Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 14033 | General Purpose Lathe 15in. to 23in. swing |
1940 |
Monarch |
14" C |
Good |
sold |
Photo /
More Info. |
Swing: 16.5" x 30" between centers: Monarch Manual Lathe
Model: 14" C
Capacity: 16.5 Swing, 30" between centers
Electrical: 220/3 phase
1 3/4" thru head stock
16 Spindle speeds from 24-1000 rpm
Geared for chasing threads w/thread chasing dial
60 feed and threading speeds
5 HP
3 Jaw Chuck/4 Jaw chuck/collet head with 3/16,
1/4,5/16,3/8,7/16,1/2,9/16,5/8, and 1" collets
4 position Turret Tool Post
Aloris Type quick change tool post
Carbide insert tool holders for turning, (right,
left and straight) knurling tool, cut off tool,
boring bar holder
live ball bearing center
#6 MT - # MT adapter
3/4" drill chuck w/#6 MT for tail stock
|
|
Ad # 7195 | General Purpose Lathe 15in. to 23in. swing |
1987 |
CLAUSING METOSA |
C 2087 |
Excellent |
Sold |
No Photo /
More Info. |
20/30 3/8 x 87cc CLAUSING METOSA Gap Bed Lathe, Model C 2087: 20/30 3/8 x 87cc CLAUSING METOSA Gap Bed Lathe, Model C 2087
Center height 10 Ό
Max. swing over bed 20 7/8
Max. swing over carriage 18 7/8
Max. over cross slide 12 5/8
Bed width 13 Ύ
Gap length in front of faceplate 8 5/8
Spindle bore 3 5/32
Spindle nose D1-8 Camlock
Center taper No.5 M.T.
Cross slide travel 14
Compound rest travel 6 ½
Tailstock spindle diameter 2 7/8
Tailstock spindle travel 7
16 Spindle speeds 45-1600 RPM
55 Longitudinal feeds .0018-.052 IPR
55 Cross feeds .0005-.015 IPR
Thread range:
Inch 2-60 T.P.I.
Metric 0.5-15 MM.
Module .25-7.5
Diametral 4-120
EQUIPPED WITH:
Removable gap bed
Hardened bed ways
Inch/Metric dials
Swivel compound with T-Slot
Thread indicator
12 Dia. 3-jaw universal chuck
7 Ό Dia. Cap. 3 point plain steady rest
4 Position carriage stop
Headstock sleeve adapter
(2) Dead centers
(3) M.T. adapters
TRAK 102, 2-axes digital readout
Dorian quick-change tool post with (7) holders and
(3) boring bar holders
Chip pan, rear splash guard and coolant system
12 HP 3/60/230 Volt Main Drive motor w/ controls |
|
Ad # 12362 | General Purpose Lathe 15in. to 23in. swing |
|
precision latheSOUTH BEND |
|
Good |
sold |
Photo /
More Info. |
: 5C COLLET CLOSER 3 JAW CHUCK AMERICAN MADE QUICK CHANGE TOOL HOLDER DRILL C... |
|
Ad # 13416 | General Purpose Lathe 15in. to 23in. swing |
2004 |
Hwacheon |
HL-580 |
Excellent |
sold |
Photo /
More Info. |
23"swing, x 50" centers : Hwacheon 23x 50 Gap Bed Lathe
Hwacheon Gap Bed Lathe Model #HL580
23"swing over the bed x 50" between centers.
It will swing 32" in the gap.
It has 12 speeds 28-1350 rpm.
THREADS METRIC, D1-8 cam lock spindle,
#5MT tailstock, footbrake, coolant system, 8" steadyrest,
20"dia. 3jaw chuck, faceplate, tool post, micrometer carriage stop,
10 HP 220/440 volts. 3 Ph.
The base including the chip pan is all one piece of cast iron. This lathe is very heavy built. The Date of mfg is June 2004.
This lathe is near new condition with approximately 2 years use.
|
|
Ad # 11073 | General Purpose Lathe 15in. to 23in. swing |
|
Leblond |
|
Excellent |
Sold |
Photo /
More Info. |
15 swing, 32" between centers: Leblond, 15x32 Lathe, Total Cream Puff!!
Many years in this business, I have never seen a
Leblond so nice as this. It looks like it came out of
the crate today
.It arrives to you tooled up, ready
to work.
Check out the flaking on the ways. It is all-original.
I cant say this machine is perfect. It does have a
ding right near the chuck. It is not anywhere that
will interfere with anything, but it is there. You can
see it in the photos.
Having said that it is the nicest cleanest Leblond I
have ever seen
Much nicer in person than in the photos.
The Flaw: You know it cant be perfect
. There is
a ding on the flat ways near the chuck. You can see
it in the photos. It literally is in a spot that wont
interfere with anything. But I want you to know it is
there.
There is a nice assortment of tooling included with
this machine.
3 Jaw Chuck
Carriage Stop
Thread Dial
Aloris Toolpost
Centers
Drawbar
5C Collet Speed chuck and more!
Dont wait, machines this nice move fast!
We ship a lot of machines, So we get great rates on
shipping. Do not let shipping costs stop you from
looking at us. We want you to get the machine you
need from us!
This machine is physically located near Hartford,
CT.
Shipping: We will ship when your payment has
cleared your bank.
You are welcome to pick it up. We will load on to
your vehicle or the rigger of your choice. We do not
charge to load.
|
|
Ad # 12228 | General Purpose Lathe 15in. to 23in. swing |
|
Leblond |
20" x 60" |
Good |
sold |
Photo /
More Info. |
20" x 60" : Leblond
20" x 60"
3 Jaw Chuck 15"
4 Jaw Chuck 18"
8-1000 RPM
Voltage 440/3 Phase
1" 1/2 Spindle Bore |
|
Ad # 16092 | General Purpose Lathe 15in. to 23in. swing |
|
Leblond |
15 x 36 |
Good |
sold |
Photo /
More Info. |
15 x 36": Leblond lathe 15"swing x 36" bed
Swing over cross slide=9"
8" 3 jaw chuck & 10" 4 jaw chuck
Taper attachment
No toolpost
|
|
Ad # 5217 | General Purpose Lathe 15in. to 23in. swing |
|
COLCHESTER |
8000 |
Good |
Sold |
Photo /
More Info. |
15"x 50" COLCHESTER 8000 Engine Lathe, : Specifications:
Swing over Bed 15-1/2"
Swing over Cross-Slide 9-1/2"
Distance between Centers 50"
Spindle Speeds (16) 25 to 2000 RPM
Spindle Mount D1-6 Camlock
Spindle Bore 2"
Feeds(Range) (15) .0015 to .040 IPR
Threads(Range-Inch) (45) 2 to 72 TPI
Threads (Range-Metric) (39) .2 to 14 mm
Tailstock Taper #4 MT
Motor 230V 3PH 60C
Dimensions 38" X 95"
Accessories Included 10" 3-Jaw BUCK Adjustrue Chuck, 5C Lever Collet Closer, 12" 4 Jaw Chuck, Taper Attachment, Quick Change Toolpost, Drill Chuck, Trav-A-Dial, Coolant
|
|
Ad # 13128 | General Purpose Lathe 15in. to 23in. swing |
|
Leblond |
Regal |
Excellent |
sold |
Photo /
More Info. |
17x 66: Leblond 17" x 66" Regal Engine Lathe
Specifications:
Serial: 2D586
Maximum Swing Over Bed: 17-3/4"
Maximum Swing Over Cross Slide: 10-3/4"
Distance Between Centers: 66"
Spindle Speeds: (12) 25 to 1000 RPM
Spindle Nose: L-0
Spindle Hole: 1-17/32"
Threads: (48) 2 to 112 TPI
Feed Range: (48) .002" to .116"
Cross Slide Travel: 9-5/8"
Compound Rest Travel: 4-3/8"
Tailstock Spindle Diameter: 2-7/16"
Tailstock Spindle Travel: 7"
Tailstock Spindle Center: No. 4 Morse Taper
Motor: 5 HP 220/440 3 Phase 60 HZ
Equipped With:
(1) 10" 3 Jaw Chuck
(1) 12" 4 Jaw Chuck
(1) 16" Diameter Face Plate
(1) 6" Capacity Steady Rest
*All Specifications Are Subject To Verification
By
Purchaser*
Shipping:
All freight arrangements are to be made by the
purchaser. Local pickup is available and we can
load onto your truck free of charge.
|
|
Ad # 4820 | General Purpose Lathe 15in. to 23in. swing |
|
Marshall |
1810 |
Very Good |
Sold |
Photo /
More Info. |
18" x 40" Marchall Engine Lathe: Includes:
3-Jaw Chuck
4-Jaw Chuck
Steady Rest
Foot Pedal |
|
Ad # 7858 | General Purpose Lathe 15in. to 23in. swing |
|
Clausing/Colchester |
15 x 50 |
Good |
Sold |
Photo /
More Info. |
15" x 50" Clausing Engine Lathe: Swing Over Bed: 15"
DBC: 50"
8" 3-Jaw Chuck
6" 4-Jaw Chuck
Spindle Bore: 2"
Spindle Speeds: 37 - 1,500 rpm
Quick Change Tool Post
Taper Attachment
|
|
Ad # 9017 | General Purpose Lathe 15in. to 23in. swing |
|
|
|
Excellent |
sold |
Photo /
More Info. |
18 X 64": |
|
Ad # 11032 | General Purpose Lathe 15in. to 23in. swing |
|
American Zip Shift |
Engine Lathe |
Very Good |
sold |
Photo /
More Info. |
21" x 78" lathe: American Zip Shift Engine Lathe, Reads 16 x 78 actual 21 inch swing and 78 ... |
|
Ad # 5949 | General Purpose Lathe 15in. to 23in. swing |
1978 |
TARNOW |
TUJ-50 |
Good |
Sold |
Photo /
More Info. |
22/31 ½ x 118cc TARNOW TUJ-50 Removable Gap Bed Lathe: 22/31 ½ x 118cc TARNOW TUJ-50 Removable Gap Bed Lathe
Swing over bed 22.05
Swing through gap 31.5
Length of gap 9.84
Swing over carriage 14.57
Width of bed 14.57
Distance between centers 118.1
Headstock spindle bore 2-3/8
Headstock spindle nose D1-6 Camlock
Tailstock quill diameter 3 Ό
Tailstock quill travel 7
Tailstock taper in quill No. 5 M.T.
18 Spindle speeds 35.5-1800 RPM
49 Longitudinal feeds .0007-.88 IPR
49 Cross feeds .00035-.44 IPR
Thread range:
Inch 2-56 T.P.I.
Metric .045-28 mm.
EQUIPPED WITH:
Removable gap bed
Induction hardened bed ways
15 dia. 3-jaw universal chuck
14 dia. 4-jaw chuck
Drive plate
Swivel compound
Inch/metric threading with (21) change gears
Camlock spindle nose
Swing chuck guard
T-slotted rear rest
Thread dial
6 dia. cap. 3-point roller steady rest
Aloris toolpost
(2) Back plates
(2) Dead centers
Pipe center
Chip pans
10 H.P. main drive motor
3/60/230 volt electrics
|
|
Ad # 7624 | General Purpose Lathe 15in. to 23in. swing |
|
Hendy |
18 x 90 |
Fair |
sold |
Photo /
More Info. |
18" x 90" Hendy Engine Lathe with Options: 14" 3-Jaw Chuck
Spindle Speeds: 16 - 570 rpm
Tailstock with positioning crank
2 Steady Rests
There MIGHT also be a 4-Jaw chuck included if it can be located |
|
Ad # 12742 | General Purpose Lathe 15in. to 23in. swing |
|
Hercules |
1660 |
Good |
sold |
Photo /
More Info. |
16" x 60": Hercules 1660 Lathe
16" x 60"
3" 1/4 Spindle Bore
Taper Attachment
Gap Bed
Rapid Travers
Foot Brake
3 Jaw 10" Chuck
4 Jaw 12" Chuck
20" Face Plate
Inch and metric Threads |
|
Ad # 14192 | General Purpose Lathe 15in. to 23in. swing |
1982 |
San Yuen |
Sag 2500 |
Good |
sold |
Photo /
More Info. |
18" x 60": San Yuen Lathe 18" x 60"
35-1500 RPM
220 Volt 3 Phase
18" x 60"
10" over cross slide
2" 1/2" spindle bore
4 Jaw 12" Chuck
Steady Rest
Inch/Metric Threads
|
|
Ad # 9116 | General Purpose Lathe 15in. to 23in. swing |
1956 |
axelson |
|
Excellent |
SOLD |
Photo /
More Info. |
18 swing x 54 centers: MAXIMUM SWING OVER BEDWAYS: 18"
MAXIMUM SWING OVER CROSS SLIDE: 12"
MAXIMUM DISTANCE BETWEEN CENTERS: 54"
SPINDLE HOLE: 1-9/16"
SPINDLE NOSE: D-1-6"
SPINDLE SPEEDS: (24) 13 TO 1577 RPM
FEEDS: (54) .0027" TO .1655" PER REV.
THREADS: (54) 1-1/2 TO 92 TPI
CROSS SLIDE TRAVEL: 10-5/8"
COMPOUND REST TRAVEL: 4-3/4"
TAILSTOCK SPINDLE DIAMETER: 2-7/8"
TAILSTOCK SPINDLE TRAVEL: 9"
TAILSTOCK SPINDLE CENTER: NO. 4 MT
WIDTH OF BED: 16-7/8"
MOTOR: 10 HP 220/440/3/60
EQUIPPED WITH:
TAPER ATTACHMENT
HARDWAYS
THREAD DIAL
TAILSTOCK
OAD: 131" L-R X 47" F-B X 56" HIGH
APPROX. WEIGHT: 5,400 LBS. |
|
Ad # 9352 | General Purpose Lathe 15in. to 23in. swing |
1989 |
Okuma |
22 x 36 |
Very Good |
Sold |
Photo /
More Info. |
22 swing x 36 in centers: 22"swing over ways , 14" swing over cross slide
36" between centers
2-1/4" spindle bore
8" 3 jaw chuck
12" 4-jaw chuck
200-2200 RPM
light
steady & follower rests
2 axis DRO
metric machine |
|
Ad # 5414 | General Purpose Lathe 15in. to 23in. swing |
|
Lodge & Shipley |
Blue Chip 21 |
Good |
Sold |
Photo /
More Info. |
21" x 120" Gap Bed Lathe: Distance Between Centers: 120"
Swing Over Bed: 21-1/2"
Swing Over Cross Slide: 14-3/4"
Swing Over Gap: 36"
Distance from Spindle Nose to Start of Gap: 5-1/2"
Distance from Spindle Nose to End of Gap: 12-1/4"
Gap Casting Included
Bed Width: 15-3/4"
3-Jaw 15" Chuck
Spindle Nose: 11", D1
Spindle Bore: 3-1/2" diam.
Spindle Power: 12.5 hp
Spindle Speeds: 20 - 1,000 rpm
Spindle Speed Steps:
12 steps via a "Quick Change" Gear Box
Tail Stock with MT 5 Live Center
Steady Rest with Rollers: 12"
Steady Rest: 8"
Inch/Metric Threading
4-Way Tool Block |
|
Ad # 15312 | General Purpose Lathe 15in. to 23in. swing |
1980s |
Nardini |
1785E |
Good |
sold |
Photo /
More Info. |
17" x 85": Nardini 1785E
10" 3 Jaw
Height of Centers8 5/8"
Distance Between Centers 86"
Swing over Bed:17 5/16"
Swing over Wings of Saddle:15 3/8"
Swing over Cross Slide:10 5/8"
Cross Slide Trave:l9 7/8"
Top Slide Trave:l5"
Tool Section:3/4" x 3/4"
Bed Width:10 5/8"
Bed Height:12 5/8"
Spindle Nose:D1-6"
Spindle Bore:2 1/32"
Spindle Internal Taper:1:20
Taper in Reduction Sleeve:4 MT
Spindle Speeds (18)25-2000
Quill Diameter:2 3/8"
Quill Taper:8 5/8"
Quill Internal Taper:4 MT
Lateral Adjustment:5/8"
Number of Threads:216
Metric Threads (54) 0.40-18.472
Inch Threads (54)42-2 3/4"
Module Threads (54).02-3.5
Diametral Pitch Threads (54)84-3
Pitch of Leadscrew4
Number of Feeds:264
Cross Feeds (132)0.0010-0.0488 in/rev
Longitudinal Feeds (132)0.0021-0.0976
in/rev
Motor8/4 HP
Coolant Unit Motor:1/8 HP
Dimensions:146" x 40"
Height:58"
Weight4220 lbs. |
|
Ad # 6474 | General Purpose Lathe 15in. to 23in. swing |
|
MONARCH |
612 |
Very Good |
sold |
Photo /
More Info. |
20΄΄ X 78΄΄ MONARCH ENGINE LATHE: 20΄΄ X 78΄΄ MONARCH ENGINE LATHE:
SWING OVER WAYS ............... 21΄΄
SWING OVER CROSS SLIDE ........ 13΄΄
DISTANCE BETWEEN CENTERS ...... 78΄΄
SPINDLE SPEEDS ................ (36) 12 TO 1500 RPM
FEEDS ......................... (66) .0011 TO .0683 IPR
THREADS ....................... (66) 2 TO 120 TPI
DIAMETER OF SPINDLE HOLE ...... 2-1/8΄΄
CHUCK ......................... 12΄΄ 4-JAW CHUCK WITH 2 PIECE JAWS
THREAD DIAL ................... YES
FOLLOW REST ................... YES
MOTOR ......................... 15 HORSEPOWER MAIN MOTOR |
|
Ad # 14855 | General Purpose Lathe 15in. to 23in. swing |
2008 |
Knuth |
DM1000A |
Good |
sold |
Photo /
More Info. |
16" swing x 40" centers: 2008 Knuth # DM1000A Manual Lathe
chuck: 10" 3 jaw & 12.5" 4 jaw
DRO:Newall 2 axis
spindle bore: 2-1/8"
includes: face plate,follow rest
toolpost w/4 holders
motor: 7.5 HP
Std MFg specs below:
M 1000 A Lathe with 2 axis Digital Read Out positioning system
Large 2 spindle capacity
Powerful 7.5Hp motor, 220V, 3ph, 60Hz
Complete accessory set
Adjustable slip clutch eliminates tooth breakage caused by overload conditions
Foot brake for instant spindle stopping and shut off
Chuck guard with shut-off interlock (spindle will not operate unless closed)
Hardened and ground gears and shafts
Heavy-duty, large-sized bed, hardened and precision ground
Slide guide way adjustable through taper gibs
Gapped bed with bridge
Rear main spindle supported on tapered roller bearings and thrust bearings
Forward main spindle supported on double-row cylindrical roller bearings
Headstock runs in oil-bath
ASA D1-6 Camlock mount
Feed drive gears and apron run in oil-bath
Standard equipment:
Position indicator
3-jaw chuck Ψ 10
4-jaw face plate chuck Ψ 12.6
Face plate Ψ 20
4-station tool holder
Coolant system
Steady and follow rests
Splatter guard
Chuck guard
Foot brake pedal
Halogen work lamp
Reducing sleeve
2 steady centers
Operating tools
Optional Equipment:
5pc Quick Change Tool Holder set WB Article #103195
Specifications DM 1000 A:
Max. Turning diameter over bed: 16"
Max. Turning diameter over slide: 9.5"
Max. Turning diameter in gap: 23"Gap length:8"
Max. Turning length: 40"
Spindle Bore: 2"
Spindle taper: MT 6
Spindle mount: Camlock ASA D1-6
Spindle speeds (12 increments): 30 - 1600 rpm
Feeds: 115 total
- Longitudinal: 0.0015-0.041"
- Transversal: 0.0007-0.021"
Thread: Metric: (30 pitches) 0.45 - 20 mm
- Witworth inch: (35 pitches) 80 - 1 3/4 tpi
- Module: (25 pitches) 0.25 - 10 mm
- Diametrical: (30 pitches) 160 - 3 1/2 DP
Travels:
- Compound: 5.5"
- Cross slide: 9.4"
Tailstock quill: 5" travel
Tailstock quill taper: MT 4
Compound slide swivel range: ± 45°
Tailstock lateral adjustment range: ± 0.4"
Square tool shank: Ύ x Ύ
Dimensions (L x W x H): 86x38x51
Weight: 3,200 Lbs
UL approval inspection sticker on side ,nice lathe was over 13K new! |
|
Ad # 12318 | General Purpose Lathe 15in. to 23in. swing |
1980s |
Sharp |
1882S |
Good |
sold |
Photo /
More Info. |
3" Spindle Bore 18" x 82" : Sharp Lathe 1882S
18"swing x 85" centers
10"swing Over Crosslide
Gap Bed
3" Spindle Bore
3- Jaw 12" Chuck
26-1500 RPM
inch/Metric Threads
Voltage wired 440 |
|
Ad # 14621 | General Purpose Lathe 15in. to 23in. swing |
2007? |
Summit |
1660B |
Good |
sold |
Photo /
More Info. |
: Summit heavy duty 1660B lathe
16" swing over bed ways,9.3"over cross slide
center distance: 60"
spindle speed: 20-2000 RPM
spindle: D1-8?
tailstock: 5MT
10HP main motor
coolant
gap bed : 25" swing in gap
3" spindle bore
inch/metric threads
newall dro system-2 axis
rapid traverse
taper attachment
10" 3 jaw chuck
Standered Features
Clutched headstock
All cast iron construction
Hardened & precision ground bedways
Quick change gearbox cuts American (inch),
metric and module and diametrical pitch threads
Rapid traverse on carriage (4 way joystick)
2 Speed tail stock
Large chrome alloy spindle with big 3″ thru hole
Hardened and ground alloy steel gears, shafts
and splines
|
|
Ad # 14147 | General Purpose Lathe 15in. to 23in. swing |
|
Monarch |
|
Fair |
sold |
Photo /
More Info. |
18" X 96": 18" X 96"
14" swing over carriage
1- 12" 3 jaw chuck
1- 14" 4 jaw chuck
3 hp electric motor
|
|
Ad # 7180 | General Purpose Lathe 15in. to 23in. swing |
|
Enco |
111-3320 |
Very Good |
Sold |
Photo /
More Info. |
14" x 40" Enco Manual Lathe with 2-axis DRO: Accurite 2-axis DRO
14" swing Over Bed
8-5/8" swing Over Cross Slide
40" distance Between centers
20" swing Over gap
16 Spindle Speeds
90-1800 RPM Range of Spindle Speeds
1-1/2" Hole Through Spindle
MT#5 Taper of Spindle Bore
MT#3 Tailstock Quill Taper
4-1/2" Tailstock Quill Travel
7" Cross Slide Travel
22 Number Of Metric Threads
.45-7.5MM Range of Metric Threads
40 Number of Inch Threads
4-112 TPI Range of Inch Threads
(40) .0012-.0294 in/rev. Longititudinal Feeds
(40) .0003-.010 in/rev. Cross Feeds |
|
Ad # 7200 | General Purpose Lathe 15in. to 23in. swing |
1954 |
LEBLOND |
|
Good |
Sold |
No Photo /
More Info. |
20 x 15cc LEBLOND Heavy Duty Engine Lathe: 20 x 15cc LEBLOND Heavy Duty Engine Lathe
Max. swing over bed ways 23 Ύ
Max. swing over compound rest 14 ½
Spindle bore 2
Spindle nose L-2
Center size No.5 M.T.
Bed width 21 3/8
Cross slide travel 14 ½
Compound rest travel 4
Tailstock spindle travel 12
32 Spindle speeds 9-800 RPM
60 Feeds .004-.250 IPR
Thread range 1-60 T.P.I.
EQUIPPED WITH:
Hardened replaceable steel bed ways
Swivel compound
Taper turning attachment
Rapid traverse attachment
Rapid traverse to carriage
L-2 nose
4-jaw chuck
Aloris tool post with (11) holders
(2) live centers
Drill chuck
Misc. tooling
15 Dia. cap. plain steady rest
8 Dia. cap. plain steady rest
Boring bar holder w/ boring bar
Pan bed and coolant
20 H.P. 3/60/220-440 Volt Motor w/ controls
Wired for 3/ Volt operation |
|
Ad # 2926 | General Purpose Lathe 15in. to 23in. swing |
|
Lodge & Shipley |
18" |
|
Sold |
Photo /
More Info. |
18" Lodge & Shipley: |
|
Ad # 5929 | General Purpose Lathe 15in. to 23in. swing |
1981 |
ENTERPRISE |
1550 |
Very Good |
sold |
Photo /
More Info. |
15/ 21 ½ x 50 cc ENTERPRISE Geared Head Gap bed lathe: 15/ 21 ½ x 50 cc ENTERPRISE Geared Head Gap bed lathe
Max. swing over bed 15
Max. swing through gap 21 ½
Length of gap in front of faceplate 5 ½
Max. swing over cross slide 9 7/16
Spindle bore 1 9/16
Spindle nose D-1-4 Camlock
Center size No. 3 M.T.
Cross slide travel 8 ½
Tailstock spindle diameter 1 31/32
Tailstock spindle travel 5 ½
Bed width 9 ½
16 Spindle Speeds 45-2000 RPM
40 Longitudinal .0015-.0216 IPR
40 Cross feeds .0006-.009 IPR
Thread Range:
Inch 4-60 T.P.I.
Metric .5-7.5 mm.
EQUIPPED WITH:
Geared head
Flame hardened bed-ways
Swivel compound
Inch/Metric threading
Removable gap bed
T-slotted rear rest
Thread indicator
Hand collet closer with nose
D 1-4 Camlock spindle nose
15 Dia. faceplate
8 Dia. 3-jaw universal chuck
1-axis Anilam D.R.O. (cross travel)
4 Dia. capacity 3-point plain steady rest
Foot brake
Pan bed
5 H.P. 3/60/220 Volt Motor with controls
|
|
Ad # 6472 | General Purpose Lathe 15in. to 23in. swing |
|
AMERICAN |
|
Very Good |
SOLD |
Photo /
More Info. |
19΄΄ X 78΄΄ AMERICAN ENGINE LATHE: 19΄΄ X 78΄΄ AMERICAN ENGINE LATHE:
SWING OVER WAYS ................. 19΄΄
SWING OVER CROSS SLIDE .......... 11΄΄
DISTANCE BETWEEN CENTERS ........ 78΄΄
SPINDLE SPEEDS .................. (27) 30 TO 2000 RPM
FEEDS ........................... (66) .0015 TO .0913
THREADS ......................... (66) 2 TO 120 TPI
DIAMETER OF SPINDLE HOLE ........ 2΄΄
CHUCK ........................... 15΄΄ 3 JAW
THREAD DIAL ..................... YES
HARDEN WAYS ..................... YES
FORWARD & REVERSING ............. YES
COOLANT WITH CHIP PANS .......... YES
MOTOR ........................... 15 HORSEPOWER |
|
Ad # 12841 | General Purpose Lathe 15in. to 23in. swing |
1992 |
Shenyang |
SK16A |
Good |
sold |
Photo /
More Info. |
: Gap Bed Engine Lathe
16" x 60"
Make:Shenyang
12" Chuck 3 Jaws
Foot Brake
Metric and Inch Threads
|
|
Ad # 15312 | General Purpose Lathe 15in. to 23in. swing |
1980s |
Nardini |
1785E |
Good |
sold |
Photo /
More Info. |
17" x 85": Nardini 1785E
10" 3 Jaw
Height of Centers8 5/8"
Distance Between Centers 86"
Swing over Bed:17 5/16"
Swing over Wings of Saddle:15 3/8"
Swing over Cross Slide:10 5/8"
Cross Slide Trave:l9 7/8"
Top Slide Trave:l5"
Tool Section:3/4" x 3/4"
Bed Width:10 5/8"
Bed Height:12 5/8"
Spindle Nose:D1-6"
Spindle Bore:2 1/32"
Spindle Internal Taper:1:20
Taper in Reduction Sleeve:4 MT
Spindle Speeds (18)25-2000
Quill Diameter:2 3/8"
Quill Taper:8 5/8"
Quill Internal Taper:4 MT
Lateral Adjustment:5/8"
Number of Threads:216
Metric Threads (54) 0.40-18.472
Inch Threads (54)42-2 3/4"
Module Threads (54).02-3.5
Diametral Pitch Threads (54)84-3
Pitch of Leadscrew4
Number of Feeds:264
Cross Feeds (132)0.0010-0.0488 in/rev
Longitudinal Feeds (132)0.0021-0.0976
in/rev
Motor8/4 HP
Coolant Unit Motor:1/8 HP
Dimensions:146" x 40"
Height:58"
Weight4220 lbs. |
|
Ad # 10274 | General Purpose Lathe 15in. to 23in. swing |
|
summit |
23460 |
Good |
Sold |
Photo /
More Info. |
20 " swing x 14ft centers: 21" 4 jaw chuck
20" swing over ways, 16" over cross slide
inch/metric threading
spindle bore: 4"
steady rest
QC toolpost
14ft centers
rapid traverse
rpm: 20-1500 |
|
Ad # 6807 | General Purpose Lathe 15in. to 23in. swing |
1966 |
Monarch |
62, 2013 x 54 |
Very Good |
SOLD |
Photo /
More Info. |
20" x 54" Monarch Engine Lathe: Swing Over Bed: 20"
Swing Over Saddle: 13"
Distance Beteen Centers: 54"
Bed Length: 80"
Spindle Bore: 2"
Spindle Motor: 25 hp
Spindle Speeds: 14 - 1,750 rpm (see note on speed selection below)
Inch Threading |
|
Ad # 15959 | General Purpose Lathe 15in. to 23in. swing |
1997 |
YANG |
19 x 60 |
Good |
sold |
Photo /
More Info. |
19" x 60": 1997 Yang "cadillac" 19 x 60" manual lathe
19" swing over bed
60" between centers
Comes with:
Newall DRO
10" Bison 3 jaw chuck
16" face plate
10" back plate
Steady Rest
Follow Rest
12" Bison 4 jaw chuck and Aloris tool post
is available for an additional cost.
This Lathe is in very good condition,super
nice/clean..ready to go
Add loading fee approx: $750.00 onto flat bed
|
|
Ad # 12436 | General Purpose Lathe 15in. to 23in. swing |
|
Sanynen |
NG 1850A |
Good |
sold |
Photo /
More Info. |
18" x 50": Sanynen NG 1850
3 Jaw Chuck 7" 1/2"
18" x 50"
60-1500 Rpm
Steady Rest 3"
Spindle Bore 1" 1/2"
Foot Brake
|
|
Ad # 16085 | General Purpose Lathe 15in. to 23in. swing |
2006 |
kingston |
hd2260 |
Good |
sold |
Photo /
More Info. |
22 x 60": 2006 model HD2260 Kingston manual lathe
Good condition 4 jaw chuck, 4" spindle hole |
|
Ad # 11507 | General Purpose Lathe 15in. to 23in. swing |
1943 |
Monarch |
? |
Good |
sold |
Photo /
More Info. |
16 x 48: Monarch
16" x 48"
Taper
Tooling
3 Jaw 9 inch Chuck Shown
4 Jaw 12 inch Comes with
Steady Rest
22 x 487 RPM |
|
Ad # 9805 | General Purpose Lathe 15in. to 23in. swing |
2001 ? |
ACER |
1740G |
Very Good |
Sold |
Photo /
More Info. |
ACER DYNAMIC 1740G Engine Lathe: 17" swing
40" centers
center height 8 1/2"
swing over bed 17"
swing over cross slide 9 5/8"
spindle bore diameter 2 1/4"
distance between centers 40"
3-jaw chuck
14" face plate
Steady rest (.6" - 7")
4-way tool post
Coolant system
Full length splash guard
Chuck guard with emergency stop
Halogen work light
Sony 2 axis DRO
|
|
Ad # 14931 | General Purpose Lathe 15in. to 23in. swing |
? |
Leblond |
Regal |
Good |
sold |
Photo /
More Info. |
16" x 54": Leblond Regal manual engine lathe #3B
15" swing over bed ,8" over c ross slide
spindle bore: 1-3/4"
chuck: 8" 3 jaw
threading:english std. threading only
taper attachment
steady rest: 4" max
CA toolpost w/ 5 holders
RPM: 30-1200
220/3
some minor acc tooling included |
|
Ad # 4638 | General Purpose Lathe 15in. to 23in. swing |
1988 |
TOS |
SUI-50 |
Excellent |
Sold |
Photo /
More Info. |
20" x 80" cc Model SUI-50 TOS Manual Lathe: Item # 3175 -- Basic Information
Category
Lathes
Sub-Category
Lathes, Manual
Manufacturer
TOS
Model
SUI-50
Year
1988
Size
20 x 80cc
FOB
F.O.B. Truck, Wilmington, DE.
Price
$ 12500.00
Item # 3175 -- Full Description
20 x 80cc Model SUI-50 TOS Lathe, new 1988
Maximum swing over bed 20
Maximum swing over bed recess 22
Maximum swing over cross slide 12.6
Spindle bore 2.2
Tailstock spindle diameter 3.15
18 spindle speeds 14 to 2240 RPM
42 longitudinal feeds .0009 to .189 IPR
42 cross feeds .0004 to .095 IPR
Rapid traverse rates:
longitudinal 138 IPM
cross 69 IPM
Thread range
inch ½ to 120 TPI
metric .25 to 60mm
diametral 0.125 to 15mm
module 2 to 240mm
Equipped with:
Hardened ways
Swivel compound
Inch/metric threading
Thread dial
Micrometer carriage stop
Adjustable cross production stop
16 diameter 4-jaw chuck (new) with extra set of jaws
10 diameter 3-jaw universal chuck with extra jaws
Camlock spindle nose
4-way power rapid traverse
Rear T-slotted tool rest
5 ½ diameter capacity plain steady rest
Plain follow rest
Built-in 4-way tool post
Work light
Pan bed and coolant with splash guards
Live center
Dead center for head stock
10 H.P. 3/50/380 volt motor
Input voltage: 3/50/380 volt
Approximate weight: 6,550 lbs
Dimensions: 141L x 51W x 57High
Condition: excellent
PRICE: F.O.B. Truck, Wilmington, DE
$12,500.00
|
|
Ad # 12097 | General Purpose Lathe 15in. to 23in. swing |
1965 |
leblond |
regal |
Good |
sold |
Photo /
More Info. |
19"swing x 72"centers: leblond lathe
19inch swing 72 center,
1 3/4 hole in spindle
3 jaw chuck,
steadyrest quick change threading,
5 horsepower 480 3 phase,
ways are in very good condition,
no 3 phase to the in my new shop |
|
Ad # 8567 | General Purpose Lathe 15in. to 23in. swing |
? |
cincinnati |
Hydra-Shift |
Very Good |
sold |
Photo /
More Info. |
19 x 54: Cincinnati Hydra-Shift Lathe 19x54
19''swing
between centers 51-60''
hole thru spindle 1 3/4 |
|
Ad # 8206 | General Purpose Lathe 15in. to 23in. swing |
80's? |
LONGEM |
LG 2060-D |
Good |
sold |
Photo /
More Info. |
20" x 60" Heavy Duty Engine Lathe: Swing: 20"over ways, 11 in over crosslide
3-1/4" spindle bore
DBC: 60"
Spindle Speeds: 28 - 1,600 rpm
Spindle Bore: 3-1/8"
Chuck" 12" 3-Jaw Chuck
Steady Rest
Follow Rest
Tailstock
Inch/Metric Threading
Work Light
|
|
Ad # 11574 | General Purpose Lathe 15in. to 23in. swing |
1980s |
Profitmaster |
16 x 80 |
Very Good |
sold |
Photo /
More Info. |
16 x 80 : Profit Master
16" x 80"
Taper Attachment
Steady rest
Tail Stock
3 Jaw 12 inch Chuck
4 Jaw 12 inch Chuck
Digital Readout (needs calibration)
25-2000 RPM
2 inch Spindle Bore
Inch and metric Threads
Coolent |
|
Ad # 8780 | General Purpose Lathe 15in. to 23in. swing |
1959 |
Monarch |
10EE |
Very Good |
Sold |
Photo /
More Info. |
10x20": Monarch 10EE
Updated Electronics
New Readouts
10x20
Nice Unit
TERMS AND CONDITIONS:
SPECIFICATIONS AND EQUIPMENT SUBJECT TO VERIFICATION WITH CORPORATE APPROVAL
FULL PAYMENT DUE PRIOR TO MACHINE PREPARATION FOR SHIPMENT
SUBJECT TO AVAILABILITY
|
|
Ad # 11858 | General Purpose Lathe 15in. to 23in. swing |
|
Turnmaster |
17"-5 |
Excellent |
sold |
Photo /
More Info. |
17" swing x 40" between centers: Used turnmaster 17" lathe
swing over bed:17"
swing over cross slide:
center distance: 40"
Gap bed with 2 1/8" spindle bore thru
Has taper attachment
new acu-rite turnmate readout. |
|
Ad # 1744 | General Purpose Lathe 15in. to 23in. swing |
|
Hiernault Somua |
23swing x 60"centers |
Very Good |
sold |
Photo /
More Info. |
Heavy duty Engine Lathe: Totally Metric
Coolant
23" Swing x 60" Centers |
|
Ad # 9712 | General Purpose Lathe 15in. to 23in. swing |
70s |
keiyoseiki |
kg1000 |
Good |
sold |
Photo /
More Info. |
18x40 10"chuck: 18"swing
1/2"live centertail stock is jacobs #33
'tool post holder 2"thru hole |
|
Ad # 4759 | General Purpose Lathe 15in. to 23in. swing |
|
LEBLOND |
HEAVY DUTY LATHE |
Excellent |
Sold |
Photo /
More Info. |
16" x 58" LEBLOND HEAVY DUTY LATHE: MAXIMUM SWING OVER BEDWAYS: 15-1/2"
DISTANCE BETWEEN CENTERS: 58"
SPINDLE SPEEDS: 30 TO 1200 RPM
SPINDLE HOLE: 1-1/2"
BED WIDTH: 12-3/16"
CROSS SLIDE TRAVEL: 7-7/8"
COMPOUND REST TRAVEL: 3-7/8"
FEED RANGE: (48) .0018 TO .104 IPR
THREADS: (48) 4 TO 224 TPI
LEADSCREW DIAMETER: 1-3/16"
TAILSTOCK SPINDLE DIAMETER: 1-15/16"
TAILSTOCK CENTER TAPER: NO. 3 MT
TAILSTOCK SPINDLE TRAVEL: 5"
MOTOR: 7.5 HP |
|
Ad # 15337 | General Purpose Lathe 15in. to 23in. swing |
na |
voest |
|
Good |
sold |
Photo /
More Info. |
18 inch swing 60 inch centers: 18"swing x 50" centers
voest lathe 1-7/8 thru hole,
tailstock |
|
Ad # 16083 | General Purpose Lathe 15in. to 23in. swing |
1979 |
Deemore |
|
|
sold |
Photo /
More Info. |
36 x 90": 1979 model Demoore tracer lathe
36" swing x 90" BC,
Front rear 4 jaw chuck,
9.5" spindle bore,
Automatic threading, |
|
Ad # 12929 | General Purpose Lathe 15in. to 23in. swing |
|
Century |
|
|
sold |
Photo /
More Info. |
16" swing x 48"centers: Century 18" - 35" x 4' - 6'
Catalog size 16",
S# 353,
18" Swing (35" swing in gap),
4' Between centers closed (6' open),
Sliding gap bed slides open up to 24",
8" 3 Jaw chuck, 27" Face plate, Taper attachment, Hard ways 2 piece, Steady rest
|
|
Ad # 14418 | General Purpose Lathe 15in. to 23in. swing |
80's? |
Turnmaster |
17"-5 |
Good |
sold |
Photo /
More Info. |
18" x 60": Turnmaster 17"-5 engine lathe-heavy duty
18" swing over bed,11.75" over cross
slide
center dist: 60"
gap bed design
inch/metric threads:Inch, metric,
and module threading
spindle:D!-8 bore2-1/4"
spindle: D1-8
10 hp main motor
12" 4 jaw chuck,10" 3 jaw chuck,face
plate
taper attachment
Spindle RPM: 20-1600RPM
5" steady rest & follow rest
drill chuck & live center
Notes:coolant pump not working,DRO
display box was removed- |
|
Ad # 1336 | General Purpose Lathe 15in. to 23in. swing |
? |
LG |
2080 OS |
Good |
Sold |
Photo /
More Info. |
Long Bed Manual Lathe: Swing Over Cross Slides 20" x 80" centers
Spindle 3" dia Bore
Gap Bed
Inch/Metric Threads
Steady Rest (3")
Tool Post
#-Jaw Chuck - 12"
|
|
Ad # 5177 | General Purpose Lathe 15in. to 23in. swing |
1951 |
Monarch |
20" |
Good |
Sold |
Photo /
More Info. |
26" x 52" Monarch Engine Lathe: Swing: 26.5"
Swing Over Cross Slide: 18"
Distance Between Centers: 52"
Spindle Bore: 1-1/2"
Spindle Speeds: 17 - 700 rpm
Inch Threading |
|
Ad # 15507 | General Purpose Lathe 15in. to 23in. swing |
1970 |
Monarch |
612 |
Good |
sold |
Photo /
More Info. |
16" swing x 54" between centers: Monarch Manual Engine Lathe
Capacity: 16" swing x 54" between centers
Electrical: 220 3 phase
4 Jaw Chuck
Steady Rest
Swing Over Bed Ways.16"
Swing Over Cross Slide.10"
Center Distance.54"
Spindle Hole.2"
Spindle Speeds.12 To 1,500 Rpm's
Spindle Nose.D-1-8
Feeds..0013 To .0821
Threads Inch.2 To 120 TPI
Threads Metric.No
Tail Stock Quill Diameter.4"
Tail Stock Quill Travel.6"
Tail Stock Taper.# 4 Morse
Steady Rest.4"
Main Motor.10 Hp 220 / 440 |
|
Ad # 8799 | General Purpose Lathe 15in. to 23in. swing |
1943 |
Warner Swaysey |
#4 |
Very Good |
sold |
Photo /
More Info. |
16" swing over cross slide: 14" swing over ways
16" swing over cross slide
center distance 20"
12" 4 jaw chuck
10" 3 jaw chuck
7 1/2 hp
rpm 30-1532
|
|
Ad # 10520 | General Purpose Lathe 15in. to 23in. swing |
80's ? |
Victor |
2080 |
Good |
sold |
Photo /
More Info. |
20 x 80 Manual lathe w/ 3-1/4" spindle bore & taper attach: 20' swing over removable gap bed
12" swing over cross slide
gap bed
taper attachment
steady rest roller tip up to 8"
inch/metric threading
12" 3 jaw chuck
14" 4 jaw chuck
3-1/4" spindle bore
31-1500 RPM
10HP ?? |
|
Ad # 14105 | General Purpose Lathe 15in. to 23in. swing |
|
Sirco |
PA 20 - 4 |
Good |
sold |
Photo /
More Info. |
4" Spindle Bore 20" x 80": Sirco lathe,
4"spindle bore
84" between centers
taper attachments
3jaw and 4 jaw, steady rests
12 speeds 22-1500 RPM
|
|
Ad # 6473 | General Purpose Lathe 15in. to 23in. swing |
1973 |
LEBLOND |
REGAL |
Very Good |
sold |
Photo /
More Info. |
19΄΄ X 126΄΄ LEBLOND REGAL ENGINE LATHE: 19΄΄ X 126΄΄ LEBLOND REGAL ENGINE LATHE:
ACTUAL SWING OVER BED ........... 19-1/4΄΄
DISTANCE BETWEEN CENTERS ........ 126΄΄
SWING OVER CROSS SLIDE ..... .... 12-1/4΄΄
SPINDLE SPEEDS .................. (12) 40-1600
RPM
FEEDS ........................... (48)
.0018-.104 IPR
THREADS ......................... (48) 2-112
TPI
HOLE THRU SPINDLE ............... 1-3/4΄΄
STEADY REST ..................... 6΄΄ 3 POINT
CHIP PANS ....................... YES
HARDENED REPLACEABLE BED WAYS ... YES
THREAD DIAL ..................... YES
COOLANT ......................... YES
MOTOR ........................... 15
HORSEPOWER |
|
Ad # 15253 | General Purpose Lathe 15in. to 23in. swing |
1941 |
Sidney |
20" |
Good |
sold |
Photo /
More Info. |
24" max swing x 10ft centers: Sidney Manual Lathe:20"
capacity:24" max swing over bed,16" swing
over cross slide
center dist:120"/10ft
Spindle bore:2"
chuck:4 jaw 12" dia
steady rest:10" dia max
spindle rpm:18-540
|
|
Ad # 11864 | General Purpose Lathe 15in. to 23in. swing |
1994 |
Enco |
111-1658 |
Fair |
sold |
Photo /
More Info. |
15-3/4" Swing Over Bed, 8-3/4" Swing Over Cross x 60" centers: Enco Model 111-1658 Gap Bed Engine Lathe
15-3/4" Swing Over Bed, 8-3/4" Swing Over Cross Slide, 22" Swing in Gap, 12-1/2" Length of Gap, 60" Maximum Between Centers,
2-1/2" Hole Thru Spindle,
15-Spindle Speeds: 22 to 1,800 RPM,
Inch/Metric Threading,
Tailstock, Steady Rest, Follow Rest, Chip Pan, Coolant Tank and Pump,
7-1/2 HP, Three Phase Motor and
Approx: 112" x 42" x 69" and 5,500 Lbs
Removeable gap bed. 15 3/4" x 58". 21" over gap. 8 3/4 over cross slide. 2 1/4" spindle thru. 15 speeds, 22- 1800 rpm. 7 1/2 hp. 9 1/2" 3 jaw chuck. steady rest and follower rest. |
|
Ad # 4626 | General Purpose Lathe 15in. to 23in. swing |
1979 |
TOS |
SN-63 |
Good |
Sold |
Photo /
More Info. |
TOS SN63 Removable Gap Bed Lathe: Item # 3912 -- Basic Information
Category
Lathes
Sub-Category
Lathes, Gap Bed
Manufacturer
TOS
Model
SN63
Year
1979
Size
25"/34-1/2" x 120"cc
FOB
Baltimore, MD
Price
$ 12500.00
Item # 3912 -- Full Description
25/34 ½ x 120cc TOS SN63 Removable Gap Bed Lathe, new 1979
Maximum swing over bed 25
Maximum swing over cross slide 13 ½
Maximum swing in gap 34 ½
Length of gap from spindle nose 15 Ό
Spindle nose D1-8 Camlock
Spindle bore 2 Ύ
Size of centers No. 5 M.T.
Bed width 18
Cross slide travel 16
Top slide travel 7
Tailstock spindle diameter 3 ½
Tailstock spindle travel 9 ½
16 spindle speeds 10-1000 RPM
Longitudinal feeds .002-.242 IPR
Cross feeds .001-.121 IPR
Thread range:
Inch 1-80 T.P.I.
Metric 0.5-4.0 mm
D.P. 2-72
Module 0.25-20
EQUIPPED WITH:
Removable gap bed
Induction hardened bedways
Swivel compound
T-slotted rear rest
D1-8 Camlock spindle
Inch/Metric threading
Thread dial
2-axes TRAK digital readouts
18in. diameter 4-jaw chuck
18in. diameter 3-jaw universal chuck with (6) sets of soft jaws
12 diameter capacity 3-point roller steady rest
Aloris toolpost with (10) holders and boring bar
Micrometer carriage stop
Pipe center
Pan bed and coolant
10 H.P. main drive motor
3/60/480 volt electrics
Condition: Good
Approximate weight: 7,400 lbs.
Floor space: 198L x 57W
Price: F.O.B. Truck, Baltimore, MD
.$12,500.00
|
|
Ad # 11383 | General Purpose Lathe 15in. to 23in. swing |
1965 |
Mazak |
Ajax 18 |
Very Good |
sold |
Photo /
More Info. |
18" x 100": Swing Over Bed Ways 18"
Swing Over Cross Slide 9"
Center Distance 100"
Spindle Hole 2" 1/16
Spindle Speeds 25 To 1,500 Rpm's
Threads Inch 4 To 56 TPI
Threads Metric 0.5 To 7 |
|
Ad # 6967 | General Purpose Lathe 15in. to 23in. swing |
80's |
clausing |
Colechester 17" |
Good |
sold |
Photo /
More Info. |
17" swing x 100" centers W/ 3" spindle bore: 17" swing over ways, 10" over crossilde
100" cener distance
3" spindle bore
12" 3 jaw chuck
no tool post
10 HP
20-1600 RPM
|
|
Ad # 11684 | General Purpose Lathe 15in. to 23in. swing |
80's ? |
Nardini |
ND1585E |
Good |
sold |
Photo /
More Info. |
16"swingx 85" centers: Nardini Lathe 16 x 85"
16" swing over bed , 10" over cross slide
85" between centers
RPM: 25-2000
2" spindle bore
follow rest
inch/metric threads
|
|
Ad # 13608 | General Purpose Lathe 15in. to 23in. swing |
1965 |
Monarch |
610 |
Good |
sold |
Photo /
More Info. |
16" x 54": Monarch Model 610
16" x 54"
swing over crosslide: 10"
center distance 54"
2" Spindle Bore
220/3 Phase
12-1500 RPM
Steady Rest.
4 Jaw 12" Chuck
Chuck on Lathe does not Go with it.
|
|
Ad # 13930 | General Purpose Lathe 15in. to 23in. swing |
|
Victor |
1640 |
Good |
sold |
Photo /
More Info. |
16 x 40: Swing Over Bed 16
Swing In Gap 23
Swing Over Cross Slide 10
Distance Between Centerrs 40
Spindle Speeds (8) 60-1800
Spindle Nose D1-
6
Hole Thru Spindle 2
Threads:
Inch (32)
Metric (25)
Feeds (32) 0.0025"-
0.0455"
Cross Slide Travel 9
1/2"
Tailstock Quill Taper #4
MT
Tailstock Quill Travel 6"
Dimensions (L x W x H) 80" x 50"
x 48"
Weight 3,500
Lbs.
Equipped with:
3 jaw chuck
5c collet closer Lever type
Yuasa Quick change tool post
Coolant system
|
|
Ad # 8222 | General Purpose Lathe 15in. to 23in. swing |
|
LeBlond |
22 x 60 |
Very Good |
Sold |
Photo /
More Info. |
22 x 60 Leblond Engine Lathe: Spindle Speed range; 25-100 RPM
Spindle Bore: 1 3/4" spindle bore,
Swing: 22" over ways,
Swing: 12" over cross slide
DBC: 60" between centers,
Chuck: 10" 3 jaw chuck
threading, |
|
Ad # 15494 | General Purpose Lathe 15in. to 23in. swing |
? |
Zubal |
C3 |
Good |
sold |
Photo /
More Info. |
16 Swing x 57" between centers: Zubal Manual Lathe
Model: C3
Capacity: 16" Swing x 57" between centers
Electrical: 220/3 phase
3 Jaw chuck 3" diameter
4 Jaw chuck 4" diameter (not pictured)
1 3/4" Spindle bore
Includes toolpost, holders, and gears |
|
Ad # 5944 | General Purpose Lathe 15in. to 23in. swing |
1967 |
MONARCH |
SERIES 50 |
Excellent |
Sold |
Photo /
More Info. |
16 x 78 cc Series 50 MONARCH Engine Lathe: 16 x 78 cc Series 50 MONARCH Engine Lathe
Max. swing over bed and carriage wings 16
Max. swing over cross slide 10
Bed width 12
Spindle bore 1 13/16
Camlock spindle nose D-1-6
Compound rest top slide travel 2 1/2
Tailstock spindle diameter 2 3/8
Tailstock spindle travel 5 ½
Tailstock center size No.4 M.T.
3 ranges infinitely variable spindle speeds 30-1800 RPM
54 feeds .0011-.070 IPR
Thread range 1 ½ - 92 T.P.I
EQUIPPED WITH:
Hardened and ground bedways
Swivel compound
Presetting of surface feet per minute provided
Spindle speed selection by work diameter
Swing type chuck guard
12 dia. 6-jaw chuck
12 dia. 4-jaw chuck
SJOGREN collet chuck w/ collets
Micrometer carriage stop
Aloris toolpost with (6) toolblocks
(4) lathe turning tools
Thread indicator
(3) live centers
Drill chuck
Pan bed and coolant
10 H.P. variable speed drive with controls
3/60/460 volt electrics
|
|
Ad # 2127 | General Purpose Lathe 15in. to 23in. swing |
|
Leblond/Regal |
21" x 10Ft. |
Good |
sold |
Photo /
More Info. |
21" swing x 10Ft. centers manual lathe: leblond
21" swing x 10Ft. centers manual lathe
Long 12ft bed overall
21" swing over ways, 12" swing over cross
slide
2" spindle bore
English threads
Steady & follower rests
12" -4 jaw chuck
10HP
25-1000RPM
|
|
Ad # 13415 | General Purpose Lathe 15in. to 23in. swing |
|
Kingston |
HJ-1100 |
Good |
sold |
Photo /
More Info. |
18" Swing, 43.5" Centers: Kingston HJ-1100 lathe
in great working condition has 3 jaw and 4 jaw
chuck steady rest and tool post. standard and
metric threading Machine works great, can load for
free and you can see it run before you buy.
Swing over Bed (in.)18
Distance between Centers (in.)43-1/2
Spindle Bore (in.)2-1/4
Spindle Nose D1-6
Spindle Taper (with Sleeve) MT-6 (MT-4)
Number of Spindle Speeds 12
Range of Spindle Speeds (RPM)
35, 52, 75, 110,
160, 230, 330, 490,
650, 950, 1,350, 2,000
Number of Longitudinal Feeds 16
Range of Longitudinal Feeds (in./rev.) 0.0012 -
0.034
Number of Cross Feeds 16
Range of Cross Feeds (in./rev.) 0.008 - 0.023
Number of Inch Threads 44
Range of Inch Threads (T.P.I.) 2 - 72
Number of Metric Threads 39
Range of Metric Threads (mm) 0.2 - 14
Compound Slide Travel (max./in.) 5-7/8
Cross Slide Travel (max./in.) 10-2/5
Tailstock Quill Travel (max./in.) 5-7/8
Tailstock Quill Diameter (in.) 2-3/8
Tailstock Quill Taper MT-4
Leadscrew Diameter (in.) 1-3/8
Leadscrew Thread Pitch (T.P.I.) 4
Main Drive Motor 7-1/2 HP,
220V/440V/3 Phase/60 Hz.,
Prewired 220V
Floor Space Dimensions (in./L x W) 98 x 41
Net Weight (lbs.) 3,520
|
|