| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 7297 | Power Squaring Shear (Hydraulic) |
| — |
W.A. WHITNEY |
609-250 |
— |
Sold |
Photo /
More Info. |
| 45 ton W.A. WHITNEY Hydraulic Angle Shear, Model 609-250: 45 ton W.A. WHITNEY Hydraulic Angle Shear, Model 609-250
Capacity 45 tons
Shearing capacity 6”x6”x1/2”
EQUIPPED WITH:
Remote pendant control
14’ Stock feed table
Hydraulic power unit
Work light |
|
| Ad # 5122 | Power Squaring Shear (Hydraulic) |
| — |
Cincinnati |
4FL16 |
— |
sold |
No Photo /
More Info. |
| CINCINNATI 16' X 1/2" HYDRAULIC SHEAR: CAPACITY IN MILD STEEL:
AT NOMINAL RAKE OF 3/8" ------------------ 1/2" X 16'
AT INCREASED RAKE OF 1/2" ---------------- 5/8" X 16'
LENGTH BETWEEN HOUSINGS -------------------- 16'-3"
DEPTH OF THROAT ---------------------------- 18"
BACK GAUGE RANGE --------------------------- 48"
SPEED, FULL LOAD DOWN ---------------------- 135 IPM
SPEED, RETURN ------------------------------ 290 IPM
STROKES PER MINUTE - FULL LENGTH CUT ------- 13
STROKES PER MINUTE - 24" CUT --------------- 40
HOLDDOWNS (12" CENTERS WITH EXTRA HOLDDOWNS
AT BOTH ENDS) ---------------------------- 19
HOLDDOWN FORCE, TONS ----------------------- 55
APPROXIMATE SHIPPING WEIGHT ---------------- 66,900 LBS.
--------------------------------------------------------------------------------
EQUIPPED WITH
- HOLDDOWN AND KNIFE GUARDS
- ADJUSTABLE RAKE
- ADJUSTABLE STROKE
- PNEUMATIC OPERATED ROLLER BALL TOP TRANSFERS IN TABLE
- AUTOMATIC PRESSURE LUBRICATION
- SINGLE STROKE CONTROL, INCLUDING "INCH" AND "RUN"
OPERATION
- HYDRAULIC HOLDDOWNS
- WATER COOLED OIL COOLER
- 10' SQUARING ARM
- 2 FRONT SUPPORT ARMS
|
|
| Ad # 3057 | Power Squaring Shear (Hydraulic) |
| 1988 |
DARLEY |
S1250-4 |
— |
sold |
Photo /
More Info. |
| 4' X 10 GA. DARLEY HYDRAULIC SHEAR: CAPACITY THICKNESS, MILD STEEL ------------ 4 MM ( .1575" )
CAPACITY THICKNESS, STAINLESS STEEL ------- 3 MM ( .1181" )
STROKES PER MINUTE ------------------------ 51
CAPACITY LENGTH --------------------------- 50"
NUMBER OF HYDRAULIC HOLDDOWNS ------------- 7
MAIN DRIVE MOTOR -------------------------- 10 HP A.C.
EQUIPPED WITH ---
24" PROGRAMMABLE BACK GAUGE
40" SQUARING ARM
FRONT ARM
ELECTRIC FOOT CONTROL
|
|
| Ad # 6971 | Power Squaring Shear (Hydraulic) |
| 2003 |
ALLSTEEL |
E |
Excellent |
sold |
Photo /
More Info. |
| USED 10' X 1/2" ALLSTEEL MODEL E CNC HYDRAULIC SHEAR: USED 10' X 1/2" ALLSTEEL MODEL E CNC HYDRAULIC SHEAR
CAPACITY: 1/2" M.S.
3/8" S.S.
CUTTING LENGTH: 120"
BACK GAUGE LENGTH: 36"
RATED RAKE ANGLE: 5/8"
GAP: 12"
NUMBER OF HOLDDOWNS: 16
SPEEDS: 9/40 SPM
MAIN MOTOR: 40 HP
ELECTRICS: 575/3/60
EQUIPPED WITH:
ALLSTEEL CNC BACKGAUGE
46" SQUARING ARM
(2) FRONT SUPPORT ARMS
SHADOW LINE CUTTING GUIDE
REAR SAFETY SWING-UP CAGE
OPERATORS MANUAL |
|
| Ad # 14328 | Power Squaring Shear (Hydraulic) |
| 2013 |
Knuth |
KHT 4006 F |
Excellent |
sold |
Photo /
More Info. |
| 13ft x 1/4in shear: Knuth hyd. shear 13ft x 1/4" capacity-like new
max cut length : 13.17in
max cut thickness: 0.24 in steel,
back gage: 24"
strokes per min: 15
Standard Equipment:
• NC control for
motorized rear stop and
motorized kerf adjustment
• Standard upper and lower knife
• 3 support arms with measuring scale
• Lateral stop
• Foot switch
• Shadow graph display of cut line
• Operator manual
• Machine frame and cutter bar are designed
with extremely solid, carefully machined
weldment structures to withstand highest loads
• The proven swing beam design allows small
knife angles for maximum cut quality and
minimum distortion at the workpiece
• A rigid rear stop with premium preloaded ball
screws and low-maintenance linear guides
ensure long-term dimensional stability of the
workpiece
• Shadow graph indicates the cut line
• Hydraulically operated hold-down provides
uniform and reliable fixation of the workpiece
• Infinitely adjustable cut length saves
valuable time when producing small parts
• Premium hydraulic and electric components
Note: factory refurbished -like new condition with warranty.. |
|
| Ad # 11976 | Power Squaring Shear (Hydraulic) |
| 1988 |
Betenbender |
1/2 x 10' |
Excellent |
sold |
Photo /
More Info. |
| 1/2" x 10ft: Betenbender 10 ft x 1/2" capacity
open gap type end--can cut continous sheet
36" power back gage -
4' squaring arm
ball table transfers
roller table
power rake adjust
light beam
61 hrs on machine, very nice machine |
|
| Ad # 8037 | Power Squaring Shear (Hydraulic) |
| 2000 |
Pexto |
52" x 16 ga |
Excellent |
sold |
Photo /
More Info. |
| 52" x16 GA steel : This machine is in like new condition. Never used for cutting steel. Used f... |
|
| Ad # 9190 | Power Squaring Shear (Hydraulic) |
| 1998 |
Barcorp/Barer Engineering |
Preci-Cut |
Excellent |
sold |
Photo /
More Info. |
| 10' x 1/2" hyd. shear: Programmable NC Backgauge, Inch/Metric switchable, can be preset for up to ... |
|
| Ad # 10536 | Power Squaring Shear (Hydraulic) |
| 2008 |
Betenbender |
8' x 10ga |
Excellent |
sold |
Photo /
More Info. |
| '08 Betenbender 8' x 10ga Shear: 15hrs on machine
NC Control 5 Station" Go-To", Solid Table Top-Segments
One Shot Lube, 48" Support Arms/Front Gauges
|
|
| Ad # 8253 | Power Squaring Shear (Hydraulic) |
| 2000 |
PEXTO |
PH 52 C |
Excellent |
Sold |
Photo /
More Info. |
| 52 in x 16GA PEXTO Power Squaring Shear: Cut Length: 52"
Capacity: 16 ga |
|
| Ad # 15634 | Power Squaring Shear (Hydraulic) |
| 2007 |
CN |
QC 12Y-8X3200 |
Excellent |
Sold |
Photo /
More Info. |
| 10ft. x 1/4 inch (8 mm): CN#QC 12Y-8X3200
Hydraulic Shear
Model: QC 12Y-
8X3200
Make: CNMazak
Capacity:
10ft. x 8MM (.25
inches)
squaring arm
power back gage
Electrical:
220/3phase
Weight:
14,000 lbs.
Powered
Backguage
Owner's
Manual:included |
|
| Ad # 6945 | Power Squaring Shear (Hydraulic) |
| 1995 |
LVD |
HST-E 50/10 |
Excellent |
Sold |
Photo /
More Info. |
| LVD MODEL HST-E 50/10 HYDRAULIC POWER SHEAR: LVD MODEL HST-E 50/10 HYDRAULIC POWER SHEAR
Capacity: 10' x 1/2" (Mild Steel)
Overall Length of Blades: 123"
Distance Table to Floor: 39-1/2"
Self-Compensating Hydraulic Holddowns
All Steel Welded Frame Construction
EQUIPPED WITH:
LVD MNC-10 CNC Control
Pneumatic Sheet Holder (Rear Mounted)
Moveable Scrap Bin
40" Front Operated Power Back Gauge
(1) Pair 4-Edge Knives
(1) Extra Set of New Knives
12 Ft. Squaring Arm
(2) Front Support Arms
AC Main (Pump) Drive Motor
Electrical Controls
Self-Contained Hydraulic Power System
Electric Foot Switch Operation |
|
| Ad # 11774 | Power Squaring Shear (Hydraulic) |
| 1998 |
AFM |
MK6-21 |
Excellent |
sold |
Photo /
More Info. |
| 10ft x 1/4" cap: 10 ft x 1/4" mild steel capacity
124" max cut length
power back gage-32"
6ft squaring arm
roller table
Quality european built-HD
adj. mtl thickness lever 1/32, 1/16, 3/16, 1/4"
foot pedal
very nice machine-low hrs |
|
| Ad # 5749 | Power Squaring Shear (Hydraulic) |
| 1982 |
HTC |
CL-625-7 |
Excellent |
sold |
Photo /
More Info. |
| 7' x 5/8" HTC hydraulic shear,: Flush floor design, no pit
Shearing length 88"
Capacity, mild steel 5/8"
Blade size 1 1/8" x 5"
Rake angle/foot .500"
Number of hold-downs 4
Clearance hold-downs to table 2 3/4"
Speed:
full cut 11 SPM
1/2 cut 17 SPM
12" cut 25 SPM
Speed:
down 94 IPM
up 170 IPM
|
|
| Ad # 15296 | Power Squaring Shear (Hydraulic) |
| 2012 |
Standard Industrial |
AS375-10 |
Excellent |
sold |
Photo /
More Info. |
| 10ft x 3/8": Model: AS375-10 STANDARD INDUSTRIAL 10' X 3/8" Hydraulic Power Shear,
(New 2012)
Specifications:
Capacity, mild steel:10' x 3/8"
stainless steel: 10ft x 1/4"
Shearing tons:60
Number of hold downs:11
Bore of hold downs:2"
Hold down force:21 tons
Equipped With:
Guillotine design, American built, single horizontal hydraulic cylinder
All steel construction (80,000 PSI capacity rated)
Manually operated, side adjustable, quick-change blade gap adjustment
Shadow line for precise shearing
PLC touch screen control mounted on swiveling pendant
36" Capacity heavy duty front operated power back gauge controlled from PLC.
The back gauge is equipped with Go-To function, multi-job programming, pro-
grammable back gauge retraction, inch/metric conversion, and
stroke counter.
4' Capacity right hand squaring arm with precision inlaid scale
(2) Front support arms
(2) T-slots & (2) hand slots in heavy duty machine table
Remote electric foot pedal
(2) extra Sets of shear blades
Machine is wired for 3/60/460 volt operation.
Approximate Weight: 21,000 Lbs.
|
|
| Ad # 7088 | Power Squaring Shear (Hydraulic) |
| 2001 |
AFM |
MK13-31 |
Excellent |
Sold |
Photo /
More Info. |
| 10ft x 1/2" hyd. shear : AFM Hydraulic Power Shear 1/2" x 10' capacity, P.F.O.B.G. Manual blade gap,... |
|
| Ad # 11775 | Power Squaring Shear (Hydraulic) |
| mid 90s |
Pacific |
? |
Excellent |
sold |
Photo /
More Info. |
| 12 ft 1/2" open ended: Pacific Hydraulic open ended
12ft x 1/2 inch Shear capacity
Year: mid 90s
4 Ft Squaring arm (not shown)
36" back Gauge
Open ended Shear Throat apox 24" to blade. |
|
| Ad # 12001 | Power Squaring Shear (Hydraulic) |
| 2008 |
GMC |
HS-0425E |
Excellent |
sold |
Photo /
More Info. |
| 4ft x 1/4": 4ft x 1/4" capacity
power back gage w/ readout
foot switch
very nice-low hrs
capacity: steel 4' x 1/": stainless: 4' x 10ga
strokes per min: 12-20
throat: 18"
main motor: 10 HP
std machine specs below--
Standard Features:
·ISO 9001 certified
·Taiwan machines
·24” German SIKO Front Operated power back gauge w/ micro adjustment 0.004” , inch / metric digital display for “E” models only
·Automatic Quick Change Blade Gap Adjustment (BGA), no lever required
·CE standard “OMERO” electric control system
·Meet OSHA safety standard code
·Shadow line for accurate straight cutting
·Adjustable cutting length and stroke
·Ball transfer plates on worktable for easy loading workpiece
·Well balanced and sturdy all steel machine frame
·German made Hydraulic logic system centrally located and quiet
·Hydraulic hold-downs with anti-mar neoprene
·Shear blades are high grade carbon/chrome alloy steel and hardened
to 60 HRC, 2-edge indexable upper blade and 4-edge indexable bottom blade
·Full length viewable safety finger guard to protect operator from cutting hazard
·Removable safety foot pedal, automatic blade raise up on removal of foot from pedal
·Hydraulic, electrical overload protection
·Compact operator control panel
·All motors are overload protected & low voltage control system
·Jog or continuous auto cycle cutting operation modes
·Standard Equipment for GMC Heavy Duty Hydraulic Shears:
·24” German SIKO Front Operated Power Back Gauge
with micro adjustment , accuracy 0.004” inch/metric digital display for “E” models
·1 each 60” squaring arm with inlaid inch/metric dual scale
·Automatic quick change blade gap adjustment (BGA)
·Shadow line for accurate straight cutting
·Material support and drop back chuter
·Upper and bottom blade set with 4-edge on bottom & 2-edge on upper
·2 each 24” front support arms
·Hydraulic hold-downs with anti-mar neoprene
·Full length viewable finger guard
·Removable safety foot pedal
|
|
| Ad # 8246 | Power Squaring Shear (Hydraulic) |
| 2002 |
National |
NH4825 |
Excellent |
sold |
Photo /
More Info. |
| 4ft x 1/4in National Hydraulic Shear: Length: 4 ft
1/4" mild steel capacity
1/8" Stainless steel
20 strokes per min
24 gal oil res.
7.5 hp |
|
| Ad # 8228 | Power Squaring Shear (Hydraulic) |
| 2000 |
Amada |
3060 |
Excellent |
Sold |
Photo /
More Info. |
| 10 x 1/4" Hydraulic Shear with Back Gauge : Shear 2000 Amada model 3060 10 ‘x 6mm .236 (1/4 x 10’) with front operated ... |
|
| Ad # 7298 | Power Squaring Shear (Hydraulic) |
| 1983 |
BERTSCH |
Series 500, Model 8-120 |
Excellent |
Sold |
Photo /
More Info. |
| 10’ x 1/2” BERTSCH Series 500, Model 8-120, Hydraulic overdriven Shear: 10’ x 1/2” BERTSCH Series 500, Model 8-120, Hydraulic overdriven Shear
All steel construction, flush floor, no pit required
Shearing length 120”
Shearing capacity ½” mild steel
Back gage range 48”
Nominal rake ½”
Number of hold-downs 10
Hold-down tonnage 40
Blade size 1” x 4”
Ram speed down 1.82 in/sec.
Ram speed up 4.6 in/sec.
Cycles, full cut 10
Cycles, half width cut 19
EQUIPPED WITH:
48” 2-Speed front operated power back gage with display and
swing away feature
4-edge blades
10’ R.H. Squaring arm with scale and stop
48” front arm extensions
Adjustable of rake angle
Manual blade clearance adjustment
Remote electric foot pedal control
Light beam shearing gage
Built-in ball transfers in table
Trabon one-shot lubrication
60”x 144”x 33” High portable steel work support table with
built-in ball transfers and casters (front location)
40 HP 3/60/230-460 Volt Motor and controls
Dimensions: Shear only (does not include front arms): 163” LR x 115 ½”FB x 121”High |
|
| Ad # 9058 | Power Squaring Shear (Hydraulic) |
| 2007 |
Betenbender |
16-10 |
Excellent |
Sold |
Photo /
More Info. |
| 16ft x 10ga. (1/8 in )capacity: ** MADE IN THE U.S.A. **
BETENBENDER HYDRAULIC SHEAR QUOTE
Model 16-125, 16' x 10ga.(mild steel)
SPECIFICATIONS:
Capacity - A-36 Mild Steel (80,000 lb. tensile) 10ga.
304 Stainless Steel(At Highest Rake) 10ga.Non Production
Main Motor (H.P.) ............................ 15
Nominal Cutting Length ........................ 196 inches
Number of Holddowns ........................... 28
Knives (Four(4) Cutting Edges) ................ 196"x1"x4"
Rake of Moving Blade (per foot) ............... 1/4
Back Gauge Range .............................. 36 inches
Strokes Per Minute ............................ 15
Oil Reservoir (Hydraulic Oil Included). . . . . . . 56 Gallons
Shipping Weight ............................... 20,000 lbs.
Machine Dimensions:
Overall Height ....... 61 inches
Overall Length .... 204 inches
Overall Width .. 76 inches(Including Backgauge)
Electrical Requirements ................. 230V-28amp/460V-14amp
Recommended Power Line .................. 230V-8ga/460v-12ga
BED - Steel one piece box section, stress relieved; welded to side frame insures positive alignment of bed and housings with beam supports that have removable wear tops which allow (1) convenient change to solid top and (2) plates with pin gauging.
RAM - Steel, stress relieved. Truss rod construction assures blade parallelism without consuming, short span adjustments.
POWER RAKE - allows change of blade rake angle for minimum camber & twist.
HYDRO-MECHANICAL HOLDDOWN - firmly grips material to prevent movement and
tipping. Optional urethane gripping pad protects soft and polished materials from marking.
ALLOY BRONZE GIBS - provides long service life and allow minimum running clearance for accurate control of blade clearance setting.
FOOTSWITCH CONTROL - is activated from a fully shrouded portable footswitch operating on 120 volts.
continued>>>
16' x 10ga. cont'd -2-
DRIVE - two hydraulic cylinders pushing or pulling directly on crosshead, no rotating pin action saving on wear.
HYDRAULIC VALVES - in manifold block for a minimum of fitting and piping; "C" frame motor for precision alignment of pump.
STANDARD EQUIPMENT
36" Power Backgauge With Hour Meter
L.E.D. Readout 48" Squaring Arm With Inlaid Scale
NEMA/Square D Electrics Light Beam/Shadow Line
All Hydraulic Fluid Included All Steel Construction
American Made Motor Disconnect Switch
Hydraulic Self-Compensating 1” x 4” Knives - (4) Cutting Edges
Holddown Bar Assembly Disconnect Switch
Power Adjust Variable Rake Manual Swing Up Backgauge
16ft cut length x 10Ga. capacity (1/8")
solid table top
one shot lube
361 run time(power on) hrs on machine, very low actual cut time!
Automec Fully programmable fron power back gage
5 preset programmable power 36 in back gage |
|
| Ad # 14076 | Power Squaring Shear (Hydraulic) |
| 1980 |
American-Hercules |
375120 |
Fair |
Sold |
Photo /
More Info. |
| 10ft bed, 3/8 capacity: American-Hercules Hydraulic Plate Shear
10' bed 3/8" Capacity - Mild Steel
Model #375120, S/N: 375120444 |
|
| Ad # 1534 | Power Squaring Shear (Hydraulic) |
| — |
American Hercules |
Hydraulic |
Fair |
sold |
Photo /
More Info. |
| Hydraulic Plate Squaring Shears: Specs: 12ft x 1”
|
|
| Ad # 8303 | Power Squaring Shear (Hydraulic) |
| — |
Cincinnati |
5FL12 |
Good |
Sold |
Photo /
More Info. |
| 12ft x 5/8inCINCINNATI HYDRAULIC METAL SHEAR: 12 FT. X 5/8" CINCINNATI HYDRAULIC METAL SHEAR
Capacities:
12' x 5/8" Mild Steel - Nominal
12' x 3/4" @ 11/16" Rake Increased
Length of Knives:124"
Distance Between Housings:12'3"
Gap:18"
Rake Angle:1/2"
Holddowns:15
Distance Under Holddowns:1-1/2"
Holddown to Knife Edge:15/16"
Floor to Top of Bed:32"
Speeds Approx.:135"/Minute - Full Load Down
290"/Minute - Up
S.P.M. Approx.: 12 @ Full Length
33 @ 24" Length
EQUIPPED WITH:
36" Front Operated Power Back Gauge w/Pushbuttons For Fine Adjustment
Forward - Rapid Traverse Forward -
Backward & Direct Reading Dial
10' Squaring Arm
(2) Stock Support Arms
Electric Foot Switch
Pushbuttons For Start - Stop &
Ram Stop
Selector Switch For Inch - Single -
Continuous
Rake Angle Adjustment
Stroke Length Adjustment
Extra Set of Blades
Automatic Oil Lubrication
Shadow Light Beam Shearing
(4) Dovetail Slots in Top of Bed
Dovetail Slot in Front of Bed
Rear Parts Chute
1/2 HP 1550 RPM 240/480/3/60 Back
Gauge Motor
Hydraulic Pump Driven by
40 HP 1780 RPM 230/460/3/60 Motor
|
|
| Ad # 14013 | Power Squaring Shear (Hydraulic) |
| — |
Accurshear |
81356 |
Good |
Sold |
Photo /
More Info. |
| 6 Ft x 10 Ga(1/8"): Accushear # 81356 hyd. shear
capacity: 6ft x 10ga steel
Metal shop has a 6 foot used accurshear model
81356
good condition and well maintained will shear 10ga
steel - 14 ga SS - 1/4 Alum
Manuel Back gauge |
|
| Ad # 15493 | Power Squaring Shear (Hydraulic) |
| 1987 |
LVD |
JS 25/10 |
Good |
sold |
Photo /
More Info. |
| 10ft x 1/4": LVD Hydraulic Shear
Model: JS 25/10
Length of Cut:
10ft
Max Thickness:
1/4"
Total Power: 15
HP
Electrical: 230/
3 phase
Tons: 16.5
power back gage
30" ?
squaring arm |
|
| Ad # 7756 | Power Squaring Shear (Hydraulic) |
| — |
Rockwell Hydra-Mechanical |
SU-1066 |
Good |
Sold |
Photo /
More Info. |
| 72" x 10 Gauge: Rockwell Hydra-Mechanical Power Squaring Shear
Model: SU-1066 Serial#: 1043
Capacity:10 Gauge
Cut Length:72"
Over All Size:92" W x 80" D x 60" High
Weight:8,000 Lbs. Approx.
Equipped With:
36" Front Operated Power Back Gauge
72" Squaring Arm
24" Front Support
|
|
| Ad # 5501 | Power Squaring Shear (Hydraulic) |
| 1960 ? |
PACIFIC |
375S14ARH |
Good |
Sold |
Photo /
More Info. |
| 5/8" X 14' PACIFIC MODEL 375S14ARH HYDRAULIC PLATE SHEAR: CAPACITY IN MILD STEEL ----------- 5/8" X 14'
RATED RAKE ANGLE ----------------- 5/16" PER FOOT
MAXIMUM RAKE ANGLE --------------- 1/2" PER FOOT
DISTANCE BETWEEN HOUSINGS -------- 14'3"
WORKING HEIGHT AT TABLE -------------- 34-3/4"
THROAT DEPTH --------------------------- 18"
HYDRAULIC SYSTEM MOTOR ---------------- 30 HP A.C.
MACHINE REQUIRES PIT FOR LOWER APRON - 4-3/4" DEEP
EQUIPPED WITH ---
48" FRONT OPERATED POWER BACK GAUGE
(2) FRONT SUPPORT ARMS
POWER RAKE ADJUSTMENT
ELECTRIC FOOT SWITCH
HYDRAULIC HOLDDOWNS
BLADE AND HOLDDOWN COVER
PUSHBUTTON CONTROLS
SELF CONTAINED HYDRAULIC SYSTEM
BLADE CLEARANCE ADJUSTMENT
BALL TRANSFERS BUILT INTO BED
PLANT OWNED, CAN BE SHOWN IN OPERATION |
|
| Ad # 8298 | Power Squaring Shear (Hydraulic) |
| — |
HTC |
250-10A |
Good |
sold |
Photo /
More Info. |
| 10ft x 1/4in HTC HYDRAULIC SHEAR: 10 FT. X 1/4" HTC HYDRAULIC SHEAR
Capacity: 10'4" x 1/4" Mild Steel
Length of Knives:10'4"
Distance Between Housings:10'4"
Rake Angle:11/32"
Holddowns:9 (Hydraulic)
Floor to Top of Bed:32"
S.P.M. Approx.:23 Full Width Cut
38 Half Width Cut
Speeds Approx.:220"/Min. - Down
293"/Min. - Up
EQUIPPED WITH:
36" Front Operated Power Back Gauge
w/Selector Switch For Fast In -
Fast Out & Pushbutton For Slow In
Electric Foot Switch
Pushbuttons For Start - Stop
Extra Set of Blades
(2) T-Slots in Top of Bed
Hydraulic Pump
Driven by 25 HP 1750 RPM
230/460/3/60 Motor |
|
| Ad # 13324 | Power Squaring Shear (Hydraulic) |
| 1998? |
Atlantic |
HD-25-12 |
Good |
sold |
Photo /
More Info. |
| 13' x 1/4": Used Atlantic Hydraulic Power Shear
Model: HD25-12,
Capacity: 1/4" x 13'
Capacity (Mild Steel) 1/4"
Max. Cutting Length 13'
Rake angle 1.3 Degree
Number Of Hold Downs (Hydraulic) 21
Back Gauge 1" - 39"
Stroke Per Minute 15 - 45
Dimensions 190" x 86" x 72"
Weight 24,000 LBS.
Equipped With:
Front Operated Power Back Gauge
Power Rake Adjustment
Power Stroke Length Control
Square Arm
Ball Transfer Table
Electric Foot Pedal
Horsepower:20
|
|
| Ad # 8296 | Power Squaring Shear (Hydraulic) |
| — |
DREIS AND KRUMP |
10ft x 10 ga |
Good |
Sold! |
Photo /
More Info. |
| 10 ft x 10 ga Dreis and Krump Hydraulic Shear: 10 FT. X 10 GAUGE DREIS AND KRUMP HYDRAULIC SHEAR
Capacity:10' x 10 Ga. Mild Steel
Length Of Knives:122"
Distance Between Housings: 131-1/2"
Gap:2-1/2"
Rake Angle:1/8"-5/16" (Variable)
Holddowns:17
S.P.M. Approx:60/33-Min/Max Rake W/ Full Length Cut
92/72-Min/Max Rake W/ 24" Length Cut
Floor To Top Of Bed:32"
EQUIPPED WITH:
36" Front Operated Power Back Gauge With Direct Reading Dial & Positive Lock
10' Squaring Arm
Electric Foot Switch
Variable Rake Control
Stroke Length Control
Key Selector Switch For
S.S. Multi Stroke
Pushbuttons For Start-Stop
Blade Clearance Adjustment
Extra Set Of Blades
(4) T-Slots In Top Of Bed
T-Slot In Front Of Bed
1/4 HP 220/380/50 Back Gauge Motor
Hydraulic Power Unit Driven By
7-1/2 HP 1430 RPM 220/380/440/50 Cycle Motor |
|
| Ad # 14077 | Power Squaring Shear (Hydraulic) |
| 1958 |
pullmax |
P-9 |
Good |
sold |
Photo /
More Info. |
| pullmax :nibbler-circle shear: Pullmax Universal Shearing & Forming Machine
Model#: P-9
S/N: 58753
Specifications:
Throat depth: 48"
Cutting from edge: max 3/4" width strip x 1/4" thick
Slot cutting: 10 gauge
Beading: 5/32"
Joggling: 5/32"
Louvring: 14 gauge
Doming (dishing): 5/32"
Flanging: 12 gauge
Edge bending: 45 degrees x 12 gauge
Edge bending 90 degrees x 5/32" thick
Punching capacities in Mild Steel:
1-3/16" Diameter in 14 gauge
Niblling: 3/16"
Cutting speed with manual feed: 20 FPM
Cuts per minute: 2000
Motor: 5 Hp, 220/440 Volt, 3 ph, 60 Hz
Approximate dimensions: 98" x 42" x 74" high
Approximate weight: 5,840 lbs. |
|
| Ad # 6919 | Power Squaring Shear (Hydraulic) |
| — |
Whitney-Jensen |
5212 |
Good |
sold |
Photo /
More Info. |
| 52 inch x 12 Gas. Hyd. Shear: WHITNEY JENSEN Model 5212
Material Capacity......................12 Gauge Mild Steel
Width Capacity.........................52"
Strokes Per Minute.....................76
EQUIPPED WITH
2 HP Motor, 1800 RPM
Foot Pedal Trip
24" Rear Operated Manual Back Gauge
Push Button Controls
Approximate Weight.....................3000 Lbs.
Mechanical Back Stop |
|
| Ad # 15106 | Power Squaring Shear (Hydraulic) |
| — |
Guifil |
GH325 |
Good |
sold |
Photo /
More Info. |
| 10ga x 8ft hyd . shear : Guifil # GH325 Hyd. Shear
capacity:10ga=1/8" mild steel or 16 ga stainless
8ft bed length
steel
front support arms
squaring arm
cut length: 8ft
foot pedal actuation
Rake angle........... 1.7 degrees
Strokes per min. ..... 44 SPM
Back gauge travel..... 19.5”
Motor HP ......... 5hp
Weight.... 5,200 LBS |
|
| Ad # 11277 | Power Squaring Shear (Hydraulic) |
| 1964 |
Pacific |
250-HD |
Good |
sold |
No Photo /
More Info. |
| Pacific 250-HD 3/8" by 12ft 32Ton: Model 250-HD
3/8" by 12ft
32Ton? |
|
| Ad # 8302 | Power Squaring Shear (Hydraulic) |
| — |
Promecam |
GH1230A |
Good |
Sold |
Photo /
More Info. |
| 10ft x 1/2in PROMECAM HYDRAULIC SHEAR with FO Power Back Gauge: 10 FT. X 1/2" PROMECAM HYDRAULIC SHEAR
Capacity:10' x 1/2" Mild steel
3' x 5/8" Mild steel
(Center of shear)
Length of knives:122"
Distance between housings:125"
Gap:20"
Holddowns:16
Rake angle:1/32"-3/8"
Floor to top of bed:35-1/2"
S.P.M. Approx.:14-54
EQUIPPED WITH:
36" Front operated power back gauge with control & readout
Electric foot switch
Selector switch for power-off-on &
emergency stop button
Blade clearance & rake adjustment control
Pushbutton for fine adjustment
Selector switch for
continuous-single stroke
Stroke selector control & stroke
counter
Transfer balls in top of table
Knife & holddown guard
Rear parts chute
1 HP 3420 RPM 220/440/3/60
Back gauge motor
30 HP 1755 RPM 220/440/3/60
Main motor |
|
| Ad # 9557 | Power Squaring Shear (Hydraulic) |
| — |
PEXTO |
137-L |
Good |
sold |
Photo /
More Info. |
| 16 Soft Steel: PEXTO 3' Hydraulic Shear Model #137-L Serial #9/74 Power Requirements: 230/... |
|
| Ad # 7121 | Power Squaring Shear (Hydraulic) |
| 1997 |
Baykal/Barcorp |
HGL-3100/8 |
Good |
sold |
Photo /
More Info. |
| 10' x 8mm (5/16") Hydraulic Shear w 34" Powered Back Gauge : Cut Length: 10'
Capacity: Mild Steel 8 mm (0.320"/5/16")
Strokes per Min: 8 spm
Electrical Powered Back Gauge w/display:approx 34"
front support arms
4ft squaring arm
Blades in very good condition
Machine is wired 600vac but has transformer to go from 480 to 600
|
|
| Ad # 12313 | Power Squaring Shear (Hydraulic) |
| 1997 |
Adira |
GHS 0630 |
Good |
sold |
Photo /
More Info. |
| 1/4 x 10 ft: Adira A Dias Rames Shear
1/4" x 10ft
220/440 wired 440
3 Foot Squaring Arm
Mechinical 36" Back Guage
|
|
| Ad # 13717 | Power Squaring Shear (Hydraulic) |
| — |
American Hydralic |
1/4" x 10Ft |
Good |
sold |
Photo /
More Info. |
| 10ft 1/4": American Hercules hydraulic plate shear.
1/4" x 10' capacity.
Hydraulic back gauge.
220 or 440 3 phase
5ft Squaring Arm
|
|
| Ad # 8300 | Power Squaring Shear (Hydraulic) |
| — |
Niagara |
IF-10-1/4 |
Good |
Sold |
Photo /
More Info. |
| 10 ft x 1/4in NIAGARA UNDERDRIVEN HYDRAULIC METAL SHEAR: USED 10 FT. X 1/4" NIAGARA HYDRAULIC METAL SHEAR
Underdriven
Capacity:10' x 1/4" Mild Steel
Length of Knives:10' 2-1/2"
Rake Angle:3/8"
Holddowns:13
Speeds Approx.:24 SPM - Full Stroke
60 SPM - Short Stroke
Floor to Top of Bed:32"
EQUIPPED WITH:
36" Front Operated Power Back Gauge
w/Pushbutton Controls & Readout
(2) Stock Support Arms
Key Selector Switch For Single Stroke -
Inch - Continuous
Electric Foot Switch
Pushbuttons For Start - Stop
Stroke Length Control
Pushbutton For Rake Adjustment
Extra Set of Blades
1-Shot Oil Lubrication
(4) Dovetail Slots in Top of Bed
Dovetail Slot in Front of Bed
Hydraulic Pump Driven by
15 HP 1800 RPM 230/460/3/60 Motor
extra blades included
|
|
| Ad # 16128 | Power Squaring Shear (Hydraulic) |
| 1997 |
ATLANTIC |
HDE 10.1/4 |
Good |
sold |
Photo /
More Info. |
| 10' x 1/4" Mild Steel: 1997 ATLANTIC Model HDE 10'x.250 Hydraulic Shear,
includes: 39" front operated power back gauge,
squaring arm, (3) front support arms, blade gap
adjustment, (18) hydraulic holdldowns, 15 HP motor
(220/440V-3ph), foot pedal operation |
|
| Ad # 15247 | Power Squaring Shear (Hydraulic) |
| ? |
Cincinnati |
century |
Good |
sold |
Photo /
More Info. |
| 12' x 1/2": Cincinnati hyd. shear- century
capacity:12 ft x 1/2", 1/4" stainless
10ft square arm
48" back gage
front support arms
25hp |
|
| Ad # 16079 | Power Squaring Shear (Hydraulic) |
| 1985? |
Niagra |
IF-20-1/4II |
Good |
sold |
Photo /
More Info. |
| 10ft x 1/4": Niagra 10ft x 1/4" hydraulic shear model # IF-10-1/4" II
Capacity 10ft x 1/4"
Stainless steel cap 3/16"
Digital back gage 36" w/counter
Squaring arm 55"
Wired for Voltage wired for 460/3 but looks like has dual voltage transformer in cabinet.
Adj rake angle
Note:rigging /loading fee $850.00
|
|
| Ad # 13740 | Power Squaring Shear (Hydraulic) |
| 1983 |
PullMax |
GSA 430 |
Good |
sold |
Photo /
More Info. |
| 1/2" x 10ft: PullMax GSA 430
capacity(max):1/2" x 10ft
3ft Squaring Arm
36" back gauage/swing away
blades sharp-ready to go
30HP motor
used to cut 12ga, & 1/4" steel mainly
manuals
rigging/loading:$1500.00
|
|
| Ad # 13536 | Power Squaring Shear (Hydraulic) |
| 1997 |
LVD |
JS-C 25/10 |
Good |
sold |
Photo /
More Info. |
| 1/2" x 10' Cap: 10' Shear 1/2" x 10' Cap, 230v, 3PH with Squaring Arm & Elgo Controls |
|
| Ad # 11582 | Power Squaring Shear (Hydraulic) |
| 1998 |
Betenbender |
8-10GA |
Good |
sold |
Photo /
More Info. |
| 8ft x 10ga (1/8") hyd.: ** MADE IN THE U.S.A. **
BETENBENDER HYDRAULIC SHEAR QUOTE
Model 8-125, 8-10ga
8' x 10 Ga.(mild steel) 1/8"
Have Manual
Note: Can be easily upgraded to a (3/16" capacity) for additional $1750.00
SPECIFICATIONS:
Capacity - A-36 Mild Steel (80,000 lb. tensile) 10Ga.
304 Stainless Steel(At Highest Rake) 10 Ga.
Main Motor (H.P.) ............................ 10
Nominal Cutting Length ........................ 100 inches
Number of Holddowns ........................... 15
Knives (Four(4) Cutting Edges) ......... 100"x1"x3"
Rake of Moving Blade (per foot) ......... 1/4
Back Gauge Range 36 inches
Strokes Per Minute ............................ 32
Oil Reservoir (Hydraulic Oil Included) 42 Gallons
Shipping Weight ..................... 7,000 lbs.
Machine Dimensions:
Overall Height ................. 55 inches
Overall Length ................. 121 inches
Overall Width .................. 74 inches(Including Back-gauge)
Electrical Requirements ........ 230V-28amp
Recommended Power Line...... 230V-8ga
BED - Steel one piece box section, stress relieved; welded to side frame insures positive alignment of bed and housings with beam supports that have removable wear tops which allow (1) convenient change to solid top and (2) plates with pin gauging.
RAM - Steel, stress relieved. Truss rod construction assures blade parallelism without consuming, short span adjustments.
POWER RAKE - allows change of blade rake angle for minimum camber & twist.
HYDRO-MECHANICAL HOLDDOWN - firmly grips material to prevent movement and
tipping. Optional urethane gripping pad protects soft and polished materials from marking.
NON-METALLIC GIBS - provides long service life and allow minimum running clearance for accurate control of blade clearance setting.
FOOTSWITCH CONTROL - is activated from a fully shrouded portable footswitch operating on 120 volts.
DRIVE - two hydraulic cylinders pushing or pulling directly on cross-head, no rotating pin action saving on wear.
HYDRAULIC VALVES - in manifold block for a minimum of fitting and piping; "C" frame motor for precision alignment of pump.
STANDARD EQUIPMENT
36" Power Backgauge Hour Meter
With L.E.D Readout
48" Squaring Arm With Inlaid Scale
NEMA Electrics Light Beam/Shadow Line
All Hydraulic Fluid Included All Steel Construction
American Made Motor Disconnect Switch
Hydraulic Self-Compensating
1” x 3” Knives - (4) Cutting Edges
Holddown Bar Assembly
Disconnect Switch
Power Adjust Variable Rake
Manual Swing-Up Backgauge
neoprene hold down caps
|
|
| Ad # 16139 | Power Squaring Shear (Hydraulic) |
| 2000 |
Accurshear |
625010 |
Good |
sold |
Photo /
More Info. |
| 10ft x 1/4": 2000 Accurshear #625010:
capacity
10ft x 1/4" capacity
6ft squaring arm
programmable power back gage w/display
Note:front support arms shown not included. |
|
| Ad # 15005 | Power Squaring Shear (Hydraulic) |
| 1980's |
Cincinnati |
Series 5000 x 12 |
Good |
sold |
Photo /
More Info. |
| 1/2" mild steel x 12ft: Cincinnati Shear: 12ft x 1/2"
Series 5000 x 12
Cap. 1/2" mild steel
Note: std mfg specs below-please verify actual machines
Front & rear gages
CNC controlled
Max. cutting length: 147"
48" Programmable Power swing up back gauge
Power blade clearance
144" Programmable squaring arm
57" Programmable powered CNC front gauge
Programmable rake angle
Main Motor: 50 HP
Front gage - 57"
Back gage - 48"
Approx. weight 28,600#
Wired for 240V 3 phase
Manufactured in the late 80's
Can see in operation |
|
| Ad # 5878 | Power Squaring Shear (Hydraulic) |
| 1965 |
CINCINNATI |
6G12 |
Good |
Sold |
Photo /
More Info. |
| 3/4" x 12' CINCINNATI Hydraulic Power Squaring Shear: Cutting Capacity:
Mild Steel:
- 12' x 3/4"
- w/ Increased Rake: 5' x 1"
Overall Length of Knives:147"
Maximum Rake Angle:
- Nominal:1/2" Per Foot
- Increased:3/4" Per Foot
Gap Depth (Throat):18"
Number of Hydraulic Holddowns:13
Speeds:
- Down:88" / Min.
- Up:197" / Min.
Strokes Per Minute (at Full Load):8 SPM
Motor:40 HP 3/60
Depth of Slot Required in Floor:20-1/2"
Equipped With:
48" Front-Operated Powered 2-Speed Back Gauge w/ Readout
12' Squaring Arm
(2) 40" Support Arms
Electric Foot Switch or Dual Palm Button Operation
Manaul Variable Rake Adjustment w/ Indicator
Adjustable Stroke Length w/ Indicator
Ball Transfers in Table
Shadow Light Gauge
Madison-Kipp Automatic Lubrication System
Controls for: Run Cont.; Run Non-Rep.; Inch
Production Counter |
|
| Ad # 15109 | Power Squaring Shear (Hydraulic) |
| 1984? |
National |
NH7225 |
Good |
sold |
Photo /
More Info. |
| 1/4" x 6ft: National Hyd Shear # NH7225
capacity: 6ft x 1/4"mild steel
front sheet support arms-2
•Heavy cast iron body
•Four cutting edge high carbon, high chromium
blades
•Hydraulic holdown
This 6 foot National shear offers steel cutter
heads and tables. Standard with hydraulic rubber
inserted hold downs, quick adjusting back gauge
for direct reading with a positive lock, front arm
extensions, table gauges, heavy duty foot switch
and well lighted work area. You receive a full
three year warranty. The hydraulic unit conforms
to J.I.C. standards featuring simplicity of
design. The National hydraulic system is simple to
maintain with standard replacement parts such as
valves, cylinders, hoses and oil. The National
shear is actuated by a portable shrouded electric
foot switch attached to a long flexible cable so
it may be positioned comfortable to the operator.
National Shears have high carbon, high chromium
blades with four cutting edges of premium quality
tool steel and will withstand nicking and wear
better than relieved blades. National blades are
secured to the shear with tempered flat head
screws through countersunk holes in blades.
Complete cuts of full width pieces are 2 inches
longer than specified cutting length. The high
strength cast iron constructed side frames are
made of the highest tensile strength metal needed
for long life and accurate shearing. Underdrive
construction with downward cylinders and major
hydraulics under the bed gives the shear a low
profile. These shears also include a full 3 year
warranty and 5 year warranty against breakage of
the cutter heads and tables.
•Type: hydraulic
•Mild Steel Capacity: 1/4 inch (6.35mm)
•Stainless Capacity: 1/8 inch (3.1mm)
•Cutting Length (inches): 72
•Cutting Width (inches): 72
•Weight (pounds): 6000
•Dimensions (LxWxH): 84 x 98 x 54
note: sells new for $23,150.00 |
|
| Ad # 10455 | Power Squaring Shear (Hydraulic) |
| 1972 |
Cincinnati |
5FL12 |
Good |
sold |
Photo /
More Info. |
| Cincinnati Model 5FL12, 5/8'' x 12' Hydraulic Squaring Shear : Cincinnati Hydraulic Squaring Shear 5/8" x 12'
MODEL #5FL12 S/N # NEW 1972
EQUIPPED WITH: 48" Front Operated Power Back Gauge10' Squaring Arm(2) Front SupportsAdjustable Rake AngleBall Rollers In TableHydraulic Hold-DownsAutomatic Pressure Lubrication SystemElectric Foot SwitchCATALOGUE SPECIFICATIONS: Shearing Capacity, Nominal.................. 12' x 5/8"Shearing Capacity, Maximum.................. 12' x 3/4"Length Between Housings..................... 12'3"Nominal Rake, Angle......................... 1/2"Increased Rake, Angle....................... 3/4"Throat Depth................................ 18"Total Hold-Down Pressure.................... 41 TON Ram Speed, Full LoadDown................... 135 IPM Ram Speed,Return........................... 290 IPM Strokes Per Minute @ FullLength............ 12 SPM Strokes Per Minute @ 24" Length.............33 SPM Motor, Horsepower........................... 40 HP OverallDimensions, L x W.................. 15'x7'Overall Height.............................. 10'Weight Approximately........................ 53000 LBSNOTE: Machine Appears To Be In Very Good Condition. From Precision Naval Facility. |
|
| Ad # 15987 | Power Squaring Shear (Hydraulic) |
| 1971 |
Pacific |
375R20 |
Good |
sold |
Photo /
More Info. |
| 3/8" Mild Steel x 240" Long: Pacific #375R20 3/8 × 240" hydraulic shear
Unit is currently under power and in good working
condition. It has a operating back gauge,
operating back table and 14' squaring arm.
According to our documents we purchased in 1975
and still use it today. |
|
| Ad # 13213 | Power Squaring Shear (Hydraulic) |
| 1987? |
Tru-Fab |
S-1048 |
Good |
Sold |
Photo /
More Info. |
| 10ga x 4ft capacity: Tru-Fab Hyd. Shear # S-1048
10ga or 1/8"mild steel
4ft cutting length
26" power back gage w/ mechanical display
foot pedal operation
manual |
|
| Ad # 8888 | Power Squaring Shear (Hydraulic) |
| 1980's |
Pearson |
1018TX |
Good |
sold |
Photo /
More Info. |
| 12 Gauge x 10' capacity: Rated capacity 12GA x 10'
Rated Capacity Stainless 12 GA
Swing Beam Design
Low Profile Machine
All Steel Frame
Strokes Per Min 25
Adjusta Stroke Control
Hydraulic Holdowns 11
Equipped With:
39" Squaring Arm
2 Front Support Arms
30" front Opperated Power Back Gauge
7 1/2 HP 220/440 Volts 3 Phase
With Remote Foot Treadle
|
|
| Ad # 8292 | Power Squaring Shear (Hydraulic) |
| 74? |
Pexto |
PH52 |
Good |
Sold |
Photo /
More Info. |
| 52in x 16 GA. PEXTO HYDRAULIC METAL SHEAR: 52" X 16 GA. PEXTO HYDRAULIC METAL SHEAR
Capacities:52" x 16 Ga. Mild Steel
52" x 20 Ga. Stainless Steel
Length of Knives: 53.5"
Oil Reservoir Capacity:5 Gallons
Floor to Top of Bed:32"
S.P.M. Approx.:45 @ Full Length
100 @ 1/4 Length
EQUIPPED WITH:
Electric Foot Switch
(2) Stock Support Arms
Pushbuttons For Start - Stop
Stroke Length Adjustment
(2) T-Slots in Top of Bed
Vickers Hydraulic Pump
Driven by 3 HP 1755 RPM
230/460/3/60 Motor
|
|
| Ad # 15303 | Power Squaring Shear (Hydraulic) |
| — |
Wysong |
1072 |
Good |
sold |
Photo /
More Info. |
| 72"(6ft) x 16ga: Item: Wysong Power Sheer
Model No: 1072
Size: 72” x 16ga mild steel,20ga stainless
Features:
- 10ga max materials thickness
- 6 foot wide capacity
- Adjustable back stop
Issues:
- Nothing out of the ordinary for an older
piece of equipment. Definitely good for
thicker gauge materials. Thinner might need
some blade gap adjustment.
|
|
| Ad # 14735 | Power Squaring Shear (Hydraulic) |
| 1980? |
Allsteel |
14' x 3/8" |
Good |
sold |
Photo /
More Info. |
| 14ft bed x 3/8" steel or 1/4" stainless: Allsteel Hyd. Shear 3/8-14
Capacity:14ft bed x 3/8" mild steel or 1/4"
stainless steel
40 HP motor
dual squaring arms 6ft & 4'
36" power back gage w/ mechanical display
electric foot switch
new bladed recently insalled spare set
included
but need sharpened
includes: roller sheet support table shown:
5'
x
10ft
|
|
| Ad # 14697 | Power Squaring Shear (Hydraulic) |
| 2001 |
Wysong |
H 25 12 |
Good |
sold |
Photo /
More Info. |
| 1/4" x 12 ft: Wysong
Model H 25 12
1/4" x 12ft
12ft Squaring arm
Yr 2001
36" CNC Backguage
208 volts
New blades installed recently
Blade Gap Adjustment
|
|
| Ad # 13479 | Power Squaring Shear (Hydraulic) |
| — |
Wysong |
14ga 52" |
Good |
sold |
Photo /
More Info. |
| Wysong 14ga 52" Electric/Hydraulic Power Shear: Wysong 14ga-52" electric/hydraulic power shear.
Works great
Used daily.
Blades still have 2 new edges.
Capacity is 14 gage 52" long. 2 hp motor
Phase converter for an additional cost of
$500.
230 460 3 Phase
Under power yes |
|
| Ad # 12566 | Power Squaring Shear (Hydraulic) |
| 1992 |
Betenbender |
12-375 |
Good |
Sold |
Photo /
More Info. |
| 3/8" X 12' : Betenbender Hyd. Shear
12ft x 3/8" mild steel
1/4" SS capacity
4ft Squaring arm
front support arms
36" power back gage
This Betenbender was recently purchased from an
air force base that is no longer operational. Machine
is in excellent working condition and is up to
standards. This particular machinery has not been
used for mass production. Also includes foot control
pedal, table, back gauge and squaring.
MACHINE SOLD AS IS.
Buyer is responsible for all shipping/loading costs
and arrangements.
|
|
| Ad # 5137 | Power Squaring Shear (Hydraulic) |
| — |
Amada |
2532 |
Good |
Sold |
Photo /
More Info. |
| Quality 8' x 16Ga. Hydraulic Shear: 8' capacaity x 11Ga. =1/8" mild steel
Hyd. operation
Digtal display length on power backgage.
front arm supports
Squaring arm
foot pedal. |
|
| Ad # 14106 | Power Squaring Shear (Hydraulic) |
| — |
Summit |
10 x 1/4 |
Good |
sold |
Photo /
More Info. |
| 10ft x 1/4": Summit Shear
10Ft x 1/4"
rigging/loading fee $1500.00
|
|
| Ad # 8885 | Power Squaring Shear (Hydraulic) |
| 1984 |
Cincinnati |
500-12 |
Good |
sold |
Photo /
More Info. |
| 1/2" Mild Steel: Capacity, Mild Steel 1/2"
Stainless Steel 3/8"
Length 12'
Motor 25HP
Equipped With Cincinnati Conveyor
Seperator
Stacker
|
|
| Ad # 14332 | Power Squaring Shear (Hydraulic) |
| 2004 |
Yangli Group |
QC12Y-6.35x2000 |
Good |
sold |
Photo /
More Info. |
| capacity:78" x 1/4": 2004 Yangli Group
capacity:78" x 1/4"
gap adj dial on side for thin mtl
Hydraulic swing beam shear
Model# QC12Y-6.35X2000
220V/3
Max cutting thickness ¼”
78” cutting width
6ft squaring arm
2 sheet support arms
Shear is in good working order, easy guide
adjustable blade gap for easy fast adjustments,
digital read out back gage, and comes with 3
removable squaring arms |
|
| Ad # 15247 | Power Squaring Shear (Hydraulic) |
| ? |
Cincinnati |
century |
Good |
sold |
Photo /
More Info. |
| 12' x 1/2": Cincinnati hyd. shear- century
capacity:12 ft x 1/2", 1/4" stainless
10ft square arm
48" back gage
front support arms
25hp |
|
| Ad # 8294 | Power Squaring Shear (Hydraulic) |
| 1990 |
Betenbender |
6-125 |
Good |
Sold |
Photo /
More Info. |
| 10 Ga. x 6 Ft. BetenbenderHydraulic Shear: 6 FT. X 10 GA. BETENBENDER HYDRAULIC POWER SHEAR
Capacity:6' x 10 Ga. Mild Steel
Length of Knives;76"
Rake Angle:1/4"
S.P.M. Approx.:35
EQUIPPED WITH:36" Front Operated Power Back Gauge
w/Control For Forward-Reverse-
High-Low & Micrometer Readout
Palm Button For Shear
Selector Switch For Run-Jog
Power Rake Angle Adjustment With
Control For Up-Down
Hydraulic Holddown Bar
Push-Pull Button For Start-Stop
Rear Parts Chute
Hydraulic Pump
Driven by 10 HP 1725 RPM
208/230/460/3/60 Motor
|
|
| Ad # 4995 | Power Squaring Shear (Hydraulic) |
| 1977 |
Cincinnati |
#5FL12 Hydraulic |
Good |
sold |
Photo /
More Info. |
| 10' CINCINNATI Hydraulic Shear: 48" Front Operated Power Back Gauge
Ball Transfers in Table
10'capacity
Squaring Arm
Free Standing Ball Transfers in Front (Not
Included) |
|
| Ad # 7688 | Power Squaring Shear (Hydraulic) |
| 1988 |
ALLSTEEL |
3/8-10 |
Good |
SOLD |
Photo /
More Info. |
| 10' X 3/8´´ ALLSTEEL HYDRAULIC POWER SQUARING SHEAR: 10' X 3/8´´ ALLSTEEL HYDRAULIC POWER SQUARING SHEAR
CAPACITY ........................... 3/8´´ MILD STEEL
OVERALL LENGTH OF BLADES ........... 122´´
FRONT OPERATED POWER BACK GAUGE .... 48´´
GAP ................................ 15´´
NUMBER OF HYDRAULIC HOLD DOWNS ..... 13
RAKE ANGLE ......................... 7/16´´ PER FOOT
ELECTRIC FOOT TRIP ................. YES
STROKES PER MINUTE ................. 17 FULL STROKE
STROKES PER MINUTE ................. 60 HALF STROKE
AUTOMATIC LUBE ..................... YES
POWER BALL TRANFERS IN TABLE ....... YES
SQUARING ARM ....................... 72´´
FRONT ARM SUPPORTS ................. (2) @ 36´´
FLOOR STANDING ..................... YES
MAIN MOTOR ......................... 40 HORSEPOWER |
|
| Ad # 14978 | Power Squaring Shear (Hydraulic) |
| 1975 |
American Hercules |
G28654 |
Good |
sold |
Photo /
More Info. |
| 8ft x 1/4" capacity: American Hercules hydraulic shear #G28654
8ft x 1/4" capacity
squaring arm
25HP motor
manual blade gap adjustment
front support arms
power back gage 36" |
|
| Ad # 13213 | Power Squaring Shear (Hydraulic) |
| 1987? |
Tru-Fab |
S-1048 |
Good |
Sold |
Photo /
More Info. |
| 10ga x 4ft capacity: Tru-Fab Hyd. Shear # S-1048
10ga or 1/8"mild steel
4ft cutting length
26" power back gage w/ mechanical display
foot pedal operation
manual |
|
| Ad # 13453 | Power Squaring Shear (Hydraulic) |
| 1973 |
Promecam |
GH630A |
Good |
sold |
Photo /
More Info. |
| 10ft x 1/4": used Promecam hydraulic shear 10ft x 1/4"
model # GH630A
Front Operated Power Back Gauge W/ Indicator, Square Arm, Power Rake and stroke Control, Auto Lube System
Used Promecam Hydraulic Power Shear-
cutting thickness 6mm or 1/4"
cut length 10ft..w/open ended type bed design
power back gage 35"
squaring arm 40:
front supports-shown
rollers in table
electric foot pedal operation
Long Stroke: 17
Max. Cutting Length: 122"
Rake Angle: 1/8" - 11/32"
Capacity (mild steel): 1/4"
Gap: 2 1/2"
Number of Hold Downs (Hydraulic): 15
Back Gauge Range: 36"
Strokes Per Minute:
Short Stroke: 47
Horsepower: 12
3 sets of spare blades included
votage 460/3
rigging/loading fee adder: $1000.00
Dimensions (L x D x H): 130" x 84" x 70"
Weight: 14,700 LBS
|
|
| Ad # 14223 | Power Squaring Shear (Hydraulic) |
| ? |
Hydra Tool Company |
HTC: 250-12SR |
Good |
sold |
Photo /
More Info. |
| 1/4" x 12 ft.: Hydra Tool Hyrdraulic Shear
Model: HTC 250-12SR
Capacity: 1/4" x 12 ft
Cutting capacity:1/4"
Overall Cutting Length:12'
Length of Knives:144"
Speeds Approx:207 IPM Down
Speeds Approx:276 IPM Up |
|
| Ad # 15236 | Power Squaring Shear (Hydraulic) |
| 2013 ref |
Beyeler |
C3750 x 8 |
Good |
sold |
Photo /
More Info. |
| 12ft x 5/16": Beyeler #C3750 x 8 Hydraulic Shear
has been refurbished,gone thru well in 2012:electrically & mechanically
Capacity: 12'-3"(147.5"max)(3750mm) x 5/16"(8mm) mild steel
spare blade included
blade gap adjustment for thinner or thick material
5-front support arms-some shown
foot pedal
built in ball table rollers
light curtain on back side area
programmable back gage with inch/metric display
Note:refurbished in 2012 in switzerland -electrically & mechanically-looks new inside and out
Rigging/Loading fee $1750.00
|
|
current group
groups previously viewed
groups not yet viewed
