Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9825 | Ironworkers |
|
|
|
|
Sold |
Photo /
More Info. |
WEIDEMANN 12 POSITION TURRET PUNCH : IN EXCELLENT SHAPE |
|
Ad # 10679 | Ironworkers |
2007 |
Bailegh |
SW-441/SW50 |
Excellent |
Sold |
Photo /
More Info. |
50 ton, single phase : Specifications:
50 Ton
3HP
PUNCH CAPACITY:
1/8" x 5/8"; 1-5/8" Dia x 3/8" thick
throat depth : 6"
max stroke: 1-1/8"
cycles: 19 times/min
FLAT SHEARING:
flat bar capacity : 10" x 3/8"
blade length : 10-1/4"
ANGLE SHEARING:
at 90 deg: 3 x 3 x1/4"
BAR ShEARING:
round: 1-1/8"
square: 1 x 1"
NOTCHING:
rectanglular notcher: 2" x 3" x 9/32"
Special Tooling: Available(not included)
press brake: 6-5/16" x 5/16"
Multi-Vee Press brake: 9-1/8" x 5/32"
Pipe notching: 2-1/2"
Vee notching: 3-1/2" x 3-1/2" x 5/16"
Angle bending: 2-1/2" x 5/15"
•True vertical movement on all stations - less deformation and cleaner cuts - no waste!
•Oversize, 2 piece quick release punching table with adjustable stops and sae / metric scale - Standard!
•Oversize notching table with adjustable stops - Standard!
•Manual back gauge for precise operation at all stations - Standard!
•CE Approved Cover inter-lock system for maximum safety - Standard!
•Surprisingly Quiet, smooth and precise operation due to robust welded framework - zero flex!
•Remote, three position foot switch for accurate control - Standard!
•Adjustable stroke control - Standard!
•Long life, multiple edge blades on shearing and notching stations - Standard!
•7 sets of round punches and dies included - Standard!
•T-slot punching base enables wide range of tooling options and easy adjustment - Standard!
•Two Piece, Self Centering Quick Release Punch Retaining System w/ Spanner Wrench - Standard!
•Easy Adjust, Swing Away Material Stripper - Standard!
•World Class, name brand components for years of hassle free productivity - Standard!
•Jog mode enables accurate tooling alignment in minimal time - Standard!
•Shear table w / scribed angle markings and material guides - Standard!
•Adapters to fit Cleveland Tool punch and die sets - Standard!
•Punch capacity up to 1 ½" round - Standard!
•Angle iron, Flat bar, Round and Square stock Shearing - Standard!
•Rectangular Notching - Standard!
•Hole punch - Standard!
•Multiple tooling options available - Contact Your Baileigh Representative for more information!
Five Station Hydraulic Ironworker
Baileigh's industry leading five station 50 ton Hydraulic Ironworker is the perfect addition to any fabrication shop where punching, shearing and notching is required in plate, bar, and various types of angle iron. This iron worker was designed and is manufactured to the highest standards in the industry, ensuring a lifetime of productivity for your enterprise.
All Baileigh Hydraulic Ironworkers utilize true vertical movement that has eliminated any sort of pivot and mechanism allowing for the smoothest punching station on the market. The extremely heavy duty all welded integrated steel frame and vertical motion allow the operator to punch at full capacity with no jarring or vibration, allowing for reduced tooling costs and longer machine life. The SW-50 has a deep 6" throat and can punch up to 1-9/16" OD x 3/8" thick material of mild steel. Stable, oversized work tables with locking material guides are coupled with a very visible metered scale allowing for fast setup and aid the operator during multiple production runs.
The shearing station has the ability to cleanly cut through metal with absolutely no left over waste (noting many other popular brands of Ironworkers leave a kerf or slug of waste). A solid material clamp can be quickly adjusted via a knurled handle. The operator table is oversized with locking material guides and scribed angle markings, to assist with multiple production runs. The material template allows for round, square, flat and angle iron sheering with optional profiles available. There is a quick position template for producing perfect 30, 45 or 60 degree angles in seconds.
The notching station allows for quick notches of plate, angel or U-channel in seconds. Proper guarding lifts out of the way when in production and drops down safely when not in use. The notching station has an oversized metered work table that helps keep material from lifting. Locking product stops are standard offering quick set up and additional accuracy when working on multiple production runs of the
|
|
Ad # 15250 | Ironworkers |
1953 |
Buffalo |
1/2 |
Good |
sold |
Photo /
More Info. |
58 ton: Buffalo #1/2 mechanical Ironworker
std mfg specs below Specifications
Punch ram pressure:58 tons
Punch throat:20"
Working height:38-7/16"
Punch number:664
Die number:14020
OD of die x height:2" x 1-1/8"
Die gauge line:7/8"
Flywheel RPM:307
Strokes per minute:44
Length of punch stroke:1-1/16"
Capacity of punch:1" x 5/8"; 13/16" x 3/4"
Angle shear capacity at 90 degrees:4" x 4" x 1/2"
Angle shear capacity at 45 degrees:3" x 3" x 5/16"
Length of angle shear stroke:1-1/2"
Rounds:1-5/8"
Squares:1-1/2"
Notcher:3" x 3" x 5/16"
Coper:2" x 3" x 3/8"
Motor:3 HP
Volts:208-220/440
Phase:3 Cycles 60
Amps:8.7-8.7/4.35
Approximate dimensions
73" x 50 x 82" high
Approximate weight:4,300 lbs
It can punch 13/16 in 3/4 plate,larger in thinner steel.It can shear 3x6x3/8 angle,5/8x6 flatbar and shear up to 1/2 plate of unlimited width using the bypass feature.
It can also punch to the center of a 2x2"angle iron leg.It will shear 1-5/8" round bar and depending on the tooling package do a whole lot more. |
|
Ad # 6981 | Ironworkers |
1959 |
BUFFALO |
NO. 2-1/2 |
Good |
sold |
Photo /
More Info. |
USED BUFFALO NO. 2-1/2 UNIVERSAL IRONWORKER: USED BUFFALO NO. 2-1/2 UNIVERSAL IRONWORKER
RAM PUNCH PRESSURE: 105 TONS
STROKES PER MINUTE: 44
DEPTH OF THROAT: 24"
SHEAR: 8" X 7/8" FLATS
3/4" PLATE
14" LENGTH OF KNIVES
24-1/4" WORK HEIGHT
PUNCH: 1-3/16" X 7/8"
1" X 1"
38-3/4" WORK HEIGHT
BAR CUTTER: 6" X 6" X 1/2" ANGLES 90 DEGREES
4" X 4" X 1/2" ANGLES 45 DEGREES
2-1/4" ROUNDS
2" SQUARES
45-3/8" WORK HEIGHT
BUILT IN 90 DEGREE NOTCHER ON PUNCH HEAD:
3" X 7/16" ANGLES
7/16" PLATE
3-1/4" DEPTH OF CUT
54-1/2" WORK HEIGHT
BUILT IN SQUARE COPER ON SHEAR END:
4" X 1/2" ANGLES
1/2" PLATE
2-1/4" WIDTH OF CUT
3-1/2" DEPTH OF CUT
48-1/4" WORK HEIGHT
ONE-SHOT LUBRICATION
MOTOR: 7-1/2 HP 1760 RPM |
|
Ad # 8343 | Ironworkers |
|
Buffalo |
1-1/2 |
Good |
sold |
Photo /
More Info. |
73 TON Buffalo Ironworker: USED 73 TON BUFFALO UNIVERSAL IRONWORKER
Punch-Tonnage:73 Tons
Hole Capacity:1-1/16" Through 3/4"
7/8" Through 7/8"
Throat Depth:20"
SPM Approx.:25
Shear-Plates:5/8"
Flats:6" x 3/4"
Length of Knives:12"
Coper-Angles:3" x 1/2"
Plates:1/2"
Width of Cut:2"
Depth of Cut:3"
Notcher-Angles:3" x 3/8"
Plates:3/8"
Depth of Cut:2-3/4"
Bar Cutter-Rounds:1-7/8"
Squares:1-3/4"
Angles:5" x 5" x 1/2"
EQUIPPED WITH:
Foot Pedal For Operation
Punch & Die Holder
Pushbuttons For Start-Stop
One Shot Oil Lubrication
5 HP 1800 RPM 220/440/3/60 Motor
|
|
Ad # 8351 | Ironworkers |
|
Buffalo |
50 ton |
Good |
Sold |
Photo /
More Info. |
50 Ton Buffalo Ironworker: USED 50 Ton BUFFALO IRONWORKER
Punch-Tonnage:50 Tons
Hole Capacity:1-1/16" - 5/8" Mild Steel
Throat Depth:20"
Work Height:38
Shear-Angles(90dg):4" x 4" x 1/2"
Angles(45dg):3" x 3" x 5/16"
Shear-Plates:1/2"
Flats:6" x 5/8"
Length of Knives:10"
Bar Cutter-Rounds:1-5/8"
Square:1-1/2"
Coper:3" x 3" x 3/8"
Notcher:3" x 3" x 5/16"
SPM Approx.:30
EQUIPPED WITH:
Foot Pedals For Operation
Bijur One Shot Oil Lubrication
Pushbuttons For Start - Stop
Punch & Die Holder
3 HP 1750 RPM 230/460/3/60 Motor
|
|
Ad # 8348 | Ironworkers |
|
Buffalo |
1/2 |
Good |
Sold |
Photo /
More Info. |
58 Ton Buffalo Ironworker: USED 58 TON BUFFALO IRONWORKER
Punch-Tonnage:58 Tons
Hole Capacity:1-1/16" Through 5/8"
Throat Depth:20"
SPM Approx.:44
Shear-Flats:9-3/8" x 1/4"
9" x 3/8"
8-1/8" x 1/2"
7" x 5/8"
Length Of Knives:9-3/4"
Bar Cutter-Rounds:1-5/8"
Squares:1/2" to 1-1/2"
Angles:4" x 4" x 1/2"
Notcher-Angles:3" x 3/8"
Plates:5/16"
Depth of Cut:2-3/4"
EQUIPPED WITH:
Foot Pedal For Operation
Pushbuttons For Start - Stop
Assortment of Punches & Dies
Punch & Die Holder
3 HP 1750 RPM 230/460/3/60 Motor
|
|
Ad # 12823 | Ironworkers |
70's |
Carlstadt |
N-58 |
Good |
sold |
Photo /
More Info. |
Bar/picket Twister machine 1/2" sq: Carlstadt bar twisting machine
1/2" sq solid rod w/ optional 5/8" acc
3/4HP
base 12" x 18"
some bushings included
Men E Uses no 2
Picket Twister-twists square bars quickly and easily for railings, grills ect.-bars remain straight after twisting
drum switch permits accurate control for bar end alignments
manuals |
|
Ad # 11142 | Ironworkers |
2007 |
Clark |
H-66 |
Very Good |
Sold |
Photo /
More Info. |
66 Tons: The CLARK H-66 is a 66-ton industrial grade Iron Worker featuring multiple ... |
|
Ad # 10910 | Ironworkers |
1998 |
clausing |
mm70 |
Very Good |
sold |
Photo /
More Info. |
70 ton: comes with tooling |
|
Ad # 9213 | Ironworkers |
|
custom |
30 ton ?? |
Good |
Sold |
Photo /
More Info. |
10-25 tons capacity-?: machine that will cut
4.5" flat bar shear
10-25 tons ??
3 x 3 angle iron shear
rod shear 1.5,1",3/4",1/2",3/8",1/4" Dia.
hole punch- approx 1" ??
40 ton 5" dia. cylinder
|
|
Ad # 11998 | Ironworkers |
95 |
Dvorak |
314 |
Excellent |
sold |
Photo /
More Info. |
40 Ton: Dvorak Iron Worker
Model 314
220 single Phase
40 Ton
Angle Shear
3" x 3" x 1/4"
Shear
1/2 x 6"
3/16 x 12"
Punch 1" 1/4" x 1/4"
|
|
Ad # 10839 | Ironworkers |
|
Dvorak |
314 |
Good |
sold |
Photo /
More Info. |
30: Little Scotchman Iron Worker Model 314.
This is a single phase machine. Has a full set of
Punches for the unit. Over 20 Punches.
$4000 for Unit and punches.
Have other Machine Shop Tools and Equipment For
Sale.
Iron Worker, Lathe, band saw, drill, wielder,
machine shop equipment
|
|
Ad # 7798 | Ironworkers |
1995 |
Edwards |
50 Ton Jaws IV |
Good |
SOLD |
Photo /
More Info. |
50 Ton Hydraulic Ironworker Edwards Model Jaws IV: Specifications:
Punch Capacity - 1" hole in 5/8" Plate
Shear Capacity - 10" x 1/2"
Round Capacity - 1"
Square Capacity - 1"
Angle - 3" x 3" x 3/8"
Coper - 2" x 3" x 5/16"
3 HP Main Motor |
|
Ad # 9811 | Ironworkers |
2007 |
Edwards |
65 Tion |
Fair |
sold |
Photo /
More Info. |
: 2007 Edwards Ironworker, 65 Ton, S/N 3886507, 3Ph, 440V, 60Hz, 9-3/4" Throa... |
|
Ad # 11538 | Ironworkers |
2005 |
edwards |
65 ton edwards ironwoker |
Excellent |
sold |
Photo /
More Info. |
65 ton edwards: 65 ton PUNCH US--- Metric
Tooling included: 6 x 6 angle shear
Max. Capacity 1-1/16" dia. in 3/4" plate 2.85cm x 1.90cm
Work Height 36" 91.44cm
FLAT BAR SHEAR
Max. Width 3/8" x 24" 0.95cm x 60.96cm
Max. Thick 1/2" x 14" or 1" x 4" 1.27cm x 35.56cm x 2.54cm x 10.16cm
Max. Round 1" 2.54cm
Max. Square 1" 2.54cm
Work Height 33-1/2" 85.09cm
ANGLE SHEAR
Max. Size 5" x 5" x 1/4" or 4" x 4" x 3/8" 12.7cm x 12.7cm x 0.63cm or 10.16cm x 10.16cm x 0.95cm
Work Height 42" 106.68cm
COPER / NOTCHER
Max. Capacity 2-1/2" x 6" x 3/8" 6.35cm x 15.24cm x 0.95cm
Work Height 35-1/2" 90.17cm
OPEN CAVITY
Specifications 11-1/2" wide x 9-3/4" tall 29.21cm x 24.765cm
Work Height 42" 106.68cm
GENERAL SPECS
Rated Capacity 65 ton
Throat Depth 9-3/4" 24.76cm
Open Height 8-1/8" 20.63cm
Shut Height 6-3/4" 17.14cm
Stroke 1-3/8" 3.49cm
Cycle Time 2 seconds
Electric Motor Standard 5 HP, 3 Phase, 208/240 v, 1725 rpm, 14 amp
Hydraulic Pump Size 10-1/2 gpm - 2 stage 39.74L per min - 2 stage
Valve Pressure 2800 psi 193.05bar
Reservoir 17 gallons 64.35L
Cylinder 3-1/2" ram 8.89cm
Dimensions: Base x Height 43" x 42" x 55" 109.22cm x 106.68cm x 139.7cm
Shipping Weight 4220 pounds 1914.15kg
Picture shown not actual machine but identical
Have angle Iron shear acc: 6 x 6 x 1/4" , no punches
very low hrs..
bought 2005 used maybe 10xs come get this tied of moving it around used on race car fab. |
|
Ad # 12185 | Ironworkers |
1998 |
Edwards |
JAWS IV |
Excellent |
sold |
Photo /
More Info. |
75 TON: Machine is in excellent shape, evrything works well. Not quite sure of the ... |
|
Ad # 9495 | Ironworkers |
1999 |
EDWARDS |
|
Good |
sold |
No Photo /
More Info. |
75 TON EDWARDS: |
|
Ad # 8344 | Ironworkers |
1980 |
Ficep |
ST/Super14 |
|
sold |
Photo /
More Info. |
72 Ton Hydraulic Ironworker: USED 72 Ton FICEP SUPER 14 IRONWORKER
Capacities:
Punch Tonnage:72 Tons
Stroke:1-1/32"
Hole Capacity:1-3/16" Thru 5/8"
1" Thru 3/4"
Throat Depth:13-1/2"
S.P.M. Approx.:74
Section Shear-Angles:5" x 5" x 1/2" (90dg)
3-1/2" x 3-1/2" x 3/8" (45dg)
Stroke:1-1/2"
Bar Cutter-Rounds:1-3/4" Round
1-9/16" Squares
Coper-Notcher-Plates:1/2"
Angles:4" x 3/8"
Width of Cut: 2-1/16"
Depth of Cut: 4"
Plate Shear-Flat Bars:7-1/2" x 5/8"
Length of Blade:10"
EQUIPPED WITH:
Pushbuttons For Start-Stop
Hand Lever For Operation
Punch & Die Holder
Small Assortment of Punches
1-Shot Oil Lubrication
Mounted on 13-1/2" High Portable
I-Beam
4 HP 440V/3/50 Motor
|
|
Ad # 4189 | Ironworkers |
1990 |
GEKA |
Geka Hydracrop #55A |
Very Good |
Sold |
No Photo /
More Info. |
GEKA 55-TON HYDRAULIC IRONWORKER :
IRONWORKERS
4" x 4" x 1/2" Geka Hydracrop #55A ,55 Ton, 20"thr,work tbl.w/gauge,12" shear
Capacity 55 Tons
Shear Capacities:
Maximum Flats: 5/8" x 12" or 3/4" x 8"
Maximum Angles: 4" x 4" x 1/2" or 4-1/2" x 4-1/2" x 3/8"
Maximum Bar: 1-9/16" Round & Square
Maximum Punch: 1-1/8" x 1/2" or 3/4" x 3/4"
Maximum Notch: 1-5/8" x 3-1/2" x 3/8" Thick
Throat Depth 20"
Stroke Speed 43
Motor 6½ H.P. 230/460 Volt, 3 Phase
Equipped With:
20" Deep Punch End Throat
Work Table on Punch and Coper Ends w/ Adjustable Back Stops
Electric Length Gauge
Electric Foot Pedals
20 plus punches & dies
Worklight |
|
Ad # 12857 | Ironworkers |
? |
Geka |
Micro Crop 36 |
Good |
sold |
Photo /
More Info. |
36 ton cap-Mild Steel: Geka Ironworker
Micro Crop 36
90 Degree Max. 3" x 3" x 5/16
45 Degree Max. 2" x 2"
220/440 Voltage
60 Cycle
Made in Spain
Capacity: Mild Steel
low hrs little use |
|
Ad # 11691 | Ironworkers |
|
Geka |
HYD-50, 50/A |
Excellent |
sold |
Photo /
More Info. |
50 ton: GEKA HYDRACROP HYD-50 HYDRAULIC IRONWORKER. This machine just recently came... |
|
Ad # 4613 | Ironworkers |
2001 |
Geka |
Hydraulic 110-A |
Excellent |
Sold |
Photo /
More Info. |
110 Ton Dual Station Hydraulic Geka Ironworker: Capacity:110 Ton
Round: 2"
Slot/Hole: 1 1/2" x 3/4"
Flat: 24" x 5/8"
Angle: 6 1/2" x 6 1/2" x 1/2"
40" stop on Shear
Dual Foot Switch
|
|
Ad # 5832 | Ironworkers |
1993 |
Geka |
70-S |
Good |
SOLD |
Photo /
More Info. |
77 Ton Geka Hydraulic Ironworker: Capacity 77 Tons
Shear Capacities:
Maximum Flats: 18"x 5/8", 12"x 3/4" or 10"x 1"
Maximum Angles: 5"x 5"x 1/2"
Rod: 1-3/4"
Throat Depth 12"
Stroke Speed 48 SPM (at 3/4" Travel)
Motor 12 H.P., 230/460V 3 Ph
Equipped With:
Built-in Notcher, Punch, Angle, Bar & Plate Shear
Automatic Cut Gauge Bar
Punch Table w/ Back Stop
(2) Electric Foot Pedals, for Simultaneous, Independant Operation
(46) Punch Sets w/ Rack
Worklight |
|
Ad # 7288 | Ironworkers |
2001 |
Geka/ Comeq |
Microcrop 36 |
Excellent |
Sold |
Photo /
More Info. |
40 Ton Ironworker, 8" x 1/2" shear, 1-1/4" x 3/8" hole, : 40 Ton capacity
Max round hole punch dia: 1-3/16" or 1" square
1-1/4" x 3/8" hole W/ 7" throat depth
8" x 1/2" shear capacity; 13-1/4" x 1/4" max:
Angle shear: 2 x 2 x 1/4" @ 45 deg or 3-1/8" x 3-1/8" x 5/16" @ 90 deg
lots of punches slot & rounds included type F16 style
foot switch
Shear length gage /stop acc.
|
|
Ad # 11448 | Ironworkers |
1980 |
Hill ACME |
#6 |
Excellent |
sold |
Photo /
More Info. |
95 Ton 15hp: Hill ACME 95 Ton
Dual Foot Switch
24" Throat Depth
Punching Capacity
1-1/4" Thru 7/8" ; 1-3/16" Thru 1"
1-1/2" Stroke 65 SPM
Plate Shear
6" x 1-1/8" 10" x 3/4" 14" x 1/2"
Bar Shear
2-3/16" Round 2" Square
Angle Stock
6" x 6" x 1/2" 4" x 4" x 1/2" Tees
Notcher
Rectangular........3-1/4" x 3-1/4" x 1/2"
90 Degree V.......1/2" x 2-1/4" Deep
|
|
Ad # 6466 | Ironworkers |
|
HILL ACME |
3 |
Very Good |
SOLD |
Photo /
More Info. |
4´´ X 4´´ X 1/4´´ HILL ACME #3 HYDRAULIC IRONWORKER: 4´´ X 4´´ X 1/4´´ HILL ACME #3 HYDRAULIC IRONWORKER:
PUNCHING CAPACITY ................... 33 TONS
MAXIMUM DIAMETER THROUGH THICKNESS .. 1-1/16´´ X 3/8´´
DIAMETER THROUGH MAXIMUM THICKNESS .. 7/8´´ X 1/2´´
DEPTH OF THROAT ..................... 12-1/2´´
LENGTH OF STROKE .................... 1´´
SHEARING CAPACITIES:
ANGLES .............................. 4´´ X 4´´ X 1/4´´
ANGLE AT 45 DEGREE .................. 2-1/4´´ X 2-1/4´´ X 1/4´´
FLATS ............................... 6´´ X 1/2´´
LENGTH OF PLATE SHEAR BLADES ........ 9´´
ROUNDS .............................. 1-1/4´´
SQUARES ............................. 1-1/8´´
COPER ON SHEAR END
5 HORSEPOWER MAIN MOTOR |
|
Ad # 6467 | Ironworkers |
|
HILL ACME |
#3 HYDRAULIC |
Very Good |
SOLD |
Photo /
More Info. |
4´´ X 4´´ X 1/4´´ HILL ACME #3 HYDRAULIC IRONWORKER: 4´´ X 4´´ X 1/4´´ HILL ACME #3 HYDRAULIC IRONWORKER:
PUNCHING CAPACITY .................... 33 TONS
MAXIMUM DIAMETER THROUGH THICKNESS ... 1-1/16´´ X 3/8´´
DIAMETER THROUGH MAXIMUM THICKNESS ... 7/8´´ X 1/2´´
DEPTH OF THROAT ...................... 12-1/2´´
LENGTH OF STROKE ..................... 1´´
SHEARING CAPACITIES:
ANGLES ............................... 4´´ X 4´´ X 1/4´´
ANGLE AT 45 DEGREE ................... 2-1/4´´ X 2-1/4´´ X 1/4´´
FLATS ................................ 6´´ X 1/2´´
LENGTH OF PLATE SHEAR BLADES ......... 9´´
ROUNDS ............................... 1-1/4´´
SQUARES .............................. 1-1/8´´ |
|
Ad # 9767 | Ironworkers |
|
Hill Acme Kling |
No. 5 |
Good |
SOLD |
Photo /
More Info. |
80: Plates up to 5/8
Flat bars up to 3/4x6
Square bars up to 1 3/4
Round bars up to 1 7/8
Angles square up to 5x5x1/2
Max punch 1 1/16 hole thru 3/4 plate |
|
Ad # 9126 | Ironworkers |
1997 |
HMI |
7810-25///C25-#8010-25 |
Excellent |
Sold |
Photo /
More Info. |
80 Ton -dual operator: 80 Ton'
10 inch throat x 14 high
Punches 15/16 thru 15 /16 max dia 6" with special tooling,
std round punching cap 1-3/8 hole x 1-1/4" square hole
Notching 3" x 3" x 3/8"
Punching:8 max stroke
flat bar shear: 25In max
1/8" x 24", 3/8" x 15" , 1/2" x 12 in, 3/4" x 8 in
Angle shear: 4 x 4 x 3/8 W/15 " mtl stop option
10 HP motor
Lots of Tooling-Shown...
|
|
Ad # 8341 | Ironworkers |
|
HTC |
IW-100 |
Good |
sold |
Photo /
More Info. |
100 Ton Hydraulic Ironworker: USED 100 Ton HTC Hydraulic IRONWORKER
Punch-Tonnage:100 Tons
Stroke:1-1/2"
Hole Capacity:1-1/4" x 7/8"
Throat Depth:24"
Flat Shear-Angles (90 Dg.):6" x 6" x 5/8"
Angles (45 Dg.):4" x 4" x 1/2"
Flat:24" x 1/2"
Length of Knives: 24"
Bar Shear-Rounds:2"
Squares:2"
Coper/Notcher-Coper:3-1/2" Square x 3/8" Thick
Notcher:3-1/2" x 90 Dg. - 3/8" Thick
SPM Approx:11.3 Shear Section
15.8 Punch Section
Equipped With:
Freestanding Control w/Dual
Palm Buttons for Operation -
Each End
Pushbuttons for Start-Stop & Energy
Saver
Selector Switches For Jog-Run &
Jog Up-Down; Punch-Iron Worker
Small Amount of Extra Punches & Dies
Parker Hydraulic Pump Driven By
15 HP 1760 RPM 230/460/3/60 Motor
|
|
Ad # 14468 | Ironworkers |
80's? |
Iron crafter |
30-30 |
Good |
sold |
Photo /
More Info. |
30 ton-single phase 110/1: Iron Worker: Iron Crafter
single phase 110/1
Model 30-30
30 Ton
2” stroke
capacities:
punch: 1" hole thru 3/8" MS\ild steel
flat bar:1/2" x 6"
angle iron:3" x 3" x 1/4"
mitre angle iron @ 45 deg : 2 x 2 x 1/4"
round:1"
square: 3/4"
120V single phase
Large quantity of tooling over 75
punches & dies many new also oversize hole punch
plate tooling and cusom punch holder table. Great
home shop or farm machine!
|
|
Ad # 10647 | Ironworkers |
|
Ironcraft |
41/41 |
Good |
SOLD |
Photo /
More Info. |
3" x 3" x 5/16",Ironcrafter,40 Ton,Hyd,Punch,Flats,Sq&Rds,Infd&StockSt: One Each Used - Ironcrafter 40 Ton Hydraulic
Ironworker, Model 41/41, Serial Number 79E193
Specifications:
Punching: 40 Tons, 1" Dia x 1/2" Thick Max (Relational)
Maximum Dia 1-1/4"
Stroke: 2"
Shearing Angles: 3" x 3" x 5/16" at 90 Degrees
2" x 5/16" at 45 Degrees
Round Bar: 1-1/4" and Square Bar at 1"
Flats: 6" x 5/8"
Electrics: Presently on 220/3/60 Htz
Equipped With:
Many Sets Of Assorted Punches & Dies, P40 P & P82 D
Lifting Eyebolt
144" Adjustable Stock Stop
118" Infeed Table With Gravity Roller Holdowns
Condition: Good Operating and Quiet
|
|
Ad # 5835 | Ironworkers |
|
Ironcrafter |
HMW |
Good |
Sold |
Photo /
More Info. |
30 Ton Independantly Operated, Dual Station Hydraulic IronWorker: Independantly Operated, Dual Station IronWorker
Capacity 30 Tons
Throat Depth 6½"
Open Height 9¾"
Shut Height 7¾"
Stroke 2"
Motor 2 H.P.
Equipped With: Foot Pedal (1) Station
Hand Control (1) Station |
|
Ad # 9677 | Ironworkers |
2006 |
Kingsland |
M80 |
Excellent |
Sold |
Photo /
More Info. |
80 ton: Machine is in excellent condition. Includes die set from 5/16" to 1 1/2" in... |
|
Ad # 9283 | Ironworkers |
2005 |
Kingsland |
60P625-24" throat |
New |
SOLD |
Photo /
More Info. |
50 US tons: New Kingsland Hydraulic Ironworker. Modele #60P625-24" throat
comes with new automatic positioning unit x 20ft
Modele # KA-11D-20ft
Factory Specs below-verify
MULTI 60 Ton Punching
Max. Punching Capacity
1-1/4"" hole in 1/2" steel 1" hole in 3/4" steel
Stroke Length
2-1/8"
Standard throat (D option)
12" or (25")
Largest Hole (optional)
2-1/4" (6-3/8")
Cycles/min. - 3/4" travel
34
Working Height
40-1/2"
Shearing
Flat bar, max. thickness
9" x 3/4"
Flat bar, max. width
14-3/8' x 3/8"
Angle flange trim/max 45 deg
4" x 5/8"
Angle Cutting
90 deg. cutting
5-3/16" x 1/2"
45 deg. mitre cutting
2-3/4" x 3/8"
working height
44-1/2"
Section Cutting
round/square
1-3/4"
Channel/beam (option)
5-3/16" x 2-1/2"
T-profile (option)
3-1/2" x 1/2" 3
Notching
Material thickness
3/8"
width - rectangle
1-3/4"
depth - rectangle
3-1/2"
depth - vee
2-3/8"
angle flange - max. profile
4" x 3/8"
working height
35"
Specifications
Motor
7.5 HP
Nett. Weight
3,462 lbs
Machine Dims. (LxWxH)
65" x 28" x 70"
|
|
Ad # 8353 | Ironworkers |
|
Kling |
3 |
Good |
Sold |
Photo /
More Info. |
33 Ton KLING HYDRAULIC IRONWORKER: USED 33 Ton KLING IRONWORKER
CAPACITIES:
Tonnage:33 Tons
Punch:11/16" Hole Thru 1/2" Plate
Shear-Plates:3/8"
Flat Bars:4" x 1/2"
Square:1-1/4"
Round:1-3/8"
Angles:4" x 4" x 1/4"
Length of Blade:9"
Coper-Angles:2-1/4" x 2-1/4" x 1/4"
Plates:1/4"
Angles-Mitre:2-1/2" x 2-1/2" x 1/4"
Tees-Square:3" x 3" x 1/4"
S.P.M. Approx.:35 @ 3/8" Length Maximum
20 @ 1" Length Minimum
EQUIPPED WITH:
Foot Pedal Operation
Punch & Die Holder
Pushbuttons For Start - Stop
2 HP 1740 RPM 220/440/3/60 Motor
|
|
Ad # 7159 | Ironworkers |
|
Manville |
Model "0" |
Needs Work |
Sold |
Photo /
More Info. |
Manville Model "0" Single Station Punch : Generally in good mechanical condition but does need a new drive motor.
Throat: 4"
Present Die Plate: Removable
Cavity 4" x 3"
Dept of Die Plate: 2-1/2" |
|
Ad # 13708 | Ironworkers |
1977 |
Metal Muncher |
MM61C |
Good |
sold |
Photo /
More Info. |
49 Ton: Metal Muncher Ironworker 49 Ton
Model: MM61C
Capacity: 49 Ton
Volts: 220 / Single Phase
RATED PUNCHING CAP:49 TON
DIA/THICKNESS: 1-1/16" IN 1/2"
1-3/8" IN 3/4"
BAR SHEAR: 1" X 6", 1/2" X 12"
ANGLE SHEAR: 4" X 4" X 3/8"
COPER SQUARE NOTCHER. 3" X 3" X 3/8"
THROAT: 9"
BED SLOT WIDTH: 4"
OPERATING PRESSURE: 3500 PSI
MOTOR: 7HP
|
|
Ad # 14011 | Ironworkers |
1997 |
Metal Muncher |
MM-70: Fabri Center |
Good |
sold |
Photo /
More Info. |
70 Ton Fabrication center: Metal Muncher 70 ton hyd. Fabrication center Ironworker
press brake tooling included-shown
Punch capacity: 1" thru 7/8" steel
flat bar shear 24" max: 1/4" x 24",3/8" x 20", 3/4" x 12", 1" x 7"
Square punch (optional): 1-1/4"
Round Punch(optional): 1-3/8"
Angle Iron shear:4" x 4" x 3/8"
Coper Notcher: 3" x 3" x 3/8"
used liked a press brake & ironworker combined press brake tooling |
|
Ad # 9164 | Ironworkers |
98 |
Metalmucher |
MM70-18 |
Excellent |
Sold |
Photo /
More Info. |
70 ton: Std. specs below-please verify
USED METAL MUNCHER IRON WORKER
MODEL MM70 A YEAR: 1998
Specifications: (at 65,000 PSI tensile)
Punch Capacity: 70 ton (1” thru 7/8” mild steel)
Throat Depth: 9”
Throat Height: 14”
Punch Stroke: 0-7”
Strokes per minute: 40 at ½”
Platen size: 11” x 48”
Shear Capacity: 1” x 7”, ¾” x 12”, 3/8” x 20”, ¼” x 24”
Standard Angle Capacity: 4” x 4” x 3/8”
Standard Coping Square Notch: 3” x 3” x 3/8”
Electric Motor: 7-1/2 HP
Electrics: 240/1
Weight: 4,100 lbs
Features and Standard Equipment:
•Five built in work stations
•Two cylinders, independently controlled for two man operation
•Punch has fully automatic cycle and can be inched, stopped and reversed at any time
•3” Solid piston ram with 0-7” stroke for punching, bending, pressing, etc.
•Stripper is adjustable for height
•Punch adjustment depth is micro switch controlled
•Quiet, high speed, direct drive hydraulic pump with pressure gauge
•18” Punch with 4 way die
•Punch gauging table
•Misc punches and dies to excellent condition |
|
Ad # 13870 | Ironworkers |
1975 ? |
Mubea |
BF 10 |
Fair |
sold |
Photo /
More Info. |
21 Ton-mechanical type: Mubea Ironworker
Model: BF 10
Capacity: 21 Ton
mechanical ironworker
Electrical: 230/ 3 phase
Round Holes...1 1/4" in 3/16" & 9/16" in 7/16"
Number of Strokes Per Minute...72,
Depth of the Throat...2"
Plate Shear...6"x 5/16",
Angles...3x3x5/16"@
90A degree 2x2x4 1/4"@ 45A degree,
Round Bar & Square Bar...1 3/32",
Channel...2 3/4"x 1/2"x 6"@ 90A degree
Some tooling included |
|
Ad # 14155 | Ironworkers |
2002 |
Mubea |
HIW 750/510 |
Good |
sold |
Photo /
More Info. |
82 Ton: Mubea Ironworker
Capacity: 82 Ton
Model: HIW 750/510
Electrical: 230/460/3 phase
Punching:
Max. Tonnage.......82 Ton
Punch Capacity.....1-1/4” Hole Thru 3/4” Plate
Max Stroke Length .3-1/8"
Throat.............20"
Bar Shear:
Flat Max. Thickness...12" x 3/4”
Flat Max. Width.......18” x 5/8”
Angle Shear:
Max. Size.............6" x 6" x 1/2"
Coper Notcher:
Max Size..............2-1/16" x 3-1/2" x 7/16"
Round/Square:
Max. Size ............2"
Motor Size............10 HP
(5) Separate Work Stations:
Punching......Standard
Angle.........Standard
Flat Bar......Standard
Notching......Standard
Rod/Square....Standard
|
|
Ad # 5498 | Ironworkers |
1982 |
MUBEA |
HIW600 |
Good |
SOLD |
Photo /
More Info. |
66 TON MUBEA HYDRAULIC IRONWORKER: PUNCH CAPACITIES:
TONS ------------------------------------ 66
DIAMETER THRU THICKNESS ----- 1-1/8" THRU 11/16"
DIAMETER THRU THICKNESS ----- 15/16" THRU 7/8"
THROAT DEPTH ------------------------------ 10"
LENGTH OF STROKE -------------------------- 4"
SHEARING CAPACITIES:
ANGLES, 90 DEGREE --------------- 5" X 5" X 1/2"
ROUND BARS ------------------------------ 1-3/8"
SQUARE BARS ----------------------------- 1-1/4"
FLAT BARS ------------------------- 8" X 1"
FLAT BARS ------------------------- 18" X 1/2"
MAIN DRIVE MOTOR --------------------- 10 HP A.C.
EQUIPPED WITH ---
2 SLIDES
5 WORK STATIONS
COPER/NOTCHER
2 FOOT CONTROLS |
|
Ad # 5497 | Ironworkers |
1974 |
MUBEA |
"OPTIMA" 48-4 |
Good |
SOLD |
Photo /
More Info. |
48 TON MUBEA "OPTIMA" 48-4 UNIVERSAL MECHANICAL IRONWORKER: WITH 3 CLUTCHES
PUNCHING CAPACITY -------------- 48 TONS
1-1/8" THRU 1/2"
1" THRU 9/16"
THROAT DEPTH ---------------------- 12-5/8"
SECTION SHEAR:
4" X 4" X 3/8" ANGLES AT 90 DEG.
2-1/2" X 2-1/2" X 5/16" ANGLES AT 45 DEG.
3-1/2" X 3/8" TEES
PLATE SHEAR WITH STANDARD 2-1/2 DEG. BLADE:
7-1/2" X 5/16"
3-1/2" X 1/2"
BAR SHEAR:
ROUND 1-3/8"
SQUARE 1-1/4"
COPER NOTCHER:
REGULAR COPING, ANGLES 3" X 5/16"
TRIANGULAR NOTCHING, ANGLES 2-1/2" X 5/16"
STROKES PER MINUTE ------------------------ 55 SPM
MOTOR -------------------------- 2 HP 220/3/60
EQUIPPED WITH ---
EXTRA BLADES AND BIG ASSORTMENT OF PUNCHES |
|
Ad # 12264 | Ironworkers |
1976 |
Mubea |
KBL 100-50 |
Good |
sold |
Photo /
More Info. |
100 Ton-mechanical trype: Mubea-KBL 100-50
100 Ton
Shear 10" x 3/4" Max
Round Shear 2" 3/16
Hole Punch 2" 3/8 x 1" 3/8
T Slot 4" x 1/2"
Note:see tag pic for more details.. |
|
Ad # 8347 | Ironworkers |
|
Peddinghaus |
66/110H |
Good |
Sold |
Photo /
More Info. |
66 Tons Peddinghaus Hydraulic Ironworker: USED 66 TON PEDDINGHAUS Hydraulic IRONWORKER
Punch-Tonnage:66 Tons
Hole Capacity:1-1/16" Through 21/32"
Stroke:9/16" - 1-3/16"
Throat Depth:20"
SPM Approx.:30
Shear-Angles:5" x 5" x 1/2"
3-1/2" x 3-1/2" x 3/8"
Flats:20" x 7/16"
16" x 5/8"
6" x 3/4"
4" x 7/8"
Length Of Knives:20"
Notcher-Plates:1/2"
Angles&Tees:3-1/2" x 3/8"
Bar Cutter-Rounds:1-3/4"
Squares:1-5/8"
EQUIPPED WITH:Electric
Foot Switch
Pushbuttons For Start - Stop
Selector Switch For Raise-Off-Lower
Emergency Stop Button
Punch & Die Holder
Pressure Gauge
Hydraulic Pump Driven By
10 HP Motor
|
|
Ad # 12741 | Ironworkers |
|
Peddinghaus |
Peddiworker 880 |
Good |
sold |
Photo /
More Info. |
88 Ton: Peddinghaus Peddiworker 880
Voltage 220/3 Phase
88 Ton
hydraulic
8" Throat on punch
12" Shear Blade
5" Angle Shear
Notcher
std specs below
Model # Peddiworker 880
Tons : 88
Capacity: 4'' x 4'' x 3/8'' - 5"x 5"x 1/2" angle 88 Capacity: 4'' x 4'' x 3/8'' - 5"x 5"x 1/2" angle 5/8" x 14" bar 1-1/4" thru 3/4" 1-3/16" sq. & 1 ¼'' round
5/8" x 14" bar
1-1/4" thru 3/4"
1-3/16" sq. & 1 ¼'' round bar
Voltage : 230
Approx wt: 2,650 lbs.
Approx. dim. : 49'' x 27'' x 72'' t
Equipped with:
Coping notcher |
|
Ad # 11335 | Ironworkers |
2004 ? |
Peddinghaus |
110/140 |
Good |
sold |
Photo /
More Info. |
140 Ton: Peddinghaus Ironworker:
Standard Features
Dual Operator Iron Worker with 5 Workstations
Quick change, high-performance punch unit
Plate and Flat Bar Shear with Ledge Table
Gauge Stop and in feed guide
Section Shear for shearing angle iron, rounds and squares
Square or triangular notcher
110 Ton Punch Station
Throat Depth 20"
The Peddinghaus ironworker, Peddimax model 110/140, is a two (2) slide Ironworker, complete with five (5) work stations. Ironworker Ironworker The 110 ton punch slide on this Ironworker is equipped as standard with a universal die block for standard structural steel punching applications for ironworkers. A flat die bolster and die block can be provided as an option. All forces generated in the ironworker through punching, shearing and notching, are equally distributed throughout the slide and body plate frame design, not through the hydraulic cylinder. This design eliminates shock and stress on the ironworker hydraulic system
Angle (L1):6" / 152.4 mm
Angle (L2):6" / 152.4 mm
Angle (T):0.500 " / 12.7 mm
Tonnage:110T / 99.8 t
Power:10hp / 10.0
Stroke:2" / 50.8 mm |
|
Ad # 15306 | Ironworkers |
2012 |
Peddinghaus |
PeddiMax No.1 |
Excellent |
sold |
Photo /
More Info. |
140 ton: 140 ton Peddinghaus Hydraulic Ironworker
Model: PeddiMax No.1
Year: 2012
Condition: like new
Machine Specifications:
Punch tonnage - 140
Punch stroke, infinitely adjustable - 3/8" to 2"
Punch strokes per minute (3/4mm) - 29
Punch throat depth - 20"
Punch capacity with flat die bolster - 1-1/2" through 1"
Punch capacity with universal die block - 1-1/4" through 1"
Flat bar shear - 20" x 3/4"
Flat bar shear working height - 28.4"
Angle shear capacity - 6" x 6" x 1/2"
Round bar shear - 2"
Square bar shear - 2"
Channels, 90° (with special blades) - up to 8"
I-beams, 90° (with special blades) - up to 8"
Notcher (width x depth) - 2-9/16" x 3-3/8"
Notcher capacity - 1/2"
Oil capacity - 27 gallons
Motor - 15 HP
Approximate dimensions - 80" x 40" x 75" high
Approximate weight - 6,100 lbs
Includes:
• flat shear blades, 201/2 inch long, also for shearing angle iron 45°
• material support table with gauge stops on the flat shear station
• section shear knife for 90° shearing angle iron as well as rounds and squares
• quick-change punching attachment up to 1 1/2 inch Ø, with flat die
bolster, for punches and dies of the blue series or with universal die
block for die no. 3
• height-adjustable swing-way stripper with exchangeable plate
• square notching attachment
• material support table on the notcher station
• two two-stage foot pedals and electrical control elements on the
punch station and the notcher station
• hydraulic low pressure spotter for foot operation
• connecting sockets for external engagement, e.g. via electrical
contact length stop
• integrated hydraulic power pack
• three-phase A.C. motor, 230 / 460 Volt, 60
Includes 2 set of new blades
|
|
Ad # 11272 | Ironworkers |
1977 |
Peddinghaus |
210 Super 13 |
Good |
sold |
Photo /
More Info. |
66 Short Tons Mechanical Ironworker: Peddinghaus Model # 210 Super 13
66 Short Tons, with some Tooling |
|
Ad # 3214 | Ironworkers |
80's? |
Peddinghaus |
210/11 |
Good |
sold |
No Photo /
More Info. |
40 Ton Machanical Ironworker: 40 Ton
20" throat on punch
Dual operator Station
Includes several punches & Dies |
|
Ad # 12177 | Ironworkers |
2004 ? |
Peddinghaus |
110/140 |
Good |
sold |
Photo /
More Info. |
110/140: |
|
Ad # 7797 | Ironworkers |
|
Peddinghaus |
210A/16 |
Good |
Sold |
Photo /
More Info. |
70 Ton Mechanical Ironworker Peddinghaus Model 210A/16: Specifications:
Capacity 70 Tons
Punch Capacity1-1/16” in ¾” or 7/8” in 7/8”
Angle Capacity5” x 5” x ½” @ 90 deg
Flat4-3/8” x 1” or 11” x 3/8”
Notcher 9/16”
Speed45 SPM |
|
Ad # 9687 | Ironworkers |
|
pedinghaus |
210 AD/20 |
Good |
sold |
Photo /
More Info. |
210 ton mechanical : 210 ton mech. type
6x6x1/2 capacity
V-notcher-4x4x1/2
flat bar shear-13-3/8x1/2
2-5/16 max hole punch
19" throat on punch
punch cap.-1-3/16thx7/8 thick or 1x1 hole
tooling-lots of punches & dies |
|
Ad # 10320 | Ironworkers |
|
Pettinghouse |
210 super 13 |
Good |
sold |
Photo /
More Info. |
30 ton: 60 MP capacity -30 ton
will punch 7/8" hole in 1" mtl
angle shear 4 x 4
bar shear
8" flat bar shear in 1" mtl
coper/notcher
dual foot pedals
includes: punches: 1/8" up to 1" with some shapes..slots, squares. approx 50 punches
|
|
Ad # 9815 | Ironworkers |
2008 |
Pirahna |
P50 |
Excellent |
Sold |
Photo /
More Info. |
50 Ton: |
|
Ad # 12492 | Ironworkers |
|
Piranha |
P120 |
Good |
SOLD |
Photo /
More Info. |
120 Ton: Piranha P120 Iron Worker
CAPACITIES & SPECIFICATIONS: MODEL P-120 120 TON
Throat Depth 12" Open Height 15-1/2"
Closed Height w/o Die Block 10-1/4" Work Stations From Floor 44"
Hydraulics:
Pump GPM
System R/V PSI
15
3500 Stroke Length 5-1/4"
Bar Shear:
Round(Min. to Max.)
Square (Min. to Max.)
1/2" to 2"
1/2 " to 1-3/8" Motor STD. 230/460 1800 rpm
Punch:
Max. Material
Max. Hole *Special Tool
Platen Table Size (D-W) 120 Tons
1-1/2" thru 1"
*5" thru 1/4"
14-1/2" x 21" Coper-Notcher (Tons)
(Mat.) 95
4" x 6" x 3/8"
Dimensions
(NET) W-L-H
35 " x 90" x 68-1/2" Plate Shear 20-1/2" Long
1" x 12"
3/4" x 18"
1/2" x 20"
Bending Attachment 12" Optional Lengths Available Weight (NET) lbs 6200
Strokes Per Minute 40 @ 3/4" Angle Shear (Max.) 6" x 6" x 5/8"
|
|
Ad # 7871 | Ironworkers |
1994 |
Piranha |
P-50 |
Good |
Sold |
Photo /
More Info. |
50 Ton Hydraulic Ironworker Piranha Model P-50: (1) Piranha 50 ton Hydraulic Ironworker
Throat depth - 8"
Open height - 13-1/2"
Closed height w/o die block - 9-1/4"
Stroke length - 4-1/4"
Punch capacity - 50 tons
... material thickness - 13/16" through 3/4"
... strokes per minute - 60 @ 1/2"
... platen table size - 10" x 17"
Bar shear capacity, round - 1/4" to 1-1/2"
Bar shear capacity, square - 1/2" to 1"
Coper-notcher (56 tons) - 2-3/4" x 4" x 1/4"
Plate shear (14-5/8") - 3/4" x 10" , 5/8" x 14"
Angle shear, maximum - 5" x 5" x 3/8"
Brake: 8" long
Hydraulic pump (10.5 GPM) - 2600 PSI, 18 gallons
Motor - 10 HP, 1800 RPM--
Includes Punch Dies & Press Brake Die (4-Way die ranging from approx 1" wide to 2-1/2" wide) |
|
Ad # 14091 | Ironworkers |
1992 |
Piranha |
P-50 |
Good |
sold |
Photo /
More Info. |
50 Ton: Piranha P50 Ironworker
Features such as urethane stripping, automatic
shear hold-downs, quick change tooling, low blade
rake angles, and six standard work stations,
coupled with its ergonomic design and clear lines
of sight to all tools, including shear blades,
place Piranha ironworkers far above the
competition. These features produce higher quality
fabricated parts, and make Piranha hydraulic
ironworkers easier to use than any other
ironworker.
PIRANHA SINGLE OPERATOR IRONWORKERS are the most
versatile line of hydraulic ironworkers in the
market today. Built in America for over 25 years,
Piranha Single Operator Ironworkers provide six
(6) standard workstations:
1. Punching
2. Bending
3. Round or Square Bar Shearing
4. Flat Bar Shearing
5. Angle Iron Shearing (no slug loss)
6. Coping/Notching
throat: 8"
open height: 13.5"
stroke: 4.250"
punch: 50 ton-13/16 thru 3/4"..max hole size: 5"
thru 1/8" mtlw special tooling
punch table: 10 x 17"
angle shear: 5" x 5" x 3/8" or 4" x 4" x 1/2"
bar shear: round-1/4" to 1-1/2" square: 1/2" to 1"
coper/notcher: 2-3/8" x 4" x 1/4"
press brake acc included 8" 4 way
strokes 60 per min
motor: 10 hp
foot pedal or joystick control
several punches & dies included approx a dozen
note: main pix mfg stock photo
|
|
Ad # 10905 | Ironworkers |
2004 |
piranha |
p50 |
Very Good |
sold |
Photo /
More Info. |
piranha p50 ton: click link for specs
http://www.piranhafab.com/ |
|
Ad # 7809 | Ironworkers |
2005 |
Piranha |
P-50 |
Excellent |
Sold |
Photo /
More Info. |
50 Ton Hydraulic Ironworker Piranha Model P-50: Used P-50 PIRANHA 5"x 5"x 3/8" - 50 Ton Hydraulic Ironworker
General Specifications:
Tonnage Capacity At Punch End: 50
Throat Depth: 8"
Closed Height w/o Die Block: 9-1/4"
Bar Shear; Round Min. to Max. 1/4" to 1-1/2"
Square Min. to Max. 1/2" to 1"
Punch End; Max. Material 13/16" thru 3/4"
Max. Hole (special tool) 5" thru 1/8"
Platen Table Size: 10" D x 17" W
Bending Attachment: 8"
Strokes Per Minute: 60 at 1/2"
Open Height: 4-1/4"
Standard Motor: 10 HP AC
Coper-Notcher; (Mat) 2-3/4" x 4"x 1/4"
Plate Shear; 15" Long
3/4"x 10"
5/8"x 15"
Angle Shear; 5"x 5"x 3/8" w/Special Tool: 4"x 4"x 1/2"
Equipped With:
Automatic Urethane Hold Down on Punch Stripper & On Angle Plate & Bar Shear
Front 5 Position Joy Stick
Electric Limit Switches To Set Stroke Control When Using Foot Pedal
Foot Pedal Controls
Standard Knives
Coper-Notcher Station
Assorted Punch & Dies
Optional Quick Set Punch Gauging Table
Optional Mechanical Back Gauge
Optional 8" (Press Brake Type) Bending Attachment
Pipe Notching Attachment
Integral Lifting Lug
Replacement Cost NEW Today Including Cost Of Options Approximately $15,400. At Quoted Price, We Will Off Limited 6 Month Guarantee From Factory Rep. |
|
Ad # 7810 | Ironworkers |
1978 |
Piranha |
P3 |
Good |
SOLD |
Photo /
More Info. |
50 Ton Hydraulic Ironworker Piranha Model P3: (1) Piranha 50 ton Hydraulic Ironworker
Throat depth - 8"
Open height - 13-1/2"
Closed height w/o die block - 9-1/4"
Stroke length - 4-1/4"
Punch capacity - 50 tons
... material thickness - 13/16" through 3/4"
... strokes per minute - 60 @ 1/2"
... platen table size - 10" x 17"
Bar shear capacity, round - 1/4" to 1-1/2"
Bar shear capacity, square - 1/2" to 1"
Coper-notcher (56 tons) - 2-3/4" x 4" x 1/4"
Plate shear (14-5/8") - 3/4" x 10" , 5/8" x 14"
Angle shear, maximum - 5" x 5" x 3/8"
Hydraulic pump (10.5 GPM) - 2600 PSI, 18 gallons
Motor - 10 HP, 1800 RPM--
|
|
Ad # 7813 | Ironworkers |
|
Piranha |
P-50 |
Good |
Sold |
Photo /
More Info. |
50 Ton Hydraulic Ironworker Piranha Model P-50: Used Piranha 50 Ton Ironworker
Angle Shear Capacity: 5”(L1), 5”(L2), (T) .375”
Tonnage: 50
1 Press brake die and misc. punches & dies.
Dual controls |
|
Ad # 7812 | Ironworkers |
|
Piranha |
P-50 |
Good |
Sold |
Photo /
More Info. |
50 Ton Hydraulic Ironworker Piranha Model P-50:
SPECIFICATIONS:
• Throat Depth 8"
• Open Height 13½"
• Closed Height w/o Die Block 9¼"
• Stroke Length 4¼"
Punch:
• Capacity 50 Tons
• Max. Material 13/16" thru ¾"
• Max. Hole (Special Tool) 5" thru 1/8"
• Strokes per Minute 60 @ ½"
• Platen Table Size (D-W) 10" x 17"
Bar Shear:
• Round (Min. to Max.) ¼" to 1½"
• Square (Min. to Max.) ½" to 1"
Coper-Notcher:
• Tons 56
• Material 2¾" x 4" x ¼"
Other:
• Plate Shear 14-5/8" Long • 3/4" x 10" • 5/8" x 14"
• Angle Shear (Max.) 5" x 5" x 3/8"
• Bending Attachment 8"
Hydraulics:
• Pump GPM 10.5
• System R/V PSI 2600
• Fluid Capacity 20 Gallons
Misc.:
• 10 HP
• 3 Phase
• Integral Lifting Lug Provides Instant Portability
• Work Station Height 42" from Floor (Approx.) |
|
Ad # 15245 | Ironworkers |
1998 |
Piranha |
P-3 |
Good |
sold |
Photo /
More Info. |
47 ton: Piranha #P-3 Ironworker
47 ton
lots of tooling shown
press brake acc 8"
manuals
Piranha P-3 Hyd. Ironworker, 47-Ton,
7.5, HP,
1" Punch, 1.5
Round Bar 5/8 x 12" Plate,
5 x 5 x 3/8 Angle,
2 3/4 x 4" Coper-Notcher |
|
Ad # 10719 | Ironworkers |
2003 |
Piranha |
P-50 |
Excellent |
Sold |
Photo /
More Info. |
50 ton: Piranha P-50,
Piranha Ironworker P50 CAPACITIES & SPECIFICATIONS
Throat Depth 8" Open Height 13-1/2"
Closed Height w/o Die Block 9-1/4" Work Stations From Floor 42"
Hydraulics:
Pump GPM
System R/V PSI
10.5
2600 Stroke Length 4-1/4"
Bar Shear:
Round(Min. to Max.)
Square (Min. to Max.) Optional
1/4" to 1-1/2"
1/2" to 1" Motor STD. 230/460 1800 rpm
Opt. Phase and Voltage
On Request 10 HP 3 Phase
Punch:
Max. Material
Max. Hole *Special Tool
Platen Table Size (D-W) 50 Tons
13/16" thru 3/4"
*5" thru 1/8"
10"X17" Coper-Notcher (Tons)
(Mat.) 56
2-3/4" x 4" x 1/4"
Dimensions
(NET) W-L-H 24"x66"x60" Plate Shear 14-5/8" Long
3/4" x 10"
5/8" x 14"
voltage: 220/1 phase
Bending Attachment 8" Optional Lengths Available Weight (NET) lbs 2600
Strokes Per Minute 60 @ 1/2"
The Piranha Ironworker P50 features Automatic Urethane Hold Downs on the Punch Stripper and Bar, Plate and Angle Shear. This assures precise cuts and longer punch and blade life.
Piranha Ironworker P50 STANDARD FEATURES:
Complete Punching Attachment with split dove tail mounting
14 Punch and Die sets
8" bending Attachment with split dove tail mounting
Automatic Urethane Hold Down on the Punch Stripper and on Angle,
Plate and Bar Shear
Extra Oil
FilterChip Buckets (2 each)
Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral
Remote Electric Foot Switch that can be connected at either end of the machine
Electric Limit Switches that can be set for troke control when using foot control
Set of Round Bar Knives [2 way] (customers choice to 1-1/2")
Set of 11.25 Plate Shear Knives [4 way]
Set of 14.625 Plate Shear Knives [4 way] (instead of Round Bar Knives and 11.25 Plate Shear Knives)
Set of Angle Knives [8 way top] [2 way bottom]
Set of Coper Knives [2 way top] [4 way bottom]
Coupling Wrench & 3/8" Allen Wrench
Integral Lifting Lug for instant portability
Low clearence die-Extra flush mount die holder for thin gauge material.
Punch and die storage included. |
|
Ad # 7811 | Ironworkers |
1986 |
Piranha |
P3 |
Good |
Sold |
Photo /
More Info. |
50 Ton Hydraulic Ironworker Piranha Model P3: Piranha Model P-3 50 Ton Hydraulic Ironworker
Angle Shear Cap (L1): 5 "
Angle Shear Cap (L2): 5 "
Angle Shear Cap (T): .375 "
Tonnage: 50 Ton
Coper/Notcher: 2-3/4" x 4" x 1/4"
Power: 10 HP
Throat: 8 " |
|
Ad # 12567 | Ironworkers |
|
Piranha |
P70 |
Good |
sold |
Photo /
More Info. |
70 ton: The Piranha Model P-70 extends your work week.
putting more power, more precision on the job, day
after day. The P-70 features Automatic Urethane
Punch Strippers and Bar, Plate and Angle Shear
Hold Downs to assure precise cuts and longer punch
and blade life.
Complete Punching Attachment with split dove
tail mounting
10 Punch and Die sets
12" bending Attachment with split dove tail
mounting
Automatic Urethane Hold Down on the Punch
Stripper and on Angle
Plate and Bar Shear
Front and rear 5 position joy stick controls
(electric) with jog up & down, fast up & down,
neutral
Remote Electric Foot Switch that can be
connected at either end of the machine
Electric Limit Switches that can be set for
stroke control when using foot control
Set of Round Bar Knives [2 way] (customers
choice to 2)
Set of 14.50 Plate Shear Knives [4 way]
Extra Blank Knife to extend shear to 18"
Set of Angle Knives [8 way top] [4 way
bottom]
Set of Coper Knives [2 way top] [4 way
bottom]
Chip Buckets (2 each)
Extra Oil Filter
Coupling Wrench & 3/8" Allen Wrench
Integral Lifting Lug for instant portability
|
|
Ad # 8349 | Ironworkers |
|
Piranha |
P-50 |
Good |
Sold |
Photo /
More Info. |
50 Ton Piranha Hydraulic Ironworker With Brake Attachment: USED 50 TON PIRANHA HYDRAULIC IRONWORKER With Brake Attachment
Punch-Tonnage:50 Tons
Hole Capacity:13/16" Through 3/4" Mild Steel
Throat Depth:8"
Stroke Length:4-1/4"
Working Height:40"
Shear - Plate:14" x 5/8" Mild Steel
10" x 3/4" Mild Steel
4" x 1" Mild Steel
Angle:5" x 5" x 3/8" Mild Steel
Length Of Knives:14-1/2"
Bar Shear-Rounds:1/4" to 1-1/2"
Squares:1/2" to 1"
Coper-Notcher:4" x 2-3/4" x 1/4"
EQUIPPED WITH:
8" Press Brake Attachment
Small Assortment of Punches & Dies
Joystick Control For Operation
Both Sides
Hydraulic Pump Driven By
10 HP 1725 RPM 230/460/3/60 Motor
|
|
Ad # 9285 | Ironworkers |
|
Piranna |
P-50 |
Good |
Sold |
Photo /
More Info. |
P50 --50 ton: 50 ton
1/16th dia thru 1/2
13/16th dia. thru 3/4
1x4" flat bar
3/4 x10,5/8x15,5x5"
coper notcher-2 3/4x4x1/4
4x4x1/2 angle
11/2 round bar
1"square
foot switch
some tooling |
|
Ad # 8346 | Ironworkers |
|
Proma Omes |
CH-70 |
Good |
Sold |
Photo /
More Info. |
70 Ton Hydraulic Ironworker: USED 70 TON PROMA-OMES IRONWORKER
Hydraulic
Punch-Tonnage:70 Tons
Hole Capacity:1-1/8" Through 3/4" Mild Steel
Throat Depth:12"
Section Shear-Angles(90dg):5" x 5" x 1/2"
Angles(45dg):3" x 3" x 3/8"
Flats Iron:18" x 5/8"
12" x 3/4"
Length Of Knives: 18"
Bar Cutter-Rounds:1-3/4"
Squares:1-3/4"
Notcher:15/32"
EQUIPPED WITH:
Electric Foot Switch
Selector Switches For Run - Jog -
Full PSI & Low PSI
Pushbuttons For Hydraulic On - Off
Emergency Stop Button
Punch & Die Holder
Hydraulic Pump Driven By
5 HP 1800 RPM 220/440/3/60 Motor
|
|
Ad # 12765 | Ironworkers |
1992 |
Rogers Manufacturing |
Presshear 10# |
Good |
sold |
Photo /
More Info. |
18 Ton: Rogers Manufacturing -Presshear # 10
Power Ironworker
PRESSHEAR # 10
PUNCH CAPACITY - 18 TONS
ACCESSORIES SOLD SEPARATELY
PIPE NOTCHER - SPEAR POINT
BENDING DIE - COPER
SQUARE TUBING CUTTER
NOTCHER - PUNCH OILING SYSTEM
This machine is both a punch and a shear.
Cast-frame - high tensile ductile iron.
Operates on 1 HP, 1750 RPM motor. Three phase or single phase available.
Foot operated, one stroke safety clutch.
Front is conventional press and can be used for punching or forming
Regular die sets will fit this machine
Adjustable ram.
Hold-down easily adjusted.
Punch can be lowered to material for center punching and will remain until clutch is engaged.
Blades are tool steel - Can be re-sharpened and adjusted.
Punch to back of throat - 3"
Bar hole for lowering punch by hand.
Blade guard, foot lever guard, and gear guard for operators protection
Approximately 48 strokes per minute.
basic specs below-lots of acc availablr for this machine
Punch 3/4 x 1/4
Throat 3"
2" x 2" x 1/4 Angle Iron
3/4" Round
3/4" Square
1/4"x 4" Flats
2 x 1/2 x 1/8" channel
punches 7/8" round hole thru 1/4" mtl
2" stroke
shut height : 6-1/2"
2" Stroke
more details at http://www.rogers-mfg-inc.com/
|
|
Ad # 13104 | Ironworkers |
2003 |
Scotchman |
6509-24M |
Good |
sold |
Photo /
More Info. |
65 Ton: Scotchman Iron Worker
Model 6509-24M
65 Ton
220/1 Single Phase Machine
9" Throat Depth
24" Flat Bar Shear with 4-Way Reversible Blade (1" x 6", 1/4" x 24")
Angle Shear Capacity at 90° 6" x 6" x 3/8" and 5" x 5" x 1/2"
Many Punches included. Tubing Notcher only other tooling. |
|
Ad # 7438 | Ironworkers |
1996 |
Scotchman |
4014C |
Good |
Sold |
Photo /
More Info. |
40 Ton Scotchman 4014C Ironworker : GENERAL SPECIFICATIONS
Punching Capacity: 40 Ton
Punching Capacity: 1" in 1/2"
Throat Depth: 6"
Flat Bar Shear Length: 14"
Bar Shear Capacity: 5/8" x 5"
Strokes Per Minute, Light Material: 40
Strokes Per Minute, Max. Capacity: 12
EQUIPPED WITH
3 HP Motor
Adjustable Stroke Controls |
|