Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 14851 | Vertical Machining Centers (VMC) |
1999 |
Hurco |
BMC2416/SSM |
Good |
Sold |
Photo /
More Info. |
24 x 16 travels: 1999 Hurco BMC 2416/SSM vertical machining center
control:Hurco SSM
main motor spindle: 10HP
chip auger
ridged tapping
very little tooling included
Note:control is loaded with every factory option Hurco
offered including 3D mold,DXF,ultripro software,milti-
pockets,,ultinet.It is running and I’ve had no problem getting
parts. Has a new control panel on it. I used to work factory
service for Hurco so I have put some time into it.
Model #: BMC2416
Mfg: 1999
std. factory specs below-verify actual machine
Specifications:
Table .. 29.5" x 15.7"
Max Load on Table ...... 760 lbs
Travels, X-Axis .... 24”
Travels, Y-Axis .... 16”
Travels, Z-Axis .... 22”
Main Motor ...... 10 HP
Spindle Speed : 80 - 8,000 RPM
Spindle Axis Torque/RPM ….. 100 ft-lb / 500 (30 min)
Spindle Taper: CAT 40
ATC :24 (Swing Arm)
Rapid Traverse ……….….……. 945 IPM (X,Y)
Rapid Traverse ……….….……. 590 IPM (XZ)
Max Thrust Rating …….….…... 1450 lbs. (X,Y) 2490 (Z)
Operating Dimensions :139" W x 135" D x 103" H
Shipping Dimensions : 89" W x 116" D x 96" H
Machine Weight: 9,040 lbs
note:this is a great machine and has been upgraded and
fully tested,ready to go!
rigging/loading fee add $800.00
|
|
Ad # 10032 | Vertical Machining Centers (VMC) |
2008 |
2008 Hyudai-Kia VX400 |
2008 Hyudai-Kia VX400 |
|
sold |
Photo /
More Info. |
: Table Size 39.4\" x 18.1\"X Axis Travel31.5\"Y Axis
Travel18.1\",Z Axis Travel 20.5\"Distance from
Column to Spindle Center18.7”Distance from
Spindle Nose to Table Top5.1” – 25.6”
Rapid Traverse Rates (X,Y,Z)1260 IPM,Cutting
Feedrate394 IPM
Magazine Capacity24 ATC,Spindle Nose40,Spindle
Speed12,Spindle Motor15 Spindle Torque51.4 ft-
lbs,Max Tool Diameter / Adjacent Empty3.5” / 5.9”
Max Tool Length / Weight11.8” / 17.6 lbs
Tool Change TimeTT 2.1 sec / CC 7.0 sec
Machine Dimensions120\" x 82\"
Weight11,250 lbs estim. |
|
Ad # 14176 | Vertical Machining Centers (VMC) |
1986 |
NTC |
TMC-50E |
|
sold |
Photo /
More Info. |
: NTC 3-Axis CNC Vertical Machining Center (1985);
Work Envelope 43" x 23",
Table 55.1" x 22.8",
Spindle Speeds 3,500 RPM Max;
25 Position ATC - 50 Taper,
Fanuc 11M CNC Control,
Spindle HP 15/7.5
|
|
Ad # 3087 | Vertical Machining Centers (VMC) |
2003 |
Victor |
VMC 2615 |
Demo Machine |
sold |
Photo /
More Info. |
Victor VMC 2615 Machining Center: Table working area: 15" x 26"
T-slots: 0.7" x .011" x 3.94"
Table overall size: 30.7" x 17.8"
Max. loading weight: 661 lbs.
Floor to table surface: 32"
X = 19.7"
Y = 15.8"
Z = 15.8" + 3.94"
Spindle nose to table: 3.94" - 19.7"
Spindle center to column surface: 17.8"
Spindle speed: 60-6000 rpm
Spindle taper: IS no. 40
Spindle bearing: P4
16 Tools
Tool holder: MAS BT-40 P40-1
ATC time: 7 seconds
Coolant Pump Motor: 1/4 hp
Fanuc AC 8P
SPM-11
Spindle air blast
spindle orientation: electric |
|
Ad # 2364 | Vertical Machining Centers (VMC) |
2003 |
Atrump |
1250 B5AC |
Demo Machine |
sold |
Photo /
More Info. |
Atrump 1250 B5AC CNC Milling Machine: Table size: 12" x 50"
Spindle Motor: 7 1/2 HP, 3 phase, 220V
Spindle speed: 60-6000
Spindle nose to table: 4 5/16" to 23 3/8"
Travel: X: 33-1/2" Y: 18" Z: 19"
Taper: CAT #40 Control: 110V
Floor space: (LxWxH) 124" x 84" x 99"
Spindle Center to Column: 18 7/8"
Tool Change Time: 6 ~ 12 seconds
Precision ball screws on X, Y, Z Axis, 1-1/4"
w/double nut.
Chromed quill
Super wide saddle
ATC armless type tool changer (16 mag.)
Control: MIRL 2000
ISO 9002 Quality Certified |
|
Ad # 4125 | Vertical Machining Centers (VMC) |
New |
Victor |
FV-32A |
Demo Machine |
sold |
Photo /
More Info. |
Victor FV-32A w/ Mitsubishi M3 Control: Travel (X) 31.5"
Travel (Y) 17.7"
Travel (Z) 20"
Spindle Motor 7.5 HP/10 HP (cont./ 30 min.)
Spindle RPM:Standard 60-6,000 rpm (Belt type);
Opt.: 100-10,000 rpm (Belt type) & 100-12,000 rpm
(Belt type)
No. of Tool Pos. 18 20
Accuracy +0.0005”
Repeatability +0.0001”
Tools: 20
Tool shank: Taper 40
Max. Tool Weight: 13.2 lbs.
Max. Tool Length: 3.8"
Max. Tool Diameter: 3.1"
Tool Change Time: 3.5 seconds
|
|
Ad # 8012 | Vertical Machining Centers (VMC) |
2005 |
Twin Horn |
VH-850 |
Demo Machine |
Sold |
Photo /
More Info. |
34 x 20 ,15HP, 8000 RPM, 24 tool arm style VMC: Twin Horn Model VH-850 VMC,complete with turcite coated and precision scrap... |
|
Ad # 4126 | Vertical Machining Centers (VMC) |
New |
Victor |
VMC 2615 |
Demo Machine |
sold |
Photo /
More Info. |
Victor VMC-2615 Machining Center w/ Fanuc 0-M: Travel (X) 19.7"
Travel (Y) 15.8"
Travel (Z) 15.8"+3.94"
Spindle Motor 3.5kw (cont)5,5kW (30 min)
Spindle RPM 60-6,000 rpm
No. of Tool Pos. 16 24 20
Accuracy ±0.00039”
Repeatability ±0.00012”
Number of Tools 16
Tool Holder Taper 40
Max. Tool Weight 15.4 lbs.
Max. Tool Length 9.84"
Max. Tool Diameter 3.15"
|
|
Ad # 9821 | Vertical Machining Centers (VMC) |
1982 |
BRIDGEPORT |
|
Excellent |
Sold |
Photo /
More Info. |
42" PROTO TRAK PLUS: IN EXCELLENT SHAPE |
|
Ad # 7459 | Vertical Machining Centers (VMC) |
2001 |
Mori Seiki |
MV-653B |
Excellent |
Sold |
Photo /
More Info. |
2001 Mori Seiki MV-653B CNC Vertical Machining Center: Fanuc 18
Auto Pallet Changer
CAT 50
60 Tool ATC
60" X 26" X 25" Travels
6,000 RPM
Chip Conveyor
Full Machine Specifications
WORKING SURFACE 66.9" X 26"
TABLE LOAD CAPACITY 4400 LBS
X-AXIS TRAVEL 60"
Y-AXIS TRAVEL 26"
Z-AXIS TRAVEL 25"
SPINDLE NOSE TO TABLE TOP 8.7" - 33.5"
SPINDLE DRIVE MOTOR 25HP
SPINDLE TAPER CAT 50
SPINDLE SPEEDS 6,000 RPM
CUTTING FEED RATES 0.01 - 393.7"
RAPID TRAVERSE RATES 944.9 IPM (X,Y,Z)
NUMBER OF TOOLS 60
MAXIMUM TOOL WEIGHT 44 LBS
MAXIMUM TOOL LENGTH 17.7"
MACHINE WEIGHT 35,260 LBS W/O APC
FANUC MSG 501 (18iM) CNC CONTROL
SPINDLE CHILLER
2-PALLET FACTORY PALLET CHANGER
RIGID TAPPING
CHIP CONVEYOR
SCALE FEEDBACK X & Y
FULL GUARDING
ALL AVAILABLE MANUALS
EQUIPPED WITH: |
|
Ad # 8694 | Vertical Machining Centers (VMC) |
1995 |
Kitamra |
Mycenter 3X |
Excellent |
Sold |
Photo /
More Info. |
30" x 16" x 18": Kitamura Mycenter 3X
Stock Number: 201892
Age: 1995
Condition: Excellent
Specification Description
Table Size 32.3" x 16"
Travels:
X-Axis 30"
Y-Axis 18"
Z-Axis 18.1"
Rapid Traverse 1181 IPM
Spindle Speed 20 - 10,000 RPM
Spindle taper 40
Tool Changer 20 ATC
Gear Ranges 2
Spindle Motor 15 HP
Machine Dimensions 138.8" x 105.7" x 121.6" H
Machine Weight (approx.) 14,332 lbs
Equipped With:
Yasnac i80 CNC Control
RIGID TAP
Chip Conveyor
Coolant System
Available Books Manuals
|
|
Ad # 11880 | Vertical Machining Centers (VMC) |
1995 |
Fadal |
904-1 |
Excellent |
sold |
Photo /
More Info. |
30" x 16" x 20": Fadal 904-1
Year 1995
Wired 220/3 Phase
Machine Control: Fadal CNC 88HS
Table Size: 39" x 16"
Machine Travels (X/Y/Z): 30" x 16" x 20"
Spindle to Table: Max 24"
Table Capacity: 2,736 Lbs.
Spindle Taper: Cat 40
Spindle Speeds: 80 - 10,000 RPM
Rapid Traverse Rate (X/Y/Z): 900 / 900 / 700 IPM
Maximum Cutting Feed Rate: .1 - 400 IPM
Tool Changer Style: Carousel
Tool Changer Capacity: 21 Stations
Max Tool Length: 15"
Max Tool weight: 15 Lbs.
Spindle Drive: 15 HP
|
|
Ad # 14307 | Vertical Machining Centers (VMC) |
1999 |
Haas |
VF-1 |
Excellent |
sold |
Photo /
More Info. |
Table: 26" x 14": Haas Vertical Machining Center (high
torque,30HP
Model: VF-1
Capacity: Table 26" x 14"
Travels:
X-Axis 20”
Y-Axis 16”
Z-Axis 20”
30HP High Torque power machine and 2 speed
Gear
Box
New "windows" purchased directly from Haas
and
installed last year ($1,140.00)
Upgrades for this machine:
30 HP spindle
10,000 RPM spindle
Programmable Coolant
Chip Auger
4th Axis Prewire
Haas QuickCode
Rigid Tap
Brushless Servos
USB (converted from floppy drive)
|
|
Ad # 10527 | Vertical Machining Centers (VMC) |
1995 |
Shizuoka |
GRA-Fighter CM-200 |
Excellent |
sold |
Photo /
More Info. |
Graphite mill: SHIZUOKA CNC GRAPHITE MACHINING CENTER
MODEL: "GRA-FIGHTER" CM-200
MFG. IN 1995, SOLD NEW IN 1999
FANUC 16M CNC CONTROL
X-11.8", Y-8", Z-6"
10,000 RPM, BT-30 TAPER
8 POSITION ATC
EXCELLENT CONDITION!
|
|
Ad # 7376 | Vertical Machining Centers (VMC) |
2004 |
Bridgeport |
HCS-500 |
Excellent |
Sold |
Photo /
More Info. |
2004 Bridgeport HCS-500 CNC Vertical Machining Center: Heidenhain iTNC530 Control
Travels 19.7" x 15.7" x 15.7"
16 ATC
HSK E32 Taper
12HP
Spindle Oil Chiller
Cutter Air Blast
Linear Scales
Full Machine Specifications
Heidenhain iTNC530 Control
19.7" X 15.7" x 15.7" Travels
16 Tool Swing Arm ATC
HSK E32 Spindle
40,000 RPM
12 HP
Spindle Oil Chiller
Cutter Air Blast
Linear Scales |
|
Ad # 5356 | Vertical Machining Centers (VMC) |
1993 |
OKUMA |
MC-4VAE |
Excellent |
Sold |
Photo /
More Info. |
MC-4VAE OKUMA 3-axes CNC Vertical Machining Center w/20 ATC: Basic Information
Category
CNC Machining Centers
Sub-Category
Vertical
Manufacturer
OKUMA
Model
#MC-4VAE
Year
1993
Size
3-axes
Item # 4103 -- Full Description
#MC-4VAE OKUMA 3-axes CNC Vertical Machining Center with 20 ATC,new 1993
Table working surface 20.08” x 39.37”
Table load capacity 2,200 lbs.
Extended X-axes travel to 30”
Y-axis travel 16.14”
Z-axis travel 17.72”
Taper in spindle CAT-40
Rapid feed rates 591 IPM (X + Y), 512 IPM (Z)
Spindle speeds to 6,000 RPM
EQUIPPED WITH:
2 geared ranges
20 automatic toolchanger
Way covers
Flood coolant with splash guards
Worklight
10/ 7 ½ H.P. spindle drive
OKUMA OSP-5020 3-axes CNC control, swing pendant mount, color CRT, graphic display, floppy drive, animation, EC processor, hand held remote pulse generator, RS-232C port, 4M bubble memory
Wired for 3/60/480 volt operations
Condition: Very good
|
|
Ad # 15470 | Vertical Machining Centers (VMC) |
2006 |
Haas |
SMINIMILL |
Excellent |
SOLD |
Photo /
More Info. |
X axis 16" Y axis 12" Z axis 10": CNC Vertical Machining Center
Make: Haas
Model: SMINIMILL
Capacity: X axis 16" Y axis 12" Z axis
10"
Spindle Nose to Table (~ max)14 "356 mm
Spindle Nose to Table (~ min)4 "102 mm
Table:
Length36 "914 mm
Length (Work Area)28.75 "730 mm
Width12 "305 mm
T-Slot Width5/8 "16 mm
T-Slot Center Distance4.33 "110.0 mm
Number of Std T-Slots33
Max Weight on Table (evenly distributed)
500 lb227 kg
Max Rating15 hp11.2 kW
Max Speed10,000 rpm10 000 rpm
Max Torque17 ft-lb @ 4600 rpm23 Nm @
4600 rpm
Max Rating15 hp11.2 kW
Max Speed10,000 rpm10 000 rpm
Max Torque17 ft-lb @ 4600 rpm23 Nm @
4600 rpm
Max Rating 15 hp
Max Speed 10,000 rpm
Max Torque 17 ft-lb @ 4600 rpm
Drive SystemDirect Speed Belt Drive
TaperCT or BT 40
Rapids on X1200 in/mi
Rapids on Y1200 in/min
Rapids on Z1200 in/min
Max Cutting833 in/min
Tool Changer:
TypeCarousel
Capacity 10
Air Required4 scfm, 100 psi
Coolant Capacity40 gal
Machine Run Time:6365 hours as of 3/9/2017
|
|
Ad # 6598 | Vertical Machining Centers (VMC) |
2000 |
Kira |
VTC-40A |
Excellent |
sold |
Photo /
More Info. |
28" x 16" Kira Vertical Machining Center: Table: 27.5" x 15.7"
control: fanuc 21i-m
10 station tool changer
Travels:
X-23.6",
Y-15.7"
Z-15.7",
Spindle Taper: cat#40 Taper,
Spindle Speed: 10,000 RPM,
Rapid Feed Rates: 1900 IPM,
12 Position Turret Type tool changer,
Rigid Tapping up to 4,000 rpm,
high pressure coolant System
chip conveyor
|
|
Ad # 8238 | Vertical Machining Centers (VMC) |
1998 |
Yang |
MV5A |
Excellent |
Sold |
Photo /
More Info. |
71" x 32" Table Vertical Machining Center: CAT 50, 3500RPM Spindle
1800 x 820 Table
1300 x 750 x 750 Travels
Fanuc O-M Control
4th Axis Ready W/ Drives Rotary Not Included
30 Tool Arm-Type ATC
Full Enclosure
Coolant Thru Spindle PKG
Chip Conveyor & Bucket
Machine Can Be Demoed
Sold new for Approx $125,000 |
|
Ad # 9110 | Vertical Machining Centers (VMC) |
1994 |
Fadal |
VMC4020HT |
Excellent |
sold |
Photo /
More Info. |
402020: Item Number: MV993
FADAL VMC4020HT CNC VERTICAL MACHINING CENTER
EQUIPPED WITH:
- SERIAL: 9411348
- AGE: 1994
- MODEL: 906-1
- 21 ATC
- CAT 40
- 4TH AXIS PREWIRED
- RIGID TAPPING
- HIGH SPEED CPU
- COOLANT THROUGH SPINDLE
- INSPECT UNDER POWER
- TABLE SIZE: 20" X 43"
|
|
Ad # 13766 | Vertical Machining Centers (VMC) |
2006 |
Brother |
TC-32B QT |
Excellent |
sold |
Photo /
More Info. |
441 LBS: Brother CNCB00 CNC Control, Two Automatic Pallet
Transfer Unit, Fully Enclosed,
18 Tool Automatic Changer, Coolant Thru The
Spindle Ready, HSK Spindle Taper,
Chip Blaster D16-70-1 With Mist Blaster (1000
PSI), Helical Interpolation, Work Light,
Renishaw BC3 Non Contact Tool Setter, Manual
Pulse Generator, Spindle Speed Override,
2D & 3D Capability, RS232C & Ethernet, Coolant
Tank With Chip Shower, Levelling Pads,
Centralized Auto Lubrication System, All
Available Manuals, Very Low Hours, Like New,
Machine Is In Excellent Condition, Like New
Condition & Video Available Upon Request, |
|
Ad # 15257 | Vertical Machining Centers (VMC) |
2013 |
Haas |
VF-7/40 |
Excellent |
sold |
Photo /
More Info. |
: 2013 Haas VF-7/40 machining center
travels:84" x 32" x 30"
table:84" x 28"
main motor:20hp
max rpm:7500
atc: 24 station
spindle taper:cat40
std factory specs below-please verify actual machines
Vertical Machining Center; 84" x 32" x 30" (2134 x 813 x 762 mm), 40 taper, 20 hp (22.4 kW) vector drive, 8100 rpm, inline direct-drive, 24+1 side-mount tool changer, 600 ipm (15.2 m/min) rapids, automatic chip auger, programmable coolant nozzle, color remote jog handle, power-failure detection module, 1 GB program memory, 15" color LCD monitor, USB port, memory lock key switch, rigid tapping and 95-gallon (360 liter) flood coolant system.
Note updated info below
lots of tooling shown in pictures included except vises
options included:
4th axis drive wiring for brushless rotary tables
dual halogen lights
expanded memory 750MB
Probe calibration
internal isolation transformer 354-488Volts;235vac
Wireless intuative renishaw probing system
4AXD (4th Axis Drive & Rotary Table)
WIPS-R (Renishaw Wireless Intuitive Programming System)
HIL (High Intensity Lighting)
Expanded Memory (To 750 MB)
PC (Probe Calibration)
INTRN (Internal Transformer 354-488:235V)
Chip Auger
spindle on time hrs:2,194
motion on tome:2,212 hrs
servo on time: 7,464 hr |
|
Ad # 10038 | Vertical Machining Centers (VMC) |
2005 |
Amera Seiki |
A-3 |
Excellent |
Sold |
Photo /
More Info. |
Amera Seiki VMC 43x22x22: Fanuc 0iMB CNC control 43” X-axis travel 22” Y-axis travel 22”
Z-axis travel 20 HP (max rating) Fanuc AC spindle motor
12,000 rpm spindle speed 1417 ipm rapid traverse 24+1 tool
capacity Double arm, side mount tool changer CT-40 taper
320 meters memory 8.4” color LCD screen Full cover guarding
including top cover Coolant thru spindle, 350 psi Flood
coolant system Rigid tapping Spindle oil chiller Automatic
lubrication system Filtration system for coolant thru spindle
Pre-wired for 4th axis Remote manual pulse generator Built-
in work light Cycle stop alarm light Double doors with safety
interlock Auger type chip conveyor |
|
Ad # 12553 | Vertical Machining Centers (VMC) |
1997 |
Awea |
SP-3016 |
Excellent |
sold |
Photo /
More Info. |
3016: Fanuc O-M ctrl, 120.5"X axis, 63" Y, 30"Z, table load capacity 11,020Lbs.,R... |
|
Ad # 12556 | Vertical Machining Centers (VMC) |
2006 |
Benchman |
MX |
Excellent |
sold |
Photo /
More Info. |
6 "X 18" : Axis Travel
X Axis 12" or 18"
y Axis 7"
Z Axis 9.5"
Work Area
Table Size - 19.5"x6.25"
Table Load Cap. 150lbs. (68kg)
Threaded matrix 3/8"-16, 1" on center
Open Height 12"
Throat clearance 6.75"
Spindle Speed 7,200 RPM
Dimensions
Width: 34-48" (864-1219mm)
Height: 56.5" (914mm)
Depth: 48" (1219mm)
Weight: 400lbs (181kg)
Shipping Weight: 500-1000lbs (227-434kg)
Accessories: 11 lbs (5kg)
|
|
Ad # 9505 | Vertical Machining Centers (VMC) |
1996 |
Fadal |
VMC 3016 |
Excellent |
Sold |
Photo /
More Info. |
30" x16": Absolute cherry, owner operated since new, one man shop, nicest machine on ... |
|
Ad # 8486 | Vertical Machining Centers (VMC) |
1998 |
Brother |
TC-229N |
Excellent |
sold |
Photo /
More Info. |
: Brother TC229N Vertical Machining, Drilling and Tapping center. New 1998. ... |
|
Ad # 11753 | Vertical Machining Centers (VMC) |
1996 |
Fadal |
VMC4020 pallet changer |
Excellent |
sold |
Photo /
More Info. |
40" x 20": (1996)
FADAL VMC 4020 Dual Pallet
40 TAPER
TRAVEL & TABLE SIZE
X AXIS 40
Y AXIS 20
Z AXIS 22
30 ATC
FULL FOURTH AXIS W/INDEXER
RIGID TAPPING
PALLET CHANGER
10,000 RPM SPINDLE
150 PSI COOLANT THRU THE SPINDLE
CHIP CONVEYOR
|
|
Ad # 7450 | Vertical Machining Centers (VMC) |
2001 |
Mazak |
VTC 200C |
Excellent |
Sold |
Photo /
More Info. |
2001 Mazak VTC 200C CNC Vertical Machining Center: Fusion 640M Control
CT 40
10,000 RPM
65" x 20" x 20" Travel
20 HP
For Kitagawa 4th Axis
Chick Tombstome
3 Jurt Vises
Full Machine Specifications
Table Size 78.74" x 20.08"
Table Load Capacity 2,200 Lbs
(Load Uniformly Distributed)
Floor Space (Without Chip Conveyor) 161.42" x 115.31"
Floor Space (With Chip Conveyor) 225.7" x 115.31"
Machine Height From Machine Base 108.5" Approx
Total Power Required Machine Only 32.7 KVA
Note: Machine Arranged for 460 Volts 60 Hz
(Unless otherwise specify)
Air Requirements 70-130 PSI 5cfm
Machine Weight 16,000 lbs
X Axis Travels 65.35"
Y Axis Travels 20.08"
Z Axis Travels 20.08"
Distance from Spindle to Table Top 7.09"min/27.17" max
Distance from Spindle C/L to Column 21.65"
Table Height 29.53"
Spindle Nose CAT 40
Spindle Speed 40-10,000 RPM
Spindle Acceleration time (0-12,000 RPM) 1.8 sec
Number of Spindle Ranges 2 (Delta Star)
Spindle Horsepower 20 HP
Obtain Full HP @ (30 min) 3,300 RPM
Spindle Cooling System Chiller Coil/Fan
Type of Servo Drives Digital AC Motor
X Axis Rapid Traverse 1181 IPM
Y Axis Rapid Traverse 1181 IPM
Z Axis Rapid Traverse 1181 IPM
Servo Magazine Capacity 24 Tools
Chip to Chip Tool Change Time 4.7 sec
Tool to Tool Tool Change Time 1.5 sec
Method of Tool Selection Random
Max Tool Dia w/All Pockets Full 3.14" (2.75"w/48T)
Max Tool Dia w/Adjacent Pockets Empty 4.33:"
Max Tool Length 13.78"
Max Tool Weight 17.6 lbs
Kitagawa 4th axis RS160
3 Kurt Vises
New Spindle Dec 2006
Renishaw TS-27R Toolsetter
1 Shift Shop |
|
Ad # 9297 | Vertical Machining Centers (VMC) |
2007 |
Haas |
VF3 |
Excellent |
sold |
Photo /
More Info. |
40 x 20 x 25: 40 x 20 x 25 travels
Low hours-500 spindle run hrs
chip auger,
High speed machining,
34 tool holders, 2 vises can see with tooling or without |
|
Ad # 7387 | Vertical Machining Centers (VMC) |
2000 |
Fadal |
6030-HT |
Excellent |
Sold |
Photo /
More Info. |
2000 Fadal 6030-HT CNC Vertical Machining Center: 10000 RPM
BT 40
60x30x30 Travel
30 Side MT ATC
Rigid Tap
4th Wire
Coolant Through Spindle
High Torq
4 mb
Fadal Multi Processor Control
Full Machine Specifications
Fadal Multi Processor CNC
4M Memory
Table 62.5" x 30"
Trvels 60" x 30" x 30"
Spindle Speed 10,000 RPM
Spindle Taper BT 40
30 Tool Servo Turret
Very High Torque
Rigid tapping
Box Way Package
4th Axis Servo Control (does not included 4th Axis)
Coolant Through the Spindle
Remote Pulse Generator |
|
Ad # 14318 | Vertical Machining Centers (VMC) |
2001 |
Atrump |
B5AC-184 |
Excellent |
sold |
Photo /
More Info. |
34" X 20": Specifications
ITEMB5AC-W
Work Table1042mm x 406mm (41" x 16")
Table T-slots (WxN)18mm x4 (0.71")x4
Table load max.450 kgs (992 lbs) (center)
X-axis travel861mm (33.9")
Y-axis travel508mm (20")
Z-axis travel610mm (24")
Spindle nose to table surface120 ~ 730mm (4.7" ~ 28.7")
Spindle center to column550mm (21.6")
Table surface to floor830mm (32.7")
Spindle taperCAT #40 (or BT #40 -- OPT.)
Spindle speed6000 R.P.M.
Spindle motor10 HP (5.5 / 7.5 Kw)
Axis motor1 Kw
ATC TypeArmless type
Coolant pump motor1/2 HP
Cutting feed3 M/min (118 ipm)
Rapid feed4 M/min (158 ipm)
Max. tool diameterØ 100mm (Ø 3.94")
Max. tool length275mm (10.8")
Max. tool weight6.5kgs (14 lbs)
Weight (Approx.)2000 kgs (4410 lbs)
|
|
Ad # 10031 | Vertical Machining Centers (VMC) |
2008 |
2008 Leadwell V-40 CNC Ve |
2008 Leadwell V-40 CNC Vertica |
Excellent |
sold |
Photo /
More Info. |
: Table Size47.2" x 19.7"
Table Load Capacity1100 lbs.
X Axis Travel40.2"
Y Axis Travel20"
Z Axis Travel20.1"
Spindle Nose to Table6.3” - 26.3”
Spindle Motor12 HP
Spindle Speed10,000 RPM
Spindle Taper40
Rapid Traverse Rate (X & Y / Z)787 IPM / 590 IPM
No. of Tool24 ATC
Maximum Tool Diameter / Adj. Empty3.15” / 4.3”
Maximum Tool Weight15.4 lbs.
Approx. Dimensions102" x 117" x 99”
Weight13,200 lbs.
Equipped With:
Fanuc Oi-MC
24 ATC ARM Type10,000 RPM Spindle
Linear WaysRS232 interface
Rigid tappingFully enclosure guarding
Dual Chip AugersWork light
Coolant system including coolant tankLubrication
system
Mfg 12/2007 - Installed New in 2008 Manuals |
|
Ad # 3563 | Vertical Machining Centers (VMC) |
2004 |
Milltronics |
RW-30 |
Excellent |
Sold |
Photo /
More Info. |
Full 5-Axis 60" x 30" VMC - Incl. 5-Axis Tables: X,Y,Z = 60 x 30 x 26
Table = 63 x 23.5
Table Capacity = 6,000 lbs
Spindle Range = 25 - 4,500 rpm
Spindle HP = 30/25 hp
Spindle Bearing Diameter: = 100 mm
Standard Features:
·Fully Hardened and Ground Box Ways with Turcite Surfaces and Precision Ground Ball Screws
·PC-based CPU includes 6 Mb DiskOnChip® Parts Storage Memory Non-volatile motionless disk
·12" LCD Active Matrix Color Display with Discrete Keys
·8 Mb Virtual Disk / RS-232 with DNC Buffer and Large Program Management Software
·1300 Block/Sec High Speed Processor
·Conversational plus G & M Code Programming with 3-D Part & Tool Path Graphics
·Engraving, Helical Interpolation, Auto Routines, and User-definable Macros with Trig Assist
·Coordinate Rotating, Scaling, Mirror Image, Thread Mill and Non-Descript Pocket Clear Cycle
·Five Axes Simultaneous Interpolation Software and Interface Servos separate
·Auxiliary Keyboard Port for PC Keyboard
·Automatic Axes Thrust Bearing Lubrication
·Automatic Metered Lubrication w/Low Lube Fault
·Spare “M” Function and CNC “Wait” Channel
·Operator's Station Electronic Handwheel plus Handwheel Controlled Program Execution
·1.44 Mb Floppy Drive
·High Torque AC Digital Servo Drives
·Spindle Taper Air Blow Out
·Two Speed High Torque Closed Loop Spindle Drive RW30 has 30/25 HP (22/18 kW)
·Spindle Load Meter
·Work Lamps
·Full Metal Enclosure
·Automatic Home Sequence with Home Switches
·Spindle Chiller standard on RW30
·#50 4500 RPM Spindle Cartridge on RW30
·Metal Way Covers in Front and Rear of Saddle and Column
·Outrigger Linear Ways on RW30
·ARM Type ATC: 32 Stations
·High Pressure Flood Coolant System with Dual Nozzles
·Tool Release Button·LCD Hour Meter
·Air Blast Hose
·Chip Drawer Chip Removal System
·Wash Down Hose
·Most Software Upgrades Included in Base Price
·All Axes Laser Were Calibrated and Ballbar Inspected when new
|
|
Ad # 15627 | Vertical Machining Centers (VMC) |
2015 |
Mazak |
Universal 500C |
Excellent |
sold |
Photo /
More Info. |
500mm x 1000 mm: 2015 madam 500c universal
Low hours
Mazatrol Smart Control
Includes Chip Elevator and
assortment of
tooling
MAZATROL Smart Control
10.4” Colro SCD
EIA/ISO code input functions
USB I/F Compact Flash Reader
Absolute Encoder System
19.68” X 39.37” (500mm x 1000mm)
table w/ taped
holes
20 Tool magazine (CAT 40)
Main spindle motor AC 20 HP
Spindle Speed 10000 RPM (CAT 40)
Renishaw OTS-AA Optical tool
setter
Through spindle cooling
Manuals
|
|
Ad # 14962 | Vertical Machining Centers (VMC) |
2007 |
Hurco |
VMX-50/50 |
Excellent |
sold |
Photo /
More Info. |
50 in x 26 in x 24 in: Specifications:
Table Size59" x 26" (3,000 lbs. Cap)
"X" Axis Travel50"
"Y" Axis Travel26"
"Z" Axis Travel24"
Rapid Traverse Rate (X&Y/Z)1,181 / 787
ipm
Spindle Speed10,000 rpm
Spindle Motor24 hp.
Spindle TaperCT 50
Automatic Tool Changer24 Stations
Electrical Requirements240V/3Ph/60Hz
Floor Dimensions10' x 8' x 9'
Machine Weight19,200 lbs
Equipped With:
Chip Conveyor
Rigid Tap
3D Mold
All Available Manuals
Video: https://www.youtube.com/watch?
v=nrCey0ISGfI&feature=youtu.be
|
|
Ad # 11394 | Vertical Machining Centers (VMC) |
1995 |
FADAL |
VMC-15 |
Excellent |
sold |
Photo /
More Info. |
X=20", Y=16", Z=20": Fadal 88HS CNC, X=20", Y=16", Z=20", CAT 40,
FADAL CNC VERTICAL MACHINING CENTER
Model VMC-15, S/N 9510021, New 1996
EQUIPPED WITH:
Fadal 88HS CNC Control, RS-232 Port, Multiple Part Program Storage,
Self Diagnostics, 21 Station Automatic Tool Changer, Axis Error
Compensation, Full Enclosure, Coolant System and Chip Pan.
CATALOGUE SPECIFICATIONS:
Table Working Surface................................. 29.5" x 16"
Table Load Capacity................................... 2,000 LBS
Longitudinal Travel (X-Axis).......................... 20"
Cross Travel (Y-Axis)................................. 16"
Vertical Travel (Z-Axis).............................. 20"
Spindle Nose to Table................................. 4" - 24"
Rapid Traverse Rate (X & Y-Axes)...................... 400 IPM
Rapid Traverse Rate (Z-Axis).......................... 400 IPM
Tool Storage Capacity................................. 21
Spindle Horsepower.................................... 10 HP
Spindle Speeds Range.................................. 10- 7,500 RPM
Spindle Taper......................................... #40 Cat
Electrics.............................................
Approximate Machine Dimensions........................ 87" x 106"
Approximate Machine Height............................ 95"
Approximate Machine Weight............................ 8,000 LBS
CONDITION: Machine has Cut Primarily Plastic and Appears to be in
Excellent Condition !
|
|
Ad # 12347 | Vertical Machining Centers (VMC) |
1990 |
HAAS |
VF1 |
Excellent |
sold |
Photo /
More Info. |
: VF1 1990 I ALSO HAVE A VF2 1993
BOTH MACHINES ARE UNDER POWER AND WORK FINE EVERYTHING HAS BEEN TEST COMES WITH A KURT VISE
12- 40 TAPER TOOL HOLDER
|
|
Ad # 6791 | Vertical Machining Centers (VMC) |
2001 |
Miltronics |
RW-30 |
Excellent |
sold |
Photo /
More Info. |
2001 Miltronics RW-30: 2001 Miltronics RW-30
Travels 60" x 30" x 26"
CAT 50
4,5000 RPM
40 HP
32 ATC
Spindle Chiller
Rigid Tap
3.5" Floppy Drive |
|
Ad # 7384 | Vertical Machining Centers (VMC) |
2001 |
Enshu |
EV-450-Y |
Excellent |
Sold |
Photo /
More Info. |
2001 Enshu EV-450-Y CNC Vertical Machining Center: Travels 22" x 17" x 18"
10,000 RPM
CAT 40
15 HP
Yasnac J300 Control
Full Machine Specifications
Travels 22" x 17" x 18"
20 ATC
10,000 RPM
CAT 40
Yasnac J300 Control
10 HP
Renishaw Probe
5 Axis
Rotary Table |
|
Ad # 7389 | Vertical Machining Centers (VMC) |
2002 |
Fidia |
HS644 |
Excellent |
Sold |
Photo /
More Info. |
2002 Fidia HS644 CNC Vertical Machining Center: HSM
22,000 RPM
Full 4th Axis
HSK 50 Spindle
Under 1000 Hours
Travels 24" x 18" x 16"
Approx 10 Holders
Scoht Rotary Table
Fidia C20 Control
Tool Probe
20 ATC
Full Machine Specifications
High Speed VMC
22,000 RPM
Full 4th Axis
20 Tools
HSK 50 Spindle
Under 1000 Hours
Travels 24" x 18" x 16"
Approx 10 Holders,
Fida C 20 Control
Tool Probe |
|
Ad # 14476 | Vertical Machining Centers (VMC) |
90's |
Victor |
Fortune Vcenter-65 |
Excellent |
sold |
Photo /
More Info. |
660 lb. max table load: Victor (Fortune) Model V Center-65 Vertical
Machining Center
35-1/4" x 16" T-Slotted Table
25.6" X-Travel
16.14" Y-Travel, 20.08" Z-Travel
Cat 40 Spindle Taper
24-Position ATC
660 lb Max Table Load
13.2 lb Max Tool Weight
60-6,000 RPM
Fanuc Series O-M CNC Controls
Coolant Tank and Pump
RS232 Port
7.4 hp
220 Volt, 3-Phase
MINOR TECHNICAL ISSUES WITH LIMIT SWITCH |
|
Ad # 12348 | Vertical Machining Centers (VMC) |
|
SHIZUOKA |
B-5V |
Excellent |
sold |
Photo /
More Info. |
: SHIZUOKA 30-POSITION VERT. MILLING MACHINESHIZUOKA 30-POSITION VERT. MILLIN... |
|
Ad # 11145 | Vertical Machining Centers (VMC) |
2006 |
HAAS |
Mini-Mill |
Excellent |
Sold |
Photo /
More Info. |
700 lbs: X, Y, Z TRAVELS= 16", 12", 10"
7.5 hp SPINDLE, 6000 RPM
RIGID TAPPING
PROGRAMMABLE COOLANT NOZZLES
RENISHAW TOOL PROBE WITH TOOL SET
CLEAR PLASTIC TOP COVER
WIRED FOR 4th AXIS
WORK LIGHT
RS 232 INPUT
FLOPPY DRIVE
COOLANT TANK BUILT INTO BASE
10 tool Carousel ATC |
|
Ad # 15141 | Vertical Machining Centers (VMC) |
2002 |
Johnford |
Sv-32 |
Excellent |
sold |
Photo /
More Info. |
20" X 40": Johnford SV32 2002
Manufacturer: Johnford
Model: SV32
Year: 2002
Control: FANUC 18M
Specifications
Table Working Surface 39.4″ x 19.7″
Longitudinal Travel X 31.5″
Cross Travel Y 19.7″
Vertical Travel Z 24″
Spindle Nose to Table 3.94 ~ 28″
Spindle Center to Column 21.7″
Spindle Taper CAT #40
Spindle Diameter 2.56″
Spindle Speed No. 40 60-8,000 RPM
Spindle Motor 10/7.5 HP P motor
X-Y-Z Rapid Traverse 30-30-20 M/min
Cutting Feed 1-8,000 mm/min
Coolant Pump Motor 2.1 HP
Tool Selection Bi-direction random type,
shortest path
No. of Tools 24
Adjacent pickets max tool dia. 3″
Max Tool Diameter 4″
Max Tool Length 7.8″
Max Tool Weight 22 lbs
Table load capacity 880 lbs
Video Link: www.youtube.com/watch?
v=X3sCHdaR64I |
|
Ad # 13397 | Vertical Machining Centers (VMC) |
2009 |
Chiron |
FZ-08KS |
Excellent |
sold |
Photo /
More Info. |
5-Axis: Chiron FZ08K S Magnum 5-Axis Bar-fed Vertical
Machining Center With NC Swivel Head 2009 Vintage
Chiron Magnum Vertical CNC Machining Center with
NC Swivel Head Machine is Comparable to Willemin
(Mill/Turn) Column Moving machining center with
Fixed Table CAN BE SET UP FOR BAR FEEDING CNC
Control: Fanuc 18iMB5 5-axis CNC Control
simultaneous machining (details below) Motor at
100%: 9.4 HP (7kW) Motor at 25%: 18.8HP (14kW)
Main Spindle Speeds: 0-30,000 RPM Turning Spindle
speeds: 15 - 8,000 RPM * *Barfeed Interface
included (originally interfaced for an LNS bar
feed) NC Swivel Head: -20 / +115 deg Rapid
traverse: 60 RPM Increments: 0.0001 deg with
direct measuring system: +/- 5" Swivel Head Speed:
0.5 seconds to swivel from 0-90deg Travels: X-
axis: 450mm (17.7") Y-axis: 270mm (10.6") Z-AXIS:
310MM (12.2") Drilling capacity in steel 60: 0.47"
(12mm) Tapping capacity: 0.31" (M8) Milling
capacity in steel 60: 1.893 ci/min (30 cm3/min)
Automatic Tool Changer: 40 tools Tool Shank: HSK-A
40 DIN 69893 Max tool Dia: 1.97"(adj. magazine pos
are full) Max tool Dia: 3.94"(adj. magazine
position open) Tool length: 6.3" (160mm) Max tool
weight: 2.6 lbs Tool Change time: 0.8 sec Chip-to-
chip time: 1.9 sec Lathe spindle capacity (water
cooled): 32mm (1.25") Motor: 4kW @ 100% / 8.5kW @
15% Spindle speeds: 15-8,000 rpm with direct
measuring system and pneumatic clamping Collet
Chuck 12kN with integrated pneumatic actuation NC-
feeding unit as bar feeder rapid traver: 60m/min
stroke: 460mm, depending on fixture Fixed Table
with chip pan clamping sur: 30.3" x 11.4" (770 x
290 MM) with thread and locating hole grids: M16 x
diameter 15 H7 x 50mm Table Load Cap: 1100 lbs
(500kg) Fanuc 18iMB5 5-axis simultaneous CNC
Control A-1 Nano High-Speed Contouring 32 tool
off-sets Macro B Sub-routines Machine: 108" x 72"
x 95" 7,500 lbs Chip Conveyor: 84" x 34" x 30"
1,500 lbs |
|
Ad # 7449 | Vertical Machining Centers (VMC) |
2002 |
Mazak |
Variaxis 630 |
Excellent |
Sold |
Photo /
More Info. |
2002 Mazak Variaxis 630 CNC Vertical Machining Center: Fusion 640
2 Pallet Changer
12,000 RPM
80 Station ATC
High Pressure Coolant Thru Spindle
24" X 30" X 20" Travels
Chip Conveyor
Full Machine Specifications
Table Size (2 P.C.) 19.69" x 19.69"
X-Axis Travels 24.80"
Y-Axis Travels 30.12"
Z-Axis Travels 20.08"
A-Axis Travels 120 deg.- +30 deg.
C-Axis Travels 360,000 degrees
Distance Spindle Nose/Table Top 9.06" - 29.13"
Maximum Table Load 1,102 lbs.
Maximum Workpiece Size 24.8" diameter
Maximum Workpiece Height 19.69"
Spindle Nose #40
Spindle Horsepower (Cont/30 Min) 30/20 HP
Spindle RPM 12,000
Spindle Speed Increment 1RPM
Number of Ranges 1
Tool Clamping Force 2,734 ft. /lbs.
Spindle Bearings Front(Number/Type) Ang.Contract Ball
Spindle Cooling System Radiator/Fan Cool
Magazine Capacity 80
Tool-To-Tool Time 9 seconds
Chip-To-Chip Time 3.6 seconds
Maximum Tool Diameter 3.15"
Max. Tool Dia. w/Adj. Pockets Empty 4.92"
Maximum Tool Length 14.17"
Maximum Tool Weight 18 lbs.
Rapid Traverse Rate (X,Y,Z Axis) 1,969 IPM
Floor Space Required 94.5" x 161"
Machine Height from Bottom of Base 130.3"
Machine Weight (2 P.C.) 29,754 lbs.
Includes:
PMC Preparation
Side Exit Chip Conveyor with filtering drum
High Pressure Coolant 1000PSI
Workpiece Washing Sysytem |
|
Ad # 5099 | Vertical Machining Centers (VMC) |
1994 |
Kitamura |
Mycenter 3X |
Excellent |
Sold |
Photo /
More Info. |
Very Nice Vert. Mach. Center: SPECIFICATIONS
SPINDLE RPM, LOW ---------------------------- 50 - 2300 RPM
HIGH --------------------------- 2301 - 10000 RPM
TOOL STATIONS ------------------------------- 20
TOOL TAPER ---------------------------------- CT-40
TRAVELS
X-AXIS ------------------------------------ 30"/900 IPM
Y-AXIS ------------------------------------ 18"/900 IPM
Z-AXIS ------------------------------------ 18.2"/700 IPM
SPINDLE MOTOR HP ---------------------------- 10/14-3/4 HP
TABLE DIMENSIONS ---------------------------- 35" x 16"
TABLE LOAD CAPACITY ------------------------- 1100 LBS.
MACHINE DIMENSIONS -------------------------- 9'8"W x 8'L x
10'T
MACHINE WEIGHT ------------------------------ 12,000 LBS.
--------------------------------------------------------------------------------
FEATURES
FLOOD COOLANT
YASNAC I-80 CNC CONTROLS
RIGID TAPPING
HIGH SPEED DOUBLE ARM AUTOMATIC TOOL CHANGER
HI/LOW GEARED HEAD
--------------------------------------------------------------------------------
EQUIPPED WITH
- 4TH AXIS CAPABILITIES
- WORK LIGHT
- FULL ENCLOSURE
- COOLANT TANK
- CENTRAL WAY LUBE SYSTEM
- NSK SPINDLE LUBE SYSTEM
--------------------------------------------------------------------------------
NOTE
SPECIFICATIONS SUBJECT TO VERIFICATION
NOTE: HAS ONLY RUN PLASTIC & ALUMINUM
|
|
Ad # 11878 | Vertical Machining Centers (VMC) |
99 |
Chevalier |
2040 VMC |
Excellent |
Sold |
Photo /
More Info. |
20" x 40" : Chevalier 2040 VMC
Control: Fanuc 0-MD
Travels 40" X 20" Y 20" Z
RAPID TRAVERSE RATE X, Y & Z AXES 590/590/472 IPM
CUTTING FEED RATE 0.04 - 300 IPM
SPINDLE TAPER CAT 40
SPINDLE SPEEDS 60 - 6000 RPM
SPINDLE MOTOR 15 HP
TOOL CHANGER CAPACITY 20 POSITION ATC
MAXIMUM TOOL WEIGHT 15 LBS
MACHINE WEIGHT, APPROX. 11,000 LBS
MACHINE DIMENSIONS, APPROX. 107" x 91" x 99"
|
|
Ad # 5175 | Vertical Machining Centers (VMC) |
2000 |
MAZAK |
FJV 35/60 |
Excellent |
sold |
No Photo /
More Info. |
: In ideal condition, hardly used
Travels
X axis travel: 1600 mm
Y axis travel: 800 mm
Z axis travel: 585 mm
Max. table load: 1600 kg
Workpiece dimensions: 1740mm x 860mm x 640mm
Spindle:
Spindle power: 30 kW
Spindle speed: 1-6000 rpm
Spindle nose to table min. distance: 200mm
Tool shank: ISO 50 ,DIN 69871/A
Tools magazine
Number of stations: 30
Max. tool diameter: 125mm
Max tool length: 380 mm
Rapid traverse: 1-32000 mm/min
NUMERIC CONTROL CN MAZATROL 640M PC-FUSION CNC
|
|
Ad # 14376 | Vertical Machining Centers (VMC) |
2008 |
Sharp |
SV 2412 |
Excellent |
sold |
Photo /
More Info. |
X 24" x Y 12" x Z18": Used Sharp SV 2412 CNC Mill in very good
condition.
•The Entire Machine Base is Built from One
Piece Cast Iron, which Provides up to Ten Times
the Dampening Capacity of Welded Steel
•Induction Hardened and Precision Ground
Box Ways, with Matching Surface Coated with
TURCITE
•Precision Ground Table
•2 Nozzles at each side of Base Flush away
Chips
•Flexo-Metal Way Covers at each side of
Table Fully Protects the Table Ways and
Ballscrew
•Roll-Out Coolant Tank
•Three Pull-Out Chip Drawers for Easy
Cleaning
Less than 3000 Hrs under power and about
800hrs operating and cutting time on clock.
Specifications:
-7.5/10hp Fanuc Spindle Motor
-8,000 RPM High Performance Spindle
-Travel X,Y,Z - axis 24 12 18
-Box Way Construction
-Fanuc OiMate Mc Control
-400 Work Offsets
-48 Work Coordinates
-400 Registered Part Program Storage
-Fanuc Macro
-Fanuc High Speed Skip Function
-Spare Function (4)
-Fanuc (Auto Measure System) XYZ
-Memory Card Reader in Front
-Remote Jog Handle
-Fanuc Monochrome LCD Screen
-Fanuc Digital Drive System
-10 Pocket Automatic Tool Changer-Umbrella
Type.
-SMART Automatic Lubrication System
-Coolant System w/adjustable nozzles (3)
-Large 42 Gallon Roll Out Coolant Tank
-(Nice) Chip Flushing Nozzles at Both Sides
of Chip Pan
-Belt and Auger Conveyor
-Rigid Tap
-Full Metal Enclosure w/Removable Side
doors
-Manual Guide Computer Assist Program
-Certified MEEHANITE castings ( Nice) Heavy
and Strong
-Induction Hardened and Precision Ground
Box Ways (XYZ)
-C-3 Grade Precision Ball Screw
-Halogen Work Light
SPINDLE
-Taper Cat 40
-Spindle Motor 7.5/10 HP
-Spindle Speed 8,000 RPM
-Standard Torque 51 ft lb @ 1,200 RPM
-Automatic Tool Changer
-Tool Capacity 10 Tools- ATC Type Umbrella.
-Max tool weight 17 Lbs
-Selection Method BI-DIRECTIONAL
-Tool Change time 6.5 seconds
FEED RATES
-Rapid Traverse (All 3 Axis) 1181 IPM
(30M/Min)
-Cutting Feed Rate (Max) 393 IPM (10M/Min)
-Axis Motor (X,Y,Z,) 2.4,2.4,3.4 HP
Max Thrust Rating X & Y Axis Motor 3500 lb
Max Thrust Rating Z Axis Motor 5,150 lb
Ball Screw Diameter & Pitch ( X,Y,Z,) 32mm
x 10mm
ACCURACY
-Positioning +/- .0001 (0.003mm)
-Repeatability +/- .0001 (0.003mm)
MISCELLANOUS
-Approximate Weight 6100 lbs
-Dimensions of Machine 73 x 74 x 92.5 (
Even if you use auger conveyor)
Belt Conveyor 121 x 74 x
92.5
-POWER REQUIREMENTS 220V/3 Phase/ 60 Hz .
15 KVA
Air Requirements 5 CFM @ 100 PSI
-Door Opening 26.8
|
|
Ad # 10286 | Vertical Machining Centers (VMC) |
2001 |
Fadal |
4020HT |
Excellent |
sold |
Photo /
More Info. |
4020: MACHINE IS COMPLETELY REBUILT AND COMES
WITH 3 MONTH PARTS WARRANTY.
Specifications:
X-Axis: 40"
Y-Axis: 20"
Z-Axis: 20"
Table Size: 48" x 20"
Taper: CAT 40
Spindle Speed: 10,000 RPM
Spindle Drive: 15 HP
ATC: 21
Equipped With:
Fadal MultiProcessor CNC Control
High Torque
Servo Turret
Rigid Tapping
AC Motors
Cool Power
RS232 Port
900ipm Rapid Traverse Rate
Coolant Tank with Pump
Manuals |
|
Ad # 7400 | Vertical Machining Centers (VMC) |
2006 |
Haas |
VF-4 SS APC |
Excellent |
Sold |
Photo /
More Info. |
2006 Haas VF-4 SS APC CNC Vertical Machining Center: Pallet Changer
Auger
P-Cool
16 Meg
HSM
30 HP
Ethernet
TSC
12,000 RPM
24 ATC
VCQ
4th Wire
Floppy
50" x 26" x 25" Travel
Full Machine Specifications
Travels 50" x 20" x 25"
Table 52" x 18"
Max Table Weight 1,750 Lb
Inline Direct Drive
X, Y, Z Axis Rapids 1400 IPM
Software: 1403C
Auger
P-Cool
16 Meg Memory
Rotate & Scale
High Speed Machining
Remote Jog
CAT 40
Floppy
Spindle Orient
4th Wire
Visual Quickcode
80 Gallon Coolant
AD Ethernet
Power Failure Module
TSC
12,000 RPM
24 ATC Side MT
Brushless
Rigid Tap |
|
Ad # 7452 | Vertical Machining Centers (VMC) |
1999 |
Mighty Viper |
V-500-P |
Excellent |
Sold |
Photo /
More Info. |
1999 Mighty Viper V-500-P CNC Vertical Machining Center: Mits M520 Control
20” x 16” x 24” Travels
CAT 40
8,000 RPM
16 ATC
10 HP
RS-232 Port
High Speed Rigid Tap
Box Way
4th Axis Interface
Oil Chiller
Full Machine Specifications
X-Axis 20"
Y-Axis 16"
Z-Axis 24"
Table Work Surface 32" x 15.5"
Table Work Load Capacity 750 LBS
Spindle Horse Power 10HP
Spindle Speeds 30-8,000 RPM
Spindle Taper CAT40
Feed Rates X & Y 0.1 to 276 IPM
Feed Rates Z 0.1 to 276 IPM
Rapid Traverse X, Y 708 IPM
Rapid Traverse Rates Z 630 IPM
Tool Storage Capacity 16
Equipped With:
RS 232 Port
4th Axis Interface
Spindle Oil Chiller
Heavy Duty Box Way
High Speed Rigid Tapping
16 Station ATC
Chip & Coolant System |
|
Ad # 7406 | Vertical Machining Centers (VMC) |
2004 |
Hardinge |
VMC 1500II |
Excellent |
Sold |
Photo /
More Info. |
2004 Hardinge VMC 1500II CNC Vertical Machining Center: Fanuc OI-MB control
travels 60x26x25
8000 RPM
22 HP
BT 40
Rigid tap
Twin-20 ATCs
Thru-spindle Coolant
Tool Probe
Full Machine Specifications
Fanuc Series OI-MB Controller
Worktable Size: X =63.93, Y = 26.00
Workpiece and Fixturing Capacity: 3,000 lbs
Travel Distance: X = 60.00, Y = 26.00, Z = 25.00
T-Slots: Width and # of slots (.708/18 mm x5)
Center Distance Pitch 4.92/125mm
8,000 RPM Spindle with 2 Speed Planetary Style ZF Gearbox
22 HP
Twin 20 Tool ATC Carousel
Rigid Tap
BT 40 Taper Size
Tool Probe |
|
Ad # 15256 | Vertical Machining Centers (VMC) |
2009 |
Haas |
VF-4B |
Excellent |
sold |
Photo /
More Info. |
Travels XYZ: 50” x 20” x 25”: 2009 Haas VF-4B machining center
Spindle speed :10,000 rpm max
main motor 30/HP: 2 speed drive
thru spindle coolant
Cat 40 taper
Tool changer: 40 station side arm style
lots of tooling holders included
Std mfg specs below-please verify actual
machines
Z-Axis Travel Bed:21'' - 25'' Make: HAAS
Highest Spindle Speed (RPM):10,000
Spindle Horsepower: 30
Table Length:40"- 59.9"
X-Axis Travel Bed:41"- 60"
Table Width:15'' - 19.9''
Y-Axis Travel Bed: 16'' - 20''
Travels XYZ: 50” x 20” x 25”
Rapid Traverse: 1000 IPM
Table Size: 52” x 18”
Equipped with:please verify below
Rigid Tapping
Coordinate Rotation
Intuitive Programming System Macro
Remote Jog Handle
Coolant Tank
Programmable Coolant
Vertical Machining Center; 50" x 20" x 25" (1270 x 508 x 635 mm), 40 taper, 30 hp (22.4 kW) vector drive, 8100 rpm, inline direct-drive, 20-station carousel tool changer, 1000 ipm (25.4 m/min) rapids, power-failure detection module, 1 GB program memory, 15" color LCD monitor, USB port, memory lock keyswitch, rigid tapping and 55-gallon (208 liter) flood coolant system. |
|
Ad # 7034 | Vertical Machining Centers (VMC) |
1990 |
Leblond Makino |
FNC-106/A30 |
Excellent |
Sold |
Photo /
More Info. |
Leblond Makino CNC Vertical Machining Center Model FNC-106/A30: Leblond Makino CNC Vertical Machining Center
Model FNC-106/A30
Specification Description
Table Dimensions: 23.5" x 55"
X Travel: 41"
Y Travel: 23.5"
Z Travel: 22"
Taper: #50
Spindle Speeds: 3500 RPM
ATC: 30
Equipped With:
Fanuc OM-B CNC Pendant Control |
|
Ad # 13346 | Vertical Machining Centers (VMC) |
2005 |
Fadal |
VMC 4020 |
Excellent |
sold |
Photo /
More Info. |
20" x 48": Fadal VMC 4020
Control Fanuc Series 18i MB5
Cool Power
Voltage 220/3
box way machine
TABLE SIZE 48” x 20”
T-SLOTS (NO. x WIDTH x SPAN) 5 x .709” x 3.75”
CUTTING FEED RATE (X/Y/Z) 600 ipm max
RAPID TRAVEL RATE (X/Y/Z) 900 ipm X/Y, 700 Z
MAX. WEIGHT ON TABLE 3,641 lbs.C
BALL SCREW SIZE 40 mm Dia. X/Y/Z
LONGITUDINAL (X AXIS) 40”
CROSS (Y AXIS) 20”
VERTICAL (Z AXIS) 20” (Optional 28”)
SPINDLE NOSE TO TABLE 4”-24” (4”-32” with Z
Option)
SPINDLE CENTER TO COLUMN WAYS 20
ATC, NUMBER OF TOOLS 24
ATC, TOOL SELECTION Random / Bi-directional
MAX. TOOL DIAMETER 3”
(WITHOUT ADJACENT TOOLS) 6” (4.5 w/30 Tools)
MAX. TOOL LENGTH 15”
MAX. TOOL WEIGHT 15 lbs.
Rigid Taping
Note: rigging fee 1200.00 adder |
|
Ad # 13556 | Vertical Machining Centers (VMC) |
1996 |
Leblond Makino |
FNC 125 LA-24 |
Excellent |
sold |
Photo /
More Info. |
9405" X 27.5" table size: FNC 125 LA-24, CNC Vertical Mill, 3 Axis
Leblond-Makino FNC 125 LA-24
Control:Fanuc OMC
TABLE:
- Table Length: 94.5"
- Width: 27.5"
- Max Table Load:
TRAVELS:
- X-Cross/Long: 80"
- Y-Saddle: 27.5"
- Z-Spindle/Vert: 27.5"
- Distance Spindle Nose to Table Surface (min):
9-3/4"
FEED RATES:
- Rapid Rate: 300 IPM
- Cutting Rate: 0 - 150 IPM
SPINDLE:
- Speed Min. - Max. RPM: 0 - 3500 RPM
- Motor HP (30 Min.): 15 HP
- Taper: CAT 50
Full machine rebuild in 1996
Equipped With:
24 Position Tool Magazine
4th Axis Ready
Helical Interpolation
Thread Cutting
99 Tool Offset Pairs
120 MByte Program Storage
I/O Interface (RS-232 Port)
Oilmatic
Comments:
Machine rebuilt in 1996 by Leblond Factory
authorized rebuilder:
New GE Fanuc OMC Control with CRT
New Ball Screws
Rebuilt DC Spindle Drive Motor and New Spindle
Drive Controller
Rebuilt DC Axis Drive Motors
Rescraped Ways
Reground Table Surface
All New Hydraulic Lines |
|
Ad # 5176 | Vertical Machining Centers (VMC) |
2000 |
Mazak |
FJV 35/80 |
Excellent |
sold |
No Photo /
More Info. |
80' x 32" Mazak FJV 35/80 Vertical Machining Center: In ideal condition, hardly used
Travels
X axis travel: 2000 mm
Y axis travel: 800 mm
Z axis travel: 585 mm
Max. table load: 3000 kg
Workpiece dimensions: 2240mm x 860mm x 640mm
Spindle:
Spindle power: 30 kW
Spindle speed: 1-6000 rpm
Spindle nose to table min. distance: 200mm
Tool shank: ISO 50 ,DIN 69871/A
Tools magazine
Number of stations: 30
Max. tool diameter: 125mm
Max tool length: 380 mm
Rapid traverse: 1-32000 mm/min
NUMERIC CONTROL CN MAZATROL 640M PC-FUSION CNC
|
|
Ad # 7405 | Vertical Machining Centers (VMC) |
2004 |
Hardinge |
VMC 1250II |
Excellent |
Sold |
Photo /
More Info. |
2004 Hardinge VMC 1250II CNC Vertical Machining Center: Fanuc OI-MB Control
Travels 50" x 26" x 25"
8000 RPM
CAT 40
Rigid tap
32 ATC
Chip Conveyor
280 PSI Coolant Thru
Troyke 10" Rotary Table
1879 Hours !!!
Full Machine Specifications
Fanuc Series OI-MB Controller
Worktable Size: X = 53.94, Y = 26.00
Workpiece and Fixturing Capacity: 3,000 lbs
Travel Distance: X = 50.00, Y = 26.00, Z = 25.00
T-Slots: Width and # of slots (.708/18 mm x5)
Center Distance Pitch 4.92/125mm
8,000 RPM Spindle with Direct Belt Drive (option)
32 tool swing arm tool changer
280 psi coolant through spindle
Coolant flush system
Rigid tapping
CAT 40 Taper Size
4th axis drive kit
Troyke 10" Full 4th Axis Rotary Table, Model #DL-10-A
Chip Conveyor
Manuals
1879 Hours |
|
Ad # 9049 | Vertical Machining Centers (VMC) |
1992 |
Haas |
VF-2 |
Excellent |
Sold |
Photo /
More Info. |
30" x 20" x 16": 1992 Haas VF-2. Less than 1500 feed hrs. Used at Kansas State University/ P... |
|
Ad # 5166 | Vertical Machining Centers (VMC) |
1996 |
Mazak |
MTV-515/40 |
Excellent |
Sold |
Photo /
More Info. |
Mazak V-515 40 X 20" Vertical Maching Center: Table Size..................51.18 in. x 21.65 in.
Table Load Capacity.........3300 Lbs
X-Axis Stroke..................41.33 in.
Y-Axis Stroke..................20.07 in.
Z-Axis Stroke..................22.04 in.
Distance from Table Top to
Spindle Nose............7.87 in.-29.92 in.
Spindle Speed Range............................25 - 6000 RPM
Number of Spindle Speed Ranges.........2 Steps
Spindle Taper.......................No. 50
Rapid Traverse Rate
X & Y Axis........................1024 IPM
Z Axis............................787 IPM
Cutting Feedrate.............0.040-314.961 IPM
Tool Shank Configuration.............Cat 50
Tool Storage Capacity...............60 Tools
Spindle Motor
( 30 Minutes/Continuous Rating )....20 HP/ 15 HP
EQUIPPED WITH
12” Indexer
20-50 taper toolholders
Mazatrol M-Plus
Chip Conveyor
Auto Tool Length Measurement
EIA
1000 Meters of Memory
Synchronous Tapping |
|
Ad # 15279 | Vertical Machining Centers (VMC) |
|
Okuma |
CNC 4VA |
Fair |
sold |
Photo /
More Info. |
: MUST BE PROFESSIONALLY RIGGED |
|
Ad # 8215 | Vertical Machining Centers (VMC) |
1981-? |
Pratt & Whitney |
TRIAX VII |
Fair |
Sold |
Photo /
More Info. |
X= 54, Y=26, Z= 20 VMC with 2,500 lb Capacity: X= 54", Y=26", Z= 20". Control is a Fanuc 6M, spindle= 35-3500 RPM. Has bot... |
|
Ad # 15345 | Vertical Machining Centers (VMC) |
1980s |
Enshu |
VMC650 |
Fair |
sold |
Photo /
More Info. |
20000lbs: Enshu cnc milling machine
Highest Spindle Speed (RPM): 3501 - 4000
Model: VMC-650
Spindle Horsepower: 20 Type: CNC, Vertical
Serial Number: 327
X-Axis Travel Bed: 41'' - 60''
Table Length: 60'' - 79.9''
Y-Axis Travel Bed: 21'' - 25''
Table Width: 25'' - 29.9''
Z-Axis Travel Bed: 21'' - 25''
Country of Manufacture: Japan
note: general specs please verify actual
machines |
|
Ad # 11819 | Vertical Machining Centers (VMC) |
80's |
mazak |
micro center V |
Fair |
sold |
Photo /
More Info. |
Travels:X 30", Y 16", Z 18", : used mazak micro center V
Control: Fanuc 6 M
Table: 32" x 16"
Travels:X 30", Y 16", Z 18",
24-Position Automatic Tool changer
Spindle: CAT 40
Tool Changer: 24 Stations
Tool Changer: Dual (swing) Arm
All Boxed Ways
R232 cable wired into control box to program offline |
|
Ad # 10083 | Vertical Machining Centers (VMC) |
1989? |
Mitsui Seiki |
VA-45 |
Fair |
Sold |
Photo /
More Info. |
Travel X/Y/Z, 28"/17.7"/17.7": Fanuc 11M
Rotary Table 4th axis
new memory board
Travel X/Y/Z, 28"/17.7"/17.7"
40 Taper, 6000RPM
25 Tools (Toolholders as pictured)
Table size 1250mm x 400mm
Spindle to Table 635mm
Manual |
|
Ad # 14437 | Vertical Machining Centers (VMC) |
1981 |
Mazak |
V20 |
Fair |
sold |
Photo /
More Info. |
: Mazak V20 with pallet changing. Was working great
when it was powered down in 2006. Hasnt been
on
since. |
|
Ad # 3698 | Vertical Machining Centers (VMC) |
|
MillPort |
VMC-1000 |
Fair |
Sold |
Photo /
More Info. |
LARGE MILLPORT VMC: |
|
Ad # 15562 | Vertical Machining Centers (VMC) |
1998 |
Haas |
VF-4 |
Fair |
Sold |
Photo /
More Info. |
travel:50" x 20" x 25": 1998 HAAS VF-4
Vertical Machining
Center,
std mfg specvs
below-please verify
actual machine
Specifications:
Control Haas
Table Size 52" x 18"
Max Table Load 3,500
lbs
X-Axis Travel 50"
Y-Axis Travel 20"
Z-Axis Travel 25"
Spindle Nose to
Table Top 4" – 29"
Spindle Taper CT 40
Spindle Speed 7500
RPM
Spindle
Motor................
... 20 HP
Tool Changer 20
Position
Machine Weight
12,500 lbs
Machine Dimensions
118"L x 110"W x 117"H |
|
Ad # 7705 | Vertical Machining Centers (VMC) |
1984? |
Cincinnnati |
5VC-750 |
Fair |
sold |
Photo /
More Info. |
PARTS MACHINE? 17" x 34" Cincinnati VMC with Tool Changer: Table: 17" x 34"
Control: Cincinnati Acromatic 900
ATC: 20 Station(?)
Spindle Size: CAT 40 |
|
Ad # 9210 | Vertical Machining Centers (VMC) |
1985 |
Mitsubishi |
Diamatic MPA-V55 |
Good |
Sold |
Photo /
More Info. |
: Travels-X axis 1000mm, Y axis 550mm, Z axis 550mm.
M-NAP2 control, Tsudakoma RNCM-401R (not interfaced for continous contouring)with Tsudakoma controller, 50 taper with 12 holders included, all available manuals, chip conveyer screw type. |
|
Ad # 6206 | Vertical Machining Centers (VMC) |
1985 |
MORI SEIKI |
#MV45/40 |
Good |
Sold |
Photo /
More Info. |
CNC VERTICAL MACHINING CENTER: TABLE SIZE -------------------------------- 18" X 44"
TRAVEL ------- ( X AXIS ) ----------------- 31.5"
TRAVEL ------- ( Y AXIS ) ----------------- 18"
TRAVEL ------- ( Z AXIS ) ----------------- 20"
SPINDLE TAPER ----------------------------- #40
VARIABLE SPINDLE SPEED UP TO -------------- 6,000 RPM
MOTOR DRIVE ------------------------------- 5.5 HP
EQUIPPED WITH ---
YASNAC MX2 CNC CONTROL
20 AUTOMATIC TOOL CHANGER
CHIP CONVEYOR
COOLANT
VISE |
|
Ad # 9302 | Vertical Machining Centers (VMC) |
2005 |
HAAS |
VF1DYT |
Good |
sold |
Photo /
More Info. |
Travels 20" x 20" x 20": Travels 20" x 20" x 20"
Taper BT # 40
7500 RPM
20ATC
20HP
Equipped With Haas Control
Chip Auger System
Programmable Coolant Nozzle
1 Meg Memory
Visual Quick Code Programming System
3.5" Floppy Disk Drive
Spindle Orientation
4th Axis Drive and Wiring
Coordinate Rotation and Scaling
BT40 Option
Extended Travel Option
Rigid Tap
Voltage 220
Approximate Spindle Time 2323:39
|
|