Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9825 | Ironworkers |
|
|
|
|
Sold |
Photo /
More Info. |
WEIDEMANN 12 POSITION TURRET PUNCH : IN EXCELLENT SHAPE |
|
Ad # 9495 | Ironworkers |
1999 |
EDWARDS |
|
Good |
sold |
No Photo /
More Info. |
75 TON EDWARDS: |
|
Ad # 10748 | Ironworkers |
|
Scotchman |
|
Very Good |
Sold |
Photo /
More Info. |
: Scotchman Ironworker
This is a lightly used Ironworker in excellent shape ready to go to work
|
|
Ad # 10747 | Ironworkers |
|
Scotchman |
|
|
sold |
Photo /
More Info. |
20 ton: Scotchman Ironworker/ shear/ punch/ angle iron shear
20 ton capacity
Older model, but saves money versus drilling &
torching
has punches & small v-block bending die
|
|
Ad # 10746 | Ironworkers |
|
Scotchman |
4014T |
Good |
sold |
Photo /
More Info. |
: Scotchman 4014T ironworker
Ironworker with turrent. 220v, 1phase
|
|
Ad # 13708 | Ironworkers |
1977 |
Metal Muncher |
MM61C |
Good |
sold |
Photo /
More Info. |
49 Ton: Metal Muncher Ironworker 49 Ton
Model: MM61C
Capacity: 49 Ton
Volts: 220 / Single Phase
RATED PUNCHING CAP:49 TON
DIA/THICKNESS: 1-1/16" IN 1/2"
1-3/8" IN 3/4"
BAR SHEAR: 1" X 6", 1/2" X 12"
ANGLE SHEAR: 4" X 4" X 3/8"
COPER SQUARE NOTCHER. 3" X 3" X 3/8"
THROAT: 9"
BED SLOT WIDTH: 4"
OPERATING PRESSURE: 3500 PSI
MOTOR: 7HP
|
|
Ad # 5497 | Ironworkers |
1974 |
MUBEA |
"OPTIMA" 48-4 |
Good |
SOLD |
Photo /
More Info. |
48 TON MUBEA "OPTIMA" 48-4 UNIVERSAL MECHANICAL IRONWORKER: WITH 3 CLUTCHES
PUNCHING CAPACITY -------------- 48 TONS
1-1/8" THRU 1/2"
1" THRU 9/16"
THROAT DEPTH ---------------------- 12-5/8"
SECTION SHEAR:
4" X 4" X 3/8" ANGLES AT 90 DEG.
2-1/2" X 2-1/2" X 5/16" ANGLES AT 45 DEG.
3-1/2" X 3/8" TEES
PLATE SHEAR WITH STANDARD 2-1/2 DEG. BLADE:
7-1/2" X 5/16"
3-1/2" X 1/2"
BAR SHEAR:
ROUND 1-3/8"
SQUARE 1-1/4"
COPER NOTCHER:
REGULAR COPING, ANGLES 3" X 5/16"
TRIANGULAR NOTCHING, ANGLES 2-1/2" X 5/16"
STROKES PER MINUTE ------------------------ 55 SPM
MOTOR -------------------------- 2 HP 220/3/60
EQUIPPED WITH ---
EXTRA BLADES AND BIG ASSORTMENT OF PUNCHES |
|
Ad # 6467 | Ironworkers |
|
HILL ACME |
#3 HYDRAULIC |
Very Good |
SOLD |
Photo /
More Info. |
4´´ X 4´´ X 1/4´´ HILL ACME #3 HYDRAULIC IRONWORKER: 4´´ X 4´´ X 1/4´´ HILL ACME #3 HYDRAULIC IRONWORKER:
PUNCHING CAPACITY .................... 33 TONS
MAXIMUM DIAMETER THROUGH THICKNESS ... 1-1/16´´ X 3/8´´
DIAMETER THROUGH MAXIMUM THICKNESS ... 7/8´´ X 1/2´´
DEPTH OF THROAT ...................... 12-1/2´´
LENGTH OF STROKE ..................... 1´´
SHEARING CAPACITIES:
ANGLES ............................... 4´´ X 4´´ X 1/4´´
ANGLE AT 45 DEGREE ................... 2-1/4´´ X 2-1/4´´ X 1/4´´
FLATS ................................ 6´´ X 1/2´´
LENGTH OF PLATE SHEAR BLADES ......... 9´´
ROUNDS ............................... 1-1/4´´
SQUARES .............................. 1-1/8´´ |
|
Ad # 11448 | Ironworkers |
1980 |
Hill ACME |
#6 |
Excellent |
sold |
Photo /
More Info. |
95 Ton 15hp: Hill ACME 95 Ton
Dual Foot Switch
24" Throat Depth
Punching Capacity
1-1/4" Thru 7/8" ; 1-3/16" Thru 1"
1-1/2" Stroke 65 SPM
Plate Shear
6" x 1-1/8" 10" x 3/4" 14" x 1/2"
Bar Shear
2-3/16" Round 2" Square
Angle Stock
6" x 6" x 1/2" 4" x 4" x 1/2" Tees
Notcher
Rectangular........3-1/4" x 3-1/4" x 1/2"
90 Degree V.......1/2" x 2-1/4" Deep
|
|
Ad # 8343 | Ironworkers |
|
Buffalo |
1-1/2 |
Good |
sold |
Photo /
More Info. |
73 TON Buffalo Ironworker: USED 73 TON BUFFALO UNIVERSAL IRONWORKER
Punch-Tonnage:73 Tons
Hole Capacity:1-1/16" Through 3/4"
7/8" Through 7/8"
Throat Depth:20"
SPM Approx.:25
Shear-Plates:5/8"
Flats:6" x 3/4"
Length of Knives:12"
Coper-Angles:3" x 1/2"
Plates:1/2"
Width of Cut:2"
Depth of Cut:3"
Notcher-Angles:3" x 3/8"
Plates:3/8"
Depth of Cut:2-3/4"
Bar Cutter-Rounds:1-7/8"
Squares:1-3/4"
Angles:5" x 5" x 1/2"
EQUIPPED WITH:
Foot Pedal For Operation
Punch & Die Holder
Pushbuttons For Start-Stop
One Shot Oil Lubrication
5 HP 1800 RPM 220/440/3/60 Motor
|
|
Ad # 8348 | Ironworkers |
|
Buffalo |
1/2 |
Good |
Sold |
Photo /
More Info. |
58 Ton Buffalo Ironworker: USED 58 TON BUFFALO IRONWORKER
Punch-Tonnage:58 Tons
Hole Capacity:1-1/16" Through 5/8"
Throat Depth:20"
SPM Approx.:44
Shear-Flats:9-3/8" x 1/4"
9" x 3/8"
8-1/8" x 1/2"
7" x 5/8"
Length Of Knives:9-3/4"
Bar Cutter-Rounds:1-5/8"
Squares:1/2" to 1-1/2"
Angles:4" x 4" x 1/2"
Notcher-Angles:3" x 3/8"
Plates:5/16"
Depth of Cut:2-3/4"
EQUIPPED WITH:
Foot Pedal For Operation
Pushbuttons For Start - Stop
Assortment of Punches & Dies
Punch & Die Holder
3 HP 1750 RPM 230/460/3/60 Motor
|
|
Ad # 15250 | Ironworkers |
1953 |
Buffalo |
1/2 |
Good |
sold |
Photo /
More Info. |
58 ton: Buffalo #1/2 mechanical Ironworker
std mfg specs below Specifications
Punch ram pressure:58 tons
Punch throat:20"
Working height:38-7/16"
Punch number:664
Die number:14020
OD of die x height:2" x 1-1/8"
Die gauge line:7/8"
Flywheel RPM:307
Strokes per minute:44
Length of punch stroke:1-1/16"
Capacity of punch:1" x 5/8"; 13/16" x 3/4"
Angle shear capacity at 90 degrees:4" x 4" x 1/2"
Angle shear capacity at 45 degrees:3" x 3" x 5/16"
Length of angle shear stroke:1-1/2"
Rounds:1-5/8"
Squares:1-1/2"
Notcher:3" x 3" x 5/16"
Coper:2" x 3" x 3/8"
Motor:3 HP
Volts:208-220/440
Phase:3 Cycles 60
Amps:8.7-8.7/4.35
Approximate dimensions
73" x 50 x 82" high
Approximate weight:4,300 lbs
It can punch 13/16 in 3/4 plate,larger in thinner steel.It can shear 3x6x3/8 angle,5/8x6 flatbar and shear up to 1/2 plate of unlimited width using the bypass feature.
It can also punch to the center of a 2x2"angle iron leg.It will shear 1-5/8" round bar and depending on the tooling package do a whole lot more. |
|
Ad # 11335 | Ironworkers |
2004 ? |
Peddinghaus |
110/140 |
Good |
sold |
Photo /
More Info. |
140 Ton: Peddinghaus Ironworker:
Standard Features
Dual Operator Iron Worker with 5 Workstations
Quick change, high-performance punch unit
Plate and Flat Bar Shear with Ledge Table
Gauge Stop and in feed guide
Section Shear for shearing angle iron, rounds and squares
Square or triangular notcher
110 Ton Punch Station
Throat Depth 20"
The Peddinghaus ironworker, Peddimax model 110/140, is a two (2) slide Ironworker, complete with five (5) work stations. Ironworker Ironworker The 110 ton punch slide on this Ironworker is equipped as standard with a universal die block for standard structural steel punching applications for ironworkers. A flat die bolster and die block can be provided as an option. All forces generated in the ironworker through punching, shearing and notching, are equally distributed throughout the slide and body plate frame design, not through the hydraulic cylinder. This design eliminates shock and stress on the ironworker hydraulic system
Angle (L1):6" / 152.4 mm
Angle (L2):6" / 152.4 mm
Angle (T):0.500 " / 12.7 mm
Tonnage:110T / 99.8 t
Power:10hp / 10.0
Stroke:2" / 50.8 mm |
|
Ad # 12177 | Ironworkers |
2004 ? |
Peddinghaus |
110/140 |
Good |
sold |
Photo /
More Info. |
110/140: |
|
Ad # 8340 | Ironworkers |
1986 |
SCOTCHMAN |
12012 |
Good |
Sold |
Photo /
More Info. |
120 TON SCOTCHMAN HYDRAULIC IRONWORKER: USED 120 TON SCOTCHMAN HYDRAULIC IRONWORKER
Punch - Tonnage:120 Tons
Hole Capacity:1-1/2" In 1" Mild Steel
Throat Depth:12"
SPM Approx.:37
Shear-Angles:6" x 6" x 1/2"
Plates:24" x 1/2" Mild Steel 18" x 5/8" Mild Steel
16" x 3/4" Mild Steel
12" x 1" Mild Steel
Length of Knives:24"
EQUIPPED WITH:
Electric Foot Switch
Pushbuttons For Start - Stop
Selector Switch For Shear Section -
Punch Section
Angle Shear Attachment
Assortment Of Punches & Dies
Punch & Die Holder
Hydraulic Pump Driven By
7-1/2 HP 1800 RPM 440/3/60 Motor
|
|
Ad # 11608 | Ironworkers |
2001 |
Scotchman |
12012-24M |
Very Good |
sold |
Photo /
More Info. |
120 ton: Scotchman model 12012-24m
120 Ton
5 HP
Punch 1 1/2" Hole in 1"
Shear capacity:1" x 12";3/4" x 16";1/2" x 24"
Angle shear 6" x 6" x 1/2" included
1 1/4" Round Bar max capacity
1" Square Bar capacity
12" Throat on punch
notcher acc
13" x 24" Punch Table included
a few misc punches included
foot pedal
new blades |
|
Ad # 9687 | Ironworkers |
|
pedinghaus |
210 AD/20 |
Good |
sold |
Photo /
More Info. |
210 ton mechanical : 210 ton mech. type
6x6x1/2 capacity
V-notcher-4x4x1/2
flat bar shear-13-3/8x1/2
2-5/16 max hole punch
19" throat on punch
punch cap.-1-3/16thx7/8 thick or 1x1 hole
tooling-lots of punches & dies |
|
Ad # 10320 | Ironworkers |
|
Pettinghouse |
210 super 13 |
Good |
sold |
Photo /
More Info. |
30 ton: 60 MP capacity -30 ton
will punch 7/8" hole in 1" mtl
angle shear 4 x 4
bar shear
8" flat bar shear in 1" mtl
coper/notcher
dual foot pedals
includes: punches: 1/8" up to 1" with some shapes..slots, squares. approx 50 punches
|
|
Ad # 11272 | Ironworkers |
1977 |
Peddinghaus |
210 Super 13 |
Good |
sold |
Photo /
More Info. |
66 Short Tons Mechanical Ironworker: Peddinghaus Model # 210 Super 13
66 Short Tons, with some Tooling |
|
Ad # 3214 | Ironworkers |
80's? |
Peddinghaus |
210/11 |
Good |
sold |
No Photo /
More Info. |
40 Ton Machanical Ironworker: 40 Ton
20" throat on punch
Dual operator Station
Includes several punches & Dies |
|
Ad # 7797 | Ironworkers |
|
Peddinghaus |
210A/16 |
Good |
Sold |
Photo /
More Info. |
70 Ton Mechanical Ironworker Peddinghaus Model 210A/16: Specifications:
Capacity 70 Tons
Punch Capacity1-1/16” in ¾” or 7/8” in 7/8”
Angle Capacity5” x 5” x ½” @ 90 deg
Flat4-3/8” x 1” or 11” x 3/8”
Notcher 9/16”
Speed45 SPM |
|
Ad # 6466 | Ironworkers |
|
HILL ACME |
3 |
Very Good |
SOLD |
Photo /
More Info. |
4´´ X 4´´ X 1/4´´ HILL ACME #3 HYDRAULIC IRONWORKER: 4´´ X 4´´ X 1/4´´ HILL ACME #3 HYDRAULIC IRONWORKER:
PUNCHING CAPACITY ................... 33 TONS
MAXIMUM DIAMETER THROUGH THICKNESS .. 1-1/16´´ X 3/8´´
DIAMETER THROUGH MAXIMUM THICKNESS .. 7/8´´ X 1/2´´
DEPTH OF THROAT ..................... 12-1/2´´
LENGTH OF STROKE .................... 1´´
SHEARING CAPACITIES:
ANGLES .............................. 4´´ X 4´´ X 1/4´´
ANGLE AT 45 DEGREE .................. 2-1/4´´ X 2-1/4´´ X 1/4´´
FLATS ............................... 6´´ X 1/2´´
LENGTH OF PLATE SHEAR BLADES ........ 9´´
ROUNDS .............................. 1-1/4´´
SQUARES ............................. 1-1/8´´
COPER ON SHEAR END
5 HORSEPOWER MAIN MOTOR |
|
Ad # 8353 | Ironworkers |
|
Kling |
3 |
Good |
Sold |
Photo /
More Info. |
33 Ton KLING HYDRAULIC IRONWORKER: USED 33 Ton KLING IRONWORKER
CAPACITIES:
Tonnage:33 Tons
Punch:11/16" Hole Thru 1/2" Plate
Shear-Plates:3/8"
Flat Bars:4" x 1/2"
Square:1-1/4"
Round:1-3/8"
Angles:4" x 4" x 1/4"
Length of Blade:9"
Coper-Angles:2-1/4" x 2-1/4" x 1/4"
Plates:1/4"
Angles-Mitre:2-1/2" x 2-1/2" x 1/4"
Tees-Square:3" x 3" x 1/4"
S.P.M. Approx.:35 @ 3/8" Length Maximum
20 @ 1" Length Minimum
EQUIPPED WITH:
Foot Pedal Operation
Punch & Die Holder
Pushbuttons For Start - Stop
2 HP 1740 RPM 220/440/3/60 Motor
|
|
Ad # 9213 | Ironworkers |
|
custom |
30 ton ?? |
Good |
Sold |
Photo /
More Info. |
10-25 tons capacity-?: machine that will cut
4.5" flat bar shear
10-25 tons ??
3 x 3 angle iron shear
rod shear 1.5,1",3/4",1/2",3/8",1/4" Dia.
hole punch- approx 1" ??
40 ton 5" dia. cylinder
|
|
Ad # 14468 | Ironworkers |
80's? |
Iron crafter |
30-30 |
Good |
sold |
Photo /
More Info. |
30 ton-single phase 110/1: Iron Worker: Iron Crafter
single phase 110/1
Model 30-30
30 Ton
2” stroke
capacities:
punch: 1" hole thru 3/8" MS\ild steel
flat bar:1/2" x 6"
angle iron:3" x 3" x 1/4"
mitre angle iron @ 45 deg : 2 x 2 x 1/4"
round:1"
square: 3/4"
120V single phase
Large quantity of tooling over 75
punches & dies many new also oversize hole punch
plate tooling and cusom punch holder table. Great
home shop or farm machine!
|
|
Ad # 11998 | Ironworkers |
95 |
Dvorak |
314 |
Excellent |
sold |
Photo /
More Info. |
40 Ton: Dvorak Iron Worker
Model 314
220 single Phase
40 Ton
Angle Shear
3" x 3" x 1/4"
Shear
1/2 x 6"
3/16 x 12"
Punch 1" 1/4" x 1/4"
|
|
Ad # 10749 | Ironworkers |
|
Scotchman |
314 |
Good |
SOLD |
Photo /
More Info. |
30 ton: Scotchman 30 ton Ironworker Mod. 314
50 dies valued at 60.00 per die being given away with machine for free: both going together either way.
|
|
Ad # 10839 | Ironworkers |
|
Dvorak |
314 |
Good |
sold |
Photo /
More Info. |
30: Little Scotchman Iron Worker Model 314.
This is a single phase machine. Has a full set of
Punches for the unit. Over 20 Punches.
$4000 for Unit and punches.
Have other Machine Shop Tools and Equipment For
Sale.
Iron Worker, Lathe, band saw, drill, wielder,
machine shop equipment
|
|
Ad # 8352 | Ironworkers |
|
Scotchman |
314 |
Good |
sold |
Photo /
More Info. |
35 Ton SCOTCHMAN IRONWORKER: USED 35 Ton SCOTCHMAN IRONWORKER
CAPACITIES:
Punch-Tonnage:35 Tons
Hole Capacity:1-1/4" - 1/4" Mild Steel
7/8" - 1/2" Mild Steel
Throat Depth:3-1/2"
S.P.M. Approx.:55 - Light Material
9-Maximum Capacity
Shear-Angles:3" x 3" x 1/4" Mild Steel
Flat Bar: 6" x 1/2" Mild Steel
Length of Knives:7"
EQUIPPED WITH:
Foot Switch For Operation
Pushbuttons For Start - Stop
Punch & Die Holder
Hydraulic Pump Driven by
3 HP 1755 RPM 230/460/3/60 Motor
|
|
Ad # 5984 | Ironworkers |
1985 |
Scotchman |
314-C |
Good |
Sold |
Photo /
More Info. |
40 Ton Scotchman 314-C Ironworker: Model: 314-C
Flat Bar Capacity:
Punch Capacity:
Angle Shear Capacity: 3" x 3" x 0.25"
Tonnage: 40
Specification Description
TONNAGE 40 TON
BAR SHEAR 14"
ANGLE SHEAR 3"
WEIGHT 1300 LBS
Model 314C -std specs-verify..
Throat depth 6"
Punching: 1" diameter x 1/2" thick, 11/4" diameter x 3/8" thick
Cropping: angle 3" x 3" x 5/16" @ 90 degrees, 2" x 2" x 5/16" @ 45 degrees
Shearing: 10" x 1/4", 6" x 1/2", 5" x 5/8"
Dimensions: 4' Length x 2'4" Width x 4'4" Height
Power: 3 HP
|
|
Ad # 9564 | Ironworkers |
|
Scotchman |
314-C |
Good |
Sold |
Photo /
More Info. |
40 Ton Ironworker=-single phase: 40 Ton Scotchman Ironworker
Model 314-C 3 hp.
1 phase, 220 V.
Angle shear 3"x3"x0.25",
Flat shear 13.75"x0.25",
Hole punch 6" wide,
hole 1"x0.5". |
|
Ad # 9772 | Ironworkers |
2004 |
Scotchman |
4014-CM |
Very Good |
Sold |
Photo /
More Info. |
40 ton: 40 ton punch press/flat shear/angle shear. throat depth 6", flat shear leng... |
|
Ad # 13893 | Ironworkers |
1992 |
Scotchman |
4014-CM |
Good |
sold |
Photo /
More Info. |
40 Ton Hyd.: Scotchman 4014-CM Ironworker
40 Ton Punch Station (1" in 1/2")
Keyed Punch Ram for Safety
3HP
6" Throat Depth
2" Die Holder
8" brake acc included
angle iron shear included
shear stop arm-included
Punch Nut with Wrench and Stripper
One Round Punch & Die: Max. Dia. 1"
Adjustable Stroke Control
Angle Shear Capacity:
3" x 3" x 5/16" at 90° and 2" x 2" x 1/4" at 45°
14" Flat Bar Shear with 4-Way Reversible Blade (1/2" x 6", 3/16" x 14")
Tool Table Work Area
Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations
230 volt /3 Phase Electrics
(All Guards Necessary to Comply with ANSI B 11-5 Standards
Fork Lift Accommodations
Made in USA
Note:Nice unit: angle shear included Also lots of misc punches and punch table fixtures
Std. factory specs below
Rated on: 65,000 PSI
Tensile A 36 Mild Steel
Punching Capacity 40 Ton
1" in 1/2"
Special Tooling 2-1/4" Max.Dia
Throat Depth 6" /150 mm
Flat Bar Shear 14" Length
1/2" x 6"
3/8" x 10"
1/4" x 12"
3/16" x 14"
Opt. Saber Blade 1/2" x 8" or 1/4" x 14"
Angle Shear 90 3" x 3" x 5/16"
Angle Shear 45 2" x 2" x 1/4"
Brake 8" 25 Ton
Brake 12" 20 ton -optional
Pipe Notcher Schedule 40 I.D. 3/4", 1",1-1/4",
1-1/2", 2" -optional
Rectangle Notcher 2" x 1-3/4" x 1/4"-optional
90 V. Notcher 6" x 6" x 1/8"
Rod/Angle Combo-optional
Angle Shear:2" x 2" x 1/4"
Round Rod:3/4" Max
Square Rod :3/4" Max
Square Tube Shear 1/2" to 1", 14 ga. Max
Picket Tool 1/2", 3/4" & 1"
Strokes/minute in light material 1/4" Stroke 40 spm
Strokes/minute in heavy material 3/4" Stroke 17 spm
Hydraulics 1350 psi
Motors Standard 3 hp 3 ph
230/3 motor
Dimensions W - 26"
L - 50"
H - 53" W
Weight 1,117 lbs 532 kg
|
|
Ad # 12664 | Ironworkers |
1981 |
scotchman |
4014-TM |
Good |
sold |
Photo /
More Info. |
40 ton w/ 6 station punch turret: Scotchman Ironworker
Model 4014-TM
40 ton w/ 6 station punch turret
5 HP
220/1 single Phase-home shop ready!!!!
Specifications:
Punch tonnage 40 ton
Punch capacity 1" through 1/2"
Flat bar shearing length 14"
Flag bar shearing capacity 5/8" x 5" to 3/16" x 14"
Angle shear capacity 3" x 3" x 1/4"
Channel 2" max.
Round bar 3/4"
Square bar 3/4"
Hydraulic system pressure 1450
Approximate dimensions 4' x 2' x 5' high
Approximate weight 2,000 lbs.
Included acc: brake & angle shear ,plus lots of punches & flat bar shear adj. stop rod |
|
Ad # 7438 | Ironworkers |
1996 |
Scotchman |
4014C |
Good |
Sold |
Photo /
More Info. |
40 Ton Scotchman 4014C Ironworker : GENERAL SPECIFICATIONS
Punching Capacity: 40 Ton
Punching Capacity: 1" in 1/2"
Throat Depth: 6"
Flat Bar Shear Length: 14"
Bar Shear Capacity: 5/8" x 5"
Strokes Per Minute, Light Material: 40
Strokes Per Minute, Max. Capacity: 12
EQUIPPED WITH
3 HP Motor
Adjustable Stroke Controls |
|
Ad # 12260 | Ironworkers |
93 |
Scotchman |
4014C |
Good |
sold |
Photo /
More Info. |
40 Ton 220 Single Phase: Scotchman 4014C
Voltage 220/ Single Phase
Specifications:• Capacity (tonnage) 40
• Throat 6"
• Shears:
Angle 3" x 3" x 1/4"
Miter (45°) 2" x 2" x 1/4"
• Punching capacities:
3/4 Mild steel 5/8"
1/2" Mild steel 1"
3/8" Mild steel 1-1/4"
• Flat bar shear:
1/2" Mild steel 8"
3/8" Mild Steel 10"
1/4" Mild Steel 12"
3/16" Mild steel 14"
• Hydraulic pressure (PSI) 1,400
• Dimensions:
Left to right 57"
Front to back 52"
Height 58"
• Weight 2,050 Lbs
|
|
Ad # 12999 | Ironworkers |
1997 |
Scotchman |
4014C |
Excellent |
sold |
Photo /
More Info. |
: 1997 Scotchman Ironworker # 4014C
Specifications:• Capacity (tonnage) 40
• Throat 6"
• Shears:
Angle @ 90 deg 3" x 3" x 5/16"
Miter (45°) 2" x 2" x 1/4"
40 strokes per min max
• Hole Punching capacities:
3/4 Mild steel 5/8"
1/2" Mild steel 1"
3/8" Mild steel 1-1/4"
• Flat bar shear:
1/2" Mild steel 8"
3/8" Mild Steel 10"
1/4" Mild Steel 12"
3/16" Mild steel 14"
14" max flat bar shear
includes 12" brake, angle iron shear..as shown
deluxe punch kit-lots of them approx 25-all new punches
machine like new never used |
|
Ad # 9174 | Ironworkers |
76 |
Scotchman |
4014CM |
Good |
Sold |
Photo /
More Info. |
40 Ton Ironworker: Scotchman Ironworker 4014 CM
40 ton punch
includes angle iron shear acc
Punch capacity : 1 inch thru 1/2 in mtl
bar shear: 1/2" x 6 plate or 3/16 x 14 max, 5/8 x 5, 3/8 x 8..14 in max cut length
Angle Shear:3 x 3 x 5/16
230/3 Volts;
4014 CM Machine Capacities spec. based on mild steel at 65,000 psi tensile strength |
|
Ad # 10486 | Ironworkers |
unknown |
Scotchman |
4014CM |
Good |
SOLD |
Photo /
More Info. |
40 ton: 40 Ton Punch Station (1" in 1/2")
Keyed Punch Ram for Safety
6" Throat Depth
2" Die Holder
Punch Nut with Wrench and Stripper
One Round Punch & Die: Max. Dia. 1"
Adjustable Stroke Control
Angle Shear Capacity:
3" x 3" x 5/16" at 90° and 2" x 2" x 1/4" at 45°
14" Flat Bar Shear with 4-Way Reversible Blade (1/2" x 6", 3/16" x 14")
Tool Table Work Area
Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations
230/3 voltage)
All Guards Necessary to Comply with ANSI B 11-5 Standards
Fork Lift Accommodations
One-year warranty
Made in USA
|
|
Ad # 10529 | Ironworkers |
1992 |
Scotchman |
4014CM |
Very Good |
sold |
Photo /
More Info. |
40 Tons: Scotchman 4014-CM
40 Ton punch station with 6" throat
14" bar shear blades
12" brake acc.
3" angle shear (please see pictures)
Hardly Used
1Phase 230 volt meter
Have aprox. 22 punchs and dies (please see pictures)
Adjustable Stroke Control
Machine is mounted on very nice welded frame with 4 solid steel casters, also.
Has aprox. 30' of electrical cord attached. |
|
Ad # 10647 | Ironworkers |
|
Ironcraft |
41/41 |
Good |
SOLD |
Photo /
More Info. |
3" x 3" x 5/16",Ironcrafter,40 Ton,Hyd,Punch,Flats,Sq&Rds,Infd&StockSt: One Each Used - Ironcrafter 40 Ton Hydraulic
Ironworker, Model 41/41, Serial Number 79E193
Specifications:
Punching: 40 Tons, 1" Dia x 1/2" Thick Max (Relational)
Maximum Dia 1-1/4"
Stroke: 2"
Shearing Angles: 3" x 3" x 5/16" at 90 Degrees
2" x 5/16" at 45 Degrees
Round Bar: 1-1/4" and Square Bar at 1"
Flats: 6" x 5/8"
Electrics: Presently on 220/3/60 Htz
Equipped With:
Many Sets Of Assorted Punches & Dies, P40 P & P82 D
Lifting Eyebolt
144" Adjustable Stock Stop
118" Infeed Table With Gravity Roller Holdowns
Condition: Good Operating and Quiet
|
|
Ad # 12660 | Ironworkers |
|
Uni-Hydro |
4406 Angle Shear |
Excellent |
sold |
Photo /
More Info. |
3" x 3" x 3/8": Uni-Hydro 3" x 3" x 3/8' Slug Type Angle Shear.
Fits Uni-Hydro 40-56 ton units. Very little useage in excellent condition. |
|
Ad # 8351 | Ironworkers |
|
Buffalo |
50 ton |
Good |
Sold |
Photo /
More Info. |
50 Ton Buffalo Ironworker: USED 50 Ton BUFFALO IRONWORKER
Punch-Tonnage:50 Tons
Hole Capacity:1-1/16" - 5/8" Mild Steel
Throat Depth:20"
Work Height:38
Shear-Angles(90dg):4" x 4" x 1/2"
Angles(45dg):3" x 3" x 5/16"
Shear-Plates:1/2"
Flats:6" x 5/8"
Length of Knives:10"
Bar Cutter-Rounds:1-5/8"
Square:1-1/2"
Coper:3" x 3" x 3/8"
Notcher:3" x 3" x 5/16"
SPM Approx.:30
EQUIPPED WITH:
Foot Pedals For Operation
Bijur One Shot Oil Lubrication
Pushbuttons For Start - Stop
Punch & Die Holder
3 HP 1750 RPM 230/460/3/60 Motor
|
|
Ad # 7798 | Ironworkers |
1995 |
Edwards |
50 Ton Jaws IV |
Good |
SOLD |
Photo /
More Info. |
50 Ton Hydraulic Ironworker Edwards Model Jaws IV: Specifications:
Punch Capacity - 1" hole in 5/8" Plate
Shear Capacity - 10" x 1/2"
Round Capacity - 1"
Square Capacity - 1"
Angle - 3" x 3" x 3/8"
Coper - 2" x 3" x 5/16"
3 HP Main Motor |
|
Ad # 13897 | Ironworkers |
2003 |
scotchman |
5014 TM |
Good |
sold |
Photo /
More Info. |
50 Ton: Scotchman
Model 5014 TM
Wired 460
50 Ton Punch Station with 3-Station Revolving Turret (1-1/4" in 1/2" and 13/16" in 3/4")
Keyed Punch Ram for Safety
4" Throat Depth
Three 2" Die Holders, Three Punch Nuts with Wrench and Three Strippers
Adjustable Stroke Control
Angle Shear 4" x 4" x 3/8" at 90° and 2" x 2" x 3/8" at 45°
14" Flat Bar Shear with 4-Way Reversible Blade (3/4" x 4", 1/2" x 8", 3/8" x 10", 1/4" x 14")
Rectangular Notcher, 2-1/2" x 3" x 5/16" , 2-1/2" x 2-3/4" x 3/8"
Tool Table Work Area
Punching Capacity 50 ton
1-1/4" in 1/2"
13/16" in 3/4"
Special Tooling 2-1/4" Max. Dia.
Throat Depth 4" 100 mm
Flat Bar Shear 14" Length
3/4" x 4"
1/2" x 8"
3/8" x 10"
1/4" x 14"
Angle Shear 90° 4" x 4" x 3/8"
Strokes Per Minute in Light Material [Punch Station] 1/4" stroke
Strokes Per Minute in Heavy Material [Punch Station] 3/4" stroke
Hydraulics 2100 psi
All Guards Necessary to Comply with ANSI B 11-5 Standards
Forklift Accommodations
Made in USA
Optional Tooling not included with this machine! But available New if required.
90° V. Notcher 6" x 6" x 1/8"
3" x 3" x 1/4"
Rod Shear
Round Rod (Max.)
Square Rod (Max.) 1/4" to 1"
5 Cavity
7/16", 9/16"
5/8", 3/4", 1"
1/4" to 3/4" 1 Cavity 3/4"
Square Tube Shear 1/2" to 1" 12 ga.
Picket Tool 1/2" 3/4" 1" 16 gauge |
|
Ad # 14693 | Ironworkers |
2003 |
Scotchman |
5014 TM |
Good |
sold |
Photo /
More Info. |
50 Ton: 2003 50 Ton Scotchman comes with about 20 dies.
Clean machine and is maintained and operated on a daily basis.
Standard Specs - please verify:
Scotchman
Model 5014 TM
Wired 460
50 Ton Punch Station with 3-Station
Revolving
Turret (1-1/4" in 1/2" and 13/16" in 3/4")
Keyed Punch Ram for Safety
4" Throat Depth
Three 2" Die Holders, Three Punch Nuts with
Wrench and Three Strippers
Adjustable Stroke Control
Angle Shear 4" x 4" x 3/8" at 90° and 2" x
2"
x 3/8" at 45°
14" Flat Bar Shear with 4-Way Reversible
Blade
(3/4" x 4", 1/2" x 8", 3/8" x 10", 1/4" x 14")
Rectangular Notcher, 2-1/2" x 3" x 5/16" ,
2-
1/2" x 2-3/4" x 3/8"
Tool Table Work Area
Punching Capacity 50 ton
1-1/4" in 1/2"
13/16" in 3/4"
Special Tooling 2-1/4" Max. Dia.
Throat Depth 4" 100 mm
Flat Bar Shear 14" Length
3/4" x 4"
1/2" x 8"
3/8" x 10"
1/4" x 14"
Angle Shear 90° 4" x 4" x 3/8"
Strokes Per Minute in Light Material [Punch
Station] 1/4" stroke
Strokes Per Minute in Heavy Material [Punch
Station] 3/4" stroke
Hydraulics 2100 psi
All Guards Necessary to Comply with ANSI B
11-
5 Standards
Forklift Accommodations
Made in USA
Optional Tooling not included with this
machine! But available New if required.
90° V. Notcher 6" x 6" x 1/8"
3" x 3" x 1/4"
Rod Shear
Round Rod (Max.)
Square Rod (Max.) 1/4" to 1"
5 Cavity
7/16", 9/16"
5/8", 3/4", 1"
1/4" to 3/4" 1 Cavity 3/4"
Square Tube Shear 1/2" to 1" 12 ga.
Picket Tool 1/2" 3/4" 1" 16 gauge |
|
Ad # 12002 | Ironworkers |
2007 |
scotchman |
5014TM |
Excellent |
sold |
Photo /
More Info. |
50 ton: scotchman 5014TM Ironworker
12" brake acc
lots of punches-shown
* 50 Ton Punch Station With 3 Station Revolving Turret (1-1/4" in 1/2")
* 14" Flat Bar Shear With 4-Way Reversible Blade (3/4" x 4", 1/4" x 14")
* Electrical Box With Emergency Palm Button & Lock-out Tag-out
* Rectangle Notcher 2-1/2" x 2-3/4" x 3/8" or 2-1/2" x 3" x 5/16"
* Keyed Punch Ram
* Tool Table Work Area
* 4" Throat Depth
* 2" Die Holder
* All Guards Comply With ANSI B 11-5 Standards
* Punch Nuts With Wrench & Strippers* Forklift Accommodations
* Adjustable Stroke Control* Made in the USA
|
|
Ad # 13891 | Ironworkers |
1980 |
Scotchman |
5075 |
Good |
sold |
Photo /
More Info. |
50 Ton: Scotchman Iron Worker
Model 5075
24" Shear Blade
hole punch: 1" thru 1/2" mtl steelw/7.5" depth on the punch throat
Angle Shear: 6" x 6" x 3/8"
Rod Shear:optional
bar shear: 24" max length
Many misc Punches included
main motor:5 HP motor
Shear Blades have been resharpened |
|
Ad # 11613 | Ironworkers |
1980 |
Scotchman |
5075 |
Good |
sold |
Photo /
More Info. |
50 ton: Scotchman 50 Ton Iron worker
4" angle shear
24" plate shear
Runs Fine.
Comes with some tooling.
|
|
Ad # 8350 | Ironworkers |
1981 |
Scotchman |
5075 |
Good |
sold |
Photo /
More Info. |
50 Ton Scotchman Hydraulic Ironworker: USED 50 Ton SCOTCHMAN HYDRAULIC IRONWORKER
Punch-Tonnage:50 Tons
Hole Capacity:1-1/8"-1/2" Mild Steel
3/4" - 3/4" Mild Steel
Throat Depth:7-1/2"
SPM Approx:30
Shear-Angles:4" x 4" x 3/8" Mild Steel
Flat Bar:24" x 3/16" Mild Steel
8" x 1/2" Mild Steel
6" x 3/4" Mild Steel
Length Of Knives:25"
Notcher:6" x 6" x 5/8" Mild Steel
Equipped With:
Foot Switches For Punch And
Shear Section
Toggle Switch For On-Off
Notcher Attachment
Hand Lever For Shear Or Punch
Section
Pressure Gauge
Portable-On Wheels
Hydraulic Pump Driven By
5 HP 1740 RPM 230/460/3/60 Motor
|
|
Ad # 9283 | Ironworkers |
2005 |
Kingsland |
60P625-24" throat |
New |
SOLD |
Photo /
More Info. |
50 US tons: New Kingsland Hydraulic Ironworker. Modele #60P625-24" throat
comes with new automatic positioning unit x 20ft
Modele # KA-11D-20ft
Factory Specs below-verify
MULTI 60 Ton Punching
Max. Punching Capacity
1-1/4"" hole in 1/2" steel 1" hole in 3/4" steel
Stroke Length
2-1/8"
Standard throat (D option)
12" or (25")
Largest Hole (optional)
2-1/4" (6-3/8")
Cycles/min. - 3/4" travel
34
Working Height
40-1/2"
Shearing
Flat bar, max. thickness
9" x 3/4"
Flat bar, max. width
14-3/8' x 3/8"
Angle flange trim/max 45 deg
4" x 5/8"
Angle Cutting
90 deg. cutting
5-3/16" x 1/2"
45 deg. mitre cutting
2-3/4" x 3/8"
working height
44-1/2"
Section Cutting
round/square
1-3/4"
Channel/beam (option)
5-3/16" x 2-1/2"
T-profile (option)
3-1/2" x 1/2" 3
Notching
Material thickness
3/8"
width - rectangle
1-3/4"
depth - rectangle
3-1/2"
depth - vee
2-3/8"
angle flange - max. profile
4" x 3/8"
working height
35"
Specifications
Motor
7.5 HP
Nett. Weight
3,462 lbs
Machine Dims. (LxWxH)
65" x 28" x 70"
|
|
Ad # 13883 | Ironworkers |
1989 |
Uni-hydro |
65 -14 |
Good |
sold |
Photo /
More Info. |
65 ton: Uni-hydro 65 ton ironworker model#65-14
punch station, shear station, angle iron
lots of misc size/shape punches included approx :30pc
4" x 4" x 1/2" angle shear capacity
flat bar shear: 1" x 6" or 3/4" x 8" or 1/2" x 12"
mtl stop on angle iron station
36"squaring arm on shear
12" flat bar shear max length
lots of punches & dies includded in bucket shown |
|
Ad # 9811 | Ironworkers |
2007 |
Edwards |
65 Tion |
Fair |
sold |
Photo /
More Info. |
: 2007 Edwards Ironworker, 65 Ton, S/N 3886507, 3Ph, 440V, 60Hz, 9-3/4" Throa... |
|
Ad # 11538 | Ironworkers |
2005 |
edwards |
65 ton edwards ironwoker |
Excellent |
sold |
Photo /
More Info. |
65 ton edwards: 65 ton PUNCH US--- Metric
Tooling included: 6 x 6 angle shear
Max. Capacity 1-1/16" dia. in 3/4" plate 2.85cm x 1.90cm
Work Height 36" 91.44cm
FLAT BAR SHEAR
Max. Width 3/8" x 24" 0.95cm x 60.96cm
Max. Thick 1/2" x 14" or 1" x 4" 1.27cm x 35.56cm x 2.54cm x 10.16cm
Max. Round 1" 2.54cm
Max. Square 1" 2.54cm
Work Height 33-1/2" 85.09cm
ANGLE SHEAR
Max. Size 5" x 5" x 1/4" or 4" x 4" x 3/8" 12.7cm x 12.7cm x 0.63cm or 10.16cm x 10.16cm x 0.95cm
Work Height 42" 106.68cm
COPER / NOTCHER
Max. Capacity 2-1/2" x 6" x 3/8" 6.35cm x 15.24cm x 0.95cm
Work Height 35-1/2" 90.17cm
OPEN CAVITY
Specifications 11-1/2" wide x 9-3/4" tall 29.21cm x 24.765cm
Work Height 42" 106.68cm
GENERAL SPECS
Rated Capacity 65 ton
Throat Depth 9-3/4" 24.76cm
Open Height 8-1/8" 20.63cm
Shut Height 6-3/4" 17.14cm
Stroke 1-3/8" 3.49cm
Cycle Time 2 seconds
Electric Motor Standard 5 HP, 3 Phase, 208/240 v, 1725 rpm, 14 amp
Hydraulic Pump Size 10-1/2 gpm - 2 stage 39.74L per min - 2 stage
Valve Pressure 2800 psi 193.05bar
Reservoir 17 gallons 64.35L
Cylinder 3-1/2" ram 8.89cm
Dimensions: Base x Height 43" x 42" x 55" 109.22cm x 106.68cm x 139.7cm
Shipping Weight 4220 pounds 1914.15kg
Picture shown not actual machine but identical
Have angle Iron shear acc: 6 x 6 x 1/4" , no punches
very low hrs..
bought 2005 used maybe 10xs come get this tied of moving it around used on race car fab. |
|
Ad # 12259 | Ironworkers |
94 |
Scotchman |
6509 |
Good |
sold |
Photo /
More Info. |
65 Ton: Rated on: 65,000 PSI Tensile A 36 Mild Steel
Punching Capacity 65 ton
1-1/16" in 3/4" 58 mt
27 mm in 18 mm
Special Tooling 4" Max. Dia. 100 mm Max. Dia.
Flat Bar Shear 24" Length
1" x 6"
3/4" x 10"
1/2" x 12"
3/8" x 16"
1/4" x 24" 600 mm
25 mm x 150 mm
18 mm x 250 mm
12 mm x 300 mm
10 mm x 400 mm
6 mm x 600 mm
Opt. Saber Blade 1" x 6"
1/2" x 16" 25 mm x 150 mm
12 mm x 400 mm
Angle Shear 90° 6" x 6" x 3/8"
5" x 5" x 1/2" 150 mm x 150 mm x 10 mm
125 mm x 125 mm x 12 mm
Angle Shear 45°
(with Bar Shear) 3" x 3" x 3/8"
4" x 4" x 1/2" 75 mm x 75 mm x 10 mm
100 mm x 100 mm x 12 mm
Brake 12" 40 ton 36 mt
Brake 24" 30 ton 27 mt
Open End Brake Max. 1/4" x 5"
Flat or Angle Iron 6 mm x 125 mm
Pipe Notcher
Schedule 40 I.D. 3/4"
1"
1-1/4"
1-1/2"
2" 19 mm
25 mm
32 mm
38 mm
50 mm
Rectangle Notcher 2" x 2-1/2" x 3/8" 50 mm x 65 mm x 10 mm
90° V. Notcher 6" x 6" x 5/16" 150 mm x 150 mm x 8 mm
Channel Shear 2" to 5" Adj. 50 mm to 125 mm Adj.
Strut Shear Samples Required
Rod Shear
Round Rod (Max.)
Square Rod (Max.) 1/4" to 1-1/4", 9 Cav.
1/4" to 1", 1 Cav. 6 mm to 32 mm
6 mm to 25 mm
Square Tube Shear 1/2" to 2",
12 ga. 12 mm to 50 mm
2.75 mm
Picket Tool 1/2"
3/4"
1"
16 gauge 12 mm
19 mm
25 mm
1.6 mm
Offset Die Holder Max. 40 ton 36 mt
Strokes Per Minute in Light Material 1/4" Stroke [Punch Station] 40 spm
Strokes Per Minute in Heavy Material 3/4" Stroke [Punch Station] 17 spm
Hydraulics 2,600 psi 183 bar
Dimensions W-24"
L-60"
H-66" W-57 cm
L-152 cm
H-168 cm
Weight 2,750 lbs. 1,250 kg
|
|
Ad # 11124 | Ironworkers |
|
Scotchman |
6509 |
Good |
sold |
Photo /
More Info. |
65 ton: 65 ton
Includes set of punches & angle shear |
|
Ad # 14654 | Ironworkers |
|
Scotchman |
6509 |
Good |
sold |
Photo /
More Info. |
65 Ton: 65 TON SCOTCHMAN HYDRAULIC IRONWORKER
Model 6509
Punch Tonnage: 65 Tons
Hole Capacity: 1-1/16" in 3/4" Mild Steel
Throat Depth: 9"
SPM Approx.: 40
Angle Shear:
(90°): 6" x 6" x 3/8" Mild Steel
(45°): 4" x 4" x 1/2" Mild Steel
Flat Bar Shear:
24" x 1/4" Mild Steel
12" x 1/2" Mild Steel
8" x 3/4" Mild Steel
Length of Knives: 24"
EQUIPPED WITH:
Remote Foot Switch
Angle Shear
Miscellaneous Punches & Dies |
|
Ad # 7796 | Ironworkers |
1980 |
Scotchman |
6509 |
Good |
Sold |
Photo /
More Info. |
65 Ton Hydraulic Ironworker Scotchman Model 6509: Specifications:
65 Ton Punch Station (1-16" Dia x 3/4" Thick) reference
9" Throat
Shear Capacity:1" X 6",3/4" X 10",3/8" X 16",1/4" X 24"
Electrics: 5HP Hyd Motor
Equipped With:
24" Flat Bar Shear With 4-Way Reversible Blade
Optional Accessories:
Angle Shear Capacity At 90 Degree: 6" x 6" x 3/8"
Rod Shear: Round 1/4" to 1-1/4", 9 Cavities
Square 1/4" to 1", 1 Cavity
24" Brake Attachment, 2" Opening
Dies & Punches |
|
Ad # 9206 | Ironworkers |
1996 |
scotchman |
6509 |
Very Good |
Sold |
Photo /
More Info. |
65 ton: Standard Features
65 Ton Punch Station (1-1/16" in 3/4")
Keyed Punch Ram for Safety
9" Throat Depth
Punch Gauging Table w/Fence and Scale
Die Holder Complete with 2" Die Insert
Punch Nut with Wrench and Stripper
One Round Punch & Die: Max. Dia. 1-1/4"
Punch Jog Control
Adjustable Electric Stroke Control with Scale
Electric Remote Foot Pedal
24" Flat Bar Shear with 4-Way Reversible
Blade (1" x 6", 1/4" x 24")
Angle Shear Capacity at 90°
6" x 6" x 3/8" and 5" x 5" x 1/2"
Tool Table Work Area
Two-Stage Hydraulic Pump
Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations
230/460 volt /3 Phase Electrics (must specify voltage)
All Guards Necessary to Comply with
ANSI B 11-5 Standards
Forklift Accommodations
One-year warranty
Made in USA
Capacities & Specifications
Rated on: 65,000 PSI Tensile A 36 Mild Steel
Punching Capacity 65 ton
1-1/16" in 3/4" 58 mt
27 mm in 18 mm
Special Tooling 4" Max. Dia. 100 mm Max. Dia.
Throat Depth 9" 225 mm
Flat Bar Shear 24" Length
1" x 6"
3/4" x 10"
1/2" x 12"
3/8" x 16"
1/4" x 24" 600 mm
25 mm x 150 mm
18 mm x 250 mm
12 mm x 300 mm
10 mm x 400 mm
6 mm x 600 mm
Opt. Saber Blade 1" x 6"
1/2" x 16" 25 mm x 150 mm
12 mm x 400 mm
Angle Shear 90°
6" x 6" x 3/8"
5" x 5" x 1/2" 150 mm x 150 mm x 10 mm
125 mm x 125 mm x 12 mm
Angle Shear 45°
(with Bar Shear) 3" x 3" x 3/8"
4" x 4" x 1/2" 75 mm x 75 mm x 10 mm
100 mm x 100 mm x 12 mm
Brake 12" 40 ton 36 mt
Brake 24" 30 ton 27 mt
Open End Brake Max. 1/4" x 6" Flat or Angle Iron 6 mm x 150 mm
Pipe Notcher
Schedule 40 I.D. 3/4"
1"
1-1/4"
1-1/2"
2" 19 mm
25 mm
32 mm
38 mm
50 mm
Rectangle Notcher 2" x 2-1/2" x 3/8" 50 mm x 65 mm x 10 mm
90° V. Notcher 6" x 6" x 5/16" 150 mm x 150 mm x 8 mm
Channel Shear 2" to 5" Adj. 50 mm to 125 mm Adj.
Rod Shear
Round Rod
Square Rod
1/4" to 1-1/4", 9 Cav.
1/4" to 1", 1 Cav.
6 mm to 32 mm
6 mm to 25 mm
SquareTube Shear 1/2" to 2",
12 ga. 12 mm to 50 mm
2.75 mm
Picket Tool 1/2"
3/4"
1"
16 gauge 12 mm
19 mm
25 mm
1.6 mm
Offset Die Holder Max. 40 ton 36 mt
Strokes Per Minute in Light Material 1/4" Stroke [Punch Station] 40 spm
Strokes Per Minute in Heavy Material 3/4" Stroke [Punch Station] 17 spm
Hydraulics 2,600 psi 183 bar
Motors Standard 5 hp
3 ph 230 voltage
Dimensions W-24"
L-60"
H-66" W-57 cm
L-152 cm
H-168 cm
includes below options with machine
24"brake, notcher, angle iron shear, various punches and dies. |
|
Ad # 13104 | Ironworkers |
2003 |
Scotchman |
6509-24M |
Good |
sold |
Photo /
More Info. |
65 Ton: Scotchman Iron Worker
Model 6509-24M
65 Ton
220/1 Single Phase Machine
9" Throat Depth
24" Flat Bar Shear with 4-Way Reversible Blade (1" x 6", 1/4" x 24")
Angle Shear Capacity at 90° 6" x 6" x 3/8" and 5" x 5" x 1/2"
Many Punches included. Tubing Notcher only other tooling. |
|
Ad # 7929 | Ironworkers |
1986 |
Scotchman |
6509-24M |
Very Good |
Sold |
Photo /
More Info. |
65 Ton Scotchman Ironworker: Included Acc: rod shear, 24" brake , 6 x 6 x 3/8" angle shear , lots & lots... |
|
Ad # 12142 | Ironworkers |
2000 |
unihydro |
66 ton |
Good |
sold |
Photo /
More Info. |
66 ton: 66 ton
comes with all tooling punches,channel shear,notcher,hand rail notcher,24"brake |
|
Ad # 8347 | Ironworkers |
|
Peddinghaus |
66/110H |
Good |
Sold |
Photo /
More Info. |
66 Tons Peddinghaus Hydraulic Ironworker: USED 66 TON PEDDINGHAUS Hydraulic IRONWORKER
Punch-Tonnage:66 Tons
Hole Capacity:1-1/16" Through 21/32"
Stroke:9/16" - 1-3/16"
Throat Depth:20"
SPM Approx.:30
Shear-Angles:5" x 5" x 1/2"
3-1/2" x 3-1/2" x 3/8"
Flats:20" x 7/16"
16" x 5/8"
6" x 3/4"
4" x 7/8"
Length Of Knives:20"
Notcher-Plates:1/2"
Angles&Tees:3-1/2" x 3/8"
Bar Cutter-Rounds:1-3/4"
Squares:1-5/8"
EQUIPPED WITH:Electric
Foot Switch
Pushbuttons For Start - Stop
Selector Switch For Raise-Off-Lower
Emergency Stop Button
Punch & Die Holder
Pressure Gauge
Hydraulic Pump Driven By
10 HP Motor
|
|
Ad # 5832 | Ironworkers |
1993 |
Geka |
70-S |
Good |
SOLD |
Photo /
More Info. |
77 Ton Geka Hydraulic Ironworker: Capacity 77 Tons
Shear Capacities:
Maximum Flats: 18"x 5/8", 12"x 3/4" or 10"x 1"
Maximum Angles: 5"x 5"x 1/2"
Rod: 1-3/4"
Throat Depth 12"
Stroke Speed 48 SPM (at 3/4" Travel)
Motor 12 H.P., 230/460V 3 Ph
Equipped With:
Built-in Notcher, Punch, Angle, Bar & Plate Shear
Automatic Cut Gauge Bar
Punch Table w/ Back Stop
(2) Electric Foot Pedals, for Simultaneous, Independant Operation
(46) Punch Sets w/ Rack
Worklight |
|
Ad # 8345 | Ironworkers |
1980 |
SCOTCHMAN |
7012-24 |
Good |
sold |
Photo /
More Info. |
70 Ton Scotchman 7012-24 Hydraulic Ironworker With Brake Attachment: USED 70 TON SCOTCHMAN HYDRAULIC IRONWORKER With Brake Attachment
Punch-Tonnage:70 Tons
Hole Capacity:1-1/16" Through 3/4" Mild Steel
1-1/4" Through 5/8" Mild Steel
Throat Depth:12"
SPM Approx.:37
Shear-Angles:6" x 6" x 1/2"
Shear-Plate:24" x 1/4" Mild Steel
8" x 3/4" Mild Steel
6" x 1" Mild Steel
Length Of Knives:24"
EQUIPPED WITH:
Joystick For Punch Section &
Shear Section
24" Long Brake Attachment
Angle Shear Attachment
Assortment of Punches & Dies
Pushbuttons For Start - Stop
Hydraulic Pump Driven By
7-1/2 HP 1740 RPM 220/440/3/60 Motor |
|
Ad # 9126 | Ironworkers |
1997 |
HMI |
7810-25///C25-#8010-25 |
Excellent |
Sold |
Photo /
More Info. |
80 Ton -dual operator: 80 Ton'
10 inch throat x 14 high
Punches 15/16 thru 15 /16 max dia 6" with special tooling,
std round punching cap 1-3/8 hole x 1-1/4" square hole
Notching 3" x 3" x 3/8"
Punching:8 max stroke
flat bar shear: 25In max
1/8" x 24", 3/8" x 15" , 1/2" x 12 in, 3/4" x 8 in
Angle shear: 4 x 4 x 3/8 W/15 " mtl stop option
10 HP motor
Lots of Tooling-Shown...
|
|
Ad # 11607 | Ironworkers |
2003 |
Scotchman |
8507-14M |
Very Good |
sold |
Photo /
More Info. |
85 Ton Fully intergrated: Fully Intergrated FI 85/140
85 Ton Punch
140 plate shear tonnage
Punch 1-1/16" Hole 1" Thick
Shear 1" x 12" Plate
6" x 6" 1/2" Angle
1 3/8" Round Bar Shear
1-1/4 Square Bar
6" Throat
Notching 3"
no round stock blade in machine
has new blades in other location |
|
Ad # 12141 | Ironworkers |
2004 |
unihydro |
90 ton |
Good |
sold |
Photo /
More Info. |
90 ton: 90 ton ironworker
good machine ready to work |
|
Ad # 8342 | Ironworkers |
1990 |
SCOTCHMAN |
9012-24M |
Good |
sold |
Photo /
More Info. |
90 Ton SCOTCHMAN 9012-24M HYDRALIC IRONWORKER: USED 90 Ton SCOTCHMAN HYDRAULIC IRONWORKER
With Press Brake Attachment
Capacities:
Punch-Tonnage:90 Tons
Hole Capacity:1-1/16" - 1" Thick-Mild Steel
Throat Depth:12"
S.P.M. Approx.:37
Shear-Angles (90dg):6" x 6" x 1/2" - Mild Steel
(45dg):4" x 4" x 1/2" - Mild Steel
Flat Bar:24" x 1/4" - Mild Steel
16" x 1/2" - Mild Steel
10" x 3/4" - Mild Steel
8" x 1" - Mild Steel
Length of Knives:24"
Bar Cutter -Rounds:1-1/4" Round - Mild Steel
Square:1" - Mild Steel
Notcher (90dg):6" x 6" x 5/16" Mild Steel
Rectangle Notcher:2" x 2-1/2" x 3/8" Mild Steel
EQUIPPED WITH:
Electric Foot Switch
Pushbuttons For Start - Stop
Selector Switch For Punch - Shear
Attachment of Rod Shear - Angle Shear -
Brakes-Notcher & Offset Die Holder
Assortment of Punches & Dies
Punch & Die Holder
Hydraulic Pump Driven by
5 HP 1800 RPM 230/460/3/60 Motor
|
|
Ad # 13870 | Ironworkers |
1975 ? |
Mubea |
BF 10 |
Fair |
sold |
Photo /
More Info. |
21 Ton-mechanical type: Mubea Ironworker
Model: BF 10
Capacity: 21 Ton
mechanical ironworker
Electrical: 230/ 3 phase
Round Holes...1 1/4" in 3/16" & 9/16" in 7/16"
Number of Strokes Per Minute...72,
Depth of the Throat...2"
Plate Shear...6"x 5/16",
Angles...3x3x5/16"@
90A degree 2x2x4 1/4"@ 45A degree,
Round Bar & Square Bar...1 3/32",
Channel...2 3/4"x 1/2"x 6"@ 90A degree
Some tooling included |
|
Ad # 8346 | Ironworkers |
|
Proma Omes |
CH-70 |
Good |
Sold |
Photo /
More Info. |
70 Ton Hydraulic Ironworker: USED 70 TON PROMA-OMES IRONWORKER
Hydraulic
Punch-Tonnage:70 Tons
Hole Capacity:1-1/8" Through 3/4" Mild Steel
Throat Depth:12"
Section Shear-Angles(90dg):5" x 5" x 1/2"
Angles(45dg):3" x 3" x 3/8"
Flats Iron:18" x 5/8"
12" x 3/4"
Length Of Knives: 18"
Bar Cutter-Rounds:1-3/4"
Squares:1-3/4"
Notcher:15/32"
EQUIPPED WITH:
Electric Foot Switch
Selector Switches For Run - Jog -
Full PSI & Low PSI
Pushbuttons For Hydraulic On - Off
Emergency Stop Button
Punch & Die Holder
Hydraulic Pump Driven By
5 HP 1800 RPM 220/440/3/60 Motor
|
|
Ad # 8181 | Ironworkers |
2004 |
Scotchman |
DO 70 |
Excellent |
Sold |
Photo /
More Info. |
Scotchman dual operator 70/110 Ton Ironworker: 70 Ton Punch Capacity
110 Ton Shear Capacity 24"x3/8"
Includes angle iron shear...option
new flat bar shear blades
Upgraded to large size
Dual operator
Standard Features
Dual Operator allows for Two Operators to Work at the Same Time at Full Capacity
70 Ton Punch Station (1-1/8" in 3/4")
Keyed Punch Ram for Safety
9" Throat Depth
Punch Gauging Table with Fence and Scale
Die Holder Complete with 2" Die Insert
Punch Nut with Wrench
Adjustable Swing-Away Stripper
One Round Punch & Die: Max. Dia. 1-1/4"
Punch Jog Control
Two Adjustable Electric Stroke Controls with Scale
Two Electric Remote Foot Pedals
Two 2-Stage Hydraulic Pumps
Two Valves
Angle Shear Capacity 6" x 6" x 1/2"
Rectangle Notcher 3" x 5" x 3/8",
3" x 4" x 1/2'
Notcher Table with Guides
110 Ton, 24" Bar Shear with
Sabre Blade (1" x 6", 3/8" x 24")
Shear Table with Miter Fence
Tool Table Work Area
Slug Receptacles
Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations
230/460 Volt/3 Phase Electrics (must specify voltage)
All Guards Necessary to Comply with
ANSI B 11-5 Standards
Forklift Accommodations
One Year Warranty
Made in USA
factory Options available--not included below
Capacities & Specifications
Punching Capacity 70 ton
1-1/8" IN 3/4" 63 mt
28 IN 20
Special Tooling 4" Max. Dia. 100 thru 5.5
Throat Depth 9" 225 mm
Flat Bar Shear (Sabre Blade - Std) 110 ton
24" Length
1" x 6"
3/4" x 10"
1/2" x 14"
3/8" x 24" 100 mt
600
25 x 150
18 x 250
12 x 350
10 x 600
Angle Shear 90° 6" x 6" x 1/2" 150 x 150 x 12
Angle Shear 45° 3" x 3" x 3/8" 75 x 75 x 10
Angle Shear 45° (with Bar Shear) 4" x 4" x 1/2" 100 x 100 x 12
Brake 12" 65 ton 59 mt
Brake 24" 45 ton 40 mt
Open End Brake Max. 1/4" x 6" Flat or Angle Iron 6 x 150
Pipe Notcher Schedule 40 I.D. 3/4", 1", 1-1/4",
1-1/2", 2" 19, 25, 32, 38, 50
90° V. Notcher 6" x 6" x 5/16" 150 x 150 x 8
NOTCHER
Rectangle
V. Notch
Notching in Leg of
Channel 3" x 5" x 3/8"
3" x 4" x 1/2"
3" x 3" x 3/8"
6" to 10" 75 x 125 x 10
75 x 100 x 12
75 x 75 x 10
150 to 250
Channel Shear 2" to 6" Adj. 50 to 150 Adj.
ROD SHEAR
Round Rod
Square Rod 1/4" to 1-1/4",
9 Cav.
1/4" to 1",
1 Cav. 6 to 32
6 to 25
Square Tube Shear 1/2" to 2",
14 ga. 12 to 50
Picket Tool 1/2", 3/4" & 1" 12, 19, 25
Offset Die Holder Max. 40 ton 36 mt
Strokes Per Minute in Light Material 1/4" Stroke 25 spm
Strokes Per Minute in Heavy Material 3/4" Stroke 17 spm
Hydraulics 2,500 psi 172 bar
Motors Standard 10 hp 3 ph
Dimensions W-30" L-65"
H-72-1/8" W-76 L-165 H-183 cm
Weight 3,790 lbs. 1,720 kg
|
|
Ad # 4189 | Ironworkers |
1990 |
GEKA |
Geka Hydracrop #55A |
Very Good |
Sold |
No Photo /
More Info. |
GEKA 55-TON HYDRAULIC IRONWORKER :
IRONWORKERS
4" x 4" x 1/2" Geka Hydracrop #55A ,55 Ton, 20"thr,work tbl.w/gauge,12" shear
Capacity 55 Tons
Shear Capacities:
Maximum Flats: 5/8" x 12" or 3/4" x 8"
Maximum Angles: 4" x 4" x 1/2" or 4-1/2" x 4-1/2" x 3/8"
Maximum Bar: 1-9/16" Round & Square
Maximum Punch: 1-1/8" x 1/2" or 3/4" x 3/4"
Maximum Notch: 1-5/8" x 3-1/2" x 3/8" Thick
Throat Depth 20"
Stroke Speed 43
Motor 6½ H.P. 230/460 Volt, 3 Phase
Equipped With:
20" Deep Punch End Throat
Work Table on Punch and Coper Ends w/ Adjustable Back Stops
Electric Length Gauge
Electric Foot Pedals
20 plus punches & dies
Worklight |
|
Ad # 11142 | Ironworkers |
2007 |
Clark |
H-66 |
Very Good |
Sold |
Photo /
More Info. |
66 Tons: The CLARK H-66 is a 66-ton industrial grade Iron Worker featuring multiple ... |
|
Ad # 14155 | Ironworkers |
2002 |
Mubea |
HIW 750/510 |
Good |
sold |
Photo /
More Info. |
82 Ton: Mubea Ironworker
Capacity: 82 Ton
Model: HIW 750/510
Electrical: 230/460/3 phase
Punching:
Max. Tonnage.......82 Ton
Punch Capacity.....1-1/4” Hole Thru 3/4” Plate
Max Stroke Length .3-1/8"
Throat.............20"
Bar Shear:
Flat Max. Thickness...12" x 3/4”
Flat Max. Width.......18” x 5/8”
Angle Shear:
Max. Size.............6" x 6" x 1/2"
Coper Notcher:
Max Size..............2-1/16" x 3-1/2" x 7/16"
Round/Square:
Max. Size ............2"
Motor Size............10 HP
(5) Separate Work Stations:
Punching......Standard
Angle.........Standard
Flat Bar......Standard
Notching......Standard
Rod/Square....Standard
|
|