Year:
|
|
Make:
| Rotex
|
Model:
| 20C-3.50
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: | We can load
|
Weight: | 900
|
Dimension: L x W x H | 3 x 4 x 6 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Rotex 20C-3.50 manual hole punch
20C 3.5
Specifications: 20 stations 26" throat depth 3 1/2" maximum hole punching capacity Rated at 15 tons Alphabet indicators align the punch and die station Tooling set includes: #30, #12, 7/32, 1/4, 9/32, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4, 7/8, 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2-1/2, 2-5/8, 3-1/28**
Totally redesigned turrets on our basic 18-C frame increases the punching capacity to 3-1/2" and 20 stations. This machine has been very popular in the automotive racing industry, aircraft facilities, shipyards and truck plants As a result of over 75 years in manufacturing Turret Punch Presses, the Rotex Turret Punch Press is an efficient, versatile, and easily operated machine tool. Compared with recognized methods of handling small quantity production and short run punching jobs, only a fraction of the time and labor is required when a Rotex Turret Punch is used. As a labor and time saver, Rotex Punch Presses are confidently recommended for a very wide range of applications. For most job shops, a variety of punches must be quickly available. In order to utilize this added feature of irregular shaped punches, it is required that the machine be keyed to provide precision aligning of the dies and punches. This feature is standard on all models.
The Turrets rotate to the desired punching size instantly and lock into position. The dies and punches are accurately pre-aligned and self locking to insure maximum precision. A safety lock prevents damage to the work, punches, and dies, if the machine is properly aligned. Different sizes and shapes are available instantly with the rotating of the turrets. No time is lost in setting up. The machine is always ready to operate. Once installed, it is unnecessary to realign punches with dies. The turret and dies plate can be rotated independently thereby increasing the versatility of the machine. The stations on the punch turret and die plate are marked alphabetically. The punch holders or punches, and dies are marked according to size. The "Quick Change" feature of the Rotex punch enables the operator to bring into punching position quickly and efficiently any of the sizes or shapes offered. Rotex offers a greater depth of throat, a greater selection of sizes and shapes, a larger maximum size, 3-1/2", all incorporated in one machine at one time and for less money than all other makes~ "It's a Tool Center."
Throat:26" throat depth. Will punch to the center of a 48" sheet of material with a fence being utilized.
Frame:Cast "Mehanite" or equivalent 60,000 PSI tensile or better for rugged operation.
Turret Rotation:Independent handle rotation is the standard configuration. Optional "Hand Synchronized" (HS) or "Hand Wheel Gear Synchronized" (HWGS) are also available.
Tonnage:Punch Presses are rated at approximately 13 tons with an average sized operator.
Tooling:Long wearing hardened steel, machined to close tolerances for efficient punching. Pre-aligned and ready for immediate use to insure maximum precision.
Station Indicators:Punch and Die turrets are alphabetically marked to simplify accurate and speedy alignment.
Safety Lock:Prevents damage to work and machine if the turrets are not properly locked in place.
Size Identification:Punch and die sizes are clearly marked for quick and proper identification. roll around stand included as shown
Includes roll around stand shown..
new this unit sells new for 18K without stand...
|
|