|
User SearchYour search results (if any) appear below in groups of 75 for each section.
Manual Lathes
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1990'S? Make - Hardinge Model - DV-59/DSM-59 |
|---|
| FOR SALE: Ad # 9937 , Year = 1990'S? , Make = Hardinge , Model = DV-59/DSM-59 | 
|
|
Category: Second Operation
|
Capacity: Hardinge DV-59 Second op turret Lathe 9" swing x 18" centers
|
| Ad #
9937 |
| Year:
| 1990'S?
|
| Make:
| Hardinge
|
| Model:
| DV-59/DSM-59
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 1100
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- collet closer system
6" 3 jaw chuck
coolant sys.
Indexer unit
Lots of holders & Tooling included !!!
Std Specs below-please verify
SPECIFICATIONS:
SPINDLE CAP. w/ROUND 5C COLLETS ...... 1-1/16"
HEXAGON 5C COLLETS .... 7/8"
SQUARE 5C COLLETS ..... 3/4"
STEP CHUCKS ........... 1-1/16" TO 6"
JAW CHUCKS ............ 5"
JAW CHUCKS THROUGH SPINDLE 1-5/32"
SPINDLE TAPER ........................ HARDINGE
SWING OVER BED ....................... 9"
DISTANCE BETWEEN CENTERS ............. 17"
TRAVEL OF TOP SLIDE .................. 4-1/4"
TRAVEL OF BOTTOM SLIDE ............... 5"
TRAVEL OF TAILSTOCK SPINDLE .......... 3-1/2"
TAILSTOCK SPINDLE TAPER .............. #3MT
VARIABLE SPINDLE SPEED RANGE ......... 230 TO 3500 RPM
APPROX. WEIGHT ....................... 1,150 LBS.
-PUSH BUTTON CONTROL FOR VARIABLE SPEED
-BALL BEARING LEVER TYPE 5C COLLET CLOSER
-ASSORTED 5C COLLETS (SEE PHOTOS)
-3/60/230 VOLT TWO-SPEED DRIVE MOTOR & ELECTRICAL CONTROLS
|
| Electrical Description |
|
|
| Comments: |
- This is the nicest one ive ever seen & most complete with acc. !!!!!!!!!!!! New sold for over 30K without Accossories
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 95 ? Make - Darex Model - E-90 |
|---|
| FOR SALE: Ad # 9946 , Year = 95 ? , Make = Darex , Model = E-90 |
|
|
Category: Drill / Thread Parts & Accessories
|
Capacity: End Mill sharpner
|
| Ad #
9946 |
| Year:
| 95 ?
|
| Make:
| Darex
|
| Model:
| E-90
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: | 150
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- E-90 End Mill Sharpener comes complete,
including these standard items:
• Set of 6 Ultra precision collets (3/16, 3/8, 1/2, 5/8, 3/4 and 1")
• CBN (Borazon) grinding wheel
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 95 Make - National Model - U6-4812 |
|---|
| FOR SALE: Ad # 9939 , Year = 95 , Make = National , Model = U6-4812 |
|
|
Category: Finger Brakes-Box & Pan Brakes
|
Capacity: 4 ft x 12 GA Heavy Duty
|
| Ad #
9939 |
| Year:
| 95
|
| Make:
| National
|
| Model:
| U6-4812
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 1900
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- NATIONAL BRAKE
New National Heavy Duty Box and Pan Brake
Model U6-4812
48" cap
12 Ga
have all fingers-some not shown
Specifications
Bending capacity: 12 gauge (Mild Steel)
Nominal bending length: 48"
Finger widths: 3", 4", 5", 6"
Shipping weight: 1,900 lbs.
Standard Equipment and Features
¨ Heavy duty steel frame construction
¨ Extra heavy tie rods for minmum deflection
¨ Stop rods for repeat bends
¨ Two large counter weights
¨ Precision bearings on the apron
|
| Comments: |
- Very nice unit, nose bar of fingers are perfect !
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 90's Make - Jet Model - SR20-24/752020 |
|---|
| FOR SALE: Ad # 9938 , Year = 90's , Make = Jet , Model = SR20-24/752020 |
|
|
Category: Slip Rolls (Manual & Mechanicaly Operated)
|
Capacity: 20 Ga x 24" slip roll W/ stand
|
| Ad #
9938 |
| Year:
| 90's
|
| Make:
| Jet
|
| Model:
| SR20-24/752020
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 400
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 20 Ga cap
24" length
includes Stand # SRS-24 # 753024
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 95 Make - DI-ACRO Model - 2HN |
|---|
| FOR SALE: Ad # 9944 , Year = 95 , Make = DI-ACRO , Model = 2HN |
|
|
Category: Notching / Nibbler Machines
|
Capacity: 6 x 6 blades-corner notcher
|
| Ad #
9944 |
| Year:
| 95
|
| Make:
| DI-ACRO
|
| Model:
| 2HN
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: | 300
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 6 x 6 Blades
inlaid scales
stand
|
| Comments: |
|
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 95 ? Make - DI-ACRO Model - # 2 |
|---|
| FOR SALE: Ad # 9945 , Year = 95 ? , Make = DI-ACRO , Model = # 2 |
|
|
Category: Manual: Hole / Turret Punches
|
Capacity: 2 Ton Punch - 1.5" Dia hole in 16Ga steel
|
| Ad #
9945 |
| Year:
| 95 ?
|
| Make:
| DI-ACRO
|
| Model:
| # 2
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: | 250
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- This single station machine punches holes of various shapes and sizes up to 1.5" in 16 gauge mild steel. Adjustable side and back gauges allow precision gauging for exact duplication.
Standard Equipment
Stripper
Punch holder for punches with .5" diameter shank
Style "C" die holder with "B" adapter
Side and back gauges
Optional Equipment
Stand - Heavy duty construction featuring 3/16" steel inlcuding the work shelf. 33" tall, 28" wide and 15" deep.
A,B,C,D or E die holders and adapters
Model Model 2
Max. Punch Capacity 1.5 (38) dia. In 16 ga. (1.5) mild steel
Max. Punch Size 4 (101.6)
Tonnage 4 (3.6)
Throat Depth 12 (302.8)
Throat Height 3 (76)
Stroke of Ram .625 (15.9)
Dia. Hole in Ram 1 (25.4)
Machine Shipping Weight 350 lbs / 159 kg
Stand]Shipping Weight 95lbs / 43 kg
Space Requirements WxDxH Incl. Optional floor stand 16 x 32 x 75
406 x 813 x 1905)
Punch No. 2 – Made to a maximum of ½” round or a shape within the perimeter of ½”diameter
This tooling is designed for use in Di-Acro No. 1 and No. 2 single station punch presses.
Twin Shear – All punches requiring more than 4 tons to punch 16 ga. mild steel (13/16” round or equivalent irregular size) are ground with twin shear. Twin shear reduces necessary power about 50%. Punches 13/16” or larger are also available without twin shear.
Center Point – All single station punches from 1/8” and up are provided with a centering point. This feature is best suited for accurate layout work or for hole location. Additional charge to remove center point.
Clearance – Single station punches and dies are provided with a standard clearance of 007”- .008” (15% of 16 ga. material). Smaller clearance can be provided at an additional cost.
Blanking Dies – In operations where the slug must be retained, we can furnish the punch and die set to your specifications. For blanking the punch is ground flat.
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1995 Make - Sunnen Model - HBP10/K |
|---|
| FOR SALE: Ad # 9943 , Year = 1995 , Make = Sunnen , Model = HBP10/K |
|
|
Category: Hydraulic H-Frame Press
|
Capacity: 10 Ton Hyd.
|
| Ad #
9943 |
| Year:
| 1995
|
| Make:
| Sunnen
|
| Model:
| HBP10/K
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 200
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 10 Ton
Hyd. Actuated
Foot pedal control
12" stroke
12" wide housing
6" deep housing
|
| Electrical Description |
|
|
| Comments: |
|
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - ? Make - J&L Model - Classic 14T |
|---|
| FOR SALE: Ad # 15848 , Year = ? , Make = J&L , Model = Classic 14T |
|
|
Category: Comparators
|
Capacity: 14"
|
| Ad #
15848 |
| Year:
| ?
|
| Make:
| J&L
|
| Model:
| Classic 14T
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: | 300
|
| Dimension: L x W x H | 4 x 4 x 6 |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- J&L classic 14T optical comparator
14" screen
includes Metronics Quadra-chek unit#2000
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 80's ? Make - Brown & Sharp Model - 7-101 |
|---|
| FOR SALE: Ad # 9947 , Year = 80's ? , Make = Brown & Sharp , Model = 7-101 |
|
|
Category: Coordinate Measuring Machine, (CMM)
|
Capacity: 27 x 24 x 18
|
| Ad #
9947 |
| Year:
| 80's ?
|
| Make:
| Brown & Sharp
|
| Model:
| 7-101
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: | 3000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold sold sold USD
|
|
Buyers Premium:
A % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- software -Val measure 16
renishaw optical probe
repeatability+_ 0.0002"
Resolution: +_ 0.00008
Accuracy: +_: 0.0002"
manuals
computer
complete system
|
| Electrical Description |
|
|
| Comments: |
|
|
|
|
|
| Buyers Premium:
A % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1986 Make - Thermotron Model - S-16 |
|---|
| FOR SALE: Ad # 9941 , Year = 1986 , Make = Thermotron , Model = S-16 |
|
|
Category: Chillers / Freezers
|
Capacity: Thermotron-Environmental chamber
|
| Ad #
9941 |
| Year:
| 1986
|
| Make:
| Thermotron
|
| Model:
| S-16
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: | 2000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Climate chamber-Environmental Test Chambers
Temperature and Temperature/Humidity test chambers provide superior performance over a wide range of applications. From prototypng to durability to product component screening tests, the S/SM-Series has been designed to meet quality standards while still offering flexibility, uniformity and control accuracy for cost-effective testing.
16 cubic feet
SiZe: 30 x 30" x 30 Deep
programmable controller
Heats & cools: -94 Deg F to 356 deg F
-70 to 180 Deg C
change tate 3 deg C/min
S/SM-Series Test Chambers are able to perform both high and low temperature tests. Many of these chambers have a temperature range of -70 to +180°C (-94 to +356°F). Hermetically sealed compressors provide moderate temperature change rates while allowing the chamber to consume less power than comparable chambers. Temperature/Humidity models are equipped with a reliable, accurate and efficient full range humidity system capable of simulating conditions from 10 to 98% RH.
Thermotron's S/SM-Series Temperature and Temperature/Humidity test chambers provide superior performance over a wide range of applications. From prototypng to durability to product component screening tests, the S/SM-Series has been designed to meet quality standards while still offering flexibility, uniformity and control accuracy for cost-effective testing.
|
| Electrical Description |
|
|
| Comments: |
|
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - Make - ?? Model - 30 x 24 |
|---|
| FOR SALE: Ad # 9940 , Year = , Make = ?? , Model = 30 x 24 |
|
|
Category: Bead & Shot Blasters
|
Capacity: 24"Deep x 30" wide
|
| Ad #
9940 |
| Year:
|
|
| Make:
| ??
|
| Model:
| 30 x 24
|
| Condition:
|
|
| Serial #:
| On Request
|
|
| Machine Status: |
|
| Shipping Info: | We can load
|
| Weight: | 200
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 30" wide
24" deep
opens @ top
light
|
| Electrical Description |
|
|
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
