Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 2926 | General Purpose Lathe 15in. to 23in. swing |
|
Lodge & Shipley |
18" |
|
Sold |
Photo /
More Info. |
18" Lodge & Shipley: |
|
Ad # 16083 | General Purpose Lathe 15in. to 23in. swing |
1979 |
Deemore |
|
|
sold |
Photo /
More Info. |
36 x 90": 1979 model Demoore tracer lathe
36" swing x 90" BC,
Front rear 4 jaw chuck,
9.5" spindle bore,
Automatic threading, |
|
Ad # 12929 | General Purpose Lathe 15in. to 23in. swing |
|
Century |
|
|
sold |
Photo /
More Info. |
16" swing x 48"centers: Century 18" - 35" x 4' - 6'
Catalog size 16",
S# 353,
18" Swing (35" swing in gap),
4' Between centers closed (6' open),
Sliding gap bed slides open up to 24",
8" 3 Jaw chuck, 27" Face plate, Taper attachment, Hard ways 2 piece, Steady rest
|
|
Ad # 14059 | General Purpose Lathe 15in. to 23in. swing |
|
Sharp |
1760K |
|
sold |
Photo /
More Info. |
17" x 60": Sharp 1760K
Swing over the bed 17"
60" Between centers
Swing over cross Slide 11"
Spindle Nose D1-6
2" Spindle Bore
50-1800 Rpm
Inch and metric threads
4 Jaw Chuck
6 Jaw Chuck |
|
Ad # 7195 | General Purpose Lathe 15in. to 23in. swing |
1987 |
CLAUSING METOSA |
C 2087 |
Excellent |
Sold |
No Photo /
More Info. |
20”/30 3/8” x 87”cc CLAUSING METOSA Gap Bed Lathe, Model C 2087: 20”/30 3/8” x 87”cc CLAUSING METOSA Gap Bed Lathe, Model C 2087
Center height 10 ¼”
Max. swing over bed 20 7/8”
Max. swing over carriage 18 7/8”
Max. over cross slide 12 5/8”
Bed width 13 ¾”
Gap length in front of faceplate 8 5/8”
Spindle bore 3 5/32”
Spindle nose D1-8 Camlock
Center taper No.5 M.T.
Cross slide travel 14”
Compound rest travel 6 ½”
Tailstock spindle diameter 2 7/8”
Tailstock spindle travel 7”
16 Spindle speeds 45-1600 RPM
55 Longitudinal feeds .0018-.052 IPR
55 Cross feeds .0005-.015 IPR
Thread range:
Inch 2-60 T.P.I.
Metric 0.5-15 MM.
Module .25-7.5
Diametral 4-120
EQUIPPED WITH:
Removable gap bed
Hardened bed ways
Inch/Metric dials
Swivel compound with T-Slot
Thread indicator
12” Dia. 3-jaw universal chuck
7 ¼” Dia. Cap. 3 point plain steady rest
4 Position carriage stop
Headstock sleeve adapter
(2) Dead centers
(3) M.T. adapters
TRAK 102, 2-axes digital readout
Dorian quick-change tool post with (7) holders and
(3) boring bar holders
Chip pan, rear splash guard and coolant system
12 HP 3/60/230 Volt Main Drive motor w/ controls |
|
Ad # 13416 | General Purpose Lathe 15in. to 23in. swing |
2004 |
Hwacheon |
HL-580 |
Excellent |
sold |
Photo /
More Info. |
23"swing, x 50" centers : Hwacheon 23”x 50” Gap Bed Lathe
Hwacheon Gap Bed Lathe Model #HL580
23"swing over the bed x 50" between centers.
It will swing 32" in the gap.
It has 12 speeds 28-1350 rpm.
THREADS METRIC, D1-8 cam lock spindle,
#5MT tailstock, footbrake, coolant system, 8" steadyrest,
20"dia. 3jaw chuck, faceplate, tool post, micrometer carriage stop,
10 HP 220/440 volts. 3 Ph.
The base including the chip pan is all one piece of cast iron. This lathe is very heavy built. The Date of mfg is June 2004.
This lathe is near new condition with approximately 2 years use.
|
|
Ad # 11073 | General Purpose Lathe 15in. to 23in. swing |
|
Leblond |
|
Excellent |
Sold |
Photo /
More Info. |
15 swing, 32" between centers: Leblond, 15”x32” Lathe, Total Cream Puff!!
Many years in this business, I have never seen a
Leblond so nice as this. It looks like it came out of
the crate today….It arrives to you tooled up, ready
to work.
Check out the flaking on the ways. It is all-original.
I can’t say this machine is perfect. It does have a
ding right near the chuck. It is not anywhere that
will interfere with anything, but it is there. You can
see it in the photos.
Having said that it is the nicest cleanest Leblond I
have ever seen…
Much nicer in person than in the photos.
The Flaw: You know it can’t be perfect…. There is
a ding on the flat ways near the chuck. You can see
it in the photos. It literally is in a spot that won’t
interfere with anything. But I want you to know it is
there.
There is a nice assortment of tooling included with
this machine.
3 Jaw Chuck
Carriage Stop
Thread Dial
Aloris Toolpost
Centers
Drawbar
5C Collet Speed chuck and more!
Don’t wait, machines this nice move fast!
We ship a lot of machines, So we get great rates on
shipping. Do not let shipping costs stop you from
looking at us. We want you to get the machine you
need from us!
This machine is physically located near Hartford,
CT.
Shipping: We will ship when your payment has
cleared your bank.
You are welcome to pick it up. We will load on to
your vehicle or the rigger of your choice. We do not
charge to load.
|
|
Ad # 13128 | General Purpose Lathe 15in. to 23in. swing |
|
Leblond |
Regal |
Excellent |
sold |
Photo /
More Info. |
17x 66: Leblond 17" x 66" Regal Engine Lathe
Specifications:
Serial: 2D586
Maximum Swing Over Bed: 17-3/4"
Maximum Swing Over Cross Slide: 10-3/4"
Distance Between Centers: 66"
Spindle Speeds: (12) 25 to 1000 RPM
Spindle Nose: L-0
Spindle Hole: 1-17/32"
Threads: (48) 2 to 112 TPI
Feed Range: (48) .002" to .116"
Cross Slide Travel: 9-5/8"
Compound Rest Travel: 4-3/8"
Tailstock Spindle Diameter: 2-7/16"
Tailstock Spindle Travel: 7"
Tailstock Spindle Center: No. 4 Morse Taper
Motor: 5 HP 220/440 3 Phase 60 HZ
Equipped With:
(1) 10" 3 Jaw Chuck
(1) 12" 4 Jaw Chuck
(1) 16" Diameter Face Plate
(1) 6" Capacity Steady Rest
*All Specifications Are Subject To Verification
By
Purchaser*
Shipping:
All freight arrangements are to be made by the
purchaser. Local pickup is available and we can
load onto your truck free of charge.
|
|
Ad # 9017 | General Purpose Lathe 15in. to 23in. swing |
|
|
|
Excellent |
sold |
Photo /
More Info. |
18 X 64": |
|
Ad # 9116 | General Purpose Lathe 15in. to 23in. swing |
1956 |
axelson |
|
Excellent |
SOLD |
Photo /
More Info. |
18 swing x 54 centers: MAXIMUM SWING OVER BEDWAYS: 18"
MAXIMUM SWING OVER CROSS SLIDE: 12"
MAXIMUM DISTANCE BETWEEN CENTERS: 54"
SPINDLE HOLE: 1-9/16"
SPINDLE NOSE: D-1-6"
SPINDLE SPEEDS: (24) 13 TO 1577 RPM
FEEDS: (54) .0027" TO .1655" PER REV.
THREADS: (54) 1-1/2 TO 92 TPI
CROSS SLIDE TRAVEL: 10-5/8"
COMPOUND REST TRAVEL: 4-3/4"
TAILSTOCK SPINDLE DIAMETER: 2-7/8"
TAILSTOCK SPINDLE TRAVEL: 9"
TAILSTOCK SPINDLE CENTER: NO. 4 MT
WIDTH OF BED: 16-7/8"
MOTOR: 10 HP 220/440/3/60
EQUIPPED WITH:
TAPER ATTACHMENT
HARDWAYS
THREAD DIAL
TAILSTOCK
OAD: 131" L-R X 47" F-B X 56" HIGH
APPROX. WEIGHT: 5,400 LBS. |
|
Ad # 4638 | General Purpose Lathe 15in. to 23in. swing |
1988 |
TOS |
SUI-50 |
Excellent |
Sold |
Photo /
More Info. |
20" x 80" cc Model SUI-50 TOS Manual Lathe: Item # 3175 -- Basic Information
Category
Lathes
Sub-Category
Lathes, Manual
Manufacturer
TOS
Model
SUI-50
Year
1988
Size
20 x 80cc
FOB
F.O.B. Truck, Wilmington, DE.
Price
$ 12500.00
Item # 3175 -- Full Description
20” x 80”cc Model SUI-50 TOS Lathe, new 1988
Maximum swing over bed 20”
Maximum swing over bed recess 22”
Maximum swing over cross slide 12.6”
Spindle bore 2.2”
Tailstock spindle diameter 3.15”
18 spindle speeds 14 to 2240 RPM
42 longitudinal feeds .0009 to .189 IPR
42 cross feeds .0004 to .095 IPR
Rapid traverse rates:
longitudinal 138 IPM
cross 69 IPM
Thread range
inch ½ to 120 TPI
metric .25 to 60mm
diametral 0.125 to 15mm
module 2 to 240mm
Equipped with:
Hardened ways
Swivel compound
Inch/metric threading
Thread dial
Micrometer carriage stop
Adjustable cross production stop
16” diameter 4-jaw chuck (new) with extra set of jaws
10” diameter 3-jaw universal chuck with extra jaws
Camlock spindle nose
4-way power rapid traverse
Rear T-slotted tool rest
5 ½” diameter capacity plain steady rest
Plain follow rest
Built-in 4-way tool post
Work light
Pan bed and coolant with splash guards
Live center
Dead center for head stock
10 H.P. 3/50/380 volt motor
Input voltage: 3/50/380 volt
Approximate weight: 6,550 lbs
Dimensions: 141”L x 51”W x 57”High
Condition: excellent
PRICE: F.O.B. Truck, Wilmington, DE…………………$12,500.00
|
|
Ad # 11858 | General Purpose Lathe 15in. to 23in. swing |
|
Turnmaster |
17"-5 |
Excellent |
sold |
Photo /
More Info. |
17" swing x 40" between centers: Used turnmaster 17" lathe
swing over bed:17"
swing over cross slide:
center distance: 40"
Gap bed with 2 1/8" spindle bore thru
Has taper attachment
new acu-rite turnmate readout. |
|
Ad # 4759 | General Purpose Lathe 15in. to 23in. swing |
|
LEBLOND |
HEAVY DUTY LATHE |
Excellent |
Sold |
Photo /
More Info. |
16" x 58" LEBLOND HEAVY DUTY LATHE: MAXIMUM SWING OVER BEDWAYS: 15-1/2"
DISTANCE BETWEEN CENTERS: 58"
SPINDLE SPEEDS: 30 TO 1200 RPM
SPINDLE HOLE: 1-1/2"
BED WIDTH: 12-3/16"
CROSS SLIDE TRAVEL: 7-7/8"
COMPOUND REST TRAVEL: 3-7/8"
FEED RANGE: (48) .0018 TO .104 IPR
THREADS: (48) 4 TO 224 TPI
LEADSCREW DIAMETER: 1-3/16"
TAILSTOCK SPINDLE DIAMETER: 1-15/16"
TAILSTOCK CENTER TAPER: NO. 3 MT
TAILSTOCK SPINDLE TRAVEL: 5"
MOTOR: 7.5 HP |
|
Ad # 5944 | General Purpose Lathe 15in. to 23in. swing |
1967 |
MONARCH |
SERIES 50 |
Excellent |
Sold |
Photo /
More Info. |
16” x 78” cc Series 50 MONARCH Engine Lathe: 16” x 78” cc Series 50 MONARCH Engine Lathe
Max. swing over bed and carriage wings 16”
Max. swing over cross slide 10”
Bed width 12”
Spindle bore 1 13/16”
Camlock spindle nose D-1-6”
Compound rest top slide travel 2 1/2”
Tailstock spindle diameter 2 3/8”
Tailstock spindle travel 5 ½”
Tailstock center size No.4 M.T.
3 ranges infinitely variable spindle speeds 30-1800 RPM
54 feeds .0011-.070 IPR
Thread range 1 ½ - 92 T.P.I
EQUIPPED WITH:
Hardened and ground bedways
Swivel compound
Presetting of surface feet per minute provided
Spindle speed selection by work diameter
Swing type chuck guard
12” dia. 6-jaw chuck
12” dia. 4-jaw chuck
SJOGREN collet chuck w/ collets
Micrometer carriage stop
Aloris toolpost with (6) toolblocks
(4) lathe turning tools
Thread indicator
(3) live centers
Drill chuck
Pan bed and coolant
10 H.P. variable speed drive with controls
3/60/460 volt electrics
|
|
Ad # 8134 | General Purpose Lathe 15in. to 23in. swing |
2006 |
Victor |
1640B |
Excellent |
Sold |
Photo /
More Info. |
Manual Lathe 16 swing x 40 centers: Victor 1640B Engine Lathe
High quality lathe
Spindle supported at 3 points by precision bearings
One shot lubrication for aprone and slide way
Hardened and ground bed ways
Hardened and ground gears
Inch/Metric dual dials
Inch/Metric threading without changing gears
Full length foot brake
Rigid one piece cast iron base
Approx. weight - 4,110 lbs
Approx. dimensions - 106L x 37W x 62"H
Standard Accessories:Special Pkg
Face plate
Coolant pump, 1/8 HP
Full length splash guard
4 pos. Carriage stop
8" dia. 3 jaw chuck
10" dia. 4 jaw chuck
Steady rest
Follow rest
Halogen work light
4 way tool post
Specifications: 1640B Series w/ Special pkg.
Machines 1640B
Swing over bed 16.12"
Swing over cross slide 10.2"
Swing over gap 23"
Length of gap 11.3"
Center distance 40"
Width of bed 11"
Spindle hole 2.03"
Spindle nose Camlock D1-6
Spindle RPM 33-2000
No. of spindle speeds 16
Tailstock quill diameter 2"
Tailstock taper, Morse MT 4
Tailstock quill travel 4.6"
INCH threads 2-56 TPI x 32
METRIC threads 0.45-7mm x 32
Main motor, AC 7.5 HP
Options included: Newall 2 axis readout, Quick change toolpost with 6 holders
|
|
Ad # 11950 | General Purpose Lathe 15in. to 23in. swing |
1990s |
Victor |
1630B |
Excellent |
sold |
Photo /
More Info. |
16" x 30": Victor 1630B
7.5 HP
16" x 30"
Swing over gap 23"
Swing over cross slide 10"
Speed 33-2000
Spindle Bore Diameter 2" 1/32"
3 Jaw Chuck
4 - 56 TPI
0.5 - 7 mm
Anilam Pro Digital Read Out |
|
Ad # 10955 | General Purpose Lathe 15in. to 23in. swing |
1980 |
south bend |
tornado |
Excellent |
Sold |
Photo /
More Info. |
south bend manual 20 inch lathe x 10ft center: south bend lathe
20 inch swing, 10" swing over cross slide
10ft between centers
2 chucks-18" (one self centering, 4 jaw chuck), 3 jaw
lots of extra tooling, steady rest, metric tranposing gears,
coolant pump |
|
Ad # 7742 | General Purpose Lathe 15in. to 23in. swing |
1998 |
Turnmaster |
|
Excellent |
SOLD |
Photo /
More Info. |
16" swing x 40"cc heavy duty engine lathe: Turnmaster 16" x 40" Heavy Duty Engine Lathe,16" swing over bed, 24" in gap... |
|
Ad # 5367 | General Purpose Lathe 15in. to 23in. swing |
1982 |
LEBLOND MAKINO |
Regal Servo Shift |
Excellent |
Sold |
Photo /
More Info. |
Leblond Engine Lathe 19" swing x 150" centers: Item # 4198 -- Basic Information
Category
Lathes
Sub-Category
Lathes, Manual
Manufacturer
LEBLOND MAKINO
Model
Regal Servo Shift
Year
1982
Size
19" x 150"cc
Item # 4198 -- Full Description
19” x 150”cc LEBLOND MAKINO Regal Servo Shift Engine Lathe, 10 H.P., 3-phase, 60 cycle A.C. main motor and controls, new 1982
Actual swing over bed 19 ¼”
Swing over cross slide 12 ¼”
L-2 spindle nose
Hole through spindle 3”
12 Spindle speeds 40 to 1600 RPM
40 Thread changes ¼ to 64 T.P.I.
48 Feed changes .0032 to .104 I.P.R.
23 Metric threads 1.75-63 MM
Hardened and ground bedways
EQUIPPED WITH:
Taper attachment
10” 3-jaw chuck
12” 4-jaw chuck
Steady rest
14” face plate
9” 3-jaw plain steady rest
Chip pan and coolant
Floor space: 3’ x 17 ½’ x 4 ½’ High
Approx. weight: 8,500 lbs.
|
|
Ad # 14853 | General Purpose Lathe 15in. to 23in. swing |
2004? |
Birmingham |
YCL-1660 |
Excellent |
Sold |
Photo /
More Info. |
16" swing x 60" centers: Birmingham YCL-1660 gap bed manual lathe
16" swing over bed ways
60" center distance
10" 3 jaw chuck
12" 4 jaw chuck
2-1/4" spindle bore
Spindle RPM: 25-2000
taper attachment
DRO-2 axis
8" steady rest,follow rest,face plate
QC toolpost-CA w/ 4 holders
Inch/metric threading
Note: very nice lathe, little used! |
|
Ad # 7989 | General Purpose Lathe 15in. to 23in. swing |
1982 |
Summit |
2080 Engine Lathe |
Excellent |
Sold |
Photo /
More Info. |
Summit 19 x 80 gap bed 3" bore engine lathe: Summit 2080 19" swing x 80"cc heavy duty engine lathe (swing in gap-27") wi... |
|
Ad # 2501 | General Purpose Lathe 15in. to 23in. swing |
1964 |
MONARCH |
1610 X 30 |
Excellent |
Sold |
Photo /
More Info. |
MONARCH SERIES 613 PRODUCTION LATHE: Swing Over Bed 16"
Swing over Cross Slides 10"
Distance Between Centers 30"
Main Motor Drive 15 HP
Spindle Speeds 12 to 1500 RPM (36 SPEEDS)
Hole In Spindle 2"
Thread cut per inch 2 to 120 (66 Feed Changes)
Tailstock Spindle Diam. 4"
Tailstock Travel 6"
Tailstock Spindle Taper Morse No.4
|
|
Ad # 2723 | General Purpose Lathe 15in. to 23in. swing |
1997 |
CUBIC LATHE |
LS-1860 G |
Excellent |
Sold |
Photo /
More Info. |
Manual Lathe 18" x 60" centers : CUBIC GAP BED MANUAL LATHE
LIKE NEW
7.5hp,220/3
18" BY 60" TURN,UP TO 23" WITH GAP REMOVED
QUICK CHANGE TOOL POST INCLUDED WITH HOLDERS
GEAR DRIVE,
EXTRAS INCLUDE
NEW SANDVIK TURNING TOOLS
D1-8 Spindle;
10" 3 JAW,12" 4 JAW
FLAT TURNING FACE PLATE
STEADY REST
LIVE CENTER
3-1/8" Spindle Bore
Machine runs like new!! |
|
Ad # 7624 | General Purpose Lathe 15in. to 23in. swing |
|
Hendy |
18 x 90 |
Fair |
sold |
Photo /
More Info. |
18" x 90" Hendy Engine Lathe with Options: 14" 3-Jaw Chuck
Spindle Speeds: 16 - 570 rpm
Tailstock with positioning crank
2 Steady Rests
There MIGHT also be a 4-Jaw chuck included if it can be located |
|
Ad # 14147 | General Purpose Lathe 15in. to 23in. swing |
|
Monarch |
|
Fair |
sold |
Photo /
More Info. |
18" X 96": 18" X 96"
14" swing over carriage
1- 12" 3 jaw chuck
1- 14" 4 jaw chuck
3 hp electric motor
|
|
Ad # 11864 | General Purpose Lathe 15in. to 23in. swing |
1994 |
Enco |
111-1658 |
Fair |
sold |
Photo /
More Info. |
15-3/4" Swing Over Bed, 8-3/4" Swing Over Cross x 60" centers: Enco Model 111-1658 Gap Bed Engine Lathe
15-3/4" Swing Over Bed, 8-3/4" Swing Over Cross Slide, 22" Swing in Gap, 12-1/2" Length of Gap, 60" Maximum Between Centers,
2-1/2" Hole Thru Spindle,
15-Spindle Speeds: 22 to 1,800 RPM,
Inch/Metric Threading,
Tailstock, Steady Rest, Follow Rest, Chip Pan, Coolant Tank and Pump,
7-1/2 HP, Three Phase Motor and
Approx: 112" x 42" x 69" and 5,500 Lbs
Removeable gap bed. 15 3/4" x 58". 21" over gap. 8 3/4 over cross slide. 2 1/4" spindle thru. 15 speeds, 22- 1800 rpm. 7 1/2 hp. 9 1/2" 3 jaw chuck. steady rest and follower rest. |
|
Ad # 4021 | General Purpose Lathe 15in. to 23in. swing |
|
Pratt & Whitney |
Model B |
Fair |
sold |
Photo /
More Info. |
General Purpose Engine Lathe: Swing: 22"
Bed Length: 54"
Spindle Bore: 2"
|
|
Ad # 1253 | General Purpose Lathe 15in. to 23in. swing |
|
Cincinnati |
Hydrashift 17 x 42" |
Fair |
Sold |
Photo /
More Info. |
Heavy Duty 17 swing x 42"bed Lathe: Swing over ways: 17"
Swing over cross: 10"
distance between centers: 42"
Spindle bore: 1-3/4"
10" 3-jaw chuck included
travel dial readout on bed travel
5 HP
25-980 rpm
taper attachment installed
coolant |
|
Ad # 7710 | General Purpose Lathe 15in. to 23in. swing |
1963 |
Monarch |
|
Fair |
sold |
Photo /
More Info. |
20 swing x : Includes:
tool post, taper attachment, stead rest, |
|
Ad # 14033 | General Purpose Lathe 15in. to 23in. swing |
1940 |
Monarch |
14" C |
Good |
sold |
Photo /
More Info. |
Swing: 16.5" x 30" between centers: Monarch Manual Lathe
Model: 14" C
Capacity: 16.5 Swing, 30" between centers
Electrical: 220/3 phase
1 3/4" thru head stock
16 Spindle speeds from 24-1000 rpm
Geared for chasing threads w/thread chasing dial
60 feed and threading speeds
5 HP
3 Jaw Chuck/4 Jaw chuck/collet head with 3/16,
1/4,5/16,3/8,7/16,1/2,9/16,5/8, and 1" collets
4 position Turret Tool Post
Aloris Type quick change tool post
Carbide insert tool holders for turning, (right,
left and straight) knurling tool, cut off tool,
boring bar holder
live ball bearing center
#6 MT - # MT adapter
3/4" drill chuck w/#6 MT for tail stock
|
|
Ad # 12362 | General Purpose Lathe 15in. to 23in. swing |
|
precision latheSOUTH BEND |
|
Good |
sold |
Photo /
More Info. |
: 5C COLLET CLOSER 3 JAW CHUCK AMERICAN MADE QUICK CHANGE TOOL HOLDER DRILL C... |
|
Ad # 12228 | General Purpose Lathe 15in. to 23in. swing |
|
Leblond |
20" x 60" |
Good |
sold |
Photo /
More Info. |
20" x 60" : Leblond
20" x 60"
3 Jaw Chuck 15"
4 Jaw Chuck 18"
8-1000 RPM
Voltage 440/3 Phase
1" 1/2 Spindle Bore |
|
Ad # 16092 | General Purpose Lathe 15in. to 23in. swing |
|
Leblond |
15 x 36 |
Good |
sold |
Photo /
More Info. |
15 x 36": Leblond lathe 15"swing x 36" bed
Swing over cross slide=9"
8" 3 jaw chuck & 10" 4 jaw chuck
Taper attachment
No toolpost
|
|
Ad # 5217 | General Purpose Lathe 15in. to 23in. swing |
|
COLCHESTER |
8000 |
Good |
Sold |
Photo /
More Info. |
15"x 50" COLCHESTER 8000 Engine Lathe, : Specifications:
Swing over Bed 15-1/2"
Swing over Cross-Slide 9-1/2"
Distance between Centers 50"
Spindle Speeds (16) 25 to 2000 RPM
Spindle Mount D1-6 Camlock
Spindle Bore 2"
Feeds(Range) (15) .0015 to .040 IPR
Threads(Range-Inch) (45) 2 to 72 TPI
Threads (Range-Metric) (39) .2 to 14 mm
Tailstock Taper #4 MT
Motor 230V 3PH 60C
Dimensions 38" X 95"
Accessories Included 10" 3-Jaw BUCK Adjustrue Chuck, 5C Lever Collet Closer, 12" 4 Jaw Chuck, Taper Attachment, Quick Change Toolpost, Drill Chuck, Trav-A-Dial, Coolant
|
|
Ad # 7858 | General Purpose Lathe 15in. to 23in. swing |
|
Clausing/Colchester |
15 x 50 |
Good |
Sold |
Photo /
More Info. |
15" x 50" Clausing Engine Lathe: Swing Over Bed: 15"
DBC: 50"
8" 3-Jaw Chuck
6" 4-Jaw Chuck
Spindle Bore: 2"
Spindle Speeds: 37 - 1,500 rpm
Quick Change Tool Post
Taper Attachment
|
|
Ad # 5949 | General Purpose Lathe 15in. to 23in. swing |
1978 |
TARNOW |
TUJ-50 |
Good |
Sold |
Photo /
More Info. |
22”/31 ½” x 118”cc TARNOW TUJ-50 Removable Gap Bed Lathe: 22”/31 ½” x 118”cc TARNOW TUJ-50 Removable Gap Bed Lathe
Swing over bed 22.05”
Swing through gap 31.5”
Length of gap 9.84”
Swing over carriage 14.57”
Width of bed 14.57”
Distance between centers 118.1”
Headstock spindle bore 2-3/8”
Headstock spindle nose D1-6” Camlock
Tailstock quill diameter 3 ¼”
Tailstock quill travel 7”
Tailstock taper in quill No. 5 M.T.
18 Spindle speeds 35.5-1800 RPM
49 Longitudinal feeds .0007-.88 IPR
49 Cross feeds .00035-.44 IPR
Thread range:
Inch 2-56 T.P.I.
Metric .045-28 mm.
EQUIPPED WITH:
Removable gap bed
Induction hardened bed ways
15” dia. 3-jaw universal chuck
14” dia. 4-jaw chuck
Drive plate
Swivel compound
Inch/metric threading with (21) change gears
Camlock spindle nose
Swing chuck guard
T-slotted rear rest
Thread dial
6” dia. cap. 3-point roller steady rest
Aloris toolpost
(2) Back plates
(2) Dead centers
Pipe center
Chip pans
10 H.P. main drive motor
3/60/230 volt electrics
|
|
Ad # 12742 | General Purpose Lathe 15in. to 23in. swing |
|
Hercules |
1660 |
Good |
sold |
Photo /
More Info. |
16" x 60": Hercules 1660 Lathe
16" x 60"
3" 1/4 Spindle Bore
Taper Attachment
Gap Bed
Rapid Travers
Foot Brake
3 Jaw 10" Chuck
4 Jaw 12" Chuck
20" Face Plate
Inch and metric Threads |
|
Ad # 14192 | General Purpose Lathe 15in. to 23in. swing |
1982 |
San Yuen |
Sag 2500 |
Good |
sold |
Photo /
More Info. |
18" x 60": San Yuen Lathe 18" x 60"
35-1500 RPM
220 Volt 3 Phase
18" x 60"
10" over cross slide
2" 1/2" spindle bore
4 Jaw 12" Chuck
Steady Rest
Inch/Metric Threads
|
|
Ad # 5414 | General Purpose Lathe 15in. to 23in. swing |
|
Lodge & Shipley |
Blue Chip 21 |
Good |
Sold |
Photo /
More Info. |
21" x 120" Gap Bed Lathe: Distance Between Centers: 120"
Swing Over Bed: 21-1/2"
Swing Over Cross Slide: 14-3/4"
Swing Over Gap: 36"
Distance from Spindle Nose to Start of Gap: 5-1/2"
Distance from Spindle Nose to End of Gap: 12-1/4"
Gap Casting Included
Bed Width: 15-3/4"
3-Jaw 15" Chuck
Spindle Nose: 11", D1
Spindle Bore: 3-1/2" diam.
Spindle Power: 12.5 hp
Spindle Speeds: 20 - 1,000 rpm
Spindle Speed Steps:
12 steps via a "Quick Change" Gear Box
Tail Stock with MT 5 Live Center
Steady Rest with Rollers: 12"
Steady Rest: 8"
Inch/Metric Threading
4-Way Tool Block |
|
Ad # 15312 | General Purpose Lathe 15in. to 23in. swing |
1980s |
Nardini |
1785E |
Good |
sold |
Photo /
More Info. |
17" x 85": Nardini 1785E
10" 3 Jaw
Height of Centers8 5/8"
Distance Between Centers 86"
Swing over Bed:17 5/16"
Swing over Wings of Saddle:15 3/8"
Swing over Cross Slide:10 5/8"
Cross Slide Trave:l9 7/8"
Top Slide Trave:l5"
Tool Section:3/4" x 3/4"
Bed Width:10 5/8"
Bed Height:12 5/8"
Spindle Nose:D1-6"
Spindle Bore:2 1/32"
Spindle Internal Taper:1:20
Taper in Reduction Sleeve:4 MT
Spindle Speeds (18)25-2000
Quill Diameter:2 3/8"
Quill Taper:8 5/8"
Quill Internal Taper:4 MT
Lateral Adjustment:5/8"
Number of Threads:216
Metric Threads (54) 0.40-18.472
Inch Threads (54)42-2 3/4"
Module Threads (54).02-3.5
Diametral Pitch Threads (54)84-3
Pitch of Leadscrew4
Number of Feeds:264
Cross Feeds (132)0.0010-0.0488 in/rev
Longitudinal Feeds (132)0.0021-0.0976
in/rev
Motor8/4 HP
Coolant Unit Motor:1/8 HP
Dimensions:146" x 40"
Height:58"
Weight4220 lbs. |
|
Ad # 14855 | General Purpose Lathe 15in. to 23in. swing |
2008 |
Knuth |
DM1000A |
Good |
sold |
Photo /
More Info. |
16" swing x 40" centers: 2008 Knuth # DM1000A Manual Lathe
chuck: 10" 3 jaw & 12.5" 4 jaw
DRO:Newall 2 axis
spindle bore: 2-1/8"
includes: face plate,follow rest
toolpost w/4 holders
motor: 7.5 HP
Std MFg specs below:
M 1000 A Lathe with 2 axis Digital Read Out positioning system
• Large 2” spindle capacity
• Powerful 7.5Hp motor, 220V, 3ph, 60Hz
• Complete accessory set
• Adjustable slip clutch eliminates tooth breakage caused by overload conditions
• Foot brake for instant spindle stopping and shut off
• Chuck guard with shut-off interlock (spindle will not operate unless closed)
• Hardened and ground gears and shafts
• Heavy-duty, large-sized bed, hardened and precision ground
• Slide guide way adjustable through taper gibs
• Gapped bed with bridge
• Rear main spindle supported on tapered roller bearings and thrust bearings
• Forward main spindle supported on double-row cylindrical roller bearings
• Headstock runs in oil-bath
• ASA D1-6 Camlock mount
• Feed drive gears and apron run in oil-bath
Standard equipment:
• Position indicator
• 3-jaw chuck Ø 10”
• 4-jaw face plate chuck Ø 12.6”
• Face plate Ø 20”
• 4-station tool holder
• Coolant system
• Steady and follow rests
• Splatter guard
• Chuck guard
• Foot brake pedal
• Halogen work lamp
• Reducing sleeve
• 2 steady centers
• Operating tools
Optional Equipment:
• 5pc Quick Change Tool Holder set “WB” Article #103195
Specifications DM 1000 A:
Max. Turning diameter over bed: 16"
Max. Turning diameter over slide: 9.5"
Max. Turning diameter in gap: 23"Gap length:8"
Max. Turning length: 40"
Spindle Bore: 2"
Spindle taper: MT 6
Spindle mount: Camlock ASA D1-6
Spindle speeds (12 increments): 30 - 1600 rpm
Feeds: 115 total
- Longitudinal: 0.0015-0.041"
- Transversal: 0.0007-0.021"
Thread: Metric: (30 pitches) 0.45 - 20 mm
- Witworth inch: (35 pitches) 80 - 1 3/4 tpi
- Module: (25 pitches) 0.25 - 10 mm
- Diametrical: (30 pitches) 160 - 3 1/2 DP
Travels:
- Compound: 5.5"
- Cross slide: 9.4"
Tailstock quill: 5" travel
Tailstock quill taper: MT 4
Compound slide swivel range: ± 45°
Tailstock lateral adjustment range: ± 0.4"
Square tool shank: ¾” x ¾”
Dimensions (L x W x H): 86”x38”x51”
Weight: 3,200 Lbs
UL approval inspection sticker on side ,nice lathe was over 13K new! |
|
Ad # 12318 | General Purpose Lathe 15in. to 23in. swing |
1980s |
Sharp |
1882S |
Good |
sold |
Photo /
More Info. |
3" Spindle Bore 18" x 82" : Sharp Lathe 1882S
18"swing x 85" centers
10"swing Over Crosslide
Gap Bed
3" Spindle Bore
3- Jaw 12" Chuck
26-1500 RPM
inch/Metric Threads
Voltage wired 440 |
|
Ad # 14621 | General Purpose Lathe 15in. to 23in. swing |
2007? |
Summit |
1660B |
Good |
sold |
Photo /
More Info. |
: Summit heavy duty 1660B lathe
16" swing over bed ways,9.3"over cross slide
center distance: 60"
spindle speed: 20-2000 RPM
spindle: D1-8?
tailstock: 5MT
10HP main motor
coolant
gap bed : 25" swing in gap
3" spindle bore
inch/metric threads
newall dro system-2 axis
rapid traverse
taper attachment
10" 3 jaw chuck
Standered Features
•Clutched headstock
•All cast iron construction
•Hardened & precision ground bedways
•Quick change gearbox cuts American (inch),
metric and module and diametrical pitch threads
•Rapid traverse on carriage (4 way joystick)
•2 Speed tail stock
•Large chrome alloy spindle with big 3″ thru hole
•Hardened and ground alloy steel gears, shafts
and splines
|
|
Ad # 7200 | General Purpose Lathe 15in. to 23in. swing |
1954 |
LEBLOND |
|
Good |
Sold |
No Photo /
More Info. |
20” x 15’cc LEBLOND Heavy Duty Engine Lathe: 20” x 15’cc LEBLOND Heavy Duty Engine Lathe
Max. swing over bed ways 23 ¾”
Max. swing over compound rest 14 ½”
Spindle bore 2”
Spindle nose L-2
Center size No.5 M.T.
Bed width 21 3/8”
Cross slide travel 14 ½”
Compound rest travel 4”
Tailstock spindle travel 12”
32 Spindle speeds 9-800 RPM
60 Feeds .004-.250 IPR
Thread range 1-60 T.P.I.
EQUIPPED WITH:
Hardened replaceable steel bed ways
Swivel compound
Taper turning attachment
Rapid traverse attachment
Rapid traverse to carriage
L-2 nose
4-jaw chuck
Aloris tool post with (11) holders
(2) live centers
Drill chuck
Misc. tooling
15” Dia. cap. plain steady rest
8” Dia. cap. plain steady rest
Boring bar holder w/ boring bar
Pan bed and coolant
20 H.P. 3/60/220-440 Volt Motor w/ controls
Wired for 3/ Volt operation |
|
Ad # 12841 | General Purpose Lathe 15in. to 23in. swing |
1992 |
Shenyang |
SK16A |
Good |
sold |
Photo /
More Info. |
: Gap Bed Engine Lathe
16" x 60"
Make:Shenyang
12" Chuck 3 Jaws
Foot Brake
Metric and Inch Threads
|
|
Ad # 15312 | General Purpose Lathe 15in. to 23in. swing |
1980s |
Nardini |
1785E |
Good |
sold |
Photo /
More Info. |
17" x 85": Nardini 1785E
10" 3 Jaw
Height of Centers8 5/8"
Distance Between Centers 86"
Swing over Bed:17 5/16"
Swing over Wings of Saddle:15 3/8"
Swing over Cross Slide:10 5/8"
Cross Slide Trave:l9 7/8"
Top Slide Trave:l5"
Tool Section:3/4" x 3/4"
Bed Width:10 5/8"
Bed Height:12 5/8"
Spindle Nose:D1-6"
Spindle Bore:2 1/32"
Spindle Internal Taper:1:20
Taper in Reduction Sleeve:4 MT
Spindle Speeds (18)25-2000
Quill Diameter:2 3/8"
Quill Taper:8 5/8"
Quill Internal Taper:4 MT
Lateral Adjustment:5/8"
Number of Threads:216
Metric Threads (54) 0.40-18.472
Inch Threads (54)42-2 3/4"
Module Threads (54).02-3.5
Diametral Pitch Threads (54)84-3
Pitch of Leadscrew4
Number of Feeds:264
Cross Feeds (132)0.0010-0.0488 in/rev
Longitudinal Feeds (132)0.0021-0.0976
in/rev
Motor8/4 HP
Coolant Unit Motor:1/8 HP
Dimensions:146" x 40"
Height:58"
Weight4220 lbs. |
|
Ad # 10274 | General Purpose Lathe 15in. to 23in. swing |
|
summit |
23460 |
Good |
Sold |
Photo /
More Info. |
20 " swing x 14ft centers: 21" 4 jaw chuck
20" swing over ways, 16" over cross slide
inch/metric threading
spindle bore: 4"
steady rest
QC toolpost
14ft centers
rapid traverse
rpm: 20-1500 |
|
Ad # 15959 | General Purpose Lathe 15in. to 23in. swing |
1997 |
YANG |
19 x 60 |
Good |
sold |
Photo /
More Info. |
19" x 60": 1997 Yang "cadillac" 19 x 60" manual lathe
19" swing over bed
60" between centers
Comes with:
Newall DRO
10" Bison 3 jaw chuck
16" face plate
10" back plate
Steady Rest
Follow Rest
12" Bison 4 jaw chuck and Aloris tool post
is available for an additional cost.
This Lathe is in very good condition,super
nice/clean..ready to go
Add loading fee approx: $750.00 onto flat bed
|
|
Ad # 12436 | General Purpose Lathe 15in. to 23in. swing |
|
Sanynen |
NG 1850A |
Good |
sold |
Photo /
More Info. |
18" x 50": Sanynen NG 1850
3 Jaw Chuck 7" 1/2"
18" x 50"
60-1500 Rpm
Steady Rest 3"
Spindle Bore 1" 1/2"
Foot Brake
|
|
Ad # 16085 | General Purpose Lathe 15in. to 23in. swing |
2006 |
kingston |
hd2260 |
Good |
sold |
Photo /
More Info. |
22 x 60": 2006 model HD2260 Kingston manual lathe
Good condition 4 jaw chuck, 4" spindle hole |
|
Ad # 11507 | General Purpose Lathe 15in. to 23in. swing |
1943 |
Monarch |
? |
Good |
sold |
Photo /
More Info. |
16 x 48: Monarch
16" x 48"
Taper
Tooling
3 Jaw 9 inch Chuck Shown
4 Jaw 12 inch Comes with
Steady Rest
22 x 487 RPM |
|
Ad # 14931 | General Purpose Lathe 15in. to 23in. swing |
? |
Leblond |
Regal |
Good |
sold |
Photo /
More Info. |
16" x 54": Leblond Regal manual engine lathe #3B
15" swing over bed ,8" over c ross slide
spindle bore: 1-3/4"
chuck: 8" 3 jaw
threading:english std. threading only
taper attachment
steady rest: 4" max
CA toolpost w/ 5 holders
RPM: 30-1200
220/3
some minor acc tooling included |
|
Ad # 12097 | General Purpose Lathe 15in. to 23in. swing |
1965 |
leblond |
regal |
Good |
sold |
Photo /
More Info. |
19"swing x 72"centers: leblond lathe
19inch swing 72 center,
1 3/4 hole in spindle
3 jaw chuck,
steadyrest quick change threading,
5 horsepower 480 3 phase,
ways are in very good condition,
no 3 phase to the in my new shop |
|
Ad # 8206 | General Purpose Lathe 15in. to 23in. swing |
80's? |
LONGEM |
LG 2060-D |
Good |
sold |
Photo /
More Info. |
20" x 60" Heavy Duty Engine Lathe: Swing: 20"over ways, 11 in over crosslide
3-1/4" spindle bore
DBC: 60"
Spindle Speeds: 28 - 1,600 rpm
Spindle Bore: 3-1/8"
Chuck" 12" 3-Jaw Chuck
Steady Rest
Follow Rest
Tailstock
Inch/Metric Threading
Work Light
|
|
Ad # 9712 | General Purpose Lathe 15in. to 23in. swing |
70s |
keiyoseiki |
kg1000 |
Good |
sold |
Photo /
More Info. |
18x40 10"chuck: 18"swing
1/2"live centertail stock is jacobs #33
'tool post holder 2"thru hole |
|
Ad # 15337 | General Purpose Lathe 15in. to 23in. swing |
na |
voest |
|
Good |
sold |
Photo /
More Info. |
18 inch swing 60 inch centers: 18"swing x 50" centers
voest lathe 1-7/8 thru hole,
tailstock |
|
Ad # 14418 | General Purpose Lathe 15in. to 23in. swing |
80's? |
Turnmaster |
17"-5 |
Good |
sold |
Photo /
More Info. |
18" x 60": Turnmaster 17"-5 engine lathe-heavy duty
18" swing over bed,11.75" over cross
slide
center dist: 60"
gap bed design
inch/metric threads:Inch, metric,
and module threading
spindle:D!-8 bore2-1/4"
spindle: D1-8
10 hp main motor
12" 4 jaw chuck,10" 3 jaw chuck,face
plate
taper attachment
Spindle RPM: 20-1600RPM
5" steady rest & follow rest
drill chuck & live center
Notes:coolant pump not working,DRO
display box was removed- |
|
Ad # 1336 | General Purpose Lathe 15in. to 23in. swing |
? |
LG |
2080 OS |
Good |
Sold |
Photo /
More Info. |
Long Bed Manual Lathe: Swing Over Cross Slides 20" x 80" centers
Spindle 3" dia Bore
Gap Bed
Inch/Metric Threads
Steady Rest (3")
Tool Post
#-Jaw Chuck - 12"
|
|
Ad # 5177 | General Purpose Lathe 15in. to 23in. swing |
1951 |
Monarch |
20" |
Good |
Sold |
Photo /
More Info. |
26" x 52" Monarch Engine Lathe: Swing: 26.5"
Swing Over Cross Slide: 18"
Distance Between Centers: 52"
Spindle Bore: 1-1/2"
Spindle Speeds: 17 - 700 rpm
Inch Threading |
|
Ad # 15507 | General Purpose Lathe 15in. to 23in. swing |
1970 |
Monarch |
612 |
Good |
sold |
Photo /
More Info. |
16" swing x 54" between centers: Monarch Manual Engine Lathe
Capacity: 16" swing x 54" between centers
Electrical: 220 3 phase
4 Jaw Chuck
Steady Rest
Swing Over Bed Ways.16"
Swing Over Cross Slide.10"
Center Distance.54"
Spindle Hole.2"
Spindle Speeds.12 To 1,500 Rpm's
Spindle Nose.D-1-8
Feeds..0013 To .0821
Threads Inch.2 To 120 TPI
Threads Metric.No
Tail Stock Quill Diameter.4"
Tail Stock Quill Travel.6"
Tail Stock Taper.# 4 Morse
Steady Rest.4"
Main Motor.10 Hp 220 / 440 |
|
Ad # 10520 | General Purpose Lathe 15in. to 23in. swing |
80's ? |
Victor |
2080 |
Good |
sold |
Photo /
More Info. |
20 x 80 Manual lathe w/ 3-1/4" spindle bore & taper attach: 20' swing over removable gap bed
12" swing over cross slide
gap bed
taper attachment
steady rest roller tip up to 8"
inch/metric threading
12" 3 jaw chuck
14" 4 jaw chuck
3-1/4" spindle bore
31-1500 RPM
10HP ?? |
|
Ad # 14105 | General Purpose Lathe 15in. to 23in. swing |
|
Sirco |
PA 20 - 4 |
Good |
sold |
Photo /
More Info. |
4" Spindle Bore 20" x 80": Sirco lathe,
4"spindle bore
84" between centers
taper attachments
3jaw and 4 jaw, steady rests
12 speeds 22-1500 RPM
|
|
Ad # 15253 | General Purpose Lathe 15in. to 23in. swing |
1941 |
Sidney |
20" |
Good |
sold |
Photo /
More Info. |
24" max swing x 10ft centers: Sidney Manual Lathe:20"
capacity:24" max swing over bed,16" swing
over cross slide
center dist:120"/10ft
Spindle bore:2"
chuck:4 jaw 12" dia
steady rest:10" dia max
spindle rpm:18-540
|
|
Ad # 4626 | General Purpose Lathe 15in. to 23in. swing |
1979 |
TOS |
SN-63 |
Good |
Sold |
Photo /
More Info. |
TOS SN63 Removable Gap Bed Lathe: Item # 3912 -- Basic Information
Category
Lathes
Sub-Category
Lathes, Gap Bed
Manufacturer
TOS
Model
SN63
Year
1979
Size
25"/34-1/2" x 120"cc
FOB
Baltimore, MD
Price
$ 12500.00
Item # 3912 -- Full Description
25”/34 ½” x 120”cc TOS SN63 Removable Gap Bed Lathe, new 1979
Maximum swing over bed 25”
Maximum swing over cross slide 13 ½”
Maximum swing in gap 34 ½”
Length of gap from spindle nose 15 ¼”
Spindle nose D1-8 Camlock
Spindle bore 2 ¾”
Size of centers No. 5 M.T.
Bed width 18”
Cross slide travel 16”
Top slide travel 7”
Tailstock spindle diameter 3 ½”
Tailstock spindle travel 9 ½”
16 spindle speeds 10-1000 RPM
Longitudinal feeds .002-.242 IPR
Cross feeds .001-.121 IPR
Thread range:
Inch 1-80 T.P.I.
Metric 0.5-4.0 mm
D.P. 2-72
Module 0.25-20
EQUIPPED WITH:
Removable gap bed
Induction hardened bedways
Swivel compound
T-slotted rear rest
D1-8 Camlock spindle
Inch/Metric threading
Thread dial
2-axes TRAK digital readouts
18in. diameter 4-jaw chuck
18in. diameter 3-jaw universal chuck with (6) sets of soft jaws
12” diameter capacity 3-point roller steady rest
Aloris toolpost with (10) holders and boring bar
Micrometer carriage stop
Pipe center
Pan bed and coolant
10 H.P. main drive motor
3/60/480 volt electrics
Condition: Good
Approximate weight: 7,400 lbs.
Floor space: 198”L x 57”W
Price: F.O.B. Truck, Baltimore, MD……………………….$12,500.00
|
|
Ad # 6967 | General Purpose Lathe 15in. to 23in. swing |
80's |
clausing |
Colechester 17" |
Good |
sold |
Photo /
More Info. |
17" swing x 100" centers W/ 3" spindle bore: 17" swing over ways, 10" over crossilde
100" cener distance
3" spindle bore
12" 3 jaw chuck
no tool post
10 HP
20-1600 RPM
|
|
Ad # 11684 | General Purpose Lathe 15in. to 23in. swing |
80's ? |
Nardini |
ND1585E |
Good |
sold |
Photo /
More Info. |
16"swingx 85" centers: Nardini Lathe 16 x 85"
16" swing over bed , 10" over cross slide
85" between centers
RPM: 25-2000
2" spindle bore
follow rest
inch/metric threads
|
|
Ad # 13608 | General Purpose Lathe 15in. to 23in. swing |
1965 |
Monarch |
610 |
Good |
sold |
Photo /
More Info. |
16" x 54": Monarch Model 610
16" x 54"
swing over crosslide: 10"
center distance 54"
2" Spindle Bore
220/3 Phase
12-1500 RPM
Steady Rest.
4 Jaw 12" Chuck
Chuck on Lathe does not Go with it.
|
|
Ad # 13930 | General Purpose Lathe 15in. to 23in. swing |
|
Victor |
1640 |
Good |
sold |
Photo /
More Info. |
16 x 40: Swing Over Bed 16
Swing In Gap 23
Swing Over Cross Slide 10
Distance Between Centerrs 40
Spindle Speeds (8) 60-1800
Spindle Nose D1-
6
Hole Thru Spindle 2”
Threads:
Inch (32)
Metric (25)
Feeds (32) 0.0025"-
0.0455"
Cross Slide Travel 9
1/2"
Tailstock Quill Taper #4
MT
Tailstock Quill Travel 6"
Dimensions (L x W x H) 80" x 50"
x 48"
Weight 3,500
Lbs.
Equipped with:
3 jaw chuck
5c collet closer Lever type
Yuasa Quick change tool post
Coolant system
|
|
Ad # 15494 | General Purpose Lathe 15in. to 23in. swing |
? |
Zubal |
C3 |
Good |
sold |
Photo /
More Info. |
16 Swing x 57" between centers: Zubal Manual Lathe
Model: C3
Capacity: 16" Swing x 57" between centers
Electrical: 220/3 phase
3 Jaw chuck 3" diameter
4 Jaw chuck 4" diameter (not pictured)
1 3/4" Spindle bore
Includes toolpost, holders, and gears |
|
Ad # 2127 | General Purpose Lathe 15in. to 23in. swing |
|
Leblond/Regal |
21" x 10Ft. |
Good |
sold |
Photo /
More Info. |
21" swing x 10Ft. centers manual lathe: leblond
21" swing x 10Ft. centers manual lathe
Long 12ft bed overall
21" swing over ways, 12" swing over cross
slide
2" spindle bore
English threads
Steady & follower rests
12" -4 jaw chuck
10HP
25-1000RPM
|
|
Ad # 13415 | General Purpose Lathe 15in. to 23in. swing |
|
Kingston |
HJ-1100 |
Good |
sold |
Photo /
More Info. |
18" Swing, 43.5" Centers: Kingston HJ-1100 lathe
in great working condition has 3 jaw and 4 jaw
chuck steady rest and tool post. standard and
metric threading Machine works great, can load for
free and you can see it run before you buy.
Swing over Bed (in.)18
Distance between Centers (in.)43-1/2
Spindle Bore (in.)2-1/4
Spindle Nose D1-6
Spindle Taper (with Sleeve) MT-6 (MT-4)
Number of Spindle Speeds 12
Range of Spindle Speeds (RPM)
35, 52, 75, 110,
160, 230, 330, 490,
650, 950, 1,350, 2,000
Number of Longitudinal Feeds 16
Range of Longitudinal Feeds (in./rev.) 0.0012 -
0.034
Number of Cross Feeds 16
Range of Cross Feeds (in./rev.) 0.008 - 0.023
Number of Inch Threads 44
Range of Inch Threads (T.P.I.) 2 - 72
Number of Metric Threads 39
Range of Metric Threads (mm) 0.2 - 14
Compound Slide Travel (max./in.) 5-7/8
Cross Slide Travel (max./in.) 10-2/5
Tailstock Quill Travel (max./in.) 5-7/8
Tailstock Quill Diameter (in.) 2-3/8
Tailstock Quill Taper MT-4
Leadscrew Diameter (in.) 1-3/8
Leadscrew Thread Pitch (T.P.I.) 4
Main Drive Motor 7-1/2 HP,
220V/440V/3 Phase/60 Hz.,
Prewired 220V
Floor Space Dimensions (in./L x W) 98 x 41
Net Weight (lbs.) 3,520
|
|
Ad # 12276 | General Purpose Lathe 15in. to 23in. swing |
2002 |
Nardini |
1585E |
Good |
sold |
Photo /
More Info. |
15"swing x 85"centers: Nardini lathe #1585E
15" x 85"
15 swing bed & 8" over crosslide
85" between centers
2" Spindle Bore
Inch and Metric Threads
3 Jaw 8"
4 Jaw 10"
2000 RPM Max
Gap Bed
steady rest
Follower rest
|
|
Ad # 2481 | General Purpose Lathe 15in. to 23in. swing |
|
Springfield |
|
Good |
sold |
Photo /
More Info. |
20 x 80: 20" swing;80" between centers; 1-7/8" thru hole; 360
RPM Pulley; 3 and 4 jaw chucks included |
|
Ad # 14272 | General Purpose Lathe 15in. to 23in. swing |
1950s? |
Warner Swasey |
No |
Good |
sold |
Photo /
More Info. |
7 -1/2" Spindle Bore: Warner Swasey-Warner Swasey # 4A big bore
Turret
Lathe:
22-1/2" Chuck 3 Jaw
7-1/2" Spindle Bore
30" swing over bed ways, 20" over half cross
slide
50" center distance
Spindle Bore :7-1/2"
22" Dia 3 jaw chuck W'/ 7.5" thru hole
RPM: 8-211
HP : 15?
6 position turret
rigging/loading fee 800.00 adder
|
|
Ad # 14281 | General Purpose Lathe 15in. to 23in. swing |
2007 |
GMC |
GT-1860DB |
Good |
sold |
Photo /
More Info. |
18" Swing x 60" Centers: GMC
Machine Standard Features and Equipment:
•ISO 9001 certified
•Large spindle bore 3-1/16”
•Heavy Duty spindle D1-8
•One-piece solid cast iron machine base
•Heavy Duty guideway width 11 13/16”
•Heavy Duty main motor 7.5HP
12 spindle speeds from 24-1,600 rpm, speeds: 24/
32/ 55/ 70 / 95/ 160 / 240/ 320/
550 / 700 / 950 / 1,600 rpm
•40 kinds of inch threads, and 41 kinds of
metric
threads
•Threading and feeding rate change without
changing gears
•Automatic kick-out longitudinal carriage stop
system
•Spindle is balanced, hardened and precision
ground
•Spindle is supported at 3-point by high
precision
bearings
•All gears and shafts are hardened and precision
ground
•Guideways induction hardened and precision
ground
•Automatic lubrication system in headstock and
feed box
GMC” Heavy Duty Gap Bed Lathes Specifications
model # GT-1860DB
Max. swing over bed 18”
Max. length of workpiece: 60”
Max. swing over cross slide: 11-5/16”
Max. Swing in gap: 25 3/16”
Width of Bed: 11 13/16”
Effective length in gap to spindle 10 ¼”
Effective length in gap to chuck jaws 3” Spindle
bore-1/16” , D1-8
Taper of spindle center M.T.# 6
Spindle speeds 24-1,600 rpm / 12 steps
24/32/55/70/95/160/240/320/550/700/950/1600 rpm
Longitudinal feeds 0.0012-0.0252 IPR, 42 kinds
Cross feed-0.0006-0.0126 IPR, 42 kinds Inch
threads 56-2TPI, 40 kinds
56,52,48,46,44,40,36,32,28,26,24,23,22,20,18,16,1
4
,13,12, 11-1/2, 11, 10, 9,8,7,6-1/2, 6, 5-3/4,
5-
1/2, 5, 4-1/2, 4, 3-1/2, 3-1/4, 3, 2-7/8, 2-3/4,
2-1/2, 2-1/4, 2
Metric threads 0.4-14 mm , 53 kinds
Module threads 0.4-7 mm, 32 kinds
Diameteral pitch threads 32-4 DP , 32 kinds
Max. travel of top slide 5”
Max. travel of cross slide 12”
4-way tool post 1” x 1”
Longitudinal leadscrew diameter / pitch1-1/2"/ /
4
PTI
Max. weight of workpiece 800 LBS
Max. travel of tailstock quill4-3/4”
Diameter of tailstock quill 2-1/8”
Taper of tailsotck quill center M.T. # 4
Main motor 5 HP, 220V/440V, 3 phase, prewired on
220V
Standard Equipment for Lathes # GT-1860DB:
•Taper turning attachment,& 5C collet closer
•10” 3-jsw chuck with set reversible jaws
•12” 6-jaw chuck with set reversible jaws
•16” Face plate
•10” drive plate
•5 1/2” large steady rest
•3” follow rest
•Removeable gap
•4-way tools post
•Foot brake
•Work light and coolant system
•Manual Lube pump on apron for all guideways
•Automatic kick-out longitudinal carriage stop
system
•Full length splash guard
•dead center and (1) reducing sleeve
•Thread chasing dial
includes: tooling/holders shown & 6 jaw chuck
shown plus 2 axis DRO acu-rite
Note: this machine is loaded up!!! |
|