| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 13221 | Press Brakes (Hydraulic) |
| 1986 |
Amada |
FBD5020 |
Good |
SOLD |
Photo /
More Info. |
| 55 ton: (1986)
50 Ton Amada Upacting Press Brake
Model# FBD5020
Table Length: 78.7"
Between Columns: 66.9"
Throat Depth: 15.75"
Stroke: 3.94"
Open Height: 14.57"
3-Axis CNC Backgauge
|
|
| Ad # 8860 | Press Brakes (Hydraulic) |
| 2007 |
Accurpress Accel |
515012 |
Good |
sold |
Photo /
More Info. |
| 150 Tons: Tonnage 150 Tons
Length of Bed 144"
Distance Between Frames 130"
Bed Height 34"
Length of Ram Stroke 10"
Ram Open Height 26"
Throat Depth 8"
Ram Closed Height 16"
Approach Speed 480
Bend Speed 24-48
Return Speed 320
Motor 20HP
Approximate Dimensions 161"L-R x 78"F-B x 100"H
Equipped With ETS3000 Supreme Backguage
12.1' TFT Active Matrix Screen Graphical Display
Bend Simulation with Interference and Tool Overload Checking
3000 Programs- 50 Steps Each Program
Off Line Programming and Program Storage Via: RS323 Link or 3.5 Diskette
Premium Servo Controlled CNC Backgauge
6 Axis: Y1/Y2, X, R, & Z1/Z2,
Optional R and Z1/Z2 Axis Offer Productivity Boost
Wila NSCL II New Standard Clamping
Lazer Safe Safety Guarding
Front Sheet Support Fixtures
Standard Ram Open Height is 18"
Increased by 8" for total of 26"
|
|
| Ad # 11357 | Press Brakes (Hydraulic) |
| 1987 |
Cincinnati |
CB-135-10 |
Very Good |
sold |
Photo /
More Info. |
| Cincinnati CB13510 :12' x 135 Tons Hurco Backgauge: Cincinnati CB-135-10
12' x 135 Tons
Hurco Backgauge-single axis
Hydraulic Press Brake
Hurco AB5S7 CNC Backgauge-single axis-front to back positionioning
Has factory switches on side for 3 different ram depths adjustments
Work Light
both Manuals Included-operator & maint
Miscellaneous Dies/tooling Included
1 -bullnose @ 12' in 2 6' Sections
1 -1-1/2" bottom die in 2 6' Sections
Hurco control-was 20K new
was repainted
|
|
| Ad # 5490 | Press Brakes (Hydraulic) |
| 1986 |
LDV |
55-BH-08N |
Good |
sold |
Photo /
More Info. |
| 55 TON LVD CNC HYDRAULIC PRESS BRAKE: TONNAGE CAPACITY ------------------ 55 TONS
OVERALL WORK LENGTH ----------------------- 100"
DISTANCE BETWEEN HOUSINGS ----------------- 80"
RAM STROKE ----------- ( MAXIMUM ) -------- 4"
RAM ADJUSTMENT ---------------------------- 3"
MAXIMUM DISTANCE BETWEEN BED AND RAM ------ 12"
DEPTH OF GAP ------------------------------ 8"
WIDTH OF BED ------------------------------ 5-
1/2"
MAIN DRIVE MOTOR ------------- 4 KW 230/460/3/60
EQUIPPED WITH ---
MNC 800 CNC BACK GAUGE WITH 30" RANGE
LOWER DIE HOLDER
UPPER DIE HOLDER
PEDESTAL CONTROL STATION WITH DUAL PALM & FOOT
CONTROL |
|
| Ad # 8859 | Press Brakes (Hydraulic) |
| 1998 |
Accurpress |
71758 |
Good |
sold |
Photo /
More Info. |
| 175 Tons: Overall Length 120"
Overall Tonnage 175 Tons
Hurco 2 Axis CNC Backgauge
(2) 36" Front Support Arms
Distance Between Frames 76"
Bed Height 34"
Bed Capacity Width 5.5"
Stroke 8"
Open Height 14"
Throat Depth 10"
Approximate Speed Fast Approach 90" / Min.
Slow Bend 24" / Min.
Fast Return 180" / Min.
Horsepower 15
Voltage 220/480
|
|
| Ad # 12850 | Press Brakes (Hydraulic) |
| 1979 |
Pacific |
— |
Good |
sold |
Photo /
More Info. |
| 150: Pacific Press brake
very good condition
manual back ga front op, depth of stroke controls
10ftx 150 ton capacity
fully hydraulic |
|
| Ad # 7573 | Press Brakes (Hydraulic) |
| 1976 |
PACIFIC |
70-6 |
Good |
Sold |
Photo /
More Info. |
| 70 TON X 6' PACIFIC HYDRAULIC PRESS BRAKE With CNC Back Gauge: 70 TON X 6' PACIFIC HYDRAULIC PRESS BRAKE
CAPACITY ................................. 70 TON
OVERALL LENGTH OF BED & RAM .............. 72´´
DISTANCE BETWEEN HOUSINGS ................ 51-1/2´´
STROKE OF RAM ............................ 8´´
OPEN HEIGHT .............................. 15´´
CLOSED HEIGHT ............................ 7´´
DEPTH OF THROAT .......................... 6´´
AUTO GAUGE CNC BACK GAGE MODEL ........... 1000
ELECTRIC FOOT TRIP ....................... YES
MILLED & DRILLED FOR ANGLES .............. YES
MOTOR .................................... 12-1/2 HORSEPOWER |
|
| Ad # 14614 | Press Brakes (Hydraulic) |
| 1981? |
Roto-die |
# 10 |
Good |
sold |
Photo /
More Info. |
| 10ft x 16ga: Roto Die hyd press brake
10ft x 16ga capacity max
4-way rotatable die in bottom
no back gage
front foot pedal actuation
bend height/angle adj counter
2-upper dies included V & flat for hemmming
rigging/loading approx:$800.00 |
|
| Ad # 7493 | Press Brakes (Hydraulic) |
| 1996 |
Trumpf |
V130 |
Very Good |
Sold |
Photo /
More Info. |
| 1996 Trumpf V130 10' x 144 Tons CNC Press Brake: Full Machine Specifications
Delem DA-65 Multi Axis Control
Capacity 144 Tons
Overall Length of Bed & Ram 120'
Distance between Housings 106"
Stroke 8.5"
Open Height 19"
Closed Height 10.5"
Throat Clearance 16"
Maximum Inclination of Ram 0.4"
Speeds
Form: 2-24" Per Min
Return: 320" Per Min
Distance Floor to Top of Bed 34"
Width at Top of Bed 4.75"
Operating Height 41"
Oil Capacity 66 US Gallons
Main Motor HP 25 HP
Control Features
Dalem DA-65 Multi Axis Control
Off Line Capable
Programmable Forming Speeds
Programmable Ram Opening
Programmable Reversal
Programmable Tonage Displayed Through CRT
Specs Continued
Travel 23.6"
Max Speed 200" Per Min
R-Axis Travel 9.8"
Max Speed 1900" Per Min
2 Back Guage Fingwer Supports
Fully Programmable Back Guage Speeds
Equipped With
Programmable Lower Tool Holder Crowning Adjustment
Full Tonage Throughout Stroke
Precision Ram Leveling with Dual Linear Glass Scale
Electric Foot Switch
Pedestal Palm Button Station
Full Safety Enclosure
ISB Pro Light Curtains
Manuals |
|
| Ad # 8595 | Press Brakes (Hydraulic) |
| — |
HTC |
890-G |
Fair |
Sold |
Photo /
More Info. |
| 90 Ton: Model: 890-G / SN: 670266B
Rated 10' x 10ga
100" between housings
15hp 3ph
$14,900 Plus Brokerage Fee or Best Offer
(716)627-5908 Tues. thru Sat. 9-5 EST |
|
| Ad # 8880 | Press Brakes (Hydraulic) |
| 1965 |
Pacific |
400-14 |
Good |
Sold |
Photo /
More Info. |
| 400 Tons: Bending Capacity 14' x 3/8" Mild Steel
10'x 1/2" Mild Steel
7' x 5/8" Mild Steel
Tonnage Capacity 400 Tons
Overall Length of Bed and Ram 14'
Distance Between Housings 12'4.5"
Stroke 12"
Open Height 20"
Closed Height 8"
Throat Depth 10"
Width of Bed 10"
Floor to Top of Bed 32"
Speeds Approximate 140"/Min. Advance
65"/Min. Press
131"/Min. Return
Equipped With 24" Hurco "Autobend 7" 2-Post
Programmable Back Gauge
Vertical Adjustment
Stroke Length, Tilt Adjustment, Tonnage Control
Micrometer Depth Stop
Pushbuttons for Start-Stop
Selector Switch for Inch-Run
Ram Machined for Angles-Front/Back
Sectional Ram Die Clamps
Vickers Hydraulic Pump
Driven by 40 HP 1770 rpm
34" Pit Required
|
|
| Ad # 6412 | Press Brakes (Hydraulic) |
| 1983 |
BERTSCH |
175 x 10 |
Good |
SOLD |
No Photo /
More Info. |
| 175 TON X 10' BERTSCH HYDRAULIC BRAKE: 175 TON X 10' BERTSCH HYDRAULIC BRAKE:
CAPACITY ......................... 175 TON
OVERALL LENGTH OF BED ............ 10'
DISTANCE BETWEEN HOUSINGS ........ 8'6´´
STROKE ........................... 10´´
OPENING .......................... 17´´ MAXIMUM7´´ MINIMUM
CNC BACKGAUGE .................... YES |
|
| Ad # 8280 | Press Brakes (Hydraulic) |
| 1993 |
Atlantic |
HD165X10 |
Good |
Sold |
Photo /
More Info. |
| 165 Ton x 10 ft Atlantic Hydraulic Press Brake: USED 10 FT. X 1/4" ATLANTIC HYDRAULIC PRESS BRAKE
Tonnage Capacity:165 Tons
Bending Capacities:10' x 1/4" Mild Steel
8' x 5/16" Mild Steel
Overall Length of Bed & Ram:10'2"
Distance Between Housings:98"
Stroke:6"
Open Height:16.25"
Closed Height:10.25"
Throat Depth:9-3/4"
Width of Bed:3-1/8"
Floor to Top of Bed:34"
S.P.M. Approx.:150"/Minute Rapid Approach
15"/Minute Press
165"/Minute Rapid Return
EQUIPPED WITH:
32" Pendant Operated Power Back Gauge With Control & Hand Wheel For Fine Positioning With Readout
3-1/2" High Two Die Rails
Electric Foot Switch
Ram Depth Pendant Control With Readout
Ram Adjustment Control
*Triad Safety Light Control
Pushbuttons For Start - Stop
Tonnage Control & Pressure Gauge
Sectional Ram Die Clamps
20 HP 220/440/3/60 Motor
|
|
| Ad # 13242 | Press Brakes (Hydraulic) |
| 1993 |
Amada |
HFBO |
Good |
sold |
Photo /
More Info. |
| 235 Ton x 14ft: Amada hydraulic press brake
Model HFBO
235 Ton
Year 1993
Control Amada Promecam
48" Back gauge
no pit required
light curtain
14ft bed
12ft Between Sides
Voltage 220/440 Wired 440
Stroke 7"
|
|
| Ad # 8883 | Press Brakes (Hydraulic) |
| 1982 |
Urisviken |
— |
Good |
sold |
Photo /
More Info. |
| 200 Tons: Capacity 200 Tons
Overall Length of Bed and Ram 12' 1 5/8"
Distance Between Housings 124"
Stroke 10"
Open Height 19 5/8"
Throat Depth 7 3/4"
Table Width 7 3/4"
Speeds Fast Approach 78" / Minute
Form 27 " / Minute
Creep Form 2.6" / Minute
Return 75" / Minute
Distance From Floor to Top of Table 31 1/2"
Main Motor 30HP 460/230/3/60
Equipped With Pedestal Palm Button Station
Bolt on Angle Brackets
Vickers Hydraulic Pump
Variable Speed Ram
Variable Tonnage
Bed Face Machined with Dovetail Slots
New Valves, Rebuild Hydraulic Cylinders in Jan
2008
Electrics 460/3/60
Voltage 220/440
|
|
| Ad # 7575 | Press Brakes (Hydraulic) |
| — |
HTC |
150G |
Very Good |
Sold |
Photo /
More Info. |
| 150 TON X 12' HTC HYDRAULIC PRESS BRAKE: 150 TON X 12' HTC HYDRAULIC PRESS BRAKE
CAPACITY ................................. 150 TON
OVERALL LENGTH OF BED & RAM .............. 12'
DISTANCE BETWEEN HOUSINGS ................ 126-1/2´´
STROKE OF RAM ............................ 7´´
OPEN HEIGHT .............................. 12-1/2´´
CLOSED HEIGHT ............................ 5-1/2´´
DEPTH OF THROAT .......................... 8´´
RAM SPEED RAPID APPROACH ................. 60 IPM
RAM SPEED PRESS .......................... 40 IPM
RAM SPEED FAST RETURN .................... 120 IPM
FRONT OPERATED BACK GAUGE ................ HURCO
ELECTRIC FOOT TRIP ....................... YES
FLOOR STANDING ........................... YES
MOTOR .................................... 20 HORSEPOWER |
|
| Ad # 8420 | Press Brakes (Hydraulic) |
| 1960 |
CHICAGO DRIES & KRUMP |
200HV10 |
Good |
sold |
Photo /
More Info. |
| 200 Ton: BENDING CAPACITY:1/4" X 10'
BEN & RAM OVERALL LENGTH:174"
DISTANCE BETWEEN HOUSINGS:124"
THROAT DEPTH:8"
STROKE:12"
OPEN HEIGHT:17"
CLOSED HEIGHT:5"
NO PIT REQUIRED
SPEEDS:ADVANCE 135"/ MIN
PRESSING 30"/ MIN
RETURN:145"/ MIN
MOTOR:(2)15 HP 1800 RPM
FRAME: 284U, 3 PAHAE, 60 CYC.220/440 VOLT
DOUBLE END HYDRAULIC PUMP MOTOR
EQUIPPED WITH:
24" HORN - RIGHT SIDE
FULL LENGTH SECTIONAL RAM DIE CLAMPS
FULL LENGTH T-SLOTTED BED
FOOT PEDAL CONTROL
no back gage
|
|
| Ad # 10055 | Press Brakes (Hydraulic) |
| 86?? |
Hydra-Tool Co:HTC |
200-12H |
Good |
sold |
Photo /
More Info. |
| 200 Ton x 12 ft: 200 Ton x 12 ft bed
124-1/2" between housings
8.5" throat
stroke counter
foot pedal
lube system-manual
lots of dies:1-2" opening-liitle rusty but will clean up ok-bead blast..
stroke adj.
24" power back gage
|
|
| Ad # 8856 | Press Brakes (Hydraulic) |
| 2000 |
Accurpress |
710010 |
Good |
Sold |
Photo /
More Info. |
| 100 Tons: Capacity 100 Tons
Overall Length of Bed and Ram 10"
Distance Between Frames 100"
Stroke 8"
Throat Depth 10"
Open Height 14"
Closed Height 6"
Speeds
Fast Approach 115IPM
Slow Bend 24 IPM
Fast Return 260 IPM
Approximate Cycles Per Minute (F.S.) 15
Back Gauge Range 24"
Bed Height 34"
Bed Width 3.5"
Main Motor 10HP
Equipped With Accurpress ETS 3000 Control System with Premium CNC Backgauge
5 Axis Premium CNC Gauging, Y, X, R, Z1, Z2 Axis
Adjustable Bend Speed Control
Complete Set of Upper Punch Holders
Bottom Filler Block
Electric Foot Switch,
Pedestal Dual Palm Controls
Complete Electrical Controls
Includes all Available Manuals and Accessories
|
|
| Ad # 9119 | Press Brakes (Hydraulic) |
| 1988 |
FECO Roto Die |
#15 |
Very Good |
Sold |
Photo /
More Info. |
| 14ga x 10ft Roto Die Hyd : FECO Roto-Die Hydraulic Press Brake 3-Way Full Length Lower Die (1) Set Seg... |
|
| Ad # 6445 | Press Brakes (Hydraulic) |
| — |
Atek Bantam |
B212 |
Excellent |
Sold |
No Photo /
More Info. |
| 12 Ton x 24" Bed Hydraulic Press Brake: LIKE NEW. Used very little. Has the stand and dies. This will fit in a pic... |
|
| Ad # 5088 | Press Brakes (Hydraulic) |
| — |
Amada |
RG-25 |
Very Good |
SOLD |
Photo /
More Info. |
| 25 Ton Hydraulic Press Brake: SPECIFICATIONS
TONNAGE -------------------------- 25 TONS
TABLE LENGTH --------------------- 47.3"
MAXIMUM BEND LENGTH -------------- 49.3"
DISTANCE BETWEEN UPRIGHTS -------- 40.2"
THROAT DEPTH --------------------- 7.88"
LENGTH OF STROKE ----------------- 3.94"
OPEN HEIGHT ---------------------- 14.58"
POWER REQUIREMENTS --------------- 3 KVA, 230 VOLT/3 PHASE
HYDRAULIC OIL RESERVOIR ---------- 6.86 GALLONS
WEIGHT (APPROX.) ----------------- 3,100 LBS.
CONTROL -------------------------- D-9 NC, S/N# FN66546
--------------------------------------------------------------------------------
EQUIPPED WITH
- CNC BACKGAUGE
|
|
| Ad # 12277 | Press Brakes (Hydraulic) |
| 1997 |
Primeline |
12Ft |
Good |
sold |
Photo /
More Info. |
| 220 Ton 12Ft: Primeline
220 Ton 12ft bed
10Ft Between housing Sides
36 inch DRO Back Gauge & ram up/down displays
10" Throat
190mm Stroke
15kw Motor |
|
| Ad # 13374 | Press Brakes (Hydraulic) |
| 2009 |
Durma |
ADS-25100 |
Excellent |
sold |
Photo /
More Info. |
| Durma 8 Foot, 110 Ton CNC Press Brake w/ 5-axis Backgauge : Durma hydraulic press brake
Durma 8 Foot, 110 Ton CNC Press Brake w/ 5-axis Backgauge
# AD-S 2500 series
8ft/100" bed length, 87" between housings
y2 servo cnc press brake
stroke 4-10"
5 axis back gage-Z1,Z2-cnc controlled(depth-height & independent width)
control: Delem DA66W w/graphics
15HP main motor
230/3
american style die rail included & botton die-optional at added cost-no upper dies
WILA power Pack-upper hyd rail clamp
hyd. top clamp feature
auto cnc crowning feature
2 mechanical front supports included
no tooling
sold for over 125k new
run time hrs 5666.5 strokes: 419,731 as of 9-12-13 |
|
| Ad # 3116 | Press Brakes (Hydraulic) |
| — |
LVD |
165 BH |
— |
sold |
Photo /
More Info. |
| LVD CNC Press Brake Model 165 BH: 217" Bending length
New in 1985 (currently in plant under power)
Distance between side frames: 148"
40" Horn on right side
Distance between bed and ram: 13.8" Max
Stroke of ram: 5.9" max., Adjustment of ram 4.7"
Depth of gap in side frame: 9.8"
Motor 18 Hp, 230/460 3 phase
Slot and pit required for bed
Back gauge range increased from 24" to 40" at time of purchase Work lifting system Equipped with: Axis X1, X2, R, Z1, Z2, U, V, Alpha-numeric keyboard, tape recorder, programmable speed |
|
| Ad # 8286 | Press Brakes (Hydraulic) |
| 1993 |
Betenbender |
6ft x 95 Ton |
Good |
Sold |
Photo /
More Info. |
| 95 Ton x 6 ft Betenbender Hydraulic Brake: Tonnage Capacity:95 Tons
Bending Capacities:6' x 3/16" Mild Steel
5' x 1/4" Mild Steel
Overall length of Bed & Ram:72-1/2"
Distance Between Housings:60-1/2"
Stroke:8"
Open Height:14"
Closed height:6"
throat Depth:8"
Width of Bed:4"
Floor to Top of Bed:37"
Speeds Approx.:50"/Min. - Press
114"/Min. - Rapid Approach
168"/Min. - Return
EQUIPPED WITH:
24" Front Operated Manual Back
Gauge w/Readout Via Hand Wheel
Bed Machined For Angles - Front & Back
3-1/4" High 4-Way Die Rail
Free Standing Control w/Electric
Foot Switch & Emergency Stop Button
Selector Switch for Run - Jog;
Push - Pull Button For Start - Stop
Pushbutton For Up - Down
Tonnage Indicator
Hand Wheel Control For Depth of
Bed Adjustment
Sectional Ram Die Clamps
Hydraulic Pump Driven by
20 HP 1760 RPM 230/460/3/60 Motor
|
|
| Ad # 14104 | Press Brakes (Hydraulic) |
| 1990s |
Cincinnati |
230CBIIx10 |
Good |
sold |
Photo /
More Info. |
| 230 Ton 10ft : Cincinnati 230 Ton Press Brake in excellent
condition
230CBIIx10
12 Foot Bed Length
16" Stroke
|
|
| Ad # 9680 | Press Brakes (Hydraulic) |
| 1990 |
Tru-Fab/Wysong |
P40-4 |
Very Good |
sold |
Photo /
More Info. |
| 40 ton x 51 in brake: 40 Ton x 51"bed, 56" between housings
manual back gage
Hyd. pressure control knob
Upper & lower Dies included as shown
Dual palm buttons
Foot switch
17" throat
top Die fine Adj wheel |
|
| Ad # 6930 | Press Brakes (Hydraulic) |
| 2004 |
TRUMPF |
V320 |
Excellent |
Sold |
Photo /
More Info. |
| TRUMPF MODEL V320 CNC HYDRAULIC PRESS BRAKE: TRUMPF MODEL V320 CNC HYDRAULIC PRESS BRAKE
Capacity: 357 Tons
Maximum Bending Length: 13'4"
Distance Between Housings: 12'1"
Distance Floor to Bed: 41"
Stroke (Adjustable): 14" Max.
Open Height: 21"
Throat: 16"
Width of Bed: 8"
Speeds: 354 IPM - Advance
2 - 24 IPM - Pressing
320 IPM - Return
Flush Floor Design
EQUIPPED WITH:
TrumaBend 8-Axis Graphic 2-D CNC Control
4-Axis CNC Back Gauge
Ram & Bed Power Die Clamps
CNC Programmable Crowning
CNC Programmable Die Shift
Adjustable Front Supports & Sheet Lifter
50 HP Main Drive (Pump) Motor
Electrical Controls
Electric Foot Switch or Dual Palm Buttons Operation
BENDING CAPACITY (MILD STEEL):
12' x 1/2" |
|
| Ad # 5495 | Press Brakes (Hydraulic) |
| 1974 |
DIACRO |
16-96 |
Good |
SOLD |
Photo /
More Info. |
| 35 TON, 8' DIACRO HYDRA-MECHANICAL PRESS BRAKE: LENGTH OF BED & RAM ----------------------- 96"
DISTANCE BETWEEN HOUSINGS ----------------- 62"
CAPACITY -------- ( MILD STEEL ) ---- 96" X 16 GA.
STROKE OF RAM ----------------------------- 2"
SHUT HEIGHT RAM UP, STROKE DOWN ----------- 9"
RAM ADJUSTMENT ---------------------------- 3"
THROAT CLEARANCE FROM CENTER OF DIES ------ 9"
MAIN DRIVE MOTOR ------------------- 3 HP A.C.
EQUIPPED WITH ---
HURCO AUTOBEND IV CNC BACK GAUGE WITH 24" RANGE
STROKE ADJUSTMENT
COMPLETE HYDRAULIC SYSTEM
LOWER & TOP DIE HOLDERS
FOOT PEDAL CONTROL |
|
| Ad # 11152 | Press Brakes (Hydraulic) |
| — |
Niagra |
HBM-135-10-12 |
Good |
sold |
Photo /
More Info. |
| 135 Ton x 144" bed: 135 Ton
144" bed length
8" stroke
15" open height
120" between housings
2 axis cnc back gage
no tooling included |
|
| Ad # 12836 | Press Brakes (Hydraulic) |
| — |
Roto-Die |
10 |
Good |
sold |
Photo /
More Info. |
| 10' Brake: 10' Hydralic Roto-Die
Model 10
Voltage 220/440
Phase:3
Bending Capacity 120" x 16 gauge
72" x 10 gauge*
Motor 7-1/2 HP
Length of Stroke 3"
Strokes / Minute 20 to 50
Die Clearance 2-1/8"
Die Space 7-1/2"
Overall Dimensions -
Length 12' 1"
Front to Back 22"
Height 5' 3-1/2"
|
|
| Ad # 9120 | Press Brakes (Hydraulic) |
| 1984 |
Niagara |
HBM-135-10-12 |
Very Good |
sold |
Photo /
More Info. |
| 135 Ton 12ft Hyd: Niagara 135 Ton Hydraulic Press Brake 12ft Long 10ft 6" Between Housings Br... |
|
| Ad # 9154 | Press Brakes (Hydraulic) |
| 1983 |
Bertsch |
175-12 |
Good |
sold |
Photo /
More Info. |
| 175 Ton 12 foot: Specifications
Capacity: 175 Tons
Approach ram speeds (in/min): 245/88/29
Return ram speeds (in/min): 225/52
Overall bend length: 12'
Distance between housings: 10'6"
Platen height above floor: 36"
Bed projection below floor: 0"
Stroke length: 10"
Open height: 17"
Closed height: 7"
Throat depth: 8"
Platen width: 8"
Motor: 30 hp
Approximate shipping weight: 24,500 lbs.
Overall dimensions: 150" x 53" x 130"
Equipped With:
PC Ram control
no back gage
In plant under power @ customer's facility
|
|
| Ad # 11637 | Press Brakes (Hydraulic) |
| 2000 |
LVD |
150JS10 |
Very Good |
sold |
Photo /
More Info. |
| 10ft x 150Ton: used LVD Press Brake
10ft bed x 150 Tons
2- Axis CNC Back gage-Hurco Autobend 7 system-36" stroke
100" between Housings
8.5" throat depth
vari-tonnage control
Stroke counter
stroke height adj-5"
10KW main power needed
lots of tooling included
|
|
| Ad # 8287 | Press Brakes (Hydraulic) |
| 70's? |
Pacific |
J-75 |
Good |
sold |
Photo /
More Info. |
| 75 Tons x 10 ft Pacific Hydraulic Press Brake: USED 10 FT. X 12 GA. PACIFIC HYDRAULIC PRESS
Tonnage Capacity:75 Tons
Bending Capacities:11' x 12 Ga. Mild Steel
8' x 10 Ga. Mild Steel
6' x 3/16" Mild Steel
Overall Length of Bed & Ram:12'
Distance Between Housings:10'2 3/4"
Stroke:7"
Open Height:13"
Closed Height:6"
Throat Depth:12"
Width of Bed:5-1/2"
Floor to Top of Bed:33"
Speeds Approx.:
178"/Min. Rapid Advance
79"/Min. Normal Press
12"/Min. Anti Whip
142"/Min. Rapid Return
EQUIPPED WITH:
Electric Foot Switch
Selector Switch For Single Cont.
Stroke Length Adjustment
Ram Tilt Adjustment
Sectional Ram Die Clamps
Pushbuttons For Start Stop
T Slots in Front & Back of Bed
Hydraulic Power Unit Driven by
15 HP 1455 RPM 425/3/50 Motor |
|
| Ad # 6927 | Press Brakes (Hydraulic) |
| 1990 |
WYSONG |
RT-140-122 |
Excellent |
sold |
Photo /
More Info. |
| WYSONG MODEL RT-140-122 CNC HYDRAULIC PRESS BRAKE: WYSONG MODEL RT-140-122 CNC HYDRAULIC PRESS BRAKE
Capacity: 140 Ton
Overall Length of Bed & Ram: 10'2"
Distance Between Housings: 8'6"
Stroke: 8"
Die Space: 17"
Closed Height: 9"
Throat Depth: 12"
Distance Bed to Floor: 32"
Speeds: 236 IPM - Advance
16 IPM - Pressing
155 IPM - Return
Flush Floor Design
Welded Steel Construction
EQUIPPED WITH:
Cybelec DNC 90 6-Axis CNC Control with Color Graphics
Programmable 4-Axis Back Gauge
Hydraulic Die Clamping (Ram and Bed)
Automatic Lubrication System
10 HP AC Main (Pump) Drive Motor; Electrical Controls
Dual Palm Button or Electric Foot Switch Operation
BENDING CAPACITY:
10' x 3/16" |
|
| Ad # 14551 | Press Brakes (Hydraulic) |
| 2008 |
Toyokoki |
APB-5260Wu |
Good |
sold |
Photo /
More Info. |
| 2008 Toyokoki APB-5260Wu Press Brake: 2008 Toyokoki APB-5260Wu Press Brake
60 ton bending
100mm stroke
2000mm bend table
250mm gap depth
67mm/s max speed
200V 3 phase
3.9 ton unit weight |
|
| Ad # 4813 | Press Brakes (Hydraulic) |
| 1996 |
PREMIER |
425.2 MOD 12 |
Demo Machine |
Sold |
Photo /
More Info. |
| PREIMER 25 TON CNC DEMO MACH.: CAPACITY ---------------------------- 25 TONS
BEND CAPACITY ----------------------- 4' X 16 GAUGE
DISTANCE BETWEEN FRAMES ------------- 30"
BED LENGTH -------------------------- 4'
RAM STROKE -------------------------- 4"
RAM OPEN HEIGHT --------------------- 10-1/2"
THROAT DEPTH ------------------------ 4"
RAM APPROACH SPEED ------------------ 240 IPM
RAM BEND SPEED ---------------------- 24 IPM
RAM RETURN SPEED -------------------- 300 IPM
MOTOR ------------------------------- 3 H.P., 230V, 3 PHASE
WEIGHT (APPROX.) -------------------- 3,150 LBS.
OVERALL DIMENSIONS (APPROX.) -------- 48"L X 42"W X 78" HIGH
HURCO AB-7/LP-11 CONTROL SYSTEM:
PROGRAMS ---------------------------- 600
NUMBER OF BENDS --------------------- 2400
GAUGE TRAVEL ------------------------ 24"
VERTICAL ADJUSTMENT ----------------- 10"
HORIZONTAL ADJUSTMENT --------------- 9"
GAUGE ADJUSTMENT -------------------- +/- .003"
GAUGE REPEATABILITY ----------------- +/- .002"
GAUGE SPEED ------------------------- 800 IPM
GAUGE HOLDING FORCE ----------------- 200 LBS.
POWER ------------------------------- 115/230 VAC |
|
| Ad # 7572 | Press Brakes (Hydraulic) |
| 1995 |
ACCURPRESS |
7608 |
Very Good |
Sold |
Photo /
More Info. |
| 60 TON X 8' ACCURPRESS HYDRAULIC PRESS BRAKE With CNC: 60 TON X 8' ACCURPRESS HYDRAULIC PRESS BRAKE
CAPACITY .................................... 60 TONS
OVERALL LENGTH OF BED & RAM ................. 96
DISTANCE BETWEEN HOUSINGS ................... 78´´
STROKE OF RAM ............................... 8´´
OPEN HEIGHT ................................. 14´´
CLOSED HEIGHT ............................... 6´´
DEPTH OF THROAT ............................. 10´´
RAM SPEED FAST APPROACH ..................... 90 IPM
RAM SPEED SLOW BEND ......................... 24 IPM
RAM SPEED FAST RETURN ....................... 180 IPM
2 AXIS AP-2 CNC CONTROL ..................... YES
MACHINED FOR ANGLES ......................... YES
ELECTRIC FOOT PEDAL ......................... YES
PEDESTAL PALM BUTTONS ....................... YES
EXPANDABLE MEMORY OPTION .................... YES
MOTOR ....................................... 10 HORSEPOWER |
|
| Ad # 8590 | Press Brakes (Hydraulic) |
| 90 |
BANTAM |
B412 |
Good |
sold |
No Photo /
More Info. |
| 4FT. 12 TON: 4 ft x 12 ton
IR 1 AND 3/4 STROKE |
|
| Ad # 5496 | Press Brakes (Hydraulic) |
| 1963 |
PACIFIC |
150-12 |
Good |
SOLD |
Photo /
More Info. |
| 150 TON, 12' PACIFIC HYDRAULIC PRESS BRAKE: CAPACITY -------------------------- 150 TONS
OVERALL LENGTH OF BED & RAM --------------- 12'
DISTANCE BETWEEN HOUSINGS ----------------- 8'5"
BENDING CAPACITY, MILD STEEL ---------- 10' 3/16"
STROKE OF RAM ----------------------------- 10"
OPEN HEIGHT ------------------------------- 15"
CLOSED HEIGHT ----------------------------- 5"
THROAT DEPTH ------------------------------ 6-3/4"
PIT REQUIRED FOR BED EXTENSION
BELOW FLOOR --- ( L x W x D ) ----- 10" X 2" X 16"
MAIN DRIVE MOTOR ------------------- 15 HP A.C.
OVERALL HEIGHT ---------------------------- 104"
( EXCLUDING 16" BELOW FLOOR SECTION )
EQUIPPED WITH:
UPPER DIE CLAMPS
LOWER DIE CLAMP
ELECTRIC CONTROL PEDAL
TONNAGE CONTROL
REMOVABLE RAM AND BED ANGLES |
|
| Ad # 6929 | Press Brakes (Hydraulic) |
| 1997 |
LVD |
350BH15 |
Very Good |
Sold |
Photo /
More Info. |
| LVD MODEL 350BH15 CNC HYDRAULIC PRESS BRAKE: LVD MODEL 350BH15 CNC HYDRAULIC PRESS BRAKE
Capacity: 350 Ton
Overall Length of Bed and Ram: 15'
Distance Between Housings: 12'6"
Stroke: 11.8" (Maximum)
Open Height: 15.75"
Throat Depth: 22.4"
Speeds: 236 IPM - Advance
30 IPM - Pressing
283 IPM - Return
Width of Bed Top: 10.6"
All Steel Welded Construction
Flush Floor Design
EQUIPPED WITH:
LVD Model MNC-95/C 5-Axis Control System
4-Axis Back Gauge
Sectional Ram Clamps
60 HP AC Main (Pump) Drive Motor
Self-Contained Hydraulic Power Unit
Electrical Controls
Sight Type Oil Level Gauge
BENDING CAPACITY:
15' x 3/8" |
|
| Ad # 14036 | Press Brakes (Hydraulic) |
| ? |
Bantam |
B 412 |
Good |
sold |
Photo /
More Info. |
| 4ft. x 12 ton 18 gauge mild steel: Bantam Press Brake (Pneumatic)
Model: B 412
Capacity: 4ft x 12 Ton
Tooling Space (in.)8-7/8
Ram Stroke (in.)0 - 1-7/8
Bed Adjustment (in.)2
Throat Depth (in.)5-3/4
Shut Height (in.)7-1/2
Bed and Ram Thick (in.)1-1/4
Ram Height (in.)9-7/8
Bed Width (in.)48
Between Housings (in.)48-1/4
Back Gauge Depth (in.)0 - 18
Maximum Free Air (ft³)2.2
Maximum Speed @ Full Stroke (SPM)30
Tooling pictured included
Users Manual Included |
|
| Ad # 8283 | Press Brakes (Hydraulic) |
| 1993 |
Atlantic |
HD165X10 |
Good |
sold |
Photo /
More Info. |
| 165 Tons x 10 ft Atlantic Hydraulic Press Brake: Tonnage Capacity:165 Tons
Bending Capacities:
10' x 1/4" Mild Steel
8' x 5/16" Mild Steel
Overall Length of Bed & Ram:10'2"
Distance Between Housings:98"
Stroke:6"
Open Height:16.25"
Closed Height:10.25"
Throat Depth:9-3/4"
Width of Bed:3-1/8"
Floor to Top of Bed:34"
S.P.M. Approx.:150"/Minute Rapid Approach
15"/Minute Press
165"/Minute Rapid Return
EQUIPPED WITH:
32" Pendant Operated Power Back Gauge
With Control & Hand Wheel For
Fine Positioning With Readout
3-1/2" High Two Die Rails
Electric Foot Switch
Ram Depth Pendant Control With
Readout
Ram Adjustment Control
*Triad Safety Light Control
Pushbuttons For Start - Stop
Tonnage Control & Pressure Gauge
Sectional Ram Die Clamps
20 HP 220/440/3/60 Motor
|
|
| Ad # 11076 | Press Brakes (Hydraulic) |
| — |
Cincinnati |
2 - 30 |
Very Good |
sold |
Photo /
More Info. |
| 6 ft -- 30 TON : SERIAL ............................ 28621
MODEL ............................. 2-30
CAPACITY .......................... 30 TON
OVERALL LENGTH OF BED AND RAM ..... 72"
DISTANCE BETWEEN HOUSINGS ......... 62"
STROKE OF RAM ..................... 2-1/2"
POWER RAM ADJUSTMENT .............. 4"
DIE SPACE, SDAU ................... 12"
DEPTH OF THROAT ................... 9"
POWER RAM ADJUSTMENT .............. YES
ELECTRIC FOOT PEDAL ............... YES
BACK GAUGE ........................ 24" MANUAL
DRIVE MOTOR, HORSEPOWER ........... 3
|
|
| Ad # 8081 | Press Brakes (Hydraulic) |
| 85?? |
Pacific |
J-series # J110-14 |
Good |
Sold |
Photo /
More Info. |
| 110ton 14 ft bed Hydraulic press brake: 110 Ton
14 ft bed length, 150" between housing
8" throat
4 way v die, 1/2?, 5/8", flat Vees
no back gauge
capacity rated at 12 ft x 10Ga(1/8") mild steel |
|
| Ad # 14415 | Press Brakes (Hydraulic) |
| ? |
Roto Die |
10 |
Good |
sold |
Photo /
More Info. |
| 10ft. x 16 Gauge: Roto Die Hydraulic Press Brake
Model: 10
Capacity: 10ft. x 16 Gauge
6ft. x 10 Gauge
Electrical: 230/3 phase
Motor7-1/2 HP
Length of Stroke....3"
Strokes / Minute....20 to 50
Die Clearance.......2-1/8"
Die Space...........7-1/2"
1 - No. 37 Roto-Die with:
7º cross-braking groove
85º die opening 3/8” wide
85º die opening 7/8” wide
30º die opening 1/2” wide
Roto-Die hydraulic press brake is equipped
with
depth-of-stroke adjustment with indicators,
length-of-stroke adjustment. |
|
| Ad # 13244 | Press Brakes (Hydraulic) |
| 1997 |
Betenbender |
50T x 12ft |
Good |
sold |
Photo /
More Info. |
| 50 ton x 12ft bed: Betenbender 50 Ton capacity x 12 ft bed
manual clamp style back gage
175 hrs on machine
no tooling included
tonnage control |
|
| Ad # 14928 | Press Brakes (Hydraulic) |
| ? |
Bantam Brake |
B212 |
Good |
sold |
Photo /
More Info. |
| 12 ton x 24" Pneumatic : Bantam Brake # B212 pneumatic press brake
press brakes offer versatility and
economy. This machine is a conveniently sized 2
foot 12 ton model. They perform numerous
prototyping and production press brake functions
including bending, flanging, hemming, flattening,
staking, box forming and more. Each machine uses
standard American-style, 5150 steel press brake
tooling. A 90 deg top punch and 3/4 inch bottom
vee die included.
Additional features include adjustable
stroke depth control, adjustable die spacing,
tamper proof speed control valve, complete modular
FRL unit with OSHA lockout, and a variable tonnage
control. No need to worry about wiring, simply
connect an air line. The conditioned air supply,
standard, gives years of trouble fee service. Buy
a press brake Made in America by experienced
craftsmen
Adjustable Stroke Depth Control is
provided by the screw stop for precise
repeatability. Raise the adjustable bed and
shorten the ram stroke to maximixe productivity
while reducing air consumption and minimizing the
pinch point for safer operation.
Adjustable Die Space handles numerous
tool sets and reduces or eliminates the pinch
point. Per OSHA guidelines, a die space gap of 1/4
inch or less is not a pinch point and provides the
safest operation method. Loosen the bed and raise
or lower it with the large bed elevating screws.
Leveling of bed to ram is easily accomplished
using this feature
Ram Speed Control via an infinitely
variable valve allows instant adjustment of air
flow to the dual cylinders. A minimum setting
creates a creep mode for setup, or select any
other position to safely match ram speed with your
job.
Safety Hooded Foot Pedal controls all ram
motion. Fully depress control pedal for down
stroke. Slightly release pedal to stop advancing
the ram. Completely release pedal at any time and
the counter-balanced ram automatically retracts to
the top of the stroke. For added safety, the ram
retracts if air supply is removed.
Modular FRL Unit is standard on all models
to condition air supply to pneumatic components
for long life. The unit consists of an adjustable
filter/regulator module with pressure gauge,
adjustable flow lubricator module and a three-way
lockable shut-off valve. The valve is vented to
relieve downstream pressure in the off position
per OSHA guidelines. Keyed padlock and lockout tag
are included.
Variable Tonnage Control provided through
the modular filter/regulator/lubricator unit
delivers twelve or twenty-four tons of ram force
to form up to 3/8 or 1/2 inch at maximum pressure.
Lower the pressure to suit the job, reduce air
consumption and preserve tooling.
Type: pneumatic
•Capacity: 12 ton
•Working Length (inches): 24
•Strokes: 30 strokes per minute
•Air Pressure (psi): 90
•Weight (pounds): 940
•Dimensions (LxWxH): 32 x 40 x 25
12 tons at 85 PSI, max 110psi
24" width
22" between housings
foot pedal actuated
1-3/4" stroke
14" manual back gage
5" throat
note: tooling shown included |
|
| Ad # 13629 | Press Brakes (Hydraulic) |
| 2006 |
Baykal |
1254 |
Excellent |
sold |
Photo /
More Info. |
| 4ft x 38 ton: Baykal hyd. press brake w/ cnc back gage
4’ x 38 ton
X/R gauge
Delem da 66 control
no tooling included
|
|
| Ad # 5493 | Press Brakes (Hydraulic) |
| 1989 |
GULFIL |
PE-25-100 |
Good |
SOLD |
Photo /
More Info. |
| 110 TON, 100" GUIFIL HYDRAULIC PRESS BRAKE: FEATURING UP-ACTING DESIGN, 2 AXIS CNC BACK GAUGE
CAPACITY, U.S. TONS ------------------ 110 TONS
BENDING LENGTH ---------------------------- 100"
DISTANCE BETWEEN HOUSINGS ----------------- 80"
THROAT DEPTH ------------------------------ 16"
STROKE LENGTH ----------------------------- 18"
SPEED, APPROACH ----------------------- 1.58 IPS
SPEED, BENDING ---------------------- .28 IPS
SPEED, RETURN --------------------- 2.17 IPS
MAIN DRIVE MOTOR ------------------- 10 HP A.C.
EQUIPPED WITH ---
AUTOMEC (AUTOGAUGE CNC 1000) 2 AXIS CNC BACK GAUGE
UPPER DIE CLAMPS |
|
| Ad # 995 | Press Brakes (Hydraulic) |
| 90's |
custom |
40 Ton |
Needs Work |
Sold |
Photo /
More Info. |
| Small Press Brake 40 Ton x 42": 42" bed
tee-slotted table;
hyd. unit,
foot switch;
fingers in top rail
2 avaiable
some tooling shown |
|
| Ad # 8080 | Press Brakes (Hydraulic) |
| 1970 |
Promecam |
RG35-20 |
Very Good |
Sold |
Photo /
More Info. |
| 35 Ton -80" bed length: 35 Ton unit W/ tonnage control
80" overall bed length, 66" between housings
8" throat
bottom acting-pushes up on bed
dual palm buttons
12" back gage
|
|
| Ad # 5044 | Press Brakes (Hydraulic) |
| 1982 |
DONWELL |
#17-1300 |
Very Good |
Sold |
Photo /
More Info. |
| Hydraulic Press Brake-17 Ton x 4ft-3"in: 17 Ton x 4-3"ft
DRC Single Axis Back Gauge new in 1982
Palm & Foot Control
Includes Die Rail but no dies included
Good. POR Due to DRC in Service.
One Owner Machine.
Tonnage 17-Ton
Overall Bend Lnegth 4' - 3"
Distance Between Hsgs. 41-1/2"
Throat Depth 5-3/4"
Stroke 0>3"
Motor 230/460V/3/60 (wired 460V at present)
With: Palm & Foot Control
Includes Die Rail
|
|
| Ad # 14618 | Press Brakes (Hydraulic) |
| 1997 |
Betenbender |
50T x 12ft |
Good |
sold |
Photo /
More Info. |
| 12ft x 50 ton : Betenbender Hydraulic press brake
50 Ton capacity x 12 ft bed
manual clamp style back gage
approx:175 hrs on machine(on time)very low
no tooling included
has tonnage control
note:can be upgraded easily to a 70ton
capacity for approx: $1500.00
rigging/loading onto flat bed truck
fee:$1750.00
|
|
| Ad # 10750 | Press Brakes (Hydraulic) |
| 1992 |
Betenbender |
14 x 120" |
Good |
sold |
Photo /
More Info. |
| 14' x 120 Ton capacity: Betenbender press brake,
14\GA x 120 ton capacity,
new 1992,
with Hurco single axis BG.
|
|
| Ad # 5756 | Press Brakes (Hydraulic) |
| 1981 |
LVD |
180-BH-10 |
Very Good |
Sold |
Photo /
More Info. |
| 165 TON X 10' LVD HYDRAULIC PRESS BRAKE: CAPACITY .......................... 165 TON
OVERALL LENGTH OF BED AND RAM ..... 10'
DISTANCE BETWEEN HOUSINGS ......... 8'6´´
STROKE OF RAM ..................... 6-7/8´´
MAXIMUM DIE SPACE ................. 16-3/4´´
MINIMUM DIE SPACE ................. 9-7/8´´
DEPTH OF THROAT ................... 9-7/8´´
WIDTH OF BED ...................... 7-3/4´´
DUAL PALM BUTTONS/ELECTRIC FOOT TRIP
|
|
| Ad # 11234 | Press Brakes (Hydraulic) |
| 1998 |
Amada |
NC9-EX2-P |
Very Good |
sold |
Photo /
More Info. |
| 35 tons x 48": Year: 1998
Capacity: 35 Tons
Table length: 47.3 in
Max bending length: 49.3 in
Distance between upringhts: 40.2 in
Throat depth: 7.88 in.
Length of stroke: 3.94 in
Open height: 14.58 in.
|
|
| Ad # 9257 | Press Brakes (Hydraulic) |
| — |
Pacific |
200Ton x 12 ft |
Fair |
sold |
Photo /
More Info. |
| 200 ton 12 ft. bed: distance between housing-125"
12ft. bed
200 ton cap.variable
24" manualback gage
(includes lower die riser)
some tooling-verify ??
|
|
| Ad # 14408 | Press Brakes (Hydraulic) |
| 1989 |
Amada |
1040E |
Good |
sold |
Photo /
More Info. |
| 100 ton x 13ft: Amada # 1040E hyd press brake
tonnage: 100us
die length: 13ft (157.5")
dist between housings: 10.5ft(129.9")
stroke: 3.94"
2 axis cnc back gage
some tooling included
riging/loading fee approx: $1500.00 |
|
| Ad # 6906 | Press Brakes (Hydraulic) |
| 1984 |
ALLSTEEL |
70-6 |
Very Good |
sold |
Photo /
More Info. |
| 70 TON X 6' ALLSTEEL HYDRAULIC PRESS BRAKE: 70 TON X 6' ALLSTEEL HYDRAULIC PRESS BRAKE
TONNAGE ......................... 70 TONS
OVERALL LENGTH OF BED & RAM ..... 72´´
DISTANCE BETWEEN HOUSINGS ....... 54´´
CAPACITY ........................ 6 X 3/16´´ MILD STEEL
STROKE .......................... 6´´ MAXIMUM
SHUT HEIGHT (SDAU) .............. 15´´
CLOSED HEIGHT ................... 9´´
THROAT .......................... 8´´
RAM SPEED APPROACH .............. 130 IPM
RAM SPEED PRESSING .............. 60 IPM
RAM SPEED RETURN ................ 130 IPM
FLOOR TO BED .................... 32´´
ELECTRIC FOOT TRIP .............. YES
MOTOR ........................... 20 HORSEPOWER |
|
| Ad # 5743 | Press Brakes (Hydraulic) |
| 1991 |
CINCINNATI |
230AF-16 |
Excellent |
SOLD |
Photo /
More Info. |
| 18' x 230 Ton CINCINNATI Auto Form Hydraulic Press Brake: Rated tonnage at bottom of stroke 230 ton
Rated bending capacity 18' x 10 Ga.
Overall length of bed and ram 18'
Distance between housings 16'6"
Length of stroke, adjustable up to 10"
Open height 17"
Closed height 7"
Throat depth 8"
Speed, approach 155 I.P.M.
slow form 3.4 I.P.M.
medium form 6.8 I.P.M.
rapid form 17 I.P.M.
return 175 I.P.M.
Depth x thickness of pit required 15" x 6"
Length of pit required 16'6"
|
|
| Ad # 9015 | Press Brakes (Hydraulic) |
| 1999 |
Amada |
FBDIII 8025FS |
Excellent |
Sold |
Photo /
More Info. |
| 8' x 88 Tons: SPECIFICATIONS:
Capacity - Tonnage 88 Tons
Bending Length 98.6"
Overall Length of Bed and Ram 98.4"
Distance between Housings 86.6"
Stroke - Maximum 5.91"
Height - Open 16.54"
Throat Depth 15.8"
Backguage Travel 19.7"
Floor to Top of Bed 37.25"
Speeds - Rising 3.03 IPS
- Bending 0.32 IPS
- Lowering 3.55 IPS
Bending Capacity - Mild Steel 6'6" x 3/16"
Approximate Overall Dimensions 143" L-R x 56" F-B x 97" H
Approximate Weight 13,669 Lbs.
EQUIPPED WITH:
Amada Model NC9-FS, 8 Axis CNC Gauging System
Power Backguage w/19.7" of Movement
Built-In Hydraulic System to Increase the Rigidity of the Lower Beam
by Evenly Distributing the Stress of Bending - thus maintaining Parallelism
Punch Holders (12)
Pressure Adjustment with Gauge
10.1 HP AC Main (Pump) Drive Motor
Electrical Controls
|
|
| Ad # 7579 | Press Brakes (Hydraulic) |
| 1980 |
CINCINNATI |
230CB12 |
Very Good |
Sold |
Photo /
More Info. |
| 230 TON X 14' CINCINNATI HYDRAULIC PRESS BRAKE With CNC Back Gauge: 230 TON X 14' CINCINNATI HYDRAULIC PRESS BRAKE
CAPACITY ......................... 230 TON
OVERALL LENGTH OF BED AND RAM .... 14'
DISTANCE BETWEEN HOUSING ......... 12'6´´
STROKE OF RAM .................... 10´´
OPEN HEIGHT ...................... 17´´
CLOSED HEIGHT .................... 7´´
DEPTH OF THROAT .................. 8´´
RAM SPEED HIGH ................... 101 IPM
RAM SPEED MEDIUM ................. 49 IPM
RAM SPEEDS LOW ................... 14 IPM
RAM SPEEDS RETURN ................ 95 IPM
HURCO AUTOBEND 20C CNC BACK GAUGE. YES
MILLED & DRILL FOR ANGLES ........ YES
ELECTRIC FOOT TRIP ............... YES
MOTOR ............................ 30 HORSEPOWER |
|
| Ad # 8289 | Press Brakes (Hydraulic) |
| — |
Rousselle |
POL 5025 |
Good |
sold |
Photo /
More Info. |
| 55 Ton x 10 ft Rousselle Hydraulic Press Brake: USED 10' x 14 GAUGE ROUSSELLE HYDRAULIC BRAKE
Tonnage Capacity:55 Tons
Bending Capacities:
10' x 14 Ga. Mild Steel
8' x 12 Ga. Mild Steel
Overall Length Of Bed & Ram:10'
Distance Between Housings:100"
Stroke:4"
Open Height:10"
Closed Height:6"
Throat Depth:9"
Width Of Bed:5-1/4"
Floor To Top Of Bed:32-3/4"
Speeds Approx: 2"/Sec. - Approach
.4"/Sec. - Press
3"/Sec. - Return
EQUIPPED WITH:
Electric Foot Switch
2-3/4" High Four Way Die Rail
Key Selector Switch For Manual-Off-
Auto & Emergency Stop Button
Stroke Length Adjustment
Pushbutton For Upstroke
Sectional Ram Die Clamps
Dovetail Slots In Front & Back
Of Bed
Hydraulic Pump Driven By 5.5 HP
1700 RPM 220/440/3/60 Motor
|
|
| Ad # 5746 | Press Brakes (Hydraulic) |
| 1977 |
CINCINNATI |
Series 135 CB x 8' |
Very Good |
Sold |
Photo /
More Info. |
| 135 Ton CINCINNATI Series 135 CB x 8’ Hydraulic Press Brake, with 2-ax: Flush floor design
Capacity at bottom 135 Tons
Overall length of bed and ram 10"
Distance between housings 8' 6"
Max. stroke 8"
Throat depth 7"
Die space 12"
|
|
| Ad # 8279 | Press Brakes (Hydraulic) |
| — |
HTC |
200G |
Good |
Sold |
Photo /
More Info. |
| 200 Ton HTC, 12 ft HTC Hydraulic Press Brake: USED 12 FT. X 1/4" HTC HYDRAULIC BRAKEModel No. 200G
Bending capacity:12' x 1/4" mild steel
Tonnage capacity:200 tons
Overall length of bed & ram:12'
Distance between housings:10'5"
Stroke:7"
Open height:12-1/2"
Closed height:5-1/2"
Throat depth: 8"
Width of bed:5-5/16"
Speeds approx.:1"/Sec. - approach
.5"/Sec. - Press
1-1/4"/Sec. - return
EQUIPPED WITH:
36" Front operated manual micrometer
back gauge with vertical adjustment
Dual pushbuttons for operation
with emergency stop button
3-1/4" High die rail
Micrometer depth stop
Hydraulic pressure gauge
Bed & ram machined for angle-
front & back
Selector switch for normal-hold
Sectional ram die clamps
Pressure gauge
Hydraulic pump driven by
20 HP 1750 RPM 230/460/3/60 Motor
|
|
| Ad # 5494 | Press Brakes (Hydraulic) |
| 1989 |
WYSONG |
H40-72 |
Good |
SOLD |
Photo /
More Info. |
| 40 TON x 52" WYSONG ROTARY ACTUATED HYDRA-MECHANICAL PRESS BRAKE: 40 TON WYSONG MODEL H40-72 ROTARY ACTUATED HYDRA-MECHANICAL PRESS BRAKE WIT... |
|
| Ad # 10537 | Press Brakes (Hydraulic) |
| 1973 ? |
Cincinatti |
CB135 |
Good |
sold |
Photo /
More Info. |
| 135 Ton, 10 ft. OAL: Machine includes bottom die block and misc operating
tools.
no tooling included
Machine capacity is 8 ft. between housings, 10 ft.
overall length of bed. the Hurco back gauge needs to
be fixed but all componants are in place. Good
rugged machine. |
|
| Ad # 11235 | Press Brakes (Hydraulic) |
| 2006 |
Betenbender |
6-50T |
Very Good |
sold |
No Photo /
More Info. |
| 50 ton x 6ft: 50 Ton x 6ft
programable back press
** MADE IN THE U.S.A. **
BETENBENDER HYDRAULIC PRESS BRAKE QUOTE
Model 6' x 50 Ton
SPECIFICATIONS:
Maximum Tonnage ......................... 50 Tons
Maximum Bending Length .................. 72 inches
Maximum Stroke Length ................... 8 inches
Open Height ............................. 14 inches
Closed Height . . . . . . . . . . . . . . 6 Inches
Throat Depth ............................ 8 inches
Distance Between Housings ............... 54-1/2 inches
Ram Repeatability ....................... +/- .002"
Hydraulic Pressure ...................... 2500 lbs.
Hydraulic Oil Capacity .................. 31 Gallons
Machine Weight .......................... 6,800 lbs.
Machine Dimensions:
Overall Height ................. 104 inches
Overall Length ................. 87 inches
Overall Width .................. 45 inches
Bed Height .............................. 28 Inches
Motor Horsepower ........................ 10
ACCURACY
Every Betenbender machine is thoroughly inspected and tested.
1.Parallelism is maintained between bed and ram or at preset
angle by using precision automatic leveling controls. Parallelism
is maintained at +/-.002" in low speed.
2.The ram bottom reversal point is controlled by precise limit
switches referenced off the bed. This isolates housing deflections, which can interfere with its accuracy.
Enhanced Productivity
Return speeds and rapid advance facilitate high cycle rates.
Operator control is simplified by slow and press speed, thus work
spoilage is avoided. Rapid advance with automatic change. The point
of speed change is fully adjustable by electric limit switch.
Micrometer type tilt adjustment is graduated in .001" increments
permitting ram tilt adjustments up to 1/2" in either direction.
ELECTRO MECHANICAL STROKE CONTROL is bed referenced.
Bottom limit is manually set with a lead screw and displayed by an mechanical readout calibrated in .001" increments.
VERSATILITY
BETENBENDER'S press brakes have long full tonnage strokes,
adjustable length and selectable speed combinations, adjustable
height for short stroke, 2-speed standard and the optional 3- speed for adjustable low speed to prevent whip.
ELECRICAL EQUIPMENT
Meets requirements of NFPA no.79, JIC and construction requirements of the latest ANSI B-11.3 Standards. Includes drip-proof, continuous duty 45 degree Celsius ambient hydraulic pump motor wired for 230 or 460 volt, 3 phase 60 hertz.
DEPENDABILITY
Self-lubricating replaceable non-metallic ways prevent galling and provide long service life. Cylinders are high-strength, all steel. To minimize wear and provide a superior oil seal, inside
cylinder surfaces are honed to a mirror finish.
Compact, precision machined aluminum manifold incorporates off-the shelf components, minimizes piping and consolidates "O" ring
mounted valves.
Quiet, vane type constant volume pumps. In keeping with good hydraulic design practice, these energy efficient pumps are located outside the reservoir.
Filtration of contaminants as small as 10 microns is accomplished
with intake and discharge filters. A built-in magnetic trap and air breather filter provide added protection against contaminants. Reservoir of large capacity facilitates effective heat dissipation. A fluid level gauge is provided.
CONTROL
Main Control Cabinet - NEMA 12 enclosures mounted in the right housing containing: magnetic non-reversing motor starter and 120 volt circuit.
Main motor START button and STOP button are illuminated.
RAM UP and RAM DOWN buttons.
RUN/JOG Switch.
Fusible disconnect.
MAINTENANCE
Clevis mounted cylinders eliminate cylinder binding by reducing the possibility of oil leaks from cylinder binding. (Pins & bushings do not rotate under load, this reduces excessive wear)
STANDARD EQUIPMENT
Clamp Type Backgauge-Manual American-Made Motor
Adjustable x,y,z All Steel Construction
Depth Stop w/Readout Two Speed Ram
Hour Meter All Hydraulic Fluid Included
Three Position Foot Pedal Disconnect Switch
NEMA Electrics Bottom Time Delay
BET650T
Standard Press Brake Equipment
Clamp Type Backgauge� Manual Adjustable X, Y, & ZAmerican Made Motors
Two Speed RamHour Meter
Bottom Time DelayNema Electrics
Three Position Foot PedalAll Hydraulic Fluids Included
Depth Stop w/Digital ReadoutDisconnect Switch
Three Speed (95T and Larger)All Steel Construction
|
|
| Ad # 8862 | Press Brakes (Hydraulic) |
| 1989 |
Adira |
QH 150-40 |
Good |
sold |
Photo /
More Info. |
| 165 Tons: Capacity 165 Tons
Length of Bed and Ram 13'3.4"
Distance Between Housings 10'2"
Stroke 4"
Open Height 3.4"
Open Height with Punch Holder 9.25"
Throat Clearance 17.72"
Back Guage Speed X Axis 45 Inch per Min
Main Motor Hoursepower 12HP
Oil Tank Capacity 26.5 US Gallons
Equipped With
Adira 24" Motorized Back Guage
Variable Tonage
4 Way Lower V-Die
Swing Down 4-Way Die Lifter
Sectional Ram Clamps
|
|
| Ad # 9691 | Press Brakes (Hydraulic) |
| — |
— |
homemade |
Good |
sold |
Photo /
More Info. |
| Horiz: press brake: 12" length-V die
can bend-1"
dies incl.
includes loading on your truck |
|
| Ad # 8282 | Press Brakes (Hydraulic) |
| 1982 |
Darley |
EHP.110.31/25 |
Good |
sold |
Photo /
More Info. |
| 121 Ton x 10 ft Darley Hydraulic Press Brake: USED 10 FT. X 3/16" DARLEY HYDRAULIC PRESS BRAKE
Capacity: 121 tons
Bending Capacities:
122" x 3/16" Mild Steel
8' x 1/4" Mild Steel
Overall Length of Bed & Ram:122"
Distance Between Housings:100.3"
Stroke:5.9"
Open Height:14.7"
Closed Height:4.8"
throat Depth:9.8"
Width of Bed:6.25"
Floor to Top of Bed:35.5"
Speeds Approx.:3.9"/Second - Approach
.30"/Second - Press
2.5"/Second - Return
EQUIPPED WITH:
5.5" High Die Rail
Free Standing Control w/Dual Palm
Buttons For Run - Emergency Stop Button
Electric Foot Switch
Pushbuttons For Start - Stop
Sectional Ram Die Clamps
T-Slots in Front - Back & Top of Bed
Hydraulic Power Unit
Driven by 10 HP Motor
|
|
| Ad # 7489 | Press Brakes (Hydraulic) |
| 1989 |
Adira |
QH 150-40 |
Very Good |
sold |
Photo /
More Info. |
| 1989 Adira QH 150-40 Hydraulic Press Brake: Adira 165 ton x 13'
Length Bed & Ram 13'3.4"
10'-2" between housings
Stroke 4"
24" Motorized Back Gage
Full Machine Specifications
Capacity 165 Tons
Length of Bed and Ram 13'3.4"
Distance Between Housings 10'2"
Stroke 4"
Open Height 3.4"
Open Height with Punch Holder 9.25"
Throat Clearance 17.72"
Back Guage Speed X Axis 45 Inch per Min
Main Motor Hoursepower 12HP
Oil Tank Capacity 26.5 US Gallons
Equipped With
Adira 24" Motorized Back Guage
Variable Tonage
Swing Down 4-Way Die Lifter
Sectional Ram Clamps
no tooling included |
|
current group
groups previously viewed
groups not yet viewed
