|
User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Mills & Machining Centers
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 3068 | Horizontal Machining Centers (HMC) |
| 1992 |
DAEWOO ( TOSHIBA ) |
BMC80 |
Good |
Sold |
Photo /
More Info. |
| DAEWOO ( TOSHIBA ) CNC HORIZONTAL MACHINING CENTER: TRAVEL ( X ) ------------------ 63"
TRAVEL ( Y ) ------------------ 35.4"
TRAVEL ( Z ) ------------------ 39.4"
PALLET SIZE ( 2 PALLETS ) ---------- 31.5" X 31.5"
PALLET INDEXING ------------------ 1 DEG.
SPINDLE TAPER ---------------------#50 ISO
PALLET CAPACITY ------------------ 3300 LBS.
TOOL STORAGE CAPACITY ------------ 45 TOOLS
SPINDLE SPEED RANGE -------------- 20 TO 4500 RPM
MAIN DRIVE MOTOR - ( CONT./30 MIN. ) 20 / 15 HP
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 3073 | Gun / Deep Hole Drills |
| 1980 |
ELDORADO |
M75 |
Needs Work |
sold |
Photo /
More Info. |
| 3/4" X 30" ELDORADO #M75 SINGLE SPINDLE GUN DRILL: DRILLING CAPACITY ---------- .0550 TO .75" DIA.
MAXIMUM STROKE ------------- 30"
TABLE SIZE ------------------ 22" X 22"
FEED RATE ---- ( VARIABLE ) - .1 TO 99.9 IPM
SPINDLE SPEEDS -------------- 1455 TO 11,740 RPM
COOLANT PRESSURE CAPACITY ----1500 PSI
COOLANT TANK CAPACITY ------- 90 GALLONS
COOLANT PUMP OUTPUT --------- 18 GPM
FILTRATION ------------------- 5 MICRON
SPINDLE DRIVE -----------------3 HP 208/230/460/3/60
|
|
We found 6 matching ads. Now displaying the remaining 6 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5500 | Cold Saws & Power Hack Saws |
| 1999 |
WILTON/MEP |
TIGER 350 CNC-FE |
Very Good |
sold |
Photo /
More Info. |
| WILTON/MEP 14" CNC AUTOMATIC FERROUS COLD SAW: MAXIMUM BLADE SIZE ------------------------ 14"
BLADE SPEEDS --- ( 4 ) ----------- 15/30/45/90 RPM
VISE OPENING, MAXIMUM ------------------ 7-7/16"
CUTTING CAPACITIES, 90 DEG.:
ROUND ---------------------------- 4-11/16"
SQUARE --------------------------- 3-15/16"
RECTANGULAR ---------------------- 7" X 3-15/16"
CUTTING CAPACITIES, 45 DEG.:
ROUND ---------------------- 4-5/16"
SQUARE --------------------- 3-15/16"
RECTANGULAR ---------------- 4-15/16" X 3-15/16"
MOTOR ------------------------ 2.5/3.5 HP 220/3/60
EQUIPPED WITH ---
MEP EVOLUTION CNC CONTROL
BAR FEED WITH BALL SCREW AND D.C. DRIVE
PNEUMATIC VISE
COMB JAWS FOR BUNDLING
VERTICAL HOLDDOWN CLAMP
FOUR SPEED GEARBOX
AUTOMATIC VISE SYSTEM
FLOOD COOLANT
MITER CAPABILITY
FOOT PEDAL CONTROL
VERTICAL COLUMN DESIGN |
|
| Ad # 5479 | Vertical Band Saws |
| 1965 |
TANNEWITZ |
3000MH |
Good |
SOLD |
Photo /
More Info. |
| 30" TANNEWITZ MODEL 3000MH VERTICAL BAND SAW: THROAT DEPTH ------------------------------ 30"
TABLE SIZE ---------- 32" X 41" WITH 4 "T" SLOTS
TABLE TILTS
VERTICAL CAPACITY ------------------------- 14"
VARIABLE SPEED RANGE ------------- 45 TO 9000 FPM
HYDRAULIC TABLE FEED
MAIN DRIVE MOTOR ----------------- 7.5 HP 440 VOLT
LENGTH OF BLADE -------------------- 17' |
|
| Ad # 5481 | Tilt Frame Vertical Band Saw |
| 1982 |
ARMSTRONG BLUM/ MARVEL |
81A9/M4A |
Good |
Sold |
Photo /
More Info. |
| 18" X 20" ARMSTRONG BLUM "MARVEL" AUTOMATIC VERTICAL BAND SAW: CAPACITY ------------------ 18" WIDE X 20" HIGH
45 DEG. ANGLE LEFT -------- 18" X 11-1/2"
45 DEG. ANGLE RIGHT ------- 18" X 13-1/2"
BLADE SIZE ---------------- 15'6" X 1-1/4" X .042"
WORKING SURFACE OF TABLE -- 30" X 33"
VISE OPENS MAXIMUM -------- 21-1/2"
STANDARD BLADE SPEED VARIABLE ----- 60 TO 400 FPM
SHUTTLE TRAVEL OF FEED TABLE AT ONE SETTING - 24"
MAIN DRIVE MOTOR --------------- 10 HP A.C.
EQUIPPED WITH ---
10' AUTOMATIC INFEED TABLE WITH VISES
MULTI CYCLE UP TO 19 CYCLES
COOLANT SYSTEM
PIECE COUNTER
HYDRAULIC VISES |
|
| Ad # 5478 | Vertical Band Saws |
| 1951 |
DoAll |
V-60 |
Good |
SOLD |
Photo /
More Info. |
| DOALL MODEL V60 CONTOURING VERTICAL BAND SAW: THROAT DEPTH ------------------------------ 60"
MAXIMUM WORK THICKNESS CAPACITY ----------- 12"
TABLE SIZE ----------------- 30" X 30" X 2-1/4"
DISTANCE TABLE TO FLOOR -------------- 44"
TABLE TILT, UNIVERSAL SWIVEL ---- 35 DEG. FORWARD
TABLE TILT, UNIVERSAL SWIVEL - 10 DEG. TO BOTH SIDES & REAR
WHEEL DIAMETER ------------------------- 26"
UPPER WHEEL ADJUSTMENT ----------------- 5-3/4"
SAW LENGTH ----------------------------- 254"
FILE BAND LENGTH --------------------- 249"
CUTTING SPEED ------------------ 50 TO 1500 FPM
EQUIPPED WITH ---
POWER FEED
BLADE WELD/GRINDING ATTACHMENT
CHIP CHUTE
JOB SELECTOR
WORK LIGHT
SPEED REGULATOR
SPEED INDICATOR |
|
| Ad # 5485 | Vertical Band Saws |
| 1989 |
Roll In |
EF |
Good |
Sold |
Photo /
More Info. |
| ROLL IN MODEL EF VERTICAL BAND SAW: CAPACITY, BLADE TO COLUMN -------------- 8.25"
MAXIMUM CLEARANCE UNDER GUIDES --------- 14.5"
TABLE SIZE ------------------------ 18" X 30"
BLADE WIDTH ------------------- .25" TO .75"
BLADE LENGTH -------------------- 120"
BLADE SPEED FPM ----------- 70, 140, 270, 525
MAIN DRIVE MOTOR --------- 3/4 HP 208-220/1/60
EQUIPPED WITH ---
ROLL-IN FEED SYSTEM
HYDRAULIC FEED CONTROL
COUNTERWEIGHT PRESSURE CONTROL
PORTABLE
|
|
| Ad # 5480 | Vertical Band Saws |
| 1957 |
GROB |
2S-36-U |
Good |
SOLD |
Photo /
More Info. |
| 36" GROB VERTICAL BAND SAW: THROAT DEPTH ------------------------ 36"
WORK HEIGHT ------------------------ 20"
TABLE SIZE ----------------------- 36" X 36"
BLADE SIZE ----- ( WIDTH ) -------- 1/8" TO 1-1/4"
BLADE SIZE ----- ( LENGTH ) --------- 242" TO 252"
TABLE TILTS --------- 45 DEG. RIGHT, 15 DEG. LEFT
BLADE SPEED ---- ( VARIABLE ) --- 40 TO 15,000 RPM
MAIN DRIVE MOTOR ------------ 15/10 HP A.C.
EQUIPPED WITH ---
BLADE WELDER/GRINDER
EXTRA BLADE |
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5301 | Surface Grinders |
| 1993 |
JONES & SHIPMAN |
8 x FORMAT 5/200 |
Very Good |
Sold |
Photo /
More Info. |
| 8" X 24" JONES & SHIPMAN CNC SURFACE GRINDER: WORKING SURFACE OF TABLE ------ 8" X 24"
LONGITUDINAL TRAVERSE ( HYDR./HAND ) ------ 25/26"
TABLE CROSS TRAVERSE ----------------------
DISTANCE WHEEL TO TABLE, MAX. ------------- 15.4"
TABLE JOG RATE --------------------- 3 - 20 FPM
WHEEL SIZE, STANDARD -------------- 10" X 1" X 3"
GRINDING WHEEL SPEED ------------ 2,640 RPM
MINIMUM PROGRAMMABLE CROSSFEED INCREMENT -- .0001"
MINIMUM PROGRAMMABLE WHEELHEAD INCREMENT -- .0001"
WHEELHEAD AND CROSSFEED RATES -- .006 TP .120 IPM
WHEELHEAD MOTOR ----------------- 3 HP A.C.
EQUIPPED WITH ---
ALLEN BRADLEY 8600 CNC CONTROL
D.C. SERVO MOTOR DRIVEN BALLSCREWS WITH LINEAR SCALE FEEDBACK ( Y & Z AXES )
USER FRIENDLY DISPLAYS OF GRINDING AND DRESSING CYCLES
BALL BEARING WHEELHEAD
BALL AND ROLLER SLIDE WHEELHEAD ASSEMBLY
8" X 24" WALKER FINE LINE ELECTRO MAGNETIC CHUCK AND WALKER VARIABLE CONTROL
TABLE MOUNTED FLIP-UP DRESSER
COOLANT SYSTEM
|
|
| Ad # 3080 | Jig Grinders |
| 1972 |
MOORE |
#3 |
Good |
SOLD |
Photo /
More Info. |
| MOORE #3 PRECISION JIG GRINDER: TABLE WORK CAPACITY ------------ 11" X 24"
TABLE TRAVEL ----- ( LONGITUDINAL ) ------- 18"
TABLE TRAVEL ----- ( CROSS ) -------------- 11"
VERTICAL TRAVEL OF SPINDLE HOUSING ---- 12-5/8"
VERTICAL SPINDLE TRAVEL ----------- 3-5/8"
TABLE TOP TO WHEEL COLLET, ADJUSTABLE - 2" TO 18"
SPINDLE SPEEDS, INFINITELY VARIABLE 40 TO 250 RPM
SPINDLE FEEDS, INFINITELY VARIABLE 4 TO 240 CPM
GRINDING CAPACITY WITH OPTIONAL EXT. PLATES 1/64 TO 3-1/2
( UP TO 13-1/2" )
GRINDING WHEEL SPEEDS WITH OPTIONAL HEADS 6000 TO 175,000 RPM
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5501 | Power Squaring Shear (Hydraulic) |
| 1960 ? |
PACIFIC |
375S14ARH |
Good |
Sold |
Photo /
More Info. |
| 5/8" X 14' PACIFIC MODEL 375S14ARH HYDRAULIC PLATE SHEAR: CAPACITY IN MILD STEEL ----------- 5/8" X 14'
RATED RAKE ANGLE ----------------- 5/16" PER FOOT
MAXIMUM RAKE ANGLE --------------- 1/2" PER FOOT
DISTANCE BETWEEN HOUSINGS -------- 14'3"
WORKING HEIGHT AT TABLE -------------- 34-3/4"
THROAT DEPTH --------------------------- 18"
HYDRAULIC SYSTEM MOTOR ---------------- 30 HP A.C.
MACHINE REQUIRES PIT FOR LOWER APRON - 4-3/4" DEEP
EQUIPPED WITH ---
48" FRONT OPERATED POWER BACK GAUGE
(2) FRONT SUPPORT ARMS
POWER RAKE ADJUSTMENT
ELECTRIC FOOT SWITCH
HYDRAULIC HOLDDOWNS
BLADE AND HOLDDOWN COVER
PUSHBUTTON CONTROLS
SELF CONTAINED HYDRAULIC SYSTEM
BLADE CLEARANCE ADJUSTMENT
BALL TRANSFERS BUILT INTO BED
PLANT OWNED, CAN BE SHOWN IN OPERATION |
|
| Ad # 3057 | Power Squaring Shear (Hydraulic) |
| 1988 |
DARLEY |
S1250-4 |
— |
sold |
Photo /
More Info. |
| 4' X 10 GA. DARLEY HYDRAULIC SHEAR: CAPACITY THICKNESS, MILD STEEL ------------ 4 MM ( .1575" )
CAPACITY THICKNESS, STAINLESS STEEL ------- 3 MM ( .1181" )
STROKES PER MINUTE ------------------------ 51
CAPACITY LENGTH --------------------------- 50"
NUMBER OF HYDRAULIC HOLDDOWNS ------------- 7
MAIN DRIVE MOTOR -------------------------- 10 HP A.C.
EQUIPPED WITH ---
24" PROGRAMMABLE BACK GAUGE
40" SQUARING ARM
FRONT ARM
ELECTRIC FOOT CONTROL
|
|
We found 9 matching ads. Now displaying the remaining 9 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5495 | Press Brakes (Hydraulic) |
| 1974 |
DIACRO |
16-96 |
Good |
SOLD |
Photo /
More Info. |
| 35 TON, 8' DIACRO HYDRA-MECHANICAL PRESS BRAKE: LENGTH OF BED & RAM ----------------------- 96"
DISTANCE BETWEEN HOUSINGS ----------------- 62"
CAPACITY -------- ( MILD STEEL ) ---- 96" X 16 GA.
STROKE OF RAM ----------------------------- 2"
SHUT HEIGHT RAM UP, STROKE DOWN ----------- 9"
RAM ADJUSTMENT ---------------------------- 3"
THROAT CLEARANCE FROM CENTER OF DIES ------ 9"
MAIN DRIVE MOTOR ------------------- 3 HP A.C.
EQUIPPED WITH ---
HURCO AUTOBEND IV CNC BACK GAUGE WITH 24" RANGE
STROKE ADJUSTMENT
COMPLETE HYDRAULIC SYSTEM
LOWER & TOP DIE HOLDERS
FOOT PEDAL CONTROL |
|
| Ad # 5491 | Press Brakes (Hydraulic) |
| 1996 |
LDV |
PPEB350/14 |
Good |
sold |
Photo /
More Info. |
| 350 TON 177" BED LVD CNC HYDRAULIC PRESS BRAKE: FEATURING FLUSH FLOOR DESIGN, 6 AXIS CNC GAUGING, HYDRAULIC DIE CLAMPS
CAPACITY ---------------------- 350 TONS
OVERALL LENGTH OF BED AND RAM ------------- 177"
DISTANCE BETWEEN HOUSINGS ----------------- 136"
STROKE OF RAM, MAXIMUM -------------------- 21.6"
MAXIMUM DISTANCE TABLE TO RAM ------------- 27.55"
THROAT DEPTH ------------------------------ 13.7"
WIDTH OF BED TOP -------------------------- 8.2"
SPEEDS, APPROACH ----------------- 3.93 IN./SEC.
SPEEDS, WORKING ------------------ .33 IN./SEC.
SPEEDS, RETURN -------------------- 3.4 IN./SEC.
MAIN DRIVE MOTOR -------------- 48 HP A.C.
EQUIPPED WITH ---
LVD #MNC95/C 6 AXIS CNC GAUGING SYSTEM
HYDRAULIC DIE CLAMPING
LIGHT CURTAINS ( AS-IS )
FLUSH FLOOR DESIGN |
|
| Ad # 5496 | Press Brakes (Hydraulic) |
| 1963 |
PACIFIC |
150-12 |
Good |
SOLD |
Photo /
More Info. |
| 150 TON, 12' PACIFIC HYDRAULIC PRESS BRAKE: CAPACITY -------------------------- 150 TONS
OVERALL LENGTH OF BED & RAM --------------- 12'
DISTANCE BETWEEN HOUSINGS ----------------- 8'5"
BENDING CAPACITY, MILD STEEL ---------- 10' 3/16"
STROKE OF RAM ----------------------------- 10"
OPEN HEIGHT ------------------------------- 15"
CLOSED HEIGHT ----------------------------- 5"
THROAT DEPTH ------------------------------ 6-3/4"
PIT REQUIRED FOR BED EXTENSION
BELOW FLOOR --- ( L x W x D ) ----- 10" X 2" X 16"
MAIN DRIVE MOTOR ------------------- 15 HP A.C.
OVERALL HEIGHT ---------------------------- 104"
( EXCLUDING 16" BELOW FLOOR SECTION )
EQUIPPED WITH:
UPPER DIE CLAMPS
LOWER DIE CLAMP
ELECTRIC CONTROL PEDAL
TONNAGE CONTROL
REMOVABLE RAM AND BED ANGLES |
|
| Ad # 5490 | Press Brakes (Hydraulic) |
| 1986 |
LDV |
55-BH-08N |
Good |
sold |
Photo /
More Info. |
| 55 TON LVD CNC HYDRAULIC PRESS BRAKE: TONNAGE CAPACITY ------------------ 55 TONS
OVERALL WORK LENGTH ----------------------- 100"
DISTANCE BETWEEN HOUSINGS ----------------- 80"
RAM STROKE ----------- ( MAXIMUM ) -------- 4"
RAM ADJUSTMENT ---------------------------- 3"
MAXIMUM DISTANCE BETWEEN BED AND RAM ------ 12"
DEPTH OF GAP ------------------------------ 8"
WIDTH OF BED ------------------------------ 5-
1/2"
MAIN DRIVE MOTOR ------------- 4 KW 230/460/3/60
EQUIPPED WITH ---
MNC 800 CNC BACK GAUGE WITH 30" RANGE
LOWER DIE HOLDER
UPPER DIE HOLDER
PEDESTAL CONTROL STATION WITH DUAL PALM & FOOT
CONTROL |
|
| Ad # 5489 | Press Brakes (Hydraulic) |
| 1977 |
DIACRO |
55-10 |
Good |
Sold |
Photo /
More Info. |
| 55 TON DIACRO HYDRA-MECHANICAL PRESS BRAKE: LENGTH OF BED & RAM ----------------------- 120"
DISTANCE BETWEEN HOUSINGS ----------------- 102"
CAPACITY ----- ( MILD STEEL ) ------ 120" X 14 GA.
STROKE OF RAM ----------------------------- 3"
SHUT HEIGHT RAM UP, STROKE DOWN ----------- 12"
RAM ADJUSTMENT ---------------------------- 4"
THROAT CLEARANCE FROM CENTER OF DIES ------ 8"
MAIN DRIVE MOTOR ------------- 10 HP 230/460/3/60
EQUIPPED WITH ---
24" CNC BACK GAUGE ( 1 AXIS )
STROKE ADJUSTMENT
COMPLETE HYDRAULIC SYSTEM
LOWER & TOP DIE HOLDERS
FOOT PEDAL CONTROL |
|
| Ad # 5493 | Press Brakes (Hydraulic) |
| 1989 |
GULFIL |
PE-25-100 |
Good |
SOLD |
Photo /
More Info. |
| 110 TON, 100" GUIFIL HYDRAULIC PRESS BRAKE: FEATURING UP-ACTING DESIGN, 2 AXIS CNC BACK GAUGE
CAPACITY, U.S. TONS ------------------ 110 TONS
BENDING LENGTH ---------------------------- 100"
DISTANCE BETWEEN HOUSINGS ----------------- 80"
THROAT DEPTH ------------------------------ 16"
STROKE LENGTH ----------------------------- 18"
SPEED, APPROACH ----------------------- 1.58 IPS
SPEED, BENDING ---------------------- .28 IPS
SPEED, RETURN --------------------- 2.17 IPS
MAIN DRIVE MOTOR ------------------- 10 HP A.C.
EQUIPPED WITH ---
AUTOMEC (AUTOGAUGE CNC 1000) 2 AXIS CNC BACK GAUGE
UPPER DIE CLAMPS |
|
| Ad # 5494 | Press Brakes (Hydraulic) |
| 1989 |
WYSONG |
H40-72 |
Good |
SOLD |
Photo /
More Info. |
| 40 TON x 52" WYSONG ROTARY ACTUATED HYDRA-MECHANICAL PRESS BRAKE: 40 TON WYSONG MODEL H40-72 ROTARY ACTUATED HYDRA-MECHANICAL PRESS BRAKE WIT... |
|
| Ad # 3144 | Press Brakes (Hydraulic) |
| — |
Pacific |
J55 |
— |
Sold |
Photo /
More Info. |
| Pacific J55 CNC Press Brake: 55 Ton Capacity
8' Bed and Ram Length
Automatic CNC Back Gauge |
|
| Ad # 3064 | Press Brakes (Mechanical) |
| 1980 |
DREIS & KRUMP |
1012L |
— |
SOLD |
Photo /
More Info. |
| 90 TON DREIS & KRUMP MODEL 1012L MECHANICAL PRESS BRAKE: TONNAGE CAPACITY: BOTTOM OF STROKE 90 TON
TONNAGE CAPACITY: MID STROKE 60 TON
BENDING CAPACITY, MILD STEEL 5' X 1/4"
BENDING CAPACITY, MILD STEEL 8' X 3/16"
BENDING CAPACITY, MILD STEEL 10' X 10 GA.
OVERALL LENGTH OF BED AND RAM 144"
DISTANCE BETWEEN HOUSINGS 126"
STROKE 3"
RAM ADJUSTMENT, MOTORIZED 4"
STROKES PER MINUTE 40
DIE SPACE, STROKE DOWN, ADJUSTMENT UP 12"
THROAT DEPTH 8"
ALL STEEL CONSTRUCTION
AIR CLUTCH WITH FOOT PEDAL CONTROL
MAIN DRIVE MOTOR 5 HP A.C.
|
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5504 | Angle Bending Rolls |
| 1972 |
ROUNDO |
R6S |
Very Good |
SOLD |
Photo /
More Info. |
| ROUNDO R6S HYDRAULIC ANGLE BENDING ROLL (HORIZONTAL PLANE): CAPACITY:
ANGLES, LEG OUT: 5" X 5" X 5/8" TO 65" MIN. DIA.
ANGLES, LEG IN: 5" X 5" X 1/2" TO 90" MIN. DIA.
ANGLES, SMALLEST ANGLE: 1-1/2" X 1-1/2" X 1/4"
FLATS ON EDGE: 1-1/4" X 5" TO 50" MIN. DIA.
FLATS ON FLAT: 1-1/2" X 10" TO 50" MIN. DIA.
ROUND BAR CAPACITY ---------------- 3-1/2" DIA.
I-BEAMS AND CHANNELS -------------- 12"
DIAMETER OF BENDING ROLLS ---------- 17-3/8"
SPEEDS ------------- INFINITELY VARIABLE
MAIN DRIVE MOTOR ------------------ 23 HP A.C.
EQUIPPED WITH ---
3 ROLL DRIVE
HYDRAULICALLY ADJUSTABLE GUIDE ROLLS
HYDRAULIC DRIVE
DOUBLE PINCH TYPE - PREBEND
MISCELLANEOUS DIES |
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5498 | Ironworkers |
| 1982 |
MUBEA |
HIW600 |
Good |
SOLD |
Photo /
More Info. |
| 66 TON MUBEA HYDRAULIC IRONWORKER: PUNCH CAPACITIES:
TONS ------------------------------------ 66
DIAMETER THRU THICKNESS ----- 1-1/8" THRU 11/16"
DIAMETER THRU THICKNESS ----- 15/16" THRU 7/8"
THROAT DEPTH ------------------------------ 10"
LENGTH OF STROKE -------------------------- 4"
SHEARING CAPACITIES:
ANGLES, 90 DEGREE --------------- 5" X 5" X 1/2"
ROUND BARS ------------------------------ 1-3/8"
SQUARE BARS ----------------------------- 1-1/4"
FLAT BARS ------------------------- 8" X 1"
FLAT BARS ------------------------- 18" X 1/2"
MAIN DRIVE MOTOR --------------------- 10 HP A.C.
EQUIPPED WITH ---
2 SLIDES
5 WORK STATIONS
COPER/NOTCHER
2 FOOT CONTROLS |
|
| Ad # 5497 | Ironworkers |
| 1974 |
MUBEA |
"OPTIMA" 48-4 |
Good |
SOLD |
Photo /
More Info. |
| 48 TON MUBEA "OPTIMA" 48-4 UNIVERSAL MECHANICAL IRONWORKER: WITH 3 CLUTCHES
PUNCHING CAPACITY -------------- 48 TONS
1-1/8" THRU 1/2"
1" THRU 9/16"
THROAT DEPTH ---------------------- 12-5/8"
SECTION SHEAR:
4" X 4" X 3/8" ANGLES AT 90 DEG.
2-1/2" X 2-1/2" X 5/16" ANGLES AT 45 DEG.
3-1/2" X 3/8" TEES
PLATE SHEAR WITH STANDARD 2-1/2 DEG. BLADE:
7-1/2" X 5/16"
3-1/2" X 1/2"
BAR SHEAR:
ROUND 1-3/8"
SQUARE 1-1/4"
COPER NOTCHER:
REGULAR COPING, ANGLES 3" X 5/16"
TRIANGULAR NOTCHING, ANGLES 2-1/2" X 5/16"
STROKES PER MINUTE ------------------------ 55 SPM
MOTOR -------------------------- 2 HP 220/3/60
EQUIPPED WITH ---
EXTRA BLADES AND BIG ASSORTMENT OF PUNCHES |
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5487 | Manual Arbor Press |
| 1967 |
WHITNEY |
58 |
Good |
SOLD |
No Photo /
More Info. |
| 5 TON WHITNEY MODEL 58 FOOT OPERATED PRESS: THROAT DEPTH ------------------------------ 18"
HEIGHT OF THROAT -------------------------- 6-3/4"
LENGTH OF STROKE -------------------------- 1"
STROKE ADJUSTMENT ------------------------- 3/4"
DIE SPACE, STROKE DOWN, ADJUSTMENT UP
FROM BED OF PRESS ----------------------- 5"
DIAMETER OF PUNCH SHANK HOLE IN RAM ------- 1" |
|
| Ad # 5486 | Manual Arbor Press |
| — |
DAKE |
# 2 |
Good |
sold |
Photo /
More Info. |
| 6 TON DAKE COMPOUND LEVERAGE BENCH TYPE ARBOR PRESS: CAPACITY ----------------------------- 6 TONS
LEVERAGE RATIO ----------------------- 66:1
RAM SIZE ------------------- 1-1/2" X 1-1/2" X 19"
MAXIMUM DIAMETER WORK ------------- 15-1/2"
THROAT ------------------------------- 7-3/4"
LARGEST ARBOR ------------------------ 3"
MAXIMUM HEIGHT RAM TO TABLE ----------- 15"
MAXIMUM HEIGHT RAM TO TABLE PLATE ---- 13-3/4"
BASE -------------------------- 20" X 8-1/4" |
|
We found 1 matching ad. Now displaying the final ad.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 3072 | Coordinate Measuring Machine, (CMM) |
| 1999 |
STARRETT "PREMIS" |
HGDC2424-18 |
— |
Sold |
Photo /
More Info. |
| STARRETT "PREMIS" CNC COORDINATE MEASURING MACHINE: MEASURING MODES --- CNC AUTOMATIC OR JOYSTICK CONTROL
MEASURING RANGE --- ( X ) ------- 24"
MEASURING RANGE --- ( Y ) ------- 24"
MEASURING RANGE --- ( Z ) ------- 18"
VOLUMETRIC ACCURACY,
BAND WIDTH IN BALLBAR LENGTH 12" --- .0003"
REPEATABILITY ( BAND WIDTH ) --------- .0001"
MAXIMUM VELOCITY ------------------- 12" PER SEC.
MAXIMUM ACCELERATION --------- 31.5" PER SEC./SQ.
TABLE WORKING CAPACITY --- 32"L X 28"W X 20"H
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 5511 | Vibratory Equipment |
| 1974 |
ROTOFINISH |
ST-60SA |
Good |
sold |
Photo /
More Info. |
| 60 CU FT. ROTOFINISH SPIRATRON BOWL TYPE VIBRATORY FINISHING MACHINE: CAPACITY ----------------------- 60 CU. FT.
CHANNEL DIAMETER --------------- 21-1/4"
CHANNEL DEPTH ------------------------ 23"
BOWL DIAMETER ------------------------ 96" DIA.
TUB LINING THICKNESS ( WHEN NEW ) --------- 3/4"
MAIN DRIVE MOTOR ---------------------- 20 HP
A.C.
EQUIPPED WITH ---
CONTROL PANEL
PNEUMATIC PARTS DAM
POLYURETHANE LINED TUBE |
|
| Ad # 5508 | Vibratory Equipment |
| 1992 |
ROTOFINISH |
RM-3A |
Very Good |
SOLD |
Photo /
More Info. |
| ROTOFINISH "ROTO-MAX" AUTOMATIC CENTRIFUGAL DISC UPFLOW FINISHING SYST: PROCESSING CAPACITY ----------------- 3 CU. FT.
MAIN DRIVE MOTOR --------------------- 7.5 HP A.C.
EQUIPPED WITH ---
POLYURETHANE LINED BOWL
AUTOMATIC PROCESSING CYCLE (LOAD, FINISH, UNLOAD) |
|
| Ad # 5512 | Cleaning Equipment |
| 1987 |
BETTER ENGINEERING |
200HD |
Good |
Sold |
Photo /
More Info. |
| BETTER ENGINEERING #200HD JET PARTS WASHER: TURNTABLE SIZE ------------------- 27" DIA.
WORKING HEIGHT -------------------- 32"
WASH TIME ------------------ UP TO 30 MIN.
HEATING TIME ------------------- UP TO 12 HOURS
DRIVE MOTOR --------------- 2 HP 115/208-230/1/60
COMPLETELY ENCLOSED
PORTABLE
EQUIPPED WITH ---
WASH & HEAT TIMERS
TURNTABLE
FILTER BASKET
STEAM VENT
DOOR LATCHES
JET UNIT |
|
| Ad # 5507 | Vibratory Equipment |
| 1964 |
RAMPE VI-BRADER |
COF-9 |
Very Good |
Sold |
Photo /
More Info. |
| 1 CU. FT. RAMPE VI-BRADER CONTROLLED ORBITAL FINISHER: CAPACITY --------------------- 1 CU. FT.
TUB SIZE --------------------- 7" X 13" X 16" DEEP
VARIABLE SPEED ----------------- 900 TO 1800 RPM
MAIN DRIVE MOTOR -------------------- 1 HP
EQUIPPED WITH ---
LINING
TILTING TUB SUSPENSION
VARI-SPEED CONTROL
RECIRCULATING SYSTEM WITH PUMP AND TANK
HOPPER PAN
SEPARATOR SCREENS
ELECTRIC TIMER |
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
