| Year:
| 2008
|
| Make:
| Knuth
|
| Model:
| DM1000A
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: | 3500
|
| Dimension: L x W x H | 86”x38”x51” |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 2008 Knuth # DM1000A Manual Lathe
chuck: 10" 3 jaw & 12.5" 4 jaw
DRO:Newall 2 axis
spindle bore: 2-1/8"
includes: face plate,follow rest
toolpost w/4 holders
motor: 7.5 HP
Std MFg specs below:
M 1000 A Lathe with 2 axis Digital Read Out positioning system
• Large 2” spindle capacity
• Powerful 7.5Hp motor, 220V, 3ph, 60Hz
• Complete accessory set
• Adjustable slip clutch eliminates tooth breakage caused by overload conditions
• Foot brake for instant spindle stopping and shut off
• Chuck guard with shut-off interlock (spindle will not operate unless closed)
• Hardened and ground gears and shafts
• Heavy-duty, large-sized bed, hardened and precision ground
• Slide guide way adjustable through taper gibs
• Gapped bed with bridge
• Rear main spindle supported on tapered roller bearings and thrust bearings
• Forward main spindle supported on double-row cylindrical roller bearings
• Headstock runs in oil-bath
• ASA D1-6 Camlock mount
• Feed drive gears and apron run in oil-bath
Standard equipment:
• Position indicator
• 3-jaw chuck Ø 10”
• 4-jaw face plate chuck Ø 12.6”
• Face plate Ø 20”
• 4-station tool holder
• Coolant system
• Steady and follow rests
• Splatter guard
• Chuck guard
• Foot brake pedal
• Halogen work lamp
• Reducing sleeve
• 2 steady centers
• Operating tools
Optional Equipment:
• 5pc Quick Change Tool Holder set “WB” Article #103195
Specifications DM 1000 A:
Max. Turning diameter over bed: 16"
Max. Turning diameter over slide: 9.5"
Max. Turning diameter in gap: 23"Gap length:8"
Max. Turning length: 40"
Spindle Bore: 2"
Spindle taper: MT 6
Spindle mount: Camlock ASA D1-6
Spindle speeds (12 increments): 30 - 1600 rpm
Feeds: 115 total
- Longitudinal: 0.0015-0.041"
- Transversal: 0.0007-0.021"
Thread: Metric: (30 pitches) 0.45 - 20 mm
- Witworth inch: (35 pitches) 80 - 1 3/4 tpi
- Module: (25 pitches) 0.25 - 10 mm
- Diametrical: (30 pitches) 160 - 3 1/2 DP
Travels:
- Compound: 5.5"
- Cross slide: 9.4"
Tailstock quill: 5" travel
Tailstock quill taper: MT 4
Compound slide swivel range: ± 45°
Tailstock lateral adjustment range: ± 0.4"
Square tool shank: ¾” x ¾”
Dimensions (L x W x H): 86”x38”x51”
Weight: 3,200 Lbs
UL approval inspection sticker on side ,nice lathe was over 13K new!
|
| Electrical Description |
|
|
|
