|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 2006 Make - Calypso Model - Hammerhead |
|---|
| FOR SALE: Ad # 15718 , Year = 2006 , Make = Calypso , Model = Hammerhead | 
|
|
Category: Water Jet
|
Capacity: 4 x 4 table
|
| Ad #
15718 |
| Year:
| 2006
|
| Make:
| Calypso
|
| Model:
| Hammerhead
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Not Under Power
|
| Shipping Info: | We can load
|
| Weight: | 6000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Florida
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- 2006 Calypso CNC water jet.
American made..
table :4ft x 4ft
It was purchased in February of 2016
for
those just in-case scenarios. It was in
a government facility and was OVERLY
maintained as it has a TOTAL OF 500 HOURS ON
IT!!!!!
It has a KMT 30k (S30) pump and the high
pressure
cylinders (if you know anything about
water its) have never even been removed. This
unitshows like brand new.
cost new ($169,000.00 NEW)
4’ X 4’ Waterjet Cutting System with
Calypso PC Based CNC Controller, KMT 30HP 60KPSI
Intensifier Style Pump, Up To 1,500 IPM Cutting
Speeds, 800 LB Bulk Abrasive Feeder,
Programmable Z-Axis, Sealed Control Cabinet,
Sealed Waterproof Keyboard and Closed Loop AC
for Control Cabinet and with only 500 Operating
Hours this system is in “As-New” condition!
std mfg specs below-please verify actual
machines
GENERAL FEATURES:
Bridge Gantry X-Y table on Uniframe – Full 5
Feet X 5 Feet Work Area
Fully Sealed Bellow System
Servo Controlled Z axis, with Auto Tool Lift
and Nudge Jog
Abrasive Cutting Head
30 HP Intensifier Pump – 60,000 PSI
Operating Pressure
Control Console – Industrially Hardened
PC Computer with Windows OS
Calypso’s Exclusive Software Suite – from
Drawing to Part
Abrasive Bulk Hopper
Digital Abrasive Metering system
“Rain Gutter” helps provide clean work area
GENERAL SPCIFICATIONS
Actual X axis travel (Bridge travel or
width):49”
Actual Y axis travel (depth):49”
Z Axis Travel:6” to top of bed
Table Width:67.5” between side frames
Table Depth:55”
DRIVE SYSTEM AND GUIDEWAY SYSTEM
Bridge Gantry Driven From Both Sides
Machine Squareness Maintained Electronically
4-Axis
True Closed Loop Servo Drive System – Loop
Is Closed Back to the Controller
Brushless Servo Motors
Precision Rack and Pinion Drive
System/planetary Low Backlash Gearheads
Speed Range (standard): .1 To 500 IPM
Standard
Straight Water Cutting Speeds: Up To 1500
Ipm
Recirculating Ball Bearing Runner Blocks On
Hardened Precision Ground Ways.
360° Bellows Seal All Motion Components From
Abrasive Invasion
ABRASIVE SYSTEM
Bulk abrasive Hopper: The system includes a
completely integrated Bulk Transfer Vessel, with
reinforced flexible transfer hose. The system
uses shop compressed air, and can be placed to
either side of the cutting table, and has a
maximum capacity of 800 lbs.
Digital Abrasive Control (DAC): Digitally
commanded from the PC Control system, DAC
provides precise metering and control at the
cutting head. The system is computer controlled,
the desired abrasive flow rate can be quickly
changed at the PC control.
CONTROL SYSTEM:
Calypso’s exclusive control software is the
easiest to use in the industry, and
provides multiple options that improve
cutting control, as well as including costing,
array nesting, and other features that are
“extra” on other waterjet systems.
Control Console: Calypso systems utilize a
roll around, industrially hardened console that
contains the PC computer; control electronics
and servo drive
hardware. The PC utilizes the current
standard in PC processor speed and hard drives
and Windows OS. The system includes a Ethernet
card and external sealed Ethernet port. The
console has an external 4-port USB hub to accept
memory sticks.
Exterior cables plug directly to military
grade connectors on the main control circuit
board and operator buttons reside on the front
panel board.
HIGH PRESSURE SYSTEM:
The system utilizes a 30HP 60KPSI
Intensifier Style Pump Manufactured Exclusively
for Calypso by KMT Waterjet System. This pump is
fully integrated to the operating system and
controller of the machine and features:
(1874) 2006 Calypso Hammerhead 55 Waterjet
Cutting System - Pic 18.jpg
Dual Pressure Control for automatic
High/Low cycling of pressure.
Long slow stroke intensifier for
extended seal life.
Ceramic plungers for increased plunger
life.
Cartridge quick-change hydraulic seal
design.
Long seal life design.
High efficiency Heat Exchanger
Quiet operation
INCLUDES: Calypso PC Based CNC Controller,
KMT 30HP 60KPSI Intensifier Style Pump, Up To
1,500 IPM Cutting Speeds, 800 LB Bulk Abrasive
Feeder, Programmable Z-Axis, Sealed Control
Cabinet, Sealed Waterproof Keyboard and Closed
Loop AC for Control Cabinet and with only 500
Operating Hours this system is in “As-New”
condition!
we purchased a larger Calypso Water
Jet new in 2006 and know this machine inside and
out! We
run our larger water jet every day and
wouldn't even consider a different brand. we
would be willing to throw in some training
and/or help
in the future as he has been working with
the same software as on this new unit for
12 years now.
We are able to load onto a trailer or
flat bed. No serious rigging needed (BIG
$AVING$)
due to its size/weight.
|
|
|
|
| Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
