User SearchYour search results (if any) appear below in groups of 75 for each section.
Manual Lathes
We found 11 matching ads. Now displaying the remaining 11 ads.
FOR SALE: Year - 67? Make - Gisholt Model - 2-L/13W-9137 |
---|
FOR SALE: Ad # 4325 , Year = 67? , Make = Gisholt , Model = 2-L/13W-9137 |
|
Category: Ram Type & Saddle Type Turret Lathes
|
Capacity: Heavy Duty Turret Lathe
|
Ad #
4325 |
Year:
| 67?
|
Make:
| Gisholt
|
Model:
| 2-L/13W-9137
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | Rigging Fee Extra
|
Weight: | 11000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Swing: 24"
Distance Between centers: 60" Spindle Bore: 4.25" 4 way toolpost notes:below air gap and a chuck at 22” and 24” diameters. The 22” clears the ways and the 24” would hit the ways. It also shows the dimension from center of the chuck to a level point across the ways. Dimensions: The total distance outside the ways is 17” (his was 15”). The operator side way is 4 ½” across. The opposite side way is 3” across. The ‘air’ between the ways is 9 ½” (his was 7 ½”). The ways are 1 ¼” thick. The center of the chuck to level across the ways is 11”. The swing is debatable… 22” definitely clears the ways. A circle drawn at chuck center point could be a little less than 24” before touching the ways considering the ‘air gap’ is also on center. Voltage: 575 3 phase… The drive motor, rapid traverse motor and coolant pump most likely can be rewound for 230/460. There is a small multi-tap control transformer inside the control cabinet. It is wired for 575 but has the connections for 230 and 460 as well. Condition: I don’t know if it runs. The headstock and rapid traverse oil site gauges show ‘middle’ of the sight glass bulls eye. Manual etc. I have a manual and what looks to be a complete electrical print. Other stuff: It has a ‘chuck’ switch and ‘inch’ switch. This is used on our other Gisholts to maneuver the chuck so as to insert the chuck wrench. loading fee: $ 800.00
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1968 Make - Gray Model - Series 60 |
---|
FOR SALE: Ad # 10938 , Year = 1968 , Make = Gray , Model = Series 60 |
|
Category: Vertical Turret Lathe (VTL)
|
Capacity: 84" table x 96" under rail
|
Ad #
10938 |
Year:
| 1968
|
Make:
| Gray
|
Model:
| Series 60
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Requires rigger
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- table-84"height under sadle-84"
height under ram face- 96" plus vert travel-48" 3" bore in ram head max swing-96" table top to floor-36" overall mach. height- 14ft. 4 axis DRO system-both rams up/down -left /right pit shown but not required-due to building height restriction Year 1967 or 1968 (not quite sure) This information below was copied from The G.A. Gray Company Bulletin 92. It seems accurate. There is more room under the rail than specified. Machine size 84" Table diameter 84" Height under saddle 84" Height under ram face 92" Height under turret face 96" Vertical travel (below saddle) of ram head (std.) 48" Vertical travel (below saddle) of turret head (std) 30" Vertical travel of side head above table 80" Horizontal travel of ram head 54" Horizontal travel of turret head 57" Horizontal travel of side head ram 32" Travel past center - ram head 1/2" Travel past center - turret head 1/2" Travel of rail 74" Swivel of ram head either side of vertical 45 degrees Size of bore in ram head 3" Size of bore in turret head 3" Maximum swing, with or without side head 96" Feeds per revolution of table (infinitely variable) .002" - .250" Table speed range rpm (infinitely variable) 0.8 - 194 Table top to floor 36 1/4" Overall height machine top to floor 14' -2" Overall height pendant top to floor 18' Overall height top of ram to floor 18' Two range simple transmission 12,000 lbs table load Automatic lubrication Constant surface cutting Power indexing turret head 75 Hp DC table drive All heads are DC drive Rail head AC drive with self leveling feature and automatic locking There is a box full of gears I suspect are for thread cutting and drum scoring 1st I swapped the 5 HP DC drive control for the ram with the drive on the on the turret head. I chose to swap drives rather than repair. 2nd the clutch slips on the turret head when raising/lowering the head. We just put it into the fastest feed to get where we are going in a hurry. The machine has operated like this for at least 8 years and has never bothered us. Everything else works as it should i.e. table, rail, lube pump, way lube feeders etc I believe the machine was made to be floor mounted and we installed it in a pit to lower the overall height of the machine for (1) hoist rail bridge clearance and (2) to keep the table height lower. Currently our hoist rail will not clear the operator station counterweighted davit arm on top of the machine but it really does not need to as we only lift machining parts – not the Gray’s parts. The pit depth is 20.5” and the table height to the floor is 17.5”. If floor mounted it would put the table at 38”. Not a bad working height. The 75 HP DC motor is mounted on the working floor and is belt driven to the table drive sheave in the pit. The DC motor is on a separate frame so I would think it may just be a matter of some shorter belts if both machine and motor were on top of the floor.
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - Make - Bullard Model - 56" Dynatrol |
---|
FOR SALE: Ad # 15970 , Year = , Make = Bullard , Model = 56" Dynatrol |
|
Category: Vertical Turret Lathe (VTL)
|
Capacity: 56" table dia
|
Ad #
15970 |
Year:
|
|
Make:
| Bullard
|
Model:
| 56" Dynatrol
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Rigging Fee Extra
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Bullard 56 dynatrol VTL
56" Bullard Dynatrol Vertical Turret Lathe. 56'' table 66" swing ? under rail 6-jaw chuck 3 heads including a side head.
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1977 Make - American Model - 2516-27 x 216 |
---|
FOR SALE: Ad # 16178 , Year = 1977 , Make = American , Model = 2516-27 x 216 |
|
Category: Heavy Duty Large Lathe 24in. & over swing
|
Capacity: 40" x 18ft
|
Ad #
16178 |
Year:
| 1977
|
Make:
| American
|
Model:
| 2516-27 x 216
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | Not Under Power
|
Shipping Info: | Rigging Fee Extra
|
Weight: | 21,500
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- American manual lathe # 2516-27 x 216
center distance: 216" or 18ft swing over bed: 40" ,over cross slide: 30" chuck: 6 jaw 24" dia 12" steady rest 2.5" spindle bore voltage: 575/3 CATALOGUE STD. SPECIFICATIONS:Hole Thru Spindle 2.5"Swing Over Bed Ways, Rated 40"Swing Over Bed Ways,30"Swing Over Cross-Slide Distance Between Centers 216";Cross-Feed Travel 6"; Tailstock, Spindle Diameter 5"ailstock, Spindle Travel 12";Tailstock, Spindle Taper #5 MT;(27) Spindle Speeds, Range 12 to 800 RPM(66) Carriage Longitudinal Feeds .0025 to .1506 IPR(66) Thread Changes, Range 1 to 60 TPI Motor Horsepower 40
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 93 Make - Poreba Model - TPK 90A-1/3M |
---|
FOR SALE: Ad # 10660 , Year = 93 , Make = Poreba , Model = TPK 90A-1/3M |
|
Category: Hollow Spindle/Big Bore Engine Lathes
|
Capacity: 36" x 132" w/-4.5" spindle bore
|
Ad #
10660 |
Year:
| 93
|
Make:
| Poreba
|
Model:
| TPK 90A-1/3M
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Requires rigger
|
Weight: | 19,000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 36" swing over ways
132" centers 24" 6 jaw chuck tool post 2-steady rests 2-speeds on tale stock
inch/metric threads power rapid travers 36" swing 28" swing over cross slide 4.5" thru hole std specs below-please verify Capabilities Swing over bed 36 1/2" Swing over gap 49" Swing over cross slide 25" Distance between centers ~ 118" or maybe 120" Headstock 21 spindle speeds 9, 11, 14, 18, 22, 28, 35 1/2, 45, 56, 71, 90, 112, 140, 180, 224, 280, 355, 450, 560, 710, 900 Workpiece weight between centers 13,500 lbs. Workpiece weight with 2 steady rest 20,000 lbs Hole through spindle 3 3/4" American standard direct mount spindle nose A1-11 Chuck 24" Buck 6 jaw chuck Feeds and threads Longitudinal (70) ..0043 - .500 IPM Cross feed range (70) .0021 - ..250 IPM Top slide feed range (70) .001 to .125 IPM Metric threads range 1 - 120 mm/rev. Inch threads range 1/4 - 30 TPI Carriage and apron Cross slide travel 18 1/2" Top slide travel 11 3/4" Carriage length bearing bedways 33 3/4" Carriage bridge width 16 1/2" Rapid travels Carriage 260 IPM Cross slide 130 IPM Top slide 65 IPM Six way power feeds/spindle locked standard Reverse feed direction no spindle direction change standard Carriage rear mount chip and coolant splash guard standard Tailstock Quill diameter 5 1/8" with tang slot Quill travel 11 3/4" Quill taper No. 6 MT Two speed quill travel 1:1 and 1:5 ratio Miscellaneous Main drive motor 2 speed AC 23 and 36 HP Width of bed x depth 23" x 17 3/4" Length = between centers + 8 feet Width 7 feet Net weight 19,400 lbs Electrical U.L approved 460 volt 3 phase 60 Hz Standard equipment included Coolant system Automatic headstock lubrication 8T slotted top slide Six way power rapid traverse Chuck splash guards Spindle positive lock at 5 degree increments Longitudinal and cross slide limit switches Ammeter Optional equipment included with it Steady rest 1 37/64" - 15 3/4" roller Steady rest 15 3/4" - 23 1/2" roller Live center 6MT Quick change tool block with holders Digital read out
|
Electrical Description |
|
Comments: |
- very nice machine in use only part time
Costs: Lathe and optional equipment $70,000 24" Buck 6 jaw chuck $8,399.00
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 90,s Make - Logan Powermatic Model - 1120003-TH |
---|
FOR SALE: Ad # 10661 , Year = 90,s , Make = Logan Powermatic , Model = 1120003-TH |
|
Category: Tool Room Lathe 8in. to 14in. swing
|
Capacity: 12x30
|
Ad #
10661 |
Year:
| 90,s
|
Make:
| Logan Powermatic
|
Model:
| 1120003-TH
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 8"-3jaw chuck
light 12"swingx30"
|
Electrical Description |
|
|
|
FOR SALE: Year - 90,s Make - south bend Model - model 400 |
---|
FOR SALE: Ad # 10662 , Year = 90,s , Make = south bend , Model = model 400 |
|
Category: Tool Room Lathe 8in. to 14in. swing
|
Capacity: 12x36
|
Ad #
10662 |
Year:
| 90,s
|
Make:
| south bend
|
Model:
| model 400
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 2"thru hole
10"-3jaw chuck 12" over ways 15" over crosss slide quick ckange tool post steady rest coolant light 2 spd. motor taper attach.
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Bullard Model - 46" cutmaster/# 75 |
---|
FOR SALE: Ad # 10590 , Year = , Make = Bullard , Model = 46" cutmaster/# 75 |
|
Category: Vertical Turret Lathe (VTL)
|
Capacity: 46" bullard cut master
|
Ad #
10590 |
Year:
|
|
Make:
| Bullard
|
Model:
| 46" cutmaster/# 75
|
Condition:
| Needs Work
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: | We can load
|
Weight: | 45,000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 46" cut master-std specs please verify
Capacity: 46" Motor: 40 HP 6.1-187 RPM Under Rail: 48 in. Under Adjustable Rail
Features:
* 3 Jaw Chuck * Adjustable Rail * Side Head * Square Turret * Pendant Control * Coolant
Table Diameter ........................ 46" Maximum Swing W/Side Head ............. 52" Maximum Swing Without Side Head ....... 59" Max. Height Under Rail ................ 44" Turret Stroke ......................... 30" Table Speeds .......................... 6.8-250 RPM Feeds ................................. .006-.125 IPR Machine Weight ........................ 45,000 Lbs EQUIPPED WITH: 4-Position Square Turret Side Head no threading capability have some machine prints
|
Comments: |
- Machine was in middle of being rebuilt when rebuilder past away..so it needs minor finishing-solenoids need put back on machine...was 80% done
|
|
|
FOR SALE: Year - 90s ? Make - Poreba Model - TPK 90A1/3M |
---|
FOR SALE: Ad # 16158 , Year = 90s ? , Make = Poreba , Model = TPK 90A1/3M |
|
Category: Heavy Duty Large Lathe 24in. & over swing
|
Capacity: 36"swing x 120"centers
|
Ad #
16158 |
Year:
| 90s ?
|
Make:
| Poreba
|
Model:
| TPK 90A1/3M
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Rigging Fee Extra
|
Weight: | 12,000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Poreba # TPK 90A1/3M Lathe:
Std. Mfg specs below-please verify actual machines.. 36"swing x 120"centers 24" Dia 6 jaw chuck shown and few other Acc.not shown in pix..steady rest,chuck? DRO-2 axis included Std. Mfg specs below SPECIFICATIONS: SWING OVER BED: 36 1/2" (927 mm) SWING OVER CROSS SLIDE: 25" SWING IN GAP: 49" LENGTH OF GAP: 17" DISTANCE BETWEEN CENTER: 120" (3048 mm) SPINDLE BORE: 3 3/4" SPINDLE NOSE: A1-11 SPINDLE MOTOR: 20/30 HP SPINDLE SPEEDS (2 RANGES): 7.1-710 RPM FEEDS - LONG. (122): .0043-.5 IPM - CROSS (122): .0021-.25 IPM - TOP SLIDE: .001-.125 IPM THREADING - INCH 1/4-30 TPI - METRIC: 1-120 MM/REV CROSS SLIDE TRAVEL: 18 1/2" TOP SLIDE TRAVEL: 11 3/4" RAPID TRAVERSE - LONG./CROSS: 260/130 IPM - TOP SLIDE: 65 IPM TAILSTOCK - DRILLING, DIAMETER: 5 1/8" - DRILLING LENGTH: 40" - TAPER: #6 MT - TRAVEL: 11 3/4" ELECTRICS: 440V/3Ph/60hZ
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1955 Make - Gisholt Model - Turret Lathe 13W-9136 |
---|
FOR SALE: Ad # 143 , Year = 1955 , Make = Gisholt , Model = Turret Lathe 13W-9136 |
|
Category: Ram Type & Saddle Type Turret Lathes
|
Capacity: Large 25" Turret Lathe w/ Tooling
|
Ad #
143 |
Year:
| 1955
|
Make:
| Gisholt
|
Model:
| Turret Lathe 13W-9136
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | Approx.9000lbs
|
Dimension: L x W x H | 15' x 4' x 4' |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Large 6 station Turret Lathe
Swing 25" over ways 18" chuck-3-jaw w/T-slot Length 5'from chuck to turret Misc Tooling 4" spindle bore
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - ? Make - Leblond Model - regal |
---|
FOR SALE: Ad # 14539 , Year = ? , Make = Leblond , Model = regal |
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: 18" x 78"
|
Ad #
14539 |
Year:
| ?
|
Make:
| Leblond
|
Model:
| regal
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 6000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- leblond regal manual lathe
swing over bed-18" swing over cross slide: 12" center distance:80" taper attachment 3 jaw chuck 12" spindle bore 2-1/4" english threading only work light coolant spindle RPM: 38-1500 chuck guard
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 1992 Make - Enshu Model - 650W & 650VX |
---|
FOR SALE: Ad # 16171 , Year = 1992 , Make = Enshu , Model = 650W & 650VX |
|
Category: Vertical Machining Centers (VMC)
|
Capacity: Table Size: 25.6" X 78.7"
|
Ad #
16171 |
Year:
| 1992
|
Make:
| Enshu
|
Model:
| 650W & 650VX
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Rigging Fee Extra
|
Weight: | 21000
|
Dimension: L x W x H | 164 x 122 x 110 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Enshu # 650W & 650VX vertical machining centers
Note: std mfg specs below please verify actual machines-2 machines available Enshu EV-650 CNC 50-Taper CNC Vertical Machining Center Equipped With: ENAC (Fanuc 15M) CNC Control, Remote Jog Handwheel, 6000 Max RPM Cat-50 Taper Spindle, 30 Station Side-Mount Twin-Arm Tool Changer, Diakin Inverter Spindle Chiller, Coolant System with Tank & Pump, Rear Chip Auger, RS-232 Port, Machine Manuals & Schematics as Shown, Large Assortment of Enshu tooling Table Size: 25.6" X 78.7" Machine Travels (X/Y/Z): 63" x 25.6" x 26" Table Capacity: 3300 Lbs. Spindle Taper: Cat 50 Spindle Speeds: 6,000 Max RPM Transmission: Stepless Rapid Traverse Rate (X/Y/Z): 787.4 IPM (X and Y) 590.6 IPM (Z Axis) Maximum Cutting Feed Rate: 393.7 IPM Tool Changer Style: Side-Mount, Twin-Arm Tool Changer Capacity: 30 Stations Tool Change Time: 2.5 Sec Max Tool Length: 15.7" Max Tool weight: 33 LBS Spindle Drive: 20 HP Spindle To Table Distance: 7.9" - 33.9" Spindle Center to Column Distance: 26.4" Enshu 650VX Vertical Machining Center with Fanuc 15M Control Equipped With: Fanuc 15M CNC Control, 30-Position Tool Changer, Spindle Chiller, RS232 Port, Remote Jog Hand Wheel, Table Guarding Description: Vise and Tool Holders NOT Included Manufacturer: Enshu Model: 650VX Year: 1995 Serial Number: 339 Main Unit Approx Weight: 0.00 lbs Main Unit Dimensions (in inches): Length: 193.00" Width: 168.00" Height: 122.00" Components: Coolant Tank: Length: 54.00" Width: 40.00" Height: 29.00" Specs: Machine Control: Fanuc 15M Table Size: 78.7" x 25.6" Machine Travels (X/Y/Z): 63" / 25.2" / 26" Spindle Taper: Cat 50 Spindle Speeds: 6000 RPM Tool Changer Style: Twin Arm Tool Changer Capacity: 30 Note: a few misc holders included as pictured in tool changer
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
FOR SALE: Year - 1988 Make - G and L Model - G50-T |
---|
FOR SALE: Ad # 10841 , Year = 1988 , Make = G and L , Model = G50-T |
|
Category: Horizontal Boring Mills
|
Capacity: Table 48" x 96"
|
Ad #
10841 |
Year:
| 1988
|
Make:
| G and L
|
Model:
| G50-T
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | Requires rigger
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Giddings & Lewis Horizontal Model G50-T year 1988
Capacities: Spindle diameter 5" Spindle taper #50 (CAT 50) Spindle speed (infinitely variable) 14 - 3000 Rpm Spindle travel 36" (Z axis) Headstock travel on column 96" (Y axis) Table size 48" x 96" Table cross travel 96" (X axis) Table load capacity 35,000 lbs. plus (some documentation states 40,000 and some 44,000) Bed length 72" Saddle travel 38" (W axis) Features: Pre-loaded anti-friction ball screws on all linear axis Inductosyn feedback W, X, and Y Resolver feedback Z axis Infinitely variable spindle speeds 4 ranges (4 speed transmission) Power drawbar Lubri-Cool (Hansen) unit for headstock lube system High pressure flood coolant (through the spindle and external) G&L NumeriPath CNC 8000B control Spindle drive (MTDC) 30 HP Control cabinet voltage 480, 3 phase 60 hertz (We are actually 600 3 phase with a local transformer) Allen-Bradley information. The W, X, Y and Z all use the same components. Bulletin 1326 AC Servo Motor Volts: 230 3 phase Frequency: 0 – 250 Hz Serial No.: 28321 Catalog No.: 1326AB-C3E-11-2287B Part No.: 126882 Date Code: 0106 Max Cont Output Power: 7.5 Kw @ 40 degrees C Max Speed: 3000 RPM @ 40 degrees C Max Const.: Stall Torque 310.0 Nm/Lb. In. @ 40 degrees C Max Const.: RMS amperes 49.1 @ 40 degrees C Term. Resistance: 0.055 ohms @ 25 degrees C Brake: None Bulletin 1391 Controller 1391B-AA45 series D Serial No: 07487 GE spindle DC drive information General Electric DC 300 adjustable speed drive
|
|
|
FOR SALE: Year - Make - Model - |
---|
FOR SALE: Ad # 16163 , Year = , Make = , Model = |
|
Category: Manual Mill, Parts and Accessories
|
Capacity: turn tables
|
Ad #
16163 |
Year:
|
|
Make:
|
|
Model:
|
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- turn tables
4ft x 4 ft and larger and smaller
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1954 Make - K & T Model - 10HP-2CK |
---|
FOR SALE: Ad # 142 , Year = 1954 , Make = K & T , Model = 10HP-2CK |
|
Category: Horizontal Mills
|
Capacity: Horiz-Vert mill
|
Ad #
142 |
Year:
| 1954
|
Make:
| K & T
|
Model:
| 10HP-2CK
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | Not Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
NC
|
Country:
|
|
Price:
| $sold USD
|
|
General Description |
- Horiz mill w/ vert attachment
|
Electrical Description |
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - 1994? Make - T-Drill Model - T-150/type-0242 |
---|
FOR SALE: Ad # 10587 , Year = 1994? , Make = T-Drill , Model = T-150/type-0242 |
|
Category: Single Spindle Drill Press
|
Capacity: T-Drill
|
Ad #
10587 |
Year:
| 1994?
|
Make:
| T-Drill
|
Model:
| T-150/type-0242
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- T-Drill
# T-0150 Includes some misc tooling
|
Electrical Description |
|
|
|
FOR SALE: Year - 1977 Make - South Bend Model - MX 75/2500 |
---|
FOR SALE: Ad # 10583 , Year = 1977 , Make = South Bend , Model = MX 75/2500 |
|
Category: Radial Drill Press
|
Capacity: 20" dia column x 8 ft arm..VERY LARGE
|
Ad #
10583 |
Year:
| 1977
|
Make:
| South Bend
|
Model:
| MX 75/2500
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | Requires rigger
|
Weight: | 18,000 ??
|
Dimension: L x W x H | big |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 20" Dia Column
8 ft arm-96" rapids coolant 20 HP motor 5MT spindle 20-1600vrpm T slot std box base 39-3/8" x 29-1/2" x 19"-1000lbs also includes a 0-90 deg (one way) box tilt table-T-slotted 39-3/8" x 29-1/2" x 25-1/2"-1500lbs made in Spain-Quality
updated additional specs below-please verify Model South Bend (Foradia made in Spain and still in business) MX 75/2500 SN# 740003 Column dia. 21 5/8" Arm Length 8' 3-3/4" Spindle HP 12 Drill capacity mild steel 3" Drill capacity cast iron 3-1/2" Tapping mild steel 3" Tapping cast iron 3-9/16" Morse taper No. 5 Spindle nose dia. 3-9/16" Spindle traverse in head 15-3/4" Number of spindle speeds 16 Spindle speed range 4--1600 Number of spindle feeds 12 Range of feeds per revolution .0029" - .0393" Maximum drilling pressure 6300 Lbs. Maximum spindle torque inch/lbs. 5425 Maximum spindle radius center of column to center of spindle 110" Minimum spindle radius center of column to center of spindle 27-3/8" Horizontal traverse of head on arm 82-3/4" Maximum distance spindle to base 80-11/16" Minimum distance spindle to base 80-11/16" Maximum height of column above floor 141-1/2" Maximum height of head above floor 150" Base working surface 107-5/8" x 45" Base height 11-3/4" Base dimensions 142-3/4" x 45-1/2" Number of 7/8" T slots 3 Elevating arm motor HP 3 Coland pump HP 1/2 Net weight 22,708 lbs. not including box table and tilting table I believe the tables are as follows Box table: 39-3/8" x 39-3/8" x 19-3/4 high with 5/8" T slots Vertical and horizontal T slots Tilting table: 39-3/8" x 39-3/8" x 25-1/2" high with 5/8" T slots 3 T slots on top face. Worm gear rotation through 90 degrees. Graduated scale.
|
Electrical Description |
|
Comments: |
- Very low hrs, nice machine
was over 60K new
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
FOR SALE: Year - Make - Marvel Model - 8m8 |
---|
FOR SALE: Ad # 10949 , Year = , Make = Marvel , Model = 8m8 |
|
Category: Vertical Band Saws
|
Capacity:
|
Ad #
10949 |
Year:
|
|
Make:
| Marvel
|
Model:
| 8m8
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 1" blade width
tilts 45deg. either direction 18" throat
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - Make - DoAll Model - 36-R |
---|
FOR SALE: Ad # 10950 , Year = , Make = DoAll , Model = 36-R |
|
Category: Vertical Band Saws
|
Capacity: 36" tilt table
|
Ad #
10950 |
Year:
|
|
Make:
| DoAll
|
Model:
| 36-R
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 36" throat
tilt table 550/3 elect. variable speed 30x60 table 21" height opening
|
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - Make - Marvel Model - 8-M4 |
---|
FOR SALE: Ad # 10944 , Year = , Make = Marvel , Model = 8-M4 |
|
Category: Tilt Frame Vertical Band Saw
|
Capacity:
|
Ad #
10944 |
Year:
|
|
Make:
| Marvel
|
Model:
| 8-M4
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- runs good
tilts 45deg. either direction 18" throat 1" blade
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 5 matching ads. Now displaying the remaining 5 ads.
FOR SALE: Year - Make - grand rapids Model - DW-8 |
---|
FOR SALE: Ad # 15971 , Year = , Make = grand rapids , Model = DW-8 |
|
Category: Pedestal & Bench Grinders
|
Capacity:
|
Ad #
15971 |
Year:
|
|
Make:
| grand rapids
|
Model:
| DW-8
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Grand Rapinds DW-8 -drill grinder
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1996? Make - K.O.Lee Model - B2062H |
---|
FOR SALE: Ad # 15969 , Year = 1996? , Make = K.O.Lee , Model = B2062H |
|
Category: Tool & Cutter Grinders
|
Capacity: table size:5-1/4" x 37-1/4"
|
Ad #
15969 |
Year:
| 1996?
|
Make:
| K.O.Lee
|
Model:
| B2062H
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 1200
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- KO Lee B2062H #tool & cutter grinder
dtocks:32" distance between centers in workhead and tailstock:26" table size:5-1/4" x 37-1/4" sub table:8 x 48" cross movement:7-1/4" table traverse"20" vert column movement:7" column dia:4" mores specs at:http://vintagemachinery.org/pubs/1738/6596.pd f
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1997 Make - Giddings & Lewis Model - 940 |
---|
FOR SALE: Ad # 15968 , Year = 1997 , Make = Giddings & Lewis , Model = 940 |
|
Category: Tool & Cutter Grinders
|
Capacity:
|
Ad #
15968 |
Year:
| 1997
|
Make:
| Giddings & Lewis
|
Model:
| 940
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 2000
|
Dimension: L x W x H | 24" X 30" X 46" H |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Giddings & Lewis 940 Tool Sharpener w/Coolant
Pump & Dust Collector, model HC, approx. footprint of 42" x 70" x 100" tall, 460V, 3ph Exactamatic #HC, grinder, .0625" min to 1" maximum drill capacity std mfg specs below-please verify actual machines Drill Capacity:1/16" X 1" Drill Length:12" Travel:4" Horizontal Mounted Ultra Precision Point Concentric:0.0002" Point Drill Degrees Included Angles:60 To 140 Degree Grinding Wheel Size:12" X 5" Grinding Wheel Width:1" Grinding Wheel Motor:3/4 Hp. Grinding Wheel Speed:1,800 Rpm's Work Head Motor:1/4 Hp Work Head Speeds:1,800 Rpm's Coolant Motor:1/8 Hp Coolant Tank:7-1/2 Gallon Coolant:Yes Guards:Yes Drill Holder:Yes Dust / Mist Collector:Yes Drill Splitter:Yes Drill Bushing Index Plates:Yes Drill Holders With Collects:Yes Grinding Wheel Built-In Cam Former Wheel Dresser:Yes Self Contained Automatic Lubrication System:Yes Point & Angle Can Be Varied By Work Head Angular Adjustment:Yes Over All Dimensions:24" X 30" X 46" H Weight:1,875 Lbs.
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - Make - Oliver of Adrian Model - 600 |
---|
FOR SALE: Ad # 15967 , Year = , Make = Oliver of Adrian , Model = 600 |
|
Category: Tool & Cutter Grinders
|
Capacity: 1/2"-3-4" drill capacity
|
Ad #
15967 |
Year:
|
|
Make:
| Oliver of Adrian
|
Model:
| 600
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Oliver of Adrian large drill sharpner # 600
voltage: 440/3 hp:1.5 The Oliver Model 600 Drill Point Grinder is the ideal machine for sharpening large diameter bits from 1/2" to 3" (76 mm), with the option to increase the maximum drill size to 4" (102 mm). The machine easily handles two flute, three flute and four flute drill bits. Variable included point angels are readily obtained and variable clearance or lip relief angles can be dialed in. The geometry that is best suited for your manufacturing procedures can be added to your drills easily and quickly. A revolving chuck and oscillating grinding wheel spindle are coordinated with a direct gear positive drive. All of the movements involved with sharpening are automatic. The Model 600 Automatic Drill Grinder is supplied with an airdraulic infeed unit that allows the operator to select the rate of infeed and the total amount of stock removal. This feature, combined with the automatic grinding cycle, permits the unit to function without an operator once the loading and operating sequence has been completed. This eliminates the chance of operator error that comes with swing grinding large bits. The machine is also supplied with a tank, pump, splash guards and piping to provide coolant to the grinding area. Heavy duty, powerful and rigid machine Easy to use with minimal training required Covers a wide range of applications Longer lasting drills with burr-free holes Base model grinds 1/2” to 3” diameter drills (2 sets of jaws) Grind from 1/4" to 4” diameter drills with optional 4 sets of jaws Superior wall finish Compatible with spade, parabolic and twist drills The Oliver 600 creates a precision helical drill point, which provides superior penetration and longevity in comparison to a point created by a typical "swing grind" style grinder. In many applications, the Oliver helical point reduces the torque and thrust required by over 20%, resulting not only in a longer lasting bit, but a longer lasting drill machine as well due to less wear and tear. More holes drilled per grind means less downtime that can result in a substantial cost savings. This heavy duty, powerful and rigid grinder will cover a wide range of applications and provide many years of reliable service.
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1996 Make - Giddings & Lewis Model - HC/17822M |
---|
FOR SALE: Ad # 16173 , Year = 1996 , Make = Giddings & Lewis , Model = HC/17822M |
|
Category: Tool & Cutter Grinders
|
Capacity: 1/16"-1.5"
|
Ad #
16173 |
Year:
| 1996
|
Make:
| Giddings & Lewis
|
Model:
| HC/17822M
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 3200
|
Dimension: L x W x H | 92 x 102 plus coolant tank |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- G & L # HC exactamatic Helical point drill
grinder Std mfg specs below -please verify actual machines specifications: Helical1/16" to 1-1/2" (1.55 to 38.0 mm) Wide-Web Helical1/16" to 1-1/2" (1.55 to 38.0 mm) Bickford*1/8" to 1" (3.0 to 25.4 mm) - *Requires two operations to achieve geometry Racon1/8" to 1" (3.0 to 25.4 mm) Conventional1/16" to 1" (1.55 to 25.4 mm) Step drills3/32" to 1/2" (2.4 to 12.5 mm) 3- and 4-fluted drills1/16" to 1-1/2" (1.55 to 38.0 mm) 2, 3 and 4 straight-fluted plug and bottom taps#4 to 7/8" (M3 to M22) Grinding wheelHorizontally mounted; 20" (510 mm) diameter Spindle power3 HP (2.25 kW), 1800 RPM CNC Controlyes Dimensions92" x 102" (2.34 x 2.59 m) plus coolant tank Weight3200 pounds
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 60s Make - Mitts & Merril Model - # 2 Hyd |
---|
FOR SALE: Ad # 16166 , Year = 60s , Make = Mitts & Merril , Model = # 2 Hyd |
|
Category: Keyseaters
|
Capacity:
|
Ad #
16166 |
Year:
| 60s
|
Make:
| Mitts & Merril
|
Model:
| # 2 Hyd
|
Condition:
|
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: | We can load
|
Weight: | 800
|
Dimension: L x W x H | 6 x 4 x 5 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Mitts & Merrill hyd. Keyseater #2 Hydraulic
std mfg general specs below-please verify actual machines GENERAL SPECIFICATIONS Maximum Keyway Length: 12" Maximum Keyway Width: 1-1/4" Largest Standard Post: 2-3/8" Largest Bore Possible to Keyway: 6" Height Floor to Table: 35" Cutting Speed: 16 ft. per min. Return Speed: 32 ft. per min. Feed, Automatic: .002" to .010" Table Size: 16" x 16"
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - Make - SpeedLap Model - SNF-24BTW |
---|
FOR SALE: Ad # 16159 , Year = , Make = SpeedLap , Model = SNF-24BTW |
|
Category: Lapping & Polishing Machines
|
Capacity:
|
Ad #
16159 |
Year:
|
|
Make:
| SpeedLap
|
Model:
| SNF-24BTW
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Not Under Power
|
Shipping Info: | We can load
|
Weight: | 800
|
Dimension: L x W x H | 4 x 4 x5 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Speedlap 24
lapping machine
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - Make - Tooling Model - |
---|
FOR SALE: Ad # 16162 , Year = , Make = Tooling , Model = |
|
Category: Miscellaneous / Other
|
Capacity: lots of misc tooling
|
Ad #
16162 |
Year:
|
|
Make:
| Tooling
|
Model:
|
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Misc totes of all types of machine shop tooling
clamps lathe cutters milling
|
|
|
FOR SALE: Year - Make - Acorn table Model - 5 x 5 |
---|
|
Mouseover Thumbnail to Enlarge |
FOR SALE: Ad # 16160 , Year = , Make = Acorn table , Model = 5 x 5 |
|
Category: Miscellaneous / Other
|
Capacity: 5 x 5ft
|
Ad #
16160 |
Year:
|
|
Make:
| Acorn table
|
Model:
| 5 x 5
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: | We can load
|
Weight: | 500 ea
|
Dimension: L x W x H | 5 x 5ft |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Acorn welding fixturing tables
Note:no legs for it,slight machining groove on sides of top size approx 5ft x 5ft
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
FOR SALE: Year - Make - ransome Model - E8760 |
---|
FOR SALE: Ad # 16172 , Year = , Make = ransome , Model = E8760 |
|
Category: Misc. Sheetmetal Equip.
|
Capacity:
|
Ad #
16172 |
Year:
|
|
Make:
| ransome
|
Model:
| E8760
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Ransome tube/tank Turning rolls
84" dia max several other sets available-must see
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - Make - Pullmax Model - X8 |
---|
FOR SALE: Ad # 16170 , Year = , Make = Pullmax , Model = X8 |
|
Category: Misc. Sheetmetal Equip.
|
Capacity:
|
Ad #
16170 |
Year:
|
|
Make:
| Pullmax
|
Model:
| X8
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 800
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Pullmax X-8 beveler unit
std.mfg specs below-please verify actual machines MODEL ................................ X8 MAXIMUM V-GROOVE DEPTH (MILD STEEL) .. 3/8" MAXIMUM V-GROOVE DEPTH (STAINLESS) ... 9/32" CUTTING SPEED ........................ 6 TO 11 FPM ANGLE OF BEVEL ....................... 37-1/2 DEGREES MAXIMUM MATERIAL THICKNESS ........... 2" MAIN MOTOR ........................... 2-1/2hp voltage wired 575/3
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1977 Make - Blue Valley Model - 9-227 |
---|
FOR SALE: Ad # 10588 , Year = 1977 , Make = Blue Valley , Model = 9-227 |
|
Category: Crimping, Beading & Flanging Machines
|
Capacity: 1" thick Mtl capacity
|
Ad #
10588 |
Year:
| 1977
|
Make:
| Blue Valley
|
Model:
| 9-227
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Head Knuckling flanger
main drive motor 50hp 575 vlts 3 phs. 1650 rpm hyd. unit 5hp-- 575 vlt 3phs. 1750 rpm tooli1"r,2"r,2 3/4 r, 3 1/2r,4 1/2 r,5r, 5 3/4 r,6r,7 1/4 r,8r,10r,12r,14r small head adapter included chamfer cutting att. included
1" thick Mtl capacit tooling each worth 4-6k each
|
Comments: |
- the tooling is worth more than the asking price of the whole machine runs great
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - Make - Engineering & Research& R Model - HD |
---|
FOR SALE: Ad # 11010 , Year = , Make = Engineering & Research& R , Model = HD |
|
Category: Crimping, Beading & Flanging Machines
|
Capacity: metal former
|
Ad #
11010 |
Year:
|
|
Make:
| Engineering & Research& R
|
Model:
| HD
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 1500
|
Dimension: L x W x H | 3 x 4' x 4 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- former
vari speed drive upgraded
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - 1992 Make - Conrac Model - 369 |
---|
FOR SALE: Ad # 10586 , Year = 1992 , Make = Conrac , Model = 369 |
|
Category: Swagers
|
Capacity:
|
Ad #
10586 |
Year:
| 1992
|
Make:
| Conrac
|
Model:
| 369
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- some dies included
specs to follow
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - PHI Model - 369 |
---|
FOR SALE: Ad # 10585 , Year = , Make = PHI , Model = 369 |
|
Category: Swagers
|
Capacity:
|
Ad #
10585 |
Year:
|
|
Make:
| PHI
|
Model:
| 369
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Swager
some tooling/dies Tech specs to follow
|
Electrical Description |
|
|
|
We found 16 matching ads. Now displaying the remaining 16 ads.
FOR SALE: Year - Make - Worthington Model - Worthington-30 |
---|
FOR SALE: Ad # 10945 , Year = , Make = Worthington , Model = Worthington-30 |
|
Category: Welding Positioners
|
Capacity: 48" table
|
Ad #
10945 |
Year:
|
|
Make:
| Worthington
|
Model:
| Worthington-30
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold sold USD
|
|
Buyers Premium:
A 10 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- will hold 3000lb part
48" table power tilt needs some work
|
|
|
Buyers Premium:
A 10 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - Make - Ransome Model - 12x12manipulator |
---|
FOR SALE: Ad # 10943 , Year = , Make = Ransome , Model = 12x12manipulator |
|
Category: Misc. Welding Equip. / Acc
|
Capacity: 12 FT. x 12ft Manipulator
|
Ad #
10943 |
Year:
|
|
Make:
| Ransome
|
Model:
| 12x12manipulator
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 12 ft x 12 ft
all tooling we have with it The basic machine is in good condition. I have 24 new Cam-Rol bearings that I was going to install but decided we did not need the unit as it is really too small for what we currently manufacture. The machine will need a forward/reverse contactor for boom up/down. It will also need a 1/2 HP DC drive motor and electronic controller plus a right angle gearbox and pinion for the boom in/out operation. I would need to spend about $1000.00 to purchase and install all of the parts it needs to be 100% usable. The new Cam-Rol bearings are worth $1000.00 alone. The 12' x 12' means it will weld a tank or whatever on a set of turn rolls that could be as much as 12' in diameter plus
|
Comments: |
- all the tooling goes with it
|
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - Make - Aronson Model - HD250CS |
---|
FOR SALE: Ad # 10947 , Year = , Make = Aronson , Model = HD250CS |
|
Category: Welding Positioners
|
Capacity: 48"x48" 3000# cap.
|
Ad #
10947 |
Year:
|
|
Make:
| Aronson
|
Model:
| HD250CS
|
Condition:
| Needs Work
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 70's Make - Model - 6ft |
---|
FOR SALE: Ad # 10948 , Year = 70's , Make = , Model = 6ft |
|
Category: Welding Positioners
|
Capacity: 6ft.x6ft table, 10,000 lb plus capacity
|
Ad #
10948 |
Year:
| 70's
|
Make:
|
|
Model:
| 6ft
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 8000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 6ft dia table
10,000lb plus capacity 90 deg tilt machine is in good working condition There is no name on it ,although there could have been. I have no manual for it. I upgraded the DC drive to current technology and the DC motor is relatively new.
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - Make - P&H Model - WP6 |
---|
FOR SALE: Ad # 10951 , Year = , Make = P&H , Model = WP6 |
|
Category: Welding Positioners
|
Capacity: 6ft.x6ft. 6000# cap./9000# other way
|
Ad #
10951 |
Year:
|
|
Make:
| P&H
|
Model:
| WP6
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- very good shape
6ft.x6ft. 6000# cap./9000# other way
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - Make - Ransome Model - 10-P |
---|
FOR SALE: Ad # 10946 , Year = , Make = Ransome , Model = 10-P |
|
Category: Welding Positioners
|
Capacity: 30"x30" table
|
Ad #
10946 |
Year:
|
|
Make:
| Ransome
|
Model:
| 10-P
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- power tilt tables
30 " table 1000lb capacity 2 machines AVAILABLE
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - Make - Acme Model - PT2-4-8125 |
---|
FOR SALE: Ad # 4324 , Year = , Make = Acme , Model = PT2-4-8125 |
|
Category: Spot Welders
|
Capacity: 42" THROAT ACME SPOT WELDER
|
Ad #
4324 |
Year:
|
|
Make:
| Acme
|
Model:
| PT2-4-8125
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: | 2000lbs
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 45" Throat
125 KVA Power supply with controls for weld time, power, dwell etc Water Cooled Head style : Soar
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - Make - Tatylor Hatfield Model - ERB-30-150 |
---|
FOR SALE: Ad # 10937 , Year = , Make = Tatylor Hatfield , Model = ERB-30-150 |
|
Category: Spot Welders
|
Capacity: 150 KVA W/ 36" throat
|
Ad #
10937 |
Year:
|
|
Make:
| Tatylor Hatfield
|
Model:
| ERB-30-150
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 150 KVA
36" max throat depth TJ Snow control water cooled Unitrol Solutions Controller
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - Make - Acorn & others Model - various |
---|
FOR SALE: Ad # 10744 , Year = , Make = Acorn & others , Model = various |
|
Category: Misc. Welding Equip. / Acc
|
Capacity: Acorn style welding platens/tables-all sizes
|
Ad #
10744 |
Year:
|
|
Make:
| Acorn & others
|
Model:
| various
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Some tables are Acorn brand others are not
4' x 4' ---3 pcs---1295.00ea 5 x 5' ---25pc-1495.00 ea 6' x 5'---20pc-1750.00ea
We can remove legs and load on truck.
Some with perimeter frames, some with angle legs and some with no legs. Some acorn style tables have a 1-3/4", 1-5/8" or 1-1/2" square hole in them....
|
|
|
FOR SALE: Year - Make - Pandjiris Model - 2-5MVRHT |
---|
FOR SALE: Ad # 11246 , Year = , Make = Pandjiris , Model = 2-5MVRHT |
|
Category: Welding Positioners
|
Capacity: 18" Dia
|
Ad #
11246 |
Year:
|
|
Make:
| Pandjiris
|
Model:
| 2-5MVRHT
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Panjiris 18" positioner
manual tilt dial 4ft plate mounted on top works well The table tilts, runs forward and reverse and the speed control works. It would cleanup nice. The speed reducer is mechanical and off-the-shelf WW Grainger. It could be converted very easily to DC or variable frequency AC.
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - Make - Panjiris Model - 2-5MVRHT |
---|
FOR SALE: Ad # 11247 , Year = , Make = Panjiris , Model = 2-5MVRHT |
|
Category: Welding Positioners
|
Capacity: 18" dia
|
Ad #
11247 |
Year:
|
|
Make:
| Panjiris
|
Model:
| 2-5MVRHT
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 1000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 18" Dia base table
20" dia top plate manual tilt gear box has broken cover plate 250 lb capacity
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - Make - custom Model - |
---|
FOR SALE: Ad # 11250 , Year = , Make = custom , Model = |
|
Category: Butt & Seam Welders
|
Capacity: seemer fixture- clamping system
|
Ad #
11250 |
Year:
|
|
Make:
| custom
|
Model:
|
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- seemer fixture- clamping system
1/4" capacity 70" sheet length pneumatic hold down There is no welder power supply or mig or tig head. buyer would have to supply that. There is no welder, tig or mig head for it. We ran a ‘Bugo’ head with track. 2. It will clamp any thickness from 0.0 to ~.0.250. Air pressure can regulated the clamping force. 3. What it will weld (thickness, carbon steel, stainless, aluminum etc) is a function of the welding power supply and head chosen. We built this unit many years ago to build 16 ga stainless tanks. We also used it to ‘butt weld’ sheets of stainless together. We have used mig, tig and cold wire tig with it. It is just a ‘homebuilt’ unit. We used it last year when we manually ‘tigged’ some stainless sheet together.
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - Make - Model - |
---|
FOR SALE: Ad # 11248 , Year = , Make = , Model = |
|
Category: Misc. Welding Equip. / Acc
|
Capacity: many sizes--tank rollers
|
Ad #
11248 |
Year:
|
|
Make:
|
|
Model:
|
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: |
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- tank rollers
many sizes see pix
|
|
|
FOR SALE: Year - Make - Phoenix Model - 700-BT |
---|
FOR SALE: Ad # 11109 , Year = , Make = Phoenix , Model = 700-BT |
|
Category: Misc. Welding Equip. / Acc
|
Capacity: Powered flux oven / rod oven
|
Ad #
11109 |
Year:
|
|
Make:
| Phoenix
|
Model:
| 700-BT
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 2000
|
Dimension: L x W x H | 4 x 4 x 5 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- This rod oven could easily be used for a powered flux oven as it will hold a
lot. 3 phase 480 volts Capacity 700 lbs of rods Temperature 0-1000 degrees with profile programmer and timer - rod re-bake, re-condition oven.
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - Make - Dry-Rod Model - |
---|
FOR SALE: Ad # 11083 , Year = , Make = Dry-Rod , Model = |
|
Category: Misc. Welding Equip. / Acc
|
Capacity: welding rod ovens
|
Ad #
11083 |
Year:
|
|
Make:
| Dry-Rod
|
Model:
|
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 19-units total units available -
17-Dry Rod brand ovens-450.00each2 unknown brand Note: all but 2 are dry rod brand name units These rod ovens are typical of what most shops would need 1 phase most are 120 volts but some are 120/240 850 watts on some 1000 watts on others Capacity 350 lbs of rods Temperature range 100-550 degrees F
Quantity of 2 unknown brand at this time but very similar to Phoenix type 300: These rod ovens are typical of what most shops would need Voltage and wattage unknown but should be 120 or 120/240 Capacity 350 lbs of rods Temperature 100-550 degrees F is most likely
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1990 Make - Pandjiris Model - |
---|
FOR SALE: Ad # 11009 , Year = 1990 , Make = Pandjiris , Model = |
|
Category: Butt & Seam Welders
|
Capacity: seam welder 78"
|
Ad #
11009 |
Year:
| 1990
|
Make:
| Pandjiris
|
Model:
|
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 6500
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Pandjiris seamer
78" travel water cooled arc voltage control used for cold water TIG now miller cooler 300Amp water cooled system includes walkway X & Y manual slide option
|
Electrical Description |
|
Comments: |
- The hardware on the machine currently is Cold Wire Tig. The welding power supply is a 300 plus amp DC unit. We used it mostly to weld 11 ga. 304 and 316. I suspect we also welded 16 ga. with it. There is really no reason it would not weld it. It’s just a matter of synchronizing amperage and wire feed rate to get an acceptable weld. A MIG or Sub arc head could also be used although the power supply, weld head and feeder would need to be changed. The base extension is bolted and can be removed. The person who operated is now a full time fire fighter. He does come in to run it when we have a job. I’m sure we can make arrangements to have him here for a demonstration. The mechanical operation is very simple. The prospective buyer needs to know how to weld. I have no problem with anyone making a video. Pandjiris is still in business, Powcon and Cyclomatic are serviced by ARC incorporated in California. I don’t know the weight but would guess between 4000 and 6500 pounds. We can load it and I don’t see any reason to disassemble it.
Basically these are the components that are included if we sell it.
Pandjiris seamer with water cooled mandrel bar, pneumatic hold downs and sheet lineup gauge, infinite speed control of weld head travel Powcon 460/3phase constant current power supply for TIG use. The current output is adjustable up to 300 plus amps. It has high frequency start. Water cooled (Miller closed circuit cooler) cold wire TIG torch. The feeder unit has infinite wire speed control. Torch height control uses arc length to keep the tip of the tungsten and welded material constant.
Our larger JetLine seamer has a MIG unit on it and at one time had a TIG unit. We still run the Pandjiris but not as much as we used to. The Pandjiris portion runs on 120 single phase. The welder is strapped for 440 3 phase. The unit as far as I know and based on the documentation can be strapped 440 or 220. I cannot read the data plate on top of the welder but everyone of them I have taken apart was dual voltage and a not on ARC Products Inc. web site shows the strapping links in 220 and 440.
If we sell it there is a walkway/platform that goes with it. Your pictures may show a large Miller welder beside it. The Miller welder is not part of it. The red colored Powcon is the welder that goes with it. In fact I have another Powcon just like it I would sell.
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - Make - Greenerd Model - # 4 |
---|
FOR SALE: Ad # 16174 , Year = , Make = Greenerd , Model = # 4 |
|
Category: Manual Arbor Press
|
Capacity:
|
Ad #
16174 |
Year:
|
|
Make:
| Greenerd
|
Model:
| # 4
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Greenerd # 4 floor type heavy duty arbor press
Famco # 2 arbor press bench top Dake # 1-1/2 B arbor press bench top,ratchet type
|
|
|
FOR SALE: Year - Make - Custom Model - 350 Ton |
---|
FOR SALE: Ad # 10589 , Year = , Make = Custom , Model = 350 Ton |
|
Category: Hydraulic 4 Post Press
|
Capacity: 350 ton
|
Ad #
10589 |
Year:
|
|
Make:
| Custom
|
Model:
| 350 Ton
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Requires rigger
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 200 ton
182" between opening was used to make tank domes-dishes new controls
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - Make - Johnson gas Apparatus Model - 615KA |
---|
FOR SALE: Ad # 11011 , Year = , Make = Johnson gas Apparatus , Model = 615KA |
|
Category: Heat Treat Related Equipment-Misc.
|
Capacity: lead smelter
|
Ad #
11011 |
Year:
|
|
Make:
| Johnson gas Apparatus
|
Model:
| 615KA
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- lead smelter
natural gas 156 BTU/hr
|
Electrical Description |
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - ? Make - P & H Model - |
---|
FOR SALE: Ad # 16161 , Year = ? , Make = P & H , Model = |
|
Category: Cranes/Hoists & Manipulators
|
Capacity: 1 ton x 10ft
|
Ad #
16161 |
Year:
| ?
|
Make:
| P & H
|
Model:
|
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Jib Crane P & H
1/2" ton capacity hoist approx 12 ft tall 4 units available remote pendant 3 units with 10 ft arm, one with 25ft arm 110/1 voltage Note:recently have been disasemmbled for easy loading
|
Electrical Description |
|
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
FOR SALE: Year - 1993 Make - JBI Model - EA-24SB |
---|
FOR SALE: Ad # 10712 , Year = 1993 , Make = JBI , Model = EA-24SB |
|
Category: Painting / Coating Equipment
|
Capacity: 16' x 24'
|
Ad #
10712 |
Year:
| 1993
|
Make:
| JBI
|
Model:
| EA-24SB
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: |
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 16 ft x 24 ft
top mount blower exhaust system lighted sprinkler system buyer must dissasemble-we can load onto truck
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 90,s Make - Empire Model - PF3648 w/ DCM 80A |
---|
FOR SALE: Ad # 10663 , Year = 90,s , Make = Empire , Model = PF3648 w/ DCM 80A |
|
Category: Bead & Shot Blasters
|
Capacity: 44x26x29
|
Ad #
10663 |
Year:
| 90,s
|
Make:
| Empire
|
Model:
| PF3648 w/ DCM 80A
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Empire PF3648 with a DCM 80A dust collector unit all operating on 115 VAC.
dust collector system included turntable inside dimensions:44x26x29 Specifications that for a new PF3648SC that is very similar to ours. Overall Dimensions::: Height: 72" Width: 38" Depth: 54" Working Dimensions: Height: 36" Width: 36" Depth: 48" L/R Side Door: 32" x 29" Window: 22" x 14" Safety Glass With Quick-Change Frame Construction: 14 Gauge Steel Gun Assembly: Foot Operated: 14 CFM @ 90-100 PSI Electrical: 110 Volt Dust Collector: DCM-80A Dust Collector with pneumatic shaker and fabric tube filters (1 HP; 110 Volt) Rubber Cloth-Lined Gloves Two 120-Watt Flood Lights Dust-Off Gun Pneumatic Foot-Treadle Control Air Pressure Regulator & Gauge General Purpose Air Filter Media Regulator Leveling Bolts 3/16" Perforated Floor With 1000 Pound Capacity Ventilation Rate: 400 CFM The unit has the optional rubber hanging curtains on the doors and back of the cabinet to protect the metal surfaces from erosion. It also has the internal rotating table (1000Lb. capacity). The DCM 80A filtration unit has tube filters with a pneumatic shaker and dump tray in the bottom. Much more expensive and higher quality than a vacuum only system.
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 90,s Make - Profinish Model - Model-PF3640 |
---|
FOR SALE: Ad # 10664 , Year = 90,s , Make = Profinish , Model = Model-PF3640 |
|
Category: Bead & Shot Blasters
|
Capacity: 36x48x32high
|
Ad #
10664 |
Year:
| 90,s
|
Make:
| Profinish
|
Model:
| Model-PF3640
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- bag/filter reclaim system with machine
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - Make - blast it all Model - |
---|
FOR SALE: Ad # 11249 , Year = , Make = blast it all , Model = |
|
Category: Bead & Shot Blasters
|
Capacity:
|
Ad #
11249 |
Year:
|
|
Make:
| blast it all
|
Model:
|
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- specs to come
interior cabinet size: abrasive seperator light
|
Electrical Description |
|
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|