Your search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 54 matching ads. Now displaying the remaining 54 ads.
FOR SALE: Year - 1997 Make - POREBA Model - TRP-93N
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7083 , Year = 1997 , Make = POREBA , Model = TRP-93N
Category:Turning Center 11 in. & over chuck
Capacity: One (1) 1997 POREBA TRP-93N
Ad #7083
Year:
1997
Make:
POREBA
Model:
TRP-93N
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
18,730 Lbs
Dimension: L x W x H
185" x 90" x 80"
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$SOLD USD
General Description
One (1) 1997 POREBA TRP-93N
Swing Over Guideways 36.6" Swing Over Saddle 21.6" Distance Between Centers 118" Workpiece Weight, In Chuck 1,800 lbs Workpeice Weight Between Centers 10,000 lbs Headstock Spindle Spped Range Infinitley Variable 1 to 350 RPM Number of Ranges 2 Spindle Nose A1-20 Front Bearing 14.75" Spindle Bore 12.50" Main Drive 40 HP Continuous 49 HP (50% Duty Cycle) Cross Slide Travel X Axis 21.5" Working Geed Range Axis X .0001-9.8 Working Feed Range Axis Z .0001-9.8 Rapid Travel Z Axis 157 IPM Rapid Travel X Aixs 157 IPM Feed Thrust Z Aixs 5,500 Lbs Ball Screw X Axis 1.57" Ball Screw Z Axis 2.5" Carriage Length Bearing on Bedways 27.5" Width of Cross Slideways 9.8" Eight Position Sauter Tool Turret, Sauter 8 Pos Disk Turret Model 0.5.480.52 Tool Size ACC to VDI3425 50 MM Max Permissible Cutting Torque at Radial Tool Overhang of 12.5": 53,000 Admissible Feed Force (Axis Z) 44,000 LBF Swivel time for 180 deg Index 3.0 Sec Indexing Precision (+/-) 4.0 Repetitive Precision (+/-) 1.6 Tailstock Quill Diameter (Taper) 5.11 (MT6) Quill Travel 11.80" Two Speed Quill Movement 1:1 & 1:5 Tailstock Set Off (+/-).6" Width of Bed 23.00"
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7080 when Inquiring
Asking Price: $Sold
Buyers Premium:A 7 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7078 when Inquiring
Asking Price: $Sold
Buyers Premium:A 7 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1998 Make - Hitachi-Seiki Model - HT23J
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7062 , Year = 1998 , Make = Hitachi-Seiki , Model = HT23J
Category:Turning Center 4 - 10 in. chuck
Capacity: One (1) 1998 Hitachi-Seiki HT23J
Ad #7062
Year:
1998
Make:
Hitachi-Seiki
Model:
HT23J
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
Buyers Premium: A 7 % Buyers Premium applies to the final sale price of this item
General Description
One (1) 1998 Hitachi-Seiki HT23J
Max Turning Dia 13.30" Max Turning Length 24.80" Max Swing 17.70" Kitagawa Hydraulic Chuck 10" Max Bar Capacity 2.75" HeadstockA2-8 Spindle Nose 3.000" Bore 20-4000 RPM 20 HP Tailstock#5MT Quill Center 20.500" Body Travel Standard Turret10 Position Axis TravelX-8.200" Z-24.80" 1181 IPM Traverse Rate
Equipped With: Siecos J CNC Control Tool Eye Chip Conveyor
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7062 when Inquiring
Asking Price: $Sold
Buyers Premium:A 7 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1985 Make - Dianichi Model - MG-63
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7051 , Year = 1985 , Make = Dianichi , Model = MG-63
Category:Turning Center 4 - 10 in. chuck
Capacity: One (1) 1985 Dianichi MG-63
Ad #7051
Year:
1985
Make:
Dianichi
Model:
MG-63
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
Mexico
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
One (1) 1985 Dianichi MG-63
Swing Over Bed 24.822" Swing Over Carriage 13.79" Bed Width 18.912" Formation of Main Spindle Edge JIS A1-11 Diameter of Front Bearing For Main Spindle 5.516" Diameter of Main Spindle Through Hole 3.349" Diameter of Main Spindle Tapered Hole (1/10 metric taper) No 100 Diameter of Tailstock Spindle 3.546" Size of Center MT # 5 Width of Crossslide 11.032" Tool Rest Type Automatic Square Tool Rest Size to Tool 0.985" x 0.985" Max Movable Distance of X Axis 12.608" Max Movable Distance of Tailstock Spindle 5.91" 10" Chuck
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7051 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7052 when Inquiring
Asking Price: $Sold
Buyers Premium:A 7 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1999 Make - Dianichi Model - F-25
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7050 , Year = 1999 , Make = Dianichi , Model = F-25
Category:Turning Center 4 - 10 in. chuck
Capacity: One (1) 1999 Dianichi F-25
Ad #7050
Year:
1999
Make:
Dianichi
Model:
F-25
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
10,200 lbs
Dimension: L x W x H
104" x 60" x 67"
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
One (1) 1999 Dianichi F-25
Swing Over Bed 19.6" Center Distance 24.4" X Axis Travel 6.89" Z Axis Travel 26.4" Spindle Speed 35-3500 RPM Turret 10 Station Spindle Nose A2-8 Spindle Bore 3.1" Bar Capacity 2.5" Motor HP 20 HP 10" 3 JAwHydraulic Chuck Equipped With 10" 3 Jaw Hydraulic Chuck Chip Conveyor 14" Color CRT on Control
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7050 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 7059 , Year = 1982 , Make = HES , Model = 600
Category:Turning Center 11 in. & over chuck
Capacity: One (1) 1982 HES 600
Ad #7059
Year:
1982
Make:
HES
Model:
600
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
18,000 lbs
Dimension: L x W x H
120" x 86" x 84"
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
One (1) 1982 HES 600
Fanuc 6T Control 40 HP Option 12 Position Turret 15" Chuck A1-8 Spindle New Bearing Z Axis 30 Deg Slant Bed Auto Lube System 3 Speed Headstock Automatic Hydraulic Tailstock # 4 Taper Swing Over Bed 24" Swing Over Cross Slide 12 1/2" Distance Between Centers 122" 3" Bore Z Axis Travel 66" X Axis Travel 14 3/4 Rapid 320 IPM
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7059 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1987 Make - DAEWOO Model - Puma 6
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7049 , Year = 1987 , Make = DAEWOO , Model = Puma 6
Category:Turning Center 4 - 10 in. chuck
Capacity: One (1) 1987 DAEWOO Puma 6
Ad #7049
Year:
1987
Make:
DAEWOO
Model:
Puma 6
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
8,140 lbs
Dimension: L x W x H
87" x 61" x 63"
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item
General Description
One (1) 1987 DAEWOO Puma 6
Swing Over Bed 20" Swing Over Carriage 12.2" Recom Turing Dia/Length 6.5/14.6 Max Turning Dia 14.6" Max Bar Working Dia 1.58" Chuck Size 6.5" Spindle Nose/Bore A2 #5/1.8 Bearing Dia front/rear 3.1/2.8 Spindle Speed 60-6000 RPM Spindle Motor Cont/ 30 Min 11/15 HP Quill Dia/ Stroke 2.6/4.0 Taper of Center MT # 3 Travel Distance X/Z 7.9/15.0 Electric Power Supply 30 KVA Fanuc 6T 30 deg Slant Design Hydraulic Tlsk 10 Station Bolt on turret 6" Kitagawa 3 Jaw Chuck Powerful 15 HP (11 Kw) AC Spindle Motor Fast 945 IPM (24 m/min) Rapid Traverse Rigid One Piece Meehanite Cast Iron Bed Hardened and Ground Box Way Construction Precision 6000 RPM Cartridge Spindle Non Stop Bidirectional Turret Indexing Double end Pretensioned Ball Screw Support State of the Art 32 Bit Fanuc Controller
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7049 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1998 Make - CITIZEN Model - L-20VII
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7047 , Year = 1998 , Make = CITIZEN , Model = L-20VII
Category:Swiss Type Automatic
Capacity: One (1) 1998 CITIZEN L-20VII
Ad #7047
Year:
1998
Make:
CITIZEN
Model:
L-20VII
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
One (1) 1998 CITIZEN L-20VII
Max Bar Capacity 0.812" Main and Sub Spindle Speeds 10,000 RPM (M) 8000 (S) Live Milling Speeds 200-5000 RPM # of Live Tool Positions 4 # of OD 6 # of ID 6 (3 front, 3 back) Spindle Motor (with step up ratio) 4.96 HP Main Spindle Indexing C Axis Sub Spindle Indexing 1 deg Equipped With Canned Cycle for Drilling C Axis on Main Spindle 1 Degree on Back Spindle User Macros Main/Back Spindle Synch Control Mitsubishi meldus Windows Based CNC
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7047 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6990 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6937 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6936 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6876 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6878 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6740 when Inquiring
Asking Price: $Sold
Buyers Premium:A 7 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6733 when Inquiring
Asking Price: $Sold
Buyers Premium:A 7 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6730 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1991 Make - NAKAMURA TOME METHODS Model - SL-3B
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6643 , Year = 1991 , Make = NAKAMURA TOME METHODS , Model = SL-3B
Category:Turning Center 11 in. & over chuck
Capacity: NAKAMURA TOME METHODS Slant SL-3B 2-axes CNC Turning Center
Ad #6643
Year:
1991
Make:
NAKAMURA TOME METHODS
Model:
SL-3B
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
12,500 lbs
Dimension: L x W x H
13' x 74.4" x 83.5"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
NAKAMURA TOME METHODS Slant SL-3B 2-axes CNC Turning Center
Max. swing over door 22.05” Max. swing over slide cover 27.17” Max. swing over bed 31.1” Max. swing over cross slide 18.9” Max. turning diameter 15.75” Max. turning length 21.26” Max. distance between spindle nose and turret face 30.31” Min. distance between spindle nose and turret face 7.48” Hole through Spindle 3.15” Spindle nose A1-8 Hole through draw tube 2.56” Round collet capacity 2.50” Spindle speed range 10 to 3500 RPM X-axis travel 10.83” Z-axis travel 22.83” X-axis rapid traverse rate 395 IPM Z-axis rapid traverse rate 590 IPM Tailstock quill center size No.3 M.T. Tailstock quill stroke 3.94” Tailstock quill diameter 3.54”
EQUIPPED WITH:
12” Dia. 3-jaw power chuck Tailstock with built-in live center 12-Station turret with large amount of holders Tool eye arm Automatic chip conveyor Work light Flood coolant system 25 H.P. Spindle drive Motor Fanuc 11T-A Control, Swivel pendant mount, Color CRT, RS232 port
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6643 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1992 Make - NAKAMURA TOME METHODS Model - SL-3B
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6644 , Year = 1992 , Make = NAKAMURA TOME METHODS , Model = SL-3B
Category:Turning Center 11 in. & over chuck
Capacity: NAKAMURA TOME METHODS Slant SL-3B 2-axes CNC Turning Center
Ad #6644
Year:
1992
Make:
NAKAMURA TOME METHODS
Model:
SL-3B
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
12,500 lbs
Dimension: L x W x H
13' x 74.4" x 83.5"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
NAKAMURA TOME METHODS Slant SL-3B 2-axes CNC Turning Center
Max. swing over door 22.05” Max. swing over slide cover 27.17” Max. swing over bed 31.1” Max. swing over cross slide 18.9” Max. turning diameter 15.75” Max. turning length 21.26” Max. distance between spindle nose and turret face 30.31” Min. distance between spindle nose and turret face 7.48” Hole through Spindle 3.15” Spindle nose A1-8 Hole through draw tube 2.56” Round collet capacity 2.50” Spindle speed range 10 to 3500 RPM X-axis travel 10.83” Z-axis travel 22.83” X-axis rapid traverse rate 395 IPM Z-axis rapid traverse rate 590 IPM Tailstock quill center size No.3 M.T. Tailstock quill stroke 3.94” Tailstock quill diameter 3.54”
EQUIPPED WITH:
12” Dia. 3-jaw power chuck Tailstock with built-in live center 12-Station turret with large amount of holders Tool eye arm Automatic chip conveyor Work light Flood coolant system 25 H.P. Spindle drive Motor Fanuc 11T-A Control, Swivel pendant mount, Color CRT, RS232 port
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6644 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 6641 , Year = 1985 , Make = STAR , Model = JNC 10
Category:Swiss Type Automatic
Capacity: JNC 10 STAR CNC Swiss type Automatic Screw Machine w/ bar-feed
Ad #6641
Year:
1985
Make:
STAR
Model:
JNC 10
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
2,600lbs.
Dimension: L x W x H
79" x 42"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
JNC 10 STAR CNC Swiss type Automatic Screw Machine w/ bar-feed
Max. machining diameter 0.394” Stroke of headstock 2.95” 3 ranges spindle speeds 500-10,000 RPM No. of tools: 6 (3 on each opposed tool posts) shifting by .394” possible for 1 each Rapid traverse rate 394 IPM Max. cutting feed rate 236 IPM 3-Spindle end working attachment specs: Drilling capacity 0.24” Thread cutting capacity M6 x P1.0
EQUIPPED WITH:
Mechanical bar-feed 3-Spindle end working attachment Threading Twin 3-jaw work chucks Twin tool posts Parts separator .15 KW OM X-axis drive .15 KW OM Z-axis drive .4 KW hydraulic motor .18 KW coolant motor 1.5 KW Spindle drive 2T-A Fanuc control with RS232 port
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6641 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6618 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year -Make - JONES & LAMSON Model - 4512
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6617 , Year = , Make = JONES & LAMSON , Model = 4512
Category:Turning Center 4 - 10 in. chuck
Capacity: JONES & LAMSON MODEL 4512 COMBI CNC LATHE
Ad #6617
Year:
Make:
JONES & LAMSON
Model:
4512
Condition:
Needs Work
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
15,000 LBS.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Texas
Country:
USA
Price:
$sold USD
General Description
JONES & LAMSON MODEL 4512 COMBI CNC LATHE
MAXIMUM BAR SIZE: 4-1/2" MAXIMUM SWING: 22" SWING OVER CROSS SLIDE: 12-1/2" LONGITUDINAL TRAVEL (Z-AXIS): 18" CROSS TRAVEL (X-AXIS): 14" MAX. DISTANCE SPINDLE TO TURRET FACE: 31" TOOL POSITIONS: 12 TYPE OF TURRETS: END & SIDE SPINDLE NOSE: B-1-11" HOLE THRU SPINDLE: 5-1/4" SPINDLE SPEEDS: (VAR.) 20 TO 1200 RPM FEED RATES: (VAR.) .01 TO 300 IPM RAPID TRAVERSE RATE: 300 IPM MOTOR: 40 HP EQUIPPED WITH: FANUC OT CNC CONTROL COOLANT SPLASH/CHIP GUARDS NOTE - MACHINE REMANUFACTURED AND RETROFIT WITH FANUC OT CNC CONTROL IN 2002. no manuals needs work
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Power collet chuck 10-Station turret Automatic parts catcher M0-4.6 SMW Omnibar hydraulic bar-feed with (3) tubes, S/N 151 Tailstock Foot pedal for chuck control Flood coolant system Turret tool holders and tool blocks OT Fanuc control w/ RS232 port 20 H.P. Spindle drive
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6441 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6273 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1997 Make - EMCO Model - ET-425MC
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6150 , Year = 1997 , Make = EMCO , Model = ET-425MC
Category:CNC Lathe w/sub Spindle or Live Tooling
Capacity: CNC DUAL SPINDLE TURNING CENTER
Ad #6150
Year:
1997
Make:
EMCO
Model:
ET-425MC
Condition:
Very Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Ohio
Country:
USA
Price:
$Sold USD
General Description
With dual Turrets Live Tooling and Dual Sub-Spindles Siemens 810T CNC Control with Color CRT 6.3" Swing Over the Carriage (2) 5C Collet Chucks Live Tooling (2) Main Spindles (2) Sub-Spindles 5000 RPM Includes Dual Spindle Barfeeder!
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1994 Make - CINCINNATI MILACRON Model - 300MT/4-1000
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6049 , Year = 1994 , Make = CINCINNATI MILACRON , Model = 300MT/4-1000
Category:Turning Center 11 in. & over chuck
Capacity: CNC Turning Center with Twin Turrets and Live Tooling
Ad #6049
Year:
1994
Make:
CINCINNATI MILACRON
Model:
300MT/4-1000
Condition:
Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Ohio
Country:
USA
Price:
$Sold USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
CINCINNATI MILACRON 300MT/4-1000 CNC Turning Center with Twin Turrets and Live Tooling Acramatic 950 CNC Twin Turret Live Tooling 22" Swing 50HP 3500 RPM Chip Conveyor Programmable Tailstock with 40" Between Centers
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6049 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6050 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6047 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
16 Station magazine tool changer “C” axis Programmable tailstock Tool eye 8” Dia. Howa hydraulic 3-jaw power chuck with set of soft jaws and remote foot pedal (5) block type holders (5) round type holders (6) live tools (1) live right angle tool Misc. cutters Flood coolant 15 H.P. Main drive motor Mazatrol CAM T-3-B CNC control with color CRT and graphics
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 5905 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 7367 , Year = 1996 , Make = Citizen , Model = E16J
Category:Swiss Type Automatic
Capacity: 1996 Citizen E16J CNC Turning Center
Ad #7367
Year:
1996
Make:
Citizen
Model:
E16J
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
2,200 LBS
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
5/8 Capacity Mitz Control 6.3 Machine Length 10,000 RPM Main 8,000 RPM Sub 5,000 RPM Live Tool (2) 12 Station Turret c Axis Chip Conveyor Bar Feed
Full Machine Specifications
MAXIMUM MACHINING DIAMETER 16MM (5/8") MAXIMUM MACHINING LENGTH 160MM (6.3") MAIN SPINDLE THROUGH HOLE 20MM (.79") MAIN SPINDLE SPEEDS 220 - 10,000 RPM MAXIMUM SUB SPINDLE SPEED 8,000 RPM MAXIMUM LIVE TOOL SPEED 5,000 RPM MAXIMUM DRILLING DIAMETER 4MM (.157") MAXIMUM THREDING DIAMETER M3 (.118") RAPID SPEEDS (X1 & X2 AXES) 12 M/MIN (472"/MIN) RAPID SPEEDS (Z1 & Z3 AXES) 16 M/MIN (630"/MIN) RAPID SPEEDS (C AXIS) 100 RPM MAX. CHUCKING DIA. OF PICK-OFF SPINDLE 16MM (5/8") MAXIMUM BACKWORK LENGTH 140MM (5.51") PICK-OFF SPINDLE SPEED 200-5000 RPM NUMBER OF TURRETINDEXES 10 PER TURRET SYNCHRONOUS ROTARTY GUIDE BUSHING UNIT E216J U22OZ/U212OZ C AXIS CONTROL UNIT E2U21B COOLANT UNIT PUMP TYPE 400W (0.54HP) COOLANT UNIT CARTRIDGE TYPE TANK 140 LITRES (37 GAL)
EQUIPPED WITH MITSUBISHI CNC CONTROL (2) 12-STATION TURRETS (ALL LIVE) C AXIS ON MAIN SPIDNLE SUB-SPINDLE WITH 5 DEGREE INDEX SPEGO TURNANIC 123 BAR FEED WITH Z-SORBS LIFT UP CHIP CONVEYOR TOOL HOLDERS STANDARD COOLANT SYSTEM MIST COLLECTOR (AIR PUMP FOR BAR FEED ALL AVAILABLE MANUALS AND SCHEMATICS 12 MONTH EXTENEDED WARRANTY INCLUDED IN
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Swing Over Bed 24.4" 24.4" Between Centers 43.3" Chuck Size 10" Max Machining Diameter 14" Spindle Nose A2-8 Hole Thru Spindle 3.03" Spindle Center Height From Floor 45.3" Spindle Speed 3000 RPM Tailstock Taper MT-4 Turret Stations 12 Spindle Motor 40 HP
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7361 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1998 Make - Mori Seiki Model - DL-151Y
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7354 , Year = 1998 , Make = Mori Seiki , Model = DL-151Y
Category:CNC Lathe w/sub Spindle or Live Tooling
Capacity: 1998 Mori Seiki DL-151Y CNC Turning Center with Twin Spindle & Turrets
Ad #7354
Year:
1998
Make:
Mori Seiki
Model:
DL-151Y
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
16,720 lbs
Dimension: L x W x H
126.6" x 97.8" x 79.9"
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
MSC 501 Cntl 16.5' Swing 40.2" Btwn Spindle Noses 7.8" Turn Dia. 7.8’ Turn Length 1.7" Bar Cap Dual Spindles 5,000 RPM 10 HP 12 Tools Per Turret 3,000 Rot. Tool 3.8HP 6" Chuck Both Sides Built In Tool Pre Setter (8) Live Tools 30 Misc. ID & OD Holders Combined Included
Full Machine Specifications
Control MSC-501 Swing Over Bed No.1, 2 16.5" Max Distance BTWN Spindle Noses 40.2" Max Turning Diameter No. 1, 2 7.8" Standard Turning Diameter No. 1,2 5.9" Max Turning Length No. 1, 2 7.8" Bar Capacity 1.7" Travels: X-Axis No.1, 2 9.3/8.5+/- 0.8" Y-Axis 3.1 +/- 1.6" Z-Axis 9.8" 2nd Head Stock 30.9" Number of Spindles 2 Spindle Speed Range No. 1, 2 50-5,000 RPM Spindle Nose No. 1, 2 JIS A2-5 Thru Hole Diameter 2.2" Number of Turrets 2 Tools Per Turret 12 (All Rotary) Rotary Tool Speed 30-3,000 RPM Spindle Drive Motor #1/ #2 7.5HP/ 10 HP Rot Tool Spindle HP 3.8 HP
Equipepd With: 6" Chuck Left & Right Side Built In Tool Presetter Chip Conveyor (8) Live Tools Approx (14) I.D. Tool Holders Approx (16) O.D. Tool Holders
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7343 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 2004 Make - Hardinge Model - Quest 8/51 Hydroglide
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7342 , Year = 2004 , Make = Hardinge , Model = Quest 8/51 Hydroglide
Category:Turning Center 4 - 10 in. chuck
Capacity: 2004 Hardinge Quest 8/51 Hydroglide CNC Turning Center
Ad #7342
Year:
2004
Make:
Hardinge
Model:
Quest 8/51 Hydroglide
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
12,300 lbs
Dimension: L x W x H
108.6" x 76.5" x 75"
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
Fanuc 21iT 20HP 8,000 RPM 24” Centers 2.378” Bar capacity Tailstock 12 Station Turret Tool Probe Thread Cutting Cycle Retract Continual Thread Cutting PC Front End Machine Foot Switch
Full Machine Specifications
Hydroglide Model- Hydrostatic Linear Guideways Optional High Speed Wraparound Drive System (8,000 Fanuc 21iT Control 12 Station Top Plate Tailstock Automatic Tool Touch Probe Collet Closer Footswitch (Main) Thread Cutting Cycle Retract Continual Thread Cutting PC Front End Machine Travels (Max) X axis 7.45” Z axis with Collect 24” Z axis with 8” Chuck 20.5” Spindle Through Hole 2.378” Turning Dia Max 12.151” Swing Dia over Way Cover 20.44” 20 HP 80-8,000 RPM
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 2002 Make - Gildemeister Model - CTX-400-S2
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7331 , Year = 2002 , Make = Gildemeister , Model = CTX-400-S2
Category:CNC Lathe w/sub Spindle or Live Tooling
Capacity: 2002 Gildemeister CTX-400-S2 CNC Turning Center with Live Tooling
Ad #7331
Year:
2002
Make:
Gildemeister
Model:
CTX-400-S2
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
14,000 Lbs
Dimension: L x W x H
208" x 96" x 95"
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
Fanuc 21iT 22.4" Swing 16.5" Swing Over Crosslide 25" Centers 12 Tools 5,000 RPM 37.5 HP Live Tooling Full Contouring C-Axis RS -232 Port 8" or 10" 3 Jaw Power Chuck Prog Tailstock Chip Conveyor Tooling Package!!
Full Machine Specifications
LATHES, 3-AXIS CNC, UNIVERSAL W/ LIVE TOOLING Fanuc 21i Max Swing Over Slant Bed 22.4" Max Swing Over Crosslide 16.5" Distance Between Centers 25" Travels:X-Axis 8.7" Z-Axis 25" Rapid Travers:X / Z-Axis 787 / 945 IPM Tool Positions 12 Total Spindle Bore 3.1" Bar Capacity 2.56" Spindle Speed Range 25-5,000 RPM Spindle Horse Power 37.5 HP Equipped With:Fanuc 21i Control RS-232 Port Tool Tip Graphics 8" or 10" 3-Jaw Power Chuck (5k RPM Only with 8") Live Tooling Milling Drilling Turret Option Full Contouring C-Axis Chip Conveyor Programmable Tailstock
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
General Precision Model Belted Drive System Fanuc 21iT Control 12 Station Top Plate Tool Touch Probe Tailstock Travels (Max) X axis 7.45” Z axis with Collect 15” Z axis with 6” Chuck 10.65” Spindle Through Hole 1.89” Turning Dia Max 12.151” Swing Dia over Way Cover 20.44” 15 HP 60-6,000 RPM
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7332 , Year = 1999 , Make = Haas , Model = SL-20
Category:CNC Lathe w/sub Spindle or Live Tooling
Capacity: 1999 Haas SL-20 CNC Turning Center with Live Tooling
Ad #7332
Year:
1999
Make:
Haas
Model:
SL-20
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Michigan
Country:
USA
Price:
$SOLD USD
General Description
8" Kitagawa Chuck 20 HP 2.062" spindle bore High Speed 5C ATC Collet Chuck Hyd Draw Tube Floppy Tool Pre Setter Live Tooling P. Catcher Quick Code Chip Auger
Full Machine Specifications
Heavy Duty Servo Bar 300 Bar Feeder Part Program Storage and Edit 8" Kitagawa Chuck # B-208 20 HP Vector Dual Drive High Speed Machining 5C ATS Collet Chuck Hydraulic Draw Tube Hydraulic Tailstock Instruction Manual Floppy Disk Drive Advanced Editor Tool Pre Setter Live Tooling Sensor Light Parts Catcher Quick Code Chip Auger Alarms
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
MAZATROL T-Plus CNC Controls Main and Sub Spindle Maximum Swing 20.9" Max Turning Diameter 11.8" Between Centers 212.9" Main Spindle Motor 25 HP Full "C" Axis Spindle Speed 35-5000 RPM ATS B-60 Collet Chuck 3 Jaw Chuck Sub Spindle Motor 10 HP Sub Spindle Speed 180-3000 RPM 6" 3 Jaw Chick Single Tool Turret with 12-Tool Positions 5 HP Rotary Tools 120-3000 rpm Rotary Tool Speeds 1180 IPM Rapid Transverse Rate Accessories Tool Eye Auto Chuck Open/ Closure Rigid Taping Cycle Chip Conveyor Automatic Parts Catcher Bar Feed Interface Rotary & Turning Tools as Available
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1988 Make - Cincinnati Model - Cinturn 10U40
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7326 , Year = 1988 , Make = Cincinnati , Model = Cinturn 10U40
Category:CNC Lathe w/sub Spindle or Live Tooling
Capacity: 1988 Cincinnati Cinturn 10U40
Ad #7326
Year:
1988
Make:
Cincinnati
Model:
Cinturn 10U40
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
Acramatic 850TC Control C Axis Live Tool VDI50 12 Station Turret 30 HP 2.5" Bar 44" Centers 15" Swing 3500 RPM
Full Machine Specifications Series 1210 Swing 18" Center Distance 44" Travels X 5.2" Travels Z 10" RPM 32-3500 Spindle Bar 2.3" 30 HP 12 Position Turret 10" Chuck C Axis 1 deg VDI 50 Live Tooling Manuals 5 OD Holders 2 ID Holders 2 Live Holders 800 Cutting Hours Tailstock Max Length 44" Has Optional 30 HP Spindle Motor
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7207 , Year = 1974 , Make = MONARCH , Model = 25NC
Category:Turning Center 11 in. & over chuck
Capacity: 30” x 168”cc MONARCH Pathfinder N.C. Straight Bed Lathe, Model 25NC
Ad #7207
Year:
1974
Make:
MONARCH
Model:
25NC
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
32,500 lbs
Dimension: L x W x H
427" x 164"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item
General Description
30” x 168”cc MONARCH Pathfinder N.C. Straight Bed Lathe, Model 25NC
Max. Swing over bed 31” Max. Swing over cross-slide 20” Hole through spindle 3 1/16” Center size No.6 M.T. Spindle nose D-1-8-Camlock Bed width 22” Tailstock spindle diameter 5 ¾” Tailstock Spindle travel 10” 4 Ranges spindle speeds (Infinity variable) 10-1250 RPM Minimum programmable increment .0001” Longitudinal threading rates up to 150 IPM Traverse rates up to 275 IPM
EQUIPPED WITH:
Flame hardened bed ways Interchangeable square tool post and hexagon tool post Tailstock Automatic chip conveyor 12” Dia. capacity roller steady rest Built-in live tailstock center 20” Dia. 3-jaw power chuck w/ extra jaws Pan bed and Coolant system with sliding splash guard Automatic coolant supply to each tool Heavy duty cross bridge on hardened dovetail with ball screw drive Carriage driven by preloaded rack and pinion with precision feed back and hydraulic Servo Motor
40 H.P. DC Main Drive Motor G.E. Mark Century 7500 N.C. Controller
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7207 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
We found 54 matching ads. Now displaying the remaining 54 ads.
FOR SALE: Year - 1970 Make - MONARCH Model - 2516X96
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6695 , Year = 1970 , Make = MONARCH , Model = 2516X96
Category:Heavy Duty Large Lathe 24in. & over swing
Capacity: 27” x 96”cc MONARCH Series 80 Dyna-Shift H Duty Engine Lathe, 2516X96
Ad #6695
Year:
1970
Make:
MONARCH
Model:
2516X96
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
22,250 lbs.
Dimension: L x W x H
228" x 72" x 66.5"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item
General Description
27” x 96”cc MONARCH Series 80 Dyna-Shift Heavy Duty Engine Lathe, Model 2516X96
Max. swing over bed ways 27” Max. swing over cross slide 16 ¼” Hole through spindle 3 1/16” Tailstock quill dia. 5 ¾” Center size No.6M.T. Spindle nose 8” D-1 Camlock Bed width 22” Compound rest top slide travel 6” 36 Spindle speeds 10-1250 RPM 48 feeds .003-.168 IPR Thread range ½ to 28 T.P.I. Rapid traverse rate 200 IPM Taper turning capacity 6 ½” taper/ft x 24”L
EQUIPPED WITH:
Induction hardened bed ways Swivel compound Thread dial Dyna-Shift headstock Shifting D1-8” Camlock Spindle Taper turning attachment 4-way power rapid traverse 18”Dia. 3-jaw universal chuck Swing chuck guard 2-speed tailstock 16” Dia. cap. Roller steady rest Live center Plain toolpost Pan bed and coolant 30 H.P. 3/60/220-440 Volt Motor and control
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6695 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1960 Make - MONARCH Model - 2516X72
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6694 , Year = 1960 , Make = MONARCH , Model = 2516X72
Category:Heavy Duty Large Lathe 24in. & over swing
Capacity: 27”x72”cc MONARCH Series 80 Dyna-Shift H Duty Engine Lathe, 2516X72
Ad #6694
Year:
1960
Make:
MONARCH
Model:
2516X72
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
18,000 lbs.
Dimension: L x W x H
201" x 78" x 60"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item
General Description
27”x72”cc MONARCH Series 80 Dyna-Shift Heavy Duty Engine Lathe, Model 2516X72
Max. swing over bed ways 27” Max. swing over cross slide 16 ¼ ” Hole through spindle 3 1/16” Center size No.6M.T. Tailstock quill dia. 5 ¾” Spindle nose 8” D-1 Camlock Bed width 22” Compound rest top slide travel 6” 36 Spindle speeds 10-1250 RPM 48 feeds .003-.168 IPR Thread range ½ to 28 T.P.I. Rapid traverse rate 200 IPM Taper turning capacity 6 ½”taper/ft x 24”L
EQUIPPED WITH:
Induction hardened bed ways Swivel compound Thread dial Dyna-Shift headstock Shifting D1-8” Camlock Spindle Taper turning attachment 4-way power rapid traverse 15”Dia. 3-jaw air chuck with cylinder and controls Swing chuck guard 2-speed tailstock 12”Dia. cap. Roller steady rest 4-way toolpost Pipe center Pan bed and coolant 30 H.P. 3/60/220-440 Volt Motor and control
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6694 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year -Make - BULLARD Model - CUTMASTER 036
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6181 , Year = , Make = BULLARD , Model = CUTMASTER 036
Category:Vertical Turret Lathe (VTL)
Capacity: 36" VERTICAL TURRET LATHE
Ad #6181
Year:
Make:
BULLARD
Model:
CUTMASTER 036
Condition:
Very Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
23,000
Dimension: L x W x H
87" x 128" x 112" H
Machine Location:
City:
On Request
State:
Ohio
Country:
USA
Price:
$SOLD USD
Buyers Premium: A 7 % Buyers Premium applies to the final sale price of this item
General Description
36" VERTICAL TURRET LATHE
DIAMETER OF 4 JAW TABLE ....... 36" TABLE SPEEDS .................. (20) 4.93 - 180 RPM FEEDS ......................... (16) .0026 TO .500 IPR VERTICAL TURRET TRAVEL ........ 26" FACE OF TURRET TO TABLE ....... 41-1/4" MAXIMUM SWING, SIDE HEAD UP ........... 39" SWING, SIDE HEAD DOWN ......... 45" DIAMETER SWIVELING TURRET HEAD ......... YES 5-POSITION TURRET ON RAIL ..... YES 4-WAY TOOL POST ON SIDEHEAD ... YES PENDANT CONTROL ............... YES MOTOR ......................... 30 HORSEPOWER
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: 30 day satisfaction guarantee, buyer pays freight , buyer inspection encouraged.
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6181 when Inquiring
Asking Price: $SOLD
Buyers Premium:A 7 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 6183 , Year = , Make = SCHEISS , Model = 040
Category:Vertical Turret Lathe (VTL)
Capacity: 40" VERTICAL TURRET LATHE
Ad #6183
Year:
Make:
SCHEISS
Model:
040
Condition:
Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Ohio
Country:
USA
Price:
$Sold USD
General Description
DIAMETER OF 4-JAW TABLE ............. 39-1/2" SWING WITH SIDE HEAD IN PLACE ....... 42" SWING WITHOUT SIDE HEAD ............. 50" SPINDLE SPEEDS ...................... (16) 6.2 TO 310 RPM MAXIMUM UNDER RAIL .................. 46" HORIZONTAL TRAVEL OF TURRET HEAD .... 28" VERTICAL TRAVEL OF TURRET HEAD ...... 27" HORIZONTAL TRAVEL OF SIDE HEAD ...... 24" VERTICAL TRAVEL OF SIDE HEAD ........ 28" FEEDS............................... (12) .002 TO .259 IPR EQUIPPED WITH: 5 POSITION TURRET HEAD ON RAIL SIDE HEAD PENDANT CONTROL 30 HORSEPOWER MAIN MOTOR
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 6184 , Year = , Make = KING , Model = 042
Category:Vertical Turret Lathe (VTL)
Capacity: 42" VERTICAL TURRET LATHE
Ad #6184
Year:
Make:
KING
Model:
042
Condition:
Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Ohio
Country:
USA
Price:
$sold USD
General Description
DIAMETER .............................. 42" SWING ................................. 46" TABLE SPEED ........................... 4.1 TO 125 RPM TRAVEL OF THE RAM ....................26" VERTICAL SADDLE TRAVEL ON RAIL ................37" RIGHT TO LEFT HEIGHT UNDER RAIL ..................... 39" (RAM HIGHEST POSITION) SIDE HEAD WITH 4 WAY TOOL POST ........ 1-1/4" SQUARE TOOL HORIZONTAL TRAVEL ..................... 22" VERTICAL TRAVEL ....................... 31" FEED RATES FOR THE HEADS .............. 12 CHANGES ............................... 1/96" TO 1/2" RAPID TRAVERSE ........................ YES TURRET RAIL HEAD AND SIDE HEAD ........ YES 4 JAW CHUCK ........................... YES MOTOR ................................. 20 HORSEPOWER
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Max.swing without guards 70” Max.swing with guards 60” Hole through spindle 11 ½” Max.distance, faceplate to tool slide face 14” 24 Spindle speeds 6-338 RPM 55 Feeds .001-.064 IPR Carriage rapid traverse rate 120 IPM
EQUIPPED WITH
(2) Carriages, each with swivel compounds 11 ½” Diameter spindle bore 60” Diameter T-slotted faceplate (2) Aloris tool posts with tool block Power rapid traverse to carriages Hardened, replaceable carriage way Splash guards Coolant pump & pan Individual feed/rapid motor 20 H.P 3/60/230-460 Volt motor with controls Wired for 3/60/220 Volt operation
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 5967 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1973 Make - HARDINGE Model - DSM-59
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 5963 , Year = 1973 , Make = HARDINGE , Model = DSM-59
Category:Second Operation
Capacity: HARDINGE Precision Second Operation Lathe, Model DSM-59
Ad #5963
Year:
1973
Make:
HARDINGE
Model:
DSM-59
Condition:
Excellent
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
1,100 lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
HARDINGE Precision Second Operation Lathe, Model DSM-59
Spindle capacity with round 5C collets 1-1/16" hexagon 5C collets 7/8" square 5C collets 3/4" step chucks 1-1/16" to 6" jaw chucks 5" jaw chucks through spindle 1-5/32" Spindle nose 2-3/16" R.H. Length of bed 36" Swing over bed 9" Travel of double tool cross slide 3 3/4" Travel of turret slide 4" Diameter of turret holes 5/8" Variable spindle speeds range 230 to 3,500 RPM
EQUIPPED WITH:
Hexagon turret Double tool cross slide with (3) toolblocks Push button control for variable speed Ball bearing lever collet closer (2) Round type 5C collets (1) Dead center (4) Drill chucks Work light Self-contained coolant system 3/4 - 3/8 H.P. 3/60/220 volt 2-speed main drive motor and electrical controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 5963 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 5964 , Year = 1963 , Make = HARDINGE , Model = HC
Category:Second Operation
Capacity: Model HC HARDINGE Precision Chucker
Ad #5964
Year:
1963
Make:
HARDINGE
Model:
HC
Condition:
Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
1,500 lbs.
Dimension: L x W x H
64" x 30 3/4" x 57 1/2"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
Model HC HARDINGE Precision Chucker
Spindle capacity: with step chucks 1" to 6" with jaw chucks 5" with jaw chucks through spindle 1 5/32" with Round 5C collets 1" with Hex 5C collets 7/8" with square 5C collets 3/4" Spindle nose diameter 2.189" Spindle nose thread 2 3/16"-10 R.H. Maximum fixture diameter 9" Maximum distance from face of turret to spindle 13" Power feeds 1/4 to 10 IPM Spindle speeds 130 to 3000 RPM
EQUIPPED WITH:
Threaded nose Hardened and ground bedways 8-station turret Steel cabinet Coolant 1.5 H.P. 3/60/220 volt electrics
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 5964 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 5943 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 5936 , Year = , Make = SOUTHBEND , Model = 444Z
Category:Tool Room Lathe 8in. to 14in. swing
Capacity: 9" x 22"cc SOUTHBEND model A bench lathe with table
Ad #5936
Year:
Make:
SOUTHBEND
Model:
444Z
Condition:
Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
500 lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
9" x 22"cc SOUTHBEND model A bench lathe with table, bed length 3 1/2'
Collet capacity 1/2" Max. swing over bed 9 1/4" Max. swing over cross slide 5 1/2" Hole through spindle 3/4" Cross slide travel 5 7/8" Compound rest top slide travel 2 1/4" Tailstock spindle taper No. 2 M.T. Tailstock spindle travel 2 1/8" 6 Spindle speeds 41-658 RPM Longitudinal feeds .0015-.0853 IPR Cross feeds .0004-.0252 IPR Thread range 4-224 T.P.I.
EQUIPPED WITH:
Steel table mount Swivel compound Power longitudinal and cross feeds Threading with thread dial 5” dia. 3-jaw universal chuck 3-point plain steady rest Plain toolpost (3) drill chucks Live center ½ H.P. 3/60/220-440 volt motor with reversing control Wired for 3/60/440 volt operation
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 5936 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 5935 , Year = , Make = SOUTHBEND , Model = 444Z
Category:Tool Room Lathe 8in. to 14in. swing
Capacity: 9" x 22"cc SOUTHBEND Model A Bench lathe with table
Ad #5935
Year:
Make:
SOUTHBEND
Model:
444Z
Condition:
Serial #:
On Request
Machine Status:
Shipping Info:
We can load
Weight:
500 lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
9" x 22" cc SOUTHBEND Model A Bench lathe with table, Bed length 3 1/2'
Collet capacity 1/2" Max. swing over bed 9 1/4" Max. swing over cross slide 5 1/2" Hole through spindle 3/4" Cross slide travel 5 7/8" Compound rest top slide travel 2 1/4" Tailstock spindle taper No. 2 M.T. Tailstock spindle travel 2 1/8" 6 Spindle speeds 41-658 RPM Longitudinal feeds .0015-.0853 IPR Cross feeds .0004-.0252 IPR Thread range 4-224 T.P.I.
EQUIPPED WITH:
Steel table mount Swivel compound Power longitudinal and cross feeds Threading with thread dial 5" dia. 3-jaw universal chuck with (2) sets of jaws 3-point plain steady rest Plain toolpost Drill chuck Live center Dead center Carriage stop 1 H.P. 3/60/220-440 volt motor with reversing control Wired for 3/60/440 volt operation
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 5935 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 5933 , Year = 1966 , Make = IKEGAI , Model = DA-25
Category:Heavy Duty Large Lathe 24in. & over swing
Capacity: 24”/32” x 120”cc IKEGAI Removable Gap Bed Lathe
Ad #5933
Year:
1966
Make:
IKEGAI
Model:
DA-25
Condition:
Very Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
12,500 lbs.
Dimension: L x W x H
189" x 56" x 61 1/2"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
24”/32” x 120”cc IKEGAI Removable Gap Bed Lathe
Maximum swing over bed ways 24.4” Maximum swing over cross slide 15.35” Maximum swing through gap 32” Maximum length of gap from front of chuck 9” Spindle bore 2.17” Spindle nose type A Bed width 16-15/16” Tailstock spindle diameter 2-15/16” Tailstock spindle taper No. 5 M.T. 20 Spindle speeds 25-2000 RPM 44 Longitudinal feeds 0.00136-0.0937 IPR 44 Cross feeds 0.00044-0.0315 IPR Thread range: Inch 2-28 T.P.I. Metric 1 to 224 mm. Module 0.25-56
EQUIPPED WITH:
Removable gap bed Induction hardened bed ways Swivel compound Hydraulic tracer attachment (less power unit) 2-speed drilling type tailstock Extra fine feed arrangement 15” diameter 3-jaw universal chuck Thread dial Carriage stop Quick-change tool post with toolblock and tool Work light 3-point plain follow rest 3-point 7 ½” diameter capacity steady rest 3-point 6” diameter capacity steady rest Motor amp meter (2) slide out chip pans with coolant pump 15 H.P. 3/60/220-440 volt motor with controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 5933 when Inquiring
Asking Price: $sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 5947 , Year = 1955 , Make = MONARCH , Model = 20M
Category:General Purpose Lathe 15in. to 23in. swing
Capacity: 20” x 144”cc MONARCH heavy duty engine lathe
Ad #5947
Year:
1955
Make:
MONARCH
Model:
20M
Condition:
Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
12,500 lbs.
Dimension: L x W x H
251" x 77"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
20” x 144”cc MONARCH heavy duty engine lathe, Mdl. 20M
Max. swing over bed ways 22 ½” Max. swing over cross-slide 13” Hole thru spindle 2-3/16” Spindle nose 8”-D-1 Camlock Size of centers No. 5 M.T. Compound rest top slide travel 6” Bed width 21 ¾” Tailstock spindle diameter 4” Tailstock spindle travel 6 ¾” 16 Spindle speeds 11 to 500 RPM 48 Feeds .0038 to .240 IPR Thread range ¾ to 46 T.P.I.
EQUIPPED WITH:
Flame hardened bed ways Full threading Thread dial Swivel compound 15” dia. 3-jaw universal chuck 12” bed extension for tailstock increasing center distance to 156” Square toolpost Live center (2) Pipe centers Power rapid traverse to carriage Roller type steady rest Pan & bed and coolant 25 H.P. 3/60/230-460 volt motor with controls Wired for 3/60/440 volt operation
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 5947 when Inquiring
Asking Price: $sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 5946 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 5949 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1957 Make - WARNER & SWASEY Model - M-3500
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 5958 , Year = 1957 , Make = WARNER & SWASEY , Model = M-3500
Category:Ram Type & Saddle Type Turret Lathes
Capacity: #3A WARNER & SWASEY Square Head Saddle Type Turret Lathe, Model M-3500
Ad #5958
Year:
1957
Make:
WARNER & SWASEY
Model:
M-3500
Condition:
Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
16,750 lbs.
Dimension: L x W x H
16' 1" x 83 7/8"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$SOLD USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
#3A WARNER & SWASEY Square Head Saddle Type Turret Lathe, Model M-3500
Maximum swing over carriage guard: 23-1/2" Maximum swing over bed: 24-1/2" Maximum swing over carriage horn: 18" Bar capacity - Round: 4-1/2" Square: 3-3/16" Hexagon: 3-7/8" Spindle nose: A-11" Cross slide specs: Cross travel - 14-3/8" 16-Cross feeds - .0025 to .082 IPR Longitudinal travel - 51" 16-Longitudinal feeds - .005 to .167 IPR Hexagon turret specs: Longitudinal travel - 51" 16-Longitudinal feeds - .005 to .167 IPR Diameter of holes - 5" Maximum distance, spindle to turret face - 59" Length turned: 43" 16-Spindle speeds: 12 to 426 RPM
EQUIPPED WITH:
Square, pre-selector headstock Hardened ways Square toolpost Rapid traverse to side carriage Telescopic way covers Overhead pilot bar 21" Dia. 3-jaw universal chuck Chuck guard (2) 2-Hole vertical slide tools (1) Multiple boring head with pilot hole (2) Long flange type toolholders (1) Short flange type toolholder (3) Boring tools Pan bed with splash guard 30 H.P. 3/60/220-440 volt motor with controls Machine wired for 3/60/440 volt operation
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 5958 when Inquiring
Asking Price: $SOLD
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 5941 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 5950 when Inquiring
Asking Price: $sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1965 Make - SOUTHBEND Model - Catalogue #CL187RB
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 5937 , Year = 1965 , Make = SOUTHBEND , Model = Catalogue #CL187RB
Category:Tool Room Lathe 8in. to 14in. swing
Capacity: 10" x 34"cc SOUTHBEND Engine Lathe with metal cabinet base
Ad #5937
Year:
1965
Make:
SOUTHBEND
Model:
Catalogue #CL187RB
Condition:
Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
1000 lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$SOLD USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
10" x 34"cc SOUTHBEND Engine Lathe with metal cabinet base, catalogue #CL187RB
(less apron, machine incomplete)
Swing over bed and saddle wings 10 1/2" Swing over cross slide 5 7/8" Bed length 4 1/2' Distance between centers 34" Capacity through spindle 1 3/8" Max. collet capacity 1-1/16" Camlock spindle nose 4” type D-1 Center size No. 2 M.T. Tailstock spindle travel 2 1/8" (6) Spindle speeds 105-1400 RPM (70) Longitudinal feeds .0007-.0836 IPR (70) Cross feeds .0003-.0303 IPR Thread range 4 to 480 T.P.I.
EQUIPPED WITH:
Swivel compound D1-4" Camlock spindle nose Gearbox with threading Thread dial (2) 4" dia. 4-jaw chucks Tailstock 3-point plain steady rest Turret drum production carriage stop Deep hole drilling attachment Work light (2) Drill chucks (2) M.T. adapters Metal cabinet base with chip pan 1 H.P. 3/60/200-220-440 volt 1730 RPM drive motor with controls Wired for 3/60/220 volt operations
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 5937 when Inquiring
Asking Price: $SOLD
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1957 Make - BARDONS & OLIVER Model - No.4
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 5956 , Year = 1957 , Make = BARDONS & OLIVER , Model = No.4
Category:Ram Type & Saddle Type Turret Lathes
Capacity: No. 4 BARDONS & OLIVER Ram type turret Lathe
Ad #5956
Year:
1957
Make:
BARDONS & OLIVER
Model:
No.4
Condition:
Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
4,750 lbs.
Dimension: L x W x H
107" x 47"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
No. 4 BARDONS & OLIVER Ram type turret Lathe
Bar capacity 4” Hole thru spindle 4 ¼” Max. swing over bed 18 1/8” Max. swing over carriage guides 16 ½” Max. swing over cross slide 9 ½” Max. distance end of spindle to face of turret 32 ½” Width across bed ways 9” Hexagon turret travel 12” Cross slide cross travel 9 ½” Cross slide carriage longitudinal travel 26” 16 Spindle speeds 31-1550 RPM 12 longitudinal feeds .0025-.050 IPR 12 hexagon turret feeds .0025-.050 IPR 12 cross feeds .0015-.030 IPR
EQUIPPED WITH:
Preselector headstock Hardened bed ways Hexagon turret Front square tool holder Rear tool holders Large quantity of collet pads, turret tooling, boring bars Power operated collet chuck 12” Dia. 4-jaw chuck Pan bed and coolant 10 H.P. 3/60/220-440 Volt Motor w/ controls 3/60/440 Volt operation
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 5956 when Inquiring
Asking Price: $sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1956 Make - NEBEL Model - SERIES LA
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 5945 , Year = 1956 , Make = NEBEL , Model = SERIES LA
Category:General Purpose Lathe 15in. to 23in. swing
Capacity: 18” x 48”cc NEBEL Engine Lathe
Ad #5945
Year:
1956
Make:
NEBEL
Model:
SERIES LA
Condition:
Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
4,400 lbs.
Dimension: L x W x H
116" x 52" x 55"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
18” x 48”cc NEBEL Engine Lathe, Series LA
Maximum swing over bed: 19” Maximum swing over cross slide: 11” Spindle bore: 1 ¾” Spindle nose: L-1 tapered key Bed width: 15 ½” Tailstock spindle diameter: 3” Tailstock spindle traverse: 8 ½” Size of centers: No. 4 M.T. Compound rest travel: 6” 12 spindle speeds: 24-750 RPM 36 feeds: .005-.048 IPR Thread range: 4-40 T.P.I.
Equipped with:
Hardened bed ways 15” diameter 4-jaw chuck 18” faceplate 10” drive plate Collet chuck 6” capacity 3-point plain steady rest Square toolpost Swivel compound Micrometer carriage stop Thread dial Pan and coolant 7 ½ H.P. 2/60/220 volt motor and controls with phase changer for 3/60/240 volt input
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 5945 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1956 Make - SOUTHBEND Model - Catalogue #CL8-185D
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 5955 , Year = 1956 , Make = SOUTHBEND , Model = Catalogue #CL8-185D
Category:Tool Room Lathe 8in. to 14in. swing
Capacity: 14 ½” x 48”cc SOUTHBEND Toolroom Lathe, Catalogue #CL8-185D
Ad #5955
Year:
1956
Make:
SOUTHBEND
Model:
Catalogue #CL8-185D
Condition:
Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
2200 lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
14 ½” x 48”cc SOUTHBEND Toolroom Lathe, Catalogue #CL8-185D
Max. swing over bed 14 5/8” Max. swing over cross slide 8 15/16” Capacity thru spindle 1 3/8” Max. collet capacity 1 1/16” Spindle nose D1-4” Camlock Center size No.3 M.T. Spindle speeds to 875 RPM 48 longitudinal feeds .0015-.0841 IPR 48 cross feeds .0006-.0315 IPR Thread range 4-224 T.P.I.
EQUIPPED WITH:
Swivel compound 4-step cone pulley belt drive headstock D1-4” Camlock Spindle nose Hand collet tube with nose and (10) 5C collets w/ rack 8” Dia. 3-jaw universal chuck 3 point plain steady rest Aloris tool post with (3) tool blocks Drill chuck Live center Misc. tooling 2 H.P. AC Motor drive w/ controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 5955 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1971 Make - GISHOLT Model - No.5-3
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 5957 , Year = 1971 , Make = GISHOLT , Model = No.5-3
Category:Ram Type & Saddle Type Turret Lathes
Capacity: No.5-3 GISHOLT Masterline Ram type turret lathe with SCR drive
Ad #5957
Year:
1971
Make:
GISHOLT
Model:
No.5-3
Condition:
Very Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
11,600 lbs
Dimension: L x W x H
156 1/4" x 84"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
No.5-3 GISHOLT Masterline Ram type turret lathe with SCR drive
Swing over bed ways 21 ¾” Swing over carriage wings 18 ¾” Swing over cross slide 12 1/8” Bar capacity 3” Bed width 12” Spindle nose A1-8” Cross slide travel 11 ¾” Longitudinal travel of cross slide 25 ¾” (8)Power longitudinal & cross feeds .003-.031 IPR Hexagon turret turning length 15.62” Max. distance spindle to turret face 37” 8 power longitudinal feeds of turret .003-.031 IPR 24 Spindle speeds 30-1500 RPM
EQUIPPED WITH:
Hardened bed ways Curvic couplings on both hexagon & square turrets Leader type threading with (5) leaders Square front turret tool post Hexagon turret Mimik hydraulic tracer attachment mounted on rear slide Pneumatic collet chuck with approx. (50) sets of collets 8 ¼” dia. 3-jaw universal chuck Swing type pendant control Power assisted turret indexing Dual feeds on cross slide (5)short flange type tool holders (1)long flange type tool holders (1)live center (1) drill chuck Pan bed and coolant Variable speed drive with up-dated Square D-Altvar S.S. controls, pendant control mount 3/60/440 volt control voltage
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 5957 when Inquiring
Asking Price: $sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 5944 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
L-o back plate Hand collet closer with nose (for 5C collets) 2-point plain follow rest Drill chuck with adapter Dead center Headstock sleeve adapter with dead center Boring bar Steel cabinet base Chip pan with splash guards 3/1 ½ H.P. 2-speed, 3/60/220 volt motor with controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 5938 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1961 Make - LEBLOND REGAL Model -
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 5940 , Year = 1961 , Make = LEBLOND REGAL , Model =
Category:Tool Room Lathe 8in. to 14in. swing
Capacity: 13” x 42”cc LEBLOND REGAL Engine Lathe
Ad #5940
Year:
1961
Make:
LEBLOND REGAL
Model:
Condition:
Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
2,650 lbs.
Dimension: L x W x H
89 3/4" x 34 3/16"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
13” x 42”cc LEBLOND REGAL Engine Lathe
Max. swing over bed and carriage wings 14” Max. swing over compound rest 8” Bed width 12 3/16” Spindle bore 1 13/32” Spindle nose L00 tapered key Cross slide travel 8 7/8” Compound rest travel 3 7/8” Center size No. 3 M.T. Tailstock spindle diameter 1 5/16” Tailstock spindle travel 5” 12 Spindle speeds 45-1800 RPM 48 Feeds .0018-.106 IPR Thread range 4-224 T.P.I.
EQUIPPED WITH: Hardened replaceable bed ways Swivel compound 12”Dia. face plate 4-jaw chuck 6-jaw buck chuck Thread dial Micrometer carriage stop Turret type carriage longitudinal stop 3-point plain Steady rest Hand collet closer with nose Live center Chip Pan 3 H.P. 3/60/220-440 Volt Motor and controls Wired for 3/60/440 Volt operation
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 5940 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1980 Make - Mazak/HERCULES AJAX Model - HL-4000
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 5930 , Year = 1980 , Make = Mazak/HERCULES AJAX , Model = HL-4000
Category:General Purpose Lathe 15in. to 23in. swing
Capacity: 21”/28-1/8” x 160”cc HERCULES AJAX gap bed lathe
Ad #5930
Year:
1980
Make:
Mazak/HERCULES AJAX
Model:
HL-4000
Condition:
Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
8,500 lbs.
Dimension: L x W x H
242" x 37-3/8"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
21”/28-1/8” x 160”cc HERCULES AJAX gap bed lathe
Max. swing over bed 21” Max. swing over cross-slide 13-1/8” Max. swing through gap 28-1/8” Length of gap in front of face plate 6 ¾” Hole through spindle 3-1/8” Spindle nose D-1-8 Camlock Cross-slide travel 14-13/16” Compound rest tool slide travel 4-5/16” Bed width 14 ½” Tailstock spindle diameter 2-9/16” Tailstock spindle travel 5-7/8” Tailstock center size No. 4 M.T. 12 Spindle speeds 25-1500 RPM 76 Longitudinal feeds .0014 to .0559 IPR 76 Cross-feeds .0007 to .0280 IPR Thread range: Inch 4 to 56 T.P.I. Metric 0.5-7.0 mm Module 0.5-7.0 mm D.P. 4 to 56
EQUIPPED WITH:
Removable gap bed Hardened bedways Taper turning attachment Swivel compound Inch/metric threading with (5) change gears 18” dia. 4-jaw chuck with reversible jaws 12” dia. 3-jaw universal chck with reversible jaws (2) 10” dia. 3-point plain steady rests ALORIS square 4-way toolpost (1) Dead center (2) Pipe center Foot brake (3) Chip pans with coolant 10 H.P. 3/60/220-440 volt motor with controls Wired for 3/60/440 volt operation
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 5930 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1981 Make - ENTERPRISE Model - 1550
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 5929 , Year = 1981 , Make = ENTERPRISE , Model = 1550
Category:General Purpose Lathe 15in. to 23in. swing
Capacity: 15”/ 21 ½” x 50” cc ENTERPRISE Geared Head Gap bed lathe
Ad #5929
Year:
1981
Make:
ENTERPRISE
Model:
1550
Condition:
Very Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
2,450 lbs.
Dimension: L x W x H
87" x 43" x 62"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
15”/ 21 ½” x 50” cc ENTERPRISE Geared Head Gap bed lathe
Max. swing over bed 15” Max. swing through gap 21 ½” Length of gap in front of faceplate 5 ½” Max. swing over cross slide 9 7/16” Spindle bore 1 9/16” Spindle nose D-1-4 Camlock Center size No. 3 M.T. Cross slide travel 8 ½” Tailstock spindle diameter 1 31/32” Tailstock spindle travel 5 ½” Bed width 9 ½” 16 Spindle Speeds 45-2000 RPM 40 Longitudinal .0015-.0216 IPR 40 Cross feeds .0006-.009 IPR Thread Range: Inch 4-60 T.P.I. Metric .5-7.5 mm.
EQUIPPED WITH:
Geared head Flame hardened bed-ways Swivel compound Inch/Metric threading Removable gap bed T-slotted rear rest Thread indicator Hand collet closer with nose D 1-4 Camlock spindle nose 15” Dia. faceplate 8” Dia. 3-jaw universal chuck 1-axis Anilam D.R.O. (cross travel) 4” Dia. capacity 3-point plain steady rest Foot brake Pan bed 5 H.P. 3/60/220 Volt Motor with controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 5929 when Inquiring
Asking Price: $sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 7500 , Year = 1942 , Make = Monarch , Model = 27N
Category:Heavy Duty Large Lathe 24in. & over swing
Capacity: 1942 MONARCH 27N 30.5" x 108"cc Lathe
Ad #7500
Year:
1942
Make:
Monarch
Model:
27N
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
18,000 lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Arizona
Country:
USA
Price:
$SOLD USD
General Description
108" Betw Centrs 30.5" Swing 30 HP 6-303 RPM Tailstock Coolant System Chip Guard Fresh Paint
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Distance Between Centers 108" Swing 30.5" Weight 18000 LBS HP 30 RPM 6-303
Equipped With
Tailstock 3 Steady Rests 12",14",18" Bull nose Live Centers 4", 6", 7",12" 4 jaw Chuck 21" 3 Jaw chuck 18" Coolant System Chip Guard Fresh Paint
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1950 Make - MONARCH Model - Series 60
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7201 , Year = 1950 , Make = MONARCH , Model = Series 60
Category:General Purpose Lathe 15in. to 23in. swing
Capacity: 24” x 30” MONARCH Series 60 Engine Lathe
Ad #7201
Year:
1950
Make:
MONARCH
Model:
Series 60
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
6,400 lbs
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$SOLD USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
24” x 30” MONARCH Series 60 Engine Lathe
Raised in the Sand to swing over bed ways 24 ¼” Swing over cross slide 16 ½” Distance between centers 30” Hole through spindle 1 9/16” Center size No. 4 M.T. Spindle nose 6”-D-1 Camlock Compound rest top slide travel 4” Width of bed 17 5/8” Tailstock spindle diameter 3 1/8” Tailstock spindle travel 5” 16 Spindle speeds 17-700 RPM 66 Feeds .0014-.0841 IPR Thread range(66) 2-120 T.P.I.
EQUIPPED WITH:
Flame hardened bed ways Swivel compound 18” Dia. 4-jaw chuck 9” Dia. 6-jaw chuck Micro gauging dials Aloris tool post with (8) holders Micrometer carriage stop (2) Bed stops with dial indicators Live center (2) Jacobs drill chucks Thread dial Work light Pan bed and coolant 7 ½ H.P. 3/60/220-440 Volt Motor and Controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7201 when Inquiring
Asking Price: $SOLD
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 7200 , Year = 1954 , Make = LEBLOND , Model =
Category:General Purpose Lathe 15in. to 23in. swing
Capacity: 20” x 15’cc LEBLOND Heavy Duty Engine Lathe
Ad #7200
Year:
1954
Make:
LEBLOND
Model:
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
13,000 lbs
Dimension: L x W x H
262" x 67"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
20” x 15’cc LEBLOND Heavy Duty Engine Lathe
Max. swing over bed ways 23 ¾” Max. swing over compound rest 14 ½” Spindle bore 2” Spindle nose L-2 Center size No.5 M.T. Bed width 21 3/8” Cross slide travel 14 ½” Compound rest travel 4” Tailstock spindle travel 12” 32 Spindle speeds 9-800 RPM 60 Feeds .004-.250 IPR Thread range 1-60 T.P.I.
EQUIPPED WITH:
Hardened replaceable steel bed ways Swivel compound Taper turning attachment Rapid traverse attachment Rapid traverse to carriage L-2 nose 4-jaw chuck Aloris tool post with (11) holders (2) live centers Drill chuck Misc. tooling
15” Dia. cap. plain steady rest 8” Dia. cap. plain steady rest Boring bar holder w/ boring bar Pan bed and coolant 20 H.P. 3/60/220-440 Volt Motor w/ controls Wired for 3/ Volt operation
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7200 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7198 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1987 Make - CLAUSING METOSA Model - C 2087
FOR SALE: Ad # 7195 , Year = 1987 , Make = CLAUSING METOSA , Model = C 2087
Category:General Purpose Lathe 15in. to 23in. swing
Capacity: 20”/30 3/8” x 87”cc CLAUSING METOSA Gap Bed Lathe, Model C 2087
Ad #7195
Year:
1987
Make:
CLAUSING METOSA
Model:
C 2087
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
5400 lbs.
Dimension: L x W x H
134.5" x 40" x 52.5"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
20”/30 3/8” x 87”cc CLAUSING METOSA Gap Bed Lathe, Model C 2087
Center height 10 ¼” Max. swing over bed 20 7/8” Max. swing over carriage 18 7/8” Max. over cross slide 12 5/8” Bed width 13 ¾” Gap length in front of faceplate 8 5/8” Spindle bore 3 5/32” Spindle nose D1-8 Camlock Center taper No.5 M.T. Cross slide travel 14” Compound rest travel 6 ½” Tailstock spindle diameter 2 7/8” Tailstock spindle travel 7” 16 Spindle speeds 45-1600 RPM 55 Longitudinal feeds .0018-.052 IPR 55 Cross feeds .0005-.015 IPR Thread range: Inch 2-60 T.P.I. Metric 0.5-15 MM. Module .25-7.5 Diametral 4-120
EQUIPPED WITH:
Removable gap bed Hardened bed ways Inch/Metric dials Swivel compound with T-Slot Thread indicator 12” Dia. 3-jaw universal chuck 7 ¼” Dia. Cap. 3 point plain steady rest 4 Position carriage stop Headstock sleeve adapter (2) Dead centers (3) M.T. adapters TRAK 102, 2-axes digital readout Dorian quick-change tool post with (7) holders and (3) boring bar holders Chip pan, rear splash guard and coolant system 12 HP 3/60/230 Volt Main Drive motor w/ controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7195 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7199 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 7205 , Year = 1965 , Make = MONARCH , Model = EE
Category:Tool Room Lathe 8in. to 14in. swing
Capacity: 10” x 20”cc MONARCH EE Precision toolmaker’s Lathe
Ad #7205
Year:
1965
Make:
MONARCH
Model:
EE
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
3,350 lbs
Dimension: L x W x H
61" x 29"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
10” x 20”cc MONARCH EE Precision toolmaker’s Lathe
Max. swing over bed 12 1/2” Max. swing over cross slide 7 ¼” Max. distance between centers 20” Hole through spindle 1 13/32” Spindle nose D-1-3” Camlock Bed width 10 ½” Compound rest top slide travel 2” Tailstock Spindle diameter 1 ¾” Tailstock Spindle traverse 3 ½” Variable Spindle speed range 8 to 4000 RPM 50 feeds .005-.016 IPR Thread range 3-184 T.P.I.
EQUIPPED WITH:
Induction hardened bed-ways Swivel compound D-1-3” Camlock Spindle nose 6”Dia. 3-jaw chuck Hand collet closer with collet nose JACOBS collet chuck Taper turning attachment Square Toolpost Pan bed 5 H.P. with new AC inverter drive and controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7205 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7194 when Inquiring
Asking Price: $sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1979 Make - POREBA Model - TR135B
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7197 , Year = 1979 , Make = POREBA , Model = TR135B
Category:Heavy Duty Large Lathe 24in. & over swing
Capacity: 53”/65” x 33’cc TR135B POREBA Removable Gap Bed Lathe
Ad #7197
Year:
1979
Make:
POREBA
Model:
TR135B
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
40,000 lbs
Dimension: L x W x H
41'11" x 88" x 72"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
General Description
53”/65” x 33’cc TR135B POREBA Removable Gap Bed Lathe
Length between centers 394” Max. swing over bed 53.5” Max. swing over carriage 43.3” Max. swing in gap 65” Length of gap 15.3” Bed width 26” Spindle nose A1-11” Spindle bore 4 1/8” Tailstock quill diameter 5 ½” Tailstock quill travel 12” Tailstock quill taper No.6 M.T. Max. work piece weight between centers 17,500 lbs Max. work piece weight with one steady 22,000 lbs Max. work piece weight with two steadies 24,000 lbs 21 Spindle speeds 5-500 RPM 122 Longitudinal feeds .0017-.126 IPR 122 Cross feeds .0008-.063 IPR Thread range: Inch ¼ to 30 T.P.I. Metric 1-120 mm Longitudinal rapid traverse of carriage 13 FPM Approx. top slide travel 19 ½”
EQUIPPED WITH:
Induction-hardened bed ways (2) Carriages with power drive to top slide, rapid traverse and thread dials Gap bed Swivel compounds Swing type chuck guard Inch/Metric threading with (7) change gears (27,44,54,57,62,68,74) Built-in 4-way tool posts 39.37” Dia. 4-jaw chuck 36” Dia. T-Slotted Faceplate (2) 31” Dia. cap. 3 point roller steady rests (1) 18” Dia. cap. 3 point roller steady rests (1) 12” Dia. cap. 3 point roller steady rests Heavy Duty long reach boring bar with holder (3) M.T. adapters (2) Live centers (1) Headstock adapter sleeve with dual center Chip pans with coolant system (2) Work lights 41 HP Main drive Motor with controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1966 Make - CINCINNATI Model - LR
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7206 , Year = 1966 , Make = CINCINNATI , Model = LR
Category:General Purpose Lathe 15in. to 23in. swing
Capacity: 17” x 30”cc CINCINNATI Hydrashift Toolroom Precision Lathe, Model LR
Ad #7206
Year:
1966
Make:
CINCINNATI
Model:
LR
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
3,300 lbs.
Dimension: L x W x H
85" x 45" x 60"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
17” x 30”cc CINCINNATI Hydrashift Toolroom Precision Lathe, Model LR
Max, swing over bed 17 1/8” Max. swing over cross-slide 11 ¼” Max. center distance 33” Spindle nose L-1 Size of center No.4 M.T. Spindle bore 1 ¾” Bed width 13 7/8” Cross-slide travel 12” Top slide travel 3 ¼” Tailstock spindle diameter 2 ¼” Tailstock spindle travel 5” Taper attachment capacity 4” taper per ft x 16”L 12 Spindle speeds 25-980 RPM 48 Feeds .0019-.1215 IPR Thread range 1 ½ to 92 T.P.I.
EQUIPPED WITH:
Flame hardened bed ways Swivel compound Taper turning attachment Hydrashift pre-selective speed shifting 10” Dia. 3-jaw universal chuck Coolant pump w/ piping Chip pan 5 H.P. 3/60/208-220-440 Volt Motor w/ controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7206 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1942 Make - AXELSON Model - 24 H.D.
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7202 , Year = 1942 , Make = AXELSON , Model = 24 H.D.
Category:Heavy Duty Large Lathe 24in. & over swing
Capacity: 28" x 120"cc AXELSON Heavy Duty Engine Lathe, Model 24 H.D.
Ad #7202
Year:
1942
Make:
AXELSON
Model:
24 H.D.
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
18,000 lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
28" x 120"cc AXELSON Heavy Duty Engine Lathe, Model 24 H.D.
Max. swing over bedways: 28 3/4" Max. swing over cross slide: 18 3/4" Bed width: 26" Hole through spindle: 2 5/16" Spindle nose: 11" D-1 Travel of cross slide: 16 3/4" Tailstock spindle diameter: 41/2" Size of centers: No.5 M.T. 24 spindle speeds 6 to 555 RPM 81 feeds .004 to .300 IPR Thread range: 1 to 30 T.P.I
EQUIPPED WITH:
Swivel compound Camlock spindle nose 4-jaw chuck 14 3/4" Dia. capcity 3-point roller steady rest Plain follow rest Micrometer carriage stop (2) Boring holders w/(1) boring bar Pan bed with coolant tank ( less pump) Work light 20 H.P. 3/60/220 Volt Motor
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7202 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7208 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 7180 , Year = , Make = Enco , Model = 111-3320
Category:General Purpose Lathe 15in. to 23in. swing
Capacity: 14" x 40" Enco Manual Lathe with 2-axis DRO
Ad #7180
Year:
Make:
Enco
Model:
111-3320
Condition:
Very Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
2,500 lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
North Carolina
Country:
USA
Price:
$Sold USD
General Description
Accurite 2-axis DRO 14" swing Over Bed 8-5/8" swing Over Cross Slide 40" distance Between centers 20" swing Over gap 16 Spindle Speeds 90-1800 RPM Range of Spindle Speeds 1-1/2" Hole Through Spindle MT#5 Taper of Spindle Bore MT#3 Tailstock Quill Taper 4-1/2" Tailstock Quill Travel 7" Cross Slide Travel 22 Number Of Metric Threads .45-7.5MM Range of Metric Threads 40 Number of Inch Threads 4-112 TPI Range of Inch Threads (40) .0012-.0294 in/rev. Longititudinal Feeds (40) .0003-.010 in/rev. Cross Feeds
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1997 Make - Leblond-Makino Model - A77
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7038 , Year = 1997 , Make = Leblond-Makino , Model = A77
Category:Horizontal Machining Centers (HMC)
Capacity: One (1) 1997 Leblond-Makino A77
Ad #7038
Year:
1997
Make:
Leblond-Makino
Model:
A77
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$sold USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
One (1) 1997 Leblond-Makino A77
Pallet Size 24.8" x 24.8" Max Pallet Load 2,640 Lbs X Axis Traverse 31.5" Y Axis Traverse 29.5" Z Axis Traverse 30.3" B Axis Traverse 1 Degree Indexing Rapid Traverse (all Axes) 1181 IPM Cutting Feeds (all Axe) 1181 IPM Distance From Table to Spindle 3.9"-33.5" Distance from Center to Spindle 7.1"-37.4" Spindle Motor 30/40 HP Spindle Speed 10,000 RPM ATC 40 Stations Tool Change Time 2 Seconds Max Tool Dia 4.92"/11.8" Max Tool Length 17.7" Max Tool Weight 44 lbs Fanuc Professional 3 Control (Fanuc 16) 1 Degree 4th axis Standard Coolant Thru Chip Conveyor
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7038 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 2003 Make - MAZAK Model - PFH 5800
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7040 , Year = 2003 , Make = MAZAK , Model = PFH 5800
Category:Horizontal Machining Centers (HMC)
Capacity: One (1) 2003 MAZAK PFH 5800
Ad #7040
Year:
2003
Make:
MAZAK
Model:
PFH 5800
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
One (1) 2003 MAZAK PFH 5800
Number of Pallet Stations 6 Pallet Size 19.69" x 19.69" X Axis Travel 28.74" Y Axis Travel 28.74" Z Axis Travel 29.13" Table Indexing .001 N/C Controuring Max Table Load 1543 Lbs Spindle Center To Table Top 3.15"-31.89" Spindle Drive Motor 30 HP AC Spindle Taper CAT # 40 Spindle Speeds 15,000 RPM Number of Ranges 2 Rapid Traverse Rate 2,362 IPM X,Y,Z Max Programmable Feedrate 2,362 IPM Auto Tool Change Capacity 80 Tools Machine Weight 22,400 Lbs Equipped With Mazatrol 640M Conversational Control (6) Station Pallatech With (6) Pallets and (1) Load Station Cell Controller With Version E Software EIA/ISO Measuring System Software EIA/ISO Programming Tool Life Management Tool Breakage Detection High Pressure Superflow II Thru Spindle Coolant System 80 Tool Capacity Monitoring System B With MP700 Probe Performance CNC Package Inch/Metric Conversion Network Interface Operator Door Interlock N/C Rotary Table Transformer Work Piece Air Blast Chip Conveyor Adaptive Feedrate Control Tool Life Monitoring
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 2000 Make - Kitamura Model - HX-500i
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7037 , Year = 2000 , Make = Kitamura , Model = HX-500i
Category:Horizontal Machining Centers (HMC)
Capacity: One (1) 2000 Kitamura HX-500i
Ad #7037
Year:
2000
Make:
Kitamura
Model:
HX-500i
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
44,440 lbs
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Arizona
Country:
USA
Price:
$Sold USD
General Description
One (1) 2000 Kitamura HX-500i
Pallet Table Size 19.7" x 19.7" Travels X Axis 34.3" Travels Y Axis 28" Travels Z Axis 26" Max Load on Table 1760 Lbs (full 4th) Spindle Speed 12,000 RPM SpindleTaper CAT # 50 Tool Magazine Capacity 50 ATC Tool Change Time 2.0 Seconds Rapid Traverse Rates 1969 IPM Main Motor 35 HP Chip to Chip Time 6 Seconds
Equipped With Fanuc 16iM CNC Control Coolant Thru Spindle Chip Conveyor Solid Box Ways All Available Manuals
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7034 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7014 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1999 Make - BOSTOMATIC Model - BG12G
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6999 , Year = 1999 , Make = BOSTOMATIC , Model = BG12G
Category:Vertical Machining Centers (VMC)
Capacity: 1999 BOSTOMATIC BG12G Vertical Machining Center
Ad #6999
Year:
1999
Make:
BOSTOMATIC
Model:
BG12G
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
Buyers Premium: A 7 % Buyers Premium applies to the final sale price of this item
General Description
One (1) 1999 BOSTOMATIC BG12G
BDC 3200 Control
Longitudinal X Axis Travel 14.9" Transverse Y Axis Travel 15.3" Vertical Z Axis Travel 10.0" Max Routing Speed 30,000 RPM Tool Holding Fixture HKS 40 Tool Changer 6 Mag Spaces Work Table Table Surface 16.6" x 13.0" Max Table Load 154 lbs Machine Base Polymer Concrete Weight 6,994 lbs HSK 30 Spindle Grease Lubricated Motor Spindle With 30,000 min specially for graphite and other dust raising materials Ethernet Connection 15" Screen Color Electronic Handwheel Min Quanuty Lubrication Pneumatic Over Pressure on the measuring systems and on the motor spindle Efficent graphite dust extraction Tool changer Digital drive technology Digital measuring systems with high resolution Operator friendly shop optimised control 3 Axis CDAM BSC 3200 (Heidenham) Torit Mist Extractor Prestressed Recirculating Ball Screw For Highest Precision Completely Enclosed Machine in order to elimiate all emissions Largest possible front door with large window Graphite extractor unit integrated into the machine bed Liquid Cooled Motor Spindle New Spindle in 2002 6900 Hours
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6999 when Inquiring
Asking Price: $Sold
Buyers Premium:A 7 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6994 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6987 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6982 when Inquiring
Asking Price: $sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6988 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6986 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1997 Make - MAZAK Model - HV-800X DUAL PALLET
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6926 , Year = 1997 , Make = MAZAK , Model = HV-800X DUAL PALLET
Category:Horizontal Machining Centers (HMC)
Capacity: MAZAK MODEL HV-800X DUAL PALLET, UNIVERSAL HEAD MACHINING CENTER
Ad #6926
Year:
1997
Make:
MAZAK
Model:
HV-800X DUAL PALLET
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
30,000 Lbs.
Dimension: L x W x H
232" x 164" x 145"
Machine Location:
City:
On Request
State:
Illinois
Country:
USA
Price:
$sold USD
General Description
MAZAK MODEL HV-800X DUAL PALLET, UNIVERSAL HEAD MACHINING CENTER
(2) Pallet Size: 31.5" x 31.5" Maximum Pallet Weight Capacity: 4850 Lbs. X-Axis Travel: 49.2" Y-Axis Travel: 39.4" Z-Axis Travel: 41.3" C-Axis Travel: .001 Degree Head Rotation: 1 Degree Spindle Speeds: 35 - 4,000 RPM Spindle Taper: BT 50 Spindle Drive Motor: 25/30 HP Distance Spindle Nose to Pallet: 1.9" - 43.3" Distance Spindle Center to Pallet: 3" - 46.4"
EQUIPPED WITH:
Mazatrol M-Plus CNC Control Universal Head Rigid Tapping Air Blast Coolant System and Chip Conveyor (40) Position Automatic Tool Changer Thru Spindle Coolant Auto Tool Length/Broken Tool Detection
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6924 when Inquiring
Asking Price: $SOLD
Buyers Premium:A 7 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6923 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6925 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6912 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
ACER E-mill Bed Type Milling Machine Sony 3-Axis CNC Control Auto Lube System C5 Ball Screws and Bearings Built-in Coolant System Halogen Light Full Length Splash Guard & Chip Pan
ULTRA HIGH QUALITY ACER E-MILL MILLING MACHINE:
5 HP "Super E" Baldor Motor Infinite 50 ~ 3,750 RPM Speed AC Frequency Drive HRC 52° Hardened and Ground Table Turcite-B Coated Slide-way and Gibs Precision Spindle w/ ABEC-7 Bearing Meehanite Casting Automotive Painting Rugged 13" x 50" Table Size 1-1/4" Diameter Ball Screws with Casted Mounting Brackets Hardened & Ground X, Y, & Z Table Top and Bottom to HRC 52° XYZ Travel: 32" x 19" x 23" N.S.T. #40 Taper Class 7 Precision Spindle Bearing Precision 4" Diameter Hard Chromed Quill at HRC 62° Turcite-B Lining Saddle Ways to Reduce Metal Wear Max. Load on Table: 1,700 lbs.
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6800 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6797 when Inquiring
Asking Price: $sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6791 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6783 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6786 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6764 when Inquiring
Asking Price: $Sold
Buyers Premium:A 7 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6761 when Inquiring
Asking Price: $Sold
Buyers Premium:A 7 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6767 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6623 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 2003 Make - MORI-SEIKI Model - SH-8000
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6624 , Year = 2003 , Make = MORI-SEIKI , Model = SH-8000
Category:Horizontal Machining Centers (HMC)
Capacity: MORI-SEIKI MODEL SH-8000 HORIZONTAL MACHINING CENTER W/ FANUC CONTROL
Ad #6624
Year:
2003
Make:
MORI-SEIKI
Model:
SH-8000
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
48,620 lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Texas
Country:
USA
Price:
$Sold USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
MORI-SEIKI MODEL SH-8000 HORIZONTAL MACHINING CENTER WITH FANUC CONTROL
SPECIFICATIONS: X axis travel: 51.2" Y axis travel: 47.2" Z axis travel 43.3" Distance from table surface to spindle center: 2-49.2" Distance from table center to spindle gage plane: 7.9"-51.2" Working surface: 31.5x31.5" Max workpiece swing diameter: 51.1" Table loading capacity: 4,400 lbs. Max workpiece height: 51.1" Pallet surface configuration: Tapped Table indexing time (90°/180°): 3.4/4.2 sec. Max spindle speed: 10,000 Rapid traverse rate: 1,653 ipm Feedrate: .01-826 ipm Type of tool shank: CAT 50 Type of retention knob: Mori 90 deg. type Tool storage capacity: 60 positions Max tool diameter : 4.92"(12.6") Max tool length: 19.7" Max tool mass: 66 lbs. Method of tool selection: Fixed address Tool changing time tool to tool: 2/3 sec. Number of pallets: 2 Method of pallet change: Turn type Pallet changing time: 14 sec. Spindle drive motor (30 min/cont): 40/33.5 hp Feed motor (X/Y/Z): 7.9,9.8,9.8 hp Coolant tank capacity: 184 gal
STANDARD ACCESSORIES: MAPPS conversational graphic control Load monitor C Tool Life management Chip conveyor inside machine (spiral type) Coolant system Shower coolant Oil hole drill coolant system Tool tip air blow system Oil cooler Automatic power off system Built in worklight Signal indicator Hand tools
CONTROL: Fanuc model 18Ita inluding Mori Seiki MAPPS conversational / Graphic
OPTIONAL ACCESSORIES: 6000 RPM spindle External chip conveyor ( hinge type rear discharge ) Optical scale feedback Through spindle coolant I/F ( center ) 1000 PSI HP Cool Jet 70/30SF
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6624 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6616 when Inquiring
Asking Price: $Sold
Buyers Premium:A 7 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 2004 Make - TARUS Model - HS-8412/54
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6501 , Year = 2004 , Make = TARUS , Model = HS-8412/54
Category:Gantry Type Mills and Routers
Capacity: TARUS MODEL HS-8412/54 HIGH SPEED DUAL COLUMN CNC MILL
Ad #6501
Year:
2004
Make:
TARUS
Model:
HS-8412/54
Condition:
Excellent
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Michigan
Country:
USA
Price:
$Sold USD
General Description
TARUS MODEL HS-8412/54 HIGH SPEED DUAL COLUMN CNC MILL
TABLE SIZE.................................: 72" X 120" TABLE CAPACITY.............................: 50,000 LBS WIDTH BETWEEN COLUMNS......................: 96" DAYLIGHT...................................: 54" CROSS TRAVEL (Y)...........................: 114" LONGITUDINAL TRAVEL (X)....................: 120" VERTICAL TRAVEL (Z)........................: 44" CUTTING HEAD ROTATION (A AXIS).............: 360 DEGREES CUTTING HEAD ANGLE (B AXIS)................: 0 - 45 DEGREES SPINDLE SPEEDS (DIRECT DRIVE)..............: 0 - 10,000 RPM SPINDLE DRIVE..............................: 10 HP (14.7 HP 30 MIN) SPINDLE TAPER..............................: CAT 50 MAX CUT FEED RATE..........................: 400" / MIN MAX RAPID TRAVERSE.........................: 500" / MIN CONTROL TYPE...............................: DUAL CNC, CREATIVE EVOLUTION & TARUS
EQUIPPED WITH:
WATER COOLED SPINDLE & SPINDLE MOTOR WATER COOLED 2.25" BALL SCREWS WATER CHILLER UNIT Z AXIS BOX WAYS A & B AXES CNC POSITIONED, HYDR./MECH. LOCK/UNLOCK CREATIVE EVOLUTION V 2.01D SOFTWARE T SLOTTED TABLE 15" X 18" GRID, 1" SLOTS LOW OPERATING HRS (APPR. 1,000 HRS.)
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6201 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
PALLET WORKING AREA ----------------------- 30" X 15" TABLE TRAVEL ---- ( X ) ------------------- 24" TABLE TRAVEL ---- ( Y ) ------------------- 15.7" HEAD TRAVEL ----- ( Z ) ------------------- 15.7" DISTANCE SPINDLE TO TABLE ----------------- 4.9" TO 20.6" COLUMN TO SPINDLE CENTER ------------------ 16.9" MAXIMUM PALLET LOAD ----------------------- 660 LBS. SPINDLE TAPER ----------------------------- #40 TAPER SPINDLE SPEEDS ---------------------------- 60 TO 6000 RPM RAPID TRAVERSE ---------------------------- 700 IPM SPINDLE DRIVE MOTOR ----------------------- A.C. EQUIPPED WITH ---
FANUC OMC CNC CONTROL 18 STATION AUTOMATIC TOOL CHANGER 2 PALLET AUTOMATIC PALLET CHANGER FULL ENCLOSURE COOLANT SYSTEM 6" TSUDAKOMA #RNCX151LR 4TH AXIS TABLE WITH TPC JR. CONTROLLER, TAILSTOCK
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1985 Make - MAZAK Model - SV20 POWERCENTER
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6203 , Year = 1985 , Make = MAZAK , Model = SV20 POWERCENTER
Category:Vertical Machining Centers (VMC)
Capacity: CNC VERTICAL MACHINING CENTER
Ad #6203
Year:
1985
Make:
MAZAK
Model:
SV20 POWERCENTER
Condition:
Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
Dimension: L x W x H
120" x 178" x 118"
Machine Location:
City:
On Request
State:
Illinois
Country:
USA
Price:
$Sold USD
General Description
4TH AXIS READY TABLE SIZE, WORKING SURFACE --------------- 23-1/2" X 48" TABLE TRAVEL --------------- ( X ) -------- 40" TABLE TRAVEL --------------- ( Y ) -------- 25" TABLE TRAVEL --------------- ( Z ) -------- 21.65" DIST. SPINDLE NOSE TO TABLE SURFACE ------- 7.8" MIN. DIST. SPINDLE NOSE TO TABLE SURFACE ------- 29.5" MAX. DIST. FROM SPDL. CENTER TO COLUMN FRONT --- 25.5" TAPER IN SPINDLE -------------------------- ISO #50 SPINDLE SPEED RANGE ----------------------- 20 TO 3600 RPM AUTOMATIC TOOL CHANGER CAPACITY ----------- 40 TOOLS TABLE LOAD CAPACITY ----------------------- 3307 LBS. MAIN DRIVE MOTOR, CONTINUOUS/30 MIN. ------ 15/20 HP A.C. EQUIPPED WITH ---
WIRED FOR 4TH AXIS M2 MAZATROL CONVERSATIONAL CNC CONTROL 40 STATION AUTOMATIC TOOL CHANGER HARDENED & GROUND BOX WAY CONSTRUCTION 2 SPEED RANGE GEARED HEADSTOCK COOLANT SYSTEM HYDRAULIC SYSTEM 1/2 HEIGHT GUARDING WORK LIGHT
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6204 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1992 Make - CINCINNATI Model - SABRE 500
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6175 , Year = 1992 , Make = CINCINNATI , Model = SABRE 500
Category:Vertical Machining Centers (VMC)
Capacity: CNC VERTICAL MACHINING CENTER
Ad #6175
Year:
1992
Make:
CINCINNATI
Model:
SABRE 500
Condition:
Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
8,125 lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Illinois
Country:
USA
Price:
$Sold USD
General Description
CNC VERTICAL MACHINING CENTER
TABLE SIZE ---- ( WORKING SURFACE ) ------- 17" X 25.5" TRAVELS: LONGITUDINAL- ( TABLE, X-AXIS ) --------- 20" CROSS ------- ( SADDLE, Y-AXIS ) -------- 15" VERTICAL ---- ( SPINDLE CARRIER, Z-AXIS ) 20" SPINDLE SPEED RANGE ----------------------- 60 TO 6000 RPM SPINDLE TAPER ----------------------------- CAT. 40 FEED RATES ---------- ( X, Y, Z ) --------- .1181 TO 590 IPM RAPID TRAVERSE RATE - ( X, Y, Z ) --------- 590 IPM TOOL CHANGER POSITIONS -------------------- 21 MAXIMUM TABLE LOAD ------------------------ 771 LBS. SPINDLE DRIVE ----------------------------- 15/7.5 HP EQUIPPED WITH ---
ACRAMATIC 850SX CNC CONTROL FULL ENCLOSURE 21 POSITION AUTOMATIC TOOL CHANGER COOLANT SYSTEM MANUAL PULSE GENERATOR STAINLESS STEEL WAY COVERS SPINDLE CHILLER
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6051 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6052 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6055 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 5900 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 7508 , Year = 2006 , Make = Haas , Model = HRT 310
Category:CNC Parts and Accessories
Capacity: 2006 Haas HRT 310 CNC Rotary Table
Ad #7508
Year:
2006
Make:
Haas
Model:
HRT 310
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
435 lbs
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$SOLD USD
General Description
HRT 310 SP Wrap Around Motor
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7507 , Year = 2003 , Make = Haas , Model = HRT 310
Category:CNC Parts and Accessories
Capacity: 2003 Haas HRT 310 Rotary Table
Ad #7507
Year:
2003
Make:
Haas
Model:
HRT 310
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
435 lbs
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$SOLD USD
General Description
HRT 310 SP Wrap Around Motor Motor Just Rebuilt
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 2000 Make - Haas Model - TRT-210-5-AX
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7509 , Year = 2000 , Make = Haas , Model = TRT-210-5-AX
Category:CNC Parts and Accessories
Capacity: 2000 Haas TRT-210-5-AX Rotary Table
Ad #7509
Year:
2000
Make:
Haas
Model:
TRT-210-5-AX
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
Tilt and Rotating 5 Axis Rotary Table With 5 Axis Card
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7477 , Year = 1981 , Make = PDA , Model = P/C 50
Category:Gantry Type Mills and Routers
Capacity: PDA P/C 50 3Axis CNC Router
Ad #7477
Year:
1981
Make:
PDA
Model:
P/C 50
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
(3) Aixs Router 21.13" x 24.13" Table Size 2.0" Z Axis Travel Vacuum Table Quick Change (2) HP Tool Holders Turbo Cam Control
Full Machine Specifications
Number Of Axis 3 Table Size 22" x 24" Table has Patented vacuum scavenge/brush hold- down system. (does not include vacuum pump) Y- Axis Travel 24.13" X - Axis Travel 21.13" Z - Axis Travel 2.0" Number Of spindles Single Horsepower 2 @ 24,000 rpm Max Spindle Speed 400 IPM Quick Change Tool Holders for 1/8" shank tools, 3/8 - Collet Capacity Phenolic Tooling Plate Cutter Radius Compensation Nested Subroutines for step and repeat functions Tooling and programming macros for test coupon-fabrication 1.2 MB, 3.5" micro floppy disc Menu Driven or EIA RS-274-D programming Controls TurboCam Electrics 230/460 vac, 20/10 amps MACHINE HAS BEEN RURFURBISHED AND HAS - "0" HOURS OF USE
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7468 , Year = 1995 , Make = Multicam , Model = 48
Category:Gantry Type Mills and Routers
Capacity: 1995 Multicam 48 CNC 3 Axis Router
Ad #7468
Year:
1995
Make:
Multicam
Model:
48
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
Spindle 48" x 96" Table T-Lock Hold Downs 5 HP Perske Motor PLC/Softward Vacuum System (2) Xtra Perske Heads
Full Machine Specifications
Number Of Axis 3 Number Of Tables 1 Table Size 48" x 96" Table Hold Down "T" Lock Material Hold down Number Of Spindles Single Spindle Motor Perske 5 HP Spindle Drive Stepper Motor Accuracy (max speed) +/- .002/ft 4" second Maximum Weight 800 lbs. Controls PLC Software includes CASmate scan / 3-D Import / Export clean up In/outline / router offsets. Hatch and island fill for - engraving. Full Scanning and line conversion capa- bilities with 3-D machine tool path generation for - interactive "z" control on the fly Includes (2) Extra Perske Motor Heads 1.5 HP Vacuum Pump for product hold down Computer / Software Monitor, HP Scanjet 3P & Printer Electrics 220v / 60 amps
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1989 Make - Accu-Router Model - Powermatic Series II
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7472 , Year = 1989 , Make = Accu-Router , Model = Powermatic Series II
Category:Gantry Type Mills and Routers
Capacity: 1989 Accu-Router Powermatic Series II 3 Axis CNC Router
Ad #7472
Year:
1989
Make:
Accu-Router
Model:
Powermatic Series II
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
(3)Axis 4' x 10' Table 15 HP Single Spindle 6" Z-Axis Fanuc GNO Series
Full Machine Specifications
Number Of Axis 3 Number Of Tables Single Table Size 48" x 120" Vacuum Table No Number Of Spindles One Z - Axis Travel 6" Horsepower 15 / 10 - 18,000 rpm Controls Fanuc GNO Series Material cutPlywood & Polypropylene Plastic (starboare)
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 2005 Make - Bridgeport Model - DT480-P3
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7483 , Year = 2005 , Make = Bridgeport , Model = DT480-P3
Category:Drilling / Tapping Centers
Capacity: 2005 Bridgeport DT480-P3 CNC Drilling & Tapping Center
Ad #7483
Year:
2005
Make:
Bridgeport
Model:
DT480-P3
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
5,800 lbs.
Dimension: L x W x H
86" x 60" x 92"
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
Fanuc Oi-MC Travels: 18.9" x 15.8" x 16.9" 15K RPM 7.5 HP BT30 20 ATC Coolant Flush & Wash Down Hose
Full Machine Specifications
Fanuc Oi-MC Control Travels: 18.9" x 15.8" x 16.9" Table Size: 23.6" x 15.8" Table Max Load: 551 lbs Rapids: 1,890 IPM 15,000 RPM 7.5 HP Direct Drive BT-30 20 ATC- Swing Arm Option Coolant Flush System Coolant Wash Down Hose
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7473 , Year = 2005 , Make = Liberty , Model =
Category:Gantry Type Mills and Routers
Capacity: 2005 Liberty CNC Routers 3 Axis
Ad #7473
Year:
2005
Make:
Liberty
Model:
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
2005 Liberty CNC Router Table Size 24" x 42" Single Table Number of Spindles 1 Equipped with Vexta Control
Full Machine Specifications
3 Axis CNC Router For Small Parts # Of Axis 3 Table Size 24" x 42" Single Table Table Hold Down(s) "T" Slots Number Of Spindles 1 Z - Axis Travel 1" Horsepower .05 Controls Vexta Includes Engraver Head
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1998 Make - Techno Model - HX33VBM4896010
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7479 , Year = 1998 , Make = Techno , Model = HX33VBM4896010
Category:Gantry Type Mills and Routers
Capacity: 1998 Techno Model HX33VBM4896010 3 Axis CNC Router
Ad #7479
Year:
1998
Make:
Techno
Model:
HX33VBM4896010
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$sold USD
General Description
Full Machine Specifications
# Of Axis 3 Table 48" x 96" # Of Spindles Single Horsepower 5 Motor Make Colombo (includes an extra 3 axis 5.5 hp Perske motor) X-Axis Travel 96" Y-Axis Travel 60" Z-Axis Travel 18.7" Controls Computer Base Controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
(4) Axis Cnc Router Working Center 60" x 120" Bed Single Spindle 18 hp @ 14,000 rpm Tool Tool Changer Compressor Dust collector Pod & Rail System Hand Held Controls COMPLETE SYSTEM
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
(2000) Northwood Model NW-265MC1D1 Dual 6' x 5' Table (3) Axis Tool Holder 14.0" Z-Axis 17.4 HP GE Fanuc Controls
Full Machine Specifications
"UNDER A 1000 HOURS OF USE!" Number Of Axis 3 Number Of Tables 2 Table Size 72" x 60" Axes Travel/Speed X - Axis: 200.00" Rapid Traverse Rate 0 to 2500" / Min. Y - Axis: 68.0" Rapid Traverse Rate 0 to 2500" / Min. V - Axis: 68.0" Rapid Traverse Rate 0 to 2500" / Min. Z - Axis: 14.0" Rapid Traverse Rate 0 to 500" / Min. Cutting Feed Rate X - Axis 1200" / Min Y - Axis 1200" / Min V - Axis 1200" / Min Z - Axis 500" / Min C-Axis 360 Degrees Distance Between Tables 2" Main Shank Size 1" Maximum Collets (4) 1/4" ER-40 (4) 1/2" ER-40 (4) 3/4" ER-40 Tool Holders (12) HSK-63F Collet Chuck (RH) Tooling Length (extended from tool holder) 4" Maximum Cutter Diameter 4.5" Main Spindle Power 17.4 HP (13 kw) Spindle Speed 3600 - 18000 rpm Shank Size (Boring Unit) 10 mm (10H7) Boring Unit Power 2.5 hp Boring Unit Speed 4000 rpm Controls GE/Fanuc 160i-MA Controls Includes Advanced Preview Control (APC) MPG Handle, RS-232C/PCMCIA interfaces, 32k memory (4 wire grounded) SUPER CLEAN
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
We found 51 matching ads. Now displaying the remaining 51 ads.
FOR SALE: Year - 1960 Make - GIDDINGS & LEWIS FRASER Model - 340TX
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6989 , Year = 1960 , Make = GIDDINGS & LEWIS FRASER , Model = 340TX
Category:Horizontal Boring Mills
Capacity: 4" GIDDINGS & LEWIS FRASER MODEL 340T TABLE TYPE HORIZ BORING MILL
Ad #6989
Year:
1960
Make:
GIDDINGS & LEWIS FRASER
Model:
340TX
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
40,000 LBS.
Dimension: L x W x H
21'1" x 12'3" x 11'5"
Machine Location:
City:
On Request
State:
Texas
Country:
USA
Price:
$SOLD USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
USED 4" GIDDINGS & LEWIS FRASER MODEL 340T TABLE TYPE HORIZONTAL BORING MILL
SPINDLE DIAMETER: 4" SPINDLE TAPER: NO. 50 SPINDLE SPEEDS: LOW 10 TO 600 RPM HIGH 650 TO 1300 RPM TABLE SIZE: 48" X 96" CROSS TRAVEL OF TABLE: 84" LONGITUDINAL TRAVEL OF TABLE: 84" VERTICAL TRAVEL OF HEADSTOCK: 60" SPINDLE FEEDS: .002 TO .250 IPR MILLING FEEDS TO ALL UNITS: .16 TO 140 IPM RAPID TRAVERSE TO ALL UNITS: 140 IPM LONGITUDINAL TRAVEL OF TABLE: 60" WIDTH OF BED: 36" WIDTH OF BED WAYS: 8" WIDTH OF COLUMN: 22" WIDTH OF COLUMN WAYS: 4" MOTOR: 20 HP EQUIPPED WITH: HARD BED & SADDLE WAYS OUTRIGGERS 3-AXIS DRO POWER DRAW BAR RAPID TRAVERSE - ALL DIRECTIONS
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6989 when Inquiring
Asking Price: $SOLD
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1987 Make - BRIDGEPORT Model - SERIES I
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6957 , Year = 1987 , Make = BRIDGEPORT , Model = SERIES I
Category:Knee Mills (Bridgeport Type)
Capacity: 2 HP BRIDGEPORT SERIES I VERTICAL MILL
Ad #6957
Year:
1987
Make:
BRIDGEPORT
Model:
SERIES I
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
2400 LBS.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Illinois
Country:
USA
Price:
$sold USD
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item
General Description
2 HP BRIDGEPORT SERIES I VERTICAL MILL
SURFACE AREA OF WORK TABLE ---------------- 9" X 48" TABLE TRAVEL ------------ ( X AXIS ) ------ 36" LONGITUDINAL SADDLE TRAVEL ----------- ( Y AXIS ) ------ 12" CROSS SPINDLE QUILL TRAVEL ---- ( Z AXIS ) ------ 5" VERTICAL KNEE TRAVEL ------------------------------- 16" VERTICAL SPINDLE QUILL SPEEDS ---- ( VARI-SPEED ) -- TO 4200 RPM SPINDLE QUILL INTERNAL TAPER -------------- R-8 HEAD TILT FRONT TO BACK ------------------- +/- 45 DEG. HEAD TILT SIDE TO SIDE -------------------- +/- 90 DEG. MAIN DRIVE MOTOR -------------------------- 2 HP
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6957 when Inquiring
Asking Price: $sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1985 Make - BRIDGEPORT Model - SERIES I
FOR SALE: Ad # 6956 , Year = 1985 , Make = BRIDGEPORT , Model = SERIES I
Category:Knee Mills (Bridgeport Type)
Capacity: 2 HP BRIDGEPORT SERIES I VERTICAL MILL
Ad #6956
Year:
1985
Make:
BRIDGEPORT
Model:
SERIES I
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
2200 LBS.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Illinois
Country:
USA
Price:
$Sold USD
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item
General Description
2 HP BRIDGEPORT SERIES I VERTICAL MILL
SURFACE AREA OF WORK TABLE ---------------- 9" X 42" TABLE TRAVEL ------------ ( X AXIS ) ------ 30" LONGITUDINAL SADDLE TRAVEL ----------- ( Y AXIS ) ------ 12" CROSS SPINDLE QUILL TRAVEL ---- ( Z AXIS ) ------ 5" VERTICAL KNEE TRAVEL ------------------------------- 16" VERTICAL SPINDLE QUILL SPEEDS ---- ( VARI-SPEED ) -- TO 4200 RPM SPINDLE QUILL INTERNAL TAPER -------------- R-8 HEAD TILT FRONT TO BACK ------------------- +/- 45 DEG. HEAD TILT SIDE TO SIDE -------------------- +/- 90 DEG. MAIN DRIVE MOTOR -------------------------- 2 HP
EQUIPPED WITH ---
SONY 2 AXIS DIGITAL READOUT CHROME WAYS ONE SHOT MACHINE LUBRICATION SYSTEM LONGITUDINAL POWER FEED .75 TO 30 IPM RAPID TRAVERSE COLLETS WORK LIGHT
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6956 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6955 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1952 Make - GIDDINGS & LEWIS Model - Type 64, Hypro
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6719 , Year = 1952 , Make = GIDDINGS & LEWIS , Model = Type 64, Hypro
Category:Vertical Boring Mills
Capacity: 64” GIDDINGS & LEWIS Hypro Vertical Boring Mill, Type 64
Ad #6719
Year:
1952
Make:
GIDDINGS & LEWIS
Model:
Type 64, Hypro
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
47,500 lbs
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$SOLD USD
General Description
64” GIDDINGS & LEWIS Hypro Vertical Boring Mill, Type 64
Flush floor design, no pit required
Diameter of table 62” Max. swing 67” Max. height under cross rail 55” Ram head vertical travel 32” Turret head vertical slide travel 27” Swivel of ram head ±60º Center line to housing face 15” Bore size in left ram 2 ¾” Bore size in turret 2 ¾” Table top to floor level 30” (16) Table speeds 3.3 to 90 RPM 16 Feeds .003-.500 IPR
EQUIPPED WITH:
T-Slotted table w/ set of (4) faceplate jaws L.H. Swivel ram head with 1 H.P. Dumore grinding spindle and LH10 Sony2-axes D.R.O. R.H. pentagon turret head with manual indexing and LH10 Sony 2-axes D.R.O. Roller table bearings Electric rail clamping Power rapid traverse Pendant control (replaced new 1988) Automatic lubrication (4) Square tool holders (3) Boring bars 50 H.P. 3/60/440 Volt Main drive Motor with control cabinet (replaced new 1988)
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Table working surface 11”x52” Number of t-slots 3 Range: Longitudinal(x) 40” Cross(y) 16” Vertical, knee(z) 18” Quill 5 1/2” (12)Longitudinal & cross feeds 5/8 to 28-3/4 I.P.M. Rapid traverse rate, longitudinal & cross 118 I.P.M. Rapid traverse rate, vertical 1/3 of longitudinal rate Maximum/Minimum distance, 0”-22 3/4” spindle nose to table Maximum/Minimum distance, 27 11/16”- 6 11/16” spindle center to face of column Ram travel, approx. 21 ¼” Turret rotation 360° Head tilt left to right 90° Quill diameter 4 3/8” (3) Power quill feeds 0.0015,0.003,0.005 I.P.R. Infinitely variable spindle speeds, two ranges 85-3800 R.P.M. Spindle taper No.40 N.S.T.
EQUIPPED WITH:
Hardened and ground square ways Power and longitudinal cross feeds Power rapid traverse for longitudinal, cross and knee feeds Swivel; overhead ram Work light Mist coolant Pendant control 3-axes Acu-Rite Quik Count D.R.O. Operator’s control pendant Self-contained coolant system 1 H.P. Vertical feed motor 2 H.P. Table feed motor 5 H.P. 3/60/220-440 Volt AC inverter spindle drive motor and electrical controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6701 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1971 Make - CINCINNATI Model - DL
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6697 , Year = 1971 , Make = CINCINNATI , Model = DL
Category:Universal Mills (Horizontal / Vertical)
Capacity: #410-3814 CINCINNATI Hypowermatic Duplex Mill , Model DL
Ad #6697
Year:
1971
Make:
CINCINNATI
Model:
DL
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
92,000 lbs.
Dimension: L x W x H
36' x 156" x 120"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
#410-3814 CINCINNATI Hypowermatic Duplex Production Rise and Fall Bed Type Production Mill with Fixed Bridge, Model DL
(Built for manufacture and shaving of corrugating rolls)
Table working surface: 38" x 201" Table travel: 168" Max. distance between spindle carriers: 42" Max. height spindle center to table: 32" Min. height spindle center to table: 18" Vertical travel of spindle carriers: 14" Diameter of milling quills: 8-1/2" Adjustment of quills: 6" Width across bed ways: 32-3/4" Width of each bed way: 5" Taper in spindles: No. 50 48-Spindle speeds: 15 to 600 RPM Infinitely variable feed range: 1/2 to 100 IPM Rapid traverse rate: 200 IPM
EQUIPPED WITH:
(2) 10 H.P. milling heads with manual draw bolts Manual quill retraction Manual quill clamping (2) Dynapoise overarms with (5) arbor supports (6) Table dogs Overhead fixed bridge support Full pendant control Electric automatic table cycles Automatic backlash eliminator Power rapid traverse Turcite table liners Hardened and ground bed ways and spindle carrier ways Variable feed attachment with cam follower Table mounted chip paddles for chip removal Tacalemit automatic lubrication system Hydraulic system with oil cooler Coolant system (2) Table mounted indexing fixtures, journal rests, central steady bracket, end stops, and hydraulics for indexing and manufacturing of corrugating rolls. Hydraulic fixtures have capacity of 69-204 indexes in single increments, and between 204-408 indexes in double increments. Maximum swing of indexers 29", large amount of indexing change gears (2) Cambering attachments on spindle carriers which achieves rise and fall of the spindle carrier (2) Shaving attachments (2) Arbors Large amount of milling cutters Set of change gears for spindle speeds
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6697 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 6604 , Year = , Make = Carlton , Model = 5
Category:Horizontal Boring Mills
Capacity: CARLTON CNC FLOOR TYPE BORING MILL
Ad #6604
Year:
Make:
Carlton
Model:
5
Condition:
Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Michigan
Country:
USA
Price:
$sold USD
General Description
CARLTON CNC FLOOR TYPE BORING MILL
SPECIFICATIONS: BAR SIZE........................: 5 " X TRAVEL........................: 195" Y TRAVEL........................: 94" Z TRAVEL........................: 40" W TRAVEL........................: 29" SPINDLE HORSE POWER.............: 25 SPINDLE PRM.....................: 1,000 SPINDLE TAPER...................: NO.50 N.S.T. FLOOR PLATE LENGTH..............: 20'
EQUIPPED WITH :
HARDENED & GROUND BED & COLUMN WAYS POWER DRAW BAR ALLEN BRADLEY 7300 CNC CONTROLS OPERATORS STATION (ELEVATING) RETRACTABLE WAY COVERS AUTOMATIC WAY LUBRICATION COOLANT SYSTEM LIFT UP CHIP CONVEYOR
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 6455 , Year = , Make = LUCAS , Model = 42B60
Category:Horizontal Boring Mills
Capacity: 4´´ LUCAS HORIZONTAL BORING MILL
Ad #6455
Year:
Make:
LUCAS
Model:
42B60
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Ohio
Country:
USA
Price:
$Sold USD
General Description
4´´ LUCAS HORIZONTAL BORING MILL:
DIAMETER OF SPINDLE ...................... 4´´ AREA OF TABLE ............................ 40´´ X 84´´ STROKE OF SPINDLE ........................ 36´´ VERTICAL SPINDLE TRAVEL .................. 48´´ TABLE CROSS TRAVEL ....................... 60´´ MAXIMUM DISTANCE SPINDLE TO OUTBOARD ..... 96´´ SPINDLE SPEEDS ........................... (26) 9 TO 1200 FEEDS .................................... (81) .001 TO 1.038 4 WAY BED MACHINE ........................ YES RAPID TRAVERSE ........................... YES PENDANT CONTROL .......................... YES OUTBOARD SUPPORT ......................... YES MOTOR .................................... 20 HORSEPOWER
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year -Make - GIDDINGS & LEWIS Model - 350-T
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6217 , Year = , Make = GIDDINGS & LEWIS , Model = 350-T
Category:Horizontal Boring Mills
Capacity: 5" #350-T GIDDINGS & LEWIS Table type Horizontal Boring Mill
Ad #6217
Year:
Make:
GIDDINGS & LEWIS
Model:
350-T
Condition:
Very Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
35,000 lbs.
Dimension: L x W x H
232" x 155" x 129"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
5" Table type Horizontal Boring Mill
Main Spindle Specs: Diameter 5" Taper in spindle No.6 M.T. Longitudinal travel 36" Max. distance top of table to spindle center 60" Min, distance top of table to spindle center 4 3/4" 36 Speeds 6.25 to 375 RPM 18 Feeds .005 to .250 IPR Center distance between spindles 8.75"
High Speed Spindle Specs: Diameter 2" Taper in spindle No.4 M.T. Longitudinal travel 9" Max. distance top of table to spindle center 4" 36 Speeds 25 to 1500 RPM 18 Feeds .001 to .062 IPR
Power rapid traverse 2-axes Tri-onics digital readouts 2”Dia. aux. High speed Spindle Scales and verniers 15 H.P. 3/60/220-440 Volt Motor and Controls (all ways have been remachined)
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6217 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1967 Make - GIDDINGS & LEWIS Model - 70-E-4T
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6213 , Year = 1967 , Make = GIDDINGS & LEWIS , Model = 70-E-4T
Category:Horizontal Boring Mills
Capacity: 4" 70-E-4T GIDDINGS & LEWIS Table type Horizontal Boring Mill
Ad #6213
Year:
1967
Make:
GIDDINGS & LEWIS
Model:
70-E-4T
Condition:
Excellent
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
48,000 lbs.
Dimension: L x W x H
180" x 134" x 145.75"
Machine Location:
City:
On Request
State:
Pennsylvania
Country:
USA
Price:
$Sold USD
General Description
4" Table type Horizontal Boring Mill
Diameter of spindle 4" Taper in Spindle No.50 ASA power draw bolt Spindle travel 30" Headstock vertical travel 60" Table working surface 48" x 86" Table cross travel 72" Table longitudinal travel 36" Width across 4-way bed 120" 16 Spindle speeds 6.9-1320 RPM 48 Feeds .0001-.125 IPR 24 Milling feeds .16-140 IPM Rapid traverse rate 140 IPM
EQUIPPED WITH:
Built-in 4-way bed All hardened and ground ways 3-way column No.50 ASA power draw-bar Ball screw spindle feed Full pendant control with joystick Electro/hydraulic clamping 3-axes Numeripoint NC control Lubricool oil cooler (3) Cross slots in table (3) No.50 boring bars (2) No.50 boring heads (7) No.50 holders 10 H.P. feed motor 20 H.P. 3/60/220-440 Volt Spindle Drive Motor
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 6211 , Year = 1954 , Make = LUCAS , Model = 42B-60
Category:Horizontal Boring Mills
Capacity: 4" LUCAS 42B-60 Table type Horizontal Boring Mill
Ad #6211
Year:
1954
Make:
LUCAS
Model:
42B-60
Condition:
Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
41,500 lbs
Dimension: L x W x H
16’2” x 96” x 9’8”
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item
General Description
4" Table type Horizontal Boring Mill
Diameter of spindle 4" Taper in spindle No.50 power lock Spindle traverse 36" Headstock vertical travel 48" Table working surface 40" x 74" Table cross travel 60" Table longitudinal travel with tailstock 51" Table longitudinal travel without tailstock 64" Max. distance, spindle nose to tailstock support bearing 96" 26 Spindle speeds 9-1200 RPM 81 Feeds .0001-1.038 IPR
EQUIPPED WITH: Tailstock (less drive shaft) Simple pendant control Power rapid traverse Power 50 tool-lock with No.40 adapter Scales & verniers 2-axes Mitutoyo digital readouts No.50 taper boring head Built-in 4-way bed (60" width) Coolant tank and pump 20 H.P. 3/60/220-440 volt motor with controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6211 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1974 Make - GIDDINGS&LEWIS FRASER Model - G-130 T
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6215 , Year = 1974 , Make = GIDDINGS&LEWIS FRASER , Model = G-130 T
Category:Horizontal Boring Mills
Capacity: 5" G-130T GIDDING&LEWIS FRASER Table type Horizontal Boring Mill
Ad #6215
Year:
1974
Make:
GIDDINGS&LEWIS FRASER
Model:
G-130 T
Condition:
Very Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
68,500 lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
General Description
5" Table type Horizontal Boring Mill
Diameter of spindle 5.118" Taper in spindle No.50 power draw-bar Spindle travel 36" Headstock vertical travel 72" Table working surface 60" x 98" Table cross travel 84" Table longitudinal travel 60" Bed length 96" Saddle length 156" Saddle width 54" Approx. table load capacity 30,000 lbs. 16 Spindle speeds 5.8 to 1120 RPM 24 Spindle feeds .001-.125 IPR 24 Milling feeds .16-140 IPM Rapid traverse rate 140 IPM Width across 3-way column ways 32"
EQUIPPED WITH: 3-way column In-the-floor auxiliary saddle supports Hardened, replaceable bed and saddle ways (3) Table cross slots Spinlde collet take-up attachment Full pendant control Power rapid traverse Scales & verniers No.50 power draw-bolt
Instantaneous hydraulic speed and feed shifting Power clamping 3-axis Newall Topaz digital readouts Joy-stick control of rapid traverse and milling feed direction Coolant pump Inch/Metric conversion (1)No.50 facing tool (1)No.50 collet holder 10 H.P. feed drive motor 25 H.P. AC spindle drive Motor and controls 3/50/400 volt electrics
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 6197 , Year = 1977 , Make = TOS , Model = SK16
Category:Vertical Boring Mills
Capacity: 70" Mdl. SK16, TOS Vertical boring mill
Ad #6197
Year:
1977
Make:
TOS
Model:
SK16
Condition:
Excellent
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
42,000 lbs.
Dimension: L x W x H
179" x 106" x 186"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
General Description
70" Mdl. SK16, TOS Vertical boring mill
Table diameter 63.78" Maximum swing when turning with side head 66.93" Maximum swing without side head 74.5" Maximum height under cross rail 54.33" Maximum turning height under rail 50.79" Maximum vertical distance, side head toolholder to table 39.37" Vertical travel of cross rail 37.4" Vertical travel of L.H. ram 31.5" Vertical travel of R.H. turret slide 24.8" Horizontal travel of side head ram 24.8" Maximum table load capacity 11,000 lbs. Swivel of L.H. ram head on rail ±45°, -35° Infinitely variable table speeds 3.55 to 150 RPM 24 Feeds .0024 to 0.36 Rapid traverse rate 79 IPM
EQUIPPED WITH:
T-slotted table with set of (4) H.D. faceplate jaws LH swivel type ram head with square toolholder RH pentagon turret head RH side head with square toolholder SCAN-O-MATIC Hydraulic copying attachment mounted on LH ram head Infinitely variable table speeds Pendant control Power rapid traverse, all travels Power rail clamping Scales, all travels Centralized lubrication system (2) Square toolholders for turret 50 HP 3/60/380 volt variable speed commutator main drive motor with controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1975 Make - TITAN Model - SC 1600
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6194 , Year = 1975 , Make = TITAN , Model = SC 1600
Category:Vertical Boring Mills
Capacity: 57" TITAN SC1600 Vertical Boring Mill
Ad #6194
Year:
1975
Make:
TITAN
Model:
SC 1600
Condition:
Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
47,500 lbs.
Dimension: L x W x H
158" x 123.4" x 159.5"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
General Description
57" TITAN SC1600 Vertical Boring Mill
Diameter of table 57" Max. swing without side head 61" Max. swing with side head 61" Max. height of workpiece 47.24" Max. weight of workpiece 17,600 lbs. Max. travel center of R.H. head from table center 31.5" Max. travel center of L.H. head from table center 31.5" Vertical travel of turret head slide 29.92" Vertical traverse of L.H. ram head 39.37" Swivel of rail heads ± 35° Turret tool bore diameter 3.15" Side head vertical travel 43.3" Side head horizontal ram travel 27.56" Vertical traverse of cross rail 39.37" 16 Table speeds 4-200 RPM 16 feeds .00197-.197 IPR Rapid traverse rate to heads 98.5 IPM Rapid traverse rate to cross rail 15.75 IPM Top of table to floor 35.43"
EQUIPPED WITH:
4-jaw chuck with set of (4) hardened top jaws and (2) sets of risers L.H. swivel type ram head on rail with square toolholder R.H. swivel type pentagon turret head on rail with manual indexing R.H. side head with square toolholder and 1-axis Itek digital readout Hydraulic rail clamping Power rapid traverse Motorized rail elevation Threading and taper turning attachment with change gears Full pendant control Motor amp meter Roller table bearings Centralized lub system Scales and verniers Turret tooling including: (8) turret boring bars, (6) square turret toolholders, (8) boring bars, drill holder Misc. tooling 5.5 H.P. rail elevation motor 4 H.P. rapid motors 60 H.P. A.C. main drive motor and controls Height over pendant, 168” height over ram head with rail and head in max. position
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Diameter of table 46?Max. swing 58?Max. height under cross rail 64?Vertical travel of cross rail 54?Vertical ram travel of rail head 51?Max. distance center of table to center of ram 26 ½” Center line of table to face of Bed ways 19?Swivel of ram head ?30?Distance top of table to floor 37?2 ranges of infinitely variable table speeds 27.7-83.2 RPM 111-333 RPM Infinitely variable feed rates .001-.250 IPR Rapid traverse rate 108 IPM
EQUIPPED WITH:
4-jaw chuck with set of hardened top jaws 11?Heavy duty R.H. Swivel type ram head on rail with increased ram travel of 51?T.D.A. attachment for threading, angular turning, drum scoring with approx. (14) change gears Constant cutting speed control Model 270Scan-O-Matic 2-axis hydraulic Tracer attachment with power pak
Power rail clamping Power rapid traverse Hardened, chromed strips on cross rail and ram head slide Centralized pendant control with pistol grip and speed and feed selection Trak 102 2-axis digital readouts Flood coolant system with pan, splash guards and pump (4) ram tool holders (4) ram boring bars 50 H.P. 240 Volt DC, 650/2000 RPM Main Drive Motor; 3:1 constant horsepower and 10:1 constant torque C-600 Westinghouse Variable speed Drive control with regenerative braking with 3/60/230-460 Volt hook-up
Max. height over ram head with everything in max. positions: 205? Floor space required: 122”LR x 166”FB (Machine & Drive) 86”LR x 18”FB x 90”High (Cabinet)
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7322 when Inquiring
Asking Price: $sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1970 Make - CINCINNATI-GILBERT Model -
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7324 , Year = 1970 , Make = CINCINNATI-GILBERT , Model =
Category:Manual Mill, Parts and Accessories
Capacity: 72” x 96” CINCINNATI-GILBERT Air-mist T-Slotted Manual rotary table on
Ad #7324
Year:
1970
Make:
CINCINNATI-GILBERT
Model:
Condition:
Serial #:
On Request
Machine Status:
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 7 % Buyers Premium applies to the final sale price of this item
General Description
72” x 96” CINCINNATI-GILBERT Air-mist T-Slotted Manual rotary table on runway
Working surface of table platen 72” x 96”” Height, table top to floor 44” Horizontal travel on runway 96” Overall length of bed ways 182” Width across bed-ways 45” Height of bed-ways 14” Infinitely variable table feeds on runway .05-105 IPM
EQUIPPED WITH:
3-way bed (8) Pneumatic shot-pin positions Air-mist table lift Operator’s floor pedestal control 5 H.P. AC longitudinal drive motor Reliance solid state variable speed longitudinal table drive control
Dimensions: (table & runway only) 222 ½”L x 48”W x 44”H
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7324 when Inquiring
Asking Price: $Sold
Buyers Premium:A 7 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7323 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7321 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item
General Description
#2E PRATT & WHITNEY Precision Vertical Jig Borer, Model M1890, Rebuilt by CEDA Company Newington, CT 1986
Table working surface 22” x 44” Max. table load 2000 lbs. Table travel, longitudinal 36” Table travel, transverse 22” Maximum, top pf table to spindle (with riser) 37” Minimum, top of table to spindle (with riser) 14” Head travel on column 14” Spindle quill travel 9” Spindle quill diameter 4 5/8” Spindle maximum taper collet No.4 M.T. Spindle center to guide on column 18 ½” Spindle center to column neck 24 ½” Height of column neck above table top 29 ½” Floor to top of table 36” Width bed ways 56” 16 Spindle speeds 40 to 1834 RPM 8 Spindle feeds .0005-.015 IPR Infinitely variable table and carriage feeds 1-15 IPM Table and carriage rigid traverse rate 60 IPM
EQUIPPED WITH: Bed and carriage way covers Lincoln automatic lub. system Power rapid traverse Power adjustment to head 10” removable column riser
16 speed geared head design Operator’s pendant control station Work light RPM Meter Power clamping of head Pre-loaded ball roll quill 2-axes Sony LH10 digital readouts 12” Dia. Cushman power Super- Spacer (horiz. or vertical use) with 16” Dia. T-Slotted faceplate, S/N 10/852/12/000C Approx. (28) tool holders Hi-Speed pneumatic grinding spindle with (3) wheel mounts and Grinding wheels, S/N 1448 3 H.P. 4-speed spindle drive Motor 3/60/220-440 Volt motor with controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7295 when Inquiring
Asking Price: $sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1950 Make - SCHIESS Model - 13 EK125
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7250 , Year = 1950 , Make = SCHIESS , Model = 13 EK125
Category:Vertical Boring Mills
Capacity: 54” SCHIESS Vertical Turret Lathe, Model 13EK125
Ad #7250
Year:
1950
Make:
SCHIESS
Model:
13 EK125
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
30,000 lbs
Dimension: L x W x H
120" x 98" x 148"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
54” SCHIESS Vertical Turret Lathe, Model 13EK125
Diameter of table 47 ¼” Max.swing, with side head below table 55” Max.swing, with side head in position 52” Max.height under cross rail 43” Max.turret head slide travel 28” Max.distance, table to turret face 52” Horizontal travel of side head ram 26” Max.distance between table and bottom of side head ram 32” Vertical travel of cross rail 30” Max.weight of work piece 8,800 lbs. 12 Table speeds 8 to 126 RPM 8 Feeds .004 to .196 IPR Rapid traverse rate 89 IPM Swivel of turret head ±45º
EQUIPPED WITH:
T-slotted table with set of (4) faceplate jaws Swivel type pentagon turret head on rail with (3) toolholders Side head with square toolholder Power rapid traverse Motorized rail elevation Pan and coolant 40 H.P. 3/60/220-440 Volt Motor with controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7250 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1969 Make - LUCAS Model - 542B-120
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7246 , Year = 1969 , Make = LUCAS , Model = 542B-120
Category:Horizontal Boring Mills
Capacity: 5” LUCAS 542B-120 Table Type Horizontal Boring Mill
Ad #7246
Year:
1969
Make:
LUCAS
Model:
542B-120
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
77,500 lbs
Dimension: L x W x H
19' x 18' x 172"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
5” LUCAS 542B-120 Table Type Horizontal Boring Mill Diameter of spindle 5” Taper in spindle No.50 power tool lock Spindle travel 36” Headstock vertical travel 96” Table working surface 48” x 122” Table cross travel 120” Table longitudinal travel 70 3/8” Length of bed ways 122” Width across 4 bed ways 120” Saddle length 216” Spindle speeds 10-1220 RPM 42 Feeds .0001-1.038 IPR Rapid traverse rate 112 IPM
EQUIPPED WITH: Air-lift to table and saddle 10’ length bed All hardened ways Built-in 4-way bed Multiple pendant control with pre-selection Of speeds and feeds Threading attachment with (23) change gears Power rapid traverse 3-axes Mewall DP7 Digital readouts (1) No.50 end mill holder 30 H.P. 3/60/220-440 Volt Motor w/ controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7246 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 7249 , Year = 1958 , Make = KING , Model = 84"
Category:Vertical Boring Mills
Capacity:
Ad #7249
Year:
1958
Make:
KING
Model:
84"
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
74,000 lbs
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
General Description
84” KING Hi-Column Vertical Boring Mill, lot 481
Flush floor design, no pit required Diameter of table 80” Max. swing 84” Max. height under cross-rail 72” Max., height under ram tool holder 70 ½” Max., height under turret face 82” Max. height under turret tool holder 77” Ram travel 72” Turret head slide travel 45” Swivel of ram head ±60º Swivel of turret head ±30º Distance table top to floor level 36” 16 table speeds 3.1 to 100 RPM 24 fine feeds .003-.500 IPR
EQUIPPED WITH:
T-Slotted table with set of (4) H.D. faceplate jaws L.H. Swivel turret head with square tool holder R.H. Swivel type pentagon turret head with manual index and large assortment of tool holders and boring bars Pendant controlled hydraulic speed shifting Motorized rail clamping Fine feeds Power rapid traverse 2-Axes Acu-Rite digital readout on turret head
Timken table spindle bearings 12” extra column height Extra ram and turret head travels Scale and Verniers 50 H.P. 3/60/440 Volt Main Drive Motor and controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1966 Make - CINCINNATI-GILBERT Model - Series C
FOR SALE: Ad # 7245 , Year = 1966 , Make = CINCINNATI-GILBERT , Model = Series C
Category:Horizontal Boring Mills
Capacity: 4” CINCINNATI GILBERT Table Type Horizontal Boring Mill, Series C
Ad #7245
Year:
1966
Make:
CINCINNATI-GILBERT
Model:
Series C
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
46,500 lbs
Dimension: L x W x H
199" x 177" x 183.5"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
General Description
4” CINCINNATI GILBERT Table Type Horizontal Boring Mill, Series C
Diameter of spindle 4” Travel of spindle 30” Taper in spindle No.50 power tool lock Headstock vertical travel 84” Table size 60” x 110 ½” Table cross travel 96” Table longitudinal travel 30” Width of column cross ways 25 ¾” Length of saddle 141” 16 Spindle speeds 8 to 1715 RPM 16 Spindle feeds .0006-.125 IPR (5) Thread leads 8,12,16,24,32 T.P.I. Infinitely variable milling feeds .050-60 IPM
EQUIPPED WITH:
Power 50 tool lock in Spindle Spindle take-up collet Hardened out board table saddle supports Full pendant control with speed and feed selection Scale & Verniers, vertical travel Power rapid traverse Hardened bed and saddle ways Coolant 2-axes Mitutoyo 4DR-220 Digital readouts Bijur Automatic lub. system 15 H.P. 3/60/220-440 Volt Motor and Controls
Tooling Package Includes:
Set of (3) V-Blocks Misc. Set-up and tie-down tooling (14) Quick-change tool holders (2) No. 50 holders w/ shell mill cutters (1) No.50 holder w/ 4” cutter (1) No. 50 holder w/ 5” cutter (1) No.50 face mill cutter (1) No.50 cutter holder (1) No.50 end mill holder
· Note: Bed of machine has 7 ½” riser so that outriggers are flush floor
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1982 Make - SUPERMAX Model - YC-2GS
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7224 , Year = 1982 , Make = SUPERMAX , Model = YC-2GS
Category:Universal Mills (Horizontal / Vertical)
Capacity: YC-2GS SUPERMAX Combination Plain horizontal/ram type vertical mill
Ad #7224
Year:
1982
Make:
SUPERMAX
Model:
YC-2GS
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
5,500lbs
Dimension: L x W x H
115" x 77.25"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
YC-2GS SUPERMAX Combination Plain horizontal/ram type vertical mill
Table working surface 11” x 51 1/8” Range: Longitudinal 39 3/8” Cross 11 ¾” Vertical (knee) 17 ¾” Distance from horizontal spindle center to ram 7” Distance from horizontal spindle center to table 0-17 ¼” Taper in horizontal spindle N.S.T.40 (9) Horizontal spindle speeds 85-1300 RPM Horizontal ram travel 21 ¼” Swivel of ram 360° Distance from vertical spindle nose to table 4 1/8”-21 7/8” Distance from vertical spindle center to column 6 11/16”-27 15/16” Taper in vertical spindle N.S.T.40 Infinitely variable vertical spindle speeds 75-4220 RPM Vertical quill travel 5 ½” Vertical spindle feeds .0015, .003, .005 IPR Vertical head inclined angle 45° R+L (12) Longitudinal and cross-feeds 5/8-27 ½ IPM Longitudinal and cross rapid traverse rate 118 IPM Vertical knee rapid traverse rate 31 ½” IPM
EQUIPPED WITH:
5 H.P. Ram type swivel vertical head Power longitudinal and cross-feeds Power vertical spindle feeds 3-axis Acu-Rite III digital readouts Power rapid traverse Coolant system 5 H.P. horizontal spindle drive motor
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7224 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1997 Make - BRIDGEPORT Model - Series I
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7236 , Year = 1997 , Make = BRIDGEPORT , Model = Series I
Category:Knee Mills (Bridgeport Type)
Capacity: 2 H.P. Series I BRIDGEPORT Vertical Milling Machine
Ad #7236
Year:
1997
Make:
BRIDGEPORT
Model:
Series I
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
2,000 lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$SOLD USD
General Description
2 H.P. Series I BRIDGEPORT Vertical Milling Machine
Table working surface: 9” x 48” Number of T-slots: 3 Range: longitudinal 32 ½” cross 12” vertical, knee 16” quill 5” Maximum/minimum distance, spindle nose to top of table: 18 ½” / 2 ½” Maximum/minimum distance, centerline of spindle to face of column 18 ¾” / 6 ¾” Ram travel: 12” Head tilt, left & right: 90° Head tilt, front to rear, each way: 45° Turret rotation: 360° (3) Power quill feeds: .0015, .003, .006 IPR Infinitely variable spindle speeds, two ranges: 60-4,200 RPM Spindle taper: R-8 Maximum collet capacity: ¾”
EQUIPPED WITH: Chrome ways 9” x 48” Table Bridgeport X-axis power table feed 2-axes Acu-Rite D.R.O. Bijur one-shot lubrication system Work light 2 H.P. 3/60/200/220/440
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1971 Make - CINCINNATI Model - #4
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7228 , Year = 1971 , Make = CINCINNATI , Model = #4
Category:Horizontal Mills
Capacity: #4 CINCINNATI Dial type dual power wide knee plain Horizontal Mill
Ad #7228
Year:
1971
Make:
CINCINNATI
Model:
#4
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
16,400 lbs
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
#4 CINCINNATI Dial type dual power wide knee plain Horizontal Mill
Table working surface 20” x 96” Range: Longitudinal 42” Cross 14” Vertical (knee) 20” Centerline of horizontal spindle to table 20 ¾” Spindle taper No.50 24 Spindle speeds 14-1400 RPM 32 Longitudinal & cross feeds 3/8- 90 IPM 32 Vertical feeds 3/32-22 ½ IPM Power rapid traverse rate longitudinal & cross 150 IPM Power rapid traverse rate vertical 37 ½ IPM
EQUIPPED WITH:
(2) Arbor supports (1)No.50 arbor w/(2) cutters Power rapid traverse Side controls Dynopoise overarm Coolant Front located table longitudinal travel handle Snap Set 2-axes Mech. readout Work light Auto table cycle w/ (2) dogs 5 H.P. feed/rapid motor 50 H.P. 3/60/575 volt motor with controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7228 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1986 Make - BRIDGEPORT Model - Series I
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7239 , Year = 1986 , Make = BRIDGEPORT , Model = Series I
Category:Knee Mills (Bridgeport Type)
Capacity: 2 H.P. Series I BRIDGEPORT Variable Speed Vertical Mill
Ad #7239
Year:
1986
Make:
BRIDGEPORT
Model:
Series I
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
2,200 lbs
Dimension: L x W x H
Machine Location:
City:
On Request
State:
New York
Country:
USA
Price:
$Sold USD
General Description
2 H.P. Series I BRIDGEPORT Variable Speed Vertical Mill
Table working surface 9” x 42” Number of T-Slots 3 Range: Longitudinal 26 ½” Cross 12” Vertical, knee 16” Quill 5” Max./Min.distance, spindle nose to table 25 ½”/9 ½” Max./Min.distance, centerline of spindle to face of column 18 ¾”/6 ¾” Ram travel 12” Head tilt, left to right 90º Head tilt, front to rear, each way 45º Turret rotation 360º (3) power quill feeds .0015, .003, .006 IPR Infinitely variable spindle speeds, two ranges 60-4200 RPM Spindle taper R-8 Max. collet capacity ¾”
EQUIPPED WITH:
Chrome ways 9”x42” table with Bridgeport power feed and rapid traverse Bijur one-shot lubrication Pneumatic power draw-bar 2-axis Acu-Rite III digital readouts Assortment of collets 7” Column riser 2 H.P. 3/60/208/220/440 Volt Motor
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1953 Make - CINCINNATI Model - #5
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7232 , Year = 1953 , Make = CINCINNATI , Model = #5
Category:Universal Mills (Horizontal / Vertical)
Capacity: #5 CINCINNATI Universal Wide-Knee, High Power Mill
Ad #7232
Year:
1953
Make:
CINCINNATI
Model:
#5
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
14,750 lbs.
Dimension: L x W x H
162.5" x 141.75" x 79.625"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
#5 CINCINNATI Universal Wide-Knee, High Power Mill
Table working surface: 20”x 941/2” Range: longitudinal: 50” cross: 14” vertical(knee): 19” Taper in spindle: No.50 Max.height, horiz.spindle center to table top: 19 3/4” 24 Spindle speeds: 14 to 1400 RPM 32 longitudinal and cross feeds: 3/8 to 90 IPM 32 vertical feeds: 3/32 to 221/2 IPM Rapid traverse rate: 150 IPM
EQUIPPED WITH: Universal swivel table Dynapoise overarm (1) arbor support Power rapid traverse Automatic backlash eliminator Dual rear controls (2) table dogs Coolant system (1) No.50 holder with manual draw bar (1) Dividing head with 3-jaw chuck Power speed and feed change 25 HP 3/60/220-440 volt main drive motor with controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7232 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1979 Make - HECKERT Model - FU 400 V/2
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7231 , Year = 1979 , Make = HECKERT , Model = FU 400 V/2
Category:Universal Mills (Horizontal / Vertical)
Capacity: FU 400 V/2 HECKERT Universal Mill with H.D. Vertical Milling Attachmen
Ad #7231
Year:
1979
Make:
HECKERT
Model:
FU 400 V/2
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
10,500 lbs.
Dimension: L x W x H
107" x 68" x 81"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item
General Description
FU 400 V/2 HECKERT Universal Mill with H.D. Vertical Milling Attachment
Table working surface: 16" x 63" Table swivel: + or - 45 degrees
Range: Longitudinal 44" Cross 13.5" Vertical 16"
Taper in both spindles: No. 50 Table load capacity: 3,300 lbs. Spindle speed range: 28 to 1400 RPM Longitudinal and cross feeds: .63 to 31.5 IPM Vertical feeds: .2 to 10 IPM
EQUIPPED WITH:
Swivel table Hardened knee ways 3-Axes automatic cycle control Anti-backlash eliminator Power rapid traverse Pendant control Heavy duty right angle milling attachment with 90 deg. swivel, No. 50 taper, driver and manual draw bar Universal right angle milling attachment with double swivel, No. 40 taper, O.H. arbor support, manual draw bar 12-3/8" Dia. Heckert t-slotted manual or power driven rotary table, graduated in degrees, 5-1/4" overall height Power take-off drive unit for rotary table (2) arbor supports Gear Box for driving dividing head (2) Angle plates (5) No. 50 toolholders (3) No. 50 arbors with spacers (1) 5" Dia. cutter (1) Jacobs drill chuck Work light Coolant system Central lubrication system 15 H.P. spindle drive motor
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7231 when Inquiring
Asking Price: $sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
Table working surface: 19 1/2" x 96" Range: longitudinal: 50" cross: 16" vertical (knee): 21" Maximum height from vertical head spindle nose to table: 21" Taper in both spindle noses: No. 50 24 Spindle speeds: 13 to 1300 RPM 32 Feeds: 3/8 to 90 IPM
EQUIPPED WITH: H.D. double swivel Universal milling attachment with manual Draw bar and driver Mono-Lever and automatic cycle table control w/(9) feed dogs (3) Arbor supports Power rapid traverse Twin elevating screws Front located handle for longitudinal table travel Rear controls Manual horizontal draw bar (2) No. 50 Arbors (1) No. 50 Holder (1) No. 50 Holder with fly cutter Set of "V" blocks Coolant Work light 5 H.P. feed motor 25 H.P. 3/60/208-220-440 Volt motor and controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7229 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1984 Make - BRIDGEPORT Model - Series 1-2 H.P.
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7235 , Year = 1984 , Make = BRIDGEPORT , Model = Series 1-2 H.P.
Category:Knee Mills (Bridgeport Type)
Capacity: Series I - 2 H.P. BRIDGEPORT Variable Speed Vertical Mill
Ad #7235
Year:
1984
Make:
BRIDGEPORT
Model:
Series 1-2 H.P.
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
2,400 lbs.
Dimension: L x W x H
75.5" x 63" x 82.1875"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
Series I - 2 H.P. BRIDGEPORT Variable Speed Vertical Mill
Table working surface: 9" x 42" Table feed: longitudinal: 30" cross: 12" vertical (knee) 16" Spindle travel: 5" Maximum distance spindle nose to table: 22-1/2" Taper in spindle: R-8 Collet capacity: 3/4" Infinitely variable spindle speeds: 60 to 4200 RPM Power spindle feeds: .0015, .003, .006 IPR
EQUIPPED WITH:
Chrome ways 9" x 42" manual feed table Variable spindle speeds 2-axes Heidenhein POS-E-TOUCH II Digital Readouts One-shot lubrication Work light 2 H.P. AC motor
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7235 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1958 Make - CINCINNATI HYDROTEL Model -
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7225 , Year = 1958 , Make = CINCINNATI HYDROTEL , Model =
Category:Horizontal Mills
Capacity: 48” x 168” CINCINNATI Horizontal Hy-dro-tel Milling Machine
Ad #7225
Year:
1958
Make:
CINCINNATI HYDROTEL
Model:
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
111,000 lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
48” x 168” CINCINNATI Horizontal Hy-dro-tel Milling Machine with independent motorized dovetail overarm vertical attachment, new 1959, factory rebuilt 1984
Table working surface: 40” x 191 ½” Table size overall: 52” x 208” Table longitudinal travel: 168” Spindle carrier vertical travel: 72” Maximum height spindle center to table top: 74” minimum: 2” Cross adjustment of spindle carrier: 18” Maximum height center of overarm spindle in horizontal position to table: 92 ¾” Maximum height of face of overarm spindle to table top: 82” Maximum distance horizontal spindle to outer edge of table: 62 1/8” Taper in horizontal spindle: No. 60 with No. 50 adapter Taper in vertical overarm spindle: No. 50 Height table top to floor: 33 ¾” Maximum swivel of vertical overarm spindle: 360° (16) horizontal spindle speeds: 14-1057 RPM (8) vertical overarm spindle speeds: 50-750 RPM Longitudinal and vertical feed range: 0-50 IPM Rapid traverse rate: 120 IPM
Equipped with:
5 H.P. independently motorized vertical overarm attachment with 360° swivel, No. 50 taper, and separate pendant control Motorized movement to overarm attachment Power rapid traverse vertical and longitudinal travels Hand feed controls to table and cross travel of spindle carrier (2) arbor supports Trico oil mist Newall DP-7 3-axes digital readouts Built-in auger type automatic chip conveyor Coolant system Canvas roll-up bed way covers (4) adjustable table dogs Work light Large quantity of set-up and tie-down tooling with steel storage cabinet 20 H.P. 3/60/220-440 volt Racine hydraulic power unit 50 H.P. 3/60/440 volt main drive motor with controls Overall dimensions without overarm attachment: 416 ½”L x 158 ¾”W x 179” High
Overall dimensions with overarm attachment: 416 ½”L x 173 ¾”W x 179”High
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7225 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1950 Make - CINCINNATI Model - #6, Model OD
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7226 , Year = 1950 , Make = CINCINNATI , Model = #6, Model OD
Category:Horizontal Mills
Capacity: #6 CINCINNATI Dual power wide-knee plain Horizontal Mill, Model OD
Ad #7226
Year:
1950
Make:
CINCINNATI
Model:
#6, Model OD
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
16,200 lbs.
Dimension: L x W x H
181.5" x 102.75" x 77.625"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
#6 CINCINNATI Dual power wide-knee plain Horizontal Mill, Model OD, rebuilt by Eastern Machinery approx. 1975
Table working surface 23” x 104 ½” throat : 36.5" length of arbor support travel: Longitudinal 60” Cross 14” Vertical(knee) 20” Taper in spindle No.50 Max. height spindle center to table 20” 14 Spindle speeds 14-1400 RPM 32 Feeds: longitudinal & cross 3/8-90 IPM 32 Vertical feeds 3/32-22 ½” IPM Rapid traverse rate 150 IPM
EQUIPPED WITH: Wide-knee Dynapoise over arm Automatic backlash eliminator (2) arbor supports Rear duplicate controls Speed power and feed changes Auto table cycle Swivel milling vise (6) No.50 arbors with sleeves (2) No.50 holders Misc. cutters was rebuilt at one time 50 H.P. 3/60/220-440 Volt Motor w/controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7226 when Inquiring
Asking Price: $sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
#415-S-15 KEARNEY & TRECKER Plain Horizontal Mill
Table working surface: 15" x 76" Range: Longitudinal: 42" Cross: 14" Vertical (knee): 19" Taper in spindle: No. 50 24 Spindle speeds: 25 to 2000 RPM 32 Feeds: 3/8 to 90 IPM 32 Vertical feeds (knee): 3/16 to 45 IPM Rapid traverse rate: Longitudinal & cross: 150 IPM Vertical: 75 IPM Center of spindle to tabletop: 7/8" minimum & 19 7/8" maximum EQUIPPED WITH: Hardened knee Automatic cycle table control Power rapid traverse Coolant Manual drawbar Pendant control 3 H.P. Feed motor 15 H.P. 3/60/220-440 volt main drive motor with controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7227 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1968 Make - CINCINNATI Model - #415-16
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7233 , Year = 1968 , Make = CINCINNATI , Model = #415-16
Category:Knee Mills (Bridgeport Type)
Capacity: #415-16 CINCINNATI Dial Type Vertical Mill
Ad #7233
Year:
1968
Make:
CINCINNATI
Model:
#415-16
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
11,300 lbs.
Dimension: L x W x H
140.25" x 118"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
#415-16 CINCINNATI Dial Type Vertical Mill
Table working surface: 16 1/4" x 79 3/4" Range: longitudinal: 42" cross: 16" vertical (knee): 16" vertical (head): 6" Max.distance, spindle nose to table: 22 1/8" Taper in spindle No.50 Std. 24 Spindle speeds: 16-1600 RPM 32 longitudinal + cross feeds: 3/8 to 90 IPM 32 vertical feeds (knee): 3/16" to 45 IPM Rapid traverse rate: longitudinal+cross: 150 IPM vertical (knee): 75 IPM
EQUIPPED WITH:
Power rapid traverse 3 H.P. individual feed motor Power feed and rapid traverse to vertical head Turret stop, 4-position with dial indicator Automatic backlash eliminator Coolant system Mist coolant system Manual draw bar (1) toolholder w/cutter Hardened knee ways 15 HP 3/60/230-460 Volt main drive motor and controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7233 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1991 Make - BRIDGEPORT Model - Series I-2 H.P.
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7237 , Year = 1991 , Make = BRIDGEPORT , Model = Series I-2 H.P.
Category:Knee Mills (Bridgeport Type)
Capacity: 2 H.P. Series I BRIDGEPORT Vertical Milling Machine
Ad #7237
Year:
1991
Make:
BRIDGEPORT
Model:
Series I-2 H.P.
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
2,000 lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$SOLD USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
2 H.P. Series I BRIDGEPORT Vertical Milling Machine
Table working surface: 9” x 42” Number of T-slots: 3 Range: longitudinal 26 ½” cross 12” vertical, knee 16” quill 5” Maximum/minimum distance, spindle nose to top of table: 18 ½” / 2 ½” Maximum/minimum distance, centerline of spindle to face of column 18 ¾” / 6 ¾” Ram travel: 12” Head tilt, left & right: 90° Head tilt, front to rear, each way: 45° Turret rotation: 360° (3) Power quill feeds: .0015, .003, .006 IPR Infinitely variable spindle speeds, two ranges: 60-4,200 RPM Spindle taper: R-8 Maximum collet capacity: ¾”
EQUIPPED WITH:
Bridgeport X-axis power table feed Bijur mist coolant Bijur one-shot lubrication system Work light 2 H.P. 3/60/200/220/440
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7237 when Inquiring
Asking Price: $SOLD
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
Power table feeds Power spindle quill feed Front located table longitudinal feed handle 2-axes Acu-Rite Mill-Mate D.R.O. Work light 4 H.P. 3/60/208-220-440 Volt Main Motor w/ controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7238 when Inquiring
Asking Price: $sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
Square box type hardened knee ways Power rapid traverse Backlash compensation for climb milling Arbor support Pendant control (1)No. 40 arbor 3-axes Acu-Rite Quik Count D.R.O. Coolant 5 H.P. 3/60/240 Volt Motor w/ Penta AC variable Speed Drive control
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7230 when Inquiring
Asking Price: $sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 6642 , Year = 1985 , Make = STAR , Model = JNC 16
Category:Swiss Type Automatic
Capacity: JNC 16 STAR CNC Swiss type Automatic Screw Machine w/ bar-feed
Ad #6642
Year:
1985
Make:
STAR
Model:
JNC 16
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
3,450 lbs.
Dimension: L x W x H
72" x 48"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 7 % Buyers Premium applies to the final sale price of this item
General Description
JNC 16 STAR CNC Swiss type Automatic Screw Machine w/ bar-feed
Max. machining diameter .63” Stroke of headstock with fixed bushing .063” Stroke of headstock with Synchronized rotary bushing 3.74” 3 ranges spindle speeds 375-7500 RPM No. of tools: 6 (3 on each opposed tool posts) shifting by .394” possible for 1 each Rapid traverse rate 315 IPM Max. cutting feed rate 236 IPM 3-Spindle end working attachment specs: Drilling capacity .314” Thread cutting capacity M8 X P1.25
EQUIPPED WITH:
Mechanical bar-feed 3-Spindle end working attachment Threading Twin 3-jaw work chucks Twin tool posts Parts separator .4 KW OM X-axis drive .4 KW OM Z-axis drive .4 KW hydraulic motor .18 KW coolant motor 2.2 KW Spindle drive motor 2T-A Fanuc control with RS232 port
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6642 when Inquiring
Asking Price: $Sold
Buyers Premium:A 7 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 6171 , Year = 1996 , Make = STAR , Model = SR-16
Category:Swiss Type Automatic
Capacity: SWISS TYPE CNC LATHE
Ad #6171
Year:
1996
Make:
STAR
Model:
SR-16
Condition:
Very Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Pennsylvania
Country:
USA
Price:
$sold USD
General Description
STAR SR-16 SWISS TYPE CNC LATHE, Model SR-16
MACHINING CAPACITY:
Maximum Turning Diameter 16 mm (5/8") Maximum Head Stock Stroke 205 mm (8") Maximum Drilling Capacity Stationary Tool: 8 mm (5/16") Maximum Drilling Capacity Power Driven Attachment: 5 mm (3/16") Maximum Tapping Capacity Stationary Tool: M8 x Pl.25 Maximum Tapping Capacity Power Driven Attachment: M5 x PO.8 Maximum Milling Capacity 0 mm (3/8") Maximum Die Cutting Capacity M8 x Pl.25 Maximum Slotting Capacity 1.5 mm Width x 4 mm Depth
CONTROL AXIS SPECIFICATIONS:
Rapid Feed Rate - X 12,000 mm/min. Rapid Feed Rate - Y 16,000 mm/min. Rapid Feed Rate - Z 18,000 mm/min. Rapid Feed Rate - XB 18,000 mm/min. Rapid Feed Rate - ZB 18,000 mm/min. Maximum Turning Feed Rate - X 6,000 mm/min. Maximum Turning Feed Rate - Y 6,000 mm/min. Maximum Turning Feed Rate - Z 6,000 mm/min. Maximum Turning Feed Rate - XB 6,000 mm/min. Maximum Turning Feed Rate - ZB 6,000 mm/min. Minimum Input Increment - X .001mm/.0001" (Diameter Value) Minimum Input Increment - Y .001mm/.0001" (Diameter Value)
Spindle Speed 10,000 RPM Speed Control S Code + Direct 5 Digit Command Main Spindle Rotational Control Inverter Control Main Spindle Minimum Indexing Angle 15 Degrees (24 Divisions) Main Spindle Bore 20 mm (49/64")
SUB-SPINDLE SPECIFICATIONS:
Pick-Up Capacity Maximum Chucking Diameter 16 mm (5/8") Maximum Part Length for Front Ejection 80 mm (3-1/8") Maximum Parts Projection Length 30 mm (1-5/32") Distance from Collet End
SPINDLE SPECIFICATIONS:
Spindle Speeds 400 - 6,000 RPM Speed Control S Code + Direct 4 Digit Command Rotational Control Inverter Control Spindle Minimum Indexing Angle 15 Degrees (24 Divisions) Sub Spindle Motor .75 KW / 1.2 KW (30 Min.) Collet Type R16
TOOL POST SPECIFICATIONS:
Type: Gang Tool Post - 2 Axis Control Number of Turning Tools 6 Number of Power Driven Tools 3 Tool Shank Size 12 x 95-120 / 12.7 x 95 - 120
POWER DRIVEN ATTACHMENT:
Spindle Speed 350 - 5,000 RPM Speed Control S Code + Direct 4 Digit Command Rotational Control Inverter Control Motor .4 KW Use Cross Drilling/Milling Spindle
COLLET CHUCK & GUIDE BUSHING:
Main Spindle Collet Chuck Type R16 (Schaublin Type F20, Art No. 87) Stationary Guide Bushing: Standard Version: Type VNC20 (Star Standard Part Equivalent to C16) Revolving Guide Busing: Standard Version: Type R16 (Weukomm Type B Art No. 39.001) C16 Version: Type VNC29 (Star Standard Part Equivalent to C16)
HYDRAULIC UNIT SPECIFICATIONS:
Installation Method Installed Separately Outside Machine Hydraulic Tank Capacity 20 L (5.2 Gallons) Normal Pressure 35 kg/cm² Suitable Hydraulic Oil Viscosity Grade: ISO V632 Recommended Oil Shell Tellus Oil 32 Hydraulic Pump Motor .75 KW
COOLANT UNIT SPECIFICATIONS:
Installation Method Installed Separately Outside Machine Coolant Tank Capacity 100 L (26.4 Gallons) Safety Device Coolant Oil Level Detector Cutting Oil Water Insoluble Cutting Oil Coolant Motor .18 KW
LUBRICATING UNIT SPECIFICATIONS:
Lubrication Part Rectilinear Guide Bearing Portion Oil Ejection Amount 2.5 cc/30 min. Tank Capacity .8 L (.2 Gallons) Safety Device Lubricating Oil Level Detector Pump Motor 3 W Suitable Lubricating Oil Viscosity Grade ISO VG68 Recommended Oil Mobil Vactra Oil No. 2SLC
3 SPINDLE END WORKING ATTACHMENT:
Number of Tools 3 Maximum Drilling Capacity 8 mm (5/16") Maximum Tapping Capacity M8 x Pl.25 Maximum Chucking Diameter ER16 10 mm (.39") Maximum Die Cutting Capacity M8 x Pl.25 Maximum Die Diameter 2.5 mm (.98")
3 SPINDLE UNIT FOR BACK WORKING:
Number of Tools 3 Maximum Drilling Capacity 7 mm (1/4") Maximum Chucking Diameter 10 mm (.39") Maximum Tapping Capacity M6 x Pl.0 Maximum Chucking Diameter ER11 7 mm
EQUIPPED WITH:
Fanuc 16TTA Control Sub-Spindle 15 Degree Indexing Unit with Synchronous Phase Control of Main Spindle and Sub-Spindle Air Blow in Sub-Spindle to Clear Chips Broken/Cut-Off Tool Detector Tool Pre-Setter NSK Air Spindle Milling Heads with 30,000 RPM Air Motors (3) Air Motors LNS Mini-Sprint S2 Barfeed, Serial #46826-96
EQUIPPED WITH: (CONTINUED)
Door Interlock Back Working Attachment Broken Belt Detector for Sub-Spindle Machine Manuals Interior Work Light Cabinet with Assorted Tooling & Collets 3-Spindle Cross Drilling/Milling Unit Parts Ejection Detector Sub-Spindle Digital Tachometer Main Spindle Inner Tube: 11.7 mm Revolving Guide Bushing 2.2 KW (Continuous) Main Spindle Motor
DIMENSIONS:
Main Machine: 84" L-R x 45" F-B x 84" H Barfeed: 184" L-R x 44" F-B x 50" H Tooling Cabinet: 30" L-R x 30" F-B x 34" H Coolant System: 44" L-R x 30" F-B x 17" H
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 2004 Make - KSI Model - SA-32 “Nexturn”
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7444 , Year = 2004 , Make = KSI , Model = SA-32 “Nexturn”
Category:Swiss Type Automatic
Capacity: KSI 7 - Axis CNC Swiss Lathe
Ad #7444
Year:
2004
Make:
KSI
Model:
SA-32 “Nexturn”
Condition:
Excellent
Serial #:
On Request
Machine Status:
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Mid West
Country:
USA
Price:
$Sold USD
General Description
KSI 7 - Axis CNC Swiss Lathe
Bar Capacity MAIN :32mm Max Turning Bar Dia. 210 mm Max Turning Bar Length SUB: 32mm Max Chucking Dia.
Control Fanuc 18iTB
Features/Accessories/Attachments Y Axis Tool Block (adds 3 front working ID Tools) 9 Driven Tools Full Contouring “C” Axis On Main & Sub Spdl. Rigid Tap All Spindles
Low Hours
Comments with: Parts Conveyor Iemca Mini Boss Magazine Bar Feed S/N A05031604 Coolant System Manuals
* 8000 RPM Spindle Speeds Main & Sub Spdl. 1 Deg. / 1000 Spindle Positioning Main & Sub Rapid Traverse: 32M / Min - All Axes
Electrics: Main Spindle: 5.5 / 7.5 KW Sub Spindle: 1.5 / 2.2 KW Cross Drill/Mill Unit Motor: 0.75/1.5 hp Rotary Guide Bushing Unit: 0.75/1.5 hp
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
We found 15 matching ads. Now displaying the remaining 15 ads.
FOR SALE: Year -Make - CARLTON Model -
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6653 , Year = , Make = CARLTON , Model =
Category:Radial Drill Press
Capacity: 8' x 22" CARLTON Radial Drill
Ad #6653
Year:
Make:
CARLTON
Model:
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
44,500 Lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
8' x 22" CARLTON Radial Drill
Arm length: 8' Diameter of column: 22" Maximum spindle radius: 9'3" Minimum spindle radius: 2'6" Max.distance, spindle to base: 98" Min.distance, spindle to base: 20 1/2" Working surface of base: 61"W x 102"L Overall length of base: 170" x 70"W Height of base: 12 1/2" Vertical travel of spindle in head: 24" Spindle diameter: 4" Taper in spindle: No.6MT Traverse of arm on column: 531/2" Traverse of head on arm: 81" 36 spindle speeds: 8 to 800 RPM 18 feeds: .004 to .125 IPR Tap leads: 8,11, 14, 18 TPI
EQUIPPED WITH: (NEW) Spindle installed 2002 281/4" x 321/4" x 24" High, Carlton T-slotted, Tilting box table T-slotted base Power rapid traverse to head Power column clamping Hardened wear strip on arm 25 H.P. 3/60/220-440 Volt Main Drive Motor with controls Max. height over column cap: 13'8" Max. height over head: 14'7"
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6653 when Inquiring
Asking Price: $sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1953 Make - KAUKAUNA Model - 140U
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6654 , Year = 1953 , Make = KAUKAUNA , Model = 140U
Category:Radial Drill Press
Capacity: #140U KAUKAUNA Universal Radial Drill on Bed
Ad #6654
Year:
1953
Make:
KAUKAUNA
Model:
140U
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
60,000 lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item
General Description
#140U KAUKAUNA Universal Radial Drill on Bed
Drilling area 84” x 144” Spindle diameter 4” Drilling capacity 3” Morse taper in spindle nose No. 6MT Spindle travel 18” Column diameter 22” Reach-center on spindle to center of column, spindle vertical 106” Distance center of horizontal spindle to floor max. 163”; min. 79” Distance - nose of vertical spindle to floor max. 108”; min. 6” Horizontal travel - column on runway 144” Traverse rate on runway 80 IPM Vertical travel of head on column 84” Traverse rate on column 80 IPM Traverse of head and rail on rail slide 36” Traverse rate of rail 60 IPM Swivel of head on trunnion 360º Swivel of trunnion on rail 180º Column swivel 360º Height of runway 161/2” Length of runway 18' Width of runway 56” 9-Spindle speeds 35 to 600 RPM 9-Spindle feeds .0035 to .062 IPR
EQUIPPED WITH:
Hardened replaceable bedways 96” Extra column travel on bed 24” Extra vertical travel on column Lifting ear on top of column cap. for portable use Electric clamping of column swivel Power clamping to all movements Power rapid traverse Rack and pinion drives, vertical & horizontal Pendant control 10 H.P. 3/60/220-440 volt, 1740 RPM spindle drive motor w/controls Height over column cap.: 20' 6”
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6654 when Inquiring
Asking Price: $sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 6652 , Year = 1943 , Make = CARLTON , Model =
Category:Radial Drill Press
Capacity: 8' x 19" CARLTON Radial Drill
Ad #6652
Year:
1943
Make:
CARLTON
Model:
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
24,900 Lbs.
Dimension: L x W x H
172" x 51"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
8' x 19" CARLTON Radial Drill
Arm length: 8' Diameter of column: 19" Maximum spindle radius: 9' - 3/4" Minimum spindle radius: 25 1/2" Maximum distance spindle to base: 78" Minimum distance spindle to base: 10" Working surface of base: 48" x 101" Height of base: 10" Vertical travel of spindle in head: 20" Spindle diameter: 4" Taper in spindle: No. 6 M.T. Traverse of arm on column: 48" Traverse of head on arm: 83 1/4" Infinitely variable spindle speeds (with 96 changes): 10 to 1250 RPM 18 Feeds: .004 to .125 IPR Tap leads: 8-11 1/2-14-18
EQUIPPED WITH: T-slotted base Power column clamping Manual clamping of head Hardened wear strip on arm 20 H.P. 230 volt DC motor with solid-state SCR control
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6652 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 6651 , Year = 1956 , Make = CARLTON , Model =
Category:Radial Drill Press
Capacity: 6' x 17" CARLTON Radial Drill
Ad #6651
Year:
1956
Make:
CARLTON
Model:
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
24,150 Lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
6' x 17" CARLTON Radial Drill
Length of arm: 6' Diameter of column 17" Face of column to center of spindle: Maximum: 72" Minimum: 13 1/4" Maximum spindle radius: 85 3/4" Maximum spindle to base: 72" Minimum spindle to base: 14 1/2" Working surface of base: 50" x 77" Height of base: 10" Vertical travel of spindle in head: 20" Spindle diameter: 4" Taper in spindle: No. 6 M.T. Traverse of arm on column: 37 1/2" Traverse head on arm: 58 1/4" 36 Spindle speeds: 15 to 1500 RPM 18 Feeds: .004 - .125 IPR Tap leads: 8-11 1/2 - 14 - 18 T.P.I.
EQUIPPED WITH: T-slotted base with coolant pump 24" x 30" x 20"High, t-slotted box table Power rapid traverse of head Power clamping 20 H.P. 3/60/220-440 volt motor with controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6651 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6649 when Inquiring
Asking Price: $sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1996 Make - NARDINI Model - FRN-60/1600
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6648 , Year = 1996 , Make = NARDINI , Model = FRN-60/1600
Category:Radial Drill Press
Capacity: 5’ x 15” FRN-60/1600 NARDINI Radial Drill
Ad #6648
Year:
1996
Make:
NARDINI
Model:
FRN-60/1600
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
5' x 15" FRN-60/1600 NARDINI Radial Drill
Maximum spindle radius 63" Column diameter 15" Drilling capacity in solid steel 2 3/8" Drilling capacity in cast iron 3 1/8" Boring capacity in steel 3-15/16" Boring capacity, cast iron 4 3/4" Tapping capacity in steel 2 Tapping capacity, cast iron 2 3/4" Spindle diameter 3-9/16" Vertical spindle travel 13 3/4" Taper in spindle No. 5 M.T. Max. height spindle to base 62" Min. height spindle to base 13 3/4" Horizontal travel of head on arm 52 3/8" Working surface of base 35 1/4" x 64" Height of base 8 5/8" Vertical travel of arm on column 34 1/2" 12 spindle speeds 29-1450 RPM 6 feeds .002-.017 IPR
EQUIPPED WITH:
T-slotted base 30" x 30" x 18"High T-slotted box table (slotted top and side Coolant pump in base Coolant splash guard Power column clamping (1) Drill holder Motor amp meter 1 H.P. clamping motor 2 H.P. arm elevation motor 10 H.P. 3/60/200-230-460 volt spindle drive motor Max. height above column: 119 1/2"
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6648 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1981 Make - YAMAZEN Model - TRE-2500D
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7257 , Year = 1981 , Make = YAMAZEN , Model = TRE-2500D
Category:Radial Drill Press
Capacity: 8’2” x 20 7/8” YAMAZEN YMZ Radial Drill Model TRE-2500D
Ad #7257
Year:
1981
Make:
YAMAZEN
Model:
TRE-2500D
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
25,000 lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item
General Description
8’2” x 20 7/8” YAMAZEN YMZ Radial Drill Model TRE-2500D
Arm length 8’2” Column diameter 20 7/8” Taper in spindle No. 5 M.T. Drilling capacity: Solid steel 3 ¾” Cast iron 4 ½” Boring in steel 10 5/8” Boring in cast iron 13 3/8” Diameter of spindle 3 1/8” Diameter of spindle quill 4 ½” Spindle travel 19 5/8” Max. distance, column to spindle center 99 3/16” Min. distance, column to spindle center 16 1/8” Horizontal travel of spindle head on arm 83 1/16” Max. distance, spindle to base 68 7/8” Min. distance, spindle to base 17 ¾” Vertical travel of arm on column 33 15/32” Size of base 47 ¼” x 137 ¾” Height of base 11” 24 Spindle speeds 20-2000 RPM 18 Feeds .0015-.125 IPR Tap leads 8,11 ½,14,18,27 T.P.I.
EQUIPPED WITH:
T-Slotted base 20”x 30”x 19” High T-Slotted box table (3)T-Slots in top, (2) T-Slots in side Power clamping Work light 5 M.T. Quick-Change holder Quick change tool w/drill chuck 5 H.P. arm elevation Motor 15 H.P. Spindle drive Motor
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7257 when Inquiring
Asking Price: $sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1976 Make - WMW HECKERT Model - BR40/2 x 1250
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7255 , Year = 1976 , Make = WMW HECKERT , Model = BR40/2 x 1250
Category:Radial Drill Press
Capacity: 4' x 12" WMW HECKERT Radial Drill, Model BR40/2 x 1250
Ad #7255
Year:
1976
Make:
WMW HECKERT
Model:
BR40/2 x 1250
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
6,600 Lbs.
Dimension: L x W x H
81" x 36.6"
Machine Location:
City:
On Request
State:
New York
Country:
USA
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
4' x 12" WMW HECKERT Radial Drill, Model BR40/2 x 1250
Column diameter 12" Maximum/Minimum distance from face of column 49.2"/11.8" to centerline of spindle Drilling capacity: Steel 1.77" Cast iron 2.36" Tapping capacity: Steel 1.5" Cast iron 2" Horizontal travel of head on arm 37-3/8" Vertical travel of arm on column 29.3" Vertical travel of spindle in head 14" Minimum/Maximum distance, spindle to base 11"/54.3" Size of base 36-1/4" F-B x 80-3/4" L-R Height of base 8-3/4" Spindle taper No.5 M.T. Morse Infinitely variable spindle speeds in three geared 20-1,200 R.P.M ranges for each speed of two speed motor (6) Feeds .0025-.025 I.P.R. Maximum height above spindle drive motor with 121-1/4" the arm at the highest position on column Maximum height above top of elevation motor 112" Maximum height above column cap 96-1/2"
EQUIPPED WITH:
T-slotted base with coolant pump 27-1/2" x 27-1/2" x 19-3/4" High t-slotted (top and side) box table Electro-mechanically actuated clamping of arm on column and head on arm Motorized raising/lowering of arm on column Changeover switch for drilling or tapping operations Hardened steel ways on arm Feed overload clutch Mechanical tool ejector 1/8"-3/4" Capacity JACOBS drill chuck 1 H.P. clamping motor 2 H.P. arm elevation motor 3.5-5.9 H.P. 3/60/440 volt two-speed spindle drive motor and electrical controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7255 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1967 Make - IKEDA Model - RM-1300
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7252 , Year = 1967 , Make = IKEDA , Model = RM-1300
Category:Radial Drill Press
Capacity: IKEDA Radial Drill, Model RM-1300
Ad #7252
Year:
1967
Make:
IKEDA
Model:
RM-1300
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
7,500 lbs
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
IKEDA Radial Drill, Model RM-1300
Capacity #5 M.T. Morse taper Arm length 4’ Column diameter 13” Spindle travel 12” Max. distance column face to spindle 10 ¾” min, 54 ½” max. Max. distance spindle to base 15 7/14” min, 56 ¾” max. 12 Spindle speeds from 30 to 1440 RPM 4 Feeds from .004 to .021 IPR
EQUIPPED WITH:
T-Slotted base Power clamping & power elevation to arm Coolant pump in the base & piping 5 HP Spindle drive motor, 220/440/3/60 Tilting box table: 20”x20” top, 20”x12” side 12” Heavy duty swivel vise Tapping reverse 57”x 36” machined surface of base
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7252 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 7254 , Year = 1990 , Make = JET , Model = JRD-939
Category:Radial Drill Press
Capacity: 3’ x 9 ½” JET Radial Drill, Model JRD-939
Ad #7254
Year:
1990
Make:
JET
Model:
JRD-939
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
3,700 lbs.
Dimension: L x W x H
78" x 43" x 78"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
3’ x 9 ½” JET Radial Drill, Model JRD-939
Column diameter 9 ½” Max. distance, spindle to column 39 3/8” Min. distance, spindle to column 11 ¾” Taper in spindle No.4 M.T. Drilling capacity: Steel 1 9/16” Cast Iron 2 1/16” Tapping capacity: Steel 1” Cast Iron 1 ½” Boring capacity: Steel 3 3/8” Cast Iron 4 ¾” Horizontal travel of head on arm 27” Max. distance, spindle to base 45” Min. distance, spindle to base 13” Vertical traverse of arm 30 ¾” Spindle travel 11” Working surface of base 17 ¾” x 31 ½” 16 Spindle speeds 32-2500 RPM 8 Feeds 0.0031-0.0394 IPR
EQUIPPED WITH:
T-Slotted base 17 ¾” x 23 ¾” x 17 ½” High T-Slotted box table with 6” riser block Electric column clamping
Quick change tool holder Spindle reversing switch Coolant system Work light 1 H.P. arm elevation motor 3 H.P. 3/60/230-460 Volt Motor w/controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7254 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1982 Make - BURGMASTER Model - 2DCP
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7258 , Year = 1982 , Make = BURGMASTER , Model = 2DCP
Category:Multi Spindle Drill Press
Capacity: BURGMASTER Six Spindle Turret Drilling and Tapping Machine, Model2DCP
Ad #7258
Year:
1982
Make:
BURGMASTER
Model:
2DCP
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
2,500 Lbs.
Dimension: L x W x H
48" x 48" x 80"
Machine Location:
City:
On Request
State:
New York
Country:
USA
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
BURGMASTER Six Spindle Turret Drilling and Tapping Machine, Model2DCP
Drilling capacity, mild steel 3/4" Tapping capacity, mild steel 3/4" N.F. Turret travel 8" Table size 24" x 40" Throat depth 11-1/2" (12) Preselective spindle speeds, three ranges 225-3,000 R.P.M. Carriage travel 15" Work height, spindle nose to table, head up 9" carriage down Work height, spindle nose to table, head up 24" carriage up Feed, infinitely variable and preselective for each 1-45 I.P.M. spindle Rapid traverse, pre-selective in length for each 195 I.P.M. spindle Depth control, pre-selective in length for each plus or minus .002" spindle
EQUIPPED WITH: Electric feed system: Manual by fast or or slow Jog Control, Semi-Automatic, orFully Automatic Spindle Cycle Selector: allows complete automatic cycling. Each of the six spindles can be programmed individually by the flick of the assigned thumbwheel. Rapid approach points are adjustable through a cam setting. Automatic retraction at the end of the machining operation (drilling, reaming, dwell for counterboring, and boring). The turret then indexes bringing the tool into the new position. The slide rapid traverses down to the new feed engagement point andthe new preselected machining operation occurs. Spindle Function Selector is also programmed by thumbwheel. It provides the Cycle Stop mode-that is, stopping the automatic cycle operation on a given spindle at the conclusion of the spindle's preassigned cycle and also preselects the motor speed. Key lock selector switch for Indexer Auto Enable Rheastat for Reciprocating Feed (peck drill) (6) 1/32"-1/2" Capacity ALBRECHT keyless drill chucks External coolant pump and tank 2-1 H.P. 3/60/220-440 volt two-speed drive motor coupled to a two step belt drive and electrical controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7258 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1993 Make - PITTLER WITZIG & FRANK Model - LEO23AS
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7253 , Year = 1993 , Make = PITTLER WITZIG & FRANK , Model = LEO23AS
Category:Radial Drill Press
Capacity: 3' PITTLER Witzig & Frank Radial arm drill with table, type LEO32AS
Ad #7253
Year:
1993
Make:
PITTLER WITZIG & FRANK
Model:
LEO23AS
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
3,700 lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
3' PITTLER Witzig & Frank Radial arm drill with production table, type LEO32AS
Throat: 36" Horizontal movement of ram: 28" Vertical arm movement: 16" Taper in spindle: No.4 M.T. Spindle speeds to 2360 RPM Working surface of production table 16 3/4" x 54"
EQUIPPED WITH:
Power vertical adjustment of arm T-slotted production table Manual spindle feed Power clamping Work light 11/2 /3 H.P. Main Drive Motor 5.36 total connected H.P.
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7253 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1941 Make - AMERICAN HOLE WIZARD Model -
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7256 , Year = 1941 , Make = AMERICAN HOLE WIZARD , Model =
Category:Radial Drill Press
Capacity: 5’ x 15” AMERICAN “HOLE-WIZARD” Radial Drill
Ad #7256
Year:
1941
Make:
AMERICAN HOLE WIZARD
Model:
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
19,250 lbs
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
5’ x 15” AMERICAN “HOLE-WIZARD” Radial Drill
Arm length 5’ Column diameter 15” Taper in spindle No.5 M.T. Max. distance, spindle to base 66” Min. distance, spindle to base 6” Spindle travel 18” 32 Spindle speeds 15-1200 RPM 16 Feeds .003-.125 IPR Tap leads 8-11 ½-14-18 T.P.I. Horizontal travel of head on arm 46 ¾” Vertical travel of arm on column 42” Height of base 9” Size of Rt. Angle base 42”W x 61”L
EQUIPPED WITH:
T-Slotted right angle base 36”x36”x20 ½” High, T-Slotted box table 28”x28”x20 3/8” High, T-Slotted box table Power clamping Coolant pump in base Motorized elevation 10 HP 3/60/220-440 Volt Motor and controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7256 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1965 Make - DEKA Model - HRG-1222-18
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7251 , Year = 1965 , Make = DEKA , Model = HRG-1222-18
Category:Multi Spindle Drill Press
Capacity: 16-Spindle Model HRG-1222-18 DEKA Multiple Spindle Hydraulic Drilling
Ad #7251
Year:
1965
Make:
DEKA
Model:
HRG-1222-18
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
4,600 lbs.
Dimension: L x W x H
58" x 46" x 124"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
16-Spindle Model HRG-1222-18 DEKA Multiple Spindle Hydraulic Drilling and Tapping Machine
Drilling cap. mild steel: (18-spindles) - 13/32" (10-spindles) - 5/8" (5-spindles) - 7/8" Cast iron: (18-spindles) - 1/2" (10-spindles) - 25/32" (5-spindles) - 15/16" Tapping cap. mild steel: (18-spindles) - 3/8" - 24 N.F. (12-spindles) - 9/16" - 18 N.F. (6-spindles) - 1" - 14 N.F. Cast iron: (18-spindles) - 1/2" - 13 N.C. (10-spindles) - 3/8" - 11 N.C. (7-spindles) - 7/8" - 9 N.C. Feed stroke of table: 6" Max. distance, head flange to table: 40" (with 12" riser) Min. distance, head flange to table: 26" (with 12" riser) Opening of head: 14-1/2"FB x 22-3/4"LR Center of head to face of ways on column: 12" Number of spindle drives: 18 Working surface of table: 19-3/4"FB x 29-1/2"LR Standard feeding stroke: 6" Max. feeding pressure: 9000 lbs. Feed range: 0 to 90 IPM Rapid traverse rate: 120 IPM 12-Spindle speeds: 174 to 1562 RPM Size of hexagon drives: 9/16"
EQUIPPED WITH:
Drill cluster box 12" Column riser for extra work height Hydraulic feed of table Drill, tap and dwell cycle (16) Slip type spindles Dual palm buttons 3 H.P. 3/60/208-220-440 volt hydraulic system 10 H.P. 3/60/208-220-440 volt, 880 RPM spindle drive motor with controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7251 when Inquiring
Asking Price: $sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6972 when Inquiring
Asking Price: $SOLD
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 6974 , Year = 1992 , Make = AMADA , Model = H-2000
Category:Horizontal Band Saws
Capacity: USED AMADA MODEL H-2000, LARGE CAPACITY HORIZONTAL BANDSAW
Ad #6974
Year:
1992
Make:
AMADA
Model:
H-2000
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
53 TONS
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Texas
Country:
USA
Price:
$Sold USD
General Description
USED AMADA MODEL H-2000, LARGE CAPACITY HORIZONTAL BANDSAW
MAX, CUTTING CAPACITY: 2000 X 2000MM (78.74" SQUARE) SIDE CUTTING CAPACITY: 2000 X 400MM (78.4 X 14.74") BLADE SIZE: 120MM WIDE X 1.6MM THICK, X 1700MMM LONG (4.72" X .06" X 669") TABLE SIZE: 2000 X 5000 MM (78.74 X 196.85") TABLE TRAVEL: 4500MM (177.165") TABLE FEED RANGE: 30-2000 MM/MINUTE (1.18 X 78.74" /MINUTE) MAX. WORKTABLE WEIGHT CAP: 100 TON SAW BLADE DRIVE MOTOR: 15 HP HYDRAULIC DRIVE MOTOR: 7.5 HP COOLANT MOTOR: 0.5 HP APPROX. SIZE: 6840 H X 8370 W X 11100 L MM (22.44' X 27.46' X 36.42') ESTIMATED FLOOR SPACE REQUIRED: 11000 X 12700MM (36.08' X 41.67')
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1987 Make - AMADA Model - HFA400S
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6939 , Year = 1987 , Make = AMADA , Model = HFA400S
Category:Horizontal Band Saws
Capacity: AMADA MODEL HFA400S AUTOMATIC HORIZONTAL BAND SAW
Ad #6939
Year:
1987
Make:
AMADA
Model:
HFA400S
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
6,500 lbs.
Dimension: L x W x H
120" x 90" x 70"
Machine Location:
City:
On Request
State:
Illinois
Country:
USA
Price:
$Sold USD
Buyers Premium: A 7 % Buyers Premium applies to the final sale price of this item
General Description
AMADA MODEL HFA400S AUTOMATIC HORIZONTAL BAND SAW
Capacity: 16" x 16" (Rectangular) 16.14" (Rounds) Load Capacity: 5733 Lbs Blade Length: 16'5" Blade Width/Gauge: 1-1/2" x .05" Blade Speeds (Variable): 50 - 393 FPM Feed Length (Variable): .394" - 99.999" Maximum Number of Pieces to be Cut: 999 per Station Table Height from Floor: 25-1/2"
EQUIPPED WITH:
99 Station Micro-Processor Back Gauge Blade Breakage and Slip Detection Automatic Bar Feed Hydraulic Clamps Variable Feed and Speed Control Automatic Hydraulic Screw Type Chip Conveyor Coolant System 1/4 HP AC Coolant Pump Motor 5 HP AC Main Drive Motor 2 HP AC Hydraulic Pump Motor Electrical Controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6939 when Inquiring
Asking Price: $Sold
Buyers Premium:A 7 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1995 Make - MARVEL Model - 81A11PC
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6940 , Year = 1995 , Make = MARVEL , Model = 81A11PC
Category:Tilt Frame Vertical Band Saw
Capacity: MARVEL MODEL 81A11PC VERTICAL BAND SAW
Ad #6940
Year:
1995
Make:
MARVEL
Model:
81A11PC
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
12,000 lbs.
Dimension: L x W x H
320" x 96" x 90"
Machine Location:
City:
On Request
State:
Illinois
Country:
USA
Price:
$Sold USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
MARVEL MODEL 81A11PC VERTICAL BAND SAW
Capacities: 18" x 20" (Maximum @ 90 Degrees) 18" x 11-1/2" - 45 Degree Left Tilt 18" x 13-1/2" - 45 Degree Right Tilt 18" Round Maximum Wise Opening: 21-1/2" Blade Speed (Hydraulically Variable): 60 - 400 FPM Blade Length/Width/Gauge: 14'6" x 1-1/4" x .042" Feed Pressure (Hydraulically Variable): 0 - 300 Lbs. Maximum Feed Length: 24" (Single Index) 216" (Multiple) Maximum Shuttle Table Load Capacity: 14,000 Lbs.
EQUIPPED WITH:
Programmable Control 10' Automatic Shuttle Type Bar Feed Hydraulic Lift Rollers Automatic Hydraulic Blade Tension; Hydraulic Vises Coolant System, Chip Conveyor 10 HP AC Main (Pump) Drive Motor 10' Exit Roller Table Electrical Controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6940 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 6914 , Year = , Make = WF Wells , Model = F15
Category:Horizontal Band Saws
Capacity: WF Wells, Twin Post Band Saw, 15" x 16", No. F15, Hyd. Down Feed
Ad #6914
Year:
Make:
WF Wells
Model:
F15
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Michigan
Country:
USA
Price:
$Sold USD
General Description
WF Wells, Twin Post Band Saw, 15" x 16", No. F15, Hyd. Down Feed
SPECIFICATIONS:
Capacity: 15" X 16" Weight Capacity: 12,000 LBS. Blade Size: 1-1/4" X .042" X 14'5" Blade Speed (variable): 65 TO 390 FPM Stroke Length: 1/8" TO 24", or 3 strokes to 72" Sawing Force: 0 TO 300 Lbs. Saw Head Cycle Time, Raise: 17" in 4 sec. SAW Head Cycle Time, Lower: 17" in 4 sec. Hydraulic Pump Motor: 2 hp A.C. Blade Drive Motor: 5 hp
EQUIPPED WITH:
Automatic Cycle ((2 Hydraulic Vise)) ((2 Hydraulic Hold Down Vises (For Bundling))) Hydraulic Rise and Fall Hydraulic Blade Tensioning Coolant Pump 10' Infeed Table Chip Pan Control Console
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Buyers Premium: A 7 % Buyers Premium applies to the final sale price of this item
General Description
21.7" KALTENBACH Non-Ferrous Automatic Circular Cold Saw, Model RKL550 AX
Cutting capacity at 90 degrees: Rounds 6.5" Squares 6.1" Profiles 15.3" x 1.2" Blade diameters 17.7", 19.7", 21.7" Cutting speed with 21.7" diameter blade 16,320 S.F.M. Blade feed rate, infinitely variable 0-86.6 I.P.M. Rapid return of saw blade 236.2 I.P.M. Saw blade type Carbide metal Cut-off lengths from .39" to 78.7"
EQUIPPED WITH:
Model S5 SIEMENS PLC control of cutting lengths and quantities Ball screw driven length stop nut Carriage driven by chain and motor Fine adjustment of cutting length by hand wheel and digital display Counter for preselecting the required number of cut-offs Infinitely variable and hydraulically actuated upward saw blade feed with rapid return Contact free return stroke (automatic enlargement of cutting gap) Vertical vise used to clamp work piece on both sides of the saw blade Short stroke vise with hand crank for preadjustment Sound proofed cabin around the complete machine area Infeed and outfeed tables Chip exhaust system Accu-Lube spraymist coolant Miscellaneous spare parts including rebuilt drive motor Approximately (20) miscellaneous saw blades 8 H.P. direct drive motor and electrical controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6711 when Inquiring
Asking Price: $Sold
Buyers Premium:A 7 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6547 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6039 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7647 when Inquiring
Asking Price: $sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7260 , Year = 1975 , Make = MARVEL , Model = No. 8
Category:Tilt Frame Vertical Band Saw
Capacity: MARVEL All Mechanical, Universal Vertical Band Saw, Model No. 8
Ad #7260
Year:
1975
Make:
MARVEL
Model:
No. 8
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
2,475 Lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
New Jersey
Country:
USA
Price:
$sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
MARVEL All Mechanical, Universal Vertical Band Saw, Model No. 8
Capacity: Nominal 18" x 18" Maximum 18" x 22-1/2"
blade at 45 degrees nominal 18" x 12-1/2" blade at 45 degrees maximum 18" x 14" Number of t-slots in table (size) 4 (3/4") Table working surface 33" x 24-1/4" Table height 32-1/2" Blade length 14' 8" Blade width/gauge 3/4" x .032 Maximum vise opening 21" Height of vise jaws 6" (6) Blade speeds 40 to 200 F.P.M.
EQUIPPED WITH:
Manually operated tilt column and blade up to 45 degrees left and right of vertical for miter cutting Built-in tilt protractor for setting column at desired angle T-slotted work table with quick-acting vise Stops to limit both forward and return travel of the column and blade Automatic blade tensioning Self-contained coolant system with pan 1.5-.75 H.P. 3/60/230 volt, 850/1,765 R.P.M. two speed drive motor with push button electrical controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7260 when Inquiring
Asking Price: $sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 7261 , Year = 1978 , Make = MARVEL , Model = 8/MGI
Category:Tilt Frame Vertical Band Saw
Capacity: 18”x 20” No. 8 MARVEL Hi-Column Tilt Frame Vertical Band Saw, Model 8/
Ad #7261
Year:
1978
Make:
MARVEL
Model:
8/MGI
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
2,600 lbs.
Dimension: L x W x H
85" x 46.75" x 90"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
18”x 20” No. 8 MARVEL Hi-Column Tilt Frame Vertical Band Saw, Model 8/MGI
Capacity: Nominal 18” x 23 ½” Maximum 18” x 28” Blade at 45° Nominal 18” x 16 ½” Blade at 45° Maximum 18” x 18” Table working surface 33” x 24 ¼” Table height 32 ½” Tee slots-No. and size 4- ¾” Maximum vise opening 21” Height of vise jaws 6” 6 Blade speeds 40-200 FPM
EQUIPPED WITH:
(1) Work vise Coolant pan 1 ½ / ¾ H.P. 3/60/230 volt main drive motor with controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7261 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6877 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1960 Make - THOMPSON Model - Model C
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6685 , Year = 1960 , Make = THOMPSON , Model = Model C
Category:Surface Grinders
Capacity: 24” x 28” x 72” THOMPSON Hydraulic surface grinder, Model C
Ad #6685
Year:
1960
Make:
THOMPSON
Model:
Model C
Condition:
Good
Serial #:
On Request
Machine Status:
Can be powered up
Shipping Info:
We can load
Weight:
27,500 lbs
Dimension: L x W x H
203" x 83" x 107"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item
General Description
24” x 28” x 72” THOMPSON Hydraulic surface grinder, Model C
Capacity 24” x 72”chuck size no incremental downfeed Max. height above table with new wheel 28” Wheel size 20”x6”x12” Table speed range 10-100 FPM Hydraulic cross feed 1/32” to half wheel width
EQUIPPED WITH:
24” x 72” Electromagnetic chuck with neutrofier control 12” extra column height Wheel dresser (1) wheel mount Automatic lubrication Rapid traverse to wheel head Splash guards Coolant system Hydraulic power unit 15 H.P. 3/60/220-440 volt spindle drive motor with controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6685 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1967 Make - ELB Model - SWD 20 VA II-U
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6687 , Year = 1967 , Make = ELB , Model = SWD 20 VA II-U
Category:Surface Grinders
Capacity: 29” x 79” ELB High Precision Surface Grinder, Model SWD VA II-U
Ad #6687
Year:
1967
Make:
ELB
Model:
SWD 20 VA II-U
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
43,000 lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
New Jersey
Country:
USA
Price:
$Sold USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
29” x 79” ELB High Precision Surface Grinder with Auto. Incremental Downfeed and Way Grinding Attachment, Model SWD 20 VA II-U
Width & Length ground 29” x 79” Height under new 20” wheel 30” Longitudinal table speed 4' to 98' FPM Maximum cross travel 28” Auto. cross feed increment per table pass 0.04” to 2.4” Power rapid traverse rate 47” IPM Cross feed handwheel, grad. 0.0001” Automatic vertical downfeed 0.0001” to .0025” Power rapid vertical traverse 6” IPM Grinding wheel, dia. x width x bore 20” x 4” x 8” Spindle motor 22 KW Way grinding wheel 8” x 2” x 3”
EQUIPPED WITH:
Saddle type, heavy duty design Independent way grinding attachment Automatic incremental downfeed Power rapid wheelhead positioning Electro-mechanical power table drive with infinitely variable electronic speed control Column moves for cross feed movement “Hoglund” power over-the-wheel dresser (4) Electro-magnetic chucks providing 29” x 79” (total) with neutrofier control Coolant system with magnetic separation
*Parts and service are available from Elb Grinders of Mountainside, NJ Phone No. (908) 232-6330
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6687 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1968 Make - CAMUT Model - TR3000M
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6686 , Year = 1968 , Make = CAMUT , Model = TR3000M
Category:3 Axis Fully Automatic Surface Grinder
Capacity: 31.5"x39.4"x144" CAMUT Hi-column hyd surface grinder, Model TR-2-3000M
Ad #6686
Year:
1968
Make:
CAMUT
Model:
TR3000M
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
70,000 lbs.
Dimension: L x W x H
30' 6" x 150" x 168"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
31.5" x 39.4" x 144" CAMUT Hi-column hydraulic surface grinder with automatic downfeed, Model TR- 2-3000M
Table working surface 27.56" x 148" Maximum table travel 145.7" Maximum height table to new 22" dia. wheel 39.37" Maximum height table to new 15" dia. wheel 42.91" Wheel cross travel 31.5" Maximum wheel size 22" dia. x 6"W x 8" hole Variable table speeds 3.94-98 FPM Automatic cross feed rates .12" to 3" Automatic downfeed rates (10 steps) .0002"-.002" Wheel speed 1152 RPM
EQUIPPED WITH:
Automatic downfeed of wheel (10 steps) Full hydraulic operation Automatic vertical downfeed may be programmed with wheel cross reversal or table reversal (single or double) (3) 27 1/2" x 39 5/8" EMC electromagnetic chucks in series with variable control Head mounted hydraulic wheel dressing with 12" stroke and variable control Wheel arbor balancing stand Rapid traverse to wheelhead Marposs electronic sizing (vertical movement) Auto. central lubrication system Hardened Vee-type bed ways (4) wheel mounts with grinding wheels Way covers EXL200 Casven coolant separator (1200 liter cap.) 15 H.P. Vichers dual delivery pump system 50 H.P. wheel drive motor
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6686 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1991 Make - CHEVALIER Model - FSG 1640 AD
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6682 , Year = 1991 , Make = CHEVALIER , Model = FSG 1640 AD
Category:Surface Grinders
Capacity: 16” x 40” FSG 1640 AD CHEVALIER 3-axis Hydraulic Surface Grinder
Ad #6682
Year:
1991
Make:
CHEVALIER
Model:
FSG 1640 AD
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
8000 lbs
Dimension: L x W x H
158" x 68" x 76"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item
General Description
16” x 40” FSG 1640 AD CHEVALIER 3-axis Hydraulic Surface Grinder
Table size 15 ¾” x 39 3/8” Max. grinding length 40” Max. grinding width 16” Max. distance from table to spindle center line 24 3/8” Table longitudinal travel(hydraulic) 41 5/16” Table longitudinal travel(manual) 43 ¼” Table speed, infinitely variable 16-82 FPM Rapid traverse cross travel 12 FPM Automatic cross travel increment 1/8”-2” Max. automatic cross travel 16” Max. manual cross travel 18” Cross travel hand wheel per revolution 0.25” Hand wheel per graduation 0.0025” Micro cross feed per revolution 0.005” Micro cross feed per graduation 0.00005” Automatic down feed of wheel 0.00005”-0.002” Vertical hand wheel feed per revolution 0.05” Vertical hand wheel feed per graduation 0.0005” Vertical micro feed 0.00005”/0.0001” Vertical rapid traverse rate 8 FPM Standard wheel size 14”x2”x5”
EQUIPPED WITH:
15 ¾” x 39 3/8” electromagnetic chuck Over-the-wheel dresser 1-axis Sokki Digital readout Work light Wheel mount w/wheel Hydraulic unit Magnetic coolant Separator 5 H.P. GPD503 Magnetek AC inverter spindle drive
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6682 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1997 Make - KENT Model - KGS-63SD1
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6681 , Year = 1997 , Make = KENT , Model = KGS-63SD1
Category:Surface Grinders
Capacity: 12" x 24" KENT Hydraulic Surface Grinder, Model KGS-63SD1
Ad #6681
Year:
1997
Make:
KENT
Model:
KGS-63SD1
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
4,000 Lbs.
Dimension: L x W x H
148" x 100"
Machine Location:
City:
On Request
State:
New York
Country:
USA
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
12" x 24" KENT Hydraulic Surface Grinder, Model KGS-63SD1
Capacity:
Overall table working area (width x length) 11.81" x 25.59" Longitudinal table travel 27.95" Cross table travel 13.39" Maximum table load (with chuck) 550 Lbs. Maximum/Minimum distance between working table 21.25"/4.72" and spindle center
Table Cross Feed:
Longitudinal table speed 8 to 100 F.P.M. Cross feed hand wheel is graduated in increments of .0001" Automatic cross feed per stroke of table .02" to .4"
Grinding Wheel:
Standard wheel dimensions 14" diameter x 1.5" maximum Width x 5" bore Spindle speed 1,740 R.P.M.
Downfeed:
Automatic down feed increment 0.0001" to .004" Downfeed hand wheel is graduated in increments of .0001" Downfeed travel per revolution of hand wheel .02"
EQUIPPED WITH:
Hydraulically actuated longitudinal feed Electromechanically actuated cross feed Automatic incremental downfeed of grinding wheel head driven by stepping motor Programmable logic controller (PLC) of all machine functions including: "Rough Downfeed" increment and number of passes, "Fine Downfeed" increment and number of passes, "Sparkout" times, "Downfeed Mode" for control of incremental downfeed with table at right end of stroke, left end of stroke, or both left and right end of stroke, "Wheel head Elevation & Position" for control of elevation increment at completion of grinding job, "Jog" increment to allow the operator to select three different jog rates of the grinding wheel head, and "Reset" to set the current position of the grinding wheel as 0 point The PLC has a LED display to show the position of the grinding wheel in relation to the starting point. Selector switch for surface or plunge grinding modes of operation Selector switch for automatic incremental downfeed, downward jogging, or power rapid elevation of grinding wheel head 12" x 23-5/8" Fine division electromagntetic chuck with console mounted controls including: variable magnetic strength, magnetization/demagnetization mode selector, and voltage gauge meter Over-the-wheel parallel dresser External hydraulic pump and tank External coolant pump and tank with paper band filtration 5 H.P. 3/60/575 volt spindle drive motor
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6681 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1980 Make - BLOHM Model - HFS-512
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6684 , Year = 1980 , Make = BLOHM , Model = HFS-512
Category:Surface Grinders
Capacity: 22" x 48" BLOHM Hydraulic Surface Grinder Model HFS-512
Ad #6684
Year:
1980
Make:
BLOHM
Model:
HFS-512
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
15,200 lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$SOLD USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
22" x 48" BLOHM Hydraulic Surface Grinding Machine with Automatic Incremental Downfeed, model HFS-512
Clamping surface of table: 20" x 75" Maximum grinding length: 48" Maximum grinding width: 22" Maximum distance from table to centerline of spindle: 30 1/2" Height of table from floor: 42 1/4" Maximum table load with magnetic chuck: 2,618 lbs. Cross traverse of table: 20" Longitudinal traverse of table hydraulically actuated: 55 1/2" Automatic cross feed, electrically actuated: .08" to 2-9/16" per stroke of table Automatic incremental downfeed rate adjustable from: 0.00005" to 0.001" Vertical feed handwheel graduation reads to: .0005" Cross feed handwheel graduation reads to: .001" Fine cross feed handwheel reads to: .00005" Table speed, longitudinal: 6 1/2 to 98 FPM Standard grinding wheel size: 14" diameter x 3 1/8" width Maximum grinding wheel size: 16" diameter x 4" width Bore of grinding wheel for 16" diameter wheel: 5"
* German built. Parts are available from: United Grinding Technologies Inc. 510 Earl Blvd. Miamisburg, OH 45342 Tel: 937-859-1975 Fax: 937-859-1115
Equipped with:
Hydraulically actuated longitudinal table travel Electromechanically actuated saddle travel Ball bearing assemblies for both table and saddle "Finimatic" automatic incremental downfeed for both surface and plunge grinding modes with spark out timer set at 0 to 7 passes after pre-set size is reached. Hydraulic and table stop after spark-out strokes have been finished. Simultaneously grinding head is lifted. Amount of lifting can be set at control console. Operator's control station mounted on swing-arm console Motorized power rapid traverse to grinding wheel head 20" x 47 3/4" electromagnetic chuck with Neutrofier control External hydraulic pump and tank External coolant pump and tank Operation and parts manual 15 H.P. spindle drive motor and electrical controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6684 when Inquiring
Asking Price: $SOLD
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
Max. swing over bed 13.78” Max. grinding length 59” Max. grinding O.D. 13” Max. work piece weight 350lbs. Work head variable speed range 11-500 RPM Work head swivel 90° CCW, 30° CW(total 120°) Work head spindle center No.4 M.T. Spindle rotation Dead and live spindle Table speed 2-118 IPM Table hand wheel per revolution 0.78” Table swivel angle 5° CCW, 2° CW Table minimum traverse length 0.3” Wheel head maximum swivel 30° CCW, 30° CW Grinding wheel size 16”x1-3/4”x5” Grinding wheel speeds 1499,1600 RPM Max. periphery speed 6500 SFPM Infeed travel 7.5” Rapid advance and retraction of wheel heal 1.57” Max. grinding wheel travel 5.98” Infeed hand wheel per revolution 0.039” Max. automatic infeed travel 0.029” Traverse grinding auto. increment: Rough 0.0002”-0.0016 Finish 0.0001”-0.0002” Plunge grinding auto. increment: Rough 0.0004-0.060 IPM Finish 0.00004-0.0004 IPM Tailstock quill travel 1.18” Tailstock center size No.4 M.T.
EQUIPPED WITH:
Hydraulic operation 1 H.P. Swing-down internal grinding attachment w/spindle Plunge feed with spark-out Variable speed work head Hydrodynamic spindle bearings Left and right table tarry Swivel table with indicator Swivel work head Swivel wheel head Angular dressing attachment Table mounted wheel dresser (2) work rests 3-point plain steady rest Drive plate Hardinge 5C collet chuck (6) Wheel mounts with wheels Wheel balancing stand w/arbor Paper coolant separator 5 H.P. wheel drive Coolant system Work light 2-axis Newall C-80 D.R.O. Hydraulic unit
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6689 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
10" x 48"cc CINCINNATI-MILACRON Universal Hydraulic Cylindrical Grinder with Internal Grinding Attachment
Maximum swing over table: 10-15/16" Swivel table graduated to an angle: toward wheelhead: 9º away from wheelhead: 2º Wheelhead swivel range: lower swivel, right and left 90º upper swivel, right and left 30º Grinding wheel size: 14" x 1-1/2" x 5" Maximum wheel speed: 6500 SFPM Automatic infeed at table reversal: low: .0002" to .005" high: .0005" to .0125" Headstock spindle taper: No. 9 B & S Infinite workhead speed range: 50 to 500 RPM Headstock swivel: toward wheelhead: 90º away from wheelhead: 30º Infinite table traverse rates: 3 to 220 IPM
EQUIPPED WITH:
Swivel table Swivel workhead Swivel wheelhead (1) Diamond holder Hydraulic operation (1) Swing down internal grinding attachment with (1) spindle Way covers Adjustable table dwell Rapid infeed of wheelhead Pick feed Table dogs (1) Grinding mount with wheel Coolant pump D.C. workhead drive with variable speeds 7-1/2 H.. 3/60/208-220-440 volt wheel drive motor
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6688 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1977 Make - BROWN & SHARPE Model - #13
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6691 , Year = 1977 , Make = BROWN & SHARPE , Model = #13
Category:Tool & Cutter Grinders
Capacity: BROWN & SHARPE Universal Tool & Grinding Machine, Model #13
Ad #6691
Year:
1977
Make:
BROWN & SHARPE
Model:
#13
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
2,950 Lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
New Jersey
Country:
USA
Price:
$sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
BROWN & SHARPE Universal Tool & Grinding Machine, Model #13, Projectordress Added 1992
Capacity:
Grinds work up to 8" diameter Grinds length 14" Distance between headstock and footstock centers 24" Maximum distance between tailstocks 31" Maximum automatic table travel 22" Maximum length of work which can be ground 15" cylindrically with wheel spindle parallel to table ways Minimum/Maximum distance centerline of work to 2.25"/12.5" center of wheel spindle Minimum/Maximum distance center of wheel spindle 3.75" / 12-1/8" to top of table
Wheelhead:
Grinding wheel size 7" diameter x 1/2" wide x 1- 1/4"bore (3) Grinding wheel speeds 2,730 & 3,600 & 5,150 R.P.M. Wheelhead travel 8-3/8" Wheelhead swivels, left and right 110 degrees Vertical adjustment 8-3/8"
Swivel Table:
Working surface 6-1/8" x 44-1/8" Angular settings to left and right 90 degrees Fine screw adjustment for setting tapers up to 3" per foot Table travel 22" Table travel per revolution of handwheel 1/4" slow, 6-1/4" fast
Headstock:
Swivels left and right 100 degrees (4) Spindle speeds 128 to 540 R.P.M. Spindle taper #7 BROWN & SHARPE
EQUIPPED WITH: "Projectordress" optical dresser with "Factsor" digital display (Used for dressing optical forms into the grinding wheel) Four-jaw chuck Three-point steady rest Universal table, workhead, and wheelhead Double ended wheel spindle Dual live/dead headstock spindle Fine cross feed knob (graduated to 0.0001" work diameter) Vertical handwheel graduated to read to .0005" Anti-friction bearings for wheelhead spindle 1/6 H.P. workhead motor 1 H.P. 3/60/220-440 volt wheelhead motor and electrical controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6691 when Inquiring
Asking Price: $sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1986 Make - CLAUSING JAKOBSEN Model - SJ1032
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6680 , Year = 1986 , Make = CLAUSING JAKOBSEN , Model = SJ1032
Category:Surface Grinders
Capacity: 10" x 32" CLAUSING JAKOBSEN Hydraulic Surface Grinder, Model SJ-1032
Ad #6680
Year:
1986
Make:
CLAUSING JAKOBSEN
Model:
SJ1032
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
5,000 Lbs.
Dimension: L x W x H
100" x 66" x 74.75"
Machine Location:
City:
On Request
State:
New York
Country:
USA
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
10" x 32" CLAUSING JAKOBSEN Hydraulic Surface Grinder with Automatic Incremental Downfeed, Model SJ-1032
Work capacity 11.81" x 31.5" Longitudinal travel of table 35.43" Cross travel of table 12.2" Maximum height, spindle center to table 21.65" Working surface of table 9.84" x 31.5" Table longitudinal feed rate, infinitely variable 7.9 to 119 F.P.M. Automatic cross feed at saddle reversal, .079" to 1.19" infinitely variable Automatic vertical feed range, infinitely variable .0001" to .0099" Rapid cross feed rate 240 I.P.M. Rapid vertical feed rate 12 I.P.M. Vertical feed hand wheel reads to .0001" One revolution of vertical feed hand wheel equals .01" Fine cross feed knob reads to .0001" Maximum table load 660 Lbs. Standard wheel size 14" diameter x 1.57" wide Grinding wheel speed 1,700 R.P.M.
EQUIPPED WITH: Hydraulically actuated longitudinal feed Rack and pinion longitudinal table drive during manual operation Hydraulically actuated continuous or intermittent cross feed Fine adjustment cross feed knob graduated to .0001" Double saddle locking device Automatic incremental down feed actuated through stepping motor at each reversal of the saddle for plunge or slot grinding or at each reversal of table for surface grinding. Down feed travel is digitally displayed counting back to zero. Digital display of every .01" movement of down feed hand wheel in both directions. This system works independently of the automatic down feed. 1/2 H.P. motorized rapid vertical feed up and down of grinding wheel head Hydraulically actuated wheel dresser mounted on top to the wheel spindle permitting straight line dressing of wheels up to 1" wide 10" x 32" O.S WALKER "Interlock" electromagnetic chuck with control (The Interlock chuck is designed for very low heat emission and thus is used for very high precision grinding). Operation and spare parts manuals (1) Wheel mount Automatic lubrication system External coolant pump and tank 3 H.P. external hydraulic pump and tank 5.5 H.P. spindle drive motor and electrical controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6680 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1990 Make - KIKINDA Model - PRB-500/1500
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6683 , Year = 1990 , Make = KIKINDA , Model = PRB-500/1500
Category:3 Axis Fully Automatic Surface Grinder
Capacity: 20" x 60" KIKINDA Hydraulic Surface Grinder
Ad #6683
Year:
1990
Make:
KIKINDA
Model:
PRB-500/1500
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
17,000 Lbs.
Dimension: L x W x H
166" x 108" x 107"
Machine Location:
City:
On Request
State:
New Jersey
Country:
USA
Price:
$sold USD
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item
General Description
20" x 60" KIKINDA Hydraulic Surface Grinder With Programmable Incremental Down-feed, Model PRB-500/1500
Width x length ground (nominal capacity) 20" x 60" Maximum table travel 63" Maximum cross feed travel 22" Maximum wheel head height adjustment 25" Hydraulic table feeds up to 83 F.P.M. Auto cross-feed increments 0 to 1" per table stroke Wheel size 16" diameter x 2" wide x 5" bore Auto incremental down-feed, programmable in 0.0001" to .001" increments from
EQUIPPED WITH: Hydraulic table traverse Automatic cross feed Programmable automatic incremental down-feed Automatic wheel retraction and table park at completion of grind cycle Digital display on control console for setting amount of stock to be removed per grinding pass Column mounted digital readout for display of wheel head position Over-the-wheel dresser 20" x 60" Electromagnetic chuck with Neutrofier control Coolant system with paper filtration 11 H.P. spindle drive motor
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6683 when Inquiring
Asking Price: $sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1991 Make - BROWN & SHARPE Model - 16" x 36"
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6677 , Year = 1991 , Make = BROWN & SHARPE , Model = 16" x 36"
Category:3 Axis Fully Automatic Surface Grinder
Capacity: 16" x 36" Brown & Sharpe 3-axes CNC Surface Grinder
Ad #6677
Year:
1991
Make:
BROWN & SHARPE
Model:
16" x 36"
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
14,000 lbs.
Dimension: L x W x H
142" x 124" x 105"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
16” x 36” BROWN & SHARPE Hi-tech 3-axes CNC controlled Surface, profile and creep feed grinder cnc grinder Minimum table stroke .4” Maximum grinding stoke 40” Nominal grinding length 36” Maximum grinding width 17” Nominal grinding width 16” Table size 16” x 36” Max. work height Under 14” Dia. wheel 18” Max. work height Under 16” Dia. wheel 16” Wheel size 16” Dia. x 3” Width Infinitely variable table speed range .4 to 100 IPM Infinitely variable wheel speeds 100 to 3000 RPM Max. reciprocation rate of table 200 S.P.M. Continuous feed rate 0 to 225 IPM Incremental feed, minimum .000010” Incremental feed, maximum 1” Vertical feed of wheel head 19 ¼” Rapid traverse rate of wheel head 0 to 40 IPM
EQUIPPED WITH:
Ball screw drives for cross and wheel slides 14”x32” electromagnetic chuck w/ control Dresser Coolant filtration System Coolant Splash enclosure Wheel mount Automatic lubrication Integral cartridge type Spindle drive 15 H.P. DC Variable speed Spindle drive Allen Bradley Series 9 CNC control with CRT, port Note: machine has an x axis table movement needs adjusting or work
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6677 when Inquiring
Asking Price: $sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
*Originally ordered by the Reynolds Tobacco company as a 16” machine. New 24” diameter chuck and guarding ordered by Reynolds to accommodate larger work.
Magnetic chuck-nominal diameter 24” Magnetic chuck-actual face diameter 26” Swing-maximum in water pan 34” Maximum work height from underside of new grinding wheel to top of magnetic chuck 10” Wheel size, standard 16” diameter x 2”face x 8”bore Wheel collet flange diameter 10 ½” Wheelhead stroke-maximum 13” Wheelhead traverse speed, via hydraulically actuated ram, infinitely variable 0-10 FPM Wheelhead spindle speed 1,400 RPM Table (chuck) speed, hydraulically actuated, infinitely variable 37-155 RPM Table (chuck) slide, power vertical positioning 6 IPM Automatic feed increments to knee, hydraulically controlled with each stroke of the wheelhead, adjustable from .0001” to .0015” Knee feed handwheel-one revolution .020” Knee feed handwheel-finest division .0001 Maximum vertical travel of knee 12” Angular tilt of table, convex and concave 10°
EQUIPPED WITH:
24” diameter electromagnetic chuck with Flux Master IV infinitely variable hold control Hydraulically actuated over-the-wheel dresser with coarse and precise micrometer adjustment Manual or multiple automatic cycle options Shoulder grinding feed control TRABON pneumatically actuated pressurized lubrication system Large capacity external coolant pump and tank Way covers for ram ways 10 H.P. 3/60/575 volt external hydraulic pump motor and tank 20 H.P. 3/60/575 volt spindle drive motor and electrical controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
42” BLANCHARD High Column Vertical Spindle Rotary Surface Grinder, Model 22D-42
Chuck diameter 42” Maximum swing inside splash guards 48” Vertical range under new grinding wheel 23” (6) Table speeds 6 to 33 RPM Wheel speed 720 RPM Wheel diameter 22” Max. load on chuck 3,000 lbs Infinitely variable power downfeed 0.004” to .080”
EQUIPPED WITH: High column design allowing for 23” max. work height under a new grinding wheel Dry base design with POLYCON external coolant filtration system and sludge conveyor Hardened and replaceable base ways 42” Electromagnetic chuck with variable hold Neutrofier control 22” Diameter segmented grinding wheel (Cortland) Trabon automatic lubrication system 50 H.P. 3/60/230-460 volt spindle drive motor and electrical controls
(The approx. Remaining chuck life is 3/8”) Dimensions ( machine only): 11’8” LR x 8’4” FB x 9’1” High
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Diameter of rotating table 23 5/8" Maximum swing inside of water guards 28" Maximum wheel head traverse 9 1/2" Maximum/minimum distance from table to wheel center 16 1/2"/7" Angle of head swivel for conical grinding 10° either side of zero Grinding wheel size 14" dia. x 1 1/4" face x 5" bore Grinding wheel speed 1,400 RPM Grinding wheel continuous cross feed, infinitely variable 8 to 236 I.P.M. Grinding wheel vertical feed .0002" to .00157" Table speeds, infinitely variable to 120 RPM
EQUIPPED WITH:
Vertical column type construction 23 5/8" diameter electromagnetic chuck with RELIANCE variable speed controller and ELECTROMATIC PRODUCTS CO. Neutrol rectifier Electro-hydraulically actuated automatic micrometer down-feed of grinding wheel head at each cross feed reversal Electro-mechanically actuated power rapid traverse of grinding wheel head vertical travel Hydraulically actuated power rapid cross feed of wheel head assembly Over-the-wheel diamond dresser with micrometer adjustment BIJUR lubrication system Self-contained coolant system with 1/4 H.P. drive motor Self-contained hydraulic system with 1 1/2 H.P. drive motor 1 H.P. vertical rapid traverse motor 2 H.P. table drive motor 5 H.P. 3/60/220-440 volt spindle drive motor and electrical controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6676 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 6670 , Year = 1966 , Make = MOORE , Model = No. 3
Category:Jig Grinders
Capacity: No. 3 MOORE Precision Jig Grinder
Ad #6670
Year:
1966
Make:
MOORE
Model:
No. 3
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
3,700 lbs.
Dimension: L x W x H
72" x 84" x 102"
Machine Location:
City:
On Request
State:
New York
Country:
USA
Price:
$sold USD
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item
General Description
No. 3 MOORE Precision Jig Grinder
Table size: 11" x 24" Range: table movement 11" x 18" table top to wheel collet, minimum 2" table top to wheel collet, maximum 18" Spindle to column ways 10" Spindle to column below ways 13 1/2" Infinitely variable spindle speeds 40-250 RPM Infinitely variable spindle feeds 2-120 SPM Grinding capacity grinding wheels 3/16"-5" diamond mandrels 1/64"-3/16" Main spindle slide travel 3 5/8" Angular adjustment of spindle either way 1 1/2° included angle 3° Radial offset of grinding spindle from center to 1 1/8" off center by rough adjustment while running .0001" adjusted for distance of .100" anywhere in the 1 1/8" range
EQUIPPED WITH:
Hardened, ground and lapped steel ways (no gibs) Hardened, ground and lapped lead screws (1) 40,000 RPM jig grinding head BIJUR spraymist coolant
Way covers ½ H.P. variable D.C. motor with rectifier
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6670 when Inquiring
Asking Price: $sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 6669 , Year = 1983 , Make = MOORE , Model = G-18
Category:Jig Grinders
Capacity: MOORE Precision Jig Grinder
Ad #6669
Year:
1983
Make:
MOORE
Model:
G-18
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
4,000 lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
New York
Country:
USA
Price:
$sold USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
MOORE Precision Jig Grinder, Mdl. G-18
Table size 11" x 24" Range, table movement 11" x 18" table top to wheel collet, minimum 2" table top to wheel collet, maximum 18" Spindle to column ways 10" Spindle to column below ways 13 1/2" Infinitely variable spindle speeds 25-225 RPM Infinitely variable spindle feeds 2-120 SPM Spindle feed adjustable from 0.100" to 3 5/8" Grinding wheel speeds 6,000-175,000 RPM Grinding capacity, grinding wheels 1/64"-3 1/2" Angular adjustment of spindle either way 1-1/2° included angle 3° Radial offset of grinding spindle from center to 1 1/8" off center by rough adjustment while running .0001" adjusted for distance of .100" anywhere in the 1 1/8" range
EQUIPPED WITH:
Hardened, ground and lapped steel ways (no gibs) Hardened, ground, and lapped nitralloy leadscrews Leadscrews and nuts that are fully immersed and operated in a bath of oil (2) MOORE grinding heads Misc. grinding wheels and accessories
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6669 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 6673 , Year = , Make = MATTISON , Model = 24-42
Category:Vertical Spindle - Blanchard Type
Capacity: 42" MATTISON Hi-Column Vertical Rotary Surface Grinder, Model 24-42
Ad #6673
Year:
Make:
MATTISON
Model:
24-42
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
25,000 lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
General Description
42" MATTISON Hi-Column Vertical Rotary Surface Grinder, Model 24-42
Completely rebuilt 1997 by Dial Industries
Table Diameter 42" Max. Swing 56" Max. Work Height 30" 5 Table Speeds 8 to 32 RPM Magnetic chuck life 5/8" Continuous feed range .005 to .165 IPM Feed wheel graduated in steps .0001" Wheel Speed 700 RPM Equipped with:
42" Dia. magnetic chuck (new 1997) Tilt spindle feature Automatic cycle 22" Dia. segmental chuck with quantity of new segments Motorized rapid traverse to wheel Newall DPG 1-axes D.R.O. Barnes Magnetic filtration system Neutrofier II solid state chuck control Motor amp meter Lub + air fault system Work light Trabon auto. lub. system 100 H.P. wheel drive with cooling fan + filter
Max. height: 11'6"
Dimensions: Machine only ( 109"L x 62"W x 126" High) with head down
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1976 Make - JONES & SHIPMAN Model - 1311
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6664 , Year = 1976 , Make = JONES & SHIPMAN , Model = 1311
Category:Cylindrical Grinders (O.D. & I.D.)
Capacity: 10” x 18”cc JONES & SHIPMAN universal cylindrical grinder, Model 1311
Ad #6664
Year:
1976
Make:
JONES & SHIPMAN
Model:
1311
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
5,200 lbs.
Dimension: L x W x H
66" x 53.5" x 69"
Machine Location:
City:
On Request
State:
New York
Country:
USA
Price:
$sold USD
General Description
10” x 18”cc JONES & SHIPMAN universal cylindrical grinder, Model 1311
Maximum diameter ground with new wheel 10” Maximum grinding length between centers 18” Maximum workpiece weight between centers 220 lbs. Table traverse per handwheel revolution 5” Table traverse fine feed graduations 0.50” Table traverse steplessly variable per minute 0.0005” Minimum table stroke under hydraulic control 0.040” Table swivel adjustment-included angle clockwise/ included angle anti-clockwise 19°/20° Infeed rate at table reversal, reduction in work diameter 0.0002”-0.0012” Wheelhead feed handwheel-rapid/standard feed 0.250”/0.50” per revolution, reduction in work diameter (6) workhead speeds 40-320 RPM Workhead swivel, clockwise/counter-clockwise 15°/90° Workhead and tailstock spindle center taper #3 Morse Standard grinding wheel (Type EIU wheelhead) 14” diameter x 1” wide x 5” bore (2) wheelhead speeds 2,000 & 2,680 RPM Wheelhead swivel adjustment each side or normal position 180° Cross traverse of wheelhead 8-1/16”
EQUIPPED WITH:
Manually operated or hydraulically actuated table traverse Manually operated, automatic intermittent (at table reversal) and automatic continuous (plunge grinding) modes of wheelhead infeed Rapid wheelhead advance and retraction Swing-around internal grinding attachment with spindle ¾ H.P. 3/60/220-440 volt motorized workhead with 6” diameter 4-jaw chuck, 6 ¼” diameter magnetic chuck, and combination live/dead center Tailstock with assorted full and half centers (1) 5/16”-3” diameter capacity 3-point plain-type steady rest (1) 5/16”-3” diameter capacity 2-point open-type steady rest Table mounted diamond holder for dressing wheel Self-contained hydraulic system with 1 H.P. motor External coolant pump and tank Manually operated 1-shot lubrication system 5.5 H.P. 3/60/220-440 volt wheelhead motor and electrical controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1958 Make - MATTISON Model - PLANER TYPE
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6613 , Year = 1958 , Make = MATTISON , Model = PLANER TYPE
Category:Vertical Spindle - Blanchard Type
Capacity: 68" X 320" MATTISON PLANER TYPE HORIZONTAL GRINDER
Ad #6613
Year:
1958
Make:
MATTISON
Model:
PLANER TYPE
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Texas
Country:
USA
Price:
$sold USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
68" X 320" MATTISON PLANER TYPE HORIZONTAL SPINDLE RECIPROCATING TABLE HYDRAULIC SURFACE GRINDER
MANUFACTURED 1958. . . REBUILT AND MODERNIZED BY CROSS & TRECKER IN 1988. WORK TABLE WORKING SURFACE: 68" X 300" WORK TABLE AS SET UP W/CHUCKS: 72" X 167" TABLE TRAVEL: 320" DISTANCE BETWEEN HOUSINGS: 84" MAXIMUM HEIGHT UNDER WHEEL: 60" GRINDING WHEEL CAPACITY: 20" X 6" TABLE LOAD CAPACITY: 55,000 LBS. TABLE SPEEDS: 0-100 FPM INF. VAR. WHEELHEAD TRANSVERSE SPEED: 0-30 FPM WHEELHEAD MOTOR: 30 HP EQUIPPED WITH: (4) 24" X 72" ELECTRO-MAGNETIC CHUCKS CROSS RAIL MOUNTED WHEELHEAD BALLSCREWS - CROSS/GRIND FEED WHEEL GUARD DRESSER POWER CLAMPING ALLEN BRADLEY CONTROLS W/AIR CONDITIONING HYDRAULIC TABLE DRIVE AC SERVO DRIVES PAPER MEDIA FILTRATION HARD INSERTS ON CROSS RAIL FULL PENDANT CONTROL WORK PLATFORM & BENCHES ELECTRICAL DOCUMENTATION
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6613 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6614 when Inquiring
Asking Price: $sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1978 Make - GALLMEYER & LIVINGSTON Model - 550
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6612 , Year = 1978 , Make = GALLMEYER & LIVINGSTON , Model = 550
Category:Surface Grinders
Capacity: 12" X 36" GALLMEYER & LIVINGSTON MODEL 550 HYDRAULIC SURFACE GRINDER
Ad #6612
Year:
1978
Make:
GALLMEYER & LIVINGSTON
Model:
550
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
9,000 LBS.
Dimension: L x W x H
123" x 70" x 103"
Machine Location:
City:
On Request
State:
Texas
Country:
USA
Price:
$sold USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
USED 12" X 36" GALLMEYER & LIVINGSTON MODEL 550 HYDRAULIC SURFACE GRINDER
CAPACITY: 12" WIDTH 18" HEIGHT 36" LENGTH TABLE TRAVEL, LONGITUDINAL: 47-1/2" TABLE TRAVEL, TRANSVERSE: 13-3/4" WORKING SURFACE OF TABLE: 12" X 36" VERTICAL MOVEMENT OF WHEELHEAD: 19" STANDARD WHEEL SIZE: 14" X 1-1/2" X 5" MAX. DISTANCE WHEEL TO TABLE WITH NEW WHEEL: 18" SPINDLE SPEEDS: 1750 & 2100 RPM MOTORS: 7-1/2 HP SPINDLE 3 HP HYDRAULIC EQUIPPED WITH: POWER INCREMENTAL DOWNFEED POWER WHEELHEAD ELEVATION 12" X 36" ELECTROMATIC CHUCK W/CONTROLS COOLANT SYSTEM PUSH BUTTON CONTROL STATION WHEEL DRESSER SPLASH GUARDS AUTOMATIC LUBRICATION
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6612 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6449 when Inquiring
Asking Price: $sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
COOLANT SYSTEM NEUTROFIER MAGNETIC CHUCK CONTROL: - AREA ---------------------------- 1200 SQ. IN. @ 1,000 WATTS - S/N ----------------------------- 7767726X - MODEL --------------------------- EMLV10DJ
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
Max. swing over table extension w/o guard 24 ½” Max. swing inside guard 28” Swing, work-head swiveled 90° 12” Angular adjustment of work-head 90° Work-head cross-slide travel 1 ½” Distance work-head flange to edge of wheel slide 0-29 1/16” Table speeds for grinding 0-18 FPM Variable work-head speeds 50-500 RPM Rapid traverse table 18 FPM One turn of cross feed hand-wheel .050” on dia. Cross feed in increments, at one or both ends of table stroke .0001”-.0005” on dia. Minimum stroke .125” One turn of work-slide hand-wheel .100” One turn of table hand-wheel 3 ¾”
EQUIPPED WITH:
Hydraulic unit Coolant tank w/ pump 12,000 RPM Heald Red Head Spindle Auto. Lub. System TRAK 101 1-axis D.R.O. 12” Dia. 3-jaw universal chuck Work light Chuck guard 1 ½ H.P. work-head drive motor 5 H.P. wheel-head drive motor
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6149 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1942 Make - CINCINNATI Model - ER
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7678 , Year = 1942 , Make = CINCINNATI , Model = ER
Category:Cylindrical Grinders (O.D. & I.D.)
Capacity: 12´´ X 72´´ CINCINNATI UNIVERSAL CYLINDRICAL GRINDER
Ad #7678
Year:
1942
Make:
CINCINNATI
Model:
ER
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Mid West
Country:
USA
Price:
$sold USD
General Description
12´´ X 72´´ CINCINNATI UNIVERSAL CYLINDRICAL GRINDER
SWING OVER BED ...................... 12-1/2´´ DISTANCE BETWEEN CENTERS ............ 72´´ HYDRAULIC TABLE TRAVEL .............. 3 TO 220 IPM AUTOMATIC INFEED .................... .002´´ TO .0125´´ WORKHEAD SPEEDS (VARIABLE) .......... 55 TO 500 RPM GRINDING WHEEL ...................... 14´´ X 1-1/2´´ DROP DOWN ID ATTACHMENT TABLE MOUNTED DRESSER 5´´ STEADY REST BACKREST COOLANT 3 HORSEPOWER WHEELHEAD MOTOR 1-1/2 HORSEPOWER HYDRAULIC MOTOR 1 HORSEPOWER VARIABLE SPEED WORKHEAD MOTOR 3/4 HORSEPOWER ID WHEELHEAD MOTOR
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7656 , Year = 1946 , Make = CINCINNATI , Model =
Category:Cylindrical Grinders (O.D. & I.D.)
Capacity: 14´´ X 36´´ CINCINNATI PLAIN CYLINDRICAL GRINDER
Ad #7656
Year:
1946
Make:
CINCINNATI
Model:
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Mid West
Country:
USA
Price:
$Sold USD
General Description
14´´ X 36´´ CINCINNATI PLAIN CYLINDRICAL GRINDER
SWING OVER TABLE ................... 14-1/4´´ MAXIMUM DISTANCE BETWEEN CENTERS ... 37´´ WORKHEAD SPEEDS .................... 40 TO 160 RPM TABLE FEEDS ........................ (24) 3-1/2 to 120 IPM AUTO INFEED AT TABLE REVERSAL STANDARD GRINDING WHEEL ............ 30´´ DIAMETER X 3´´ FACE RAPID TRAVERSE OF WORK HEAD ........ 16 IPR COOLANT 20 HORSEPOWER MAIN MOTOR 1 HORSEPOWER/VARIABLE SPEED WORKHEAD MOTOR
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1973 Make - CINCINNATI Model - 370 PLAIN
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7657 , Year = 1973 , Make = CINCINNATI , Model = 370 PLAIN
Category:Cylindrical Grinders (O.D. & I.D.)
Capacity: 14´´ X 48´´ CINCINNATI PLAIN CYLINDRICAL GRINDER
Ad #7657
Year:
1973
Make:
CINCINNATI
Model:
370 PLAIN
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Mid West
Country:
USA
Price:
$sold USD
General Description
14´´ X 48´´ CINCINNATI PLAIN CYLINDRICAL GRINDER
MACHINE EQUIPPED WITH ELECTRONIC COMMAND (BALL SCREW) INFEED SWING OVER BED .......................... 14-1/2´´ DISTANCE BETWEEN CENTERS ................ 48´´ HYDRAULIC TABLE TRAVEL ............. 3 TO 250 IPM AUTOMATIC INFEED OF WHEEL HEAD 0.00075 - 0.150 ipm DIAMETER OF GRINDING WHEEL .............. 30´´ MAXIMUM WIDTH OF GRINDING WHEEL ......... 4´´ PLUNGE GRINDING WORKHEAD JOG/HEADSWIVEL TABLE WITH DIAL INDICATOR AUTOMATIC WHEEL BALANCING DRESSER MOUNTED ON TAILSTOCKCOOLANT WITH PAPER FILTER SYSTEM 20 HORSEPOWER WHEELHEAD MOTOR 3 HORSEPOWER HYDRAULIC DRIVE MOTOR 1 HORSEPOWER WORKHEAD MOTOR
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7655 , Year = 1952-53 , Make = LANDIS , Model = CH
Category:Cylindrical Grinders (O.D. & I.D.)
Capacity: 10´´ X 96´´ LANDIS PLAIN CYLINDRICAL GRINDER
Ad #7655
Year:
1952-53
Make:
LANDIS
Model:
CH
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
17,000lbs
Dimension: L x W x H
7ft x 24ft.
Machine Location:
City:
On Request
State:
Mid West
Country:
USA
Price:
$sold USD
General Description
10´´ X 96´´ LANDIS PLAIN CYLINDRICAL GRINDER
SWING OVER BED .......................... 10-3/4´´ DISTANCE BETWEEN CENTERS ................ 96´´ HYDRAULIC TABLE TRAVERSE ................ 3 TO 130 IPM AUTOMATIC INFEED AT TABLE REVERSAL ...... .00025´´ TO .003´´ WORK HEAD SPEEDS ........................ 54, 76, 107, 150 RPM DIAMETER OF GRINDING WHEEL .............. 30´´ WIDTH OF GRINDING WHEEL ................. 3´´ GRINDING WHEEL SPEEDS ................... 810 & 995 RPM TAPER IN HEADSTOCK AND FOOT STOCK ....... #14 JARNO COOLANT 15 HORSEPOWER WHEEL HEAD MOTOR 3 HORSEPOWER HYDRAULIC MOTOR 1 HORSEPOWER WORK HEAD MOTOR
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1974 Make - TOYODA Model - RB0818
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7660 , Year = 1974 , Make = TOYODA , Model = RB0818
Category:Cylindrical Grinders (O.D. & I.D.)
Capacity: 12" X 40" TOYODA UNIVERSAL CYLINDRICAL GRINDER
Ad #7660
Year:
1974
Make:
TOYODA
Model:
RB0818
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Mid West
Country:
USA
Price:
$Sold USD
General Description
12´´ X 40´´ TOYODA UNIVERSAL CYLINDRICAL GRINDER
TYPE .............................. GUP 30 X 100 SWING OVER BED .................... 12´´ MAXIMUM DISTANCE BETWEEN CENTER ... 40´´ WHEEL SPEEDS ...................... 1610 RPM WORK HEAD SPEEDS .................. 0 TO 300 RPM (VARIABLE) GRINDING HEAD SWIVEL .............. 180 DEGREES WORK HEAD SWIVELS ................. 180 DEGREES HYDRAULIC TABLE TRAVEL ............ YES AUTO INFEED AT TABLE REVERSAL ..... YES PLUNGE GRINDING ................... YES DROP DOWN ID ATTACHMENT ........... YES WHEEL HEAD MOTOR .................. 5 HORSEPOWER HYDRAULIC MOTOR ................... 2 HORSEPOWER DROP DOWN INTERNAL GRINDING MOTOR . 1 HORSEPOWER WORK HEAD MOTOR ................... 1/2 HORSEPOWER
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1956 Make - CINCINNATI Model - ER
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7659 , Year = 1956 , Make = CINCINNATI , Model = ER
Category:Cylindrical Grinders (O.D. & I.D.)
Capacity: 12´´ X 36´´ CINCINNATI UNIVERSAL CYLINDRICAL GRINDER
Ad #7659
Year:
1956
Make:
CINCINNATI
Model:
ER
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Mid West
Country:
USA
Price:
$Sold USD
General Description
12´´ X 36´´ CINCINNATI UNIVERSAL CYLINDRICAL GRINDER
SWING OVER BED ....................... 12-1/2´´ MAXIMUM CENTER DISTANCE .............. 36´´ HYDRAULIC TABLE FEED ................. 3 TO 240 IPM PICK FEED AT TABLE REVERSE VARIABLE SPEED WORKHEAD WHEEL SIZE ........................... 12´´ X 1´´ X 6´´ COOLANT 3 HORSEPOWER WHEELHEAD MOTOR 1 HORSEPOWER HYDRAULIC MOTOR
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year -Make - Boyer Schultz Model - Challenger
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7486 , Year = , Make = Boyer Schultz , Model = Challenger
Category:Surface Grinders
Capacity: Boyer Schultz Challenger 6 x 18 Surface Grinder
Ad #7486
Year:
Make:
Boyer Schultz
Model:
Challenger
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
9,000LBS
Dimension: L x W x H
56" x 38" x 62"
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$sold USD
General Description
6 x 18 Surface Grinder Fine Line Chuck Coolant Pump Auto X & Y Manual Z Overhead Dresser Light
Full Machine Specifications
6 x 12 Mag Chuck Fine Line Overhead Wheel Dresser Manual Z Axis Coolant Pump and Kit Model 2A618 Hydraulic X & Y Longitudinal Table Travel 19" Cross Feed of Table 7" Standard Grinding Wheel Size 8"x5/8"x1-1/4" hole Work Height Under Wheel 0" to 10-3/4" Table Working Surface 18" x 5 5/8" Spindle Speed-(Direct Drive) 3,400 RPM's Hand-Wheel Graduations-Vertical .0005" Hand-Wheel Graduations-Cross .001" Walker Fine Line Chuck Coolant with Coolant Tank Over the Wheel Dresser Light Auto Lube
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7293 when Inquiring
Asking Price: $sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
36” #18-36 BLANCHARD Rotary Surface Grinder
Wet base design Range 36” Diameter Work height under new ring wheel 12” Wheel size 18” x 5” x 15” cylinder Wheel speed 720 RPM (6) Chuck speeds 6,9,12,18,25,33 RPM
EQUIPPED WITH:
18” x 5” x 15” Cylinder wheel 36” Dia. one-piece magnetic chuck with neutrofier controls Power or manual down-feed of head Power rapid traverse of wheel and table 2 H.P. table drive 25 H.P. AC Main drive Motor w/ controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7269 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1985 Make - TAISEI Model - GRI-2000S
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7267 , Year = 1985 , Make = TAISEI , Model = GRI-2000S
Category:Cylindrical Grinders (O.D. & I.D.)
Capacity: Model GRI-2000S TAISEI Internal Grinder
Ad #7267
Year:
1985
Make:
TAISEI
Model:
GRI-2000S
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
17,500 lbs
Dimension: L x W x H
232.25" x 46" x 81.5"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
General Description
Model GRI-2000S TAISEI Internal Grinder
Diameter of hole to be ground 1.97” to 27.6” Max. length of hole ground 39.4” Max. length of work 78.7” Max. swing inside chuck guard 33.5” Height from table top to centerline of work over table 19.7” Max. swing over table 39.4” Max. stroke of table 78.7” (6) Table grinding feeds 5.12-35.43 IPM (6) Table rapid traverse rates 10.24-70.87 IPM Table travel per revolution of handwheel 0.9” Workhead spindle taper No. 5 M.T. Workhead swivel adjustment up to 15 degrees ± Workhead transverse adjustment: Forward from center 3.9” Backward from center 19.8” Workhead transverse adjustment per revolution of handwheel 0.24” Infinitely variable work head speeds 10-150 RPM Manual wheel infeed (cross feed) 0.04” Manual wheel infeed (crossfeed) per revolution of handwheel 0.0001” Automatic hydraulic wheel infeed (crossfeed) per table stroke on work radius 0.0001” to 0.0012” Hydraulic cross & reverse arrangement of wheelhead 8” Grinding heads spindle speed ranges 4670 to 7000 RPM
EQUIPPED WITH:
(6) Grinding spindles (2) 4.72” Dia. x 42” reach (1) 4.72” Dia. x 24” reach (1) 4” Dia. x 32” reach (1) 2 ¾” Dia. x 12” reach (1) 1” Dia. x 12” reach Inch calibrated wheel infeed index dial graduated to read 0.0002” per division on work diameters Infinitely variable workhead speeds Automatic hydraulic wheel infeed Hydraulic cross-traverse arrangement of wheelhead (8”) Common mounting base for work rest and wheel dresser Angular wheel dresser 32” Dia. faceplate with dual center 28” Dia. 4-jaw chuck 3 point roller steady rest w/ riser Automatic cycle controls Rapid traverse table Chuck guard Wheel balancing stand with mandrel (11) Wheel mounts with grinding wheels 25” x 42” x 10 3/8” High T-Slotted auxiliary work support table Exterior coolant system with splash guards Automatic lubrication 2 H.P. Table feed motor 5 H.P. Workhead drive motor with ring-cone type speed variation and work spindle controller 5 H.P. Wheel spindle drive motor Main and auxiliary control panels
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7287 , Year = 1977 , Make = RAMCO , Model = 18T/4
Category:Belt & Disc Grinders
Capacity: Mdl.18T/4 RAMCO 4-headed dry type drum sander w/dust collector
Ad #7287
Year:
1977
Make:
RAMCO
Model:
18T/4
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
Mdl.18T/4 RAMCO 4-headed dry type drum sander with dust collector, Series 72
Width of conveyor belt 18” Overall length of conveyor 172”
EQUIPPED WITH:
(4) separately driven drum sanding heads Manual adjustment of head height 2 H.P variable speed conveyor Pneumatic belt tracking Adjusting holddown rolls Air braking Extra sanding belts (4) motor amp meters 10 H.P. TORIT free standing dust collector with 55gal. Drum, Model 30-10-PH-55, S/N H 325 (4) 20 H.P. 3/60/230-460 volt separate drum drive motors Dimensions (Not including dust collector): 189”L x 61”W x 100”High
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7287 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
8”x18” permanent magnetic chuck Automatic incremental down-feed which can be set to operate at each table double stroke or at each cross reversal. Amount of stock to be removed is set on a dial indicator with electric limit switch. Total feed travel is pre-selected and set with a micrometer screw Hydraulic 2-axes operation Coolant system Over-the-wheel dresser (1)wheel mount w/wheel 1.45/1.7 KW Spindle drive Motor
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7271 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year -Make - BROWN & SHARPE Model - No.4
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7264 , Year = , Make = BROWN & SHARPE , Model = No.4
Category:Cylindrical Grinders (O.D. & I.D.)
Capacity: 14” x 60”cc No.4 BROWN & SHARPE Universal cylindrical Grinder
Ad #7264
Year:
Make:
BROWN & SHARPE
Model:
No.4
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
10,400 lbs
Dimension: L x W x H
195.25" x 76" x 61"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
General Description
14” x 60”cc No.4 BROWN & SHARPE Universal cylindrical Grinder with swing-down internal attachment, Rebuilt 1970
Swing over table 14” Nominal distance between centers 60” Max. distance between centers 63 ¾” Distance centerline of work to centerline of External grinding spindle Max. 15 ½” Min. 3 ½” External grinding spindle speeds 1600,2000,2400 RPM Internal grinding spindle speed 12,500 RPM Headstock swivel 180º Infinite work head speeds 25-500 RPM Taper of footstock center No.10 B&S Infinite hydraulic or hand table traverse speed range 3 to 150 IPM Swivel table range 6º back, 2º 3’ For., 2 ½” per ft.back, 1” per ft. for. Cross feed range .0001” to .003” Standard wheel size 14”x1”x5”
EQUIPPED WITH:
Hydraulic table movement Swivel table Swing-down internal grinding attachment Swivel work head and wheel head Automatic cross feed (2)Wheel mounts (5)Grinding wheels Telescopic bed way covers Table dwell control Adjustable table travel dogs (3)Dead centers ¼ HP work head drive 1 HP internal spindle drive 3 HP external spindle drive
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Cylinder wheel 16" Dia. magnetic chuck with neutrofier controls Vertical downfeed of wheel by hand or power Rapid traverse of wheel head 1/4 H.P. coolant pump 15 H.P. A.C.wheel drive motor with controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7268 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1978 Make - GIDDINGS & LEWIS (BICKFOR Model - HC Exactamatic
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7266 , Year = 1978 , Make = GIDDINGS & LEWIS (BICKFOR , Model = HC Exactamatic
Category:Tool & Cutter Grinders
Capacity: GIDDINGS & LEWIS Semi-automatic drill point grinder, HC Exactamatic
Ad #7266
Year:
1978
Make:
GIDDINGS & LEWIS (BICKFOR
Model:
HC Exactamatic
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
1,200 lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
GIDDINGS & LEWIS (BICKFORD) Semi-automatic drill point grinder, Model HC Exactamatic
Drill point type and capacities: conventional point 1/16" to 1 1/2" diameter helical point 1/16" to 1" diameter racon point 1/16" to 1" diameter split point 1/16" to 1/2" diameter pyrcon (four facet) 1/16" to 1" diameter Grinding wheel size 12" diameter x 5" bore x 3/4" face Drill point included angles from 90 degrees to 140 degrees
EQUIPPED WITH:
Capability to handle all types of 2-fluted, right hand drills Lip clearance angle adjusted from the operator’s control console Point angle varied from by angular adjustment of workhead Cam action-generated rotary motion in all three axes set at the operator’s control console Built-in cam-formed wheel dresser Bellows airfeed attachment (5) wheels mounts with (15) wheels (6) quick-change bushing index plates (20) rubber flex collet holders with (8) extra flex collets from 1 1/64" to 1 1/2" diameter capacity (10) Cams (33) Quick-change drillholder sleeves from 1 1/64" to 1 1/2" diameter capacity (12) expandable collets (2) wheel balancing arbors Aget Mistkop oil mist collector with stand Work light 1/8 H.P. coolant pump motor 1/4 H.P. workhead motor 1 H.P. grinding wheel drive motor and electrical controls 3/60/575 volt controls with transformer for 3/60/230 or 460 volt input
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7266 when Inquiring
Asking Price: $sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1988 Make - CINCINNATI-MILACRON Model - #2MT
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7277 , Year = 1988 , Make = CINCINNATI-MILACRON , Model = #2MT
Category:Tool & Cutter Grinders
Capacity: CINCINNATI-MILACRON Universal tool and cutter grinder, Model #2MT
Ad #7277
Year:
1988
Make:
CINCINNATI-MILACRON
Model:
#2MT
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
3,150 lbs.
Dimension: L x W x H
91" x 58"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
CINCINNATI-MILACRON Universal tool and cutter grinder, Model #2MT
Swing over table 10” diameter Swing over table with raising blocks 14” diameter Length between right and left hand tailstocks 27” Length between tailstock and work head 21 ½” Range: longitudinal 16” cross 10” Table working surface 6” x 36” Table swivels 180° Swivel table adjustments-Tange bar taper setting device (toward & away from wheel head) 5” per foot on diameter -Fine adjustment taper setting device (toward& away from wheel head) 2” per foot on diameter Table graduations in center 90° Vertical movement of grinding wheel spindle 10 ½” Grinding wheel head swivels 360° Grinding wheel head tilts above & below center 15° Maximum distance, centerline of spindle to tabletop 13 ½” Spindle speeds, 6” wheel, surface speed 6,022 FPM-3,837 RPM 3½” wheel, surface speed 5,887 FPM-6,442 RPM
EQUIPPED WITH:
Swiveling and tilting wheel head Swivel table Duplicate controls operating the machine at the front, right or left hand end of the table, or at the rear, right or left hand side of the column Anti-friction ball bearing table rolling in replaceable hardened steel v-ways H.D. Universal work head Left and right hand tailstocks with centers “Tange Bar” taper setting device permitting quick and precise positioning of the swivel table when grinding tapers 1-shot lubrication system 1 H.P. 3/60/230-460 volt grinding wheel drive motor and electrical controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7277 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 7276 , Year = 1967 , Make = BLOHM , Model = HFS-15
Category:Surface Grinders
Capacity: 12” x 60” HFS-15 BLOHM 3-Axis Hydraulic Surface Grinder
Ad #7276
Year:
1967
Make:
BLOHM
Model:
HFS-15
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
11,750 lbs.
Dimension: L x W x H
237" x 88" x 90"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
12” x 60” HFS-15 BLOHM 3-Axis Hydraulic Surface Grinder
Table clamping surface: 12” x 86” Max.length ground 60” Max.width ground 16” Max.distance from table to spindle centre line 23” Table cross movement 14” Longitudinal hydraulic table travel 67” Automatic electric cross feed .08-2 9/16 inches per stroke Longitudinal table speed 6 ½-82 FPM Grinding wheel speeds 1400/2800 RPM Grinding wheel size 12” x 2” x 3” Vertical feed range 1-20 microns EQUIPPED WITH: Finimatic automatic incremental down-feed of wheel Rapid traverse to wheel head 12” x 60” electromagnetic chuck w/controls Pendant control Over-the-wheel dresser Coolant system (1)wheel mount w/wheel Vertical micrometer depth stop Work light 7 ½ H.P. wheel drive motor
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7276 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1984 Make - BROWN & SHARPE Model - Series II Micromaster
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7272 , Year = 1984 , Make = BROWN & SHARPE , Model = Series II Micromaster
Category:Surface Grinders
Capacity: 8"x18" BROWN & SHARPE Hydraulic Feed Surface Grinder, Model: Series II
Ad #7272
Year:
1984
Make:
BROWN & SHARPE
Model:
Series II Micromaster
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
2,520 Lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
New York
Country:
USA
Price:
$Sold USD
General Description
8" x 18" BROWN & SHARPE Hydraulic Feed Surface Grinder, Model: Series II Micromaster
Width and length of work ground 8" x 18" Height of work ground with 7" diameter wheel15" on machine Range: longitudinal (maximum) 22" Cross 9-1/2" Vertical 15-3/4" Feeds: longitudinal 5 to 100 F.P.M. cross, infinitely variable 0.01" to 0.25" Grinding wheel speed 2,860 R.P.M. Grinding wheel size, standard 8" diameter x 1-1/4" bore x 1/2" wide
Continuous hydraulic transverse of 10 I.P.M. provided for wheel truing Continuous hydraulic transverse of 12 F.P.M. provided for rapid positioning of wheel Cross feed and vertical feed hand wheels read to 0.0002" Fine feed knobs mounted adjacent to the vertical 0.0001" and cross feed hand wheels are graduated to read to
EQUIPPED WITH:
Hydraulically actuated longitudinal and cross feeds Oriflex spindle drive #DP7 NEWALL two-axis digital readout for cross and down feed travel 8" x 18" O.S WALKER fine division permanent magnetic chuck Fine-feed knobs (graduated to 0.0001") to vertical and cross feed handwheels 1 H.P. 3/60/230-460 volt hydraulic pump motor 1 H.P. 3/60/230-460 volt spindle motor and electrical controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7279 , Year = 1973 , Make = KARSTENS , Model = A
Category:Cylindrical Grinders (O.D. & I.D.)
Capacity: 12"x 16"cc Model A KARSTENS Hydraulic Universal Grinder
Ad #7279
Year:
1973
Make:
KARSTENS
Model:
A
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
5,070 Lbs.
Dimension: L x W x H
74" x 62" x 72"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
General Description
12"x 16"cc Model A KARSTENS Hydraulic Universal Grinder
Maximum swing: 11.81" Maximum work between centers: 15.75" Maximum wheel diameter: 15.75" x 5" diameter hole Maximum width of wheel: 3.837" Infinitely variable work head speeds: 30 to 450 RPM Swivel table graduated to a maximum angle: 11 1/2 º Maximum work piece weight between centers: 220 Lbs. Maximum work piece weight chucking: 110 Lbs. Infinitely variable infeed range: .00004" - .001" Hydraulic table traverse infinitely variable: up to 236 IPM Minimum table stroke: 1/32" Spindle speeds: 1600/2000 RPM Work head taper hole in spindle: No. 5 M.T. Spindle bore: 1 ?" Tail stock taper hole: No. 4 M.T. Plunge grinding speed: .002 to .157 IPM Total infeed travel of hand wheel: 3 5/32" Swivel of work head: 90º
EQUIPPED WITH: Hydraulic operation Swivel work head Swivel wheel head Swivel table Variable work head speeds Plunge feed Pick feed Fine and compensating feed control (2) Wheel mounts (1) New grinding wheel .44/.89 H.P. Variable speed work head drive 5.4 H.P., 1420 RPM wheel drive motor
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1977 Make - GIDDINGS & LEWIS Model - HC EXACTAMATIC
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7265 , Year = 1977 , Make = GIDDINGS & LEWIS , Model = HC EXACTAMATIC
Category:Tool & Cutter Grinders
Capacity: GIDDINGS & LEWIS (WINSLOW) Drill Point Grinder, Model HC Exactamatic
Ad #7265
Year:
1977
Make:
GIDDINGS & LEWIS
Model:
HC EXACTAMATIC
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
1,200 lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
GIDDINGS & LEWIS (WINSLOW) Drill Point Grinder, Model HC Exactamatic
Drill Point type and capacities: Conventional Point 1/16" to 1" diameter Helical Point 1/16" to 1" diameter Racon Point 1/16" to 1" diameter Split Point 1/16" to 1/2" diameter Pyrcon (four facet) 1/16" to 1" diameter Grinding wheel size 12" diameter x 5" bore x 3/4" face Drill point included angles from 90 degrees to 140 degrees
EQUIPPED WITH:
Capability to handle all types of 2-fluted, right hand drills Lip clearance angle adjusted from the operator’s control console Point angle varied from by angular adjustment of workhead Cam action-generated rotary motion in all three axes set at the operator’s control console Built-in cam-formed wheel dresser (4) Wheels mounts (6) Quick-change inch bushing plates (9) Rubber flex collet holders from 1/16" to 3/4" (17) Cams Quick-change holder with (17) expandable collets from 1/16" to 1" Aget Mistkop oil mist collector 1/8 H.P. coolant pump motor 1/4 H.P. workhead motor 1 H.P. grinding wheel drive motor and electrical controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7265 when Inquiring
Asking Price: $sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1980 Make - SUMMIT Model - 12x30-K
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7274 , Year = 1980 , Make = SUMMIT , Model = 12x30-K
Category:Surface Grinders
Capacity: 12”x30” SUMMIT Hydraulic Surface Grinder, automatic incremental down
Ad #7274
Year:
1980
Make:
SUMMIT
Model:
12x30-K
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
5,800 lbs.
Dimension: L x W x H
8 x 5 x 7
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item
General Description
12”x30” SUMMIT Hydraulic Surface Grinder with automatic incremental downfeed. Model 12 x 30-K
Table working area: 11.8” x 44.5” Maximum grinding width: 13 3/4” Maximum grinding length: 29 1/2” Maximum distance from underside of 12”diameter Grinding wheel to top of table: 19.7” Wheel size: 12” diameter x 2” wide x 5” bore Wheel speed: 1,500 RPM Longitudinal table speed range, infinitely variable: 6 to 7 FPM Automatic cross feed at each table reversal Adjustable from: .080” to .800” Downfeed handwheel graduated in increments of: .0004” Minimum downfeed increment: .00008”
EQUIPPED WITH:
All three axes traveling on roller bearing slides Hardened and ground ways on table and saddle Hydraulically actuated longitudinal feed Electro-mechanically actuated cross feed Electro-mechanically controlled automatic incremental downfeed of grinding wheelhead at each table reversal for plunge grinding or at each saddle reversal for surface grinding. Full automatic grinding cycle includes coarse downfeed to the wheel followed by a fine downfeed and then an automatic spark out. Retraction of the grinding wheel head at the end of the grinding cycle is operator controlled. Motorized power rapid traverse to grinding wheelhead 10” x 30” Electromagnetic chuck with controls Over-the-wheel dressing attachment with automatic compensation Self-contained coolant system 5.5 HP spindle drive motor and electrical controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7274 when Inquiring
Asking Price: $sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 7270 , Year = 1973 , Make = ELB , Model = SW8VAII
Category:3 Axis Fully Automatic Surface Grinder
Capacity: 14” x 32” ELB Hydraulic Surface Grinder, Model SW8VAII
Ad #7270
Year:
1973
Make:
ELB
Model:
SW8VAII
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
9130 lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
New York
Country:
USA
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
14” x 32” ELB Hydraulic Surface Grinder, Model SW8VAII
Max. surface ground 14” x 32” Max. distance, spindle center to top of table 24” Table speed 3-90 F.P.M. Automatic cross-feed to table with continuous rapid traverse 47 I.P.M. Automatic cross-feed to table, intermittent, infinitely variable .04”-2.4” per stroke Cross-feed hand wheel graduation .001” Cross-fed fine adjustment .0005” Rapid traverse rate, vertical 6 I.P.M. Vertical feed hand wheel graduation .00005” Automatic incremental down feed rate, infinitely variable .0001”-.0025” Grinding wheel size 11 ¾” dia. x 2” width x 3” bore
EQUIPPED WITH:
Electromechanically actuated incremental down-feed or grinding wheel hand in pre-set increments at each saddle reversal for surface grinding or at each table reversal for plunge, face and slot grinding. At conclusion of down-feed cycle automatic return of grinding wheel hand and spark-out of grinding wheel. Motorized power rapid wheel hand positioning Electric straight dressing with 2 speeds and auto. Diamond down-feed Hydraulic table traverse with adjustable stops
Electro-mechanical cross feed ( accomplished by movement of the wheel head column) with cross travel adjustment from front of machine Hand wheels for manual operation 13 ¾” x 31 ½” Electro-magnetic chuck with Neutrofier control (1)Wheel mounts Grinding wheels External coolant pump and tank with TORIT dust collector 6.7/8 H.P. 3/60/220 Volt spindle drive Motor and electrical controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7270 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 7278 , Year = , Make = K.O. LEE , Model = #B360
Category:Tool & Cutter Grinders
Capacity:
Ad #7278
Year:
Make:
K.O. LEE
Model:
#B360
Condition:
Demo Machine
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
560 lbs.
Dimension: L x W x H
37" x 32" x 63.75"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
#B360 K.O. LEE Universal “Plainsman Series” tool and cutter grinder, “Never used”
Swing over table 8 1/4" Maximum distance between tailstocks 17" Distance between centers mounted in B943 and tailstock 11" Distance between collet in B943 and tailstock 12" Distance between B946 chuck face and tailstock 10 1/2" Table working surface 3 5/8" x 22 1/3" Sub table 6 1/8" x 26 1/4" Total cross feed and feed each rev. of handwheel 4 3/4"-.100" Table traverse 10" Fast feed per rev. of crank 2 3/4" Slow-feed per rev. of crank 15/16" Minimum distance centerline of wheel shaft to table 3 3/4" Maximum distance centerline of wheel shaft to table 10 3/4" Maximum distance from column to outside of straightwheel dovetail slide not extended, spindle 90° to table 3 3/4" Maximum distance from column to outside of straight wheel dovetail slide extended, spindle 90°to table 9 15/16" Centerline height of fixtures to top of table 4.130" Table T-slot 7/16" Table swivels 225° Wheelhead swivel 360° Column diameter 4" Vertical movement of column, each rev. 7"-.040" Motor speed 3450 RPM Spindle speed range 3450-18,400 RPM Grinding wheel hole size 5/8"
EQUIPPED WITH:
Swivel table B955 Universal grinding head with right hand threads, guards, belts, pulleys, wheels, mounts, etc. B922L + R set of foot stocks B827 plain tooth rest EB467 Diamond dresser, table mounted BA940 universal tooth rest B939 center gauge Precision angle bracket Way lubricant Work light 1/2 H.P. main spindle drive, 3450 RPM
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7278 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1986 Make - KIKINDA Model - URB 1000A
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7273 , Year = 1986 , Make = KIKINDA , Model = URB 1000A
Category:Surface Grinders
Capacity: 12”x40” KIKINDA Hydraulic Surface Grinder, automatic incremental down
Ad #7273
Year:
1986
Make:
KIKINDA
Model:
URB 1000A
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
6,500 lbs.
Dimension: L x W x H
146" x 57" x 96.5"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$SOLD USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
12” x 40” KIKINDA Hydraulic Surface Grinder with automatic incremental downfeed, Mdl. URB 1000A
Work table area 11.8” x 59” Max. grinding length 40” Max. grinding width 12” Max. distance from centerline of spindle to top of work table 19.7” Max. cross travel of work table 12” Cross feed range .08” to .800” Table speed range, longitudinal 6 to 75 FPM Grinding wheel size 12” dia. x 2” W x 5” bore Grinding wheel speed 1,500 RPM Downfeed handwheel graduated in increments to .0004” Fine downfeed adjustment in increments of .00008” Automatic incremental downfeed rate .0002” to .0008”
EQUIPPED WITH:
Hydraulically actuated longitudinal table travel with manual movement accomplished by menas of a handwheel engaging a pinion in to a rack fixed to the table Electromechanically actuated cross feed Hardened and ground longitudinal and cross ways. One way on the cross feed ways is flat with with the other being a “V” way. The longitudinal ways are both flat. Both sets of way hold caged ball bearings to give accurate and effortless movement. Wheelslide mounted in anti-friction needle bearings mounted in bearing cages Electromechanically actuated incremental downfeed of grinding wheelhead Automatic grinding cycle providing for coarse downfeed to the wheel followed by a fine downfeed and wheel sparkout. Wheelhead return at the end of the grinding cycle is operator controlled. Automatic downfeed actuated at either end of the hydraulic feed or at the end of outward cross feed only. Motorized power rapid traverse to grinding wheelhead. Over-the-wheel manual dressing attachment with automatic compensation 12” x 40” Electromagnetic chuck with control (1) Wheel flange Self-contained hydraulics External coolant pump and tank with magnetic separator 5.5 H.P. spindle drive motor Dual voltage electrics
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7273 when Inquiring
Asking Price: $SOLD
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 7275 , Year = 1975 , Make = GARDNER , Model = 1236
Category:Surface Grinders
Capacity: 12" x 36" GARDNER 2-Axis Hydraulic Surface Grinder, Model 1236
Ad #7275
Year:
1975
Make:
GARDNER
Model:
1236
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
8,500 lbs.
Dimension: L x W x H
109" x 82" x 100"
Machine Location:
City:
On Request
State:
Pennsylvania
Country:
USA
Price:
$sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
12" x 36" GARDNER 2-Axis Hydraulic Surface Grinder, Model 1236
Work table capacity 12" x 36" Table travel: Power feed 43" Hand feed 45" Table speed range 0 to 100 FPM Saddle cross travel 13-1/2" Cross feed increments 0.016" to 0.375" Max. distance, wheel to table 16" Max. distance under wheel to chuck 13" Standard wheel size 12"Dia. x 2" Wide x 3" Bore Power elevation rate to wheel 40 IPM Spindle speed 1800 RPM Approx. Maximum Height under New Wheel 9" to 10"
Equipped with:
Power elevation to wheel Hand or power operation 2-axes hydraulic operation (3) wheel mounts Bijur auto. lubrication Hardened and ground steel ball bearing mounted bed ways 12" x 36" Electro Magnetic chuck, Coarse Pole, Mfg. Inter-Lok Wheel dresser diamond not built in Neutrofier Vari-Power Chuck Control Tra Vatrol Control, Type #1RL53 Controls for: Table Manual or Auto Saddle Manual or Auto Wheel Head Rise & Lower Dresser Feed On & Off Separate Coolant Tank & Pump - No filter System Table Left End Spark Guard (2) Adjustable Table Stops 3 HP Hydraulic System 5 H.P., 3 Phase, 60 Cycle, 230-460 Volt Spindle Drive Motor
Hydraulic System: 28" LR x 52" FB x 39" H Coolant Tank: 20" LR x 43" FB x 26" H
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7275 when Inquiring
Asking Price: $sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1967 Make - WARNER & SWASEY/NORTON Model - 2-20-8
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7263 , Year = 1967 , Make = WARNER & SWASEY/NORTON , Model = 2-20-8
Category:Centerless Grinders
Capacity: No. 2-20-8 WARNER & SWASEY/NORTON Straddle Bearing Centerless Grinder
Ad #7263
Year:
1967
Make:
WARNER & SWASEY/NORTON
Model:
2-20-8
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
10,000 lbs.
Dimension: L x W x H
97.5" x 94.5" x 77"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
No. 2-20-8 WARNER & SWASEY/NORTON Straddle Bearing Centerless Grinder with Plunge Feed and Automatic Cycle Control
Cap. - standard work rest: 1/16" to 3" dia. Cap. - low thru feed work rest: 2" to 4-3/4" dia. Max. grinding wheel width: 8" x 12" hole Max. grinding wheel diameter: 20" Min. grinding wheel diameter: 14" Max. regulating wheel width: 8" x 5" hole Max. regulating wheel diameter: 12" Min. regulating wheel diameter: 8-1/2" Infinite regulating wheel speeds: 8 to 72 RPM "Click-count" wheel feed index calibrated in increments of: .000025" Grinding wheel speed: 8500 SFPM
EQUIPPED WITH:
Automatic plunge feed arrangement with single cycle lever control providing rapid approach by hydraulic cylinder, (stroke adjustable from 0 to 3"), automatic cushioning, adjustable automatic rotating feed screw type grinding wheel feed, adjustable timer for automatic dwell and cycle control, selector switch for manual control, and automatic rapid wheel head retraction. Automatic wheel wear compensation for grinding wheel Automatic wheel contact accelerator Norton automatic wheel balancing Variable speed regulating wheel drive Norton Dyna-tru automatic diamond roll wheel-head-mounted truing device with diamond Automatic hydraulic regulating wheel truing device Work taper adjustment Hydraulic rapid traverse Fine feed attachment Counter and timer Automatic grinding cycle control Automatic lubrication system Standard automatic combination thru feed and infeed device Low-rest combination thru feed and infeed device Plain thru feed and infeed work rest blades Carbide thru feed and infeed work rest blades Click count wheel feed index mechanism (1) Wheel lifter (7) Grinding wheel sleeves (4) 20" x 8" Grinding wheels (1) Regulating wheel with sleeve Splash guards, coolant pump with tank 1/4 H.P. coolant pump 1 H.P. 3/60/220-440 volt truing motor 1-1/2 H.P. 3/60/230-460 volt regulating wheel drive motor 20 H.P. 3/60/220-440 volt, 1760 RPM grinding wheel drive motor w/controls Purchased from U.S. Government Surplus
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7263 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7281 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
We found 11 matching ads. Now displaying the remaining 11 ads.
FOR SALE: Year - 1997 Make - Agie/Elox Model - Mondo 30
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6949 , Year = 1997 , Make = Agie/Elox , Model = Mondo 30
Category:RAM / Conventional EDM Machines
Capacity: Agie/Elox, Mondo 30, 3-axis Ram CNC Electrical Discharge Machine
Ad #6949
Year:
1997
Make:
Agie/Elox
Model:
Mondo 30
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
4,325 lbs.
Dimension: L x W x H
90" x 61" x 90"
Machine Location:
City:
On Request
State:
Michigan
Country:
USA
Price:
$SOLD USD
General Description
Agie/Elox, Mondo 30, 3-axis Ram CNC Electrical Discharge Machine
SPECIFICATIONS: • Work Table (L x W)………………………………25.6" x 20' • Maximum Part Weight……………………………1000 lbs • Maximum Open Height……………………………22.2" • Travels (x, y, z)…………………………………14" x 12'' x 9.8" • Work Tank (L x W x H)………………………35.8" x 26.7" x 15.7'' • Electrical Requirements…………………190, 208, 230, 250, 400, 415, 460, 500V / 3Ph / 50/60 Hz • Service Requirements…………………………Water & Air • Dielectric Capacity……………………………140 Gallons
EQUIPPED WITH: • Complete Dielectric Coolant and Filtration System • Agie/Elox 3-axis, 50 Amp Controller with CRT, Futura III 2PM, SN AF 1112PM000014 • Hand Pendant Controls • Manual
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
SPECIFICATIONS: Travels (XxYxZ) . . . . . . .11.8" x 9.8" x 9.8" Tank Size (WxDxH) . . . . . . 23.6" x 15.7" x 7" Table Size (WxD) . . . . . . . . .15.7" x 11.8" Maximum Workpiece Weight (Lbs) . . . . 441 Distance Ram Platen to Table (Max) . . . . .15.3" Overall Dimensions (WxDxH) : Tool (WxDxH) . . . . . . . . . 54" x 52" x 95" Controller (WxDxH) . . . . . . 26" x 25" x 75" Approximate Weight: Tool (Lbs) . . . . . . . . . . 2100 Controller (lbs) . . . . . . . . .595 Electrical Requirements (V,Hz,Ph): . . . 380,60,3 Service requirements : . . . . .Water & 6 Bar Air
EQUIPPED WITH: • Complete Dielectric and Filtration System • Charmilles 32 Amp Power Supply (No 'C' Axis) • 4 Position Mecatool Tool Changer • 6" x 12" Magnetic Chuck • Power Transformer
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6931 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Sokki DU1003 3-Axis DRO 20 Amp Power supply 29.5" x 18.9" x 11.8" Tank Dimensions 19.7" x 11.8" Work Table 11.8" x 7.9" X-Y Travels 1,100 lbs Max. Workpiece Weight 7.9" Quill Stroke 20.9" Distance from table to electrode holder plate 132 lbs. Maximum electrode load Anti-arc device Auto fire extinguisher Pulse-pressure-vacuum flushing Micrometer depth gauge Worklight 5,719 Hours of Work Time
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6824 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 6699 , Year = 1996 , Make = OMEGA , Model = 405-D
Category:RAM / Conventional EDM Machines
Capacity: OMEGA 405-D CNC Ram type EDM Machine
Ad #6699
Year:
1996
Make:
OMEGA
Model:
405-D
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
7,900 lbs
Dimension: L x W x H
60" x 40" x 82"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
OMEGA 405-D CNC Ram type EDM Machine
Work table size 17.7” x 9.8” Work tank internal dimensions 32.7” x17.7” x 11” Fluid level adjusting range 5.7”-11.4” X-axis travel 9.8” Y-axis travel 5.9” Z-axis travel 8.6” Distance from top of work table to surface of electrode holder 17.3” Electrode holder dimensions 5.5” x 5.5” Distance from floor to work table top 34” Z axis servo mode DC Servo Max. weight of electrode 110 lbs Max. weight of work piece 1100 lbs Dielectric tank capacity 500 liters Max. machining current 30 amps
EQUIPPED WITH:
2- paper core fluid filtration mode Submersive type tank Electrode holder Head depth measuring device Sparkmaster Micro-computer current pulse generator control Input total power 4 KVA
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6699 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1994 Make - HANSVEDT Model - CS-20 Tradesman
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6585 , Year = 1994 , Make = HANSVEDT , Model = CS-20 Tradesman
Category:RAM / Conventional EDM Machines
Capacity: HANSVEDT EDM, Model CS-20 Tradesman w/Gromax COC-200A III CNC Orbitor
Ad #6585
Year:
1994
Make:
HANSVEDT
Model:
CS-20 Tradesman
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
General Description
HANSVEDT “Conventional” Ram Type EDM, Model CS-20 Tradesman w/”Gromax” Model #COC-200A III CNC Orbitor System
Work table size 20” x 12” Table travel 13” x 10” Work tank size 35.5” x 20.5” x 13” Deep Platen to table 18” Max Ram travel 8” Platen size 5.75” x 4” Max. Electrode weight 75 lbs. Max. Work piece weight 500 lbs. Work tank capacity 18 gals. Reservoir capacity 45 gals.
MACHINE FEATURES:
Hansvedt “H-Pulse” 201E ( S/N AP17955) 30 amp power supply on separate roll around stand SM155 Booster Module, 30 amp, 1/60/234 Volts, S/N A17720 Simple, Understandable spark & servo controls “Servo Controls” featuring dither, manual, edge finder, auto retract, auto lock, orbit stop, orbit lock, servo speed & gap adjust “EDM Controls” low peak current, ARC Duration (.5 to 1843 microseconds), peak current, polarity, electrode materials & % on-time selections for ultra-fine finishing DC Servo & ballscrew drive for ram Ram cycler provides up/down movement to promote blind cavity flush “Gap Monitor” automatic DC ARC protection system Micrometer down stop w/ automatic retraction
EQUIPPED WITH:
“Gromax” CNC Orbicut Model #COC-200A III, S/N 47520875 Two-axis CNC Dial indicators for each axes 30 lbs. max. electrode weight “ACU-RITE” “Master G” 3-axis digital readout display “ACU-RITE” Scales with .0001” resolution 8” x 12” “TAFT PEIRCE” Fine-division permanent magnetic chuck (1)20mm Electrode holder Mfg. By “Sunspot” mounted to a low profile adapter plate Work light Electrode tooling with electrodes Documentation for the Hansvedt EDM Machine & power supply, the Gromax CNC Orbitor & the ACU-RITE D.R.O.
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1996 Make - Agie Mondo Model - Futura III
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7488 , Year = 1996 , Make = Agie Mondo , Model = Futura III
Category:RAM / Conventional EDM Machines
Capacity: 1996 Agie Mondo Futura III
Ad #7488
Year:
1996
Make:
Agie Mondo
Model:
Futura III
Condition:
Excellent
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
Amp 15" x 12" x 8.5" Travels Oversize Tank Hi POL Floppy Low Hours Excellent Condition Under Power!!!
Full Machine Specifications
40 AMP X =15.0", Y=12.0", Z=8.5" (Approx) Special Options Include Oversize tank for large jobs or multiple set-ups Hi POL Floppy Disc Reader Equipped With 3R ttoling and Haas Index Head which are available, but not included in the price Low hours, well maintained
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year -Make - SUPERIOR Model - 3VB/HD-10
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6632 , Year = , Make = SUPERIOR , Model = 3VB/HD-10
Category:Horizontal and Vertical Hones
Capacity: SUPERIOR MODEL 3VB/HD-10 VERTICAL HONE
Ad #6632
Year:
Make:
SUPERIOR
Model:
3VB/HD-10
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
6,000 LBS.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Texas
Country:
USA
Price:
$SOLD USD
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item
General Description
SUPERIOR MODEL 3VB/HD-10 VERTICAL HONE
HEAVY DUTY FULLY AUTOMATIC OPERATION AFTER INITIAL SET-UP DIAMETER CAPACITY: UP TO 10" LENGTH CAPACITY: 36" STROKE: 60" TABLE SIZE: 18" X 24" DISTANCE, FLOOR TO TABLE TOP: 8" MOTOR: 3 HP EQUIPPED WITH: FREE STANDING HYDRAULIC POWER UNIT DWELL/CYCLE TIMER STOP FEED (EXPANSION) SPARKOUT SYSTEM AUTO SIZING CONTROL CONSULE 8" 3-JAW CHUCK 24" EXTENSION WORK TABLE OAD: 54" L-R X 57" F-B X 124" HIGH - MACHINE 28" L-R X 18" F-B X 31" HIGH - HYDRUALIC UNIT 36" L-R X 24" F-B X 56" HIGH - CONTROL CABINET
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6632 when Inquiring
Asking Price: $SOLD
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
BARNES MODEL 5E HYDRAULIC HORIZONTAL ---EXTERNAL HONING MACHINE-- ONLY
SWING: NOT LESS THAN 12" DIAMETER HONING CAPACITY: UP TO 6" DIAMETER LENGTH OF STROKE, ADJUSTABLE (CARRIAGE TRAVEL): 2" - 12' RATE OF CARRIAGE TRAVEL: 10 - 100 FPM SPINDLE SPEEDS (VAR): 50 TO 473 RPM CAPACITY BETWEEN CENTERS: 2' - 12' SPINDLE TAPER: NO. 5 MT RESERVOIR CAPACITY: 80 GALLONS MINIMUM 100 GALLONS MAXIMUM MOTORS: 15 HP MAIN DRIVE 15 HP HYDRAULIC 3/4 HP COOLANT PUMP EQUIPPED WITH: OPERATOR CONTROL STATION COOLANT SYSTEM WITH MAGNETIC & FABRIC FILTRATION OAD: 248: L-R X 66" F-B X 61" HIGH - MACHINE 93" L-R X 16" F-B X 75" HIGH - ELECTRICAL CABINET 71" L-R X32" F-B X 68" HIGH - HYDRAULIC UNIT 77" L-R X 57" F-B X 70" HIGH - COOLANT/FILTRATION UNIT NOTE - MACHINE IS IN EXCELLENT CONDIJTION. FROM U.S. GOVERNMENT RESERVE.
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year -Make - SAMPUTENSILLI Model - SCT-3
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6024 , Year = , Make = SAMPUTENSILLI , Model = SCT-3
Category:Gear Shapers
Capacity: SAMPUTENSILLI Model SCT-3 Gear Chamfer Machines
Ad #6024
Year:
Make:
SAMPUTENSILLI
Model:
SCT-3
Condition:
Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
3,304 lbs.
Dimension: L x W x H
6.4' x 3.1' x 6.2'
Machine Location:
City:
On Request
State:
North Carolina
Country:
USA
Price:
$sold USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
AB Panelview 900 The Samputensili Chamferer and Deburrer is a universal style machine for shafts and gears. SPECIFICATIONS: Max. Workpiece Diameter .98"-13.78" Max. Module 3.175 DP Face Width Range .157"-4.134" Max. Workpiece Length - with gearing in center of workpiece 29.53" - with gearing at one end of workpiece 19.69" Tool Spindle drive Output, Approx. 2 HP Total Connected Load of Machine 5-8 HP Compressed Air Pressure 5 Bar Compressed Air Consumption, approx. 50-70 l/min.
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6024 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6025 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6971 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6970 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1968 Make - PACIFIC Model - 750R-10
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6969 , Year = 1968 , Make = PACIFIC , Model = 750R-10
Category:Power Squaring Shear (Hydraulic)
Capacity: USED 10' X 3/4" PACIFIC MODEL 750R-10 HYDRAULIC PLATE SHEAR
Ad #6969
Year:
1968
Make:
PACIFIC
Model:
750R-10
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
52,000 LBS.
Dimension: L x W x H
12'6" x 8'6" x 10'
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item
General Description
USED 10' X 3/4" PACIFIC MODEL 750R-10 HYDRAULIC PLATE SHEAR
RATED CAPACITY: MILD STEEL PLATE CONT. RATED CAPACITY - 3/4"X10' MAXIMUM MILD STEEL PLATE CAPACITY - 1" X 10' MAXIMUM STAINLESS STEEL PLATE CAP. - 3/4" X 10' MAXIMUM SHEAR LENGTH: 10' EQUIPPED WITH: FRONT OPERATED POWER BACK GAUGE (12) FRONT HOLD DOWNS SQUARING ARM (2) STOCK SUPPORTS (1) EXTRA SET SHEAR BLADES
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6969 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 6946 , Year = 1981 , Make = HTC , Model = 500-10
Category:Power Squaring Shear (Hydraulic)
Capacity: HTC MODEL 500-10 HYDRAULIC SHEAR
Ad #6946
Year:
1981
Make:
HTC
Model:
500-10
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
20,000 lbs.
Dimension: L x W x H
153" x 104" x 104"
Machine Location:
City:
On Request
State:
Illinois
Country:
USA
Price:
$SOLD USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
HTC MODEL 500-10 HYDRAULIC SHEAR
Capacity: 10' x 1/2" Mild Steel Distance Between Housings: 10'4" Speeds: 123 IPM - Down 192 IPM - Up Number of SPM (Full Width Cut): 9.5 Number of Holddown Cylinders: 11 Rake Angle: 1/2" per Foot All Steel Construction
EQUIPPED WITH:
36" Front Operated Power Back Gauge (2) Front Support Arms (1) Pair 4-Edge Knives 40 HP AC Main Drive (Pump) Motor DC Backgauge Motor Electrical Controls Electric Foot Switch Operation
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6946 when Inquiring
Asking Price: $SOLD
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 6941 , Year = 1985 , Make = AMADA , Model = M3045
Category:Power Squaring Shear (Mechanical)
Capacity: AMADA MODEL M3045 MECHANICAL SQUARING SHEAR
Ad #6941
Year:
1985
Make:
AMADA
Model:
M3045
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
16,000 lbs.
Dimension: L x W x H
167" x 76" x 62"
Machine Location:
City:
On Request
State:
Illinois
Country:
USA
Price:
$SOLD USD
Buyers Premium: A 7 % Buyers Premium applies to the final sale price of this item
General Description
AMADA MODEL M3045 MECHANICAL SQUARING SHEAR
Capacity: 10' x .180" (Mild Steel) Rake Angle Taper Per Foot: 1 Degree/18 Minutes Gap: 11.8" Speed: 60 SPM (Full Length Cuts) Distance Bed to Floor: 32.5" Hydraulic Holddowns Electromagnetic Clutch Stroke Cycle Selector Blade Clearance & Lower Blade Height Adjustment All Steel Frame Construction
EQUIPPED WITH:
36" Programmable Front Operated Power Back Gauge 11' Squaring Arm (2) Front Support Arms (1) Pair 4-Edge Blades One-Shot Lubrication System 10 HP AC Main Drive Motor; Electrical Controls Electric Foot Switch Operation Combination Holddown & Knife Guard
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6941 when Inquiring
Asking Price: $SOLD
Buyers Premium:A 7 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1984 Make - WYSONG & MILES Model - 1025
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6943 , Year = 1984 , Make = WYSONG & MILES , Model = 1025
Category:Power Squaring Shear (Mechanical)
Capacity: WYSONG & MILES MODEL 1025 MECHANICAL POWER SQUARING SHEAR
Ad #6943
Year:
1984
Make:
WYSONG & MILES
Model:
1025
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
20,000 lbs.
Dimension: L x W x H
200" x 105" x 60"
Machine Location:
City:
On Request
State:
Illinois
Country:
USA
Price:
$SOLD USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
WYSONG & MILES MODEL 1025 MECHANICAL POWER SQUARING SHEAR
Capacity: 10' x 1/4" (Mild Steel); 10' x 7 Ga. (Stainless) Overall Length of Knives: 124" Rake of Upper Blade: 3/8" Speed: 55 SPM Air Actuated Mechanical Clutch Optional Single Stroke or Continuous Operation Full Length T-Slot Across Bed Face Self-Compensating, Cam Operated Power Holddowns
EQUIPPED WITH:
Wysong Power Operated Computerized LED Gauging System 36" Power Back Gauge 48" Power Front Gauge Squaring Arm (9 Ft. Long) (2) Front Support Arms (1) Pair 4-Edge Knives Bijur Automatic Lubrication System Knife and Holddown Guard 10 HP AC Main Drive Motor Electrical Controls Electric Foot Switch Operation Rack with Extra Set of Blades
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6943 when Inquiring
Asking Price: $SOLD
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1995 Make - LVD Model - HST-E 50/10
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6945 , Year = 1995 , Make = LVD , Model = HST-E 50/10
Category:Power Squaring Shear (Hydraulic)
Capacity: LVD MODEL HST-E 50/10 HYDRAULIC POWER SHEAR
Ad #6945
Year:
1995
Make:
LVD
Model:
HST-E 50/10
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
25,000 lbs.
Dimension: L x W x H
160" x 96" x 88"
Machine Location:
City:
On Request
State:
Illinois
Country:
USA
Price:
$Sold USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
LVD MODEL HST-E 50/10 HYDRAULIC POWER SHEAR
Capacity: 10' x 1/2" (Mild Steel) Overall Length of Blades: 123" Distance Table to Floor: 39-1/2" Self-Compensating Hydraulic Holddowns All Steel Welded Frame Construction
EQUIPPED WITH:
LVD MNC-10 CNC Control Pneumatic Sheet Holder (Rear Mounted) Moveable Scrap Bin 40" Front Operated Power Back Gauge (1) Pair 4-Edge Knives (1) Extra Set of New Knives 12 Ft. Squaring Arm (2) Front Support Arms AC Main (Pump) Drive Motor Electrical Controls Self-Contained Hydraulic Power System Electric Foot Switch Operation
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6945 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1995 Make - BETENBENDER Model - 6-250
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6658 , Year = 1995 , Make = BETENBENDER , Model = 6-250
Category:Power Squaring Shear (Hydraulic)
Capacity: 6’ x ¼” BETENBENDER Hydraulic Shear
Ad #6658
Year:
1995
Make:
BETENBENDER
Model:
6-250
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
8500 lbs.
Dimension: L x W x H
108" x 85.5" x 61"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
6’ x ¼” BETENBENDER Hydraulic Shear
Shearing length 72” Shearing capacity, mild steel ¼” Blade size 1” x 4” Table height 32” Length of blades 76” Rake angle per rated capacity ¼” Speed 19 SPM Number of hold downs 13
EQUIPPED WITH:
36” cap. front operated power back gage 48” R.H. Squaring arm Rear scrap chute Remote foot pedal control Production counter Work light 15 H.P. Motor and controls AC Electrics
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: 30 day satisfaction guarantee, buyer pays freight , buyer inspection encouraged.
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6658 when Inquiring
Asking Price: $sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 6629 , Year = 1975 , Make = HTC , Model = 250-10A
Category:Power Squaring Shear (Hydraulic)
Capacity: 10' X 1/4" HTC MODEL 250-10A POWER SQUARING SHEAR
Ad #6629
Year:
1975
Make:
HTC
Model:
250-10A
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
14,000 LBS.
Dimension: L x W x H
146" x 80" x 87"
Machine Location:
City:
On Request
State:
Texas
Country:
USA
Price:
$sold USD
General Description
10' X 1/4" HTC MODEL 250-10A POWER SQUARING SHEAR
CAPACITY: 1/4" CUTTING WIDTH: 124" DECK HEIGHT: 32" BLADE SIZE: 1" X 3" RAKE ANGLE/FOOT: 11/32" NUMBER OF HOLDDOWNS: 9 CYCLES: 23 - FULL WIDTH CUT 38 - HALF WIDTH CUT 69 - 12" CUT SPEED: 220 IPM DOWN 293 IPM UP MOTOR: 25 HP EQUIPPED WITH: 36" FRONT OPERATED POWER BACKGAUGE-needs work 4' SQUARING ARM SHADOW LIGHT SWING ARM BACK STOP 4-WAY BLADES STROKE LENGTH CONTROL FOOT PEDAL
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 6530 , Year = , Make = CINCINNATI , Model = 10014
Category:Power Squaring Shear (Mechanical)
Capacity: 14' X 1´´ CINCINNATI POWER SQUARING SHEAR
Ad #6530
Year:
Make:
CINCINNATI
Model:
10014
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Ohio
Country:
USA
Price:
$sold USD
General Description
14' X 1´´ CINCINNATI POWER SQUARING SHEAR:
CAPACITY ......................... 1´´ OVERALL LENGTH OF BLADES ......... 14'5´´ DISTANCE BETWEEN HOUSING ......... 14'3´´ DEPTH OF GAP ..................... 24´´ FRONT OPERATED POWER BACKGUAGES .. 48´´ STROKES PER MINUTE ............... 20 HYDRAULIC HOLD DOWNS ............. YES SQUARING ARM ..................... 10' DUAL PALM BUTTONS ................ YES MOTOR ............................ 50 HORSEPOWER
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 6518 , Year = , Make = COLUMBIA , Model = 806
Category:Power Squaring Shear (Mechanical)
Capacity: 6' X 1/2´´ COLUMBIA POWER SQUARING SHEAR
Ad #6518
Year:
Make:
COLUMBIA
Model:
806
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
19,350 lbs
Dimension: L x W x H
10'6" x 8' x 7'4"
Machine Location:
City:
On Request
State:
Ohio
Country:
USA
Price:
$SOLD USD
General Description
6' X 1/2´´ COLUMBIA POWER SQUARING SHEAR:
CAPACITY ........................... 1/2´´ LENGTH OF BLADES ................... 76´´ DISTANCE BETWEEN HOUSINGS........... 6'4´´ FRONT OPERATED BACK GAUGE .......... 36´´ STROKES PER MINUTE ................. 40 DEPTH OF GAP ....................... 18´´ SQUARING ARM ....................... 48´´ AIR CLUTCH ......................... YES FLOOR STANDING ..................... YES MOTOR .............................. 15 HORSEPOWER
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 6519 , Year = 1988 , Make = WYSONG , Model = 1025
Category:Power Squaring Shear (Hydraulic)
Capacity: 10' X 1/4´´ WYSONG POWER SQUARING SHEAR
Ad #6519
Year:
1988
Make:
WYSONG
Model:
1025
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Ohio
Country:
USA
Price:
$Sold USD
General Description
10' X 1/4´´ WYSONG POWER SQUARING SHEAR:
CAPACITY .......................... 1/4´´ FRONT OPERATED POWER BACKGUAGES ... 36´´ (PC 100 CONTROL) SQUARING ARM ...................... 10' FRONT ARM SUPPORTS ................ (3) HYDRAULIC HOLDDOWNS ............... 16 FLOOR TO TOP OF TABLE ............. 32´´ BIJUR LUBE ........................ YES BACK GUAGE MOTOR .................. 3/4 HORSEPOWER MAIN MOTOR ........................ 15 HORSEPOWER
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1970 Make - CINCINNATI Model - 2512
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6528 , Year = 1970 , Make = CINCINNATI , Model = 2512
Category:Power Squaring Shear (Mechanical)
Capacity: 12' X 3/8´´ CINCINNATI POWER SQUARING SHEAR
Ad #6528
Year:
1970
Make:
CINCINNATI
Model:
2512
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Ohio
Country:
USA
Price:
$Sold USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
12' X 3/8´´ CINCINNATI POWER SQUARING SHEAR:
CAPACITY .......................... 3/8´´ LENGTH OF BLADES .................. 12'3´´ FRONT OPERATED POWER BACK GAUGE ... 48´´ DEPTH OF GAP ...................... 19-1/4´´ STROKES PER MINUTE ................ 50 HYDRAULIC HOLDDOWNS ............... YES LIGHT BEAM SHEARING ............... YES MOTOR ............................. 15 HORSEPOWER
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6528 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1979 Make - LODGE & SHIPLEY Model - 308
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6219 , Year = 1979 , Make = LODGE & SHIPLEY , Model = 308
Category:Power Squaring Shear (Mechanical)
Capacity: 8' x 3/16" Lodge & Shipley Mechanical Shear, Model 0308
Ad #6219
Year:
1979
Make:
LODGE & SHIPLEY
Model:
308
Condition:
Excellent
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
14,000 Lbs.
Dimension: L x W x H
133" x 75" x 68"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
8' x 3/16" Lodge & Shipley Mechanical Shear, Model 0308
Flush floor design, no pit required Capacity in mild steel: 3/16" x 8' Distance between housings: 8'4" Blade size (4 edge): 1" x 4" x 100" Blade rake per foot: 1/4" Speed: 60 SPM Hold down pressure: 5 1/2 Tons Hold down to cutting edge - adjustable: 5/8" to 1 5/8" Throat depth: 18" Back gauge range: 36" Front gauge range: 50" Floor to top of table: 32" Centers of hold downs: 11 1/2"
Equipped With: 36" Capacity front operated motorized back gauge (2) Front arms (1) Set of blades Air clutch w/spring brake Remote electric foot pedal control Hydraulic hold-downs Automatic pressure lubrication Variable blade clearance adjustment Ram counter balances 5 H.P. 3/60/208-220-440 Volt motor and controls
Floor Space: (without arms) 133"LR x 75"FB x 68"High
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6219 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1962 Make - LODGE & SHIPLEY Model - 0810-SL
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6220 , Year = 1962 , Make = LODGE & SHIPLEY , Model = 0810-SL
Category:Power Squaring Shear (Mechanical)
Capacity: 10’ x 1/2" LODGE & SHIPLEY Mechanical Shear with air clutch, Mdl. 0810
Ad #6220
Year:
1962
Make:
LODGE & SHIPLEY
Model:
0810-SL
Condition:
Very Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
37,500 lbs.
Dimension: L x W x H
167" x 97" x 82"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item
General Description
10’ x 1/2" LODGE & SHIPLEY Mechanical Shear with air clutch, Mdl. 0810-SL
Requires 3 1/4" depth pit for apron
Capacity, mild steel 1/2" x 10' Distance between housings 10’ 4" Blade size (4 edge) 1 1/8" x 5" x 124" Blade rake per foot 3/8" Speed 40 SPM Total hold-down pressure 18 1/2 Tons Hold-downs to cutting edge adjustable 1 1/8"-2" Gap 18" Back gauge range 48"
EQUIPPED WITH:
48" capacity front operated motorized back gauge (2) front arm extensions (36") 10’ L.H. squaring arm Extra set of blades Light beam shearing gauge Ram counter balances Variable blade clearance adjustment with indicators Air clutch with spring brake Hydro-pneumatic hold-down system Built-in ball transfers in table Inclined slide in rear for scrap Automatic pressure lubrication Remote electric foot pedal control 15 H.P. 3/60/220-440 volt motor with controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6220 when Inquiring
Asking Price: $sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1973 Make - CINCINNATI Model - 1810
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7691 , Year = 1973 , Make = CINCINNATI , Model = 1810
Category:Power Squaring Shear (Mechanical)
Capacity: 10' X 1/4´´ CINCINNATI POWER SQUARING SHEAR
Ad #7691
Year:
1973
Make:
CINCINNATI
Model:
1810
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Mid West
Country:
USA
Price:
$SOLD USD
General Description
10' X 1/4´´ CINCINNATI POWER SQUARING SHEAR
CAPACITY ............................. 1/4´´ LENGTH OF BLADES ..................... 10'4´´ FRONT OPERATED POWER BACK GAUGE ...... 36´´ DEPTH OF GAP ......................... 18´´ STROKES PER MINUTE ................... 60 AUTO LUBE ............................ YES HYDRAULIC HOLD DOWNS ................. 11 DISTANCE UNDER DOWN .................. 1/2´´ SQUARING ARM ......................... 48´´ FRONT ARM SUPPORT .................... YES FULL LENGTH FOOT TREADLE ............. YES MAIN MOTOR ........................... 7-1/2 HP
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7686 , Year = 1973 , Make = HTC , Model = 500-12AG
Category:Power Squaring Shear (Hydraulic)
Capacity: 12' X 1/2´´ HTC POWER HYDRAULIC SQUARING SHEAR
Ad #7686
Year:
1973
Make:
HTC
Model:
500-12AG
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Mid West
Country:
USA
Price:
$Sold USD
General Description
12' X 1/2´´ HTC POWER HYDRAULIC SQUARING SHEAR
CAPACITY ........................... 1/2´´ MILD STEEL OVERALL LENGTH OF BLADES ........... 148´´ FRONT OPERATED POWER BACK GAUGE .... 48´´ GAP ................................ 24´´ NUMBER OF HYDRAULIC HOLD DOWNS ..... 13 SWING AWAY BACK GAUGE .............. YES RAKE ANGLE ......................... 1/2´´ PER FOOT ELECTRIC FOOT TRIP ................. YES KNIVES SPEED DOWN .................. 120 IPM KNIVES SPEED RETURN ................ 180 IPM STROKES PER MINUTE ................. 8 FULL STROKE STROKES PER MINUTE ................. 12 HALF STROKE MAIN MOTOR ......................... 40 HORSEPOWER
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1984 Make - Cincinnati Model - 2CC10
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7499 , Year = 1984 , Make = Cincinnati , Model = 2CC10
Category:Power Squaring Shear (Mechanical)
Capacity: 1984 Cincinnati 2CC10 10' x 1/4" Mechanical Shear
Ad #7499
Year:
1984
Make:
Cincinnati
Model:
2CC10
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$SOLD USD
General Description
1984 Cincinnati 2CC10 Mechanical Power Squaring Shear 7.5 HP Strokes Per Min 60
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Capacity 1/4" Distance Between Housing 10'3" Back Gauge Range 0-36" Rake Taper Per Foot 1/4" Per Foot Strokes Per Minute 60 Hydraulic holdowns 11 Gap (Between Housing and Table) 4" Main Drive Motor 7.5 HP
Equipped With: Microcomputer Gauge Control (Front & Back Guages) (2) Cincinnati Front Gauge Arms 48" & 72" Continental Conveyor Capacity 20 Gauge 1/4" Conveyor Speed 1800 Per Min # of Conveyor Belts 5 Sheet Supports 18 Continental Sheet Stacker (3) Front Support Arms 4 Back Gage Probes for Automatic Operation Electric Foot Switch Automatic Pressure Lubrication Interlocked Steel Construction Light Bar Non Float Inclined Ram Main Motor 7.5 HP/3PH/60C
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Pendant Control with Sector Switch Rated Capacity 1"x16' Mild steel Tensile Strength 80,000 Ball Transfers in Table Fixed Rake Angle Power Adjustment of Blade Clearance 4 Sided Blades 26 Hydraulic Holdowns Manuals 4 Strokes Per Min Adjustable Control Moveable Foot Pedal Equipped With 13' Squaring Arm 48" Front Operated Power Back Guage Swing 75 HP 3" Leaf Plate
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7310 , Year = 1980 , Make = NIAGARA , Model = 31RC
Category:Foot Stomp & Air Operated Shear
Capacity: 10 Ga. Capacity NIAGARA Ring and Circle Cutting Shear, Model 31RC
Ad #7310
Year:
1980
Make:
NIAGARA
Model:
31RC
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
2,000 Lbs.
Dimension: L x W x H
136" x 20.5" x 53"
Machine Location:
City:
On Request
State:
New York
Country:
USA
Price:
$sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
10 Ga. Capacity NIAGARA Ring and Circle Cutting Shear, Model 31RC
Capacity in mild steel 10 gauge Minimum/Maximum circle diameter from square 6"/60" blanks Minimum/Maximum circle diameter from octagonal 6"/78" blanks Throat depth, cutters to frame 18-1/2" Throat of circle arm 43" Diameter of cutters 3" Circumferential speed of cutters 100 F.P.M.
EQUIPPED WITH:
Air actuated clamping device with dual electric push buttons for clamping and unclamping of circle arm Air actuated feed of cutting head with adjustable timer to control duration of cut Dual regulating valves for controlling clamping and feed pressure Key lock selector switch for hand/off/auto mode of operation Dual electric palm buttons to start cutting cycle Emergency stop button Manually adjustable cutter clearance Hand crank for positioning of circle arm on a rack in order to cut various diameters 3 H.P. 3/60/230-460 volt drive motor with electric brake and electrical control cabinet
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7310 when Inquiring
Asking Price: $sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7297 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1983 Make - BERTSCH Model - Series 500, Model 8-120
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7298 , Year = 1983 , Make = BERTSCH , Model = Series 500, Model 8-120
Category:Power Squaring Shear (Hydraulic)
Capacity: 10’ x 1/2” BERTSCH Series 500, Model 8-120, Hydraulic overdriven Shear
Ad #7298
Year:
1983
Make:
BERTSCH
Model:
Series 500, Model 8-120
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
26,000 lbs
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
10’ x 1/2” BERTSCH Series 500, Model 8-120, Hydraulic overdriven Shear
All steel construction, flush floor, no pit required Shearing length 120” Shearing capacity ½” mild steel Back gage range 48” Nominal rake ½” Number of hold-downs 10 Hold-down tonnage 40 Blade size 1” x 4” Ram speed down 1.82 in/sec. Ram speed up 4.6 in/sec. Cycles, full cut 10 Cycles, half width cut 19
EQUIPPED WITH:
48” 2-Speed front operated power back gage with display and swing away feature 4-edge blades 10’ R.H. Squaring arm with scale and stop 48” front arm extensions Adjustable of rake angle Manual blade clearance adjustment Remote electric foot pedal control Light beam shearing gage Built-in ball transfers in table Trabon one-shot lubrication 60”x 144”x 33” High portable steel work support table with built-in ball transfers and casters (front location) 40 HP 3/60/230-460 Volt Motor and controls
Dimensions: Shear only (does not include front arms): 163” LR x 115 ½”FB x 121”High
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7298 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
36” L.H. squaring arm (2) 36” front arms Motorized rear roller conveyor Extra blade Remote electric foot pedal Spring activated hold-downs Finger guard Built-in Single stroke/continuous cycle switch Air actuated clutch One-shot lubricator Non-metallic gibs 3 H.P. 3/60/230-460 Volt Motor w/controls
Floor specs: (without gauges) 48” x 93” x 52” High
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7299 when Inquiring
Asking Price: $SOLD
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7088 when Inquiring
Asking Price: $Sold
Buyers Premium:A 7 % Buyers Premium applies to the final sale price of this item
We found 25 matching ads. Now displaying the remaining 25 ads.
FOR SALE: Year - 1997 Make - LVD Model - 350BH15
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6929 , Year = 1997 , Make = LVD , Model = 350BH15
Category:Press Brakes (Hydraulic)
Capacity: LVD MODEL 350BH15 CNC HYDRAULIC PRESS BRAKE
Ad #6929
Year:
1997
Make:
LVD
Model:
350BH15
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
63,000 Lbs.
Dimension: L x W x H
195" x 102" x 141"
Machine Location:
City:
On Request
State:
Illinois
Country:
USA
Price:
$Sold USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
LVD MODEL 350BH15 CNC HYDRAULIC PRESS BRAKE
Capacity: 350 Ton Overall Length of Bed and Ram: 15' Distance Between Housings: 12'6" Stroke: 11.8" (Maximum) Open Height: 15.75" Throat Depth: 22.4" Speeds: 236 IPM - Advance 30 IPM - Pressing 283 IPM - Return Width of Bed Top: 10.6" All Steel Welded Construction Flush Floor Design
EQUIPPED WITH:
LVD Model MNC-95/C 5-Axis Control System 4-Axis Back Gauge Sectional Ram Clamps 60 HP AC Main (Pump) Drive Motor Self-Contained Hydraulic Power Unit Electrical Controls Sight Type Oil Level Gauge
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6929 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1990 Make - WYSONG Model - RT-140-122
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6927 , Year = 1990 , Make = WYSONG , Model = RT-140-122
Category:Press Brakes (Hydraulic)
Capacity: WYSONG MODEL RT-140-122 CNC HYDRAULIC PRESS BRAKE
Ad #6927
Year:
1990
Make:
WYSONG
Model:
RT-140-122
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
20,000 lbs.
Dimension: L x W x H
130" x 82" x 98"
Machine Location:
City:
On Request
State:
Illinois
Country:
USA
Price:
$sold USD
Buyers Premium: A 7 % Buyers Premium applies to the final sale price of this item
General Description
WYSONG MODEL RT-140-122 CNC HYDRAULIC PRESS BRAKE
Capacity: 140 Ton Overall Length of Bed & Ram: 10'2" Distance Between Housings: 8'6" Stroke: 8" Die Space: 17" Closed Height: 9" Throat Depth: 12" Distance Bed to Floor: 32" Speeds: 236 IPM - Advance 16 IPM - Pressing 155 IPM - Return Flush Floor Design Welded Steel Construction
EQUIPPED WITH:
Cybelec DNC 90 6-Axis CNC Control with Color Graphics Programmable 4-Axis Back Gauge Hydraulic Die Clamping (Ram and Bed) Automatic Lubrication System 10 HP AC Main (Pump) Drive Motor; Electrical Controls Dual Palm Button or Electric Foot Switch Operation
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6927 when Inquiring
Asking Price: $sold
Buyers Premium:A 7 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 6930 , Year = 2004 , Make = TRUMPF , Model = V320
Category:Press Brakes (Hydraulic)
Capacity: TRUMPF MODEL V320 CNC HYDRAULIC PRESS BRAKE
Ad #6930
Year:
2004
Make:
TRUMPF
Model:
V320
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
52,000 lbs.
Dimension: L x W x H
183" x 85" x 122"
Machine Location:
City:
On Request
State:
Illinois
Country:
USA
Price:
$Sold USD
General Description
TRUMPF MODEL V320 CNC HYDRAULIC PRESS BRAKE
Capacity: 357 Tons Maximum Bending Length: 13'4" Distance Between Housings: 12'1" Distance Floor to Bed: 41" Stroke (Adjustable): 14" Max. Open Height: 21" Throat: 16" Width of Bed: 8" Speeds: 354 IPM - Advance 2 - 24 IPM - Pressing 320 IPM - Return Flush Floor Design
EQUIPPED WITH:
TrumaBend 8-Axis Graphic 2-D CNC Control 4-Axis CNC Back Gauge Ram & Bed Power Die Clamps CNC Programmable Crowning CNC Programmable Die Shift Adjustable Front Supports & Sheet Lifter 50 HP Main Drive (Pump) Motor Electrical Controls Electric Foot Switch or Dual Palm Buttons Operation
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6928 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 6905 , Year = , Make = VERSON , Model = B-118-250
Category:Press Brakes (Mechanical)
Capacity: 250 TON VERSON 24´´ X 157´´ BED MECHANICAL POWER PRESS BRAKE
Ad #6905
Year:
Make:
VERSON
Model:
B-118-250
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Ohio
Country:
USA
Price:
$sold USD
General Description
250 TON VERSON 24´´ X 157´´ BED MECHANICAL POWER PRESS BRAKE
FLOOR STANDING .................... YES FLANGED BED AND RAM ............... YES CAPACITY .......................... 250 TON STROKE OF RAM ..................... 8´´ RAM ADJUSTMENT .................... 6´´ SHUT HEIGHT, SDAU ................. 22´´ AREA OF BED ....................... 157´´ X 24´´ AREA OF RAM ....................... 150´´ X 24´´ DISTANCE BETWEEN HOUSINGS ......... 102´´ STROKES PER MINUTE ................ 24 DEPTH OF THROAT ................... 13´´ DOUBLE BACK GEARED ................ YES MOTORIZED RAM ADJUSTMENT .......... YES AIR CLUTCH & BRAKE ................ YES AIR COUNTER BALANCE ............... YES MOTOR, HORSEPOWER ................. 25
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6906 when Inquiring
Asking Price: $sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 6421 , Year = , Make = DREIS & KRUMP , Model = 68B
Category:Press Brakes (Mechanical)
Capacity: 55 TON X 8' DREIS & KRUMP BRAKE
Ad #6421
Year:
Make:
DREIS & KRUMP
Model:
68B
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Ohio
Country:
USA
Price:
$Sold USD
General Description
55 TON X 8' DREIS & KRUMP BRAKE:
CAPACITY ....................... 55 TON AT BOTTOM BENDING CAPACITY ............... 8' X 14 GAUGE LENGTH OF BED .................. 8' DISTANCE BETWEEN HOUSINGS ...... 6'6´´ STROKE OF RAM .................. 3´´ POWER RAM ADJUSTMENT ........... 3´´ DIE SPACE SDAU ................. 12´´ DEPTH OF THROAT ................ 8´´ STROKES PER MINUTE ............. 40 FORWARD & REVERSE............... YES MECHANICAL CLUTCH .............. YES FULL LENGTH FOOT TREADEL ....... YES MOTOR .......................... 3 HORSPOWER
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 6416 , Year = , Make = VERSON , Model = 2062
Category:Press Brakes (Mechanical)
Capacity: 30 TON X 6'6´´ VERSON PRESS BRAKE
Ad #6416
Year:
Make:
VERSON
Model:
2062
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Ohio
Country:
USA
Price:
$SOLD USD
General Description
30 TON X 6'6´´ VERSON PRESS BRAKE:
CAPACITY ............................... 30 TON BENDING CAPACITY ....................... 10 GAUGE X 66´´ OVERALL LENGTH OF BED & RAM ............ 78´´ DISTANCE BETWEEN HOUSING ............... 62´´ STROKE ................................. 2-1/2´´ SHUT HEIGHT (SDAU) ..................... 7-1/2´´ RAM ADJUSTMENT (POWER) ................. 3´´ DEPTH OF THROAT ........................ 7´´ STROKES PER MINUTE ..................... 40 FRONT ARM SUPPORT ...................... YES MANUAL BACK GAUGE ...................... YES AIR FOOT TRIP .......................... YES ADJUSTMENT MOTOR ....................... 1/2 HORSEPOWER MAIN MOTOR ............................. 3 HORSEPOWER
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7573 , Year = 1976 , Make = PACIFIC , Model = 70-6
Category:Press Brakes (Hydraulic)
Capacity: 70 TON X 6' PACIFIC HYDRAULIC PRESS BRAKE With CNC Back Gauge
Ad #7573
Year:
1976
Make:
PACIFIC
Model:
70-6
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Mid West
Country:
USA
Price:
$Sold USD
General Description
70 TON X 6' PACIFIC HYDRAULIC PRESS BRAKE
CAPACITY ................................. 70 TON OVERALL LENGTH OF BED & RAM .............. 72´´ DISTANCE BETWEEN HOUSINGS ................ 51-1/2´´ STROKE OF RAM ............................ 8´´ OPEN HEIGHT .............................. 15´´ CLOSED HEIGHT ............................ 7´´ DEPTH OF THROAT .......................... 6´´ AUTO GAUGE CNC BACK GAGE MODEL ........... 1000 ELECTRIC FOOT TRIP ....................... YES MILLED & DRILLED FOR ANGLES .............. YES MOTOR .................................... 12-1/2 HORSEPOWER
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year -Make - DREIS & KRUMP Model - SP203
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7570 , Year = , Make = DREIS & KRUMP , Model = SP203
Category:Finger Brakes-Box & Pan Brakes
Capacity: 10' X 12 GA DREIS & KRUMP POWER BOX & PAN BRAKE
Ad #7570
Year:
Make:
DREIS & KRUMP
Model:
SP203
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Mid West
Country:
USA
Price:
$Sold USD
General Description
10' X 12 GA DREIS & KRUMP POWER BOX & PAN BRAKE
CAPACITY ............................. 12 GAUGE @ 10' OVERALL BENDING LENGTH ............... 10'1´´ FLOOR TO BED ......................... 36-1/2´´ CONTROLS ............................. NORMAL/JOG/UP/DOWN FINGERS .............................. FULL SET OF FINGERS MOTOR ................................ 3 HORSEPOWER
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1967 Make - CINCINNATI Model - #5 (AUTO CYCLE)
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7568 , Year = 1967 , Make = CINCINNATI , Model = #5 (AUTO CYCLE)
Category:Press Brakes (Mechanical)
Capacity: 135 TON X 10' CINCINNATI MODEL #5 PRESS BRAKE With CNC Back Gauge
Ad #7568
Year:
1967
Make:
CINCINNATI
Model:
#5 (AUTO CYCLE)
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Mid West
Country:
USA
Price:
$SOLD USD
General Description
135 TON X 10' CINCINNATI MODEL #5 PRESS BRAKE
OVERALL LENGTH OF BED ...... 10' DISTANCE BETWEEN HOUSINGS .. 8'6´´ STROKE ..................... 3´´ MILLED AND DRILLED FOR ANGLES FLOOR STANDING CNC BACK GUAGE ............. AUTOBEND 4
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Adira 165 ton x 13' Length Bed & Ram 13'3.4" 10'-2" between housings Stroke 4" 24" Motorized Back Gage
Full Machine Specifications
Capacity 165 Tons Length of Bed and Ram 13'3.4" Distance Between Housings 10'2" Stroke 4" Open Height 3.4" Open Height with Punch Holder 9.25" Throat Clearance 17.72" Back Guage Speed X Axis 45 Inch per Min Main Motor Hoursepower 12HP Oil Tank Capacity 26.5 US Gallons
Equipped With
Adira 24" Motorized Back Guage Variable Tonage Swing Down 4-Way Die Lifter Sectional Ram Clamps no tooling included
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
300 Ton Mechanical Press Break 12’ Length of Bed 4” Stroke 200 ton at mid stroke 10’6” Between Housings 40H.P.
Full Machine Specifications
ISB PC 200 Press Brake Control Capacity (Near Bottom of Stroke) 300 Tons Capacity (Mid Stroke) 200 Tons Overall Length of Bed & Ram 12' Distance Between Housings 10'6" Stroke 4" Shut Height (SDAU) " Ram Adjustment (Power) 6" Strokes Per Minute 30 Throat 8" Main Motor Horsepower 40
Equipped With
ISB PC 200 Press Brake Control Featuring Forward reverse operation 90 Degree stop test Stroke Stop Control Inch Single Stroke Operation Ground Fault Indicator AC on/off key selector switch Programmable top stop Overturn Brake Monitor & Motion Detector Air Solenoid, valves, cylinder & actuator Electric Soot Switch Air Actuated Clutch Tilting Ram Adjustment with Dual Indicators Bed & Ram Machined for Angles Bolt on Angle Brackets Automatic Lubrication System Forward/Reverse Main Motor Controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Delem DA-65 Multi Axis Control Capacity 144 Tons Overall Length of Bed & Ram 120' Distance between Housings 106" Stroke 8.5" Open Height 19" Closed Height 10.5" Throat Clearance 16" Maximum Inclination of Ram 0.4"
Speeds Form: 2-24" Per Min Return: 320" Per Min Distance Floor to Top of Bed 34" Width at Top of Bed 4.75" Operating Height 41" Oil Capacity 66 US Gallons Main Motor HP 25 HP
Control Features Dalem DA-65 Multi Axis Control Off Line Capable Programmable Forming Speeds Programmable Ram Opening Programmable Reversal Programmable Tonage Displayed Through CRT
Specs Continued Travel 23.6" Max Speed 200" Per Min R-Axis Travel 9.8" Max Speed 1900" Per Min 2 Back Guage Fingwer Supports Fully Programmable Back Guage Speeds
Equipped With Programmable Lower Tool Holder Crowning Adjustment Full Tonage Throughout Stroke
Precision Ram Leveling with Dual Linear Glass Scale Electric Foot Switch Pedestal Palm Button Station Full Safety Enclosure ISB Pro Light Curtains Manuals
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1968 Make - NIAGARA Model - 1B-36-6-8
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7309 , Year = 1968 , Make = NIAGARA , Model = 1B-36-6-8
Category:Press Brakes (Mechanical)
Capacity: 55 ton NIAGARA 1B-36-6-8 Mech. Press Brake W/Hurco 5 CNC Back Gauge
Ad #7309
Year:
1968
Make:
NIAGARA
Model:
1B-36-6-8
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
55 ton NIAGARA 1B-36-6-8 Mechanical Press Brake with Hurco 5 CNC Back gauge
Capacity near bottom of stroke 55 tons Capacity at mid-stroke 36 tons Bending capacity: 8’ x 12ga. 6’ x 10ga. 3’ x 3/16” Overall length of bed and ram 96” Distance between housings 6’6” Speed 40 SPM Stroke 2 ½ Ram adjustment 4” Die space 12” Depth of throat 8 ¼”
EQUIPPED WITH: Hurco 5 Single axis CNC back gauge Lower die holder Motorized adjustment 4 pieces of short male and female dies Non-metallic ways 3 H.P. 3/208-230-460 volt Motor w/ controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7309 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1987 Make - DI-ACRO Model - 14-48-2
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7308 , Year = 1987 , Make = DI-ACRO , Model = 14-48-2
Category:Press Brakes (Mechanical)
Capacity: 4' x 17 Ton DI-ACRO Hydra-Mechanical Press Brake, Model 14-48-2
Ad #7308
Year:
1987
Make:
DI-ACRO
Model:
14-48-2
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
2,420 Lbs.
Dimension: L x W x H
52" x 30" x 75"
Machine Location:
City:
On Request
State:
New York
Country:
USA
Price:
$sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
4' x 17 Ton DI-ACRO Hydra-Mechanical Press Brake, Model 14-48-2
Rated tonnage 17 ton Overall length of bed and ram 48" Clear distance between housings 36-1/4" Bending capacity (mild steel on full bed) 14 gauge Variable work stroke setting 0 to 1" in 1/4" increments Variable total stroke setting 1/2" to 2" (1/2", 1" & 2") Speed ranges (depending upon total stroke setting, 17,23,24,25,26,27,28 & 50 S.P.M. work stroke setting, and stroke speed control setting) Shut height - bed down, stroke down 9" Bed adjustment, ram adjustment 2" Die holder height 3" Throat clearance from center of dies 6"
EQUIPPED WITH:
Hydra-mechanical operation: the up and down movement of the ram is obtained from an eccentric shaft. This shaft is powered by a specially-designed hydraulic motor. Dual speed operating cycle: allows for pre-set of fast ram approach and slow forming. Instant ram reverse. Ram inching for scribed line work. Front operated micrometer back gauge calibrated to .001" Slo/Hi-Slo/Hi-Stop Slo cycle control selector switch Off/Setup/Run mode selector switch Ram mounted palm buttons for cycling ram Ram mounted "Emergency Stop" and "Ram Open" palm buttons Remote electric foot pedal Dual ram adjustment indicators for measurement of ram adjustment and tilt Full complement of sectional ram clamps Bottom die holder Manually operated TRABON lubrication pump 3 H.P. 3/60/230-460 volt hydraulic pump motor and electrical controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7308 when Inquiring
Asking Price: $sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1986 Make - LVD Model - PPN400/4500
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7300 , Year = 1986 , Make = LVD , Model = PPN400/4500
Category:Press Brakes (Hydraulic)
Capacity: 440 ton LVD Model PPN400/4500 Hydraulic Press Brake
Ad #7300
Year:
1986
Make:
LVD
Model:
PPN400/4500
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
65,000 lbs
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
General Description
440 ton LVD Model PPN400/4500 Hydraulic Press Brake
Max. capacity 440 tons Overall length of bed and ram 177” Distance between housings 148” Throat depth 11.8” Shut height 21.65” Ram adjustment 8.66” Max. stroke 11.8” Bed width 9.8” Capacity of back gage system 40” Approach speed 188 IPM Pressing speed 21.5 IPM Return speed 187 IPM
EQUIPPED WITH: 40” cap.front operated motorized back gage system Hydraulic tool clamping Lower die holder Remote palm and foot control pedestal 48 H.P. Main Drive Motor
Requires: 47.2” pit depth for bed Dimensions from floor level: 269”LRx 136.2”Wx 162” Height from proposed floor level
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
We found 6 matching ads. Now displaying the remaining 6 ads.
FOR SALE: Year - 1951 Make - BERTSCH Model - 30/25
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6976 , Year = 1951 , Make = BERTSCH , Model = 30/25
Category:Initial Pinch & Pyramid Type Plate Bending Rolls
Capacity: USED 10' X 2-1/4" BERTSCH MODEL 30/25 INITIAL PINCH PLATE BENDING ROLL
Ad #6976
Year:
1951
Make:
BERTSCH
Model:
30/25
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
167,000 LBS.
Dimension: L x W x H
27'6" x 14'3" x 11'5"
Machine Location:
City:
On Request
State:
Pennsylvania
Country:
USA
Price:
$sold USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
USED 10' X 2-1/4" BERTSCH MODEL 30/25 INITIAL PINCH PLATE BENDING ROLL
CAPACITY: 10' X 2-1/4" BOILER DUTY 10' X 1-3/4" PIPE DUTY ROLL DIAMETER: 25" LENGTH OF ROLLS: 10'2" AIR DROP END POWER ROLL ADJUSTMENT MAIN DRIVE MOTOR: 125 HP
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6976 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 6977 , Year = 1956 , Make = BERTSCH , Model = 14
Category:Initial Pinch & Pyramid Type Plate Bending Rolls
Capacity: USED 12' X 3/4" BERTSCH MODEL 14 INITIAL PINCH PLATE BENDING ROLL
Ad #6977
Year:
1956
Make:
BERTSCH
Model:
14
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
57,000 LBS.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Texas
Country:
USA
Price:
$Sold USD
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item
General Description
USED 12' X 3/4" BERTSCH MODEL 14 INITIAL PINCH PLATE BENDING ROLL
CAPACITY: 12' X 3/4" BOILER DUTY 12' X 5/8" PIPE DUTY ROLL DIAMETER: 15" LENGTH OF ROLLS: 12'2" AIR DROP END MOTORS: 30 HP MAIN DRIVE 15 HP REAR ROLL ADJUSTMENT (2) 2 HP WEDGE ADJUSTMENT NOTE - THIS PLATE ROLL WAS NOT USED IN PRODUCTION WORK, ONLY MAINTENANCE WORK. NEW ELECTRICS INCLUDING JOYSTICK CONTROL, MOTOR BRAKE, AND MAGNETICS WERE UPDATED BY BERTSCH IN 1994. >From Maintenance Shop, very little use.
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6977 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6640 when Inquiring
Asking Price: $SOLD
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6639 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7430 , Year = , Make = KAUFMAN , Model =
Category:Initial Pinch & Pyramid Type Plate Bending Rolls
Capacity: 6 FT. X 3/16" KAUFMAN ONE PASS 2-ROLL HYDRAULIC K-PRENE SHEET ROLLING
Ad #7430
Year:
Make:
KAUFMAN
Model:
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
13,400 lbs.
Dimension: L x W x H
136" x 67" x 75"
Machine Location:
City:
On Request
State:
Illinois
Country:
USA
Price:
$sold USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
6 FT. X 3/16" KAUFMAN ONE PASS 2-ROLL HYDRAULIC K-PRENE SHEET ROLLING & CURVING MACHINE Capacity: 3/16" Mild Steel Working Length of Rolls: 6' K-Prene Roll: 20" Diameter Upper Steel Roll: 9-1/2" Diameter Rolling Speed Approx.: 12 FPM EQUIPPED WITH: Hydraulic Drop End Hydraulic Powered Roll Pressure Hydraulic Bottom Roll Adjustment Electric Foot Switch Selector Switch For Lower - Off - Raise Pushbuttons For Close - Open - Up - Down 5 HP 860 RPM 220/440/3/60 Hydraulic Pump Motor 10 HP 1750 RPM 208/230/460/3/60 Main Motor
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7430 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6933 when Inquiring
Asking Price: $SOLD
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Ram stroke 1.136" Clearance between dies and stripper .787" Crank shaft speed 350/700 RPM Number of turret stations 36 Tooling style 112 "A" to "G" 114 "H" to "L" Air supply 80 P.S.I
EQUIPPED WITH: 36 Station turret Automatic repositioning Ball screws Automatic slug conveyer Large assortment of tooling 15 H.P. 3/60/460 Volt Main Motor with controls OPB General Numeric CNC control with CRT, retrofitted 1990
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7311 when Inquiring
Asking Price: $sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6899 when Inquiring
Asking Price: $Sold
Buyers Premium:A 7 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7510 , Year = 2004 , Make = Eagle , Model = BA-35
Category:Benders-Pipe and Tube
Capacity: 2004 Eagle BA-35 Tube Bender
Ad #7510
Year:
2004
Make:
Eagle
Model:
BA-35
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
Eagle BA-35 Full Featured Hydraulic Computer rolled ring bending machine variable speed rotation 3.5" floppy drive 1" and 1 1/2" Square set of dies and 1 1 3/8" round die that are made of nylon for soft materials
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
PC Based Control Industrial PC with 3.5" Floppy Drive Unlimitied Storage Capacity Three Driven Shafts for Driving of the Profile Oil Bath Speed Reducer Variable Rotation Speed Hydraulic Powered Forming Roll Hydraulic Power Unit Dual Lateral Material Guide, four way adjustable Vertical and Horizontal Operating Positions with Rests on Remote Pulpit with Push Buttons Heavy Duty Foot Pedals & Emergency Stop Digital display Operating & Maintenance Manuals Key Switch Security Lockout RS 232 Serial Port "Automatic Interpolation" Software "Auto Motor Image" Capability "Graphic Imaging"
1" and 1 1/2" Square set of dies and 1 1 3/8" round die that are made of nylon for soft materials
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
We found 12 matching ads. Now displaying the remaining 12 ads.
FOR SALE: Year - 1959 Make - BUFFALO Model - NO. 2-1/2
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6981 , Year = 1959 , Make = BUFFALO , Model = NO. 2-1/2
Category:Ironworkers
Capacity: USED BUFFALO NO. 2-1/2 UNIVERSAL IRONWORKER
Ad #6981
Year:
1959
Make:
BUFFALO
Model:
NO. 2-1/2
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
10,500 LBS.
Dimension: L x W x H
95" x 49" x 99"
Machine Location:
City:
On Request
State:
Texas
Country:
USA
Price:
$sold USD
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item
General Description
USED BUFFALO NO. 2-1/2 UNIVERSAL IRONWORKER
RAM PUNCH PRESSURE: 105 TONS STROKES PER MINUTE: 44 DEPTH OF THROAT: 24" SHEAR: 8" X 7/8" FLATS 3/4" PLATE 14" LENGTH OF KNIVES 24-1/4" WORK HEIGHT PUNCH: 1-3/16" X 7/8" 1" X 1" 38-3/4" WORK HEIGHT BAR CUTTER: 6" X 6" X 1/2" ANGLES 90 DEGREES 4" X 4" X 1/2" ANGLES 45 DEGREES 2-1/4" ROUNDS 2" SQUARES 45-3/8" WORK HEIGHT BUILT IN 90 DEGREE NOTCHER ON PUNCH HEAD: 3" X 7/16" ANGLES 7/16" PLATE 3-1/4" DEPTH OF CUT 54-1/2" WORK HEIGHT BUILT IN SQUARE COPER ON SHEAR END: 4" X 1/2" ANGLES 1/2" PLATE 2-1/4" WIDTH OF CUT 3-1/2" DEPTH OF CUT 48-1/4" WORK HEIGHT ONE-SHOT LUBRICATION MOTOR: 7-1/2 HP 1760 RPM
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6981 when Inquiring
Asking Price: $sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7811 , Year = 1986 , Make = Piranha , Model = P3
Category:Ironworkers
Capacity: 50 Ton Hydraulic Ironworker Piranha Model P3
Ad #7811
Year:
1986
Make:
Piranha
Model:
P3
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Illinois
Country:
USA
Price:
$Sold USD
General Description
Piranha Model P-3 50 Ton Hydraulic Ironworker
Angle Shear Cap (L1): 5 " Angle Shear Cap (L2): 5 " Angle Shear Cap (T): .375 " Tonnage: 50 Ton Coper/Notcher: 2-3/4" x 4" x 1/4" Power: 10 HP Throat: 8 "
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7809 , Year = 2005 , Make = Piranha , Model = P-50
Category:Ironworkers
Capacity: 50 Ton Hydraulic Ironworker Piranha Model P-50
Ad #7809
Year:
2005
Make:
Piranha
Model:
P-50
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
2,600 lbs.
Dimension: L x W x H
24" x 66" x 60"
Machine Location:
City:
On Request
State:
New Jersey
Country:
USA
Price:
$Sold USD
General Description
Used P-50 PIRANHA 5"x 5"x 3/8" - 50 Ton Hydraulic Ironworker
General Specifications:
Tonnage Capacity At Punch End: 50 Throat Depth: 8" Closed Height w/o Die Block: 9-1/4" Bar Shear; Round Min. to Max. 1/4" to 1-1/2" Square Min. to Max. 1/2" to 1" Punch End; Max. Material 13/16" thru 3/4" Max. Hole (special tool) 5" thru 1/8" Platen Table Size: 10" D x 17" W Bending Attachment: 8" Strokes Per Minute: 60 at 1/2" Open Height: 4-1/4" Standard Motor: 10 HP AC Coper-Notcher; (Mat) 2-3/4" x 4"x 1/4" Plate Shear; 15" Long 3/4"x 10" 5/8"x 15" Angle Shear; 5"x 5"x 3/8" w/Special Tool: 4"x 4"x 1/2"
Equipped With:
Automatic Urethane Hold Down on Punch Stripper & On Angle Plate & Bar Shear Front 5 Position Joy Stick Electric Limit Switches To Set Stroke Control When Using Foot Pedal Foot Pedal Controls Standard Knives Coper-Notcher Station Assorted Punch & Dies Optional Quick Set Punch Gauging Table Optional Mechanical Back Gauge Optional 8" (Press Brake Type) Bending Attachment Pipe Notching Attachment Integral Lifting Lug
Replacement Cost NEW Today Including Cost Of Options Approximately $15,400. At Quoted Price, We Will Off Limited 6 Month Guarantee From Factory Rep.
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year -Make - Peddinghaus Model - 210A/16
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7797 , Year = , Make = Peddinghaus , Model = 210A/16
Category:Ironworkers
Capacity: 70 Ton Mechanical Ironworker Peddinghaus Model 210A/16
Ad #7797
Year:
Make:
Peddinghaus
Model:
210A/16
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
4,800 lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Kentucky
Country:
USA
Price:
$Sold USD
General Description
Specifications: Capacity 70 Tons Punch Capacity1-1/16” in ¾” or 7/8” in 7/8” Angle Capacity5” x 5” x ½” @ 90 deg Flat4-3/8” x 1” or 11” x 3/8” Notcher 9/16” Speed45 SPM
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1980 Make - Scotchman Model - 6509
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7796 , Year = 1980 , Make = Scotchman , Model = 6509
Category:Ironworkers
Capacity: 65 Ton Hydraulic Ironworker Scotchman Model 6509
Ad #7796
Year:
1980
Make:
Scotchman
Model:
6509
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
2,750 lbs.
Dimension: L x W x H
24" x 60" x 66"
Machine Location:
City:
On Request
State:
North Carolina
Country:
USA
Price:
$Sold USD
General Description
Specifications: 65 Ton Punch Station (1-16" Dia x 3/4" Thick) reference 9" Throat Shear Capacity:1" X 6",3/4" X 10",3/8" X 16",1/4" X 24" Electrics: 5HP Hyd Motor
Equipped With:
24" Flat Bar Shear With 4-Way Reversible Blade
Optional Accessories:
Angle Shear Capacity At 90 Degree: 6" x 6" x 3/8" Rod Shear: Round 1/4" to 1-1/4", 9 Cavities Square 1/4" to 1", 1 Cavity 24" Brake Attachment, 2" Opening Dies & Punches
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1995 Make - Edwards Model - 50 Ton Jaws IV
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7798 , Year = 1995 , Make = Edwards , Model = 50 Ton Jaws IV
Category:Ironworkers
Capacity: 50 Ton Hydraulic Ironworker Edwards Model Jaws IV
Ad #7798
Year:
1995
Make:
Edwards
Model:
50 Ton Jaws IV
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
1,500 lbs.
Dimension: L x W x H
3' x 3' x 5'
Machine Location:
City:
On Request
State:
Iowa
Country:
USA
Price:
$SOLD USD
General Description
Specifications:
Punch Capacity - 1" hole in 5/8" Plate Shear Capacity - 10" x 1/2" Round Capacity - 1" Square Capacity - 1" Angle - 3" x 3" x 3/8" Coper - 2" x 3" x 5/16" 3 HP Main Motor
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1964 Make - STRIPPIT Model - Super 30
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7312 , Year = 1964 , Make = STRIPPIT , Model = Super 30
Category:Powered: Hole/ Turret Punches
Capacity: 30 Ton STRIPPIT SUPER 30 Fabricator
Ad #7312
Year:
1964
Make:
STRIPPIT
Model:
Super 30
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
7000 lbs.
Dimension: L x W x H
99.5" x 78" x 70"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
30 Ton STRIPPIT SUPER 30 Fabricator
Capacity 30 Ton Throat depth 30” Max. hole diameter 3 ½” Dia. x 12 ga. Max. Material thickness 1”-1/4” Sheet size 30” x 30” Gauging with stops 30” x 30” Stroke length 5/8” Speed 165 HPM Table adjustment 2 ¼”
EQUIPPED WITH:
Hand operated duplicator attachment Nibbling attachment 1 ¼” and 3 ½” punch holders 2-Axes DRC digital readouts Adjustable table height (2) Cabinets with large quantity of tooling 1 H.P. 3/60/220-440 Volt Motor and controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7312 when Inquiring
Asking Price: $sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 1992 Make - WYSONG Model -
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7313 , Year = 1992 , Make = WYSONG , Model =
Category:Welding Positioners
Capacity: WYSONG Motorized headstock and tailstock welding positioner set
Ad #7313
Year:
1992
Make:
WYSONG
Model:
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
WYSONG Motorized headstock and tailstock welding positioner set
Approx. weight capacity 10,000 lbs. Table diameter 60” Max. height table center to floor 43” EQUIPPED WITH:
Tailstock has roller wheels for track movement for length adjustment between faceplates Headstock and tailstock mounted with 60” diameter T-slotted faceplates 3 H.P. Baldor 3/60/230-460 volt main drive with gear box, FVR G7S AC inverter drive and variable speed control with disconnect box Remote foot pedal control 18’L tracks for tailstock
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7313 when Inquiring
Asking Price: $sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
We found 21 matching ads. Now displaying the remaining 21 ads.
FOR SALE: Year - 1975 Make - WILLIAMS & WHITE Model - Vertical
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6874 , Year = 1975 , Make = WILLIAMS & WHITE , Model = Vertical
Category:Straight Side Press
Capacity: 500 Ton WILLIAMS & WHITE VERTICAL DOWN-ACTING HYDRAULIC PRESS
Ad #6874
Year:
1975
Make:
WILLIAMS & WHITE
Model:
Vertical
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Iowa
Country:
USA
Price:
$sold USD
General Description
1 PRE-OWNED WILLIAMS & WHITE VERTICAL, HOUSING-TYPE, DOWN-ACTING HYDRAULIC PRESS W/HYDRO-PNEUMATIC CUSHION
SPECIFICATIONS
CAPACITY (PRESSING) ------------------- 500 TONS CAPACITY (INTERMEDIATE PRESSING) ------ 145 TONS CAPACITY (STRIPPING) ------------------ 125 TONS (NET) LIFT CAPACITY @ FAST RETURN ----------- 20 TONS BED SIZE ------------------------------ 60" X 72" RAM SIZE ------------------------------ 60" X 72" RAM SPEED ----------------------------- 9-990 IPM PLATEN AREA --------------------------- 72" R-L X 60" F-B DISTANCE BETWEEN HOUSINGS (R-L) ------- 73" SIZE TIE RODS ------------------------- 6-3/4" BOLSTER ------------------------------- 72" X 60" X 8" DAYLIGHT (MOVING PLATEN TO BOLSTER) --- 60" STROKE -------------------------------- 45" SHUT HEIGHT --------------------------- 15" WINDOWS ------------------------------- 30"
PLATEN SPEEDS:
FAST ADVANCE -------------------------- 990" PER MINUTE INTERMEDIATE PRESSING ----------------- 30 TO 290" PER MINUTE* PRESSING ------------------------------ 9 TO 87" PER MINUTE* SLOW RETURN (STRIPPING) --------------- 28 TO 283" PER MINUTE @ 125 TONS STRIPPING FAST RETURN --------------------------- 905" PER MINUTE @ 20 TONS LIFT. (* ADJUSTMENT OF INTERMEDIATE AND PRESSING SPEEDS WILL BE PROPORTIONATE.) HYDRAULIC CYLINDERS(ONE DOUBLE ACTING)- 18-1/2" X 15-1/2" (TWO DOUBLE ACTING)- 8-1/2" X 7" HYDRAULIC WORKING PRESSURE ------------ 2,616 PSI @ 500 TONS HYDRAULIC PUMPS - OILGEAR ------------- #2 REQUIRED - DM-10025-M TYPE MOTORS --------------------------- T.E.F.C. HORSEPOWER & SPEED OF MOTORS ---------- TWO 100 H.P. - 900 RPM NUMBER OF KNOCKOUT BARS IN SLIDE ------ (3) STROKE OF KNOCKOUT BARS --------------- 3"
HYDRO-PNEUMATIC CUSHION:
NUMBER OF CUSHION PADS ---------------- (2) CAPACITY EACH PAD --------------------- 80 TONS TOTAL CAPACITY ------------------------ 160 TONS SIZE EACH CUSHION PAD ----------------- 26" R-L X 46" F-B STROKE -------------------------------- 15" LIFTING CAPACITY ---------------------- 40 TONS,(20 TON EA. PAD) CUSHION RETURN SPEED ------------------ 375" PER MINUTE-MINIMUM
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1963 Make - NIAGARA Model - AF-4 1/2
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6708 , Year = 1963 , Make = NIAGARA , Model = AF-4 1/2
Category:OBI Presses
Capacity: 75 Ton NIAGARA Model AF- 4 ½ O.B.I. Flywheel press with air clutch
Ad #6708
Year:
1963
Make:
NIAGARA
Model:
AF-4 1/2
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
13,000 lbs.
Dimension: L x W x H
90" x 66" x 129"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
75 Ton NIAGARA Model AF- 4 ½ O.B.I. Flywheel press with air clutch
Rating of press 75 Tons Safe capacity near bottom of stroke 90 tons Diameter of shaft at main and connection bearings 4 ½”-6 ¾” Stroke 4” Variable speeds 60 to 120 SPM Ram adjustment 3 3/8” Throat depth 12 ½” Slide area 15” x17 1/8” Distance between gibs 13 ¼” Bed area 36” x 24” Rectangular opening in bed 18” x 14” Width of opening in back 20” Shut height 15 ¾”
EQUIPPED WITH:
Electro-pneumatic friction clutch and brake Flywheel design Bolster plate Air Counter balance of ram Dual palm controls 7 ½ H.P. 3/60/220-440 variable speed drive w/ controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6708 when Inquiring
Asking Price: $sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1981 Make - ROUSSELLE Model - G2-150-60-30
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6704 , Year = 1981 , Make = ROUSSELLE , Model = G2-150-60-30
Category:Gap Frame Presses
Capacity: 150 Ton ROUSSELLE G2-150-60-30 Open Back Gap Frame Press Line
Ad #6704
Year:
1981
Make:
ROUSSELLE
Model:
G2-150-60-30
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
General Description
150 Ton ROUSSELLE G2-150-60-30 Open Back Gap Frame Double Geared Mechanical Press Line with Straightener/Air Feed and Uncoiler - consisting of following:
Press Specs: 150 Ton Rousselle G2-150-60-30 Open Back Gap Frame Double Geared Mechanical Press
Capacity: 150 Tons Bed and slide areas: 30" x 60" Opening in bed: 16 1/2" x 54" Distance between uprights: 68" Distance between gibs: 61-1/2" Stroke of slide: 6" Shut height on bed: 17" Number of knockout bars: 2 Speed: 35 SPM Adjustment of slide: 6" Depth of gap: 16" Height of gap: 12" Bed to floor: 34" Thickness of bed bolster: 4"
EQUIPPED WITH:
T-slotted bed and ram bolsters w/drilled & tapped holes Double geared twin drive Geared air clutch w/surge tank and disc brake w/monitor (3) Model 3MC10-3 air cushions w/surge tanks Lincoln automatic lubrication Brake monitor Dual air counter-balance with surge tanks Power slide adjustment Remote electric foot pedal Wintriss Shadow IV Light Safety Curtains Ram mounted dual electric palm buttons 8"W motorized scrap conveyor Magnetic reversing starter Fused disconnect switch Electric stroke counter 20 H.P. 3/60/230-460 volt motor and controls Wired for 3/60/460 volt operation Approximate weight: 34,500 lbs. Dimensions: 105"LR x 85"FB x 152"High
Straightener/Air Feed Specs: Model D200-18X30-RH, DALLAS Straightener/Air Feed, S/N 14381 (New 1981)
Capacity: .060"Thick x 18"Wide .090"Thick x 12"Wide .125" Thick x 6"Wide Feed length: 0" to 30-1/2" Feeds: 35 SPM @ 30"Length 5-Roll pull thru straightener Adjustable cabinet base Two roll stock lubricator with 1/4 H.P. pump Passline height adjustable: from 40" to 52" Power: 1/60/120 volts
Uncoiler Specs: Model DRR2500X 18"Wide DALLAS Motorized Uncoiler, S/N 14380 (New 1981)
Coil O.D. max.: 48" Coil I.D. range: 16" to 20" Max. coil weight: 2500 lbs. 1 H.P. A.C. fixed speed drive turning mandrel @ approx. 12 RPM Rheostat adjustable electric brake 6-Adjustable coil keepers Arm type loop control Power: 3/60/480 volt
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1981 Make - ROUSSELLE Model - G2-150-60-30
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6707 , Year = 1981 , Make = ROUSSELLE , Model = G2-150-60-30
Category:Gap Frame Presses
Capacity: 150 Ton ROUSSELLE G2-150-60-30 Open Back Gap Frame Press
Ad #6707
Year:
1981
Make:
ROUSSELLE
Model:
G2-150-60-30
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
34,500 lbs.
Dimension: L x W x H
105" x 85" x 152"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
150 Ton ROUSSELLE G2-150-60-30 Open Back Gap Frame Double Geared Mechanical Press
Capacity: 150 Tons Bed and slide areas: 30" x 60" Opening in bed: 16 1/2" x 54" Distance between uprights: 68" Distance between gibs: 61-1/2" Stroke of slide: 6" Shut height on bed: 17" Number of knockout bars: 2 Speed: 35 SPM Adjustment of slide: 6" Depth of gap: 16" Height of gap: 12" Bed to floor: 34" Thickness of bed bolster: 4"
EQUIPPED WITH:
T-slotted bed and ram bolsters w/drilled & tapped holes Double geared twin drive Geared air clutch w/surge tank and disc brake w/monitor (3) Model 3MC10-3 air cushions with surge tanks Lincoln automatic lubrication Brake monitor Dual air counter-balance with surge tank Power slide adjustment Remote electric foot pedal Wintriss Shadow IV Light Safety Curtains Ram mounted dual electric palm buttons 8"W motorized scrap conveyor Magnetic reversing starter Fused disconnect switch Electric stroke counter 20 H.P. 3/60/230-460 volt motor and controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6707 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6706 when Inquiring
Asking Price: $sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1969 Make - FEDERAL Model - No.10
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6710 , Year = 1969 , Make = FEDERAL , Model = No.10
Category:OBI Presses
Capacity: 125 Ton No.10 FEDERAL O.B.I. Flywheel Press
Ad #6710
Year:
1969
Make:
FEDERAL
Model:
No.10
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
19,000 lbs.
Dimension: L x W x H
72" x 60" x 119"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
125 Ton No.10 FEDERAL O.B.I. Flywheel Press
Tonnage, capacity near bottom of stroke 125 Tons Stroke 4” Adjustment of slide 2 ½” Round punch shank hole 2 ½” Face area 30”LR x 14”FB Bed area 40”LR x 28”FB Shut height 17 ½” Throat depth 15” Opening in bed 18” x 14” Opening through back 18” Crankshaft dia. at main bearings 5 ¾” Diameter at crank bearing 7” Speed 120 SPM
EQUIPPED WITH:
Flywheel construction Air clutch and brake 3” thick bolster plate Dual palm button controls Lincoln CentroMatic Lubrication Knock-out bar Single or continuous stroke 15 H.P. 3/60/230-440 Volt Motor with controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6710 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1973 Make - JOHNSON Model - 80FW-AC
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6709 , Year = 1973 , Make = JOHNSON , Model = 80FW-AC
Category:OBI Presses
Capacity: 80 Ton JOHNSON O.B.I. Flywheel Press W/Air Clutch, Model 80FW-AC
Ad #6709
Year:
1973
Make:
JOHNSON
Model:
80FW-AC
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
14,200 lbs.
Dimension: L x W x H
80" x 69" x 121.5"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
80 Ton JOHNSON(South Bend)O.B.I. Flywheel Press with Air Clutch, Model 80FW-AC
Pressure near bottom of stroke: 80 tons Diameter of main bearings and pin: 4-3/4" x 5-3/4" Stroke: 4" Shut height: 15-1/2" Ram adjustment: 3-1/2" Ram area: 16-1/4" x 13-1/2" Bed area: 36" x 24" Width of opening through back: 18-1/2" Speed: 85 SPM
EQUIPPED WITH:
Flywheel Air clutch and brake Dual palm buttons 41-1/4" x 26" x 3-3/8" Thick, t-slotted bolster plate Dual air counter balance cylinders w/surge tank Remote electric foot control One shot lubrication 7-1/2 H.P. 3/60/220-440 volt motor w/controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6709 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 6705 , Year = 1980 , Make = L&J , Model = No.27ss
Category:Gap Frame Presses
Capacity: 27 Ton #27ss L & J Single Point High Speed Fixed Base Gap Frame Press
Ad #6705
Year:
1980
Make:
L&J
Model:
No.27ss
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
5,300 lbs.
Dimension: L x W x H
48" x 46.625" x 79"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
27 Ton No.27ss L & J Speed Stamper Single Point High Speed Fixed base Gap Frame Press
Crankshaft-main & crankpin dia. 2 ¾”-3 ¾” Stroke 1” Ram adjustment 2” Shut height 10” Bed area 21 ½” x 13” Flanged ram size 16” x 10” Gap 7” Diameter of hole in bed 8” Opening thru back 12” Shank hole 1 9/16” Dia. Bolster size 13” x 21 ½” x 2 ½” thick Variable press speed range 230-690 SPM
EQUIPPED WITH:
Air clutch and brake Flanged ram with punch shank clamps Ram counter balance Bijur automatic lub.system Floor mounted operator’s console LH + RH 6” Cooper Weymouth Peterson Geared double roll feed, Mdl DRF64HS Dual palms with remote foot switch Series 7501BA automatic press controls including: Bar/off/run Inch/Single/Continuous Foot switch 2-hand control Brake monitor Production counter 7 ½ H.P. Eaton Eddy Dynamatic variable speed drive with Ammeter
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6705 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 6506 , Year = , Make = HPM , Model =
Category:Hydraulic 4 Post Press
Capacity: 500 TON HPM 4-POST HYDRAULIC PRESS
Ad #6506
Year:
Make:
HPM
Model:
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Ohio
Country:
USA
Price:
$sold USD
General Description
500 TON HPM 4-POST HYDRAULIC PRESS:
FAST TRAVERSE MODEL - HOUSING TYPE CAPACITY .......................... 500 TONS TIE ROD DIAMETER .................. 6´´ AREA OF BED ....................... 36´´ X 24´´ AREA OF RAM ....................... 36´´ X 24´´ DIAMETER OF RAM ................... 22´´ DAYLIGHT .......................... 32´´ STROKE ............................ 24´´ SIZE OF WINDOWS ................... 18´´ NO PIT REQUIRED SPEEDS ... 80 IPM ADVANCE ... 56 IPM PRESSING ... 860 IPM RETURN HPM HYDRAULIC PUMP ................ 900 RPM - MODEL 3120-50B-RB50 GPM @ 2500 PSI 100 HORSEPOWER MAIN MOTOR
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 6513 , Year = , Make = P H , Model = 0GF60
Category:Hydraulic C-Frame Press
Capacity: 60 TON P H HYDRAULIC C FRAME PRESS
Ad #6513
Year:
Make:
P H
Model:
0GF60
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Ohio
Country:
USA
Price:
$Sold USD
General Description
60 TON P H HYDRAULIC C FRAME PRESS:
CAPACITY ..................... 60 TON STROKE ....................... 20´´ DAYLIGHT ..................... 33-1/2´´ CLOSED HEIGHT ................ 13-1/2´´ BED AREA (T-SLOTTED) ......... 30´´ X 27´´ RAM AREA ..................... 30´´ X 14´´ GUIDED RAM ................... YES FLOOR TO BED ................. 32´´ HYDRAULIC MOTOR .............. 25 HORSEPOWER
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 6498 , Year = , Make = LEMPCO , Model = EH150
Category:Hydraulic H-Frame Press
Capacity: 150 TON LEMPCO MODEL #EH150 HYDRAULIC H-FRAME PRESS
Ad #6498
Year:
Make:
LEMPCO
Model:
EH150
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Ohio
Country:
USA
Price:
$Sold USD
General Description
150 TON LEMPCO MODEL #EH150 HYDRAULIC H-FRAME PRESS:
CAPACITY .......................... 150 TONS STROKE ............................ 12´´ DIAMETER CYLINDER ROD ............. 3-1/2´´ RAM SPEEDS PRESS .................. 18 IPM RAM SPEEDS RETURN ................. 12 IPM USABLE BED AREA ................... 48´´ X 19´´ DISTANCE BETWEEN FRAME HOUSINGS ... 48´´ X 9-1/2´´ RAM HEAD TRAVEL, LEFT TO RIGHT .... 30´´ HAND CRANK ADJUSTABLE BED HEIGHT TOP MOUNTED HYDRAULICS 10 HORSEPOWER HYDRAULIC MOTOR
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6495 when Inquiring
Asking Price: $SOLD
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1996 Make - PACIFIC Model - 500OBL12
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7645 , Year = 1996 , Make = PACIFIC , Model = 500OBL12
Category:Straight Side Press
Capacity: PACIFIC 750 TON 500OBL12 PRESS
Ad #7645
Year:
1996
Make:
PACIFIC
Model:
500OBL12
Condition:
Good
Serial #:
On Request
Machine Status:
Still in production
Shipping Info:
Requires rigger
Weight:
Approx. 250,000 lbs
Dimension: L x W x H
168” L x 119” W x 212” H
Machine Location:
City:
On Request
State:
Pennsylvania
Country:
USA
Price:
$sold USD
General Description
PACIFIC 750 TON 500OBL12 PRESS
CYBELEC PC 90/9000 CONTROL
750 TON MAX
This press has computer-controlled dual hydraulic 150 ton cushions in bed. We also have a full set of large filler blocks for the ram with T- slots machined in the ram, the bed, and the bottom of the filler bocks. The computer has the capability of holding draw-formed part setting for the cushions and the ram in memory so they can be repeated.
Current Speeds: RA: 360 ipm
FP: 132 ipm
NP: 5-36 ipm ( Variable )
FR: 198 ipm
SR: 66 ipm
Open Height: 60"
Stroke: 24"
Window dimension: 50" x 19"
Bed size: 179" x 72"
Comments:
We have had quotes of $40 -45,000 for rigging this machine out of present location and loading onto your truck
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1978 Make - DAKE Model - Type 8-075
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7315 , Year = 1978 , Make = DAKE , Model = Type 8-075
Category:Hydraulic H-Frame Press
Capacity: 75 Ton DAKE Elec-Draulic II DAKE Acting H-frame press, type 8-075
Ad #7315
Year:
1978
Make:
DAKE
Model:
Type 8-075
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
1,950 lbs.
Dimension: L x W x H
55.5" x 36" x 86"
Machine Location:
City:
On Request
State:
New York
Country:
USA
Price:
$SOLD USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
75 Ton DAKE Elec-Draulic II DAKE Acting H-frame press, type 8-075
Capacity press 75 Tons Capacity pull 28 Tons Ram speed: Pressing 5 I.P.M. Return 15 I.P.M. Vertical travel of table 30” Vertical travel of ram 10” Width between uprights 44” Width between table channels 8 ¼” Max. distance, ram to table 37-5/8”
EQUIPPED WITH:
Variable ram speed with pressure sensitive throttling type 4-way valve Double acting cylinder providing for lifting force as well as pressing force Adjustable table Pressure gauge Flat ram nose for pressing (2) "V" blocks 2 H.P. 3/50/230-460 volt hydraulic pump motor and electrical controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7315 when Inquiring
Asking Price: $SOLD
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Ad # 7316 , Year = 1988 , Make = HTC , Model = 400MS
Category:Straight Side Press
Capacity: 400 ton 400MS HTC Hydraulic Straight Side Press
Ad #7316
Year:
1988
Make:
HTC
Model:
400MS
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
94,000 lbs
Dimension: L x W x H
159" x 110" x 165.5"
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
General Description
400 ton 400MS HTC Hydraulic Straight Side Press, (reconditioned 2005 at cost of $35,000)
All Steel Construction Flush floor design, no pit required Capacity 400 tons Bed size 48 ½” x 125” Ram size 48 ½” x 122 ¼” Max. stroke 7” Shut height 16” Open height 23” Distance between side frames 125 ¼” Bed height to floor 42 ½” Window size 24”W x 23”H
EQUIPPED WITH:
T-Slotted bed and ram Power ram adjustment Dual hydraulic counter balance of ram Hi/Lo approach speed Adjustable stroke length Fostoria light curtains 300 PSI Thermal transfer oil cooler Air storage tank Lincoln automatic lubrication Dual palm buttons on pedestals Dual 75 HP Pump drives ( top mounted)
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1973 Make - ROCKFORD Model - 40-W
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7317 , Year = 1973 , Make = ROCKFORD , Model = 40-W
Category:OBI Presses
Capacity: 40 Ton 40-W ROCKFORD Flywheel O.B.I Press Model 40-W
Ad #7317
Year:
1973
Make:
ROCKFORD
Model:
40-W
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
5,700 lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item
General Description
40 Ton 40-W ROCKFORD Flywheel O.B.I Press Model 40-W
Capacity: 40 tons Crankshaft diameter at main bearings: 3 3/8" Crankshaft diameter at crankpin: 4 1/2" Distance, bed to gibs 14 1/2" Stroke: 3" Ram adjustment: 3" Shut height to bed: 10 3/4" Slide shank hole 2" dia. x 2 3/4" depth Frame inclining angles: 13º, 26º, 40º Speed: 100 SPM Bed area: 14 1/2" x 26" Slide face area: 81/2" x 17"
EQUIPPED WITH:
Air clutch and brake Weldotron sentry control Flywheel construction Motorized inclining mechanism Dual palms Remote electric foot pedal Production counter Bed bolster Lincoln centro-matic automatic lub.system 3 H.P. 3/60/440 Volt motor w/controls Overall height: 93"
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7317 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6932 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1998 Make - Amada Model - Delta3015
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6916 , Year = 1998 , Make = Amada , Model = Delta3015
Category:Laser
Capacity: 3000 Watt, 5' x 10' Dual Pallet Tables, Flying Optic, Fanuc 16L 32 Bit
Ad #6916
Year:
1998
Make:
Amada
Model:
Delta3015
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
34,000 LBS
Dimension: L x W x H
Machine Location:
City:
On Request
State:
North Carolina
Country:
USA
Price:
$Sold USD
General Description
3000 Watt, 5' x 10' Dual Pallet Tables, Flying Optic, Fanuc 16L 32 Bit CNC Controls
Specification Description MACHINE POSITIONING DESIGN FLYING OPTIC LASER RESONATOR FANUC MAXIMUM LASER CAPACITY 3000 WATT MAXIMUM Y AXIS TRAVEL 120" MAXIMUM X AXIS TRAVEL 60" MAXIMUM Z AXIS TRAVEL 7.9" NUMBER OF TABLES 2 TYPE OF CNC CONTROL FANUC 16L 32 BIT RAPID TRAVERSE RATE N/A AUTOMATIC SHEET REPOSITIONING NO
Equipped With: Fanuc 16L 32 Bit CNC Controls, Fanuc 3000 Watt Laser, Dual Pallet Shuttle Tables, Flying Optic Cantelever Design, 5" & 7.5" Non-Contact Cutting Head, Auto Focus, Programmable High Pressure Assist Cutting, Chiller Unit, Dust Collector.
NOTE: FANUC LASER WAS REBUILT WITHIN THE LAST 1,600 HOURS.
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
40-200 Amp Output 9' x 30' Air Table 2 Axis Hybrid D80 Control CNC Control needs work Cutting Capacity of 2" thick mild steel edge start Pierce Capacity of 1-1/2" thick mild steel Production Cutting Capacity of 1" thick mild steel piercing Remote High Frequency Control Remote Current Control Gas Console
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1985 Make - LINDE Model - CM350-9
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7649 , Year = 1985 , Make = LINDE , Model = CM350-9
Category:Plasma
Capacity: LINDE PLASMA/FLAME CUTTING SYSTEM
Ad #7649
Year:
1985
Make:
LINDE
Model:
CM350-9
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Mid West
Country:
USA
Price:
$Sold USD
General Description
LINDE PLASMA/FLAME CUTTING SYSTEM
AREA OF WATER TABLE ................... 114´´ X 108´´ CENTER DISTANCE BETWEEN RAIL .......... 11'4´´ CUTTING WIDTH ......................... 111´´ CONTROL MODEL ......................... LINDE #UCNC-8 WATER TABLE MFG ......................ANDERSON ENGINEERING NUMBER OF LINDE PLASMA UNITS: ......... 2 TYPE .................................. 200-3 P/N ................................... #677740 SERIAL ................................ #X85C-14687 & #F85K-50166 PLASMA CONTROL ........................ #PCC-8 LINDE POWER SUPPLIES .................. 2 TYPE .................................. PLASMARC #PHC-601 P/N ................................... #677330 SERIAL ................................ #F85K-50165 INPUT ................................. 380/415/460 VOLT - 50/60 CYCLE OUTPUT ................................ 420 VCU MAX. - 250 VOLT - 600 AMP
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7503 , Year = 1996 , Make = Omax , Model = 2652
Category:Water Jet
Capacity: 1996 Omax 2652 26" x 52" Water Jet Cutter
Ad #7503
Year:
1996
Make:
Omax
Model:
2652
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
26" x 52" Cutting Area 2004 Meyer P-2040 20 hp 42k psi Bare Shaft Pump (1500 Hrs) PC Based CNTL New Maxjet 5 Cut. Head Hi/Low Bypass Valve 2004 Omax Sofware Installed VIDEO AVAILABLE UPON REQUEST
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Cutting Area: 26" x 52" Pump: 2004 Meyers P-2040 Bare Shaft Crank Case & Pump 20hp, 42,000 psi New Charge Pump New Hi/Low Pressure Bi-Pas Valve Recently Added New MaxJet 5 Abrasive Cutting Head All Software Updated by Omax in '04 PC Based Control Programmable Z-Axis HOURS: Approximately 2,000 Hours
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 2002 Make - Calypso Model - Shark
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7502 , Year = 2002 , Make = Calypso , Model = Shark
Category:Water Jet
Capacity: 2002 Calypso 6' x 12' Water Jet Cutter
Ad #7502
Year:
2002
Make:
Calypso
Model:
Shark
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
Calypso Shark 6'x12' Dual Abrasive Cutting Head 55k psi 100h.p. Pump EBBCO Polishing System
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Work Envelope 6' x 12' Dual Abrasive Cutting Head Option EBBCO Closed Loop Polishing System # CLS-141 Thermal Care AccuChiller Stand Alone Control Unit with PC & Monitor WS100 High Pressure Waterjet Pumping System Design Pressure: 60,000 PSI Max. Operating Pressure: 55,000 PSI Flow: 2 GPM Motor: 100HP Motor Speed: 1800 RPM @ 60HZ Intensifier Cycle Rate: 20Cycles/Minute @ Max. Flow Rate
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7314 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Full enclosure F.V.N.R. starter with disconnect Water Solenoid valve Fully automatic controls and sensors Motor speed 1790 RPM Synthetic oil capacity 27.7 gallons 100 H.P. 3/60/230-460 volt TEFC motor
Load hours: 18,723 Dimensions: 141”L x 64”W x 70”High
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6714 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6058 when Inquiring
Asking Price: $SOLD
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1992 Make - STARRETT Model - RMS-1620-12B
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7319 , Year = 1992 , Make = STARRETT , Model = RMS-1620-12B
Category:Coordinate Measuring Machine, (CMM)
Capacity: RMS-1620 STARRETT Coordinate Measuring Machine with Roi optical probe
Ad #7319
Year:
1992
Make:
STARRETT
Model:
RMS-1620-12B
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$Sold USD
General Description
RMS-1620 STARRETT Coordinate Measuring Machine with Roi optical probe, Model RMS-1620-12B, (certified through 6/30/06)
Capacity 16” x 20” Vertical capacity 12”
EQUIPPED WITH:
Grey granite Surface plate Stand PH8 Renishaw universal probe System S/n D66646 Roi 150 optical video probe system with ram optical illuminator; 3000 cross hair generator, CL120 Panasonic digital screen Post with ball Starrett remote keypad Air bearings with filter Manual operation
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6846 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6854 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6843 when Inquiring
Asking Price: $Sold
Buyers Premium:A 7 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1991 Make - Van Dorn Model - 300-HT
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6867 , Year = 1991 , Make = Van Dorn , Model = 300-HT
Category:Injection Molding Machines
Capacity: 1991 Van Dorn 300-HT Injection Molder
Ad #6867
Year:
1991
Make:
Van Dorn
Model:
300-HT
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
28,200 lbs
Dimension: L x W x H
23' x 5'2" x 7'8"
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item
General Description
1991 Van Dorn 300-HT Injection Molder
Platen Size 37" x 37" Distance Between Tie Rods 25" x 25" Injection Pressure 23,264 PSI Max Open Daylight 49" Ejector Stroke 6" Pump Motor 50 HP EL Control HKO CP Tonnage: 300.0 Shot Size: 20
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6867 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6865 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6855 when Inquiring
Asking Price: $Sold
Buyers Premium:A 7 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6850 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1998 Make - Sandretto Model - S/8/225
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6869 , Year = 1998 , Make = Sandretto , Model = S/8/225
Category:Injection Molding Machines
Capacity: 1998 Sandretto S/8/225 Injection Molder
Ad #6869
Year:
1998
Make:
Sandretto
Model:
S/8/225
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$sold USD
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item
General Description
1998 Sandretto S/8/225 Injection Molder
Distance Between Tie Bars 22.40" x 22.40" Platen Size 30.3" x 30.3" Clamp Stroke 24.50" Max Daylight 53.20" Ejector Stroke 8.66" SEF90 Control CP RI Tonnage: 225.0 Shot Size: 11.75
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6869 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6860 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6836 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6835 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 1984 Make - Hayssen Model - 115200 CD 1000
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6837 , Year = 1984 , Make = Hayssen , Model = 115200 CD 1000
Category:Blow Molding Machines
Capacity: 1984 Hayssen 115200 CD 1000 Blow Molder
Ad #6837
Year:
1984
Make:
Hayssen
Model:
115200 CD 1000
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
1984 Hayssen 115200 CD 1000 Blow Molder
Dual Head 2.50 # Shot Capacity 90mm Extruder 200 hp Moog 20pt. Liberty (2) Lane Cooling Bed (1) Liberty Trimming Station (1) Leak Detector Producing 4.2 Gallon Cooking Oil Containers Set up for 5 Gallon Containers
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6834 when Inquiring
Asking Price: $sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1995 Make - Engel Model - ES 700-200
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6379 , Year = 1995 , Make = Engel , Model = ES 700-200
Category:Injection Molding Machines
Capacity: Engel, ES 700-200, 200 Ton, Injection Molding Machine
Ad #6379
Year:
1995
Make:
Engel
Model:
ES 700-200
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Arizona
Country:
USA
Price:
$Sold USD
General Description
Platen 30.71" x 27.36" Tie Bars 21.26" x 18.11" Clamp Stroke 18.11" Min/Max Mold Height 5.91"/22.05" Max Daylight 40.16" Stroke 5.91" CC 90 Control HKO CP RI Ton: 200.0 Shot Size: 18.0
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1999 Make - JSW Model - J200EII-SP
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6375 , Year = 1999 , Make = JSW , Model = J200EII-SP
Category:Injection Molding Machines
Capacity: JSW, J200EII-SP, 200 Ton, Injection Molding Machine
Ad #6375
Year:
1999
Make:
JSW
Model:
J200EII-SP
Condition:
Very Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Arizona
Country:
USA
Price:
$Sold USD
General Description
Distance Between Tie Bars 20.1" x 20.1" Platen Size 29.5" x 29.5" Max Daylight Opening 40.94" Opening Stroke (Max) 17.3" Ejector Force x Stroke 4.84" x 5.12" Min Mold Size (H x V) 11.8" x 11.8" Syscom Controller HKO Ton: 200.0 Shot Size: 3.7
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6360 when Inquiring
Asking Price: $Sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6347 when Inquiring
Asking Price: $sold
Buyers Premium:A 5 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Tie Bar Spacing 25.2" x 24.6" Platens 36.8" x 36.2" Clamp Toggle Clamp Stroke 22.8" Daylight Max/Min 48"/7.9" Mold HT MAx/Min 25.2"/7.9" Camac VCL Control HKO Air Blow CP RI Tonnage: 300.0 Shot Size: 16
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Tonnage 300 Ton Shot Size 16 oz Tie Bar Spacing 25.2" x 24.6" Platens 36.8" x 36.2" Clamp Toggle Clamp Stroke 22.8" Daylight Max/Min 48"/7.9" Mold HT Max/Min 25.2"/7.9"
Equipped With Camac VLC Control HKO, Air Blow CP, RI
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7556 , Year = 1993 , Make = Toyo , Model = TM300G2
Category:Injection Molding Machines
Capacity: 1993 Toyo TM300G2 Injection Molder
Ad #7556
Year:
1993
Make:
Toyo
Model:
TM300G2
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
29,000 lbs.
Dimension: L x W x H
260" x 64" x 80"
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
Distance Between Tie Bars 28.74" x 28.74" Platen Size 37" x 37" Clamping Stroke 22.83" MoldHeight (Min/Max) 9.84"/25.60" Ejector Stroke 5.51" Voltage 460 PLCS 6 Control CP Tonnage: 300.0 Shot Size: 32.8
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Tonnage 300 Ton Shot Size 32.8 oz Distance Between Tie Bars 28.74" x 28.74" Platen Size 37" x 37" Clamping Stroke 22.83" Mold Height (Min/Max) 9.84"/25.60" Ejector Stroke 5.51" Voltage 460
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 2001 Make - Husky Model - H-225-RS-40
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7558 , Year = 2001 , Make = Husky , Model = H-225-RS-40
Category:Injection Molding Machines
Capacity: 2001 Husky H-225-RS-40 Injection Molder
Ad #7558
Year:
2001
Make:
Husky
Model:
H-225-RS-40
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$sold USD
General Description
Tie Bar spacing 26" x 26" Platen 37.4" x 37.4" Daylight 47.2" Min/Max Mold Height 11"/26" PSI 23,496 Polaris Control Stripper Plate Air Invision System Interface SPC/SQC High Speed Package Tonnage: 225.0 Shot Size: 7.3
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Tonnage 225 Ton Shot Size 7.3 oz Tie Bar Spacing 26" x 26" Platen 37.4" x 37.4" Daylight 47.2" Min/Max Mold Height 11"/26" PSI 23,496
Equipped With Polaris Control Stripper Plate Air Invision System Interface SPC/SQC High Speed Package
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1998 Make - Husky Model - GL-225/RS50
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7557 , Year = 1998 , Make = Husky , Model = GL-225/RS50
Category:Injection Molding Machines
Capacity: 1998 Husky GL-225/RS50 Injection Molder
Ad #7557
Year:
1998
Make:
Husky
Model:
GL-225/RS50
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
31,658 lbs
Dimension: L x W x H
254.9" x 81.9"
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
Tie Bar Spacing 24.4" x 24.4" Platen SIze 35.7" x 36.5" Ejector Stroke 5.9" Daylight (Max) 57.1" Shut Height (Min/Max) 16.7"/30.5" Clamp Stroke 26.6" Siemens Control Air Blow Excessive Cycle time (if shot is not made) Accumulators Special Shut Height (see above specs) SPC.SQC Tonnage: 250.0 Shot Size: 10
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Two (2) 1998 250 Ton, 10 oz. HUSKY GL-225/RS50
Tonnage 250 Ton Shot Size 10 oz Tie Bar Spacing 24.4" x 24.4" Platen Size 35.7" x 36.5" Ejector Stroke 5.9" Daylight (Max) 57.1" Shutheight (Min/Max) 16.7"/30.5" Clamp Stroke 26.6"
Equipped With Siemens Control Air Blow Excessive Cycle time (if shot is not made) Accumulators Special Shut Height (see above specs) SPC/SQC
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Distance Between Tie Bars 22.05" x 22.05" Platen Size 30.71" x 30.71" Clamp Stroke 18.54" Mold Height (Min/Mx) 7.87"/19.69" Ejector Stroke 4.72" Electrics 460 Volt PLCS-9 Color Touch Panel Control HKO< CP Tonnage: 200.0 Shot Size: 11
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Two (2) 1996/97 200 Ton, 13.1 oz. Toyo Plastar
Capacity Tonnage 200 Ton Shot Size 11/13.01 Distance Between Tie Bars 22.05" x 22.05" Platen Size 30.71" x 30.71" Clamp Stroke 18.54" Mold Height (Min/Max) 7.87"/19.69" Ejector Stroke 4.72" Electrics 460 Volt Equipped With PLCS-9 Color Touch Panel Control HKO CP 1997 $39,500.00 1996 $36,500.00
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Tie Bar Spacing 18 1/8" x 18 1/8" Platen Size 26.75" x 26.75" Screw Diameter 50MM "B" Size Clamp Stroke 18.5" Daylight Max 26.4" Min Mold Height 16.1" Ejector Stroke 3.9" Electrics 460 Volt NC9000G Cntrl HKO Air Eject CP RS 232 Port Ref No: Tonnage: 177.0 Shot Size: 11.8
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Tonnage 177 Tons Shot Size 11.8 oz Tie Bar Spacing 18-1/8" x 18- 1/8" Platen Size 26.75" x 26.75" Screw Diameter 50 MM "B" Size Clamp Stroke 18.5" Daylight Max 26.4" Min Mold Height 16.1" Ejector Stroke 3.9" Electrics 460 Volt
Equipped With: NC9000G Control HKO Air Eject CP RS 232 Port
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7555 , Year = 2001 , Make = Toyo , Model = SI-300
Category:Injection Molding Machines
Capacity: 2001 Toyo SI-300 Injection Molder
Ad #7555
Year:
2001
Make:
Toyo
Model:
SI-300
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
Platen Size 37" x 37" Distance Between Tie Bars 28.74" x 28.74" Clamp Stroke 22.3" Max Mold Height 23.62" Max Daylight 46.45" Min Mold Height 9.84" PLCS 9 Control 21,000 Hours Tonnage: 300.0 Shot Size: 32.8
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Tonnage 300 Ton Shot Size 32.8 oz Platen Size 37" x 37" Distance Between Tie Bars 28.74" x 28.74" Clamp Stroke 22.83" Max Mold Height 23.62" Max Daylight 46.45" Min Mold Height 9.84"
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Tie Bar Spacing 28.3" x 28.3" Platen Size 40.8" x 41.9" Ejector Stroke 5.9" Daylight (Max) 64.9" Clamp Stroke 30.5" Clamp Shut Height (Min/Max) 16.7"/34.4" Siemens Control SPC/SQC Package Safety Drop Bar 200MM Machine Risers Full SPI Pattern 1 Hyd Function on Moving Platen SPI Robot Interface High Torque Screw Drive Special Paint (Ibsen Ivory) 2 Air Circuts (High & Low Pressure) Excessive Cycle Time Seq In Mold Ejection Software Tonnage: 330.0 Shot Size: 28
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Tonnage 330 Ton Shot Size 28 oz Tie Bar Spacing 28.3" x 28.3" Platen Size 40.8" x 41.9" Ejector Stroke 5.9" Daylight (Max) 64.9" Clamp stroke 30.5" Clamp Shut Height (Min/Max) 16.7"/34.4"
Equipped With Siemens Control SPC/SQC Package Safety Drop Bar 200MM Machine Risers Full SPI Pattern 1 Hyd Function on Moving Platen SPI Robot Interface High Torque Screw Drive Special Paint (Ibsen Ivory) 2 Air Circuts (High & Low Pressure) Excessive Cycle Time Seq In Mold Ejection Software
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 2000 Make - Nissei Model - FN-6000
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7548 , Year = 2000 , Make = Nissei , Model = FN-6000
Category:Injection Molding Machines
Capacity: 2000 Nissei FN-6000 Injection Molder
Ad #7548
Year:
2000
Make:
Nissei
Model:
FN-6000
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$sold USD
General Description
Tie Bar Spacing 26" x 26" Daylight 45.3" Clamp STroke 32.7" Mold Thickness 12.6" NC9300 T Control HKO RI Tonnage: 308.0 Shot Size: 6.7
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Tonnage 308 Ton Shot Size 6.7 oz Tie Bar Spacing 26" x 26" Daylight 45.3" Clamp Stroke 32.7" Mold Thickness 12.6"
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Tie Bar Spacing 58.9" x 28.9" Platen 39.4" x 39.4" Clamp Toggle Clamp Stroke 25.6" Daylight max/Min 53.15"/9.84" Mold Height Max/Min 27.56" x 9.84" VSX Control RI Air Blow Tonnage: 440.0 Shot Size: 54
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Two (2) 1997/96 440 Ton, 54 oz. Cincinnati VT440-54
Tonnage 440 Ton Shot Size 54 oz Tie Bar Spacing 28.9" x 28.9" Platen 39.4" x 39.4" Clamp Toggle Clamp Stroke 25.6" Daylight Max/Min 53.15"/9.84" Mold Height Max/Min 27.56" x 9.84"
Equipped With VSX Control RI Air Blow Prices 1997-$69,500.00/1996-$62,500.00
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Screw Diameter 2.364" Max Clamp Stroke 23.64" Min/Max Mold Height 9.85"/27.58" Ejector Stroke 8.86" Platen Dimensions 37.03" H x 34.67" V Tie Bar Spacing 24.82" H x 22.45" V HKO SPI Robot Interface Tonnage: 330.0 Shot Size: 26.82
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Two (2) 2004 330 Ton, 26.82 oz. NEGRI-BOSSI VE-300-1700
Tonnage 330 US Tons Shot Size 26.82" Screw Diameter 2.364" (60mm) Max Clamp Stroke 23.64" Min / Max Mold Height 9.85" / 27.58" Ejector Stroke 8.86" Platen Dimensions 37.03"H x 34.67" V Tie Bar Spacing 24.82" H 22.45" V
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Tie Bar Spacing 28.3" x 28.3" Platen Size 40.8" x 41.9" Ejector Stroke 5.9" Daylight (Max) 64.9" Clamp Stroke 30.5" Clamp Shut Height Min/Max) 16.7"/34.4" Siemens Control SPC/SQC Package Safety Drop Bar 200MM Machine Risers Full SPI Pattern 1 Hyd Function on Moving Platen SPI Robot Interface High Torque Screw Drive Special Paint (Ibsen Ivory) 2 Air Circuts (High & Low Pressure) Excessive Cycle Time Seq In Mold Ejection Software MSI Controller Interface Visual Monitoring System Tonnage: 330.0 Shot Size: 10.1
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
One (1) 1999 330 Ton, 10.1 oz. HUSKY GL-300RS50/42
Tonnage 330 Ton Shot Size 10.1 oz Tie Bar Spacing 28.3" x 28.3" Platen Size 40.8" x 41.9" Ejector Stroke 5.9" Daylight (Max) 64.9" Clamp stroke 30.5" Clamp Shut Height (Min/Max) 16.7"/34.4"
Equipped With Siemens Control SPC/SQC Package Safety Drop Bar 200MM Machine Risers Full SPI Pattern 1 Hyd Function on Moving Platen SPI Robot Interface High Torque Screw Drive Special Paint (Ibsen Ivory) 2 Air Circuts (High & Low Pressure) Excessive Cycle Time Seq In Mold Ejection Software MSI Controller Interface Visual Monitoring System
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Screw Diameter 2.75" Max Clamp sTroke 27.9" Min/Max Mold Height 11.82"/29.55" Ejector Stroke 10.8" Platen Dimensions 42.15" x 39" Tie Bar Spacing 27.97" x 24.82" HKO SPI Robot Interface Tonnage: 407.0 Shot Size: 37.4
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
One (1) 2004 407 Ton, 37.4 oz. NEGRI-BOSSI VE-370-H2300
Capacity 407 US Tons Shot Size 37.4 oz Screw Diameter 2.75" (70mm) Max Clamp Stroke 27.9" Min/ Max Mold Height 11.82" / 29.55" Ejector Stroke 10.8" Platen Dimensions 42.15" H x 39" V Tie Bar Spacing 27.97" H x 24.82" V
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Tie Bar Spacing 28.9" x 28.9" Platen 39.4" x 39.4" Tie Bar Spacing 28.9" x 28.9" Clamp Toggle Clamp Stroke 25.6" Daylight Max/Min 53.15"/9.84" Mold Height Max/Min 27.56' x 9.84" VSX Control HKO CP 32,887 Hours Tonnage: 440.0 Shot Size: 54
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Tonnage 440 Ton Shot Size 54 oz Tie Bar Spacing 28.9" x 28.9" Platen 39.4" x 39.4" Clamp Toggle Clamp Stroke 25.6" Daylight Max/Min 53.15"/9.84"
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Tie Bar Spacing 41.7" x 41.7" Platen 60.2" x 60.2" Min/Max Daylight 19.7"/88.5" Clamp Stroke 68.9" Injectvisor S10 Control Dual CP Motion no Motion Air Blow Tonnage: 950.0 Shot Size: 183
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Tonnage 950 Tons Shot Size 183 oz Tie Bar Spacing 41.7" x 41.7" Platen Size 60.2" x 60.2" Min/Max Daylight 19.7" / 88.5" Clamp Stroke 68.9"
Equipped With: Injectvisor S10 Control Dual Core Pull Motion No Motion Air Blow
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7523 , Year = , Make = Uniloy , Model = 350R2
Category:Blow Molding Machines
Capacity: Uniloy Model 350R2 Blow Molders
Ad #7523
Year:
Make:
Uniloy
Model:
350R2
Condition:
Very Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
Package Available Includes (2) Machines (1) Gallon Molds Foremost Blending System (2) 70 Ton Chillers Head Tooling
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Two (2) Uniloy Model 350R2 Machines Available
Includes Support Equipment & Molds Machines (2) Uniloy Dairy Blow Molders Model 350R2 Number Of Heads 4 Head Center Spacing 8" Screw Size 3.5" L/D Ratio 24:1 Clamp Tonnage 90 Tons Controls PLC ONE UNIT IS UNDER POWER / 2ND MACHINE NEW DRIVE MACHINE PRICES: $95,000.00 / $85,000.00 Includes (8) Dairy Gallon Molds $35,000.00 for PKG. New Foremost Blending System $41,000.00 2 - 70 Ton Air Cooled Chillers $14,500.00 EA. New Head Tooling $8500.00 PACKAGE PRICE $285,000.00 Photos Available
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
20mm 54:1 L/D Ration 10 HP 5 Electrical Barrel Heater Zones "46 Hours of use"
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Screw Size 20 mm L/D Ratio 54:1 Vented or Non (may be plugged) Vented Heated Electrical Heated Barrel Heater Barrel Zones 5 Horsepower 10 @ 500 rpms Control Cabinet Attached on Stand Ammeters Electrics 460v / 3 ph / 60 hz Includes Vacuum System-New water ring vacuum pump 1.5 HP Motor Pump Vacuum Gage, Flow Meter, & adjusting Valve Rated @ 15 cfm @ 27" Hg Flow - 0.9 gpm Electrical 230v / 3 ph / 60hz Water Requirement For Exchange Cooling 5 GPM
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1996 Make - Van Dorn Model - 500HP80F
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7539 , Year = 1996 , Make = Van Dorn , Model = 500HP80F
Category:Injection Molding Machines
Capacity: 1996 Van Dorn 500HP80F Injection Molder
Ad #7539
Year:
1996
Make:
Van Dorn
Model:
500HP80F
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Arizona
Country:
USA
Price:
$Sold USD
General Description
Platen Dimension 47" x 47" Tie Bar Spacing 32.5" x 32.5" Ejector Stroke 6" Clamp Stroke 38" Daylight Max 68" w/Ejector Stroke Plate Removed Min Mold Height 12 Pathfinder 4500 Control CP Motion no Motion Robot Interface Tonnage: 500.0 Shot Size: 80
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Capacity Tonnage 500 Tons Shot Size 80 oz Platen Dimensions 47" x 47" Tie Bar Spacing 32.5" x 32.5" Ejector Stroke 6" Clamp Stroke 38" Daylight Max 68" w/Ejector Plate Removed Min Mold Height 12 Equipped With Pathfinder 4500 Control CP Motion no Motion Robot Interface
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1995 Make - Van Dorn Model - 700 HP 125F
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7537 , Year = 1995 , Make = Van Dorn , Model = 700 HP 125F
Category:Injection Molding Machines
Capacity: 1995 Van Dorn 700 HP 125F Injection Molder
Ad #7537
Year:
1995
Make:
Van Dorn
Model:
700 HP 125F
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
82,000 lbs
Dimension: L x W x H
33.7' x 7.4' x 10'
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
Tie BAr Spacing 36.5" x 36.5" Max Clamp Stroke 44" Max Daylight 72.75" Platen Size 62" x 53.5" Ejector Stroke 10.82" Pathfinder 4500 Control CP Two Stage Air Eject SPI Robot Interface Motion/No motion Conair HARMO Robot Modle HIM-400SWK 35,500 Run Hours !!VIDEO AVAILALBE!! Tonnage: 700.0 Shot Size: 125
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Two (2) 1995 700 Ton, 125 oz. VAN DORN 700-HP-125F
Tonnage 700 Tons Shot Size 125 oz Tie Bar Spacing 36.5" x 36.5" Max Clamp Stroke 44" Max Daylight 72.75" Platen Size 62" x 53.5" Ejector Stroke 10.82"
Equipped With: Pathfinder 4500 Control Core Pull Two Stage Air Eject SPI Robot Interface Motion / No Motion Option Conair HARMO Robot Model HIM-400SWK Hours: 35,500 Run Hours !!! VIDEO AVAILABLE !!!
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Two (2) 1993 NFM Welding Engineers Single Screw Extruder Used for Compounding Screw Size 3.5" L/D Ratio 32:1 Cooled Air Vented Or non Yes Horsepower 150 DC Drive Gear Box Ratio 13:1 Materials Ran Polyolefins & PE Screw Type Single Stage Barrel Xaloy 800 Includes Berringer Screen Changer, Stainless Steel Feed Hopper Die Body, and Misc Die Plates
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1998 Make - Van Dorn Model - 1000 HP 80
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7533 , Year = 1998 , Make = Van Dorn , Model = 1000 HP 80
Category:Injection Molding Machines
Capacity: 1998 Van Dorn 1000 HP 80 Injection Molder
Ad #7533
Year:
1998
Make:
Van Dorn
Model:
1000 HP 80
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
Distance Between Tie Bars 44" x 44" Platen Size 65" x 65" Open Daylight Max 74" Clamp Stoke Max 50" Pathfinder 3000 Cotnrol HKO CP RI Premium Filtration Machine can be upgraded to 260 oz Tonnage: 1000.0 Shot Size: 80
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Capacity Tonnage 1000 Ton Shot Size 80 oz Distance Between Tie Bars 44" x 44" Platen Size 65" x 65" Open Daylight Max 74" Clamp Stroke Max 50"
Equipped With Pathfinder 3000 Control HKO CP RI Premium Filtration Machine can be upgraded to 260 oz
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1999 Make - Van Dorn Model - 700HP4300
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7538 , Year = 1999 , Make = Van Dorn , Model = 700HP4300
Category:Injection Molding Machines
Capacity: 1999 Van Dorn 700HP4300 Wide Platen Injection Molder
Ad #7538
Year:
1999
Make:
Van Dorn
Model:
700HP4300
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
Platen DImensions 62" x 53.5" Distance between Tie Rods (H) 45" x 36.5" Max Clamp Stroke 44" Max Open Daylight 72.75" W/Eject Pl. Removed Min Mold Height 16" Ejector Stroke 6" Pathfinder 5000 Control Wide Platen and Extended Tie Bar Space Dual CP Motion no Motion Robot Interface Feed Throat Temperature Cotnrol HKO Cavity Pressure Control Heat Sensors Pump Lockout Breather Bags Tonnage: 700.0 Shot Size: 89.6
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
One (1) 1999 700 Ton, 89.6 oz. VAN DORN WIDE PLATEN 700HP4300
Tonnage 700 Ton Shot Size 89.6 oz Platen Dimensions 62" x 53.5" Distance Between Tie Rods (H) 45" x 36.5" Max Clamp Stroke 44" Max Open Daylight 72.75" W/Eject Pl. Removed Min Mold Height 16" Ejector Stroke 6"
Equipped With Pathfinder 5000 Control Wide Platen & Extended Tie Bar Space Dual CP Motion No Motion Robot Interface Feed Throat Theperature Control HKO Cavity Pressure Control Heat Sensors Pump Lockout Breather Bags
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Tie Bar Spacing 28.9" x 28.9" Platen 39.4" x 39.4" Clamp Toggle Clamp Stroke 25.6" Daylight Max/Min 53.15"/9.84" Mold Height Max/Min 27.56"/9.84" Camac VEL Control HKO CP RI Air Blow Tonnage: 440.0 Shot Size: 68
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Tonnage 440 Ton Shot Size 68 oz Tie Bar Spacing 28.9" x 28.9" Platen 39.4" x 39.4" Clamp Toggle Clamp Stroke 25.6" Daylight Max/Min 53.15"/9.84" Mold Height Max/Min 27.56" x 9.84"
Equipped With Camac VEL Control HKO, CP, RI Air Blow
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1985 Make - Cumberland Model - 37H-85GRAN 5KN
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7529 , Year = 1985 , Make = Cumberland , Model = 37H-85GRAN 5KN
Category:Plastic Granulators
Capacity: 1985 Cumberland 37H-85GRAN 5KN Granulator with blower
Ad #7529
Year:
1985
Make:
Cumberland
Model:
37H-85GRAN 5KN
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
12000 lbs.
Dimension: L x W x H
100" x 47" x 135"
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
18" x 37" 2 Bed Knives 15 Blade Helical Hog 7/16" Screen Soft Start 150 Horsepower Includes Blower Cyclone
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Feed Throat Opening 18" x 37" Number Of Rotor Knives 15 Blade Helical Hog Number Of Bed Knives 2 Screen Size 7/16" dia. Cutting Circle Diameter 16" Horsepower 150 Soft Start Yes Blower, Cyclone & Conveyor Included 15 HP Blower Electrics 480v Throughput 3000 lbs./HR. Photos available
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1993 Make - Herbold Model - SMS 6060H7-3
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7531 , Year = 1993 , Make = Herbold , Model = SMS 6060H7-3
Category:Plastic Granulators
Capacity: 1993 Herbold MS 60/60 6060H7-3 Granulator
Ad #7531
Year:
1993
Make:
Herbold
Model:
SMS 6060H7-3
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
1993 herbold Granulator SMS 6060H7-3 Refurb. 2006 23" x 28" Throat Size Opening 125 HP Blower Cyclone Soft Start
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
REFURBISHED 2006 Style - Open Rotor Configuration Throat Size Opening 23" x 28" Knives 7 Knife Open Rotor (Optional Blocks can be installed to create solid rotor) Horsepower 125 Screen Size 2 3/8" Blower Horsepower 5 Includes: Cyclone and Stand Details Re: Refurb Motor Inspected (new bearings installed) New Main Rotor Bearings New Fly & Bed Knives and bolts 6" Quick Connect galvanized pipe to connect to cyclone Motor starter contactor for 125 hp motor Machine usage PVC Pipe - Hopper is designed to hold long pieces of - pipe, but could be modified to be shorter Photos available
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Distance Between Tie Bar 38.19" x 38.19" Platen Size 56.5" x 60.3" Max Daylight 78.7" Min/Max Mold 11"/39.4" Camac 486 Control Single CP Air Blow Tonnage: 725.0 Shot Size: 116
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Capacity: Tonnage 725 Ton Shot Size 116 oz Distance Between Tie Bar 38.19" x 38.19" Platen Size 56.5" x 60.3" Max Daylight 78.7" Min/Max Mold 11"/39.4" Equipped With: Camac 486 Control Single Core Pull Air Blow
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7530 , Year = , Make = Cumberland , Model =
Category:Plastic Granulators
Capacity: Cumberland Granulator
Ad #7530
Year:
Make:
Cumberland
Model:
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
Cumberland Granulator Throat Size 24" x 18" Bed Knives 2 Rotor Knives 3 HP 75 Air Flow 137 CHM
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Granulator # 1 Cumberland Open Rotor Throat Size Opening 24" x 18" Rotor Knives 3 Bed Knives 2 Rotor & Bed Knives 28" Horsepower 75 Filter System Design Pressure 20 HG. 30 Sqaure Feet Cloth Filter Air Flow 137 CHM 5 3/4" 60 lb bags Holding Silo 45" x 32" High Positive Displacement Blower 5 hp Sutorbilt (brand) Conveyor 13' L x 20" Wide Silo Acuator Premier Pneumatics 15" Photos available
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1995 Make - Van Dorn Model - 1000 HP 165F-ELP
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7532 , Year = 1995 , Make = Van Dorn , Model = 1000 HP 165F-ELP
Category:Injection Molding Machines
Capacity: 1995 Van Dorn 1000 HP 165F-ELP Injection Molder
Ad #7532
Year:
1995
Make:
Van Dorn
Model:
1000 HP 165F-ELP
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
Platen 73" x 65" Tie Bar Distance 52" x 44" Clamp Style Hydraulic Daylight Min/Max 12"/74" Ejector Stroke 8" Motors (2) @ 100 HP Pathfinder 2500 Control Wide Platen CP Motion no Motion Robot Interface Mold Ejector Tonnage: 1000.0 Shot Size: 165
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Tonnage 1000 Ton Shot Size 165 oz Platen 73" x 65" Tie Bar Distance 52" x 44" Clamp Style Hydraulic Daylight Min/Max 12"/74" Ejector Stroke 8" Motors (2) @ 100 HP
Equipped With Pathfinder 2500 Control Wide Platen CP Motion no Motion Robot Interface Mold Ejector
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Distance Between tie Bars 38.19" x 38.19" Platen Size 56.5" x 60.3" Max Daylight 78.7" Min/Max Mold 11"/39.4" Camac VSX Control Motion no Motion CP Air Blow Tonnage: 725.0 Shot Size: 140
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Tonnage 725 Ton Shot Size 140 oz Distance Between Tie Bars 38.19" x 38.19" Platen Size 56.5" x 60.3" Max Delight 78.7" Min/Max Mold 11"/39.4"
Equiped With Camac VSX Control Motion no Motion CP Air Blow
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Capacity: Davis Standard Thermatic 350II-F6251 Extruder
Ad #7525
Year:
Make:
Davis Standard
Model:
Thermatic 350II-F6251
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
Davis Standard Thermatic 350 II-F6251 Single Screw Extruder Screw Size 3.5" L/D Ratio 24:1 Barrel Zones 5 Cooled Air HP 75 Includes Control Panel
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Single Screw Extruder Screw Size 3.5" L/D Ratio 24:1 Barrel Zones 5 Cooled Air Horsepower 75Includes Control Panel Photos available
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Capacity: NRM Pacemaker 70 Model Blown Film Extruder
Ad #7528
Year:
Make:
NRM
Model:
Pacemaker 70
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
NRM Pacemaker 70 3.5" 24:1 L/D Ratio 14" Rotational Bubble Extrusion Die Refurb. Line Complete System with tower
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
COMPLETE BLOWN FILM Extruder Screw Size 3.5" L/D Ratio 24:1 Barrel Zones 5 Controls Barber Coleman 520 Includes 1998 Maguire Model 4 Compartment wt. scale Blender with MPI Digital Scale System 50# Hopper 1996 Alpha Marathon Model M48-14DL 14" Rotational Bubble Extrusion Die w/ bubble gas - Cage Stabilizer New York Blow Company 20 HP Blowe System Custom Mfg. 68" Primary Nip assembly 1985 Reifenhauser Mdl. WF1600 Max Width 1600 mm Slitter / Winder with 5 splitting heads Quick Draft 3 hp trim removal blower system ***** INCLUDES ENTIRE TOWER ASSEMBLY Photos available
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Accumulator Blow Molder Number Of Heads 2 Shot Size Capacity (lbs) 10 Head Centerline Distance 24" Extruder Screw Size 4.5" L/D Ratio 24:1 Approximate Output 750 lbs/hour Drive HP 150 hp/DC Drive Hydraulic Unit Horsepower 60 Platen Size 32" x 62" Clamp Tonnage (US Tonnage) 75 Daylight 46.5" Plate Thickness 4" Guide Rods 5" Controls Maco Base Width 9' Base Length 23' Base Height 7.5' Head tools 6" Photos available
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7522 , Year = 1993 , Make = Sterling , Model =
Category:Blow Molding Machines
Capacity: 1993 Sterling Blow Molder
Ad #7522
Year:
1993
Make:
Sterling
Model:
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
Dual Head 15# Shot Capacity 32" Centerline 4.5" Extruder 60" x 81" Platen Maco Controls
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Accumulator Style Blow Molder # Of Heads 2 Head Shot Capacity (lbs) 15 Head Centerline 32" Extruder Screw Size 4.5" L/D Ratio 24:1 Horsepower 150 DC Drive Approximate Output 900 lbs./hr. Hydraulic Unit HP 40 Platen Size 60" x 81" Clamp Tonnage (US Tonnage) 180 Daylight 66" Platen Thickness 4.75" Guide Rods 6" Controls Maco Base Width 10' Base Length 21' 6" Base Heitght 11' Head Tooling 8" Photos available
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1992 Make - Nissei Model - ASB 650 EXIID
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7518 , Year = 1992 , Make = Nissei , Model = ASB 650 EXIID
Category:Blow Molding Machines
Capacity: 1992 Nissei Model ASB 650 EXIID Blow Molder
Ad #7518
Year:
1992
Make:
Nissei
Model:
ASB 650 EXIID
Condition:
Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
One Step PET bottle machine (does perform & blow molding) Dual 84 mm extruders Omron Controls
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
One Step PET Bottle Machine Extruders Dual Extruders Extruder Screw Sizes 84 mm Clamp Tonnage 100 tons Heater & Timer Controls Omron Current Mold Set Up - (8) 32 ounce, 50 mm neck - juice containers Includes Bottle Stand up equipment, 10" wide REX chain - conveyor All manuals & maintenance records Spare parts Machine has also ran the following bottles: 8 oz. - 24 mm neck, up to 1 gallon - 120 mm neck Photos available Under power
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1988 Make - Magic Model - MG-L5/D
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7517 , Year = 1988 , Make = Magic , Model = MG-L5/D
Category:Blow Molding Machines
Capacity: 1988 Magic Model MG-L5/D Blow Molder
Ad #7517
Year:
1988
Make:
Magic
Model:
MG-L5/D
Condition:
Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
Recently Rblt Single Head 100 mm Screw 20:1 L/D HDPE with (2) Single Cavity 4 Liter Molds
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Head(s) Single head with curved neck mounted on single flange. Single Channel/Head Mechanical weight adjustmant Extruder Screw Size 100 mm L/D Raio 20:1 Screw Type HDPE Brushless AC Motor & Digital Inverter (includes access ladder and hand rail on extruder - platform) Knife Pneamatically operated cold knife for parison cutting Deflashing (3) Station deflashing system Material Handling Horizontal Scrap Conveyors Incline Scrap Conveyor to granulator Gravimetric Weigh Blender to mix virgin, color & regrind Maguire, WSB-100 Series Vacuum Loading System - (4) loaders to convey scrap- Wittmann virgin, and colorant to blender High Speed single head leak tester Tooling Includes (2) single 4 liter bottle Molds Photos available Under power
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1995 Make - Cincinnati Model - E75-D-25
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7515 , Year = 1995 , Make = Cincinnati , Model = E75-D-25
Category:Blow Molding Machines
Capacity: 1995 Cincinnati E75-D-25 Blow Molder
Ad #7515
Year:
1995
Make:
Cincinnati
Model:
E75-D-25
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
Dual Head 2.5 # Shot Capacity 3" Extruder 26" H x 39" V Platen Camac 486
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Accumulator Head Blow Molder Number Heads 2 Shot Size Capacity 2.5 lbs Clamp Force 50 Ton Distance Between Tie bars 26" H x 39" V Max Open Daylight 35-40" Min. Daylight Closed 15-20" Shut Height Adjustment 5" Clamp Stroke 20" ExtruderScrew Size 3" L/D Ratio 24:1 Standard output in HDPE 375 lbs/hr Side mounted part takeaway unit Hydraulic Servo Controlled Tooling Stripper Air Operated Needle Blow Circuits Prepinch softward Controls Camac 486 Electrics - 460v / 3 / 125 - 31.5 - 90 amps
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7516 , Year = , Make = Jomar , Model = Model 85
Category:Blow Molding Machines
Capacity: Jomar Model 85 Blow Molder
Ad #7516
Year:
Make:
Jomar
Model:
Model 85
Condition:
Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
Jomar 85 Injection Blow Molding Machine
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Injection Blow Machine Preform Clamp Force 72.1 Tons Blow Clamp Force 17 Tons Shut Height 10" Press Stroke 5" Extruder Screw Size 2.5" L/D Ratio 24:1 Maximum Shot Capacity (PVC) 225 grams Horsepower 75 Trigger Bar Size 21" Photos available
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7514 , Year = 1991 , Make = Bekum , Model = 602D
Category:Blow Molding Machines
Capacity: 1991 Bekum 602D Blow Molder
Ad #7514
Year:
1991
Make:
Bekum
Model:
602D
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
"Only 15000 Hours" Single Head 4 x 85 mm Head Size 85 mm Centerline 3 x 60 mm Extruder 40 HP Platen 740 mm x 440 mm Maco 6
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Number Of Heads 1 Head Size 4 x 85 mm Head Centerline 85 mm Extruder Screw Size 3 x 60 mm Extruder Ratio 24:1 Screw Type Pineapple Mixer Gear Box s-633-s Gear Box Ratio 2.17:1 Drive HP 30 / Power tec Hydraulic Unit HP (Lincoln) 40 hp main / 5 hp aux. Platen Size 470 mm x 440 mm Tonnage 11.2 Daylight 220 mm Platen Thickness 3 1/8" Front Controls Maco 6 Run Hours 15225 Photos available
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
1983/84 (2) Battenfield Fischer, Mdl. 054-1 Single Head(s) 125 mm Head Centerline 60mm/90mm Extruder 19:1 / 24:1 40/60 HP 250 mm x 400 mm Platen Maco 6 Controls VERY CLEAN!
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Two (2) 1983/84 Battenfeld Fischer FHB 054-1
1983 UnitNumber Of Heads 1 Head Centerline 125 mm Extruder Size 90 mm L/D Ratio 19:1 Screw Type Pineapple mixer Horsepower 60 Platen Size 250 mm x 400 mm Controls Maco 6 1984 Unit Number Of Heads 1 Head Centerline 125 mm Head Size Single Parison Extruder Size 80 mm L/D Ratio 24:1 Screw Type Pineapple mixer Horsepower 40 Platen Size 360 mm x 510 mm Controls Maco Photos available
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
1984 Battenfield Fischer Mdl. FHB 106-1 Single Head (5) Parison Head Centerline 70 MM Extruder size 80 MM 24:1 L/D 360 mm x 510 mm Platen Size Controls Maco 6 VERY CLEAN & UNDER POWER!
* All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
Continous Extrustion Blowmolder Number Of Heads 1 Head Size 5 Parison Head Centerline 70 mm Extruder Size 80 mm Extruder Ratio 24:1 Screw Type Pineapple Mixer Drive HP 60 Hyd. Unit HP 7.5 Platen Size 360 mm x 510 mm Controls Maco 6 Photos available
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
We found 5 matching ads. Now displaying the remaining 5 ads.
FOR SALE: Year - 1996 Make - Skyjack Model - 3219
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6996 , Year = 1996 , Make = Skyjack , Model = 3219
Category:Forklifts / Lift Trucks (All Types)
Capacity: Model 3219 SkyJack Scissor Lift
Ad #6996
Year:
1996
Make:
Skyjack
Model:
3219
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
North Carolina
Country:
USA
Price:
$sold USD
General Description
Model 3219 SkyJack Scissor Lift: Model Year 1996 Platform Height 19'-0" Working Height 25'-0" Stowed Height 79" Overall Width 32.5" Overall Length 68" Platform Size 27.5" x 64" Roll Out Deck 3'-0" Non- Marking Tires New Batteries Less than 2 years old. New Control Arm. New spare Control Arm Never Used.
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Platform with controls Hydraulic boom Hydraulic front wheel steering Rear wheel drive (6) Group GC2H6V 220AH batteries Type 9-14-5LT Highliner front and rear tires
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7318 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7286 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7284 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7285 when Inquiring
Asking Price: $Sold
Buyers Premium:A 15 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6718 when Inquiring
Asking Price: $sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6716 when Inquiring
Asking Price: $Sold
Buyers Premium:A 7 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6717 when Inquiring
Asking Price: $sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Number of doors 2 Nominal cabinet depth 48" Nominal cabinet width 48" Door opening depth (ID) 41" Door opeining height (ID) 32" Height from turntable to top of door opening 25" Exterior height 75" Height from enclosure floor to glove-entry midpoint 10" Height from cabinet base to enclosure floor 34" Cabinet depth (exterior) 48" Cabinet width (exterior) 48" Dust Collector Specifications:
Dimensions 48" L-R x 41" F-B x 123" high Ventillation rate 600 C.F.M.
EQUIPPED WITH:
#CDC-6 Pro-Finish cartridge-type dust collector S/N 20625 with 1.5 H.P. 1/60/115-230 volt motor and sound attenuator & photohelic package Reclaimer 24" Diameter manual turntable with dolly and track (1,000 Lb. load capacity) Spray nozzle
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7294 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 7283 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 2005 Make - Blast-It-All Model - M44-4
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7187 , Year = 2005 , Make = Blast-It-All , Model = M44-4
Category:Bead & Shot Blasters
Capacity: Blast Cabinet
Ad #7187
Year:
2005
Make:
Blast-It-All
Model:
M44-4
Condition:
Very Good
Serial #:
On Request
Machine Status:
Under Power
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
North Carolina
Country:
USA
Price:
$Sold USD
General Description
400CFM 1/2HP Motor Dust Collector 1-Side Doors 31-1/2" x 33-5/8" 1 Fill Door Safety Foot Control Glove Arm Holes Viewing Window 12" x 20" 2 Tube 24" Flourescent Light
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6823 when Inquiring
Asking Price: $Sold
Buyers Premium:A 12 % Buyers Premium applies to the final sale price of this item
FOR SALE: Year - 2002 Make - Shoda Model - Essetre Leonardo
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6817 , Year = 2002 , Make = Shoda , Model = Essetre Leonardo
Category:Routers
Capacity: 2002 Shoda Essetre Leonardo
Ad #6817
Year:
2002
Make:
Shoda
Model:
Essetre Leonardo
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
2002 Shoda Essetre Leonardo
(4) Axis Cnc Router Working Center 60" x 120" Bed Single Spindle 18 hp @ 14,000 rpm Tool Tool Changer Compressor Dust collector Pod & Rail System Hand Held Controls COMPLETE SYSTEM
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1981 Make - TIMESAVER Model - 5521HPL
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 6715 , Year = 1981 , Make = TIMESAVER , Model = 5521HPL
Category:Sanders
Capacity:
Ad #6715
Year:
1981
Make:
TIMESAVER
Model:
5521HPL
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
15,000 lbs.
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Delaware
Country:
USA
Price:
$sold USD
Buyers Premium: A 7 % Buyers Premium applies to the final sale price of this item
General Description
55” TIMESAVER High Powered Single Drum Sander, Model 5521HPL
Width of belt 55” Diameter of steel drum 11 ½” Belt speed 7300 SFPM Variable speed range of billing roll 20-60 FPM
EQUIPPED WITH:
Single steel drum design Variable speed billing roll feed Automatic pneumatic belt traking Trabon automatic lub. system Motor load meter In-feed and out-feed pinch rolls Free standing control cabinet Extra sanding belts 5 H.P. Billing roll drive 150 H.P. 3/60/460 Volt drive with braking
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6715 when Inquiring
Asking Price: $sold
Buyers Premium:A 7 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6703 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7482 , Year = 2000 , Make = Thermwood , Model = 40
Category:Routers
Capacity: 2000 Thermwood 40 3 Axis CNC Router
Ad #7482
Year:
2000
Make:
Thermwood
Model:
40
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
(3) Axis 60" x 60" Single Table 10.5" Z Travel 91000 Super Controller Approx 2000 Hours
Full Machine Specifications
Number Of Axis 3 Number Of Tables Single Table Size 60" x 60" Spindle Horsepower 10 Brushless AC Servo Drive Feed Rate of 1500 Feed Rate Override Feed Hold "Z" - Axis Travel 10.5" Controls 91000 Supercontroller 6.4 Gigabyte Hardrive EIA 274D Programming Includes Automatic Tool Length Sensing Hand Held Programmer Unit is Set Up for Vacuum THE MACHINE HAS APPROXIMATE 2000 HOURS
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7474 , Year = 2005 , Make = Liberty , Model =
Category:Routers
Capacity: 2005 Liberty CNC Routers 3 Axis
Ad #7474
Year:
2005
Make:
Liberty
Model:
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
2005 Liberty CNC Router Table Size 24" x 42" Single Table Number of Spindles 1 Equipped with Vexta Control
Full Machine Specifications
3 Axis CNC Router For Small Parts # Of Axis 3 Table Size 24" x 42" Single Table Table Hold Down(s) "T" Slots Number Of Spindles 1 Z - Axis Travel 1" Horsepower .05 Controls Vexta Includes Engraver Head
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7478 , Year = 1981 , Make = PDA , Model = P/C 50
Category:Routers
Capacity: 1981 PDA P/C 50 3 Axis CNC Router
Ad #7478
Year:
1981
Make:
PDA
Model:
P/C 50
Condition:
Excellent
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$Sold USD
General Description
(3) Aixs Router 21.13" x 24.13" Table Size 2.0" Z Axis Travel Vacuum Table Quick Change (2) HP Tool Holders Turbo Cam Control
Full Machine Specifications
Number Of Axis 3 Table Size 22" x 24" Table has Patented vacuum scavenge/brush hold-down system. (does not include vacuum pump) Y- Axis Travel 24.13" X - Axis Travel 21.13" Z - Axis Travel 2.0" Number Of spindles Single Horsepower 2 @ 24,000 rpm Max Spindle Speed 400 IPM Quick Change Tool Holders for 1/8" shank tools, 3/8-Collet Capacity Phenolic Tooling Plate Cutter Radius Compensation Nested Subroutines for step and repeat functions Tooling and programming macros for test coupon- fabrication 1.2 MB, 3.5" micro floppy disc Menu Driven or EIA RS-274-D programming Controls TurboCam Electrics 230/460 vac, 20/10 amps MACHINE HAS BEEN RURFURBISHED AND HAS - "0" HOURS OF USE
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Year - 1998 Make - Techno Model - HX33VBM4896010
Mouseover Thumbnail to Enlarge
FOR SALE: Ad # 7480 , Year = 1998 , Make = Techno , Model = HX33VBM4896010
Category:Routers
Capacity: 1998 Techno Model HX33VBM4896010 3 Axis CNC Router
Ad #7480
Year:
1998
Make:
Techno
Model:
HX33VBM4896010
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$sold USD
General Description
Full Machine Specifications
# Of Axis 3 Table 48" x 96" # Of Spindles Single Horsepower 5 Motor Make Colombo (includes an extra 3 axis 5.5 hp Perske motor) X-Axis Travel 96" Y-Axis Travel 60" Z-Axis Travel 18.7" Controls Computer Base Controls
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
(2000) Northwood Model NW-265MC1D1 Dual 6' x 5' Table (3) Axis Tool Holder 14.0" Z-Axis 17.4 HP GE Fanuc Controls
Full Machine Specifications
"UNDER A 1000 HOURS OF USE!" Number Of Axis 3 Number Of Tables 2 Table Size 72" x 60" Axes Travel/Speed X - Axis: 200.00" Rapid Traverse Rate 0 to 2500" / Min. Y - Axis: 68.0" Rapid Traverse Rate 0 to 2500" / Min. V - Axis: 68.0" Rapid Traverse Rate 0 to 2500" / Min. Z - Axis: 14.0" Rapid Traverse Rate 0 to 500" / Min. Cutting Feed Rate X - Axis 1200" / Min Y - Axis 1200" / Min V - Axis 1200" / Min Z - Axis 500" / Min C-Axis 360 Degrees Distance Between Tables 2" Main Shank Size 1" Maximum Collets (4) 1/4" ER-40 (4) 1/2" ER-40 (4) 3/4" ER-40 Tool Holders (12) HSK-63F Collet Chuck (RH) Tooling Length (extended from tool holder) 4" Maximum Cutter Diameter 4.5" Main Spindle Power 17.4 HP (13 kw) Spindle Speed 3600 - 18000 rpm Shank Size (Boring Unit) 10 mm (10H7) Boring Unit Power 2.5 hp Boring Unit Speed 4000 rpm Controls GE/Fanuc 160i-MA Controls Includes Advanced Preview Control (APC) MPG Handle, RS-232C/PCMCIA interfaces, 32k memory (4 wire grounded) SUPER CLEAN
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
FOR SALE: Ad # 7345 , Year = 1995 , Make = Multicam , Model = 48
Category:Routers
Capacity: 1995 Multicam 48 CNC Router
Ad #7345
Year:
1995
Make:
Multicam
Model:
48
Condition:
Very Good
Serial #:
On Request
Machine Status:
In Storage
Shipping Info:
We can load
Weight:
Dimension: L x W x H
Machine Location:
City:
On Request
State:
Country:
USA
Price:
$SOLD USD
General Description
Spindle 48" x 96" Table T-Lock Hold Downs 5 HP Perske Motor PLC/Software Vacuum System (2) Xtra Perske Heads
Full Machine Specifications
Number Of Axis 3 Number Of Tables 1 Table Size 48" x 96" Table Hold Down "T" Lock Material Hold down Number Of Spindles Single Spindle Motor Perske 5 HP Spindle Drive Stepper Motor Accuracy (max speed) +/- .002/ft 4" second Maximum Weight 800 lbs. Controls PLC Software includes CASmate scan / 3-D Import / Export clean up In/outline / router offsets. Hatch and island fill for engraving. Full Scanning and line conversion capabilities with 3-D machine tool path generation for interactive "z" control on the fly Includes (2) Extra Perske Motor Heads 1.5 HP Vacuum Pump for product hold down Computer / Software Monitor, HP Scanjet 3P & Printer
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Disclaimer:
Subject to prior sale & verification by buyer.Specifications herein are assumed correct but are not binding in detail.We encourage your personal or video taped inspection prior to sale of this machine to confirm accuracy of ad. See Standard Terms And Conditions
Warranty: Machine sold "As is, Where is " buyer inspection encouraged
To Inquire about this machine contact: NetMachinery 704 904-9123 Or Click Request more information
Refer to Ad # 6703 when Inquiring
Asking Price: $Sold
Buyers Premium:A 10 % Buyers Premium applies to the final sale price of this item