10" over cross slide
40" centers
10HP
3 jaw chuck
floppy drive & RS 232
Dorian Quadra toolpost post w/ 6 holders
spindle bore-2-1/4"
3 speed gear box
machine runs good used in small job shop daily
optional collet closer wheel system available add $1300.00
rigger required to load -approx: 1000.00 |
|
| Ad # 16021 | Combination (teach lathe) CNC / Manual |
| 2002 |
Fryer |
Easy Turn # ET18 |
Good |
sold |
Photo /
More Info. |
| 18" swing over bed x 40" centers : Fryer: Easy Turn #ET18 cnc/manual combination
lathe with 18"swing x 40"centers
Swing: 18" over bed ways,9.5" over cross
slide
Includes:10"-3 jaw chuck only
2" spindle bore D1-6 camlock
2 speed auto shift feature
floppy drive & ethernet port
control: touch 2000 windows 95 conversational or G
Code programming Designed by toolmakers for toolmakers,
the
Fryer Easy Turn Series provides rugged construction and
high accuracy in a compact toolroom lathe
The Easy Turn is easier to use than a
conventional
lathe, yet offers the productivity of a CNC
Time consuming manual set-ups for threading,
tapers,chamfers, and contours are eliminated by the Easy
Turn's handle driven "Do One" cycles and electronic stops.
auto lube included
Spindle speeds:50 to 2500 rpm
rapid travers rates: (X,Z) 400IPM
manual tailstock 4MT
coolant system
includes: tailstock, manuals,no toolpost,3 jaw chuck only |
|
| Ad # 14015 | Combination (teach lathe) CNC / Manual |
| — |
Chevalier |
18" x 40" |
Good |
Sold |
Photo /
More Info. |
| 18" x 40": Chevalier cnc/manual teach lathe
18" swing over bed, 14" over cross slide
8" 3 jaw chuck
control: Anilam 1200TC vers: 6.08A software
RPM: 10-2300
Spindle bore: 2-1/2"
QC toolpost
machine on time hrs:5490
note: have tailstock & steady rest not shown |
|
| Ad # 12188 | CNC Lathe w/sub Spindle or Live Tooling |
| 2007 |
Gildemeister |
CTX 410 |
Excellent |
Sold |
Photo /
More Info. |
| live tooling lathe: 8" chuck: Gildemeister CTX 410 CNC turning center w/ live tooling
control: Fanuc 32I
live tooling but no y axis
8"-3 jaw hyd chuck
12 station turret-live tooling
tool presetter
tailstock
all manuals included
chip conveyor
set up to run with bar feed but non included
machine hrs: 2,301 total
machine cut time hrs: 1526
includes some tooling approx 15 pc with 2 live holders
VDI tooling
working area: 19.88 swing
max clamp dia-7.87"
traverse stroke: 6.69"
longitudinal stroke: 24.99"
c axis-1 deg
coolant/filter sys
A6 spindle w/3.42" spindle bore
main spindle HP -28hp |
|
| Ad # 13961 | Combination (teach lathe) CNC / Manual |
| 2002 |
Fryer |
Easy turn # ET18 |
Good |
sold |
Photo /
More Info. |
| 18" swing over bed x 40" centers: Fryer: Easy Turn #ET18 cnc/manual combination lathe with 18 swing x 40"cent... |
|
| Ad # 15185 | CNC Lathe w/sub Spindle or Live Tooling |
| 1988 |
Mazak |
QT-10ATC-U/MC |
Good |
sold |
Photo /
More Info. |
| 8" hyd chuck-live tooling: MAZAK QUICK TURN 10N ATC M/C CNC TURNING CENTER with live tools
Year: 1988
control:Mazatrol T-3 conversational
*MACHINE LOOKS & RUNS VERY NICE, WELL KEPT AND
MAINTAINED! TOOL Changer and live tooling,chip conveyor,parts catcher features recently overhauled.
SPECIFICATIONS:
Chuck Size:......................8.0 in
Bar Capacity:..................1.86 in
# Axis:.............................3
Power:...........................15.0 hp
RPM:............................3600 rpm
Turning Dia:...................10.0 in
Swing:..........................17.3 in
Centers:.......................19.6 in
Tailstock (Yes/No):................YES
EQUIPPED WITH:
LIVE TOOLING, 3 OFFSET LIVE TOOLS(recently
overhauled), ASSORTED DRILLING/BORING TOOL
HOLDERS.
IN EXCELLENT CONDITION, UNDER POWER MAKING
PARTS IN NC PLANT!
Note: does not include collet chuck only 8" 3-jaw hyd Kitagawa chuck
Does include: chip conveyr,tool holder set
parts catcher,tool eye,no tooling,complete set of books rigging/loading fee approx: 1200.00
|
|
| Ad # 10249 | Turning Center 11 in. & over chuck |
| 1996 |
Mazak |
Slant Turn 50N-2000U |
Very Good |
Sold |
Photo /
More Info. |
| 16" chuck : 16" 3 jaw chuck
chip conveyor
25 tool turret-inner & outer dia
control: mazatrol T-plus
steady rest support
tailstock
Std specs below please verify
MAZAK ST 50N Basic Spec Machine Type :horizontalControl :MazatrolNumber of Axes :2Cutting Diameter :356 to 660 mmCutting Length :1524 to 2032 mmBar / Bore :89 to 165 mmTool Stations :15Spindles :1Motor Power :37.29 kwSpindle Speed :0 to 1600 rpm
Specification Description
SPECIFICATIONS
Max. Swing 31.7"
Swing Over Carriage 22"
Max. Cutting Diameter 26"
Distance Between Centers 80"
X Axis Travel 22.64"
Z Axis Travel 82"
Spindle Speed Ranges 4 - 1600 RPM
Spindle Nose A1-11
Spindle Bore 4"
Type Of Turret Decagonal Drum
Number of Turret Positions 15
Rapid Traverse Rate X Axis 475 IPM
Rapid Traverse Rate Z Axis 640 IPM
Tailstock Body Travel 74"
Tailstock Quill Diameter 5.9"
Tailstock Center MT#5
Tailstock Quill Travel 5.12"
Main Motor (30 Min) AC 50 HP
|
|
| Ad # 14591 | Combination (teach lathe) CNC / Manual |
| 200? |
Chevalier |
FCL-1840A |
Good |
sold |
Photo /
More Info. |
| teach lathe _ 10" chuck: Chevalier FCL-1840A smart lathe plus
Chevalier cnc lathe
18" swing x 40" centers
Anilam 4200 T cnc control
Quick change tool holder
10" 3 jaw chuck
|
|
| Ad # 11147 | Combination (teach lathe) CNC / Manual |
| 1999 |
Ecoca |
PC-3807 |
Very Good |
Sold |
Photo /
More Info. |
| cnc/maual lathe combo: 1999 ECOCA PC-3807 CNC TOOL ROOM LATHE
Chuck Size 6"
Max Diameter Bar Capacity 1.75"
Max Swing Over Bed / Carriage 18.5" / 9.44"
Max Turning Diameter 9.44"
Distance Between Centers 29.5"
Bed Width 11.81"
Tools 4
Spindle Speed 20 - 4000 RPM
Spindle Bore 1.8"
Spindle Nose D1-5
Spindle Motor 10 HP
Rapid Traverse Rates (X & Z) 315 IPM
X-Axis Travel 9.4"
Z-Axis Travel 29.52"
Tailstock Taper MT#3
Machine Weight 2420 lbs.
FEATURES:
MITSUBISHI CNC CONTROL
CNC, Manual and Teach Modes
G-Code and Conversational Programming
Aloris Quick-Change Single Tool Post
6" Manual 3-Jaw Chuck
Tailstock
Electronic / Manual Handwheels
Full Enclosure
LOW HOURS, WELL MAINTAINED, FULLY OPERATIONAL |
|
| Ad # 14576 | Turning Center 4 - 10 in. chuck |
| 1998 |
Mori Seiki |
SL-250B/500 |
Good |
sold |
Photo /
More Info. |
| 10"- 3 jaw chuck w/ bar feeder: 10" 3 jaw chuck
10 station turret
hyd. programmable tailstock
parts catcher
bar feed system-LNS servo 52
control- MSC-500 Mori
Factory Specs-verify below..
MORI SEIKI SL-250 B 500
CNC LATHE
With FANUC MSC 500 CNC CONTROL
SPECIFICATION:
Swing Over Bed 26.77"
Swing over cross Slide 20.08"
Max Turn Diameter 15.31"
X Axis Travel 9.25"
Z Axis Travel 20.47"
Rapid Traverse Rate: 945 IPM
Spindle Nose: A2-8
Spindle Bore: 3.38"
Spindle Drive Motor: 20 HP / 15 HP
Spindle Speed -Main 5000 RPM
Turret Capacity: 12 Tool
Machine Weight: 10,000 Lbs.
Approximate Dimensions: 97" x 73" x 74.2"
Equipped With:
MSC 500 CNC Control
Turbo Side-Discharge Chip Conveyor
Coolant System
All Available Manuals
10" Chuck Main Spindle
Parts Catcher
Manual Tool Eye
|
|
| Ad # 16012 | Turning Center 4 - 10 in. chuck |
| 03-13 |
MAZAK |
QuickTurn 200-12D |
Excellent |
sold |
Photo /
More Info. |
| Mazak 13" x 20" CNC Lathe: Mazak Quick Turn Smart 200 Cnc Turning Center
New: 2013
Max Cutting Diameter 13.78″
Max Cutting Length 19.6″
Max Swing 25.98″
Swing Over Cross Slide 14″
Z-Axis Travel 22″
X-Axis Travel 7.75″
Spindle Speed 35 To 5,000 Rpm
Spindle Motor 20/15 Hp
Bar Capacity 2″
Spindle Nose A2-6
Rapid Traverse Z 1299 Ipm / X 1181 Ipm
Equipped With:
* Mazatrol Smart Conversational Cnc Control
* 8" 3-Jaw Chuck
* 12 Position Turret
* Manual Tool Eye
* Jorgensen Chip Conveyor
NOTE: Quantity of Tooling is also available but
is NOT included in machine price but can be
purchased separately either asa whole or per
piece. Please ask for details
|
|
| Ad # 14568 | Turning Center 11 in. & over chuck |
| 1982 |
Wasino |
L5-J2 |
Good |
sold |
Photo /
More Info. |
| 12" chuck: Wasino #XXL5-J2 turning center
12" 3 jaw chuck
control: Fanuc 6T
swing: 22.5" over ways
nominal work size: 10" x 24" max 31.5"centers
spindle bore: 3.5"
spindle nose: A2-8
speeds: 8-3000rpm
Z travel: 35"
X travel: 11"
turret-drum type 8 tools
rs232 port
chip conveyor
manuals
Note: nice running machine!
rigging/loading fee:$1600.00 |
|
| Ad # 14519 | CNC Lathe Part & Accessories |
| 200? |
Edge Technologies |
Minuteman 320 SE |
Excellent |
sold |
Photo /
More Info. |
| 6ft length x ? dia: Minuteman 320 SE Edge Technologies bar feeder.
Was originally installed on a Star SR-20R-III.
6’ bar length capacity.
set up for ?? Dia--checking
|
|
| Ad # 13133 | Turning Center 4 - 10 in. chuck |
| 1995 |
Cincinnati |
Talon 210 |
Good |
sold |
Photo /
More Info. |
| 10" chuck: Cincinatti Talon 210 turning center
Control: Acromatic 850SX
collet system with spego bar feed included
also 10" chuck
EQUIPPED WITH: Acramatic 850SX CNC Control with 14" CRT (display out so mounted std monitor), RS-232 Port, 12 Position Turret, Programmable Tail stock, Chip Conveyor and Coolant System.
CATALOGUE SPECIFICATIONS:
Max Swing Over Bed............................. 20.86"
Max Swing Over Carriage....................... 11.80"
Max Tailstock Position............................ 21.60"
Max Machinable Center Distance............. 23.60"
Chuck Size.............................................. 10"
Cross Travel (X-Axis)................................... 6.8"
Longitudinal Travel (Z-Axis)...................... 23.6"
Feed Range (Infinitely Variable).............. .1-200 IPM
Rapid Traverse Rate (X & Y Axis).......... 600 IPM
Number of Turrets............................ 1
Tool Positions..................................... 12 Total
Spindle Bore............................................ 2.44"
Spindle Nose............................................ A2-6
Spindle Speed Range (1 RPM Increments).................. 45-4500 RPM
Spindle Horsepower................................ 20 HP
Approximate Machine Dimensions.......................... 127" x 86"
Approximate Machine Height....................... 73"
Approximate Machine Weight.................... 10,600
it runs under power !!!!!!!
|
|
| Ad # 14995 | Combination (teach lathe) CNC / Manual |
| 2000 |
Romi/Bridgeport |
EZ Path SD |
Good |
sold |
Photo /
More Info. |
| 16" x 40": 2000 Bridgeport/Romi#EZ-Path#SD Lathe-16x40"
cnc/manual operation
control: DX32R
17" swing over bed
chuck:8" 3 jaw
center distance: 40"
Swing Over Bed: 16''
distancee Between Centers:40''
RPM: 4 - 4000
HP:10
Hole Thru Spindle: 2"
SPECIFICATIONS:std mfg specs below
SWING OVER BED.................. 16.96"
DISTANCE BETWEEN CENTERS......... 40"
SWING OVER CROSS SLIDE............ 8"
CROSS SLIDE TRAVEL ............... 8.6"
SPINDLE NOSE........... ASA A2-5"
SPINDLE BORE......... 2.08"
BED WIDTH ............................. 12"
SPINDLE SPEEDS VARIABLE .. 25 TO 4,000 RPM
TAILSTOCK QUILL TRAVEL....... 4.7"
TAILSTOCK QUILL DIAMETER....... 2.36"
TAILSTOCK TAPER.............. #4MT
FLOOR SPACE REQUIRED..... 68" X 110"
APPROXIMATE WEIGHT....... 4,000 LBS.
EQUIPPED WITH:
-BRIDGEPORT EZ PATH CNC CONTROL DX32R, 32 BIT PROCESSOR WITH
- TURN PARTS MANUALLY OR AUTOMATICALLY
- "TEACH" 1ST PART, RUN REMAINING PARTS AUTOMATICALLY
- 24 OFFSETS, GRAPHIC TOOL LIBRARY, TOOL PATH VIEWED ON-SCREEN
- SPINDLE& AXES DRIVES
- THREADING, TURNING, DRILLING, GROOVING, FACING CYCLES & MORE
- DUAL ELECTRONIC HANDWHEELS
- 3.5" FLOPPY DISK DRIVE RS 232 PORT
- SPLASH GUARDING SINGLE SLIDING DOOR
- 3-JAW CHUCK
- TOOLPOST
- COOLANT SYSTEM WITH REMOVEABLE CHIP PAN
- 10.0 HORSE POWER SPINDLE MOTOR
- MANUALS
- Basic tooling package
note: includes loading onto flat bed truck
|
|
| Ad # 14982 | Combination (teach lathe) CNC / Manual |
| 1999/97 |
chevalier |
FCL1840D |
Good |
sold |
Photo /
More Info. |
| 18" x 40": 1997 & 1999 Chevalier FCL 1840D combination
teach lathes for sale cnc/manual operation
dynopath/autocon controls
10" chuck 3 jaw
2.125 spindle bore
all books included
coolant
steady rest 8"
12" 4 jaw chuck
floppy & rs232 ports |
|
| Ad # 14979 | Turning Center 4 - 10 in. chuck |
| 2001 |
Daewoo |
Lynx 200LC |
Good |
sold |
Photo /
More Info. |
| 8" chuck:
chuck: 8" -3 jaw & collet chuck
spindle bore: 2.5"
chip conveyor
parts catcher
tool setter eye
no tooling included
control:21I-T
Std Mfg specs below
Swing Over Bed 20.1"
Maximum Turning Diameter 11"
Maximum Turning Length 20"
X-Axis Travel 6.3"
Z-Axis Travel 20.9"
Rapid Traverse Rate X/Z-Axes 790/945IPM
Spindle Speed Range 40 - 4000 RPM
Spindle Motor 15 HP
Bar Capacity 2.625"
Spindle Nose A2-6
Number of Turret Tool Stations 12
Approximate Floor Space:101"LR x 63"FB x 65"H
Approximate Machine Weight 7700 LBS
notes:will hold +/-.0005 no problem
Loading/rigging fee add $1000.00
|
|
| Ad # 14977 | Turning Center 4 - 10 in. chuck |
| 1991 |
Okuma |
LB15C big bore |
Good |
sold |
Photo /
More Info. |
| 10" hyd.chuck: Okuma LB15C Lathe Big Bore-2 axis cnc lathe
Spindle bore:3.15"
Max turning length: 19.7"
Spindle nose:ASA: A2-8
spindle speeds: variable up to 55-3000rpm max
cross slide travel:6.89"
longitudinal Z axis travel: 20.47"
Quill taper: 5MT Quill stroke: 4.72"
Main spindle Motor:10/15HP
chuck:10" 3 jaw hydraulic
control: OSP 5020Lwith IGF conversational programming
12 station turret
includes: 2 collet chucks:5C & 3J
no chip conveyor
low hrs. |
|
We found 34 matching ads. Now displaying the remaining 34 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 9863 | Hollow Spindle/Big Bore Engine Lathes |
| 1993 |
Hermes |
34-200 |
Very Good |
sold |
Photo /
More Info. |
| 34" x 200 inch: HERMES GAP BED ENGINE LATHE
Specifications:
Year of manufacture 12/01/1993
Serial number sn: 202960103
Swing over bed 34"
Swing in gap 42"
Length of gap 12"
Swing over cross slide 20"
Center distance 200"
Spindle speeds 5-670 rpm, 18 steps
Spindle bore 6 1/8"
Threading Yes, inch and metric
Chuck diameter 36" 4-jaw chuck
Chuck bore 6 1/8"
Taper attachment Yes
Steady rest 12" roller type steady rest
Comments: Mehanite casting, hard ways.
|
|
| Ad # 6967 | General Purpose Lathe 15in. to 23in. swing |
| 80's |
clausing |
Colechester 17" |
Good |
sold |
Photo /
More Info. |
| 17" swing x 100" centers W/ 3" spindle bore: 17" swing over ways, 10" over crossilde
100" cener distance
3" spindle bore
12" 3 jaw chuck
no tool post
10 HP
20-1600 RPM
|
|
| Ad # 7966 | Heavy Duty Large Lathe 24in. & over swing |
| 1965 |
Morando /Torino |
TUF-1 |
Very Good |
Sold |
Photo /
More Info. |
| Large 98" swing x 240 "(20ft) centers Lathe: Swing over bed max -98"
max swing 66" over crosslide
center dist. 240" centers, 20ft
bed width-37-1/2"
speeds-2-120 RPM
soft start 50 HP motor-upgraded feature
3.5" spindle bore
rapid traverse on bed
4 jaw -55" dia.chuck
steady rest 30" cap
square ways
this is a raised bed machine
motorized tailstock
Metric threading w/ many inch change gears included: capable of 0.5, .75, 1 up to 12, 14, 16, 18, 20, 24 threads per inch & metric: 0.5, 0.75,1, 1.25, 1.5, 1.75, 2, 2.25, 2.5, 3.5, 4, 4.5, 5, 6, 7, 8, 9, 10, 20, 34, 40-100, 120, 140, 160, 180, 200 mm/m-metric
complete manuals with prints
|
|
| Ad # 11653 | Miscellaneous / Special Lathes |
| — |
Weiler |
10" |
Very Good |
sold |
Photo /
More Info. |
| speed lathe: Weiler
speed lathe
10" swing
8" 3 jaw chuck
chuck guard
2-1/4" spindle bore
speeds -step pulley belt changeable: 125,185, 250,510,710,1000,355,500,710,1400,2000,2800 RPM |
|
| Ad # 11652 | General Purpose Lathe 15in. to 23in. swing |
| — |
Enco |
111-3940 |
Good |
sold |
Photo /
More Info. |
| 20 swing x 80"centers-3-1/8" S.bore: Enco # 111-3940 manual lathe
20" swing over bed, 13" swing over cross slide
3-1/8" Spindle bore
80" bed
gap bed
QC toolpost w/ 3 holders
12" 3 jaw chuck
5" max dia steady rest
coolant
24-1600rpm
inch/metric threads
inch and metric dual dials
machine needs to be moved and replaced before
sold |
|
| Ad # 11651 | Manual Lathe Parts & Accessories |
| — |
Illinois |
— |
Very Good |
sold |
Photo /
More Info. |
| bench centering -balance fixture: balancing/bench centering fixture
16" centers
8" swing
|
|
| Ad # 14826 | General Purpose Lathe 15in. to 23in. swing |
| 1991 |
Supermax |
LG1643H |
Good |
sold |
Photo /
More Info. |
| 16" x 48": Supermax manual lathe # LG1643H
swing over bed:16" over crosslide: 9"
center dist: 48"
gap bed
8" 3 jaw chuck
spindle rpm: 55-2000
2" spindle bore
QC tool post only-no holders
drill chuck shown |
|
| Ad # 11639 | Tool Room Lathe 8in. to 14in. swing |
| 75 ? |
Leblond |
regal |
Good |
sold |
Photo /
More Info. |
| 14" swing x 36 centers: Leblond Regal
14" swing over bed x 36" centers
10" swing over cross slide
36" between center
8" 3 jaw chuck
QC toolpost W/ 4 holders
inch threading
gear box little noisy in mid range
1.5" spindle bore |
|
| Ad # 2127 | General Purpose Lathe 15in. to 23in. swing |
| — |
Leblond/Regal |
21" x 10Ft. |
Good |
sold |
Photo /
More Info. |
| 21" swing x 10Ft. centers manual lathe: leblond
21" swing x 10Ft. centers manual lathe
Long 12ft bed overall
21" swing over ways, 12" swing over cross
slide
2" spindle bore
English threads
Steady & follower rests
12" -4 jaw chuck
10HP
25-1000RPM
|
|
| Ad # 10740 | Vertical Turret Lathe (VTL) |
| 40's ? |
Betts |
— |
Good |
Sold |
Photo /
More Info. |
| 78" dia chuck: 78" dia chuck
4 jaw chuck
20HP main motor
88" max swing between housings
60" side head travel
pit required
Buyer must pay rigging / loading |
|
| Ad # 10739 | Vertical Turret Lathe (VTL) |
| 40's ?? |
Betts |
— |
Good |
sold |
Photo /
More Info. |
| 9 ft chuck dia: 9 ft chuck Dia
14 ft max swing between housings
5ft max under rail
36" height under side head
hyd assist rail lift.
16 pc chuck jaws
60" arm travel -left to center, right to center
12" ram travel-up/down
ac vari speed drives
pit required
40 HP DC main motor
buyer must pay for rigging/loading..
electrical cabinet: 96" Wx 32" D x 64" H |
|
| Ad # 12728 | Heavy Duty Large Lathe 24in. & over swing |
| 1988 |
Nardini |
IN25200T |
Good |
sold |
Photo /
More Info. |
| 25" swing over ways x 200"centers: 1988 Nardini IN 25200T lathe
25" swing over bed, 20" over cross slide
center dist: 200" =16'6"
gap bed
18" 4 jaw chuck
Note: 18" 3 jaw chuck-not included
taper attach
5" follow rest x 2
8" steady rest
inch / metric threading
Newall 2 axis DRO
4 way std toolpost w/ no holders
4-3/4" spindle bore
16-1250 RPM
20 HP
rapid traverse
ways look very good
manuals
some spare parts
good machine runs well ...good tolerances |
|
| Ad # 10717 | Ram Type & Saddle Type Turret Lathes |
| — |
Hardinge |
DSM-59 |
Good |
sold |
Photo /
More Info. |
| —: collet closer
4.5" swing over slide
die head
parting tool
6 station turret
variable speed spindle-230-3500RPM
some tooling
1 hp |
|
| Ad # 10716 | Heavy Duty Large Lathe 24in. & over swing |
| — |
Putnam |
LH-3-8170 |
Good |
Sold |
Photo /
More Info. |
| 46" swing over bed,34" over cross slide x 6ft centers: 46" swing over bed ways, 34" over cross slide
spindle speeds: 3.84-192 RPM (18) speed
4 way std. toolpost
taper attachment
36" 4 jaw chuck
6 ft between centers
5MT tailstock
17" steady rest
2" spindle bore
25HP |
|
| Ad # 1255 | General Purpose Lathe 15in. to 23in. swing |
| 1994 |
Romi |
Tormax 20-10 |
Good |
sold |
Photo /
More Info. |
| Heavy Duty 22" x 70" Lathe: Swing over bed: 22"
Swing over Cross Slide: 13"
Center Distance: 70"
Taper Attachment
Trax-2 axis readout
QC Toolpost
Coolant
Steady& Follower Rest
3" Spindle bore
15" 3-Jaw Chuck |
|
| Ad # 15600 | Heavy Duty Large Lathe 24in. & over swing |
| 199? |
Longem |
LG26120C |
Good |
sold |
Photo /
More Info. |
| 26" swing x 120" centers: Longem 26 x 120" manual gap bed lathe #LG26120
swing over bed 26",over crosslide:15.5"
D1-8 camlock spindle
inch/metric threading
10 hp main motor
center dist:120"
spindlle bore:4-1/8"
taper attachment
steady rest: up to 12" max
spindle rpm:13-1600rpm:24speeds
swing in gap:34"
chucks: 3 jaw 16" dia,4 jaw 20" dia
note:no tooling nor tool post not included,rapid traverse on bed needs new engage switch |
|
| Ad # 15929 | Heavy Duty Large Lathe 24in. & over swing |
| 1974 |
leblond |
7H |
Fair |
sold |
Photo /
More Info. |
| 36 x 72": leblond H7 manual lathe,raised headstock type
swing 36" over bed ways,30" over cross slide
center distance: 72"
3" spindle bore
includes: 15" 3 jaw chuck,18" 4 jaw chuck
steady rest
servo shift
inch threading
travel dial on z bed
|
|
| Ad # 8550 | Hollow Spindle/Big Bore Engine Lathes |
| 2006 |
GMC |
GT-1860DB |
Excellent |
Sold |
Photo /
More Info. |
| 18 swing x 60 centers: Featuring:
ISO 9001 certified
Large spindle bore 3-1/16”
Heavy Duty spindle D1-8
One-piece solid cast iron machine base
Heavy Duty guideway width 11 13/16”
Heavy Duty main motor 7.5HP
12 spindle speeds from 24-1,600 rpm, speeds: 24/ 32/ 55/ 70 / 95/ 160 / 240/ 320/ 550 / 700 / 950 / 1,600 rpm
40 kinds of inch threads, and 41 kinds of metric threads
Threading and feeding rate change without changing gears
Automatic kick-out longitudinal carriage stop system
Spindle is balanced, hardened and precision ground
Spindle is supported at 3-point by high precision bearings
All gears and shafts are hardened and precision ground
Guideways induction hardened and precision ground
Automatic lubrication system in headstock and feed box
Standard Accessories:
Free Taper turning attachment, , installed
10” 3-jsw chuck with set reversible jaws
12” 4-jaw chuck with set reversible jaws
16” Face plate
10” drive plate
5 1/2” large steady rest
3” follow rest
Removeable gap
4-way tools post
Foot brake
Work light and coolant system
Manual Lube pump on apron for all guideways
Automatic kick-out longitudinal carriage stop system
Full length splash guard
(2) dead centers and (1) reducing sleeve
Thread chasing dial
Tool box
Specifications: GT-1860DB
GT-1860DB
Max. swing over bed 18”
Max. length of workpiece 60”
Max. swing over cross slide 11-5/16”
Max. Swing in gap 25 3/16”
Width of Bed 11 13/16”
Effective length in gap to spindle 10 ¼”
Effective length in gap to chuck jaws 3”
Spindle bore 3-1/16” , D1-8
Taper of spindle center M.T.# 6
Spindle speeds 24-1,600 rpm / 12 steps 24/ 32/ 55/ 70/ 95/ 160/ 240/ 320/ 550/ 700/ 950/ 1600 rpm
Longitudinal feeds 0.0012-0.0252 IPR, 42 kinds
Cross feeds 0.0006-0.0126 IPR, 42 kinds
Inch threads 56-2 TPI, 40 kinds 56, 52,48, 46, 44, 40, 36, 32, 28, 26, 24, 23, 22, 20, 18, 16, 14, 13, 12, 11-1/2, 11, 10, 9, 8, 7, 6-1/2, 6, 5-3/4, 5-1/2, 5, 4-1/2, 4, 3-1/2, 3-1/4, 3, 2-7/8, 2-3/4, 2-1/2, 2-1/4, 2
Metric threads 0.4-14 mm , 53 kinds
Module threads 0.4-7 mm, 32 kinds
Diameteral pitch threads 32-4 DP , 32 kinds
Max. travel of top slide 5”
Max. travel of cross slide 12”
4-way tool post size 1” x 1”
Longitudinal leadscrew diameter / pitch 1-1/2” / 4 PTI
Max. weight of workpiece 800 LBS
Max. travel of tailstock quill 4-3/4”
Diameter of tailstock quill 2-1/8”
Taper of tailsotck quill center M.T. # 4
Main motor 7.5 HP, 220V/440V, 3 phase, prewired on 220V
Coolant pump motor 1/8 HP, 220V/440V, 3 phase, prewired on 220V
Net weight, approx. 5,950 LBS
Overall dimensions, LxWxH 88” x 41” x 108”
|
|
| Ad # 13311 | Hollow Spindle/Big Bore Engine Lathes |
| 60's ? |
Warner Swasey |
# 4A / M-1190 |
Good |
sold |
Photo /
More Info. |
| 7-3/4" bore : 30" swing over ways: Warner Swasey # 4A big bore Turret Lathe
30" swing over bed ways, 20" over half cross
slide
50" center distance
Spindle Bore :7-3/4"
22" Dia 3 jaw chuck W'/ 7.5" thru hole
RPM: 8-211
HP : 15?
6 position turret
rigging/loading fee 1200.00 adder |
|
| Ad # 14621 | General Purpose Lathe 15in. to 23in. swing |
| 2007? |
Summit |
1660B |
Good |
sold |
Photo /
More Info. |
| —: Summit heavy duty 1660B lathe
16" swing over bed ways,9.3"over cross slide
center distance: 60"
spindle speed: 20-2000 RPM
spindle: D1-8?
tailstock: 5MT
10HP main motor
coolant
gap bed : 25" swing in gap
3" spindle bore
inch/metric threads
newall dro system-2 axis
rapid traverse
taper attachment
10" 3 jaw chuck
Standered Features
•Clutched headstock
•All cast iron construction
•Hardened & precision ground bedways
•Quick change gearbox cuts American (inch),
metric and module and diametrical pitch threads
•Rapid traverse on carriage (4 way joystick)
•2 Speed tail stock
•Large chrome alloy spindle with big 3″ thru hole
•Hardened and ground alloy steel gears, shafts
and splines
|
|
| Ad # 14613 | Vertical Turret Lathe (VTL) |
| — |
Bullard |
50" |
Fair |
sold |
Photo /
More Info. |
| 50" chuck: bullard Vertical turret lathe
chuck size: 50"
side arm acc
note: has not been run in a few years but
was working when last used. |
|
| Ad # 14612 | Heavy Duty Large Lathe 24in. & over swing |
| — |
Best & miles |
50" x 90" |
Fair |
sold |
Photo /
More Info. |
| 50"swing x 90" centers: Best & Miles manual lathe
capacity: 50" swing over ways
center distance: 90"
20" steady rest
tailstock
20HP
220/3
note: has not been used in years but ran
when
last used... |
|
| Ad # 10248 | Heavy Duty Large Lathe 24in. & over swing |
| 1975 |
EX-CELL-O |
XD630N |
Good |
Sold |
Photo /
More Info. |
| 28 swing x 252"bed -metric machine: 28 swing over bed, 16" swing over cross slide
252" bed length =21ft
metric dials-
12" 3 jaw chuck
3-1/4" spindle bore
no gap in bed
5MT tailstock
rapid traverse on carriage
coolant
no readout(DRO)-will be removed
4 way toolpost
|
|
| Ad # 9278 | Tool Room Lathe 8in. to 14in. swing |
| — |
Okuma |
LK |
Very Good |
Sold |
Photo /
More Info. |
| Collet Lathe -350mm x 800mm-14"x 30": 350mm (14")swing over ways x 800mm (30")centers
Lever style collet closer
QC toolpost
travel dial on bed
inch/metric threads
amp meter on headstock
Specs
12" swing over ways , 7-3/4" over cross slide
30" centers
Spindle Nose: A-1 verify?? |
|
| Ad # 15118 | Tool Room Lathe 8in. to 14in. swing |
| ? |
Supermax |
LG-1340 |
Good |
sold |
Photo /
More Info. |
| 13"swing x 40" centers: Supermax # LG-1340 engine lathe
Capacity: 13" swing over ways x 40" centers
Acu-rite Digital readout
QC toolpost
3 jaw chuck
6" six-jaw chuck, tool post, tail stock, coolant,
splash guards, 1-1/2" hole through spindle, in/mm
threading, 3 hp, 220/440V |
|
| Ad # 14562 | Second Operation |
| 80's? |
Elgin |
2nd operation |
Good |
sold |
Photo /
More Info. |
| 7" swing ?: Elgin second operation turret lathe
7" swing-verify?
lever operataed 5C collet closer
lots of tooling included
step pully speed change
vert tight high tolerance machine-runs well
loading/rigging fee: 750.00 |
|
| Ad # 16001 | Heavy Duty Large Lathe 24in. & over swing |
| 1996 |
Poreba |
TRP93/3M |
Good |
sold |
Photo /
More Info. |
| 36" x 118" Poreba Heavy Duty Engine Lathe: Swing over Bedways: 36"
Swing over Cross Slides: 25"
Swing over (Removable) Gap: 45"
DBC: 118"
Hardened Ways
No taper attachment
Have gap for bed not shown
Wired 220/3
Inch/Metric Threading
Spindle Speeds: 7.1 - 710 rpm
Spindle Bore" 3-5/8"
Spindle Power: 35 hp 220/440 volts
Also Includes: electrics
4-Way Tool Post
3-Jaw Chuck: 19" diam.
4-Jaw Chuck: 31" diam.
(2) 16" Capacity Roller Type Steady Rests
|
|
| Ad # 8185 | Centering Machines |
| — |
Giddings & Lewis |
MC-Endomatic |
Good |
sold |
Photo /
More Info. |
| Production Facing & Centering machine 6" Dia x 66" length: Production facing & centering machine
6" Dia bar capacity x 66" shaft length max.
uses 8" milling cutters
hyd. Vise
up to 3/4" shank drills
5HP drill motors
10HP milling motors
variable speed hyd. drive
|
|
| Ad # 11909 | Heavy Duty Large Lathe 24in. & over swing |
| 1987 |
Tos |
SN63C |
Good |
sold |
Photo /
More Info. |
| 25 swing x 157": 1987 Tos SN63C Lathe
25" swing over gap bed, 13" swing over cross slide
inch/metric threads
steady rest
followo rest
12" 3 jaw chuck
coolant
rapid traverse-needs motor voltage changed to 220/3 to run
3.5" spindle bore
10-100 rem/ min spindle speed
manuals |
|
| Ad # 11910 | Heavy Duty Large Lathe 24in. & over swing |
| 1977 |
Ponar-Wroclaw |
Tur-63 |
Good |
sold |
Photo /
More Info. |
| 24 swing x 72" centers: 1977 Ponar-Wroclaw Tur-63 Lathe
24" swing over bed, 14" over cross slide
18-1800 Rev/min
taper attachment
3" spindle bore
12" 3 jaw chuck
16" 4 jaw chuck
face plate
steady rest 12" & 6" |
|
| Ad # 8148 | Ram Type & Saddle Type Turret Lathes |
| — |
Warner & Swasey |
4A |
Good |
SOLD |
Photo /
More Info. |
| 28" swing x 50" centers: 28" swing over bed
24" Chuck
50" center dist.
4-212 RPM |
|
| Ad # 4398 | Ram Type & Saddle Type Turret Lathes |
| 1944 |
Monarch |
12"CKK |
Fair |
SOLD |
Photo /
More Info. |
| Quality built manual lathe14.5" x 30": 14.5" swing over bed
30" between centers
Inch threading
QC toolpost W/ misc holders
1.5" spindle bore
8" 3 Jaw chuck
taper attachment
13-560 RPM |
|
| Ad # 8134 | General Purpose Lathe 15in. to 23in. swing |
| 2006 |
Victor |
1640B |
Excellent |
Sold |
Photo /
More Info. |
| Manual Lathe 16 swing x 40 centers: Victor 1640B Engine Lathe
High quality lathe
Spindle supported at 3 points by precision bearings
One shot lubrication for aprone and slide way
Hardened and ground bed ways
Hardened and ground gears
Inch/Metric dual dials
Inch/Metric threading without changing gears
Full length foot brake
Rigid one piece cast iron base
Approx. weight - 4,110 lbs
Approx. dimensions - 106L x 37W x 62"H
Standard Accessories:Special Pkg
Face plate
Coolant pump, 1/8 HP
Full length splash guard
4 pos. Carriage stop
8" dia. 3 jaw chuck
10" dia. 4 jaw chuck
Steady rest
Follow rest
Halogen work light
4 way tool post
Specifications: 1640B Series w/ Special pkg.
Machines 1640B
Swing over bed 16.12"
Swing over cross slide 10.2"
Swing over gap 23"
Length of gap 11.3"
Center distance 40"
Width of bed 11"
Spindle hole 2.03"
Spindle nose Camlock D1-6
Spindle RPM 33-2000
No. of spindle speeds 16
Tailstock quill diameter 2"
Tailstock taper, Morse MT 4
Tailstock quill travel 4.6"
INCH threads 2-56 TPI x 32
METRIC threads 0.45-7mm x 32
Main motor, AC 7.5 HP
Options included: Newall 2 axis readout, Quick change toolpost with 6 holders
|
|
| Ad # 7093 | Tool Room Lathe 8in. to 14in. swing |
| 90 'S ?? |
Nardini |
TT1030E |
Good |
Sold |
Photo /
More Info. |
| 12" Swing x 30" centers-Manual Lathe: 12" swing over ways, 6" over crosslide
30-35" center distance
6" 3-jaw chuck(D1-4)
collet closer -lever type
DRO-2 axis Mitsutoyo
no gap in bed
inch/metric threads
1" spindle bore
taper attachment
Toolpost????
3 HP |
|
We found 46 matching ads. Now displaying the remaining 46 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 1619 | CNC Parts and Accessories |
| 90's |
Erowa |
12" x 12" |
Very Good |
SOLD |
No Photo /
More Info. |
| Vacuum Pallet Precission Fixture System: Control with Lock & Unlock ; 3 Pallets 12 x12" with Clamp Rails |
|
| Ad # 7033 | Vertical Machining Centers (VMC) |
| 2001Rema |
Fadal |
6030 |
Very Good |
sold |
Photo /
More Info. |
| Used Fadal CNC Mill :60 x 30 travels: Remanufacured by factory in 2001
10,000 RPM spindle
22.5 HP High torque
coolant thru spindle
top cover
40 taper
servo coolant
remote pulse generator
rigid tap
remote jog wheel
4 meg memory
3.5" floppy disc
work light
box ways
table size : 30" wide x 62.5" long, used sub plate
air blast
21 station tool changer
control:Fadel muliti processor
|
|
| Ad # 8066 | CNC & Retrofit Knee / Bed Mills w/o ATC |
| 80's ?? |
Bridgeport |
Series 1 CNC |
Good |
sold |
Photo /
More Info. |
| 3 axis cnc knee mill-bridgeport 3series 1 w/ centroid control: upgraded centroid control-cnc # 4
3 axis cnc knee mill-bridgeport series 1 w/ centroid control
RS232
floppy drive
mist coolant
no manual hand wheels for table
2 hp
0-4200 RPM
|
|
| Ad # 15972 | Vertical Machining Centers (VMC) |
| 1994 |
Hurco |
BMC 20LR |
Good |
sold |
Photo /
More Info. |
| 24" x 14 x 16" travels: Hurco #BMC 20lR vertical machining center
Travels: 24" X,14" Y,16" Z
hp:10
table size:33.8" x 15.7"
load table:550lbs
spindle: cat 40
tool changer :16 stations
this machine is under power. 6000 rpm spindle. Tooling on mill table goes with it.
The floppy drive does not work! It has conversational programing with separate graphics screen. The riggers quoted me $1760 loaded on truck. Additional $200 if they carry it back to there place for loading at another time. $100 per month for storage. Let me know if you need something else |
|
| Ad # 9036 | CNC & Retrofit Knee / Bed Mills w/o ATC |
| 2001 |
Atrump |
B3VC |
Very Good |
Sold |
Photo /
More Info. |
| bed mill-3 axis: -ATRUMP B3VC CNC BEDMILL
-TRAVEL X: 31 1/2" Y: 16" Z: 18 1/2"
-R-8 SPINDLE
-PNUEMATIC DRAWBAR
-SPINDLE SPEED 50-4000
-SPINDLE MOTOR 3HP, 3PHASE 220V
-M15 CENTROID CONTROL -110V
-MULTIPLE WORK COORDINATE SYSTEMS
|
|
| Ad # 14399 | CNC & Retrofit Knee / Bed Mills w/o ATC |
| 2002 |
Atrump/top-one |
10B |
Good |
sold |
Photo /
More Info. |
| travels are X31.5 x Y19 x Z21 x Manual Quill 5”travel: Atrump/Top One manual/cnc bed mill
manual or cnc quill control
control:centroid #M400
14" x 52" table
travels are X31.5 Y19 Z21
Quill 5”
control: centroid M-400
spindle : 40 taper NMTB
5 HP motor
auto lube
air draw bar
note: a few holders tooling included
1/4”
(2) 3/8”
(2) 1/2”
(2) 5/8”
(2) 3/4”
(1) 1”
(1) shell mill with 1” arbor
(1) shell mill with 1-1/4” arbor
no vise included
this machine is full 3 axis: manual axis
control or cnc control with
conversational or g code programming
capability on a great easy to use centroid
control,runs good ready to go!
|
|
| Ad # 13642 | Horizontal Machining Centers (HMC) |
| 2000 |
Heller |
MC25 |
Good |
sold |
Photo /
More Info. |
| travels: 800mm(31.5") x 800mm(31.5") x 800(31.5): Heller MC25 Horizontal Machining center
Please verify actual machine specs
main spindle motor:40 HP
travels: 800mm(31.5") x 800mm(31.5") x 800(31.5)
table size/pallet size: 500mm(19.7) x 630mm(24.8")
GENERAL DESCRIPTION CNC CONTROL-Siemens Sinumerik 840D control
MACHINE TYPE:HORIZONTAL MACHINING CENTER
COLUMN CONSTRUCTION MULTI/BRIDGE
COLUMN STYLE TRAVELLING
WORK SUPPORT BED
MAIN SPINDLE TOOLING
TYPE FIXED
DIRECTION HORIZONTAL
TAPER spindle: SK40
Max Spindle RPM 6000
No. of RANGES 1
No. of SPINDLES 1
HORSEPOWER 40.00
ARTICULATED AXIS None
"U" AXIS None
PRIMARY TOOL CARRIER ATC
TOTAL NUMBER of TOOLS 40 verify?
MAX. TOOL LENGTH 15.748
MAX. TOOL DIAMETER 2.830
MAX. TOOL WEIGHT 26.00
TOOL CHANGE TIME --
CHIP-to-CHIP TIME 3.80
HEAD CHANGER None
WORK SUPPORT AXIS SPECIFICATIONS
TABLE SIZE L:24.800 X W:19.685
MAX. WEIGHT OF WORKPIECE 1760
AUTO. PALLET CHANGER Std.
No. of PALLETS 2
INDEX TABLE Std.
INDEX TABLE DEGREES 90.00
ROTARY TABLE Opt.
DUAL AXIS ROTARY TABLE None
No. of AXES: 3 (Options: 4, 5) AXIS TRAVEL RAPID TRAVERSE CUTTING FEED
X1 (Std.) 31.496 Inch 2362 IPM --
Y1 (Std.) 31.496 Inch 2362 IPM --
Z1 (Std.) 31.496 Inch 2362 IPM --
B (Std.) 360.000 Deg. -- --
Note: no tooling included
2 units available for sale
rigging/loading fee 3200.00 each |
|
| Ad # 4126 | Vertical Machining Centers (VMC) |
| New |
Victor |
VMC 2615 |
Demo Machine |
sold |
Photo /
More Info. |
| Victor VMC-2615 Machining Center w/ Fanuc 0-M: Travel (X) 19.7"
Travel (Y) 15.8"
Travel (Z) 15.8"+3.94"
Spindle Motor 3.5kw (cont)5,5kW (30 min)
Spindle RPM 60-6,000 rpm
No. of Tool Pos. 16 24 20
Accuracy ±0.00039”
Repeatability ±0.00012”
Number of Tools 16
Tool Holder Taper 40
Max. Tool Weight 15.4 lbs.
Max. Tool Length 9.84"
Max. Tool Diameter 3.15"
|
|
| Ad # 4125 | Vertical Machining Centers (VMC) |
| New |
Victor |
FV-32A |
Demo Machine |
sold |
Photo /
More Info. |
| Victor FV-32A w/ Mitsubishi M3 Control: Travel (X) 31.5"
Travel (Y) 17.7"
Travel (Z) 20"
Spindle Motor 7.5 HP/10 HP (cont./ 30 min.)
Spindle RPM:Standard 60-6,000 rpm (Belt type);
Opt.: 100-10,000 rpm (Belt type) & 100-12,000 rpm
(Belt type)
No. of Tool Pos. 18 20
Accuracy +0.0005”
Repeatability +0.0001”
Tools: 20
Tool shank: Taper 40
Max. Tool Weight: 13.2 lbs.
Max. Tool Length: 3.8"
Max. Tool Diameter: 3.1"
Tool Change Time: 3.5 seconds
|
|
| Ad # 14374 | Horizontal Machining Centers (HMC) |
| 11/1993 |
Mori Seiki |
MH-40 |
Good |
sold |
Photo /
More Info. |
| 16" x 16" pallet size : 1993 Mori Seiki MH-40 Horizontal machining center
dual pallet system
control: Fanuc MF-M5
16" x 16" pallet size
travels: 20" X,22" Y,20" Z
B-Axis: 1 degree inc.
thru spindle coolant
toolchanger : 40 stations
spindle: 40 taper
spindleRPM: 7000 max
motor: 15HP
rs232 port
chip conveyor w/ skimmer
cut time: 9657 hrs as of 10/17/14
operation hrs: 15,300 as of 10/17/14
includes all books & manuals
Machine is in good running condition-ready to go |
|
| Ad # 2131 | Horizontal Machining Centers (HMC) |
| 1977 |
Monarch |
HMC-100 |
Good |
sold |
Photo /
More Info. |
| Horizontal CNC Machining center: Original NC control -
retrofitted to CNC Fanuc GN11 control
Travels-72x, 30"y,20" z
Table -70" x 28"
24 tool ATC
5" spindle
4th axis indexer included-22" x 22"
RS 232 port for offline programming
69,554 HRS on time
Much tooling included
Manuals
Approx 25HP
|
|
| Ad # 7936 | CNC & Retrofit Knee / Bed Mills w/o ATC |
| 2007 |
Atrump |
3VK (2+1) |
New |
Sold |
Photo /
More Info. |
| CNC/Manual Knee Mill 10" x 50" table(single phase): ATRUMP Aone 3VK 2plus1
MODEL # 3VK 2+1
5HP Spindle Motor & inverter upgrade(single phase)
30 NST Spindle Taper
5,000 rpm spindle speed
Auto Lubrication
Coolant System w/Chip Tray
Machine finished in Taiwan
MACHINE FEATURES-
Centroid control M400S
lMachine finished in Taiwan with China casting
5 HP Spindle Motor, R8 Spindle Taper
5,000 rpm spindle speed with HI-LO gear
Hardened & Ground with turcite-B coating guide way
lPrecision ballscrews for high accuracy and long casting
FC30 Meehanite Casting main frame with annealed & stress relieved for long term reliability
lAnti rust chrome quill
lBox ways design on Y-axis to provide maximum rigidity & stability
lStandard way cover on three axes
lTool box & Tools
lPrecision APEC class7 spindle bearing to ensure spindle run out within 0.0002
lAutomatic lubrication system
lBuilt-in Quartz work light
lHard limit switch
2-axis Constant CNC , plus 3rd axis scale & motor
Specification:
Table:10” x 50”
Longitudinal travel (X-axis):31”
Cross travel:14 1/2”
Z axis travel cnc quill:5” (manual), 4” (cnc)
Knee travel (manual): 16”
Quill diameter: 3.375” (86 mm)
Spindle nose to table top (D):0.75”-16.75” (20 - 426mm)
Load capacity:600 lb.
Spindle taper:R8
Spindle Speed (r. p.m.):70 to 5000 rpm with Hi/Lo gear
Transmission of spindle & motor: Timing Belt
Spindle center to column front surface:6.875” to 27.875” (175 - 707mm)
Head:
Swivel (left/right):90 degree
Tile (front/back):45 degree
Motor:
Spindle motor/max torque:
3 HP (Std.) 5 HP (Opt.) included (single phase)
KVA rating: 4 KVA, 15 amps
Coolant pump (optional)1/8 Hp-added
Lubrication pump:Automatic
Power requirement:4 KVA, 3 Phase 208-230 voltage
Length X Width X Height (LXWXH):102” x 77” x 84”
Net Weight:3,100 lbs. (1420 Kgs)
|
|
| Ad # 10693 | CNC & Retrofit Knee / Bed Mills w/o ATC |
| 2001 |
Sharp |
LMV-50/MP-3 |
Excellent |
sold |
Photo /
More Info. |
| 3 axis -Acu-rite mill power : 3 Axis Acu-rite Mill Power unit-new style on a sharp mill
manual or cnc control
simple conversational programming
travels: 12" x 34"
3 hp
R-8 spindle
air draw bar
auto lube
9 x 50 table
|
|
| Ad # 10694 | CNC Horizontal Boring Mills |
| 2007 |
Tos Varnsdorf |
WHN13 |
Very Good |
Sold |
Photo /
More Info. |
| 5.118" spindle; travels: 98"Y, 49Z ,137 X: TOS VARNSDORF WHN13/HORIZONTAL BORING MILL
480/3 voltage
all manuals
no tool changer
>Spindle diameter 130mm (5.118")
>Increased vertical travel "Y" to 2500mm (98.42")
>Longitudinal travel "Z" to 120mm (49.21")
>Increased cross "X" travel to 3500mm (137.79")
>Rotary table S12 with table load 10,000kg (26,448 lb)
>Increased table size 1800 x 2250mm (70.86 x 86.61")
>CHOV 13 - 20 Bar through spindle coolant
>Compressor coolant system
>Compensation of spindle temperature expansion
>Standard chip conveyor for coordinate x=3500mm
>Heidenhain iTNC 530 controller -conversational or g code programming
432 run time hrs as of 9-2010
thru spindle coolant
CAT 50 taper spindle
chip conveyor
4th axis indexing table
foundation: 4-5ft of concrete slab
pit required-w 5ft of concrete under machine
coolant 300PSI w/ paper filter system
will take 3 trucks to move -will need dissasembled-buyer to pay all dissassemble/rigging and freight -rigging fee to load $7500.00 |
|
| Ad # 14288 | CNC Horizontal Boring Mills |
| — |
Giddings & Lewis |
PMC-50 |
Needs Work |
sold |
Photo /
More Info. |
| travels: x-7' x y-6' x z-7ft: Gidding & Lewis CNC Horizontal boring mill
spindle: 5" dia
spindle taper: 50
travels: x-7' x y-6' x z-7ft
table size: 6ft x 4ft
note: was retrofitted with Heidenheim
control and used very little in many years will
need some tlc to get up and running again. |
|
| Ad # 10657 | CNC & Retrofit Knee / Bed Mills w/o ATC |
| 2000 |
Acer |
E1350B |
Excellent |
sold |
Photo /
More Info. |
| 13 x 50 table, 40 taper: 13 x 50 table
travels: 32" x 20 x 23"
0-3750 RPM
Auto lube
Work Light
coolant
splash guard
table load 1500Lbs max
NST40 taper spindle
Manual pulse generator-XYZ
floppy drive
AC brushless servos
manual hand wheel on y axis only
Sony Millstation Control-features below
3 axis contouring: built in 25 machining cycles:
pocket, drill, frame, o-ring, island, facing, many
more..1 gig hard drive, windows 95 operating
system, color LCD display, graphic interface,
conversational programming, or G code generated
from cad cam, morror image, , rotate, scaling,
repeat, trig assist,
EVS Acer head
can rotate head left to right, not in /out
Air power draw bar
5HP |
|
| Ad # 14242 | Vertical Machining Centers (VMC) |
| 1997 |
Bridgeport |
VMC800 |
Good |
sold |
Photo /
More Info. |
| Travels 31.5" x 20.1" x 19.7": 1997 Bridgeport VMC800 machining Center
Travels 31.5" x 20.1" x 19.7"
22 ATC
6000 RPM
40 Taper
DX-32 Control(siemens)
Rigid Tapping
Full Machine Specifications
15 HP spindle motor
tooling shown included
All manuals
Note: monitor crt went out so replaced
with a
flat panel-shown
Note:loading/rigging fee onto flat bed:
$1200.00
|
|
| Ad # 14748 | CNC & Retrofit Knee / Bed Mills w/o ATC |
| 1999 |
HH Roberts |
BM-40-Q1 |
Good |
sold |
Photo /
More Info. |
| 10 x 50 table: HHRoberts BM-40-Q1 CNC Bed Mill
10 x 50 table
3/5HP spindle motor
Coolant system or Mister
Auto Air Tool Changer
Serial# 877676, PO 1837 11.98
DOM: 07.1999
Anilam 5300 MK CNC Control
TILTING QUILL
AUTO OILER FOR WAYS & BEARINGS
G-Code, Manual, Conversational, & CAM
230 VAC Single Phase or 230 VAC 3 Phase
10 HP Motor, 21 Amps
Price includes all tooling, as following:
- KURT D688 Manual Vise, 6" w/ 8.8" opening
- PRECISION OFFSET HEIGHT SET & EDGE FINDER CNC
MILL MILLING
-8" Master Precision level
-Spray Mist Unit for Cutting and Grinding
Applications
-GRANITE CHECK STAND SURFACE PLATE & DIAL
INDICATOR GAGE
-(58 PC) 5/8" Slot 1/2" Stud HOLD DOWN CLAMPING
SET KIT
-KURT Precision DIAL INDICATOR +MAGNETIC BASE
FINE ADJUSTMENT+22 POINT SET + CASE
-(6 PC) 1-2-3 Block Set 0.0001" Precision
Matched Mill Machinist 123 23 Holes
-CAT40 CNC TOOL HOLDER TIGHTENING FIXTURE
-HAAS CAT40 TOOLING PACKAGE ER32 ER16 COLLET
SET END MILL HOLDER DRILL CHUCK NEW
Including:
6 PC END MILL HOLDER
5 PC ER32 COLLET CHUCK
3 PC ER16 COLLET CHUCK
12 PC ER32 COLLET SET BY BOTH 1/16
7 PC ER32 COLLET SET COMMON SIZE
10 PC ER16 COLLETS SET BY 1/32
3 PC Keyless Drill Chuck 1/2"
With Free HAAS pull stud, can be used on any
HAAS cat40 spindle machine
SPANNER WRENCH ON COLLET CHUCK
ALL END MILL HOLDER, COLLET CHUCK AND DRILL
CHUCK ARE HIGH SPEED PROVED AND BALANCED TO G2.5 @
20K RPM TO MEET ALL INDUSTRIAL REQUIREMENT |
|
| Ad # 8591 | Vertical Machining Centers (VMC) |
| 1986 |
Mazak |
20/40B |
Good |
sold |
Photo /
More Info. |
| —: MAZAK
VQC – 20/40B 6 PALLET VERTICAL CNC
Pallet Size (6):49.5" x 22"
X Travel40
Y Travel20
Z Travel26
RPM6000
ATC30
Controller:MAZATROL CAM M2
Factory Specs:please verify below
Travel: X-Axis 39.4"
Y-Axis 20"
Z-Axis 18.1"
Table Size 48.8" x 21.56" (6)
Spindle Speed 42 - 6000 RPM
Main Motor 7.5 HP
Spindle Taper Cat 40
Tools 30
Spindle Nose to Table Top 7.8" - 25.9"
Table Load Capacity 1764 lbs.
Rapid Traverse Rates 551 / 472 IPM
Max Tool Diameter 3.94"
Max Tool Length 11.8"
Max Tool Weight 17.6 lbs.
Machine Dimensions (L x W) 118.8" x 98.4"
Machine Weight 11,700 lbs.
FEATURES:
MAZATROL M-2 CNC CONTROL
14" Color CRT
Conversational Programming
Graphic Display
Auto Six Pallet Changer
Auto Tool Length Measurement
|
|
| Ad # 8573 | Vertical Machining Centers (VMC) |
| 1981 |
Westway/Kasuga |
V2 |
Needs Work |
Sold |
Photo /
More Info. |
| 48 x 12" table: table size: 48 x 12"
3 HP
30 taper spindle
tool changer 24 tools
3 axis Summit/Dana Quick draw 21 control
step pulley head
auto lube
|
|
| Ad # 12494 | Vertical Machining Centers (VMC) |
| 1996 |
Cincinnati milacron |
Arrow 500 |
Needs Work |
sold |
Photo /
More Info. |
| 16" x 20": Cincinnati Milcaron Arrow 500E
Aeramatic 2100 Control
TABLE SIZE 27.5" x 20.5"
MAX. TABLE LOAD (EVENLY DISTRIB.) 770 LBS
SPINDLE NOSE TO TABLE TOP 5" - 25"
X AXIS TRAVEL 20"
Y AXIS TRAVEL 20"
Z AXIS TRAVEL 20"
RAPID TRAVERSE RATE ALL AXES 630 IPM
CUTTING FEED RATE ALL AXES 0.1 - 472 IPM
SPINDLE SPEEDS 0 - 6,000 RPM
SPINDLE TAPER CAT 40
max hp RATING)-12.5 HP
TOOL CHANGER CAPACITY 21 STATIONS
MAX. TOOL WEIGHT: 15 LBS
APPROX. DIMENSIONS: 83" x 83" x 106"
APPROX.weight 7,000 LBS
manuals
note:needs a new board -missing...could be fixes or make a good parts machine |
|
| Ad # 10527 | Vertical Machining Centers (VMC) |
| 1995 |
Shizuoka |
GRA-Fighter CM-200 |
Excellent |
sold |
Photo /
More Info. |
| Graphite mill: SHIZUOKA CNC GRAPHITE MACHINING CENTER
MODEL: "GRA-FIGHTER" CM-200
MFG. IN 1995, SOLD NEW IN 1999
FANUC 16M CNC CONTROL
X-11.8", Y-8", Z-6"
10,000 RPM, BT-30 TAPER
8 POSITION ATC
EXCELLENT CONDITION!
|
|
| Ad # 10526 | Vertical Machining Centers (VMC) |
| 1994 |
Haas |
VF-3 |
Good |
sold |
Photo /
More Info. |
| —: 1994 Haas FV-3
Control Haas
Table Size 48" x 18"
Travels 40" x 20" x 25"
Taper CAT#40
Spindle Speed 7500 RPM
Main Motor 15 HP
Number of Tools 20 ATC
|
|
| Ad # 14682 | Vertical Machining Centers (VMC) |
| 1992? |
Kitamura |
Mycenter 1/485 |
Good |
sold |
Photo /
More Info. |
| 19 x 13 x 16 travels: 1992 Kitamura -Mycenter 1/485
machining/drilling
center
travels:19" x 13 x 16"
control: Fanuc 0M
spindle taper: BT35 taper
4th axis ready-no indexer included
flood coolant
13,000 rpm spindle speed
rs232 port
note: includes approx 20 holders
pictured/vises
not included |
|
| Ad # 14666 | CNC & Retrofit Knee / Bed Mills w/o ATC |
| 80's? |
bridgeport |
series 1 |
Good |
sold |
Photo /
More Info. |
| 9 x 42" table: bridgeport mill w/ 2 axis proto-track cnc
control
manual or 2 axis cnc operation
vari speed head 50-4500rpm
9 x 42" table
2 hp spindle motor
proto trak unit #15020
3 axis dro
R-8 spindle |
|
| Ad # 11331 | Vertical Machining Centers (VMC) |
| 1994 |
Haas |
VF-3 |
Good |
Sold |
Photo /
More Info. |
| 40 x 20 travels: Haas VF-3 Machining center
includes 4th axis haas unit shown-no tooling or vises
Includes: ridged tapping, macro, mist coolant, exp memory, programable coolant nozzle & chip auger
Work Table 18 x 48"
Max Weight-table 3500 lbs
Spindle Taper CT40
Spindle Speed to 10,000 rpm-verify?
Transmission 2 Speed Geared Head
Spindle Motor 15 hp
Axis Travels
X Axis 40"
Y Axis 20"
Z Axis 25"
Tool Changer 20 Tools
Max Tool Diameter 3,5"
Max Tool Weight 12 lbs
Machine Weight 13,500 lbs
|
|
| Ad # 4865 | CNC & Retrofit Knee / Bed Mills w/o ATC |
| ? |
Ex-cell-o |
602 |
Good |
Sold |
Photo /
More Info. |
| 3 Axis CNC Knee Mill retrofit : 9" x 42" table
2HP motor
85-4,000 RPM variable speed head
NMTB 40 taper spindle W/ 7 holders, collet & end mill with collets for holder included
spray mist & flood coolant
3 Axis CNCC control: Artisan-AH,AH software version 3.1T- Std.PC drven-included
No manual hand wheels on machine, cnc/control only
G-code programming with suroutines, canned cycles & macros in software for common cutter paths
Dove tail ways in very good condition
auto-lube system
Vise shown not included
|
|
| Ad # 13991 | CNC & Retrofit Knee / Bed Mills w/o ATC |
| 2008 |
Acer |
EVS-5VK-54 |
Excellent |
sold |
Photo /
More Info. |
| 10 x 54" table: 40 taper: Acer 5VK Knee Mill W/Acu-rite 3 axis millpower control
ULTRA HIGH QUALITY ACER E-MILL™ MILLING
MACHINE:
• 5 HP “Super E” Baldor Motor
• Infinite 60 ~ 4,500 RPM Speed AC Frequency Drive
• HRC 52° Hardened and Ground Table
• Turcite-B Coated Guideway
• Precision Spindle w/ ABEC-7 Bearings
• Meehanite Casting
• Automotive Paint
• Milling Head with Tilting Mechanism
• Rugged 10” x 54” Table Size
• 1” Diameter Ball Screws with Casted Mounting Brackets
• Hardened & Ground X, Y, & Z, Table Top and Bottom to
HRC 52°
• Dual Knee, Table, and Saddle Locks
• spindle Taper N.S.T. #40 Taper (5VK model)
• Class 7 Precision Spindle Bearings
• Precision 3-3/8” Diameter Hard Chromed Quill at HRC 62°
• Turcite-B Lining Saddle Ways to Reduce Metal Wear
• Auto-Lubrication
• Max. Load on Table is up to 900 lbs.
CONTROL SOFTWARE FEATURES:
- Abs/inc - Hole Patterns (bolt circle, array, frame, row)
- Tool Library - Repeat, Rotate, Mirror Image, Engraving
- Inch / Metric - Position / Drill
- Polar / Cartesian - Lines / Diagonals / Arcs
- Rectangle (pocket, frame, slot, face) - Blends (corner
radius)
- Circle (pocket, frame, ring) - Explode and much much
more…
- Custom Pockets
note:includes tooling shown, auto lube, air power draw bar,
remote pendant or machine mountable control,power knee
feed
Note: very good condition little use... |
|
| Ad # 15787 | Horizontal Machining Centers (HMC) |
| 2002 |
Okuma & Howa |
M-630H |
Good |
sold |
Photo /
More Info. |
| X-40", Y-32", (2) 24.8" Pallets, Fanuc 16M,: Okuma & Howa # M-630H
Horizontal machining
center with lots of tooling over 10k worth included-see picture
Std mfg specs below-please verify
actual machines
SPECIFICATIONS:
X-Axis Travel 1016 mm (40")
Y-Axis Travel 820 mm (32")
Z-Axis Travel 820 mm (32")
B-Axis Rotation 0.001 Degree
Pallet Size (2) 630 mm x 630 mm
Pallet Work Weight Capacity 1198 KG
Spindle Nose to Table Distance 150mm-970mm
Spindle to Table Center Distance
80 mm-900 mm
Spindle Speed: 60-10,000 RPM
Spindle Drive Motor 30 KW
Spindle Taper: 50
Number of Tools: 80 ATC
Rapid Traverse: 29997 mm/min
Feed Rate: 11989 mm/min
Aprroximate Dimensions:
5055 mmx3759 x mmx3404 mm
Weight: 16010 KG
Equipped With:
Fanuc 16M CNC Control
(2) 630 mm x 630 mm Pallets w/
Auto Changer
Spindle Air Blower
Spindle Oil Cooler
Enclosed Splash Guards
Chip Conveyor
std. mfg US SPECIFICATIONS:
X-Axis Travel .. 40.0"
Y-Axis Travel .. 32.3"
Z-Axis Travel... 32.3"
B-Axis Rotation .001 Degree
Pallet Size (2) 24.8" x 24.8"
Pallet Work Weight Capacity :2640 Lbs.
Spindle Nose to Table Distance 5.91"-38.19"
Spindle to Table Center Distance 3.15"-35.43"
Spindle Speed 60-10,000 RPM
Spindle Drive Motor 40 HP
Spindle Taper 50
Number of Tools 80 ATC
Rapid Traverse 1181 IPM
Feed Rate 472 IPM
Aprroximate Dimensions 199"x148"x134"
Weight 38,972 lbs.
Note:rigging,dismanteling , prepare for shipping & loading onto flat bed truck fee : estimated.
: $9800.00...adder
Note:will not fit into std.overseas shipping container... |
|
| Ad # 15767 | Vertical Machining Centers (VMC) |
| 2001 |
Fadal |
VMC 15/914 |
Good |
sold |
Photo /
More Info. |
| travels:20 x 16 x 20z: 2001 Fadel VMC 15/914
mist collector
tool changer-20 tools
cat 40 taper
some tooling holders included as shown
control:CNC 88
std mfg specs below-please verify actual machines
X-Axis Travel: 20"
Y-Axis Travel: 16"
Z-Axis Travel: 20"
Rapid Feed Rates: 400 IPM
spindle HP: 7.5
Table Size: 29.5" x 16"
(3) T-Slots: .562" x 4.33"
Max Table Load Capacity: 750 Lbs
Spindle Speed:75- 7,500 RPM
Spindle Taper: CAT40 |
|
| Ad # 13915 | CNC & Retrofit Knee / Bed Mills w/o ATC |
| 2006 |
Atrump |
E422 |
Good |
sold |
Photo /
More Info. |
| X travel 41.5", Y travel 22": CNC Vertical Mill Atrump E422 with DynaPath
Control Center.
Machine comes with:
Leveling pads & bolts
Tool kit
Work light
10 HP inverter drive motor
Full 3 axis Dynapath-delta 2000 CNC Control
with
graphic 12" color LCD
Coolant Pump
Cat 40 spindle
AC Axis servos
Table splash guard
Y&Z axis way covers
Automatic machine oiling
Several tools included for boring, decking,
sleeving, etc.
Table: 18" x 49"
220 Volt 3 phase
10HP Spindle
Y travel 22"
X travel 41.5"
Z travel 24"
manual 4th axis index table-roll over
fixture
very low hrs.
no tool changer |
|
| Ad # 8254 | CNC & Retrofit Knee / Bed Mills w/o ATC |
| 2004 |
Acer |
3VK |
Excellent |
Sold |
Photo /
More Info. |
| 10 x 50 table : Year: 2004
Make/Model: Acer 3 VK Mill with Acu-Rite 2-Axis Control with 3-Axis Digital Readout
Condition: Excellent
Wired 220 single phase, can run 3 phase also
Serial #: On request
Machine Location:
Concord, NC 28027
Price:
General Description:
Acer Model 3 VK Knee Mill Features:
Infinitely variable speed spindle
3 HP, Spindle Drive Motor (Baldor Super "E")
Speed Range, Variable 60-4500 RPM
Variable Speed Operation
Table-10" x 50" (Table surface ground and hardened to Rockwell 58-60C)
Saddle, Ram, Table and Knee have Double Locks for eliminating Lateral Rocking Motions
Hardened and Ground ways on Column and Knee
Chrome Plated Screws on X&Y Axis movement with Double
Nut designed Back Lash elimination
Automatic lubrication system
Turcite "B" Lining on saddle ways, X&Y Movement
Class 7 Precision Spindle bearings insuring run-out of no more than .00015"
Necessary wrenches and manuals
Chrome plated Precision Ground Quill and Housing
Meehanite Casting Porcess Annealed to eliminate internal stress
Options included: Kurt D688 vise, collet set, table clamp kit,Kurt Air Power Draw Bar
MILLPWR CNC 2-Axis Contorl with 3-Axis Digital Readout
Control is menu driven with a prompted format providing new operators a very short "learning curve"
10" flat panel, color LCD display
Absolute or incremental programming
Cutter Radius Compensation
Scale Factoring
Part programming storage of up to 999 blocks of information on over 1,000 programs
Canned routines make it easy to program complicated but regular features in a simple and fast way. Included canned routines:
Rectangular and circular pockets and frames
Irregular pockets
Hole patterns
Bolt circles
Lines and rectangular arrays
The blend function allows the operator simple entry of corner radius saving programming time
Additional milling functions (island, ellipse and chamfer)
Inch/metric conversion
Absolute Zero Protection
Linear Error Compensation
Self Diagnostics
Emergency Stop Button
Basic calculator functions
Geometric calculator
Precision glass scales with closed loop feedback and constant home reference point
Tool table
Remote stop/go button
RS232 Port and Immediate Graphics feedback during programming for visual verification
Teach mode allows operator to make a part manually while CNC control "remembers" for automatic machining of subsequent parts
Improved editing capabilities with cut, copy and paste functions
DXF file input via RS232 port or floppy diskette
Built in reference tables (drill and tap sizes)
Comments:
Machine is in like new condition, very low hours
|
|
| Ad # 1842 | Vertical Machining Centers (VMC) |
| 1995 |
Supermax |
Max-3 Rebel |
Good |
sold |
Photo /
More Info. |
| Supermax VMC w/ 16station toolchanger: Table size: 16" x 30";
Travel 20"-Y
Spindle Speed: 5,000 rpm
Spindle Power: 5 hp
remote hand wheel-MPG
Cat 40 spindle
16 station ATC
flood coolant
Control: centroid M-400 |
|
| Ad # 14583 | Vertical Machining Centers (VMC) |
| 2007? |
Atrump |
Maxi-mill/E-216 |
Good |
sold |
Photo /
More Info. |
| travel: 26" x 16":Table:14.2” x 34.4” : Atrump Maxi-mill:#E-216
Travel:26" x 16":Table:14.2” x 34.4”
MACHINE FEATURES: std specs
Centroid M400 control with 15” LCD
16 tools ATC Armless umbrella style
7.5HP Spindle Motor,CAT40 Spindle Taper
6,000 rpm spindle speed
Hardened & Ground with turcite-B coating guide way
Double nut precision ball screws hardened & ground for high accuracy and long lasting
FC30 Meehanite Casting main frame with annealed & stress relieved for long term reliability
100% Laser tested for positioning accuracy & repeatability
Box ways design on Y axis to provide maximum rigidity & stability
Telescopic steel way cover on three axes
Coolant System and air blast system
Central lubrication system
Built-in Quartz work light
Rigid tapping
RS232 & USB ports
control:centroid cnc software V10- V2.36
Std. Specification:
Table:14.2” x 34.4” (360 x 880mm)
Longitudinal travel (X-axis):26” (660mm)
Cross travel:16.1” (410mm)
Vertical travel:20.1” (510mm)
Spindle nose to table top(D):4.1”-24.2”(105-615mm)
Load capacity:900 lb (409 Kg)
Spindle taper: CAT40
Spindle Speed (r.p.m.):6000 rpm
Transmission of spindle & motor:Belts
Spindle center to column front surface:17.7” (450 mm)
Feed Rate:
Rapid feed rate:X/Y/Z: 150 ipm DC, 320ipm AC
Cutting feed rate:1-120 ipm/DC; 150ipm/AC
Motor:spindle motor/max torque:7.5HP/38NM
Feed motors on XYZ:29in-lbs DC, or AC 1 Kw
Coolant pump:1/4 Hp
Lubrication pump:150W
Power requirement:14 KVA,3 Phase 208-230 voltage
Automatic Tool Changer-No. of tools:16
Max. Tool diameter:3.54” (90 mm)
Max. Tool length:
Max. Tool weight:15.4 lb (7 Kg)
Length X Width X Height (LXWXH):90”x83.1”x90”
Floor Size:90” x 83” x 98.2”
Net Weight:5,500 lbs. (2500 Kgs)
STANDARD ACCESSORIES:
Tools & boxFull guardingShop floor programming/Conversational
Leveling bolts & plateUSB 2.Auto Lubrication / coolant system
RS-232 Interface & USB
Auto lube system
Halogen work light
Air blast,
coolant flush gun
1GB solid state hard drive
note:no vise or tool holders included..i think this machine can be easily modified to run on 220/1 phase power if needed-please verify
|
|
| Ad # 10176 | CNC & Retrofit Knee / Bed Mills w/o ATC |
| 1995 |
Tree |
Journeyman 250 |
Good |
sold |
Photo /
More Info. |
| 3 axis cnc-10 x 38 table ;30 taper spindle: 3 axis cnc
table: 10 x 38"
30 taper
color touch screen
control: siemens PC-2100
ridged head & ram
coolant
|
|
| Ad # 16009 | Vertical Machining Centers (VMC) |
| 1999? |
Atrump |
B5AC |
Good |
sold |
Photo /
More Info. |
| Atrump B5AC 3 Axis CNC Bed Mill VMC w.4th Axis and Centroid CNC: MACHINE SPECIFICATIONS
Table Size 12” x 50”
Spindle Nose to Table 4 5/16” - 23 3/8”
X Axis Travel 33”
Y Axis Travel 18”
Z Axis Travel 19”
Spindle nose taper Cat 40
Spindle Motor 7.5 HP
Tool Changer Capacity 16 Stations
Integrated 4th Axis - Centroid RT 200
RT 200 - 200mm Diameter Face
NOTE: Tooling shown is NOT included in machine
price but can be purchased separately either as
a whole or per piece. Please ask for details |
|
| Ad # 16011 | Vertical Machining Centers (VMC) |
| 90's? |
Remedy/Atrump |
B8AC |
Good |
sold |
Photo /
More Info. |
| 51" x 16" VMC with 20 ATC and Centroid CNC Control: Table: 51' x 16"
51" x 16" VMC with 20 ATC and Centroid CNC Control
this is built and sold by atrump also as a model B8AC
NOTE: Quantity of Tooling available but is NOT
included in machine price. It can be purchased
separately either as a whole or per piece. Please
ask for details
|
|
| Ad # 15084 | CNC Horizontal Boring Mills |
| 1986 |
Toshiba |
BTD-11B |
Good |
sold |
Photo /
More Info. |
| travels: 79.5" x 59" x 55": CNC Toshiba Horizontal Boring Mill #BTD-11B
Control:Fidia # C1
Spindle: Cat 50 taper: 1600 RPM max
3 axis plus rotary indexer controller
table weight capacity: 13,800lbs
table :table 63" x 55"
Std. Mfg specs below-please verify
actual
machine
CAPACITY:
Spindle Diameter :4.33"
Taper In Spindle :#50
Vertical Head Travel, Y-Axis :59.05"
Table Cross Travel, X-Axis :78.74"
Spindle Travel, Z-Axis :24.8"
Saddle Travel: W-Axis :51.2"
Spindle Speeds :5-1600 RPM
http://www.prestigeequipment.com/email-
template/spacer.gif
Built In Rotary Table
55" x 63"
http://www.prestigeequipment.com/email-
template/spacer.gif
Table Indexing
4 x 90 Degrees
http://www.prestigeequipment.com/email-
template/spacer.gif
Table Load Capacity
13,860 LBS
EQUIPPED WITH:
Built-In Rotary Table
Ball Screws And Independent DC Servo
Drives
Way Covers
Hardened Ways
20/15 HP Spindle Drive Motor
440/220/3/60
Manual Pulse Generator
Note: machine has been disassembled
for
transport -ready to load up using local
rigger est
cost to load $ 2500.00
|
|
| Ad # 14567 | Vertical Machining Centers (VMC) |
| 1991 |
Mazak |
VTC-41 |
Good |
sold |
Photo /
More Info. |
| Machine Travels (X/Y/Z) 22" x 16" x 20" : 1991 Mazak VTC-41 machining center
Specs
X: 22 "
Y: 16 "
Z: 20 "
Power: 10 hp
RPM: 7000 rpm
# ATC: 24
Table-W: 16 "
Table-L: 35.4 "
Taper: CT 40
Dimensions: 8' x 8' x 8'
Weight: 9,500 lbs.
Control: MAZATROL EIA
Specifications:
Table Size 16" x 35"
Machine Travels (X/Y/Z) 22" x 16" x 20"
Table Capacity 660 lbs.
Spindle Taper Cat 40
Spindle Speeds 60 - 7000 rpm
Rapid Rate (X/Y/Z) 787" x 787" x 590" ipm
Maximum Feed Rate .04 - 196 ipm
Tool Changer Capacity 24 Stations
Max Tool Length 13.8"
Max Tool weight 17.6"
Spindle Drive 10 hp.
Power Requirement 230V/3Ph/60Hz
Machine Weight 9,500 lbs.
notes: very nice machine,low hrs,has
manuals
rigging/loading fee: $ 1500.00
|
|
| Ad # 13146 | Gantry Type Mills and Routers |
| 1996 |
Jomach |
243 |
Excellent |
sold |
Photo /
More Info. |
| travel: 177" x 106" x 49": JOBS GANTRY TYPE CNC VERTICAL MACHINING CENTER
Model JoMach 243, New 1996,
EQUIPPED WITH:
Jobs Jo'Cam CNC Control, Color Display, Graphics, Conversational
Programming, Multiple Part Program Storage, Self Diagnostics,
40 HP Heavy Duty Geared Spindle with Cat-50 Taper, Automatic Head
Changer, 90 Degree Head, 32 Station Automatic Tool Changer,
Coolant System and Chip Conveyor.
CATALOGUE SPECIFICATIONS:
Working Surface........................................... 77.13" x 255"
Table Load Capacity................................... 36,000 lbs
Longitudinal Travel (X-Axis).......................... 177"
Cross Travel Including ATC Position (Y-Axis).......... 106"
Vertical Travel (Z-Axis).............................. 49"
Distance Between Columns.............................. 80"
Rapid Traverse Rate (X & Y-Axes)...................... 787 IPM
Rapid Traverse Rate (Z-Axis).......................... 360 IPM
Tool Storage Capacity ................................ 32
Spindle Horsepower.................................... 40 HP
Spindle Speeds ....................................... 5 - 4000 RPM
Spindle Taper......................................... #50 CAT
Electrics............................................. 460/3/60
Approximate Machine Dimensions........................ 48'3" x 28'2"
Approximate Machine Height............................ 268"
Approximate Machine Weight............................ 110,000 LBS
CONDITION: Appears to be in Excellent Condition !
|
|
| Ad # 13134 | CNC Horizontal Boring Mills |
| 1975 |
Cincinatti |
25HC-1800NC |
Good |
Sold |
Photo /
More Info. |
| 4"spindle: travels: X=96",Y=60", Z=52": 1975 Cincinatti # 25HC :cnc Horizontal boring mill w tool changer
travels: X=96",Y=60", Z=52"
Rebuilt by King completly in 1996 spent $360,000
The Cincinnati Milacron CIM -Xchanger 25HC-1800NC Hporizontal machining center is a general purpose Machine tool, of three slide axis with rotatary index table and tool changer capability integrated with a fanuc control system.
Machine can automaticaly change tools for milling, drilling, tapping, boring, reaming purposes.
Machine consists of a fix base with column, carrier and table unit. The column is mounted on top of the base unit and moves horizontally toward and away from the table. The carrier mounted on the front of the column moves vertically. The sliding table mounted on the base moves longitudanllyand carries the rotary table.
Specs:
4" spindle nose
travels: x-96", y-60" ,Z=52"travel
50 taper spindle -Cincinnati 50 taper double flange- not cat
Spindle motor: 25HP
spindle speeds: 20-3000 RPM
rotarty table positioner: 4ft x 4ft , 5 deg increments, max load 10,000 to 5" from centerline of table
table size: 108" x 48" overall
control: fanuc 15M
tool changer 30 positions, max tool length 19", 80lbs max...cycle time 8 sec tool to tool...metal to metal 12 sec
RS 232 port
feed rates: X,y,Z=0.2-150IPM
Acuracy: +- 0.0005 when new
no thru spindle coolant
no pit required
floor space: 19.3 x 18.2 x 12.7
under power rerady to Demo!
includes several tool holders approx 40pcs
note: machine can not be moved until replacement arrrives but can be reserved..approx: july 2013 |
|
| Ad # 15009 | Vertical Machining Centers (VMC) |
| 199? |
Okuma |
V4020/Cadet V |
Good |
sold |
Photo /
More Info. |
| 40 x 20 travels: Okuma V4020/Cadet V machining center
control: OSP5020M
travels: 20" x 40"
tool changer 20 station
note: surface rust on machine
but
ran when taken out of service
std factory specs below: please verufy
actual machines
echnical details
Table Size 47" x 20"
Max. Weight of Workpiece 700 LBS
X-Axis 40"
Y-Axis 20"
Z-Axis 20"
Rapid Traverse 591 IPM
Cutting Feed Rate 157 IPM
Number of Tools 20: cat 40
Spindle speed 6,000 RPM
Main Motor 10 HP/7.5 HP
Spindle nose to Table min 7.8"
Spindle nose to Table max 27.8"
Spindle center to Column 20"
Machine dimensions 162" x 135" x 136"
Machine weight 9680 LBS
RS232 port/floppy
|
|
| Ad # 14991 | Vertical Machining Centers (VMC) |
| 1997 |
Boston Digital |
505-HSK |
Good |
sold |
Photo /
More Info. |
| 40" x 12.5" x 17"-5 axis : Bostomatic 505-HSK S/N# 332 sold originally to Ernie Elliot race team: 5 ax... |
|
| Ad # 14980 | CNC & Retrofit Knee / Bed Mills w/o ATC |
| 200? |
Trax |
DPM |
Good |
sold |
Photo /
More Info. |
| cnc/manual: Trak DPM Bed Mill-3 axis
cnc plus manual control
control: AGE 3 w/ graphics
10 x 50 table
cat 40 spindle
air draw bar
3/5 hp spindle
220/3 voltage
rigger fee add:$800.00 to load on flat bed
|
|
| Ad # 8133 | CNC & Retrofit Knee / Bed Mills w/o ATC |
| 2006 |
Acer-Acu-rite |
3VK / Mill Power |
Excellent |
Sold |
Photo /
More Info. |
| Acer/Acu-rite Millpwer -3 axis cnc retrofit Mill: Acu-rite-Mill Power Control or runs manually !
Acer E-Mill Precision Milling Machine
3 Axis or Acu-rite Mill power 3 axis
C5 Ball Screws and Bearings
31"/lb. DC Servo Motor
Electrical Cabinet with Noise Filter, Motor Contractor, All Power Supplies
Control Software:
Abs/inc
Tool Library
Inch/Metric
Polar/Cartesian
Rectangle
Circle
Custom Pockets
Hole Patterns
Repeat, Rotate, Mirror Image, Engraving
Position/Drill
Lines/Diagonals/Arcs
Blends
Explode & much more...
Acer 3VK Knee Mill
Features:
3 HP Super E Baldor Motor
Infinite 60-4500 rpm Speed
HRC 52 Hardened & Ground Table
Turcite B Coated Guide Way
Precision Spindle with ABEC 7 Bearing
Meehanite Casting
Automotive Painting
Milling Head with Tilting Mechanism
Rugged 9 x 42" or 10 x 50" Table Size
1" Diameter Ball Screws with Casted Mounting Brackets
Hardened & Ground X,Y,Z,Table Top and Bottom to HRC 52
Dual Knee, Table, and Saddle Locks(Except 3VS Model)
R-8 Spindle Taper
Class 7 Precision Spindle Bearing
Precision 3-3/8" Diameter Hard Chromed Quill @ HRC 62
Turcite B Lining Saddle Ways to Reduce Metal Wear
Max. Table 500Lbs
Options included: Power draw Bar, Power Knee Feed, Scale on Knee combines with Quill Display for 1 Z reading, vise
|
|
| Ad # 13049 | Vertical Machining Centers (VMC) |
| 1999 |
Johnford |
VMD-1300HD |
Good |
sold |
Photo /
More Info. |
| 52 x 32 travele: 1999 Johnsford VMD-1300HD
52 x 32 travels
table size: 59 x 28"
spindle taper : 50 cat
control : fanuc 18M
toolchanger: 20 stations
run time hrs: 6,000 ?
220/3 votage
weight: 13,500KG |
|
We found 32 matching ads. Now displaying the remaining 32 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 11773 | Universal Mills (Horizontal / Vertical) |
| — |
Rambaudi |
FGR |
Good |
sold |
Photo /
More Info. |
| heavy duty vert/horiz mill table 60 x 12: rambaudi heavy duty mill
table size: 60 x 12-3/4"
travels table 36" x 12-3/4"
step pulley-speed change head
power knee |
|
| Ad # 2280 | Vertical Bed Mills |
| 1977 |
WMW/ Fritz Herkert |
FSS400 V1/2 |
Good |
sold |
Photo /
More Info. |
| Heavy Duty Verty Mill: travels:20" Z, 20" Y, 44" X
50 Taper
Universal head
45-2200RPM
power feeds on all axis
14.5KW motor
16 x 79" table size |
|
| Ad # 12824 | Knee Mills (Bridgeport Type) |
| 1985 |
Comet |
2V |
Good |
sold |
Photo /
More Info. |
| 9 x 42 table: Comet Knee Mill
9 x 42 table
3HP
vari-speed head
R-8 spindle
one shot lube
ways look good
head tilt L-R nut needs replaced-but perfectly
usable if dont want to tilt head L-R |
|
| Ad # 14825 | Knee Mills (Bridgeport Type) |
| ? |
Alliant |
942-2V |
Good |
Sold |
Photo /
More Info. |
| 9 x 42" table: Alliant manual Knee
mill# 942-2V
table: 9" x 42"
vari-speed head
kurt vise
servo power feed
2 axis dro
220/3 voltage
wired
misc collets and
drill chuck shown in
picture included
nice machine ready
to go! |
|
| Ad # 2125 | Knee Mills (Bridgeport Type) |
| 1995 |
Seiki-XL |
5V -XL |
Very Good |
sold |
Photo /
More Info. |
| Extra heavy duty Knee Mill: 5 HP variable speed head
12" x 50" table
2 Axis digital readout
auto-lube system
power feeds on all axis
30 Taper spindle
power draw bar |
|
| Ad # 15617 | Knee Mills (Bridgeport Type) |
| — |
Bridgeport |
series 1 |
Good |
sold |
Photo /
More Info. |
| 9 x 42: bridgeport knee mill series 1
vari speed head
9 x 42" table
2 hp motor -j head
vise and collet set
R8-collet spindle
work light |
|
| Ad # 10714 | Knee Mills (Bridgeport Type) |
| ? |
Sharp |
9 x 42 |
Good |
Sold |
Photo /
More Info. |
| 9 x 42 table: 9 x 42 table
DRO-Anilam wizard 211-2 axis
servo power feed on x axis
11pc collet set
2 hp |
|
| Ad # 8835 | Planer Mills |
| — |
Cincinnati |
Plano Mill |
Good |
Sold |
Photo /
More Info. |
| 36in x 16in table: 36 x 16" table size
48" between columns
includes bridgeport milling head
upgraded variable speed drive |
|
| Ad # 6601 | Knee Mills (Bridgeport Type) |
| 1980 |
Jet |
JVM830F |
Good |
Sold |
Photo /
More Info. |
| Home Shop type Knee Mill -single phase: 2 HP
R-8 spindle
8" x 31" table
step pulley speed change head
220/1 voltage |
|
| Ad # 1955 | Horizontal Mills |
| ? |
Nickols |
U36 |
Fair |
Sold |
Photo /
More Info. |
| Small Manual horiz Mill: Manual head & table movement. |
|
| Ad # 12493 | Knee Mills (Bridgeport Type) |
| — |
Cincinnati |
— |
Good |
sold |
Photo /
More Info. |
| 10" x 42": Cincinnati Knee Mill
Anilam Wizard 350 DRO
10" x 42" Table
Powerfeed X
Box way machine
140-3800 RPM
Does not use R8 Collets! Nor Cat 40 |
|
| Ad # 14131 | Engraving, Copying & Pantograph Equip. |
| ? |
Gorton |
P2-3 |
Good |
sold |
Photo /
More Info. |
| 3-D type: Gorton pantagraph copy mill # p2-3
Gorton 3D Pantograph Engraving Machine Model
P2-3, S/N# 33948,
9 Speeds 1,300 to 13,000 rpm,
9" x 34" Table,
Overall size 5' 9" x 50"W x 7'T, 1/2hp
230/460/3ph -verify?
machine runs and has 3-D bar-just needs
cleaned up... |
|
| Ad # 8514 | Vertical Boring Mills |
| — |
Moore |
PG/ST493102 |
Good |
SOLD |
Photo /
More Info. |
| 10 x 16 in table: step pulley head speed control
10 x 16 table
lots of tooling included , QC type
1/2 HP |
|
| Ad # 14647 | Knee Mills (Bridgeport Type) |
| 1978 |
Alliant |
9 x 42 |
Excellent |
sold |
Photo /
More Info. |
| 9 x 42" mill: reconditioned Alliant mill
Bridgeport Mill Copy, 9x42 table 2 HP 220-
3PH
variable speed, new D.R.O. Power knee power
feed R-
8
collets 6" swivel vise. Power draw bar.
Chrome bed,
under power, new upper bearing. |
|
| Ad # 12320 | Knee Mills (Bridgeport Type) |
| 1985 |
Enco |
9 x 42 |
Good |
sold |
Photo /
More Info. |
| 9 x 42 table: Enco knee mill
9 x 42 " table
step pulley head
vise
some collets
2HP |
|
| Ad # 579 | Planer Mills |
| — |
Rockford |
20" |
Good |
sold |
No Photo /
More Info. |
| Horizontal Planer-Hydraulic: 20" , hydraulic machine |
|
| Ad # 569 | Planer Mills |
| — |
Niles |
2' x 8' Planer |
Fair |
Sold |
No Photo /
More Info. |
| Niles Metal Planer: 2' x 8' |
|
| Ad # 587 | Vertical Bed Mills |
| late80's |
Sharp-First |
RB 1 |
Good |
sold |
Photo /
More Info. |
| Bed Mill 9 x 42" table: 2 Hp Motor
Variable speed
23 x 15 travels ;
9x 42 table;
2-axis readout
Great for milling & drilling |
|
| Ad # 10266 | Knee Mills (Bridgeport Type) |
| 80's? |
Bridgeport |
Series 2 |
Good |
sold |
Photo /
More Info. |
| series 2 bridgeport:11 x 58 table: table: 11 x 58"
missing quill handle and knee lift handles
bridgeport power feed on longitudinal
SPECIFICATIONS:std specs please verify below
WORKING SURFACE OF TABLE ................. 11" X
58"
RANGE:
- LONGITUDINAL ........................... 30"
- CROSS .................................. 15"
VERTICAL (KNEE) .......................... 16"
RAM TRAVEL ............................... 16"
MAXIMUM THROAT DISTANCE .................. 26-5/8"
MINIMUM THROAT DISTANCE .................. 10-5/8"
MAXIMUM TABLE LOAD CAPACITY .............. 1,500
LBS.
SPINDLE SPEEDS, TWO RANGES ............... 50 TO
450 RPM
INFINITELY VARIABLE ...................... 450 TO
3500 RPM
QUILL TRAVEL ............................. 5"
QUILL POWER FEED RANGE ................... .6 TO
2.5 IPM
FEEDS:
- LONGITUDINAL ........................... 3/8 TO
24 IPM
- CROSS .................................. 3/16 TO
12 IPM
RAPID TRAVERSE RATE:
- LONGITUDINAL AND CROSS ................. 24 IPM
- VERTICAL (KNEE) ........................ 12 IPM
TAPER IN SPINDLE ......................... R-8
HEAD TILTS:
- LEFT TO RIGHT .......................... 90 DEG.
- FRONT TO BACK .......................... 30 DEG.
RAM SWIVELS .............................. 360
DEG.
APPROXIMATE WEIGHT ....................... 5,500
LBS.
very little wear on the ways
no knee crank handle or quill handle
Std. power feed unit may need a little TLC..or
replaced with a modern unit |
|
| Ad # 11174 | Horizontal Mills |
| — |
Barker |
PM |
Good |
sold |
Photo /
More Info. |
| —: 12" x 4" table
step pully speed change
includes 2 hydra check cylinders -not connected for
speed control
coolant
cycle start switch box
3/4" HP |
|
| Ad # 11172 | Horizontal Mills |
| — |
Nickols |
7R |
Good |
sold |
Photo /
More Info. |
| —: Rise & fall horizontal mill
|
|
| Ad # 11173 | Horizontal Mills |
| — |
Burke |
126A |
Good |
sold |
Photo /
More Info. |
| 20" x 4" table: Burke
126A Horizontal mill
20" x 4" table
step pully speed control |
|
| Ad # 11163 | Knee Mills (Bridgeport Type) |
| 1999 |
Acer |
3VK |
Very Good |
Sold |
Photo /
More Info. |
| Acer 10 x 50 knee mill: 1999 Acer 3VK 10" x 50" table
2 axis DRO-Mits
variable speed head
R-8 spindle
includes full collet set and rack
3HP
Very Nice clean Quality Mill
Ways are almost perfect!! |
|
| Ad # 188 | Universal Mills (Horizontal / Vertical) |
| — |
Ranbaudi |
# FCR-TSP |
Good |
Sold |
Photo /
More Info. |
| Horiz Mill w/ vert attachment: Vertical; head NST# 40; Large Dia" quill; 16 speeds 60-3,000;Head rotation ... |
|
| Ad # 7520 | Knee Mills (Bridgeport Type) |
| 91?? |
Bridgeport |
Series 1 |
Good |
Sold |
Photo /
More Info. |
| 9 x 42" table Series 1 ;variable speed : variable speed head
Series 1
2 hp
bridgeport power feed on X
R-8 spindle
manual lube
|
|
| Ad # 15732 | Knee Mills (Bridgeport Type) |
| — |
Lagun |
FTV-2 |
Good |
sold |
Photo /
More Info. |
| 10 x 50 table: Lagun FTV2 knee mill
includes 2 axis dro,work light,manual lube and vise
Lagun FTV2 knee mill std specs below-please verify actual machines..
pecificationDescription
Table Dimensions50" x 10"
Travels:
Longitudinal33"
Cross16"
Knee16"
Quill5"
Ram22-3/16"
Spindle Speeds (Variable)55 - 4,250 RPM
Spindle TaperR-8
Spindle Quill Feeds0.006" - 0.003" - 0.0015"
Dimensions:70" x 65" x 85"
Approx. Weight2,850 lbs
|
|
| Ad # 16008 | Knee Mills (Bridgeport Type) |
| — |
Alliant |
48 x 9 |
Good |
sold |
Photo /
More Info. |
| 48" x 9" Table: Variable Speed Spindle
Mitutoya Linear Scale Counter DRO's in "X" and
"Y" |
|
| Ad # 14555 | Knee Mills (Bridgeport Type) |
| — |
Van Norman |
#28 |
Good |
sold |
Photo /
More Info. |
| heavy duty: Van Norman manual knee mill #28
swivel head
50 taper spindle
3 axis dro
several tool holders 6 or so
power knee
speeds: 40-1600rpm
note: loading/rigging fee $800.00
nice machine, runs well,little dirty |
|
| Ad # 719 | Horizontal Mills |
| 50's |
Cincinatti |
# 3 |
Good |
sold |
Photo /
More Info. |
| Large Horizontal Mill : 50 taper; 15" x 62" table size |
|
| Ad # 4399 | Knee Mills (Bridgeport Type) |
| 1992 |
Supermax |
YC-1-VA-T |
Good |
Sold |
Photo /
More Info. |
| Quality Knee Mill 9" x 42 table: 9" x 42" table
2-axis acu-rite readout
R-8 spindle
variable speed head 60-4200rpm,runs quiet
3HP |
|
| Ad # 13051 | Universal Mills (Horizontal / Vertical) |
| 2011 |
IH |
manual mill |
— |
sold |
Photo /
More Info. |
| —: Industrial Hobbies milling machine. All info about machine is
available on IH website. This is a manual mill not their CNC
version. Hardly used, looking to move and don't want to haul
a machine around. |
|
| Ad # 7094 | Knee Mills (Bridgeport Type) |
| 80's |
J & L |
HY-1 |
Good |
Sold |
Photo /
More Info. |
| Manual knee mill 9" x 42" w/ DRO: VS Head Type
2-axis DRO
9" x 42" Table
Quill scale DRO-Mitz.
Made in Tiawan
3 HP |
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 1856 | Automatic Bar Machines |
| — |
Hardinge |
CHC |
Very Good |
SOLD |
No Photo /
More Info. |
| CNC Chucker: 1-1/2" spindle bore w/1" air pwr bar feed
16C collet or 3-jaw air chuck
GN control can be retrofitted to centroid
8 position turret
Tooling included
bar feed included 1"
Travel y=6", Z=10" , recommend 4" part length Max.
|
|
| Ad # 115 | Automatic Bar Machines |
| 1979 |
Hardinge |
AHC Auto Chucker |
Good |
Sold |
Photo /
More Info. |
| AUTOMATIC SREW MACHINE W/ THREADING : THREADING ATTACHMENT |
|
We found 11 matching ads. Now displaying the remaining 11 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 9023 | Radial Drill Press |
| 78? |
Fosdick |
4ft sensitive |
Very Good |
Sold |
Photo /
More Info. |
| 4ft arm -12in column-3hp: LENGTH x COLUMN DIAMETER ..... 4' X 12"
AREA OF BASE (T-SLOTTED) ......... 53" X 30"
AREA OF TILT TABLE (T-SLOTTED) ... 42" X 24" SPINDLE SPEEDS ............. 60 TO 1200 RPM
SPINDLE FEEDS .................... (4) .002/.004/.007/.010 IPR
SPINDLE STROKE ................... 10" SPINDLE DIAMETER ................. 2-1/4"
SPINDLE TAPER .................... #4 MT
SPINDLE TO COLUMN ................ 48´´ MAX. / 9" MIN.SPINDLE TO TILT TABLE ............ 23-1/2" MAX.SPINDLE TO BASE .................. 45" MAX. / 35" MIN.BASE HEIGHT ...................... 6-1/4"
POWER TABLE ELEVATION ............ YES
TAPPING .......................... ?
SPINDLE MOTOR .................... 3 HP
|
|
| Ad # 4237 | Multi Spindle Drill Press |
| — |
— |
— |
Very Good |
Sold |
Photo /
More Info. |
| heavy duty 12 spindle: 12 spindle
coolant
controls
20" x 20" table
10HP motor
holders included |
|
| Ad # 16051 | Radial Drill Press |
| 1981 |
Ikeda |
RMS-9 |
Good |
sold |
Photo /
More Info. |
| 9" column x 3ft arm: 1981 Ikeda Rms-9 radial drill unit with 9" column 3ft arm. Travel Box tab... |
|
| Ad # 15601 | Multi Spindle Drill Press |
| 1967? |
Powermatic |
1200 |
Good |
sold |
Photo /
More Info. |
| 7/8" capacity: 4 head powermatic drill press
1.5HP each
speed: 200-2000rpm
20" throat depth
step pulley head for speed changett
7/8 steel capacity
Electric Motor - 208-230/480 VAC
|
|
| Ad # 13476 | Single Spindle Drill Press |
| 1985 ? |
Solberga |
SE1735 |
Good |
sold |
Photo /
More Info. |
| 1-1/2" capacity or 34mm-gear head type: Solberg drill press
# SE 1735
1-1/2" capacity mild steel
3MT spindle
main motor 2.4HP
Power downfeed
T-slot table
std specs below-please verify
•Adjustable drill head heights on all models (n/a for SE2040)
•Drill heads & table arms can swivel 360 degrees around the column (n/a for SE2040)
•Helical drive gears with fiber to steel mesh provide a virtually maintenance free, quiet & efficient operation
•Spindles and columns are made of top quality Swedish steel
•Spindles are designed recessed into the quill housing, providing superb rigidity
•Power feed units are equipped with an automatic feed overload
•Each machine is equipped with an electric thermal overload switch, no-volt-release, and emergency stop
Willis-Solberga” geared head drill presses have been made by the Swedish based company “Solberga” for more than 100 years. “Willis Machinery & Tools CO.” has been selling these superior pedestal drill presses since 1963. Being the sole importer of “Solberga” geared head drill presses in The United States, “Willis Machinery” is able to offer one of the world’s greatest drill presses at an exceptional price, creating a value for the customer that cannot be matched. “Willis-Solberga” drills are also sold with a number of different options. Flange quills are available in order to mount multiple spindle heads. “Solberga” drill presses for sale can either come as manual or power-feed machines. The drills with an electromagnetic (ELM) package provide an electronic push button, for power feed engagement and auto reversing for tapping. Tapping is made possible by the option of automatic reversing or even a foot pedal for convenient operation. Flood coolant is also a popular option for the “Willis-Solberga” drills.
2-speed, forward/reverse switch, providing 8 spindle speeds.
8-speed gear box.
All of the “Willis-Solberga” drilling machines With the highest of quality parts, and options available at competitive prices, “Willis-Solberga” pedestal drill presses allow customers in maintenance, military, school, fabricating, tool & die, aerospace, and manufacturing operations to fulfill their needs with great ease and efficiency. |
|
| Ad # 12469 | Radial Drill Press |
| 70's ? |
Fosdick |
3ft sensitive |
Good |
sold |
Photo /
More Info. |
| 3ft arm x 12" dia column: Fosdick radial drill
3 ft sensitive
36" arm travel-throat
12" dia column
18" drill travell-depth stroke
drill & tapping capability
6HP
power table lifting type, swivels
28" under arm to table work height max
24 x 36" table
4MT spindle
feed 0.004-0.20
coolant
60-1200 RPM |
|
| Ad # 9461 | Multi Spindle Drill Press |
| 2001 |
Controlled Automation |
BFC-530 |
Good |
sold |
Photo /
More Info. |
| Used BeamLine for sale: 2001 Controlled Automation BFC-530 Beamline Punch (saw not included)
·Punching capacity: 1 1/16” dia. holes thru 1” mild steel
·In feed roller bed length: 65’
·In feed transfers width: 14’-6”
·Out feed roller bed length: 65’
·Out feed right side transfers width: 11’-6”
·Out feed left side transfers width: 21’-2”
·In feed and out feed roller bed widths 40”
|
|
| Ad # 13995 | Radial Drill Press |
| 1950's? |
Cincinnati Bickford |
Super Service |
Good |
sold |
Photo /
More Info. |
| 13" dia columm x 4ft: Cincinnati Bickford Super Service Radial Arm Drill Press-refurbished recent... |
|
| Ad # 13275 | Multi Spindle Drill Press |
| 80's |
custom |
— |
Good |
sold |
Photo /
More Info. |
| multi spindle up to 36 holes at once: custom multi hole drilling unit
can drill up to 36 holes at once
2" drill spacing
68" overal bed length
uses a 6" 3 jaw chuck to hold part
coolant
chuck strokes in z axis approx 2" to do 72 holes in same plane
table has a 6" upstroke into drills
clamp system set up to do 1-2" dia pipe
this was used to drill holes in pipe at mutiple planes ..it indexes and rotates pipe
As far as I remember it is under power. I did say that the last time I turned it on it would not sequence through the drill/rotate cycle. There is a tenor drum timer (rotating drum with push pins that actuate switches) that is not indexing. I suspect the timer motor is defective. If I were going to use it, I would update it with a cheap (few hundred dollar) PLC.
We would ask $4,995 for it and unhook it, move it and load it for another $500.
There is a hydraulic motor, main drive motor and coolant motor. All of them are 575 3 phase.
Swapping them to 480 would require a motor change.
As far as I can tell, you can use any drill size that has a #1 Morse taper.
I found #1 Morse drills from 3/16 to 15/32.
The tool holders that we used go by the name of #1 Morse Taper Split Sleeve Drill and Reamer Drivers’. The split sleeve allows you to use up to a 3/8” straight shank.
I cannot see the motor data plate for HP, RPM, Frame etc. t looks like 15-20 HP.
There are 36 drilling positions spaced 2” apart. The chuck that holds the piece you are drilling not only rotates but goes in and out. This means the hole centers can be 1” or 2” apart longitudinally.
Sometimes we would skip drilling positions to increase the center distance between holes.
I will have to ask someone what the chuck degree stops are when rotating radially.
Remember, we built this gang drill for a very specific purpose.
|
|
| Ad # 15117 | Single Spindle Drill Press |
| — |
Dayton |
13" |
Good |
sold |
Photo /
More Info. |
| 13" drill press: Dayton 13" drill press |
|
| Ad # 5664 | Multi Spindle Drill Press |
| — |
Allen |
2 Head |
Good |
Sold |
Photo /
More Info. |
| 2 -Headed multi spindle drill heads unit: 2 HP heads
800-2400RPM step pulley speed change
14" throat
24" spacing between main spindle heads
21 x 50" table
coolant
Auto down feed cycle & adj. feeds for tapping
Wiring prints included
up tp 9 drills can be adapted to each head type: Rockwell # 700 multi drill heads max spacing on head is 7" Dia.adjustable |
|
We found 49 matching ads. Now displaying the remaining 49 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 14920 | Cold Saws & Power Hack Saws |
| 2015 |
Pedrazzoli |
Super Brown 350AP |
Good |
sold |
Photo /
More Info. |
| Auto feed 14" ferrous cutting: Pedrazzoli Super Brown 350AP ferrous cutting
fully automatic shuttle feed cold saw
std mfg specs below:
PEDRAZZOLI SUPER BROWN 350 AP 14" AUTOMATIC
CIRCULAR COLD SAW 350MM MACHINE
SUPER BROWN 350/45 AP
Mechanism for the rotation of head block
for angled cuts up to 45º left with locking
lever – Pneumatic vice with removable anti-burr
– Pneumatic cylinder for head movement, with
brake for speed adjustment – transmission by
means of a double expandable pulley for speeds
variable between 15 thru 90 RPM – Head tilting
on adjustable lubrication bushings – 600mm step
feeder controlled by a pneumatic cylinder –
Repeatability of up to 9 steps to reach a total
stroke of 5400 mm – Maximum opening of feeder
collet = 160mm – Programmable piece counter –
Minimum scrap on final cut = 160mm – Feeder
speed adjustment valve – Amp meter – Reverser –
Emergency push button with key and lockable
switch on control panel – Blade lubrication –
Cooling system with electric pump – Coolant
liquid vat with extractable pump for vat
cleaning – Complete protection guard with rapid
blade change system – Circular blade diameter
350mm – Blade cleaning roller
Key elements:
Circular saw with manual, semiautomatic and
automatic operation.
Cutting head rotating together with
circular support plate.
Standard equipped with speed variation and
vice pressure adjustment device.
Blade reverser for solid bar or profiles
cutting.
For all type of metals.
Cutting Specifications
Straight Cut or 45º Left Cut:ROUND 4.5”
SQUARE 4.3”
SQUARE 3.7”45º Left
RECT. 6.29” x 7.4”
RECT. 4.7” x 3.15” at 45º Left
Machine std.Specifications
Motor kW:1.5
RPM:15 thru 90
Maximum Vice Capacity:6.69”
Blade Diameter:350mm/14"max
Machine Weight:975 lbs.
Note: less than 10 hrs on it! sells for over 17K new
|
|
| Ad # 14919 | Cold Saws & Power Hack Saws |
| 2006 |
KMT |
CT350SA |
Good |
sold |
Photo /
More Info. |
| 14" blade-for non ferrous mtl: KMT CT350SA semi Automatic Circular saw-for non ferrous mtl
The CT 350 Series machines are high speed
circular saws for aluminum extrusions and other
non-ferrous materials. These machines feature
swiveling capability for mitering and
swiveling/tilting capability for compound
mitering.
The machine operates Semi-automatically with
air over hydraulic system providing optimum
sawing rates with minimum effort by the
operator.
Std> Mfg.Specifications:
HP:2.5
Electrical: 240/3
Max Blade (in):14” – 350mm
Spindle RPM:1800 & 3600
Max Vise Opening:8”
Weight:750
Coolant Capacity:2 gallons
Work Height:35.25
Capacity Chart:max
at90deg:4.75 rounds,4.5" square,7.5" x 3.5"
rec
at 45DegL:4.5" round,4" square,5.9 x 2.75
rectangle
Standard Equipment Includes:
Heavy Duty Drive, TEFC Motor
24 Volt Controls
Disconnect Switch
Hydraulic oil
Variable Vise Clamping Pressure
Blade speed indicator
Work height and depth controls
Heavy Duty Drive
Preset stops, 0,15,30,45 degrees
Removable extruded special jaws
Length stop assembly
Carbide tipped Blade
Built it spray mist coolant
Operators Tools
All Safety Guards
NOTE: This Machine will NOT cut ANY steel.
Don’t even think about it. |
|
| Ad # 15671 | Cold Saws & Power Hack Saws |
| 2012? |
Scotchman |
CPO 350 PKPDVS |
Excellent |
Sold |
Photo /
More Info. |
| 4.5" tube ,5.5" x 4" rectangle: Scotchman Cold saw
#CPO350VSPKPD
like new,used less
than a full day!
Power down feed
air vise
vari speed 11-
177 RPM
coolantsystem
14" blade
capacity
5HP motor
comes with: 150
tooth blade,spare
blade
Saw tool
kit,manuals
std mfg specs
below
The Scotchman
CPO 350 PKPD Semi-
Automatic Manual Cold
Saw with a powered
material clamp
provides clean,
straight, burr-free
cuts; easy miter
cuts; and safe
operation without
sparks or heat. Miter
cuts and slotting
operations are no
problem with a head
that will rotate up
to 90 degrees left or
right. Miter locking
pins at 45 degrees
left, 45 degrees
right and 90 degrees
provide positive,
fast angle selection.
Burr-free cuts are
easily achieved, with
the double self-
centering vise.
These rugged
machines are made to
last with a hardened
and ground bronze
worm gear and a
hardened and ground
wheel gear will
provide years of
trouble-free service.
Variable Speed saws
allow the user a wide
range of cutting
speeds maximize speed
selection for
different cutting
applications. A wide
range of applications
from small shops to
large manufacturing
facilities can depend
on this saw for years
to come.
•Type:
stationary
•Blade Size
(inches): 14 (350mm)
•Mitering Range:
45 degrees, left and
right
•Round Solid
Capacity 90 Deg
(inches): 2
•Round Solid
Capacity 45 Deg
(inches): 1-3/4
•Round Tube
Capacity 90 Deg
(inches): 4-1/2
•Round Tube
Capacity 45 Deg
(inches): 4
•Square Tube
Capacity 90 Deg
(inches): 4
•Square Tube
Capacity 45 Deg
(inches): 4
•Rectangle Tube
Capacity 90 Deg
(inches): 4 x 5
•Rectangle Tube
Capacity 45 Deg
(inches): 4 x 4
•Weight
(pounds): 675
•Dimensions
(LxWxH): 22 x 44 x 57
Note: machine
has less than 50 cuts
on it,like new!
|
|
| Ad # 6965 | Tilt Frame Vertical Band Saw |
| 1989?? |
Do-All |
TF-1421H |
Good |
Sold |
Photo /
More Info. |
| 14in x 21in Rectangle cap:Tilt frame mitre cutting: 14" Throat
14depth x 22Height
Tilt frame-mitre cutting
Hydraulic tilt & speed control variable
36" x 26" table
Hyd. vise W/ pressure regulator control
171" blade length x 1" wide
flood coolant
work light
5 HP hyd. drive unit
No conveyor included
|
|
| Ad # 11732 | Plate Saws |
| — |
Trennjaeger |
UNI 9760/15 |
Fair |
sold |
Photo /
More Info. |
| Trennjaeger: Trennjaeger beam saw
20" dia blades
spare blades
includes conveyors
includes blade sharpner machine |
|
| Ad # 12913 | Horizontal Band Saws |
| 1984? |
Kysor/Johnson/Dake |
JW |
Good |
sold |
Photo /
More Info. |
| 10" round or 18" flat capacity: Kysor/Johnson/Dake model JW manual horizontal band saw
110/1 single phase-great for home shop
10" round cap
18" flats cap
base on casters
coolant pump
3/4" x 137"" blade
Hyd. feed blade down force w/ adj weight
3/4 HP main motor
mitre vise jaws to 45deg
blade speed: 35,90,130,190FPM step pulley change
on roll around casters
Note:this is a great heavy duty saw cuts straight!
includes manual |
|
| Ad # 13645 | Fully Automatic Horizontal Band Saw |
| 70's ? |
Do-All |
C-58/68 |
Fair |
sold |
Photo /
More Info. |
| 13" rounds-auto shuttle feed: Do All Fully Automatic Horizontal band saw w/ shuttle feed
Capacity: 12"rounds ;12" x 12" flats
vari blade speed 60-350FPM
Hyd. blade tensioner
16" dia band wheels
vise opening: 11" wide x 6.25 high-hydraulic actuated--auto or manual control-swivel to 45 degress-mitre: max: 6.5" wide x 7.5" high
auto stock index max: 12" rounds up to 4,000lbs infinate variable
coolant 15 galtankw/ chip drawer
1" blade width
coolant system
Auto shuttle feed system-triple stoke settings 0-24", 24-48", 36-72"
Note: saw was only used recently as a manual saw, needs some work to convert to back to fully auto shuttle feed...but can be used a a manual saw |
|
| Ad # 13641 | Cold Saws & Power Hack Saws |
| 2010 |
Pat Mooney |
PMI-20 |
Excellent |
sold |
Photo /
More Info. |
| non-ferrous-up cut design--20" dia blade: high performance Alum saw from Pat Mooney Inc with a Tiger Stop measuring s... |
|
| Ad # 14818 | Fully Automatic Horizontal Band Saw |
| 2014 |
KMT |
H310A |
Excellent |
sold |
Photo /
More Info. |
| mitre cutting-fully automatic feed: KMT H310A specs below
Capacity:10" round
blade speed: 60-360 FPM variable
blade width: 1",9'1" long
carbide guiodes
feed stroke 20" max length unlimited shuttle
feed
accuracy +- 0.008"
blade motor: 2HP
coolant tank:10gal
weight:1700lbs
capacity at90deg 10" at 45deg 8",at 60deg 5"
note:full 1 year parts warranty included this
machines has approx: 5 months of use on it |
|
| Ad # 2151 | Cold Saws & Power Hack Saws |
| ? |
Modern |
2LD Modified to 3LD |
Good |
Sold |
No Photo /
More Info. |
| 3" Capacity Cut to Length Production Lathe: 22 Ft. bar feed
3" tube dia capacity
High speed production cut to length machine!
AB PLC controled
Loads of Tooling! |
|
| Ad # 15622 | Cold Saws & Power Hack Saws |
| 2007? |
Scotchman/Bewo |
CPO 350LT |
Good |
sold |
Photo /
More Info. |
| 14" blade: Scotchman/Bewo #CPO 350 manual ferrous cutting cold saw
note"includes 8ft measuring quick lock table and movable measuring stop
2 speed model
The Scotchman CPO 350 Manual Cold Saw provides clean, straight, burr-free cuts; easy miter cuts; and safe operation without sparks or heat. Miter cuts and slotting operations are no problem with a head will rotate up to 90 degrees left or right. Miter locking pins at 45 degrees left, 45 degrees right and 90 degrees provide positive, fast angle selection. Burr-free cuts are easily achieved, with the double self-centering vise.
These rugged machines are made to last with a hardened and ground bronze worm gear and a hardened and ground wheel gear will provide years of trouble-free service. Low Turn (LT) speed saws are designed to be used with thick wall or solid materials. High Turn (HT) speed saws are designed to be used with thin wall or non-ferrous materials. Single Speed (SS) saws are used when 220 volt, 1 phase power is the only available power option. Variable Speed saws allow the user a wide range of cutting speeds maximize speed selection for different cutting applications.
Type: stationary
•Blade Size (inches): 14 (350mm)
•Mitering Range: 90 degrees left, 45 degrees right
•Round Solid Capacity 90 Deg (inches): 2
•Round Solid Capacity 45 Deg (inches): 1-3/4
•Round Tube Capacity 90 Deg (inches): 4-1/2
•Round Tube Capacity 45 Deg (inches): 4
•Square Tube Capacity 90 Deg (inches): 4
•Square Tube Capacity 45 Deg (inches): 4
•Rectangle Tube Capacity 90 Deg (inches): 4 x 5
•Rectangle Tube Capacity 45 Deg (inches): 4 x 4
•Weight (pounds): 675
•Dimensions (LxWxH): 22 x 44 x 57 |
|
| Ad # 2124 | Horizontal Band Saws |
| 1989 |
Do-All |
C-916M |
Good |
sold |
Photo /
More Info. |
| 10" Manual Horizontal band saw: 10" round capacity
9 x 16" rectangle capacity
coolant
1" blade width
2HP
mitre vise |
|
| Ad # 7931 | Vertical Band Saws |
| 80's |
Grob |
4V-24 |
Good |
Sold |
Photo /
More Info. |
| 24" Vertical saw with welder: 24" throat
welder
carbide guides
work light
has table feed but disconected, can be fixed
3HP 230/460 Volt motor(totally enclosed fan cooled ball bearing double shaft motor)
Infinitely variable speed 40-5000 FPM
Speed indicator
Balanced cast aluminum pulleys, ball bearing mounted, oil resistant rubber facing
Heavy cast iron table-Tilt 45 degrees down right, Tilt 5 degrees down left
3/8-1/2 Single piece hard aluminum-bronze saw guides -has carbide option
recently replaced rubber tires-band wheels
The most powerful metal cutting band saws in the class
Heavy duty manufactured transmission with all cold rolled gears and splines for unequalled strength
Infinitely variable speed range for complete control of your sawing needs
Completely manufactured in USA for ultimate value in metal cutting band saws
Specifications: 4V-24
Throat depth 24"
Work height 12"
Saw blades 1/8"-1" wide 179" max
Net weight lbs 1670
|
|
| Ad # 16044 | Horizontal Band Saws |
| 1998 |
Ellis |
1600 |
Fair |
sold |
Photo /
More Info. |
| 10" rounds mitre cutting: Ellis 1600 band saw
Built in protractor for fast and accurate selection of angles
Stock remains in one position for all cuts
Head moves left or right for angle cuts
Quick conversion from horizontal to vertical saw (optional table needed for vertical sawing)
Capacity to cut 10 In. round at 90
10 In. wheels-standard
Heavy steel, welded & machined for accuracy & durability
10 Ft. x 1 In. x 0.035 In. blade size
Quick adjusting vise
Amperage (A)
23
Application
Metal cutting
Assembled Weight (lbs)
481
Band Saw Frame Material
Steel
Band Saw Type
Portable
Blade Guide Type
Bearings
CSA Certified
Yes
Color / Finish
Green
Cord Length (ft)
6
Country of Origin
USA
Cutting Capacity - Depth of Throat (in)
11
Cutting Capacity Height (in)
11
Dust Blower
No
Dust Port
No
Dust Port Outside Diameter (in)
0
ETL Listed
No
Fence Included
No
Horsepower (hp)
1
Internal Supplier Part #
1600
Maximum Blade Length (In) 120
Maximum Blade Width (In) 1
Maximum Feet Per Minute 250
Maximum RPM 3450
Minimum Blade Width (in) 1
Minimum Feet Per Minute 70
Single Phase
16 In. Vertical Band Saw
Saw Wheel Material Aluminum
Speeds 3
Stand Included
Yes
Table Height From Floor (In)
47
Table Length (in)
59
Table Material
Steel
Table Tilt Left (Deg)
45
Table Tilt Right (Deg)
45
Table Width (in)
24
Thrust Bearing Contact Point
Edge
UL Listed
Yes
Voltage 110/220 Volts
Wheel Diameter (in) 8
|
|
| Ad # 10715 | Horizontal Band Saws |
| — |
Dake -Johnson |
J10 |
Good |
sold |
Photo /
More Info. |
| 10" rounds / 18" flats-manual saw : 10" rounds
18" flats
3/4" blade
speeds-50, 90, 160, 270, fpm
1 hp
variable downfeed control..
coolant-3 gallons
mitre vise jaws swivel
|
|
| Ad # 14793 | Pipe, Tube & Bar Cut Off (Production) |
| — |
Watterberry Farrel |
#2:24" |
Good |
sold |
Photo /
More Info. |
| Waterbury Farrel#2 slitting line:24": 24” Waterberry slitting line
Arbor size is 3.250, good for light
gauge.
This is a driven head with driven
exit pinch
rollers
Includes hydraulic scrap winder (800
Lb
capacity)
with traverse arm, full set of
slitter knives
and
tooling (see attached).
4,000 Lbs 24” uncoiler with air
brake
we have a 24” re-coiler with over-
arm
separator
8,000 Lb capacity with hydrualic
push
off, 16”
drum. This was not part of the line
but can be
used with this line. Motor is 35 hp
DC
tooling for 24" waterbury Farrel
slitter
24" #2 Waterbury Farrel Slitter
3.250" Arbors
Louis Allis 5 HP DC Gear Motor solid
state Drive
and Control
Driven Exit Pinch rollers for de-
burring
Knives
42 Pcs. .120 x 6.445 O.D.
41 Pcs. .500 x 6.500 O.D.
Full set of rubber stripper rings
Spacers 3.250" I.D. x 4.875" O.D.
.750" x .312"
Keyway
40 Pcs .032
30 Pcs .062
31 Pcs .125
20 Pcs .250
17 Pcs .500
12 Pcs .750
10 Pcs 1.00"
8 Pcs 2.00"
2 Pcs 3"
4 Pcs 6"
updated info below: 24" Waterbury slitter
-Driven head-Control Panel- 3.250" arbor-4,000
Lb un-coiler- 6,000 Lb re-coiler with
hydraulic
push off. 500 Lb capacity Scrap winder-
overarm
separator. Head is driven by Louis Allis 5hp
gear motor -solid state drive and control with
driven exit pinch rollers for de-burring. Line
includes full set of tooling, slitter knives
and rubber stripper rings. Knives- 42 Pcs .120
x 6.445" O.D. 41 pcs .500 x 6.500" O.D.
Spacers- 3.250" I.D. x 4.875" O.D. .750 x .312
Keyway 40 Pcs .032 30 Pcs .062 31 Pcs .125 17
Pcs .500 12 Pcs .750 10 Pcs 1.00 8 Pcs 2.00 2
Pcs 3" 4 Pcs 6" line produces excellent narrow
width slit coil with minimum burr. Thickness
range of .015-.060. Line can slit thicker then
.060 if as larger drive motor is used. Carbon
steel (1008-1095) and stainless steel (200-400
series) were primarily processed on this line.
Available for inspection at our warehouse
Used 24" Waterbury Farrel slitter. Slitter
head and other components have been well
maintained. Line was de-commissioned last
summer and replaced by a new slitting line.
All
drive motors and other components are in
working condition. This is a decent close
tolerance line.
The re-coiler has a hydraulic push off plate.
The scrap winder is also run by hydraulic. The
overarm separator is controlled by air
pressure |
|
| Ad # 10680 | Cold Saws & Power Hack Saws |
| 2006 |
Scotchman |
VS-CPO350LT |
Very Good |
Sold |
Photo /
More Info. |
| 14" blade; 4-7/8" round tube; 2" solid: Tubing capacity:@ 90 deg
Round: 4-7/8"
Square: 4-1/2" x 4-1/2"
Rectangle: 5-1/2" x 4"
spare blade
Solid Capacity:@ 90 deg
2" rounds
2 x 2" square
mitre : 135 deg, 90 left and 45 right
variable cutting speed: 12-82 RPM
7 gallon coolant tank
|
|
| Ad # 10669 | Fully Automatic Horizontal Band Saw |
| — |
Marvel |
15A-7/M8/M10 |
Needs Work |
SOLD |
Photo /
More Info. |
| 16.5" rounds: 16.5" rounds
20 x 16 rectangle
1-1/2" blade
|
|
| Ad # 3301 | Horizontal Band Saws |
| 1982 |
HEM |
1200A |
Needs Work |
Sold |
No Photo /
More Info. |
| Semi Automatic Band Saw: 16" capacity round
20" flat bar capacity
1-1/4" blade
|
|
| Ad # 11554 | Cold Saws & Power Hack Saws |
| 2011 |
C-370A NC |
KMT |
Demo Machine |
sold |
Photo /
More Info. |
| ferrous cutting cold saw-4.5" round: RECOMMENDED CAPACITIES
Round . . . . . . . . . . . . . . .4.5"
@45° right . . . . . . . . . . . .4.5"
@45° left . . . . . . . . . . . . .4"
@60° right . . . . . . . . . . . .4"
Square . . . . . . . . . . . . . .4"
@45° right . . . . . . . . . . . .4"
@45° left . . . . . . . . . . . . .4"
@60° right . . . . . . . . . . . .3.5"
Rectangular . . . . . . . . . .3.5" x 7" wid e
@45° right . . . . . . . . . . . .4.75" x 3.5"
@45° left . . . . . . . . . . . . .4.75" x 3.5"
@60° right . . . . . . . . . . . .3.5" x 3.5"
Maximum Vise
Opening . . . . . . . . . . . . . . .7.125"
Vises . . . . . . . . . . . . . . . . . .Pneumatic, infinitely variable clamping pressure
Weight Capacity . . . . . . .1000 lbs
Blade Spindle Speeds .13-89 rpm, infinitely variable
Blade
Specifications . . . . . . . . .121/2" (315mm) thru 14.5" (370mm)
Blade Mounting
Specifications . . . . . . . . .40mm Arbor, with 2 pins,
10mm on 63mm bolt circle
Sawing Force . . . . . . . . . .Infinitely adjustable
Motors . . . . . . . . . . . . . . . .Blad eDrive 4 HP/Coolant 200 watt
Work Height . . . . . . . . . . .35.25 inches
Automatic Feed
Lengths . . . . . . . . . . . . . . .1/8" to 20" (with 1 feed)
1/8" to infinite (with multiple feeds)
Barfeed Accuracy . . . . .±0.005"
Leftover Material
Length . . . . . . . . . . . . . . . .5"
Coolant Capacity . . . . . .5 gallons
Net Weight . . . . . . . . . . . .1875 lbs
Machine
Dimensions . . . . . . . . . . .across front, 98"; front to back, 36"; 64" high
The CT 350 A-NC is a high
speed circular sawing machine
designed for high production
rates of aluminum extrusions,
small aluminum solids, and other
non-ferrous materials. A carbide
tipped sawblade and spray mist
coolant routinely yield rms 50
quality cuts. Double vising
provide safety and quality. |
|
| Ad # 11553 | Fully Automatic Horizontal Band Saw |
| 1991 ? |
Do-All |
C-260A-2 |
Good |
sold |
Photo /
More Info. |
| 10" round cap.-Auto feed: Vise jaw cap: 12" H x 10.25W x 10.25 Deep
Cap, 9"x12" rectangle cap
SPECIFICATIONS & DESCRIPTION: std specs below-
please verify
Sawing capacity range: 9" x 12" rectangle
Blade size: 1-1/4" W x 12' overall length
Automatic indexing capability
Adjustable blade pressure
Variable feed
Variable blade speed adjustment (60-350 fpm)
Coolant system
Stock feed clamp
ELECTRICS: 5 HP Main Drive Motor 220/440v / 3
wired 440/3 Ph / 60 HZ
|
|
| Ad # 14278 | Cold Saws & Power Hack Saws |
| — |
Trennjaeger |
UN1-16/60 |
Good |
SOLD |
Photo /
More Info. |
| ferrous cutting: Trennjaeger/Promacut manual circular saw # UN1:16/60
blade size: 20" dia
motor size: 10 HP |
|
| Ad # 2014 | Cold Saws & Power Hack Saws |
| — |
Delta |
115-6534 |
Good |
SOLD |
Photo /
More Info. |
| 10" Dia Blade Abrasive saw: manual operation
Mitre cutting
stand
25" x 20" table
10" dia blade
|
|
| Ad # 14264 | Pipe, Tube & Bar Cut Off (Production) |
| — |
Leco |
CM-15 /822-100 & 831-300 |
— |
sold |
Photo /
More Info. |
| —: Leco CM-15 cut-off saw-bench top unit
abrasive blade type
coolant system included
wheel size: 10" x 1/16" x 1-1/4" leco # 811061 |
|
| Ad # 14762 | Vertical Band Saws |
| 2014 |
Grizzley |
G8144Z |
Excellent |
sold |
Photo /
More Info. |
| 12" throat: Grizzley #G8144Z vertical band saw
This versatile bandsaw allows intricate cutting
of
aluminum or brass to tool steel. Features a
blade
welding station which includes a cutter,
welder,
annealer and a grinder. Ideal for making inside
cuts and quick repairs.
Features:
•Variable speed from 104–1300 FPM
•Blade welding station includes cutter, welder,
annealer and grinder
•Left, right table tilting control
•Integrated chip pan
•Upper and lower blade guides
•Work light
•Wheel brush
Specifications:
•Main motor: 1 HP, 220V, 3-phase, 1725 RPM with
single-phase inverter
•Grinder motor: 1/8 HP, 220V, single-phase
•Power source: 220V, single-phase, 60 Hz
•Maximum cutting height: 5-1/8"
•Throat capacity: 12-3/16"
•Blade length range: 94-1/4"–98-1/4"
•Blade size range: 1/8"–3/8"
•Blade speed: Variable, 104–1300 FPM
•Electric welder: 1.2 KVA
•Table tilt: 45° right, 15° left
•Floor to table height: 34-5/8"
•Table size: 18-1/8" x 22-1/8"
•Overall dimensions: 34" W x 59-7/8" H x 21-
1/4"
D
•Approximate shipping weight: 428 lbs.
Note: like new includes 3 spare blades and
cutting wax,very nice heavy duty saw for wood
or
metal use!
|
|
| Ad # 10582 | Fully Automatic Horizontal Band Saw |
| 1995? |
Hem |
H90A-B/F |
Good |
sold |
Photo /
More Info. |
| Capacity 12.75" x 12.75" : Specification Description -std specs
Capacity 12.75" x 12.75"
Blade Size 1" x 12' 10" x .035"
Motor 3 HP
Stroke (Single Index) 0 - 24"
Blade Speeds (Adjustable) 60 - 300 SFM
Clamping Pressure (Adjustable) 0 - 1,700 lbs.
Voltage 220 - 440V / 3 / 60
Dimensions O.A. 105" x 86" x 60"H
Equipped With:
* Control console on top of Saw Arm-Bi Function Ctlr
* Semi or Full Auto modes
* Out of stock switch
* Blade break switch
* Shaft driven power blade brush
* Variable vise pressure
* 2 each hold down fixtures
* Feed table w/mechanical digital read-out
* Vertical alignment bar
* Flood coolant system
* Wash down hose
* 18" exit support
* 0-24" stroke-single index
spare roller infeed table included-not shown
|
|
| Ad # 8569 | Horizontal Band Saws |
| 1997 |
Dake |
Shark 270 SX |
Good |
Sold |
Photo /
More Info. |
| 10.5 inch rounds: Horizontal band saw-mitre cutting
swing bow arm style
tall work height-ergonomic
10.5" round capacity
Semi-Automatic(cutting arm returns to top position at end of cycle)
2 speed cutting (only 1 speed working) needs minor repair selector switch replaced)
no conveyor |
|
| Ad # 11337 | Tilt Frame Vertical Band Saw |
| 2008 |
Marvel |
Series 8-Mark 3 |
Excellent |
Sold |
Photo /
More Info. |
| 18" throat x 22" height: 2008 Marvel Series 8 Mark 3 vertical tilt frame saw
Less than 30 hrs on machine
options:mist coolant system, air vise & blade QC air gun system
Optional:has 4 sections of 10ft x 21.5" Wide Extra heavy duty conveyor than will sell for $650 each
Features
• 5HP Sensorless Vector blade drive 50-450 fpm.
• Power rapid advance & rapid column return.
• Automatic saw column retract.
• Open lower bandwheel design for better chip control.
• 60 degree tilting in both directions.
• Optional Power tilt.
• Blade stall/brake detection.
• New improved blade tension
• 1.25" blade
• Patent pending Quick Change Column.
• Patent pending Easy Load Guide Blocks.
• 24VDC Controls.
State of the Art Controls.
• All Siemens IEC contactors and control relays.
• ABB IEC Fused Disconnect Switch, NFPA79 compliant.
• State of the Art Siemens S7 PLC.
• All 24 Volt DC Control.
• Allen Bradley Push Buttons.
• High Quality Sensorless Vector Drive.
• UL 508a Listed Electrical Panel.
Capacity @ 90˚ 18" (457 mm) Horizontal, 22" (558 mm) Vertical
Capacity @ 45˚Right 18" (457 mm) Horizontal, 14.5" (368 mm) Vertical
Capacity @ 45˚Left 18" (457 mm) Horizontal, 13" (330 mm) Vertical
Capacity @ 60˚ Right 18" (457 mm) Horizontal, 9.7" (246 mm) Vertical
Capacity @ 60˚ Left 18" (457 mm) Horizontal, 7.3" (185 mm) Vertical
Capacity with 3˚Cant 17.5" (445 mm) Horizontal, 22" (558 mm) Vertical
Blade Speed 50-450 fpm (15-137 m/min) infinitely variable
Feed Range 0-250 lbs. (64 kgf)
T-Slotted Work Table Work area 24.25" x 33" (616 mm x 838mm)
Table Height 34.5" (876 mm)
Bandwheel Diameter 19" (482 mm), cast iron wheels
Coolant System 21 gallons (79 liters)
Blade 15' 4" (4674 mm) long x 1.25" (32 mm) wide, .042" (1.07 mm) thick
Coolant Pump 1/8 Hp
Blade Drive Motor 5 HP (3.75 kw) 1800 RPM
|
|
| Ad # 1896 | Plate Saws |
| 1967? |
Do-All |
MP20 modified |
Good |
Sold |
Photo /
More Info. |
| Large saw with added plate cutting table w/ feed: table size:32"wide x 72"long
6' travel longitudinal
14" deep throat with moveable backgage with 2 axis digital readout for fast set-up in place; without removeable backgage 20" std. machine throat
13" max work height
hyd. table feed system retrofitted
digital readout for exact measurements
takes a 1" or 1-1/4" blade width
can be used to file high speed or saw
40-10,800 FPM cutting speeds
blade welder included
table load:approx:2500lbs +
Cuts up to 4" thick mtl well,but can go more if needed!
Machine HP:7.5? |
|
| Ad # 13349 | Horizontal Band Saws |
| 2012 |
Jet |
HVBS-7MW/414459 |
Excellent |
sold |
Photo /
More Info. |
| 7 x 12 rec: Used Jet HVBS-7MW manual Horizontal saw
Capacity of 7-Inch-by-12-Inch; vise will swivel up to 45-Degree
Powered by a 3/4 horsepower 115-Volt motor
Blade speed can be set manually at 85, 130, 180, 285-Feet per minute
Throat depth is 5-Inch
Able to power through a range of materials, the Jet HVBS-7MW Horizontal/Vertical Bandsaw is great for your home shop or job site use. With its high capacity, swivel vise, and robust 3/4 HP, 115-volt motor, this bandsaw gets the job done quickly and efficiently. It also includes a complete coolant system, vertical worktable, chip brush, adjustable material stop
High Capacity and Swiveling Vise for Versatility and Control
With a capacity of 7 x 12 inches, the HVBS-7MW can handle materials from aluminum to steel. And thanks to a vise that swivels up to 45 degrees, as well as a throat depth of five inches, you gain more flexibility and control over each project.
UL-listed Motor and Manual Speed Set for Robust Performance
The HVBS-7MW owes its robust performance to a UL-listed, 3/4 HP, 115-volt motor, which is balanced by a manual blade set for greater control. You can set the speed at 85, 130, 180, and 285 feet per minute--whichever best suits your materials and job. And a hydraulic downfeed also ensures cutting ease.
High Capacity and Swiveling Vise for Versatility and Control
With a capacity of 7 x 12 inches, the HVBS-7MW can handle materials from aluminum to steel. And thanks to a vise that swivels up to 45 degrees, as well as a throat depth of five inches, you gain more flexibility and control over each project.
UL-listed Motor and Manual Speed Set for Robust Performance
The HVBS-7MW owes its robust performance to a UL-listed, 3/4 HP, 115-volt motor, which is balanced by a manual blade set for greater control. You can set the speed at 85, 130, 180, and 285 feet per minute--whichever best suits your materials and job. And a hydraulic downfeed also ensures cutting ease.
High Capacity and Swiveling Vise for Versatility and Control
With a capacity of 7 x 12 inches, the HVBS-7MW can handle materials from aluminum to steel. And thanks to a vise that swivels up to 45 degrees, as well as a throat depth of five inches, you gain more flexibility and control over each project.
UL-listed Motor and Manual Speed Set for Robust Performance
The HVBS-7MW owes its robust performance to a UL-listed, 3/4 HP, 115-volt motor, which is balanced by a manual blade set for greater control. You can set the speed at 85, 130, 180, and 285 feet per minute--whichever best suits your materials and job. And a hydraulic downfeed also ensures cutting ease.
Cast Iron Construction and Hardened, Ground Worm Gear for Durability
Designed to provide consistent performance even after years of heavy use, this bandsaw boasts sturdy construction, including a heavy cast iron bow and bed, as well as hardened and ground worm gear for extraordinary durability.
Automatic Shut-Off and Coolant System for Safety
To help prevent accidents or loss of control, the saw automatically shuts off after each cut, while a complete coolant system delivers coolant through the blade guides to prevent over-heating and helps ensure smooth, continuous operation.
Adjustable Roller Blade Guides and Material Stop for Precision
For added convenience, the HVBS-7MW features adjustable roller blade guides and an adjustable material stop to accommodate different materials. There's also a chip tray built right in the roller tray to help keep your workspace free of dust and debris, which helps maintain visibility as you work
Product Description
Slices most metals smoothly and quickly. Complete coolant system and automatic shutoff after cut. Cast iron bow and bed. Straight & angle cuts, horizontal & vertical cuts. Roller cabinet has built-in chip tray and chip brush. Adjustable roller blade guides and material stop. 9 3/8in. x 10in. vertical table. HP: 3/4, Cutting Capacity - Flat Stock (in. x in.): 7 x 10 7/8, Cutting Capacity (SFPM): 0-285, Blade Size L x W x Thickness (in.): 90 x 3/4 x .035, Stand Included: Yes, Volts: 115, Blade Type: Bi-metal, UL Listed: Yes, Cordless: No, Variable Speed: Yes, Blade Included: Yes, Cutting Depth at 90deg (in.): 7, Dimensions L x W x H (in.): 49 1/2 x 20 1/2 x 38, Case Included: No, Cutting Angles: 45-90 |
|
| Ad # 11317 | Vertical Band Saws |
| — |
Delta |
20 |
Fair |
Sold |
Photo /
More Info. |
| 20" throat: Delta
wood/metal saw
rpm-75-4500
2 speed gear box
vari speed
tilt table 24" x 24"
it runs |
|
| Ad # 15919 | Fully Automatic Horizontal Band Saw |
| 1995 |
Behringer |
HBP 310/403 |
Fair |
sold |
Photo /
More Info. |
| 12" rounds: Behringer # HBP 310/403 band saw,auto feed,
mitre cut
capacity:12.2" dia x 15.7"
1.25" blade size
motor HP.5.4 HP
Note:std mfg specs below-please verify actual machine
SpecificationDescription
Capacity - Round 90 deg.12.2"
Capacity - Rectangle 90 deg.15.7" x 12.2"
Capacity Round 45deg. Left (WxH)12.2"
Capacity Round 45deg. Right (WxH) (in.)10.6"
Capacity Rectangle 45deg. Left (WxH) (in.)
13.7" x 12.2"
Capacity Rectangle 45deg. Right (WxH) (in.)
10.6" x 12.2"
Miter Range Maximum - Left (degrees)30
Miter Range Maximum - Right (degrees)45
Saw Blade (in.)1.25"
Blade Dimensions (in.)16'5" x 1.25" x .042"
Drive Motor:5.4 HP
Cutting Speed (FPM)65 - 459
Single Stroke Length of Gripper Feed Unit (in.)
47.2"
Approx. Weight6,600 lbs
Overall Dimensions110" x 157"
Cutting capacities up to 39.3" x 31.5" * CNC
programmable length and angle setting * Large
dual column - parallel down-feed design * Fully
automatic hydraulic blade tensioning *
Horizontal and vertical material clamping *
Biased saw blade for cutting of profiles
Note : machines runs, but to get in peak
performance could use some TLC ie:minor leak in a couple hyd. fittings, vertical cylinders could stand to be rebuilt,new idler wheel,and new valve for downfeed regulator about 4-5k in parts. |
|
| Ad # 10267 | Tilt Frame Vertical Band Saw |
| 82?? |
Marvel |
Series 8 mark 2 |
Good |
sold |
Photo /
More Info. |
| Marvel 8 vertical tilt frame saw mark 2: 18 x 22: tilt frame
18" throat
CAPACITY:
NOMINAL ................ 18" X 22"
MAXIMUM ................ 18" X 22-1/2"
BLADE @ 45 DEG NOMINAL . 18" X 12-3/4"
BLADE @ 45 DEG MAXIMUM . 18" X 13"
TABLE WORKING SURFACE ....... 33" X 24-1/4"
TABLE HEIGHT ................ 34-1/2"
NUMBER OF T-SLOTS IN TABLE .. (4) ACCEPTS 5/8" T-BOLTS
BLADE LENGTH ................ 14'6"
BLADE WIDTH/GAUGE ........... 1" X .035
MAXIMUM VISE OPENING ........ 21"
HEIGHT OF VISE JAWS ......... 6"
WIDTH OF VISE JAWS .......... 12"
INF VAR BLADE SPEEDS ........ 50-450 F.P.M.
FEED PRESSURE RANGE, INF VAR. 0-140 LBS.
APPROXIMATE WEIGHT .......... 2,670 LBS.
APPROXIMATE DIMENSIONS ...... 93"X 42"X 87"
EQUIPPED WITH:
- MANUAL TILT OF COLUMN 45 DEGREES LEFT AND RIGHT FOR MITER CUTTING
|
|
| Ad # 13273 | Vertical Band Saws |
| — |
Do-All |
36-3 |
Good |
sold |
Photo /
More Info. |
| 36" throat: Do-All saw
36" throat
# 36-3
0-5,000 fpm
welder
12" work height
tilt table
24 x 30 table plus extension 24 x 24"
Note:hyd table feed system needs work |
|
| Ad # 11180 | Horizontal Band Saws |
| 2006 ? |
Ellis |
1800 |
Good |
sold |
Photo /
More Info. |
| 11" round : Ellis 1800 Horizontal band saw
1800 Mitre Band Saw
Capacity 11” Round at 90°
10” Pipe at 90°
14” Flat at 90°
11” H x 10” W at 90°
9” Round at 45°
8” Pipe at 45°
9” Flat at 45°
11” H x 6” W at 45°
Blade Speeds 70-135-230 FPM
Blade Size 11’0” x 1” x .035
Head Pressure Hydraulic Cylinder
Vise Quick Adjusting
Shut Off Automatic
Motor 1 H.P. 110/220 Single Phase 3 PH 220-440-460-480
Shipping Weight 640 lbs.
Size Table Height 28
Length 66”
Width 29 “
Height 47”
Sealed Oil Bath Worm Gear Standard
Removable Chip Tray Standard
Construction Heavy Steel; Welded & Machined for Accuracy & Dura
|
|
| Ad # 13895 | Fully Automatic Horizontal Band Saw |
| 1992 |
Do-All |
C305-NC |
Good |
sold |
Photo /
More Info. |
| 12" x 12" DoAll C-305NC Programmable Automatic Horizontal Bandsaw: Do-All C305-NC fully automatic shuttle feed band saw
Width capacity: 12"
Height capacity: 12"
Year of Manufacture: 1998
Manufacturer: Doall
Model: C-305NC
Condition: Used
12" x 12" DoAll Model C-305NC Programmable Automatic Horizontal Band Saw
EQUIPPED WITH:
GE Fanuc Series 90/30 PLC Controls. Programmable Control With 20-Job Memory Capacity And Display. Automatic Cut Cycle. Multiple Index Up To 999" Variable Hydraulic Pressure Control To Both The Clamping And Feed Vises. Chip Auger. Coolant. Piece Counter. Discharge Tray. Work Light.
SPECIFICATIONS:
Cutting Capacity: Round 12"
Cutting Capacity: Square 12" x 12"
Blade Size 1-1/4" x 144"
Blade Drive 5 HP
Blade Speed (Variable) 60-450 FPM
Single Automatic Index Length 0-16"
Maximum Multiple Index Length 999"
Approximate Weight 4500 lbs
includes 5ft infeed conveyor shown
Notes: machines was in good running condition when recently taken out of service-just needs a good cleaning.. |
|
| Ad # 15116 | Vertical Band Saws |
| — |
Tannewitz |
TR18 |
Good |
sold |
Photo /
More Info. |
| 18" throat: Tannewitz TR18 vertical band saw
18" throat
work light
vari speed
Rugged Cast Iron Frame eliminates deflection &
vibration for precise cutting. Infinitely
variable
speed for all types of materials. Hand wheel
controlled speed changes. Speed changes while
in
operation w/o stopping or w/o pulley changes.
Maintenance free air pumps to remove chips @ the
cutting point. Machine light. Rubber tires for
better tracking.
Blade Speeds (FPM): 82-384 FPM
Height Capacity (max/in): 10"
Throat Capacity (max/in): 18"
Table Size (in): 22 1/4" x 19 5/8"
Table Tilt: 15° L&R, 10° F&B
Blade Length (approx./in): 140 1/2"
Blade Width (min-max/in): 1/8" - 5/8"
Table Height at 90° (in): 39 3/4"
Floor Space Required (in): 40 1/2" x 22"
Motor: 1HP 1PH 115/230V
NW (lbs): 836 lbs |
|
| Ad # 14563 | Vertical Band Saws |
| 80's? |
Rollin |
EF1459 |
Good |
sold |
Photo /
More Info. |
| —: Rollin # EF 1459 vertical band saw
std specs below:
Roll-In Saw built its reputation on the
versatility and durability of this terrific band
saw – the EF1459, a.k.a, “The Original.” This was
the first saw in America to use a patented
gravity-feed system that saves time and energy.
The EF1459 is actually a horizontal band saw on
a vertical frame. An all-purpose band saw, it
handles all metals, plastics, and woods in a wide
variety of cuts. It is a fast, accurate cut-off
machine that is perfect for notching, slitting,
and slotting. A reliable addition to your shop
floor, this band saw doubles as a contour,
profile, and rip saw.
Accurate Gravity Feed
The EF1459 band saw has a capacity of 14½ inches
under the guides and a 9 inch cut. The blade and
vertical column travel on an inclined track that
feeds into the cut in a straight path. Gravity
enables the blade to find its most efficient feed
rate. Counterweight control provides adjustment
for optimum cutting pressure and long blade life.
The work piece remains stationary and your hands
need not be in the cutting area during cut-off, an
important safety feature.
Hydraulic Feed Control and Blade Shield
The Roll-In Saw Vertical EF1459 is equipped with
a hydraulic safety feed regulator and adjustable
saw blade guard. An adjustable stop can be pre-
set to control the depth that the blade travels
into the work.
High Quality Yet Cost-Effective
The Roll-In Saw EF1459 is equipped with a large,
rigid 18 ½ inch x 30 inch precision-ground table.
Hardened grooved roller guides allow blades from ¼
to ¾ inch wide without adjustment. Blade wheels
have rubber tires to prevent blade slippage. The
band saw comes furnished with an angle plate
swivel work block, large C-clamp, blade/speed
selector chart, blade, one horsepower motor and
switch.
Technical Data
Capacity Under Guides 14 ½”
Throat 8 ¾”
Blade Travel 9” Blade travel into work
Blade Size 3/4” Width x 8/12T x 10' Length .035
thick (bi-metal)
Guards Covers 4 step pulleys, blade and lower
wheel
Guide Rollers for Blade Width 1/4”, 3/8”, 1/2”,
5/8” and 3/4”
Blade Speeds 70, 140, 270 and 525 fpm
Table Precision ground, cast iron table, 18 ½” x
30”
Table Height 30" from floor
Wheels Cast iron, 14” x 1 1/8”
Wheel Tires Replaceable rubber
Motor 1 HP, 110/220V, 60-cycle single-phase;
Dimensions 30” Width x 66” Height x 40” Length
Shipping Weight 650 lbs. F.O.B Cleveland, Ohio
|
|
| Ad # 14556 | Fully Automatic Horizontal Band Saw |
| 1989 |
Kasto |
HBA420AU |
Fair |
sold |
Photo /
More Info. |
| 16.5" rounds or 16.5" x 16.5 rec: Kasto Auto feed Horizontal band saw # HBA420AU
capacity:16.5" rounds or 16.5" x 16.5
rectangle
1.5" blade width
7.5HP motor - NEW MOTOR
smallest possible cut-off length:0.24"
min cut dia:0.4"manual mode,3.1" auto
mode
single stroke mtl feed: 23.6"
multi index feed max:212.6"
speed range: infi variable:65-426 in/min
cut feed infi variable
hyd vise feed system
clamp pressure-infi variable
carbide guides
hyd blade tensioner
coolant 35gal tank
chip auger
all manuals included
loading/rigging fee $800.00 |
|
| Ad # 15014 | Cold Saws & Power Hack Saws |
| 1985? |
Kaltenbach |
KKS400 |
Good |
sold |
Photo /
More Info. |
| 16" blade dia: Kaltenbach KKS400 circular saw
std mfg specs below-please verify actual machine:
saw blade diameter: 400 mm
cutting diameter: 130 mm
feed: 0-1000 mm/min stufenlos m/min
round material: 120 (re+li 90°) mm
flat material: 240 (re+li 90°) mm
round material: 130 (re+li 45°) mm
flat material: 220 (re+li 45°) mm
cutting speed: 10-60 / 7 step m/min
Table dimensions: Ø= 550mm mm
table rotating: 90° re+li °
hole of sawblade: 50 mm
total power requirement: 3,5 kW
weight of the machine ca.: 754 kg
dimensions of machine: L:1,08xB:0,9xH:1,78 m
semi autmatic machine
- application area for HSS tools
- longitudinal cut possible
- on the table there is a scale with nonius
- clamping portal with limit stop
- coolant device
Note:Machine was in running condition when taken out of service has some surface rust but with a little TLC will be a good machine! |
|
| Ad # 13132 | Fully Automatic Horizontal Band Saw |
| 1992 ? |
Do-all |
C305NC |
Good |
sold |
Photo /
More Info. |
| 12" round-fully automatic w/ shuttle: Do-All C305NC horizontal band saw
12" x 12" rectangular
12"rounds
blade speeds: 60-350
control: GE Fanuc Series 90/30 PLC
auto shuttle w 16" stroke
hyd clamp & feed vises
index length length control w dro
auto cycle start
manual joystick for saw head up-hold and auto down
5hp main motor
auger chip conveyor
out of stock
144"x1.25"x.035"blade,
18'back rollers,65" front rollers |
|
| Ad # 9179 | Horizontal Band Saws |
| ?? |
Kalamazoo |
HBS-1018 |
Very Good |
Sold |
Photo /
More Info. |
| 10 in round or 10 x 18 rectangle-single phase: 10 inch round capacity
10 x 18" rectangle
2 HP
1 in blade
coolant
on casters
spep pulley drive
speed range 60-300FPM
Mitre vise jaws..
|
|
| Ad # 13760 | Cold Saws & Power Hack Saws |
| 1991 |
Eisele |
VMS-1 |
Good |
sold |
Photo /
More Info. |
| 4" max: Eisele Ferrous cutting cold saw # VMS-1
vertical column cutting
40/80 rpm
mitre cutting 90-45
275mm blade
220/3
max dia cutting: 4"
max square 4 x 4"
max rec 6.7 x 4
max vise open 7"
|
|
| Ad # 4395 | Vertical Band Saws |
| 1984 |
Jaespa |
AS10M |
Very Good |
Sold |
Photo /
More Info. |
| Quality 40" throat Vertical band saw: Large 40" throat
tilt table
Hyd. table feed
blade welder
2 speed gear box; high low speed range
1" x 15' 6" blade
0-660 FPM speed |
|
| Ad # 14506 | Cold Saws & Power Hack Saws |
| 1997 |
KMT |
C350SA |
Good |
sold |
Photo /
More Info. |
| 4" round for ferrous mtl: KMT Semi-Automatic cold saw # C350SA
14" dia blade or 350mm
unique vertical column design reduces blade
tooth
chipping.
air vise w/ clamp pressure adj.
4 HP motor
2-speed 18-36 RPM for ferrous mtl & stainless
mites 45 deg/LR or 60deg to Right
coolant
vise opens: 7.2 max
cut capacity
4" round/square max or 4 x 7" rectangle at 90
deg
at 45 deg capacity: 4" round or square or 4" x
5"
rec
at 60 deg R max: 3.5" x 3.5" dia |
|
| Ad # 9980 | Tilt Frame Vertical Band Saw |
| — |
Do-All |
TF-14H |
Good |
sold |
Photo /
More Info. |
| 14" throat : 14" throat
75-250 FPM
Hyd tilt head
45 deg tilt
24" work height
Dual hyd. vises
Std Specs below -please verify
Cutting Capacity - At 90 Degrees 14" x 14"
- At 45 Degrees 9-3/4" x 14"
Blade Size 160" x 1" x .035"
Blade Speed (Inf. Variable 105 - 275 FPM
Blade Feed Infinitely Variable
Column Tilt 45 Degrees Right or Left
Table Capacity 1000 Lbs.
Motor - Drive 2 HP 3/60
- Hydraulic 5 HP 3/60
Overall Dimensions (Approx 60" L-R x 94" F-B x
84" H
Weight (Est 2750 Lbs. |
|
| Ad # 11818 | Cold Saws & Power Hack Saws |
| — |
Everett |
20-22 |
Good |
sold |
Photo /
More Info. |
| abrasive cut off saw: Everett Abrasive cut off saw # 20-22
Model No: 2022
•Serial No: 2823
•Abertura max de mordazas: 7"
•Tipo de Disco: Abrasivo
•Ø Disco: 20"
•Ø Int. Disco: 1 1/2"
•Ancho de Disco: 3/16"
•RPM Maximas de Disco: 500
•Motor: 10 HP
•Volts: 220/440
•RPM: 1725
Complete with 10 or 20 HP TEFC motor, magnetic
starter with 110V at the pushbuttons, cabinet
base, "V" chain hold-down vise
Fast, low cost cutting of hardened tool steel
bars, pipe, angle iron, tubing, flat stock,& rod
Capacity: 3" solids, Most 7" shapes
Use a steel blade to cut plastic, and with an oil
mist spray to cut aluminum, copper and nonferrous
material. |
|
| Ad # 11816 | Fully Automatic Horizontal Band Saw |
| — |
Do-All |
C70 |
Fair |
sold |
Photo /
More Info. |
| 13" round cap: Do-all C-64 fully auto matic shuttle feed saw
13" round capacity
1-1/4" blade
0-24" stroke on shuttle
|
|
| Ad # 11808 | Pipe, Tube & Bar Cut Off (Production) |
| 1994 |
Vulcan Tool Corp |
2-3/4" |
Good |
**sold** |
Photo /
More Info. |
| Brehm Tube cutting Mill line -2-3/4" max cap: Vulcan Tool Corp.
2-3/4” max dia
Brehm tube cutter.
It has a magazine type auto loader.
The machine is under power and we have several punch and die combination.
20'ft loader feed system in and out
light curtain system
30" cut length adjuster rod
De-nipper machine included
touch screen control |
|
We found 35 matching ads. Now displaying the remaining 35 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 6985 | Vertical Spindle - Blanchard Type |
| — |
Blanchard |
18-42 |
— |
Sold |
Photo /
More Info. |
| Blanchard Grinder :42" chuck: Specification Description
42" Diameter Magnetic Chuck
Grinding Wheel Diameter: 20"
Max. Height Under Segmented Wheel: 11"
Head Vertical Feed Rate: .004" - .076" / Min.
Wheel Speed: 720 RPM
Chuck Speeds, (6): 6 - 33 RPM
Table Load Capacity, Approx.: 3,000 Lbs.
Approx. Chuck Life Left: 5/16"
Machine Weight, Approx.: 14,500 Lbs.
Equipped With:
Short-Stop Spindle Brake Control
Power Table Traverse
Power Head Elevation
Wheel Dresser
35 HP Spindle Motor
Very Good Condition!
|
|
| Ad # 14458 | Belt & Disc Grinders |
| ? |
Burr King |
1000 |
Good |
sold |
Photo /
More Info. |
| —: Burr King # 1000 sander/buffer
10" x 2 wheel 3/4" double spindle arbor
The Model 1000 deburrs, grains, polishes, cleans,
descales, and buffs at a single station, a single
machine, and a single operator.
- Convenient up-front wheel design takes the
difficult out of the difficult to do parts. -
Convenient spindle position for speedy,
comfortable operator transfer of parts wheel to
wheel. - Versatility of convolute, flap, wire,
fiber, nylon, or bristle brush wheels. -
Versatility enhanced by narrow and wide wheel
capability mix and match wheel sizes and types. -
Rugged oversize hardened and ground spindle with
counter threaded 3/4" diameter wheel arbors. -
Versatility of variable speed control options. -
Work reducing horse power options.
- Smooth velvet touch operation delivered by the
precision you expect from Burr King. - Smooth
quiet micro v drive technology is operator
friendly. - Durability of cast aluminum frame.
*Includes magnetic starter (NEMA 12) and controls
|
|
| Ad # 14397 | Belt & Disc Grinders |
| 2010 |
Grizzly |
G9980 |
Excellent |
sold |
Photo /
More Info. |
| 51-Inch Wide-Belt Sander: wood: When your sanding needs fall under the category of production level, look n... |
|
| Ad # 8991 | Tool & Cutter Grinders |
| 84? |
Cincinnati Milacron |
39313 |
Fair |
SOLD |
Photo /
More Info. |
| 6 x 44 table-universal: 6 x 44 table-universal
swivel head -universal
6 in wheel
3837 rpm
center acc included
3.5" dia wheel 6442 rpm
5" 3 jaw chuck
coolant pump
|
|
| Ad # 14828 | 3 Axis Fully Automatic Surface Grinder |
| 1989? |
Okamoto |
AC124N |
Good |
sold |
Photo /
More Info. |
| 12" x 24": 1989? Okamoto # AC-124N Automatic surface grinder
12 x 24" std. electro magnetic schuck
coolant system
wheel size: 1-1/2" x 25 x 5" hole;max width 2"
manual included
Std: mfg specs please verify actual machine
below..
Motor Driven with 5 HP, 3-Phase, 60 cycle,
230/460 Volt Grinding Spindle Drive. 2 HP
Hydraulic Power Suppy Unit. AC Motor for
Downfeed.
MD Lubrication.
EQUIPPED WITH:
12″ x 24″ Walker Fine Line Electro Magnetic
Chuck
and Controls.
Incremental (Automatic) Down Feed
Hydraulic Power Longitudinal and Cross Feeds
Power Rapid Wheelhead Elevation.
Cross Feed Control
Table Speed Control
Step Feed Control.
SPECIFICATIONS:
Working Surface of Chuck 12″ X 24″
Maximum Grinding Length 24″
Maximum Grinding Width 12″
Max. Dist. Under 12″ Wheel 13.7″
Wheel to Table Top
Maximum Longitudinal Travel of Table
29.5″
Maximum Cross Travel of Table 13.6″
Surface Length of Pad 30″
Surface Width of Pad 11.8″
T-Slot(No. x Width) of Table Feeds 3″ x .669″
LONGITUDINAL MOVEMENT OF TABLE
Hydraulic Feed Per Revolution 1 – 100 FPM
Hand Feed per Revolution 1.85″
CROSS MOVEMENT OF TABLE
Hydraulic Intermittent Feed 0.02″ – 0.8″
Hydraulic Continuous Feed Per Minute 4 – 40
IPM
Hand Feed Per Revolution .25″
Graduation of Handwheel .002″
VERTICAL MOVEMENT OF WHEEL HEAD
Automatic Feed Per Table Stroke (OPT) 0.001 –
015″
Automatic Feed Per Table Reversal 0.001 –
.015″
Graduation of Handwheel .0002″
Hand Feed Per Revolution 0.05″
Vertical Rapid Feed 19 IPM
GRINDING WHEEL (Standard)
OD x Width x ID 12″ X 1.5″ X 5″
Spindle Revolution (60Hz) 1800
Floor Space 78″ X 72″ X 68″
Approximate Weight 4,900 Lbs.
|
|
| Ad # 2132 | Surface Grinders |
| ?? |
Hangchow MT works |
M7130 |
Good |
sold |
Photo /
More Info. |
| 40 x 18 in : 2 Axis Surface grinder: Travels: 40"x,18"y,20"z
Chuck size: 40" x 12" Electro Magnetic
12" dia wheel
4.5KW spindle motor
coolant system
metric dials
0.01mm or 0.0001 in graduation
13" under wheel
manual downfeed
|
|
| Ad # 14789 | 3 Axis Fully Automatic Surface Grinder |
| 1992 |
Okamoto |
ACC 12.24DX |
Good |
sold |
Photo /
More Info. |
| 12 x 24": 1992 Okamoto ACC12.24DX Fully Automatic surface
grinder
includes: coolant system w/ magnetic
seperator
fine pole 12 x 24" walker chuck
over wheel dresser
wheel size: 12 x 2" max
spindle speed: 6500 rpm max
Borazon wheel in spindle
coolant tank
Std mfg specs below-please verify actual
machines
Specification Description
Table Working Surface 12" x 24"
Max Chuck Size 12" X 24"
Max Table Movement (Manual) 29.5"
Spindle Drive 5 HP
Max Distance Wheel to Table 13.6"
Max Table Load (Including Chuck) 925 Lbs.
Max Wheel Size 14" Diameter (12"
x 1.5" x 1"
STD)
Wheel Speed 1,800 RPM
Longitudinal
Feed Rate 3 - 82 FPM
Rapid Wheelhead Feed Rate 40 IPM
Wheelhead
Downfeed Increments .0005" -
.0015"
Automatic Grinding Feedrate .010
- 40 Feet Per Minute |
|
| Ad # 14790 | Cylindrical Grinders (O.D. & I.D.) |
| ? |
Cincinnati |
8 x 12 x 36 |
Good |
sold sold |
Photo /
More Info. |
| 12"dia x 36"length: Concinnati 8 x 12 x 36 OD grinder
OD only
max swing 13"
main motor: 5HP
center distance:36" max
vari speed on work head
universal table
16" dia wheel x 1" on machine
coolant
Note: machine was completly refurbished &
upgraded
then never run,looks great!
rigging/loading fee $1000.00 |
|
| Ad # 11576 | Grinding Parts & Accessories |
| 1999 |
Air Flow Systems |
DT3000P67BF6-HD grate |
Very Good |
sold |
Photo /
More Info. |
| grinding table 40" x 65": Air flow systems -grinding table
40" x 65" work surface
3HP
static pressure gage -to indicate filter
status
pull out cleaning drawers
on movable casters
5 large filters in unit
over 15,000 new |
|
| Ad # 1257 | Cylindrical Grinders (O.D. & I.D.) |
| — |
Landis |
Type E |
Fair |
Sold |
Photo /
More Info. |
| OD Grinder 14" x 35 Universal head: 14" x 35" Capacity
Universal Head
US Variable speed drive |
|
| Ad # 8745 | Surface Grinders |
| — |
Okomoto |
L6-12/14 |
Excellent |
sold |
Photo /
More Info. |
| 6 x 12: perm mag 6 x 12 chuck
up to 8" wheel x 1" wide
sony readout
manual lube
high speed grinding acc included |
|
| Ad # 15928 | Surface Grinders |
| 2015 |
Chevalier |
FSG-2A618 |
Excellent |
sold |
Photo /
More Info. |
| 6 x 18 :2 axis hyd.: 2015 Chevalier # FSG-2A618 2 axis hyd. surface grinder w/ manual z axis ... |
|
| Ad # 14668 | Belt & Disc Grinders |
| 2004 |
timesaver |
1025MD |
Good |
sold |
Photo /
More Info. |
| 24" belt: timesaver # 1025MD sander
24" width belt
vari speed belt table
includes : wet dust collector unit# WPC-5 wet |
|
| Ad # 10414 | Surface Grinders |
| 1986 |
AMW |
S6618EN |
Very Good |
sold |
Photo /
More Info. |
| manual 6 x 18: 6 x 18 table
perm mag chuck
coolant
made in taiwan
cable type table movement-smooth
light
8" wheel |
|
| Ad # 15923 | Cylindrical Grinders (O.D. & I.D.) |
| 1997 |
Toyoda |
GL4EA-50E |
Good |
sold |
Photo /
More Info. |
| Swing 320 mm x 500mm centers: 1997 TOYODA GL4EA-50E CNC Universal OD Grinder with GC 32 CONTROL with auto... |
|
| Ad # 11329 | Centerless Grinders |
| — |
Cincinnati |
2M2H-133 |
Good |
sold |
Photo /
More Info. |
| —: Cincinnati # 2M2H-133 centerless grinder
15 HP
550 RPM
6" wide wheel
20" wheel OD x 14.5" ID HUB
|
|
| Ad # 11330 | Cylindrical Grinders (O.D. & I.D.) |
| 90's ? |
Enprotech/CCI |
G10-20 |
Very Good |
sold |
Photo /
More Info. |
| 10 x 20 OD: Used OD Grinder ENproteck/CCI G10-20
10"Dia x 20" length
50-300 RPM
5 HP
coolant tank w paper filter
uses half dead carbide centers
NO ID spindle but has drop down attach arm for one to be mounted
Wheel: 14 x 1.5"
DRO-on infeed
ways look great--little use on machine
no manuals
some tooling |
|
| Ad # 11332 | Cylindrical Grinders (O.D. & I.D.) |
| 1981?? |
Cincinnati |
DA-370 Plain |
Good |
sold |
Photo /
More Info. |
| 10 x 48": Cincinnati DA 370 Plain Cyylindrical grinder
10 x 48"
spindle travel-
max workpiece weight-
manuals
more info & pix to follow |
|
| Ad # 14024 | Centerless Grinders |
| ? |
Cincinnati |
2M2H2F14 |
Good |
sold |
Photo /
More Info. |
| 3" max cap: Cincinnati centerless grinder
3" max dia grinder
|
|
| Ad # 10332 | Surface Grinders |
| — |
Parker Majestic |
# 2 |
Very Good |
sold |
Photo /
More Info. |
| 6 x 18 manual : 6 x 18 table
6 x 12" electro mag chuck-fine pole variable
strength
step pully speed change |
|
| Ad # 10250 | 3 Axis Fully Automatic Surface Grinder |
| 1999 |
Victor |
1020AH |
Good |
Sold |
Photo /
More Info. |
| 10 x 20 : 3 axis fully auto surface grinder: 1020AH grinder-3 axis fully automatic
2HP
10 x 20 electro mag std pole chuck
over wheel dresser |
|
| Ad # 249 | Belt & Disc Grinders |
| 70's |
B.S. ROY & Sons |
# 510A / 84" x 36"dia |
Good |
SOLD |
Photo /
More Info. |
| ROY- Roll Grinder 36" Dia x 84"travel: Rubber or Steel Rolls, Crowning, Auto-traverse;uses 3" wide belts |
|
| Ad # 14596 | Cylindrical Grinders (O.D. & I.D.) |
| 2012 |
Supertec |
G38P-150-NC |
Good |
sold |
Photo /
More Info. |
| 15" swing x 60"? nc control: Supertec NC OD grinder #G38P-150NC-od only
SPECIFICATIONS:
please verify below--std book specs
GENERAL CAPACITY
Distance Between Centers: 60"?
Swing Over Table: 15"
Max. Grinding Diameter:
14"
Max. Load Held Between Centers: 330
lbs
12" chuck
spare:od wheel hubs included
no id ID attachment
WHEELHEAD
Hand feed travel: 7.8"
Handwheel per division:
0.0002"
Handwheel per revolution:
0.08"
Infeed travel: 9.6"
Top slide sliding travel:
7"
Swiveling angle (R&L):
±30°
Automatic rapid travel:
1.75"
GRINDING WHEEL
Diameter x Width x Bore: 16" x
2" x 5"
Wheel speed: 1650
rpm
TABLE
Swivelling angle (R&L):
±3°
Traverse speed (infi variable):
1.2"~275"/min
Handwheel per revolution:
0.39"
WORKHEAD
Swiveling angle (R&L):
90°
Center taper:
MT4
(option MT5, 5C)
Spindle speed (infi variable):
30~350
rpm
TAILSTOCK
Center taper: MT4 (option MT5)
Quill travel: 1"
INTERNAL GRINDING SPINDLE
Spindle speed:G32P/G38P
12000/18000 rpm
or
25000 rpm
Max. grinding bore: 4.33"
or 2.17"
Max. chucking length:
8"~12.4"
Max. chucking diameter:
6"
MOTOR
Wheel spindle motor:
7.5HP(4P)
Workhead motor:
2HP(4P)
Hydraulic pump:
2HP(4P)
Coolant pump:
.25HP(2P)
Internal grinding motor:
2HP(2P)
MACHINE
Net weight:
12540 lbs
Gross weight:
14520 lbs
Packing dimension: 203"x90"x79"(L
x W x H)
note: machine was 75K new ,needs a
rigger to
load
approx: $ 1200.00 loading fee adder
|
|
| Ad # 127 | Surface Grinders |
| 70's |
BOYER SCHULTZ |
6 X 12 MANUAL |
Good |
SOLD |
No Photo /
More Info. |
| MANUAL 6 X 12 GRINDER: no chuck |
|
| Ad # 10173 | Cylindrical Grinders (O.D. & I.D.) |
| ?? |
Van Norman |
465 |
Very Good |
sold |
Photo /
More Info. |
| 14"swing x 60" centers-crank shaft grinder: Crank Shaft style grinder
14" x 60" centers
2-8" 3 jaw chucks
rapid traverse
wheel infeed
arnole gage
centering stand
24" dia wheel
wheel balancer included
10 spare wheels included
Also with: centering gage, some spare parts,
will hold 0.0005 tolerance no problem
cuts nice -round circles |
|
| Ad # 14569 | Vertical Spindle - Blanchard Type |
| 1987 |
Mattison |
2442 |
Good |
sold |
Photo /
More Info. |
| 42" chuck: Mattison #2442 vertical spindle grinder
42" chuck dia
60 HP motor
coolant
segment type spindle
magnet has approx 60% left to grind flat
paper filter
runs well |
|
| Ad # 15999 | Cylindrical Grinders (O.D. & I.D.) |
| — |
Norton |
Type "C" (OD Plain Grinder) |
Needs Work |
sold |
Photo /
More Info. |
| 16" x 30": NOTE:
THIS IS A PARTS MACHINE. The wheel infeed
mechanism is not working and would require very
expensive work to repair. The rest of the
machine is in good condition
Wheel: 32" diameter x 2" wide
Face Plate: 15" diam.
DBC: 30"
Comes with a number of wheels (various)
|
|
| Ad # 15716 | Surface Grinders |
| ? |
boyer-shultz |
612 |
Good |
sold |
Photo /
More Info. |
| 6 x 12 manual: boyer-shultz 612 manual surface grinder
rack & pinion manual operation
std pole perm mag 6" x 12" chuck
few spare wheels and tools shown |
|
| Ad # 14537 | 3 Axis Fully Automatic Surface Grinder |
| 1990 |
Okamoto |
ACC-124DX |
— |
sold |
Photo /
More Info. |
| 12 x 24" fine pole electro mag. chuck: 1990 Okamoto ACC-124DX automatic surface grinder
12 x 24" fine pole electro mag. chuck
Specification Description-please below verify std specs
WHEEL SIZE 12" X 2" X 5"
MAXIMUM HEIGHT UNDER 12" WHEEL 13.7"
TABLE SPEEDS- INFINITELY VARIABLE 0- 82 FPM
MAX. LONGITUDINAL TABLE MOVEMENT MANUAL 30"
AUTO CROSS FEED INCREMENT 0.002" - 0.80"
AUTO CONTINOUS CROSS FEED 4-40 FPM
CROSS FEED, MANUAL, HAND FEED PER REV. 0.25
GRADUATION OF HAND WHEEL 0.001"
MAXIMUM CROSS FEED, MANUAL 1.4"
AUTO INCREMENTAL DOWN FEED INCREMENTS 0.00005" - 0.0015"
POWER RAPID WHEEL POSITIONING RATE 16 IPM
SPINDLE MOTOR 5 HP
FLOOR SPACE 108" X 76"
WEIGHT 5,300 LBS.
Equipped With:
SERVO-DRIVEN DOWN FEED WITH MPG HANDWHEEL
AUTO INCREMENTAL DOWN FEED FOR BOTH SURFACE AND PLUNGE OPERATIONS
DUAL RATE AUTO DOWN FEED WITH COARSE AND FINE SELECTIONS
DIGITAL DISPLAY FOR VERTICAL AXIS AND CROSS FEED
AUTO TABLE PARK AT COMPLETION OF GRIND CYCLE AND SPARKOUT PASSES
ELECTRONIC HANDWHEEL FOR MANUAL VERTICAL MOVEMENT WITH EACH GRADUATION EQUIVALENT TO 0.00001 IN., OR 0.001 IN.
POWER RAPID WHEEL POSITIONING
HYDRAULIC TABLE TRAVERSE
12 IN. X 24 IN. ELECTR-MAGNETIC CHUCK (fine pole)
VARIABLE HOLD NEUTRIFIER CONTROL AND DEMAGNETIZER-BUILT- IN
COOLANT SYSTEM-
|
|
| Ad # 11055 | Tool & Cutter Grinders |
| — |
Cinncinati |
# 2 |
Fair |
sold |
Photo /
More Info. |
| # 2 Tool & cutter grinder: Cincinnati # 2 tool & cutter grinder |
|
| Ad # 15991 | Surface Grinders |
| 2011 |
Knuth |
HFS-40100 |
Good |
sold |
Photo /
More Info. |
| 8 x 18": Knuth HFS 40100 manual surface grinder
8 x 18" verify?
dro installed
over wheel dresser
coolant-needs pump rebuilt..
Note:The machine is running smooth, only the pump for the cooling liquid is not working right.
|
|
| Ad # 14520 | Surface Grinders |
| 1997 |
Acer |
AGS-618 |
Good |
sold |
Photo /
More Info. |
| 6 x 18" chuck: 1997 Acer AGS-618 manual surface grinder
SPECIFICATIONS WHILE OBTAINED FROM SOURCES DEEMED RELIABLE ARE SUBJECT CHANGE WITHOUT NOTICE
AND TO VERIFICATION BY BUYER:
WORKING SURFACE OF TABLE: 7" x 19"
MAXIMUM GRINDING: 7" x 19"
MAXIMUM CROSS FEED TRAVEL: 7"
MAXIMUM DISTANCE BETWEEN TABLE SURFACE & SPINDLE CENTER: 18"
DOWNFEED HAND WHEEL DIAL PER GRADUATION: 0.0005"
DOWNFEED HAND WHEEL DIAL PER REVOLUTION: 0.1"
CROSSFEED HAND WHEEL DIAL PER GRADUATION: 0.001"
CROSSFEED HAND WHEEL DIAL PER REVOLUTION: 0.2"
SPINDLE MOTOR HORSE POWER: 2 HP
GRINDING WHEEL SIZE: 8" O.D. x 1/2" THICKNESS x 1-1/4" I.D.
SPINDLE RPM: 3,500 RPM
MAXIMUM TABLE LOAD IN ADDITION TO MAGNETIC CHUCK: 440 LBS
NET MACHINE WEIGHT: 1,430 LBS
EQUIPPED WITH:
6" x 18" Acer PERMANENT MAGNETIC CHUCK
HALOGEN WORK LIGHT
2 HP SPINDLE MOTOR
ROLLER WAYS
24 VOLT CONTROL CIRCUIT
COOLANT:PAN/PUMP
MANUAL LUBE SYSTEM
Sony 2 axis DRO
|
|
| Ad # 11911 | Belt & Disc Grinders |
| — |
bader |
— |
Good |
sold |
Photo /
More Info. |
| bader 3" belt: Bader sander
3" wide belt
|
|
| Ad # 4396 | Vertical Spindle - Blanchard Type |
| — |
Blanchard |
# 11 |
Fair |
sold |
Photo /
More Info. |
| 16" blanchard Grinder: 16" magnetic table
coolant
Chuck for diamond wheel included, not for abrasive segments
ways should be scraped to be perfect but not absolute nescessary |
|
| Ad # 14983 | Vertical Spindle - Blanchard Type |
| 1985 |
GMN Muller Nurnberg |
MPS-2-R300 |
Good |
sold |
Photo /
More Info. |
| —: GMN# MPS-2-R300
vertical spindle grinder
12" mag chuck:220mm
traverse feed:165mm
height above table:160mm
wheel size:175mm x 100mm x 76mm
wet grinder
fine infeed:approx: 10mm
min step :1um
220/3
Characteristics
Precision surface grinding machine with
vertical spindle, cup grinding wheel,
frequency-controlled rotary table and high-
precision fine infeed.
Application
Roughing and finishing metals and other
materials at high accuracy requirements. The
machine is especially suitable for grinding
rings, tuning discs, hard alloys and ceramic
insers.
•general component manufacturers
•precision mechanical assemblies
•tool and die makers
•training facilities
Features
•Three phase motor
•Grinding spindle
•Coolant supply
•Splash guard
•Rotary table
•Machine base
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 1315 | Broaching Machines, Vertical & Horizontal |
| — |
Sundstrand |
— |
Fair |
SOLD |
Photo /
More Info. |
| Horizontal broach: 42" stroke
1/2" capacity
no tooling |
|
| Ad # 1958 | Keyseaters |
| 2002 |
Davis- Hansford |
# 5 |
New |
Sold |
Photo /
More Info. |
| 1/4" capacity : tilt table
oiler
1/4" capacity |
|
| Ad # 11811 | Keyseaters |
| 1981 ? |
Davis |
# 5 |
Good |
sold |
Photo /
More Info. |
| davis # 5: Davis # 5 keyseater
tilt table for taper keyway
1-1/2" capacity
no broaches,guides,or clamps included |
|
We found 13 matching ads. Now displaying the remaining 13 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 2295 | Wire EDM Machines |
| 1984 |
Japax/Bridgeport |
LU3B |
Fair |
SOLD |
Photo /
More Info. |
| Wire EDM W/ hole drill attachment: Control: JAPT-3F
14 x 10" travels
25AMP-200volts max.
RS232 Comm port box # VH02
Super drill attachment # SD-1
remote pendant
filter system# PN20x
|
|
| Ad # 11741 | RAM / Conventional EDM Machines |
| 1980 ? |
Belmont |
Maxicut ZNC-S-26 |
Fair |
sold |
Photo /
More Info. |
| small hole driller-30A: Belmont Maxicut S-26 ZNC EDM Drilling Machine
Travels:
X Axis ................................. 11.8"
(300 mm)
Y Axis ................................. 9.8"
(250 mm)
Back Slide ............................. 5.9" ±
(150 mm)
Guide Height Adjustment ................. 5.9" ±
(150 mm)
Z Axis ................................. 13.7"
(350 mm)
Open Height:
Minimum ................................ 2.3"
(60 mm)
Maximum ................................ 8.2"
(210 mm)
Worktable Area .......................... 17.5"
W x 12" D
Workpan Area ............................ 34.2"
W x 22" D
Table Weight Capacity ................... 990
lb. (450 kg.)
Generator Maximum Avg. Current .......... 30 A
Overall Dimensions: 55" L x 63" W x 100" H
Weight (approx.): 3,410 lb.
Electrical: 220VAC, 60 Hz, 3.5 KVA
Hrs: 4836
Belmont Maxicut S-26 ZNC EDM Drilling Machine
|
|
| Ad # 9816 | Wire EDM Machines |
| 1990 |
Mitsubishi |
DWC-90SB |
Good |
Sold |
Photo /
More Info. |
| —: includes
chiller
filter system
manuals
wire threader needs some work, must manually thread wire..
no wire chopper
MITSUBISHI MODEL DWC-90SB WIRE EDM
EQUIPPED WITH:verify ??
"B" Series Controller, w/12” Mono CRT,MDI,RS232,Tape and 3.5” Floppy Drive
Dielectric Reservoir
Controlled Axis----Four simultaneous (X,Y,U,V)
CATALOGUE SPECIFICATIONS:
Max Workpiece-----------17.7" x 13.7” x 6.6” H
Max Work Weight---------264 lbs.
Table Dimensions--------19.2” x 20.8”
Machine Range-----------9.84” x 11.81”
Rapid Rate--------------33.5 IPM
Wire Diameter----------.004” to .012”
Max Wire Feed Speed-----9.84 IPM
Max Taper Angle--------- /- 12 deg.
Dist Lower Bed - Upper Worktable --33.4"
Dimensions, Approx-Control ---28” x 70” x 65”H
Machine-----55” x 46” x 73”H
Reservoir-- 42” x 26”x 41”H
Weight, Approx--Control----- 660lbs
Machine --- 3,960 lbs.
Reservoir-- 375 lbs. (dry)
|
|
| Ad # 11702 | Wire EDM Machines |
| 1996 |
Charmilles |
Robofil 2020-1 |
Good |
sold |
Photo /
More Info. |
| Travels:X-11.8",Y=9.8",Z=9.8": Used 1996 Charmilles Robofil 2020 Wire EDM
Travels:X-11.8",Y=9.8",Z=9.8"
table size: 15.6 x 11.8"
part weight max: 440lbs
Resolution: 1um
max speed : 15mm/s
work tank fluid: 551L
filter system 3 cartridges
Includes transformer for 460/3 from std(factory)
machine voltage of 400 vac/3
no chiller
Std Specs below-please verify below:
TRAVELS:
X AXIS .............................. 11.8"
Y AXIS .............................. 9.8"
Z AXIS .............................. 9.8"
WORKTABLE ........................... 15.7" x
11.8"
MAX. DISTANCE FROM TABLE SURFACE SPINDLE NOSE
USING MECATOOL TOOLING:............ 15.6"
MAX. WEIGHT OF ELECTRODES:........... 55 Lbs.
C-AXIS MOVEMENT ..................... 360 Degrees
ROTARY SHAFT SPEED .................. 20 RPM
MAX. MANUAL SPEED ................... 15mm/s
WORKTANK EFFECTIVE DIMS. ............ 23.8" x
15.7" x 7.2"H
MAX. WORKPIECE WEIGHT ............... 440 LBS.
MINIMUM COMMAND UNIT ................ 0.00004"
RESEVOIR DIMENSIONS .............. 38.5" x 29.6"
x 20.9"H
DIELECTRIC FLUID RES. ............ 200 LITERS
FILTERING PRECISION .............. 3 CARTRIDGES
MACHINE TOOL DIMS:................ 50" L-R, 47" D
X 93"H
APPROX. MACHINE WEIGHT ........... 1,870 LBS.
CNC CONTROL CABINET DIMS:......... 26" x 24" x
76"H
FEATURES:
CHARMILLES CNC CONTROL & POWER SUPPLY
4 AXIS CNC CONTROL (X/Y/Z/C)
14" COLOR CRT DISPLAY
RS232C INTERFACE
All manuals included plus maint records
Some Tooling & Acc Included
Machine was in a clean room environment before
being moved , but was moved and hooked up to power
but never used...
This is a great machine ready to go...wont find
one better for the money!!!! |
|
| Ad # 2130 | RAM / Conventional EDM Machines |
| 1998 |
Sodick |
MM3-Moldmaker 3 |
Excellent |
sold |
Photo /
More Info. |
| CNC Conventional Ram type EDM: CNC control-Neuro Fuzzy 240
40 Amp power supply
Floppy drive
Filter system
Manuals
12"x x 8"y x 10"z travels
24" x 16" x table size
3R rotary tooling system |
|
| Ad # 8744 | Wire EDM Machines |
| 1998 |
Charmilles |
robofil 2020SI |
Excellent |
sold |
Photo /
More Info. |
| 40 x 20 wire: Charmilles CNC CONTROL -generic specs, verify..
Max. Machining Speed: 28 Sq. In/hr
Machining Table with X & Y Axes
Travel X: 12.52"
Travel Y: 8.58"
Maximum Workpiece Dimension: 39" W X 19.9" D
Maximum Workpiece Weight: 1,100 Lbs
Maximum Workpiece Height
(Submerged): 6"
Maximum Workpiece Height: 10.2"
Uvz Axes Unit
Travel U: +1.89"
Travel V: +1.89"
Travel Z: 4.57"
Taper Angle Possible (Part Height): + 30 Deg (2.64")
+ 22 Deg (3.94")
+ 16 Deg (5.90")
+ 12 Deg (7.87")
Measuring Resolution: 0.00002"
Adjustable Manual Speed: 0.01 – 35.4"/min
Anti-collision
Wire Feed
Adjustable Wire Speed: 0.7 to 49 Ft/min
Adjustable Wire Tension: 0.7 to 6.6 Lbs
Size of Wire Spools (Standard): 4 to 8 Kg (9 to 17 Lbs)
Autonomy of Wire (0.010" Diameter
Advancing 39 Ft/min)
4 Kg Spool: 12 Hour
8 Kg Spool: 24 Hour
Upper/lower Machining Heads
Max. Workpiece Height
For Threading/rethreading: 9.84"
Diameter of Closed Guides
(Standard Equipment): 0.004" & 0.010"
Range of Movement of Outer
Flushing Nozzle: 0.280"
Positional Variation of Central
Flushing Nozzle: 0.016"
Work Tank
Dimensions: 39.2" W X 21.3" D X 14.8" H
Capacity: 64 Us Gallons
Dielectric System
Dimensions: 35.4" W X 89.8" D X 45.3" H
Capacity: 265 Us Gallons
Weight, Empty: 1,000 Lbs
Weight, Full: 3,200 Lbs
Number of Paper Cartridge Filters: 16
Autonomy (With High Rough Cutting
Speed): Approx. 250 Hours
Maximum Worktank Temperature
Variation: + 1 Deg F.
Injection Pressure
Adjustable Between: 0 to 280 Psi
Number of Programmable Flushing
Pressure Levels: 16
Chilled Water Supply
At 50 Deg F (W/centralized Tower
Systems): Approx. 100 Gallons/hour
Compressed Air Supply
Pressure Range: 90 to 100 Psi
Flow: 60 Cu. In./min.
Electrics: with Transformer 208/3
Taps Range from 190 – 480 Volts
Software options-micro surf & taper expert
includes transformer & chiller
Erowa tooling
cutting hrs 9,300 |
|
| Ad # 1152 | RAM / Conventional EDM Machines |
| 1984 |
Elox |
Workmaster 45 |
Good |
Sold |
Photo /
More Info. |
| Large Sinker Type EDM: 50Amp unit
low hours
filter
chiller
28" x 16" table size |
|
| Ad # 8479 | EDM Parts and Accessories |
| 1993 |
Advantage |
SC-2AY-21HFX |
Good |
sold |
Photo /
More Info. |
| 45-60 deg: Portable Chiller was used on a charmilles EDM temp range 45-60 -55deg std.
refrig 22
|
|
| Ad # 14032 | EDM Parts and Accessories |
| 1999 |
Bostomatic |
BD-12G |
Good |
sold |
Photo /
More Info. |
| Travels are X15, Y10 & Z10 with a 30,000rpm spindle.: Boston digital (Bostomatic 12G electrode milling machine.)
Travels are X15 Y10 & Z10 with a 30,000rpm
This is ultra high precsion machining center, with a Torit dust collector.
Travels are X15 Y10 & Z10 with a 30,000rpm spindle.
Note:the touch screen needs to be replaced |
|
| Ad # 126 | RAM / Conventional EDM Machines |
| 70's |
CINCINNATI |
RAM TYPE |
Good |
Sold |
No Photo /
More Info. |
| RAM TYPE EDM Z-MANUAL: READOUT:X,Y:
MANUAL Z AXIS;
75AMP |
|
| Ad # 10174 | Wire EDM Machines |
| 1995 |
Sodick |
A-320D |
Good |
Sold |
Photo /
More Info. |
| 8" x 12" x 16" submerse tank: travels: 8 x 12 x 16
submerse type wire edm
40 AMP power supply
includes rails
no auto threader
RS232 port
floppy drive
color screen
control: EX21
water filter system
manuals
reburbished in 2007 by EDM systems: went through and re-qualified machine-reground table, new seals. |
|
| Ad # 13734 | Wire EDM Machines |
| 1986 |
Mitsubishi |
DWC110H |
Good |
sold |
Photo /
More Info. |
| travels:17.7 x 11.8 x 10": 1986 Mitsubishi DWC110H
max work piece dim: 21.8 " x 23.6" x 10.2"
travels:17.7" x 11.8 x 10"
max workpiece weight: 1430lbs
table dim: 23.6 x 25.9"
table speed: 31 in/min
wire dia: 0.002-0.013 inrange
wire feed rate: 9.98 in/sec max
wire tension: 0.44-5.4 lb
no chiller
New wire guides and contacts.
Extra wire and filters.
No wire auto threader.
No tooling.
Wired for 220 volts 3PH.
Manuals an system disks.
rigging/loading feed add $1500.00
Still in production runs good but will be taken out of service on 1-30-14 |
|
| Ad # 11802 | Wire EDM Machines |
| 1995 |
Mitsubishi |
CX 20 |
Good |
sold |
Photo /
More Info. |
| 50 AMP: Travels:19.6" x 13.7" x 12.0" travels: Mitsubishi CX 20 Wire EDM-50 AMP
Machine Spec -please verify
Machine Travels (X,Y,Z) - 19.6" x 13.7" x11.8"
Machining Travels (U,V) - 1.9" x 1.9"
Max Workpiece Dimensions - 33.4" x 25.5" x 11.6" if submerged is 10.4"
Max Workpiece Weight - 1760 Lbs.
Table Dimensions - 29.1" x 23.2"
Wire Diameter Range Capability - .004" to .012"
Control / Power Supply Dimensions - 26" x 24" x 58" H
Control / Power Supply Weight, Approx - 250 Lbs.
Filtration System Dimensions - 44" x 57" x 59"
Filtration System Weight, Approx - 485 Lbs. (dry)
Machine Dimensions - 69" x 79" x 85"
Machine Weight, Approx - 3307 Lbs.
Power Requirements: 3-phase 200/220 VAC + 10%, 50/60 HZ + 1 HZ, 13.5 kVA
Equipped with:
Mitsubishi CNC 5 Axis Adaptive Control w/color CRT
Submerged machining capability
Auto Wire feeder threading
Filtration System
Chiller
Manuals
Minor tooling & spare parts included
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 1016 | Lapping & Polishing Machines |
| — |
Hahn & Kolb |
DRP/ NR45 |
Fair |
sold |
Photo /
More Info. |
| Lapping Machine: — |
|
| Ad # 1013 | Horizontal and Vertical Hones |
| — |
Sunnen |
MBB1680-C |
Fair |
sold |
Photo /
More Info. |
| Sunnen Hone-Power Stroke type: power stroke option included;
needs minor work-new drive belt;
no tooling included |
|
| Ad # 12050 | Horizontal and Vertical Hones |
| 2007 |
Sunnen |
VSS 84E-S26 |
Good |
sold |
Photo /
More Info. |
| SUNNEN VSS 84E Hone:Diameter range 5.92 mm – 19 mm: Attached please find photos of the Sunnen VSS 84E, New 2007
4 spindles, 8 work stations
Diameter range 5.92 mm – 19 mm
Max work height 150 mm
Max workpiece size 150 mm cube
Spindle motor 10 HP
Spindle speeds 100 – 2500 RPM
Stroking speed 250 – 6350 mm/min
Stroke travel 400 mm
Floor space 2.3m x 1.9m x 2.4m
Approx weight 1650 kgs
The hone has less than 200 hours.
SPECIFICATIONS:additional specs-verify
DIAMETER RANGE (ID):.................................... 5.92 - 19.00 mm (0.233-0.748")
WORKPIECE
MAXIMUM HEIGHT:.......................................... 150 mm (5.9")
MAXIMUM SIZE:................................................ 150 x 150 x 150 mm (6 x 6 x 6")
SPINDLE
SPINDLE PSEED RANGE:.................................. 100 TO 2500 RPM
SPINDLE MOTOR:.............................................. 10 HP
STROKING (BALL SCREW DRIVE)
SPEED RANGE:................................................... 250 to 6350 mm/min (10-250 IPM)
VERTICAL TRAVEL:.......................................... 400 mm (15.7")
INDEXING TABLE
WORKPIECE & FIXTURE MAX. WEIGHT:.......... 113 KG (250 LBS)
COOLANT SYSTEM CONNECTION
SUPPLY PORT:...................................................... HOSE BARB FOR 25 mm (1") ID HOSE
RETURN PORT:..................................................... HOSE BARB FOR 51 mm (2") ID HOSE
ELECTRICS
REQUIREMENTS:.................................................. 440/460 V,50/60 HZ, 35/30 A
CONTROL:............................................................. INDUSTRIAL EMBEDDED PC
TEMPERATURE RANGE:...................................... 0 DEGREES TO 35 DEGREES C (32- 95 DEGREES F)
FLOOR SPACE:...................................................... 2348 H x 2248 W x 1886 D (92" x 89" x 74")
WEIGHT:................................................................. APPROX. 3,550 LBS.
EQUIPPED WITH:
"COSEMA" COOLANT SYSTEM WITH FILTRATION
USED FOR TWO TO THREE WEEKS FOR ONE JOB,
THEN NEVER USED AGAIN
|
|
| Ad # 11999 | Horizontal and Vertical Hones |
| — |
Sunnen |
LB1499 |
Good |
sold |
Photo /
More Info. |
| —: Sunnen LB 1499 hone
W/ AG 300 test gage # 10233
cast base
no tooling |
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 13445 | Gear Shapers |
| 1975 |
Fellows |
10-2 |
Good |
sold |
Photo /
More Info. |
| 10" dia: Fellows Model 10-2 Gear Shaper
10" Max Diameter
2" Max Stroke
3'' Riser
4 DP
vari-speed stroke: 210-1260 / 105-630
Cutting Aerospace parts, tight tolerances!
Under Power for limited time & priced for quick removal !
MACHINE SPECIFICATIONS:
* Max pitch diameter (External)-10"
* Max pitch diameter (Internal)-10"
* Max face width, external & internal- 2"
* Max diametrical pitch spur- 4 DP
* Max diametrical pitch helical- 5 DP
* Bore through work spindle- 5.875"
* Cutter spindle diameter- 3.543"
*Distance between work table & cutter spindle 15"
* Max. OD of fixture- 19"
* Dimensions (L x H x W)- 91"x 97"x 60"
* Machine net weight, approx.- 13,000 lbs.
Machine Equipped With:
* 3 Cut
* Cutter at top
* 3 Inch riser
* Misc Change Gears
|
|
| Ad # 11289 | Gear Hobbers |
| 1968 |
Pfauter |
P630 |
Good |
sold |
Photo /
More Info. |
| 25" Dia max: PFAUTER VERTICAL GEAR HOBBER MODEL P630
refurbished in 2000...little use since
includes all change gears-complete set
It does have differential for cutting helical gears.
PFAUTER VERTICAL GEAR HOBBER MODEL P630
SPECIFICATIONS:std specs below-please verify
actual machine
one cut type machine
Maximum Workpiece Diameter- 25"
Maximum Pitch Module- 3 DP
Maximum Axial Traverse- 17-1/2"
32mm arbor size
Minimum Center Distance- 2"
Hob Speed Control- 62-390 RPM
MACHINE IS EQUIPPED WITH THE FOLLOWING:
* Change Gears
* Arbor
lots of hobs -sold seperatly-not shown
Very nice machine! Was rebuilt in 2000
Rigging fee to load onto buyers truck:$1800 |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 11648 | Marking Machines |
| — |
Mecco-Automator |
MV-35S |
Very Good |
sold |
Photo /
More Info. |
| pneumatic marking machine:Marking Equipment - Spring Actuated Pneumati: Mecco corp-Autmator marking machine
Marking Equipment - Spring Actuated Pneumatic Press
Pneumatic operation-foot pedal
9.5 x 9.5 table area
7 rows of numbers on std. head
7.5" throat depth
Piston 120 TigE25
Head # HGAD# NU14A14189 ...# 8535042
mounted to steel table base
std factory specs below-please verify
Max. Impact (tons) 7-1/2
Overall Height 32-3/4”
Column Dia. 3.936”
Throat Depth 7-3/4”
Throat Height* 12-1/4”
Shank Size :16mm
Table Size : 9-1/4” x 9-1/4”
“T” Slot Center :120mm
“T” Bolt Size :” 3/8”
Base Size 11-3/4” x 19-3/4”
Available Springs 3
Net Weight (lbs) 340
Air Pressure Reg. PSI 50/100 PSI
Free Travel Prior to Trip 2-3/8”
Durable Technologies' pneumatic presses are simple to set up, easy to operate and offer excellent repeatability. Pneumatic presses provide a safe, consistent mark for high-volume marking applications. Your pneumatic press can be provided with or without dual hand controls.
Pneumatic Press Principles of Operation
The press contains a large spring that is compressed during energy section travel. When release point is reached, the compressed energy is released causing the internal hammer to deliver the powerful impact.
Step 1 - Energy section advances toward workpiece by gear rack and pinion, powered by double-acting pneumatic cylinder (pneumatic units) or by operator pulling lever (manual units).
Step 2 - Once the press stroke is engaged and the workpiece is contacted, the press stroke continues. The workpiece is held in place by the pressure from the energy section. The Impact Spring is compressed and builds force as the press continues to maintain contact with the workpiece.
Step 3 - When ball bearings reach release point, the powerful impact is released. The Impact Spring delivers force to the hammer, which in turn strikes the plunger (tool holder).The result is a strong impact from a small press.
demo video URL: http://www.youtube.com/watch?v=iBnRHCbGb6Y&feature=player_embedded |
|
We found 20 matching ads. Now displaying the remaining 20 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 11774 | Power Squaring Shear (Hydraulic) |
| 1998 |
AFM |
MK6-21 |
Excellent |
sold |
Photo /
More Info. |
| 10ft x 1/4" cap: 10 ft x 1/4" mild steel capacity
124" max cut length
power back gage-32"
6ft squaring arm
roller table
Quality european built-HD
adj. mtl thickness lever 1/32, 1/16, 3/16, 1/4"
foot pedal
very nice machine-low hrs |
|
| Ad # 11638 | Power Squaring Shear (Mechanical) |
| — |
Niagara |
272 |
Good |
sold |
Photo /
More Info. |
| 6ft x 12-14 ga: 6ft =72" cut length max
12-14GA max cap.--verify ??
foot pedal
front support arms-36"
manual back gage
blade looks good
very minor table rust
3HP main motor |
|
| Ad # 7932 | Power Squaring Shear (Mechanical) |
| 1956 |
Niagra |
A119806 |
Good |
SOLD |
Photo /
More Info. |
| 8 ft x 14Ga. capacity Mechanical Shear: 8ft length of cut
14Ga. mild steel capacity
work light
spare set of blades
all manuals
front support arms
2 HP
24" manual back gage |
|
| Ad # 11582 | Power Squaring Shear (Hydraulic) |
| 1998 |
Betenbender |
8-10GA |
Good |
sold |
Photo /
More Info. |
| 8ft x 10ga (1/8") hyd.: ** MADE IN THE U.S.A. **
BETENBENDER HYDRAULIC SHEAR QUOTE
Model 8-125, 8-10ga
8' x 10 Ga.(mild steel) 1/8"
Have Manual
Note: Can be easily upgraded to a (3/16" capacity) for additional $1750.00
SPECIFICATIONS:
Capacity - A-36 Mild Steel (80,000 lb. tensile) 10Ga.
304 Stainless Steel(At Highest Rake) 10 Ga.
Main Motor (H.P.) ............................ 10
Nominal Cutting Length ........................ 100 inches
Number of Holddowns ........................... 15
Knives (Four(4) Cutting Edges) ......... 100"x1"x3"
Rake of Moving Blade (per foot) ......... 1/4
Back Gauge Range 36 inches
Strokes Per Minute ............................ 32
Oil Reservoir (Hydraulic Oil Included) 42 Gallons
Shipping Weight ..................... 7,000 lbs.
Machine Dimensions:
Overall Height ................. 55 inches
Overall Length ................. 121 inches
Overall Width .................. 74 inches(Including Back-gauge)
Electrical Requirements ........ 230V-28amp
Recommended Power Line...... 230V-8ga
BED - Steel one piece box section, stress relieved; welded to side frame insures positive alignment of bed and housings with beam supports that have removable wear tops which allow (1) convenient change to solid top and (2) plates with pin gauging.
RAM - Steel, stress relieved. Truss rod construction assures blade parallelism without consuming, short span adjustments.
POWER RAKE - allows change of blade rake angle for minimum camber & twist.
HYDRO-MECHANICAL HOLDDOWN - firmly grips material to prevent movement and
tipping. Optional urethane gripping pad protects soft and polished materials from marking.
NON-METALLIC GIBS - provides long service life and allow minimum running clearance for accurate control of blade clearance setting.
FOOTSWITCH CONTROL - is activated from a fully shrouded portable footswitch operating on 120 volts.
DRIVE - two hydraulic cylinders pushing or pulling directly on cross-head, no rotating pin action saving on wear.
HYDRAULIC VALVES - in manifold block for a minimum of fitting and piping; "C" frame motor for precision alignment of pump.
STANDARD EQUIPMENT
36" Power Backgauge Hour Meter
With L.E.D Readout
48" Squaring Arm With Inlaid Scale
NEMA Electrics Light Beam/Shadow Line
All Hydraulic Fluid Included All Steel Construction
American Made Motor Disconnect Switch
Hydraulic Self-Compensating
1” x 3” Knives - (4) Cutting Edges
Holddown Bar Assembly
Disconnect Switch
Power Adjust Variable Rake
Manual Swing-Up Backgauge
neoprene hold down caps
|
|
| Ad # 6602 | Power Squaring Shear (Mechanical) |
| — |
North Hill |
16" x 0.094Ga |
Good |
SOLD |
Photo /
More Info. |
| 16" Length Shear x 12-14 Ga Capacity: 0.094 steel : 16" blade
0.094 mild steel capacity |
|
| Ad # 15946 | Power Squaring Shear (Hydraulic) |
| 2008 |
Cincinnati |
1816G |
Good |
sold |
Photo /
More Info. |
| 10 ga capacity x 16ft cut length: Cincinnati # 1816G hyd. shear
16ft x 10ga(1/8")capacity
The middle ball screw on the back gauge has been removed.
Automated front gauge
48” automated back gauge
Manuals present
square arm & front supports as shown
Still has two knife turns
manuals included
note: cant move out till sometime in october..
|
|
| Ad # 10632 | Foot Stomp & Air Operated Shear |
| 2007 |
Import |
52 x 16ga |
Very Good |
Sold |
Photo /
More Info. |
| stomp shear 52" x 16GA: 52" x 16ga stomp shear
front sheet support arms
blades look very good.. |
|
| Ad # 10581 | Power Squaring Shear (Hydraulic) |
| 1996 |
Accushear |
850012 |
Good |
sold |
Photo /
More Info. |
| 12 ft x 1/2" capacity: 12ft x 1/2" mild steel capacity
1996
6ft squaring arm-not shown
front roller tables-not shown
manuals
power back gage |
|
| Ad # 16038 | Power Squaring Shear (Mechanical) |
| 1964? |
Cincinatti |
1810 |
Good |
sold |
Photo /
More Info. |
| 10ft x 1/4" open ended: Cincinatti # 1810 mechanical shear
capacity 10ft x 1/4"
manual back gage-needs minor work
note: missing a few hold down on front has 6 shown (yellow)
runs good
|
|
| Ad # 1959 | Power Squaring Shear (Mechanical) |
| 60s |
Niagra |
# 16 |
Fair |
Sold |
Photo /
More Info. |
| 6 Ft-14Ga Electric .Power Squaring shears- : 6 Ft. capacity x 14Gage
Air Mtl. clamp hold downs
Electric stroke
oiler |
|
| Ad # 15296 | Power Squaring Shear (Hydraulic) |
| 2012 |
Standard Industrial |
AS375-10 |
Excellent |
sold |
Photo /
More Info. |
| 10ft x 3/8": Model: AS375-10 STANDARD INDUSTRIAL 10' X 3/8" Hydraulic Power Shear,
(New 2012)
Specifications:
Capacity, mild steel:10' x 3/8"
stainless steel: 10ft x 1/4"
Shearing tons:60
Number of hold downs:11
Bore of hold downs:2"
Hold down force:21 tons
Equipped With:
Guillotine design, American built, single horizontal hydraulic cylinder
All steel construction (80,000 PSI capacity rated)
Manually operated, side adjustable, quick-change blade gap adjustment
Shadow line for precise shearing
PLC touch screen control mounted on swiveling pendant
36" Capacity heavy duty front operated power back gauge controlled from PLC.
The back gauge is equipped with Go-To function, multi-job programming, pro-
grammable back gauge retraction, inch/metric conversion, and
stroke counter.
4' Capacity right hand squaring arm with precision inlaid scale
(2) Front support arms
(2) T-slots & (2) hand slots in heavy duty machine table
Remote electric foot pedal
(2) extra Sets of shear blades
Machine is wired for 3/60/460 volt operation.
Approximate Weight: 21,000 Lbs.
|
|
| Ad # 10466 | Power Squaring Shear (Mechanical) |
| — |
Pexto |
S-2120C |
Good |
sold |
Photo /
More Info. |
| 10 ft x 14GA: 10 ft bed
14GA mild steel capacity
front support arms
|
|
| Ad # 13324 | Power Squaring Shear (Hydraulic) |
| 1998? |
Atlantic |
HD-25-12 |
Good |
sold |
Photo /
More Info. |
| 13' x 1/4": Used Atlantic Hydraulic Power Shear
Model: HD25-12,
Capacity: 1/4" x 13'
Capacity (Mild Steel) 1/4"
Max. Cutting Length 13'
Rake angle 1.3 Degree
Number Of Hold Downs (Hydraulic) 21
Back Gauge 1" - 39"
Stroke Per Minute 15 - 45
Dimensions 190" x 86" x 72"
Weight 24,000 LBS.
Equipped With:
Front Operated Power Back Gauge
Power Rake Adjustment
Power Stroke Length Control
Square Arm
Ball Transfer Table
Electric Foot Pedal
Horsepower:20
|
|
| Ad # 7467 | Foot Stomp & Air Operated Shear |
| 2006 |
Import |
4 -16 |
Demo Machine |
Sold |
Photo /
More Info. |
| 52inch . x 16Ga. Stomp Shear: 52" cut length
16Ga. capacity (mild steel)36" manual back gage
angle/mitre gage stop
front support arms |
|
| Ad # 8246 | Power Squaring Shear (Hydraulic) |
| 2002 |
National |
NH4825 |
Excellent |
sold |
Photo /
More Info. |
| 4ft x 1/4in National Hydraulic Shear: Length: 4 ft
1/4" mild steel capacity
1/8" Stainless steel
20 strokes per min
24 gal oil res.
7.5 hp |
|
| Ad # 15106 | Power Squaring Shear (Hydraulic) |
| — |
Guifil |
GH325 |
Good |
sold |
Photo /
More Info. |
| 10ga x 8ft hyd . shear : Guifil # GH325 Hyd. Shear
capacity:10ga=1/8" mild steel or 16 ga stainless
8ft bed length
steel
front support arms
squaring arm
cut length: 8ft
foot pedal actuation
Rake angle........... 1.7 degrees
Strokes per min. ..... 44 SPM
Back gauge travel..... 19.5”
Motor HP ......... 5hp
Weight.... 5,200 LBS |
|
| Ad # 15109 | Power Squaring Shear (Hydraulic) |
| 1984? |
National |
NH7225 |
Good |
sold |
Photo /
More Info. |
| 1/4" x 6ft: National Hyd Shear # NH7225
capacity: 6ft x 1/4"mild steel
front sheet support arms-2
•Heavy cast iron body
•Four cutting edge high carbon, high chromium
blades
•Hydraulic holdown
This 6 foot National shear offers steel cutter
heads and tables. Standard with hydraulic rubber
inserted hold downs, quick adjusting back gauge
for direct reading with a positive lock, front arm
extensions, table gauges, heavy duty foot switch
and well lighted work area. You receive a full
three year warranty. The hydraulic unit conforms
to J.I.C. standards featuring simplicity of
design. The National hydraulic system is simple to
maintain with standard replacement parts such as
valves, cylinders, hoses and oil. The National
shear is actuated by a portable shrouded electric
foot switch attached to a long flexible cable so
it may be positioned comfortable to the operator.
National Shears have high carbon, high chromium
blades with four cutting edges of premium quality
tool steel and will withstand nicking and wear
better than relieved blades. National blades are
secured to the shear with tempered flat head
screws through countersunk holes in blades.
Complete cuts of full width pieces are 2 inches
longer than specified cutting length. The high
strength cast iron constructed side frames are
made of the highest tensile strength metal needed
for long life and accurate shearing. Underdrive
construction with downward cylinders and major
hydraulics under the bed gives the shear a low
profile. These shears also include a full 3 year
warranty and 5 year warranty against breakage of
the cutter heads and tables.
•Type: hydraulic
•Mild Steel Capacity: 1/4 inch (6.35mm)
•Stainless Capacity: 1/8 inch (3.1mm)
•Cutting Length (inches): 72
•Cutting Width (inches): 72
•Weight (pounds): 6000
•Dimensions (LxWxH): 84 x 98 x 54
note: sells new for $23,150.00 |
|
| Ad # 11976 | Power Squaring Shear (Hydraulic) |
| 1988 |
Betenbender |
1/2 x 10' |
Excellent |
sold |
Photo /
More Info. |
| 1/2" x 10ft: Betenbender 10 ft x 1/2" capacity
open gap type end--can cut continous sheet
36" power back gage -
4' squaring arm
ball table transfers
roller table
power rake adjust
light beam
61 hrs on machine, very nice machine |
|
| Ad # 15005 | Power Squaring Shear (Hydraulic) |
| 1980's |
Cincinnati |
Series 5000 x 12 |
Good |
sold |
Photo /
More Info. |
| 1/2" mild steel x 12ft: Cincinnati Shear: 12ft x 1/2"
Series 5000 x 12
Cap. 1/2" mild steel
Note: std mfg specs below-please verify actual machines
Front & rear gages
CNC controlled
Max. cutting length: 147"
48" Programmable Power swing up back gauge
Power blade clearance
144" Programmable squaring arm
57" Programmable powered CNC front gauge
Programmable rake angle
Main Motor: 50 HP
Front gage - 57"
Back gage - 48"
Approx. weight 28,600#
Wired for 240V 3 phase
Manufactured in the late 80's
Can see in operation |
|
| Ad # 14978 | Power Squaring Shear (Hydraulic) |
| 1975 |
American Hercules |
G28654 |
Good |
sold |
Photo /
More Info. |
| 8ft x 1/4" capacity: American Hercules hydraulic shear #G28654
8ft x 1/4" capacity
squaring arm
25HP motor
manual blade gap adjustment
front support arms
power back gage 36" |
|
We found 26 matching ads. Now displaying the remaining 26 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8080 | Press Brakes (Hydraulic) |
| 1970 |
Promecam |
RG35-20 |
Very Good |
Sold |
Photo /
More Info. |
| 35 Ton -80" bed length: 35 Ton unit W/ tonnage control
80" overall bed length, 66" between housings
8" throat
bottom acting-pushes up on bed
dual palm buttons
12" back gage
|
|
| Ad # 8079 | Straight Apron Brakes |
| 80's ? |
Chicago |
S-818 |
Good |
Sold |
Photo /
More Info. |
| 8 ft x 18Ga. straight brake: 8 ft bending length
18 Ga. capacity steel
blade edge looks good except last 12" on right side is a little nicked up but not major... |
|
| Ad # 8081 | Press Brakes (Hydraulic) |
| 85?? |
Pacific |
J-series # J110-14 |
Good |
Sold |
Photo /
More Info. |
| 110ton 14 ft bed Hydraulic press brake: 110 Ton
14 ft bed length, 150" between housing
8" throat
4 way v die, 1/2?, 5/8", flat Vees
no back gauge
capacity rated at 12 ft x 10Ga(1/8") mild steel |
|
| Ad # 8069 | Press Brakes (Hydraulic) |
| 2002 |
Betenbender |
6-50T |
Very Good |
Sold |
Photo /
More Info. |
| 50 Ton x 6 ft bed: 50 ton capacity
6 ft bed , 65" between housings
power backgage with digital readout display speed control on bacgage
no tooling included
|
|
| Ad # 11734 | Finger Brakes-Box & Pan Brakes |
| 2000 |
Jet |
BP-1648 |
Good |
sold |
Photo /
More Info. |
| 4 ft x 16ga: 4ft x 16GA box & Pan brake
stand included
missing a finger & 4 fingers modified
std specs below-..
Mild Steel Capacity: 16-gauge
Bending Length Capacity: 48-in
Maximum Box Depth: 4-in
Maximum Lift of Beam: 1-1/4-in
Beam Adjustment (front to rear): 5/8-in
Number & Width of Fingers: 5 at 2-in 6 at 3-in 5 at 4-in
Finger Nose Angle: 45 degrees;
Finger Nose Radius: 1/32-in
Footprint Size: 61-in x 21-in
Overall Dimensions: 74-3/4-in x 18-7/8-in x 33-1/2-in
Weight: 462 lbs.
Incorporates all the features of our standard hand brakes but with greater range of applications
With fingers installed it can be used as a full-length nose bar, turning the machine into a straight bending brake
Sectioned fingers are easily removed for box bending and special forming operations
Total of 16 assorted size section fingers |
|
| Ad # 12910 | Straight Apron Brakes |
| 1984 |
Roper Whitner Pexto |
412A |
Excellent |
sold |
Photo /
More Info. |
| 4ft x 12ga: Roper whitney Pexto straight brake
# 412A
4ft x 12 Ga
very heavy duty
nose bar looks very good
nice brake |
|
| Ad # 11637 | Press Brakes (Hydraulic) |
| 2000 |
LVD |
150JS10 |
Very Good |
sold |
Photo /
More Info. |
| 10ft x 150Ton: used LVD Press Brake
10ft bed x 150 Tons
2- Axis CNC Back gage-Hurco Autobend 7 system-36" stroke
100" between Housings
8.5" throat depth
vari-tonnage control
Stroke counter
stroke height adj-5"
10KW main power needed
lots of tooling included
|
|
| Ad # 11577 | Straight Apron Brakes |
| 70's ? |
Chicago |
416 |
Very Good |
sold |
Photo /
More Info. |
| 4ft x 16ga straight brake: chicago straight brake # 416
4ft x 16ga capacity
new nose bar
includes angle iron piece
|
|
| Ad # 6603 | Straight Apron Brakes |
| — |
Dubble Truss |
8' x 16Ga? |
Good |
SOLD |
Photo /
More Info. |
| Wood brake 8' bed x 16-18Ga? Capacity: Would make a great collectors item or showroom display! |
|
| Ad # 14240 | Straight Apron Brakes |
| — |
national |
10ft x 16ga |
Good |
sold |
Photo /
More Info. |
| 10ft x 16ga: national straight hand brake
10ft x 16ga capacity
on casters |
|
| Ad # 9513 | Press Brakes (Hydraulic) |
| 2005 |
Ras |
Flexbend 73.40 |
Demo Machine |
sold |
Photo /
More Info. |
| RAS FLEXIbend Metal Folding System: RAS FLEXIbend Metal Folding System
Model:RAS FLEXIbend 73.40
Maximum Forming Capacity at Full Length
mild steel, tensile 55,000 psi12 gauge
aluminum1/8”
Maximum Length of Forming 159"
Smallest Permissible Inner Bend Radius, (Full Width) 1.25 x gauge
Minimum Flange Height 6 x gauge
Clamping Beam Maximum Speed Up 1.58"/sec
Clamping Beam Maximum Speed down 1.58"/sec
Maximum Folding Speed 90°/sec
Folding Angle Setting Range0-180°
CNC Folding Beam Stroke 3.15"
CNC Lower Beam Stroke3.15"
Clamping Beam Stroke11.81"
Backgauge Positioning Accuracy+/-.004"
Backgauge Maximum Positioning Time2 sec
Backgauge Minimum Position.394"
Backgauge Maximum Position (standard)61"
Backgauge Maximum Position (w/J-shape)159"
ELECTRICAL SPECIFICATIONS
220/440 60 cy 3ph (transformer included)
Amperage: 30 amps
Ambient temperatures of more than +40 degrees C (104 F) may require a special execution
Motor Drive Power: 5.5 HP
Control:
§Touch & More Control
§DNC communication software for a PC with RS232C interface
§Front footswitch movable on rail
§Rear footswitch and keyswitch (one switch front, one switch rear)
§CNC folding beam adjustment for varying sheet thicknesses
§CNC lower beam adjustments for perfect radii
§Picture-based icon programs
§Speed optimizer
Backgauge:
§Integrated CNC backgauge and sheet support system
§Ten finger stops (range .39” to 61”)
§Adjustable stainless steel sheet support panels with ballcasters
§One short sheet support with ballcasters for rear operation (575mm wide x 1200 mm long) 22.6” x 47.2
§Rectangular adjustable angle squaring gauge 67" long
§J-shaped backgauge 159” long with two additional backgauge finge
Tooling:
§16 sections of 7.87" long segmented goat's foot tooling 6.10" tall (126” total)
§2 adapter sets of goat's foot tooling to include the following (24.8” total):
(2-30mm, 2-35mm, 2-40mm,
2-45mm, 2-50mm, 2-55mm, and
2-60mm)
§2 corner pieces (one right/one left) (9.4” total)
§Segmented folding beam tool set .984" wide (up to 12 gauge)
§Segmented folding beam tool set .472” wide (up to 16 gauge)
§Segmented lower beam tool set 1.575" high for down flanges
§Automatic upper beam tool clamping system
§Automatic folding beam tool clamping system
§Integrated folding beam crowning system
§Tool cart
§CNC Crowning
ADDITIONAL OPTIONS AVAILABLE FOR FLEXIBEND:Non purchased with machine-verify
1.Execution with second front footswitch for working with two operators and keyswitch
(required by safety regulations when working with two operators in front)$1,265
2.Movable footswitch on rail – two operator$980
3.3.15" tall rear-free goat's foot tooling (7.87" long)$595 ea
– Adapter set of 3.15" tools$2,255 ea
– Corner pieces$640 ea
4.6.10" tall rear-free goat's foot tooling (7.87" long)$810 ea
– Adapter set of 3.15" tools$2,905 ea
– Corner pieces$670 ea
5.10 basic segments of sharp tooling (15.75")$670/ea
6.Sharp tooling 60mm (2.36”)$185/ea
7.U-shaped backgauge 159” long with ballcasters$7,020
(addition to the standard J-shape)
8.Offline Software$1,880
|
|
| Ad # 13374 | Press Brakes (Hydraulic) |
| 2009 |
Durma |
ADS-25100 |
Excellent |
sold |
Photo /
More Info. |
| Durma 8 Foot, 110 Ton CNC Press Brake w/ 5-axis Backgauge : Durma hydraulic press brake
Durma 8 Foot, 110 Ton CNC Press Brake w/ 5-axis Backgauge
# AD-S 2500 series
8ft/100" bed length, 87" between housings
y2 servo cnc press brake
stroke 4-10"
5 axis back gage-Z1,Z2-cnc controlled(depth-height & independent width)
control: Delem DA66W w/graphics
15HP main motor
230/3
american style die rail included & botton die-optional at added cost-no upper dies
WILA power Pack-upper hyd rail clamp
hyd. top clamp feature
auto cnc crowning feature
2 mechanical front supports included
no tooling
sold for over 125k new
run time hrs 5666.5 strokes: 419,731 as of 9-12-13 |
|
| Ad # 13350 | Straight Apron Brakes |
| 2010 |
Proformer |
— |
Good |
sold |
Photo /
More Info. |
| 6ft x 20ga: Pro Former straight hand brake
6ft x 20 ga |
|
| Ad # 12223 | Press Brakes (Hydraulic) |
| 1992 |
LVD |
80BH03M / NC95 |
Good |
sold |
Photo /
More Info. |
| Hydraulic 8 ft x 88Ton : LVD press brake for sale: # 80BH03M
88 Ton
98"-8'bed with 84" between housings
max 80/03PPI
Hydraulic actuation
foot station & remote safety palm buttons
CNC back gage with LVD/Barco model MNC95/C controls
monitor on cnc back gage display was replaced recently |
|
| Ad # 13290 | Press Brakes (Hydraulic) |
| 1984 |
Brakemaster |
10ft x 150 ton |
Good |
sold |
Photo /
More Info. |
| 150 ton x 10 ft: Brake Master Hyd. Press brake
Tonnage: 150ton
bed length: 10ft
tonnage/pressure control
light curtain
clamp style manual backgage
no tooling included
brake can not be moved until new unit arrives in
july..but can be inspected |
|
| Ad # 13244 | Press Brakes (Hydraulic) |
| 1997 |
Betenbender |
50T x 12ft |
Good |
sold |
Photo /
More Info. |
| 50 ton x 12ft bed: Betenbender 50 Ton capacity x 12 ft bed
manual clamp style back gage
175 hrs on machine
no tooling included
tonnage control |
|
| Ad # 11152 | Press Brakes (Hydraulic) |
| — |
Niagra |
HBM-135-10-12 |
Good |
sold |
Photo /
More Info. |
| 135 Ton x 144" bed: 135 Ton
144" bed length
8" stroke
15" open height
120" between housings
2 axis cnc back gage
no tooling included |
|
| Ad # 11151 | Press Brakes (Hydraulic) |
| 1992 |
LVD |
PPE 175/15-MNC95 |
Good |
sold |
Photo /
More Info. |
| 175 Ton x 204" bed : 148" between housings: 175 Ton Press Brake
204" max span bed
Die is 192"
148" between housing
Max capacity: PPEB 160/45 MNC
2 axis back gage-LVD: MNC 95/C
includes some tooling shown |
|
| Ad # 13204 | Finger Brakes-Box & Pan Brakes |
| 2011 |
Jet |
752102/BP1696H |
Excellent |
sold |
Photo /
More Info. |
| 8ft x 16GA : 8ft x 16GA Jet heavy duty finger brake
nose bar fingers look great
•Mild Steel Capacity (Gauge): 16-Gauge
•Maximum Lift Of Beam: 2-1/4 Inch
•Bending Length Capacity: 96 Inch
•Beam Adjustment (in./Front To Rear): 1
•Maximum Box Depth: 4
•Finger Nose Angle: 45 Degrees
•Number And Width Of Fingers: 5 at 3", 6 at 4", 9
at 5", 2 at 6"
•Finger Nose Radius: 1/32 Inch
•Wide assortment of finger widths allow greater
versatility in the shop
•Both the bed and apron are bored in to assure
the utmost accuracy
Jet 752102 is a 16-Gauge Bench Box and Pan Brake.
All body sections are welded steel plate with
heavy truss rods and braces designed to give
greater strength and durability.
|
|
| Ad # 15114 | Straight Apron Brakes |
| — |
Roper Whitney |
816 |
Good |
sold |
Photo /
More Info. |
| 8ft x 16ga: Roper Whitney 816 straight hand brake
capacity: 8ft x 16ga mild steel |
|
| Ad # 15112 | Straight Apron Brakes |
| — |
Tennsmith |
816 |
Good |
sold |
Photo /
More Info. |
| 8ft x 16ga straight brake: Tennsmith 8ft x 16ga straight hand brake
capacity: 8ft x 16ga mild steel |
|
| Ad # 15108 | Straight Apron Brakes |
| 1982? |
Roper Whitney |
812 |
Good |
sold |
Photo /
More Info. |
| 8ft x 12ga: Roper Whitney 8ft x 12 ga straight brake
capacity: 8ft x 12 ga mild steel |
|
| Ad # 8216 | Straight Apron Brakes |
| 2004 |
Tennsmith |
HB97-12 |
Very Good |
Sold |
Photo /
More Info. |
| 8ft straight brake 12 Ga.: 8ft /97 inches bend length
2-1/4" max beam lift height
min reverse bend 1/4"
front to rear beam adj. 1/2"
min flange in capacity material 1"
|
|
| Ad # 9178 | Straight Apron Brakes |
| 2007 |
Tennsmith |
HB97-16 |
Very Good |
sold |
Photo /
More Info. |
| 8 ft x 16Ga. : 8 ft / 97 inch bend length
16 Ga. capacity
1-7/8 max beam lift height
1/2" beam adj front to rear
min reverse bend: 1/4"
min flange cap: 1 inch
mounted on caster - not included !!! |
|
| Ad # 8146 | Press Brakes (Mechanical) |
| 70's ? |
Chicago-Dries & Krump |
12ft bed x 200? ton |
Good |
sold |
Photo /
More Info. |
| 12ft bed x 200+? tons: 12ft bed , 126" between housings
8" throat
no back gage
v-dies included 2" & 3" die opening |
|
| Ad # 8144 | Finger Brakes-Box & Pan Brakes |
| ?? |
Metalstar |
10ft x 12 ga. |
Very Good |
Sold |
Photo /
More Info. |
| 10 ft.Heavy duty Box & Pan Brake: 10 ft bed
12 Ga. or heavier capacity ?
fingers look good |
|
We found 9 matching ads. Now displaying the remaining 9 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8082 | Slip Rolls (Manual & Mechanicaly Operated) |
| 90's |
Roper Whitney |
10 ft. |
Very Good |
Sold |
Photo /
More Info. |
| 10ft roll length : 10ft length
3" dia. rolls
rools on great condition
center supports added |
|
| Ad # 9828 | Roll Formers |
| 1983/4 |
Torin |
1668 |
Good |
sold |
Photo /
More Info. |
| —: 2 --Torin Mdl. 1668 Rolling Mills s/n 160232-B & s/n 189100-B
w/6"dia. x 1" w/Face Roll 0.045" To 0.081 dia.
w/6"dia. x 15/16" w/Face Roll 0.045" To 0.081 dia.
Material 40-250 FPM
One Unit Fully Rebuilt Three Years Ago
New Extra Set of Rolls (See Photos)
Year 1983-1984
|
|
| Ad # 6576 | Initial Pinch & Pyramid Type Plate Bending Rolls |
| — |
Niagra |
— |
Good |
SOLD |
Photo /
More Info. |
| 6 ft x 16GA: 6 ft rolls with x 16ga
4" diameter rolls |
|
| Ad # 8568 | Slip Rolls (Manual & Mechanicaly Operated) |
| 2007 |
GMC |
PSR-5016 |
Excellent |
sold |
Photo /
More Info. |
| 50" x 16Ga.: heavy duty frame W/ stand roll around
5/16", 3/8", 1/2" wire grooves
1" roll opening
quick release top
ground rolls
forward/reverse switch
safety foot switch
Spec:
50" x 16 ga mild steel
50" x 20ga stainless steel
50" x 22Ga. min thickness
3" roll dia
|
|
| Ad # 14669 | Initial Pinch & Pyramid Type Plate Bending Rolls |
| 2008 |
built-rite |
MP2.187 |
Excellent |
sold |
Photo /
More Info. |
| 24" x 3/16": New Dimensions/Built-rite initial pinch plate
rolls #MP2.187
Capacity" 24" x 3/16" rated at A36 60,00
tensile steel
3 driven rolls
5" roll dia
initial pinch type
very nice..like new
|
|
| Ad # 9492 | Roll Formers |
| — |
Dahlstrom |
250-80.B.0 |
Very Good |
sold |
Photo /
More Info. |
| Sheet roll former-.25 capacity: 0.25 capacity
1" shaft
Roll Dia-2-1/2-3-1/4"
4" roll spacing
60-180FPM
1-1/2 HP |
|
| Ad # 2922 | Slip Rolls (Manual & Mechanicaly Operated) |
| 50's |
— |
8-12 |
Needs Work |
Sold |
No Photo /
More Info. |
| 8' x 12 Ga Heavy duty manual slip roll: 8' x 12 Ga Capacity
Large 5" dia. rolls
cast base
2' long crank handle |
|
| Ad # 13947 | Initial Pinch & Pyramid Type Plate Bending Rolls |
| 1991 |
Webb |
BR 608 |
Good |
sold |
Photo /
More Info. |
| 96"( 8ft) x 1/8" powered rolls: Webb Industries-powered initial Pinch rolls
metal bending rolls 1/8" X 96" capacity.
Roll Dia:6"
will roll:7" dia min in 12ga-3/16",with a 3/16" @12" dia,18" dia 3ft in 3/16"
roll speed: 16ft/min
capacity:96" x 12ga max, 1/4" x 25",3/16" 34",8ga x 52"
Machine can bend thicker metal based on width for example 1/4" X 5' can also be rolled.
Has power back roll and air powered drop end. machine is in excellent condition.
You can see it run and I can load |
|
| Ad # 11848 | Angle Bending Rolls |
| 2006 |
Eagle |
CPD 80 |
Excellent |
sold |
Photo /
More Info. |
| CPD-80 3” Pipe / Angle : CNC bender: EAGLE CPD-80
3" x 3" x 3/8" Angle
DOUBLE PINCH HYDRAULIC ANGLE BENDING ROLL
Angle, Leg Out - 3" x 3" x 3/8" Angle @ 40"
Angle, Leg In - 3" x 3" x 5/16" Angle @ 40"
Pipe, Schedule 40 - 3" @ 48"
Flats, Hard Way - 3.5" x 5/8" @ 32"
Flats, Easy Way - 5" x 1" @ 26"
Dual LED Display w/ memory to monitor lower roll positions
Rugged, rigid, one piece heavy steel weldment body,
20% heavier than some competitive models. Innovative modular design is stress relieved &
precision machined
Large, high strength steel shafts, heat treated and ground, journaled in dual self aligning
Spherical roller bearingswith forced lubrication for optimum performance, and efficiency.
Main Shafts are 15% larger than nearestcompetitive model, heavier duty, higher capacity
Independent hydraulic adjustment of both lower rolls, w/ long stroke for double pre-bending
All 3 rolls driven by radial piston hydraulic motor and high torque planetary speed reducer
group and planetary gear final drive
Multi axis lateral guides, adjustable in all 3 planes forbending angle iron leg-in or out
Universal bending rolls with modular telescopingcomponents, hardened and wear resistant
Forced lubrication providing full security underharsh working conditions
Machine operates in both vertical and horizontal positions, lifting rings included
Satellite mobile control desk with pushbuttons and programmable digital readouts with
auto repeat control on both rolls affords maximum operator mobility as well as precision
repeatability.
Controls in low voltage 24V with multi-point safety systems
Dual LED Display w/ memory to monitor lower roll positions
Rugged, rigid, one piece heavy steel weldment body,
20% heavier than some competitive models. Innovative modular design is stress relieved &
precision machined
Large, high strength steel shafts, heat treated and ground, journaled in dual self aligning
Spherical roller bearingswith forced lubrication for optimum performance, and efficiency.
Main Shafts are 15% larger than nearestcompetitive model, heavier duty, higher capacity
Independent hydraulic adjustment of both lower rolls, w/ long stroke for double pre-bending
All 3 rolls driven by radial piston hydraulic motor and high torque planetary speed reducer
group and planetary gear final drive
Multi axis lateral guides, adjustable in all 3 planes forbending angle iron leg-in or out
Universal bending rolls with modular telescopingcomponents, hardened and wear resistant
Forced lubrication providing full security underharsh working conditions
Machine operates in both vertical and horizontal positions, lifting rings included
Satellite mobile control desk with pushbuttons and programmable digital readouts with
auto repeat control on both rolls affords maximum operator mobility as well as precision
repeatability.
Controls in low voltage 24V with multi-point safety systems
EAGLE CPD Series Benders are HEAVYWEIGHT, High Capacity Double Pinch Hydraulic Universal Section and Angle Rolls with Premium Features. Both our CPD100 and CPD80 are standard with efficient hydraulic powered rotation, 3 Driven Rolls, Programmable Dual LED Readouts, fully Universal Modular Telescoping Tooling, 6 Way Lateral Guides, Horizontal/Vertical Operation and a host of other beneficial features.
CPD 80 & 100 with Single Speed Rotation. LED w/ 40 program + 40 position Automatic Repeat Controls
We achieve the highest level of versatility by coupling the double pinch design with longer travel on the lower rolls. This permitsoptimum pre-bending while offering a wider maximum roll opening for larger material cross sections. Longer, Larger Shafts and large roll diameters further increase the machines profile range. No other machine compares.
CPD Main Frames are made from solid heavy steel plate, fabricated into Single Piece Weldments, which are then Stress Relieved and CNC Machined. This design Eliminates Frame Torque and evenly distributes bending stress for maximum machine life. We use No Castings in our machine frames.
Alloy Steel Hardened & Ground Shafts are journaled in Multiple Race Dual Tapered Roller Bearings for low maintenance and efficiency. Universal Modular Telescoping Tooling arranges rapidly and easily on the roll shafts to bend most all standard profile cross sections. All 3 shafts are driven for maximum traction. Tooling components are smooth surfaced, non-marring and Induction Hardened to 55 HRC for durability.
Heavy Duty Lateral Material Guides are adjustable in all 3 planes and are used to guide, induce pitch for coils or prevent inherent twist of some materials when rolling. Cam rollers are supplied for rolling angle leg-in.
Both lower bending roll positions are monitored by large, high brightness LED Digital Displays. Lower rolls can be positioned automatically using our MPR-80 Auto Position Repeat Controls with 400 position memory. Controls are Large Format Type, easy to use and protected by moisture and dustproof industrial polycarbonate overlays.
Additional Unmatched Benefits include Dual Foot Pedal Controls for left/right – forward/reverse rolling with steel protective covers, flexible ‘Anti-Pinch’ mill Scale Covers, Concealed Oil Lines on lower bending roll cylinders, Dual Emergency Stop Buttons(1 on machine + 1 on console), Safe 24VAC Control Voltage, completely Flush Mounted Electrical Panels are safe out of harms way, Easy Access Panels to reach hydraulics and internal parts, Safety Limit Switches on top machine cover, Mobile Control Consoles to allows safe operator distance from the work-piece and SAE/DIN Modular Hydraulics with Overload Protection. We use Top Name OEM Components that are nonproprietary and available worldwide
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 9201 | Turret Punch Presses-CNC |
| 1993 |
Strippit |
FC1000R -Fabri-center |
Very Good |
sold |
Photo /
More Info. |
| Fabri center-20 ton: Please verify std. specs below
TOOLING: 20 STATION STRIPPIT STYLE THIN
AUTO INDEX: 3
THICKNESS: .250 MILD STEEL
CAPACITY: 23 TONS .250" MILD STEEL - 1.169" DIA.
.074" MILD STEEL - 3.500" DIA
GAGE POSITIONING ACCURACY: +-.004
AXIS TRAVEL: 51.2" x 40.37"
NOMINAL WORKPIECE SIZE: 49.2" x 39.37"
RECOMMENDED MAXIMUM: 98.4 x 78.74" NOTE: REQUIRES PROGRESSIVE MOVE, SHEET FLIP
AND ADDITIONAL SHEET SUPPORT
MAXIMUM WORKPIECE WEIGHT: 205 Lbs.
TRAVERSE SPEED: 2000 IPM
3 AUTO INDEX STATIONS
CONTROL: STRIPPIT PC CONTROL--MAC
HYDRAULIC CLUTCH AND BRAKE
Has Manuals..
APPROX DIMENSIONS 157"L x 140" W x 87" High
APPROX WEIGHT 25,000 LBS
|
|
We found 36 matching ads. Now displaying the remaining 36 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 11731 | Plate & Bending Rolls: Initial Pinch/Plate |
| — |
unknown |
— |
Fair |
sold |
Photo /
More Info. |
| plate roll 8ft x 10 ga ?: 8ft x 10GA ?? mechanical rolls
6" roll dia
foot pedal control
7 HP
very heavy duty
made by a brand name mfg. but cant read
tag ...was
military surplus machine
needs some tlc but could be upgraded easily |
|
| Ad # 13651 | Benders & Swagers: Pipe and Tube |
| 1997 |
Wallace Coast |
Mandrel Bender HRB 1.5 |
Good |
sold |
Photo /
More Info. |
| UP TO 1-1/2" SCHEDULE 80 STEEL PIPE, MAXIMUM BEND UP TO 125 DEGREES: 1997 Wallace Coast Mandrel Bender HRB 1.5
CAPACITY UP TO 1-1/2" SCHEDULE 80 STEEL PIPE
MAXIMUM BEND UP TO 125 DEGREES
INSIDE BENDING RADIUS 2", 3" OR 4"
EQUIPPED WITH:
- BEND ANGLE CONTROL WITH DRO
- MANDREL SUPPORT BEAM FOR 20' LOAD LENGTH
- MISC. TOOLING DIES 2" - 15" Radius, 1-1/4 & 1-1/2 & 1-1/4 Pipe Dies with Mandrel extractor
Note: Loadiing Fee $500.00 |
|
| Ad # 15631 | Forming & Shaping: Shrinker, Stretchers, English Wheels and Power Hammers |
| — |
chicago pneumatic |
CP-524-12 |
Good |
sold |
Photo /
More Info. |
| 12" throat: chicago pneumatic #CP-524-12-pneumatic planishing hammer
12" throat
3000 blows per min..
lots of dies as shown
uses std proline dies
more info at
at:http://www.hammerfab.com/page/page-12/ |
|
| Ad # 15876 | Brakes Press: Hydraulic |
| 2015 |
Eastern Tool |
EHB-14012 |
Excellent |
sold |
Photo /
More Info. |
| 13ft x 170 ton: 2015 Eastern #EHB-14012 Hydraulic press brake
Bed Length:13ft,157.5"/4000mm bed
Tonnage:170 tons force,1250KN
single axis back gage w/display with manual up down adjustment
lower 4 way V die -several grooves
European style tooling
Note: machine was used less than 40 hrs,owner passed away only bent aluminum boat parts |
|
| Ad # 15625 | Roll Formers: Angle/Profile Bending Rolls |
| 2004 |
Eagle |
CP40 |
Good |
sold |
Photo /
More Info. |
| Flats 4 " / Tube 2-3/4" / Angle 2": Eagle CP40H Angle
/profile roll
w/twisting attachment
and tooling shown
std mfg specs
below -please verify
actual machine
Eagle CP40 Series
Roll Bender
Flats 4 " / Tube
2-3/4" / Angle 2"
Rugged, Versatile
and Highly Cost
Effective.
The Model CP40 is
one of the most used
Section Bender (angle
roll) in the world.
It is equipped with
LED digital display
to monitor the
bending roll and aid
in precise
positioning for
greater accuracy in
rolling. The unit
uses the Powerful
Pyramid Geometry with
lower rolls driven
and fixed in position
and the top roll
adjustable to obtain
different bending
diameters. Universal
tooling supplied in
18 components permit
bending of most all
standard sections.
STANDARD FEATURES
LED Digital
Display to monitor
top roll position
Shafts Heat
Treated and precision
and precision ground
Hardened
Universal Rolls, New
Design more versatile
Rugged Steel
Heads, No Castings!
2.5 HP Bi-
directional TEFC
Motor
3 Way
Adjustable Lateral
Guides
All shafts
Journaled in dual
high load roller
bearings
Automatic Top
Roll Locking Pin for
EASY tooling change
out
Higher
Rolling Speed &
Heavier Machine
Weights
Low Voltage
Controls
Thermal Motor
Overload Protection
Mobile
Control Station w/ 40
memory presets
Unit operates
in Vertical &
Horizontal Positions
CAPACITY CHART
MATERIAL
CP-40M/40H/40H2
Flats, Hard 2-1/4 x
3/8 Ø 20"
Flats, Easy 4 x 5/8
Ø 16"
Square Bar 1-3/8 Ø
20"
Angle, Leg-out 2 x
1/4 Ø 24"
Angle, Leg-in 2 x
1/4 Ø 28"
Tee, Leg-out 2-1/2
Ø 24 "
Tee, Leg-in 2 Ø 24"
C, Leg-out 3 Ø 24"
C, Leg-in 3Ø 30"
Round Bar 1-3/8 Ø
20"
Pipe, Sch. 40 2 Ø
40"
Round Tube 2-3/4 x
14 ga Ø 60"
Square Tube 2 x 1/8
Ø 48"
Rect. Tube:2-1/4 x
1-1/2 x 1/8
Bending
Adjustment:M-H-H2
Driven rolls:H=3,
M=2, H2=2
Rolling speed
fpm:14
Working
plane:Vertical/Horizo
ntal
Repeat control:Auto
Repeat
Installed power
HP:3.8
Approx.
dimensions:28 x 38 x
54h
Approx. Shipping
wt. lbs.:1450
note:digital read
out does not seem to
display any useful
information.
|
|
| Ad # 15623 | Brakes Press: Hydraulic |
| ? |
Toyokoki co. |
HYB-125 /12540 |
Good |
sold |
Photo /
More Info. |
| 137 US tons ton x 13ft bed: Toyokoki Hyd. Press Brake # HYB-125/12540
Tonnage: 137US tons:(125metric Ton) x 13 ft bed
Control:Tokoki-TNC Hybrid Servo up to 11 axis capability,color display,100 programs storage,crown conpensation,2d bend simulation,floppy disc,rs232,die graphics,teaching
throat:16"
stroke:7.8"
auto crowning
programmable backgage 4 axis plus ?confirm
made in japan quality
tooling type : Euro style..not included
Note: no tooling included
std mfg specs below-please verify actual machine
Capacity:125 metric tons(137 US tons)
length of bed: 4 meters (157.5")
bed width: 5.9"
stroke:7.8"
frame gap: 16"
manual pulse bending for hemming and coining
back gage: BGL,BGR,up/down,stppers L,R,LL,RR,aoto crowning AC1,AC2
back gage range:R axis:4"
Z axis:118"
|
|
| Ad # 14317 | Hole Punches: Single,Turret and CNC |
| 1294 |
Wiedemann |
R41-P |
Good |
sold |
Photo /
More Info. |
| mechinal turret punch press-24 stations:15 ton: Wiedemann mechanical turret punch press-hole
punch machine # R41P
15 ton force
28" throat depth
20 stations
3-1/8" max punch dia
stroke counter
Punch capacity: 14ga mtl steel or 3/4" hole in
1/4" steel,27/32" dia in 1/4",1-3/16" in
3/16",2" dia in 1/8",3-1/8" in 0.089 mtl
electric stop/back gage built into table
ram stroke: 1-1/16"
clearance between dies & strippers: 7/16"
strokes per min: 100
1HP main motor
single stroke clutch system
see link below for complete manual info:
http://www.sterlingmachinery.com/db-
files/Wiedemann%20Turret%20Punch%20Press%20R-
41P%20and%20R-44%20Brochure.pdf |
|
| Ad # 12727 | Hole Punches: Single,Turret and CNC |
| 60s |
Diacra |
No 2 |
Excellent |
sold | | |
