User SearchYour search results (if any) appear below in groups of 75 for each section.
Manual Lathes
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9937 | Second Operation |
1990'S? |
Hardinge |
DV-59/DSM-59 |
Excellent |
sold |
Photo /
More Info. |
Hardinge DV-59 Second op turret Lathe 9" swing x 18" centers: collet closer system
6" 3 jaw chuck
coolant sys.
Indexer unit
Lots of holders & Tooling included !!!
Std Specs below-please verify
SPECIFICATIONS:
SPINDLE CAP. w/ROUND 5C COLLETS ...... 1-1/16"
HEXAGON 5C COLLETS .... 7/8"
SQUARE 5C COLLETS ..... 3/4"
STEP CHUCKS ........... 1-1/16" TO 6"
JAW CHUCKS ............ 5"
JAW CHUCKS THROUGH SPINDLE 1-5/32"
SPINDLE TAPER ........................ HARDINGE
SWING OVER BED ....................... 9"
DISTANCE BETWEEN CENTERS ............. 17"
TRAVEL OF TOP SLIDE .................. 4-1/4"
TRAVEL OF BOTTOM SLIDE ............... 5"
TRAVEL OF TAILSTOCK SPINDLE .......... 3-1/2"
TAILSTOCK SPINDLE TAPER .............. #3MT
VARIABLE SPINDLE SPEED RANGE ......... 230 TO 3500 RPM
APPROX. WEIGHT ....................... 1,150 LBS.
-PUSH BUTTON CONTROL FOR VARIABLE SPEED
-BALL BEARING LEVER TYPE 5C COLLET CLOSER
-ASSORTED 5C COLLETS (SEE PHOTOS)
-3/60/230 VOLT TWO-SPEED DRIVE MOTOR & ELECTRICAL CONTROLS
|
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9946 | Drill / Thread Parts & Accessories |
95 ? |
Darex |
E-90 |
Excellent |
sold |
Photo /
More Info. |
End Mill sharpner: E-90 End Mill Sharpener comes complete,
including these standard items:
• Set of 6 Ultra precision collets (3/16, 3/8, 1/2, 5/8, 3/4 and 1")
• CBN (Borazon) grinding wheel
|
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9939 | Finger Brakes-Box & Pan Brakes |
95 |
National |
U6-4812 |
Excellent |
sold |
Photo /
More Info. |
4 ft x 12 GA Heavy Duty: NATIONAL BRAKE
New National Heavy Duty Box and Pan Brake
Model U6-4812
48" cap
12 Ga
have all fingers-some not shown
Specifications
Bending capacity: 12 gauge (Mild Steel)
Nominal bending length: 48"
Finger widths: 3", 4", 5", 6"
Shipping weight: 1,900 lbs.
Standard Equipment and Features
¨ Heavy duty steel frame construction
¨ Extra heavy tie rods for minmum deflection
¨ Stop rods for repeat bends
¨ Two large counter weights
¨ Precision bearings on the apron
|
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9938 | Slip Rolls (Manual & Mechanicaly Operated) |
90's |
Jet |
SR20-24/752020 |
Excellent |
sold |
Photo /
More Info. |
20 Ga x 24" slip roll W/ stand: 20 Ga cap
24" length
includes Stand # SRS-24 # 753024 |
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9944 | Notching / Nibbler Machines |
95 |
DI-ACRO |
2HN |
Excellent |
sold |
Photo /
More Info. |
6 x 6 blades-corner notcher: 6 x 6 Blades
inlaid scales
stand |
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9945 | Manual: Hole / Turret Punches |
95 ? |
DI-ACRO |
# 2 |
Excellent |
SOLD |
Photo /
More Info. |
2 Ton Punch - 1.5" Dia hole in 16Ga steel: This single station machine punches holes of various shapes and sizes up to... |
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9943 | Hydraulic H-Frame Press |
1995 |
Sunnen |
HBP10/K |
Excellent |
sold |
Photo /
More Info. |
10 Ton Hyd. : 10 Ton
Hyd. Actuated
Foot pedal control
12" stroke
12" wide housing
6" deep housing |
|
We found 2 matching ads. Now displaying the remaining 2 ads.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 15848 | Comparators |
? |
J&L |
Classic 14T |
Good |
sold |
Photo /
More Info. |
14": J&L classic 14T optical comparator
14" screen
includes Metronics Quadra-chek unit#2000 |
|
Ad # 9947 | Coordinate Measuring Machine, (CMM) |
80's ? |
Brown & Sharp |
7-101 |
Good |
sold sold sold |
Photo /
More Info. |
27 x 24 x 18 : software -Val measure 16
renishaw optical probe
repeatability+_ 0.0002"
Resolution: +_ 0.00008
Accuracy: +_: 0.0002"
manuals
computer
complete system |
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9941 | Chillers / Freezers |
1986 |
Thermotron |
S-16 |
Excellent |
Sold |
Photo /
More Info. |
Thermotron-Environmental chamber: Climate chamber-Environmental Test Chambers
Temperature and Temperature/Humidity test chambers provide superior performance over a wide range of applications. From prototypng to durability to product component screening tests, the S/SM-Series has been designed to meet quality standards while still offering flexibility, uniformity and control accuracy for cost-effective testing.
16 cubic feet
SiZe: 30 x 30" x 30 Deep
programmable controller
Heats & cools: -94 Deg F to 356 deg F
-70 to 180 Deg C
change tate 3 deg C/min
S/SM-Series Test Chambers are able to perform both high and low temperature tests. Many of these chambers have a temperature range of -70 to +180°C (-94 to +356°F). Hermetically sealed compressors provide moderate temperature change rates while allowing the chamber to consume less power than comparable chambers. Temperature/Humidity models are equipped with a reliable, accurate and efficient full range humidity system capable of simulating conditions from 10 to 98% RH.
Thermotron's S/SM-Series Temperature and Temperature/Humidity test chambers provide superior performance over a wide range of applications. From prototypng to durability to product component screening tests, the S/SM-Series has been designed to meet quality standards while still offering flexibility, uniformity and control accuracy for cost-effective testing.
|
|
We found 1 matching ad. Now displaying the final ad.
Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9940 | Bead & Shot Blasters |
|
?? |
30 x 24 |
|
sold |
Photo /
More Info. |
24"Deep x 30" wide: 30" wide
24" deep
opens @ top
light
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|