Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9825 | Ironworkers |
|
|
|
|
Sold |
Photo /
More Info. |
WEIDEMANN 12 POSITION TURRET PUNCH : IN EXCELLENT SHAPE |
|
Ad # 9815 | Ironworkers |
2008 |
Pirahna |
P50 |
Excellent |
Sold |
Photo /
More Info. |
50 Ton: |
|
Ad # 13104 | Ironworkers |
2003 |
Scotchman |
6509-24M |
Good |
sold |
Photo /
More Info. |
65 Ton: Scotchman Iron Worker
Model 6509-24M
65 Ton
220/1 Single Phase Machine
9" Throat Depth
24" Flat Bar Shear with 4-Way Reversible Blade (1" x 6", 1/4" x 24")
Angle Shear Capacity at 90° 6" x 6" x 3/8" and 5" x 5" x 1/2"
Many Punches included. Tubing Notcher only other tooling. |
|
Ad # 12492 | Ironworkers |
|
Piranha |
P120 |
Good |
SOLD |
Photo /
More Info. |
120 Ton: Piranha P120 Iron Worker
CAPACITIES & SPECIFICATIONS: MODEL P-120 120 TON
Throat Depth 12" Open Height 15-1/2"
Closed Height w/o Die Block 10-1/4" Work Stations From Floor 44"
Hydraulics:
Pump GPM
System R/V PSI
15
3500 Stroke Length 5-1/4"
Bar Shear:
Round(Min. to Max.)
Square (Min. to Max.)
1/2" to 2"
1/2 " to 1-3/8" Motor STD. 230/460 1800 rpm
Punch:
Max. Material
Max. Hole *Special Tool
Platen Table Size (D-W) 120 Tons
1-1/2" thru 1"
*5" thru 1/4"
14-1/2" x 21" Coper-Notcher (Tons)
(Mat.) 95
4" x 6" x 3/8"
Dimensions
(NET) W-L-H
35 " x 90" x 68-1/2" Plate Shear 20-1/2" Long
1" x 12"
3/4" x 18"
1/2" x 20"
Bending Attachment 12" Optional Lengths Available Weight (NET) lbs 6200
Strokes Per Minute 40 @ 3/4" Angle Shear (Max.) 6" x 6" x 5/8"
|
|
Ad # 8348 | Ironworkers |
|
Buffalo |
1/2 |
Good |
Sold |
Photo /
More Info. |
58 Ton Buffalo Ironworker: USED 58 TON BUFFALO IRONWORKER
Punch-Tonnage:58 Tons
Hole Capacity:1-1/16" Through 5/8"
Throat Depth:20"
SPM Approx.:44
Shear-Flats:9-3/8" x 1/4"
9" x 3/8"
8-1/8" x 1/2"
7" x 5/8"
Length Of Knives:9-3/4"
Bar Cutter-Rounds:1-5/8"
Squares:1/2" to 1-1/2"
Angles:4" x 4" x 1/2"
Notcher-Angles:3" x 3/8"
Plates:5/16"
Depth of Cut:2-3/4"
EQUIPPED WITH:
Foot Pedal For Operation
Pushbuttons For Start - Stop
Assortment of Punches & Dies
Punch & Die Holder
3 HP 1750 RPM 230/460/3/60 Motor
|
|
Ad # 10320 | Ironworkers |
|
Pettinghouse |
210 super 13 |
Good |
sold |
Photo /
More Info. |
30 ton: 60 MP capacity -30 ton
will punch 7/8" hole in 1" mtl
angle shear 4 x 4
bar shear
8" flat bar shear in 1" mtl
coper/notcher
dual foot pedals
includes: punches: 1/8" up to 1" with some shapes..slots, squares. approx 50 punches
|
|
Ad # 13870 | Ironworkers |
1975 ? |
Mubea |
BF 10 |
Fair |
sold |
Photo /
More Info. |
21 Ton-mechanical type: Mubea Ironworker
Model: BF 10
Capacity: 21 Ton
mechanical ironworker
Electrical: 230/ 3 phase
Round Holes...1 1/4" in 3/16" & 9/16" in 7/16"
Number of Strokes Per Minute...72,
Depth of the Throat...2"
Plate Shear...6"x 5/16",
Angles...3x3x5/16"@
90A degree 2x2x4 1/4"@ 45A degree,
Round Bar & Square Bar...1 3/32",
Channel...2 3/4"x 1/2"x 6"@ 90A degree
Some tooling included |
|
Ad # 7438 | Ironworkers |
1996 |
Scotchman |
4014C |
Good |
Sold |
Photo /
More Info. |
40 Ton Scotchman 4014C Ironworker : GENERAL SPECIFICATIONS
Punching Capacity: 40 Ton
Punching Capacity: 1" in 1/2"
Throat Depth: 6"
Flat Bar Shear Length: 14"
Bar Shear Capacity: 5/8" x 5"
Strokes Per Minute, Light Material: 40
Strokes Per Minute, Max. Capacity: 12
EQUIPPED WITH
3 HP Motor
Adjustable Stroke Controls |
|
Ad # 11998 | Ironworkers |
95 |
Dvorak |
314 |
Excellent |
sold |
Photo /
More Info. |
40 Ton: Dvorak Iron Worker
Model 314
220 single Phase
40 Ton
Angle Shear
3" x 3" x 1/4"
Shear
1/2 x 6"
3/16 x 12"
Punch 1" 1/4" x 1/4"
|
|
Ad # 9174 | Ironworkers |
76 |
Scotchman |
4014CM |
Good |
Sold |
Photo /
More Info. |
40 Ton Ironworker: Scotchman Ironworker 4014 CM
40 ton punch
includes angle iron shear acc
Punch capacity : 1 inch thru 1/2 in mtl
bar shear: 1/2" x 6 plate or 3/16 x 14 max, 5/8 x 5, 3/8 x 8..14 in max cut length
Angle Shear:3 x 3 x 5/16
230/3 Volts;
4014 CM Machine Capacities spec. based on mild steel at 65,000 psi tensile strength |
|
Ad # 12823 | Ironworkers |
70's |
Carlstadt |
N-58 |
Good |
sold |
Photo /
More Info. |
Bar/picket Twister machine 1/2" sq: Carlstadt bar twisting machine
1/2" sq solid rod w/ optional 5/8" acc
3/4HP
base 12" x 18"
some bushings included
Men E Uses no 2
Picket Twister-twists square bars quickly and easily for railings, grills ect.-bars remain straight after twisting
drum switch permits accurate control for bar end alignments
manuals |
|
Ad # 8181 | Ironworkers |
2004 |
Scotchman |
DO 70 |
Excellent |
Sold |
Photo /
More Info. |
Scotchman dual operator 70/110 Ton Ironworker: 70 Ton Punch Capacity
110 Ton Shear Capacity 24"x3/8"
Includes angle iron shear...option
new flat bar shear blades
Upgraded to large size
Dual operator
Standard Features
Dual Operator allows for Two Operators to Work at the Same Time at Full Capacity
70 Ton Punch Station (1-1/8" in 3/4")
Keyed Punch Ram for Safety
9" Throat Depth
Punch Gauging Table with Fence and Scale
Die Holder Complete with 2" Die Insert
Punch Nut with Wrench
Adjustable Swing-Away Stripper
One Round Punch & Die: Max. Dia. 1-1/4"
Punch Jog Control
Two Adjustable Electric Stroke Controls with Scale
Two Electric Remote Foot Pedals
Two 2-Stage Hydraulic Pumps
Two Valves
Angle Shear Capacity 6" x 6" x 1/2"
Rectangle Notcher 3" x 5" x 3/8",
3" x 4" x 1/2'
Notcher Table with Guides
110 Ton, 24" Bar Shear with
Sabre Blade (1" x 6", 3/8" x 24")
Shear Table with Miter Fence
Tool Table Work Area
Slug Receptacles
Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations
230/460 Volt/3 Phase Electrics (must specify voltage)
All Guards Necessary to Comply with
ANSI B 11-5 Standards
Forklift Accommodations
One Year Warranty
Made in USA
factory Options available--not included below
Capacities & Specifications
Punching Capacity 70 ton
1-1/8" IN 3/4" 63 mt
28 IN 20
Special Tooling 4" Max. Dia. 100 thru 5.5
Throat Depth 9" 225 mm
Flat Bar Shear (Sabre Blade - Std) 110 ton
24" Length
1" x 6"
3/4" x 10"
1/2" x 14"
3/8" x 24" 100 mt
600
25 x 150
18 x 250
12 x 350
10 x 600
Angle Shear 90° 6" x 6" x 1/2" 150 x 150 x 12
Angle Shear 45° 3" x 3" x 3/8" 75 x 75 x 10
Angle Shear 45° (with Bar Shear) 4" x 4" x 1/2" 100 x 100 x 12
Brake 12" 65 ton 59 mt
Brake 24" 45 ton 40 mt
Open End Brake Max. 1/4" x 6" Flat or Angle Iron 6 x 150
Pipe Notcher Schedule 40 I.D. 3/4", 1", 1-1/4",
1-1/2", 2" 19, 25, 32, 38, 50
90° V. Notcher 6" x 6" x 5/16" 150 x 150 x 8
NOTCHER
Rectangle
V. Notch
Notching in Leg of
Channel 3" x 5" x 3/8"
3" x 4" x 1/2"
3" x 3" x 3/8"
6" to 10" 75 x 125 x 10
75 x 100 x 12
75 x 75 x 10
150 to 250
Channel Shear 2" to 6" Adj. 50 to 150 Adj.
ROD SHEAR
Round Rod
Square Rod 1/4" to 1-1/4",
9 Cav.
1/4" to 1",
1 Cav. 6 to 32
6 to 25
Square Tube Shear 1/2" to 2",
14 ga. 12 to 50
Picket Tool 1/2", 3/4" & 1" 12, 19, 25
Offset Die Holder Max. 40 ton 36 mt
Strokes Per Minute in Light Material 1/4" Stroke 25 spm
Strokes Per Minute in Heavy Material 3/4" Stroke 17 spm
Hydraulics 2,500 psi 172 bar
Motors Standard 10 hp 3 ph
Dimensions W-30" L-65"
H-72-1/8" W-76 L-165 H-183 cm
Weight 3,790 lbs. 1,720 kg
|
|
Ad # 10486 | Ironworkers |
unknown |
Scotchman |
4014CM |
Good |
SOLD |
Photo /
More Info. |
40 ton: 40 Ton Punch Station (1" in 1/2")
Keyed Punch Ram for Safety
6" Throat Depth
2" Die Holder
Punch Nut with Wrench and Stripper
One Round Punch & Die: Max. Dia. 1"
Adjustable Stroke Control
Angle Shear Capacity:
3" x 3" x 5/16" at 90° and 2" x 2" x 1/4" at 45°
14" Flat Bar Shear with 4-Way Reversible Blade (1/2" x 6", 3/16" x 14")
Tool Table Work Area
Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations
230/3 voltage)
All Guards Necessary to Comply with ANSI B 11-5 Standards
Fork Lift Accommodations
One-year warranty
Made in USA
|
|
Ad # 7871 | Ironworkers |
1994 |
Piranha |
P-50 |
Good |
Sold |
Photo /
More Info. |
50 Ton Hydraulic Ironworker Piranha Model P-50: (1) Piranha 50 ton Hydraulic Ironworker
Throat depth - 8"
Open height - 13-1/2"
Closed height w/o die block - 9-1/4"
Stroke length - 4-1/4"
Punch capacity - 50 tons
... material thickness - 13/16" through 3/4"
... strokes per minute - 60 @ 1/2"
... platen table size - 10" x 17"
Bar shear capacity, round - 1/4" to 1-1/2"
Bar shear capacity, square - 1/2" to 1"
Coper-notcher (56 tons) - 2-3/4" x 4" x 1/4"
Plate shear (14-5/8") - 3/4" x 10" , 5/8" x 14"
Angle shear, maximum - 5" x 5" x 3/8"
Brake: 8" long
Hydraulic pump (10.5 GPM) - 2600 PSI, 18 gallons
Motor - 10 HP, 1800 RPM--
Includes Punch Dies & Press Brake Die (4-Way die ranging from approx 1" wide to 2-1/2" wide) |
|
Ad # 5984 | Ironworkers |
1985 |
Scotchman |
314-C |
Good |
Sold |
Photo /
More Info. |
40 Ton Scotchman 314-C Ironworker: Model: 314-C
Flat Bar Capacity:
Punch Capacity:
Angle Shear Capacity: 3" x 3" x 0.25"
Tonnage: 40
Specification Description
TONNAGE 40 TON
BAR SHEAR 14"
ANGLE SHEAR 3"
WEIGHT 1300 LBS
Model 314C -std specs-verify..
Throat depth 6"
Punching: 1" diameter x 1/2" thick, 11/4" diameter x 3/8" thick
Cropping: angle 3" x 3" x 5/16" @ 90 degrees, 2" x 2" x 5/16" @ 45 degrees
Shearing: 10" x 1/4", 6" x 1/2", 5" x 5/8"
Dimensions: 4' Length x 2'4" Width x 4'4" Height
Power: 3 HP
|
|
Ad # 9687 | Ironworkers |
|
pedinghaus |
210 AD/20 |
Good |
sold |
Photo /
More Info. |
210 ton mechanical : 210 ton mech. type
6x6x1/2 capacity
V-notcher-4x4x1/2
flat bar shear-13-3/8x1/2
2-5/16 max hole punch
19" throat on punch
punch cap.-1-3/16thx7/8 thick or 1x1 hole
tooling-lots of punches & dies |
|
Ad # 12260 | Ironworkers |
93 |
Scotchman |
4014C |
Good |
sold |
Photo /
More Info. |
40 Ton 220 Single Phase: Scotchman 4014C
Voltage 220/ Single Phase
Specifications:• Capacity (tonnage) 40
• Throat 6"
• Shears:
Angle 3" x 3" x 1/4"
Miter (45°) 2" x 2" x 1/4"
• Punching capacities:
3/4 Mild steel 5/8"
1/2" Mild steel 1"
3/8" Mild steel 1-1/4"
• Flat bar shear:
1/2" Mild steel 8"
3/8" Mild Steel 10"
1/4" Mild Steel 12"
3/16" Mild steel 14"
• Hydraulic pressure (PSI) 1,400
• Dimensions:
Left to right 57"
Front to back 52"
Height 58"
• Weight 2,050 Lbs
|
|
Ad # 10749 | Ironworkers |
|
Scotchman |
314 |
Good |
SOLD |
Photo /
More Info. |
30 ton: Scotchman 30 ton Ironworker Mod. 314
50 dies valued at 60.00 per die being given away with machine for free: both going together either way.
|
|
Ad # 9213 | Ironworkers |
|
custom |
30 ton ?? |
Good |
Sold |
Photo /
More Info. |
10-25 tons capacity-?: machine that will cut
4.5" flat bar shear
10-25 tons ??
3 x 3 angle iron shear
rod shear 1.5,1",3/4",1/2",3/8",1/4" Dia.
hole punch- approx 1" ??
40 ton 5" dia. cylinder
|
|
Ad # 14091 | Ironworkers |
1992 |
Piranha |
P-50 |
Good |
sold |
Photo /
More Info. |
50 Ton: Piranha P50 Ironworker
Features such as urethane stripping, automatic
shear hold-downs, quick change tooling, low blade
rake angles, and six standard work stations,
coupled with its ergonomic design and clear lines
of sight to all tools, including shear blades,
place Piranha ironworkers far above the
competition. These features produce higher quality
fabricated parts, and make Piranha hydraulic
ironworkers easier to use than any other
ironworker.
PIRANHA SINGLE OPERATOR IRONWORKERS are the most
versatile line of hydraulic ironworkers in the
market today. Built in America for over 25 years,
Piranha Single Operator Ironworkers provide six
(6) standard workstations:
1. Punching
2. Bending
3. Round or Square Bar Shearing
4. Flat Bar Shearing
5. Angle Iron Shearing (no slug loss)
6. Coping/Notching
throat: 8"
open height: 13.5"
stroke: 4.250"
punch: 50 ton-13/16 thru 3/4"..max hole size: 5"
thru 1/8" mtlw special tooling
punch table: 10 x 17"
angle shear: 5" x 5" x 3/8" or 4" x 4" x 1/2"
bar shear: round-1/4" to 1-1/2" square: 1/2" to 1"
coper/notcher: 2-3/8" x 4" x 1/4"
press brake acc included 8" 4 way
strokes 60 per min
motor: 10 hp
foot pedal or joystick control
several punches & dies included approx a dozen
note: main pix mfg stock photo
|
|
Ad # 11370 | Ironworkers |
2000s |
Uni hydro |
P50-14 |
Excellent |
sold |
Photo /
More Info. |
50 Ton Uni Hydro: 50 Ton
Uni-Hydro
Wired 220 Single Phase
Maximum Flat Angle
4" x 4" X 1/2"
Maximum Flat Bar
1/2" x 10" 5/8" x 8" 3/4" x 6"
Maximum Hole Punch
1" Diameter in 1/2"
|
|
Ad # 12259 | Ironworkers |
94 |
Scotchman |
6509 |
Good |
sold |
Photo /
More Info. |
65 Ton: Rated on: 65,000 PSI Tensile A 36 Mild Steel
Punching Capacity 65 ton
1-1/16" in 3/4" 58 mt
27 mm in 18 mm
Special Tooling 4" Max. Dia. 100 mm Max. Dia.
Flat Bar Shear 24" Length
1" x 6"
3/4" x 10"
1/2" x 12"
3/8" x 16"
1/4" x 24" 600 mm
25 mm x 150 mm
18 mm x 250 mm
12 mm x 300 mm
10 mm x 400 mm
6 mm x 600 mm
Opt. Saber Blade 1" x 6"
1/2" x 16" 25 mm x 150 mm
12 mm x 400 mm
Angle Shear 90° 6" x 6" x 3/8"
5" x 5" x 1/2" 150 mm x 150 mm x 10 mm
125 mm x 125 mm x 12 mm
Angle Shear 45°
(with Bar Shear) 3" x 3" x 3/8"
4" x 4" x 1/2" 75 mm x 75 mm x 10 mm
100 mm x 100 mm x 12 mm
Brake 12" 40 ton 36 mt
Brake 24" 30 ton 27 mt
Open End Brake Max. 1/4" x 5"
Flat or Angle Iron 6 mm x 125 mm
Pipe Notcher
Schedule 40 I.D. 3/4"
1"
1-1/4"
1-1/2"
2" 19 mm
25 mm
32 mm
38 mm
50 mm
Rectangle Notcher 2" x 2-1/2" x 3/8" 50 mm x 65 mm x 10 mm
90° V. Notcher 6" x 6" x 5/16" 150 mm x 150 mm x 8 mm
Channel Shear 2" to 5" Adj. 50 mm to 125 mm Adj.
Strut Shear Samples Required
Rod Shear
Round Rod (Max.)
Square Rod (Max.) 1/4" to 1-1/4", 9 Cav.
1/4" to 1", 1 Cav. 6 mm to 32 mm
6 mm to 25 mm
Square Tube Shear 1/2" to 2",
12 ga. 12 mm to 50 mm
2.75 mm
Picket Tool 1/2"
3/4"
1"
16 gauge 12 mm
19 mm
25 mm
1.6 mm
Offset Die Holder Max. 40 ton 36 mt
Strokes Per Minute in Light Material 1/4" Stroke [Punch Station] 40 spm
Strokes Per Minute in Heavy Material 3/4" Stroke [Punch Station] 17 spm
Hydraulics 2,600 psi 183 bar
Dimensions W-24"
L-60"
H-66" W-57 cm
L-152 cm
H-168 cm
Weight 2,750 lbs. 1,250 kg
|
|
Ad # 14155 | Ironworkers |
2002 |
Mubea |
HIW 750/510 |
Good |
sold |
Photo /
More Info. |
82 Ton: Mubea Ironworker
Capacity: 82 Ton
Model: HIW 750/510
Electrical: 230/460/3 phase
Punching:
Max. Tonnage.......82 Ton
Punch Capacity.....1-1/4” Hole Thru 3/4” Plate
Max Stroke Length .3-1/8"
Throat.............20"
Bar Shear:
Flat Max. Thickness...12" x 3/4”
Flat Max. Width.......18” x 5/8”
Angle Shear:
Max. Size.............6" x 6" x 1/2"
Coper Notcher:
Max Size..............2-1/16" x 3-1/2" x 7/16"
Round/Square:
Max. Size ............2"
Motor Size............10 HP
(5) Separate Work Stations:
Punching......Standard
Angle.........Standard
Flat Bar......Standard
Notching......Standard
Rod/Square....Standard
|
|
Ad # 8347 | Ironworkers |
|
Peddinghaus |
66/110H |
Good |
Sold |
Photo /
More Info. |
66 Tons Peddinghaus Hydraulic Ironworker: USED 66 TON PEDDINGHAUS Hydraulic IRONWORKER
Punch-Tonnage:66 Tons
Hole Capacity:1-1/16" Through 21/32"
Stroke:9/16" - 1-3/16"
Throat Depth:20"
SPM Approx.:30
Shear-Angles:5" x 5" x 1/2"
3-1/2" x 3-1/2" x 3/8"
Flats:20" x 7/16"
16" x 5/8"
6" x 3/4"
4" x 7/8"
Length Of Knives:20"
Notcher-Plates:1/2"
Angles&Tees:3-1/2" x 3/8"
Bar Cutter-Rounds:1-3/4"
Squares:1-5/8"
EQUIPPED WITH:Electric
Foot Switch
Pushbuttons For Start - Stop
Selector Switch For Raise-Off-Lower
Emergency Stop Button
Punch & Die Holder
Pressure Gauge
Hydraulic Pump Driven By
10 HP Motor
|
|
Ad # 14468 | Ironworkers |
80's? |
Iron crafter |
30-30 |
Good |
sold |
Photo /
More Info. |
30 ton-single phase 110/1: Iron Worker: Iron Crafter
single phase 110/1
Model 30-30
30 Ton
2” stroke
capacities:
punch: 1" hole thru 3/8" MS\ild steel
flat bar:1/2" x 6"
angle iron:3" x 3" x 1/4"
mitre angle iron @ 45 deg : 2 x 2 x 1/4"
round:1"
square: 3/4"
120V single phase
Large quantity of tooling over 75
punches & dies many new also oversize hole punch
plate tooling and cusom punch holder table. Great
home shop or farm machine!
|
|
Ad # 11607 | Ironworkers |
2003 |
Scotchman |
8507-14M |
Very Good |
sold |
Photo /
More Info. |
85 Ton Fully intergrated: Fully Intergrated FI 85/140
85 Ton Punch
140 plate shear tonnage
Punch 1-1/16" Hole 1" Thick
Shear 1" x 12" Plate
6" x 6" 1/2" Angle
1 3/8" Round Bar Shear
1-1/4 Square Bar
6" Throat
Notching 3"
no round stock blade in machine
has new blades in other location |
|
Ad # 13891 | Ironworkers |
1980 |
Scotchman |
5075 |
Good |
sold |
Photo /
More Info. |
50 Ton: Scotchman Iron Worker
Model 5075
24" Shear Blade
hole punch: 1" thru 1/2" mtl steelw/7.5" depth on the punch throat
Angle Shear: 6" x 6" x 3/8"
Rod Shear:optional
bar shear: 24" max length
Many misc Punches included
main motor:5 HP motor
Shear Blades have been resharpened |
|
Ad # 12999 | Ironworkers |
1997 |
Scotchman |
4014C |
Excellent |
sold |
Photo /
More Info. |
: 1997 Scotchman Ironworker # 4014C
Specifications:• Capacity (tonnage) 40
• Throat 6"
• Shears:
Angle @ 90 deg 3" x 3" x 5/16"
Miter (45°) 2" x 2" x 1/4"
40 strokes per min max
• Hole Punching capacities:
3/4 Mild steel 5/8"
1/2" Mild steel 1"
3/8" Mild steel 1-1/4"
• Flat bar shear:
1/2" Mild steel 8"
3/8" Mild Steel 10"
1/4" Mild Steel 12"
3/16" Mild steel 14"
14" max flat bar shear
includes 12" brake, angle iron shear..as shown
deluxe punch kit-lots of them approx 25-all new punches
machine like new never used |
|
Ad # 7798 | Ironworkers |
1995 |
Edwards |
50 Ton Jaws IV |
Good |
SOLD |
Photo /
More Info. |
50 Ton Hydraulic Ironworker Edwards Model Jaws IV: Specifications:
Punch Capacity - 1" hole in 5/8" Plate
Shear Capacity - 10" x 1/2"
Round Capacity - 1"
Square Capacity - 1"
Angle - 3" x 3" x 3/8"
Coper - 2" x 3" x 5/16"
3 HP Main Motor |
|
Ad # 9811 | Ironworkers |
2007 |
Edwards |
65 Tion |
Fair |
sold |
Photo /
More Info. |
: 2007 Edwards Ironworker, 65 Ton, S/N 3886507, 3Ph, 440V, 60Hz, 9-3/4" Throa... |
|
Ad # 15250 | Ironworkers |
1953 |
Buffalo |
1/2 |
Good |
sold |
Photo /
More Info. |
58 ton: Buffalo #1/2 mechanical Ironworker
std mfg specs below Specifications
Punch ram pressure:58 tons
Punch throat:20"
Working height:38-7/16"
Punch number:664
Die number:14020
OD of die x height:2" x 1-1/8"
Die gauge line:7/8"
Flywheel RPM:307
Strokes per minute:44
Length of punch stroke:1-1/16"
Capacity of punch:1" x 5/8"; 13/16" x 3/4"
Angle shear capacity at 90 degrees:4" x 4" x 1/2"
Angle shear capacity at 45 degrees:3" x 3" x 5/16"
Length of angle shear stroke:1-1/2"
Rounds:1-5/8"
Squares:1-1/2"
Notcher:3" x 3" x 5/16"
Coper:2" x 3" x 3/8"
Motor:3 HP
Volts:208-220/440
Phase:3 Cycles 60
Amps:8.7-8.7/4.35
Approximate dimensions
73" x 50 x 82" high
Approximate weight:4,300 lbs
It can punch 13/16 in 3/4 plate,larger in thinner steel.It can shear 3x6x3/8 angle,5/8x6 flatbar and shear up to 1/2 plate of unlimited width using the bypass feature.
It can also punch to the center of a 2x2"angle iron leg.It will shear 1-5/8" round bar and depending on the tooling package do a whole lot more. |
|
Ad # 10905 | Ironworkers |
2004 |
piranha |
p50 |
Very Good |
sold |
Photo /
More Info. |
piranha p50 ton: click link for specs
http://www.piranhafab.com/ |
|
Ad # 7809 | Ironworkers |
2005 |
Piranha |
P-50 |
Excellent |
Sold |
Photo /
More Info. |
50 Ton Hydraulic Ironworker Piranha Model P-50: Used P-50 PIRANHA 5"x 5"x 3/8" - 50 Ton Hydraulic Ironworker
General Specifications:
Tonnage Capacity At Punch End: 50
Throat Depth: 8"
Closed Height w/o Die Block: 9-1/4"
Bar Shear; Round Min. to Max. 1/4" to 1-1/2"
Square Min. to Max. 1/2" to 1"
Punch End; Max. Material 13/16" thru 3/4"
Max. Hole (special tool) 5" thru 1/8"
Platen Table Size: 10" D x 17" W
Bending Attachment: 8"
Strokes Per Minute: 60 at 1/2"
Open Height: 4-1/4"
Standard Motor: 10 HP AC
Coper-Notcher; (Mat) 2-3/4" x 4"x 1/4"
Plate Shear; 15" Long
3/4"x 10"
5/8"x 15"
Angle Shear; 5"x 5"x 3/8" w/Special Tool: 4"x 4"x 1/2"
Equipped With:
Automatic Urethane Hold Down on Punch Stripper & On Angle Plate & Bar Shear
Front 5 Position Joy Stick
Electric Limit Switches To Set Stroke Control When Using Foot Pedal
Foot Pedal Controls
Standard Knives
Coper-Notcher Station
Assorted Punch & Dies
Optional Quick Set Punch Gauging Table
Optional Mechanical Back Gauge
Optional 8" (Press Brake Type) Bending Attachment
Pipe Notching Attachment
Integral Lifting Lug
Replacement Cost NEW Today Including Cost Of Options Approximately $15,400. At Quoted Price, We Will Off Limited 6 Month Guarantee From Factory Rep. |
|
Ad # 6981 | Ironworkers |
1959 |
BUFFALO |
NO. 2-1/2 |
Good |
sold |
Photo /
More Info. |
USED BUFFALO NO. 2-1/2 UNIVERSAL IRONWORKER: USED BUFFALO NO. 2-1/2 UNIVERSAL IRONWORKER
RAM PUNCH PRESSURE: 105 TONS
STROKES PER MINUTE: 44
DEPTH OF THROAT: 24"
SHEAR: 8" X 7/8" FLATS
3/4" PLATE
14" LENGTH OF KNIVES
24-1/4" WORK HEIGHT
PUNCH: 1-3/16" X 7/8"
1" X 1"
38-3/4" WORK HEIGHT
BAR CUTTER: 6" X 6" X 1/2" ANGLES 90 DEGREES
4" X 4" X 1/2" ANGLES 45 DEGREES
2-1/4" ROUNDS
2" SQUARES
45-3/8" WORK HEIGHT
BUILT IN 90 DEGREE NOTCHER ON PUNCH HEAD:
3" X 7/16" ANGLES
7/16" PLATE
3-1/4" DEPTH OF CUT
54-1/2" WORK HEIGHT
BUILT IN SQUARE COPER ON SHEAR END:
4" X 1/2" ANGLES
1/2" PLATE
2-1/4" WIDTH OF CUT
3-1/2" DEPTH OF CUT
48-1/4" WORK HEIGHT
ONE-SHOT LUBRICATION
MOTOR: 7-1/2 HP 1760 RPM |
|
Ad # 11608 | Ironworkers |
2001 |
Scotchman |
12012-24M |
Very Good |
sold |
Photo /
More Info. |
120 ton: Scotchman model 12012-24m
120 Ton
5 HP
Punch 1 1/2" Hole in 1"
Shear capacity:1" x 12";3/4" x 16";1/2" x 24"
Angle shear 6" x 6" x 1/2" included
1 1/4" Round Bar max capacity
1" Square Bar capacity
12" Throat on punch
notcher acc
13" x 24" Punch Table included
a few misc punches included
foot pedal
new blades |
|
Ad # 11448 | Ironworkers |
1980 |
Hill ACME |
#6 |
Excellent |
sold |
Photo /
More Info. |
95 Ton 15hp: Hill ACME 95 Ton
Dual Foot Switch
24" Throat Depth
Punching Capacity
1-1/4" Thru 7/8" ; 1-3/16" Thru 1"
1-1/2" Stroke 65 SPM
Plate Shear
6" x 1-1/8" 10" x 3/4" 14" x 1/2"
Bar Shear
2-3/16" Round 2" Square
Angle Stock
6" x 6" x 1/2" 4" x 4" x 1/2" Tees
Notcher
Rectangular........3-1/4" x 3-1/4" x 1/2"
90 Degree V.......1/2" x 2-1/4" Deep
|
|
Ad # 8341 | Ironworkers |
|
HTC |
IW-100 |
Good |
sold |
Photo /
More Info. |
100 Ton Hydraulic Ironworker: USED 100 Ton HTC Hydraulic IRONWORKER
Punch-Tonnage:100 Tons
Stroke:1-1/2"
Hole Capacity:1-1/4" x 7/8"
Throat Depth:24"
Flat Shear-Angles (90 Dg.):6" x 6" x 5/8"
Angles (45 Dg.):4" x 4" x 1/2"
Flat:24" x 1/2"
Length of Knives: 24"
Bar Shear-Rounds:2"
Squares:2"
Coper/Notcher-Coper:3-1/2" Square x 3/8" Thick
Notcher:3-1/2" x 90 Dg. - 3/8" Thick
SPM Approx:11.3 Shear Section
15.8 Punch Section
Equipped With:
Freestanding Control w/Dual
Palm Buttons for Operation -
Each End
Pushbuttons for Start-Stop & Energy
Saver
Selector Switches For Jog-Run &
Jog Up-Down; Punch-Iron Worker
Small Amount of Extra Punches & Dies
Parker Hydraulic Pump Driven By
15 HP 1760 RPM 230/460/3/60 Motor
|
|
Ad # 12741 | Ironworkers |
|
Peddinghaus |
Peddiworker 880 |
Good |
sold |
Photo /
More Info. |
88 Ton: Peddinghaus Peddiworker 880
Voltage 220/3 Phase
88 Ton
hydraulic
8" Throat on punch
12" Shear Blade
5" Angle Shear
Notcher
std specs below
Model # Peddiworker 880
Tons : 88
Capacity: 4'' x 4'' x 3/8'' - 5"x 5"x 1/2" angle 88 Capacity: 4'' x 4'' x 3/8'' - 5"x 5"x 1/2" angle 5/8" x 14" bar 1-1/4" thru 3/4" 1-3/16" sq. & 1 ¼'' round
5/8" x 14" bar
1-1/4" thru 3/4"
1-3/16" sq. & 1 ¼'' round bar
Voltage : 230
Approx wt: 2,650 lbs.
Approx. dim. : 49'' x 27'' x 72'' t
Equipped with:
Coping notcher |
|
Ad # 13883 | Ironworkers |
1989 |
Uni-hydro |
65 -14 |
Good |
sold |
Photo /
More Info. |
65 ton: Uni-hydro 65 ton ironworker model#65-14
punch station, shear station, angle iron
lots of misc size/shape punches included approx :30pc
4" x 4" x 1/2" angle shear capacity
flat bar shear: 1" x 6" or 3/4" x 8" or 1/2" x 12"
mtl stop on angle iron station
36"squaring arm on shear
12" flat bar shear max length
lots of punches & dies includded in bucket shown |
|
Ad # 11335 | Ironworkers |
2004 ? |
Peddinghaus |
110/140 |
Good |
sold |
Photo /
More Info. |
140 Ton: Peddinghaus Ironworker:
Standard Features
Dual Operator Iron Worker with 5 Workstations
Quick change, high-performance punch unit
Plate and Flat Bar Shear with Ledge Table
Gauge Stop and in feed guide
Section Shear for shearing angle iron, rounds and squares
Square or triangular notcher
110 Ton Punch Station
Throat Depth 20"
The Peddinghaus ironworker, Peddimax model 110/140, is a two (2) slide Ironworker, complete with five (5) work stations. Ironworker Ironworker The 110 ton punch slide on this Ironworker is equipped as standard with a universal die block for standard structural steel punching applications for ironworkers. A flat die bolster and die block can be provided as an option. All forces generated in the ironworker through punching, shearing and notching, are equally distributed throughout the slide and body plate frame design, not through the hydraulic cylinder. This design eliminates shock and stress on the ironworker hydraulic system
Angle (L1):6" / 152.4 mm
Angle (L2):6" / 152.4 mm
Angle (T):0.500 " / 12.7 mm
Tonnage:110T / 99.8 t
Power:10hp / 10.0
Stroke:2" / 50.8 mm |
|
Ad # 10839 | Ironworkers |
|
Dvorak |
314 |
Good |
sold |
Photo /
More Info. |
30: Little Scotchman Iron Worker Model 314.
This is a single phase machine. Has a full set of
Punches for the unit. Over 20 Punches.
$4000 for Unit and punches.
Have other Machine Shop Tools and Equipment For
Sale.
Iron Worker, Lathe, band saw, drill, wielder,
machine shop equipment
|
|
Ad # 5498 | Ironworkers |
1982 |
MUBEA |
HIW600 |
Good |
SOLD |
Photo /
More Info. |
66 TON MUBEA HYDRAULIC IRONWORKER: PUNCH CAPACITIES:
TONS ------------------------------------ 66
DIAMETER THRU THICKNESS ----- 1-1/8" THRU 11/16"
DIAMETER THRU THICKNESS ----- 15/16" THRU 7/8"
THROAT DEPTH ------------------------------ 10"
LENGTH OF STROKE -------------------------- 4"
SHEARING CAPACITIES:
ANGLES, 90 DEGREE --------------- 5" X 5" X 1/2"
ROUND BARS ------------------------------ 1-3/8"
SQUARE BARS ----------------------------- 1-1/4"
FLAT BARS ------------------------- 8" X 1"
FLAT BARS ------------------------- 18" X 1/2"
MAIN DRIVE MOTOR --------------------- 10 HP A.C.
EQUIPPED WITH ---
2 SLIDES
5 WORK STATIONS
COPER/NOTCHER
2 FOOT CONTROLS |
|
Ad # 9564 | Ironworkers |
|
Scotchman |
314-C |
Good |
Sold |
Photo /
More Info. |
40 Ton Ironworker=-single phase: 40 Ton Scotchman Ironworker
Model 314-C 3 hp.
1 phase, 220 V.
Angle shear 3"x3"x0.25",
Flat shear 13.75"x0.25",
Hole punch 6" wide,
hole 1"x0.5". |
|
Ad # 8343 | Ironworkers |
|
Buffalo |
1-1/2 |
Good |
sold |
Photo /
More Info. |
73 TON Buffalo Ironworker: USED 73 TON BUFFALO UNIVERSAL IRONWORKER
Punch-Tonnage:73 Tons
Hole Capacity:1-1/16" Through 3/4"
7/8" Through 7/8"
Throat Depth:20"
SPM Approx.:25
Shear-Plates:5/8"
Flats:6" x 3/4"
Length of Knives:12"
Coper-Angles:3" x 1/2"
Plates:1/2"
Width of Cut:2"
Depth of Cut:3"
Notcher-Angles:3" x 3/8"
Plates:3/8"
Depth of Cut:2-3/4"
Bar Cutter-Rounds:1-7/8"
Squares:1-3/4"
Angles:5" x 5" x 1/2"
EQUIPPED WITH:
Foot Pedal For Operation
Punch & Die Holder
Pushbuttons For Start-Stop
One Shot Oil Lubrication
5 HP 1800 RPM 220/440/3/60 Motor
|
|
Ad # 9677 | Ironworkers |
2006 |
Kingsland |
M80 |
Excellent |
Sold |
Photo /
More Info. |
80 ton: Machine is in excellent condition. Includes die set from 5/16" to 1 1/2" in... |
|
Ad # 5497 | Ironworkers |
1974 |
MUBEA |
"OPTIMA" 48-4 |
Good |
SOLD |
Photo /
More Info. |
48 TON MUBEA "OPTIMA" 48-4 UNIVERSAL MECHANICAL IRONWORKER: WITH 3 CLUTCHES
PUNCHING CAPACITY -------------- 48 TONS
1-1/8" THRU 1/2"
1" THRU 9/16"
THROAT DEPTH ---------------------- 12-5/8"
SECTION SHEAR:
4" X 4" X 3/8" ANGLES AT 90 DEG.
2-1/2" X 2-1/2" X 5/16" ANGLES AT 45 DEG.
3-1/2" X 3/8" TEES
PLATE SHEAR WITH STANDARD 2-1/2 DEG. BLADE:
7-1/2" X 5/16"
3-1/2" X 1/2"
BAR SHEAR:
ROUND 1-3/8"
SQUARE 1-1/4"
COPER NOTCHER:
REGULAR COPING, ANGLES 3" X 5/16"
TRIANGULAR NOTCHING, ANGLES 2-1/2" X 5/16"
STROKES PER MINUTE ------------------------ 55 SPM
MOTOR -------------------------- 2 HP 220/3/60
EQUIPPED WITH ---
EXTRA BLADES AND BIG ASSORTMENT OF PUNCHES |
|
Ad # 11613 | Ironworkers |
1980 |
Scotchman |
5075 |
Good |
sold |
Photo /
More Info. |
50 ton: Scotchman 50 Ton Iron worker
4" angle shear
24" plate shear
Runs Fine.
Comes with some tooling.
|
|
Ad # 15306 | Ironworkers |
2012 |
Peddinghaus |
PeddiMax No.1 |
Excellent |
sold |
Photo /
More Info. |
140 ton: 140 ton Peddinghaus Hydraulic Ironworker
Model: PeddiMax No.1
Year: 2012
Condition: like new
Machine Specifications:
Punch tonnage - 140
Punch stroke, infinitely adjustable - 3/8" to 2"
Punch strokes per minute (3/4mm) - 29
Punch throat depth - 20"
Punch capacity with flat die bolster - 1-1/2" through 1"
Punch capacity with universal die block - 1-1/4" through 1"
Flat bar shear - 20" x 3/4"
Flat bar shear working height - 28.4"
Angle shear capacity - 6" x 6" x 1/2"
Round bar shear - 2"
Square bar shear - 2"
Channels, 90° (with special blades) - up to 8"
I-beams, 90° (with special blades) - up to 8"
Notcher (width x depth) - 2-9/16" x 3-3/8"
Notcher capacity - 1/2"
Oil capacity - 27 gallons
Motor - 15 HP
Approximate dimensions - 80" x 40" x 75" high
Approximate weight - 6,100 lbs
Includes:
• flat shear blades, 201/2 inch long, also for shearing angle iron 45°
• material support table with gauge stops on the flat shear station
• section shear knife for 90° shearing angle iron as well as rounds and squares
• quick-change punching attachment up to 1 1/2 inch Ø, with flat die
bolster, for punches and dies of the blue series or with universal die
block for die no. 3
• height-adjustable swing-way stripper with exchangeable plate
• square notching attachment
• material support table on the notcher station
• two two-stage foot pedals and electrical control elements on the
punch station and the notcher station
• hydraulic low pressure spotter for foot operation
• connecting sockets for external engagement, e.g. via electrical
contact length stop
• integrated hydraulic power pack
• three-phase A.C. motor, 230 / 460 Volt, 60
Includes 2 set of new blades
|
|
Ad # 11538 | Ironworkers |
2005 |
edwards |
65 ton edwards ironwoker |
Excellent |
sold |
Photo /
More Info. |
65 ton edwards: 65 ton PUNCH US--- Metric
Tooling included: 6 x 6 angle shear
Max. Capacity 1-1/16" dia. in 3/4" plate 2.85cm x 1.90cm
Work Height 36" 91.44cm
FLAT BAR SHEAR
Max. Width 3/8" x 24" 0.95cm x 60.96cm
Max. Thick 1/2" x 14" or 1" x 4" 1.27cm x 35.56cm x 2.54cm x 10.16cm
Max. Round 1" 2.54cm
Max. Square 1" 2.54cm
Work Height 33-1/2" 85.09cm
ANGLE SHEAR
Max. Size 5" x 5" x 1/4" or 4" x 4" x 3/8" 12.7cm x 12.7cm x 0.63cm or 10.16cm x 10.16cm x 0.95cm
Work Height 42" 106.68cm
COPER / NOTCHER
Max. Capacity 2-1/2" x 6" x 3/8" 6.35cm x 15.24cm x 0.95cm
Work Height 35-1/2" 90.17cm
OPEN CAVITY
Specifications 11-1/2" wide x 9-3/4" tall 29.21cm x 24.765cm
Work Height 42" 106.68cm
GENERAL SPECS
Rated Capacity 65 ton
Throat Depth 9-3/4" 24.76cm
Open Height 8-1/8" 20.63cm
Shut Height 6-3/4" 17.14cm
Stroke 1-3/8" 3.49cm
Cycle Time 2 seconds
Electric Motor Standard 5 HP, 3 Phase, 208/240 v, 1725 rpm, 14 amp
Hydraulic Pump Size 10-1/2 gpm - 2 stage 39.74L per min - 2 stage
Valve Pressure 2800 psi 193.05bar
Reservoir 17 gallons 64.35L
Cylinder 3-1/2" ram 8.89cm
Dimensions: Base x Height 43" x 42" x 55" 109.22cm x 106.68cm x 139.7cm
Shipping Weight 4220 pounds 1914.15kg
Picture shown not actual machine but identical
Have angle Iron shear acc: 6 x 6 x 1/4" , no punches
very low hrs..
bought 2005 used maybe 10xs come get this tied of moving it around used on race car fab. |
|
Ad # 10529 | Ironworkers |
1992 |
Scotchman |
4014CM |
Very Good |
sold |
Photo /
More Info. |
40 Tons: Scotchman 4014-CM
40 Ton punch station with 6" throat
14" bar shear blades
12" brake acc.
3" angle shear (please see pictures)
Hardly Used
1Phase 230 volt meter
Have aprox. 22 punchs and dies (please see pictures)
Adjustable Stroke Control
Machine is mounted on very nice welded frame with 4 solid steel casters, also.
Has aprox. 30' of electrical cord attached. |
|
Ad # 7810 | Ironworkers |
1978 |
Piranha |
P3 |
Good |
SOLD |
Photo /
More Info. |
50 Ton Hydraulic Ironworker Piranha Model P3: (1) Piranha 50 ton Hydraulic Ironworker
Throat depth - 8"
Open height - 13-1/2"
Closed height w/o die block - 9-1/4"
Stroke length - 4-1/4"
Punch capacity - 50 tons
... material thickness - 13/16" through 3/4"
... strokes per minute - 60 @ 1/2"
... platen table size - 10" x 17"
Bar shear capacity, round - 1/4" to 1-1/2"
Bar shear capacity, square - 1/2" to 1"
Coper-notcher (56 tons) - 2-3/4" x 4" x 1/4"
Plate shear (14-5/8") - 3/4" x 10" , 5/8" x 14"
Angle shear, maximum - 5" x 5" x 3/8"
Hydraulic pump (10.5 GPM) - 2600 PSI, 18 gallons
Motor - 10 HP, 1800 RPM--
|
|
Ad # 7813 | Ironworkers |
|
Piranha |
P-50 |
Good |
Sold |
Photo /
More Info. |
50 Ton Hydraulic Ironworker Piranha Model P-50: Used Piranha 50 Ton Ironworker
Angle Shear Capacity: 5”(L1), 5”(L2), (T) .375”
Tonnage: 50
1 Press brake die and misc. punches & dies.
Dual controls |
|
Ad # 12141 | Ironworkers |
2004 |
unihydro |
90 ton |
Good |
sold |
Photo /
More Info. |
90 ton: 90 ton ironworker
good machine ready to work |
|
Ad # 8345 | Ironworkers |
1980 |
SCOTCHMAN |
7012-24 |
Good |
sold |
Photo /
More Info. |
70 Ton Scotchman 7012-24 Hydraulic Ironworker With Brake Attachment: USED 70 TON SCOTCHMAN HYDRAULIC IRONWORKER With Brake Attachment
Punch-Tonnage:70 Tons
Hole Capacity:1-1/16" Through 3/4" Mild Steel
1-1/4" Through 5/8" Mild Steel
Throat Depth:12"
SPM Approx.:37
Shear-Angles:6" x 6" x 1/2"
Shear-Plate:24" x 1/4" Mild Steel
8" x 3/4" Mild Steel
6" x 1" Mild Steel
Length Of Knives:24"
EQUIPPED WITH:
Joystick For Punch Section &
Shear Section
24" Long Brake Attachment
Angle Shear Attachment
Assortment of Punches & Dies
Pushbuttons For Start - Stop
Hydraulic Pump Driven By
7-1/2 HP 1740 RPM 220/440/3/60 Motor |
|
Ad # 12185 | Ironworkers |
1998 |
Edwards |
JAWS IV |
Excellent |
sold |
Photo /
More Info. |
75 TON: Machine is in excellent shape, evrything works well. Not quite sure of the ... |
|
Ad # 11124 | Ironworkers |
|
Scotchman |
6509 |
Good |
sold |
Photo /
More Info. |
65 ton: 65 ton
Includes set of punches & angle shear |
|
Ad # 13708 | Ironworkers |
1977 |
Metal Muncher |
MM61C |
Good |
sold |
Photo /
More Info. |
49 Ton: Metal Muncher Ironworker 49 Ton
Model: MM61C
Capacity: 49 Ton
Volts: 220 / Single Phase
RATED PUNCHING CAP:49 TON
DIA/THICKNESS: 1-1/16" IN 1/2"
1-3/8" IN 3/4"
BAR SHEAR: 1" X 6", 1/2" X 12"
ANGLE SHEAR: 4" X 4" X 3/8"
COPER SQUARE NOTCHER. 3" X 3" X 3/8"
THROAT: 9"
BED SLOT WIDTH: 4"
OPERATING PRESSURE: 3500 PSI
MOTOR: 7HP
|
|
Ad # 10647 | Ironworkers |
|
Ironcraft |
41/41 |
Good |
SOLD |
Photo /
More Info. |
3" x 3" x 5/16",Ironcrafter,40 Ton,Hyd,Punch,Flats,Sq&Rds,Infd&StockSt: One Each Used - Ironcrafter 40 Ton Hydraulic
Ironworker, Model 41/41, Serial Number 79E193
Specifications:
Punching: 40 Tons, 1" Dia x 1/2" Thick Max (Relational)
Maximum Dia 1-1/4"
Stroke: 2"
Shearing Angles: 3" x 3" x 5/16" at 90 Degrees
2" x 5/16" at 45 Degrees
Round Bar: 1-1/4" and Square Bar at 1"
Flats: 6" x 5/8"
Electrics: Presently on 220/3/60 Htz
Equipped With:
Many Sets Of Assorted Punches & Dies, P40 P & P82 D
Lifting Eyebolt
144" Adjustable Stock Stop
118" Infeed Table With Gravity Roller Holdowns
Condition: Good Operating and Quiet
|
|
Ad # 6466 | Ironworkers |
|
HILL ACME |
3 |
Very Good |
SOLD |
Photo /
More Info. |
4´´ X 4´´ X 1/4´´ HILL ACME #3 HYDRAULIC IRONWORKER: 4´´ X 4´´ X 1/4´´ HILL ACME #3 HYDRAULIC IRONWORKER:
PUNCHING CAPACITY ................... 33 TONS
MAXIMUM DIAMETER THROUGH THICKNESS .. 1-1/16´´ X 3/8´´
DIAMETER THROUGH MAXIMUM THICKNESS .. 7/8´´ X 1/2´´
DEPTH OF THROAT ..................... 12-1/2´´
LENGTH OF STROKE .................... 1´´
SHEARING CAPACITIES:
ANGLES .............................. 4´´ X 4´´ X 1/4´´
ANGLE AT 45 DEGREE .................. 2-1/4´´ X 2-1/4´´ X 1/4´´
FLATS ............................... 6´´ X 1/2´´
LENGTH OF PLATE SHEAR BLADES ........ 9´´
ROUNDS .............................. 1-1/4´´
SQUARES ............................. 1-1/8´´
COPER ON SHEAR END
5 HORSEPOWER MAIN MOTOR |
|
Ad # 8340 | Ironworkers |
1986 |
SCOTCHMAN |
12012 |
Good |
Sold |
Photo /
More Info. |
120 TON SCOTCHMAN HYDRAULIC IRONWORKER: USED 120 TON SCOTCHMAN HYDRAULIC IRONWORKER
Punch - Tonnage:120 Tons
Hole Capacity:1-1/2" In 1" Mild Steel
Throat Depth:12"
SPM Approx.:37
Shear-Angles:6" x 6" x 1/2"
Plates:24" x 1/2" Mild Steel 18" x 5/8" Mild Steel
16" x 3/4" Mild Steel
12" x 1" Mild Steel
Length of Knives:24"
EQUIPPED WITH:
Electric Foot Switch
Pushbuttons For Start - Stop
Selector Switch For Shear Section -
Punch Section
Angle Shear Attachment
Assortment Of Punches & Dies
Punch & Die Holder
Hydraulic Pump Driven By
7-1/2 HP 1800 RPM 440/3/60 Motor
|
|
Ad # 12664 | Ironworkers |
1981 |
scotchman |
4014-TM |
Good |
sold |
Photo /
More Info. |
40 ton w/ 6 station punch turret: Scotchman Ironworker
Model 4014-TM
40 ton w/ 6 station punch turret
5 HP
220/1 single Phase-home shop ready!!!!
Specifications:
Punch tonnage 40 ton
Punch capacity 1" through 1/2"
Flat bar shearing length 14"
Flag bar shearing capacity 5/8" x 5" to 3/16" x 14"
Angle shear capacity 3" x 3" x 1/4"
Channel 2" max.
Round bar 3/4"
Square bar 3/4"
Hydraulic system pressure 1450
Approximate dimensions 4' x 2' x 5' high
Approximate weight 2,000 lbs.
Included acc: brake & angle shear ,plus lots of punches & flat bar shear adj. stop rod |
|
Ad # 11272 | Ironworkers |
1977 |
Peddinghaus |
210 Super 13 |
Good |
sold |
Photo /
More Info. |
66 Short Tons Mechanical Ironworker: Peddinghaus Model # 210 Super 13
66 Short Tons, with some Tooling |
|
Ad # 8346 | Ironworkers |
|
Proma Omes |
CH-70 |
Good |
Sold |
Photo /
More Info. |
70 Ton Hydraulic Ironworker: USED 70 TON PROMA-OMES IRONWORKER
Hydraulic
Punch-Tonnage:70 Tons
Hole Capacity:1-1/8" Through 3/4" Mild Steel
Throat Depth:12"
Section Shear-Angles(90dg):5" x 5" x 1/2"
Angles(45dg):3" x 3" x 3/8"
Flats Iron:18" x 5/8"
12" x 3/4"
Length Of Knives: 18"
Bar Cutter-Rounds:1-3/4"
Squares:1-3/4"
Notcher:15/32"
EQUIPPED WITH:
Electric Foot Switch
Selector Switches For Run - Jog -
Full PSI & Low PSI
Pushbuttons For Hydraulic On - Off
Emergency Stop Button
Punch & Die Holder
Hydraulic Pump Driven By
5 HP 1800 RPM 220/440/3/60 Motor
|
|
Ad # 12264 | Ironworkers |
1976 |
Mubea |
KBL 100-50 |
Good |
sold |
Photo /
More Info. |
100 Ton-mechanical trype: Mubea-KBL 100-50
100 Ton
Shear 10" x 3/4" Max
Round Shear 2" 3/16
Hole Punch 2" 3/8 x 1" 3/8
T Slot 4" x 1/2"
Note:see tag pic for more details.. |
|
Ad # 8352 | Ironworkers |
|
Scotchman |
314 |
Good |
sold |
Photo /
More Info. |
35 Ton SCOTCHMAN IRONWORKER: USED 35 Ton SCOTCHMAN IRONWORKER
CAPACITIES:
Punch-Tonnage:35 Tons
Hole Capacity:1-1/4" - 1/4" Mild Steel
7/8" - 1/2" Mild Steel
Throat Depth:3-1/2"
S.P.M. Approx.:55 - Light Material
9-Maximum Capacity
Shear-Angles:3" x 3" x 1/4" Mild Steel
Flat Bar: 6" x 1/2" Mild Steel
Length of Knives:7"
EQUIPPED WITH:
Foot Switch For Operation
Pushbuttons For Start - Stop
Punch & Die Holder
Hydraulic Pump Driven by
3 HP 1755 RPM 230/460/3/60 Motor
|
|
Ad # 6467 | Ironworkers |
|
HILL ACME |
#3 HYDRAULIC |
Very Good |
SOLD |
Photo /
More Info. |
4´´ X 4´´ X 1/4´´ HILL ACME #3 HYDRAULIC IRONWORKER: 4´´ X 4´´ X 1/4´´ HILL ACME #3 HYDRAULIC IRONWORKER:
PUNCHING CAPACITY .................... 33 TONS
MAXIMUM DIAMETER THROUGH THICKNESS ... 1-1/16´´ X 3/8´´
DIAMETER THROUGH MAXIMUM THICKNESS ... 7/8´´ X 1/2´´
DEPTH OF THROAT ...................... 12-1/2´´
LENGTH OF STROKE ..................... 1´´
SHEARING CAPACITIES:
ANGLES ............................... 4´´ X 4´´ X 1/4´´
ANGLE AT 45 DEGREE ................... 2-1/4´´ X 2-1/4´´ X 1/4´´
FLATS ................................ 6´´ X 1/2´´
LENGTH OF PLATE SHEAR BLADES ......... 9´´
ROUNDS ............................... 1-1/4´´
SQUARES .............................. 1-1/8´´ |
|
Ad # 9767 | Ironworkers |
|
Hill Acme Kling |
No. 5 |
Good |
SOLD |
Photo /
More Info. |
80: Plates up to 5/8
Flat bars up to 3/4x6
Square bars up to 1 3/4
Round bars up to 1 7/8
Angles square up to 5x5x1/2
Max punch 1 1/16 hole thru 3/4 plate |
|
Ad # 9283 | Ironworkers |
2005 |
Kingsland |
60P625-24" throat |
New |
SOLD |
Photo /
More Info. |
50 US tons: New Kingsland Hydraulic Ironworker. Modele #60P625-24" throat
comes with new automatic positioning unit x 20ft
Modele # KA-11D-20ft
Factory Specs below-verify
MULTI 60 Ton Punching
Max. Punching Capacity
1-1/4"" hole in 1/2" steel 1" hole in 3/4" steel
Stroke Length
2-1/8"
Standard throat (D option)
12" or (25")
Largest Hole (optional)
2-1/4" (6-3/8")
Cycles/min. - 3/4" travel
34
Working Height
40-1/2"
Shearing
Flat bar, max. thickness
9" x 3/4"
Flat bar, max. width
14-3/8' x 3/8"
Angle flange trim/max 45 deg
4" x 5/8"
Angle Cutting
90 deg. cutting
5-3/16" x 1/2"
45 deg. mitre cutting
2-3/4" x 3/8"
working height
44-1/2"
Section Cutting
round/square
1-3/4"
Channel/beam (option)
5-3/16" x 2-1/2"
T-profile (option)
3-1/2" x 1/2" 3
Notching
Material thickness
3/8"
width - rectangle
1-3/4"
depth - rectangle
3-1/2"
depth - vee
2-3/8"
angle flange - max. profile
4" x 3/8"
working height
35"
Specifications
Motor
7.5 HP
Nett. Weight
3,462 lbs
Machine Dims. (LxWxH)
65" x 28" x 70"
|
|
Ad # 4189 | Ironworkers |
1990 |
GEKA |
Geka Hydracrop #55A |
Very Good |
Sold |
No Photo /
More Info. |
GEKA 55-TON HYDRAULIC IRONWORKER :
IRONWORKERS
4" x 4" x 1/2" Geka Hydracrop #55A ,55 Ton, 20"thr,work tbl.w/gauge,12" shear
Capacity 55 Tons
Shear Capacities:
Maximum Flats: 5/8" x 12" or 3/4" x 8"
Maximum Angles: 4" x 4" x 1/2" or 4-1/2" x 4-1/2" x 3/8"
Maximum Bar: 1-9/16" Round & Square
Maximum Punch: 1-1/8" x 1/2" or 3/4" x 3/4"
Maximum Notch: 1-5/8" x 3-1/2" x 3/8" Thick
Throat Depth 20"
Stroke Speed 43
Motor 6½ H.P. 230/460 Volt, 3 Phase
Equipped With:
20" Deep Punch End Throat
Work Table on Punch and Coper Ends w/ Adjustable Back Stops
Electric Length Gauge
Electric Foot Pedals
20 plus punches & dies
Worklight |
|
Ad # 7929 | Ironworkers |
1986 |
Scotchman |
6509-24M |
Very Good |
Sold |
Photo /
More Info. |
65 Ton Scotchman Ironworker: Included Acc: rod shear, 24" brake , 6 x 6 x 3/8" angle shear , lots & lots... |
|
Ad # 3214 | Ironworkers |
80's? |
Peddinghaus |
210/11 |
Good |
sold |
No Photo /
More Info. |
40 Ton Machanical Ironworker: 40 Ton
20" throat on punch
Dual operator Station
Includes several punches & Dies |
|
Ad # 12765 | Ironworkers |
1992 |
Rogers Manufacturing |
Presshear 10# |
Good |
sold |
Photo /
More Info. |
18 Ton: Rogers Manufacturing -Presshear # 10
Power Ironworker
PRESSHEAR # 10
PUNCH CAPACITY - 18 TONS
ACCESSORIES SOLD SEPARATELY
PIPE NOTCHER - SPEAR POINT
BENDING DIE - COPER
SQUARE TUBING CUTTER
NOTCHER - PUNCH OILING SYSTEM
This machine is both a punch and a shear.
Cast-frame - high tensile ductile iron.
Operates on 1 HP, 1750 RPM motor. Three phase or single phase available.
Foot operated, one stroke safety clutch.
Front is conventional press and can be used for punching or forming
Regular die sets will fit this machine
Adjustable ram.
Hold-down easily adjusted.
Punch can be lowered to material for center punching and will remain until clutch is engaged.
Blades are tool steel - Can be re-sharpened and adjusted.
Punch to back of throat - 3"
Bar hole for lowering punch by hand.
Blade guard, foot lever guard, and gear guard for operators protection
Approximately 48 strokes per minute.
basic specs below-lots of acc availablr for this machine
Punch 3/4 x 1/4
Throat 3"
2" x 2" x 1/4 Angle Iron
3/4" Round
3/4" Square
1/4"x 4" Flats
2 x 1/2 x 1/8" channel
punches 7/8" round hole thru 1/4" mtl
2" stroke
shut height : 6-1/2"
2" Stroke
more details at http://www.rogers-mfg-inc.com/
|
|
Ad # 9772 | Ironworkers |
2004 |
Scotchman |
4014-CM |
Very Good |
Sold |
Photo /
More Info. |
40 ton: 40 ton punch press/flat shear/angle shear. throat depth 6", flat shear leng... |
|
Ad # 12857 | Ironworkers |
? |
Geka |
Micro Crop 36 |
Good |
sold |
Photo /
More Info. |
36 ton cap-Mild Steel: Geka Ironworker
Micro Crop 36
90 Degree Max. 3" x 3" x 5/16
45 Degree Max. 2" x 2"
220/440 Voltage
60 Cycle
Made in Spain
Capacity: Mild Steel
low hrs little use |
|
Ad # 14654 | Ironworkers |
|
Scotchman |
6509 |
Good |
sold |
Photo /
More Info. |
65 Ton: 65 TON SCOTCHMAN HYDRAULIC IRONWORKER
Model 6509
Punch Tonnage: 65 Tons
Hole Capacity: 1-1/16" in 3/4" Mild Steel
Throat Depth: 9"
SPM Approx.: 40
Angle Shear:
(90°): 6" x 6" x 3/8" Mild Steel
(45°): 4" x 4" x 1/2" Mild Steel
Flat Bar Shear:
24" x 1/4" Mild Steel
12" x 1/2" Mild Steel
8" x 3/4" Mild Steel
Length of Knives: 24"
EQUIPPED WITH:
Remote Foot Switch
Angle Shear
Miscellaneous Punches & Dies |
|