Home   |   Contact Us   |   About Us   |   Email NetMachinery  |   Tel: 704-904-9123


Home > NetMachinery Equipment Listings

User Search

Your search results (if any) appear below in groups of 75 for each section.

CNC Lathes & Turning Centers

We found 1 matching ad. Now displaying the final ad.

FOR SALE: Year - 1998 Make - CNC Enhancements Model - AB-400
Mouseover Thumbnails to Enlarge


Price: $2795.00 reduced USD   
Category: CNC Lathe Part & Accessories
Capacity: bar feeder :1/4"-4"

Ad # 13786

Add/Remove from Checklist
Year: 1998
Make: CNC Enhancements
Model: AB-400
Condition: Excellent
Electrical: 230/3Phase

Machine Status:Not Under Power
Shipping Info:We can load
Weight:1,500 lbs
Dimension: L x W x H92" x 65" x 81"

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$2795.00 reduced USD


Click Here to Print Quote

Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item   

General Description
  • CNC Enhancements
    Model: Autobar 400
    Was on mori seiki SL200
    Round Bar Diameter Capacity .. 1/4" to 4" Range
    Maximum Feed Length For Bars.. 60"
    Height Floor to Feed Guide (Adjustable 28" - 55"
    Barstock Shape.. Round or Hex
    Material Tray Capacity w/ 1" Bars.. 42 Bars
    Material Tray Capacity w/ 4" Bars..10 Bars


Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 41397 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00220140-NA


1800-2000

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

Manual Lathes

We found 3 matching ads. Now displaying the remaining 3 ads.

FOR SALE: Year - 1950's Make - Bullard Model - 42"
Mouseover Thumbnails to Enlarge


Price: $7,950 reduced USD   
Category: Vertical Turret Lathe (VTL)
Capacity: 42" 3 jaw chuck

Ad # 15399

Add/Remove from Checklist
Year: 1950's
Make: Bullard
Model: 42"
Condition: Good
Electrical: 230/3Phase

Machine Status:Under Power
Shipping Info:We can load
Weight:20,000 lbs
Dimension: L x W x H9'x9'x9'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$7,950 reduced USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • Vertical Turret Lathe
    Make: Bullard (Spiral Drive)
    Model: 42"
    Electrical: 220/3 phase
    Table Size: 42"
    Max Swing: 44"
    Height Under Cross Rail: 33"
    Height Under Turret Face: 43-1/2"
    Table Speeds: (12) 4.1 to 70 RPM
    Vertical Head Movement: 27"
    Vertical Head Will Face: 44"
    Vertical Movement Of Side Head: 25"
    Horizontal Movement Of Side Head: 21"
    30 HP Drive Motor
    42" 3-Jaw Chuck

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 34326 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00120170-NA


6,000

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - ? Make - Acra Model - ATS-27EVS
Mouseover Thumbnails to Enlarge


Price: $3995.00reduced USD   
Category: Second Operation
Capacity: 9" Swing x 36" length of bed

Ad # 14350

Add/Remove from Checklist
Year: ?
Make: Acra
Model: ATS-27EVS
Condition: Fair
Electrical: 460/3Phase

Machine Status:Can be powered up
Shipping Info:We can load
Weight:1000 lbs
Dimension: L x W x H70" x 32" x 55"

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$3995.00reduced USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • Secondary Op Lathe
    Make: ACRA
    Model: ATS-27EVS
    Capacity: 9" Swing x 36" length of bed

    The Spindle Is Mounted In High Precision
    Preloaded Angular Contact Ball Bearings
    Eliminating Radial And End Play

    Fast Lever Collet Chucking With A Single
    Movement

    Variable Spindle Speeds 0~4000 RPM
    Double Tool Cross Slide For Many Practical
    Applications

    Solid Hardened And Ground Alloy Tool Steel
    Bed

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 39330 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


01020140-NA


3,500

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - ? Make - John Lang & Sons Model -
Mouseover Thumbnails to Enlarge


Price: $4995.00 USD   
Category: General Purpose Lathe 15in. to 23in. swing
Capacity: 18" Swing x 8'

Ad # 14111

Add/Remove from Checklist
Year: ?
Make: John Lang & Sons
Model:
Condition: Good
Electrical: 230/3Phase

Machine Status:Under Power
Shipping Info:We can load
Weight:5,000 lbs
Dimension: L x W x H

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$4995.00 USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • John Lang & Sons of Johnstone, Scotland engine
    lathe
    Capacity: 18" Swing x 8' between centers
    spindle speeds 25-500.
    Standard and metric threads.
    2" through spindle hole,
    taper attachment,
    three jaw and four jaw chucks and face
    plate. D1-6 nose.
    steady rest & follow rest included

    Power is 3 phase motor running a hydraulic
    head

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 42957 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00620140-NA


4,000

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

CNC Mills & Machining Centers

We found 2 matching ads. Now displaying the remaining 2 ads.

FOR SALE: Year - 1996 Make - Mighty Viper Model - 2100 HV-80S
Mouseover Thumbnails to Enlarge


Price: $27,995.00 reduced USD   
Category: Vertical Machining Centers (VMC)
Capacity: X - 81" Y - 41.3" Z - 32.2" travels

Ad # 15478

Add/Remove from Checklist
Year: 1996
Make: Mighty Viper
Model: 2100 HV-80S
Condition: Good
Electrical: 230/3Phase

Machine Status:Under Power
Shipping Info:Rigging Fee Extra
Weight:53,000 lbs
Dimension: L x W x H220″ x 182″ x 110″

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$27,995.00 reduced USD


Click Here to Print Quote

Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item   

General Description
  • Vertical Machining Center
    Make: Mighty Viper
    Model: 2100 HV-80S
    travels: X- 81" Y-41.3 Z-32.2"
    Electrical: 220/3 phase

    Spindle Nose to Table (Min.- Max.): 4.9″ –
    36.5″
    Spindle Center to Column: 41″
    Table:
    Length: 83″
    Width: 41.3″
    Max Weight on Table: 6600 lbs
    Spindle:
    Taper Size: 50
    Speed Range: 60 – 6000 RPM
    Spindle Power: 25 HP
    Feed rates:
    Rapid X,Y & Z: 590 inch/P.M
    Cutting Feedrate: .04″ – 276″ inch/ P.M

    Automatic Tool Changer:
    50 Taper
    Capacity: 32
    Max Tool Weight: 33 lbs
    Max Tool Length: 12″
    Max Tool Dia.: 5″

    General:
    Air Required: 100 psi, 4 scfm
    Power: 205-235v / 66FLA / 3-Phase, 40 Kva

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 31766 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00320170-NA


25-30k

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - 1998 Make - Okuma Model - Cadet Mate
Mouseover Thumbnails to Enlarge


Price: $12,750 USD   
Category: Vertical Machining Centers (VMC)
Capacity: Axis Travels: X 40" Y 20" Z 20" Table: 47.2" x 20"

Ad # 15433

Add/Remove from Checklist
Year: 1998
Make: Okuma
Model: Cadet Mate
Condition: Needs Work
Electrical: 230/3Phase

Machine Status:Under Power
Shipping Info:Rigging Fee Extra
Weight:8,000 lbs
Dimension: L x W x H10'x7'x9'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$12,750 USD


Click Here to Print Quote

Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item   

General Description
  • Vertical Machining Center
    Make:Okuma
    Model: Cadet Mate
    Electircal: 220/3 phase

    X-Axis Travel:40"
    Y-Axis Travel:20"
    Z-Axis Travel:20"
    Table Size:47.2" x 20"
    Load Capacity:700 Lbs
    Table Surface to Floor Travel:31.9"
    Spindle End to Table Surface:7.87" - 27.87"
    Spindle Center to Column Boxway: 20.08"
    Spindle Tapered Bore:NT #40
    Spindle Diameter at Front Bearing: 2.75"
    Spindle Speed Range:40-8000 RPM
    Rapid Traverse Rate:591 IPM
    Cutting Feed Rate (X,Y,Z-Axis):157.5 IPM
    Tool Magazine Capacity:20-ATC
    Tool Selection:Fixed Address
    Tool Shank Type:CAT V-Flange
    Max. Tool Dia. w/ Adjacent Tools: 3.54"
    Max. Tool Dia. w/o Adjacent Tools: 6.3"
    Max Tool Length: 11.8"
    Max. Tool Weight: 17 Lbs

    Machine is in process of getting spindle replaced

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 32795 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00220170-NA


10,000.00

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

Manual Milling Machines

We found 1 matching ad. Now displaying the final ad.

FOR SALE: Year - Make - Kearney & Trecker Model -
Mouseover Thumbnails to Enlarge


Price: $1795 USD   
Category: Manual Mill, Parts and Accessories
Capacity:

Ad # 15402

Add/Remove from Checklist
Year:
Make: Kearney & Trecker
Model:
Condition: Excellent

Machine Status:
Shipping Info:
Weight:
Dimension: L x W x H

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$1795 USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • Various Tooling for Boring Mill
    Fits: Kearney & Trecker Mills

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 30944 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00120170-NA


1,500

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

Drilling, Tapping & Threading

We found 2 matching ads. Now displaying the remaining 2 ads.

FOR SALE: Year - 1950's Make - American Model - 3-12
Mouseover Thumbnails to Enlarge


Price: $3250.00 USD   
Category: Radial Drill Press
Capacity: 3ft. arm, 12" diameter column

Ad # 15406

Add/Remove from Checklist
Year: 1950's
Make: American
Model: 3-12
Condition: Good
Electrical: 230/460/3 wired 230

Machine Status:Can be powered up
Shipping Info:We can load
Weight:4,000 lbs
Dimension: L x W x H9' x 3' x 8'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$3250.00 USD


Click Here to Print Quote

Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item   

General Description
  • Radial Drill Press
    Make: Chicago Tool Works
    Model: 3ft arm, 12" diameter column
    Electrical: 230/ 3 phase

    Drill is in good working order. Has been
    stored in shop until recently. Removed from
    shop because no longer needed. It is now well
    covered with tarp.

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 31532 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00120170-NA


2,500

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - 1979 Make - Feeler Model - S600B
Mouseover Thumbnails to Enlarge


Price: $1995.00 USD   
Category: Single Spindle Drill Press
Capacity: 12" Throat, table size 16" x 20"

Ad # 13695

Add/Remove from Checklist
Year: 1979
Make: Feeler
Model: S600B
Condition: Good
Electrical: 230/3Phase

Machine Status:Can be powered up
Shipping Info:We can load
Weight:1500 lbs
Dimension: L x W x H25" x 28" x 7'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$1995.00 USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • Feeler Gear Head Drilling Machine
    Model: S600B
    Throat: 12"
    Table: 16" x 20"
    RPM: 1460/2920
    Electrical: 220 (3 Phase)
    HP: 2 / 1.5
    AMP: 4.5

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 31532 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


01120130-NA


1500

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

Sawing Equipment

We found 2 matching ads. Now displaying the remaining 2 ads.

FOR SALE: Year - 1987 Make - Soco Model - MC - 350NFA
Mouseover Thumbnails to Enlarge


Price: $3,995 reduced USD   
Category: Cold Saws & Power Hack Saws
Capacity: 14" Saw blade Diameter-non ferrous type

Ad # 13787

Add/Remove from Checklist
Year: 1987
Make: Soco
Model: MC - 350NFA
Condition: Fair
Electrical: 230/3Phase

Machine Status:Not Under Power
Shipping Info:We can load
Weight:10,000 lbs
Dimension: L x W x H75" x 60" x 68"

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$3,995 reduced USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • Soco Cold Saw
    Model: MC - 350NFA
    non ferrous type-alum brass, ect..
    Capacity:
    Solid round:4-1/4”
    Solid square:4”
    Round tubing:4-1/4”
    Rectangle tubing:5” x 3”
    Square tubing:4-1/4”
    Motor:5 HP, 1,730 RPM, 220 volt, 3 ph
    Coolant system:Uni Spray Mist
    Bar Feed Stroke:Ό” – 27” (x2 = 54”)
    Maximum Saw Blade diameter:14”
    ran when taken out of service


Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 40852 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00220140-NA


?offer

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - 1992 Make - Scotchman Model - Bewo CPO 250
Mouseover Thumbnails to Enlarge


Price: $sold USD   
Category: Cold Saws & Power Hack Saws
Capacity: 10" Blade

Ad # 13785

Add/Remove from Checklist
Year: 1992
Make: Scotchman
Model: Bewo CPO 250
Condition: Good
Electrical: 230/460/3 wired 230

Machine Status:Not Under Power
Shipping Info:We can load
Weight:1000 lbs
Dimension: L x W x H24" x 31" x 70"

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$sold USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • 10" (250 MM) BLADE CAPACITY
    MANUAL CLAMP FOR MATERIAL VISE
    MITER LOCKING DEVISE, STOPS AT 45*
    LEFT, 90* STRAIGHT AND 45* RIGHT
    Scotchman CP0 250 Cold Saw
    ROUND CAPACITY 3-3/8"
    45 DEGREE CAPACITY 2-1/2"
    SQUARE CAPACITY 3" x 3"
    RECTANGLE CAPACITY 3-1/2"x 2-3/8"
    2 SPEED 60/120 RPM

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 43969 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00220140-NA


1200

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

Grinding Machinery

We found 1 matching ad. Now displaying the final ad.

FOR SALE: Year - ? Make - AMW Model - GSG-1020AH
Mouseover Thumbnails to Enlarge


Price: $3,995.00 USD   
Category: Surface Grinders
Capacity: Table size - 10"x20"

Ad # 13783

Add/Remove from Checklist
Year: ?
Make: AMW
Model: GSG-1020AH
Condition: Good
Electrical: 230/460/3 wired 230

Machine Status:Not Under Power
Shipping Info:We can load
Weight:3,500 lbs
Dimension: L x W x H6'X5'X6'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$3,995.00 USD


Click Here to Print Quote

Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item   

General Description
  • AMW Surface Grinder
    Model: GSG-1020AH
    2 axis auto left right--in out, manual z
    downfeed
    Electrical: 230/460/3 Phase wired 230
    Rated Capacity, 22" Longitudinal Table Travel,
    11-1/2" Cross Table Travel, 19-1/2" From
    Spindle Center to Table
    ran when taken out of service...

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 40149 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00220140-NA


2000K offer

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

Power Squaring Plate Shears

We found 2 matching ads. Now displaying the remaining 2 ads.

FOR SALE: Year - ? Make - American Hercules Model - 6' x 1/4"
Mouseover Thumbnails to Enlarge


Price: $7,995.00 reduced USD   
Category: Power Squaring Shear (Hydraulic)
Capacity: 6ft. x 1/4" mild steel

Ad # 14382

Add/Remove from Checklist
Year: ?
Make: American Hercules
Model: 6' x 1/4"
Condition: Good
Electrical: 230/3Phase

Machine Status:Can be powered up
Shipping Info:Rigging Fee Extra
Weight:7,000
Dimension: L x W x H10'x 9'x 7'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$7,995.00 reduced USD


Click Here to Print Quote

Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item   

General Description
  • Hydraulic Power Shear
    Make: American Hercules
    Capacity: 6ft. x 1/4" mild steel
    Electrical: 230/3 phase
    Manual backgauge

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 39528 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


01020140-NA


5,500

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - Make - Cincinnati Model - 1408
Mouseover Thumbnails to Enlarge


Price: $sold USD   
Category: Power Squaring Shear (Hydraulic)
Capacity: 8ft.x 3/16" Mild Steel

Ad # 15473

Add/Remove from Checklist
Year:
Make: Cincinnati
Model: 1408
Condition: Good
Electrical: 230/460/3 wired 230

Machine Status:Under Power
Shipping Info:Rigging Fee Extra
Weight:14,000 lbs
Dimension: L x W x H11'x10'x7'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$sold USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • Hydraulic Power Squaring Shear
    Make: Cincinnati
    Model: 1408
    Capacity: 8ft.x3/16"

    LENGTH OF KNIVES: 8'4"
    DISTANCE BETWEEN HOUSINGS: 8'3"
    GAP: 18"
    RAKE ANGLE: 1/4"
    HOLDDOWNS: 9
    HOLDDOWN TO KNIFE EDGE: 5/8"
    DISTANCE UNDER HOLDDOWNS: 3/8"
    FLOOR TO TOP OF BED: 32"
    S.P.M. APPROX.: 60

    EQUIPED WITH:
    SQUARING ARM
    FULL LENGTH FOOT TREADLE
    AUTOMATIC OIL LUBRICATION
    SPRING COUNTERBALANCES
    (4) DOVETAIL SLOTS IN TOP OF BED D
    5 HP

    *comes with an extra set of blades
    Blades currently on machine have recently been
    sharpened.

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 30913 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00320170-NA


10,000.00

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

Sheetmetal/Pipe/Tube Bending, Shaping, Punching, Ironworkers

We found 21 matching ads. Now displaying the remaining 21 ads.

FOR SALE: Year - 1971 Make - Roper Whitney Model - 68
Mouseover Thumbnails to Enlarge


Price: $995.00 USD   
Category: Hole Punches: Single,Turret and CNC
Capacity: 5 ton x 24" throat

Ad # 15590

Add/Remove from Checklist
Year: 1971
Make: Roper Whitney
Model: 68
Condition: Good

Machine Status:
Shipping Info:We can load
Weight:500
Dimension: L x W x H18"x44"x48"

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$995.00 USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • Roper Whitney Foot Operated Punch
    Capacity: 5 Tons
    Throat: 24"

    We can load and skid

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 31026 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00820170-NA


800

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - 1976 Make - Pexto Model - 298-C
Mouseover Thumbnails to Enlarge


Price: $895.00 USD   
Category: Shears: Sheet Metal
Capacity: 36" throat x 20 gauge

Ad # 15589

Add/Remove from Checklist
Year: 1976
Make: Pexto
Model: 298-C
Condition: Good
Electrical: Manual

Machine Status:
Shipping Info:We can load
Weight:500 lbs
Dimension: L x W x H24"x50"x54"

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$895.00 USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • Pexto Circle Shear (manual)
    Model: 298-C
    Capacity: 36" throat x 20 Gauge

    We can load and skid

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 31641 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00820170-NA


500

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - Make - Whitney Jensen Model - #130
Mouseover Thumbnails to Enlarge


Price: $2495 USD   
Category: Hole Punches: Single,Turret and CNC
Capacity: 10 Ton x 18" Throat

Ad # 15585

Add/Remove from Checklist
Year:
Make: Whitney Jensen
Model: #130
Condition: Good
Electrical: 230/3Phase

Machine Status:Can be powered up
Shipping Info:We can load
Weight:1,000 lbs
Dimension: L x W x H2'x4'x 69"

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$2495 USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • Single Punch:power press
    Make: Whitney-Jensen
    Model: #130 Deep Throat 18"
    Capacity: 10 Ton x 18" Throat
    Electrical: 220/3 phase

    Height of throat 9"
    175 Strokes per min
    Length of stroke 1-1-4"
    Ram adjustment 1 3/4"
    Motor 1 HP
    Punch-die style #8,28,40 rounds,
    Punch hole shank dia in ram:1-9_16"


    Slug clearance 4" round or 3.5 x 6"rec
    Weight of Flywheel 160 lbs.
    tooling:only includes a 7/8 x 7/8" square die/punch
    Weight 1000 lbs


Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 31276 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00820170-NA


800.00

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - ? Make - Chicago Dreis & Krump Model - S-818
Mouseover Thumbnails to Enlarge


Price: $3,250.00 USD   
Category: Brakes: Manual Hand
Capacity: 8ft x 18 Gauge

Ad # 15584

Add/Remove from Checklist
Year: ?
Make: Chicago Dreis & Krump
Model: S-818
Condition: Good

Machine Status:Under Power
Shipping Info:We can load
Weight:1,500 lbs
Dimension: L x W x H10'x3'x5'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$3,250.00 USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • Make: Chicago Dreis & Krump
    Model: 818
    Capacity: 8' x 18 Gauge mild steel
    Maximum bending length: 96"
    Hand operated
    Removable nose bar and angle bar

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 31279 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00820170-NA


3,000

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - 2012 Make - Holem Model - WC67Y 50/2500
Mouseover Thumbnails to Enlarge


Price: $9995.00reduced USD   
Category: Brakes Press: Hydraulic
Capacity: 50 ton x 8ft.

Ad # 15577

Add/Remove from Checklist
Year: 2012
Make: Holem
Model: WC67Y 50/2500
Condition: Needs Work
Electrical: 460/3Phase

Machine Status:Not Under Power
Shipping Info:We can load
Weight:7,500 lbs
Dimension: L x W x H10'x5'x8'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$9995.00reduced USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • Hydraulic Press Brake nc/plc(go to)backgage controller
    Make: Holem
    Model: WC67Y-50/2500
    Capacity: 50 Ton x 8ft.
    Electrical: 460/3 phase
    Year: 2012
    power back gage
    Nominal force(KN)500
    Worktable length(mm)2500
    Distance between holes(mm)1850
    Depth of throat(mm)230
    Slider travel(mm)100
    Max open height(mm)320
    Main power(Kw)5.5
    Powered backgauge
    equipped with multi groove bottom die

    1. The whole machine is made by plate welded
    stress and treated by vibration to remove
    inner stress, to make sure long
    time bending accuracy, rigidity and
    stability.

    2. Hydraulic system is controlled by double
    cylinders, mechanical stopper, torsion bar
    to realize synchronization, machine is
    runningsmoothly and reliably.

    3. Distance of back gauge and stroke of
    slide is adjusted by electrical control and
    fine-tuning manually, and digital display
    device is adopted to make operation more
    frequently.

    4. Upper mold clamping system is equipped
    with deflection compensation system

    Note: As seen in photo of the electrical
    area, a white wire was cut to foot pedal by mistake. This took the machine out of operation. An electrician should be able to correctly
    reconnect wire easily and machine would be in good working order,bought a new unit

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 35121 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00820170-NA


6-7k

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - ? Make - Niagara Model - 510 RC 3/8
Mouseover Thumbnails to Enlarge


Price: $4,995.00 reduced USD   
Category: Shears: Sheet Metal
Capacity: 3/8" mild steel

Ad # 15381

Add/Remove from Checklist
Year: ?
Make: Niagara
Model: 510 RC 3/8
Condition: Good
Electrical: 230/460/3 wired 230

Machine Status:Can be powered up
Shipping Info:We can load
Weight:2,000 lbs
Dimension: L x W x H19' x 2' x 7'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$4,995.00 reduced USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • Circle Shear
    Make: Niagara
    Model: 510 RC 3/8
    Capacity: 3/8" mild steel
    Head Throat:36"
    Tail Throat: 58"
    Work Height from floor: 39"

    Tail was disassembled, because machine is
    not
    currentl being used.

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 37081 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


01220160-NA


4,000

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - 1963? Make - Wiedemann Model - R-61
Mouseover Thumbnails to Enlarge


Price: $6795.00 USD   
Category: Hole Punches: Single,Turret and CNC
Capacity: 40 Ton x 33" Throat

Ad # 15368

Add/Remove from Checklist
Year: 1963?
Make: Wiedemann
Model: R-61
Condition: Needs Work
Electrical: 460/3Phase

Machine Status:Not Under Power
Shipping Info:Rigging Fee Extra
Weight:12,000 lbs
Dimension: L x W x H25' x 15' x 9'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$6795.00 USD


Click Here to Print Quote

Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item   

General Description
  • Turret Punch Press
    Make: Wiedemann
    Model: R-61
    Capacity: 40 Ton, 33" throat
    Table size: 5' x 24'

    Will punch 6" hole in 1/8" mild steel
    Will punch 3" hole in 1/4" mild steel

    Full usable 33" throat to pierce center of
    60"
    wide sheet

    Does need minor work - possible solenoid

    Owner's Manual included with other paperwork

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 33686 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


01220160-NA


make offer

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - Make - Roto Die Model - 15
Mouseover Thumbnails to Enlarge


Price: $8,795.00 USD   
Category: Brakes Press: Hydraulic
Capacity: 120" x 14 gauge mild Steel, or 16 gauge Stainless Steel

Ad # 14282

Add/Remove from Checklist
Year:
Make: Roto Die
Model: 15
Condition: Good
Electrical: 230/460/3 wired 230

Machine Status:Not Under Power
Shipping Info:We can load
Weight:9,000 lbs
Dimension: L x W x H13' x 3' x 7'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$8,795.00 USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • Roto Die Hydraulic Press Brake Model: 15
    Capacity: 10' x 14 gauge mild steel,
    10' x 16 gauge stainless steel

    Motor 15 HP
    Length of Stroke 3"
    Strokes / Minute 20 to 50
    Die Clearance 2-1/8"
    Die Space 7-1/2"

    1 - No. 37 Roto-Die with:
    7Ί cross-braking groove
    85Ί die opening 3/8” wide
    85Ί die opening 7/8” wide
    30Ί die opening 1/2” wide

    Roto-Die hydraulic press brake is
    equipped
    with
    depth-of-stroke adjustment with
    indicators,
    length-of-stroke adjustment.



Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00820140-NA


6,000

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - ? Make - Rolador Model - R32
Mouseover Thumbnails to Enlarge


Price: $49,750 reduced USD   
Category: Roll Formers: Angle/Profile Bending Rolls
Capacity: 19 stands, 30" work area, 2" shafts

Ad # 14137

Add/Remove from Checklist
Year: ?
Make: Rolador
Model: R32
Condition: Good
Electrical: 230/460/3 wired 230

Machine Status:Not Under Power
Shipping Info:Rigging Fee Extra
Weight:
Dimension: L x W x H34' x 5' x 5'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$49,750 reduced USD


Click Here to Print Quote

Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item   

General Description
  • Roll Mill
    Make: Rolador R32
    19 stands
    30" work area
    2" shafts
    C to C 5" with 4: up adjustment
    30 Foot total length
    25 Hp 230-460 V 3 ph motor


Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 7 % Buyers Premium applies to the final sale price of this item   

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00620140-NA


40,000.00

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - Make - Richards Model - # 24?
Mouseover Thumbnails to Enlarge


Price: $3495.00 USD   
Category: Benders & Swagers: Pipe and Tube
Capacity: 1 1/4" mild round steel. 2" 16ga. tubing.

Ad # 14004

Add/Remove from Checklist
Year:
Make: Richards
Model: # 24?
Condition: Fair
Electrical: 230/3Phase

Machine Status:Can be powered up
Shipping Info:We can load
Weight:300 lbs
Dimension: L x W x H24" x 36" x 36"

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$3495.00 USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • Richards Bender
    Capacity: 1 1/4" mild round steel. 2" 16ga.
    tubing.

    The machine is set up to bend tubing.
    Electrical: 220/ 3 phase

    Tooling included - pictured

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00520140-NA


500

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - 2006 Make - Custom made by FLC machin Model - n/a
Mouseover Thumbnails to Enlarge


Price: $22,995.00 reduced! USD   
Category: Roll Formers: Angle/Profile Bending Rolls
Capacity:

Ad # 13875

Add/Remove from Checklist
Year: 2006
Make: Custom made by FLC machin
Model: n/a
Condition: Good
Electrical: 230/3Phase

Machine Status:Can be powered up
Shipping Info:We can load
Weight:2000 lbs
Dimension: L x W x H17' x 5' x 6'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$22,995.00 reduced! USD


Click Here to Print Quote

Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item   

General Description
  • Custom Aluminum Former
    Pieces are connected to make fence
    3 Rolls of aluminum are included with machine
    Will make a 6ft piece / min

    Electrical: 230/ 3 phase
    HP: 4

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item   

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00320140-NA


18,000.00

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - 1920 Make - Sedgwick Model -
Mouseover Thumbnails to Enlarge


Price: $14,995.00reduced USD   
Category: Brakes Press: Mechanical
Capacity: 10 ft. x 1/8"

Ad # 13791

Add/Remove from Checklist
Year: 1920
Make: Sedgwick
Model:
Condition: Good
Electrical: 230/460/3 wired 230

Machine Status:Under Power
Shipping Info:We can load
Weight:20,000 lbs
Dimension: L x W x H12'x6'x11'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$14,995.00reduced USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • Sedgwick Mechanical Press Brake
    Capacity: 10ft x 1/8" or 4ft 3/16"
    front support arms

    Electrical: 220/3 phase
    2 Bottom dies included: 1 1/4 & 7/8

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00220140-NA


?10K

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - 1986 Make - Wiedemann Model - W3050
Mouseover Thumbnails to Enlarge


Price: $offer USD   
Category: Hole Punches: Single,Turret and CNC
Capacity: 30 Ton with 32 stations

Ad # 13712

Add/Remove from Checklist
Year: 1986
Make: Wiedemann
Model: W3050
Condition: Good
Electrical: 230/3Phase

Machine Status:Can be powered up
Shipping Info:Rigging Fee Extra
Weight:30,000
Dimension: L x W x H16' x 8' x 11'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$offer USD


Click Here to Print Quote

Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item   

General Description
  • Wiedemann Turret Press 30 Ton
    Model: W3050
    Capacity: 30 ton, 32 stations
    Maximum Material Thickness: 1/4"
    Tooling Style: 112/114
    1" Centers - 175HPM
    Table: 50" x 72"
    Throat: 50"

    Complete With:
    GE W-3 CNC Control
    Complete set of Punch Holders and Die
    Holders
    Quantity of Punches and Dies
    Tape Twin
    Cross Crank design
    Repositioning
    Note: needs new oil pump.

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item   

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


01120130-NA


45k offer

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - ? Make - Niles Bement Pond Model - ?
Mouseover Thumbnails to Enlarge


Price: $sold USD   
Category: Plate & Bending Rolls: Initial Pinch/Plate
Capacity: 6 ft. X Thickness?

Ad # 15367

Add/Remove from Checklist
Year: ?
Make: Niles Bement Pond
Model: ?
Condition: Fair
Electrical: 220 welders plug

Machine Status:Can be powered up
Shipping Info:Rigging Fee Extra
Weight:4,000 lbs
Dimension: L x W x H14' x 5' x 5'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$sold USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • Plate & Bending Rolls: Initial Pinch/Plate
    Make: Niles Bement Pond
    Length of Rolls: 6 feet
    Roll Diameter: 7 inches

    This machine is hydraulic and requires a
    hydraulic motor, that is not included with
    this plate roller.

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 33905 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


01220160-NA


make offer

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - 1960's ? Make - Diacro Model - 18-48
Mouseover Thumbnails to Enlarge


Price: $sold USD   
Category: Brakes Press: Hydraulic
Capacity: 12 Ton x 4ft

Ad # 13714

Add/Remove from Checklist
Year: 1960's ?
Make: Diacro
Model: 18-48
Condition: Fair
Electrical: 230/3Phase

Machine Status:Not Under Power
Shipping Info:We can load
Weight:1500 lbs
Dimension: L x W x H48" x 32" x 65"

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$sold USD


Click Here to Print Quote

Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item   

General Description
  • Diacro Hyda-Power Press Brake
    Model: 18-48
    Capacity: 12 ton x 4ft
    voltage: 220/ 3 phase
    HP: 3
    Overall length of bed & ram: 4'
    Distance between housings: 25"
    Stroke: 1-1/2"
    Ram adjustment: 2"
    Shut height S.D.A.U.: 7-1/2"
    Throat depth: 6-1/2"
    Width of bed: 3/4"
    upper die minimal tooling as shown
    Rear Operated Hand Back Gauge

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item   

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


01120130-NA


***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - 1960's ? Make - Chicago Dreis & Krump Model - 1214 R
Mouseover Thumbnails to Enlarge


Price: $sold USD   
Category: Brakes Press: Mechanical
Capacity: 16ft. x 150 Ton

Ad # 14254

Add/Remove from Checklist
Year: 1960's ?
Make: Chicago Dreis & Krump
Model: 1214 R
Condition: Good
Electrical: 230/3Phase

Machine Status:Can be powered up
Shipping Info:Rigging Fee Extra
Weight:27,000 lbs
Dimension: L x W x H18' x 6' x 10'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$sold USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • Chicago Dreis & Krump Mechanical Press Brake
    Model: 1214R
    Capacity: 150 Ton x 16'
    Electrical: 230/ 3 phase


Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00820140-NA


12,600 loaded

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - 60's ? Make - Chicago Model - L series ?
Mouseover Thumbnails to Enlarge


Price: $sold USD   
Category: Brakes Press: Mechanical
Capacity: 30 Ton x 6ft.

Ad # 14161

Add/Remove from Checklist
Year: 60's ?
Make: Chicago
Model: L series ?
Condition: Good
Electrical: 230/3Phase

Machine Status:Under Power
Shipping Info:We can load
Weight:5,000
Dimension: L x W x H8' x 5' x 8'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$sold USD


Click Here to Print Quote

Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item   

General Description
  • Chicago Press Brake - Mechanical
    Model: L series?
    Capacity: 6ft. x 30 Ton
    Electrical: 220/ 3 phase
    Distance between housings: 54"
    Throat: 6"

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item   

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00620140-NA


3,200 offer

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - 2004 Make - Tin Knocker Model - 1624
Mouseover Thumbnails to Enlarge


Price: $sold USD   
Category: Shears: Sheet Metal
Capacity: 16 Gauge x 24.25"

Ad # 13993

Add/Remove from Checklist
Year: 2004
Make: Tin Knocker
Model: 1624
Condition: Excellent
Electrical: 110/1Phase

Machine Status:Can be powered up
Shipping Info:We can load
Weight:500 lbs
Dimension: L x W x H46" x 45" x 60"

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$sold USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • Tin Knocker Slitter
    Model: 1624
    Capacity: 16 Gauge
    Throat: 24"
    Maxium Slitting Width: 24.25"
    Minimum Slitting Width: 1.25"
    Motor: 3/4 HP
    Electrical: 115v/single phase

    Nice machine with less than 40hrs.

    Owner's manual included

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 41592 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00520140-NA


1500.00

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - Make - Bema Model -
Mouseover Thumbnails to Enlarge


Price: $sold USD   
Category: Benders & Swagers: Pipe and Tube
Capacity: 1"

Ad # 13932

Add/Remove from Checklist
Year:
Make: Bema
Model:
Condition:
Electrical: 230/3Phase

Machine Status:Not Under Power
Shipping Info:We can load
Weight:3000
Dimension: L x W x H14'x4'x5'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$sold USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • Bema CNC Tube Bender
    Capacity: 1"
    Electrical: 220/3 phase

    1 Die Included: 1" round

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00420140-NA


1,200

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - 1999 Make - Famar Model - A 312 20/2
Mouseover Thumbnails to Enlarge


Price: $sold USD   
Category: Plate & Bending Rolls: Initial Pinch/Plate
Capacity: 14 Gauge x 78"

Ad # 15475

Add/Remove from Checklist
Year: 1999
Make: Famar
Model: A 312 20/2
Condition: Good
Electrical: 230/3Phase

Machine Status:Under Power
Shipping Info:We can load
Weight:2,700 lbs
Dimension: L x W x H9'x4'x4'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$sold USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • Initial Pinch Plate Bending Rolls(Pyramid Type)
    Make: Famar
    Year: 1999
    Capacity: 14 Gauge x 78"
    Electrical: 220/3phase

    Number of rolls: 3
    Roll Diameter: 4.5"
    HP: 3

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 29196 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00320170-NA


3,000

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - 2008 Make - Acra Bend Model - US 8810
Mouseover Thumbnails to Enlarge


Price: $sold USD   
Category: Brakes Press: Hydraulic
Capacity: CNC 88 tons x 10ft.

Ad # 15472

Add/Remove from Checklist
Year: 2008
Make: Acra Bend
Model: US 8810
Condition: Good
Electrical: 230/3Phase

Machine Status:Under Power
Shipping Info:Rigging Fee Extra
Weight:12,100 lbs
Dimension: L x W x H11'x5'x8'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$sold USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • CNC Hydraulic Press Brake
    Make: Acra-Bend
    Model: 8810
    Capacity: 88 Tons x 10ft.

    Tonnage:.................. 88
    Bending length:........... 98.4”
    Dist. Between Housings:... 81.8”
    Throat Depth:............. 9.8”
    Stroke Length:............ 3.94”
    Ram Adjustment:........... 1.96
    Fast Approach Speed....... 120 IPM
    Fast Return Speed......... 120 IPM
    Press Speed............... 20 IPM
    Motor Size:............... 10 HP - 220/440V -
    3
    Phs
    Capacities:
    MILD STEEL:
    9 Ga ............... 8'
    5/16" .............. 4’
    STAINLESS:
    13 Ga .............. 8'
    ALUMINUM:
    1/4" ............... 8'

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 32558 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00320170-NA


20,000

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

Welding Equipment

We found 2 matching ads. Now displaying the remaining 2 ads.

FOR SALE: Year - 2005 Make - Gullco Model - GBM -18
Mouseover Thumbnails to Enlarge


Price: $sale pending USD   
Category: Misc. Welding Equip. / Acc
Capacity: stainless steel and aluminum plate from 1/4” to 1 1/2”

Ad # 13942

Add/Remove from Checklist
Year: 2005
Make: Gullco
Model: GBM -18
Condition: Good
Electrical: 460/3Phase

Machine Status:Can be powered up
Shipping Info:We can load
Weight:200 lbs
Dimension: L x W x H2' x 2' x 3'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$sale pending USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • Gullco Portable Beveller Model: GBM -18
    Capacity:Maximum Bevel Width: 0.71” (18.00 mm) at
    standard 30° bevel angle on material with a
    tensile strength of 64,000 lb/
    in 2 (45 Kg/mm2)
    Maximum Bevel Depth: 0.61” (15.6 mm) at
    standard 30° bevel angle on material with a
    tensile strength of 64,000 lb/
    in 2 (45 Kg/mm2)
    Min. Plate Thickness: 1/4’’ (6.0mm)
    Thinner
    material can be bevelled, consult the
    factory for details
    Max. Plate Thickness: 1 1/2” (38.1 mm)

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 42709 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00420140-NA


4,000

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - ? Make - Miller Model - Thunderbolt AC/DC
Mouseover Thumbnails to Enlarge


Price: $sold USD   
Category: Portable Welders
Capacity: AC/DC 230 Volts, 45.5 Amp.

Ad # 13987

Add/Remove from Checklist
Year: ?
Make: Miller
Model: Thunderbolt AC/DC
Condition: Good
Electrical: 110/220/1Ph

Machine Status:Not Under Power
Shipping Info:We can load
Weight:100 lbs
Dimension: L x W x H24" x 24" x 24"

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$sold USD


Click Here to Print Quote

Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item   

General Description
  • Miller Portable Welder AC/DC
    Model: Thunderbolt
    230 Volts
    1 Phase
    45.5 amps.

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 38673 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00520140-NA


300

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

Press Room Equipment

We found 5 matching ads. Now displaying the remaining 5 ads.

FOR SALE: Year - ? Make - Minster Model - Minster 35
Mouseover Thumbnails to Enlarge


Price: $1,750 reduced! USD   
Category: OBI Presses
Capacity: 35 Ton x 100 strokes per minute

Ad # 14463

Add/Remove from Checklist
Year: ?
Make: Minster
Model: Minster 35
Condition: Good
Electrical: 230/3Phase

Machine Status:Under Power
Shipping Info:We can load
Weight:7,000 lbs
Dimension: L x W x H4'x'5'x9'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$1,750 reduced! USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • Minster O.B.I. Punch Press
    Model: Minster 35
    Make: Minster
    Capacity: 35 Ton x 100 Strokes per min.
    Electrical: 220/ 3 phase
    Slide Stroke: 3"
    Slide Adjustment: 2.25"
    Strokes per Minute: 100

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 37498 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


01120140-NA


1,000

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - 1968 Make - Federal Model - Federal 45
Mouseover Thumbnails to Enlarge


Price: $1,750 reduced! USD   
Category: Gap Frame Presses
Capacity: 45 Ton

Ad # 14459

Add/Remove from Checklist
Year: 1968
Make: Federal
Model: Federal 45
Condition: Good
Electrical: 230/3Phase

Machine Status:Under Power
Shipping Info:We can load
Weight:7,000
Dimension: L x W x H4'x'5'x9'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$1,750 reduced! USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • Gap Frame Punch Press
    Make: Federal
    Model: Federal 45
    Capacity: 45 Ton
    Electrical: 230/ 3 phase

    Stroke: 3"
    Bed: 18-28
    Die Space: 11"
    Throat: 10"
    Ram Adjustment: 2.5"
    Stroke per min: 20

    foot pedal operated

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 37607 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


01120140-NA


1,000

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - ? Make - Smith Tool Model - M1
Mouseover Thumbnails to Enlarge


Price: $800 USD   
Category: Miscellaneous Presses
Capacity: 3" throat x 3/4" 16 gauge

Ad # 14038

Add/Remove from Checklist
Year: ?
Make: Smith Tool
Model: M1
Condition: Fair
Electrical: Other

Machine Status:
Shipping Info:We can load
Weight:200 lbs
Dimension: L x W x H2' x 2' x 5'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$800 USD


Click Here to Print Quote
General Description
  • Smith Tool Co. Manual foot press (kick press)
    Model: M1
    Capacity: 3/4" 16 Gauge
    Throat: 3"

    Tooling: various dies included

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies

This Ad Has Been Viewed 38598 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00520140-NA


500

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - 1960's Make - Bliss Model - 21B-M
Mouseover Thumbnails to Enlarge


Price: $2495.00 USD   
Category: OBI Presses
Capacity: 50 Ton

Ad # 13929

Add/Remove from Checklist
Year: 1960's
Make: Bliss
Model: 21B-M
Condition: Fair
Electrical: 230/3Phase

Machine Status:Not Under Power
Shipping Info:We can load
Weight:5,000 lbs
Dimension: L x W x H4'x 6'x10'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$2495.00 USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • Bliss OBI Punch Press
    Model: 21B-M
    Capacity: 50 Ton
    Electrical: 220/3 Phase
    Stroke 6"
    Bed Area 29.5" x 19.5"
    Ram Area 9" x 10-5/8" Ram
    Shut Height 10.75"
    Ram Adjustment 2.5" Adjustment of Slide
    Speed 45 SPM
    HP: 5

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 38790 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00420140-NA


800

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - 2004 Make - Tin Knocker Model - 1624
Mouseover Thumbnails to Enlarge


Price: $sold USD   
Category: Slitters
Capacity: 16 Gauge x 24.25"

Ad # 13994

Add/Remove from Checklist
Year: 2004
Make: Tin Knocker
Model: 1624
Condition: Excellent
Electrical: 110/1Phase

Machine Status:Can be powered up
Shipping Info:We can load
Weight:500 lbs
Dimension: L x W x H46" x 45" x 60"

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$sold USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • Tin Knocker Slitter
    Model: 1624
    Capacity: 16 Gauge
    Throat: 24"
    Maxium Slitting Width: 24.25"
    Minimum Slitting Width: 1.25"
    Motor: 3/4 HP
    Electrical: 115v/single phase

    Nice machine with less than 20hrs.

    Adjustable feet added for use on unlevel
    ground.

    Owner's manual included.

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 38349 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00520140-NA


1500.00

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

Automotive Tools & Equipment

We found 3 matching ads. Now displaying the remaining 3 ads.

FOR SALE: Year - 1980's Make - Winona Van Norman Model - CG 280
Mouseover Thumbnails to Enlarge


Price: $24,995 USD   
Category: Engine & Machine Shop Equip.
Capacity: Crankshaft Grinder: 79" between chucks

Ad # 15413

Add/Remove from Checklist
Year: 1980's
Make: Winona Van Norman
Model: CG 280
Condition: Good
Electrical: 230/3Phase

Machine Status:Under Power
Shipping Info:Rigging Fee Extra
Weight:12,000 lbs
Dimension: L x W x H16' x 6' x 6'

Machine Location:
City: On Request
State: Alabama
Country:
USA

Price:

$24,995 USD


Click Here to Print Quote

Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item   

General Description
  • Winona Van Norman Crankshaft Grinder
    Model: CG280
    Under power

    Electrical: 230/ 3 phase
    10.5 HP
    • Max.distance between chucks: 79"
    (2006mm)
    • Max.distance between centers:81"
    (2057mm)
    • Max. swing over table: 22" (558 mm)
    • Stroke capacity: 10" (254 mm)
    • Max. grinding wheel diameter: 30"(762
    mm)

    Includes 3 steady rests, extra grinding
    wheels as pictured, grinding wheel
    sharpener

    Also includes a crankshaft straightner that
    is not pictured.

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 30365 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00120170-NA


15k-20k

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - Make - Mustang Model - MD 1100
Mouseover Thumbnails to Enlarge


Price: $35,995 USD   
Category: Dynamometers
Capacity: 2,500 hp (2WD)

Ad # 15407

Add/Remove from Checklist
Year:
Make: Mustang
Model: MD 1100
Condition: Excellent
Electrical: 110/220/1Ph

Machine Status:Under Power
Shipping Info:We can load
Weight:8,000 lbs
Dimension: L x W x H28' x 12' x 8'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$35,995 USD


Click Here to Print Quote

Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item   

General Description
  • Dynamometer
    Make:Mustang
    Model: MD 1100
    Electrical: 220/single phase

    Includes: Lift, Dynamometer, Computers,
    Fan

    Max Horsepower:
    2,500 hp (2WD)
    3,500 hp peak measurement capacity (AWD)

    Loading Device:
    Air-cooled eddy current power absorber
    (model
    MDK-250)

    Torque Measurement Device:
    Strain Gauge Type Dynamic Load Cell.
    Provides
    closed loop control signal for dynamic
    vehicle
    loading.

    Inertia:
    1,500 lbs. nominal

    Max Speed:
    225 mph

    Controls:
    Closed Loop Digital Controller with
    Windows
    based software. Includes Patented Virtual
    Road
    Simulation Technology (RST)
    Rolls/Wheelbase:
    Precision machined and dynamically
    balanced,
    knurled rolls
    30” diameter balanced rolls
    1 x 50”, 1 x 28” face length
    30” inner track width
    108” outer track width

    Roll Lock:
    Pneumatic for locking rolls (not for
    loading)

    Axle Weight:
    10,000 lbs maximum



Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 30032 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00120170-NA


30k

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - ?? Make - Storm Vulcan Model - 15A Special
Mouseover Thumbnails to Enlarge


Price: $sold USD   
Category: Engine & Machine Shop Equip.
Capacity: 60" Between centers

Ad # 15430

Add/Remove from Checklist
Year: ??
Make: Storm Vulcan
Model: 15A Special
Condition: Good
Electrical: 230/3Phase

Machine Status:Can be powered up
Shipping Info:We can load
Weight:8,000 lbs
Dimension: L x W x H10'x4'x6'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$sold USD


Click Here to Print Quote

Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item   

General Description
  • Crankshaft Grinder
    Make: Storm Vulcan
    Model: 15A Special
    Capacity: 60" between centers
    Electrical: 220/3 phase
    • Max. swing over table: 21"
    • Stroke capacity: 7"
    • Max. grinding wheel diameter: 24"


    Includes:
    8 grinding wheels
    Arnold Gauge
    Steady Rest
    Wheel Dresser

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 29814 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00220170-NA


6,000

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

Material Handling Equipment

We found 1 matching ad. Now displaying the final ad.

FOR SALE: Year - Make - Acco Wright Model - 2 Ton New Century Series
Mouseover Thumbnails to Enlarge


Price: $2195.00 USD   
Category: Cranes/Hoists & Manipulators
Capacity: 2 Ton

Ad # 15424

Add/Remove from Checklist
Year:
Make: Acco Wright
Model: 2 Ton New Century Series
Condition: Good
Electrical: 110/220/1Ph

Machine Status:Not Under Power
Shipping Info:We can load
Weight:
Dimension: L x W x H

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$2195.00 USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • 2 Ton Wire Rope Hoist
    Make: Acco Wright
    Model: 2 Ton Speedway New Century Series

    Electrical: 220/ single phase

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 29555 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00220170-NA


1500

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

Finishing, Coating & Cleaning

We found 3 matching ads. Now displaying the remaining 3 ads.

FOR SALE: Year - Make - Model -
Mouseover Thumbnails to Enlarge


Price: $1250.00 USD   
Category: Cleaning Equipment
Capacity: Dust Collector

Ad # 13933

Add/Remove from Checklist
Year:
Make:
Model:
Condition: Fair
Electrical: 230/3Phase

Machine Status:Under Power
Shipping Info:We can load
Weight:3000
Dimension: L x W x H6' x 5' x 20'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$1250.00 USD


Click Here to Print Quote
General Description
  • Dust Collector
    2 parts

    Blue part collects small particles in tubes
    then gathers in collection tray at bottom.

    Tall grey portion collects large particles
    and has viabratory motor on top
    14" opening for duct pipe attachment

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies

This Ad Has Been Viewed 38372 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00420140-NA


300

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - ? Make - Clam Model - MW-122494
Mouseover Thumbnails to Enlarge


Price: $2250.00 USD   
Category: Cleaning Equipment
Capacity: Tank - 22" x 11" x 16 "

Ad # 13784

Add/Remove from Checklist
Year: ?
Make: Clam
Model: MW-122494
Condition: Fair
Electrical: 230/3Phase

Machine Status:Not Under Power
Shipping Info:We can load
Weight:400 lbs
Dimension: L x W x H36"x31"x70"

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$2250.00 USD


Click Here to Print Quote

Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item   

General Description
  • Clam Mini Wash parts washer
    Model: MW-122494
    Electrical: 230/3 phase
    Tank size: 22"x11"x16"


Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 38600 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00220140-NA


?

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - 2012 Make - Timesaver Model - Lynx 37 MWT DBB-60
Mouseover Thumbnails to Enlarge


Price: $sold USD   
Category: Misc. Finishing Equip.
Capacity: 37" wide belt

Ad # 15593

Add/Remove from Checklist
Year: 2012
Make: Timesaver
Model: Lynx 37 MWT DBB-60
Condition: Needs Work
Electrical: 460/3Phase

Machine Status:Not Under Power
Shipping Info:We can load
Weight:12,000 lbs
Dimension: L x W x H10'x6'x8'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$sold USD


Click Here to Print Quote

Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item   

General Description
  • Timesaver Wet Wide Belt Sander
    Model: Lynx 37 MWT DBB-60
    Capacity: 37" belts
    3 heads - 1 belt, 2 brushes
    Electrical: 460/3 phase

    60” Abrasive Belt Length
    Automatic Abrasive Belt Tracking
    0-8” Bed Opening (38” Constant Passline)
    15-45 FPM Feed Speed
    6” Diameter Contact Drum
    6” Diameter Brush
    Built-in Coolant Filter and Re-circulation Pump
    Air Knife Parts Dryer
    was used occasionally (2-3) times a week machine hrs approx 2800 as of 4/1/19


    Previous questions answered on unit-below

    Why types of material were ran through the machine? ...used for stainless ,aluminium ,titanium..

    Are there any service records? ..minimal..just replaced conveyor belt recently

    What if any parts have been replaced in the machines lifetime?... a few refurbs


    Are there loading capabilities? If not who is responsible for them?...we can load onto flat bed

    Is the machine in fair conditions but it needs some work to reach its full potential and run properly, but not worn out..such as work-door latch safety switch,middle station drum has wobble(bearing)may needs replaced on bearings installed on belt shaft or alignment issue? station 3 needs motor repaired or replaced..also main conveyor in feed feed belt has tear and may need replaced depending on application drum has gouge in it and may need replaced but 2 ft part on left ok,1 ft part on right ok..with no finishing marks on part...we didnt need too for our if not replaced ok for about 24" part width ..buttons work but plastic insert is broken on a few of them.

    Does the machine function as it’s supposed to? yes but it will need 5-10k for optimal peak performance and to put in good running condition, possible to work around most issues..

    Does the seller warranty the item? no as is where is..no warranty

    Does the machine come with any extras? Belts brushed etc..a few spare belts

    What type grit belts were used? 80-400 grit used
    note:machine sold new for $110,000

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 29511 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00820170-NA


10-12k

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

Woodworking Machinery

We found 1 matching ad. Now displaying the final ad.

FOR SALE: Year - 2002 Make - Weeke Model - BHT 320 2/2
Mouseover Thumbnails to Enlarge


Price: $52,995.00 USD   
Category: Routers
Capacity: X: 2500.000 mm (98.400 in)Y: 700.000 mm (27.600 in)Z: 30.000 mm (1.200

Ad # 15401

Add/Remove from Checklist
Year: 2002
Make: Weeke
Model: BHT 320 2/2
Condition: Excellent
Electrical: 230/460/3 wired 460

Machine Status:Under Power
Shipping Info:Rigging Fee Extra
Weight:15,000 lbs
Dimension: L x W x H26' x 14' x 8'

Machine Location:
City: On Request
State: Florida
Country:
USA

Price:

$52,995.00 USD


Click Here to Print Quote

Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item   

General Description
  • CNC 3 axis router
    Make: Weeke
    Model: BHT 320 2/2 ProFi Line
    Capacity:
    X: 2500.000 mm (98.400 in)Y: 700.000 mm
    (27.600
    in)Z: 30.000 mm (1.200

    Barcode scanner integrated to WoodWop
    software
    Feed-thru conveyorized system
    Automatic part positioning. Machine will
    automatically align and secure the part to
    the vacuum pods.
    Dual independent acting zones
    Each zone contains 2 spindles (Total of 4
    spindles)
    6-position automatic tool changer on each
    zone
    Includes Becker vacuum pump
    Includes 2 newer Termotek chillers
    (upgraded
    in 2015)

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 33438 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00120170-NA


35k - 40k

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

View Detailed Ads