| Year:
| 2007
|
| Make:
| GMC
|
| Model:
| GT-1860DB
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: | 6000
|
| Dimension: L x W x H | 108" x 41" x 58" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- GMC
Machine Standard Features and Equipment:
•ISO 9001 certified
•Large spindle bore 3-1/16”
•Heavy Duty spindle D1-8
•One-piece solid cast iron machine base
•Heavy Duty guideway width 11 13/16”
•Heavy Duty main motor 7.5HP
12 spindle speeds from 24-1,600 rpm, speeds: 24/
32/ 55/ 70 / 95/ 160 / 240/ 320/
550 / 700 / 950 / 1,600 rpm
•40 kinds of inch threads, and 41 kinds of
metric
threads
•Threading and feeding rate change without
changing gears
•Automatic kick-out longitudinal carriage stop
system
•Spindle is balanced, hardened and precision
ground
•Spindle is supported at 3-point by high
precision
bearings
•All gears and shafts are hardened and precision
ground
•Guideways induction hardened and precision
ground
•Automatic lubrication system in headstock and
feed box
GMC” Heavy Duty Gap Bed Lathes Specifications
model # GT-1860DB
Max. swing over bed 18”
Max. length of workpiece: 60”
Max. swing over cross slide: 11-5/16”
Max. Swing in gap: 25 3/16”
Width of Bed: 11 13/16”
Effective length in gap to spindle 10 ¼”
Effective length in gap to chuck jaws 3” Spindle
bore-1/16” , D1-8
Taper of spindle center M.T.# 6
Spindle speeds 24-1,600 rpm / 12 steps
24/32/55/70/95/160/240/320/550/700/950/1600 rpm
Longitudinal feeds 0.0012-0.0252 IPR, 42 kinds
Cross feed-0.0006-0.0126 IPR, 42 kinds Inch
threads 56-2TPI, 40 kinds
56,52,48,46,44,40,36,32,28,26,24,23,22,20,18,16,1
4
,13,12, 11-1/2, 11, 10, 9,8,7,6-1/2, 6, 5-3/4,
5-
1/2, 5, 4-1/2, 4, 3-1/2, 3-1/4, 3, 2-7/8, 2-3/4,
2-1/2, 2-1/4, 2
Metric threads 0.4-14 mm , 53 kinds
Module threads 0.4-7 mm, 32 kinds
Diameteral pitch threads 32-4 DP , 32 kinds
Max. travel of top slide 5”
Max. travel of cross slide 12”
4-way tool post 1” x 1”
Longitudinal leadscrew diameter / pitch1-1/2"/ /
4
PTI
Max. weight of workpiece 800 LBS
Max. travel of tailstock quill4-3/4”
Diameter of tailstock quill 2-1/8”
Taper of tailsotck quill center M.T. # 4
Main motor 5 HP, 220V/440V, 3 phase, prewired on
220V
Standard Equipment for Lathes # GT-1860DB:
•Taper turning attachment,& 5C collet closer
•10” 3-jsw chuck with set reversible jaws
•12” 6-jaw chuck with set reversible jaws
•16” Face plate
•10” drive plate
•5 1/2” large steady rest
•3” follow rest
•Removeable gap
•4-way tools post
•Foot brake
•Work light and coolant system
•Manual Lube pump on apron for all guideways
•Automatic kick-out longitudinal carriage stop
system
•Full length splash guard
•dead center and (1) reducing sleeve
•Thread chasing dial
includes: tooling/holders shown & 6 jaw chuck
shown plus 2 axis DRO acu-rite
Note: this machine is loaded up!!!
|
| Electrical Description |
|
|
|
