Year:
| 2004
|
Make:
| Milltronics
|
Model:
| RW-30
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Requires rigger
|
Weight: | 27,000 lbs
|
Dimension: L x W x H | 223" x 125" |
Machine Location:
|
City: |
On Request
|
State: |
Maryland
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- X,Y,Z = 60 x 30 x 26
Table = 63 x 23.5 Table Capacity = 6,000 lbs Spindle Range = 25 - 4,500 rpm Spindle HP = 30/25 hp Spindle Bearing Diameter: = 100 mm
Standard Features: ·Fully Hardened and Ground Box Ways with Turcite Surfaces and Precision Ground Ball Screws ·PC-based CPU includes 6 Mb DiskOnChip® Parts Storage Memory Non-volatile motionless disk ·12" LCD Active Matrix Color Display with Discrete Keys ·8 Mb Virtual Disk / RS-232 with DNC Buffer and Large Program Management Software ·1300 Block/Sec High Speed Processor ·Conversational plus G & M Code Programming with 3-D Part & Tool Path Graphics ·Engraving, Helical Interpolation, Auto Routines, and User-definable Macros with Trig Assist ·Coordinate Rotating, Scaling, Mirror Image, Thread Mill and Non-Descript Pocket Clear Cycle ·Five Axes Simultaneous Interpolation Software and Interface Servos separate ·Auxiliary Keyboard Port for PC Keyboard ·Automatic Axes Thrust Bearing Lubrication ·Automatic Metered Lubrication w/Low Lube Fault ·Spare “M” Function and CNC “Wait” Channel ·Operator's Station Electronic Handwheel plus Handwheel Controlled Program Execution ·1.44 Mb Floppy Drive ·High Torque AC Digital Servo Drives ·Spindle Taper Air Blow Out ·Two Speed High Torque Closed Loop Spindle Drive RW30 has 30/25 HP (22/18 kW) ·Spindle Load Meter ·Work Lamps ·Full Metal Enclosure ·Automatic Home Sequence with Home Switches ·Spindle Chiller standard on RW30 ·#50 4500 RPM Spindle Cartridge on RW30 ·Metal Way Covers in Front and Rear of Saddle and Column ·Outrigger Linear Ways on RW30 ·ARM Type ATC: 32 Stations ·High Pressure Flood Coolant System with Dual Nozzles ·Tool Release Button·LCD Hour Meter ·Air Blast Hose ·Chip Drawer Chip Removal System ·Wash Down Hose ·Most Software Upgrades Included in Base Price ·All Axes Laser Were Calibrated and Ballbar Inspected when new
|
Electrical Description |
- 208-240, 3-Phase muti-tap
|
Comments: |
- ORIGINAL PURCHASE PRICE IN APRIL 2004 WAS APPROX. US$170,000.00
ALSO HAS AN 8" RISER BLOCK IN THE COLUMN Price Includes large Troyke FULL 5-Axis TABLE
50 Taper Spindle
Seller bought machine for a contract that never materialized
|
|