User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - 1997 Make - AMERA SEIKI Model - TC-4L |
---|
FOR SALE: Ad # 13226 , Year = 1997 , Make = AMERA SEIKI , Model = TC-4L |
|
Category: Turning Center 11 in. & over chuck
|
Capacity: 12" chuck
|
Ad #
13226 |
Year:
| 1997
|
Make:
| AMERA SEIKI
|
Model:
| TC-4L
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 4500 lbs.
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
South Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Fanuc CNC Control
Chuck Size 12" Round Collet Capacity 3" Hex Collet Capacity 2 9/16" Square Collet Capacity 2" Max work length 23.62" Max Turning Diameter 13" Max Turning Length 23.62" Max Swing Diameter Over Slide Center 20" Spindle Nose A2-8 No. of Tool Stations - 12 X - Axis 8.66" Z - Axis 25.60" 40 HP AC motor
|
Electrical Description |
|
|
|
FOR SALE: Year - 2000 Make - Milltronics Model - ML28 |
---|
FOR SALE: Ad # 13142 , Year = 2000 , Make = Milltronics , Model = ML28 |
|
Category: Combination (teach lathe) CNC / Manual
|
Capacity: 28 swing x 120centers
|
Ad #
13142 |
Year:
| 2000
|
Make:
| Milltronics
|
Model:
| ML28
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 14000 llbs
|
Dimension: L x W x H | 230" x 60" x 60" |
Machine Location:
|
City: |
On Request
|
State: |
South Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Milltronics ML 28 Teach type :cnc/manual Lathe
28" swing over bed, 19" over cross slide 120" center distance 16" chuck-3 jaw QC toolpost Hrs: 28002.3 hrs total on time 10-2000rpm max spindle speed, 3 speed gearbox 4.3" Spindle Bore 28" Swing-Over bed D-1-8 Camlock, Motor 20/15 HP Conversational or G-Code Programming, CNC, Teach & Manual Modes, 16" Manual Chuck, Steady Rest (9" Dia. Capacity), Dorian Single Tool Post, Manual Tailstock, Manual/Electronic Handwheels, Full Chip Guard Enclosure, Three Gear Range Headstock machine was recently taken out of service, shows normal wear but runs well
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
FOR SALE: Year - 1956 Make - Lodge & Shipley Model - 20" x 54" |
---|
FOR SALE: Ad # 13223 , Year = 1956 , Make = Lodge & Shipley , Model = 20" x 54" |
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: 18 swing x 54 centers
|
Ad #
13223 |
Year:
| 1956
|
Make:
| Lodge & Shipley
|
Model:
| 20" x 54"
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 7500
|
Dimension: L x W x H | 148" x 60" x 65" |
Machine Location:
|
City: |
On Request
|
State: |
South Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Lodge & Shipley 20" x 54"
20" swing over bed x 54" between centers Swing over bed -20" 1/2" max Swing over cross comp[ound/slide-13" threading: English only Spindle bore -2" chuck dia 12"-4 jaw spindle speed 20-2000 rpm taper attachment toolpost QC
|
Electrical Description |
|
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1976 Make - Metalexport Model - 17 x 60 |
---|
FOR SALE: Ad # 1758 , Year = 1976 , Make = Metalexport , Model = 17 x 60 |
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: 17 x 60 Lathe
|
Ad #
1758 |
Year:
| 1976
|
Make:
| Metalexport
|
Model:
| 17 x 60
|
Condition:
| Needs Work
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 3.500 lbs
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
|
Price:
| $Sold USD
|
|
General Description |
- Poland made
With Chuck Tool post Some Tooling
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Hiernault Somua Model - 23swing x 60"centers |
---|
FOR SALE: Ad # 1744 , Year = , Make = Hiernault Somua , Model = 23swing x 60"centers |
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: Heavy duty Engine Lathe
|
Ad #
1744 |
Year:
|
|
Make:
| Hiernault Somua
|
Model:
| 23swing x 60"centers
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 7,500 lbs Approx
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
South Carolina
|
Country:
|
|
Price:
| $sold USD
|
|
General Description |
- Totally Metric
Coolant 23" Swing x 60" Centers
|
Electrical Description |
|
Comments: |
- Will need motor rewound to change voltage and Magnetic Starter
NOTE: Machine totally METRIC.
|
|
|
FOR SALE: Year - Make - Craftman Model - |
---|
FOR SALE: Ad # 13038 , Year = , Make = Craftman , Model = |
|
Category: Manual Lathe Parts & Accessories
|
Capacity: 13 x 40
|
Ad #
13038 |
Year:
|
|
Make:
| Craftman
|
Model:
|
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: | 800
|
Dimension: L x W x H | 60 x 24 x 36 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Excellent Conditions
13" x 40" 4 Jaw Chuck 3 Jaw Chuck Steady Rest Collet Closer-has collets with it Face Plate Threading: std & metric Quick Change Tool Post with Holders Live Center
|
Electrical Description |
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - Make - Wells-Setting Model - 9 x 42 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 13224 , Year = , Make = Wells-Setting , Model = 9 x 42 |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 9 x 42
|
Ad #
13224 |
Year:
|
|
Make:
| Wells-Setting
|
Model:
| 9 x 42
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 1800
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
South Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 1974 Make - New Britian Model - 635 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 1750 , Year = 1974 , Make = New Britian , Model = 635 |
|
Category: Automatic Bar Machines
|
Capacity: New Britian Automatic Bar Machine
|
Ad #
1750 |
Year:
| 1974
|
Make:
| New Britian
|
Model:
| 635
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | Requires rigger
|
Weight: | Heavy ?
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
South Carolina
|
Country:
|
|
Price:
| $Sold USD
|
|
General Description |
- Stock Reel and Stand
Trusty Cook Hush Tubes Prab Belt-Type Chip Conveyor w/Electric Motor Dr. Trabon Lubrication System (5) Cross Slides 6th Position Cut-Off Slide (5) Tool Slide Holders Saddle Type 5th Position Threading-Electric Clutches (6) Collet Tubes w/ Adjusting Nuts (6) Pusher Tubes (6) Collet Masters - Hardinge Style B35 (6) Pusher Masters - Hardinge Style S35 Chucking Spool Compensators Late Style Chucking Spools
|
Electrical Description |
- 40 Hp Main Dr. Motor/3HP 480 Voltage
|
Comments: |
|
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
FOR SALE: Year - 1995 Make - Behringer Model - HBP310/403GA |
---|
FOR SALE: Ad # 10622 , Year = 1995 , Make = Behringer , Model = HBP310/403GA |
|
Category: Fully Automatic Horizontal Band Saw
|
Capacity: mitre saw-Capacity (rect) 90°-15.7" x 12.2"
|
Ad #
10622 |
Year:
| 1995
|
Make:
| Behringer
|
Model:
| HBP310/403GA
|
Condition:
| Needs Work
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 6600lbs
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- CNC programmable length and angle setting
available mitre saw-Capacity (rect) 90°-15.7" x 12.2" Large dual column - parallel down-feed design Fully automatic hydraulic blade tensioning Horizontal and vertical material clamping Biased saw blade for cutting of profiles . Std. specs below please verify Model HBP310/403GA Capacity (rect) 90°-15.7" x 12.2" 45° left WxH-10.6"x12.2" 45° right WxH-13.7"x12.2" Includes all manuals Also incl;udes all conveyors shown in pix Band Width-1 1/4" Drive Motor (HP)-4 Weight (LBS.)-6,600
|
Electrical Description |
|
|
|
FOR SALE: Year - 96? Make - DOALL Model - C-4100-NC |
---|
FOR SALE: Ad # 9452 , Year = 96? , Make = DOALL , Model = C-4100-NC |
|
Category: Fully Automatic Horizontal Band Saw
|
Capacity: 16in Round or 14 x 16 rectangle
|
Ad #
9452 |
Year:
| 96?
|
Make:
| DOALL
|
Model:
| C-4100-NC
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
South Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Doall Bandsaw
with 186" Blade Please verify below std specs..
Max Cutting Capacity 14 in. high x 16 in.wide (355 x 410 mm) rectangles, 16 in.(410 mm) rounds, 14 in. (355 mm) squares Blade Band saw blade dimensions 1-1/2 x 186 in. (41 x 4,570 mm) Band Speed Infinitely variable band speed drive 40-360 fpm (12-110 m/min) Motor Capacity Total motor capacity 12.2-hp (9.1 kw) Band Drive Band drive 10-hp (7.5 kw) Hydraulics Hydraulic system 2-hp (1.5 kw) Band Wheels Wheel diameter 21 in. (535 mm) Coolant Pump Coolant pump 1/10-hp (.075 kw) Min Butt End Min. butt end with automatic feed 3 in. (75 mm) Pass Line Height (minimum) 30-1/2 in. (775 mm) Index Length, Single Single automatic index length 24 in. (610 mm) Color DoALL Blue Index Length, Min Min. automatic index length 1/4 in. (6 mm) Includes the following standard Equipment Spring-loaded, zero clearance, carbide-faced saw guide with lead-in roller on both guide arms Powered chip conveyor to discharge chips Chip shovel Coolant system integral coolant pump, coolant applied through saw guides Flushing hose Band door interlocks Minimum bar end vise Worklight mounted on control panel (60 Hz machines only) Idler wheel motion detector stops machine automatically if band stalls in workpiece Variable vise pressure control, with gages located by operator’s control console Transmission oil Random cut positioning Rapid travel index vise control Programmable cut length with digital readout Complimentary coolant package Power driven band clearing brush Automatic workheight sensor Blade guard Band speed control and display at operator’s control panel Out of stock sensor Automatic band-kerf compensator Saw head-rapid approach control Instruction and parts manual ATF hydraulic oil for wide-range temperature applications Job selector
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - KELLER Model - 3HA |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 1726 , Year = , Make = KELLER , Model = 3HA |
|
Category: Cold Saws & Power Hack Saws
|
Capacity: 8" POWER HACK SAW
|
Ad #
1726 |
Year:
|
|
Make:
| KELLER
|
Model:
| 3HA
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 400 LBS APPROX.
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
South Carolina
|
Country:
|
|
Price:
| $SOLD USD
|
|
General Description |
- 8" ROUND CAPACITY
12-14INCH BLADE LENGTH VARIABLE SPEED 50 - 350
|
Electrical Description |
|
Comments: |
- NEED PUT BACK IN TIME, MINOR REPAIR
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 2003 Make - Saacke Model - UWIA CNC 5A |
---|
FOR SALE: Ad # 5008 , Year = 2003 , Make = Saacke , Model = UWIA CNC 5A |
|
Category: Tool & Cutter Grinders
|
Capacity: SAACKE--CNC Tool & Cutter GRINDER
|
Ad #
5008 |
Year:
| 2003
|
Make:
| Saacke
|
Model:
| UWIA CNC 5A
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Requires rigger
|
Weight: | 4840 lbs.
|
Dimension: L x W x H | 77 x 90" |
Machine Location:
|
City: |
On Request
|
State: |
South Carolina
|
Country:
|
USA
|
Price:
| $sold 157,950 USD
|
|
Buyers Premium:
A 5 5 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- This tool & cutter Grinder Machine-with continous
path, 5 axis-X, Y, Z, A, B control Control: Num 1050with PC fitted for wet grinding
Software: Numroto-Plus PC absolute programming W/ windows 98 The controls are Numroto Plus, HP- 10.5. 512 K Along with software Packages as follows Pkg # 150622 Drill point, 150625 step faces & step drills, # 150630 Profile-form steps, # 1503827 Grinding flutes drills, step drills, & subland, # 15335 Profile-form cutters
Will Do: Drill points, Helical profile, S-form, 4 face point W/ straight & s form chisel edge, complete gashing, flute orientation : right hand cutting & right helix, left hand cutting & left helix, & mixed, step face drills, flute drills, ,step drills, & subland step drills, 10 steps max, form cutters, face form flat,
Work Area: 6" height of centers x 6" max tool dia Grinding table: X travel-13" table speed adjustable up to 394IMP usable table area: 3.25 x 5.125 " cross travel Z stroke-10.25" vert stroke travel-8.25" guideways-roller Turret Grinding = swivel in horiz plane B axis Torsion speed 180 deg / sec drive motor spindle: 9.4HP orginally upgraded to 11HP Will grind up to 11-1/4" flute length upgrade done Has all collets and chucks
memory software windows 98 w/ siemens drives Renishaw 3 D measuring probe-fixed at grinding head modified with saacke stylus for tool length , flute orientation & and lead of cutting tools Auto lube system floor space: 77 x 90" Direct drive headstock-600RPM max-liqued coolescan be used to cylindrical grinding co2 fire interface paper band filter The cutting length is max. tool dia., 6 1/2",travel X-axis- 13", Y-axis-8 1/4", Z-axis-10 5/8" 8 wheel hubs, special draw bar for cat V50 & NMTB 50 holders Lyndex & Nikkon chucks & holders LSK 10 plus 14 collets .118-,393, LSK 16plus12 collets for .393 to .629 & LSK 25 plus 19 collets .629-1" all with spanner wrenches Also Ultra Lock Chuck 1.25 # C50UMC1250L Lyndex chuck 150TG C5017-1500 w collets & spanner 2" end mill holders # 50NMTB 2" end mill holder W/ # 50cat taper x 51/4 long both spindles have been rebuilt by Setco & balanced Trion Air Boss Mist collector # MP1200M-1HP Also incldes 8 diamond wheels various sizes 10 Borazon wheels various sizes 18 dressing sticks.. extended tool length holders, 50 taper Holders max length 11.5" includes Lydex & Nikken holders, Cylindrical Grinder workhead included-for step tools
|
Electrical Description |
|
Comments: |
- CONDITION LIKE NEW. USED VERY LITTLE. LEAVING
CNC GRINDER BUSINESS. This machine sold new for $280,000. Machine has never been crashed and only run 2-8 hrs a week..
|
|
|
Buyers Premium:
A 5 5 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 1995 Make - Round O/Comec Model - PS - 255 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 1743 , Year = 1995 , Make = Round O/Comec , Model = PS - 255 |
|
Category: Initial Pinch & Pyramid Type Plate Bending Rolls
|
Capacity: ROUND- 0 PYRAMID ROLLER 8ft x 9/16in cap
|
Ad #
1743 |
Year:
| 1995
|
Make:
| Round O/Comec
|
Model:
| PS - 255
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 5000 lbs. Approx
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
South Carolina
|
Country:
|
|
Price:
| $Sold USD
|
|
General Description |
- 9/16" x 8' Capacity
Hydraulic Independent Powers Rolls Independent Roll Set Cone roll Attachment with 10" Rollers Angle Roll Attachment
|
Electrical Description |
|
Comments: |
- Very good; used very little.Sells for $80,000 new...
Roll has been cleaned up and put in service and ready to demo.
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 2007 Make - AKYAPAK Model - APK-101 |
---|
FOR SALE: Ad # 13225 , Year = 2007 , Make = AKYAPAK , Model = APK-101 |
|
Category: Roll Formers: Angle/Profile Bending Rolls
|
Capacity: 4"
|
Ad #
13225 |
Year:
| 2007
|
Make:
| AKYAPAK
|
Model:
| APK-101
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 4938
|
Dimension: L x W x H | 5 x 5 x 6 |
Machine Location:
|
City: |
On Request
|
State: |
South Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Akyapak # APK-101 angle roll former
Shaft diameter 100 mm Rolls diameter 300 mm Motor Power 11 kw Roll Type: Rolls, Angle Bending Manufacturer: AKYAPAK Model: APK-100 Angle Capacity: 4" / 101.6 mm Angle Capacity: 4" / 101.6 mm Angle Capacity: 0.500 " / 12.7 mm Revolution 7 rev-min made in turkey Shaft Recently Rebuilt basic tooling included -flat bar,angle iron & channel STANDART EQUIPMENTS " Machine body is steel (St- 52) construction." On APK 101 and APK 121 rolls are driven by hydraulic motor+planetry gearbox and gears." Hardened rolls." Shafts made of special steel (42 CrMo4), hardened and grounded." On APK 101 side guide rolls are in one direction manual adjustable." APK 121 side guide rolls are in two directions hydraulic adjustable." Horizontal working." Torque limiting device protectinSPECIAL EQUIPMENTS " Special rolls for tubes, profiles and angles." Digital display for hydraulic guide rolls." Hydraulic adjustable guide rolls in two directions." Variable speed of rotation." Special tooling sysems for bending U-I-H profiles." Spiral bending device." NC Playback Control System." CNC Graphic Control System." Digital Readout for profile position indication.g from overload during bending." Lower rolls hydraulic moveable up and down." Digital display for lower rolls." Separate and moveable control panel." Electrical and hydraulic protection against overloads." Manual lubrication" Suitable for CE
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - 1995 Make - MG Industry Model - MMIA |
---|
FOR SALE: Ad # 10623 , Year = 1995 , Make = MG Industry , Model = MMIA |
|
Category: Plasma
|
Capacity: 6' x 20' table, cuts up to 3/4" steel
|
Ad #
10623 |
Year:
| 1995
|
Make:
| MG Industry
|
Model:
| MMIA
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Requires rigger
|
Weight: |
|
Dimension: L x W x H | 6' x 20' |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- The Plasma Cutter was up graded from a 1070 Hypertherm control-70 watts to 100 watts
6' x 20' table cuts up to 3/4" steel very well with RSVP-301 Controls servo controls.
|
Electrical Description |
|
Comments: |
- Machine in very good condition.
|
|
|
FOR SALE: Year - 1996 Make - Balliu Model - LC1500 |
---|
FOR SALE: Ad # 12400 , Year = 1996 , Make = Balliu , Model = LC1500 |
|
Category: Laser
|
Capacity: 126 x 60" ---1/2" thick
|
Ad #
12400 |
Year:
| 1996
|
Make:
| Balliu
|
Model:
| LC1500
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Not Under Power
|
Shipping Info: | Rigging Fee Extra
|
Weight: | 21000
|
Dimension: L x W x H | 17.5 x 24.5 |
Machine Location:
|
City: |
On Request
|
State: |
South Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Balliu LC1500 laser cutter
Type of command CNC: Siemens Longitudinal travel X-axis: 3100 mm / 126" Cross travel Y-axis: 1500 mm/ 60" Height trvel Z-axis: 250 mm/ 9.8" Max cutting thickness in steel: 15 mm / 1/2" plus material shuttle / feed system includedMaximum Laser Capacity 2200 Watt less than 15,000 hrs total on machine machine not currently under power loading fee approx 1700.00 floor space needed 20' x 30' Note:machine ran well when taken out of service and was lubricated and alighned at that time We also have a step up transformer to run off 230/3 included with machine Owner needs the room thats why priced so low.. Note this machine may need a little TLC to run again because it has been sitting for a few years but ran well when taken out of service Rigging/loading onto flatbed truck fee:$ 1800.00
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|