Year:
| 2008
|
Make:
| Sharp
|
Model:
| SV 2412
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 6100
|
Dimension: L x W x H | 73 x 74 x 93 |
Machine Location:
|
City: |
On Request
|
State: |
Indiana
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Used Sharp SV 2412 CNC Mill in very good
condition. •The Entire Machine Base is Built from One Piece Cast Iron, which Provides up to Ten Times the Dampening Capacity of Welded Steel •Induction Hardened and Precision Ground Box Ways, with Matching Surface Coated with TURCITE •Precision Ground Table •2 Nozzles at each side of Base Flush away Chips •Flexo-Metal Way Covers at each side of Table Fully Protects the Table Ways and Ballscrew •Roll-Out Coolant Tank •Three Pull-Out Chip Drawers for Easy Cleaning Less than 3000 Hrs under power and about 800hrs operating and cutting time on clock. Specifications: -7.5/10hp Fanuc Spindle Motor -8,000 RPM High Performance Spindle -Travel X,Y,Z - axis 24 12 18 -Box Way Construction -Fanuc OiMate Mc Control -400 Work Offsets -48 Work Coordinates -400 Registered Part Program Storage -Fanuc Macro -Fanuc High Speed Skip Function -Spare Function (4) -Fanuc (Auto Measure System) XYZ -Memory Card Reader in Front -Remote Jog Handle -Fanuc Monochrome LCD Screen -Fanuc Digital Drive System -10 Pocket Automatic Tool Changer-Umbrella Type. -SMART Automatic Lubrication System -Coolant System w/adjustable nozzles (3) -Large 42 Gallon Roll Out Coolant Tank -(Nice) Chip Flushing Nozzles at Both Sides of Chip Pan -Belt and Auger Conveyor -Rigid Tap -Full Metal Enclosure w/Removable Side doors -Manual Guide Computer Assist Program -Certified MEEHANITE castings ( Nice) Heavy and Strong -Induction Hardened and Precision Ground Box Ways (XYZ) -C-3 Grade Precision Ball Screw -Halogen Work Light SPINDLE -Taper Cat 40 -Spindle Motor 7.5/10 HP -Spindle Speed 8,000 RPM -Standard Torque 51 ft lb @ 1,200 RPM -Automatic Tool Changer -Tool Capacity 10 Tools- ATC Type Umbrella. -Max tool weight 17 Lbs -Selection Method BI-DIRECTIONAL -Tool Change time 6.5 seconds FEED RATES -Rapid Traverse (All 3 Axis) 1181 IPM (30M/Min) -Cutting Feed Rate (Max) 393 IPM (10M/Min) -Axis Motor (X,Y,Z,) 2.4,2.4,3.4 HP Max Thrust Rating X & Y Axis Motor 3500 lb Max Thrust Rating Z Axis Motor 5,150 lb Ball Screw Diameter & Pitch ( X,Y,Z,) 32mm x 10mm ACCURACY -Positioning +/- .0001 (0.003mm) -Repeatability +/- .0001 (0.003mm) MISCELLANOUS -Approximate Weight 6100 lbs -Dimensions of Machine 73 x 74 x 92.5 ( Even if you use auger conveyor) Belt Conveyor 121 x 74 x 92.5 -POWER REQUIREMENTS 220V/3 Phase/ 60 Hz . 15 KVA Air Requirements 5 CFM @ 100 PSI -Door Opening 26.8
|
Electrical Description |
|
|