User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 4 matching ads. Now displaying the remaining 4 ads.
FOR SALE: Year - 2006 Make - HAAS Model - TL-1 |
---|
FOR SALE: Ad # 10735 , Year = 2006 , Make = HAAS , Model = TL-1 |
|
Category: Combination (teach lathe) CNC / Manual
|
Capacity:
|
Ad #
10735 |
Year:
| 2006
|
Make:
| HAAS
|
Model:
| TL-1
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Oregon
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Haas TL-1 CNC Toolroom Lathe
2006 Haas TL-1 CNC or Manual operated lathe Very low hours and used in a home shop and never for production work Comes loaded with 3 jaw chuck, Dorian Quick change tool post 5 tool holders tailstock Haas coolant system rigid tapping floppy drive Royale 5C Air collet closer with foot control ( cost over $2500 ) 5C collet nose, 7.5hp, 2,000 rpm, Lathe can run on single phase 240v power or three phase 230 v power
|
|
|
FOR SALE: Year - Make - Mazak Model - QS-30 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 10737 , Year = , Make = Mazak , Model = QS-30 |
|
Category: Turning Center 11 in. & over chuck
|
Capacity: 12" Chuck
|
Ad #
10737 |
Year:
|
|
Make:
| Mazak
|
Model:
| QS-30
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Iowa
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- QS-30 MAZAK CNC Lathe
Mazak CNC lathe Machine features a 12 inch chuck and has a 40" center to center
|
|
|
Buyers Premium:
A 7 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1999 Make - HAAS Model - SL20 |
---|
FOR SALE: Ad # 10734 , Year = 1999 , Make = HAAS , Model = SL20 |
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: 8" 3 Jaw Hydraulic Chuck
|
Ad #
10734 |
Year:
| 1999
|
Make:
| HAAS
|
Model:
| SL20
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: |
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Wisconsin
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- HAAS SL20 CNC LATHE
1999 Haas SL20 CNC Lathe 8" 3 Jaw Hydraulic Chuck ATS S20 Pad Type Collet Chuck Parts Catcher 10 Station Turret 4000 RPM Extended Memory
|
|
|
FOR SALE: Year - 1989 Make - Mazak Model - QT 15 |
---|
FOR SALE: Ad # 10736 , Year = 1989 , Make = Mazak , Model = QT 15 |
|
Category: Turning Center 11 in. & over chuck
|
Capacity: collet lathe
|
Ad #
10736 |
Year:
| 1989
|
Make:
| Mazak
|
Model:
| QT 15
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 6500
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Indiana
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Mazak Quickturn 15 CNC lathe nice machine is in
has a collet chuck, no 3 jaw have collet sleeves only cut plastic New: 1989 Mazatrol Cam T-2 CNC Control 17.3" Max. Swing 20" Max. Centers 2.0" Capacity 15 HP 5,000 RPM 8 Position Tool Turret
|
Electrical Description |
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 1940's Make - CINCINNATI Model - VBM 120 |
---|
FOR SALE: Ad # 10743 , Year = 1940's , Make = CINCINNATI , Model = VBM 120 |
|
Category: Vertical Turret Lathe (VTL)
|
Capacity: 126" max swing
|
Ad #
10743 |
Year:
| 1940's
|
Make:
| CINCINNATI
|
Model:
| VBM 120
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 60,000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Indiana
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- CINCINNATI VBM-120" swing..Actual swing: 126"
ram travel 60" table dia -84" 65" work height RPM:0-40 50 HP NO Pit required table load over 25 Ton max Under Power 2 heads video possible vintage 1940's no markings on it to give me a date It now has a variable speed controller for both the main drive and the feeds. This eliminates the need for gearing and makes the speed and feed changes a lot easier It also has an air clutch installed to eliminate the hard starting that the old system had There has also been an upgrade to a modern lubrication system (Willie Vogel) which allows for ease of lubrication no jaws with machine cost to disasseble and load on truck: $ 10,000
|
Electrical Description |
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - Make - Matsuura Model - |
---|
FOR SALE: Ad # 10849 , Year = , Make = Matsuura , Model = |
|
Category: Vertical Machining Centers (VMC)
|
Capacity: Travels: X 20" Y 14" Z 17".
|
Ad #
10849 |
Year:
|
|
Make:
| Matsuura
|
Model:
|
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Florida
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- This is a great milling machine, that works fine, and is extremely accurate.
Travel is X 20" Y 14" Z 17". Included is a complete set of tool holders, every holder you will ever need. The table is also included. There are two Kurt vises. A rotary indexer, that I have used as a fourth axis. Great for cutting splines. Included is a computer with a machining program which will write G code to build a part by just stating the dimensions you want by filling in the blanks. Then it will simulate the machining process so you verify it is what you want, before sending the commands to the mill. This eliminates the need to know CAD or make drawings.Very easy to learn. There is everything you need to start building parts right away.
|
|
|
We found 8 matching ads. Now displaying the remaining 8 ads.
FOR SALE: Year - Make - Bridgeport Model - |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 10729 , Year = , Make = Bridgeport , Model = |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: Table 9"X42"
|
Ad #
10729 |
Year:
|
|
Make:
| Bridgeport
|
Model:
|
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 2500
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Illinois
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Bridgeport Milling Machine 9 x 42
Variable Spd head DRO PWR Feed Bridgeport 1 1/2HP Milling Machine variable speed Bridgeport power feed on the X digital readouts on the X and Y Table is 9"X42", has Bijur one shot lube Ways are decent still some scrapings showing Shaper attachment not included
|
|
|
FOR SALE: Year - Make - Bridgeport Model - |
---|
FOR SALE: Ad # 10723 , Year = , Make = Bridgeport , Model = |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: Swing 16 Inches
|
Ad #
10723 |
Year:
|
|
Make:
| Bridgeport
|
Model:
|
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
California
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
General Description |
- Used but in good shape
Mill/Drill Machine Swing 16 In Motor HP 1.5, Voltage 230, 11.5 Amps Spindle Taper R8 Spindle Speeds 150-3000 Spindle Travel 5 In
|
|
|
FOR SALE: Year - Make - Bridgeport Model - |
---|
FOR SALE: Ad # 10727 , Year = , Make = Bridgeport , Model = |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity:
|
Ad #
10727 |
Year:
|
|
Make:
| Bridgeport
|
Model:
|
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Illinois
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Bridgeport Milling Machine
Bridgeport with variable speed head and much more tooling Clamping Indexing head fly cutters 240 volt, 3 phase Ways are tight. Cannot take delivery until 10/15/10
|
|
|
FOR SALE: Year - Make - Bridgeport Model - |
---|
FOR SALE: Ad # 10726 , Year = , Make = Bridgeport , Model = |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: Table size 9" x 60"
|
Ad #
10726 |
Year:
|
|
Make:
| Bridgeport
|
Model:
|
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 3,000lbs
|
Dimension: L x W x H | L 5’8” X W 4’10” X H“84 H |
Machine Location:
|
City: |
On Request
|
State: |
Texas
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Bridgeport milling machine with hydraulic tracer
Specifications: 2 HP motor 220 VAC 3-phase Taper R8 speeds range 82 to 3810 rpm quill travel 5” Table size 9" x 60" Longitudinal travel 28" (700mm) Cross travel 12" (300mm) Vertical knee travel 16" (400mm) Weight, approx. 3,000 lbs Hydraulic tracer included as shown Hydraulic pump not included Machine measures: L 5’8” X W 4’10” X H“84 H weights 3,000
|
|
|
FOR SALE: Year - 1996? Make - Bridgeport Model - Serries 1 -J2 head |
---|
FOR SALE: Ad # 10724 , Year = 1996? , Make = Bridgeport , Model = Serries 1 -J2 head |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 9 x 48 table :3 axis cnc
|
Ad #
10724 |
Year:
| 1996?
|
Make:
| Bridgeport
|
Model:
| Serries 1 -J2 head
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 3000
|
Dimension: L x W x H | 5 x 5 x 7 |
Machine Location:
|
City: |
On Request
|
State: |
New York
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- BRIDGEPORT CNC MILLING MACHINE
9 x 48 table BRIDGEPORT MILL WITH THREE AXES DX-32 CONTROL no manual hand controls RS232 & floppy drive auto lube m function in control COMES WITH CAT 30 SPINDLE PROGRAMABLE SPINDLE 12" x 30" travel POWER DRAWBAR COOLANT SYSTEM AND BOOKS IN EXCELLENT CONDITION LESS THAN 100 HOURS
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Bridgeport Model - Vintage 943 |
---|
FOR SALE: Ad # 10725 , Year = , Make = Bridgeport , Model = Vintage 943 |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity:
|
Ad #
10725 |
Year:
|
|
Make:
| Bridgeport
|
Model:
| Vintage 943
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Florida
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
General Description |
- Vintage Bridgeport milling machine
943 Bridgeport M- Head Has some tooling 220 3 phase motor with single phase converter
|
|
|
FOR SALE: Year - Make - Bridgeport Model - |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 10728 , Year = , Make = Bridgeport , Model = |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity:
|
Ad #
10728 |
Year:
|
|
Make:
| Bridgeport
|
Model:
|
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Oklahoma
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
General Description |
- Bridgeport vertical milling machine w/ DRO
Power Feed and varible speed head
|
|
|
FOR SALE: Year - 1993 Make - Acer Model - Ultima 3VK |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 10721 , Year = 1993 , Make = Acer , Model = Ultima 3VK |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 10 x 54 Table
|
Ad #
10721 |
Year:
| 1993
|
Make:
| Acer
|
Model:
| Ultima 3VK
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 3000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 1993 Acer Ultima 3VK Milling Machine
10x54 Table 3hp variable speed head (motor just rewound for dual voltage 3ph) power feed on X axis, Mitutoyo DRO Lots of tooling to go with it, milling vise rotary table hold down sets center finder, etc.
|
Electrical Description |
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - new Make - Cosen Model - MH-1016JA |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 10745 , Year = new , Make = Cosen , Model = MH-1016JA |
|
Category: Horizontal Band Saws
|
Capacity: 10" rounds
|
Ad #
10745 |
Year:
| new
|
Make:
| Cosen
|
Model:
| MH-1016JA
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 1,010
|
Dimension: L x W x H | 72” x 38” x 45” |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- SPECIFICATIONS
Round 90°-10" round 45°-9"" Square 90°-9” x 9" 45deg-6.5” x 6.5”” Maximum Cutting Capacity: Rectangle 90° H x W-9” x 14.5" 45° H x W-6.5” x 9” Blade: Speed-95, 150, 213, 321 fpm--step pulley change Size-1" x 11’ x .035" Guides-Tungsten Carbide Motor: 2HP Coolant coolant motor-1/8 hp Weight 1,010 lbs. Power 230V, 3 ph, 60 Hz Shipping Dimensions 72” x 38” x 45” Floor Space (L x W x H) 69" x 28" x 42.5" Machine Features: Machine Structure & Design: Heavy-duty hydraulic cylinder plus precision ground hinge support and guide the rugged saw frame through the entire cutting cycle Special wear resistant DU bushing is used to ensure durability and long use life Cast iron quick set up vise features straight and miter cuts from 90 to 45 degrees It enables miter cutting at desired angles via the large easy-to-read mitering scale Large rugged base provides support for the heavy cast, and it comes with built-in coolant & hydraulic systems to offer both sound stability & all-in-one convenience Blade Drive: A 2 hp motor, heavy-duty reducer, and variable step drive assembly with excellent mechanical design feature the essentials for production cutting. The 4-speed transmission is equipped with the best worm gear speed reducer The worm shaft is hardened and ground. Together, they provide quiet, powerful, and trouble-free drive Blade Guidance & Lubrication System: Carbide blade guides with roller bearings pre- align the blade before entering carbide blade guides This feature reduces wear on blade guides and blade, thus enhancing blade life The rigid guide arms are mounted on an extra wide precision ground dovetail slide for more solid and supportive surface This rigid design owes to use of superior cast- iron which greatly reduces vibration and achieves better cutting result Two additional guides located on a central axis support the blade from the top, giving it extra penetrating force The carbide guides are relieved to allow coolant flow to lubricate and cool the blade as well as work piece Integral coolant system. Blade brush to remove chips from blade gullet Control & Automation: Down feed rate & cutting pressure contro The feed rate may be adjusted by setting the dial between 0 and 10 via the hydraulic down feed valve The vast range of adjustment allows proper setting which results in longer blade life, shorter cutting times, and better finishes The control panel is clearly arranged and centrally located on top of saw head at chest level Material Clamping & Feeding: Cast iron vises Secure clamping via a dependable manual lead screw system with anti-slip hand wheel Safety: Conduits protect all exposed electric wiring and hydraulic circuits Alert orange for blade guards and access doors Standard Accessories: Easy blade change with front access at waist level Adjustable material stop Bi-metal saw blade Operation & parts manual
|
Electrical Description |
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 1992 Make - Betenbender Model - 14 x 120" |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 10750 , Year = 1992 , Make = Betenbender , Model = 14 x 120" |
|
Category: Press Brakes (Hydraulic)
|
Capacity: 14' x 120 Ton capacity
|
Ad #
10750 |
Year:
| 1992
|
Make:
| Betenbender
|
Model:
| 14 x 120"
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Kansas
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Betenbender press brake,
14\GA x 120 ton capacity, new 1992, with Hurco single axis BG.
|
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
FOR SALE: Year - Make - Scotchman Model - |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 10747 , Year = , Make = Scotchman , Model = |
|
Category: Ironworkers
|
Capacity: 20 ton
|
Ad #
10747 |
Year:
|
|
Make:
| Scotchman
|
Model:
|
|
Condition:
|
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Arizona
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Scotchman Ironworker/ shear/ punch/ angle iron shear
20 ton capacity Older model, but saves money versus drilling & torching has punches & small v-block bending die
|
|
|
FOR SALE: Year - Make - Scotchman Model - 314 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 10749 , Year = , Make = Scotchman , Model = 314 |
|
Category: Ironworkers
|
Capacity: 30 ton
|
Ad #
10749 |
Year:
|
|
Make:
| Scotchman
|
Model:
| 314
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Missouri
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
General Description |
- Scotchman 30 ton Ironworker Mod. 314
50 dies valued at 60.00 per die being given away with machine for free: both going together either way.
|
|
|
FOR SALE: Year - Make - Scotchman Model - |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 10748 , Year = , Make = Scotchman , Model = |
|
Category: Ironworkers
|
Capacity:
|
Ad #
10748 |
Year:
|
|
Make:
| Scotchman
|
Model:
|
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Washington
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Scotchman Ironworker
This is a lightly used Ironworker in excellent shape ready to go to work
|
|
|
FOR SALE: Year - Make - Scotchman Model - 4014T |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 10746 , Year = , Make = Scotchman , Model = 4014T |
|
Category: Ironworkers
|
Capacity:
|
Ad #
10746 |
Year:
|
|
Make:
| Scotchman
|
Model:
| 4014T
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
Georgia
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Scotchman 4014T ironworker
Ironworker with turrent. 220v, 1phase
|
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|