|
User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 12 matching ads. Now displaying the remaining 12 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 4326 | Turning Center 4 - 10 in. chuck |
| 1981 |
Ikegai |
FX25N Chucker(no tailstock) |
Fair |
Sold |
Photo /
More Info. |
| 10" Ikegai Chucker: Fanuc 6TB Control
10" Kitagawa Power chuck with thru hole
Approximate specifications:
2.5" Spindle hole
HP 15
Coolant
2000 RPM |
|
| Ad # 1496 | Turning Center 4 - 10 in. chuck |
| 1983 |
Hardinge |
Super Slant SB-GN |
Good |
sold |
Photo /
More Info. |
| Hardinge Twin Turret 6" Lathe: twin 8 Station Turrets (4-axis for speed)
6" chucker
Swing Over Bed 22"
DBC 30"
Spindle 15 hp
Control Fanuc/GE GN 6TC
RS232
Twin turret machine..
INCLUDES:
Full Documentation
6" 3-Jaw chuck
Collet Chuck that accepts either 16C or 5C collets
Misc collets
Actuator for above chucks
Chip Conveyor
Hardinge Bar Feeder
|
|
| Ad # 7941 | Turning Center 4 - 10 in. chuck |
| 77-78 |
Hardinge |
AHC |
Good |
Sold |
Photo /
More Info. |
| Hardinge AHC Automatic Precision Chucker: 1-1/16" bar capacity
14" swing over ways, 6" over cross slide
12' bar feed
6 position turret
cut-off attachment
Automatic threading attachment
Taper Attachment
Parts Discharge slide
roll-around console control
Hardened and Ground Dovetailed Bed
Coolant system |
|
| Ad # 7942 | Turning Center 4 - 10 in. chuck |
| 1966 |
Hardinge |
AHC |
Good |
Sold |
Photo /
More Info. |
| Hardinge AHC Automatic Precision Chucker: 1-1/16" bar capacity
14" swing over ways, 6" over cross slide
6 position turret
cut-off attachment
Automatic threading attachment
Parts Discharge slide
roll-around console control
Hardened and Ground Dovetailed Bed
Coolant system |
|
| Ad # 6752 | CNC Lathe w/sub Spindle or Live Tooling |
| 1996 |
Nakamura |
TMC-20II |
Excellent |
Sold |
Photo /
More Info. |
| 16" x 18" 2-Axis Nakamura Turning Center with Live Tooling and Barfeed: Control: Fanuc 18-T
Swing Over Bed: 15.75"
Swing Over Carriage: 11.02"
Distance Between Centers: 18.07"
Max. Turning Diameter: 8.66" (when using Live Tools)
Max. Turning Length: 8.26"
Max. Bar Size: 2" diameter
Chuck Size: Standard 8" (This machine fitted with 16-C Collet Chuck)
Axes Travel, X-Axis, 6.39"
Axes Travel, Z-Axis, 13.38"
Spindle Speed Range: 50 - 4,500 rpm (Stepless)
Spindle Nose: A2-5
Spindle Bore: 2.44"
Spindle Power: 15/10 hp or 11/7.5 kW
C-Axis: 7.5 degrees - programmable
Turret Positions: 10
Turret Index Time: 0.2 sec (station-to-station)
Live Tooling Speed Range: 30 - 3,500 rpm (stepless)
No. Of Driven Tool Positions; 10
Rapid Traverse Feed Rates:
X: 629 ipm
Z: 945 ipm
No sub spindle on this machine |
|
| Ad # 8878 | Turning Center 4 - 10 in. chuck |
| 2006/07 |
HURCO |
TM6 |
Excellent |
Sold |
Photo /
More Info. |
| 10in swing x 12.8 in cut length: Capacity:TM6
6" chuck A2-5
X-axis Travel7
Z-axis Travel14
Distance Between Centers15.8"
Swing Over Bed 15.94
Swing Over Cross Slide9.45
Maximum Turning Diameter12.4
Maximum Turning Length13.4
Spindle:
Spindle NoseA2-5
Spindle Speed (RPM)6,000 rpm
Spindle Motor Horsepower (1 min.)17.5
Spindle Motor Torque (1 min.)81.5 ft-lbs @ 1125 rpm
Spindle Chuck6 Diameter
Spindle Bore Diameter2.2
Maximum Bar Capacity1.77
Motion:
X-axis Rapid Feed Rate750 ipm
Z-axis Rapid Feed Rate945 ipm
Least Command Increment0.0001
Positioning Accuracy-/+ 0.0002
Repeatability-/+ 0.0001
Hydraulic Tool Turret:
Number of Stations12
RotationBi-Directional
Turret Index Time (Adjacent).5 Seconds
Turret Index Time (Furthest location)1.5 Seconds
OD vs. ID toolsAny Combination
Tool Shank Width.75 x .75
Maximum Boring Bar Diameter1.25
Power Rating16.25 KVA
Standard Machine Features:
Powerful 15 HP Spindle Motors-6,000RPM
A2-5 Series Spindle Nose
Fast 750/945 ipm Rapid Traverse in X and Z
3-Jaw Chuck including Soft Jaws
Automatic Central Lubrication System
.5 Second Tool Index Time (Adjacent)
Large Work Cylinder
Wide Enclosure Door Openings
Shortest Path Tool Turret Indexing
Flood Coolant Assembly
Standard Control Features:
Conversational Turning Programming
12 Color LCD Monitor
NC (G-code) Programming
Wire Frame Graphics ( Conversational only)
40 GB Hard Drive
2 GB RAM Memory
USB 2.0 Port
Text Input Capabilities
2.8 GHz Pentium 4 Processor
UL/CSA Qualified Certifications
RS-232 Port
12 station turret
.5sec adjacent tool change time
travel:7in X, 14in Z center dist 13.5 in
swing over bed 16 in
swing over cross slide 10"
max turning dia 10" x 12.8 in max length
Single Screen WinMaxฎ Control
The power of the WinMax Control, is the result of Hurco's three decades of customer-centered software experience combined with the proven platform of Microsoft Windows. Power packed with 25 new features and hundreds of enhancements to existing software features, our engineers designed WinMax to maximize efficiency, increase productivity, and improve surface finish. The WinMax control is equipped with two programming options so you can decide the best programming method for each jobHurco's shop floor programming, called Hurco Conversational, or NC (M and G codes) part programming.
Conversational programming allows you to program a part at the machine by reading the print or program worksheet. As you program the part, prompts and questions appear on the screen. You respond by selecting machine operations or entering part dimensions. The software steps you through.
NC part programs can be created using the CNC software on the control or imported from an offline CAM System. With an enhanced NC interpreter, multi-line NC run time monitor with a G-Code modal display, and canned G-Code probing cycles, the NC side of the Max control is just as powerful as the Conversational programming method for which Hurco is known.
Standard Control Features:
Stop Cycle Button
Constant Surface Speed
Optional Stop
Auto Interrupt Cycle
Spindle Jog
Automatic Tool Home
Coolant Select
Distance to Go (Conversational & NC)
Turret Index Control (Auto/Manual)
Feed Hold Button
Power On Diagnostics
Feed-Rate Override 0-150%
Leadscrew Compensation
Rapid Override 0-100%
Backlash Compensation
RPM Override 0-200%
Program Manager Function
Single Cycle Mode
has tailstock
no chip conveyor or bar feeder
also includes Win Max classic pkg-touch screen, 3D graphics, disc drive
tailstock-manual position W/ programmable quill
6-3/4" insert tooling holders-3 roughing/turning, 2 threding, 1 finishing/profiling holder |
|
| Ad # 7711 | CNC Lathe w/sub Spindle or Live Tooling |
| 1995? |
OKUMA |
LT 25-M |
Very Good |
SOLD |
Photo /
More Info. |
| OKUMA Twin Spindle, Live Tools CNC Lathe: Control: OSP 5020-L
Number of controlled axes: 7
Swing over bed: 25.59"
Swing over saddle: 19.68"
Max. Distance of spindle noses: 57.08"
Max. turning diameter: 11.81
Headstock & Main Spindle
Spindle nose: L,R:JIS A2-8
Spindle diameter at front bearing L,R:4.72"
Bore diameter:
Left: 2.125"
Right: 3.15
Range of spindle speed: L,R:38 to 3,800 rpm
Number of spindle speeds: L,R:2
Cross-Slide (X-axis) & Carriage (Z-axis)
Cross-slides travelX-axes (XA and XB)10.42"
Longitudinal travel: Z-axes
ZA: 22.44"
ZB: 44.88" ZC: 22.44"
Servomotor: X-axes
XA5.3 hp XB5.3 hp
Z-axes ZA, ZB, ZC:5.3 hp
Rapid-traverse speed
X-axes787 ipm
Z-axes945 ipm
Cutting feedrate, X and Z 0.0001 thru 40.0000 IPR
Slide thrust: (Continuous)
X-axes: 1,223 lbs
Z-axes: 2,396 lbs
MACHINE SPECIFICATIONS
Turret (VDI)
Type and No. of tool stationsV12 + V12
Tool size: O.D.1" x 1"
I.D1.50"
Turret size (across flats)15.74"
Size of index coupling9.45"
Turret index time: 0.25 seconds (Station-Station)
Rotary Tool Spindle Speed100-3,000 RPM
Rotary Tool Speed Range1 Infinitely Variable
Electric Motor
Main spindle drive motor: VAC 30 hp (20 min.)
M-Spindle MotorVAC 5 hp
Hydraulic oil pump motor5 hp
Coolant pump motor1/3 hp x 2
Tank Capacity
Hydraulic power unit20 gal.
Coolant tank106 gal
Lubrication tank 1.6 gal. |
|
| Ad # 5854 | CNC Lathe Part & Accessories |
| 1998 |
CNC Enhancements |
Autobar 400 |
Excellent |
sold |
No Photo /
More Info. |
| 0 - 4" Dia. Barfeeder for Haas and Other Types of Lathes: 0-4" Dia capacity. 5'Wide x 40" deep feeder
tray,with angle adj.part capacity.
Remote pendant
Quick connects ready to hook up to a Hass Lathe
HL-2 model purchased with originally.
Made in USA |
|
| Ad # 5815 | CNC Lathe Part & Accessories |
| — |
IEMCA |
ERA/4037-F |
Good |
sold |
No Photo /
More Info. |
| 14' IEMCA ERA/4037-F Barfeeders: TWO UNITS AVAILABLE |
|
| Ad # 7240 | Turning Center 11 in. & over chuck |
| 1996 |
Mori Seiki |
CL-20 B |
Excellent |
Sold |
Photo /
More Info. |
| 18" x 15" Mori CNC Turning Center: Control: Fanuc/Mori MF-T8
Swing Over Bed: 18.5"
Swing Over Slide: 14.96"
Max Turning Diameter: 12.20"
Standard Turning Length: 5.91"
Maximum Turning Length: 12.99"
Bar Capacity: 2.55"
Travels:
X Travel: 7.48"
Z Travel: 14.57"
Rapid Travels:
X Axis: 590 ipm
Z Axis: 787 ipm
Feed/rev:
X Axis: 0 - 19.69"/rev
Z Axis: ) - 19.69"/min
Spindle Speeds: 35 - 3,500 rpm (Infinitely variable)
Spindle Power: 10/7.5 hp
Spindle Through Bore: 2.87" diameter
Spindle - Inner Bearing Diameter: 4.33" diameter
Turret: 8 Station
Square Tool Holder: 1" sq.
Round Tooling: 2" diameter |
|
| Ad # 8195 | Vertical Turret Lathe (VTL) |
| Rebuilt |
BULLARD |
Cutmaster 56 in |
Excellent |
Sold |
Photo /
More Info. |
| 56" Bullard VTL , With ATC, TOTALLY RE-MANUFACTURED: 1980's machine TOTALLY re-manufactured in 2007/2008
Make: Bullard
Model: Dyna-Tape (EAL 1422)
Condition: Totally re-manufactured
Control" Fanuc 21i
General Description
Chuck/Table diameter: 56"
Max Swing: 68"
Table Drive: 75 hp (also NEW!)
Spindle Speeds: 8.2 rpm to 300 rpm
ATC: 16 station
Control: Fanuc 21i |
|
| Ad # 1701 | Vertical Spindle Lathe |
| 1980? |
Bullard |
Dyna-Tape (EAL 1422) |
Needs Work |
SOLD |
Photo /
More Info. |
| Large Bullard (56" Chuck) CNC VTL with Tool Changer: Chuck/Table diameter: 56"
Max Swing: 68"
Table Drive: 100 hp
Spindle Speeds: 8.2 rpm to 300 rpm
16 Station ATC
Control is a Dynapath System 5 |
|
We found 15 matching ads. Now displaying the remaining 15 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8068 | Tool Room Lathe 8in. to 14in. swing |
| 2003 |
BIRMINGHAM |
YCL-1340GH |
Excellent |
Sold |
Photo /
More Info. |
| 13" x 40" Gear Head Bench Lathe with Stand, Single Phase: Swing Over Bed: 13"
Swing Over Cross Slide: 8"
Swing Over Gap Bed: 18-3/4"
Width Of Gap: 7-7/8"
Distance Between centers: 40"
Hole Through Spindle: 1-3/8"
Spindle Taper: D1-4
Spindle Speeds: 70 - 2,000 ppm
2 HP motor
8 speeds 70-2000
5C collet closer setup included
QC toolpost W/ 5 holders |
|
| Ad # 1544 | Heavy Duty Large Lathe 24in. & over swing |
| NEW |
Lansing |
Lansing G 43" x 120" |
New |
SOLD |
Photo /
More Info. |
| 20 3/4" Bore LANSING G Semi-Automatic Oil Country Lathe: Swing Over Bed: 43"
DBC: 120"
Swing In Gap 58
Swing Over Cross Slide 33
Length of Gap 20
Width of Bed 29 ฝ
Spindle Bore 20 พ
Spindle Nose A1-28
Number of Speed Steps 3
Range of Spindle Speeds 0 177rpm
Tool Retractor Slide Travel 1 ผ
Compound Slide Travel 14 ฝ
Cross Slide (width x travel) 13 ฝ x 25
STEADY REST 3 Roller Jaws Capacity 5 23
FEEDS
Number of Longitudinal & Cross Feeds 40
Range of Longitudinal Feeds .004 - .064
Range of Cross & Compound Feeds .003 - .053
Rapid Longitudinal 60/min.
Rapid Cross Slide 30/min.
Rapid Compound Slide 30/min.
THREADS
40 Metric Threads .5 7.5
160 Inch Threads (TPI) Standard 60-4 120 1
40 Module Threads .25 3.75
40 Diametral Threads 120 8
TAILSTOCK
Quill Diameter 6
Morse Taper M.T. #6
Quill Travel 14
TAPER ATTACHMENT
Length of Travel 25 ฝ
Amount of Taper Offset ฑ3 ฝ / Ft.
MOTORS
Spindle 60 HP / DC
|
|
| Ad # 4307 | Centering Machines |
| ? |
Jones & Lamson |
— |
Good |
Sold |
Photo /
More Info. |
| Automatic Facing & Centering Machine: 4" diameter Bar Capacity
4' Between Centers
2 x 6" diameter facing cutters (insert type) |
|
| Ad # 1518 | Tool Room Lathe 8in. to 14in. swing |
| unknown |
Hendley |
— |
Fair |
Sold |
Photo /
More Info. |
| Hendley 10" Lathe: Swing: 10"
Distance Between Centers: 30" |
|
| Ad # 4013 | Ram Type & Saddle Type Turret Lathes |
| 1941 |
Morey |
Model 2-G |
Fair |
SOLD |
Photo /
More Info. |
| Second Operation Turret Lathe: Swing: 15"
Bed Length: 30"
6-Station Ram-Type Turret
Spindle: 1" Through Bore |
|
| Ad # 5414 | General Purpose Lathe 15in. to 23in. swing |
| — |
Lodge & Shipley |
Blue Chip 21 |
Good |
Sold |
Photo /
More Info. |
| 21" x 120" Gap Bed Lathe: Distance Between Centers: 120"
Swing Over Bed: 21-1/2"
Swing Over Cross Slide: 14-3/4"
Swing Over Gap: 36"
Distance from Spindle Nose to Start of Gap: 5-1/2"
Distance from Spindle Nose to End of Gap: 12-1/4"
Gap Casting Included
Bed Width: 15-3/4"
3-Jaw 15" Chuck
Spindle Nose: 11", D1
Spindle Bore: 3-1/2" diam.
Spindle Power: 12.5 hp
Spindle Speeds: 20 - 1,000 rpm
Spindle Speed Steps:
12 steps via a "Quick Change" Gear Box
Tail Stock with MT 5 Live Center
Steady Rest with Rollers: 12"
Steady Rest: 8"
Inch/Metric Threading
4-Way Tool Block |
|
| Ad # 1336 | General Purpose Lathe 15in. to 23in. swing |
| ? |
LG |
2080 OS |
Good |
Sold |
Photo /
More Info. |
| Long Bed Manual Lathe: Swing Over Cross Slides 20" x 80" centers
Spindle 3" dia Bore
Gap Bed
Inch/Metric Threads
Steady Rest (3")
Tool Post
#-Jaw Chuck - 12"
|
|
| Ad # 1311 | Ram Type & Saddle Type Turret Lathes |
| ? |
Hitachi Seiki |
5AII |
Fair |
Sold |
Photo /
More Info. |
| Hitachi Seiki Turret Lathe (Made in Japan): Max Swing 20"
Swing Over Slide 14"
Z 24"
Spindle Bore 3"
6 Station tuttet (plumbed for coolant)
|
|
| Ad # 7668 | Tool Room Lathe 8in. to 14in. swing |
| — |
Nardini |
MS 1440E |
Good |
Sold |
Photo /
More Info. |
| 14" x 40" Nardini Mascote MS-1440E High Precision Lathe : Swing: 14 "
Centers: 40 "
Spindle Bore: 1.875 "
Power: 6.75 HP
Swing Over Cross Slide: 8 "
Description: 14in. Swing over bed
21in. Swing thru gap
8in. Swing over cross slide
40in. Between centers
18 Spindle speeds 31.5 - 2500 RPM
Inch and MM Threading
1-7/8in. Spindle bore
D-5 Spindle taper
#3 Morse taper tailstock
|
|
| Ad # 7642 | Manual Lathe Parts & Accessories |
| — |
Variuos |
3/8, 1/2, 1" Square Tools |
Excellent |
SOLD |
Photo /
More Info. |
| Large Quantity of Lathe Tooling Ranging from 3/8" - 1" Square: Around 500 pieces of HSS and carbide tipped square shanked cutting tools of... |
|
| Ad # 7519 | Second Operation |
| 1994 |
COSEN |
LHT-25B |
Very Good |
Sold |
Photo /
More Info. |
| High Speed Second Operation Turret Lathe (Hardinge Copy): Turret: 6 position
Turret Tool Holders: 19 mm (3/4")
Spindle Bore: 30 mm (1-1/16")
Spindle Power: 2 hp
Spindle Speed: 460-780-1,290-1,850 rpm
Chuck: 5-C Collet Chuck with collet closer
Bed Width: 120 mm (4-3/4")
Bed Length: 725 mm (32-3/8")
Height from Center of Lateral Cutter: 130 mm (5-1/8")
Travel of Lateral Cutter: 130 mm (5-1/8")
Scroll Chuck Capacity: (NOT included) 125 mm (5")
Collet Chuck Capacity:
Round Bar: 5 - 25 mm (3/16" - 1")
Hexagon Bar: 7 - 22 mm (1/4" - 13/16")
Square Bar: 7 - 18 mm (1/4" - 13/16")
Threading Capacity:
For Brass: 20 mm (3/4")
For Steel: 12 mm (1/2") |
|
| Ad # 7296 | Vertical Turret Lathe (VTL) |
| Nov 69? |
SIGMA |
DKZ 25000\ |
Very Good |
SOLD |
Photo /
More Info. |
| 88" Table, 100" Swing Sigma VTL: Table: 88" diameter
Swing: 100"
4-Jaw chuck arrangement
Table Drive: 36 kW (approx. 46 hp)
Table RPM: 1 - 50 rpm in 18 steps
Head Tilt
87" Under the Rail
Ram Travel: 64"
Drilling Depth from Cross Rail Arm: 63" (1,600 mm)
Feed Ranges:
0.0012" - 0.002" - 0.003"
0.005" - 0.008" - 0.012"
0.02" - 0.03" - 0.05"
0.6" - 0.12" - 0.2"
|
|
| Ad # 1755 | Ram Type & Saddle Type Turret Lathes |
| — |
Gisholt |
# 3 |
Good |
SOLD |
Photo /
More Info. |
| Gisholt # 3 Turret Lathe: Swing: 20"
DBC: 26"
Spindle Bore: 3 1/4"
6 Station Turret
10" 3-Jaw Chuck
|
|
| Ad # 5673 | General Purpose Lathe 15in. to 23in. swing |
| 1993 |
Eisen ? |
22 x 120 |
Good |
Sold |
Photo /
More Info. |
| 22" x 120" HEAVY DUTY GAP BED ENGINE LATHE: Swing Over Bed: 22"
Swing Over Gap: 30"
Length of Gap: 14"
Distance Between Centers: 120"
Spindle Bore: 2-1/2"
Spindle Speeds Range: 14 - 2,400 rpm (Gear Driven)
Inch/Metric Threading
Tail Stock
Coolant System
Work Lamp
Chuck Chip Guard |
|
| Ad # 7091 | Tool Room Lathe 8in. to 14in. swing |
| ? |
Christian |
11" x 24" |
Good |
sold |
Photo /
More Info. |
| 11" x 24" Swiss Built Tool Room Lathe: Swiss Made - metric only!
Swing: 11"
DBC: 24"
Spindle Bore: 1.00"
Chuck: 6"
Tailstock
NOTE: Machine is 380v/3-phase but has a 220v/3-phase transformer attached. |
|
We found 13 matching ads. Now displaying the remaining 13 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 15396 | Vertical Machining Centers (VMC) |
| 1995 |
Cincinnati Milacron |
Lancer 1000 |
Needs Work |
sold |
Photo /
More Info. |
| 40" x 20" x 22": 1995 Cincinnati Milacron LANCER 1000
Vertical Machining Center
Control: Acramatic A2100
X Axis Travel: 40″
Y Axis Travel: 20″
Z Axis Travel: 22″
Table Size: 44″ x 20″
Table Load: 2,200 LBS
Spindle Taper: 40
Spindle Speed: 10,000 RPM
Tool Changer Capacity: 30 ATC
Machine Dimensions: 140″L x 95″W x 105″H
Machine Weight: 11,000 LBS
Machine is running but needs attention:
1. the spindle chiller is not working.
2. Also the max. speed it can run at is
6,000
rpm as it needs
new spindle bearings
|
|
| Ad # 9090 | Vertical Machining Centers (VMC) |
| 1996 |
FADAL |
VMC 15 |
Very Good |
Sold |
Photo /
More Info. |
| 20 x 16 x 20; Fadal VMC 15: Control: FADAL 88 HS
RS 232C Port
Travels:
X: 20"
Y: 16"
Z: 20"
Table Size: 30" x 20"
Spindle: CAT 40
Spindle Power 15 hp
Spindle Speed: 7,500 rpm
Options:
Rigid Tapping
Wired for a 4th Axis (4th axis NOT included)
|
|
| Ad # 4171 | Horizontal Machining Centers (HMC) |
| 2002 |
Compu-Mill |
HMC-410 |
Excellent |
Sold |
No Photo /
More Info. |
| COMPUMILL 410mm PALLET HMC: TWO MACHINES AVAILABLE:
PALLET SIZE: 16.14 X 16.14(410 MM)
MOUNTING HOLES M16, 50 MM SPACING
MAXIMUM TABLE LOAD 700 LBS.
X-AXIS TRAVEL 24.01 (610 MM)
Y-AXIS TRAVEL 20.08 (510 MM)
Z -AXIS TRAVEL 19.70 (500 MM)
INDEX TABLE (PALLET) 360,000 POSITIONS (FULL 4TH)
DISTANCE FROM TABLE TOP TO SPINDLE NOSE 2 TO 17.72
DISTANCE FROM TABLE CENTER TO COLUMN SLIDEWAY: 16.14
SPINDLE TAPER CT 40
SPINDLE SPEED 80 - 12,000 RPM
DRIVE METHOD DIRECT
RAPID FEED X,Y 1180 IPM
RAPID FEED Z 1180 IPM
CUTTING FEED X,Y,Z 472 IPM
ATC 60 TOOLS
TOOL EXCHANGE TIME 1.8 SECONDS
TOOL SELECTION METHOD RANDOM BI-DIRECTIONAL, TOOL HOLDER STYLE CT 40
MAX. TOOL DIAMETER 3.3"/4.9" ADJACENT POCKET EMPTY
ACCURACIES:POSITIONING 0.0002"
FULL STROKE
REPEATABILITY 0.0001"
INDEXING +/- 3.0 ARC SECONDS
REPEATABILITY +/- 1.0 ARC SECONDS
SPINDLE MOTOR 12/15 HP AC/30
MIN.POWER REQUIREMENT 25 KVA, 220VAC,3P/60 HZ
AIR REQUIREMENT 71-100 PSI,
CONTROL FANUC 18I-M
|
|
| Ad # 3722 | Horizontal Machining Centers (HMC) |
| — |
Ex-Cello |
105 WorkCenter |
Good |
sold |
Photo /
More Info. |
| 400 mm pallets HMC-5 axis capable: Travels:
X 24"
Y 20"
Z 16"
Table Indexing: 1 deg pogramable
Spindle Drive:
Spindle Speeds:
Spindle Nose: # 45 NMTBA TAPER (CAT 45)
Tool Changer: 24 Stations |
|
| Ad # 3698 | Vertical Machining Centers (VMC) |
| — |
MillPort |
VMC-1000 |
Fair |
Sold |
Photo /
More Info. |
| LARGE MILLPORT VMC: — |
|
| Ad # 3563 | Vertical Machining Centers (VMC) |
| 2004 |
Milltronics |
RW-30 |
Excellent |
Sold |
Photo /
More Info. |
| Full 5-Axis 60" x 30" VMC - Incl. 5-Axis Tables: X,Y,Z = 60 x 30 x 26
Table = 63 x 23.5
Table Capacity = 6,000 lbs
Spindle Range = 25 - 4,500 rpm
Spindle HP = 30/25 hp
Spindle Bearing Diameter: = 100 mm
Standard Features:
ทFully Hardened and Ground Box Ways with Turcite Surfaces and Precision Ground Ball Screws
ทPC-based CPU includes 6 Mb DiskOnChipฎ Parts Storage Memory Non-volatile motionless disk
ท12" LCD Active Matrix Color Display with Discrete Keys
ท8 Mb Virtual Disk / RS-232 with DNC Buffer and Large Program Management Software
ท1300 Block/Sec High Speed Processor
ทConversational plus G & M Code Programming with 3-D Part & Tool Path Graphics
ทEngraving, Helical Interpolation, Auto Routines, and User-definable Macros with Trig Assist
ทCoordinate Rotating, Scaling, Mirror Image, Thread Mill and Non-Descript Pocket Clear Cycle
ทFive Axes Simultaneous Interpolation Software and Interface Servos separate
ทAuxiliary Keyboard Port for PC Keyboard
ทAutomatic Axes Thrust Bearing Lubrication
ทAutomatic Metered Lubrication w/Low Lube Fault
ทSpare M Function and CNC Wait Channel
ทOperator's Station Electronic Handwheel plus Handwheel Controlled Program Execution
ท1.44 Mb Floppy Drive
ทHigh Torque AC Digital Servo Drives
ทSpindle Taper Air Blow Out
ทTwo Speed High Torque Closed Loop Spindle Drive RW30 has 30/25 HP (22/18 kW)
ทSpindle Load Meter
ทWork Lamps
ทFull Metal Enclosure
ทAutomatic Home Sequence with Home Switches
ทSpindle Chiller standard on RW30
ท#50 4500 RPM Spindle Cartridge on RW30
ทMetal Way Covers in Front and Rear of Saddle and Column
ทOutrigger Linear Ways on RW30
ทARM Type ATC: 32 Stations
ทHigh Pressure Flood Coolant System with Dual Nozzles
ทTool Release ButtonทLCD Hour Meter
ทAir Blast Hose
ทChip Drawer Chip Removal System
ทWash Down Hose
ทMost Software Upgrades Included in Base Price
ทAll Axes Laser Were Calibrated and Ballbar Inspected when new
|
|
| Ad # 7609 | Universal Machining Centers |
| 2000 |
DMG |
DMU 70 V |
Very Good |
Sold |
Photo /
More Info. |
| 5-Axis DMG Model DMU 70 V Universal Milling Machine: Travels:
X 27.95
Y 20.5
Z 20.5,
Spindle Speed: 12,000 RPM,
Spindle Size: Cat 40
ATC: 60 Tools,
580 psi through the spindle coolant,
238 gal coolant tank,
Rotoclear Window,
Chip Conveyor
Hand Wheel Pendant |
|
| Ad # 9268 | Vertical Machining Centers (VMC) |
| 7/96 |
HAAS |
VF-6 |
Very Good |
sold |
Photo /
More Info. |
| HAAS VF-6 High Torque, 64" x 32" x 30" VMC: Travels:
X: 64"
Y: 32"
Z: 30"
Spindle Nose To Table: min/max: 4"/34"
Table: 64" x 28"
Max Table Weight: 4,000 lb
Spindle Power:15 hp HIGH TORQUE
Spindle Size: CAT 40
Max Speed: 7,500 rpm
ATC:24 |
|
| Ad # 5801 | Horizontal Machining Centers (HMC) |
| 2000 |
Okuma |
MA-60HB |
Excellent |
Sold |
Photo /
More Info. |
| 630 mm PALLET, 39.37 x 31.5 x 31.8 OKUMA HORIZONTAL MACHINING CENTER: Max. Machining Capacity: 39.37 x 31.5 x 31.89 ... |
|
| Ad # 5726 | Horizontal Machining Centers (HMC) |
| 1997 |
Mitsui Seiki |
HT4A |
Very Good |
Sold |
Photo /
More Info. |
| Mitsui Seiki HT4A 4-Axis CNC Horizontal Machining Center: Table Size: 19.8" x 19.8" (500 mm)
Number of Pallets: 2
Table Travels:
X -Axis: 28.3"
Y-Axis: 23.62"
Z-Axis: 21.65"
Table Load Capacity: 3,300 lbs
Table Indexing: .001 N/C Contouring
Rapid Rates:945 IPM X, Y, Z
Spindle Nose: CAT 50
Spindle Speed: 50 12,000 RPM
Tool Magazine: 120 ATC
Tool Change Time: 3 Secs
Pallet Change Time: 8 Secs
Main Motor: 30 hp
Equipped with:
Fanuc 15MB CNC Color Control
12 MB Ram
80 MB Hard Drive
1.4 MB Floppy Drive
Coolant thru The Spindle
Scale Feedback
Spindle RPM Meter
Spindle Chiller
Full Enclosures
Chip Conveyor
All manuals, Parameter Sheets, and Schematics |
|
| Ad # 1780 | Vertical Machining Centers (VMC) |
| 1996 |
Monarch |
VMC75-B |
Good |
Sold |
Photo /
More Info. |
| Monarch VMC With 2-Station Pallet Changer: Control: Allan-Bradley Series 9
Table/Pallet Size: 20" x 50"
Travels:
X 43"
Y 20"
Z 25"
Spindle: 25/35 (cont/30 min)
CAT 50
Spindle Speed: 6,000 rpm max
ATC: 26 Stations
Prep for Through Spindle Coolant (Plumbed only)
Fitted for flume coolant operation (central coolant/chip system),no coolant pans or pump was in central sump system
Documents |
|
| Ad # 8189 | CNC Parts and Accessories |
| used+new |
Various |
HSK-63 |
Excellent |
sold |
No Photo /
More Info. |
| HSK Tool Holders, All types, NEW and USED: A HUGE selection of HSK-63 tool holders is
available.
All types ranging from standard mill holders of
various sizes, collet holders, shell mill holders,
standard and special boring bars.
Will be sold individually or any quantity. |
|
| Ad # 5589 | CNC & Retrofit Knee / Bed Mills w/o ATC |
| — |
WELLS INDEX |
810 CNC |
Fair |
sold |
Photo /
More Info. |
| 9" x 47" 3-AXIS CNC KNEE MILL: Table: 9" x 47"
Spindle Power: 3 hp
Control: Wells Index/Summit CNC 700
Inch/Metric Switchable
Quick Change 30 Spindle Taper
Spindle Speed: 50 - 4,200 rpm in 2 stages
Spindle Brake (safety)
Oil Mister
Work Light
All Manuals |
|
We found 4 matching ads. Now displaying the remaining 4 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 1454 | Engraving, Copying & Pantograph Equip. |
| 1983 |
Ching Yia Tools |
55N |
Good |
sold |
Photo /
More Info. |
| Engraving/Pantograph Machine: Milling Table: 20" x 12"
Tracer Table: 16.5" x 24" |
|
| Ad # 5385 | Manual Mill, Parts and Accessories |
| 2004 |
SANDVIK |
VARIOUS |
New |
Sold |
No Photo /
More Info. |
| VARIOUS BT-40 TOOL HOLDERS - NEW!: 24 Brand New "BT-40" tool holders of various types with all original access... |
|
| Ad # 8565 | Knee Mills (Bridgeport Type) |
| 1987 |
WEBB |
3 VH |
Very Good |
sold |
Photo /
More Info. |
| 10 x 50 With DRO and Power Feed in X: Table: 10" x 50"
Variable Speed
Spindle Speeds: 60 - 500,500 - 4,200 rpm
Spindle Power: 3 hp
One Shot Lube |
|
| Ad # 7092 | Knee Mills (Bridgeport Type) |
| — |
Baldwin Manufacturing |
Beaver 10" x 56" |
Good |
SOLD |
Photo /
More Info. |
| 10" x 56" Universal Mill with 12" Riser Block and Power Knee: Table: 10 x 56"
Riser Block(s): 12" (Total)
Boxed Ways in Z (vertical)
Spindle: CAT 30
Spindle Power: 3 hp
Power Feed in Knee (Z) |
|
We found 7 matching ads. Now displaying the remaining 7 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 1463 | Multi Spindle Drill Press |
| — |
NATCO |
H-6 |
Fair |
Sold |
Photo /
More Info. |
| NATCO 24 Station Multi-Spindle Drill: 24 Drill Positions
Table: approx 30" x 24" |
|
| Ad # 1462 | Multi Spindle Drill Press |
| 1958 |
NATCO |
H6 |
Fair |
Sold |
Photo /
More Info. |
| NATCO 16 Station Multi-Spindle Drill: 16 drill drive positions
Table approx 30" x 24" |
|
| Ad # 1461 | Multi Spindle Drill Press |
| — |
South Bend |
HRG |
Fair |
sold |
Photo /
More Info. |
| South Bend Multi-Spindle Drill: 24 Drill Drives
Table 24" x 15"
24" Work height
|
|
| Ad # 1460 | Multi Spindle Drill Press |
| 1969 |
Cleereman |
ADT |
Fair |
sold |
Photo /
More Info. |
| Dual Head, Multi-Spindle Drill: Table: 40" x 24"
10 drill Drives per side |
|
| Ad # 7641 | Drill / Thread Parts & Accessories |
| — |
National , Union Twist |
National & Union Twist, etc |
Very Good |
SOLD |
Photo /
More Info. |
| Large Twist Drills & Reamers Ranging From 7/8" tp 2-14" Diam. or More: Most are USA made such as Union Twist, NationalTwist etc etc.
Between 75 - 100 drills and reamers of all sizes ranging from about 7/8" to 2-1/4" diameter or more! |
|
| Ad # 4661 | Drill / Thread Parts & Accessories |
| — |
Osborne |
— |
New |
sold |
Photo /
More Info. |
| 3-1/4" MT-6 HSS TWIST DRILL: Diameter: 3-1/4"
Overall Length: 26-1/2"
Flute Length: 16" |
|
| Ad # 8098 | Radial Drill Press |
| — |
FOSDICK |
4ft x 12in Sensitive |
Very Good |
Sold |
Photo /
More Info. |
| 4' X 12" FOSDICK "SENSITIVE" RADIAL DRILL: LENGTH x COLUMN DIAMETER ..... 4' X 12"
AREA OF BASE (T-SLOTTED) ......... 53" X 30"
AREA OF TILT TABLE (T-SLOTTED) ... 42" X 24" SPINDLE SPEEDS ............. (9) 62 TO 2500 RPM
SPINDLE FEEDS .................... (4) .002/.004/.007/.010 IPR
SPINDLE STROKE ................... 10" SPINDLE DIAMETER ................. 2-1/4"
SPINDLE TAPER .................... #4 MT
SPINDLE TO COLUMN ................ 48ดด MAX. / 9" MIN.SPINDLE TO TILT TABLE ............ 23-1/2" MAX.SPINDLE TO BASE .................. 45" MAX. / 35" MIN.BASE HEIGHT ...................... 6-1/4"
TABLE TILT ....................... 360 DEGREES
POWER TABLE ELEVATION ............ YES
TAPPING .......................... YES
SPINDLE MOTOR .................... 2-1/2 HP
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 1459 | Fully Automatic Horizontal Band Saw |
| 1995 |
Missler |
DEB280-CENC |
Good |
SOLD |
Photo /
More Info. |
| Missler -Automatic Horizontal Band Saw: German made with Numerical Control.
Blade: 1.25"
Capacity: 11" x 11"
Round Cap: 12"
|
|
| Ad # 8182 | Cold Saws & Power Hack Saws |
| 1973 |
Kaltenbach |
HDM 800 |
Good |
Sold |
Photo /
More Info. |
| 31.5" Diameter, Kaltenbach HDM 800 Cold Saw: 31.5" diameter blade, cuts up to 24" WF sectionsMitre cut units for angles ... |
|
We found 22 matching ads. Now displaying the remaining 22 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5476 | Vertical Spindle - Blanchard Type |
| — |
Blanchard |
# 18-36 |
Good |
sold |
Photo /
More Info. |
| 36" Blanchard Model # 18-36: Table Dia. 36"
Table: Power: 25 HP,
Table Speed: (6)6-33 RPM
Wheel Speed: 720 RPM,
Wheel Dresser,
Load Meter
Power or Hand Elevation, Coolant Tank, Wet Base
Splash Guards
12" Under Wheel
Max. Work Load on Chuck 3,000 lbs |
|
| Ad # 1453 | Grinding Parts & Accessories |
| 1990 |
Nachi |
NBS-63D |
Excellent |
sold |
Photo /
More Info. |
| Nachi Broach Grinder (Made in Japan): Designed for diamond wheels (one included)
Magnetic Chuck: 36" x 5"
Variable speed grinding head
Swivel Grinding Head
Swivel "Y" Axis
no attachments included |
|
| Ad # 5416 | Cylindrical Grinders (O.D. & I.D.) |
| — |
Norton |
10" x 72" |
Fair |
Sold |
Photo /
More Info. |
| 10" x 72" Norton OD GRinder with 14" Dia Wheel: Swing: 10"
Distance Between centers: 72"
Max. Grind Length: 72"
Wheel Diameter: 24"
Coolant and Filtration System
Three Steady Rests
1 x Diamond Dresser |
|
| Ad # 1353 | Surface Grinders |
| — |
Brown & Sharp |
1024 MicroMaster |
Good |
Sold |
Photo /
More Info. |
| Brown & Sharp 1024 Surface Grinder: 10" Wheel
Includes a 10" x 24" Permanent Magnet Chuck
Htd. cross Feed
Coolant System |
|
| Ad # 1294 | Cylindrical Grinders (O.D. & I.D.) |
| — |
Norton |
6 x 18 |
Fair |
sold |
Photo /
More Info. |
| Norton OD Grinder (6" dia. x 18" BDC): Max grinding dia 6"
Max grinding length 18"
Wheel 20" dia, 2" wide
Spindle Motor 7.5 HP |
|
| Ad # 1293 | Centerless Grinders |
| — |
Landis |
8" |
Very Good |
Sold |
Photo /
More Info. |
| Landis 8" Centerless Grinder: 8" Wide Wheels-new wheels on machine
Spark Out Timer
Spare regulator wheel
Up to 4" Dia part
had an infeed attachment ?
has thru feed
would hold good tolerence |
|
| Ad # 5275 | Surface Grinders |
| 1952 |
Thompson |
12 x 30 |
Good |
SOLD |
Photo /
More Info. |
| Heavy Duty 12" x 30" Table Thompson Surface Grinder: Table: 12" x 30
11" dia Grinding Wheel
Intergrated Coolant System
Includes the 25.5" x 12.5" Perm. Mag Chuck |
|
| Ad # 7877 | Surface Grinders |
| — |
DoAll |
D-6 |
Good |
SOLD |
Photo /
More Info. |
| 6' x 18" DoAll Hydraulic Surface Grinder with Magnetic Chuck: Mag Chuck: 6" x 18" (Walker)
Mag Chuck: Manually operated
Coolant System |
|
| Ad # 6599 | Tool & Cutter Grinders |
| — |
Union Twist Drill |
— |
Fair |
SOLD |
Photo /
More Info. |
| Drill Sharpener for Large Diameter Drills : Swivel Head
Variable Speed Wheelhead Drive
Vertical Slide for height setting
Swivel/rotate Tailstock/tool support
Simplified Tool Holding device
Manual Infeed (via lever)
Coolant system |
|
| Ad # 6593 | Surface Grinders |
| — |
Simonds |
84HF752V3--- |
Very Good |
Sold |
Photo /
More Info. |
| 84" Straight Knife Grinder: Max: Grinding Length: 84"
Spindle Power: 10 hp
Coolant System with pumps etc
Auto Reciprocating Feed
Auto Cut Feed (Into workpiece)
Angle manually set and adjusted |
|
| Ad # 5185 | Cylindrical Grinders (O.D. & I.D.) |
| 1977 |
Studer |
RHU-400/125-C |
Very Good |
sold |
Photo /
More Info. |
| Studer 5" x 16" Hydraulic Universal OD Grinder: OD grinder
Max Swing: 5" (125mm)
Distance Between Centers: 16" (400mm)
Travel in X: 17.5" (440 mm)
Grinding Wheel (left side) Specifications:
Diameter 16"
Max Width: 2"
Bore: 127 mm
Power: 4 hp
Workhead Swivel: 90 deg
Work Table Swivel: 15 deg(?)
Wheelhead Swivel: 45 deg
Workhead Spindle Nose: MT 5
Workhead Speed Range: 30 - 675 rpm
Table Speeds: 0.05 - 5.5 meters/min (2-220 ipm)
Dresser Holder mounted onto Tailstock(footstock)
Taper Micro Correction on Tailstock(footstock)
Full Coolant and Filtration System
in operation when taken out of service-will hold
0.000050 millionths tolerance |
|
| Ad # 5185 | Cylindrical Grinders (O.D. & I.D.) |
| 1977 |
Studer |
RHU-400/125-C |
Very Good |
sold |
Photo /
More Info. |
| Studer 5" x 16" Hydraulic Universal OD Grinder: OD grinder
Max Swing: 5" (125mm)
Distance Between Centers: 16" (400mm)
Travel in X: 17.5" (440 mm)
Grinding Wheel (left side) Specifications:
Diameter 16"
Max Width: 2"
Bore: 127 mm
Power: 4 hp
Workhead Swivel: 90 deg
Work Table Swivel: 15 deg(?)
Wheelhead Swivel: 45 deg
Workhead Spindle Nose: MT 5
Workhead Speed Range: 30 - 675 rpm
Table Speeds: 0.05 - 5.5 meters/min (2-220 ipm)
Dresser Holder mounted onto Tailstock(footstock)
Taper Micro Correction on Tailstock(footstock)
Full Coolant and Filtration System
in operation when taken out of service-will hold
0.000050 millionths tolerance |
|
| Ad # 6448 | Tool & Cutter Grinders |
| — |
Winslow |
HC-101 |
Very Good |
sold |
Photo /
More Info. |
| Winslow Exatomic HC-101 Drill Pinter Grinder with Splitter: 1/2" Capacity
Splitter Attachment
12" dia. Wheel
Wheel Hubs
All Standard and Metric Bushings:
1/16" to 1/2" (1.6mm to 13mm) |
|
| Ad # 4913 | Cylindrical Grinders (O.D. & I.D.) |
| — |
Cincinnati |
5U4D5SN-1 |
Good |
SOLD |
Photo /
More Info. |
| Universal (ID/OD) Cylindrical Grinder: Just Arrived!!! More information to follow |
|
| Ad # 4910 | Cylindrical Grinders (O.D. & I.D.) |
| — |
BLM |
RC 280 |
Excellent |
Sold |
Photo /
More Info. |
| LARGE BLM MADEL RC 280 CRANK SHAFT GRINDER: All Metric machine
10-12" Swing
Distance Between Chuck Faces: 47"
Distance Between Spindle Faces: 50"
Grinding Wheel: 30" diameter
Coolant System
Also Includes:
Workpiece Counter Balance Sets
Grinding Wheel Balancer
Set of Set-Up Precision Gauges
Dual Workheads, each with a 8" chuck |
|
| Ad # 960 | Vertical Spindle - Blanchard Type |
| — |
Kugel-Muller |
KNIFE SWISHER |
Good |
Sold |
Photo /
More Info. |
| VERTICAL SPINDLE DIE BLOCK GRINDER: 7" DIA WHEEL; USED TO GRIND DIE BLOCKS |
|
| Ad # 4791 | Vertical Spindle - Blanchard Type |
| 1959 |
Blanchard |
Blanchard # 11 |
Good |
sold |
Photo /
More Info. |
| Blanchard # 11 Grinder with 16" Chuck: 16" 2-Pole Chuck (110V/1) 3RC10 Type 1R41D
Machining Cube: 20" x 7" high
Z; 11"
Wheel Speed: 1,200 rpm
Chuck Power: 15 hp
Feed In: 0.001"/min
Vertical Powered Feed: 0.003" to 0.70"/min
Wheel Size: 11" x 5" x 1" thick
Coolant System
Chuck Speed: 15, 24, 41 and 64 rpm (Gear driven)
|
|
| Ad # 5856 | Surface Grinders |
| — |
Gallmeyer & Livingston |
# 36 |
Fair |
sold |
Photo /
More Info. |
| 10" x 32 Surface Grinder: Table Surface: 10" x 32"
Table Overal: 52" x 14"
Grinding Wheel Diameter: 12" max |
|
| Ad # 5857 | Surface Grinders |
| — |
Covel |
# 5 |
Fair |
SOLD |
Photo /
More Info. |
| 26" x 8" Hydraulic Surface Grinder: Table: 9-1/2" x 46"
Distance from Spindle to Table: 5"/17"
Vertical Travel: 11" (with 12" wheel)
Wheel Diameter: 12" max
Mag. Table: 8" x 24" |
|
| Ad # 1795 | Cylindrical Grinders (O.D. & I.D.) |
| 1999 |
Junker |
BUAJ-30CNC |
Excellent |
SOLD |
Photo /
More Info. |
| 36" x 12" CNC Junker O.D. Grinder: Control; Fanuc O-GC
DBC: 36"
universal type
Max Swing 12"
Auto Dresser
Hydraulic Tailstock
Coolant Separator (Paper filter)
Mist collector
Wheel: 14" dia x 1 1/2"
Part locator |
|
| Ad # 4461 | Cylindrical Grinders (O.D. & I.D.) |
| 2000 |
Supertec |
G 20 P-50 CN |
Demo Machine |
Sold |
Photo /
More Info. |
| Supertec 8 x 20 CNC Cylindrical Grinding Machine: Fanuc CNC Controller
Meehanite Castings
Infinite Variable Speed Workhead
Coolant and Filtering System
Swing 8
Center Distance 20
Max Grinding Dia 8
Load Between Centers 176 lbs
Grinding Wheel 14 x 1-2 x 5
Wheel Speed 1940 rpm
Minimum Infeed 0.0001
Centers Taper MT 3
Work Head Speeds 50 5,000 rpm
Wheel Head Motor 5 Hp
For an additional a $7,500.00 we can retrofit a NEW ID Grinding spindle.
Other specifications available on request |
|
| Ad # 5618 | Cylindrical Grinders (O.D. & I.D.) |
| 94?? |
Bickford/G&L |
FR-200 |
Very Good |
sold |
Photo /
More Info. |
| Universal OD/ID Grinder with CAM Grinding Capabilities: Table: 13" x 59"
swing 8" max
Tailstock attachment
Swivel Wheelhead with 8" vertical Movement
Wheelhead has 3 Spindles Mounted on it:
2 OD Wheels-thru type --one on each end
1 ID Spindle
Includes cams for tap grinding:
ID Grinding attach included
a few 5C tap collets
ID spindle is a Precise Grinding spindle , 3" diam. with Precise variable speed drive.
Workhead: Swivels
Workhead Drive: 1/2 hp @ 115V |
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 4243 | EDM Parts and Accessories |
| — |
SYSTEM 3-R |
MAXI |
New |
sold |
No Photo /
More Info. |
| SYSTEM 3-R SINKER EDM TOOLING: BOTH ITEMS OFFERED AS A PACKAGE;
One each of:
System 3-R Dovetail Adaptor Plate Part # 3-R 27.2
System 3-R Dovetail Part Number 3-R 29
The pair cost $ 2,600.00 New today |
|
| Ad # 8554 | Wire EDM Machines |
| Oct 84 |
JAPAX |
Series S |
Very Good |
sold |
Photo /
More Info. |
| 14 x 8 x 6 JAPAX Wire EDM with Tilt Axes: Workpiece Size - Max: 20" x 16" x 6"
Workpiece Weight - Max: 330 lbs
Travels:
X: 14"
Y: 8"
Z: 6"
Electrode Diameter Range: 0.002" to 0.010" diam
Japax Type VH 20, 20 Amp Power Supply
Japax Type JAPT-3F CNC Control
Japax Type PW 14H Dieletric/Filter System
Automatic Lubrication
|
|
| Ad # 5612 | RAM / Conventional EDM Machines |
| — |
Hansvedt/South Bend |
150-B |
Very Good |
SOLD |
Photo /
More Info. |
| Single Phase (110-V) 8" x 6" x 6" Table Top EDM: Travels:
X: 8"
Y: 6"
Z: 6"
Work Tank Size: 13" x 20" x 13 h
Work Table: 9" x 15"
Platen Size: 5" x 13-1/2"
Throat: 16" max. - 10" min.
Ram Pulser Unit (Timer)
Coolant Reservoir: 30 gallon (on Castors)
Filter: 5 micron Filter Quality
Coolant Pressure: 0 - 70 lbs adjustable
Generator: Pulse or Capacitor
Duty Cycle: 5% to 95% |
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 1445 | Horizontal and Vertical Hones |
| 1997 |
KADIA |
2VZH90350R |
Excellent |
Sold |
Photo /
More Info. |
| CNC Twin Spindle Hone with 4 Station Work Switcher: High production -High volume hone
new in 1997, used only 4 years
German Built
Twin honing spindles, independently controlled.
Auto Diameter adjustment
4 station work Switcher:
1) Load/unload
2) De-burring Station (Brush and flush)
3) Rough Hone
4) Finish Hone
Control" Unipos 470
stroke 350MM =approx 14"
Stroke Speed; 25 meters/min (1,000"/min)
Hoffman Paper Filter System
Full documentation (In English)
Includes some misc hones ranging from 1.11" in diameter up to 1.562" in diameter, but with proper tooling can hone a wider range of sizes
Dimensions:for Shipping
Computer controller- 21 in x 48 in 7 ft tall
Hone main machine:56 inches x 56 inches x 12 ft tall
Hyd. unit:38in x 60in 5ft tall
Filter system for hone oil:49in x 8ft x 5ft tall
|
|
| Ad # 6592 | Horizontal and Vertical Hones |
| — |
Sunnen |
MBB-1290-D |
Very Good |
Sold |
Photo /
More Info. |
| Sunnen Hone :Horizontal, BB-1290-D Hone, with Lots of Tooling: Model # MBB-1290-D
Spindle Speeds: 300-450 and 650-800 rpm
Work Light
Tooling: Cabinet (included) full of tool holders (approx: 15), honing stones and other tooling items.
Many of these items are new.
Example: One 4" hone sells for about $900.00 today |
|
| Ad # 1776 | Lapping & Polishing Machines |
| — |
Spitfire |
SP, ML.15 |
Good |
Sold |
Photo /
More Info. |
| 3-Station Lapping Machine: 3 Lapping Stations on Rotary Table
Compound Feeder |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 1354 | Gear Shapers |
| — |
PAMA |
DMA-805-S |
Good |
Sold |
Photo /
More Info. |
| PAMA GEAR SHAPER: Just arrived - in great shape
MORE DETAILS TO FOLLOW |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5806 | Miscellaneous / Other |
| — |
303 Stainless Steel Bar |
6 mm 303 Stainless Steel Bar |
New |
sold |
No Photo /
More Info. |
| 6 mm Diameter 303 Stainless Steel Bar - Certified: 10,000 lbs (approx) of 6 mm Diameter certified 303
Stainless Steel bar stock in 12' Lengths.
Bought to run a job on Swiss Type machines but
contract was cancelled. |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5708 | Power Squaring Shear (Hydraulic) |
| — |
Wysong |
Wysong 1010 |
Good |
SOLD |
Photo /
More Info. |
| 10' x 10 Ga. Wysong Hydraulic Shear with Manual Backgauge: Length: 10'
Capacity:
Mild Steel 10 Gauge
Stainless Steel 12 Gauge
Aluminum 3/16 " |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 1536 | Press Brakes (Mechanical) |
| — |
The Cincinnati Shaper Com |
90-14 |
Fair |
Sold |
Photo /
More Info. |
| Cincinnati 100 Ton Mechanical Press Brake: Specs: 14ft 100 ton
Series 70-90
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 1543 | Angle Bending Rolls |
| — |
Scottish Machine Tool |
2155 |
Fair |
Sold |
Photo /
More Info. |
| Mechanical Structural Bending Roll:
Specs: Angles 6 in. x 6 in. x 1 in.
Beams 18 in.
Electric Drive Motor: 25 hp
|
|
| Ad # 5642 | Initial Pinch & Pyramid Type Plate Bending Rolls |
| 2000 |
IMCAR |
4RH100, 4/2 |
Excellent |
Sold |
Photo /
More Info. |
| 5' x 3/16 4-Roll Hydraulic Double Initial Pinch Plate Bender: Working Length: 5'
Capacity: 3/16"
Central Roll Diameter: 6.7"
Lateral Roll Diameter: 5.9"
Total hp: 4 + 1
4RH100 Series are 4 roll, double initial pinch, full hydraulic plate bending machines. These units have independent hydraulic adjustment and inclination of both lateral bending rolls, hydraulic pinch roll adjustment with adjustable maximum pinch pressure, hydraulic drop end for rapid part removal and hydraulic powered rotation of the top roll and pinch roll using high efficiency hydraulic motors and planetary reduction units. Four roll plate rolls allow flat feeding of the sheet and eliminate wasteful pre-bending steps common to some other machine types. |
|
We found 5 matching ads. Now displaying the remaining 5 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5191 | Turret Punch Presses-CNC |
| — |
Strippit |
Fabri-Center 51/30 |
Fair |
sold |
Photo /
More Info. |
| 30 Ton Strippit Turret Punch Press: Press Capacity: 30 Ton
No. Of Turrets: 26 min. (may have more!)
Production Rate: 95 Holes/min on 1" Centers
Carriage Travels;
In X 52"
In Y: 52"
Carriage Speeds: 500 ipm (simultaneously)
Max. Workpiece Size: 51" x 51" x 1/4"
Ram Stroke: 7/8"
Feed Clearance: 13/16"
Accuracy: +/- 0.005" non-accumulative Tolerance
Hole Sizes.
Minimum: 0.031" in 16 ga Mild Steel
Maximum: 1-1/4" Dia. in 0.250" Mild Steel
3-1/2" Dia. in 10 ga Mild Steel
5" Dia. in 14 ga Mild Steel |
|
| Ad # 6446 | Turret Punch Presses-CNC |
| 1976 |
Strippit |
FC-1000 |
Very Good |
sold |
Photo /
More Info. |
| 30 Ton, 20 Station Strippit Turret Punch: 20 Station Turret
1 x Station notcher
30 ton
50" throat
1/4" in 3/8" capacity
3.5" hole in 1/8"
Programs stored on either disc or tape and machine can be run from either |
|
| Ad # 8566 | Turret Punch Presses-CNC |
| 1977(?) |
Strippit |
FC 1000 Fabri Center |
Good |
sold |
Photo /
More Info. |
| 30 Ton, 20 Station Strippit NC Fabri Center Punch Press: Capacity: 30 Ton
Tool Stations: 20
|
|
| Ad # 5982 | Turret Punch Presses-CNC |
| 1981 |
AMADA |
Coma 50-60-72 |
Very Good |
sold |
Photo /
More Info. |
| 50 Ton, 56 Tool Amada Coma NC Turret Punch: Control: Fanuc 200-B
Capacity
50 Ton
Sheet Size
60" x 72"(Longer Using Auto Repo)
Thickest Material
1/4" (3/8" Optional Clamping Req.)
Max. Hole Dia. In 1/4" M.S.
2 3/4"
Max. Hole Dia.
4 1/2"
Number of Stations
58 Sta. 2- Auto Index
Ram Stroke Length
1 1/4"
Strokes per Minute, Nibbling... 300
Axis Speed........................... 2000 In./Min.
Turret Speed......................... 30 R.P.M.
Hits per Minute 1" Moves....... 200
Nibbling Hits per Minute
300
Tape Format
E.I.A. or A.S.C.I.I.
Programming Mode
Absolute/Incremental
Smallest Programmable Increment.. .001"
Tape Reader................... 240 Char./Sec.
Axis Drive...................... DC Motor
Turret Drive................... DC Motor |
|
| Ad # 5709 | Turret Punch Presses-CNC |
| — |
Amada |
Pega King |
Very Good |
SOLD |
Photo /
More Info. |
| 33 TON, 58 STATION AMADA PEGA KING with 40" x 50" TABLE: NOTE!!! TWO MACHINES AVAILABLE
33 Tons
40" X 50" Table
Repositioning
58 Station
2 Auto Index Stations
475 Strokes Per Minute
Fanuc 6M Control
Pnematic Clutch & Brake
100's of pieces of tooling, guide sets and cabinets included
One of the machines has a Turbo Chip Conveyor
Model No. 6398-8005 Serial No. 310409
|
|
We found 5 matching ads. Now displaying the remaining 5 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8051 | Benders-Pipe and Tube |
| 2005/6 |
Horn CSM |
A89TNC-PB |
Excellent |
sold |
Photo /
More Info. |
| 3-1/2" Capacity CNC Tube/Pipe Bending Machine: Bending Capacity / Round Tube / Mild Steel (S=40kgf/mm2) mm 89.0 x 4.0
Bending Capacity / Round Tube / Non-Ferrous (S=25kgf/mm2) mm 89.0 x 7.0
Bending Capacity / Round Tube / Stainless (S=60kgf/mm2) mm 89.0 x 2.5
Bending Capacity / Square Tube / Mild Steel (S=40kgf/mm2) mm 60.0 x 5.0
Max. Bending Radius mm 50 ~ 300
Max. Bending Angle Degree 190
Max. Difference Between two Radii (R2-R1) mm NA
Max. Length over Mandrel mm 2600
Working Height mm 1160
Tooling Center Line Height mm 55
DOB (Bending) Speed deg / sec 30
Accuracy of DOB (Bending) Degree ฑ0.15
POB (Rotation) Speed deg / sec 94
Accuracy of POB (Rotation) Degree ฑ0.1
Motor for Hydraulic Kw 12.5
Max. Pressure kgf / cm2 140
Hydraulic Tank Capacity Liter 160
Machine Length mm 5200
Machine Width mm 1350
Machine Height mm 1350
Machine Weight Kg 3500
Accuracy of DBB (Feeding) mm ฑ0.1
POB (Rotation) Speed deg / mm 240
Accuracy of POB (Rotation) Degree ฑ0.1
Motor for Hydraulic Kw 7.5
Total Power Kw 32
Max. Pressure kgf / cm2 140
Hydraulic Tank Capacity Liter 180
Control:
PLC Based with 10" LCD Touch Screen Control.
Right Hand Bending.
Single Stack Tooling.
BEND (C axis) is driven by Hydraulic drive system and encoder.
Smart Carriage
Rotation (B axis) - AC Servo Motor Drive. Gives exact and repeatable plane of bend position. Distance between bends (Y axis), with 8 adjustable stops for gauging the distance between bends.
Program Storage: Max. 100 components with up to 10 bends.
Digital setting and memory for Pressure of bending, clamping and mandrel retraction.
Spring Back Compensation Setting.
Display of malfunctions.
Pressure Die assist with adjustable controls (Booster).
Anticipated Mandrel Retraction Unit (AMRU).
Drop away Clamp.
Water Cooling System. (optional air system).
One-shot Slideway Lubrication to bend arm assembly for helping to reduce maintenance time.
Foot Pedal Cycle Start-E-Stop.
Wiper Die Bracket.
3 Mandrel Rods.
Operator and Maintenance Manuals.
Tool Box with basic tools.
Electricity: As Required.
Bending Capacity may vary depending on OD, WT, CLR and Material.
The general information in this document is not binding in details.
Horn Machine Tools, Inc. retains the right to amend designs from time to time without prior notice.
Single stack bender with a manual Y axis
|
|
| Ad # 8052 | Swagers |
| — |
Fenn |
HydroFormer 2-H |
Good |
sold |
Photo /
More Info. |
| 2" FENN 2-H Hydroformer: Hydraformer
Capacity: 2" tube
Solids: 15/16"
3" depth
2 piece Die-extra rollers & hammers
lots of tooling approx: $10,000 worth
|
|
| Ad # 6634 | Benders-Pipe and Tube |
| — |
Superior Mufflers/Worth |
2-1/2" |
Very Good |
Sold |
Photo /
More Info. |
| Hydraulic Muffler Pipe Bender with Tooling: Bend Radius Settings: 0 - 180 deg.
Internal Pipe Swaging Mandril Attachment (with sets of swages)
5 Hp motor
Unit on Castors |
|
| Ad # 5983 | Benders-Pipe and Tube |
| 1959? |
Pines |
3/4 |
Fair |
sold |
Photo /
More Info. |
| Pines Model 3/4 Pipe Bender With Lots of Tooling: Maximum Radius..........................10" ... |
|
| Ad # 5977 | Benders-Pipe and Tube |
| 1997 |
Ercolina |
TB 60 -Top Bender |
Good |
Sold |
Photo /
More Info. |
| 2-1/2" Pipe Dia Cap.: Pipe/Tube Bender: Capacity:
Min. Diameter: 1/4"
Max. Diameter: 2-1/2"Pipe
Min. CLR: 2D
Max. CLR: 15"
Angle Range: 0 - 180 deg
Bending Speed: 2.5 rpm max.
Mandrel Capable? - NO
Programming: NC 10 Individual programs with (9) bends within each. |
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 4189 | Ironworkers |
| 1990 |
GEKA |
Geka Hydracrop #55A |
Very Good |
Sold |
No Photo /
More Info. |
| GEKA 55-TON HYDRAULIC IRONWORKER :
IRONWORKERS
4" x 4" x 1/2" Geka Hydracrop #55A ,55 Ton, 20"thr,work tbl.w/gauge,12" shear
Capacity 55 Tons
Shear Capacities:
Maximum Flats: 5/8" x 12" or 3/4" x 8"
Maximum Angles: 4" x 4" x 1/2" or 4-1/2" x 4-1/2" x 3/8"
Maximum Bar: 1-9/16" Round & Square
Maximum Punch: 1-1/8" x 1/2" or 3/4" x 3/4"
Maximum Notch: 1-5/8" x 3-1/2" x 3/8" Thick
Throat Depth 20"
Stroke Speed 43
Motor 6ฝ H.P. 230/460 Volt, 3 Phase
Equipped With:
20" Deep Punch End Throat
Work Table on Punch and Coper Ends w/ Adjustable Back Stops
Electric Length Gauge
Electric Foot Pedals
20 plus punches & dies
Worklight |
|
| Ad # 6553 | Powered: Hole / Turret Punches |
| — |
Heck |
3-C |
Very Good |
sold |
Photo /
More Info. |
| Heck Trace-A-Punch Duplicator, Model 3-C, Nibbler and Punch: Cutting Capacity:
Mild Steel, Stainless Steel and Plastics: 1/8" max
Throat: 6-3/4"
Motor: 1.5 hp
Strokes per minute: 1,750 spm
Work Light
Stand |
|
| Ad # 5984 | Ironworkers |
| 1985 |
Scotchman |
314-C |
Good |
Sold |
Photo /
More Info. |
| 40 Ton Scotchman 314-C Ironworker: Model: 314-C
Flat Bar Capacity:
Punch Capacity:
Angle Shear Capacity: 3" x 3" x 0.25"
Tonnage: 40
Specification Description
TONNAGE 40 TON
BAR SHEAR 14"
ANGLE SHEAR 3"
WEIGHT 1300 LBS
Model 314C -std specs-verify..
Throat depth 6"
Punching: 1" diameter x 1/2" thick, 11/4" diameter x 3/8" thick
Cropping: angle 3" x 3" x 5/16" @ 90 degrees, 2" x 2" x 5/16" @ 45 degrees
Shearing: 10" x 1/4", 6" x 1/2", 5" x 5/8"
Dimensions: 4' Length x 2'4" Width x 4'4" Height
Power: 3 HP
|
|
We found 5 matching ads. Now displaying the remaining 5 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 1539 | Mig & Tig Arc Welders |
| — |
Lincoln |
— |
Fair |
sold |
Photo /
More Info. |
| 8 Station Lincoln Welding Unit: Spec: (8) Welding Stations
|
|
| Ad # 1319 | Portable Welders |
| — |
Hobart |
Hobart RC 400 |
Good |
sold |
Photo /
More Info. |
| Hobart 400 Amp Portable DC Power Supply: NOTE:
POWER SUPPLY ONLY |
|
| Ad # 1320 | Portable Welders |
| — |
Miller |
Miller Goldstar 400SS |
Good |
sold |
Photo /
More Info. |
| 400 Amp Portable DC Welder Power Supply: NOTE:
Power Supply Only.
Power Supply for wire feeds |
|
| Ad # 1321 | Mig & Tig Arc Welders |
| — |
Miller |
Deltaweld 650 |
Good |
sold |
Photo /
More Info. |
| Miller Deltaweld 650 Power Supply: NOTE:
Power Supply Only
Power supply for wire feeds
Customer has 2 of these units for sale |
|
| Ad # 6594 | Dust / Exhaust Collectors |
| — |
Donaldson Torit |
Model 84 |
Good |
sold |
Photo /
More Info. |
| Torit Model 84 Dust Extraction Unit: Motor Power: 3 hp
4" Connector Tube
Unit mounted on castors for mobility |
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5521 | Hydraulic C-Frame Press |
| 1982 |
Draflex |
15 Ton |
New |
sold |
Photo /
More Info. |
| 15 Ton "Negri" Style Hydraulic Injection Press: Capacity: 15 Ton
Table Size" 12" x 12"
Throat: 12" |
|
| Ad # 5409 | Gap Frame Presses |
| — |
Chicago Dreis & Krump |
SS-150-48-120 |
Very Good |
sold |
Photo /
More Info. |
| 150 TON, 150" x 48" Bed Gap Frame Press: Mechanical Action
Press Capacity: 150 Tons
Bed Size: 150" x 48"
Max. Opening: 12"
NOTE: Bed raised additional 8"
Safety Gate with touch sensor strip
2 x Safety Cups
Infeed System comprising of:
PLC Controller (GE 300 Line Control)
6 Feed Rolls
Split Rolls (To run 2 different dies at the same time)
Requires a 3' pit |
|
| Ad # 5678 | Miscellaneous Presses |
| — |
Fabriline 3 |
F-459 |
Very Good |
SOLD |
Photo /
More Info. |
| 100 Ton Fabriline Beam Punch/Press Line: Equipment Type: Beam line
Make: Fabriline 3
Model: F-459
Capacity: 100 ton
No of Punches: 3 total (1 vertical, 2 horizontal)
Controls: Automatic Controls, computer 286, floppies
Last updated: 1986 (controls updated)
Conveyors: 50' each side
Beam turning system: Yes |
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 7876 | Plasma |
| 1997/8 |
KOMATSU |
RAZOR |
Very Good |
SOLD |
Photo /
More Info. |
| 4' x 8', 40 Amp Komatsu RAZOR Fine Plasma Cutting MAchine: Cutting Area: 4' x 8'
Generator Output: 40 Amp
Plasma Unit: Type JU 1201, Fine Plasma unit G-940-II
System Model: KPG940-B2
Gas Cooling Unit
Cutting Capacity - (General and Depending upon cutting speed):
1/4" in Mild Steel
7 ga in Stainless Steel
14 ga in Aluminum
All original documents - Programming, operational, maintenance, parts etc
|
|
| Ad # 5698 | Plasma |
| — |
Hypertherm |
10 x 25 |
Very Good |
sold |
Photo /
More Info. |
| 10' x 25' Plasma Fuel Gas Cutting Table: Cutting Surface: 10' x 25' per Tank
(2) HT 2000 Hypertherm Power Sources
(1) Burny-5 with 540 Servo Pac
(2) Plasma Torches
(2) Fuel Gas Torches
(2) Water Tanks |
|
| Ad # 5613 | Water Jet |
| 2000 |
Precision Cutting Systems |
4ft x 8 ft |
Very Good |
sold |
Photo /
More Info. |
| Gantry Style 4ft. x 8ft. Waterjet (Dual Head capability): Type: Gantry style cutting table w/ Paser 3 cutting head
Rigged for dual head cutting capability.
Rise/Fall cutting table for cutting under water.
NEE control w/ shape library (NEE is a division of Cleveland Motion Control (Manufacturers of motors for Bridgeport and others)
Networkable for offline programming using G-Code or CAD-CAM package of your choice. (Programable in G-Code using Notepad.)
Flow Dual Intensifier - 50Hp pump in great condition
Manual Z
Dual Cutting Head capability. (This allows you to cut out two identical parts at a time)
Cooling fan and pump for Flow pump (this cools the hydraulic fluid)
4 foot x 8 foot cutting envelope
Touchsystems touchscreen
Booster pump and 3 filter system for incoming water
200 lb garnet hopper
Presently use a .012 sapphire orifice and a .040 nozzle for cutting
Water only cutting capable for foam, plastic, and gasket materials
Gantry is made by Precision Cutting Systems
Options
Motor Starter $2500.00 |
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5291 | Air Compressors, Rotary Screw Type |
| 95? |
JOY |
D185QP |
Good |
sold |
Photo /
More Info. |
| Joy Compressor, Kelco Sand Blaster and Jack Hammer: Complete System Including:
Portable (on trailer) Joy D185QP Screw Compressor
Jack Hammer with 8 Bits
Commercial Kelco Model # 114 Sand Blaster and Hoses
More Photographs Available |
|
| Ad # 7818 | Air Compressors, Rotary Screw Type |
| — |
Ingersoll-Rand |
SSR-EP15 |
Very Good |
sold |
Photo /
More Info. |
| 53 cfm, 15 hp, Ingersol-Rand Rotary Screw Compressor: Rotary Screw
53 CFM @ 125 PSIG
15 hp |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 8240 | Engine & Machine Shop Equip. |
| 2006 |
FADAL |
VMC 6030-HT |
Excellent |
Sold |
Photo /
More Info. |
| 60 x 30 FADAL 5-Axis VMC for Cylinder Head Machining: Box Way Construction
Full 5-Axis Simultaneous Operation
Table Size: 62.5" X 30"
Max Table Load: 4,120 Lbs
Spindle Nose to Table 5.5" TO 35.5"
Travels:
X-Axis: 60"
Y-Axis: 30"
Z-Axis: 30"
Spindle Taper: 40 Taper
Speed Speed: 40 RPM to 10,000 rpm inf variable via Auto HI/LOW Drive
Spindle Motor Power: 22.5 hp
Positions 30 ATC
Max. Tool Diameter 6" (Without Adjacent Tools) -(4.5" w/30 tools).
Max. Tool Length 15",
Max. Tool Weight 15 lbs.
Rapid Rate 400 IPM
Cutting Rate 0.01" to 250 IPM
Axis positioning ฑ.0003". repeatability ฑ.00015".
Control: FADAL MULTIPROCESSOR
OPTIONS:
30 ATC
4 MB RAM Memory on CNC
Rigid Tapping
Remote Manual Pulse Generator Panel w. E-Stop
Glass Scales on X, Y and Z axis. (Heidenhain)
Air-Hydraulic Pump for 4th and 5 th Axis
4th Axis Interface
5th Axis Interface
Rotary Tables:
A-Axis Table: NIKKEN CNC 401, 0.001 deg indexing
B-Axis Table: NIKKEN CNC 200, 0.001 deg indexing
|
|
We found 5 matching ads. Now displaying the remaining 5 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 1497 | Comparators |
| — |
Mitutoyo |
PH 350 |
Very Good |
sold |
Photo /
More Info. |
| Mitutoyo Optical Comparitor: 14" Screen
All complete |
|
| Ad # 1446 | Hardness Testers |
| — |
Wilson |
3JR and 3JS |
Good |
sold |
Photo /
More Info. |
| Wilson Hardness Testers, Direct & Superficial: TWO DIFFERENT TYPES AVAILABLE:
1) Wilson DIRECT Reading Hardness Tester
2) Wilson SUPERFICIAL Reading Hardness Tester
Both have a 10" throat and come with a misc.
collection of anvil test blocks |
|
| Ad # 1444 | Coordinate Measuring Machine, (CMM) |
| 1985 |
Sheffield |
Cordex 72-A |
Good |
Sold |
Photo /
More Info. |
| Large Swing Arm Type- CMM: Measuring Height: 96"
Table: 60" x 48"
4 Axis DRO (X,Y,Z, and W)
Mounted on solid Cast Iron Table |
|
| Ad # 1425 | Miscellaneous Inspection Equipment |
| '97 ? |
Parlec |
240 |
Very Good |
sold |
Photo /
More Info. |
| Parlec Model 240 with Projector: Control MP 1000
Set up with 30 Taper receptor but that can be changed/added to what you need
Projector/viewer (see photo)
Test Bar in original wooden box
Sits on granite base and cabinet (included)
Full documentation
|
|
| Ad # 1426 | Miscellaneous Inspection Equipment |
| 97? |
Parlec |
220 |
Very Good |
sold |
Photo /
More Info. |
| Parlec 220 Tool Presetter with Projector: Control MP 500
Projector (as shown)
Presently setup with 30 Taper receptor but that can easily be changed/added |
|
We found 12 matching ads. Now displaying the remaining 12 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 1523 | Miscellaneous Plastic Accessories & Equipment |
| 1987 |
Kent |
PP Series |
Good |
sold |
Photo /
More Info. |
| Kent Pad Printer: 15 PM
with burn tables etc |
|
| Ad # 1521 | Miscellaneous Plastic Accessories & Equipment |
| 1986/7 |
Decorating Resource |
Frisbee |
Good |
sold |
Photo /
More Info. |
| Frisbee Hot Stamp Roll Machine: 20 P.M.
Size: 9" |
|
| Ad # 1522 | Miscellaneous Plastic Accessories & Equipment |
| 1992 |
Electronic Liquid Fillers |
CT 600 |
Good |
sold |
Photo /
More Info. |
| E.L.I. Lidding Machine: 100 PM
Size: 160 mm |
|
| Ad # 1525 | Miscellaneous Plastic Accessories & Equipment |
| — |
Peligro |
— |
Good |
sold |
Photo /
More Info. |
| Peligro Permanant Label Hot Stamp Roll-On Machine: 18 PM
size: 5 x 10 label feed |
|
| Ad # 1524 | Miscellaneous Plastic Accessories & Equipment |
| 1994 |
Label Air |
2114-M |
Good |
sold |
Photo /
More Info. |
| Label Air Machine: 120 PM |
|
| Ad # 1519 | Miscellaneous Plastic Accessories & Equipment |
| 1988 |
— |
— |
Good |
sold |
Photo /
More Info. |
| Auto Roll Screen Print Press: Stroke: 14" |
|
| Ad # 1526 | Miscellaneous Plastic Accessories & Equipment |
| 1992 |
STAMPRITE |
— |
Good |
sold |
Photo /
More Info. |
| STAMPRITE Hot Roll Machine: 15 PM
size: 5 x 10 label feed |
|
| Ad # 1520 | Miscellaneous Plastic Accessories & Equipment |
| 1988 |
Franklin |
SPEC |
Good |
sold |
Photo /
More Info. |
| Franklin 2 Head Hot Stamp Printing Machine: Size: 10" x 6"
|
|
| Ad # 5028 | Injection Molding Machines |
| — |
Van Dorn |
75 Ton |
Good |
sold |
Photo /
More Info. |
| 75 Ton Van Dorn Plastic Injection Molding MAchine: Just Arrived!! More Details to follow |
|
| Ad # 4861 | Injection Molding Machines |
| 68/69 |
Van Dorn |
125-RS-6 |
Good |
sold |
Photo /
More Info. |
| Van Dorn 125 Ton, 6 oz Shot Toggle Clamp PIM: 4 x 2.5" diameter Tie Bars
Distance Between Tie Bars: 13 3/4" all ways
Shut Height: 4" min, 15" max
Controls:
ATC Solid State Timers
Barber Coleman Temperature Controls |
|
| Ad # 1778 | Miscellaneous Plastic Accessories & Equipment |
| — |
SterlTronics |
S64 12-A |
Good |
Sold |
Photo /
More Info. |
| Water Temp Control Units : Used mainly for Plastic Injection machine mold temp control
0 - 250F Control range
Heater 9 KW, 14 Amps
150 psi max
3 UNITS AVAILABLE |
|
| Ad # 1775 | Injection Molding Machines |
| — |
TrueBlood |
A-30-3 |
Good |
Sold |
Photo /
More Info. |
| Vertical Injection Shuttle Molding Machine: 30 ton,
3 oz machine with twin pallets |
|
We found 5 matching ads. Now displaying the remaining 5 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 1450 | Heat Treat Ovens |
| — |
Lucifer |
42-036 |
Good |
sold |
Photo /
More Info. |
| Lucifer 1,600 F Oven: 18"W x 18"H x 36"D
Max Temp 1,600F; 0-850 Deg C
Fully controlled Temp, alarm)
Chart Recorder |
|
| Ad # 1448 | Heat Treat Ovens |
| — |
Grieves |
AB-850 |
Good |
sold |
Photo /
More Info. |
| Grieves Heat Treat Oven - 850F: Max Temp: 850 F
18kw
36" Square work area
Fully Controlled
36" x 36" x 36"
Used for burn off or tempering.
Has a exhuast blower |
|
| Ad # 1447 | Heat Treat Related Equipment-Misc. |
| — |
Taylor-Winfield |
MKU-5 |
Good |
Sold |
Photo /
More Info. |
| Induction Heater and Work(Brazing) Bench: 5 KW Induction Heater unit, 0-100 cal
600 - 1,400 F
Fully controlled with timer and Ircon non-contact optical pyrometer |
|
| Ad # 6559 | Autoclaves / Sterilizing Chambers |
| Nov 70 |
Turbo Machine Company |
FS-1200 |
Good |
sold |
Photo /
More Info. |
| 66" x 150", 55 psi, 305F Turbo Machine, Autoclave: National Board # 8323
Max Design Pressure: 55 & FV psi @ 305 F
Max. Design Temperature: 305 F & 55 & FV psi
Inspection Ins. EC in
Shell: 312 in
Head: 312 in
Radius of Diam: 66"
Length: 150" |
|
| Ad # 6560 | Autoclaves / Sterilizing Chambers |
| 1974 |
Turbo Macine Company |
FS-1200 |
Good |
sold |
Photo /
More Info. |
| 66" x 150", 55 psi, 305F Turbo Machine Autoclave: Max Working Pressure: 55 psi
Max Working Temp: 305F
National Board #: 1015-00
Dia" 66"
Length: 12" 6" |
|
We found 4 matching ads. Now displaying the remaining 4 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 1443 | Forklifts / Lift Trucks (All Types) |
| 1997 |
Portec Pathfinder |
K7710K |
Very Good |
sold |
Photo /
More Info. |
| Electronic Wire Guided Tows - Almost New: Control Chief Type 464/A.
Reciever System 460
Operates at 433,92 MHz
Max Draw Bar Pull = 750 lbs
Rated Speed = 480 ft/min
Rated Load = 10,000 lbs
3 Available
Spare Battery Supplied with each tow
Battery Charger (EO Type, 24V) supplied with each tow
Designed for automatic (floor follow strip)or manual operation.
All automatic equipment included |
|
| Ad # 1422 | Forklifts / Lift Trucks (All Types) |
| — |
Strata |
NRO 35AANL |
Good |
sold |
Photo /
More Info. |
| 3,550 lb Forklift AND Charger: 3,500 lb Capacity
272" Fork Height
INCLUDES a Battery Charger |
|
| Ad # 7667 | Forklifts / Lift Trucks (All Types) |
| — |
TOYOTA |
FGC-45 |
Good |
sold |
Photo /
More Info. |
| 10,000 lbs, LP Triple Mast TOYOTA Fork Lift Truck: Lift Capacity: 10,000 lbs
Triple Mast
Max. Lift Height: 184"
Fork Blades: 6' long
LP Powered |
|
| Ad # 5972 | Cranes/Hoists & Manipulators |
| 1999 |
Cogan |
Instant Lift IL-1000 |
New |
sold |
No Photo /
More Info. |
| 2,000 lb Cogan IL-1000 Vertical Reciprocating Frieght Elevator: NEW!! STILL IN ORIGINAL PACKAGING!
Lift Capacity: 2,000 lbs
Cage Size: 60" x 60" x 84" H
Mezzanine Height: 12" 0" above ground
Total Depth: 97"
Speed: 16 fpm at 24" load center
Safety Features:
Falling Platform Device
Automatic Self Levelling at Upper Levels
Side Stabilizing Rollers
Mechanical Over-travel Stop Block
Security Cage Top and Bottom C/W Signage and
Doors are Electro-Mechanically Interlocked
All assembly drawings, operation and maintenance
documentation included
Color: Powder Painted Blue and Grey
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5971 | Cleaning Equipment |
| 2001(?) |
Kleentec |
PW 500AM |
New |
Sold |
Photo /
More Info. |
| Top Loaded Agitating Heated-Die Washer: Kleer-Flow Model PW 500AM (now owned by Kleentec and designated the PW 500 ... |
|
| Ad # 4762 | Painting / Coating Equipment |
| 1997 |
Alternate Energy |
#WB-250 HVS |
Very Good |
sold |
Photo /
More Info. |
| LPG (Propane) Water Bath Vaporizer & Mixer: Capacity: 20 MBTU/hour
Dual Venturi Pipe System
MAWP: 250 psi @ 600 F
MDMT: 0 F @ 100 psi
Vaporizing Capacity: 250 GPM
W:
SH: 154
HD: 154
Burner BTU 300,000
Vapour Area: 19 sq ft - LP Gas
Mixture/Holding Tank Capacity: Est 80 - 100
galls |
|
| Ad # 5795 | Bead & Shot Blasters |
| 1987 |
Wheelabrator |
LERC 4/20 Blast Machine |
Very Good |
SOLD |
Photo /
More Info. |
| 22" x 40" x 15' Long 4 Wheel Pass Thru Shot Blaster w. Dust Extractor: Low Energy Blast Machine:
Part Entrance: 22" x 40"
Blast Chamber Length(Total): 15'
4 Wheel System
Elevator
Screw Conveyor
Dust Extractor Size: 4' x 5' x 5' H
Dust Extractor Type: MPF # 33
Electrical Controls for:
Ventilator
Screw Conveyor
Shot Controls
Elevator
Total Conected Load: 94 hp, 119 Amps @ 480V, 3 Phase. |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 6582 | Saws |
| 2002 |
North State/LeNeave |
TSC-10BL |
Good |
sold |
Photo /
More Info. |
| 27" x 40" Tilt Type Table Arbor Saw With 10" Blade: Table Size: 27" x 40" (with two "T" Slots)
Blade Size: 10" diameter
Drive Motor Power: 3 hp (brand new)
Tilt: 45 degrees
FACTORY SPECIFICATIONS: MODEL TSC10HB
Diameter of Arbor 5/8" (16mm)
Arbor Speed 4000 RPM
Motor 3 HP
Saw arbor diameter 5/8"
Max depth of cut at 90 deg.: --- 3"
Max depth of cut at 45 deg: -- 2-3/4"
Table size (extended): ---------- 40"
Table height from floor: -------- 34.1
Front guide rail size: ----------- 78"
Rear Guide rail size: ------------ 78"
Fence size: ------------------- 33.5" x 2.1"
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 1777 | Electrical Equipment (All Types) |
| — |
SterlTronics |
S64 12-A |
Good |
Sold |
Photo /
More Info. |
| Water Temp Control Units : Used mainly for Plastic Injection machine mold temp control
0 - 250F Control range
Heater 9 KW, 14 Amps
150 psi max
3 UNITS AVAILABLE |
|
View Detailed Ads
Content copyright ฉ 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
