Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 12850 | Press Brakes (Hydraulic) |
1979 |
Pacific |
|
Good |
sold |
Photo /
More Info. |
150: Pacific Press brake
very good condition
manual back ga front op, depth of stroke controls
10ftx 150 ton capacity
fully hydraulic |
|
Ad # 8883 | Press Brakes (Hydraulic) |
1982 |
Urisviken |
|
Good |
sold |
Photo /
More Info. |
200 Tons: Capacity 200 Tons
Overall Length of Bed and Ram 12' 1 5/8"
Distance Between Housings 124"
Stroke 10"
Open Height 19 5/8"
Throat Depth 7 3/4"
Table Width 7 3/4"
Speeds Fast Approach 78" / Minute
Form 27 " / Minute
Creep Form 2.6" / Minute
Return 75" / Minute
Distance From Floor to Top of Table 31 1/2"
Main Motor 30HP 460/230/3/60
Equipped With Pedestal Palm Button Station
Bolt on Angle Brackets
Vickers Hydraulic Pump
Variable Speed Ram
Variable Tonnage
Bed Face Machined with Dovetail Slots
New Valves, Rebuild Hydraulic Cylinders in Jan
2008
Electrics 460/3/60
Voltage 220/440
|
|
Ad # 11584 | Press Brakes (Hydraulic) |
|
custom built |
|
Good |
sold |
Photo /
More Info. |
200 ton ..30ft: 18 hydraulic cylinders...9 and 9 on each actuator panel...4 sets of dyes ... |
|
Ad # 15251 | Press Brakes (Hydraulic) |
|
chicago |
|
Good |
sold |
Photo /
More Info. |
15 ton x 48": chicago 15 ton x 40" hyd press brake
light curtain
dies in machine |
|
Ad # 14051 | Press Brakes (Hydraulic) |
|
|
|
Good |
sold |
Photo /
More Info. |
75 Ton 10Ft: 75 Ton
10Ft bed |
|
Ad # 8290 | Press Brakes (Hydraulic) |
85 ?? |
Donewell |
H55-2500 |
Good |
Sold |
Photo /
More Info. |
55 Ton x 8 ft Hydraulic Press Brake with CNC Back Gauge: USED 6 FT. X 10 GA. DONEWELL HYDRAULIC CNC PRESS BRAKE
Capacity: 55 tons
Bending capacities:
8' x 12 ga. mild steel
6' x 10 ga. mild steel
4' x 3/16" mild steel
Overall length of bed & ram:98"
Distance between housings:80"
Stroke:4"
Open height:12-1/2"
Closed height:8-1/2"
Throat depth:10"
Width of bed:4"
Floor to top of bed:35"
Speeds approx.:4"/Sec. - approach
3/8"/Sec. - bend
2"/Sec. - return
EQUIPPED WITH:
24" Donewell model "CNC3300 PS" two axis programmable back gauge with control
Free standing control with dual
Palm buttons for run & emergency
Stop button
1" High die rail
Pushbuttons for start-stop
Sectional ram die clamps
Hydraulic pump driven by 5-1/2" HP motor |
|
Ad # 14614 | Press Brakes (Hydraulic) |
1981? |
Roto-die |
# 10 |
Good |
sold |
Photo /
More Info. |
10ft x 16ga: Roto Die hyd press brake
10ft x 16ga capacity max
4-way rotatable die in bottom
no back gage
front foot pedal actuation
bend height/angle adj counter
2-upper dies included V & flat for hemmming
rigging/loading approx:$800.00 |
|
Ad # 11405 | Press Brakes (Hydraulic) |
|
Roto-Die |
#10 |
Good |
sold |
Photo /
More Info. |
16ga 10f1: 16 ga. x 10' Max
Includes 1 dies
Forming die 270 deg. |
|
Ad # 9119 | Press Brakes (Hydraulic) |
1988 |
FECO Roto Die |
#15 |
Very Good |
Sold |
Photo /
More Info. |
14ga x 10ft Roto Die Hyd : FECO Roto-Die Hydraulic Press Brake 3-Way Full Length Lower Die (1) Set Seg... |
|
Ad # 5003 | Press Brakes (Hydraulic) |
1966 |
DIACRO |
#16-96 |
Good |
Sold |
Photo /
More Info. |
35-Ton DIACRO #16-96 Hydra-Mechanical Press Brake, S/N-660117465, Used: Hurco IV CNC back gauge
Manual Shut Height Adjust.
Adjustable Stroke
Die Rail 2-1/2" x 3" Hight x 8' |
|
Ad # 5044 | Press Brakes (Hydraulic) |
1982 |
DONWELL |
#17-1300 |
Very Good |
Sold |
Photo /
More Info. |
Hydraulic Press Brake-17 Ton x 4ft-3"in: 17 Ton x 4-3"ft
DRC Single Axis Back Gauge new in 1982
Palm & Foot Control
Includes Die Rail but no dies included
Good. POR Due to DRC in Service.
One Owner Machine.
Tonnage 17-Ton
Overall Bend Lnegth 4' - 3"
Distance Between Hsgs. 41-1/2"
Throat Depth 5-3/4"
Stroke 0>3"
Motor 230/460V/3/60 (wired 460V at present)
With: Palm & Foot Control
Includes Die Rail
|
|
Ad # 12836 | Press Brakes (Hydraulic) |
|
Roto-Die |
10 |
Good |
sold |
Photo /
More Info. |
10' Brake: 10' Hydralic Roto-Die
Model 10
Voltage 220/440
Phase:3
Bending Capacity 120" x 16 gauge
72" x 10 gauge*
Motor 7-1/2 HP
Length of Stroke 3"
Strokes / Minute 20 to 50
Die Clearance 2-1/8"
Die Space 7-1/2"
Overall Dimensions -
Length 12' 1"
Front to Back 22"
Height 5' 3-1/2"
|
|
Ad # 14415 | Press Brakes (Hydraulic) |
? |
Roto Die |
10 |
Good |
sold |
Photo /
More Info. |
10ft. x 16 Gauge: Roto Die Hydraulic Press Brake
Model: 10
Capacity: 10ft. x 16 Gauge
6ft. x 10 Gauge
Electrical: 230/3 phase
Motor7-1/2 HP
Length of Stroke....3"
Strokes / Minute....20 to 50
Die Clearance.......2-1/8"
Die Space...........7-1/2"
1 - No. 37 Roto-Die with:
7º cross-braking groove
85º die opening 3/8” wide
85º die opening 7/8” wide
30º die opening 1/2” wide
Roto-Die hydraulic press brake is equipped
with
depth-of-stroke adjustment with indicators,
length-of-stroke adjustment. |
|
Ad # 11568 | Press Brakes (Hydraulic) |
80s? |
Hydra Tool |
100-10H |
Very Good |
sold |
Photo /
More Info. |
100 Ton 10 ft brake: HTC
Model 100-10H
100 Ton
10ft Throat 9" Distance between sides 8"
Hurco Backstop (needs service) |
|
Ad # 14408 | Press Brakes (Hydraulic) |
1989 |
Amada |
1040E |
Good |
sold |
Photo /
More Info. |
100 ton x 13ft: Amada # 1040E hyd press brake
tonnage: 100us
die length: 13ft (157.5")
dist between housings: 10.5ft(129.9")
stroke: 3.94"
2 axis cnc back gage
some tooling included
riging/loading fee approx: $1500.00 |
|
Ad # 13290 | Press Brakes (Hydraulic) |
1984 |
Brakemaster |
10ft x 150 ton |
Good |
sold |
Photo /
More Info. |
150 ton x 10 ft: Brake Master Hyd. Press brake
Tonnage: 150ton
bed length: 10ft
tonnage/pressure control
light curtain
clamp style manual backgage
no tooling included
brake can not be moved until new unit arrives in
july..but can be inspected |
|
Ad # 10771 | Press Brakes (Hydraulic) |
2008 |
Krras |
110 |
New |
sold |
Photo /
More Info. |
120 ton x 10ft: Krras 120 Ton x 10'
Model BEND 110.30
120 Ton capacity
With PGP-602 back gage option installed (Dual
axis NC programmable controller complete with ball
screw back gage and AC inverters 99 programs with
25 steps in each program)
|
|
Ad # 13629 | Press Brakes (Hydraulic) |
2006 |
Baykal |
1254 |
Excellent |
sold |
Photo /
More Info. |
4ft x 38 ton: Baykal hyd. press brake w/ cnc back gage
4’ x 38 ton
X/R gauge
Delem da 66 control
no tooling included
|
|
Ad # 12277 | Press Brakes (Hydraulic) |
1997 |
Primeline |
12Ft |
Good |
sold |
Photo /
More Info. |
220 Ton 12Ft: Primeline
220 Ton 12ft bed
10Ft Between housing Sides
36 inch DRO Back Gauge & ram up/down displays
10" Throat
190mm Stroke
15kw Motor |
|
Ad # 12864 | Press Brakes (Hydraulic) |
|
Allsteel |
135-10 |
Good |
sold |
Photo /
More Info. |
135 x 10ft: Allsteel 135--10 hyd press brake
Automec CNC99B 2 Axis Backgauge
135 ton x 10 ft
This brake comes with some tooling |
|
Ad # 10750 | Press Brakes (Hydraulic) |
1992 |
Betenbender |
14 x 120" |
Good |
sold |
Photo /
More Info. |
14' x 120 Ton capacity: Betenbender press brake,
14\GA x 120 ton capacity,
new 1992,
with Hurco single axis BG.
|
|
Ad # 5496 | Press Brakes (Hydraulic) |
1963 |
PACIFIC |
150-12 |
Good |
SOLD |
Photo /
More Info. |
150 TON, 12' PACIFIC HYDRAULIC PRESS BRAKE: CAPACITY -------------------------- 150 TONS
OVERALL LENGTH OF BED & RAM --------------- 12'
DISTANCE BETWEEN HOUSINGS ----------------- 8'5"
BENDING CAPACITY, MILD STEEL ---------- 10' 3/16"
STROKE OF RAM ----------------------------- 10"
OPEN HEIGHT ------------------------------- 15"
CLOSED HEIGHT ----------------------------- 5"
THROAT DEPTH ------------------------------ 6-3/4"
PIT REQUIRED FOR BED EXTENSION
BELOW FLOOR --- ( L x W x D ) ----- 10" X 2" X 16"
MAIN DRIVE MOTOR ------------------- 15 HP A.C.
OVERALL HEIGHT ---------------------------- 104"
( EXCLUDING 16" BELOW FLOOR SECTION )
EQUIPPED WITH:
UPPER DIE CLAMPS
LOWER DIE CLAMP
ELECTRIC CONTROL PEDAL
TONNAGE CONTROL
REMOVABLE RAM AND BED ANGLES |
|
Ad # 8281 | Press Brakes (Hydraulic) |
1987 |
LVD |
150-JS-10 |
Good |
Sold |
Photo /
More Info. |
150 Ton, 10' LVD Hydraulic Brake, with CNC Back Gauge: Bending Capacities:
10' x 3/16" Mild Steel
8' x 1/4" Mild Steel
Tonnage Capacity:150
Overall Length Of Bed & Ram:10'
Distance Between Housings:8'4"
Stroke:5.1"
Ram Adjustment:4.3"
Open Height:12.2"
Throat Depth:7.8"
Width Of Bed:7"
Floor To Top Of Bed:36"
Speeds Approx:236"/Min. - Approach
22"/Min. Pressing
184"/Min. - Return
Equipped With:
24" Hurco Autobend 5C Programmable Gauge With Vertical Adjustment
Free Standing Control With Dual
Palm Buttons; Foot Switch &
Emergency Stop Button
Power Ram Adjustment With
Pushbutton Control
3" High Die Rail
Pushbuttons For Start-Stop
Depth Setting Readout
Adjustable Tonnage Control
Sectional Ram Die Clamps
1/2 HP 1700 RPM 460/3/60
Ram Adj. Motor
Hydraulic Pump Driven By
12 HP 1740 RPM 230/460/3/60 Motor
|
|
Ad # 7575 | Press Brakes (Hydraulic) |
|
HTC |
150G |
Very Good |
Sold |
Photo /
More Info. |
150 TON X 12' HTC HYDRAULIC PRESS BRAKE: 150 TON X 12' HTC HYDRAULIC PRESS BRAKE
CAPACITY ................................. 150 TON
OVERALL LENGTH OF BED & RAM .............. 12'
DISTANCE BETWEEN HOUSINGS ................ 126-1/2´´
STROKE OF RAM ............................ 7´´
OPEN HEIGHT .............................. 12-1/2´´
CLOSED HEIGHT ............................ 5-1/2´´
DEPTH OF THROAT .......................... 8´´
RAM SPEED RAPID APPROACH ................. 60 IPM
RAM SPEED PRESS .......................... 40 IPM
RAM SPEED FAST RETURN .................... 120 IPM
FRONT OPERATED BACK GAUGE ................ HURCO
ELECTRIC FOOT TRIP ....................... YES
FLOOR STANDING ........................... YES
MOTOR .................................... 20 HORSEPOWER |
|
Ad # 11637 | Press Brakes (Hydraulic) |
2000 |
LVD |
150JS10 |
Very Good |
sold |
Photo /
More Info. |
10ft x 150Ton: used LVD Press Brake
10ft bed x 150 Tons
2- Axis CNC Back gage-Hurco Autobend 7 system-36" stroke
100" between Housings
8.5" throat depth
vari-tonnage control
Stroke counter
stroke height adj-5"
10KW main power needed
lots of tooling included
|
|
Ad # 9153 | Press Brakes (Hydraulic) |
|
Dries & Krump |
150P10 Pacemaker |
Good |
Sold |
Photo /
More Info. |
12ft overall, 126 between housings x 3/16 ...150 ton: 12 FT. X 3/16" 150 Ton
DREIS & KRUMP HYDRAULIC PRESS BRAKE
Model no. 150P10 Pacemaker
Bending capacities: 12' x 3/16" mild steel
8' x 1/4" mild steel
5' x 3/8" mild steel
Tonnage capacity: 150 tons
Overall length of bed & ram: 12'
Distance between housings: 126"
Stroke: 8"
Ram adjustment: 6"
Shut height S.D.A.U.: 12"
Throat depth: 8"
Width of bed: 6"
Floor to top of bed: 35"
Speeds approx: 322"/minute - advance
41"/minute - press
230"/minute - return
EQUIPPED WITH: 24" front operated manual back gauge
via hand lever with readout and
vertical adjustment
5-1/2" high die rail
Electric foot switch
Dual palm buttons for run
Emergency stop button
Stroke length adjustment
Power ram adjustment with pu Pushbuttons for start - stop
Key selector switches for forward -
reverse; hi - stop - lo use bypass
Sectional ram die clamps
Bijur one shot oil lubrication
1/2 HP 1725 RPM 230/460/3/60 ram
adjustment motor
Hydraulic pump driven by
25 HP 1800 RPM 230/460/3/60 motor
Weight approx. 22,200#
Overall dimensions approx. 146" L-R x 62" F-B X 118" H
|
|
Ad # 13696 | Press Brakes (Hydraulic) |
? |
Diacro |
16-72 |
Good |
sold |
Photo /
More Info. |
25 Ton x 72": Diacro Hydra Power Press Brake
Model: 16-72
CNC Diacro Back Gauge
Length of Bed 72"
Distance between housings 62"
Capacity in mild steel (6') 16 ga.
Stroke 2"
Ram Adjustment 3"
Throat clearance 9"
Horsepower 3hp
Floor space 44" X 72" X 92" high
Weight 5,000 lbs
|
|
Ad # 5827 | Press Brakes (Hydraulic) |
|
DIACRO |
16-72 |
Very Good |
Sold |
Photo /
More Info. |
72" x 16 Ga. 25 Ton Diacro Hydra-Mechanical Press Brake: LENGTH OF BED 72”
CLEARANCE BETWEEN HOUSING 62”
CAPACITY MILD STEEL 16 GA
STROKE OF RAM 2”
RAM ADJUSTMENT 3”
SHUT HEIGHT 9”
DIE HOLDER HEIGHT 3”
THROAT CLEARANCE 9”
EQUIPPED WITH:
NEW SEALS IN HYDRAULICS
NEW BEARINGS
POWER RAM ADJUSTMENT
FRONT OPERATED MANUAL BACK GAUGE
STROKE ADJUSTMENT
NEW PAINT |
|
Ad # 5495 | Press Brakes (Hydraulic) |
1974 |
DIACRO |
16-96 |
Good |
SOLD |
Photo /
More Info. |
35 TON, 8' DIACRO HYDRA-MECHANICAL PRESS BRAKE: LENGTH OF BED & RAM ----------------------- 96"
DISTANCE BETWEEN HOUSINGS ----------------- 62"
CAPACITY -------- ( MILD STEEL ) ---- 96" X 16 GA.
STROKE OF RAM ----------------------------- 2"
SHUT HEIGHT RAM UP, STROKE DOWN ----------- 9"
RAM ADJUSTMENT ---------------------------- 3"
THROAT CLEARANCE FROM CENTER OF DIES ------ 9"
MAIN DRIVE MOTOR ------------------- 3 HP A.C.
EQUIPPED WITH ---
HURCO AUTOBEND IV CNC BACK GAUGE WITH 24" RANGE
STROKE ADJUSTMENT
COMPLETE HYDRAULIC SYSTEM
LOWER & TOP DIE HOLDERS
FOOT PEDAL CONTROL |
|
Ad # 3116 | Press Brakes (Hydraulic) |
|
LVD |
165 BH |
|
sold |
Photo /
More Info. |
LVD CNC Press Brake Model 165 BH: 217" Bending length
New in 1985 (currently in plant under power)
Distance between side frames: 148"
40" Horn on right side
Distance between bed and ram: 13.8" Max
Stroke of ram: 5.9" max., Adjustment of ram 4.7"
Depth of gap in side frame: 9.8"
Motor 18 Hp, 230/460 3 phase
Slot and pit required for bed
Back gauge range increased from 24" to 40" at time of purchase Work lifting system Equipped with: Axis X1, X2, R, Z1, Z2, U, V, Alpha-numeric keyboard, tape recorder, programmable speed |
|
Ad # 6885 | Press Brakes (Hydraulic) |
|
Wysong |
168-22 |
Good |
SOLD |
Photo /
More Info. |
14 foot x 22 GA.wysong air/hydraulic brake-Heavy Duty: 14 foot x 22GA. Wysong Air/Hydraulic Break. Out of business sale. Break is ... |
|
Ad # 14068 | Press Brakes (Hydraulic) |
2008 |
Krras |
175 Ton x 10ft |
|
sold |
Photo /
More Info. |
175 Ton x 10ft: Used Krauss press brake,
175 ton by 10 feet
with four way 7 opening die and top die,
no leaks used very little |
|
Ad # 6412 | Press Brakes (Hydraulic) |
1983 |
BERTSCH |
175 x 10 |
Good |
SOLD |
No Photo /
More Info. |
175 TON X 10' BERTSCH HYDRAULIC BRAKE: 175 TON X 10' BERTSCH HYDRAULIC BRAKE:
CAPACITY ......................... 175 TON
OVERALL LENGTH OF BED ............ 10'
DISTANCE BETWEEN HOUSINGS ........ 8'6´´
STROKE ........................... 10´´
OPENING .......................... 17´´ MAXIMUM7´´ MINIMUM
CNC BACKGAUGE .................... YES |
|
Ad # 9154 | Press Brakes (Hydraulic) |
1983 |
Bertsch |
175-12 |
Good |
sold |
Photo /
More Info. |
175 Ton 12 foot: Specifications
Capacity: 175 Tons
Approach ram speeds (in/min): 245/88/29
Return ram speeds (in/min): 225/52
Overall bend length: 12'
Distance between housings: 10'6"
Platen height above floor: 36"
Bed projection below floor: 0"
Stroke length: 10"
Open height: 17"
Closed height: 7"
Throat depth: 8"
Platen width: 8"
Motor: 30 hp
Approximate shipping weight: 24,500 lbs.
Overall dimensions: 150" x 53" x 130"
Equipped With:
PC Ram control
no back gage
In plant under power @ customer's facility
|
|
Ad # 5756 | Press Brakes (Hydraulic) |
1981 |
LVD |
180-BH-10 |
Very Good |
Sold |
Photo /
More Info. |
165 TON X 10' LVD HYDRAULIC PRESS BRAKE: CAPACITY .......................... 165 TON
OVERALL LENGTH OF BED AND RAM ..... 10'
DISTANCE BETWEEN HOUSINGS ......... 8'6´´
STROKE OF RAM ..................... 6-7/8´´
MAXIMUM DIE SPACE ................. 16-3/4´´
MINIMUM DIE SPACE ................. 9-7/8´´
DEPTH OF THROAT ................... 9-7/8´´
WIDTH OF BED ...................... 7-3/4´´
DUAL PALM BUTTONS/ELECTRIC FOOT TRIP
|
|
Ad # 11076 | Press Brakes (Hydraulic) |
|
Cincinnati |
2 - 30 |
Very Good |
sold |
Photo /
More Info. |
6 ft -- 30 TON : SERIAL ............................ 28621
MODEL ............................. 2-30
CAPACITY .......................... 30 TON
OVERALL LENGTH OF BED AND RAM ..... 72"
DISTANCE BETWEEN HOUSINGS ......... 62"
STROKE OF RAM ..................... 2-1/2"
POWER RAM ADJUSTMENT .............. 4"
DIE SPACE, SDAU ................... 12"
DEPTH OF THROAT ................... 9"
POWER RAM ADJUSTMENT .............. YES
ELECTRIC FOOT PEDAL ............... YES
BACK GAUGE ........................ 24" MANUAL
DRIVE MOTOR, HORSEPOWER ........... 3
|
|
Ad # 10770 | Press Brakes (Hydraulic) |
2008 |
Krras |
200 |
New |
sold |
Photo /
More Info. |
12 x 220 Ton: Krras 220 Ton x 12'
Model BEND 200.37
220 Ton capacity, With PGP-602 back gage option installed (Dual axis NC programmable controller complete with ball screw back gage and AC inverters 99 Programs with 25 steps in each program)
|
|
Ad # 8274 | Press Brakes (Hydraulic) |
|
PACIFIC |
200-12 |
Good |
Sold |
Photo /
More Info. |
200 Ton Pacific, 12' OA, 10'5" BH, 10' x 1/4" Hydraulic Shear: Bending Capacities:
10' x 1/4" Mild Steel
8' x 5/16" Mild Steel
6' x 3/8" Mild Steel
Tonnage Capacity: 200 Tons
Overall Length Of Bed & Ram: 12'
Distance Between Housings: 10'5"
Stroke: 12"
Open Height: 17"
Closed Height: 5"
Throat Depth: 8"
Width Of Bed: 8"
Floor To Top Of Bed: 51"
Speeds Approx:
31"/Min. Normal Press
62"/Min. Return
Equipped With:
Electric Foot Switch
4" High Four Way Die Rail
Pushbuttons For Start-Stop
Stroke Length & Tilt Adjustment
Micrometer Depth Stop
Sectional Ram Die Clamps
Dovetail Slots In Front & Back Of Bed
Hydraulic Pump Driven By 25 HP 1800 RPM 220/440/3/60 Motor
|
|
Ad # 10055 | Press Brakes (Hydraulic) |
86?? |
Hydra-Tool Co:HTC |
200-12H |
Good |
sold |
Photo /
More Info. |
200 Ton x 12 ft: 200 Ton x 12 ft bed
124-1/2" between housings
8.5" throat
stroke counter
foot pedal
lube system-manual
lots of dies:1-2" opening-liitle rusty but will clean up ok-bead blast..
stroke adj.
24" power back gage
|
|
Ad # 13109 | Press Brakes (Hydraulic) |
|
HTC |
200-12H |
Good |
sold |
Photo /
More Info. |
12ft 200 Ton 5/16" x 10ft: HTC Press Brake
200 Ton 12 Ft
10Ft between the sides.
No tooling and No back gauge.
Machine is in great condition has been refurbished. |
|
Ad # 8279 | Press Brakes (Hydraulic) |
|
HTC |
200G |
Good |
Sold |
Photo /
More Info. |
200 Ton HTC, 12 ft HTC Hydraulic Press Brake: USED 12 FT. X 1/4" HTC HYDRAULIC BRAKEModel No. 200G
Bending capacity:12' x 1/4" mild steel
Tonnage capacity:200 tons
Overall length of bed & ram:12'
Distance between housings:10'5"
Stroke:7"
Open height:12-1/2"
Closed height:5-1/2"
Throat depth: 8"
Width of bed:5-5/16"
Speeds approx.:1"/Sec. - approach
.5"/Sec. - Press
1-1/4"/Sec. - return
EQUIPPED WITH:
36" Front operated manual micrometer
back gauge with vertical adjustment
Dual pushbuttons for operation
with emergency stop button
3-1/4" High die rail
Micrometer depth stop
Hydraulic pressure gauge
Bed & ram machined for angle-
front & back
Selector switch for normal-hold
Sectional ram die clamps
Pressure gauge
Hydraulic pump driven by
20 HP 1750 RPM 230/460/3/60 Motor
|
|
Ad # 8420 | Press Brakes (Hydraulic) |
1960 |
CHICAGO DRIES & KRUMP |
200HV10 |
Good |
sold |
Photo /
More Info. |
200 Ton: BENDING CAPACITY:1/4" X 10'
BEN & RAM OVERALL LENGTH:174"
DISTANCE BETWEEN HOUSINGS:124"
THROAT DEPTH:8"
STROKE:12"
OPEN HEIGHT:17"
CLOSED HEIGHT:5"
NO PIT REQUIRED
SPEEDS:ADVANCE 135"/ MIN
PRESSING 30"/ MIN
RETURN:145"/ MIN
MOTOR:(2)15 HP 1800 RPM
FRAME: 284U, 3 PAHAE, 60 CYC.220/440 VOLT
DOUBLE END HYDRAULIC PUMP MOTOR
EQUIPPED WITH:
24" HORN - RIGHT SIDE
FULL LENGTH SECTIONAL RAM DIE CLAMPS
FULL LENGTH T-SLOTTED BED
FOOT PEDAL CONTROL
no back gage
|
|
Ad # 9257 | Press Brakes (Hydraulic) |
|
Pacific |
200Ton x 12 ft |
Fair |
sold |
Photo /
More Info. |
200 ton 12 ft. bed: distance between housing-125"
12ft. bed
200 ton cap.variable
24" manualback gage
(includes lower die riser)
some tooling-verify ??
|
|
Ad # 5743 | Press Brakes (Hydraulic) |
1991 |
CINCINNATI |
230AF-16 |
Excellent |
SOLD |
Photo /
More Info. |
18' x 230 Ton CINCINNATI Auto Form Hydraulic Press Brake: Rated tonnage at bottom of stroke 230 ton
Rated bending capacity 18' x 10 Ga.
Overall length of bed and ram 18'
Distance between housings 16'6"
Length of stroke, adjustable up to 10"
Open height 17"
Closed height 7"
Throat depth 8"
Speed, approach 155 I.P.M.
slow form 3.4 I.P.M.
medium form 6.8 I.P.M.
rapid form 17 I.P.M.
return 175 I.P.M.
Depth x thickness of pit required 15" x 6"
Length of pit required 16'6"
|
|
Ad # 7579 | Press Brakes (Hydraulic) |
1980 |
CINCINNATI |
230CB12 |
Very Good |
Sold |
Photo /
More Info. |
230 TON X 14' CINCINNATI HYDRAULIC PRESS BRAKE With CNC Back Gauge: 230 TON X 14' CINCINNATI HYDRAULIC PRESS BRAKE
CAPACITY ......................... 230 TON
OVERALL LENGTH OF BED AND RAM .... 14'
DISTANCE BETWEEN HOUSING ......... 12'6´´
STROKE OF RAM .................... 10´´
OPEN HEIGHT ...................... 17´´
CLOSED HEIGHT .................... 7´´
DEPTH OF THROAT .................. 8´´
RAM SPEED HIGH ................... 101 IPM
RAM SPEED MEDIUM ................. 49 IPM
RAM SPEEDS LOW ................... 14 IPM
RAM SPEEDS RETURN ................ 95 IPM
HURCO AUTOBEND 20C CNC BACK GAUGE. YES
MILLED & DRILL FOR ANGLES ........ YES
ELECTRIC FOOT TRIP ............... YES
MOTOR ............................ 30 HORSEPOWER |
|
Ad # 14104 | Press Brakes (Hydraulic) |
1990s |
Cincinnati |
230CBIIx10 |
Good |
sold |
Photo /
More Info. |
230 Ton 10ft : Cincinnati 230 Ton Press Brake in excellent
condition
230CBIIx10
12 Foot Bed Length
16" Stroke
|
|
Ad # 9063 | Press Brakes (Hydraulic) |
1994 |
LVD |
240/20-PP1 |
Very Good |
Sold |
Photo /
More Info. |
20 ft x 240 tons: 20ft bed
200 inches / 16'7" between houisings
12" throat
240 ton
pit required
max capacity: PPI 220/61?? on tag
upper & lower dies
1/2" wide V lower die opening -used for this HVAC sheet metal work
Back gage LVD/Barco # MNC95C not sure if 3 axis, verify ??
floppy drive
Auto leveling system?
dual palm buttonsafety switch- roll around pendent
Currently set in a shallow pit
34"in rear power back gage W/ up/down & in /out control
|
|
Ad # 6406 | Press Brakes (Hydraulic) |
|
CINCINNATI |
300 X 14 |
Very Good |
Sold |
Photo /
More Info. |
300 TON X 14' CINCINNATI HYDRAULIC PRESS BRAKE: 300 TON X 14' CINCINNATI HYDRAULIC PRESS BRAKE
CAPACITY ........................... 300 TON
OVERALL LENGTH OF BED & RAM ........ 14'
DISTANCE BETWEEN THE HOUSINGS ...... 12'6´´
STROKE ............................. 12´´
OPEN HEIGHT ........................ 22´´
CLOSED HEIGHT ...................... 10´´
THROAT ............................. 11´´
RAM SPEED FAST PRESS ............... 77 IPM
RAM SPEED FULL TONNAGE PRESS ....... 37 IPM
RAM SPEEDS RETURN .................. 80 IPM
MILLED & DRILLED FOR ANGLES ........ YES
ELECTRIC FOOT TRIP ................. YES
MOTOR .............................. 40 HORSEPOWER |
|
Ad # 8423 | Press Brakes (Hydraulic) |
|
Pacific |
300-10 |
Good |
sold |
Photo /
More Info. |
300 TON x 10ft hyd press brake: CAPACITY: 300 TONS
RAM & BED OVERALL LENGTH: 10'0"
DISTANCE BETWEEN HOUSINGS: 8'4-1/2"
WIDTH OF BED: 8"
THROAT DEPTH: 10"
STROKE: 12"
OPEN HEIGHT: 20"
CLOSED HEIGHT: 8"
BED PROJECTION BELOW FLOOR: 18"
BED HEIGHT ABOVE FLOOR: 32"
MOTOR: 30 HP
pit required for front base
EQUIPPED WITH:
top V Die 8ft?? verify
TONNAGE CONTROL & INDICATOR
2-SPEED POWER UNIT
FOOT PEDAL
OAD: 10'4" L-R X 6'8" F-B X 10'0" HIGH (ABOVE FLOOR)
APPROXIMATE WEIGHT: 32,500 |
|
Ad # 6929 | Press Brakes (Hydraulic) |
1997 |
LVD |
350BH15 |
Very Good |
Sold |
Photo /
More Info. |
LVD MODEL 350BH15 CNC HYDRAULIC PRESS BRAKE: LVD MODEL 350BH15 CNC HYDRAULIC PRESS BRAKE
Capacity: 350 Ton
Overall Length of Bed and Ram: 15'
Distance Between Housings: 12'6"
Stroke: 11.8" (Maximum)
Open Height: 15.75"
Throat Depth: 22.4"
Speeds: 236 IPM - Advance
30 IPM - Pressing
283 IPM - Return
Width of Bed Top: 10.6"
All Steel Welded Construction
Flush Floor Design
EQUIPPED WITH:
LVD Model MNC-95/C 5-Axis Control System
4-Axis Back Gauge
Sectional Ram Clamps
60 HP AC Main (Pump) Drive Motor
Self-Contained Hydraulic Power Unit
Electrical Controls
Sight Type Oil Level Gauge
BENDING CAPACITY:
15' x 3/8" |
|
Ad # 995 | Press Brakes (Hydraulic) |
90's |
custom |
40 Ton |
Needs Work |
Sold |
Photo /
More Info. |
Small Press Brake 40 Ton x 42": 42" bed
tee-slotted table;
hyd. unit,
foot switch;
fingers in top rail
2 avaiable
some tooling shown |
|
Ad # 8880 | Press Brakes (Hydraulic) |
1965 |
Pacific |
400-14 |
Good |
Sold |
Photo /
More Info. |
400 Tons: Bending Capacity 14' x 3/8" Mild Steel
10'x 1/2" Mild Steel
7' x 5/8" Mild Steel
Tonnage Capacity 400 Tons
Overall Length of Bed and Ram 14'
Distance Between Housings 12'4.5"
Stroke 12"
Open Height 20"
Closed Height 8"
Throat Depth 10"
Width of Bed 10"
Floor to Top of Bed 32"
Speeds Approximate 140"/Min. Advance
65"/Min. Press
131"/Min. Return
Equipped With 24" Hurco "Autobend 7" 2-Post
Programmable Back Gauge
Vertical Adjustment
Stroke Length, Tilt Adjustment, Tonnage Control
Micrometer Depth Stop
Pushbuttons for Start-Stop
Selector Switch for Inch-Run
Ram Machined for Angles-Front/Back
Sectional Ram Die Clamps
Vickers Hydraulic Pump
Driven by 40 HP 1770 rpm
34" Pit Required
|
|
Ad # 12969 | Press Brakes (Hydraulic) |
1969 |
Pacific |
400-17 |
Good |
sold |
Photo /
More Info. |
400 ton:breaking capacity 3/8" x 19': Pacific Hydraulic Brake 14ft x 3/8"
Year-1969
Model-400-17
400 ton capacity
1.5" horn on one end to make 19' overall
Breaking Capacity-full length-3/8" x 19'
between housings 14ft-4"
Several Extra smaller Dies
4 Way Die bottom included plus shorter dies
included
Accu Bend Computer (Not Pictured)
CNC Back Stop back stop(Not Pictured)
Voltage-220/440 3 Phase
|
|
Ad # 4813 | Press Brakes (Hydraulic) |
1996 |
PREMIER |
425.2 MOD 12 |
Demo Machine |
Sold |
Photo /
More Info. |
PREIMER 25 TON CNC DEMO MACH.: CAPACITY ---------------------------- 25 TONS
BEND CAPACITY ----------------------- 4' X 16 GAUGE
DISTANCE BETWEEN FRAMES ------------- 30"
BED LENGTH -------------------------- 4'
RAM STROKE -------------------------- 4"
RAM OPEN HEIGHT --------------------- 10-1/2"
THROAT DEPTH ------------------------ 4"
RAM APPROACH SPEED ------------------ 240 IPM
RAM BEND SPEED ---------------------- 24 IPM
RAM RETURN SPEED -------------------- 300 IPM
MOTOR ------------------------------- 3 H.P., 230V, 3 PHASE
WEIGHT (APPROX.) -------------------- 3,150 LBS.
OVERALL DIMENSIONS (APPROX.) -------- 48"L X 42"W X 78" HIGH
HURCO AB-7/LP-11 CONTROL SYSTEM:
PROGRAMS ---------------------------- 600
NUMBER OF BENDS --------------------- 2400
GAUGE TRAVEL ------------------------ 24"
VERTICAL ADJUSTMENT ----------------- 10"
HORIZONTAL ADJUSTMENT --------------- 9"
GAUGE ADJUSTMENT -------------------- +/- .003"
GAUGE REPEATABILITY ----------------- +/- .002"
GAUGE SPEED ------------------------- 800 IPM
GAUGE HOLDING FORCE ----------------- 200 LBS.
POWER ------------------------------- 115/230 VAC |
|
Ad # 8291 | Press Brakes (Hydraulic) |
|
Ajial |
502 M |
Good |
sold |
Photo /
More Info. |
50 Ton x 7 ft Hydraulic Press Brake: 7 FT. X 12 GA. AJIAL HYDRAULIC PRESS BRAKE
Tonnage Capacity:50 Tons
Bending Capacity:7" x 12 GA Mild Steel
Overall Length of Bed & Ram:84"
Distance Between Housings:80"
Stroke:3.9"
Open Height:11.8"
Throat Depth:15.7"
Width of Bed:3.9"
Floor To Top Of Bed:32 3/4"
Speeds Approx:1.9"/Sec. - Approach
.29"/Sec. - Press
1.8"/Sec. - Return
Equipped With:
Electric Foot Switch
3" High Die Rail
Sectional Ram Die Clamps
Selector Switch For Start - Stop
Speed Adjustment Control
Tonnage Control With Pressure Gauge
Emergency Stop Button
Hydraulic Pump Driven By
5 1/2 HP 1700 RPM 440/3/60 Motor
|
|
Ad # 13244 | Press Brakes (Hydraulic) |
1997 |
Betenbender |
50T x 12ft |
Good |
sold |
Photo /
More Info. |
50 ton x 12ft bed: Betenbender 50 Ton capacity x 12 ft bed
manual clamp style back gage
175 hrs on machine
no tooling included
tonnage control |
|
Ad # 14618 | Press Brakes (Hydraulic) |
1997 |
Betenbender |
50T x 12ft |
Good |
sold |
Photo /
More Info. |
12ft x 50 ton : Betenbender Hydraulic press brake
50 Ton capacity x 12 ft bed
manual clamp style back gage
approx:175 hrs on machine(on time)very low
no tooling included
has tonnage control
note:can be upgraded easily to a 70ton
capacity for approx: $1500.00
rigging/loading onto flat bed truck
fee:$1750.00
|
|
Ad # 8860 | Press Brakes (Hydraulic) |
2007 |
Accurpress Accel |
515012 |
Good |
sold |
Photo /
More Info. |
150 Tons: Tonnage 150 Tons
Length of Bed 144"
Distance Between Frames 130"
Bed Height 34"
Length of Ram Stroke 10"
Ram Open Height 26"
Throat Depth 8"
Ram Closed Height 16"
Approach Speed 480
Bend Speed 24-48
Return Speed 320
Motor 20HP
Approximate Dimensions 161"L-R x 78"F-B x 100"H
Equipped With ETS3000 Supreme Backguage
12.1' TFT Active Matrix Screen Graphical Display
Bend Simulation with Interference and Tool Overload Checking
3000 Programs- 50 Steps Each Program
Off Line Programming and Program Storage Via: RS323 Link or 3.5 Diskette
Premium Servo Controlled CNC Backgauge
6 Axis: Y1/Y2, X, R, & Z1/Z2,
Optional R and Z1/Z2 Axis Offer Productivity Boost
Wila NSCL II New Standard Clamping
Lazer Safe Safety Guarding
Front Sheet Support Fixtures
Standard Ram Open Height is 18"
Increased by 8" for total of 26"
|
|
Ad # 5489 | Press Brakes (Hydraulic) |
1977 |
DIACRO |
55-10 |
Good |
Sold |
Photo /
More Info. |
55 TON DIACRO HYDRA-MECHANICAL PRESS BRAKE: LENGTH OF BED & RAM ----------------------- 120"
DISTANCE BETWEEN HOUSINGS ----------------- 102"
CAPACITY ----- ( MILD STEEL ) ------ 120" X 14 GA.
STROKE OF RAM ----------------------------- 3"
SHUT HEIGHT RAM UP, STROKE DOWN ----------- 12"
RAM ADJUSTMENT ---------------------------- 4"
THROAT CLEARANCE FROM CENTER OF DIES ------ 8"
MAIN DRIVE MOTOR ------------- 10 HP 230/460/3/60
EQUIPPED WITH ---
24" CNC BACK GAUGE ( 1 AXIS )
STROKE ADJUSTMENT
COMPLETE HYDRAULIC SYSTEM
LOWER & TOP DIE HOLDERS
FOOT PEDAL CONTROL |
|
Ad # 5490 | Press Brakes (Hydraulic) |
1986 |
LDV |
55-BH-08N |
Good |
sold |
Photo /
More Info. |
55 TON LVD CNC HYDRAULIC PRESS BRAKE: TONNAGE CAPACITY ------------------ 55 TONS
OVERALL WORK LENGTH ----------------------- 100"
DISTANCE BETWEEN HOUSINGS ----------------- 80"
RAM STROKE ----------- ( MAXIMUM ) -------- 4"
RAM ADJUSTMENT ---------------------------- 3"
MAXIMUM DISTANCE BETWEEN BED AND RAM ------ 12"
DEPTH OF GAP ------------------------------ 8"
WIDTH OF BED ------------------------------ 5-
1/2"
MAIN DRIVE MOTOR ------------- 4 KW 230/460/3/60
EQUIPPED WITH ---
MNC 800 CNC BACK GAUGE WITH 30" RANGE
LOWER DIE HOLDER
UPPER DIE HOLDER
PEDESTAL CONTROL STATION WITH DUAL PALM & FOOT
CONTROL |
|
Ad # 9161 | Press Brakes (Hydraulic) |
80's |
BSI |
6 x 95 Ton |
Good |
SOLD |
Photo /
More Info. |
95 Tons x 6 ft: 6 ft x 95 ton
New Hydraulic system |
|
Ad # 11235 | Press Brakes (Hydraulic) |
2006 |
Betenbender |
6-50T |
Very Good |
sold |
No Photo /
More Info. |
50 ton x 6ft: 50 Ton x 6ft
programable back press
** MADE IN THE U.S.A. **
BETENBENDER HYDRAULIC PRESS BRAKE QUOTE
Model 6' x 50 Ton
SPECIFICATIONS:
Maximum Tonnage ......................... 50 Tons
Maximum Bending Length .................. 72 inches
Maximum Stroke Length ................... 8 inches
Open Height ............................. 14 inches
Closed Height . . . . . . . . . . . . . . 6 Inches
Throat Depth ............................ 8 inches
Distance Between Housings ............... 54-1/2 inches
Ram Repeatability ....................... +/- .002"
Hydraulic Pressure ...................... 2500 lbs.
Hydraulic Oil Capacity .................. 31 Gallons
Machine Weight .......................... 6,800 lbs.
Machine Dimensions:
Overall Height ................. 104 inches
Overall Length ................. 87 inches
Overall Width .................. 45 inches
Bed Height .............................. 28 Inches
Motor Horsepower ........................ 10
ACCURACY
Every Betenbender machine is thoroughly inspected and tested.
1.Parallelism is maintained between bed and ram or at preset
angle by using precision automatic leveling controls. Parallelism
is maintained at +/-.002" in low speed.
2.The ram bottom reversal point is controlled by precise limit
switches referenced off the bed. This isolates housing deflections, which can interfere with its accuracy.
Enhanced Productivity
Return speeds and rapid advance facilitate high cycle rates.
Operator control is simplified by slow and press speed, thus work
spoilage is avoided. Rapid advance with automatic change. The point
of speed change is fully adjustable by electric limit switch.
Micrometer type tilt adjustment is graduated in .001" increments
permitting ram tilt adjustments up to 1/2" in either direction.
ELECTRO MECHANICAL STROKE CONTROL is bed referenced.
Bottom limit is manually set with a lead screw and displayed by an mechanical readout calibrated in .001" increments.
VERSATILITY
BETENBENDER'S press brakes have long full tonnage strokes,
adjustable length and selectable speed combinations, adjustable
height for short stroke, 2-speed standard and the optional 3- speed for adjustable low speed to prevent whip.
ELECRICAL EQUIPMENT
Meets requirements of NFPA no.79, JIC and construction requirements of the latest ANSI B-11.3 Standards. Includes drip-proof, continuous duty 45 degree Celsius ambient hydraulic pump motor wired for 230 or 460 volt, 3 phase 60 hertz.
DEPENDABILITY
Self-lubricating replaceable non-metallic ways prevent galling and provide long service life. Cylinders are high-strength, all steel. To minimize wear and provide a superior oil seal, inside
cylinder surfaces are honed to a mirror finish.
Compact, precision machined aluminum manifold incorporates off-the shelf components, minimizes piping and consolidates "O" ring
mounted valves.
Quiet, vane type constant volume pumps. In keeping with good hydraulic design practice, these energy efficient pumps are located outside the reservoir.
Filtration of contaminants as small as 10 microns is accomplished
with intake and discharge filters. A built-in magnetic trap and air breather filter provide added protection against contaminants. Reservoir of large capacity facilitates effective heat dissipation. A fluid level gauge is provided.
CONTROL
Main Control Cabinet - NEMA 12 enclosures mounted in the right housing containing: magnetic non-reversing motor starter and 120 volt circuit.
Main motor START button and STOP button are illuminated.
RAM UP and RAM DOWN buttons.
RUN/JOG Switch.
Fusible disconnect.
MAINTENANCE
Clevis mounted cylinders eliminate cylinder binding by reducing the possibility of oil leaks from cylinder binding. (Pins & bushings do not rotate under load, this reduces excessive wear)
STANDARD EQUIPMENT
Clamp Type Backgauge-Manual American-Made Motor
Adjustable x,y,z All Steel Construction
Depth Stop w/Readout Two Speed Ram
Hour Meter All Hydraulic Fluid Included
Three Position Foot Pedal Disconnect Switch
NEMA Electrics Bottom Time Delay
BET650T
Standard Press Brake Equipment
Clamp Type Backgauge� Manual Adjustable X, Y, & ZAmerican Made Motors
Two Speed RamHour Meter
Bottom Time DelayNema Electrics
Three Position Foot PedalAll Hydraulic Fluids Included
Depth Stop w/Digital ReadoutDisconnect Switch
Three Speed (95T and Larger)All Steel Construction
|
|
Ad # 8069 | Press Brakes (Hydraulic) |
2002 |
Betenbender |
6-50T |
Very Good |
Sold |
Photo /
More Info. |
50 Ton x 6 ft bed: 50 ton capacity
6 ft bed , 65" between housings
power backgage with digital readout display speed control on bacgage
no tooling included
|
|
Ad # 13710 | Press Brakes (Hydraulic) |
1985 |
Pirahna |
65ton |
Excellent |
sold |
Photo /
More Info. |
65 ton x 8ft: (1985)
65 ton Piranha Brake
overall bed 8'
between housing 6'-1/2"
inching, jogging
speed control
some tooling
manual back gauge
speed control says 0-100 |
|
Ad # 8286 | Press Brakes (Hydraulic) |
1993 |
Betenbender |
6ft x 95 Ton |
Good |
Sold |
Photo /
More Info. |
95 Ton x 6 ft Betenbender Hydraulic Brake: Tonnage Capacity:95 Tons
Bending Capacities:6' x 3/16" Mild Steel
5' x 1/4" Mild Steel
Overall length of Bed & Ram:72-1/2"
Distance Between Housings:60-1/2"
Stroke:8"
Open Height:14"
Closed height:6"
throat Depth:8"
Width of Bed:4"
Floor to Top of Bed:37"
Speeds Approx.:50"/Min. - Press
114"/Min. - Rapid Approach
168"/Min. - Return
EQUIPPED WITH:
24" Front Operated Manual Back
Gauge w/Readout Via Hand Wheel
Bed Machined For Angles - Front & Back
3-1/4" High 4-Way Die Rail
Free Standing Control w/Electric
Foot Switch & Emergency Stop Button
Selector Switch for Run - Jog;
Push - Pull Button For Start - Stop
Pushbutton For Up - Down
Tonnage Indicator
Hand Wheel Control For Depth of
Bed Adjustment
Sectional Ram Die Clamps
Hydraulic Pump Driven by
20 HP 1760 RPM 230/460/3/60 Motor
|
|
Ad # 7573 | Press Brakes (Hydraulic) |
1976 |
PACIFIC |
70-6 |
Good |
Sold |
Photo /
More Info. |
70 TON X 6' PACIFIC HYDRAULIC PRESS BRAKE With CNC Back Gauge: 70 TON X 6' PACIFIC HYDRAULIC PRESS BRAKE
CAPACITY ................................. 70 TON
OVERALL LENGTH OF BED & RAM .............. 72´´
DISTANCE BETWEEN HOUSINGS ................ 51-1/2´´
STROKE OF RAM ............................ 8´´
OPEN HEIGHT .............................. 15´´
CLOSED HEIGHT ............................ 7´´
DEPTH OF THROAT .......................... 6´´
AUTO GAUGE CNC BACK GAGE MODEL ........... 1000
ELECTRIC FOOT TRIP ....................... YES
MILLED & DRILLED FOR ANGLES .............. YES
MOTOR .................................... 12-1/2 HORSEPOWER |
|
Ad # 6906 | Press Brakes (Hydraulic) |
1984 |
ALLSTEEL |
70-6 |
Very Good |
sold |
Photo /
More Info. |
70 TON X 6' ALLSTEEL HYDRAULIC PRESS BRAKE: 70 TON X 6' ALLSTEEL HYDRAULIC PRESS BRAKE
TONNAGE ......................... 70 TONS
OVERALL LENGTH OF BED & RAM ..... 72´´
DISTANCE BETWEEN HOUSINGS ....... 54´´
CAPACITY ........................ 6 X 3/16´´ MILD STEEL
STROKE .......................... 6´´ MAXIMUM
SHUT HEIGHT (SDAU) .............. 15´´
CLOSED HEIGHT ................... 9´´
THROAT .......................... 8´´
RAM SPEED APPROACH .............. 130 IPM
RAM SPEED PRESSING .............. 60 IPM
RAM SPEED RETURN ................ 130 IPM
FLOOR TO BED .................... 32´´
ELECTRIC FOOT TRIP .............. YES
MOTOR ........................... 20 HORSEPOWER |
|
Ad # 7574 | Press Brakes (Hydraulic) |
1994 |
ACCUPRESS |
7013020 |
Very Good |
Sold |
Photo /
More Info. |
130 TON X 20' ACCUPRESS HYDRAULIC BRAKE With CNC Back Gauge: 130 TON X 20' ACCUPRESS HYDRAULIC BRAKE
CAPACITY ........................... 130 TON
OVERALL LENGTH OF BED & RAM ........ 20'
DISTANCE BETWEEN HOUSING ........... 15'
STROKE ............................. 8´´
OPEN HEIGHT ........................ 14´´
CLOSED HEIGHT ...................... 6´´
SPEEDS ADVANCE ..................... 115 IMP
RAM SPEEDS PRESSING ................ 20 IPM
RAM SPEED RETURN ................... 180 IPM
CNC BACK GAUGE ..................... AUTO GAUGE1000
PROGRAMABLE OPERATOR STATION ....... YES
FOOT CONTROL ....................... YES |
|
Ad # 10985 | Press Brakes (Hydraulic) |
2001 |
Accurpress |
7025012 |
Very Good |
sold |
Photo /
More Info. |
250 Ton x 12ft: Machine is ready to use, has a manual back-gauge, and 12' bed length.
250 ton |
|
Ad # 8856 | Press Brakes (Hydraulic) |
2000 |
Accurpress |
710010 |
Good |
Sold |
Photo /
More Info. |
100 Tons: Capacity 100 Tons
Overall Length of Bed and Ram 10"
Distance Between Frames 100"
Stroke 8"
Throat Depth 10"
Open Height 14"
Closed Height 6"
Speeds
Fast Approach 115IPM
Slow Bend 24 IPM
Fast Return 260 IPM
Approximate Cycles Per Minute (F.S.) 15
Back Gauge Range 24"
Bed Height 34"
Bed Width 3.5"
Main Motor 10HP
Equipped With Accurpress ETS 3000 Control System with Premium CNC Backgauge
5 Axis Premium CNC Gauging, Y, X, R, Z1, Z2 Axis
Adjustable Bend Speed Control
Complete Set of Upper Punch Holders
Bottom Filler Block
Electric Foot Switch,
Pedestal Dual Palm Controls
Complete Electrical Controls
Includes all Available Manuals and Accessories
|
|
Ad # 8861 | Press Brakes (Hydraulic) |
1989 |
Accurpress |
713010 |
|
sold |
Photo /
More Info. |
130 tons: Capacity 130 Ton
Overall Length of Bed and Ram 10'
Distance Between Housings 8'4"
Stroke 8" (Maximum)
Open Height 18"
Closed Height 10"
Throat Depth 10"
Bed Height 34"
Speeds 60 IPM - Fast Approach; 16 IPM- Bend
140 IPM-Fast Return
Equipped With Flush Floor Design
Machined Ram for Removable Angles
Upper and Lower Die Holder
Stroke Length Control
Disconnect Switch
Manual Back Gauges
Complete Electrical Controls
Includes All Available Manuals and Standard
Equipment
|
|
Ad # 9480 | Press Brakes (Hydraulic) |
95/96 |
Accupress |
717512 |
Very Good |
SOLD |
Photo /
More Info. |
175 Ton x12'bed--will bend 12ft x 1/4" steel: Std. specs below please verify..
Capacity .................................. 175 Tons
Length of Bed ............................. 12'
Distance Between Frames ................... 124"
Bed Height ................................ 34"
Bed Width ................................. 5.5"
Ram Stroke ................................ 8"
Open Height ............................... 14"
Closed Height ............................. 6"
Throat Depth .............................. 10"
Fast Approach ............................. 90 ipm
Slow Bend ................................. 24 ipm
Fast Return ............................... 180 ipm
Motor ..................................... 20 HP
Equipped With: please verify below
Advantage Press Brake Package-verify
adjustable Bend Speed
Groove in bed
Back Gage
Overall Dimensions: 168" L x 55" W x 88" H
Overall Weight (approx.): 24,000 lbs.
CNC 99 Autobackgauge-2 axis. Unit
Was used to bend light gauge material
has tooling
can be powered up.
Unit was aquired in business purchase along with Wysong shear (see other listing) |
|
Ad # 8859 | Press Brakes (Hydraulic) |
1998 |
Accurpress |
71758 |
Good |
sold |
Photo /
More Info. |
175 Tons: Overall Length 120"
Overall Tonnage 175 Tons
Hurco 2 Axis CNC Backgauge
(2) 36" Front Support Arms
Distance Between Frames 76"
Bed Height 34"
Bed Capacity Width 5.5"
Stroke 8"
Open Height 14"
Throat Depth 10"
Approximate Speed Fast Approach 90" / Min.
Slow Bend 24" / Min.
Fast Return 180" / Min.
Horsepower 15
Voltage 220/480
|
|
Ad # 7572 | Press Brakes (Hydraulic) |
1995 |
ACCURPRESS |
7608 |
Very Good |
Sold |
Photo /
More Info. |
60 TON X 8' ACCURPRESS HYDRAULIC PRESS BRAKE With CNC: 60 TON X 8' ACCURPRESS HYDRAULIC PRESS BRAKE
CAPACITY .................................... 60 TONS
OVERALL LENGTH OF BED & RAM ................. 96
DISTANCE BETWEEN HOUSINGS ................... 78´´
STROKE OF RAM ............................... 8´´
OPEN HEIGHT ................................. 14´´
CLOSED HEIGHT ............................... 6´´
DEPTH OF THROAT ............................. 10´´
RAM SPEED FAST APPROACH ..................... 90 IPM
RAM SPEED SLOW BEND ......................... 24 IPM
RAM SPEED FAST RETURN ....................... 180 IPM
2 AXIS AP-2 CNC CONTROL ..................... YES
MACHINED FOR ANGLES ......................... YES
ELECTRIC FOOT PEDAL ......................... YES
PEDESTAL PALM BUTTONS ....................... YES
EXPANDABLE MEMORY OPTION .................... YES
MOTOR ....................................... 10 HORSEPOWER |
|
Ad # 10534 | Press Brakes (Hydraulic) |
|
Bentenbender |
8' x 70 ton |
Very Good |
Sold |
Photo /
More Info. |
Remanufactured Betenbender 8' x 70 Ton Press Brake: All New Electrical including 10HP Motor, Footswitch, Enclosure & Switch Bra... |
|