| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 14851 | Vertical Machining Centers (VMC) |
| 1999 |
Hurco |
BMC2416/SSM |
Good |
Sold |
Photo /
More Info. |
| 24 x 16 travels: 1999 Hurco BMC 2416/SSM vertical machining center
control:Hurco SSM
main motor spindle: 10HP
chip auger
ridged tapping
very little tooling included
Note:control is loaded with every factory option Hurco
offered including 3D mold,DXF,ultripro software,milti-
pockets,,ultinet.It is running and I’ve had no problem getting
parts. Has a new control panel on it. I used to work factory
service for Hurco so I have put some time into it.
Model #: BMC2416
Mfg: 1999
std. factory specs below-verify actual machine
Specifications:
Table .. 29.5" x 15.7"
Max Load on Table ...... 760 lbs
Travels, X-Axis .... 24”
Travels, Y-Axis .... 16”
Travels, Z-Axis .... 22”
Main Motor ...... 10 HP
Spindle Speed : 80 - 8,000 RPM
Spindle Axis Torque/RPM ….. 100 ft-lb / 500 (30 min)
Spindle Taper: CAT 40
ATC :24 (Swing Arm)
Rapid Traverse ……….….……. 945 IPM (X,Y)
Rapid Traverse ……….….……. 590 IPM (XZ)
Max Thrust Rating …….….…... 1450 lbs. (X,Y) 2490 (Z)
Operating Dimensions :139" W x 135" D x 103" H
Shipping Dimensions : 89" W x 116" D x 96" H
Machine Weight: 9,040 lbs
note:this is a great machine and has been upgraded and
fully tested,ready to go!
rigging/loading fee add $800.00
|
|
| Ad # 15396 | Vertical Machining Centers (VMC) |
| 1995 |
Cincinnati Milacron |
Lancer 1000 |
Needs Work |
sold |
Photo /
More Info. |
| 40" x 20" x 22": 1995 Cincinnati Milacron LANCER 1000
Vertical Machining Center
Control: Acramatic A2100
X Axis Travel: 40″
Y Axis Travel: 20″
Z Axis Travel: 22″
Table Size: 44″ x 20″
Table Load: 2,200 LBS
Spindle Taper: 40
Spindle Speed: 10,000 RPM
Tool Changer Capacity: 30 ATC
Machine Dimensions: 140″L x 95″W x 105″H
Machine Weight: 11,000 LBS
Machine is running but needs attention:
1. the spindle chiller is not working.
2. Also the max. speed it can run at is
6,000
rpm as it needs
new spindle bearings
|
|
| Ad # 9090 | Vertical Machining Centers (VMC) |
| 1996 |
FADAL |
VMC 15 |
Very Good |
Sold |
Photo /
More Info. |
| 20 x 16 x 20; Fadal VMC 15: Control: FADAL 88 HS
RS 232C Port
Travels:
X: 20"
Y: 16"
Z: 20"
Table Size: 30" x 20"
Spindle: CAT 40
Spindle Power 15 hp
Spindle Speed: 7,500 rpm
Options:
Rigid Tapping
Wired for a 4th Axis (4th axis NOT included)
|
|
| Ad # 7034 | Vertical Machining Centers (VMC) |
| 1990 |
Leblond Makino |
FNC-106/A30 |
Excellent |
Sold |
Photo /
More Info. |
| Leblond Makino CNC Vertical Machining Center Model FNC-106/A30: Leblond Makino CNC Vertical Machining Center
Model FNC-106/A30
Specification Description
Table Dimensions: 23.5" x 55"
X Travel: 41"
Y Travel: 23.5"
Z Travel: 22"
Taper: #50
Spindle Speeds: 3500 RPM
ATC: 30
Equipped With:
Fanuc OM-B CNC Pendant Control |
|
| Ad # 14487 | Vertical Machining Centers (VMC) |
| 1995 |
Clausing/ Kondia |
B500 |
Good |
sold |
Photo /
More Info. |
| travels: : X-22.0 ",Y:15",Z:15": Clausing VMC # B500
table size: 27.5" x 14"
main spindle motor: 3.7KW
travels: : X-22.0 ",Y:15",Z:15"
table load 750lbs
taper cat 40
spindle rpm: 100-6000rpm variable
coolant
tool changer: 16
|
|
| Ad # 7033 | Vertical Machining Centers (VMC) |
| 2001Rema |
Fadal |
6030 |
Very Good |
sold |
Photo /
More Info. |
| Used Fadal CNC Mill :60 x 30 travels: Remanufacured by factory in 2001
10,000 RPM spindle
22.5 HP High torque
coolant thru spindle
top cover
40 taper
servo coolant
remote pulse generator
rigid tap
remote jog wheel
4 meg memory
3.5" floppy disc
work light
box ways
table size : 30" wide x 62.5" long, used sub plate
air blast
21 station tool changer
control:Fadel muliti processor
|
|
| Ad # 9061 | Vertical Machining Centers (VMC) |
| 1985 |
Leblond Makino |
FNC106/A30 |
Good |
Sold |
Photo /
More Info. |
| 50 Taper, travels X41, Y23", Z 22": Fourth axis!!! 50 taper spindle,
travels: 41-X, 23"-Y, 22"-Z
Fanuc 11M. geared head, machine looks good, Full 4th axis 16" Tsudakoma Rotary Table Model # RNCM401R, Chip Conveyer, 30 tool changer, some holders included, tapping head, etc.. Operator and Programming Manual included. |
|
| Ad # 7014 | Vertical Machining Centers (VMC) |
| 2000 |
Hardinge |
600 II |
Very Good |
sold |
Photo /
More Info. |
| Hardinge VMC 600 II: Hardinge VMC 600 II
Specifications:
Table.....................................:29.53" x 20.08"
Table Load Capacity.......................:1,540 Lbs.
X-Axis....................................:23.62"
Y-Axis....................................:20.08"
Z-Axis....................................:20.08"
Spindle Nose to Table Surface(Down).......:6.1"
Spindle Nose to Table Surface(Up).........:26.1"
Taper.....................................:CAT 40
HP........................................:17.3 Fanuc Alpha 8
RPM.......................................:8,000
ATC.......................................:20
Tool Diameter.............................:3.5"
Tool Length...............................:12"
Tool Weight...............................:13.2 Lbs.
Tool Change Time..........................:6.5 Sec.
Air Pressure..............................:70 Psi
Equipped With:
Fanuc OM |
|
| Ad # 14476 | Vertical Machining Centers (VMC) |
| 90's |
Victor |
Fortune Vcenter-65 |
Excellent |
sold |
Photo /
More Info. |
| 660 lb. max table load: Victor (Fortune) Model V Center-65 Vertical
Machining Center
35-1/4" x 16" T-Slotted Table
25.6" X-Travel
16.14" Y-Travel, 20.08" Z-Travel
Cat 40 Spindle Taper
24-Position ATC
660 lb Max Table Load
13.2 lb Max Tool Weight
60-6,000 RPM
Fanuc Series O-M CNC Controls
Coolant Tank and Pump
RS232 Port
7.4 hp
220 Volt, 3-Phase
MINOR TECHNICAL ISSUES WITH LIMIT SWITCH |
|
| Ad # 14475 | Vertical Machining Centers (VMC) |
| 90's |
Victor |
Fortune Vcenter-65 |
Good |
sold |
Photo /
More Info. |
| 660 lb. max table load: Victor (Fortune) Model V Center-65 Vertical
Machining Center
35-1/4" x 16" T-Slotted Table
25.6" X-Travel, 16.14" Y-Travel, 20.08" Z-
Travel
Cat 40 Spindle Taper
24-Position ATC
660 lb Max Table Load
13.2 lb Max Tool Weight
60-6,000 RPM
Fanuc Series O-M CNC Controls
Coolant Tank and Pump
RS232 Port
7.4 hp
220 Volt, 3-Phase |
|
| Ad # 6999 | Vertical Machining Centers (VMC) |
| 1999 |
BOSTOMATIC |
BG12G |
Very Good |
Sold |
Photo /
More Info. |
| 1999 BOSTOMATIC BG12G Vertical Machining Center: One (1) 1999 BOSTOMATIC BG12G
BDC 3200 Control
Longitudinal X Axis Travel 14.9"
Transverse Y Axis Travel 15.3"
Vertical Z Axis Travel 10.0"
Max Routing Speed 30,000 RPM
Tool Holding Fixture HKS 40
Tool Changer 6 Mag Spaces
Work Table Table Surface 16.6" x 13.0"
Max Table Load 154 lbs
Machine Base Polymer Concrete
Weight 6,994 lbs
HSK 30 Spindle
Grease Lubricated Motor Spindle With 30,000 min
specially for graphite and other dust raising materials
Ethernet Connection
15" Screen Color
Electronic Handwheel
Min Quanuty Lubrication
Pneumatic Over Pressure on the measuring systems
and on the motor spindle
Efficent graphite dust extraction
Tool changer
Digital drive technology
Digital measuring systems with high resolution
Operator friendly shop optimised control
3 Axis
CDAM BSC 3200 (Heidenham)
Torit Mist Extractor
Prestressed Recirculating Ball Screw For Highest Precision
Completely Enclosed Machine in order to elimiate all emissions
Largest possible front door with large window
Graphite extractor unit integrated into the machine bed
Liquid Cooled Motor Spindle
New Spindle in 2002
6900 Hours |
|
| Ad # 13715 | Vertical Machining Centers (VMC) |
| 1993 |
Kiwa |
1310 Mustang CNC |
Good |
sold |
Photo /
More Info. |
| 20" x 50": 1993 Kiwa 1310 Mustang CNC
fanuc O-M Controll
Travel:
X Axis: 51.2"
Y Axis: 20.1"
Z Axis: 22.0"
Spindle Speed: 100-4000rpm
Spindle Taper: 40
Number of Tools: 25 |
|
| Ad # 6994 | Vertical Machining Centers (VMC) |
| 1998 |
HAAS |
VF-3 APC |
Very Good |
sold |
Photo /
More Info. |
| 1998 HAAS VF-3 APC Vertical Machining Center: 1998 HAAS VF-3 APC
40" X 20" X 25"
MACROS
REMOT JOG
WIRED FOR THE 4TH AXIS
CHIP AUGER
P-COOL
FLOOPY
RIGID TAPPING
10,000 RPM SPINDLE
AUTOMATIC PALLET CHANGER
COMMENTS-MACHINE WAS ONLY EVER USED TO
CUT ALUMINUM |
|
| Ad # 15972 | Vertical Machining Centers (VMC) |
| 1994 |
Hurco |
BMC 20LR |
Good |
sold |
Photo /
More Info. |
| 24" x 14 x 16" travels: Hurco #BMC 20lR vertical machining center
Travels: 24" X,14" Y,16" Z
hp:10
table size:33.8" x 15.7"
load table:550lbs
spindle: cat 40
tool changer :16 stations
this machine is under power. 6000 rpm spindle. Tooling on mill table goes with it.
The floppy drive does not work! It has conversational programing with separate graphics screen. The riggers quoted me $1760 loaded on truck. Additional $200 if they carry it back to there place for loading at another time. $100 per month for storage. Let me know if you need something else |
|
| Ad # 14471 | Vertical Machining Centers (VMC) |
| 2008 |
Haas |
VF-6/40 |
Good |
sold |
Photo /
More Info. |
| 64 x 32 x 30: Haas VF-6/40 Vertical Machining Center with X-Axis
Travel of 64", Y-Axis Travel of 32" and Z-Axis
Travel of 30".
Has 20 Hp 7,500 RPM 40 Taper Spindle with 2-
Speed
Gearbox.
Has 24 Tool Side Mount Toolchanger.
Has Automatic Chip Auger System, Programmable
Coolant Nozzle, USB Port, 1 Mb Control Memory,
Visual Quick Code, Remote Jog Handle, Rigid
Tapping and 95 gallon flood coolant system. |
|
| Ad # 6986 | Vertical Machining Centers (VMC) |
| — |
MAZAK |
VQC30/50B |
Good |
sold |
Photo /
More Info. |
| USED MAZAK VQC30/50B CNC VERTICAL MACHINING CENTER: USED MAZAK VQC30/50B CNC VERTICAL
MACHINING CENTER
TABLE SIZE: 31.66" X 68.83"
TABLE TRAVEL: X-AXIS 59.8"
Y-AXIS 31.5"
Z-AXIS 18.1"
DISTANCE SPINDLE NOSE TO TABLE TOP: 7.8" -
25.9"
DISTANCE BETWEEN COLUMNS: 34.9"
TABLE LOAD CAPACITY: 1760 LBS.
TABLE HEIGHT FROM FLOOR: 29.5"
RAPID TRAVERSE RATES: 597 IPM (X,Y,Z)
CUTTING FEED RATES: .04 - 197 IPM
SPINDLE NOSE: CAT #50
SPINDLE SPEEDS: TO 3,150 RPM
TOOL MAGAZINE: 24 ATC
MAXIMUM TOOL DIAMETER: 3.54"
MAXIMUM TOOL LENGTH: 9.84"
MAIN MOTOR: 15 HP AC
EQUIPPED WITH:
MAZATROL M-2 CNC CONTROL
24 TOOL ATC
SPINDLE CHILLER
FULL ENCLOSURE |
|
| Ad # 6983 | Vertical Machining Centers (VMC) |
| 1985 |
HURCO |
MD3 |
Good |
sold |
Photo /
More Info. |
| USED HURCO MODEL MD3 CNC VERTICAL MACHINING CENTER: USED HURCO MODEL MD3 CNC VERTICAL
MACHINING CENTER
TABLE SIZE: 20.5" X 50.4" OVERALL
15.7" X 44.1" WORKING SURFACE
TABLE LONGITUDINAL TRAVEL (X): 41"
TABLE CROSS TRAVEL (Y): 18"
HEAD VERTICAL TRAVEL (Z): 20"
SPINDLE SPEEDS: 40 TO 4000 RPM
SPINDLE TAPER: #40 V-FLANGE
DRILLING CAPACITY: 1-1/2" DIAMETER
MILLING CAPACITY: 8 CU. IN./MIN.
TAPPING RATE: 7 TAPS/MINUTE CONTINUOUS
FEED RATE: .1 TO 250 IPM
RAPID TRAVERSE RATE: 400 IPM
TOOL CHANGER: 24 STATION CAROUSEL
MAXIMUM TABLE LOAD CAPACITY: 1650 LBS.
MOTOR: 8 HP AC VARIABLE SPEED
EQUIPPED WITH:
ULTIMAX 2 CNC CONTROL, DUAL CRT, RS232
PORT
SWING AWAY CNC CONTROL PENDANT
24 TOOL ATC
COOLANT
AIR CONDITIONED CABINET
HARDENED & GROUND BOX WAYS
WAY COVERS
AUTOMATIC LUBRICATION |
|
| Ad # 6982 | Vertical Machining Centers (VMC) |
| 1983 |
MAZAK |
V10N |
Good |
sold |
Photo /
More Info. |
| USED MAZAK MODEL V10N CNC VERTICAL MACHINING CENTER: USED MAZAK MODEL V10N CNC VERTICAL
MACHINING CENTER
TABLE SIZE: 55.1" X 26.7"
AXIS TRAVEL: 40" - X-AXIS
20" - Y-AXIS
20" - Z-AXIS
DISTANCE, SPINDLE NOSE TO TABLE: 7-7/8" MIN.
27-7/8" MAX.
SPINDLE CENTER TO COLUMN WAYS: 21.6"
DISTANCE, FLOOR TO TABLE TOP: 30.3"
MAXIMUM TABLE LOAD: 2,200 LBS.
RAPID TRAVERSE RATE: 400 IPM X,Y & Z
WAYS: HARDENED AND GROUND RECTANGULAR
SPINDLE SPEEDS: 22.4 TO 3150 RPM
SPINDLE NOSE: #45 MMT
TOOL STORAGE CAPACITY: 30
MAXIMUM TOOL DIAMETER:
ALL POCKETS FULL- 4.8"
ADJACENT POCKETS EMPTY- 6'
MAXIMUM TOOL LENGTH: 17.7"
TOOL CHANGE TIME: 6.0 SECONDS
MOTOR: 10 HP DC
EQUIPPED WITH:
MAZATROL M-1 CNC CONTROL- PENDANT
CONTROL STYLE
COOLANT SYSTEM
SPLASH/CHIP ENCLOSURE
TELESCOPING WAY COVERS
30 STATION ATC |
|
| Ad # 6984 | Vertical Machining Centers (VMC) |
| 1978 |
MAZAK |
V15 |
Good |
sold |
Photo /
More Info. |
| USED MAZAK MODEL V15 CNC VERTICAL MACHINING CENTER: USED MAZAK MODEL V15 CNC VERTICAL
MACHINING CENTER
TABLE SIZE: 55.1" X 26.7"
AXIS TRAVEL: 40" - Y
20" - X
30" - Z
DISTANCE SPINDLE NOSE TO TABLE TOP: 8" MIN.
38" MAX.
SPINDLE CENTER TO COLUMN WAYS: 21.6"
DISTANCE, FLOOR TO TABLE TOP: 33.5"
MAXIMUM TABLE LOAD: 3,300 LBS.
RAPID TRAVERSE RATE: 400 IPM
WAYS: HARDENED AND GROUND RECTANGULAR
SPINDLE SPEEDS: 14 - 2000 RPM
SPINDLE NOSE: #50 MMT
TOOL STORAGE CAPACITY: 20
MAXIMUM TOOL DIAMETER:
ALL POCKETS FULL- 5"
ADJACENT POCKETS EMPTY- 17.7"
TOOL CHANGE TIME: 6.0 SECONDS
MOTOR: 15 HP DC
EQUIPPED WITH:
VICKERS 2100 ACRAMATIC CNC CONTROL
REMOTE PENDANT STATION
TRANSFORMER
COOLANT SYSYTEM |
|
| Ad # 9049 | Vertical Machining Centers (VMC) |
| 1992 |
Haas |
VF-2 |
Excellent |
Sold |
Photo /
More Info. |
| 30" x 20" x 16": 1992 Haas VF-2. Less than 1500 feed hrs. Used at Kansas State University/ P... |
|
| Ad # 11753 | Vertical Machining Centers (VMC) |
| 1996 |
Fadal |
VMC4020 pallet changer |
Excellent |
sold |
Photo /
More Info. |
| 40" x 20": (1996)
FADAL VMC 4020 Dual Pallet
40 TAPER
TRAVEL & TABLE SIZE
X AXIS 40
Y AXIS 20
Z AXIS 22
30 ATC
FULL FOURTH AXIS W/INDEXER
RIGID TAPPING
PALLET CHANGER
10,000 RPM SPINDLE
150 PSI COOLANT THRU THE SPINDLE
CHIP CONVEYOR
|
|
| Ad # 9821 | Vertical Machining Centers (VMC) |
| 1982 |
BRIDGEPORT |
— |
Excellent |
Sold |
Photo /
More Info. |
| 42" PROTO TRAK PLUS: IN EXCELLENT SHAPE |
|
| Ad # 15666 | Vertical Machining Centers (VMC) |
| 2001 |
Stama |
MC 331 Twin Spindle |
Good |
sold |
Photo /
More Info. |
| x 31.49" y 15.75" z 13.96": Stama MC 331 Twin Spindle
Fanuc 18i-M Controller
X Axis Travel: 31.49”
Y Axis Travel: 15.75”
Z Axis Travel: 13.96”
Indexer Side A: Peiseler
Indexer A Model # AWUP-160
Indexer A Serial # 23979
Indexer Side B: Peiseler
Indexer B Model # AWUP-160
Indexer B Serial # 23953
Coolant: Blechtechnic Model KMB 900L
CLT Serial # G001 061-200
CLT Pressure: 1000 PSI TSC
Tool Taper: CAT-40
Tool Capacity: 21 Per Spindle
Control: 18Im
Spindle RPM: 10500 |
|
| Ad # 15662 | Vertical Machining Centers (VMC) |
| 2005 |
Mori Seiki |
NV 5000 |
Good |
sold |
Photo /
More Info. |
| x 31.5" y 20.1" z 20.1": 2005 Mori Seiki NV 5000-Vertical Machining Center
mori seiki : MSX-501 Control
40 Taper spindle
1000 PSI hi pressure Coolant
X-Axis Travel (Table Cross): 31.5”
Y-Axis Travel (Spindle-Head Vert.): 20.1”
Z-Axis Travel: 20.1”
With Dual 5 Axis Nikken Trunnion
Spindle Speeds: 12,000 RPM |
|
| Ad # 1530 | Vertical Machining Centers (VMC) |
| 1988 |
Mori Seiki |
Mori MV Jr. With Pallets |
Good |
sold |
Photo /
More Info. |
| Mori MV Jr. (22" x 16" travels) With Pallet Changer: Fanuc 10M/CRT
Table: Width 17.7 "
Length 35.4 "
Maximum Table Load 660 lbs
Travels:
X-Axis Travel 22 "
Y-Axis Travel 16.1 "
Z-Axis Travel 18.1 "
Spindle Speed: 80-8,000 rpm
Spindle Taper 40
Main Motor (HP) 7.5 hp
Tool Changer: 20 Position ATC
Equipped With: Mori-Seiki (Add On) Pallet System
|
|
| Ad # 4301 | Vertical Machining Centers (VMC) |
| 1996 |
Cincinnati |
Arrow 500 |
Good |
SOLD |
Photo /
More Info. |
| Cincinatti Arrow 500 VMC: Travels:
X = 20"
Y = 20"
Z = 20"
Spindle: CAT 40
ATC: 21 Station
Fanuc CT Control |
|
| Ad # 12911 | Vertical Machining Centers (VMC) |
| 2000 |
Haas |
VF-OE |
Good |
sold |
Photo /
More Info. |
| 20 tool: Haas VF-OE CNC Vertical milling center with 20 tool automatic changer.
30 x 16 x 25 travels
20Hp,
10,000RPM,
Rigid Tapping,
Cutting time 2,406 hrs.
with 32 Cat 40 tool holders, 2 Kurt 6" Vises, 11 driil chucks, 6 large shell, 3 small shell, 10 fixed tool, 2 fly cutters,
480 volt step down transformer included 3 phase machine,
Pickup only in VA |
|
| Ad # 14437 | Vertical Machining Centers (VMC) |
| 1981 |
Mazak |
V20 |
Fair |
sold |
Photo /
More Info. |
| —: Mazak V20 with pallet changing. Was working great
when it was powered down in 2006. Hasnt been
on
since. |
|
| Ad # 8011 | Vertical Machining Centers (VMC) |
| 2006 |
Twin Horn |
VA-500 |
New |
Sold |
Photo /
More Info. |
| 20 x 16, 10HP, 8000 RPM, 16 tool arm type toolchanger VMC: Twin Horn Model VA-500 VMC,complete with turcite coated and precision scrap... |
|
| Ad # 8012 | Vertical Machining Centers (VMC) |
| 2005 |
Twin Horn |
VH-850 |
Demo Machine |
Sold |
Photo /
More Info. |
| 34 x 20 ,15HP, 8000 RPM, 24 tool arm style VMC: Twin Horn Model VH-850 VMC,complete with turcite coated and precision scrap... |
|
| Ad # 9019 | Vertical Machining Centers (VMC) |
| 1989 |
Hurco |
CNC-BMC 20 |
Good |
Sold |
Photo /
More Info. |
| xyz travels / 22" x 14" x 14" cap 550lbs.: Under power and used periodically.
Has Ultramax control
10 HP w/6000 rpm range.
40 Taper Spindle rebuilt 5 yrs. ago.
travels: 22 x 14 x 14.
Table 30" x 14"
16 Station Toolchanger
Std. specs below-please verify.
Hurco BMC20 with Ultimax Dual Screen Conversation Control (Conversational CRT & Graphics CRT)
Overall Table Dimensions 33.75" x 15.75"
Working Surface 30.125" x 13.75"
Max. Table work load 550 lbs.
Travels 22" x 14" x 14"
Spindle Taper 40
Spindle Speeds (2 Ranges) 60 - 6,000 rpm
Automatic Tool Changer 16 stations
Net Weight 5,500 lbs
Floor Space 94" x 111" x 136"
Standard Features Include:
Ultimax Dual Screen Conversational/Graphics Control with G Code Programming Capabilities
RS232 Port
Full Enclosures
All Available Manuals
|
|
| Ad # 6923 | Vertical Machining Centers (VMC) |
| 1996 |
OKK |
PCV-55 |
Very Good |
sold |
Photo /
More Info. |
| OKK MODEL PCV-55 VERTICAL MACHINING CENTER: OKK MODEL PCV-55 VERTICAL MACHINING
CENTER
Table Size: 48" x 22"
Maximum Table Load: 1540 Lbs
Distance Spindle Nose to Table: 5.9" - 26.3"
X-Axis Travel: 40"
Y-Axis Travel: 22"
Z-Axis Travel: 20.4"
Rapid Traverse Rate (X,Y): 787 IPM
Rapid Traverse Rate (Y): 629 IPM
Cutting Feed Rate: .1 - 393 IPM
Spindle Taper: CAT 50
Spindle Speeds: 100 - 10,000 RPM
Spindle HP: 30/25
Tool Changer Capacity: 20 Stations
EQUIPPED WITH:
Fanuc 18M CNC Control
RS-232C Port Interface
Rigid Tapping
Spindle Oil Chiller
(20) Stations ATC
Coolant System
$ 59,500.00 |
|
| Ad # 6924 | Vertical Machining Centers (VMC) |
| 1995 |
FADAL VMC-15XT |
914-15 |
Very Good |
SOLD |
Photo /
More Info. |
| FADAL VMC-15XT MODEL 914-15 CNC VERTICAL MACHINING CENTER: FADAL VMC-15XT MODEL 914-15 CNC VERTICAL MACHINING CENTER
Table Size: 30" x 16"
Maximum Table Load: 2000 Lbs
X-Axis Travel: 30"
Y-Axis Travel: 16"
Z-Axis Travel: 28"
Spindle Taper: CAT-40
Spindle Speed: 75 - 7,500 RPM
Spindle Motor HP: 10
Cutting Feed Rate: 400 IPM
Rapid Speed: 410 IPM
Tool Changer: 8 ATC
Wax. Tool Diameter: 3.5"/4.5"
Max. Tool Weight: 15 Lbs
Max. Tool Length: 15"
Distance Spindle Nose to Table Top: 4" - 42"
EQUIPPED WITH:
Fadal 88HS CNC Control
(21) Position Automatic Tool Changer
Pre-Wired 4-th Axis
Full Enclosure |
|
| Ad # 11700 | Vertical Machining Centers (VMC) |
| 1979 |
Roku-Roku |
Vertimac-0 |
Very Good |
sold |
Photo /
More Info. |
| 16" x 20" x 12": Roku-Roku
Vertimac-0
Serial 3296
Travels
16" x 20" x 12"
8 Tool Turret
220 Volt
Fanuc System 5M
Liner Ways |
|
| Ad # 11699 | Vertical Machining Centers (VMC) |
| 1979 |
roku-roku |
vertimac-1x |
Needs Work |
sold |
Photo /
More Info. |
| 20" x 30" x 16": Roku-Roku
Vertimac 1X
Serial 731
1979
30 Tool Turret
220 volt
Travels
20" x 30" x 16"
Square Ways
Fanuc System 5M
|
|
| Ad # 4242 | Vertical Machining Centers (VMC) |
| 1990 |
Hurco |
BMC-20 |
Very Good |
Sold |
Photo /
More Info. |
| HURCO BMC-20 with ULTIMAX II CONTROL: Table:
Width 15.7 "
Length 33.7 "
Travels:
X-Axis Travel 22 "
Y-Axis Travel 14 "
Z-Axis Travel 14 "
Spindle Speed: 60 - 6,000 rpm
Spindle Taper: CAT 40
Spindle Motor: 7.5 hp
Tool Changer: 16 Station ATC |
|
| Ad # 12855 | Vertical Machining Centers (VMC) |
| 1998 |
Hurco |
BMC30/SSM |
Good |
sold |
Photo /
More Info. |
| 15" x 40": Hurco BMC 3017 BMC30/SSM
Year 1998
X:30" / 762mm
Y:18" / 457.2 mm
Z:24" / 609.6 mm
Power:10hp / 7.5 kW
ATC:24
Table-W:40" / 1,016mm
Table-L:15.700 " / 398.8 mm
Taper:CAT-40
Wired 220/ 3 Phase |
|
| Ad # 12856 | Vertical Machining Centers (VMC) |
| 1999 |
Hurco |
BMC2416/SSM |
Good |
sold |
Photo /
More Info. |
| —: Hurco BMC2416/SSM
Wired 220/3 Phase
Table ........................................... 29.5" x 15.7"
Max Load on Table ................... 760 lbs
Travels, X-Axis ........................... 24”
Travels, Y-Axis ........................... 16”
Travels, Z-Axis ........................... 22”
Main Motor ................................. 10 HP
Spindle Speed .......................... 80 - 8,000 RPM
Spindle Axis Torque/RPM ….. 100 ft-lb / 500 (30 min)
Spindle Taper ............................ CAT 40
ATC .............................................. 24 (Swing Arm)
Rapid Traverse ……….….……. 945 IPM (X,Y)
Rapid Traverse ……….….……. 590 IPM (XZ)
Max Thrust Rating …….….…... 1450 lbs. (X,Y) 2490 (Z)
Operating Dimensions ……….. 139" W x 135" D x 103" H
Shipping Dimensions ………… 89" W x 116" D x 96" H
Machine Weight …..………….. 9,040 lbs
|
|
| Ad # 11682 | Vertical Machining Centers (VMC) |
| 1980 |
United States Machinetool |
16B |
Very Good |
sold |
Photo /
More Info. |
| 30" x 48": United states machine tool CNC
Model 16b
30" x 48" Table
32" Throat
20" Z Travel
Dynapath System 10 cnc |
|
| Ad # 14376 | Vertical Machining Centers (VMC) |
| 2008 |
Sharp |
SV 2412 |
Excellent |
sold |
Photo /
More Info. |
| X 24" x Y 12" x Z18": Used Sharp SV 2412 CNC Mill in very good
condition.
•The Entire Machine Base is Built from One
Piece Cast Iron, which Provides up to Ten Times
the Dampening Capacity of Welded Steel
•Induction Hardened and Precision Ground
Box Ways, with Matching Surface Coated with
TURCITE
•Precision Ground Table
•2 Nozzles at each side of Base Flush away
Chips
•Flexo-Metal Way Covers at each side of
Table Fully Protects the Table Ways and
Ballscrew
•Roll-Out Coolant Tank
•Three Pull-Out Chip Drawers for Easy
Cleaning
Less than 3000 Hrs under power and about
800hrs operating and cutting time on clock.
Specifications:
-7.5/10hp Fanuc Spindle Motor
-8,000 RPM High Performance Spindle
-Travel X,Y,Z - axis 24 12 18
-Box Way Construction
-Fanuc OiMate Mc Control
-400 Work Offsets
-48 Work Coordinates
-400 Registered Part Program Storage
-Fanuc Macro
-Fanuc High Speed Skip Function
-Spare Function (4)
-Fanuc (Auto Measure System) XYZ
-Memory Card Reader in Front
-Remote Jog Handle
-Fanuc Monochrome LCD Screen
-Fanuc Digital Drive System
-10 Pocket Automatic Tool Changer-Umbrella
Type.
-SMART Automatic Lubrication System
-Coolant System w/adjustable nozzles (3)
-Large 42 Gallon Roll Out Coolant Tank
-(Nice) Chip Flushing Nozzles at Both Sides
of Chip Pan
-Belt and Auger Conveyor
-Rigid Tap
-Full Metal Enclosure w/Removable Side
doors
-Manual Guide Computer Assist Program
-Certified MEEHANITE castings ( Nice) Heavy
and Strong
-Induction Hardened and Precision Ground
Box Ways (XYZ)
-C-3 Grade Precision Ball Screw
-Halogen Work Light
SPINDLE
-Taper Cat 40
-Spindle Motor 7.5/10 HP
-Spindle Speed 8,000 RPM
-Standard Torque 51 ft lb @ 1,200 RPM
-Automatic Tool Changer
-Tool Capacity 10 Tools- ATC Type Umbrella.
-Max tool weight 17 Lbs
-Selection Method BI-DIRECTIONAL
-Tool Change time 6.5 seconds
FEED RATES
-Rapid Traverse (All 3 Axis) 1181 IPM
(30M/Min)
-Cutting Feed Rate (Max) 393 IPM (10M/Min)
-Axis Motor (X,Y,Z,) 2.4,2.4,3.4 HP
Max Thrust Rating X & Y Axis Motor 3500 lb
Max Thrust Rating Z Axis Motor 5,150 lb
Ball Screw Diameter & Pitch ( X,Y,Z,) 32mm
x 10mm
ACCURACY
-Positioning +/- .0001 (0.003mm)
-Repeatability +/- .0001 (0.003mm)
MISCELLANOUS
-Approximate Weight 6100 lbs
-Dimensions of Machine 73 x 74 x 92.5 (
Even if you use auger conveyor)
Belt Conveyor 121 x 74 x
92.5
-POWER REQUIREMENTS 220V/3 Phase/ 60 Hz .
15 KVA
Air Requirements 5 CFM @ 100 PSI
-Door Opening 26.8
|
|
| Ad # 13643 | Vertical Machining Centers (VMC) |
| 2004 |
Atrump |
B5ACW |
Good |
sold |
Photo /
More Info. |
| X:34" Y:20" Z:24": Centroid M400AC Control,
travel:X:34" Y:20" Z:24"
1000 Watt axis motors, Software will be updated by Atrump and machine "Tuned Up" by Atrump before it leaves my facility. Machine has only been used on non ferrous materials and probably has less than 1000 spindle hours on it. Spider Cool Programmable Coolant system installed ($3500.oo option), Coolant filter and tramp oil skimmer included, Centroid RT-150 AC 4th axis included ($8K option), Rigid tapping, Tool probing,4th axis, Machine has been well cared for and is very low hours. Extra parts (tool holder forks, o-rings and seals, spare motherboard.
Machine is under power and can be inspected in CA by appointment. |
|
| Ad # 10849 | Vertical Machining Centers (VMC) |
| — |
Matsuura |
— |
Good |
sold |
Photo /
More Info. |
| Travels: X 20" Y 14" Z 17". : This is a great milling machine, that works fine, and is extremely accurate... |
|
| Ad # 4125 | Vertical Machining Centers (VMC) |
| New |
Victor |
FV-32A |
Demo Machine |
sold |
Photo /
More Info. |
| Victor FV-32A w/ Mitsubishi M3 Control: Travel (X) 31.5"
Travel (Y) 17.7"
Travel (Z) 20"
Spindle Motor 7.5 HP/10 HP (cont./ 30 min.)
Spindle RPM:Standard 60-6,000 rpm (Belt type);
Opt.: 100-10,000 rpm (Belt type) & 100-12,000 rpm
(Belt type)
No. of Tool Pos. 18 20
Accuracy +0.0005”
Repeatability +0.0001”
Tools: 20
Tool shank: Taper 40
Max. Tool Weight: 13.2 lbs.
Max. Tool Length: 3.8"
Max. Tool Diameter: 3.1"
Tool Change Time: 3.5 seconds
|
|
| Ad # 4126 | Vertical Machining Centers (VMC) |
| New |
Victor |
VMC 2615 |
Demo Machine |
sold |
Photo /
More Info. |
| Victor VMC-2615 Machining Center w/ Fanuc 0-M: Travel (X) 19.7"
Travel (Y) 15.8"
Travel (Z) 15.8"+3.94"
Spindle Motor 3.5kw (cont)5,5kW (30 min)
Spindle RPM 60-6,000 rpm
No. of Tool Pos. 16 24 20
Accuracy ±0.00039”
Repeatability ±0.00012”
Number of Tools 16
Tool Holder Taper 40
Max. Tool Weight 15.4 lbs.
Max. Tool Length 9.84"
Max. Tool Diameter 3.15"
|
|
| Ad # 2166 | Vertical Machining Centers (VMC) |
| 1989 |
TMG |
5020 |
Very Good |
sold |
Photo /
More Info. |
| Machining Center: 47" x 16" Table
4 Axis
GN11 Controls
Complete set of manuals
Side mount Tool Changer |
|
| Ad # 15627 | Vertical Machining Centers (VMC) |
| 2015 |
Mazak |
Universal 500C |
Excellent |
sold |
Photo /
More Info. |
| 500mm x 1000 mm: 2015 madam 500c universal
Low hours
Mazatrol Smart Control
Includes Chip Elevator and
assortment of
tooling
MAZATROL Smart Control
10.4” Colro SCD
EIA/ISO code input functions
USB I/F Compact Flash Reader
Absolute Encoder System
19.68” X 39.37” (500mm x 1000mm)
table w/ taped
holes
20 Tool magazine (CAT 40)
Main spindle motor AC 20 HP
Spindle Speed 10000 RPM (CAT 40)
Renishaw OTS-AA Optical tool
setter
Through spindle cooling
Manuals
|
|
| Ad # 14352 | Vertical Machining Centers (VMC) |
| 1996 |
Saeilo |
FMV-1700 |
Good |
sold |
Photo /
More Info. |
| 31 x 71" table size: 1996 Saeilo FMV-1700 CNC Vertical Machining Center
Specifications:
31" X 71" Table Size
Travels:
X-Axis30”
Y-Axis30”
Z-Axis60”
Spindle Speed4,000 RPM
Spindle Motor20 HP
Number of Tools24 ATC
Spindle TaperCAT 50
Equipped With:
Fanuc O-M Control |
|
| Ad # 9738 | Vertical Machining Centers (VMC) |
| 2006 |
Daewoo |
DMV-3016L |
Very Good |
sold |
Photo /
More Info. |
| 32 x 16 x 20 travels-12K spindle RPM: FEATURES
* Fanuc Control
* 12,000 RPM spindle-option included
*Powerful 15 hp high torque spindle motor
*Cartridge spindle design
* High precision spindle with two double-row
cylindrical
roller bearings and two angular contact bearings.
* Spindle Air blow (M14)
* Spindle orientation
* Spindle speed override 10 - 150%
* Rigid tapping
Custom Macro B (User Definable)
{ Memory random double arm type (24) ATC
* Portable Manual pulse generatorraw;
* Program and data protection key switch
* Massive One-piece Meehanite cast iron bed
* Wide induction hardened and precision ground box way construction
* Low friction Reulon mating way surfaces
* Servo motors mounted directly to the oversized ballscrews
* Double Pre-tensioned Baliscrews
* Fast 1,181 IPM Rapid Traverse rate
* Metered piston distributor lubrication
Telescopic covers
* Base Flush Chip Disposal
Full enclosure splash guard
* Flood coolant with large separate coolant tank
Work light
* Operator call lamp (red, yellow, green)
Instruction manual, parts list, and electrical drawings
* Fanuc operator and maintenance manuals
SPECFICATIONS -General -verify
CAPACITY:
X axis travel32.2 inches
Y axis travel16.1inches
Z axis travel20.1 inches
Table loading area17.7 x 39.4 inches
Allowable table load1,320 pounds
Table T - slot spacing x width(4)-4.92x.71
SPINDLE:
Spindle nose to table top5.9 to 26,0 inches
Column to spindle center17.7 inches
Spindle taperISO No. 40
Spindle speed8,000 RPM
AC spindle motor (30 min.)15 HP
Spindle torque (30 min.)102 ft-lbs.
AUTOMATIC TOOL CHANGER:
Number of Tools24
Tool ShankCAT 40
Pull Stud (retention knob supply company #)711-23
Max. Tool Dia.3.5
Max. Tool Length9.8 inches
Max. Tool Weight17.6 lbs.
MOTION:
X and Y axis rapid traverse rate1,151IPM
Z axis rapid traverse rate708 IPM
Cutting feed rate04- 315 IPM
Least command increment0001"
" Positioning accuracy+/-,00020" (full stroke)
Repeatability+/-.00008"
GENERAL:
Floor Space Required (W x D)117" x 94"
Machine Weight11,000 lbs.
Voltage required - Fanuc205-235 Volts / 3 Phase
Power required35 KVA
|
|
| Ad # 2109 | Vertical Machining Centers (VMC) |
| 1986 |
Mori-Seiki |
MV 55/50 |
Good |
Sold |
Photo /
More Info. |
| Quality Heavy Duty VMC: MORI SEIKI VERTICAL MACHINING CENTER
MODEL #MV 55/50 S/N 741 NEW: 1986
SPECIFICATIONS:
Table Size 55" x 21.65"
Table Load Capacity 2200 lbs.
X-Axis Travel 40"
Y-Axis Travel 21.65"
Z-Axis Travel 21.65"
Table to Spindle Nose 9.8"-31.55"
Spindle Drive Motor 15 HP AC
Spindle Taper CAT #50
Spindle Speeds 20-3500 RPM
Cutting Feed Rates 0.04-140 IPM
Rapid Traverse Rates 394 IPM
Number of Tools 24
Max. Tool Weight 33 lbs.
Max. Tool Length 14"
Machine Weight 18,889 lbs.
THIS MACHINE IS EQUIPPED WITH THE FOLLOWING:
* Yasnac MX2 CNC Control
* Partial Enclosure
* Chip Conveyor
* 24 ATC
|
|
| Ad # 11597 | Vertical Machining Centers (VMC) |
| 2001 |
Daewoo |
DMV-3016 |
Very Good |
sold |
Photo /
More Info. |
| travels: 32 x 16 x 20: 2001 DAEWOO DMV-3016
Travel: X-Axis 32.2"
Y-Axis 16.1"
Z-Axis 20.1"
Table Size 39.3" x 16.7"
Spindle Speed 12,000 RPM
Spindle Taper Cat 40
Spindle Nose to Table Top 5.9" - 26"
Spindle Motor 15 HP
Tools 24
Table Load Capacity 1320 lbs.
Rapid Traverse Rates (X & Y / Z) 945 / 708 IPM
Max Tool Diameter 3.54" / 5.9"
Max Tool Length 9.8"
Max Tool Weight 17.6 lbs.
Machine Dimensions (L x W x H) 116" x 94" x 108"
Machine Weight 12,100 lbs.
FEATURES:
FANUC 0i-MB CNC CONTROL
10.4" Color LCD
Graphic Display
Rigid Tapping
Inch / Metric Conversion
Helical Interpolation
(24) Position Side Mount Tool Changer
Coolant Thru Spindle (290 psi CoolJet)
Remote Manual Pulse Generator
Turbo Chip Conveyor
12,000 RPM Spindle Speed
Spindle Chiller Unit
Indexer Interface
Three Color Tower Light
Heavy Duty Box Way Construction
Mfg Date May 2001
|
|
| Ad # 6800 | Vertical Machining Centers (VMC) |
| 1998 |
Yang |
Eagle SMV-600 |
Very Good |
Sold |
Photo /
More Info. |
| 1998 Yang Eagle SMV-600: 1998 Yang Eagle SMV-600
Mitsubishi Control
23" x 16" x 20" Travel
Cat 40
6000 RPM
7.5 HP
16 ATC |
|
| Ad # 5356 | Vertical Machining Centers (VMC) |
| 1993 |
OKUMA |
MC-4VAE |
Excellent |
Sold |
Photo /
More Info. |
| MC-4VAE OKUMA 3-axes CNC Vertical Machining Center w/20 ATC: Basic Information
Category
CNC Machining Centers
Sub-Category
Vertical
Manufacturer
OKUMA
Model
#MC-4VAE
Year
1993
Size
3-axes
Item # 4103 -- Full Description
#MC-4VAE OKUMA 3-axes CNC Vertical Machining Center with 20 ATC,new 1993
Table working surface 20.08” x 39.37”
Table load capacity 2,200 lbs.
Extended X-axes travel to 30”
Y-axis travel 16.14”
Z-axis travel 17.72”
Taper in spindle CAT-40
Rapid feed rates 591 IPM (X + Y), 512 IPM (Z)
Spindle speeds to 6,000 RPM
EQUIPPED WITH:
2 geared ranges
20 automatic toolchanger
Way covers
Flood coolant with splash guards
Worklight
10/ 7 ˝ H.P. spindle drive
OKUMA OSP-5020 3-axes CNC control, swing pendant mount, color CRT, graphic display, floppy drive, animation, EC processor, hand held remote pulse generator, RS-232C port, 4M bubble memory
Wired for 3/60/480 volt operations
Condition: Very good
|
|
| Ad # 6797 | Vertical Machining Centers (VMC) |
| 1995 |
Supermax |
Rebel 1 |
Very Good |
sold |
Photo /
More Info. |
| 1995 Supermax Rebel 1: 1995 Supermax Rebel 1
Travels 25.59" x 15.7" x 18.1"
CAT 40
6000 RPM
16 ATC
RS232 Port |
|
| Ad # 6793 | Vertical Machining Centers (VMC) |
| 1991 |
Mitsubishi |
MV-65-C |
Very Good |
sold |
Photo /
More Info. |
| 1991 Mitsubishi MV-65-C: 1991 Mitsubishi MV-65-C
Mits M 330 Control
49" x 27" x 25" Travel
20 HP
2 Speed 6,000 RPM
Cat 50
24 Side Arm ACT
Boxed Way |
|
| Ad # 15345 | Vertical Machining Centers (VMC) |
| 1980s |
Enshu |
VMC650 |
Fair |
sold |
Photo /
More Info. |
| 20000lbs: Enshu cnc milling machine
Highest Spindle Speed (RPM): 3501 - 4000
Model: VMC-650
Spindle Horsepower: 20 Type: CNC, Vertical
Serial Number: 327
X-Axis Travel Bed: 41'' - 60''
Table Length: 60'' - 79.9''
Y-Axis Travel Bed: 21'' - 25''
Table Width: 25'' - 29.9''
Z-Axis Travel Bed: 21'' - 25''
Country of Manufacture: Japan
note: general specs please verify actual
machines |
|
| Ad # 6791 | Vertical Machining Centers (VMC) |
| 2001 |
Miltronics |
RW-30 |
Excellent |
sold |
Photo /
More Info. |
| 2001 Miltronics RW-30: 2001 Miltronics RW-30
Travels 60" x 30" x 26"
CAT 50
4,5000 RPM
40 HP
32 ATC
Spindle Chiller
Rigid Tap
3.5" Floppy Drive |
|
| Ad # 6789 | Vertical Machining Centers (VMC) |
| 1999 |
Matsuura |
RA-1G |
Very Good |
sold |
Photo /
More Info. |
| 1999 Matsuura RA-1G: 1999 Matsuura RA-1G
Yasnac J300 Control
20"x 15.75"x 18" Travel
CAT 40
10 HP
8,000 RPM
30 ATC
Chip
Coolant Thru |
|
| Ad # 6786 | Vertical Machining Centers (VMC) |
| 2000 |
Johnsford |
SV-32 |
Very Good |
Sold |
Photo /
More Info. |
| 2000 Johnsford SV-32: 2000 Johnsford SV-32
Fanuc 18M
31.5" x 20" x 24" Travel
CT-40
15 HP
24 ATC
Chip
15,000 RPM
High Speed Machining (HPCC)
RISC
Data Server |
|
| Ad # 6783 | Vertical Machining Centers (VMC) |
| 1998 |
Hyundai |
SPT V100 |
Very Good |
Sold |
Photo /
More Info. |
| 1998 Hyundai SPT V100: 1998 Hyundai SPT V100
24 Side MT ATC
10,000RPM
CAT 40
Yasnac J50M
15HP
31"x18"x24" Travels
SMW Indexer |
|
| Ad # 11590 | Vertical Machining Centers (VMC) |
| 2002 |
Daewoo |
DMV-3016 |
Very Good |
sold |
Photo /
More Info. |
| 32 x 16 x 20: 2002 DAEWOO DMV-3016
Travel: X-Axis 32.2"
Y-Axis 16.1"
Z-Axis 20.1"
Table Size 39.3" x 16.7"
Spindle Speed 8000 RPM
Spindle Taper Cat 40
Spindle Nose to Table Top 5.9" - 26"
Spindle Motor 15 HP
Spindle Torque 103.4 ft. lbs.
Tools 24
Table Load Capacity 1320 lbs.
Rapid Traverse Rates (X & Y / Z) 945 / 708 IPM
Max Tool Diameter 3.54" / 5.9"
Max Tool Length 9.8"
Max Tool Weight 17.6 lbs.
Machine Dimensions (L x W x H) 116" x 94" x 108"
Machine Weight 12,100 lbs.
FEATURES:
FANUC 0i-MB CNC CONTROL
10.4" Color LCD
Graphic Display
Rigid Tapping
Inch / Metric Conversion
Helical Interpolation
Background Editing
Coolant Thru Spindle (290 psi CoolJet)
24 Position Side Mount Tool Changer
Remote Manual Pulse Generator
Turbo Chip Conveyor
Three Color Tower Light
Heavy Duty Box Way Construction
|
|
| Ad # 6764 | Vertical Machining Centers (VMC) |
| 1998 |
Bridgeport |
TC-3G |
Very Good |
Sold |
Photo /
More Info. |
| 1998 Bridgeport TC-3G: 1998 Bridgeport TC-3G
7500 RPM
30 x 16 x 20 Travel
9 HP
BT 40
22 ATC
DX Control
Rigid Tap |
|
| Ad # 14318 | Vertical Machining Centers (VMC) |
| 2001 |
Atrump |
B5AC-184 |
Excellent |
sold |
Photo /
More Info. |
| 34" X 20": Specifications
ITEMB5AC-W
Work Table1042mm x 406mm (41" x 16")
Table T-slots (WxN)18mm x4 (0.71")x4
Table load max.450 kgs (992 lbs) (center)
X-axis travel861mm (33.9")
Y-axis travel508mm (20")
Z-axis travel610mm (24")
Spindle nose to table surface120 ~ 730mm (4.7" ~ 28.7")
Spindle center to column550mm (21.6")
Table surface to floor830mm (32.7")
Spindle taperCAT #40 (or BT #40 -- OPT.)
Spindle speed6000 R.P.M.
Spindle motor10 HP (5.5 / 7.5 Kw)
Axis motor1 Kw
ATC TypeArmless type
Coolant pump motor1/2 HP
Cutting feed3 M/min (118 ipm)
Rapid feed4 M/min (158 ipm)
Max. tool diameterŘ 100mm (Ř 3.94")
Max. tool length275mm (10.8")
Max. tool weight6.5kgs (14 lbs)
Weight (Approx.)2000 kgs (4410 lbs)
|
|
| Ad # 6767 | Vertical Machining Centers (VMC) |
| 1997 |
Cincinnati |
Arrow 1000 |
Very Good |
Sold |
Photo /
More Info. |
| 1997 Cincinnati Arrow 1000: 1997 Cincinnati Arrow 1000
40" x 20" x 22"
21 ATC
6000 RPM
40 Taper
A2100 Control
10 HP
Rigid Tap |
|
| Ad # 13556 | Vertical Machining Centers (VMC) |
| 1996 |
Leblond Makino |
FNC 125 LA-24 |
Excellent |
sold |
Photo /
More Info. |
| 9405" X 27.5" table size: FNC 125 LA-24, CNC Vertical Mill, 3 Axis
Leblond-Makino FNC 125 LA-24
Control:Fanuc OMC
TABLE:
- Table Length: 94.5"
- Width: 27.5"
- Max Table Load:
TRAVELS:
- X-Cross/Long: 80"
- Y-Saddle: 27.5"
- Z-Spindle/Vert: 27.5"
- Distance Spindle Nose to Table Surface (min):
9-3/4"
FEED RATES:
- Rapid Rate: 300 IPM
- Cutting Rate: 0 - 150 IPM
SPINDLE:
- Speed Min. - Max. RPM: 0 - 3500 RPM
- Motor HP (30 Min.): 15 HP
- Taper: CAT 50
Full machine rebuild in 1996
Equipped With:
24 Position Tool Magazine
4th Axis Ready
Helical Interpolation
Thread Cutting
99 Tool Offset Pairs
120 MByte Program Storage
I/O Interface (RS-232 Port)
Oilmatic
Comments:
Machine rebuilt in 1996 by Leblond Factory
authorized rebuilder:
New GE Fanuc OMC Control with CRT
New Ball Screws
Rebuilt DC Spindle Drive Motor and New Spindle
Drive Controller
Rebuilt DC Axis Drive Motors
Rescraped Ways
Reground Table Surface
All New Hydraulic Lines |
|
| Ad # 12735 | Vertical Machining Centers (VMC) |
| — |
Deckel |
FP3NC |
Good |
sold |
Photo /
More Info. |
| 17" x 27": Deckel FP3NC
Seimens Controll CNC 3M Deckel
17" x 12" x 15"
Cat 40 Spindle
Wired 220/3 Phase
3100 RPM Spindle speed Max. Gear Drive
RS 232 Port |
|
| Ad # 3698 | Vertical Machining Centers (VMC) |
| — |
MillPort |
VMC-1000 |
Fair |
Sold |
Photo /
More Info. |
| LARGE MILLPORT VMC: — |
|
| Ad # 10695 | Vertical Machining Centers (VMC) |
| 1994 |
Haas |
VF3 |
Very Good |
Sold |
Photo /
More Info. |
| 40" x 20" x 25" : 40" x 20" x 25"
40 BT taper
Rigid tap
20 ATC,
30 tool holders,
3 kurt vises,
15 HP,
7500rpm
chip auger,
BT-40 |
|
| Ad # 6696 | Vertical Machining Centers (VMC) |
| 2000 |
Hyundai |
SPT-V30T |
Very Good |
sold |
Photo /
More Info. |
| HYUNDAI MODEL SPT-V30T CNC VERTICAL MACHINING CENTER: HYUNDAI MODEL SPT-V30T CNC VERTICAL MACHINING CENTER
SPECIFICATIONS:
PALLET SIZE................................:
CROSS TRAVEL (X)...........................: 19.69"
VERTICAL TRAVEL (Y)........................: 11.81"
LONGITUDINAL TRAVEL (Z)....................: 11.81"
SPINDLE SPEEDS.............................: 10-8,000 RPM
SPINDLE DRIVE..............................: 5/7.4 HP
SPINDLE TAPER..............................: ISO 30
CONTROL TYPE...............................: YASNAC MX-3
EQUIPPED WITH:
FULL 4TH AXIS
14 ATC
RIGID TAPPING |
|
| Ad # 15343 | Vertical Machining Centers (VMC) |
| 2007 |
OKUMA |
MC-V4020 |
Good |
sold |
Photo /
More Info. |
| 40 x 20: 2007 Okuma MC-V4020 CNC Milling Center
THINC Control
15,000rpm Spindle
32 ATC
P200 Windows XP
Chip Blaster TSC
Transformer Multi-tap
Turbo Microfine Chip Conveyor
Renshaw OMP4O Probe
Renshaw NC-3 Tool Laser
8" Vise
|
|
| Ad # 14307 | Vertical Machining Centers (VMC) |
| 1999 |
Haas |
VF-1 |
Excellent |
sold |
Photo /
More Info. |
| Table: 26" x 14": Haas Vertical Machining Center (high
torque,30HP
Model: VF-1
Capacity: Table 26" x 14"
Travels:
X-Axis 20”
Y-Axis 16”
Z-Axis 20”
30HP High Torque power machine and 2 speed
Gear
Box
New "windows" purchased directly from Haas
and
installed last year ($1,140.00)
Upgrades for this machine:
30 HP spindle
10,000 RPM spindle
Programmable Coolant
Chip Auger
4th Axis Prewire
Haas QuickCode
Rigid Tap
Brushless Servos
USB (converted from floppy drive)
|
|
| Ad # 3563 | Vertical Machining Centers (VMC) |
| 2004 |
Milltronics |
RW-30 |
Excellent |
Sold |
Photo /
More Info. |
| Full 5-Axis 60" x 30" VMC - Incl. 5-Axis Tables: X,Y,Z = 60 x 30 x 26
Table = 63 x 23.5
Table Capacity = 6,000 lbs
Spindle Range = 25 - 4,500 rpm
Spindle HP = 30/25 hp
Spindle Bearing Diameter: = 100 mm
Standard Features:
·Fully Hardened and Ground Box Ways with Turcite Surfaces and Precision Ground Ball Screws
·PC-based CPU includes 6 Mb DiskOnChip® Parts Storage Memory Non-volatile motionless disk
·12" LCD Active Matrix Color Display with Discrete Keys
·8 Mb Virtual Disk / RS-232 with DNC Buffer and Large Program Management Software
·1300 Block/Sec High Speed Processor
·Conversational plus G & M Code Programming with 3-D Part & Tool Path Graphics
·Engraving, Helical Interpolation, Auto Routines, and User-definable Macros with Trig Assist
·Coordinate Rotating, Scaling, Mirror Image, Thread Mill and Non-Descript Pocket Clear Cycle
·Five Axes Simultaneous Interpolation Software and Interface Servos separate
·Auxiliary Keyboard Port for PC Keyboard
·Automatic Axes Thrust Bearing Lubrication
·Automatic Metered Lubrication w/Low Lube Fault
·Spare “M” Function and CNC “Wait” Channel
·Operator's Station Electronic Handwheel plus Handwheel Controlled Program Execution
·1.44 Mb Floppy Drive
·High Torque AC Digital Servo Drives
·Spindle Taper Air Blow Out
·Two Speed High Torque Closed Loop Spindle Drive RW30 has 30/25 HP (22/18 kW)
·Spindle Load Meter
·Work Lamps
·Full Metal Enclosure
·Automatic Home Sequence with Home Switches
·Spindle Chiller standard on RW30
·#50 4500 RPM Spindle Cartridge on RW30
·Metal Way Covers in Front and Rear of Saddle and Column
·Outrigger Linear Ways on RW30
·ARM Type ATC: 32 Stations
·High Pressure Flood Coolant System with Dual Nozzles
·Tool Release Button·LCD Hour Meter
·Air Blast Hose
·Chip Drawer Chip Removal System
·Wash Down Hose
·Most Software Upgrades Included in Base Price
·All Axes Laser Were Calibrated and Ballbar Inspected when new
|
|
| Ad # 14291 | Vertical Machining Centers (VMC) |
| 1997 |
Boston Digital |
505-HSK |
Good |
sold |
Photo /
More Info. |
| 40" x 12.5" x 17"-5 axis: Bostomatic 505 milling center
table size: 76" x 16"
40" x 12.5" x 17"
spindle:5hp
10,000 rpm
5 axis
control: BDC 3200X
tool changer:atc: 18
5th axis trunion,tilt head
Equiped with--need to verify???
Nikken 320mm "A" or "C" axis Rotary Table w/
320 lbs torque
Full Enclosure
18 Station ATC
Chip Conveyor
Renishaw Probe Package
Nozzle Assembly & Manifold around spindle to
allow ATC w/o moving nozzles
Flood Coolant
Wired 480V / 3 Phase / 60 Hz
All Available Manuals |
|
| Ad # 14779 | Vertical Machining Centers (VMC) |
| 1986 |
Matsuura |
MC 800V |
Good |
sold |
Photo /
More Info. |
| 18 x 30 travels: Matsuura MC 800V
Fanuc 11m
1986
230/ 3 Phase
18.11"x 46.06" Table
31 1/2" X-Axis Travel
18.11" Y-Axis Travel
20.08" Z-Axis Travel
Variable Spindle Speeds: 25 to 4,500 RPM,
Geared Head
BT40 Spindle Taper
1,540 lb. Max Table Load
|
|
| Ad # 6616 | Vertical Machining Centers (VMC) |
| 1985 |
MAZAK |
VQC20/50B |
Very Good |
Sold |
Photo /
More Info. |
| MAZAK MODEL VQC20/50B CNC VERTICAL MACHINING : MAZAK MODEL VQC20/50B CNC VERTICAL MACHINING CENTER
TABLE SIZE: 21.6" X 48.8"
TABLE LOAD CAPACITY: 1,764 LBS.
LONGITUDINAL TABLE TRAVEL (X-AXIS): 39.4"
SPINDLE CARRIER TRAVEL (Y-AXIS): 20"
VERTICAL SPINDLE CARRIER TRAVEL (Z-AXIS): 18.1"
DISTANCE, COLUMN FACE TO SPINDLE CENTER: 12.6"
DISTANCE, TOP OF TABLE TO SPINDLE: 7.9" (MIN.)
26" (MAX.)
ATC POSITIONS: 24
MAX.TOOL DIAMETER, ADJACENT POCKET EMPTY: 5.9"
MAX. TOOL DIAMETER, ADJACENT POCKET FULL: 5.1"
MAXIMUM TOOL WEIGHT: 28.7 LBS.
SPINDLE TAPER: #50 CAT
SPINDLE SPEEDS: 20 TO 3150 RPM
MOTOR: 10 HP
EQUIPPED WITH:
MAZATROL CNC CONTROL
SPLASH GUARDS
COOLANT SYSTEM |
|
| Ad # 6609 | Vertical Machining Centers (VMC) |
| 2006 |
Daewoo |
3016L |
New |
Sold |
Photo /
More Info. |
| Daewoo VMC: 30 x 16" travels: Specs:
DMV 3016L
ControlOMI
Travel
X axis30.0 in
Y axis16.1 in
Z axis20.1 in
Table Load1320 lbs
Table Size36.2 x 16.9 in
Spindle Speed8,000 RPM
Rapid Traverse1417 IPM
Type of tool shankCAT40
Tool storage capacity30
Tool selectionmemory random
Tool change time1.5 sec
Spindle Motor15 hp
Power SourceKVA35
240VAC
Machine size
Height 106.4 in
Length x width94.0 x 84.3 in
Weight11,023 lbs
Coolant
Flood coolant
Also through spindle coolant |
|
current group
groups previously viewed
groups not yet viewed
