|
User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 13226 | Turning Center 11 in. & over chuck |
| 1997 |
AMERA SEIKI |
TC-4L |
Fair |
sold |
Photo /
More Info. |
| 12" chuck: Fanuc CNC Control
Chuck Size 12"
Round Collet Capacity 3"
Hex Collet Capacity 2 9/16"
Square Collet Capacity 2"
Max work length 23.62"
Max Turning Diameter 13"
Max Turning Length 23.62"
Max Swing Diameter Over Slide Center 20"
Spindle Nose A2-8
No. of Tool Stations - 12
X - Axis 8.66"
Z - Axis 25.60"
40 HP AC motor |
|
| Ad # 13142 | Combination (teach lathe) CNC / Manual |
| 2000 |
Milltronics |
ML28 |
Fair |
sold |
Photo /
More Info. |
| 28 swing x 120centers: Milltronics ML 28 Teach type :cnc/manual Lathe
28" swing over bed, 19" over cross slide
120" center distance
16" chuck-3 jaw
QC toolpost
Hrs: 28002.3 hrs total on time
10-2000rpm max spindle speed, 3 speed gearbox
4.3" Spindle Bore
28" Swing-Over bed
D-1-8 Camlock,
Motor 20/15 HP
Conversational or G-Code Programming, CNC, Teach & Manual Modes, 16" Manual Chuck, Steady Rest (9" Dia. Capacity), Dorian Single Tool Post, Manual Tailstock, Manual/Electronic Handwheels, Full Chip Guard Enclosure, Three Gear Range Headstock
machine was recently taken out of service, shows normal wear but runs well |
|
We found 4 matching ads. Now displaying the remaining 4 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 13223 | General Purpose Lathe 15in. to 23in. swing |
| 1956 |
Lodge & Shipley |
20" x 54" |
Good |
sold |
Photo /
More Info. |
| 18 swing x 54 centers: Lodge & Shipley 20" x 54"
20" swing over bed x 54" between centers
Swing over bed -20" 1/2" max
Swing over cross comp[ound/slide-13"
threading: English only
Spindle bore -2"
chuck dia 12"-4 jaw
spindle speed 20-2000 rpm
taper attachment
toolpost QC |
|
| Ad # 1758 | General Purpose Lathe 15in. to 23in. swing |
| 1976 |
Metalexport |
17 x 60 |
Needs Work |
Sold |
Photo /
More Info. |
| 17 x 60 Lathe: Poland made
With Chuck
Tool post
Some Tooling |
|
| Ad # 1744 | General Purpose Lathe 15in. to 23in. swing |
| — |
Hiernault Somua |
23swing x 60"centers |
Very Good |
sold |
Photo /
More Info. |
| Heavy duty Engine Lathe: Totally Metric
Coolant
23" Swing x 60" Centers |
|
| Ad # 13038 | Manual Lathe Parts & Accessories |
| — |
Craftman |
— |
Good |
Sold |
Photo /
More Info. |
| 13 x 40: Excellent Conditions
13" x 40"
4 Jaw Chuck
3 Jaw Chuck
Steady Rest
Collet Closer-has
collets with it
Face Plate
Threading: std &
metric
Quick Change Tool
Post with Holders
Live Center
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 13224 | Knee Mills (Bridgeport Type) |
| — |
Wells-Setting |
9 x 42 |
Good |
sold |
Photo /
More Info. |
| 9 x 42: 9 x 42 with VS Head |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 1750 | Automatic Bar Machines |
| 1974 |
New Britian |
635 |
Good |
Sold |
Photo /
More Info. |
| New Britian Automatic Bar Machine: Stock Reel and Stand
Trusty Cook Hush Tubes
Prab Belt-Type Chip Conveyor w/Electric Motor Dr.
Trabon Lubrication System
(5) Cross Slides
6th Position Cut-Off Slide
(5) Tool Slide Holders Saddle Type
5th Position Threading-Electric Clutches
(6) Collet Tubes w/ Adjusting Nuts
(6) Pusher Tubes
(6) Collet Masters - Hardinge Style B35
(6) Pusher Masters - Hardinge Style S35
Chucking Spool Compensators
Late Style Chucking Spools |
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 10622 | Fully Automatic Horizontal Band Saw |
| 1995 |
Behringer |
HBP310/403GA |
Needs Work |
sold |
Photo /
More Info. |
| mitre saw-Capacity (rect) 90°-15.7" x 12.2": CNC programmable length and angle setting
available
mitre saw-Capacity (rect) 90°-15.7" x 12.2"
Large dual column - parallel down-feed design
Fully automatic hydraulic blade tensioning
Horizontal and vertical material clamping
Biased saw blade for cutting of profiles
.
Std. specs below please verify
Model HBP310/403GA
Capacity (rect) 90°-15.7" x 12.2"
45° left WxH-10.6"x12.2"
45° right WxH-13.7"x12.2"
Includes all manuals
Also incl;udes all conveyors shown in pix
Band Width-1 1/4"
Drive Motor (HP)-4
Weight (LBS.)-6,600
|
|
| Ad # 9452 | Fully Automatic Horizontal Band Saw |
| 96? |
DOALL |
C-4100-NC |
Good |
Sold |
Photo /
More Info. |
| 16in Round or 14 x 16 rectangle: Doall Bandsaw
with 186" Blade
Please verify below std specs..
Max Cutting Capacity
14 in. high x 16 in.wide (355 x 410 mm) rectangles, 16 in.(410 mm) rounds, 14 in. (355 mm) squares
Blade
Band saw blade dimensions 1-1/2 x 186 in. (41 x 4,570 mm)
Band Speed
Infinitely variable band speed drive 40-360 fpm (12-110 m/min)
Motor Capacity
Total motor capacity 12.2-hp (9.1 kw)
Band Drive
Band drive 10-hp (7.5 kw)
Hydraulics
Hydraulic system 2-hp (1.5 kw)
Band Wheels
Wheel diameter 21 in. (535 mm)
Coolant Pump
Coolant pump 1/10-hp (.075 kw)
Min Butt End
Min. butt end with automatic feed 3 in. (75 mm)
Pass Line Height
(minimum) 30-1/2 in. (775 mm)
Index Length, Single
Single automatic index length 24 in. (610 mm)
Color
DoALL Blue
Index Length, Min
Min. automatic index length 1/4 in. (6 mm)
Includes the following standard Equipment
Spring-loaded, zero clearance, carbide-faced saw guide with lead-in roller on both guide arms
Powered chip conveyor to discharge chips
Chip shovel
Coolant system integral coolant pump, coolant applied through saw guides
Flushing hose
Band door interlocks
Minimum bar end vise
Worklight mounted on control panel (60 Hz machines only)
Idler wheel motion detector stops machine automatically if band stalls in workpiece
Variable vise pressure control, with gages located by operator’s control console
Transmission oil
Random cut positioning
Rapid travel index vise control
Programmable cut length with digital readout
Complimentary coolant package
Power driven band clearing brush
Automatic workheight sensor
Blade guard
Band speed control and display at operator’s control panel
Out of stock sensor
Automatic band-kerf compensator
Saw head-rapid approach control
Instruction and parts manual
ATF hydraulic oil for wide-range temperature applications
Job selector
|
|
| Ad # 1726 | Cold Saws & Power Hack Saws |
| — |
KELLER |
3HA |
Good |
SOLD |
Photo /
More Info. |
| 8" POWER HACK SAW: 8" ROUND CAPACITY
12-14INCH BLADE LENGTH
VARIABLE SPEED 50 - 350
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5008 | Tool & Cutter Grinders |
| 2003 |
Saacke |
UWIA CNC 5A |
Excellent |
sold 157,950 |
Photo /
More Info. |
| SAACKE--CNC Tool & Cutter GRINDER: This tool & cutter Grinder Machine-with continous
path, 5 axis-X, Y, Z, A, B control
Control: Num 1050with PC fitted for wet grinding
Software: Numroto-Plus PC absolute programming
W/ windows 98 The controls are Numroto Plus, HP-
10.5. 512 K Along with software Packages as
follows Pkg # 150622 Drill point, 150625 step
faces & step drills, # 150630 Profile-form steps, #
1503827 Grinding flutes drills, step drills, &
subland, # 15335 Profile-form cutters
Will Do: Drill points, Helical profile, S-form, 4 face
point W/ straight & s form chisel edge, complete
gashing, flute orientation : right hand cutting &
right helix, left hand cutting & left helix, & mixed,
step face drills, flute drills, ,step drills, & subland
step drills, 10 steps max, form cutters, face form
flat,
Work Area: 6" height of centers x 6" max tool dia
Grinding table: X travel-13"
table speed adjustable up to 394IMP
usable table area: 3.25 x 5.125 "
cross travel Z stroke-10.25"
vert stroke travel-8.25"
guideways-roller
Turret Grinding = swivel in horiz plane B axis
Torsion speed 180 deg / sec
drive motor spindle: 9.4HP orginally upgraded to
11HP
Will grind up to 11-1/4" flute length upgrade done
Has all collets and chucks
memory
software windows 98 w/ siemens drives
Renishaw 3 D measuring probe-fixed at grinding
head modified with saacke stylus for tool length ,
flute orientation & and lead of cutting tools
Auto lube system
floor space: 77 x 90"
Direct drive headstock-600RPM max-liqued
coolescan be used to cylindrical grinding
co2 fire interface
paper band filter
The cutting length is max. tool dia.,
6 1/2",travel X-axis- 13", Y-axis-8 1/4", Z-axis-10
5/8"
8 wheel hubs,
special draw bar for cat V50 & NMTB 50 holders
Lyndex & Nikkon chucks & holders
LSK 10 plus 14 collets .118-,393, LSK 16plus12
collets for .393 to .629 & LSK 25 plus 19 collets
.629-1" all with spanner wrenches
Also Ultra Lock Chuck 1.25 # C50UMC1250L
Lyndex chuck 150TG C5017-1500 w collets &
spanner
2" end mill holders # 50NMTB
2" end mill holder W/ # 50cat taper x 51/4 long
both spindles have been rebuilt by Setco &
balanced
Trion Air Boss Mist collector # MP1200M-1HP
Also incldes 8 diamond wheels various sizes
10 Borazon wheels various sizes
18 dressing sticks..
extended tool length holders,
50 taper Holders max length 11.5" includes Lydex &
Nikken holders,
Cylindrical Grinder workhead included-for step
tools
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 1743 | Initial Pinch & Pyramid Type Plate Bending Rolls |
| 1995 |
Round O/Comec |
PS - 255 |
Very Good |
Sold |
Photo /
More Info. |
| ROUND- 0 PYRAMID ROLLER 8ft x 9/16in cap: 9/16" x 8' Capacity
Hydraulic
Independent Powers Rolls
Independent Roll Set
Cone roll Attachment with 10" Rollers
Angle Roll Attachment
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 13225 | Roll Formers: Angle/Profile Bending Rolls |
| 2007 |
AKYAPAK |
APK-101 |
Good |
sold |
Photo /
More Info. |
| 4": Akyapak # APK-101 angle roll former
Shaft diameter 100 mm
Rolls diameter 300 mm
Motor Power 11 kw
Roll Type: Rolls, Angle Bending
Manufacturer: AKYAPAK
Model: APK-100
Angle Capacity: 4" / 101.6 mm
Angle Capacity: 4" / 101.6 mm
Angle Capacity: 0.500 " / 12.7 mm
Revolution 7 rev-min
made in turkey
Shaft Recently Rebuilt
basic tooling included -flat
bar,angle
iron & channel
STANDART EQUIPMENTS " Machine body is
steel
(St-
52)
construction." On APK 101 and APK 121
rolls are
driven by
hydraulic motor+planetry gearbox and
gears."
Hardened
rolls."
Shafts made of special steel (42 CrMo4),
hardened and
grounded." On APK 101 side guide rolls are
in
one direction
manual adjustable." APK 121 side guide
rolls
are
in two
directions hydraulic adjustable."
Horizontal
working." Torque
limiting device protectinSPECIAL
EQUIPMENTS "
Special
rolls
for tubes, profiles and angles." Digital
display
for hydraulic
guide rolls." Hydraulic adjustable guide
rolls
in two directions."
Variable speed of rotation." Special
tooling
sysems for
bending
U-I-H profiles." Spiral bending device."
NC
Playback Control
System." CNC Graphic Control System."
Digital
Readout for
profile position indication.g from
overload
during bending."
Lower rolls hydraulic moveable up and
down."
Digital display
for lower rolls." Separate and moveable
control
panel."
Electrical and hydraulic protection
against
overloads." Manual
lubrication" Suitable for CE |
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 10623 | Plasma |
| 1995 |
MG Industry |
MMIA |
Very Good |
sold |
Photo /
More Info. |
| 6' x 20' table, cuts up to 3/4" steel: The Plasma Cutter was up graded from a 1070 Hypertherm control-70 watts to ... |
|
| Ad # 12400 | Laser |
| 1996 |
Balliu |
LC1500 |
Good |
sold |
Photo /
More Info. |
| 126 x 60" ---1/2" thick: Balliu LC1500 laser cutter
Type of command CNC: Siemens
Longitudinal travel X-axis: 3100 mm / 126"
Cross travel Y-axis: 1500 mm/ 60"
Height trvel Z-axis: 250 mm/ 9.8"
Max cutting thickness in steel: 15 mm / 1/2"
plus
material shuttle / feed system includedMaximum
Laser Capacity 2200 Watt
less than 15,000 hrs total on machine
machine not currently under power
loading fee approx 1700.00
floor space needed 20' x 30'
Note:machine ran well when taken out of service
and was lubricated and alighned at that time
We also have a step up transformer to run off
230/3 included with machine
Owner needs the room thats why priced so low..
Note this machine may need a little TLC to run
again because it has been sitting for a few years
but ran well when taken out of service
Rigging/loading onto flatbed truck fee:$ 1800.00 |
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
