User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 4 matching ads. Now displaying the remaining 4 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 10735 | Combination (teach lathe) CNC / Manual |
2006 |
HAAS |
TL-1 |
Very Good |
sold |
Photo /
More Info. |
: Haas TL-1 CNC Toolroom Lathe
2006 Haas TL-1 CNC or Manual operated lathe Very low hours and used in a home shop and never for production work
Comes loaded with 3 jaw chuck, Dorian Quick change tool post
5 tool holders
tailstock
Haas coolant system
rigid tapping
floppy drive
Royale 5C Air collet closer with foot control ( cost over $2500 )
5C collet nose, 7.5hp, 2,000 rpm,
Lathe can run on single phase 240v power or three phase 230 v power |
|
Ad # 10737 | Turning Center 11 in. & over chuck |
|
Mazak |
QS-30 |
Good |
sold |
Photo /
More Info. |
12" Chuck: QS-30 MAZAK CNC Lathe
Mazak CNC lathe
Machine features a 12 inch chuck and has a 40" center to center
|
|
Ad # 10734 | Turning Center 4 - 10 in. chuck |
1999 |
HAAS |
SL20 |
Good |
sold |
Photo /
More Info. |
8" 3 Jaw Hydraulic Chuck : HAAS SL20 CNC LATHE
1999 Haas SL20 CNC Lathe
8" 3 Jaw Hydraulic Chuck
ATS S20 Pad Type Collet Chuck
Parts Catcher
10 Station Turret
4000 RPM
Extended Memory
|
|
Ad # 10736 | Turning Center 11 in. & over chuck |
1989 |
Mazak |
QT 15 |
Good |
sold |
Photo /
More Info. |
collet lathe: Mazak Quickturn 15 CNC lathe nice machine is in
has a collet chuck, no 3 jaw
have collet sleeves
only cut plastic
New: 1989
Mazatrol Cam T-2 CNC Control
17.3" Max. Swing
20" Max. Centers
2.0" Capacity
15 HP
5,000 RPM
8 Position Tool Turret
|
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 10743 | Vertical Turret Lathe (VTL) |
1940's |
CINCINNATI |
VBM 120 |
Good |
sold |
Photo /
More Info. |
126" max swing: CINCINNATI VBM-120" swing..Actual swing: 126"
ram travel 60"
table dia -84"
65" work height
RPM:0-40
50 HP
NO Pit required
table load over 25 Ton max
Under Power
2 heads
video possible
vintage 1940's no markings on it to give me a date
It now has a variable speed controller for both the main drive and the feeds. This eliminates the need for gearing and makes the speed and feed changes a lot easier
It also has an air clutch installed to eliminate the hard starting that the old system had
There has also been an upgrade to a modern lubrication system (Willie Vogel) which allows for ease of lubrication
no jaws with machine
cost to disasseble and load on truck: $ 10,000 |
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 10849 | Vertical Machining Centers (VMC) |
|
Matsuura |
|
Good |
sold |
Photo /
More Info. |
Travels: X 20" Y 14" Z 17". : This is a great milling machine, that works fine, and is extremely accurate... |
|
We found 8 matching ads. Now displaying the remaining 8 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 10729 | Knee Mills (Bridgeport Type) |
|
Bridgeport |
|
Good |
sold |
Photo /
More Info. |
Table 9"X42": Bridgeport Milling Machine 9 x 42
Variable Spd head
DRO
PWR Feed
Bridgeport 1 1/2HP Milling Machine variable speed
Bridgeport power feed on the X
digital readouts on the X and Y
Table is 9"X42", has Bijur one shot lube
Ways are decent still some scrapings showing Shaper attachment not included
|
|
Ad # 10723 | Knee Mills (Bridgeport Type) |
|
Bridgeport |
|
Good |
SOLD |
Photo /
More Info. |
Swing 16 Inches: Used but in good shape
Mill/Drill Machine
Swing 16 In
Motor HP 1.5,
Voltage 230, 11.5 Amps
Spindle Taper R8
Spindle Speeds 150-3000
Spindle Travel 5 In
|
|
Ad # 10727 | Knee Mills (Bridgeport Type) |
|
Bridgeport |
|
Fair |
sold |
Photo /
More Info. |
: Bridgeport Milling Machine
Bridgeport with variable speed head and much
more tooling
Clamping
Indexing head
fly cutters
240 volt, 3 phase
Ways are tight.
Cannot take delivery until 10/15/10
|
|
Ad # 10726 | Knee Mills (Bridgeport Type) |
|
Bridgeport |
|
Fair |
sold |
Photo /
More Info. |
Table size 9" x 60": Bridgeport milling machine with hydraulic tracer
Specifications: 2 HP motor
220 VAC 3-phase
Taper R8
speeds range 82 to 3810 rpm
quill travel 5”
Table size 9" x 60"
Longitudinal travel 28" (700mm)
Cross travel 12" (300mm)
Vertical knee travel 16" (400mm)
Weight, approx. 3,000 lbs
Hydraulic tracer included as shown
Hydraulic pump not included
Machine measures: L 5’8” X W 4’10” X H“84 H weights 3,000
|
|
Ad # 10724 | Knee Mills (Bridgeport Type) |
1996? |
Bridgeport |
Serries 1 -J2 head |
Very Good |
sold |
Photo /
More Info. |
9 x 48 table :3 axis cnc : BRIDGEPORT CNC MILLING MACHINE
9 x 48 table
BRIDGEPORT MILL WITH THREE AXES DX-32 CONTROL
no manual hand controls
RS232 & floppy drive
auto lube
m function in control
COMES WITH CAT 30 SPINDLE PROGRAMABLE SPINDLE
12" x 30" travel
POWER DRAWBAR
COOLANT SYSTEM AND BOOKS
IN EXCELLENT CONDITION
LESS THAN 100 HOURS
|
|
Ad # 10725 | Knee Mills (Bridgeport Type) |
|
Bridgeport |
Vintage 943 |
Fair |
SOLD |
Photo /
More Info. |
: Vintage Bridgeport milling machine
943 Bridgeport M- Head
Has some tooling
220 3 phase motor with single phase converter
|
|
Ad # 10728 | Knee Mills (Bridgeport Type) |
|
Bridgeport |
|
Fair |
SOLD |
Photo /
More Info. |
: Bridgeport vertical milling machine w/ DRO
Power Feed and varible speed head
|
|
Ad # 10721 | Knee Mills (Bridgeport Type) |
1993 |
Acer |
Ultima 3VK |
Good |
sold |
Photo /
More Info. |
10 x 54 Table: 1993 Acer Ultima 3VK Milling Machine
10x54 Table
3hp variable speed head
(motor just rewound for dual voltage 3ph)
power feed on X axis,
Mitutoyo DRO
Lots of tooling to go with it,
milling vise
rotary table
hold down sets
center finder, etc.
|
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 10745 | Horizontal Band Saws |
new |
Cosen |
MH-1016JA |
Excellent |
sold |
Photo /
More Info. |
10" rounds: SPECIFICATIONS
Round
90°-10" round
45°-9""
Square
90°-9” x 9"
45deg-6.5” x 6.5””
Maximum Cutting
Capacity:
Rectangle
90° H x W-9” x 14.5"
45° H x W-6.5” x 9”
Blade:
Speed-95, 150, 213, 321 fpm--step pulley change
Size-1" x 11’ x .035"
Guides-Tungsten Carbide
Motor: 2HP
Coolant
coolant motor-1/8 hp
Weight 1,010 lbs.
Power 230V, 3 ph, 60 Hz
Shipping Dimensions 72” x 38” x 45”
Floor Space (L x W x H) 69" x 28" x 42.5"
Machine Features:
Machine Structure & Design:
Heavy-duty hydraulic cylinder plus precision
ground hinge support and guide the rugged saw
frame through the entire cutting cycle
Special wear resistant DU bushing is used to
ensure durability and long use life
Cast iron quick set up vise features straight and
miter cuts from 90 to 45 degrees
It enables miter cutting at desired angles via
the large easy-to-read mitering scale
Large rugged base provides support for the heavy
cast, and it comes with built-in coolant &
hydraulic systems to offer both sound stability &
all-in-one convenience
Blade Drive:
A 2 hp motor, heavy-duty reducer, and variable
step drive assembly with excellent mechanical
design feature the essentials for production
cutting.
The 4-speed transmission is equipped with the
best worm gear speed reducer
The worm shaft is hardened and ground. Together,
they provide quiet, powerful, and trouble-free
drive
Blade Guidance & Lubrication System:
Carbide blade guides with roller bearings pre-
align the blade before entering carbide blade
guides This feature reduces wear on blade guides
and blade, thus enhancing blade life
The rigid guide arms are mounted on an extra wide
precision ground dovetail slide for more solid and
supportive surface
This rigid design owes to use of superior cast-
iron which greatly reduces vibration and achieves
better cutting result
Two additional guides located on a central axis
support the blade from the top, giving it extra
penetrating force
The carbide guides are relieved to allow coolant
flow to lubricate and cool the blade as well as
work piece
Integral coolant system.
Blade brush to remove chips from blade gullet
Control & Automation:
Down feed rate & cutting pressure contro
The feed rate may be adjusted by setting the dial
between 0 and 10 via the hydraulic down feed valve
The vast range of adjustment allows proper
setting which results in longer blade life,
shorter cutting times, and better finishes
The control panel is clearly arranged and
centrally located on top of saw head at chest
level
Material Clamping & Feeding:
Cast iron vises
Secure clamping via a dependable manual lead
screw system with anti-slip hand wheel
Safety:
Conduits protect all exposed electric wiring and
hydraulic circuits
Alert orange for blade guards and access doors
Standard Accessories:
Easy blade change with front access at waist
level
Adjustable material stop
Bi-metal saw blade
Operation & parts manual
|
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 10750 | Press Brakes (Hydraulic) |
1992 |
Betenbender |
14 x 120" |
Good |
sold |
Photo /
More Info. |
14' x 120 Ton capacity: Betenbender press brake,
14\GA x 120 ton capacity,
new 1992,
with Hurco single axis BG.
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 10747 | Ironworkers |
|
Scotchman |
|
|
sold |
Photo /
More Info. |
20 ton: Scotchman Ironworker/ shear/ punch/ angle iron shear
20 ton capacity
Older model, but saves money versus drilling &
torching
has punches & small v-block bending die
|
|
Ad # 10749 | Ironworkers |
|
Scotchman |
314 |
Good |
SOLD |
Photo /
More Info. |
30 ton: Scotchman 30 ton Ironworker Mod. 314
50 dies valued at 60.00 per die being given away with machine for free: both going together either way.
|
|
Ad # 10748 | Ironworkers |
|
Scotchman |
|
Very Good |
Sold |
Photo /
More Info. |
: Scotchman Ironworker
This is a lightly used Ironworker in excellent shape ready to go to work
|
|
Ad # 10746 | Ironworkers |
|
Scotchman |
4014T |
Good |
sold |
Photo /
More Info. |
: Scotchman 4014T ironworker
Ironworker with turrent. 220v, 1phase
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|