Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9691 | Press Brakes (Hydraulic) |
|
|
homemade |
Good |
sold |
Photo /
More Info. |
Horiz: press brake: 12" length-V die
can bend-1"
dies incl.
includes loading on your truck |
|
Ad # 14051 | Press Brakes (Hydraulic) |
|
|
|
Good |
sold |
Photo /
More Info. |
75 Ton 10Ft: 75 Ton
10Ft bed |
|
Ad # 7574 | Press Brakes (Hydraulic) |
1994 |
ACCUPRESS |
7013020 |
Very Good |
Sold |
Photo /
More Info. |
130 TON X 20' ACCUPRESS HYDRAULIC BRAKE With CNC Back Gauge: 130 TON X 20' ACCUPRESS HYDRAULIC BRAKE
CAPACITY ........................... 130 TON
OVERALL LENGTH OF BED & RAM ........ 20'
DISTANCE BETWEEN HOUSING ........... 15'
STROKE ............................. 8´´
OPEN HEIGHT ........................ 14´´
CLOSED HEIGHT ...................... 6´´
SPEEDS ADVANCE ..................... 115 IMP
RAM SPEEDS PRESSING ................ 20 IPM
RAM SPEED RETURN ................... 180 IPM
CNC BACK GAUGE ..................... AUTO GAUGE1000
PROGRAMABLE OPERATOR STATION ....... YES
FOOT CONTROL ....................... YES |
|
Ad # 9480 | Press Brakes (Hydraulic) |
95/96 |
Accupress |
717512 |
Very Good |
SOLD |
Photo /
More Info. |
175 Ton x12'bed--will bend 12ft x 1/4" steel: Std. specs below please verify..
Capacity .................................. 175 Tons
Length of Bed ............................. 12'
Distance Between Frames ................... 124"
Bed Height ................................ 34"
Bed Width ................................. 5.5"
Ram Stroke ................................ 8"
Open Height ............................... 14"
Closed Height ............................. 6"
Throat Depth .............................. 10"
Fast Approach ............................. 90 ipm
Slow Bend ................................. 24 ipm
Fast Return ............................... 180 ipm
Motor ..................................... 20 HP
Equipped With: please verify below
Advantage Press Brake Package-verify
adjustable Bend Speed
Groove in bed
Back Gage
Overall Dimensions: 168" L x 55" W x 88" H
Overall Weight (approx.): 24,000 lbs.
CNC 99 Autobackgauge-2 axis. Unit
Was used to bend light gauge material
has tooling
can be powered up.
Unit was aquired in business purchase along with Wysong shear (see other listing) |
|
Ad # 8859 | Press Brakes (Hydraulic) |
1998 |
Accurpress |
71758 |
Good |
sold |
Photo /
More Info. |
175 Tons: Overall Length 120"
Overall Tonnage 175 Tons
Hurco 2 Axis CNC Backgauge
(2) 36" Front Support Arms
Distance Between Frames 76"
Bed Height 34"
Bed Capacity Width 5.5"
Stroke 8"
Open Height 14"
Throat Depth 10"
Approximate Speed Fast Approach 90" / Min.
Slow Bend 24" / Min.
Fast Return 180" / Min.
Horsepower 15
Voltage 220/480
|
|
Ad # 8856 | Press Brakes (Hydraulic) |
2000 |
Accurpress |
710010 |
Good |
Sold |
Photo /
More Info. |
100 Tons: Capacity 100 Tons
Overall Length of Bed and Ram 10"
Distance Between Frames 100"
Stroke 8"
Throat Depth 10"
Open Height 14"
Closed Height 6"
Speeds
Fast Approach 115IPM
Slow Bend 24 IPM
Fast Return 260 IPM
Approximate Cycles Per Minute (F.S.) 15
Back Gauge Range 24"
Bed Height 34"
Bed Width 3.5"
Main Motor 10HP
Equipped With Accurpress ETS 3000 Control System with Premium CNC Backgauge
5 Axis Premium CNC Gauging, Y, X, R, Z1, Z2 Axis
Adjustable Bend Speed Control
Complete Set of Upper Punch Holders
Bottom Filler Block
Electric Foot Switch,
Pedestal Dual Palm Controls
Complete Electrical Controls
Includes all Available Manuals and Accessories
|
|
Ad # 7572 | Press Brakes (Hydraulic) |
1995 |
ACCURPRESS |
7608 |
Very Good |
Sold |
Photo /
More Info. |
60 TON X 8' ACCURPRESS HYDRAULIC PRESS BRAKE With CNC: 60 TON X 8' ACCURPRESS HYDRAULIC PRESS BRAKE
CAPACITY .................................... 60 TONS
OVERALL LENGTH OF BED & RAM ................. 96
DISTANCE BETWEEN HOUSINGS ................... 78´´
STROKE OF RAM ............................... 8´´
OPEN HEIGHT ................................. 14´´
CLOSED HEIGHT ............................... 6´´
DEPTH OF THROAT ............................. 10´´
RAM SPEED FAST APPROACH ..................... 90 IPM
RAM SPEED SLOW BEND ......................... 24 IPM
RAM SPEED FAST RETURN ....................... 180 IPM
2 AXIS AP-2 CNC CONTROL ..................... YES
MACHINED FOR ANGLES ......................... YES
ELECTRIC FOOT PEDAL ......................... YES
PEDESTAL PALM BUTTONS ....................... YES
EXPANDABLE MEMORY OPTION .................... YES
MOTOR ....................................... 10 HORSEPOWER |
|
Ad # 10985 | Press Brakes (Hydraulic) |
2001 |
Accurpress |
7025012 |
Very Good |
sold |
Photo /
More Info. |
250 Ton x 12ft: Machine is ready to use, has a manual back-gauge, and 12' bed length.
250 ton |
|
Ad # 8861 | Press Brakes (Hydraulic) |
1989 |
Accurpress |
713010 |
|
sold |
Photo /
More Info. |
130 tons: Capacity 130 Ton
Overall Length of Bed and Ram 10'
Distance Between Housings 8'4"
Stroke 8" (Maximum)
Open Height 18"
Closed Height 10"
Throat Depth 10"
Bed Height 34"
Speeds 60 IPM - Fast Approach; 16 IPM- Bend
140 IPM-Fast Return
Equipped With Flush Floor Design
Machined Ram for Removable Angles
Upper and Lower Die Holder
Stroke Length Control
Disconnect Switch
Manual Back Gauges
Complete Electrical Controls
Includes All Available Manuals and Standard
Equipment
|
|
Ad # 8860 | Press Brakes (Hydraulic) |
2007 |
Accurpress Accel |
515012 |
Good |
sold |
Photo /
More Info. |
150 Tons: Tonnage 150 Tons
Length of Bed 144"
Distance Between Frames 130"
Bed Height 34"
Length of Ram Stroke 10"
Ram Open Height 26"
Throat Depth 8"
Ram Closed Height 16"
Approach Speed 480
Bend Speed 24-48
Return Speed 320
Motor 20HP
Approximate Dimensions 161"L-R x 78"F-B x 100"H
Equipped With ETS3000 Supreme Backguage
12.1' TFT Active Matrix Screen Graphical Display
Bend Simulation with Interference and Tool Overload Checking
3000 Programs- 50 Steps Each Program
Off Line Programming and Program Storage Via: RS323 Link or 3.5 Diskette
Premium Servo Controlled CNC Backgauge
6 Axis: Y1/Y2, X, R, & Z1/Z2,
Optional R and Z1/Z2 Axis Offer Productivity Boost
Wila NSCL II New Standard Clamping
Lazer Safe Safety Guarding
Front Sheet Support Fixtures
Standard Ram Open Height is 18"
Increased by 8" for total of 26"
|
|
Ad # 8862 | Press Brakes (Hydraulic) |
1989 |
Adira |
QH 150-40 |
Good |
sold |
Photo /
More Info. |
165 Tons: Capacity 165 Tons
Length of Bed and Ram 13'3.4"
Distance Between Housings 10'2"
Stroke 4"
Open Height 3.4"
Open Height with Punch Holder 9.25"
Throat Clearance 17.72"
Back Guage Speed X Axis 45 Inch per Min
Main Motor Hoursepower 12HP
Oil Tank Capacity 26.5 US Gallons
Equipped With
Adira 24" Motorized Back Guage
Variable Tonage
4 Way Lower V-Die
Swing Down 4-Way Die Lifter
Sectional Ram Clamps
|
|
Ad # 7489 | Press Brakes (Hydraulic) |
1989 |
Adira |
QH 150-40 |
Very Good |
sold |
Photo /
More Info. |
1989 Adira QH 150-40 Hydraulic Press Brake: Adira 165 ton x 13'
Length Bed & Ram 13'3.4"
10'-2" between housings
Stroke 4"
24" Motorized Back Gage
Full Machine Specifications
Capacity 165 Tons
Length of Bed and Ram 13'3.4"
Distance Between Housings 10'2"
Stroke 4"
Open Height 3.4"
Open Height with Punch Holder 9.25"
Throat Clearance 17.72"
Back Guage Speed X Axis 45 Inch per Min
Main Motor Hoursepower 12HP
Oil Tank Capacity 26.5 US Gallons
Equipped With
Adira 24" Motorized Back Guage
Variable Tonage
Swing Down 4-Way Die Lifter
Sectional Ram Clamps
no tooling included |
|
Ad # 3517 | Press Brakes (Hydraulic) |
1996 |
Adira |
QHD-7025 |
Good |
Sold |
Photo /
More Info. |
1996 ADIRA DOWN ACTING 77 TON X 8' HYDRAULIC PRESS BRAKE : THIS IS A VERY RARE DOWNACTING MODEL TONNAGE CAPACITY: 77 TONS-adjustable... |
|
Ad # 8291 | Press Brakes (Hydraulic) |
|
Ajial |
502 M |
Good |
sold |
Photo /
More Info. |
50 Ton x 7 ft Hydraulic Press Brake: 7 FT. X 12 GA. AJIAL HYDRAULIC PRESS BRAKE
Tonnage Capacity:50 Tons
Bending Capacity:7" x 12 GA Mild Steel
Overall Length of Bed & Ram:84"
Distance Between Housings:80"
Stroke:3.9"
Open Height:11.8"
Throat Depth:15.7"
Width of Bed:3.9"
Floor To Top Of Bed:32 3/4"
Speeds Approx:1.9"/Sec. - Approach
.29"/Sec. - Press
1.8"/Sec. - Return
Equipped With:
Electric Foot Switch
3" High Die Rail
Sectional Ram Die Clamps
Selector Switch For Start - Stop
Speed Adjustment Control
Tonnage Control With Pressure Gauge
Emergency Stop Button
Hydraulic Pump Driven By
5 1/2 HP 1700 RPM 440/3/60 Motor
|
|
Ad # 6906 | Press Brakes (Hydraulic) |
1984 |
ALLSTEEL |
70-6 |
Very Good |
sold |
Photo /
More Info. |
70 TON X 6' ALLSTEEL HYDRAULIC PRESS BRAKE: 70 TON X 6' ALLSTEEL HYDRAULIC PRESS BRAKE
TONNAGE ......................... 70 TONS
OVERALL LENGTH OF BED & RAM ..... 72´´
DISTANCE BETWEEN HOUSINGS ....... 54´´
CAPACITY ........................ 6 X 3/16´´ MILD STEEL
STROKE .......................... 6´´ MAXIMUM
SHUT HEIGHT (SDAU) .............. 15´´
CLOSED HEIGHT ................... 9´´
THROAT .......................... 8´´
RAM SPEED APPROACH .............. 130 IPM
RAM SPEED PRESSING .............. 60 IPM
RAM SPEED RETURN ................ 130 IPM
FLOOR TO BED .................... 32´´
ELECTRIC FOOT TRIP .............. YES
MOTOR ........................... 20 HORSEPOWER |
|
Ad # 12864 | Press Brakes (Hydraulic) |
|
Allsteel |
135-10 |
Good |
sold |
Photo /
More Info. |
135 x 10ft: Allsteel 135--10 hyd press brake
Automec CNC99B 2 Axis Backgauge
135 ton x 10 ft
This brake comes with some tooling |
|
Ad # 13221 | Press Brakes (Hydraulic) |
1986 |
Amada |
FBD5020 |
Good |
SOLD |
Photo /
More Info. |
55 ton: (1986)
50 Ton Amada Upacting Press Brake
Model# FBD5020
Table Length: 78.7"
Between Columns: 66.9"
Throat Depth: 15.75"
Stroke: 3.94"
Open Height: 14.57"
3-Axis CNC Backgauge
|
|
Ad # 13242 | Press Brakes (Hydraulic) |
1993 |
Amada |
HFBO |
Good |
sold |
Photo /
More Info. |
235 Ton x 14ft: Amada hydraulic press brake
Model HFBO
235 Ton
Year 1993
Control Amada Promecam
48" Back gauge
no pit required
light curtain
14ft bed
12ft Between Sides
Voltage 220/440 Wired 440
Stroke 7"
|
|
Ad # 5088 | Press Brakes (Hydraulic) |
|
Amada |
RG-25 |
Very Good |
SOLD |
Photo /
More Info. |
25 Ton Hydraulic Press Brake: SPECIFICATIONS
TONNAGE -------------------------- 25 TONS
TABLE LENGTH --------------------- 47.3"
MAXIMUM BEND LENGTH -------------- 49.3"
DISTANCE BETWEEN UPRIGHTS -------- 40.2"
THROAT DEPTH --------------------- 7.88"
LENGTH OF STROKE ----------------- 3.94"
OPEN HEIGHT ---------------------- 14.58"
POWER REQUIREMENTS --------------- 3 KVA, 230 VOLT/3 PHASE
HYDRAULIC OIL RESERVOIR ---------- 6.86 GALLONS
WEIGHT (APPROX.) ----------------- 3,100 LBS.
CONTROL -------------------------- D-9 NC, S/N# FN66546
--------------------------------------------------------------------------------
EQUIPPED WITH
- CNC BACKGAUGE
|
|
Ad # 11234 | Press Brakes (Hydraulic) |
1998 |
Amada |
NC9-EX2-P |
Very Good |
sold |
Photo /
More Info. |
35 tons x 48": Year: 1998
Capacity: 35 Tons
Table length: 47.3 in
Max bending length: 49.3 in
Distance between upringhts: 40.2 in
Throat depth: 7.88 in.
Length of stroke: 3.94 in
Open height: 14.58 in.
|
|
Ad # 14408 | Press Brakes (Hydraulic) |
1989 |
Amada |
1040E |
Good |
sold |
Photo /
More Info. |
100 ton x 13ft: Amada # 1040E hyd press brake
tonnage: 100us
die length: 13ft (157.5")
dist between housings: 10.5ft(129.9")
stroke: 3.94"
2 axis cnc back gage
some tooling included
riging/loading fee approx: $1500.00 |
|
Ad # 9015 | Press Brakes (Hydraulic) |
1999 |
Amada |
FBDIII 8025FS |
Excellent |
Sold |
Photo /
More Info. |
8' x 88 Tons: SPECIFICATIONS:
Capacity - Tonnage 88 Tons
Bending Length 98.6"
Overall Length of Bed and Ram 98.4"
Distance between Housings 86.6"
Stroke - Maximum 5.91"
Height - Open 16.54"
Throat Depth 15.8"
Backguage Travel 19.7"
Floor to Top of Bed 37.25"
Speeds - Rising 3.03 IPS
- Bending 0.32 IPS
- Lowering 3.55 IPS
Bending Capacity - Mild Steel 6'6" x 3/16"
Approximate Overall Dimensions 143" L-R x 56" F-B x 97" H
Approximate Weight 13,669 Lbs.
EQUIPPED WITH:
Amada Model NC9-FS, 8 Axis CNC Gauging System
Power Backguage w/19.7" of Movement
Built-In Hydraulic System to Increase the Rigidity of the Lower Beam
by Evenly Distributing the Stress of Bending - thus maintaining Parallelism
Punch Holders (12)
Pressure Adjustment with Gauge
10.1 HP AC Main (Pump) Drive Motor
Electrical Controls
|
|
Ad # 6445 | Press Brakes (Hydraulic) |
|
Atek Bantam |
B212 |
Excellent |
Sold |
No Photo /
More Info. |
12 Ton x 24" Bed Hydraulic Press Brake: LIKE NEW. Used very little. Has the stand and dies. This will fit in a pic... |
|
Ad # 8280 | Press Brakes (Hydraulic) |
1993 |
Atlantic |
HD165X10 |
Good |
Sold |
Photo /
More Info. |
165 Ton x 10 ft Atlantic Hydraulic Press Brake: USED 10 FT. X 1/4" ATLANTIC HYDRAULIC PRESS BRAKE
Tonnage Capacity:165 Tons
Bending Capacities:10' x 1/4" Mild Steel
8' x 5/16" Mild Steel
Overall Length of Bed & Ram:10'2"
Distance Between Housings:98"
Stroke:6"
Open Height:16.25"
Closed Height:10.25"
Throat Depth:9-3/4"
Width of Bed:3-1/8"
Floor to Top of Bed:34"
S.P.M. Approx.:150"/Minute Rapid Approach
15"/Minute Press
165"/Minute Rapid Return
EQUIPPED WITH:
32" Pendant Operated Power Back Gauge With Control & Hand Wheel For Fine Positioning With Readout
3-1/2" High Two Die Rails
Electric Foot Switch
Ram Depth Pendant Control With Readout
Ram Adjustment Control
*Triad Safety Light Control
Pushbuttons For Start - Stop
Tonnage Control & Pressure Gauge
Sectional Ram Die Clamps
20 HP 220/440/3/60 Motor
|
|
Ad # 8283 | Press Brakes (Hydraulic) |
1993 |
Atlantic |
HD165X10 |
Good |
sold |
Photo /
More Info. |
165 Tons x 10 ft Atlantic Hydraulic Press Brake: Tonnage Capacity:165 Tons
Bending Capacities:
10' x 1/4" Mild Steel
8' x 5/16" Mild Steel
Overall Length of Bed & Ram:10'2"
Distance Between Housings:98"
Stroke:6"
Open Height:16.25"
Closed Height:10.25"
Throat Depth:9-3/4"
Width of Bed:3-1/8"
Floor to Top of Bed:34"
S.P.M. Approx.:150"/Minute Rapid Approach
15"/Minute Press
165"/Minute Rapid Return
EQUIPPED WITH:
32" Pendant Operated Power Back Gauge
With Control & Hand Wheel For
Fine Positioning With Readout
3-1/2" High Two Die Rails
Electric Foot Switch
Ram Depth Pendant Control With
Readout
Ram Adjustment Control
*Triad Safety Light Control
Pushbuttons For Start - Stop
Tonnage Control & Pressure Gauge
Sectional Ram Die Clamps
20 HP 220/440/3/60 Motor
|
|
Ad # 8590 | Press Brakes (Hydraulic) |
90 |
BANTAM |
B412 |
Good |
sold |
No Photo /
More Info. |
4FT. 12 TON: 4 ft x 12 ton
IR 1 AND 3/4 STROKE |
|
Ad # 14036 | Press Brakes (Hydraulic) |
? |
Bantam |
B 412 |
Good |
sold |
Photo /
More Info. |
4ft. x 12 ton 18 gauge mild steel: Bantam Press Brake (Pneumatic)
Model: B 412
Capacity: 4ft x 12 Ton
Tooling Space (in.)8-7/8
Ram Stroke (in.)0 - 1-7/8
Bed Adjustment (in.)2
Throat Depth (in.)5-3/4
Shut Height (in.)7-1/2
Bed and Ram Thick (in.)1-1/4
Ram Height (in.)9-7/8
Bed Width (in.)48
Between Housings (in.)48-1/4
Back Gauge Depth (in.)0 - 18
Maximum Free Air (ft³)2.2
Maximum Speed @ Full Stroke (SPM)30
Tooling pictured included
Users Manual Included |
|
Ad # 14928 | Press Brakes (Hydraulic) |
? |
Bantam Brake |
B212 |
Good |
sold |
Photo /
More Info. |
12 ton x 24" Pneumatic : Bantam Brake # B212 pneumatic press brake
press brakes offer versatility and
economy. This machine is a conveniently sized 2
foot 12 ton model. They perform numerous
prototyping and production press brake functions
including bending, flanging, hemming, flattening,
staking, box forming and more. Each machine uses
standard American-style, 5150 steel press brake
tooling. A 90 deg top punch and 3/4 inch bottom
vee die included.
Additional features include adjustable
stroke depth control, adjustable die spacing,
tamper proof speed control valve, complete modular
FRL unit with OSHA lockout, and a variable tonnage
control. No need to worry about wiring, simply
connect an air line. The conditioned air supply,
standard, gives years of trouble fee service. Buy
a press brake Made in America by experienced
craftsmen
Adjustable Stroke Depth Control is
provided by the screw stop for precise
repeatability. Raise the adjustable bed and
shorten the ram stroke to maximixe productivity
while reducing air consumption and minimizing the
pinch point for safer operation.
Adjustable Die Space handles numerous
tool sets and reduces or eliminates the pinch
point. Per OSHA guidelines, a die space gap of 1/4
inch or less is not a pinch point and provides the
safest operation method. Loosen the bed and raise
or lower it with the large bed elevating screws.
Leveling of bed to ram is easily accomplished
using this feature
Ram Speed Control via an infinitely
variable valve allows instant adjustment of air
flow to the dual cylinders. A minimum setting
creates a creep mode for setup, or select any
other position to safely match ram speed with your
job.
Safety Hooded Foot Pedal controls all ram
motion. Fully depress control pedal for down
stroke. Slightly release pedal to stop advancing
the ram. Completely release pedal at any time and
the counter-balanced ram automatically retracts to
the top of the stroke. For added safety, the ram
retracts if air supply is removed.
Modular FRL Unit is standard on all models
to condition air supply to pneumatic components
for long life. The unit consists of an adjustable
filter/regulator module with pressure gauge,
adjustable flow lubricator module and a three-way
lockable shut-off valve. The valve is vented to
relieve downstream pressure in the off position
per OSHA guidelines. Keyed padlock and lockout tag
are included.
Variable Tonnage Control provided through
the modular filter/regulator/lubricator unit
delivers twelve or twenty-four tons of ram force
to form up to 3/8 or 1/2 inch at maximum pressure.
Lower the pressure to suit the job, reduce air
consumption and preserve tooling.
Type: pneumatic
•Capacity: 12 ton
•Working Length (inches): 24
•Strokes: 30 strokes per minute
•Air Pressure (psi): 90
•Weight (pounds): 940
•Dimensions (LxWxH): 32 x 40 x 25
12 tons at 85 PSI, max 110psi
24" width
22" between housings
foot pedal actuated
1-3/4" stroke
14" manual back gage
5" throat
note: tooling shown included |
|
Ad # 13629 | Press Brakes (Hydraulic) |
2006 |
Baykal |
1254 |
Excellent |
sold |
Photo /
More Info. |
4ft x 38 ton: Baykal hyd. press brake w/ cnc back gage
4’ x 38 ton
X/R gauge
Delem da 66 control
no tooling included
|
|
Ad # 10534 | Press Brakes (Hydraulic) |
|
Bentenbender |
8' x 70 ton |
Very Good |
Sold |
Photo /
More Info. |
Remanufactured Betenbender 8' x 70 Ton Press Brake: All New Electrical including 10HP Motor, Footswitch, Enclosure & Switch Bra... |
|
Ad # 10533 | Press Brakes (Hydraulic) |
80's |
Bentenbender |
BSI 6' x 95 ton |
Very Good |
sold |
Photo /
More Info. |
Betenbender/BSI 6' x 95 Ton PRESS BRAKE: All New Electrical including 15HP Motor, Footswitch, Enclosure & Switch Bra... |
|
Ad # 6412 | Press Brakes (Hydraulic) |
1983 |
BERTSCH |
175 x 10 |
Good |
SOLD |
No Photo /
More Info. |
175 TON X 10' BERTSCH HYDRAULIC BRAKE: 175 TON X 10' BERTSCH HYDRAULIC BRAKE:
CAPACITY ......................... 175 TON
OVERALL LENGTH OF BED ............ 10'
DISTANCE BETWEEN HOUSINGS ........ 8'6´´
STROKE ........................... 10´´
OPENING .......................... 17´´ MAXIMUM7´´ MINIMUM
CNC BACKGAUGE .................... YES |
|
Ad # 9154 | Press Brakes (Hydraulic) |
1983 |
Bertsch |
175-12 |
Good |
sold |
Photo /
More Info. |
175 Ton 12 foot: Specifications
Capacity: 175 Tons
Approach ram speeds (in/min): 245/88/29
Return ram speeds (in/min): 225/52
Overall bend length: 12'
Distance between housings: 10'6"
Platen height above floor: 36"
Bed projection below floor: 0"
Stroke length: 10"
Open height: 17"
Closed height: 7"
Throat depth: 8"
Platen width: 8"
Motor: 30 hp
Approximate shipping weight: 24,500 lbs.
Overall dimensions: 150" x 53" x 130"
Equipped With:
PC Ram control
no back gage
In plant under power @ customer's facility
|
|
Ad # 8286 | Press Brakes (Hydraulic) |
1993 |
Betenbender |
6ft x 95 Ton |
Good |
Sold |
Photo /
More Info. |
95 Ton x 6 ft Betenbender Hydraulic Brake: Tonnage Capacity:95 Tons
Bending Capacities:6' x 3/16" Mild Steel
5' x 1/4" Mild Steel
Overall length of Bed & Ram:72-1/2"
Distance Between Housings:60-1/2"
Stroke:8"
Open Height:14"
Closed height:6"
throat Depth:8"
Width of Bed:4"
Floor to Top of Bed:37"
Speeds Approx.:50"/Min. - Press
114"/Min. - Rapid Approach
168"/Min. - Return
EQUIPPED WITH:
24" Front Operated Manual Back
Gauge w/Readout Via Hand Wheel
Bed Machined For Angles - Front & Back
3-1/4" High 4-Way Die Rail
Free Standing Control w/Electric
Foot Switch & Emergency Stop Button
Selector Switch for Run - Jog;
Push - Pull Button For Start - Stop
Pushbutton For Up - Down
Tonnage Indicator
Hand Wheel Control For Depth of
Bed Adjustment
Sectional Ram Die Clamps
Hydraulic Pump Driven by
20 HP 1760 RPM 230/460/3/60 Motor
|
|
Ad # 13244 | Press Brakes (Hydraulic) |
1997 |
Betenbender |
50T x 12ft |
Good |
sold |
Photo /
More Info. |
50 ton x 12ft bed: Betenbender 50 Ton capacity x 12 ft bed
manual clamp style back gage
175 hrs on machine
no tooling included
tonnage control |
|
Ad # 14618 | Press Brakes (Hydraulic) |
1997 |
Betenbender |
50T x 12ft |
Good |
sold |
Photo /
More Info. |
12ft x 50 ton : Betenbender Hydraulic press brake
50 Ton capacity x 12 ft bed
manual clamp style back gage
approx:175 hrs on machine(on time)very low
no tooling included
has tonnage control
note:can be upgraded easily to a 70ton
capacity for approx: $1500.00
rigging/loading onto flat bed truck
fee:$1750.00
|
|
Ad # 10750 | Press Brakes (Hydraulic) |
1992 |
Betenbender |
14 x 120" |
Good |
sold |
Photo /
More Info. |
14' x 120 Ton capacity: Betenbender press brake,
14\GA x 120 ton capacity,
new 1992,
with Hurco single axis BG.
|
|
Ad # 11235 | Press Brakes (Hydraulic) |
2006 |
Betenbender |
6-50T |
Very Good |
sold |
No Photo /
More Info. |
50 ton x 6ft: 50 Ton x 6ft
programable back press
** MADE IN THE U.S.A. **
BETENBENDER HYDRAULIC PRESS BRAKE QUOTE
Model 6' x 50 Ton
SPECIFICATIONS:
Maximum Tonnage ......................... 50 Tons
Maximum Bending Length .................. 72 inches
Maximum Stroke Length ................... 8 inches
Open Height ............................. 14 inches
Closed Height . . . . . . . . . . . . . . 6 Inches
Throat Depth ............................ 8 inches
Distance Between Housings ............... 54-1/2 inches
Ram Repeatability ....................... +/- .002"
Hydraulic Pressure ...................... 2500 lbs.
Hydraulic Oil Capacity .................. 31 Gallons
Machine Weight .......................... 6,800 lbs.
Machine Dimensions:
Overall Height ................. 104 inches
Overall Length ................. 87 inches
Overall Width .................. 45 inches
Bed Height .............................. 28 Inches
Motor Horsepower ........................ 10
ACCURACY
Every Betenbender machine is thoroughly inspected and tested.
1.Parallelism is maintained between bed and ram or at preset
angle by using precision automatic leveling controls. Parallelism
is maintained at +/-.002" in low speed.
2.The ram bottom reversal point is controlled by precise limit
switches referenced off the bed. This isolates housing deflections, which can interfere with its accuracy.
Enhanced Productivity
Return speeds and rapid advance facilitate high cycle rates.
Operator control is simplified by slow and press speed, thus work
spoilage is avoided. Rapid advance with automatic change. The point
of speed change is fully adjustable by electric limit switch.
Micrometer type tilt adjustment is graduated in .001" increments
permitting ram tilt adjustments up to 1/2" in either direction.
ELECTRO MECHANICAL STROKE CONTROL is bed referenced.
Bottom limit is manually set with a lead screw and displayed by an mechanical readout calibrated in .001" increments.
VERSATILITY
BETENBENDER'S press brakes have long full tonnage strokes,
adjustable length and selectable speed combinations, adjustable
height for short stroke, 2-speed standard and the optional 3- speed for adjustable low speed to prevent whip.
ELECRICAL EQUIPMENT
Meets requirements of NFPA no.79, JIC and construction requirements of the latest ANSI B-11.3 Standards. Includes drip-proof, continuous duty 45 degree Celsius ambient hydraulic pump motor wired for 230 or 460 volt, 3 phase 60 hertz.
DEPENDABILITY
Self-lubricating replaceable non-metallic ways prevent galling and provide long service life. Cylinders are high-strength, all steel. To minimize wear and provide a superior oil seal, inside
cylinder surfaces are honed to a mirror finish.
Compact, precision machined aluminum manifold incorporates off-the shelf components, minimizes piping and consolidates "O" ring
mounted valves.
Quiet, vane type constant volume pumps. In keeping with good hydraulic design practice, these energy efficient pumps are located outside the reservoir.
Filtration of contaminants as small as 10 microns is accomplished
with intake and discharge filters. A built-in magnetic trap and air breather filter provide added protection against contaminants. Reservoir of large capacity facilitates effective heat dissipation. A fluid level gauge is provided.
CONTROL
Main Control Cabinet - NEMA 12 enclosures mounted in the right housing containing: magnetic non-reversing motor starter and 120 volt circuit.
Main motor START button and STOP button are illuminated.
RAM UP and RAM DOWN buttons.
RUN/JOG Switch.
Fusible disconnect.
MAINTENANCE
Clevis mounted cylinders eliminate cylinder binding by reducing the possibility of oil leaks from cylinder binding. (Pins & bushings do not rotate under load, this reduces excessive wear)
STANDARD EQUIPMENT
Clamp Type Backgauge-Manual American-Made Motor
Adjustable x,y,z All Steel Construction
Depth Stop w/Readout Two Speed Ram
Hour Meter All Hydraulic Fluid Included
Three Position Foot Pedal Disconnect Switch
NEMA Electrics Bottom Time Delay
BET650T
Standard Press Brake Equipment
Clamp Type Backgauge� Manual Adjustable X, Y, & ZAmerican Made Motors
Two Speed RamHour Meter
Bottom Time DelayNema Electrics
Three Position Foot PedalAll Hydraulic Fluids Included
Depth Stop w/Digital ReadoutDisconnect Switch
Three Speed (95T and Larger)All Steel Construction
|
|
Ad # 8069 | Press Brakes (Hydraulic) |
2002 |
Betenbender |
6-50T |
Very Good |
Sold |
Photo /
More Info. |
50 Ton x 6 ft bed: 50 ton capacity
6 ft bed , 65" between housings
power backgage with digital readout display speed control on bacgage
no tooling included
|
|
Ad # 13290 | Press Brakes (Hydraulic) |
1984 |
Brakemaster |
10ft x 150 ton |
Good |
sold |
Photo /
More Info. |
150 ton x 10 ft: Brake Master Hyd. Press brake
Tonnage: 150ton
bed length: 10ft
tonnage/pressure control
light curtain
clamp style manual backgage
no tooling included
brake can not be moved until new unit arrives in
july..but can be inspected |
|
Ad # 9161 | Press Brakes (Hydraulic) |
80's |
BSI |
6 x 95 Ton |
Good |
SOLD |
Photo /
More Info. |
95 Tons x 6 ft: 6 ft x 95 ton
New Hydraulic system |
|
Ad # 14212 | Press Brakes (Hydraulic) |
1960 |
Chicago |
SB 103 |
Fair |
sold |
Photo /
More Info. |
10ft. x 20 Gauge or 5ft. x 18 Gauge: Chicago Hydraulic Press Brake
Model: SB 103
Capacity:
10ft. x 20 Gauge (5/8")
5ft. x 18 Gauge
25 Strokes per min
2" Stroke
|
|
Ad # 15251 | Press Brakes (Hydraulic) |
|
chicago |
|
Good |
sold |
Photo /
More Info. |
15 ton x 48": chicago 15 ton x 40" hyd press brake
light curtain
dies in machine |
|
Ad # 8420 | Press Brakes (Hydraulic) |
1960 |
CHICAGO DRIES & KRUMP |
200HV10 |
Good |
sold |
Photo /
More Info. |
200 Ton: BENDING CAPACITY:1/4" X 10'
BEN & RAM OVERALL LENGTH:174"
DISTANCE BETWEEN HOUSINGS:124"
THROAT DEPTH:8"
STROKE:12"
OPEN HEIGHT:17"
CLOSED HEIGHT:5"
NO PIT REQUIRED
SPEEDS:ADVANCE 135"/ MIN
PRESSING 30"/ MIN
RETURN:145"/ MIN
MOTOR:(2)15 HP 1800 RPM
FRAME: 284U, 3 PAHAE, 60 CYC.220/440 VOLT
DOUBLE END HYDRAULIC PUMP MOTOR
EQUIPPED WITH:
24" HORN - RIGHT SIDE
FULL LENGTH SECTIONAL RAM DIE CLAMPS
FULL LENGTH T-SLOTTED BED
FOOT PEDAL CONTROL
no back gage
|
|
Ad # 10537 | Press Brakes (Hydraulic) |
1973 ? |
Cincinatti |
CB135 |
Good |
sold |
Photo /
More Info. |
135 Ton, 10 ft. OAL: Machine includes bottom die block and misc operating
tools.
no tooling included
Machine capacity is 8 ft. between housings, 10 ft.
overall length of bed. the Hurco back gauge needs to
be fixed but all componants are in place. Good
rugged machine. |
|
Ad # 11357 | Press Brakes (Hydraulic) |
1987 |
Cincinnati |
CB-135-10 |
Very Good |
sold |
Photo /
More Info. |
Cincinnati CB13510 :12' x 135 Tons Hurco Backgauge: Cincinnati CB-135-10
12' x 135 Tons
Hurco Backgauge-single axis
Hydraulic Press Brake
Hurco AB5S7 CNC Backgauge-single axis-front to back positionioning
Has factory switches on side for 3 different ram depths adjustments
Work Light
both Manuals Included-operator & maint
Miscellaneous Dies/tooling Included
1 -bullnose @ 12' in 2 6' Sections
1 -1-1/2" bottom die in 2 6' Sections
Hurco control-was 20K new
was repainted
|
|
Ad # 14104 | Press Brakes (Hydraulic) |
1990s |
Cincinnati |
230CBIIx10 |
Good |
sold |
Photo /
More Info. |
230 Ton 10ft : Cincinnati 230 Ton Press Brake in excellent
condition
230CBIIx10
12 Foot Bed Length
16" Stroke
|
|
Ad # 11076 | Press Brakes (Hydraulic) |
|
Cincinnati |
2 - 30 |
Very Good |
sold |
Photo /
More Info. |
6 ft -- 30 TON : SERIAL ............................ 28621
MODEL ............................. 2-30
CAPACITY .......................... 30 TON
OVERALL LENGTH OF BED AND RAM ..... 72"
DISTANCE BETWEEN HOUSINGS ......... 62"
STROKE OF RAM ..................... 2-1/2"
POWER RAM ADJUSTMENT .............. 4"
DIE SPACE, SDAU ................... 12"
DEPTH OF THROAT ................... 9"
POWER RAM ADJUSTMENT .............. YES
ELECTRIC FOOT PEDAL ............... YES
BACK GAUGE ........................ 24" MANUAL
DRIVE MOTOR, HORSEPOWER ........... 3
|
|
Ad # 7579 | Press Brakes (Hydraulic) |
1980 |
CINCINNATI |
230CB12 |
Very Good |
Sold |
Photo /
More Info. |
230 TON X 14' CINCINNATI HYDRAULIC PRESS BRAKE With CNC Back Gauge: 230 TON X 14' CINCINNATI HYDRAULIC PRESS BRAKE
CAPACITY ......................... 230 TON
OVERALL LENGTH OF BED AND RAM .... 14'
DISTANCE BETWEEN HOUSING ......... 12'6´´
STROKE OF RAM .................... 10´´
OPEN HEIGHT ...................... 17´´
CLOSED HEIGHT .................... 7´´
DEPTH OF THROAT .................. 8´´
RAM SPEED HIGH ................... 101 IPM
RAM SPEED MEDIUM ................. 49 IPM
RAM SPEEDS LOW ................... 14 IPM
RAM SPEEDS RETURN ................ 95 IPM
HURCO AUTOBEND 20C CNC BACK GAUGE. YES
MILLED & DRILL FOR ANGLES ........ YES
ELECTRIC FOOT TRIP ............... YES
MOTOR ............................ 30 HORSEPOWER |
|
Ad # 6406 | Press Brakes (Hydraulic) |
|
CINCINNATI |
300 X 14 |
Very Good |
Sold |
Photo /
More Info. |
300 TON X 14' CINCINNATI HYDRAULIC PRESS BRAKE: 300 TON X 14' CINCINNATI HYDRAULIC PRESS BRAKE
CAPACITY ........................... 300 TON
OVERALL LENGTH OF BED & RAM ........ 14'
DISTANCE BETWEEN THE HOUSINGS ...... 12'6´´
STROKE ............................. 12´´
OPEN HEIGHT ........................ 22´´
CLOSED HEIGHT ...................... 10´´
THROAT ............................. 11´´
RAM SPEED FAST PRESS ............... 77 IPM
RAM SPEED FULL TONNAGE PRESS ....... 37 IPM
RAM SPEEDS RETURN .................. 80 IPM
MILLED & DRILLED FOR ANGLES ........ YES
ELECTRIC FOOT TRIP ................. YES
MOTOR .............................. 40 HORSEPOWER |
|
Ad # 5743 | Press Brakes (Hydraulic) |
1991 |
CINCINNATI |
230AF-16 |
Excellent |
SOLD |
Photo /
More Info. |
18' x 230 Ton CINCINNATI Auto Form Hydraulic Press Brake: Rated tonnage at bottom of stroke 230 ton
Rated bending capacity 18' x 10 Ga.
Overall length of bed and ram 18'
Distance between housings 16'6"
Length of stroke, adjustable up to 10"
Open height 17"
Closed height 7"
Throat depth 8"
Speed, approach 155 I.P.M.
slow form 3.4 I.P.M.
medium form 6.8 I.P.M.
rapid form 17 I.P.M.
return 175 I.P.M.
Depth x thickness of pit required 15" x 6"
Length of pit required 16'6"
|
|
Ad # 5746 | Press Brakes (Hydraulic) |
1977 |
CINCINNATI |
Series 135 CB x 8' |
Very Good |
Sold |
Photo /
More Info. |
135 Ton CINCINNATI Series 135 CB x 8’ Hydraulic Press Brake, with 2-ax: Flush floor design
Capacity at bottom 135 Tons
Overall length of bed and ram 10"
Distance between housings 8' 6"
Max. stroke 8"
Throat depth 7"
Die space 12"
|
|
Ad # 995 | Press Brakes (Hydraulic) |
90's |
custom |
40 Ton |
Needs Work |
Sold |
Photo /
More Info. |
Small Press Brake 40 Ton x 42": 42" bed
tee-slotted table;
hyd. unit,
foot switch;
fingers in top rail
2 avaiable
some tooling shown |
|
Ad # 11584 | Press Brakes (Hydraulic) |
|
custom built |
|
Good |
sold |
Photo /
More Info. |
200 ton ..30ft: 18 hydraulic cylinders...9 and 9 on each actuator panel...4 sets of dyes ... |
|
Ad # 8282 | Press Brakes (Hydraulic) |
1982 |
Darley |
EHP.110.31/25 |
Good |
sold |
Photo /
More Info. |
121 Ton x 10 ft Darley Hydraulic Press Brake: USED 10 FT. X 3/16" DARLEY HYDRAULIC PRESS BRAKE
Capacity: 121 tons
Bending Capacities:
122" x 3/16" Mild Steel
8' x 1/4" Mild Steel
Overall Length of Bed & Ram:122"
Distance Between Housings:100.3"
Stroke:5.9"
Open Height:14.7"
Closed Height:4.8"
throat Depth:9.8"
Width of Bed:6.25"
Floor to Top of Bed:35.5"
Speeds Approx.:3.9"/Second - Approach
.30"/Second - Press
2.5"/Second - Return
EQUIPPED WITH:
5.5" High Die Rail
Free Standing Control w/Dual Palm
Buttons For Run - Emergency Stop Button
Electric Foot Switch
Pushbuttons For Start - Stop
Sectional Ram Die Clamps
T-Slots in Front - Back & Top of Bed
Hydraulic Power Unit
Driven by 10 HP Motor
|
|
Ad # 5495 | Press Brakes (Hydraulic) |
1974 |
DIACRO |
16-96 |
Good |
SOLD |
Photo /
More Info. |
35 TON, 8' DIACRO HYDRA-MECHANICAL PRESS BRAKE: LENGTH OF BED & RAM ----------------------- 96"
DISTANCE BETWEEN HOUSINGS ----------------- 62"
CAPACITY -------- ( MILD STEEL ) ---- 96" X 16 GA.
STROKE OF RAM ----------------------------- 2"
SHUT HEIGHT RAM UP, STROKE DOWN ----------- 9"
RAM ADJUSTMENT ---------------------------- 3"
THROAT CLEARANCE FROM CENTER OF DIES ------ 9"
MAIN DRIVE MOTOR ------------------- 3 HP A.C.
EQUIPPED WITH ---
HURCO AUTOBEND IV CNC BACK GAUGE WITH 24" RANGE
STROKE ADJUSTMENT
COMPLETE HYDRAULIC SYSTEM
LOWER & TOP DIE HOLDERS
FOOT PEDAL CONTROL |
|
Ad # 13696 | Press Brakes (Hydraulic) |
? |
Diacro |
16-72 |
Good |
sold |
Photo /
More Info. |
25 Ton x 72": Diacro Hydra Power Press Brake
Model: 16-72
CNC Diacro Back Gauge
Length of Bed 72"
Distance between housings 62"
Capacity in mild steel (6') 16 ga.
Stroke 2"
Ram Adjustment 3"
Throat clearance 9"
Horsepower 3hp
Floor space 44" X 72" X 92" high
Weight 5,000 lbs
|
|
Ad # 5003 | Press Brakes (Hydraulic) |
1966 |
DIACRO |
#16-96 |
Good |
Sold |
Photo /
More Info. |
35-Ton DIACRO #16-96 Hydra-Mechanical Press Brake, S/N-660117465, Used: Hurco IV CNC back gauge
Manual Shut Height Adjust.
Adjustable Stroke
Die Rail 2-1/2" x 3" Hight x 8' |
|
Ad # 5827 | Press Brakes (Hydraulic) |
|
DIACRO |
16-72 |
Very Good |
Sold |
Photo /
More Info. |
72" x 16 Ga. 25 Ton Diacro Hydra-Mechanical Press Brake: LENGTH OF BED 72”
CLEARANCE BETWEEN HOUSING 62”
CAPACITY MILD STEEL 16 GA
STROKE OF RAM 2”
RAM ADJUSTMENT 3”
SHUT HEIGHT 9”
DIE HOLDER HEIGHT 3”
THROAT CLEARANCE 9”
EQUIPPED WITH:
NEW SEALS IN HYDRAULICS
NEW BEARINGS
POWER RAM ADJUSTMENT
FRONT OPERATED MANUAL BACK GAUGE
STROKE ADJUSTMENT
NEW PAINT |
|
Ad # 5489 | Press Brakes (Hydraulic) |
1977 |
DIACRO |
55-10 |
Good |
Sold |
Photo /
More Info. |
55 TON DIACRO HYDRA-MECHANICAL PRESS BRAKE: LENGTH OF BED & RAM ----------------------- 120"
DISTANCE BETWEEN HOUSINGS ----------------- 102"
CAPACITY ----- ( MILD STEEL ) ------ 120" X 14 GA.
STROKE OF RAM ----------------------------- 3"
SHUT HEIGHT RAM UP, STROKE DOWN ----------- 12"
RAM ADJUSTMENT ---------------------------- 4"
THROAT CLEARANCE FROM CENTER OF DIES ------ 8"
MAIN DRIVE MOTOR ------------- 10 HP 230/460/3/60
EQUIPPED WITH ---
24" CNC BACK GAUGE ( 1 AXIS )
STROKE ADJUSTMENT
COMPLETE HYDRAULIC SYSTEM
LOWER & TOP DIE HOLDERS
FOOT PEDAL CONTROL |
|
Ad # 8290 | Press Brakes (Hydraulic) |
85 ?? |
Donewell |
H55-2500 |
Good |
Sold |
Photo /
More Info. |
55 Ton x 8 ft Hydraulic Press Brake with CNC Back Gauge: USED 6 FT. X 10 GA. DONEWELL HYDRAULIC CNC PRESS BRAKE
Capacity: 55 tons
Bending capacities:
8' x 12 ga. mild steel
6' x 10 ga. mild steel
4' x 3/16" mild steel
Overall length of bed & ram:98"
Distance between housings:80"
Stroke:4"
Open height:12-1/2"
Closed height:8-1/2"
Throat depth:10"
Width of bed:4"
Floor to top of bed:35"
Speeds approx.:4"/Sec. - approach
3/8"/Sec. - bend
2"/Sec. - return
EQUIPPED WITH:
24" Donewell model "CNC3300 PS" two axis programmable back gauge with control
Free standing control with dual
Palm buttons for run & emergency
Stop button
1" High die rail
Pushbuttons for start-stop
Sectional ram die clamps
Hydraulic pump driven by 5-1/2" HP motor |
|
Ad # 5044 | Press Brakes (Hydraulic) |
1982 |
DONWELL |
#17-1300 |
Very Good |
Sold |
Photo /
More Info. |
Hydraulic Press Brake-17 Ton x 4ft-3"in: 17 Ton x 4-3"ft
DRC Single Axis Back Gauge new in 1982
Palm & Foot Control
Includes Die Rail but no dies included
Good. POR Due to DRC in Service.
One Owner Machine.
Tonnage 17-Ton
Overall Bend Lnegth 4' - 3"
Distance Between Hsgs. 41-1/2"
Throat Depth 5-3/4"
Stroke 0>3"
Motor 230/460V/3/60 (wired 460V at present)
With: Palm & Foot Control
Includes Die Rail
|
|
Ad # 9153 | Press Brakes (Hydraulic) |
|
Dries & Krump |
150P10 Pacemaker |
Good |
Sold |
Photo /
More Info. |
12ft overall, 126 between housings x 3/16 ...150 ton: 12 FT. X 3/16" 150 Ton
DREIS & KRUMP HYDRAULIC PRESS BRAKE
Model no. 150P10 Pacemaker
Bending capacities: 12' x 3/16" mild steel
8' x 1/4" mild steel
5' x 3/8" mild steel
Tonnage capacity: 150 tons
Overall length of bed & ram: 12'
Distance between housings: 126"
Stroke: 8"
Ram adjustment: 6"
Shut height S.D.A.U.: 12"
Throat depth: 8"
Width of bed: 6"
Floor to top of bed: 35"
Speeds approx: 322"/minute - advance
41"/minute - press
230"/minute - return
EQUIPPED WITH: 24" front operated manual back gauge
via hand lever with readout and
vertical adjustment
5-1/2" high die rail
Electric foot switch
Dual palm buttons for run
Emergency stop button
Stroke length adjustment
Power ram adjustment with pu Pushbuttons for start - stop
Key selector switches for forward -
reverse; hi - stop - lo use bypass
Sectional ram die clamps
Bijur one shot oil lubrication
1/2 HP 1725 RPM 230/460/3/60 ram
adjustment motor
Hydraulic pump driven by
25 HP 1800 RPM 230/460/3/60 motor
Weight approx. 22,200#
Overall dimensions approx. 146" L-R x 62" F-B X 118" H
|
|
Ad # 13374 | Press Brakes (Hydraulic) |
2009 |
Durma |
ADS-25100 |
Excellent |
sold |
Photo /
More Info. |
Durma 8 Foot, 110 Ton CNC Press Brake w/ 5-axis Backgauge : Durma hydraulic press brake
Durma 8 Foot, 110 Ton CNC Press Brake w/ 5-axis Backgauge
# AD-S 2500 series
8ft/100" bed length, 87" between housings
y2 servo cnc press brake
stroke 4-10"
5 axis back gage-Z1,Z2-cnc controlled(depth-height & independent width)
control: Delem DA66W w/graphics
15HP main motor
230/3
american style die rail included & botton die-optional at added cost-no upper dies
WILA power Pack-upper hyd rail clamp
hyd. top clamp feature
auto cnc crowning feature
2 mechanical front supports included
no tooling
sold for over 125k new
run time hrs 5666.5 strokes: 419,731 as of 9-12-13 |
|
Ad # 14407 | Press Brakes (Hydraulic) |
2006 |
Durma |
E-40160 |
Good |
sold |
Photo /
More Info. |
176 tons x 156"/4 meters/13 ft bed: Durma hyd press brake # E-40160
capacity:176 US tons
control: DU600 cnc 2 axis back gage X & R front to back/up down control ,manual z1 & z2 adj. fingers
bed length: 156"/4 meters/13ft ft
dist between housing: 121"
stroke: 7.9"
hp:20
CNC crowning feature
light curtain
palm buttons and or foot switch-keyed
manuals /cd
Note:Very nice brake,ready to go!
european tool style holder
rigging/loading fee approx: $1800.00
comes with a complete set of European style Wilson segmented tooling was used on 18-20 ga Stainless steel included--see below list
E40160 - European style tooling:
•41909XT (30° HEMMING PUNCH)
o10mm
o15mm
o20mm
o40mm
o50mm
o100mm
o100mm
o200mm
o300mm
o835mm
o835mm
o835mm
•41909LT (30° HEMMING PUNCH)
o835mm
•43595LT (HEMMING DIE, 10mm (.394”), V-OPENING)
o835mm
o835mm
o835mm
o835mm
o835mm
|
|
Ad # 14406 | Press Brakes (Hydraulic) |
2006 |
Durma |
E-30160 |
Good |
sold |
Photo /
More Info. |
176 ton x 120"/3meter/10ft bed: Durma Hyd Press brake # E-30160
Control: DU6000: 2 axis cnc back gage:X & R
w/Z1 & Z2 manual adjust
capacity:176 Ton
bed length: 120"/10ft/3 meter
distance between housing: 100"
hp: 20 motor
manual crowning feature
palm button and or foot control-key switched
stroke: 7.9"
light curtain
manuals included
Note: very nice clean brake! ready to go!
note: complete set of segmented
European style Wilson tooling included was used
on
18-20 ga stainless steel-see below
E30160 - European style
•42610LT (30°, TIP RADIUS (.030”))
o835mm
o835mm
•42610XT (30°, TIP RADIUS (.030”))
o15mm
o20mm
o20mm
o40mm
o40mm
o50mm
o50mm
o100mm
o100mm
o100mm
o100mm
o200mm
o200mm
o300mm
o300mm
•40004LT (30°, V-OPENING, 14mm
(.551”))
o835mm
•42204X
o10mm
o15mm
o20mm
o40mm
o40mm
o40mm
o50mm
o50mm
o50mm
o100mm
o100mm
o100mm
o200mm
o200mm
o300mm
o300mm
o300mm
Note: rigging/loading fee extra
approx: $1500.00 |
|
Ad # 9119 | Press Brakes (Hydraulic) |
1988 |
FECO Roto Die |
#15 |
Very Good |
Sold |
Photo /
More Info. |
14ga x 10ft Roto Die Hyd : FECO Roto-Die Hydraulic Press Brake 3-Way Full Length Lower Die (1) Set Seg... |
|
Ad # 5745 | Press Brakes (Hydraulic) |
2001 |
FRATELLI FARINA |
PFO-PS-N |
Excellent |
Sold |
Photo /
More Info. |
100" x 137 Ton FRATELLI FARINA (Built in Italy) Hydraulic Press Brake: Rated tonnage 125 metric ton/137 U.S. short ton
Overall length of ram 100-3/8"
Overall length and width of bed 100-3/8" x 6-3/4"
Distance between uprights 86-1/4"
Distance, centerline of bed to machine frame 12-5/8"
Length of stroke, approximately 14"
Maximum distance, top of bed to bottom of upper 16"
die holder plates
Distance, floor to machine bed 37"
Bed width x depth (for die tang) 1/2" x 3/4" with (5) 7/16" wide t-slots
Hydraulic tank capacity 100 gallons
|
|
Ad # 5493 | Press Brakes (Hydraulic) |
1989 |
GULFIL |
PE-25-100 |
Good |
SOLD |
Photo /
More Info. |
110 TON, 100" GUIFIL HYDRAULIC PRESS BRAKE: FEATURING UP-ACTING DESIGN, 2 AXIS CNC BACK GAUGE
CAPACITY, U.S. TONS ------------------ 110 TONS
BENDING LENGTH ---------------------------- 100"
DISTANCE BETWEEN HOUSINGS ----------------- 80"
THROAT DEPTH ------------------------------ 16"
STROKE LENGTH ----------------------------- 18"
SPEED, APPROACH ----------------------- 1.58 IPS
SPEED, BENDING ---------------------- .28 IPS
SPEED, RETURN --------------------- 2.17 IPS
MAIN DRIVE MOTOR ------------------- 10 HP A.C.
EQUIPPED WITH ---
AUTOMEC (AUTOGAUGE CNC 1000) 2 AXIS CNC BACK GAUGE
UPPER DIE CLAMPS |
|
Ad # 9676 | Press Brakes (Hydraulic) |
2006 |
Haco |
ERMS 36220 |
Excellent |
Sold |
Photo /
More Info. |
220 Ton x ? ft bed: 220 Ton x 12 ft bed
4 way bottom die with gooseneck top die (good to 3/8" mild steel plate)
back gauge
This machine is in NEW condition. Everything works as it should. |
|
Ad # 8595 | Press Brakes (Hydraulic) |
|
HTC |
890-G |
Fair |
Sold |
Photo /
More Info. |
90 Ton: Model: 890-G / SN: 670266B
Rated 10' x 10ga
100" between housings
15hp 3ph
$14,900 Plus Brokerage Fee or Best Offer
(716)627-5908 Tues. thru Sat. 9-5 EST |
|
Ad # 7575 | Press Brakes (Hydraulic) |
|
HTC |
150G |
Very Good |
Sold |
Photo /
More Info. |
150 TON X 12' HTC HYDRAULIC PRESS BRAKE: 150 TON X 12' HTC HYDRAULIC PRESS BRAKE
CAPACITY ................................. 150 TON
OVERALL LENGTH OF BED & RAM .............. 12'
DISTANCE BETWEEN HOUSINGS ................ 126-1/2´´
STROKE OF RAM ............................ 7´´
OPEN HEIGHT .............................. 12-1/2´´
CLOSED HEIGHT ............................ 5-1/2´´
DEPTH OF THROAT .......................... 8´´
RAM SPEED RAPID APPROACH ................. 60 IPM
RAM SPEED PRESS .......................... 40 IPM
RAM SPEED FAST RETURN .................... 120 IPM
FRONT OPERATED BACK GAUGE ................ HURCO
ELECTRIC FOOT TRIP ....................... YES
FLOOR STANDING ........................... YES
MOTOR .................................... 20 HORSEPOWER |
|
Ad # 13109 | Press Brakes (Hydraulic) |
|
HTC |
200-12H |
Good |
sold |
Photo /
More Info. |
12ft 200 Ton 5/16" x 10ft: HTC Press Brake
200 Ton 12 Ft
10Ft between the sides.
No tooling and No back gauge.
Machine is in great condition has been refurbished. |
|
Ad # 8279 | Press Brakes (Hydraulic) |
|
HTC |
200G |
Good |
Sold |
Photo /
More Info. |
200 Ton HTC, 12 ft HTC Hydraulic Press Brake: USED 12 FT. X 1/4" HTC HYDRAULIC BRAKEModel No. 200G
Bending capacity:12' x 1/4" mild steel
Tonnage capacity:200 tons
Overall length of bed & ram:12'
Distance between housings:10'5"
Stroke:7"
Open height:12-1/2"
Closed height:5-1/2"
Throat depth: 8"
Width of bed:5-5/16"
Speeds approx.:1"/Sec. - approach
.5"/Sec. - Press
1-1/4"/Sec. - return
EQUIPPED WITH:
36" Front operated manual micrometer
back gauge with vertical adjustment
Dual pushbuttons for operation
with emergency stop button
3-1/4" High die rail
Micrometer depth stop
Hydraulic pressure gauge
Bed & ram machined for angle-
front & back
Selector switch for normal-hold
Sectional ram die clamps
Pressure gauge
Hydraulic pump driven by
20 HP 1750 RPM 230/460/3/60 Motor
|
|
Ad # 11568 | Press Brakes (Hydraulic) |
80s? |
Hydra Tool |
100-10H |
Very Good |
sold |
Photo /
More Info. |
100 Ton 10 ft brake: HTC
Model 100-10H
100 Ton
10ft Throat 9" Distance between sides 8"
Hurco Backstop (needs service) |
|