Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 8595 | Press Brakes (Hydraulic) |
|
HTC |
890-G |
Fair |
Sold |
Photo /
More Info. |
90 Ton: Model: 890-G / SN: 670266B
Rated 10' x 10ga
100" between housings
15hp 3ph
$14,900 Plus Brokerage Fee or Best Offer
(716)627-5908 Tues. thru Sat. 9-5 EST |
|
Ad # 7575 | Press Brakes (Hydraulic) |
|
HTC |
150G |
Very Good |
Sold |
Photo /
More Info. |
150 TON X 12' HTC HYDRAULIC PRESS BRAKE: 150 TON X 12' HTC HYDRAULIC PRESS BRAKE
CAPACITY ................................. 150 TON
OVERALL LENGTH OF BED & RAM .............. 12'
DISTANCE BETWEEN HOUSINGS ................ 126-1/2´´
STROKE OF RAM ............................ 7´´
OPEN HEIGHT .............................. 12-1/2´´
CLOSED HEIGHT ............................ 5-1/2´´
DEPTH OF THROAT .......................... 8´´
RAM SPEED RAPID APPROACH ................. 60 IPM
RAM SPEED PRESS .......................... 40 IPM
RAM SPEED FAST RETURN .................... 120 IPM
FRONT OPERATED BACK GAUGE ................ HURCO
ELECTRIC FOOT TRIP ....................... YES
FLOOR STANDING ........................... YES
MOTOR .................................... 20 HORSEPOWER |
|
Ad # 6445 | Press Brakes (Hydraulic) |
|
Atek Bantam |
B212 |
Excellent |
Sold |
No Photo /
More Info. |
12 Ton x 24" Bed Hydraulic Press Brake: LIKE NEW. Used very little. Has the stand and dies. This will fit in a pic... |
|
Ad # 5088 | Press Brakes (Hydraulic) |
|
Amada |
RG-25 |
Very Good |
SOLD |
Photo /
More Info. |
25 Ton Hydraulic Press Brake: SPECIFICATIONS
TONNAGE -------------------------- 25 TONS
TABLE LENGTH --------------------- 47.3"
MAXIMUM BEND LENGTH -------------- 49.3"
DISTANCE BETWEEN UPRIGHTS -------- 40.2"
THROAT DEPTH --------------------- 7.88"
LENGTH OF STROKE ----------------- 3.94"
OPEN HEIGHT ---------------------- 14.58"
POWER REQUIREMENTS --------------- 3 KVA, 230 VOLT/3 PHASE
HYDRAULIC OIL RESERVOIR ---------- 6.86 GALLONS
WEIGHT (APPROX.) ----------------- 3,100 LBS.
CONTROL -------------------------- D-9 NC, S/N# FN66546
--------------------------------------------------------------------------------
EQUIPPED WITH
- CNC BACKGAUGE
|
|
Ad # 3116 | Press Brakes (Hydraulic) |
|
LVD |
165 BH |
|
sold |
Photo /
More Info. |
LVD CNC Press Brake Model 165 BH: 217" Bending length
New in 1985 (currently in plant under power)
Distance between side frames: 148"
40" Horn on right side
Distance between bed and ram: 13.8" Max
Stroke of ram: 5.9" max., Adjustment of ram 4.7"
Depth of gap in side frame: 9.8"
Motor 18 Hp, 230/460 3 phase
Slot and pit required for bed
Back gauge range increased from 24" to 40" at time of purchase Work lifting system Equipped with: Axis X1, X2, R, Z1, Z2, U, V, Alpha-numeric keyboard, tape recorder, programmable speed |
|
Ad # 11152 | Press Brakes (Hydraulic) |
|
Niagra |
HBM-135-10-12 |
Good |
sold |
Photo /
More Info. |
135 Ton x 144" bed: 135 Ton
144" bed length
8" stroke
15" open height
120" between housings
2 axis cnc back gage
no tooling included |
|
Ad # 12836 | Press Brakes (Hydraulic) |
|
Roto-Die |
10 |
Good |
sold |
Photo /
More Info. |
10' Brake: 10' Hydralic Roto-Die
Model 10
Voltage 220/440
Phase:3
Bending Capacity 120" x 16 gauge
72" x 10 gauge*
Motor 7-1/2 HP
Length of Stroke 3"
Strokes / Minute 20 to 50
Die Clearance 2-1/8"
Die Space 7-1/2"
Overall Dimensions -
Length 12' 1"
Front to Back 22"
Height 5' 3-1/2"
|
|
Ad # 14036 | Press Brakes (Hydraulic) |
? |
Bantam |
B 412 |
Good |
sold |
Photo /
More Info. |
4ft. x 12 ton 18 gauge mild steel: Bantam Press Brake (Pneumatic)
Model: B 412
Capacity: 4ft x 12 Ton
Tooling Space (in.)8-7/8
Ram Stroke (in.)0 - 1-7/8
Bed Adjustment (in.)2
Throat Depth (in.)5-3/4
Shut Height (in.)7-1/2
Bed and Ram Thick (in.)1-1/4
Ram Height (in.)9-7/8
Bed Width (in.)48
Between Housings (in.)48-1/4
Back Gauge Depth (in.)0 - 18
Maximum Free Air (ft³)2.2
Maximum Speed @ Full Stroke (SPM)30
Tooling pictured included
Users Manual Included |
|
Ad # 11076 | Press Brakes (Hydraulic) |
|
Cincinnati |
2 - 30 |
Very Good |
sold |
Photo /
More Info. |
6 ft -- 30 TON : SERIAL ............................ 28621
MODEL ............................. 2-30
CAPACITY .......................... 30 TON
OVERALL LENGTH OF BED AND RAM ..... 72"
DISTANCE BETWEEN HOUSINGS ......... 62"
STROKE OF RAM ..................... 2-1/2"
POWER RAM ADJUSTMENT .............. 4"
DIE SPACE, SDAU ................... 12"
DEPTH OF THROAT ................... 9"
POWER RAM ADJUSTMENT .............. YES
ELECTRIC FOOT PEDAL ............... YES
BACK GAUGE ........................ 24" MANUAL
DRIVE MOTOR, HORSEPOWER ........... 3
|
|
Ad # 14415 | Press Brakes (Hydraulic) |
? |
Roto Die |
10 |
Good |
sold |
Photo /
More Info. |
10ft. x 16 Gauge: Roto Die Hydraulic Press Brake
Model: 10
Capacity: 10ft. x 16 Gauge
6ft. x 10 Gauge
Electrical: 230/3 phase
Motor7-1/2 HP
Length of Stroke....3"
Strokes / Minute....20 to 50
Die Clearance.......2-1/8"
Die Space...........7-1/2"
1 - No. 37 Roto-Die with:
7º cross-braking groove
85º die opening 3/8” wide
85º die opening 7/8” wide
30º die opening 1/2” wide
Roto-Die hydraulic press brake is equipped
with
depth-of-stroke adjustment with indicators,
length-of-stroke adjustment. |
|
Ad # 14928 | Press Brakes (Hydraulic) |
? |
Bantam Brake |
B212 |
Good |
sold |
Photo /
More Info. |
12 ton x 24" Pneumatic : Bantam Brake # B212 pneumatic press brake
press brakes offer versatility and
economy. This machine is a conveniently sized 2
foot 12 ton model. They perform numerous
prototyping and production press brake functions
including bending, flanging, hemming, flattening,
staking, box forming and more. Each machine uses
standard American-style, 5150 steel press brake
tooling. A 90 deg top punch and 3/4 inch bottom
vee die included.
Additional features include adjustable
stroke depth control, adjustable die spacing,
tamper proof speed control valve, complete modular
FRL unit with OSHA lockout, and a variable tonnage
control. No need to worry about wiring, simply
connect an air line. The conditioned air supply,
standard, gives years of trouble fee service. Buy
a press brake Made in America by experienced
craftsmen
Adjustable Stroke Depth Control is
provided by the screw stop for precise
repeatability. Raise the adjustable bed and
shorten the ram stroke to maximixe productivity
while reducing air consumption and minimizing the
pinch point for safer operation.
Adjustable Die Space handles numerous
tool sets and reduces or eliminates the pinch
point. Per OSHA guidelines, a die space gap of 1/4
inch or less is not a pinch point and provides the
safest operation method. Loosen the bed and raise
or lower it with the large bed elevating screws.
Leveling of bed to ram is easily accomplished
using this feature
Ram Speed Control via an infinitely
variable valve allows instant adjustment of air
flow to the dual cylinders. A minimum setting
creates a creep mode for setup, or select any
other position to safely match ram speed with your
job.
Safety Hooded Foot Pedal controls all ram
motion. Fully depress control pedal for down
stroke. Slightly release pedal to stop advancing
the ram. Completely release pedal at any time and
the counter-balanced ram automatically retracts to
the top of the stroke. For added safety, the ram
retracts if air supply is removed.
Modular FRL Unit is standard on all models
to condition air supply to pneumatic components
for long life. The unit consists of an adjustable
filter/regulator module with pressure gauge,
adjustable flow lubricator module and a three-way
lockable shut-off valve. The valve is vented to
relieve downstream pressure in the off position
per OSHA guidelines. Keyed padlock and lockout tag
are included.
Variable Tonnage Control provided through
the modular filter/regulator/lubricator unit
delivers twelve or twenty-four tons of ram force
to form up to 3/8 or 1/2 inch at maximum pressure.
Lower the pressure to suit the job, reduce air
consumption and preserve tooling.
Type: pneumatic
•Capacity: 12 ton
•Working Length (inches): 24
•Strokes: 30 strokes per minute
•Air Pressure (psi): 90
•Weight (pounds): 940
•Dimensions (LxWxH): 32 x 40 x 25
12 tons at 85 PSI, max 110psi
24" width
22" between housings
foot pedal actuated
1-3/4" stroke
14" manual back gage
5" throat
note: tooling shown included |
|
Ad # 9257 | Press Brakes (Hydraulic) |
|
Pacific |
200Ton x 12 ft |
Fair |
sold |
Photo /
More Info. |
200 ton 12 ft. bed: distance between housing-125"
12ft. bed
200 ton cap.variable
24" manualback gage
(includes lower die riser)
some tooling-verify ??
|
|
Ad # 8289 | Press Brakes (Hydraulic) |
|
Rousselle |
POL 5025 |
Good |
sold |
Photo /
More Info. |
55 Ton x 10 ft Rousselle Hydraulic Press Brake: USED 10' x 14 GAUGE ROUSSELLE HYDRAULIC BRAKE
Tonnage Capacity:55 Tons
Bending Capacities:
10' x 14 Ga. Mild Steel
8' x 12 Ga. Mild Steel
Overall Length Of Bed & Ram:10'
Distance Between Housings:100"
Stroke:4"
Open Height:10"
Closed Height:6"
Throat Depth:9"
Width Of Bed:5-1/4"
Floor To Top Of Bed:32-3/4"
Speeds Approx: 2"/Sec. - Approach
.4"/Sec. - Press
3"/Sec. - Return
EQUIPPED WITH:
Electric Foot Switch
2-3/4" High Four Way Die Rail
Key Selector Switch For Manual-Off-
Auto & Emergency Stop Button
Stroke Length Adjustment
Pushbutton For Upstroke
Sectional Ram Die Clamps
Dovetail Slots In Front & Back
Of Bed
Hydraulic Pump Driven By 5.5 HP
1700 RPM 220/440/3/60 Motor
|
|
Ad # 8279 | Press Brakes (Hydraulic) |
|
HTC |
200G |
Good |
Sold |
Photo /
More Info. |
200 Ton HTC, 12 ft HTC Hydraulic Press Brake: USED 12 FT. X 1/4" HTC HYDRAULIC BRAKEModel No. 200G
Bending capacity:12' x 1/4" mild steel
Tonnage capacity:200 tons
Overall length of bed & ram:12'
Distance between housings:10'5"
Stroke:7"
Open height:12-1/2"
Closed height:5-1/2"
Throat depth: 8"
Width of bed:5-5/16"
Speeds approx.:1"/Sec. - approach
.5"/Sec. - Press
1-1/4"/Sec. - return
EQUIPPED WITH:
36" Front operated manual micrometer
back gauge with vertical adjustment
Dual pushbuttons for operation
with emergency stop button
3-1/4" High die rail
Micrometer depth stop
Hydraulic pressure gauge
Bed & ram machined for angle-
front & back
Selector switch for normal-hold
Sectional ram die clamps
Pressure gauge
Hydraulic pump driven by
20 HP 1750 RPM 230/460/3/60 Motor
|
|
Ad # 9691 | Press Brakes (Hydraulic) |
|
|
homemade |
Good |
sold |
Photo /
More Info. |
Horiz: press brake: 12" length-V die
can bend-1"
dies incl.
includes loading on your truck |
|
Ad # 11584 | Press Brakes (Hydraulic) |
|
custom built |
|
Good |
sold |
Photo /
More Info. |
200 ton ..30ft: 18 hydraulic cylinders...9 and 9 on each actuator panel...4 sets of dyes ... |
|
Ad # 13109 | Press Brakes (Hydraulic) |
|
HTC |
200-12H |
Good |
sold |
Photo /
More Info. |
12ft 200 Ton 5/16" x 10ft: HTC Press Brake
200 Ton 12 Ft
10Ft between the sides.
No tooling and No back gauge.
Machine is in great condition has been refurbished. |
|
Ad # 6406 | Press Brakes (Hydraulic) |
|
CINCINNATI |
300 X 14 |
Very Good |
Sold |
Photo /
More Info. |
300 TON X 14' CINCINNATI HYDRAULIC PRESS BRAKE: 300 TON X 14' CINCINNATI HYDRAULIC PRESS BRAKE
CAPACITY ........................... 300 TON
OVERALL LENGTH OF BED & RAM ........ 14'
DISTANCE BETWEEN THE HOUSINGS ...... 12'6´´
STROKE ............................. 12´´
OPEN HEIGHT ........................ 22´´
CLOSED HEIGHT ...................... 10´´
THROAT ............................. 11´´
RAM SPEED FAST PRESS ............... 77 IPM
RAM SPEED FULL TONNAGE PRESS ....... 37 IPM
RAM SPEEDS RETURN .................. 80 IPM
MILLED & DRILLED FOR ANGLES ........ YES
ELECTRIC FOOT TRIP ................. YES
MOTOR .............................. 40 HORSEPOWER |
|
Ad # 11405 | Press Brakes (Hydraulic) |
|
Roto-Die |
#10 |
Good |
sold |
Photo /
More Info. |
16ga 10f1: 16 ga. x 10' Max
Includes 1 dies
Forming die 270 deg. |
|
Ad # 13696 | Press Brakes (Hydraulic) |
? |
Diacro |
16-72 |
Good |
sold |
Photo /
More Info. |
25 Ton x 72": Diacro Hydra Power Press Brake
Model: 16-72
CNC Diacro Back Gauge
Length of Bed 72"
Distance between housings 62"
Capacity in mild steel (6') 16 ga.
Stroke 2"
Ram Adjustment 3"
Throat clearance 9"
Horsepower 3hp
Floor space 44" X 72" X 92" high
Weight 5,000 lbs
|
|
Ad # 15251 | Press Brakes (Hydraulic) |
|
chicago |
|
Good |
sold |
Photo /
More Info. |
15 ton x 48": chicago 15 ton x 40" hyd press brake
light curtain
dies in machine |
|
Ad # 14051 | Press Brakes (Hydraulic) |
|
|
|
Good |
sold |
Photo /
More Info. |
75 Ton 10Ft: 75 Ton
10Ft bed |
|
Ad # 1277 | Press Brakes (Hydraulic) |
|
Niagra |
IB36-5-6 |
Good |
Sold |
Photo /
More Info. |
55 Ton Press Brake x 6': 35 ton middle, 55 ton bottom, 2-1/2" stroke, 4" adjustable ram,12" shut hei... |
|
Ad # 8291 | Press Brakes (Hydraulic) |
|
Ajial |
502 M |
Good |
sold |
Photo /
More Info. |
50 Ton x 7 ft Hydraulic Press Brake: 7 FT. X 12 GA. AJIAL HYDRAULIC PRESS BRAKE
Tonnage Capacity:50 Tons
Bending Capacity:7" x 12 GA Mild Steel
Overall Length of Bed & Ram:84"
Distance Between Housings:80"
Stroke:3.9"
Open Height:11.8"
Throat Depth:15.7"
Width of Bed:3.9"
Floor To Top Of Bed:32 3/4"
Speeds Approx:1.9"/Sec. - Approach
.29"/Sec. - Press
1.8"/Sec. - Return
Equipped With:
Electric Foot Switch
3" High Die Rail
Sectional Ram Die Clamps
Selector Switch For Start - Stop
Speed Adjustment Control
Tonnage Control With Pressure Gauge
Emergency Stop Button
Hydraulic Pump Driven By
5 1/2 HP 1700 RPM 440/3/60 Motor
|
|
Ad # 6885 | Press Brakes (Hydraulic) |
|
Wysong |
168-22 |
Good |
SOLD |
Photo /
More Info. |
14 foot x 22 GA.wysong air/hydraulic brake-Heavy Duty: 14 foot x 22GA. Wysong Air/Hydraulic Break. Out of business sale. Break is ... |
|
Ad # 10534 | Press Brakes (Hydraulic) |
|
Bentenbender |
8' x 70 ton |
Very Good |
Sold |
Photo /
More Info. |
Remanufactured Betenbender 8' x 70 Ton Press Brake: All New Electrical including 10HP Motor, Footswitch, Enclosure & Switch Bra... |
|
Ad # 4544 | Press Brakes (Hydraulic) |
???? |
Pacific |
J-70 |
Very Good |
Sold |
Photo /
More Info. |
70 TON 10 FT. X 12 GA. PACIFIC HYDRAULIC PRESS BRAK: 70 Ton, Pacific hyd., 10' OA, 8'4" BH, 10' x 12 ga.
Bending Capacities: 10' x 12 Ga. Mild Steel
6' x 10 Ga. Mild Steel
Tonnage Capacity: 70 Tons
Overall Length of Bed & Ram:10'
Distance Between Housings:8'3-1/2"
Stroke: 7"
Open Height: 14"
Closed Height: 7"
Throat Depth: 6"
Width of Bed: 3-1/4"
Floor to Top of Bed: 32"
Speeds Approx.: 105"/Min. Advance
45"/Min. Press
105"/Min. Return
EQUIPPED WITH: 3" High Die Rail
Dual Electric Foot Switches
Pushbutton For Start - Stop
Stroke Length & Ram Tilt Adj.
Sectional Ram Die Clamps
Toggle Switch For Cycle - Inch -
Off - On
Vickers Hydraulic Pump
Driven by 15 HP 1455 RPM
380/3/50 Motor |
|
Ad # 8423 | Press Brakes (Hydraulic) |
|
Pacific |
300-10 |
Good |
sold |
Photo /
More Info. |
300 TON x 10ft hyd press brake: CAPACITY: 300 TONS
RAM & BED OVERALL LENGTH: 10'0"
DISTANCE BETWEEN HOUSINGS: 8'4-1/2"
WIDTH OF BED: 8"
THROAT DEPTH: 10"
STROKE: 12"
OPEN HEIGHT: 20"
CLOSED HEIGHT: 8"
BED PROJECTION BELOW FLOOR: 18"
BED HEIGHT ABOVE FLOOR: 32"
MOTOR: 30 HP
pit required for front base
EQUIPPED WITH:
top V Die 8ft?? verify
TONNAGE CONTROL & INDICATOR
2-SPEED POWER UNIT
FOOT PEDAL
OAD: 10'4" L-R X 6'8" F-B X 10'0" HIGH (ABOVE FLOOR)
APPROXIMATE WEIGHT: 32,500 |
|
Ad # 8274 | Press Brakes (Hydraulic) |
|
PACIFIC |
200-12 |
Good |
Sold |
Photo /
More Info. |
200 Ton Pacific, 12' OA, 10'5" BH, 10' x 1/4" Hydraulic Shear: Bending Capacities:
10' x 1/4" Mild Steel
8' x 5/16" Mild Steel
6' x 3/8" Mild Steel
Tonnage Capacity: 200 Tons
Overall Length Of Bed & Ram: 12'
Distance Between Housings: 10'5"
Stroke: 12"
Open Height: 17"
Closed Height: 5"
Throat Depth: 8"
Width Of Bed: 8"
Floor To Top Of Bed: 51"
Speeds Approx:
31"/Min. Normal Press
62"/Min. Return
Equipped With:
Electric Foot Switch
4" High Four Way Die Rail
Pushbuttons For Start-Stop
Stroke Length & Tilt Adjustment
Micrometer Depth Stop
Sectional Ram Die Clamps
Dovetail Slots In Front & Back Of Bed
Hydraulic Pump Driven By 25 HP 1800 RPM 220/440/3/60 Motor
|
|
Ad # 3144 | Press Brakes (Hydraulic) |
|
Pacific |
J55 |
|
Sold |
Photo /
More Info. |
Pacific J55 CNC Press Brake: 55 Ton Capacity
8' Bed and Ram Length
Automatic CNC Back Gauge |
|
Ad # 9153 | Press Brakes (Hydraulic) |
|
Dries & Krump |
150P10 Pacemaker |
Good |
Sold |
Photo /
More Info. |
12ft overall, 126 between housings x 3/16 ...150 ton: 12 FT. X 3/16" 150 Ton
DREIS & KRUMP HYDRAULIC PRESS BRAKE
Model no. 150P10 Pacemaker
Bending capacities: 12' x 3/16" mild steel
8' x 1/4" mild steel
5' x 3/8" mild steel
Tonnage capacity: 150 tons
Overall length of bed & ram: 12'
Distance between housings: 126"
Stroke: 8"
Ram adjustment: 6"
Shut height S.D.A.U.: 12"
Throat depth: 8"
Width of bed: 6"
Floor to top of bed: 35"
Speeds approx: 322"/minute - advance
41"/minute - press
230"/minute - return
EQUIPPED WITH: 24" front operated manual back gauge
via hand lever with readout and
vertical adjustment
5-1/2" high die rail
Electric foot switch
Dual palm buttons for run
Emergency stop button
Stroke length adjustment
Power ram adjustment with pu Pushbuttons for start - stop
Key selector switches for forward -
reverse; hi - stop - lo use bypass
Sectional ram die clamps
Bijur one shot oil lubrication
1/2 HP 1725 RPM 230/460/3/60 ram
adjustment motor
Hydraulic pump driven by
25 HP 1800 RPM 230/460/3/60 motor
Weight approx. 22,200#
Overall dimensions approx. 146" L-R x 62" F-B X 118" H
|
|
Ad # 12864 | Press Brakes (Hydraulic) |
|
Allsteel |
135-10 |
Good |
sold |
Photo /
More Info. |
135 x 10ft: Allsteel 135--10 hyd press brake
Automec CNC99B 2 Axis Backgauge
135 ton x 10 ft
This brake comes with some tooling |
|
Ad # 5827 | Press Brakes (Hydraulic) |
|
DIACRO |
16-72 |
Very Good |
Sold |
Photo /
More Info. |
72" x 16 Ga. 25 Ton Diacro Hydra-Mechanical Press Brake: LENGTH OF BED 72”
CLEARANCE BETWEEN HOUSING 62”
CAPACITY MILD STEEL 16 GA
STROKE OF RAM 2”
RAM ADJUSTMENT 3”
SHUT HEIGHT 9”
DIE HOLDER HEIGHT 3”
THROAT CLEARANCE 9”
EQUIPPED WITH:
NEW SEALS IN HYDRAULICS
NEW BEARINGS
POWER RAM ADJUSTMENT
FRONT OPERATED MANUAL BACK GAUGE
STROKE ADJUSTMENT
NEW PAINT |
|
Ad # 8287 | Press Brakes (Hydraulic) |
70's? |
Pacific |
J-75 |
Good |
sold |
Photo /
More Info. |
75 Tons x 10 ft Pacific Hydraulic Press Brake: USED 10 FT. X 12 GA. PACIFIC HYDRAULIC PRESS
Tonnage Capacity:75 Tons
Bending Capacities:11' x 12 Ga. Mild Steel
8' x 10 Ga. Mild Steel
6' x 3/16" Mild Steel
Overall Length of Bed & Ram:12'
Distance Between Housings:10'2 3/4"
Stroke:7"
Open Height:13"
Closed Height:6"
Throat Depth:12"
Width of Bed:5-1/2"
Floor to Top of Bed:33"
Speeds Approx.:
178"/Min. Rapid Advance
79"/Min. Normal Press
12"/Min. Anti Whip
142"/Min. Rapid Return
EQUIPPED WITH:
Electric Foot Switch
Selector Switch For Single Cont.
Stroke Length Adjustment
Ram Tilt Adjustment
Sectional Ram Die Clamps
Pushbuttons For Start Stop
T Slots in Front & Back of Bed
Hydraulic Power Unit Driven by
15 HP 1455 RPM 425/3/50 Motor |
|
Ad # 9161 | Press Brakes (Hydraulic) |
80's |
BSI |
6 x 95 Ton |
Good |
SOLD |
Photo /
More Info. |
95 Tons x 6 ft: 6 ft x 95 ton
New Hydraulic system |
|
Ad # 11568 | Press Brakes (Hydraulic) |
80s? |
Hydra Tool |
100-10H |
Very Good |
sold |
Photo /
More Info. |
100 Ton 10 ft brake: HTC
Model 100-10H
100 Ton
10ft Throat 9" Distance between sides 8"
Hurco Backstop (needs service) |
|
Ad # 10533 | Press Brakes (Hydraulic) |
80's |
Bentenbender |
BSI 6' x 95 ton |
Very Good |
sold |
Photo /
More Info. |
Betenbender/BSI 6' x 95 Ton PRESS BRAKE: All New Electrical including 15HP Motor, Footswitch, Enclosure & Switch Bra... |
|
Ad # 8081 | Press Brakes (Hydraulic) |
85?? |
Pacific |
J-series # J110-14 |
Good |
Sold |
Photo /
More Info. |
110ton 14 ft bed Hydraulic press brake: 110 Ton
14 ft bed length, 150" between housing
8" throat
4 way v die, 1/2?, 5/8", flat Vees
no back gauge
capacity rated at 12 ft x 10Ga(1/8") mild steel |
|
Ad # 8290 | Press Brakes (Hydraulic) |
85 ?? |
Donewell |
H55-2500 |
Good |
Sold |
Photo /
More Info. |
55 Ton x 8 ft Hydraulic Press Brake with CNC Back Gauge: USED 6 FT. X 10 GA. DONEWELL HYDRAULIC CNC PRESS BRAKE
Capacity: 55 tons
Bending capacities:
8' x 12 ga. mild steel
6' x 10 ga. mild steel
4' x 3/16" mild steel
Overall length of bed & ram:98"
Distance between housings:80"
Stroke:4"
Open height:12-1/2"
Closed height:8-1/2"
Throat depth:10"
Width of bed:4"
Floor to top of bed:35"
Speeds approx.:4"/Sec. - approach
3/8"/Sec. - bend
2"/Sec. - return
EQUIPPED WITH:
24" Donewell model "CNC3300 PS" two axis programmable back gauge with control
Free standing control with dual
Palm buttons for run & emergency
Stop button
1" High die rail
Pushbuttons for start-stop
Sectional ram die clamps
Hydraulic pump driven by 5-1/2" HP motor |
|
Ad # 10055 | Press Brakes (Hydraulic) |
86?? |
Hydra-Tool Co:HTC |
200-12H |
Good |
sold |
Photo /
More Info. |
200 Ton x 12 ft: 200 Ton x 12 ft bed
124-1/2" between housings
8.5" throat
stroke counter
foot pedal
lube system-manual
lots of dies:1-2" opening-liitle rusty but will clean up ok-bead blast..
stroke adj.
24" power back gage
|
|
Ad # 8590 | Press Brakes (Hydraulic) |
90 |
BANTAM |
B412 |
Good |
sold |
No Photo /
More Info. |
4FT. 12 TON: 4 ft x 12 ton
IR 1 AND 3/4 STROKE |
|
Ad # 995 | Press Brakes (Hydraulic) |
90's |
custom |
40 Ton |
Needs Work |
Sold |
Photo /
More Info. |
Small Press Brake 40 Ton x 42": 42" bed
tee-slotted table;
hyd. unit,
foot switch;
fingers in top rail
2 avaiable
some tooling shown |
|
Ad # 9751 | Press Brakes (Hydraulic) |
90's ? |
Wysong |
PH-6072 |
Very Good |
sold |
Photo /
More Info. |
60 Ton x 6ft bed w/ cnc back gage: 6 ft bed
62.5" between housings
max die space 15"
6" stroke
approx.30" back gage
light curtain
foot pedal
2 axis cnc back gage-ram and depth height has manual hand wheels
lots of tooling included-shown
Capacities:
12'-9" x 14ga(.075)
9ft x 12ga(.105)
7ft x 10GA (.135)
5ft x 7ga(.179)
|
|
Ad # 9480 | Press Brakes (Hydraulic) |
95/96 |
Accupress |
717512 |
Very Good |
SOLD |
Photo /
More Info. |
175 Ton x12'bed--will bend 12ft x 1/4" steel: Std. specs below please verify..
Capacity .................................. 175 Tons
Length of Bed ............................. 12'
Distance Between Frames ................... 124"
Bed Height ................................ 34"
Bed Width ................................. 5.5"
Ram Stroke ................................ 8"
Open Height ............................... 14"
Closed Height ............................. 6"
Throat Depth .............................. 10"
Fast Approach ............................. 90 ipm
Slow Bend ................................. 24 ipm
Fast Return ............................... 180 ipm
Motor ..................................... 20 HP
Equipped With: please verify below
Advantage Press Brake Package-verify
adjustable Bend Speed
Groove in bed
Back Gage
Overall Dimensions: 168" L x 55" W x 88" H
Overall Weight (approx.): 24,000 lbs.
CNC 99 Autobackgauge-2 axis. Unit
Was used to bend light gauge material
has tooling
can be powered up.
Unit was aquired in business purchase along with Wysong shear (see other listing) |
|
Ad # 8420 | Press Brakes (Hydraulic) |
1960 |
CHICAGO DRIES & KRUMP |
200HV10 |
Good |
sold |
Photo /
More Info. |
200 Ton: BENDING CAPACITY:1/4" X 10'
BEN & RAM OVERALL LENGTH:174"
DISTANCE BETWEEN HOUSINGS:124"
THROAT DEPTH:8"
STROKE:12"
OPEN HEIGHT:17"
CLOSED HEIGHT:5"
NO PIT REQUIRED
SPEEDS:ADVANCE 135"/ MIN
PRESSING 30"/ MIN
RETURN:145"/ MIN
MOTOR:(2)15 HP 1800 RPM
FRAME: 284U, 3 PAHAE, 60 CYC.220/440 VOLT
DOUBLE END HYDRAULIC PUMP MOTOR
EQUIPPED WITH:
24" HORN - RIGHT SIDE
FULL LENGTH SECTIONAL RAM DIE CLAMPS
FULL LENGTH T-SLOTTED BED
FOOT PEDAL CONTROL
no back gage
|
|
Ad # 14212 | Press Brakes (Hydraulic) |
1960 |
Chicago |
SB 103 |
Fair |
sold |
Photo /
More Info. |
10ft. x 20 Gauge or 5ft. x 18 Gauge: Chicago Hydraulic Press Brake
Model: SB 103
Capacity:
10ft. x 20 Gauge (5/8")
5ft. x 18 Gauge
25 Strokes per min
2" Stroke
|
|
Ad # 5496 | Press Brakes (Hydraulic) |
1963 |
PACIFIC |
150-12 |
Good |
SOLD |
Photo /
More Info. |
150 TON, 12' PACIFIC HYDRAULIC PRESS BRAKE: CAPACITY -------------------------- 150 TONS
OVERALL LENGTH OF BED & RAM --------------- 12'
DISTANCE BETWEEN HOUSINGS ----------------- 8'5"
BENDING CAPACITY, MILD STEEL ---------- 10' 3/16"
STROKE OF RAM ----------------------------- 10"
OPEN HEIGHT ------------------------------- 15"
CLOSED HEIGHT ----------------------------- 5"
THROAT DEPTH ------------------------------ 6-3/4"
PIT REQUIRED FOR BED EXTENSION
BELOW FLOOR --- ( L x W x D ) ----- 10" X 2" X 16"
MAIN DRIVE MOTOR ------------------- 15 HP A.C.
OVERALL HEIGHT ---------------------------- 104"
( EXCLUDING 16" BELOW FLOOR SECTION )
EQUIPPED WITH:
UPPER DIE CLAMPS
LOWER DIE CLAMP
ELECTRIC CONTROL PEDAL
TONNAGE CONTROL
REMOVABLE RAM AND BED ANGLES |
|
Ad # 8880 | Press Brakes (Hydraulic) |
1965 |
Pacific |
400-14 |
Good |
Sold |
Photo /
More Info. |
400 Tons: Bending Capacity 14' x 3/8" Mild Steel
10'x 1/2" Mild Steel
7' x 5/8" Mild Steel
Tonnage Capacity 400 Tons
Overall Length of Bed and Ram 14'
Distance Between Housings 12'4.5"
Stroke 12"
Open Height 20"
Closed Height 8"
Throat Depth 10"
Width of Bed 10"
Floor to Top of Bed 32"
Speeds Approximate 140"/Min. Advance
65"/Min. Press
131"/Min. Return
Equipped With 24" Hurco "Autobend 7" 2-Post
Programmable Back Gauge
Vertical Adjustment
Stroke Length, Tilt Adjustment, Tonnage Control
Micrometer Depth Stop
Pushbuttons for Start-Stop
Selector Switch for Inch-Run
Ram Machined for Angles-Front/Back
Sectional Ram Die Clamps
Vickers Hydraulic Pump
Driven by 40 HP 1770 rpm
34" Pit Required
|
|
Ad # 5003 | Press Brakes (Hydraulic) |
1966 |
DIACRO |
#16-96 |
Good |
Sold |
Photo /
More Info. |
35-Ton DIACRO #16-96 Hydra-Mechanical Press Brake, S/N-660117465, Used: Hurco IV CNC back gauge
Manual Shut Height Adjust.
Adjustable Stroke
Die Rail 2-1/2" x 3" Hight x 8' |
|
Ad # 12969 | Press Brakes (Hydraulic) |
1969 |
Pacific |
400-17 |
Good |
sold |
Photo /
More Info. |
400 ton:breaking capacity 3/8" x 19': Pacific Hydraulic Brake 14ft x 3/8"
Year-1969
Model-400-17
400 ton capacity
1.5" horn on one end to make 19' overall
Breaking Capacity-full length-3/8" x 19'
between housings 14ft-4"
Several Extra smaller Dies
4 Way Die bottom included plus shorter dies
included
Accu Bend Computer (Not Pictured)
CNC Back Stop back stop(Not Pictured)
Voltage-220/440 3 Phase
|
|
Ad # 8080 | Press Brakes (Hydraulic) |
1970 |
Promecam |
RG35-20 |
Very Good |
Sold |
Photo /
More Info. |
35 Ton -80" bed length: 35 Ton unit W/ tonnage control
80" overall bed length, 66" between housings
8" throat
bottom acting-pushes up on bed
dual palm buttons
12" back gage
|
|
Ad # 15235 | Press Brakes (Hydraulic) |
1972 |
Promecam |
C100-876/RG3000-100 |
Good |
sold |
Photo /
More Info. |
10ft x 100ton: Promecam #C100-876/RG3000-100 hyd.Press brake
bottom acting-ram moves up-great feature
bed length:10ft
16" throat depth
stroke:6",w/12" opening
front support arms (2) 36"
inside housing dimensions:8'4"
easy to use programmable back gage
100ton max capacity w/tonnage control programmable back gage:Autogage CNC 300
lots of tooling-shown over 10k worth |
|
Ad # 10537 | Press Brakes (Hydraulic) |
1973 ? |
Cincinatti |
CB135 |
Good |
sold |
Photo /
More Info. |
135 Ton, 10 ft. OAL: Machine includes bottom die block and misc operating
tools.
no tooling included
Machine capacity is 8 ft. between housings, 10 ft.
overall length of bed. the Hurco back gauge needs to
be fixed but all componants are in place. Good
rugged machine. |
|
Ad # 5495 | Press Brakes (Hydraulic) |
1974 |
DIACRO |
16-96 |
Good |
SOLD |
Photo /
More Info. |
35 TON, 8' DIACRO HYDRA-MECHANICAL PRESS BRAKE: LENGTH OF BED & RAM ----------------------- 96"
DISTANCE BETWEEN HOUSINGS ----------------- 62"
CAPACITY -------- ( MILD STEEL ) ---- 96" X 16 GA.
STROKE OF RAM ----------------------------- 2"
SHUT HEIGHT RAM UP, STROKE DOWN ----------- 9"
RAM ADJUSTMENT ---------------------------- 3"
THROAT CLEARANCE FROM CENTER OF DIES ------ 9"
MAIN DRIVE MOTOR ------------------- 3 HP A.C.
EQUIPPED WITH ---
HURCO AUTOBEND IV CNC BACK GAUGE WITH 24" RANGE
STROKE ADJUSTMENT
COMPLETE HYDRAULIC SYSTEM
LOWER & TOP DIE HOLDERS
FOOT PEDAL CONTROL |
|
Ad # 6400 | Press Brakes (Hydraulic) |
1974 |
PEXTO LVD |
BH12 |
Very Good |
SOLD |
Photo /
More Info. |
110 TON X 13' PEXTO LVD HYDRAULIC PRESS BRAKE: 110 TON X 13' PEXTO LVD HYDRAULIC PRESS BRAKE
CAPACITY .................................. 110 TON
OVERALL LENGTH OF BED & RAM ............... 157´´
DISTANCE BETWEEN HOUSING .................. 120´´
STROKE OF RAM ............................. 6´´
OPEN HEIGHT ............................... 13-3/4´´
CLOSED HEIGHT ............................. 7-3/4´´
DEPTH OF THROAT ........................... 9-3/4´´
RAM SPEED ADVANCED ........................ 240 IPM
RAM SPEED PRESSING ........................ 24 IPM
RAM SPEED RETURN .......................... 140 IPM
ELECTRIC FOOT TRIP ........................ YES
MOTOR ..................................... 15 HORSEPOWER |
|
Ad # 7573 | Press Brakes (Hydraulic) |
1976 |
PACIFIC |
70-6 |
Good |
Sold |
Photo /
More Info. |
70 TON X 6' PACIFIC HYDRAULIC PRESS BRAKE With CNC Back Gauge: 70 TON X 6' PACIFIC HYDRAULIC PRESS BRAKE
CAPACITY ................................. 70 TON
OVERALL LENGTH OF BED & RAM .............. 72´´
DISTANCE BETWEEN HOUSINGS ................ 51-1/2´´
STROKE OF RAM ............................ 8´´
OPEN HEIGHT .............................. 15´´
CLOSED HEIGHT ............................ 7´´
DEPTH OF THROAT .......................... 6´´
AUTO GAUGE CNC BACK GAGE MODEL ........... 1000
ELECTRIC FOOT TRIP ....................... YES
MILLED & DRILLED FOR ANGLES .............. YES
MOTOR .................................... 12-1/2 HORSEPOWER |
|
Ad # 5746 | Press Brakes (Hydraulic) |
1977 |
CINCINNATI |
Series 135 CB x 8' |
Very Good |
Sold |
Photo /
More Info. |
135 Ton CINCINNATI Series 135 CB x 8’ Hydraulic Press Brake, with 2-ax: Flush floor design
Capacity at bottom 135 Tons
Overall length of bed and ram 10"
Distance between housings 8' 6"
Max. stroke 8"
Throat depth 7"
Die space 12"
|
|
Ad # 8876 | Press Brakes (Hydraulic) |
1977 |
Pacific |
K350-22 |
Good |
sold |
Photo /
More Info. |
350 Tons: Hydraulic Press Brake (Gauge)
Tonnage 350
Bending Length 22'
Distance Between Hoursings 20'-5"
Stroke 12"
Throat Depth 16"
Open Height 20"
Closed Height 8"
3 Speed RAM
Motor 30HP
Pit for Bed 49"
Equipped With 4 Way Die Set
Tonnage Indicator
Electric Foot Switch
Voltage 460
|
|
Ad # 5489 | Press Brakes (Hydraulic) |
1977 |
DIACRO |
55-10 |
Good |
Sold |
Photo /
More Info. |
55 TON DIACRO HYDRA-MECHANICAL PRESS BRAKE: LENGTH OF BED & RAM ----------------------- 120"
DISTANCE BETWEEN HOUSINGS ----------------- 102"
CAPACITY ----- ( MILD STEEL ) ------ 120" X 14 GA.
STROKE OF RAM ----------------------------- 3"
SHUT HEIGHT RAM UP, STROKE DOWN ----------- 12"
RAM ADJUSTMENT ---------------------------- 4"
THROAT CLEARANCE FROM CENTER OF DIES ------ 8"
MAIN DRIVE MOTOR ------------- 10 HP 230/460/3/60
EQUIPPED WITH ---
24" CNC BACK GAUGE ( 1 AXIS )
STROKE ADJUSTMENT
COMPLETE HYDRAULIC SYSTEM
LOWER & TOP DIE HOLDERS
FOOT PEDAL CONTROL |
|
Ad # 12850 | Press Brakes (Hydraulic) |
1979 |
Pacific |
|
Good |
sold |
Photo /
More Info. |
150: Pacific Press brake
very good condition
manual back ga front op, depth of stroke controls
10ftx 150 ton capacity
fully hydraulic |
|
Ad # 7579 | Press Brakes (Hydraulic) |
1980 |
CINCINNATI |
230CB12 |
Very Good |
Sold |
Photo /
More Info. |
230 TON X 14' CINCINNATI HYDRAULIC PRESS BRAKE With CNC Back Gauge: 230 TON X 14' CINCINNATI HYDRAULIC PRESS BRAKE
CAPACITY ......................... 230 TON
OVERALL LENGTH OF BED AND RAM .... 14'
DISTANCE BETWEEN HOUSING ......... 12'6´´
STROKE OF RAM .................... 10´´
OPEN HEIGHT ...................... 17´´
CLOSED HEIGHT .................... 7´´
DEPTH OF THROAT .................. 8´´
RAM SPEED HIGH ................... 101 IPM
RAM SPEED MEDIUM ................. 49 IPM
RAM SPEEDS LOW ................... 14 IPM
RAM SPEEDS RETURN ................ 95 IPM
HURCO AUTOBEND 20C CNC BACK GAUGE. YES
MILLED & DRILL FOR ANGLES ........ YES
ELECTRIC FOOT TRIP ............... YES
MOTOR ............................ 30 HORSEPOWER |
|
Ad # 14614 | Press Brakes (Hydraulic) |
1981? |
Roto-die |
# 10 |
Good |
sold |
Photo /
More Info. |
10ft x 16ga: Roto Die hyd press brake
10ft x 16ga capacity max
4-way rotatable die in bottom
no back gage
front foot pedal actuation
bend height/angle adj counter
2-upper dies included V & flat for hemmming
rigging/loading approx:$800.00 |
|
Ad # 5756 | Press Brakes (Hydraulic) |
1981 |
LVD |
180-BH-10 |
Very Good |
Sold |
Photo /
More Info. |
165 TON X 10' LVD HYDRAULIC PRESS BRAKE: CAPACITY .......................... 165 TON
OVERALL LENGTH OF BED AND RAM ..... 10'
DISTANCE BETWEEN HOUSINGS ......... 8'6´´
STROKE OF RAM ..................... 6-7/8´´
MAXIMUM DIE SPACE ................. 16-3/4´´
MINIMUM DIE SPACE ................. 9-7/8´´
DEPTH OF THROAT ................... 9-7/8´´
WIDTH OF BED ...................... 7-3/4´´
DUAL PALM BUTTONS/ELECTRIC FOOT TRIP
|
|
Ad # 8883 | Press Brakes (Hydraulic) |
1982 |
Urisviken |
|
Good |
sold |
Photo /
More Info. |
200 Tons: Capacity 200 Tons
Overall Length of Bed and Ram 12' 1 5/8"
Distance Between Housings 124"
Stroke 10"
Open Height 19 5/8"
Throat Depth 7 3/4"
Table Width 7 3/4"
Speeds Fast Approach 78" / Minute
Form 27 " / Minute
Creep Form 2.6" / Minute
Return 75" / Minute
Distance From Floor to Top of Table 31 1/2"
Main Motor 30HP 460/230/3/60
Equipped With Pedestal Palm Button Station
Bolt on Angle Brackets
Vickers Hydraulic Pump
Variable Speed Ram
Variable Tonnage
Bed Face Machined with Dovetail Slots
New Valves, Rebuild Hydraulic Cylinders in Jan
2008
Electrics 460/3/60
Voltage 220/440
|
|
Ad # 5044 | Press Brakes (Hydraulic) |
1982 |
DONWELL |
#17-1300 |
Very Good |
Sold |
Photo /
More Info. |
Hydraulic Press Brake-17 Ton x 4ft-3"in: 17 Ton x 4-3"ft
DRC Single Axis Back Gauge new in 1982
Palm & Foot Control
Includes Die Rail but no dies included
Good. POR Due to DRC in Service.
One Owner Machine.
Tonnage 17-Ton
Overall Bend Lnegth 4' - 3"
Distance Between Hsgs. 41-1/2"
Throat Depth 5-3/4"
Stroke 0>3"
Motor 230/460V/3/60 (wired 460V at present)
With: Palm & Foot Control
Includes Die Rail
|
|
Ad # 8282 | Press Brakes (Hydraulic) |
1982 |
Darley |
EHP.110.31/25 |
Good |
sold |
Photo /
More Info. |
121 Ton x 10 ft Darley Hydraulic Press Brake: USED 10 FT. X 3/16" DARLEY HYDRAULIC PRESS BRAKE
Capacity: 121 tons
Bending Capacities:
122" x 3/16" Mild Steel
8' x 1/4" Mild Steel
Overall Length of Bed & Ram:122"
Distance Between Housings:100.3"
Stroke:5.9"
Open Height:14.7"
Closed Height:4.8"
throat Depth:9.8"
Width of Bed:6.25"
Floor to Top of Bed:35.5"
Speeds Approx.:3.9"/Second - Approach
.30"/Second - Press
2.5"/Second - Return
EQUIPPED WITH:
5.5" High Die Rail
Free Standing Control w/Dual Palm
Buttons For Run - Emergency Stop Button
Electric Foot Switch
Pushbuttons For Start - Stop
Sectional Ram Die Clamps
T-Slots in Front - Back & Top of Bed
Hydraulic Power Unit
Driven by 10 HP Motor
|
|
Ad # 6412 | Press Brakes (Hydraulic) |
1983 |
BERTSCH |
175 x 10 |
Good |
SOLD |
No Photo /
More Info. |
175 TON X 10' BERTSCH HYDRAULIC BRAKE: 175 TON X 10' BERTSCH HYDRAULIC BRAKE:
CAPACITY ......................... 175 TON
OVERALL LENGTH OF BED ............ 10'
DISTANCE BETWEEN HOUSINGS ........ 8'6´´
STROKE ........................... 10´´
OPENING .......................... 17´´ MAXIMUM7´´ MINIMUM
CNC BACKGAUGE .................... YES |
|
Ad # 9154 | Press Brakes (Hydraulic) |
1983 |
Bertsch |
175-12 |
Good |
sold |
Photo /
More Info. |
175 Ton 12 foot: Specifications
Capacity: 175 Tons
Approach ram speeds (in/min): 245/88/29
Return ram speeds (in/min): 225/52
Overall bend length: 12'
Distance between housings: 10'6"
Platen height above floor: 36"
Bed projection below floor: 0"
Stroke length: 10"
Open height: 17"
Closed height: 7"
Throat depth: 8"
Platen width: 8"
Motor: 30 hp
Approximate shipping weight: 24,500 lbs.
Overall dimensions: 150" x 53" x 130"
Equipped With:
PC Ram control
no back gage
In plant under power @ customer's facility
|
|
Ad # 6928 | Press Brakes (Hydraulic) |
1983 |
PACIFIC |
J165-10 |
Very Good |
Sold |
Photo /
More Info. |
PACIFIC MODEL J165-10 HYDRAULIC PRESS BRAKE: PACIFIC MODEL J165-10 HYDRAULIC PRESS BRAKE
Capacity: 165 Ton
Overall Length of Bed & Ram: 10'
Distance Between Housings: 8'6"
Stroke: 10" (Max); Open Height: 32"; Closed Height: 22"
Throat Depth: 7"
Distance Bed to Floor: 35"; Pit Required for Bed: 8" (Approx)
Stroke Length & Speed Change Control; Mode & Speed Selector
Switches
Speeds: 133 IPM Advance; 75 IPM Pressing; 177 IPM Return
Auto Level Control; Auto Decompression System; Overload
Protection
All Steel Frame - Interlocked Construction
EQUIPPED WITH:
Micrometer Fine Tilt Adjustment
30 HP AC Main (Pump) Motor 230/460/3/60 Currently 460
Electrical Controls
Dual Palm Button Operation |
|
Ad # 7669 | Press Brakes (Hydraulic) |
1983 |
NIAGARA |
HD-175-6-8 |
Good |
SOLD |
Photo /
More Info. |
175 TON X 8' NIAGARA MODEL HD-175-6-8 HYDRAULIC PRESS BRAKE: 175 TON X 8' NIAGARA MODEL HD-175-6-8 HYDRAULIC PRESS BRAKE
CAPACITY ............................ 175 TON STROKE .............................. 10´´ OVERALL BED & RAM ................... 96´´ X 24´´
OPEN HEIGHT ......................... 15´´
CLOSED HEIGHT ....................... 5´´
DISTANCE BETWEEN HOUSINGS ........... 6'6´´
PERMANENTLY FLANGED BED & RAM ....... 24´´ WIDE
FULL PRESS CONTROLS ................. YES
AUTOBEND CONTROL - NO BACK GAUGE
FLOOR STANDING |
|
Ad # 9120 | Press Brakes (Hydraulic) |
1984 |
Niagara |
HBM-135-10-12 |
Very Good |
sold |
Photo /
More Info. |
135 Ton 12ft Hyd: Niagara 135 Ton Hydraulic Press Brake 12ft Long 10ft 6" Between Housings Br... |
|
Ad # 6906 | Press Brakes (Hydraulic) |
1984 |
ALLSTEEL |
70-6 |
Very Good |
sold |
Photo /
More Info. |
70 TON X 6' ALLSTEEL HYDRAULIC PRESS BRAKE: 70 TON X 6' ALLSTEEL HYDRAULIC PRESS BRAKE
TONNAGE ......................... 70 TONS
OVERALL LENGTH OF BED & RAM ..... 72´´
DISTANCE BETWEEN HOUSINGS ....... 54´´
CAPACITY ........................ 6 X 3/16´´ MILD STEEL
STROKE .......................... 6´´ MAXIMUM
SHUT HEIGHT (SDAU) .............. 15´´
CLOSED HEIGHT ................... 9´´
THROAT .......................... 8´´
RAM SPEED APPROACH .............. 130 IPM
RAM SPEED PRESSING .............. 60 IPM
RAM SPEED RETURN ................ 130 IPM
FLOOR TO BED .................... 32´´
ELECTRIC FOOT TRIP .............. YES
MOTOR ........................... 20 HORSEPOWER |
|
Ad # 13290 | Press Brakes (Hydraulic) |
1984 |
Brakemaster |
10ft x 150 ton |
Good |
sold |
Photo /
More Info. |
150 ton x 10 ft: Brake Master Hyd. Press brake
Tonnage: 150ton
bed length: 10ft
tonnage/pressure control
light curtain
clamp style manual backgage
no tooling included
brake can not be moved until new unit arrives in
july..but can be inspected |
|
Ad # 13710 | Press Brakes (Hydraulic) |
1985 |
Pirahna |
65ton |
Excellent |
sold |
Photo /
More Info. |
65 ton x 8ft: (1985)
65 ton Piranha Brake
overall bed 8'
between housing 6'-1/2"
inching, jogging
speed control
some tooling
manual back gauge
speed control says 0-100 |
|
Ad # 13221 | Press Brakes (Hydraulic) |
1986 |
Amada |
FBD5020 |
Good |
SOLD |
Photo /
More Info. |
55 ton: (1986)
50 Ton Amada Upacting Press Brake
Model# FBD5020
Table Length: 78.7"
Between Columns: 66.9"
Throat Depth: 15.75"
Stroke: 3.94"
Open Height: 14.57"
3-Axis CNC Backgauge
|
|