|
User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Mills & Machining Centers
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1992 Make - DAEWOO ( TOSHIBA ) Model - BMC80 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 3068 , Year = 1992 , Make = DAEWOO ( TOSHIBA ) , Model = BMC80 | 
|
|
Category: Horizontal Machining Centers (HMC)
|
Capacity: DAEWOO ( TOSHIBA ) CNC HORIZONTAL MACHINING CENTER
|
| Ad #
3068 |
| Year:
| 1992
|
| Make:
| DAEWOO ( TOSHIBA )
|
| Model:
| BMC80
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | On showroom floor
|
| Shipping Info: | We can load
|
| Weight: | 34175 LBS.
|
| Dimension: L x W x H | 276 X 168 X 159 |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- TRAVEL ( X ) ------------------ 63"
TRAVEL ( Y ) ------------------ 35.4"
TRAVEL ( Z ) ------------------ 39.4"
PALLET SIZE ( 2 PALLETS ) ---------- 31.5" X 31.5"
PALLET INDEXING ------------------ 1 DEG.
SPINDLE TAPER ---------------------#50 ISO
PALLET CAPACITY ------------------ 3300 LBS.
TOOL STORAGE CAPACITY ------------ 45 TOOLS
SPINDLE SPEED RANGE -------------- 20 TO 4500 RPM
MAIN DRIVE MOTOR - ( CONT./30 MIN. ) 20 / 15 HP
|
| Comments: |
- Control: Tosnuc 600-M
45 STATION AUTOMATIC TOOL CHANGER
2 PALLET AUTOMATIC PALLET SHUTTLE
CHIP CONVEYOR
MISCELLANEOUS TOOL HOLDERS
FULL GUARDING
BUILT BY DAEWOO UNDER LICENSING AGREEMENT FROM TOSHIBA
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1980 Make - ELDORADO Model - M75 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 3073 , Year = 1980 , Make = ELDORADO , Model = M75 |
|
|
Category: Gun / Deep Hole Drills
|
Capacity: 3/4" X 30" ELDORADO #M75 SINGLE SPINDLE GUN DRILL
|
| Ad #
3073 |
| Year:
| 1980
|
| Make:
| ELDORADO
|
| Model:
| M75
|
| Condition:
| Needs Work
|
| Serial #:
| On Request
|
|
| Machine Status: | On showroom floor
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- DRILLING CAPACITY ---------- .0550 TO .75" DIA.
MAXIMUM STROKE ------------- 30"
TABLE SIZE ------------------ 22" X 22"
FEED RATE ---- ( VARIABLE ) - .1 TO 99.9 IPM
SPINDLE SPEEDS -------------- 1455 TO 11,740 RPM
COOLANT PRESSURE CAPACITY ----1500 PSI
COOLANT TANK CAPACITY ------- 90 GALLONS
COOLANT PUMP OUTPUT --------- 18 GPM
FILTRATION ------------------- 5 MICRON
SPINDLE DRIVE -----------------3 HP 208/230/460/3/60
|
| Comments: |
- BALL SCREW DRIVE
#F18 HI PRESSURE COOLANT SYSTEM
TACHOMETER
++needs coolant pump and 2 boards replaced
|
|
|
We found 6 matching ads. Now displaying the remaining 6 ads.
| FOR SALE: Year - 1999 Make - WILTON/MEP Model - TIGER 350 CNC-FE |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 5500 , Year = 1999 , Make = WILTON/MEP , Model = TIGER 350 CNC-FE |
|
|
Category: Cold Saws & Power Hack Saws
|
Capacity: WILTON/MEP 14" CNC AUTOMATIC FERROUS COLD SAW
|
| Ad #
5500 |
| Year:
| 1999
|
| Make:
| WILTON/MEP
|
| Model:
| TIGER 350 CNC-FE
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 1400 LBS
|
| Dimension: L x W x H | 66 X 36 X 84 |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- MAXIMUM BLADE SIZE ------------------------ 14"
BLADE SPEEDS --- ( 4 ) ----------- 15/30/45/90 RPM
VISE OPENING, MAXIMUM ------------------ 7-7/16"
CUTTING CAPACITIES, 90 DEG.:
ROUND ---------------------------- 4-11/16"
SQUARE --------------------------- 3-15/16"
RECTANGULAR ---------------------- 7" X 3-15/16"
CUTTING CAPACITIES, 45 DEG.:
ROUND ---------------------- 4-5/16"
SQUARE --------------------- 3-15/16"
RECTANGULAR ---------------- 4-15/16" X 3-15/16"
MOTOR ------------------------ 2.5/3.5 HP 220/3/60
EQUIPPED WITH ---
MEP EVOLUTION CNC CONTROL
BAR FEED WITH BALL SCREW AND D.C. DRIVE
PNEUMATIC VISE
COMB JAWS FOR BUNDLING
VERTICAL HOLDDOWN CLAMP
FOUR SPEED GEARBOX
AUTOMATIC VISE SYSTEM
FLOOD COOLANT
MITER CAPABILITY
FOOT PEDAL CONTROL
VERTICAL COLUMN DESIGN
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1965 Make - TANNEWITZ Model - 3000MH |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 5479 , Year = 1965 , Make = TANNEWITZ , Model = 3000MH |
|
|
Category: Vertical Band Saws
|
Capacity: 30" TANNEWITZ MODEL 3000MH VERTICAL BAND SAW
|
| Ad #
5479 |
| Year:
| 1965
|
| Make:
| TANNEWITZ
|
| Model:
| 3000MH
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 3,200 lbs
|
| Dimension: L x W x H | 60 X 84 X 108 |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- THROAT DEPTH ------------------------------ 30"
TABLE SIZE ---------- 32" X 41" WITH 4 "T" SLOTS
TABLE TILTS
VERTICAL CAPACITY ------------------------- 14"
VARIABLE SPEED RANGE ------------- 45 TO 9000 FPM
HYDRAULIC TABLE FEED
MAIN DRIVE MOTOR ----------------- 7.5 HP 440 VOLT
LENGTH OF BLADE -------------------- 17'
|
|
|
| FOR SALE: Year - 1982 Make - ARMSTRONG BLUM/ MARVEL Model - 81A9/M4A |
|---|
| FOR SALE: Ad # 5481 , Year = 1982 , Make = ARMSTRONG BLUM/ MARVEL , Model = 81A9/M4A |
|
|
Category: Tilt Frame Vertical Band Saw
|
Capacity: 18" X 20" ARMSTRONG BLUM "MARVEL" AUTOMATIC VERTICAL BAND SAW
|
| Ad #
5481 |
| Year:
| 1982
|
| Make:
| ARMSTRONG BLUM/ MARVEL
|
| Model:
| 81A9/M4A
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 8,000 lbs
|
| Dimension: L x W x H | 182 X 108 X 95 |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- CAPACITY ------------------ 18" WIDE X 20" HIGH
45 DEG. ANGLE LEFT -------- 18" X 11-1/2"
45 DEG. ANGLE RIGHT ------- 18" X 13-1/2"
BLADE SIZE ---------------- 15'6" X 1-1/4" X .042"
WORKING SURFACE OF TABLE -- 30" X 33"
VISE OPENS MAXIMUM -------- 21-1/2"
STANDARD BLADE SPEED VARIABLE ----- 60 TO 400 FPM
SHUTTLE TRAVEL OF FEED TABLE AT ONE SETTING - 24"
MAIN DRIVE MOTOR --------------- 10 HP A.C.
EQUIPPED WITH ---
10' AUTOMATIC INFEED TABLE WITH VISES
MULTI CYCLE UP TO 19 CYCLES
COOLANT SYSTEM
PIECE COUNTER
HYDRAULIC VISES
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1951 Make - DoAll Model - V-60 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 5478 , Year = 1951 , Make = DoAll , Model = V-60 |
|
|
Category: Vertical Band Saws
|
Capacity: DOALL MODEL V60 CONTOURING VERTICAL BAND SAW
|
| Ad #
5478 |
| Year:
| 1951
|
| Make:
| DoAll
|
| Model:
| V-60
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 4,500 lbs
|
| Dimension: L x W x H | 112 X 53 X 88 |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- THROAT DEPTH ------------------------------ 60"
MAXIMUM WORK THICKNESS CAPACITY ----------- 12"
TABLE SIZE ----------------- 30" X 30" X 2-1/4"
DISTANCE TABLE TO FLOOR -------------- 44"
TABLE TILT, UNIVERSAL SWIVEL ---- 35 DEG. FORWARD
TABLE TILT, UNIVERSAL SWIVEL - 10 DEG. TO BOTH SIDES & REAR
WHEEL DIAMETER ------------------------- 26"
UPPER WHEEL ADJUSTMENT ----------------- 5-3/4"
SAW LENGTH ----------------------------- 254"
FILE BAND LENGTH --------------------- 249"
CUTTING SPEED ------------------ 50 TO 1500 FPM
EQUIPPED WITH ---
POWER FEED
BLADE WELD/GRINDING ATTACHMENT
CHIP CHUTE
JOB SELECTOR
WORK LIGHT
SPEED REGULATOR
SPEED INDICATOR
|
|
|
| FOR SALE: Year - 1989 Make - Roll In Model - EF |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 5485 , Year = 1989 , Make = Roll In , Model = EF |
|
|
Category: Vertical Band Saws
|
Capacity: ROLL IN MODEL EF VERTICAL BAND SAW
|
| Ad #
5485 |
| Year:
| 1989
|
| Make:
| Roll In
|
| Model:
| EF
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 650 lbs
|
| Dimension: L x W x H | 46 X 31 X 68 |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- CAPACITY, BLADE TO COLUMN -------------- 8.25"
MAXIMUM CLEARANCE UNDER GUIDES --------- 14.5"
TABLE SIZE ------------------------ 18" X 30"
BLADE WIDTH ------------------- .25" TO .75"
BLADE LENGTH -------------------- 120"
BLADE SPEED FPM ----------- 70, 140, 270, 525
MAIN DRIVE MOTOR --------- 3/4 HP 208-220/1/60
EQUIPPED WITH ---
ROLL-IN FEED SYSTEM
HYDRAULIC FEED CONTROL
COUNTERWEIGHT PRESSURE CONTROL
PORTABLE
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1957 Make - GROB Model - 2S-36-U |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 5480 , Year = 1957 , Make = GROB , Model = 2S-36-U |
|
|
Category: Vertical Band Saws
|
Capacity: 36" GROB VERTICAL BAND SAW
|
| Ad #
5480 |
| Year:
| 1957
|
| Make:
| GROB
|
| Model:
| 2S-36-U
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 4,100 lbs
|
| Dimension: L x W x H | 86 X 64 X 111 |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- THROAT DEPTH ------------------------ 36"
WORK HEIGHT ------------------------ 20"
TABLE SIZE ----------------------- 36" X 36"
BLADE SIZE ----- ( WIDTH ) -------- 1/8" TO 1-1/4"
BLADE SIZE ----- ( LENGTH ) --------- 242" TO 252"
TABLE TILTS --------- 45 DEG. RIGHT, 15 DEG. LEFT
BLADE SPEED ---- ( VARIABLE ) --- 40 TO 15,000 RPM
MAIN DRIVE MOTOR ------------ 15/10 HP A.C.
EQUIPPED WITH ---
BLADE WELDER/GRINDER
EXTRA BLADE
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - 1993 Make - JONES & SHIPMAN Model - 8 x FORMAT 5/200 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 5301 , Year = 1993 , Make = JONES & SHIPMAN , Model = 8 x FORMAT 5/200 |
|
|
Category: Surface Grinders
|
Capacity: 8" X 24" JONES & SHIPMAN CNC SURFACE GRINDER
|
| Ad #
5301 |
| Year:
| 1993
|
| Make:
| JONES & SHIPMAN
|
| Model:
| 8 x FORMAT 5/200
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 3,369 lbs
|
| Dimension: L x W x H | 64"(LR) X 57"(FB) X 76"(H) |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- WORKING SURFACE OF TABLE ------ 8" X 24"
LONGITUDINAL TRAVERSE ( HYDR./HAND ) ------ 25/26"
TABLE CROSS TRAVERSE ----------------------
DISTANCE WHEEL TO TABLE, MAX. ------------- 15.4"
TABLE JOG RATE --------------------- 3 - 20 FPM
WHEEL SIZE, STANDARD -------------- 10" X 1" X 3"
GRINDING WHEEL SPEED ------------ 2,640 RPM
MINIMUM PROGRAMMABLE CROSSFEED INCREMENT -- .0001"
MINIMUM PROGRAMMABLE WHEELHEAD INCREMENT -- .0001"
WHEELHEAD AND CROSSFEED RATES -- .006 TP .120 IPM
WHEELHEAD MOTOR ----------------- 3 HP A.C.
EQUIPPED WITH ---
ALLEN BRADLEY 8600 CNC CONTROL
D.C. SERVO MOTOR DRIVEN BALLSCREWS WITH LINEAR SCALE FEEDBACK ( Y & Z AXES )
USER FRIENDLY DISPLAYS OF GRINDING AND DRESSING CYCLES
BALL BEARING WHEELHEAD
BALL AND ROLLER SLIDE WHEELHEAD ASSEMBLY
8" X 24" WALKER FINE LINE ELECTRO MAGNETIC CHUCK AND WALKER VARIABLE CONTROL
TABLE MOUNTED FLIP-UP DRESSER
COOLANT SYSTEM
|
| Comments: |
- OPTIONAL 1YR EXTENDED WARRANTY AVAILABLE AT ADDITIONAL COST; CONTACT US FOR DETAILS
|
|
|
| FOR SALE: Year - 1972 Make - MOORE Model - #3 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 3080 , Year = 1972 , Make = MOORE , Model = #3 |
|
|
Category: Jig Grinders
|
Capacity: MOORE #3 PRECISION JIG GRINDER
|
| Ad #
3080 |
| Year:
| 1972
|
| Make:
| MOORE
|
| Model:
| #3
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 3800 LBS.
|
| Dimension: L x W x H | 80 X 65 X 102 |
Machine Location:
|
| City: |
On Request
|
| State: |
Michigan
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- TABLE WORK CAPACITY ------------ 11" X 24"
TABLE TRAVEL ----- ( LONGITUDINAL ) ------- 18"
TABLE TRAVEL ----- ( CROSS ) -------------- 11"
VERTICAL TRAVEL OF SPINDLE HOUSING ---- 12-5/8"
VERTICAL SPINDLE TRAVEL ----------- 3-5/8"
TABLE TOP TO WHEEL COLLET, ADJUSTABLE - 2" TO 18"
SPINDLE SPEEDS, INFINITELY VARIABLE 40 TO 250 RPM
SPINDLE FEEDS, INFINITELY VARIABLE 4 TO 240 CPM
GRINDING CAPACITY WITH OPTIONAL EXT. PLATES 1/64 TO 3-1/2
( UP TO 13-1/2" )
GRINDING WHEEL SPEEDS WITH OPTIONAL HEADS 6000 TO 175,000 RPM
|
| Comments: |
- 2 GRINDING HEADS
1) 40,000 rpm
2) 60,000 rpm
SLOT GRINDING HEAD
10" MOORE PRECISION ROTARY TABLE
Note: This is a metric machine
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - 1960 ? Make - PACIFIC Model - 375S14ARH |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 5501 , Year = 1960 ? , Make = PACIFIC , Model = 375S14ARH |
|
|
Category: Power Squaring Shear (Hydraulic)
|
Capacity: 5/8" X 14' PACIFIC MODEL 375S14ARH HYDRAULIC PLATE SHEAR
|
| Ad #
5501 |
| Year:
| 1960 ?
|
| Make:
| PACIFIC
|
| Model:
| 375S14ARH
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | 189 X 89 X 111 |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- CAPACITY IN MILD STEEL ----------- 5/8" X 14'
RATED RAKE ANGLE ----------------- 5/16" PER FOOT
MAXIMUM RAKE ANGLE --------------- 1/2" PER FOOT
DISTANCE BETWEEN HOUSINGS -------- 14'3"
WORKING HEIGHT AT TABLE -------------- 34-3/4"
THROAT DEPTH --------------------------- 18"
HYDRAULIC SYSTEM MOTOR ---------------- 30 HP A.C.
MACHINE REQUIRES PIT FOR LOWER APRON - 4-3/4" DEEP
EQUIPPED WITH ---
48" FRONT OPERATED POWER BACK GAUGE
(2) FRONT SUPPORT ARMS
POWER RAKE ADJUSTMENT
ELECTRIC FOOT SWITCH
HYDRAULIC HOLDDOWNS
BLADE AND HOLDDOWN COVER
PUSHBUTTON CONTROLS
SELF CONTAINED HYDRAULIC SYSTEM
BLADE CLEARANCE ADJUSTMENT
BALL TRANSFERS BUILT INTO BED
PLANT OWNED, CAN BE SHOWN IN OPERATION
|
| Comments: |
|
|
|
|
| FOR SALE: Year - 1988 Make - DARLEY Model - S1250-4 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 3057 , Year = 1988 , Make = DARLEY , Model = S1250-4 |
|
|
Category: Power Squaring Shear (Hydraulic)
|
Capacity: 4' X 10 GA. DARLEY HYDRAULIC SHEAR
|
| Ad #
3057 |
| Year:
| 1988
|
| Make:
| DARLEY
|
| Model:
| S1250-4
|
| Condition:
|
|
| Serial #:
| On Request
|
|
| Machine Status: |
|
| Shipping Info: | We can load
|
| Weight: | 4200 LBS.
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- CAPACITY THICKNESS, MILD STEEL ------------ 4 MM ( .1575" )
CAPACITY THICKNESS, STAINLESS STEEL ------- 3 MM ( .1181" )
STROKES PER MINUTE ------------------------ 51
CAPACITY LENGTH --------------------------- 50"
NUMBER OF HYDRAULIC HOLDDOWNS ------------- 7
MAIN DRIVE MOTOR -------------------------- 10 HP A.C.
EQUIPPED WITH ---
24" PROGRAMMABLE BACK GAUGE
40" SQUARING ARM
FRONT ARM
ELECTRIC FOOT CONTROL
|
|
|
We found 9 matching ads. Now displaying the remaining 9 ads.
| FOR SALE: Year - 1974 Make - DIACRO Model - 16-96 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 5495 , Year = 1974 , Make = DIACRO , Model = 16-96 |
|
|
Category: Press Brakes (Hydraulic)
|
Capacity: 35 TON, 8' DIACRO HYDRA-MECHANICAL PRESS BRAKE
|
| Ad #
5495 |
| Year:
| 1974
|
| Make:
| DIACRO
|
| Model:
| 16-96
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 5550 LBS
|
| Dimension: L x W x H | 98 X 42 X 92 |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- LENGTH OF BED & RAM ----------------------- 96"
DISTANCE BETWEEN HOUSINGS ----------------- 62"
CAPACITY -------- ( MILD STEEL ) ---- 96" X 16 GA.
STROKE OF RAM ----------------------------- 2"
SHUT HEIGHT RAM UP, STROKE DOWN ----------- 9"
RAM ADJUSTMENT ---------------------------- 3"
THROAT CLEARANCE FROM CENTER OF DIES ------ 9"
MAIN DRIVE MOTOR ------------------- 3 HP A.C.
EQUIPPED WITH ---
HURCO AUTOBEND IV CNC BACK GAUGE WITH 24" RANGE
STROKE ADJUSTMENT
COMPLETE HYDRAULIC SYSTEM
LOWER & TOP DIE HOLDERS
FOOT PEDAL CONTROL
|
|
|
| FOR SALE: Year - 1996 Make - LDV Model - PPEB350/14 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 5491 , Year = 1996 , Make = LDV , Model = PPEB350/14 |
|
|
Category: Press Brakes (Hydraulic)
|
Capacity: 350 TON 177" BED LVD CNC HYDRAULIC PRESS BRAKE
|
| Ad #
5491 |
| Year:
| 1996
|
| Make:
| LDV
|
| Model:
| PPEB350/14
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 52900 LBS
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- FEATURING FLUSH FLOOR DESIGN, 6 AXIS CNC GAUGING, HYDRAULIC DIE CLAMPS
CAPACITY ---------------------- 350 TONS
OVERALL LENGTH OF BED AND RAM ------------- 177"
DISTANCE BETWEEN HOUSINGS ----------------- 136"
STROKE OF RAM, MAXIMUM -------------------- 21.6"
MAXIMUM DISTANCE TABLE TO RAM ------------- 27.55"
THROAT DEPTH ------------------------------ 13.7"
WIDTH OF BED TOP -------------------------- 8.2"
SPEEDS, APPROACH ----------------- 3.93 IN./SEC.
SPEEDS, WORKING ------------------ .33 IN./SEC.
SPEEDS, RETURN -------------------- 3.4 IN./SEC.
MAIN DRIVE MOTOR -------------- 48 HP A.C.
EQUIPPED WITH ---
LVD #MNC95/C 6 AXIS CNC GAUGING SYSTEM
HYDRAULIC DIE CLAMPING
LIGHT CURTAINS ( AS-IS )
FLUSH FLOOR DESIGN
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1963 Make - PACIFIC Model - 150-12 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 5496 , Year = 1963 , Make = PACIFIC , Model = 150-12 |
|
|
Category: Press Brakes (Hydraulic)
|
Capacity: 150 TON, 12' PACIFIC HYDRAULIC PRESS BRAKE
|
| Ad #
5496 |
| Year:
| 1963
|
| Make:
| PACIFIC
|
| Model:
| 150-12
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 21000 LBS
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- CAPACITY -------------------------- 150 TONS
OVERALL LENGTH OF BED & RAM --------------- 12'
DISTANCE BETWEEN HOUSINGS ----------------- 8'5"
BENDING CAPACITY, MILD STEEL ---------- 10' 3/16"
STROKE OF RAM ----------------------------- 10"
OPEN HEIGHT ------------------------------- 15"
CLOSED HEIGHT ----------------------------- 5"
THROAT DEPTH ------------------------------ 6-3/4"
PIT REQUIRED FOR BED EXTENSION
BELOW FLOOR --- ( L x W x D ) ----- 10" X 2" X 16"
MAIN DRIVE MOTOR ------------------- 15 HP A.C.
OVERALL HEIGHT ---------------------------- 104"
( EXCLUDING 16" BELOW FLOOR SECTION )
EQUIPPED WITH:
UPPER DIE CLAMPS
LOWER DIE CLAMP
ELECTRIC CONTROL PEDAL
TONNAGE CONTROL
REMOVABLE RAM AND BED ANGLES
|
|
|
| FOR SALE: Year - 1986 Make - LDV Model - 55-BH-08N |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 5490 , Year = 1986 , Make = LDV , Model = 55-BH-08N |
|
|
Category: Press Brakes (Hydraulic)
|
Capacity: 55 TON LVD CNC HYDRAULIC PRESS BRAKE
|
| Ad #
5490 |
| Year:
| 1986
|
| Make:
| LDV
|
| Model:
| 55-BH-08N
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 7500 LBS
|
| Dimension: L x W x H | 102 X 72 X 96 |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- TONNAGE CAPACITY ------------------ 55 TONS
OVERALL WORK LENGTH ----------------------- 100"
DISTANCE BETWEEN HOUSINGS ----------------- 80"
RAM STROKE ----------- ( MAXIMUM ) -------- 4"
RAM ADJUSTMENT ---------------------------- 3"
MAXIMUM DISTANCE BETWEEN BED AND RAM ------ 12"
DEPTH OF GAP ------------------------------ 8"
WIDTH OF BED ------------------------------ 5-
1/2"
MAIN DRIVE MOTOR ------------- 4 KW 230/460/3/60
EQUIPPED WITH ---
MNC 800 CNC BACK GAUGE WITH 30" RANGE
LOWER DIE HOLDER
UPPER DIE HOLDER
PEDESTAL CONTROL STATION WITH DUAL PALM & FOOT
CONTROL
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1977 Make - DIACRO Model - 55-10 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 5489 , Year = 1977 , Make = DIACRO , Model = 55-10 |
|
|
Category: Press Brakes (Hydraulic)
|
Capacity: 55 TON DIACRO HYDRA-MECHANICAL PRESS BRAKE
|
| Ad #
5489 |
| Year:
| 1977
|
| Make:
| DIACRO
|
| Model:
| 55-10
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 11800 LBS
|
| Dimension: L x W x H | 124 X 66 X 105 |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- LENGTH OF BED & RAM ----------------------- 120"
DISTANCE BETWEEN HOUSINGS ----------------- 102"
CAPACITY ----- ( MILD STEEL ) ------ 120" X 14 GA.
STROKE OF RAM ----------------------------- 3"
SHUT HEIGHT RAM UP, STROKE DOWN ----------- 12"
RAM ADJUSTMENT ---------------------------- 4"
THROAT CLEARANCE FROM CENTER OF DIES ------ 8"
MAIN DRIVE MOTOR ------------- 10 HP 230/460/3/60
EQUIPPED WITH ---
24" CNC BACK GAUGE ( 1 AXIS )
STROKE ADJUSTMENT
COMPLETE HYDRAULIC SYSTEM
LOWER & TOP DIE HOLDERS
FOOT PEDAL CONTROL
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1989 Make - GULFIL Model - PE-25-100 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 5493 , Year = 1989 , Make = GULFIL , Model = PE-25-100 |
|
|
Category: Press Brakes (Hydraulic)
|
Capacity: 110 TON, 100" GUIFIL HYDRAULIC PRESS BRAKE
|
| Ad #
5493 |
| Year:
| 1989
|
| Make:
| GULFIL
|
| Model:
| PE-25-100
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 13230 LBS
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- FEATURING UP-ACTING DESIGN, 2 AXIS CNC BACK GAUGE
CAPACITY, U.S. TONS ------------------ 110 TONS
BENDING LENGTH ---------------------------- 100"
DISTANCE BETWEEN HOUSINGS ----------------- 80"
THROAT DEPTH ------------------------------ 16"
STROKE LENGTH ----------------------------- 18"
SPEED, APPROACH ----------------------- 1.58 IPS
SPEED, BENDING ---------------------- .28 IPS
SPEED, RETURN --------------------- 2.17 IPS
MAIN DRIVE MOTOR ------------------- 10 HP A.C.
EQUIPPED WITH ---
AUTOMEC (AUTOGAUGE CNC 1000) 2 AXIS CNC BACK GAUGE
UPPER DIE CLAMPS
|
|
|
| FOR SALE: Year - 1989 Make - WYSONG Model - H40-72 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 5494 , Year = 1989 , Make = WYSONG , Model = H40-72 |
|
|
Category: Press Brakes (Hydraulic)
|
Capacity: 40 TON x 52" WYSONG ROTARY ACTUATED HYDRA-MECHANICAL PRESS BRAKE
|
| Ad #
5494 |
| Year:
| 1989
|
| Make:
| WYSONG
|
| Model:
| H40-72
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | 64 X 52 X 92 |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- 40 TON WYSONG MODEL H40-72 ROTARY ACTUATED HYDRA-MECHANICAL PRESS BRAKE WITH HURCO AUTOBEND 5C CONTROL
ADJUSTABLE STROKE TO MAXIMUM -------------- 2-1/2"
RAM ADJUSTMENT, MANUAL -------------------- 3"
DIE SPACE --------------------------------- 9"
OVERALL LENGTH OF BED & RAM --------------- 52"
DISTANCE BETWEEN HOUSINGS ----------------- 37"
THROAT DEPTH ------------------------------ 9"
DOWN MOVING RAM
CAPACITY IN MILD STEEL ------------- 4' X 10 GA.
WITH 2" STROKE AND 1/4" PRESS, MAX. SPEED - 20 IPM
HI-LOW CYCLE CONTROL FOR RAPID APPROACH, SLOW PRESS, RAPID RAM RETURN
MOTOR --------------------- 5 HP 208/230/460/3/60
EQUIPPED WITH ---
HURCO AUTOBEND 5C SINGLE AXIS BACK GAUGE WITH 24" RANGE
42" LOWER DIE HOLDER
2 HAND PEDESTAL CONTROL
MANUAL RAM TILTING AND LEVELLING
BIJUR LUBRICATION
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Pacific Model - J55 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 3144 , Year = , Make = Pacific , Model = J55 |
|
|
Category: Press Brakes (Hydraulic)
|
Capacity: Pacific J55 CNC Press Brake
|
| Ad #
3144 |
| Year:
|
|
| Make:
| Pacific
|
| Model:
| J55
|
| Condition:
|
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- 55 Ton Capacity
8' Bed and Ram Length
Automatic CNC Back Gauge
|
|
|
| FOR SALE: Year - 1980 Make - DREIS & KRUMP Model - 1012L |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 3064 , Year = 1980 , Make = DREIS & KRUMP , Model = 1012L |
|
|
Category: Press Brakes (Mechanical)
|
Capacity: 90 TON DREIS & KRUMP MODEL 1012L MECHANICAL PRESS BRAKE
|
| Ad #
3064 |
| Year:
| 1980
|
| Make:
| DREIS & KRUMP
|
| Model:
| 1012L
|
| Condition:
|
|
| Serial #:
| On Request
|
|
| Machine Status: | On showroom floor
|
| Shipping Info: | We can load
|
| Weight: | 15500 LBS.
|
| Dimension: L x W x H | 153 X 60 X 96 |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- TONNAGE CAPACITY: BOTTOM OF STROKE 90 TON
TONNAGE CAPACITY: MID STROKE 60 TON
BENDING CAPACITY, MILD STEEL 5' X 1/4"
BENDING CAPACITY, MILD STEEL 8' X 3/16"
BENDING CAPACITY, MILD STEEL 10' X 10 GA.
OVERALL LENGTH OF BED AND RAM 144"
DISTANCE BETWEEN HOUSINGS 126"
STROKE 3"
RAM ADJUSTMENT, MOTORIZED 4"
STROKES PER MINUTE 40
DIE SPACE, STROKE DOWN, ADJUSTMENT UP 12"
THROAT DEPTH 8"
ALL STEEL CONSTRUCTION
AIR CLUTCH WITH FOOT PEDAL CONTROL
MAIN DRIVE MOTOR 5 HP A.C.
|
| Comments: |
- AUTOMEC "AUTOGAUGE 24" CNC BACK GAUGE UPPER DIE CLAMPS ON RAM
AIR CLUTCH AND BRAKE LOWER DIE HOLDER
SELECT-A-SPEED CLUTCH CONTROL (HI, LO) GRAB BAR ON RAM
DUAL PALM BUTTON CONTROL ONE SHOT LUBRICATION
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1972 Make - ROUNDO Model - R6S |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 5504 , Year = 1972 , Make = ROUNDO , Model = R6S |
|
|
Category: Angle Bending Rolls
|
Capacity: ROUNDO R6S HYDRAULIC ANGLE BENDING ROLL (HORIZONTAL PLANE)
|
| Ad #
5504 |
| Year:
| 1972
|
| Make:
| ROUNDO
|
| Model:
| R6S
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 16300 LBS
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- CAPACITY:
ANGLES, LEG OUT: 5" X 5" X 5/8" TO 65" MIN. DIA.
ANGLES, LEG IN: 5" X 5" X 1/2" TO 90" MIN. DIA.
ANGLES, SMALLEST ANGLE: 1-1/2" X 1-1/2" X 1/4"
FLATS ON EDGE: 1-1/4" X 5" TO 50" MIN. DIA.
FLATS ON FLAT: 1-1/2" X 10" TO 50" MIN. DIA.
ROUND BAR CAPACITY ---------------- 3-1/2" DIA.
I-BEAMS AND CHANNELS -------------- 12"
DIAMETER OF BENDING ROLLS ---------- 17-3/8"
SPEEDS ------------- INFINITELY VARIABLE
MAIN DRIVE MOTOR ------------------ 23 HP A.C.
EQUIPPED WITH ---
3 ROLL DRIVE
HYDRAULICALLY ADJUSTABLE GUIDE ROLLS
HYDRAULIC DRIVE
DOUBLE PINCH TYPE - PREBEND
MISCELLANEOUS DIES
|
| Comments: |
- BENDS IN HORIZONTAL PLANE
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - 1982 Make - MUBEA Model - HIW600 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 5498 , Year = 1982 , Make = MUBEA , Model = HIW600 |
|
|
Category: Ironworkers
|
Capacity: 66 TON MUBEA HYDRAULIC IRONWORKER
|
| Ad #
5498 |
| Year:
| 1982
|
| Make:
| MUBEA
|
| Model:
| HIW600
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 2490 LBS
|
| Dimension: L x W x H | 48 X 24 X 82 |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- PUNCH CAPACITIES:
TONS ------------------------------------ 66
DIAMETER THRU THICKNESS ----- 1-1/8" THRU 11/16"
DIAMETER THRU THICKNESS ----- 15/16" THRU 7/8"
THROAT DEPTH ------------------------------ 10"
LENGTH OF STROKE -------------------------- 4"
SHEARING CAPACITIES:
ANGLES, 90 DEGREE --------------- 5" X 5" X 1/2"
ROUND BARS ------------------------------ 1-3/8"
SQUARE BARS ----------------------------- 1-1/4"
FLAT BARS ------------------------- 8" X 1"
FLAT BARS ------------------------- 18" X 1/2"
MAIN DRIVE MOTOR --------------------- 10 HP A.C.
EQUIPPED WITH ---
2 SLIDES
5 WORK STATIONS
COPER/NOTCHER
2 FOOT CONTROLS
|
|
|
| FOR SALE: Year - 1974 Make - MUBEA Model - "OPTIMA" 48-4 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 5497 , Year = 1974 , Make = MUBEA , Model = "OPTIMA" 48-4 |
|
|
Category: Ironworkers
|
Capacity: 48 TON MUBEA "OPTIMA" 48-4 UNIVERSAL MECHANICAL IRONWORKER
|
| Ad #
5497 |
| Year:
| 1974
|
| Make:
| MUBEA
|
| Model:
| "OPTIMA" 48-4
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 2800 LBS
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- WITH 3 CLUTCHES
PUNCHING CAPACITY -------------- 48 TONS
1-1/8" THRU 1/2"
1" THRU 9/16"
THROAT DEPTH ---------------------- 12-5/8"
SECTION SHEAR:
4" X 4" X 3/8" ANGLES AT 90 DEG.
2-1/2" X 2-1/2" X 5/16" ANGLES AT 45 DEG.
3-1/2" X 3/8" TEES
PLATE SHEAR WITH STANDARD 2-1/2 DEG. BLADE:
7-1/2" X 5/16"
3-1/2" X 1/2"
BAR SHEAR:
ROUND 1-3/8"
SQUARE 1-1/4"
COPER NOTCHER:
REGULAR COPING, ANGLES 3" X 5/16"
TRIANGULAR NOTCHING, ANGLES 2-1/2" X 5/16"
STROKES PER MINUTE ------------------------ 55 SPM
MOTOR -------------------------- 2 HP 220/3/60
EQUIPPED WITH ---
EXTRA BLADES AND BIG ASSORTMENT OF PUNCHES
|
| Electrical Description |
|
|
| Comments: |
- PRELIMINARY SPECIFICATIONS SUBJECT TO VERIFICATION AND CHANGE.
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - 1967 Make - WHITNEY Model - 58 |
|---|
| FOR SALE: Ad # 5487 , Year = 1967 , Make = WHITNEY , Model = 58 |
|
|
Category: Manual Arbor Press
|
Capacity: 5 TON WHITNEY MODEL 58 FOOT OPERATED PRESS
|
| Ad #
5487 |
| Year:
| 1967
|
| Make:
| WHITNEY
|
| Model:
| 58
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 430 lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- THROAT DEPTH ------------------------------ 18"
HEIGHT OF THROAT -------------------------- 6-3/4"
LENGTH OF STROKE -------------------------- 1"
STROKE ADJUSTMENT ------------------------- 3/4"
DIE SPACE, STROKE DOWN, ADJUSTMENT UP
FROM BED OF PRESS ----------------------- 5"
DIAMETER OF PUNCH SHANK HOLE IN RAM ------- 1"
|
|
|
| FOR SALE: Year - Make - DAKE Model - # 2 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 5486 , Year = , Make = DAKE , Model = # 2 |
|
|
Category: Manual Arbor Press
|
Capacity: 6 TON DAKE COMPOUND LEVERAGE BENCH TYPE ARBOR PRESS
|
| Ad #
5486 |
| Year:
|
|
| Make:
| DAKE
|
| Model:
| # 2
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 260 lbs
|
| Dimension: L x W x H | 20 X 9 X 26 |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- CAPACITY ----------------------------- 6 TONS
LEVERAGE RATIO ----------------------- 66:1
RAM SIZE ------------------- 1-1/2" X 1-1/2" X 19"
MAXIMUM DIAMETER WORK ------------- 15-1/2"
THROAT ------------------------------- 7-3/4"
LARGEST ARBOR ------------------------ 3"
MAXIMUM HEIGHT RAM TO TABLE ----------- 15"
MAXIMUM HEIGHT RAM TO TABLE PLATE ---- 13-3/4"
BASE -------------------------- 20" X 8-1/4"
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1999 Make - STARRETT "PREMIS" Model - HGDC2424-18 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 3072 , Year = 1999 , Make = STARRETT "PREMIS" , Model = HGDC2424-18 |
|
|
Category: Coordinate Measuring Machine, (CMM)
|
Capacity: STARRETT "PREMIS" CNC COORDINATE MEASURING MACHINE
|
| Ad #
3072 |
| Year:
| 1999
|
| Make:
| STARRETT "PREMIS"
|
| Model:
| HGDC2424-18
|
| Condition:
|
|
| Serial #:
| On Request
|
|
| Machine Status: | On showroom floor
|
| Shipping Info: | We can load
|
| Weight: | 1500 LBS.
|
| Dimension: L x W x H | 39 X 50 X 95 |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- MEASURING MODES --- CNC AUTOMATIC OR JOYSTICK CONTROL
MEASURING RANGE --- ( X ) ------- 24"
MEASURING RANGE --- ( Y ) ------- 24"
MEASURING RANGE --- ( Z ) ------- 18"
VOLUMETRIC ACCURACY,
BAND WIDTH IN BALLBAR LENGTH 12" --- .0003"
REPEATABILITY ( BAND WIDTH ) --------- .0001"
MAXIMUM VELOCITY ------------------- 12" PER SEC.
MAXIMUM ACCELERATION --------- 31.5" PER SEC./SQ.
TABLE WORKING CAPACITY --- 32"L X 28"W X 20"H
|
| Comments: |
- RENISHAW PH9A PROBE
RENISHAW SCR200 6 POSITION STYLUS CHANGER
JOYSTICK CONTROLLER
APOGEE 2-60-006 SOFTWARE - UPDATED 2003
|
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
| FOR SALE: Year - 1974 Make - ROTOFINISH Model - ST-60SA |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 5511 , Year = 1974 , Make = ROTOFINISH , Model = ST-60SA |
|
|
Category: Vibratory Equipment
|
Capacity: 60 CU FT. ROTOFINISH SPIRATRON BOWL TYPE VIBRATORY FINISHING MACHINE
|
| Ad #
5511 |
| Year:
| 1974
|
| Make:
| ROTOFINISH
|
| Model:
| ST-60SA
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- CAPACITY ----------------------- 60 CU. FT.
CHANNEL DIAMETER --------------- 21-1/4"
CHANNEL DEPTH ------------------------ 23"
BOWL DIAMETER ------------------------ 96" DIA.
TUB LINING THICKNESS ( WHEN NEW ) --------- 3/4"
MAIN DRIVE MOTOR ---------------------- 20 HP
A.C.
EQUIPPED WITH ---
CONTROL PANEL
PNEUMATIC PARTS DAM
POLYURETHANE LINED TUBE
|
|
|
| FOR SALE: Year - 1992 Make - ROTOFINISH Model - RM-3A |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 5508 , Year = 1992 , Make = ROTOFINISH , Model = RM-3A |
|
|
Category: Vibratory Equipment
|
Capacity: ROTOFINISH "ROTO-MAX" AUTOMATIC CENTRIFUGAL DISC UPFLOW FINISHING SYST
|
| Ad #
5508 |
| Year:
| 1992
|
| Make:
| ROTOFINISH
|
| Model:
| RM-3A
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 6100 LBS
|
| Dimension: L x W x H | 75 X 55 X 108 |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- PROCESSING CAPACITY ----------------- 3 CU. FT.
MAIN DRIVE MOTOR --------------------- 7.5 HP A.C.
EQUIPPED WITH ---
POLYURETHANE LINED BOWL
AUTOMATIC PROCESSING CYCLE (LOAD, FINISH, UNLOAD)
|
|
|
| FOR SALE: Year - 1987 Make - BETTER ENGINEERING Model - 200HD |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 5512 , Year = 1987 , Make = BETTER ENGINEERING , Model = 200HD |
|
|
Category: Cleaning Equipment
|
Capacity: BETTER ENGINEERING #200HD JET PARTS WASHER
|
| Ad #
5512 |
| Year:
| 1987
|
| Make:
| BETTER ENGINEERING
|
| Model:
| 200HD
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | 42 X 40 X 62 |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- TURNTABLE SIZE ------------------- 27" DIA.
WORKING HEIGHT -------------------- 32"
WASH TIME ------------------ UP TO 30 MIN.
HEATING TIME ------------------- UP TO 12 HOURS
DRIVE MOTOR --------------- 2 HP 115/208-230/1/60
COMPLETELY ENCLOSED
PORTABLE
EQUIPPED WITH ---
WASH & HEAT TIMERS
TURNTABLE
FILTER BASKET
STEAM VENT
DOOR LATCHES
JET UNIT
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1964 Make - RAMPE VI-BRADER Model - COF-9 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 5507 , Year = 1964 , Make = RAMPE VI-BRADER , Model = COF-9 |
|
|
Category: Vibratory Equipment
|
Capacity: 1 CU. FT. RAMPE VI-BRADER CONTROLLED ORBITAL FINISHER
|
| Ad #
5507 |
| Year:
| 1964
|
| Make:
| RAMPE VI-BRADER
|
| Model:
| COF-9
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 700 LBS
|
| Dimension: L x W x H | 22 X 34 X 48 |
Machine Location:
|
| City: |
On Request
|
| State: |
Illinois
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- CAPACITY --------------------- 1 CU. FT.
TUB SIZE --------------------- 7" X 13" X 16" DEEP
VARIABLE SPEED ----------------- 900 TO 1800 RPM
MAIN DRIVE MOTOR -------------------- 1 HP
EQUIPPED WITH ---
LINING
TILTING TUB SUSPENSION
VARI-SPEED CONTROL
RECIRCULATING SYSTEM WITH PUMP AND TANK
HOPPER PAN
SEPARATOR SCREENS
ELECTRIC TIMER
|
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
