| Year:
| 2005
|
| Make:
| Ras
|
| Model:
| Flexbend 73.40
|
| Condition:
| Demo Machine
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
South Dakota
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- RAS FLEXIbend Metal Folding System
Model:RAS FLEXIbend 73.40
Maximum Forming Capacity at Full Length
mild steel, tensile 55,000 psi12 gauge
aluminum1/8”
Maximum Length of Forming 159"
Smallest Permissible Inner Bend Radius, (Full Width) 1.25 x gauge
Minimum Flange Height 6 x gauge
Clamping Beam Maximum Speed Up 1.58"/sec
Clamping Beam Maximum Speed down 1.58"/sec
Maximum Folding Speed 90°/sec
Folding Angle Setting Range0-180°
CNC Folding Beam Stroke 3.15"
CNC Lower Beam Stroke3.15"
Clamping Beam Stroke11.81"
Backgauge Positioning Accuracy+/-.004"
Backgauge Maximum Positioning Time2 sec
Backgauge Minimum Position.394"
Backgauge Maximum Position (standard)61"
Backgauge Maximum Position (w/J-shape)159"
ELECTRICAL SPECIFICATIONS
220/440 60 cy 3ph (transformer included)
Amperage: 30 amps
Ambient temperatures of more than +40 degrees C (104 F) may require a special execution
Motor Drive Power: 5.5 HP
Control:
§Touch & More Control
§DNC communication software for a PC with RS232C interface
§Front footswitch movable on rail
§Rear footswitch and keyswitch (one switch front, one switch rear)
§CNC folding beam adjustment for varying sheet thicknesses
§CNC lower beam adjustments for perfect radii
§Picture-based icon programs
§Speed optimizer
Backgauge:
§Integrated CNC backgauge and sheet support system
§Ten finger stops (range .39” to 61”)
§Adjustable stainless steel sheet support panels with ballcasters
§One short sheet support with ballcasters for rear operation (575mm wide x 1200 mm long) 22.6” x 47.2
§Rectangular adjustable angle squaring gauge 67" long
§J-shaped backgauge 159” long with two additional backgauge finge
Tooling:
§16 sections of 7.87" long segmented goat's foot tooling 6.10" tall (126” total)
§2 adapter sets of goat's foot tooling to include the following (24.8” total):
(2-30mm, 2-35mm, 2-40mm,
2-45mm, 2-50mm, 2-55mm, and
2-60mm)
§2 corner pieces (one right/one left) (9.4” total)
§Segmented folding beam tool set .984" wide (up to 12 gauge)
§Segmented folding beam tool set .472” wide (up to 16 gauge)
§Segmented lower beam tool set 1.575" high for down flanges
§Automatic upper beam tool clamping system
§Automatic folding beam tool clamping system
§Integrated folding beam crowning system
§Tool cart
§CNC Crowning
ADDITIONAL OPTIONS AVAILABLE FOR FLEXIBEND:Non purchased with machine-verify
1.Execution with second front footswitch for working with two operators and keyswitch
(required by safety regulations when working with two operators in front)$1,265
2.Movable footswitch on rail – two operator$980
3.3.15" tall rear-free goat's foot tooling (7.87" long)$595 ea
– Adapter set of 3.15" tools$2,255 ea
– Corner pieces$640 ea
4.6.10" tall rear-free goat's foot tooling (7.87" long)$810 ea
– Adapter set of 3.15" tools$2,905 ea
– Corner pieces$670 ea
5.10 basic segments of sharp tooling (15.75")$670/ea
6.Sharp tooling 60mm (2.36”)$185/ea
7.U-shaped backgauge 159” long with ballcasters$7,020
(addition to the standard J-shape)
8.Offline Software$1,880
|
| Electrical Description |
|
|
| Comments: |
- was 175K new, only 802 power on hrs..
|
|
