|
User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 12 matching ads. Now displaying the remaining 12 ads.
| FOR SALE: Year - 1981 Make - Ikegai Model - FX25N Chucker(no tailstock) |
|---|
| FOR SALE: Ad # 4326 , Year = 1981 , Make = Ikegai , Model = FX25N Chucker(no tailstock) | 
|
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: 10" Ikegai Chucker
|
| Ad #
4326 |
| Year:
| 1981
|
| Make:
| Ikegai
|
| Model:
| FX25N Chucker(no tailstock)
|
| Condition:
| Fair
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Fanuc 6TB Control
10" Kitagawa Power chuck with thru hole
Approximate specifications:
2.5" Spindle hole
HP 15
Coolant
2000 RPM
|
| Comments: |
- Only problem - needs a new fan motor for main motor - otherwise runs good.
More photographs on request
|
|
|
| FOR SALE: Year - 1983 Make - Hardinge Model - Super Slant SB-GN |
|---|
| FOR SALE: Ad # 1496 , Year = 1983 , Make = Hardinge , Model = Super Slant SB-GN |
|
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: Hardinge Twin Turret 6" Lathe
|
| Ad #
1496 |
| Year:
| 1983
|
| Make:
| Hardinge
|
| Model:
| Super Slant SB-GN
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Georgia
|
Country:
|
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- twin 8 Station Turrets (4-axis for speed)
6" chucker
Swing Over Bed 22"
DBC 30"
Spindle 15 hp
Control Fanuc/GE GN 6TC
RS232
Twin turret machine..
INCLUDES:
Full Documentation
6" 3-Jaw chuck
Collet Chuck that accepts either 16C or 5C collets
Misc collets
Actuator for above chucks
Chip Conveyor
Hardinge Bar Feeder
|
| Electrical Description |
|
|
| Comments: |
- Recently lost parameters and they need to be re-loaded (customer has disc)
peramiters need reloaded and battery replaced
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 77-78 Make - Hardinge Model - AHC |
|---|
| FOR SALE: Ad # 7941 , Year = 77-78 , Make = Hardinge , Model = AHC |
|
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: Hardinge AHC Automatic Precision Chucker
|
| Ad #
7941 |
| Year:
| 77-78
|
| Make:
| Hardinge
|
| Model:
| AHC
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 3000
|
| Dimension: L x W x H | 6' x 4'x 6' |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- 1-1/16" bar capacity
14" swing over ways, 6" over cross slide
12' bar feed
6 position turret
cut-off attachment
Automatic threading attachment
Taper Attachment
Parts Discharge slide
roll-around console control
Hardened and Ground Dovetailed Bed
Coolant system
|
| Electrical Description |
|
|
| Comments: |
- NOTE!! A second, older but almost identical machine (as seen in ad #7942)is included in the price. This other machine was also running before being removed from service
A large amount of misc tooling included, tools, tool holders, etc
can rent fork truck for 300.00 to load
All original manuals
Collets show NOT included
CAN BE SEEN UNDER POWER AT ANYTIME
More photos on request
Rigging costs are about $350.00
|
|
|
| FOR SALE: Year - 1966 Make - Hardinge Model - AHC |
|---|
| FOR SALE: Ad # 7942 , Year = 1966 , Make = Hardinge , Model = AHC |
|
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: Hardinge AHC Automatic Precision Chucker
|
| Ad #
7942 |
| Year:
| 1966
|
| Make:
| Hardinge
|
| Model:
| AHC
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | Requires rigger
|
| Weight: | 4000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- 1-1/16" bar capacity
14" swing over ways, 6" over cross slide
6 position turret
cut-off attachment
Automatic threading attachment
Parts Discharge slide
roll-around console control
Hardened and Ground Dovetailed Bed
Coolant system
|
| Electrical Description |
|
|
| Comments: |
- NOTE!! A second, newer but almost identical machine (as seen in ad # 7941) is included in the price. This other machine is still in production
A large amount of misc tooling included, tools, tool holders, etc
All original manuals
Collets show NOT included
This machine was running perfectly prior to being removed from service
Rigging costs are about $350.00 for both machines
|
|
|
| FOR SALE: Year - 1996 Make - Nakamura Model - TMC-20II |
|---|
| FOR SALE: Ad # 6752 , Year = 1996 , Make = Nakamura , Model = TMC-20II |
|
|
Category: CNC Lathe w/sub Spindle or Live Tooling
|
Capacity: 16" x 18" 2-Axis Nakamura Turning Center with Live Tooling and Barfeed
|
| Ad #
6752 |
| Year:
| 1996
|
| Make:
| Nakamura
|
| Model:
| TMC-20II
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | Requires rigger
|
| Weight: | 5,940 lbs (machine only)
|
| Dimension: L x W x H | 79"L x 57" W x 63"H |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Control: Fanuc 18-T
Swing Over Bed: 15.75"
Swing Over Carriage: 11.02"
Distance Between Centers: 18.07"
Max. Turning Diameter: 8.66" (when using Live Tools)
Max. Turning Length: 8.26"
Max. Bar Size: 2" diameter
Chuck Size: Standard 8" (This machine fitted with 16-C Collet Chuck)
Axes Travel, X-Axis, 6.39"
Axes Travel, Z-Axis, 13.38"
Spindle Speed Range: 50 - 4,500 rpm (Stepless)
Spindle Nose: A2-5
Spindle Bore: 2.44"
Spindle Power: 15/10 hp or 11/7.5 kW
C-Axis: 7.5 degrees - programmable
Turret Positions: 10
Turret Index Time: 0.2 sec (station-to-station)
Live Tooling Speed Range: 30 - 3,500 rpm (stepless)
No. Of Driven Tool Positions; 10
Rapid Traverse Feed Rates:
X: 629 ipm
Z: 945 ipm
No sub spindle on this machine
|
| Electrical Description |
|
|
| Comments: |
- Includes:
12' Spego Bar Feeder
16-C Collet Chuck and some collets
3 x Cross (90 deg) Driven Tool Attachments
1 x Face Driven Tool Attachment
RS-232 Interface
Spindle Load Meter
Full Documentation
|
|
|
| FOR SALE: Year - 2006/07 Make - HURCO Model - TM6 |
|---|
| FOR SALE: Ad # 8878 , Year = 2006/07 , Make = HURCO , Model = TM6 |
|
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: 10in swing x 12.8 in cut length
|
| Ad #
8878 |
| Year:
| 2006/07
|
| Make:
| HURCO
|
| Model:
| TM6
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | Requires rigger
|
| Weight: | 5,732 lbs
|
| Dimension: L x W x H | 86.6” x 86.5” x83.5” |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Capacity:TM6
6" chuck A2-5
X-axis Travel7”
Z-axis Travel14”
Distance Between Centers15.8"
Swing Over Bed 15.94”
Swing Over Cross Slide9.45”
Maximum Turning Diameter12.4”
Maximum Turning Length13.4”
Spindle:
Spindle NoseA2-5
Spindle Speed (RPM)6,000 rpm
Spindle Motor Horsepower (1 min.)17.5
Spindle Motor Torque (1 min.)81.5 ft-lbs @ 1125 rpm
Spindle Chuck6” Diameter
Spindle Bore Diameter2.2”
Maximum Bar Capacity1.77”
Motion:
X-axis Rapid Feed Rate750 ipm
Z-axis Rapid Feed Rate945 ipm
Least Command Increment0.0001”
Positioning Accuracy-/+ 0.0002”
Repeatability-/+ 0.0001”
Hydraulic Tool Turret:
Number of Stations12
RotationBi-Directional
Turret Index Time (Adjacent).5 Seconds
Turret Index Time (Furthest location)1.5 Seconds
OD vs. ID toolsAny Combination
Tool Shank Width.75” x .75”
Maximum Boring Bar Diameter1.25”
Power Rating16.25 KVA
Standard Machine Features:
Powerful 15 HP Spindle Motors-6,000RPM
A2-5 Series Spindle Nose
Fast 750/945 ipm Rapid Traverse in X and Z
3-Jaw Chuck including Soft Jaws
Automatic Central Lubrication System
.5 Second Tool Index Time (Adjacent)
Large Work Cylinder
Wide Enclosure Door Openings
Shortest Path Tool Turret Indexing
Flood Coolant Assembly
Standard Control Features:
Conversational Turning Programming
12” Color LCD Monitor
NC (G-code) Programming
Wire Frame Graphics ( Conversational only)
40 GB Hard Drive
2 GB RAM Memory
USB 2.0 Port
Text Input Capabilities
2.8 GHz Pentium 4 Processor
UL/CSA Qualified Certifications
RS-232 Port
12 station turret
.5sec adjacent tool change time
travel:7in X, 14in Z center dist 13.5 in
swing over bed 16 in
swing over cross slide 10"
max turning dia 10" x 12.8 in max length
Single Screen WinMax® Control
The power of the WinMax Control, is the result of Hurco's three decades of customer-centered software experience combined with the proven platform of Microsoft Windows. Power packed with 25 new features and hundreds of enhancements to existing software features, our engineers designed WinMax to maximize efficiency, increase productivity, and improve surface finish. The WinMax control is equipped with two programming options so you can decide the best programming method for each job—Hurco's shop floor programming, called Hurco Conversational, or NC (M and G codes) part programming.
Conversational programming allows you to program a part at the machine by reading the print or program worksheet. As you program the part, prompts and questions appear on the screen. You respond by selecting machine operations or entering part dimensions. The software steps you through.
NC part programs can be created using the CNC software on the control or imported from an offline CAM System. With an enhanced NC interpreter, multi-line NC run time monitor with a G-Code modal display, and canned G-Code probing cycles, the NC side of the Max control is just as powerful as the Conversational programming method for which Hurco is known.
Standard Control Features:
Stop Cycle Button
Constant Surface Speed
Optional Stop
Auto Interrupt Cycle
Spindle Jog
Automatic Tool Home
Coolant Select
Distance to Go (Conversational & NC)
Turret Index Control (Auto/Manual)
Feed Hold Button
Power On Diagnostics
Feed-Rate Override 0-150%
Leadscrew Compensation
Rapid Override 0-100%
Backlash Compensation
RPM Override 0-200%
Program Manager Function
Single Cycle Mode
has tailstock
no chip conveyor or bar feeder
also includes Win Max classic pkg-touch screen, 3D graphics, disc drive
tailstock-manual position W/ programmable quill
6-3/4" insert tooling holders-3 roughing/turning, 2 threding, 1 finishing/profiling holder
|
| Electrical Description |
|
|
| Comments: |
- Very low hours approx:8 days run time
****Only 8 spindle days on machine (as of 5/4/09, see control pic.)
****Tooled up and ready to go.
Options:
Max Classic conversational control w/graphics simulation.
Specs.
12 Tools
3/4" tool shank
X travel 7.000"
Z travel 14.000"
X rapid 19 m/min.
Z rapid 24 m/min.
Maxb dia. cut 10.000"
Dis. between centers 15.866"
Max fed bar 1.650"
15 HP
6000 RPM
Rolling center.
Pretty much complete tooling package.
Many option and tooling-insert tools , profiling, threading,(2) er-32 collet holders.live center
Reason for selling: mill side very busy but lathe work dropped off.
Rigging/loading fee 900.00 on a truck
owner paid over 52,000 without tooling..
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1995? Make - OKUMA Model - LT 25-M |
|---|
| FOR SALE: Ad # 7711 , Year = 1995? , Make = OKUMA , Model = LT 25-M |
|
|
Category: CNC Lathe w/sub Spindle or Live Tooling
|
Capacity: OKUMA Twin Spindle, Live Tools CNC Lathe
|
| Ad #
7711 |
| Year:
| 1995?
|
| Make:
| OKUMA
|
| Model:
| LT 25-M
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | Requires rigger
|
| Weight: | 25,30 lbs
|
| Dimension: L x W x H | 186" x 84" x 92"H |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Control: OSP 5020-L
Number of controlled axes: 7
Swing over bed: 25.59"
Swing over saddle: 19.68"
Max. Distance of spindle noses: 57.08"
Max. turning diameter: 11.81
Headstock & Main Spindle
Spindle nose: L,R:JIS A2-8
Spindle diameter at front bearing L,R:4.72"
Bore diameter:
Left: 2.125"
Right: 3.15
Range of spindle speed: L,R:38 to 3,800 rpm
Number of spindle speeds: L,R:2
Cross-Slide (X-axis) & Carriage (Z-axis)
Cross-slides travelX-axes (XA and XB)10.42"
Longitudinal travel: Z-axes
ZA: 22.44"
ZB: 44.88" ZC: 22.44"
Servomotor: X-axes
XA5.3 hp XB5.3 hp
Z-axes ZA, ZB, ZC:5.3 hp
Rapid-traverse speed
X-axes787 ipm
Z-axes945 ipm
Cutting feedrate, X and Z 0.0001 thru 40.0000 IPR
Slide thrust: (Continuous)
X-axes: 1,223 lbs
Z-axes: 2,396 lbs
MACHINE SPECIFICATIONS
Turret (VDI)
Type and No. of tool stationsV12 + V12
Tool size: O.D.1" x 1"
I.D1.50"
Turret size (across flats)15.74"
Size of index coupling9.45"
Turret index time: 0.25 seconds (Station-Station)
Rotary Tool Spindle Speed100-3,000 RPM
Rotary Tool Speed Range1 • Infinitely Variable
Electric Motor
Main spindle drive motor: VAC 30 hp (20 min.)
M-Spindle MotorVAC 5 hp
Hydraulic oil pump motor5 hp
Coolant pump motor1/3 hp x 2
Tank Capacity
Hydraulic power unit20 gal.
Coolant tank106 gal
Lubrication tank 1.6 gal.
|
| Electrical Description |
|
|
| Comments: |
- Auto Door Actuation
C-X Contouring
C-Axis on Left hand spindle
Chip Conveyor
Tape Reader
ONE-TOUCH IGF
Tool Holders (no tools)
NOTE: As with a NEW machine, NO chucks are supplied with this machine
Can be offered with or without a Spego 12' bar feeder. Additional $11,000.00
More Photos on request
|
|
|
| FOR SALE: Year - 1998 Make - CNC Enhancements Model - Autobar 400 |
|---|
| FOR SALE: Ad # 5854 , Year = 1998 , Make = CNC Enhancements , Model = Autobar 400 |
|
|
Category: CNC Lathe Part & Accessories
|
Capacity: 0 - 4" Dia. Barfeeder for Haas and Other Types of Lathes
|
| Ad #
5854 |
| Year:
| 1998
|
| Make:
| CNC Enhancements
|
| Model:
| Autobar 400
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 1700Lbs
|
| Dimension: L x W x H | 6' x 8' x 5' |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- 0-4" Dia capacity. 5'Wide x 40" deep feeder
tray,with angle adj.part capacity.
Remote pendant
Quick connects ready to hook up to a Hass Lathe
HL-2 model purchased with originally.
Made in USA
|
| Electrical Description |
- Pneumatic w/ electrical contr interfac
|
| Comments: |
- Nice machine, looks like never used, can be interfaced
very easily with Haas lathes, but should be able to be
adapted to any brand.
|
|
|
|
| Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - Make - IEMCA Model - ERA/4037-F |
|---|
| FOR SALE: Ad # 5815 , Year = , Make = IEMCA , Model = ERA/4037-F |
|
|
Category: CNC Lathe Part & Accessories
|
Capacity: 14' IEMCA ERA/4037-F Barfeeders
|
| Ad #
5815 |
| Year:
|
|
| Make:
| IEMCA
|
| Model:
| ERA/4037-F
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
|
|
| FOR SALE: Year - 1996 Make - Mori Seiki Model - CL-20 B |
|---|
| FOR SALE: Ad # 7240 , Year = 1996 , Make = Mori Seiki , Model = CL-20 B |
|
|
Category: Turning Center 11 in. & over chuck
|
Capacity: 18" x 15" Mori CNC Turning Center
|
| Ad #
7240 |
| Year:
| 1996
|
| Make:
| Mori Seiki
|
| Model:
| CL-20 B
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: | 4,500 lbs
|
| Dimension: L x W x H | 94.2" x 91.93" x 63 H |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Control: Fanuc/Mori MF-T8
Swing Over Bed: 18.5"
Swing Over Slide: 14.96"
Max Turning Diameter: 12.20"
Standard Turning Length: 5.91"
Maximum Turning Length: 12.99"
Bar Capacity: 2.55"
Travels:
X Travel: 7.48"
Z Travel: 14.57"
Rapid Travels:
X Axis: 590 ipm
Z Axis: 787 ipm
Feed/rev:
X Axis: 0 - 19.69"/rev
Z Axis: ) - 19.69"/min
Spindle Speeds: 35 - 3,500 rpm (Infinitely variable)
Spindle Power: 10/7.5 hp
Spindle Through Bore: 2.87" diameter
Spindle - Inner Bearing Diameter: 4.33" diameter
Turret: 8 Station
Square Tool Holder: 1" sq.
Round Tooling: 2" diameter
|
| Electrical Description |
|
|
| Comments: |
- Complete documentation supplied
|
|
|
| FOR SALE: Year - Rebuilt Make - BULLARD Model - Cutmaster 56 in |
|---|
| FOR SALE: Ad # 8195 , Year = Rebuilt , Make = BULLARD , Model = Cutmaster 56 in |
|
|
Category: Vertical Turret Lathe (VTL)
|
Capacity: 56" Bullard VTL , With ATC, TOTALLY RE-MANUFACTURED
|
| Ad #
8195 |
| Year:
| Rebuilt
|
| Make:
| BULLARD
|
| Model:
| Cutmaster 56 in
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Other
|
| Shipping Info: | We can load
|
| Weight: | 76,450 lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
|
Country:
|
Taiwan
|
Price:
|
$Sold USD
|
|
| General Description |
- 1980's machine TOTALLY re-manufactured in 2007/2008
Make: Bullard
Model: Dyna-Tape (EAL 1422)
Condition: Totally re-manufactured
Control" Fanuc 21i
General Description
Chuck/Table diameter: 56"
Max Swing: 68"
Table Drive: 75 hp (also NEW!)
Spindle Speeds: 8.2 rpm to 300 rpm
ATC: 16 station
Control: Fanuc 21i
|
| Comments: |
- This machine has been TOTALLY re-manufactured and re-built to "factory new" standards. The complete machine was stripped down to the raw castings, refurbished, machined where needed and repainted.
Completely NEW electrics and now fitted with a NEW Fanuc Control and drives
MANY MORE PHOTOGRAPHS AVAILABLE ON REQUEST
|
|
|
| FOR SALE: Year - 1980? Make - Bullard Model - Dyna-Tape (EAL 1422) |
|---|
| FOR SALE: Ad # 1701 , Year = 1980? , Make = Bullard , Model = Dyna-Tape (EAL 1422) |
|
|
Category: Vertical Spindle Lathe
|
Capacity: Large Bullard (56" Chuck) CNC VTL with Tool Changer
|
| Ad #
1701 |
| Year:
| 1980?
|
| Make:
| Bullard
|
| Model:
| Dyna-Tape (EAL 1422)
|
| Condition:
| Needs Work
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 76,450 lbs
|
| Dimension: L x W x H | big! |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
|
Price:
|
$SOLD USD
|
|
| General Description |
- Chuck/Table diameter: 56"
Max Swing: 68"
Table Drive: 100 hp
Spindle Speeds: 8.2 rpm to 300 rpm
16 Station ATC
Control is a Dynapath System 5
|
| Electrical Description |
|
|
| Comments: |
- This machine has now been dismantled and removed from service - a great retro-fit situationas this will save buyer at least $25,000.00 rigging costs.
All components are intact.
Add $3,000.00 for proper skidding and loading - estimated that 2 trucks will be required.
The control did need some work - otherwise, this machine was functional and mechanically very sound when it was removed from service to make room for a new machine.
Full documentation is available
We have many more detailed photographs available on request.
|
|
|
We found 15 matching ads. Now displaying the remaining 15 ads.
| FOR SALE: Year - 2003 Make - BIRMINGHAM Model - YCL-1340GH |
|---|
| FOR SALE: Ad # 8068 , Year = 2003 , Make = BIRMINGHAM , Model = YCL-1340GH |
|
|
Category: Tool Room Lathe 8in. to 14in. swing
|
Capacity: 13" x 40" Gear Head Bench Lathe with Stand, Single Phase
|
| Ad #
8068 |
| Year:
| 2003
|
| Make:
| BIRMINGHAM
|
| Model:
| YCL-1340GH
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: | 1,200 lbs
|
| Dimension: L x W x H | 73 x 30 x 33" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Swing Over Bed: 13"
Swing Over Cross Slide: 8"
Swing Over Gap Bed: 18-3/4"
Width Of Gap: 7-7/8"
Distance Between centers: 40"
Hole Through Spindle: 1-3/8"
Spindle Taper: D1-4
Spindle Speeds: 70 - 2,000 ppm
2 HP motor
8 speeds 70-2000
5C collet closer setup included
QC toolpost W/ 5 holders
|
| Electrical Description |
|
|
| Comments: |
- Steel Stand and splash guard included.
Lathe bed is constructed of high tensile strength cast iron
Rigid structure with hardened and ground ways
Precision main spindle loaded on high quality precision bearings
8 speed headstock with 70 to 2000 RPM
Permanently filtered oil headstock bath provides clean running oil for long life of bearings
Low hours and very well maintained
|
|
|
| FOR SALE: Year - NEW Make - Lansing Model - Lansing G 43" x 120" |
|---|
| FOR SALE: Ad # 1544 , Year = NEW , Make = Lansing , Model = Lansing G 43" x 120" |
|
|
Category: Heavy Duty Large Lathe 24in. & over swing
|
Capacity: 20 3/4" Bore LANSING ‘G’ Semi-Automatic Oil Country Lathe
|
| Ad #
1544 |
| Year:
| NEW
|
| Make:
| Lansing
|
| Model:
| Lansing G 43" x 120"
|
| Condition:
| New
|
| Serial #:
| On Request
|
|
| Machine Status: | New, in crate
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
New York
|
Country:
|
|
Price:
|
$ SOLD USD
|
|
| General Description |
- Swing Over Bed: 43"
DBC: 120"
Swing In Gap 58”
Swing Over Cross Slide 33”
Length of Gap 20”
Width of Bed 29 ½”
Spindle Bore 20 ¾”
Spindle Nose A1-28
Number of Speed Steps 3
Range of Spindle Speeds 0 – 177rpm
Tool Retractor Slide Travel 1 ¼”
Compound Slide Travel 14 ½”
Cross Slide (width x travel) 13 ½” x 25”
STEADY REST 3 Roller Jaws – Capacity 5” – 23”
FEEDS
Number of Longitudinal & Cross Feeds 40
Range of Longitudinal Feeds .004” - .064”
Range of Cross & Compound Feeds .003” - .053”
Rapid – Longitudinal 60”/min.
Rapid – Cross Slide 30”/min.
Rapid – Compound Slide 30”/min.
THREADS
40 Metric Threads .5 – 7.5
160 Inch Threads (TPI) Standard 60-4 120 – 1
40 Module Threads .25 – 3.75
40 Diametral Threads 120 – 8
TAILSTOCK
Quill Diameter 6”
Morse Taper M.T. #6
Quill Travel 14”
TAPER ATTACHMENT
Length of Travel 25 ½”
Amount of Taper Offset ±3 ½” / Ft.
MOTORS
Spindle 60 HP / DC
|
| Electrical Description |
|
|
| Comments: |
- Pendant Control on Apron & Control Panel on Headstock
Gap Bed
Heavy Duty Taper Attachment
2- 33” 4-Jaw Front & Rear Mounted Independent Chucks with 20 7/8in. Bore
60 HP / DC Motor & Electrical Equipment
SCR-DC Control – 3ph / 220-440v / 60Hz Input
6 Way Rapid Traverse
Extra Heavy Duty Roller Jaw Steady Rest
Coolant Equipment
Multiple Position Carriage Stop
2 Ground Steel Centers & Sleeve
Bronze Tipped Follow Rest
Built-In Hydraulic System
A-2/28 American Standard Spindle Nose
Extended Cross Slide with ‘T’ Slots
Automatic Lead Screw Reversal System
|
|
|
| FOR SALE: Year - ? Make - Jones & Lamson Model - |
|---|
| FOR SALE: Ad # 4307 , Year = ? , Make = Jones & Lamson , Model = |
|
|
Category: Centering Machines
|
Capacity: Automatic Facing & Centering Machine
|
| Ad #
4307 |
| Year:
| ?
|
| Make:
| Jones & Lamson
|
| Model:
|
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | approx 12' x 5' x 5' |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- 4" diameter Bar Capacity
4' Between Centers
2 x 6" diameter facing cutters (insert type)
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - unknown Make - Hendley Model - |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 1518 , Year = unknown , Make = Hendley , Model = |
|
|
Category: Tool Room Lathe 8in. to 14in. swing
|
Capacity: Hendley 10" Lathe
|
| Ad #
1518 |
| Year:
| unknown
|
| Make:
| Hendley
|
| Model:
|
|
| Condition:
| Fair
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 1800
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
|
Price:
|
$Sold USD
|
|
| General Description |
- Swing: 10"
Distance Between Centers: 30"
|
| Electrical Description |
|
|
| Comments: |
- Used until recently. Can be powered up with a few days notice
Would make a great machine for the basement or garage
|
|
|
| FOR SALE: Year - 1941 Make - Morey Model - Model 2-G |
|---|
| FOR SALE: Ad # 4013 , Year = 1941 , Make = Morey , Model = Model 2-G |
|
|
Category: Ram Type & Saddle Type Turret Lathes
|
Capacity: Second Operation Turret Lathe
|
| Ad #
4013 |
| Year:
| 1941
|
| Make:
| Morey
|
| Model:
| Model 2-G
|
| Condition:
| Fair
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | Requires rigger
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Swing: 15"
Bed Length: 30"
6-Station Ram-Type Turret
Spindle: 1" Through Bore
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Lodge & Shipley Model - Blue Chip 21 |
|---|
| FOR SALE: Ad # 5414 , Year = , Make = Lodge & Shipley , Model = Blue Chip 21 |
|
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: 21" x 120" Gap Bed Lathe
|
| Ad #
5414 |
| Year:
|
|
| Make:
| Lodge & Shipley
|
| Model:
| Blue Chip 21
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | Requires rigger
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Distance Between Centers: 120"
Swing Over Bed: 21-1/2"
Swing Over Cross Slide: 14-3/4"
Swing Over Gap: 36"
Distance from Spindle Nose to Start of Gap: 5-1/2"
Distance from Spindle Nose to End of Gap: 12-1/4"
Gap Casting Included
Bed Width: 15-3/4"
3-Jaw 15" Chuck
Spindle Nose: 11", D1
Spindle Bore: 3-1/2" diam.
Spindle Power: 12.5 hp
Spindle Speeds: 20 - 1,000 rpm
Spindle Speed Steps:
12 steps via a "Quick Change" Gear Box
Tail Stock with MT 5 Live Center
Steady Rest with Rollers: 12"
Steady Rest: 8"
Inch/Metric Threading
4-Way Tool Block
|
| Electrical Description |
|
|
| Comments: |
- Includes original documentation
|
|
|
| FOR SALE: Year - ? Make - LG Model - 2080 OS |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 1336 , Year = ? , Make = LG , Model = 2080 OS |
|
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: Long Bed Manual Lathe
|
| Ad #
1336 |
| Year:
| ?
|
| Make:
| LG
|
| Model:
| 2080 OS
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | Requires rigger
|
| Weight: | 5,000 lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
NC
|
Country:
|
1
|
Price:
|
$Sold USD
|
|
| General Description |
- Swing Over Cross Slides 20" x 80" centers
Spindle 3" dia Bore
Gap Bed
Inch/Metric Threads
Steady Rest (3")
Tool Post
#-Jaw Chuck - 12"
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - ? Make - Hitachi Seiki Model - 5AII |
|---|
| FOR SALE: Ad # 1311 , Year = ? , Make = Hitachi Seiki , Model = 5AII |
|
|
Category: Ram Type & Saddle Type Turret Lathes
|
Capacity: Hitachi Seiki Turret Lathe (Made in Japan)
|
| Ad #
1311 |
| Year:
| ?
|
| Make:
| Hitachi Seiki
|
| Model:
| 5AII
|
| Condition:
| Fair
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | 10' x 4' x 5' |
Machine Location:
|
| City: |
On Request
|
| State: |
NC
|
Country:
|
1
|
Price:
|
$Sold USD
|
|
| General Description |
- Max Swing 20"
Swing Over Slide 14"
Z 24"
Spindle Bore 3"
6 Station tuttet (plumbed for coolant)
|
| Electrical Description |
- 480 volts, 3 Phase12" Air Chuck
|
| Comments: |
- Could be connected up if needed
Condition is "FAIR" but would improve with a good cleaning.
|
|
|
| FOR SALE: Year - Make - Nardini Model - MS 1440E |
|---|
| FOR SALE: Ad # 7668 , Year = , Make = Nardini , Model = MS 1440E |
|
|
Category: Tool Room Lathe 8in. to 14in. swing
|
Capacity: 14" x 40" Nardini Mascote MS-1440E High Precision Lathe
|
| Ad #
7668 |
| Year:
|
|
| Make:
| Nardini
|
| Model:
| MS 1440E
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 3000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Swing: 14 "
Centers: 40 "
Spindle Bore: 1.875 "
Power: 6.75 HP
Swing Over Cross Slide: 8 "
Description: • 14in. Swing over bed
• 21in. Swing thru gap
• 8in. Swing over cross slide
• 40in. Between centers
• 18 Spindle speeds 31.5 - 2500 RPM
• Inch and MM Threading
• 1-7/8in. Spindle bore
• D-5 Spindle taper
• #3 Morse taper tailstock
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Variuos Model - 3/8, 1/2, 1" Square Tools |
|---|
| FOR SALE: Ad # 7642 , Year = , Make = Variuos , Model = 3/8, 1/2, 1" Square Tools |
|
|
Category: Manual Lathe Parts & Accessories
|
Capacity: Large Quantity of Lathe Tooling Ranging from 3/8" - 1" Square
|
| Ad #
7642 |
| Year:
|
|
| Make:
| Variuos
|
| Model:
| 3/8, 1/2, 1" Square Tools
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | Will Box and Ship
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Around 500 pieces of HSS and carbide tipped square shanked cutting tools of all types and sizes ranging from 3/8" through 1/2" to 1" square.
Some pieces of square "Steel Carbide" stock also included which can be made into custom cutting tools.
|
| Comments: |
- Most of these square cutting tools are brand new and have never been used. Many still have the protective coating on them.
See photos - these racks are FULL of cutting tools!
|
|
|
| FOR SALE: Year - 1994 Make - COSEN Model - LHT-25B |
|---|
| FOR SALE: Ad # 7519 , Year = 1994 , Make = COSEN , Model = LHT-25B |
|
|
Category: Second Operation
|
Capacity: High Speed Second Operation Turret Lathe (Hardinge Copy)
|
| Ad #
7519 |
| Year:
| 1994
|
| Make:
| COSEN
|
| Model:
| LHT-25B
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: | 990 lbs
|
| Dimension: L x W x H | 51-1/2" x 31-1/2" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Turret: 6 position
Turret Tool Holders: 19 mm (3/4")
Spindle Bore: 30 mm (1-1/16")
Spindle Power: 2 hp
Spindle Speed: 460-780-1,290-1,850 rpm
Chuck: 5-C Collet Chuck with collet closer
Bed Width: 120 mm (4-3/4")
Bed Length: 725 mm (32-3/8")
Height from Center of Lateral Cutter: 130 mm (5-1/8")
Travel of Lateral Cutter: 130 mm (5-1/8")
Scroll Chuck Capacity: (NOT included) 125 mm (5")
Collet Chuck Capacity:
Round Bar: 5 - 25 mm (3/16" - 1")
Hexagon Bar: 7 - 22 mm (1/4" - 13/16")
Square Bar: 7 - 18 mm (1/4" - 13/16")
Threading Capacity:
For Brass: 20 mm (3/4")
For Steel: 12 mm (1/2")
|
| Electrical Description |
|
|
| Comments: |
- Fitted with a 6' gravity fed Barfeeder
|
|
|
| FOR SALE: Year - Nov 69? Make - SIGMA Model - DKZ 25000\ |
|---|
| FOR SALE: Ad # 7296 , Year = Nov 69? , Make = SIGMA , Model = DKZ 25000\ |
|
|
Category: Vertical Turret Lathe (VTL)
|
Capacity: 88" Table, 100" Swing Sigma VTL
|
| Ad #
7296 |
| Year:
| Nov 69?
|
| Make:
| SIGMA
|
| Model:
| DKZ 25000\
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | Requires rigger
|
| Weight: | 85,000 lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Table: 88" diameter
Swing: 100"
4-Jaw chuck arrangement
Table Drive: 36 kW (approx. 46 hp)
Table RPM: 1 - 50 rpm in 18 steps
Head Tilt
87" Under the Rail
Ram Travel: 64"
Drilling Depth from Cross Rail Arm: 63" (1,600 mm)
Feed Ranges:
0.0012" - 0.002" - 0.003"
0.005" - 0.008" - 0.012"
0.02" - 0.03" - 0.05"
0.6" - 0.12" - 0.2"
|
| Electrical Description |
|
|
| Comments: |
- We understand that this machine is a NILES machine built under licence in the old East Germany by WMW - Union
Presently has only a Single Head. The machine originally had a dual head but this was removed at sometime. The second head is available although it does need some work doing to it to make it operational. It would also require an adaptor plate making as this is missing. If the purchaser can accept a straight head - ie no tilt for the second head, then this would be a relatively simple part to make.
Manuals included
More photos on request
Total connected Load: 57 kW
Machine still in production and can be seen and inspected under power any time!
Estimated dismantling cost and loading on to trucks or in to containers are between $10-12,000
|
|
|
|
| Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - Make - Gisholt Model - # 3 |
|---|
| FOR SALE: Ad # 1755 , Year = , Make = Gisholt , Model = # 3 |
|
|
Category: Ram Type & Saddle Type Turret Lathes
|
Capacity: Gisholt # 3 Turret Lathe
|
| Ad #
1755 |
| Year:
|
|
| Make:
| Gisholt
|
| Model:
| # 3
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
|
Price:
|
$SOLD USD
|
|
| General Description |
- Swing: 20"
DBC: 26"
Spindle Bore: 3 1/4"
6 Station Turret
10" 3-Jaw Chuck
|
| Electrical Description |
|
|
| Comments: |
- Some tooling and tool holders included
Still a very useable machine. Just needs a clean up!!
Still making good parts - owner needs room for other equipment
|
|
|
| FOR SALE: Year - 1993 Make - Eisen ? Model - 22 x 120 |
|---|
| FOR SALE: Ad # 5673 , Year = 1993 , Make = Eisen ? , Model = 22 x 120 |
|
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: 22" x 120" HEAVY DUTY GAP BED ENGINE LATHE
|
| Ad #
5673 |
| Year:
| 1993
|
| Make:
| Eisen ?
|
| Model:
| 22 x 120
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Swing Over Bed: 22"
Swing Over Gap: 30"
Length of Gap: 14"
Distance Between Centers: 120"
Spindle Bore: 2-1/2"
Spindle Speeds Range: 14 - 2,400 rpm (Gear Driven)
Inch/Metric Threading
Tail Stock
Coolant System
Work Lamp
Chuck Chip Guard
|
| Electrical Description |
|
|
| Comments: |
- Includes a 12", 3-Jaw Chuck
|
|
|
| FOR SALE: Year - ? Make - Christian Model - 11" x 24" |
|---|
| FOR SALE: Ad # 7091 , Year = ? , Make = Christian , Model = 11" x 24" |
|
|
Category: Tool Room Lathe 8in. to 14in. swing
|
Capacity: 11" x 24" Swiss Built Tool Room Lathe
|
| Ad #
7091 |
| Year:
| ?
|
| Make:
| Christian
|
| Model:
| 11" x 24"
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Swiss Made - metric only!
Swing: 11"
DBC: 24"
Spindle Bore: 1.00"
Chuck: 6"
Tailstock
NOTE: Machine is 380v/3-phase but has a 220v/3-phase transformer attached.
|
| Electrical Description |
|
|
|
|
We found 13 matching ads. Now displaying the remaining 13 ads.
| FOR SALE: Year - 1995 Make - Cincinnati Milacron Model - Lancer 1000 |
|---|
| FOR SALE: Ad # 15396 , Year = 1995 , Make = Cincinnati Milacron , Model = Lancer 1000 |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: 40" x 20" x 22"
|
| Ad #
15396 |
| Year:
| 1995
|
| Make:
| Cincinnati Milacron
|
| Model:
| Lancer 1000
|
| Condition:
| Needs Work
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Rigging Fee Extra
|
| Weight: | 11,000 lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- 1995 Cincinnati Milacron LANCER 1000
Vertical Machining Center
Control: Acramatic A2100
X Axis Travel: 40″
Y Axis Travel: 20″
Z Axis Travel: 22″
Table Size: 44″ x 20″
Table Load: 2,200 LBS
Spindle Taper: 40
Spindle Speed: 10,000 RPM
Tool Changer Capacity: 30 ATC
Machine Dimensions: 140″L x 95″W x 105″H
Machine Weight: 11,000 LBS
Machine is running but needs attention:
1. the spindle chiller is not working.
2. Also the max. speed it can run at is
6,000
rpm as it needs
new spindle bearings
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1996 Make - FADAL Model - VMC 15 |
|---|
| FOR SALE: Ad # 9090 , Year = 1996 , Make = FADAL , Model = VMC 15 |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: 20 x 16 x 20; Fadal VMC 15
|
| Ad #
9090 |
| Year:
| 1996
|
| Make:
| FADAL
|
| Model:
| VMC 15
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 8,500 lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Control: FADAL 88 HS
RS 232C Port
Travels:
X: 20"
Y: 16"
Z: 20"
Table Size: 30" x 20"
Spindle: CAT 40
Spindle Power 15 hp
Spindle Speed: 7,500 rpm
Options:
Rigid Tapping
Wired for a 4th Axis (4th axis NOT included)
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 2002 Make - Compu-Mill Model - HMC-410 |
|---|
| FOR SALE: Ad # 4171 , Year = 2002 , Make = Compu-Mill , Model = HMC-410 |
|
|
Category: Horizontal Machining Centers (HMC)
|
Capacity: COMPUMILL 410mm PALLET HMC
|
| Ad #
4171 |
| Year:
| 2002
|
| Make:
| Compu-Mill
|
| Model:
| HMC-410
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 17,600 lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Massachusetts
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- TWO MACHINES AVAILABLE:
PALLET SIZE: 16.14” X 16.14”(410 MM)
MOUNTING HOLES M16, 50 MM SPACING
MAXIMUM TABLE LOAD 700 LBS.
X-AXIS TRAVEL 24.01” (610 MM)
Y-AXIS TRAVEL 20.08” (510 MM)
Z -AXIS TRAVEL 19.70” (500 MM)
INDEX TABLE (PALLET) 360,000 POSITIONS (FULL 4TH)
DISTANCE FROM TABLE TOP TO SPINDLE NOSE 2” TO 17.72”
DISTANCE FROM TABLE CENTER TO COLUMN SLIDEWAY: 16.14”
SPINDLE TAPER CT 40
SPINDLE SPEED 80 - 12,000 RPM
DRIVE METHOD DIRECT
RAPID FEED X,Y 1180 IPM
RAPID FEED Z 1180 IPM
CUTTING FEED X,Y,Z 472 IPM
ATC 60 TOOLS
TOOL EXCHANGE TIME 1.8 SECONDS
TOOL SELECTION METHOD RANDOM BI-DIRECTIONAL, TOOL HOLDER STYLE CT 40
MAX. TOOL DIAMETER 3.3"/4.9" ADJACENT POCKET EMPTY
ACCURACIES:POSITIONING 0.0002"
FULL STROKE
REPEATABILITY 0.0001"
INDEXING +/- 3.0 ARC SECONDS
REPEATABILITY +/- 1.0 ARC SECONDS
SPINDLE MOTOR 12/15 HP AC/30
MIN.POWER REQUIREMENT 25 KVA, 220VAC,3P/60 HZ
AIR REQUIREMENT 71-100 PSI,
CONTROL FANUC 18I-M
|
| Electrical Description |
|
|
| Comments: |
- Machines have run only approx. 2,000 hours
EXTRAS:
FULL 4TH AXIS CONTOURING
THRU SPINDLE COOLANT
FLOOD COOLANT SYSTEM
FULL GUARDING
ROTARY PALLET OPERATOR
SET-UP STATION
SPINDLE CHILLER
RIGID TAPPING
WORK LAMP
|
|
|
| FOR SALE: Year - Make - Ex-Cello Model - 105 WorkCenter |
|---|
| FOR SALE: Ad # 3722 , Year = , Make = Ex-Cello , Model = 105 WorkCenter |
|
|
Category: Horizontal Machining Centers (HMC)
|
Capacity: 400 mm pallets HMC-5 axis capable
|
| Ad #
3722 |
| Year:
|
|
| Make:
| Ex-Cello
|
| Model:
| 105 WorkCenter
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: | 15,000lbs
|
| Dimension: L x W x H | 10' x 10' x 8' |
Machine Location:
|
| City: |
On Request
|
| State: |
Tennessee
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Travels:
X 24"
Y 20"
Z 16"
Table Indexing: 1 deg pogramable
Spindle Drive:
Spindle Speeds:
Spindle Nose: # 45 NMTBA TAPER (CAT 45)
Tool Changer: 24 Stations
|
| Electrical Description |
|
|
| Comments: |
- Control: Retrofitted in 1996 with a Fanuc 11M control
5th Axis Capable (installed in control)
|
|
|
| FOR SALE: Year - Make - MillPort Model - VMC-1000 |
|---|
| FOR SALE: Ad # 3698 , Year = , Make = MillPort , Model = VMC-1000 |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: LARGE MILLPORT VMC
|
| Ad #
3698 |
| Year:
|
|
| Make:
| MillPort
|
| Model:
| VMC-1000
|
| Condition:
| Fair
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Tennessee
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| Comments: |
- manuals and all available tooling
|
|
|
| FOR SALE: Year - 2004 Make - Milltronics Model - RW-30 |
|---|
| FOR SALE: Ad # 3563 , Year = 2004 , Make = Milltronics , Model = RW-30 |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: Full 5-Axis 60" x 30" VMC - Incl. 5-Axis Tables
|
| Ad #
3563 |
| Year:
| 2004
|
| Make:
| Milltronics
|
| Model:
| RW-30
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 27,000 lbs
|
| Dimension: L x W x H | 223" x 125" |
Machine Location:
|
| City: |
On Request
|
| State: |
Maryland
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- X,Y,Z = 60 x 30 x 26
Table = 63 x 23.5
Table Capacity = 6,000 lbs
Spindle Range = 25 - 4,500 rpm
Spindle HP = 30/25 hp
Spindle Bearing Diameter: = 100 mm
Standard Features:
·Fully Hardened and Ground Box Ways with Turcite Surfaces and Precision Ground Ball Screws
·PC-based CPU includes 6 Mb DiskOnChip® Parts Storage Memory Non-volatile motionless disk
·12" LCD Active Matrix Color Display with Discrete Keys
·8 Mb Virtual Disk / RS-232 with DNC Buffer and Large Program Management Software
·1300 Block/Sec High Speed Processor
·Conversational plus G & M Code Programming with 3-D Part & Tool Path Graphics
·Engraving, Helical Interpolation, Auto Routines, and User-definable Macros with Trig Assist
·Coordinate Rotating, Scaling, Mirror Image, Thread Mill and Non-Descript Pocket Clear Cycle
·Five Axes Simultaneous Interpolation Software and Interface Servos separate
·Auxiliary Keyboard Port for PC Keyboard
·Automatic Axes Thrust Bearing Lubrication
·Automatic Metered Lubrication w/Low Lube Fault
·Spare “M” Function and CNC “Wait” Channel
·Operator's Station Electronic Handwheel plus Handwheel Controlled Program Execution
·1.44 Mb Floppy Drive
·High Torque AC Digital Servo Drives
·Spindle Taper Air Blow Out
·Two Speed High Torque Closed Loop Spindle Drive RW30 has 30/25 HP (22/18 kW)
·Spindle Load Meter
·Work Lamps
·Full Metal Enclosure
·Automatic Home Sequence with Home Switches
·Spindle Chiller standard on RW30
·#50 4500 RPM Spindle Cartridge on RW30
·Metal Way Covers in Front and Rear of Saddle and Column
·Outrigger Linear Ways on RW30
·ARM Type ATC: 32 Stations
·High Pressure Flood Coolant System with Dual Nozzles
·Tool Release Button·LCD Hour Meter
·Air Blast Hose
·Chip Drawer Chip Removal System
·Wash Down Hose
·Most Software Upgrades Included in Base Price
·All Axes Laser Were Calibrated and Ballbar Inspected when new
|
| Electrical Description |
- 208-240, 3-Phase muti-tap
|
| Comments: |
- ORIGINAL PURCHASE PRICE IN APRIL 2004 WAS APPROX. US$170,000.00
ALSO HAS AN 8" RISER BLOCK IN THE COLUMN
Price Includes large Troyke FULL 5-Axis TABLE
50 Taper Spindle
Seller bought machine for a contract that never materialized
|
|
|
| FOR SALE: Year - 2000 Make - DMG Model - DMU 70 V |
|---|
| FOR SALE: Ad # 7609 , Year = 2000 , Make = DMG , Model = DMU 70 V |
|
|
Category: Universal Machining Centers
|
Capacity: 5-Axis DMG Model DMU 70 V Universal Milling Machine
|
| Ad #
7609 |
| Year:
| 2000
|
| Make:
| DMG
|
| Model:
| DMU 70 V
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Maryland
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Travels:
X 27.95”
Y 20.5”
Z 20.5”,
Spindle Speed: 12,000 RPM,
Spindle Size: Cat 40
ATC: 60 Tools,
580 psi through the spindle coolant,
238 gal coolant tank,
Rotoclear Window,
Chip Conveyor
Hand Wheel Pendant
|
| Comments: |
- 10,900 Machine Hours and 4,200 Spindle Hours
|
|
|
| FOR SALE: Year - 7/96 Make - HAAS Model - VF-6 |
|---|
| FOR SALE: Ad # 9268 , Year = 7/96 , Make = HAAS , Model = VF-6 |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: HAAS VF-6 High Torque, 64" x 32" x 30" VMC
|
| Ad #
9268 |
| Year:
| 7/96
|
| Make:
| HAAS
|
| Model:
| VF-6
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | Requires rigger
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Travels:
X: 64"
Y: 32"
Z: 30"
Spindle Nose To Table: min/max: 4"/34"
Table: 64" x 28"
Max Table Weight: 4,000 lb
Spindle Power:15 hp HIGH TORQUE
Spindle Size: CAT 40
Max Speed: 7,500 rpm
ATC:24
|
| Electrical Description |
|
|
| Comments: |
- Renishaw Touch Probe
Renishaw Tool Length Probe
Full Documentation
|
|
|
| FOR SALE: Year - 2000 Make - Okuma Model - MA-60HB |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 5801 , Year = 2000 , Make = Okuma , Model = MA-60HB |
|
|
Category: Horizontal Machining Centers (HMC)
|
Capacity: 630 mm PALLET, 39.37” x 31.5” x 31.8 OKUMA HORIZONTAL MACHINING CENTER
|
| Ad #
5801 |
| Year:
| 2000
|
| Make:
| Okuma
|
| Model:
| MA-60HB
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | Requires rigger
|
| Weight: | 52,800 lbs
|
| Dimension: L x W x H | 136” x 239” x 130” |
Machine Location:
|
| City: |
On Request
|
| State: |
Michigan
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Max. Machining Capacity: 39.37” x 31.5” x 31.89”
Max. Workpiece Size : 39.37” x 35.43”
Pallet Size: 24.8" x 24.8"
Max. Load Capacity: 2,640 lbs
Index Positions:.001 Degree Increments/360,000 Positions
Travels:
X Axis Travel: 39.37"
Y Axis Travel: 31.5"
Z Axis Travel: 31.89"
Spindle Center to Table Upper Surface: 1.97” – 33.46”
Spindle End to Table Center: 7.87” – 39.76”
Magazine Capacity: 60 Position ATC
Tool Shank Configuration: CAT 50 Taper
Spindle Speed: 50 - 10,000 RPM
Main Motor: 40 HP
Rapid Feedrate (X, Y, Z Axis): 1574 IPM
Jog Feedrates (X, Y, Z Axis): .04 to 1574 IPM
Equipped With:
OSP-U100M (Color-Display)
High-Pressure Coolant and Filter System
Chip Conveyor Spindle Oil Chiller
.001 Degree B-Axis Floppy (R/W)
Graphic Animation
Tape Storage 320m
Hi-G & HI-CUT (High Speed Contouring Software)
Synchronous Tapping Cycle Time Reduction
Shower Wash
Spindle Through Air
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1997 Make - Mitsui Seiki Model - HT4A |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 5726 , Year = 1997 , Make = Mitsui Seiki , Model = HT4A |
|
|
Category: Horizontal Machining Centers (HMC)
|
Capacity: Mitsui Seiki HT4A 4-Axis CNC Horizontal Machining Center
|
| Ad #
5726 |
| Year:
| 1997
|
| Make:
| Mitsui Seiki
|
| Model:
| HT4A
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Michigan
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Table Size: 19.8" x 19.8" (500 mm)
Number of Pallets: 2
Table Travels:
X -Axis: 28.3"
Y-Axis: 23.62"
Z-Axis: 21.65"
Table Load Capacity: 3,300 lbs
Table Indexing: .001 N/C Contouring
Rapid Rates:945 IPM X, Y, Z
Spindle Nose: CAT 50
Spindle Speed: 50 – 12,000 RPM
Tool Magazine: 120 ATC
Tool Change Time: 3 Secs
Pallet Change Time: 8 Secs
Main Motor: 30 hp
Equipped with:
Fanuc 15MB CNC Color Control
12 MB Ram
80 MB Hard Drive
1.4 MB Floppy Drive
Coolant thru The Spindle
Scale Feedback
Spindle RPM Meter
Spindle Chiller
Full Enclosures
Chip Conveyor
All manuals, Parameter Sheets, and Schematics
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1996 Make - Monarch Model - VMC75-B |
|---|
| FOR SALE: Ad # 1780 , Year = 1996 , Make = Monarch , Model = VMC75-B |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: Monarch VMC With 2-Station Pallet Changer
|
| Ad #
1780 |
| Year:
| 1996
|
| Make:
| Monarch
|
| Model:
| VMC75-B
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
|
Price:
|
$Sold USD
|
|
| General Description |
- Control: Allan-Bradley Series 9
Table/Pallet Size: 20" x 50"
Travels:
X 43"
Y 20"
Z 25"
Spindle: 25/35 (cont/30 min)
CAT 50
Spindle Speed: 6,000 rpm max
ATC: 26 Stations
Prep for Through Spindle Coolant (Plumbed only)
Fitted for flume coolant operation (central coolant/chip system),no coolant pans or pump was in central sump system
Documents
|
| Electrical Description |
|
|
| Comments: |
- Cost over $200,00 new
Always used with a sub-plate mounted on the pallets - therefore pallets in unusually "almost new" condition
|
|
|
| FOR SALE: Year - used+new Make - Various Model - HSK-63 |
|---|
| FOR SALE: Ad # 8189 , Year = used+new , Make = Various , Model = HSK-63 |
|
|
Category: CNC Parts and Accessories
|
Capacity: HSK Tool Holders, All types, NEW and USED
|
| Ad #
8189 |
| Year:
| used+new
|
| Make:
| Various
|
| Model:
| HSK-63
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Other
|
| Shipping Info: | Will Box and Ship
|
| Weight: | Various
|
| Dimension: L x W x H | various |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- A HUGE selection of HSK-63 tool holders is
available.
All types ranging from standard mill holders of
various sizes, collet holders, shell mill holders,
standard and special boring bars.
Will be sold individually or any quantity.
|
|
|
| FOR SALE: Year - Make - WELLS INDEX Model - 810 CNC |
|---|
| FOR SALE: Ad # 5589 , Year = , Make = WELLS INDEX , Model = 810 CNC |
|
|
Category: CNC & Retrofit Knee / Bed Mills w/o ATC
|
Capacity: 9" x 47" 3-AXIS CNC KNEE MILL
|
| Ad #
5589 |
| Year:
|
|
| Make:
| WELLS INDEX
|
| Model:
| 810 CNC
|
| Condition:
| Fair
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 3000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Table: 9" x 47"
Spindle Power: 3 hp
Control: Wells Index/Summit CNC 700
Inch/Metric Switchable
Quick Change 30 Spindle Taper
Spindle Speed: 50 - 4,200 rpm in 2 stages
Spindle Brake (safety)
Oil Mister
Work Light
All Manuals
|
| Electrical Description |
|
|
| Comments: |
- Surplus Equipment - came from another plant that closed down and not needed here!
|
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
| FOR SALE: Year - 1983 Make - Ching Yia Tools Model - 55N |
|---|
| FOR SALE: Ad # 1454 , Year = 1983 , Make = Ching Yia Tools , Model = 55N |
|
|
Category: Engraving, Copying & Pantograph Equip.
|
Capacity: Engraving/Pantograph Machine
|
| Ad #
1454 |
| Year:
| 1983
|
| Make:
| Ching Yia Tools
|
| Model:
| 55N
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | 4' x 3' x 6' H |
Machine Location:
|
| City: |
On Request
|
| State: |
NC
|
Country:
|
|
Price:
|
$sold USD
|
|
| General Description |
- Milling Table: 20" x 12"
Tracer Table: 16.5" x 24"
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 2004 Make - SANDVIK Model - VARIOUS |
|---|
| FOR SALE: Ad # 5385 , Year = 2004 , Make = SANDVIK , Model = VARIOUS |
|
|
Category: Manual Mill, Parts and Accessories
|
Capacity: VARIOUS BT-40 TOOL HOLDERS - NEW!
|
| Ad #
5385 |
| Year:
| 2004
|
| Make:
| SANDVIK
|
| Model:
| VARIOUS
|
| Condition:
| New
|
| Serial #:
| On Request
|
|
| Machine Status: | New, in crate
|
| Shipping Info: | Will Box and Ship
|
| Weight: | VARIUOS
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- 24 Brand New "BT-40" tool holders of various types with all original accessories and pull studs.
BRAND NEW - in original packaging
6 x Collet Tool Holders.
Collet cat # 393-14-32 - XXX (070, 100, 130, 160 or 200) sizes
End Mill Holders:
2 x 3/8"
2 x 5/8"
2 x 3/4"
2 x 1"
2 x Face Mill Holders
4 x 1/2 Chamfer Cutter Holders with chamfer Cutter (HSS)
2 x 3-1/2" diameter, 6 inserted Face Mill
Cat # R245-080Q27-12M
2 x Boring Bars Cat # R215.64.12A20-4512
|
| Comments: |
- Never used and in original packaging. Will sell as a package or individually
|
|
|
| FOR SALE: Year - 1987 Make - WEBB Model - 3 VH |
|---|
| FOR SALE: Ad # 8565 , Year = 1987 , Make = WEBB , Model = 3 VH |
|
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 10 x 50 With DRO and Power Feed in X
|
| Ad #
8565 |
| Year:
| 1987
|
| Make:
| WEBB
|
| Model:
| 3 VH
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Table: 10" x 50"
Variable Speed
Spindle Speeds: 60 - 500,500 - 4,200 rpm
Spindle Power: 3 hp
One Shot Lube
|
| Electrical Description |
|
|
| Comments: |
- Note to Condition: Does need the power feed in X and the power feed in Z (Quill) checking out as they presently do not work.
Otherwise, the machine is in very good condition and has been well maintained.
One user only since it was bought new!
Vise nor angle plate NOT sold with the machine
|
|
|
| FOR SALE: Year - Make - Baldwin Manufacturing Model - Beaver 10" x 56" |
|---|
| FOR SALE: Ad # 7092 , Year = , Make = Baldwin Manufacturing , Model = Beaver 10" x 56" |
|
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 10" x 56" Universal Mill with 12" Riser Block and Power Knee
|
| Ad #
7092 |
| Year:
|
|
| Make:
| Baldwin Manufacturing
|
| Model:
| Beaver 10" x 56"
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Table: 10 x 56"
Riser Block(s): 12" (Total)
Boxed Ways in Z (vertical)
Spindle: CAT 30
Spindle Power: 3 hp
Power Feed in Knee (Z)
|
| Electrical Description |
- 208/220 - 380/440v/3-phase
|
| Comments: |
- NOTE: Came out of a pattern shop and has cut only wood all it's life!
Some misc. tooling including CAT 30 tool holders and some collets.
|
|
|
We found 7 matching ads. Now displaying the remaining 7 ads.
| FOR SALE: Year - Make - NATCO Model - H-6 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 1463 , Year = , Make = NATCO , Model = H-6 |
|
|
Category: Multi Spindle Drill Press
|
Capacity: NATCO 24 Station Multi-Spindle Drill
|
| Ad #
1463 |
| Year:
|
|
| Make:
| NATCO
|
| Model:
| H-6
|
| Condition:
| Fair
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | Requires rigger
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
NC
|
Country:
|
|
Price:
|
$Sold USD
|
|
| General Description |
- 24 Drill Positions
Table: approx 30" x 24"
|
| Electrical Description |
|
|
| Comments: |
- Although needing some basic cleanup work, this machine is in general fair condition and operable
|
|
|
| FOR SALE: Year - 1958 Make - NATCO Model - H6 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 1462 , Year = 1958 , Make = NATCO , Model = H6 |
|
|
Category: Multi Spindle Drill Press
|
Capacity: NATCO 16 Station Multi-Spindle Drill
|
| Ad #
1462 |
| Year:
| 1958
|
| Make:
| NATCO
|
| Model:
| H6
|
| Condition:
| Fair
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
NC
|
Country:
|
|
Price:
|
$Sold USD
|
|
| General Description |
- 16 drill drive positions
Table approx 30" x 24"
|
| Electrical Description |
|
|
| Comments: |
- Although needing some basic cleanup work, the is machine is in fair condition and operable
|
|
|
| FOR SALE: Year - Make - South Bend Model - HRG |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 1461 , Year = , Make = South Bend , Model = HRG |
|
|
Category: Multi Spindle Drill Press
|
Capacity: South Bend Multi-Spindle Drill
|
| Ad #
1461 |
| Year:
|
|
| Make:
| South Bend
|
| Model:
| HRG
|
| Condition:
| Fair
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
NC
|
Country:
|
|
Price:
|
$sold USD
|
|
| General Description |
- 24 Drill Drives
Table 24" x 15"
24" Work height
|
| Electrical Description |
|
|
| Comments: |
- Although needing some basic cleanup work, this machine is generally in fair condition and operable
|
|
|
| FOR SALE: Year - 1969 Make - Cleereman Model - ADT |
|---|
| FOR SALE: Ad # 1460 , Year = 1969 , Make = Cleereman , Model = ADT |
|
|
Category: Multi Spindle Drill Press
|
Capacity: Dual Head, Multi-Spindle Drill
|
| Ad #
1460 |
| Year:
| 1969
|
| Make:
| Cleereman
|
| Model:
| ADT
|
| Condition:
| Fair
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | Requires rigger
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
NC
|
Country:
|
|
Price:
|
$sold USD
|
|
| General Description |
- Table: 40" x 24"
10 drill Drives per side
|
| Electrical Description |
|
|
| Comments: |
|
|
|
|
| FOR SALE: Year - Make - National , Union Twist Model - National & Union Twist, etc |
|---|
| FOR SALE: Ad # 7641 , Year = , Make = National , Union Twist , Model = National & Union Twist, etc |
|
|
Category: Drill / Thread Parts & Accessories
|
Capacity: Large Twist Drills & Reamers Ranging From 7/8" tp 2-14" Diam. or More
|
| Ad #
7641 |
| Year:
|
|
| Make:
| National , Union Twist
|
| Model:
| National & Union Twist, etc
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | Will Box and Ship
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
New York
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Most are USA made such as Union Twist, NationalTwist etc etc.
Between 75 - 100 drills and reamers of all sizes ranging from about 7/8" to 2-1/4" diameter or more!
|
| Comments: |
- Sold as a lot or partial lots.
|
|
|
| FOR SALE: Year - Make - Osborne Model - |
|---|
| FOR SALE: Ad # 4661 , Year = , Make = Osborne , Model = |
|
|
Category: Drill / Thread Parts & Accessories
|
Capacity: 3-1/4" MT-6 HSS TWIST DRILL
|
| Ad #
4661 |
| Year:
|
|
| Make:
| Osborne
|
| Model:
|
|
| Condition:
| New
|
| Serial #:
| On Request
|
|
| Machine Status: |
|
| Shipping Info: | Will Box and Ship
|
| Weight: | 18 lbs
|
| Dimension: L x W x H | 26" x 3.25" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Diameter: 3-1/4"
Overall Length: 26-1/2"
Flute Length: 16"
|
|
|
| FOR SALE: Year - Make - FOSDICK Model - 4ft x 12in Sensitive |
|---|
| FOR SALE: Ad # 8098 , Year = , Make = FOSDICK , Model = 4ft x 12in Sensitive |
|
|
Category: Radial Drill Press
|
Capacity: 4' X 12" FOSDICK "SENSITIVE" RADIAL DRILL
|
| Ad #
8098 |
| Year:
|
|
| Make:
| FOSDICK
|
| Model:
| 4ft x 12in Sensitive
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Ohio
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- LENGTH x COLUMN DIAMETER ..... 4' X 12"
AREA OF BASE (T-SLOTTED) ......... 53" X 30"
AREA OF TILT TABLE (T-SLOTTED) ... 42" X 24" SPINDLE SPEEDS ............. (9) 62 TO 2500 RPM
SPINDLE FEEDS .................... (4) .002/.004/.007/.010 IPR
SPINDLE STROKE ................... 10" SPINDLE DIAMETER ................. 2-1/4"
SPINDLE TAPER .................... #4 MT
SPINDLE TO COLUMN ................ 48´´ MAX. / 9" MIN.SPINDLE TO TILT TABLE ............ 23-1/2" MAX.SPINDLE TO BASE .................. 45" MAX. / 35" MIN.BASE HEIGHT ...................... 6-1/4"
TABLE TILT ....................... 360 DEGREES
POWER TABLE ELEVATION ............ YES
TAPPING .......................... YES
SPINDLE MOTOR .................... 2-1/2 HP
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - 1995 Make - Missler Model - DEB280-CENC |
|---|
| FOR SALE: Ad # 1459 , Year = 1995 , Make = Missler , Model = DEB280-CENC |
|
|
Category: Fully Automatic Horizontal Band Saw
|
Capacity: Missler -Automatic Horizontal Band Saw
|
| Ad #
1459 |
| Year:
| 1995
|
| Make:
| Missler
|
| Model:
| DEB280-CENC
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
|
Price:
|
$SOLD USD
|
|
| General Description |
- German made with Numerical Control.
Blade: 1.25"
Capacity: 11" x 11"
Round Cap: 12"
|
| Electrical Description |
|
|
| Comments: |
- Cost $63,000 NEW
Options include:
Jet Type Chip Ejector
Cut Piece Rinsing System (cleans chip from cut pieces)
Automatic Chip Conveyor
|
|
|
| FOR SALE: Year - 1973 Make - Kaltenbach Model - HDM 800 |
|---|
| FOR SALE: Ad # 8182 , Year = 1973 , Make = Kaltenbach , Model = HDM 800 |
|
|
Category: Cold Saws & Power Hack Saws
|
Capacity: 31.5" Diameter, Kaltenbach HDM 800 Cold Saw
|
| Ad #
8182 |
| Year:
| 1973
|
| Make:
| Kaltenbach
|
| Model:
| HDM 800
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- 31.5" diameter blade, cuts up to 24" WF sectionsMitre cut units for angles 45 to 90 degrees in 1 degree increments
Two cutting speeds, 42 and 84 surface feet per minute
Hydraulic, infinitely variable blade feed - 0" to 40" per minute
Coolant unit with brush
|
| Electrical Description |
|
|
| Comments: |
- Includes Six extra 31.5" blades
More photos on request
|
|
|
We found 22 matching ads. Now displaying the remaining 22 ads.
| FOR SALE: Year - Make - Blanchard Model - # 18-36 |
|---|
| FOR SALE: Ad # 5476 , Year = , Make = Blanchard , Model = # 18-36 |
|
|
Category: Vertical Spindle - Blanchard Type
|
Capacity: 36" Blanchard Model # 18-36
|
| Ad #
5476 |
| Year:
|
|
| Make:
| Blanchard
|
| Model:
| # 18-36
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 10,000
|
| Dimension: L x W x H | 4 x 7 x 9ft |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Table Dia. 36"
Table: Power: 25 HP,
Table Speed: (6)6-33 RPM
Wheel Speed: 720 RPM,
Wheel Dresser,
Load Meter
Power or Hand Elevation, Coolant Tank, Wet Base
Splash Guards
12" Under Wheel
Max. Work Load on Chuck 3,000 lbs
|
| Electrical Description |
|
|
| Comments: |
- Includes two boxes of unused grinding wheel segments and misc. spare bearings
REMAINING TABLE: 0.230"
Machine working well prior to storage - surplus now as they don't do this type of work anymore.
|
|
|
| FOR SALE: Year - 1990 Make - Nachi Model - NBS-63D |
|---|
| FOR SALE: Ad # 1453 , Year = 1990 , Make = Nachi , Model = NBS-63D |
|
|
Category: Grinding Parts & Accessories
|
Capacity: Nachi Broach Grinder (Made in Japan)
|
| Ad #
1453 |
| Year:
| 1990
|
| Make:
| Nachi
|
| Model:
| NBS-63D
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | Approx: 4500Lbs
|
| Dimension: L x W x H | 8' x 5' x 4' |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
|
Price:
|
$sold USD
|
|
| General Description |
- Designed for diamond wheels (one included)
Magnetic Chuck: 36" x 5"
Variable speed grinding head
Swivel Grinding Head
Swivel "Y" Axis
no attachments included
|
| Electrical Description |
|
|
| Comments: |
- Very well looked after machine
|
|
|
| FOR SALE: Year - Make - Norton Model - 10" x 72" |
|---|
| FOR SALE: Ad # 5416 , Year = , Make = Norton , Model = 10" x 72" |
|
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: 10" x 72" Norton OD GRinder with 14" Dia Wheel
|
| Ad #
5416 |
| Year:
|
|
| Make:
| Norton
|
| Model:
| 10" x 72"
|
| Condition:
| Fair
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Swing: 10"
Distance Between centers: 72"
Max. Grind Length: 72"
Wheel Diameter: 24"
Coolant and Filtration System
Three Steady Rests
1 x Diamond Dresser
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Brown & Sharp Model - 1024 MicroMaster |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 1353 , Year = , Make = Brown & Sharp , Model = 1024 MicroMaster |
|
|
Category: Surface Grinders
|
Capacity: Brown & Sharp 1024 Surface Grinder
|
| Ad #
1353 |
| Year:
|
|
| Make:
| Brown & Sharp
|
| Model:
| 1024 MicroMaster
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
NC
|
Country:
|
1
|
Price:
|
$Sold USD
|
|
| General Description |
- 10" Wheel
Includes a 10" x 24" Permanent Magnet Chuck
Htd. cross Feed
Coolant System
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Norton Model - 6 x 18 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 1294 , Year = , Make = Norton , Model = 6 x 18 |
|
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: Norton OD Grinder (6" dia. x 18" BDC)
|
| Ad #
1294 |
| Year:
|
|
| Make:
| Norton
|
| Model:
| 6 x 18
|
| Condition:
| Fair
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: | approx:6000Lbs
|
| Dimension: L x W x H | Approx 5'H x 5'W x 6'D |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Max grinding dia 6"
Max grinding length 18"
Wheel 20" dia, 2" wide
Spindle Motor 7.5 HP
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Landis Model - 8" |
|---|
| FOR SALE: Ad # 1293 , Year = , Make = Landis , Model = 8" |
|
|
Category: Centerless Grinders
|
Capacity: Landis 8" Centerless Grinder
|
| Ad #
1293 |
| Year:
|
|
| Make:
| Landis
|
| Model:
| 8"
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | approx 8,000lbs
|
| Dimension: L x W x H | 10' x 6' x 6' |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- 8" Wide Wheels-new wheels on machine
Spark Out Timer
Spare regulator wheel
Up to 4" Dia part
had an infeed attachment ?
has thru feed
would hold good tolerence
|
| Electrical Description |
|
|
| Comments: |
- Rigging fee applies Approx $800.00 to load onto your truck.
|
|
|
| FOR SALE: Year - 1952 Make - Thompson Model - 12 x 30 |
|---|
| FOR SALE: Ad # 5275 , Year = 1952 , Make = Thompson , Model = 12 x 30 |
|
|
Category: Surface Grinders
|
Capacity: Heavy Duty 12" x 30" Table Thompson Surface Grinder
|
| Ad #
5275 |
| Year:
| 1952
|
| Make:
| Thompson
|
| Model:
| 12 x 30
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | Requires rigger
|
| Weight: | 9,000 lbs (est)
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Georgia
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Table: 12" x 30
11" dia Grinding Wheel
Intergrated Coolant System
Includes the 25.5" x 12.5" Perm. Mag Chuck
|
| Electrical Description |
|
|
| Comments: |
- Still making parts! A great hogging machine!
|
|
|
| FOR SALE: Year - Make - DoAll Model - D-6 |
|---|
| FOR SALE: Ad # 7877 , Year = , Make = DoAll , Model = D-6 |
|
|
Category: Surface Grinders
|
Capacity: 6' x 18" DoAll Hydraulic Surface Grinder with Magnetic Chuck
|
| Ad #
7877 |
| Year:
|
|
| Make:
| DoAll
|
| Model:
| D-6
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Mag Chuck: 6" x 18" (Walker)
Mag Chuck: Manually operated
Coolant System
|
| Electrical Description |
|
|
| Comments: |
- Can be seen under power given a day's notice
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - Make - Union Twist Drill Model - |
|---|
| FOR SALE: Ad # 6599 , Year = , Make = Union Twist Drill , Model = |
|
|
Category: Tool & Cutter Grinders
|
Capacity: Drill Sharpener for Large Diameter Drills
|
| Ad #
6599 |
| Year:
|
|
| Make:
| Union Twist Drill
|
| Model:
|
|
| Condition:
| Fair
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Swivel Head
Variable Speed Wheelhead Drive
Vertical Slide for height setting
Swivel/rotate Tailstock/tool support
Simplified Tool Holding device
Manual Infeed (via lever)
Coolant system
|
| Comments: |
- A simple but effective large diameter drill sharpening grinder - Pefect for Radial Arm Drill Applications etc
|
|
|
| FOR SALE: Year - Make - Simonds Model - 84HF752V3--- |
|---|
| FOR SALE: Ad # 6593 , Year = , Make = Simonds , Model = 84HF752V3--- |
|
|
Category: Surface Grinders
|
Capacity: 84" Straight Knife Grinder
|
| Ad #
6593 |
| Year:
|
|
| Make:
| Simonds
|
| Model:
| 84HF752V3---
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Max: Grinding Length: 84"
Spindle Power: 10 hp
Coolant System with pumps etc
Auto Reciprocating Feed
Auto Cut Feed (Into workpiece)
Angle manually set and adjusted
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1977 Make - Studer Model - RHU-400/125-C |
|---|
| FOR SALE: Ad # 5185 , Year = 1977 , Make = Studer , Model = RHU-400/125-C |
|
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: Studer 5" x 16" Hydraulic Universal OD Grinder
|
| Ad #
5185 |
| Year:
| 1977
|
| Make:
| Studer
|
| Model:
| RHU-400/125-C
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 4,000 lbs
|
| Dimension: L x W x H | Mach 108" x 5' 3" x 4' 6" high |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- OD grinder
Max Swing: 5" (125mm)
Distance Between Centers: 16" (400mm)
Travel in X: 17.5" (440 mm)
Grinding Wheel (left side) Specifications:
Diameter 16"
Max Width: 2"
Bore: 127 mm
Power: 4 hp
Workhead Swivel: 90 deg
Work Table Swivel: 15 deg(?)
Wheelhead Swivel: 45 deg
Workhead Spindle Nose: MT 5
Workhead Speed Range: 30 - 675 rpm
Table Speeds: 0.05 - 5.5 meters/min (2-220 ipm)
Dresser Holder mounted onto Tailstock(footstock)
Taper Micro Correction on Tailstock(footstock)
Full Coolant and Filtration System
in operation when taken out of service-will hold
0.000050 millionths tolerance
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1977 Make - Studer Model - RHU-400/125-C |
|---|
| FOR SALE: Ad # 5185 , Year = 1977 , Make = Studer , Model = RHU-400/125-C |
|
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: Studer 5" x 16" Hydraulic Universal OD Grinder
|
| Ad #
5185 |
| Year:
| 1977
|
| Make:
| Studer
|
| Model:
| RHU-400/125-C
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 4,000 lbs
|
| Dimension: L x W x H | Mach 108" x 5' 3" x 4' 6" high |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- OD grinder
Max Swing: 5" (125mm)
Distance Between Centers: 16" (400mm)
Travel in X: 17.5" (440 mm)
Grinding Wheel (left side) Specifications:
Diameter 16"
Max Width: 2"
Bore: 127 mm
Power: 4 hp
Workhead Swivel: 90 deg
Work Table Swivel: 15 deg(?)
Wheelhead Swivel: 45 deg
Workhead Spindle Nose: MT 5
Workhead Speed Range: 30 - 675 rpm
Table Speeds: 0.05 - 5.5 meters/min (2-220 ipm)
Dresser Holder mounted onto Tailstock(footstock)
Taper Micro Correction on Tailstock(footstock)
Full Coolant and Filtration System
in operation when taken out of service-will hold
0.000050 millionths tolerance
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Winslow Model - HC-101 |
|---|
| FOR SALE: Ad # 6448 , Year = , Make = Winslow , Model = HC-101 |
|
|
Category: Tool & Cutter Grinders
|
Capacity: Winslow Exatomic HC-101 Drill Pinter Grinder with Splitter
|
| Ad #
6448 |
| Year:
|
|
| Make:
| Winslow
|
| Model:
| HC-101
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Indiana
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 1/2" Capacity
Splitter Attachment
12" dia. Wheel
Wheel Hubs
All Standard and Metric Bushings:
1/16" to 1/2" (1.6mm to 13mm)
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Cincinnati Model - 5U4D5SN-1 |
|---|
| FOR SALE: Ad # 4913 , Year = , Make = Cincinnati , Model = 5U4D5SN-1 |
|
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: Universal (ID/OD) Cylindrical Grinder
|
| Ad #
4913 |
| Year:
|
|
| Make:
| Cincinnati
|
| Model:
| 5U4D5SN-1
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Kentucky
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Just Arrived!!! More information to follow
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - BLM Model - RC 280 |
|---|
| FOR SALE: Ad # 4910 , Year = , Make = BLM , Model = RC 280 |
|
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: LARGE BLM MADEL RC 280 CRANK SHAFT GRINDER
|
| Ad #
4910 |
| Year:
|
|
| Make:
| BLM
|
| Model:
| RC 280
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 6,000 lbs est
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- All Metric machine
10-12" Swing
Distance Between Chuck Faces: 47"
Distance Between Spindle Faces: 50"
Grinding Wheel: 30" diameter
Coolant System
Also Includes:
Workpiece Counter Balance Sets
Grinding Wheel Balancer
Set of Set-Up Precision Gauges
Dual Workheads, each with a 8" chuck
|
| Electrical Description |
|
|
| Comments: |
- This machine is in EXCELLENT condition other than some simple electrical work maybe required. The hand scraped marks on the ways are still visable - Very few signs of useage
MANY MORE PHOTOGRAPHS AVAILABLE ON REQUEST
|
|
|
| FOR SALE: Year - Make - Kugel-Muller Model - KNIFE SWISHER |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 960 , Year = , Make = Kugel-Muller , Model = KNIFE SWISHER |
|
|
Category: Vertical Spindle - Blanchard Type
|
Capacity: VERTICAL SPINDLE DIE BLOCK GRINDER
|
| Ad #
960 |
| Year:
|
|
| Make:
| Kugel-Muller
|
| Model:
| KNIFE SWISHER
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
NC
|
Country:
|
|
Price:
|
$Sold USD
|
|
| General Description |
- 7" DIA WHEEL; USED TO GRIND DIE BLOCKS
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1959 Make - Blanchard Model - Blanchard # 11 |
|---|
| FOR SALE: Ad # 4791 , Year = 1959 , Make = Blanchard , Model = Blanchard # 11 |
|
|
Category: Vertical Spindle - Blanchard Type
|
Capacity: Blanchard # 11 Grinder with 16" Chuck
|
| Ad #
4791 |
| Year:
| 1959
|
| Make:
| Blanchard
|
| Model:
| Blanchard # 11
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 5,475 lbs
|
| Dimension: L x W x H | 5'3" x 3'6" x 6'8" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 16" 2-Pole Chuck (110V/1) 3RC10 Type 1R41D
Machining Cube: 20" x 7" high
Z; 11"
Wheel Speed: 1,200 rpm
Chuck Power: 15 hp
Feed In: 0.001"/min
Vertical Powered Feed: 0.003" to 0.70"/min
Wheel Size: 11" x 5" x 1" thick
Coolant System
Chuck Speed: 15, 24, 41 and 64 rpm (Gear driven)
|
| Electrical Description |
|
|
| Comments: |
- Wheels Included (see Photo)
Maintenance Manuals Included
Note: some minor repair neeeded on the Dresser attachement
Stored in the main shop area for 2 - 3 years. Ran great before being taken out of service.
|
|
|
| FOR SALE: Year - Make - Gallmeyer & Livingston Model - # 36 |
|---|
| FOR SALE: Ad # 5856 , Year = , Make = Gallmeyer & Livingston , Model = # 36 |
|
|
Category: Surface Grinders
|
Capacity: 10" x 32 Surface Grinder
|
| Ad #
5856 |
| Year:
|
|
| Make:
| Gallmeyer & Livingston
|
| Model:
| # 36
|
| Condition:
| Fair
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Table Surface: 10" x 32"
Table Overal: 52" x 14"
Grinding Wheel Diameter: 12" max
|
| Electrical Description |
|
|
| Comments: |
- Mag. Chuck NOT include - Please make offer
Runs well
|
|
|
| FOR SALE: Year - Make - Covel Model - # 5 |
|---|
| FOR SALE: Ad # 5857 , Year = , Make = Covel , Model = # 5 |
|
|
Category: Surface Grinders
|
Capacity: 26" x 8" Hydraulic Surface Grinder
|
| Ad #
5857 |
| Year:
|
|
| Make:
| Covel
|
| Model:
| # 5
|
| Condition:
| Fair
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 3,800 lbs
|
| Dimension: L x W x H | 92" x 44" x 60" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Table: 9-1/2" x 46"
Distance from Spindle to Table: 5"/17"
Vertical Travel: 11" (with 12" wheel)
Wheel Diameter: 12" max
Mag. Table: 8" x 24"
|
| Electrical Description |
|
|
| Comments: |
|
|
|
|
| FOR SALE: Year - 1999 Make - Junker Model - BUAJ-30CNC |
|---|
| FOR SALE: Ad # 1795 , Year = 1999 , Make = Junker , Model = BUAJ-30CNC |
|
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: 36" x 12" CNC Junker O.D. Grinder
|
| Ad #
1795 |
| Year:
| 1999
|
| Make:
| Junker
|
| Model:
| BUAJ-30CNC
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | Requires rigger
|
| Weight: | 25,000 lbs.
|
| Dimension: L x W x H | 10 x 10 square |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Control; Fanuc O-GC
DBC: 36"
universal type
Max Swing 12"
Auto Dresser
Hydraulic Tailstock
Coolant Separator (Paper filter)
Mist collector
Wheel: 14" dia x 1 1/2"
Part locator
|
| Electrical Description |
|
|
| Comments: |
- Used 5 total wheels on this machine...very little use.
|
|
|
| FOR SALE: Year - 2000 Make - Supertec Model - G 20 P-50 CN |
|---|
| FOR SALE: Ad # 4461 , Year = 2000 , Make = Supertec , Model = G 20 P-50 CN |
|
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: Supertec 8 x 20 CNC Cylindrical Grinding Machine
|
| Ad #
4461 |
| Year:
| 2000
|
| Make:
| Supertec
|
| Model:
| G 20 P-50 CN
|
| Condition:
| Demo Machine
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 4,400 lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Ohio
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Fanuc CNC Controller
Meehanite Castings
Infinite Variable Speed Workhead
Coolant and Filtering System
Swing 8”
Center Distance 20”
Max Grinding Dia 8”
Load Between Centers 176 lbs
Grinding Wheel 14 x 1-2 x 5”
Wheel Speed 1940 rpm
Minimum Infeed 0.0001”
Centers Taper MT 3
Work Head Speeds 50 – 5,000 rpm
Wheel Head Motor 5 Hp
For an additional a $7,500.00 we can retrofit a NEW ID Grinding spindle.
Other specifications available on request
|
| Comments: |
- “NEW” in 2000 and Only Used for one demo
Machine still has original cosmolene on it!
New Price Approx.$70,000.00 plus all options and attachment
All machine and Fanuc Manuals included with purchase
|
|
|
| FOR SALE: Year - 94?? Make - Bickford/G&L Model - FR-200 |
|---|
| FOR SALE: Ad # 5618 , Year = 94?? , Make = Bickford/G&L , Model = FR-200 |
|
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: Universal OD/ID Grinder with CAM Grinding Capabilities
|
| Ad #
5618 |
| Year:
| 94??
|
| Make:
| Bickford/G&L
|
| Model:
| FR-200
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: | 5000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Table: 13" x 59"
swing 8" max
Tailstock attachment
Swivel Wheelhead with 8" vertical Movement
Wheelhead has 3 Spindles Mounted on it:
2 OD Wheels-thru type --one on each end
1 ID Spindle
Includes cams for tap grinding:
ID Grinding attach included
a few 5C tap collets
ID spindle is a Precise Grinding spindle , 3" diam. with Precise variable speed drive.
Workhead: Swivels
Workhead Drive: 1/2 hp @ 115V
|
| Electrical Description |
|
|
| Comments: |
- FULL SET OF CAMS INCLUDED(see Photos)
These can be used to grind CAMS or TAPS
|
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| FOR SALE: Year - Make - SYSTEM 3-R Model - MAXI |
|---|
| FOR SALE: Ad # 4243 , Year = , Make = SYSTEM 3-R , Model = MAXI |
|
|
Category: EDM Parts and Accessories
|
Capacity: SYSTEM 3-R SINKER EDM TOOLING
|
| Ad #
4243 |
| Year:
|
|
| Make:
| SYSTEM 3-R
|
| Model:
| MAXI
|
| Condition:
| New
|
| Serial #:
| On Request
|
|
| Machine Status: |
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- BOTH ITEMS OFFERED AS A PACKAGE;
One each of:
System 3-R Dovetail Adaptor Plate Part # 3-R 27.2
System 3-R Dovetail Part Number 3-R 29
The pair cost $ 2,600.00 New today
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Oct 84 Make - JAPAX Model - Series S |
|---|
| FOR SALE: Ad # 8554 , Year = Oct 84 , Make = JAPAX , Model = Series S |
|
|
Category: Wire EDM Machines
|
Capacity: 14 x 8 x 6 JAPAX Wire EDM with Tilt Axes
|
| Ad #
8554 |
| Year:
| Oct 84
|
| Make:
| JAPAX
|
| Model:
| Series S
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Workpiece Size - Max: 20" x 16" x 6"
Workpiece Weight - Max: 330 lbs
Travels:
X: 14"
Y: 8"
Z: 6"
Electrode Diameter Range: 0.002" to 0.010" diam
Japax Type VH 20, 20 Amp Power Supply
Japax Type JAPT-3F CNC Control
Japax Type PW 14H Dieletric/Filter System
Automatic Lubrication
|
| Comments: |
- Machine came out of a Technical College and is in VERY GOOD condition.
All original documents included
Some reels of wire included
Many more detailed photos available
|
|
|
| FOR SALE: Year - Make - Hansvedt/South Bend Model - 150-B |
|---|
| FOR SALE: Ad # 5612 , Year = , Make = Hansvedt/South Bend , Model = 150-B |
|
|
Category: RAM / Conventional EDM Machines
|
Capacity: Single Phase (110-V) 8" x 6" x 6" Table Top EDM
|
| Ad #
5612 |
| Year:
|
|
| Make:
| Hansvedt/South Bend
|
| Model:
| 150-B
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: | 1,350 lbs
|
| Dimension: L x W x H | 30" x 60" x 72" high |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Travels:
X: 8"
Y: 6"
Z: 6"
Work Tank Size: 13" x 20" x 13 h
Work Table: 9" x 15"
Platen Size: 5" x 13-1/2"
Throat: 16" max. - 10" min.
Ram Pulser Unit (Timer)
Coolant Reservoir: 30 gallon (on Castors)
Filter: 5 micron Filter Quality
Coolant Pressure: 0 - 70 lbs adjustable
Generator: Pulse or Capacitor
Duty Cycle: 5% to 95%
|
| Electrical Description |
|
|
| Comments: |
- NOTE: Table not included in price
SINGLE PHASE - 110 Volt Required
|
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| FOR SALE: Year - 1997 Make - KADIA Model - 2VZH90350R |
|---|
| FOR SALE: Ad # 1445 , Year = 1997 , Make = KADIA , Model = 2VZH90350R |
|
|
Category: Horizontal and Vertical Hones
|
Capacity: CNC Twin Spindle Hone with 4 Station Work Switcher
|
| Ad #
1445 |
| Year:
| 1997
|
| Make:
| KADIA
|
| Model:
| 2VZH90350R
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | Requires rigger
|
| Weight: | 18,000 lbs Total
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
|
Price:
|
$Sold USD
|
|
| General Description |
- High production -High volume hone
new in 1997, used only 4 years
German Built
Twin honing spindles, independently controlled.
Auto Diameter adjustment
4 station work Switcher:
1) Load/unload
2) De-burring Station (Brush and flush)
3) Rough Hone
4) Finish Hone
Control" Unipos 470
stroke 350MM =approx 14"
Stroke Speed; 25 meters/min (1,000"/min)
Hoffman Paper Filter System
Full documentation (In English)
Includes some misc hones ranging from 1.11" in diameter up to 1.562" in diameter, but with proper tooling can hone a wider range of sizes
Dimensions:for Shipping
Computer controller- 21 in x 48 in 7 ft tall
Hone main machine:56 inches x 56 inches x 12 ft tall
Hyd. unit:38in x 60in 5ft tall
Filter system for hone oil:49in x 8ft x 5ft tall
|
| Electrical Description |
|
|
| Comments: |
- Until very recently, machine was making small engine (chain saw) cylinders
Machine is relatively young and has been very, very well looked after in it's short life
Could be classed as "Like New"
Machine was only used 3-4 years to hone small gas chain saw motors bores..
Machine Cost $479,000 USD new in 1997
|
|
|
| FOR SALE: Year - Make - Sunnen Model - MBB-1290-D |
|---|
| FOR SALE: Ad # 6592 , Year = , Make = Sunnen , Model = MBB-1290-D |
|
|
Category: Horizontal and Vertical Hones
|
Capacity: Sunnen Hone :Horizontal, BB-1290-D Hone, with Lots of Tooling
|
| Ad #
6592 |
| Year:
|
|
| Make:
| Sunnen
|
| Model:
| MBB-1290-D
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | 40" x 40" x 60" H (est) |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Model # MBB-1290-D
Spindle Speeds: 300-450 and 650-800 rpm
Work Light
Tooling: Cabinet (included) full of tool holders (approx: 15), honing stones and other tooling items.
Many of these items are new.
Example: One 4" hone sells for about $900.00 today
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Spitfire Model - SP, ML.15 |
|---|
| FOR SALE: Ad # 1776 , Year = , Make = Spitfire , Model = SP, ML.15 |
|
|
Category: Lapping & Polishing Machines
|
Capacity: 3-Station Lapping Machine
|
| Ad #
1776 |
| Year:
|
|
| Make:
| Spitfire
|
| Model:
| SP, ML.15
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
|
Price:
|
$Sold USD
|
|
| General Description |
- 3 Lapping Stations on Rotary Table
Compound Feeder
|
| Electrical Description |
|
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - Make - PAMA Model - DMA-805-S |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 1354 , Year = , Make = PAMA , Model = DMA-805-S |
|
|
Category: Gear Shapers
|
Capacity: PAMA GEAR SHAPER
|
| Ad #
1354 |
| Year:
|
|
| Make:
| PAMA
|
| Model:
| DMA-805-S
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
NC
|
Country:
|
1
|
Price:
|
$Sold USD
|
|
| General Description |
- Just arrived - in great shape
MORE DETAILS TO FOLLOW
|
| Electrical Description |
|
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - Make - 303 Stainless Steel Bar Model - 6 mm 303 Stainless Steel Bar |
|---|
| FOR SALE: Ad # 5806 , Year = , Make = 303 Stainless Steel Bar , Model = 6 mm 303 Stainless Steel Bar |
|
|
Category: Miscellaneous / Other
|
Capacity: 6 mm Diameter 303 Stainless Steel Bar - Certified
|
| Ad #
5806 |
| Year:
|
|
| Make:
| 303 Stainless Steel Bar
|
| Model:
| 6 mm 303 Stainless Steel Bar
|
| Condition:
| New
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | Approx. 10,000 lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 10,000 lbs (approx) of 6 mm Diameter certified 303
Stainless Steel bar stock in 12' Lengths.
Bought to run a job on Swiss Type machines but
contract was cancelled.
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - Make - Wysong Model - Wysong 1010 |
|---|
| FOR SALE: Ad # 5708 , Year = , Make = Wysong , Model = Wysong 1010 |
|
|
Category: Power Squaring Shear (Hydraulic)
|
Capacity: 10' x 10 Ga. Wysong Hydraulic Shear with Manual Backgauge
|
| Ad #
5708 |
| Year:
|
|
| Make:
| Wysong
|
| Model:
| Wysong 1010
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Length: 10'
Capacity:
Mild Steel 10 Gauge
Stainless Steel 12 Gauge
Aluminum 3/16 "
|
| Comments: |
- SPECIAL PACKAGE PURCHASE:
Seller is looking for best offer for this machine and two AMADA PEGAS KINGS, one with a Turbo Chip Conveyor, including hundreds of tool sets and guide assemblies, cabinets as can be seen in our ad # 5709.
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - Make - The Cincinnati Shaper Com Model - 90-14 |
|---|
| FOR SALE: Ad # 1536 , Year = , Make = The Cincinnati Shaper Com , Model = 90-14 |
|
|
Category: Press Brakes (Mechanical)
|
Capacity: Cincinnati 100 Ton Mechanical Press Brake
|
| Ad #
1536 |
| Year:
|
|
| Make:
| The Cincinnati Shaper Com
|
| Model:
| 90-14
|
| Condition:
| Fair
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Florida
|
Country:
|
|
Price:
|
$Sold USD
|
|
| General Description |
- Specs: 14ft 100 ton
Series 70-90
|
| Electrical Description |
|
|
| Comments: |
- More information to come!!!
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - Make - Scottish Machine Tool Model - 2155 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 1543 , Year = , Make = Scottish Machine Tool , Model = 2155 |
|
|
Category: Angle Bending Rolls
|
Capacity: Mechanical Structural Bending Roll
|
| Ad #
1543 |
| Year:
|
|
| Make:
| Scottish Machine Tool
|
| Model:
| 2155
|
| Condition:
| Fair
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Florida
|
Country:
|
|
Price:
|
$Sold USD
|
|
| General Description |
-
Specs: Angles – 6 in. x 6 in. x 1 in.
Beams – 18 in.
Electric Drive Motor: 25 hp
|
| Electrical Description |
|
|
| Comments: |
- Manufacturer: Scottish Machine Tool Corp. LTD (Craig and Donald)
|
|
|
| FOR SALE: Year - 2000 Make - IMCAR Model - 4RH100, 4/2 |
|---|
| FOR SALE: Ad # 5642 , Year = 2000 , Make = IMCAR , Model = 4RH100, 4/2 |
|
|
Category: Initial Pinch & Pyramid Type Plate Bending Rolls
|
Capacity: 5' x 3/16 4-Roll Hydraulic Double Initial Pinch Plate Bender
|
| Ad #
5642 |
| Year:
| 2000
|
| Make:
| IMCAR
|
| Model:
| 4RH100, 4/2
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: | 4,600 lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Working Length: 5'
Capacity: 3/16"
Central Roll Diameter: 6.7"
Lateral Roll Diameter: 5.9"
Total hp: 4 + 1
4RH100 Series are 4 roll, double initial pinch, full hydraulic plate bending machines. These units have independent hydraulic adjustment and inclination of both lateral bending rolls, hydraulic pinch roll adjustment with adjustable maximum pinch pressure, hydraulic drop end for rapid part removal and hydraulic powered rotation of the top roll and pinch roll using high efficiency hydraulic motors and planetary reduction units. Four roll plate rolls allow flat feeding of the sheet and eliminate wasteful pre-bending steps common to some other machine types.
|
| Electrical Description |
|
|
| Comments: |
- STANDARD FEATURES
Machine frame in heavy steel plate and structural sections, electro- welded, stress relieved and precision CNC machined
Hydraulic Pinch Adjustment from control station, adjustable pinch pressure
Top & pinch rolls driven via hydraulic motor/planetary reducer for near 100% efficiency in torque transmission to the rolls, energy efficient simplicity
Hydraulic powered drop end actuated from control station for rapid part removal
All rolls journaled in SKF type high dynamic load bearings with self purging seals form maximum performance under oblique loads when rolling cones
Automatic tilt of both lateral rolls from machine mounted controls for cone rolling
Machine controls in low voltage, detached foot pedals for rotation with emergency stop, machine mounted controls for all hydraulic movements
Central automated and timed lubrication available on request
Circumferential safety trip wire guard with 3 way switch,
E-Stops on controls
Drop end guard and safety clamp
Instruction manual and service tools
Cost $25,750.00 new in 2000
Has less than 40 hours use on it!!!
|
|
|
We found 5 matching ads. Now displaying the remaining 5 ads.
| FOR SALE: Year - Make - Strippit Model - Fabri-Center 51/30 |
|---|
| FOR SALE: Ad # 5191 , Year = , Make = Strippit , Model = Fabri-Center 51/30 |
|
|
Category: Turret Punch Presses-CNC
|
Capacity: 30 Ton Strippit Turret Punch Press
|
| Ad #
5191 |
| Year:
|
|
| Make:
| Strippit
|
| Model:
| Fabri-Center 51/30
|
| Condition:
| Fair
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | Requires rigger
|
| Weight: | 31,000 lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Press Capacity: 30 Ton
No. Of Turrets: 26 min. (may have more!)
Production Rate: 95 Holes/min on 1" Centers
Carriage Travels;
In X 52"
In Y: 52"
Carriage Speeds: 500 ipm (simultaneously)
Max. Workpiece Size: 51" x 51" x 1/4"
Ram Stroke: 7/8"
Feed Clearance: 13/16"
Accuracy: +/- 0.005" non-accumulative Tolerance
Hole Sizes.
Minimum: 0.031" in 16 ga Mild Steel
Maximum: 1-1/4" Dia. in 0.250" Mild Steel
3-1/2" Dia. in 10 ga Mild Steel
5" Dia. in 14 ga Mild Steel
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1976 Make - Strippit Model - FC-1000 |
|---|
| FOR SALE: Ad # 6446 , Year = 1976 , Make = Strippit , Model = FC-1000 |
|
|
Category: Turret Punch Presses-CNC
|
Capacity: 30 Ton, 20 Station Strippit Turret Punch
|
| Ad #
6446 |
| Year:
| 1976
|
| Make:
| Strippit
|
| Model:
| FC-1000
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 10,000 lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 20 Station Turret
1 x Station notcher
30 ton
50" throat
1/4" in 3/8" capacity
3.5" hole in 1/8"
Programs stored on either disc or tape and machine can be run from either
|
| Electrical Description |
|
|
| Comments: |
- No tooling Included in price but may have some for sale if needed (extra price)
Well maintained
Gaurenteed to run!!
|
|
|
| FOR SALE: Year - 1977(?) Make - Strippit Model - FC 1000 Fabri Center |
|---|
| FOR SALE: Ad # 8566 , Year = 1977(?) , Make = Strippit , Model = FC 1000 Fabri Center |
|
|
Category: Turret Punch Presses-CNC
|
Capacity: 30 Ton, 20 Station Strippit NC Fabri Center Punch Press
|
| Ad #
8566 |
| Year:
| 1977(?)
|
| Make:
| Strippit
|
| Model:
| FC 1000 Fabri Center
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Capacity: 30 Ton
Tool Stations: 20
|
| Electrical Description |
|
|
| Comments: |
- Was working perfectly until no longer needed in production (bought a new machine).
Give an offer as this machine is ready to go
|
|
|
| FOR SALE: Year - 1981 Make - AMADA Model - Coma 50-60-72 |
|---|
| FOR SALE: Ad # 5982 , Year = 1981 , Make = AMADA , Model = Coma 50-60-72 |
|
|
Category: Turret Punch Presses-CNC
|
Capacity: 50 Ton, 56 Tool Amada Coma NC Turret Punch
|
| Ad #
5982 |
| Year:
| 1981
|
| Make:
| AMADA
|
| Model:
| Coma 50-60-72
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 39,700 lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Control: Fanuc 200-B
Capacity …………………………… 50 Ton
Sheet Size……………… 60" x 72"(Longer Using Auto Repo)
Thickest Material ………………… 1/4" (3/8" Optional Clamping Req.)
Max. Hole Dia. In 1/4" M.S. …… 2 3/4"
Max. Hole Dia.…………………… 4 1/2"
Number of Stations …………… 58 Sta. 2- Auto Index
Ram Stroke Length…………… 1 1/4"
Strokes per Minute, Nibbling... 300
Axis Speed........................... 2000 In./Min.
Turret Speed......................... 30 R.P.M.
Hits per Minute 1" Moves....... 200
Nibbling Hits per Minute…… 300
Tape Format ……………… E.I.A. or A.S.C.I.I.
Programming Mode ……… Absolute/Incremental
Smallest Programmable Increment.. .001"
Tape Reader................... 240 Char./Sec.
Axis Drive...................... DC Motor
Turret Drive................... DC Motor
|
| Comments: |
- Includes 100's of tools, new and used (see photo)
|
|
|
| FOR SALE: Year - Make - Amada Model - Pega King |
|---|
| FOR SALE: Ad # 5709 , Year = , Make = Amada , Model = Pega King |
|
|
Category: Turret Punch Presses-CNC
|
Capacity: 33 TON, 58 STATION AMADA PEGA KING with 40" x 50" TABLE
|
| Ad #
5709 |
| Year:
|
|
| Make:
| Amada
|
| Model:
| Pega King
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- NOTE!!! TWO MACHINES AVAILABLE
33 Tons
40" X 50" Table
Repositioning
58 Station
2 Auto Index Stations
475 Strokes Per Minute
Fanuc 6M Control
Pnematic Clutch & Brake
100's of pieces of tooling, guide sets and cabinets included
One of the machines has a Turbo Chip Conveyor
Model No. 6398-8005 Serial No. 310409
|
| Comments: |
- Need to sell to make room for a new laser system coming in.
Both machines were recently bored and sleeved by Turret Sleeving and both machines are in really good working condition and under power
SPECIAL PACKAGE PURCHASE:
Seller is looking for best offer for both Pegas,
one with a Turbo Chip Conveyor, including hundreds of tool set and guide assemblies, cabinets and the 10' x 10 ga Wysong Hydraulic Shear as can be seen in our ad # 5708.
|
|
|
We found 5 matching ads. Now displaying the remaining 5 ads.
| FOR SALE: Year - 2005/6 Make - Horn CSM Model - A89TNC-PB |
|---|
| FOR SALE: Ad # 8051 , Year = 2005/6 , Make = Horn CSM , Model = A89TNC-PB |
|
|
Category: Benders-Pipe and Tube
|
Capacity: 3-1/2" Capacity CNC Tube/Pipe Bending Machine
|
| Ad #
8051 |
| Year:
| 2005/6
|
| Make:
| Horn CSM
|
| Model:
| A89TNC-PB
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | Requires rigger
|
| Weight: | 13,200 lbs/6,000 kg
|
| Dimension: L x W x H | 6,700 x 1450 x 1750 mm |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Bending Capacity / Round Tube / Mild Steel (S=40kgf/mm2) mm 89.0 x 4.0
Bending Capacity / Round Tube / Non-Ferrous (S=25kgf/mm2) mm 89.0 x 7.0
Bending Capacity / Round Tube / Stainless (S=60kgf/mm2) mm 89.0 x 2.5
Bending Capacity / Square Tube / Mild Steel (S=40kgf/mm2) mm 60.0 x 5.0
Max. Bending Radius mm 50 ~ 300
Max. Bending Angle Degree 190
Max. Difference Between two Radii (R2-R1) mm NA
Max. Length over Mandrel mm 2600
Working Height mm 1160
Tooling Center Line Height mm 55
DOB (Bending) Speed deg / sec 30
Accuracy of DOB (Bending) Degree ±0.15
POB (Rotation) Speed deg / sec 94
Accuracy of POB (Rotation) Degree ±0.1
Motor for Hydraulic Kw 12.5
Max. Pressure kgf / cm2 140
Hydraulic Tank Capacity Liter 160
Machine Length mm 5200
Machine Width mm 1350
Machine Height mm 1350
Machine Weight Kg 3500
Accuracy of DBB (Feeding) mm ±0.1
POB (Rotation) Speed deg / mm 240
Accuracy of POB (Rotation) Degree ±0.1
Motor for Hydraulic Kw 7.5
Total Power Kw 32
Max. Pressure kgf / cm2 140
Hydraulic Tank Capacity Liter 180
Control:
PLC Based with 10" LCD Touch Screen Control.
Right Hand Bending.
Single Stack Tooling.
BEND (C axis) is driven by Hydraulic drive system and encoder.
Smart Carriage
Rotation (B axis) - AC Servo Motor Drive. Gives exact and repeatable plane of bend position. Distance between bends (Y axis), with 8 adjustable stops for gauging the distance between bends.
Program Storage: Max. 100 components with up to 10 bends.
Digital setting and memory for Pressure of bending, clamping and mandrel retraction.
Spring Back Compensation Setting.
Display of malfunctions.
Pressure Die assist with adjustable controls (Booster).
Anticipated Mandrel Retraction Unit (AMRU).
Drop away Clamp.
Water Cooling System. (optional air system).
One-shot Slideway Lubrication to bend arm assembly for helping to reduce maintenance time.
Foot Pedal Cycle Start-E-Stop.
Wiper Die Bracket.
3 Mandrel Rods.
Operator and Maintenance Manuals.
Tool Box with basic tools.
Electricity: As Required.
Bending Capacity may vary depending on OD, WT, CLR and Material.
The general information in this document is not binding in details.
Horn Machine Tools, Inc. retains the right to amend designs from time to time without prior notice.
Single stack bender with a manual Y axis
|
|
|
| FOR SALE: Year - Make - Fenn Model - HydroFormer 2-H |
|---|
| FOR SALE: Ad # 8052 , Year = , Make = Fenn , Model = HydroFormer 2-H |
|
|
Category: Swagers
|
Capacity: 2" FENN 2-H Hydroformer
|
| Ad #
8052 |
| Year:
|
|
| Make:
| Fenn
|
| Model:
| HydroFormer 2-H
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: | 2000
|
| Dimension: L x W x H | 5 x 5 x 5 |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Hydraformer
Capacity: 2" tube
Solids: 15/16"
3" depth
2 piece Die-extra rollers & hammers
lots of tooling approx: $10,000 worth
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Superior Mufflers/Worth Model - 2-1/2" |
|---|
| FOR SALE: Ad # 6634 , Year = , Make = Superior Mufflers/Worth , Model = 2-1/2" |
|
|
Category: Benders-Pipe and Tube
|
Capacity: Hydraulic Muffler Pipe Bender with Tooling
|
| Ad #
6634 |
| Year:
|
|
| Make:
| Superior Mufflers/Worth
|
| Model:
| 2-1/2"
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | 5' x 3' x 4' |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Bend Radius Settings: 0 - 180 deg.
Internal Pipe Swaging Mandril Attachment (with sets of swages)
5 Hp motor
Unit on Castors
|
| Electrical Description |
|
|
| Comments: |
- Sets of Internal Swages.
Sets of dies (2 x half dies and a radius die) for the following pipes:
1-3/8" dia.
1-5/8" dia.
2" dia. (2 sets)
2-1/8" dia. (2 sets)
2-3/8" dia.
2-1/2" dia.
|
|
|
| FOR SALE: Year - 1959? Make - Pines Model - 3/4 |
|---|
| FOR SALE: Ad # 5983 , Year = 1959? , Make = Pines , Model = 3/4 |
|
|
Category: Benders-Pipe and Tube
|
Capacity: Pines Model 3/4 Pipe Bender With Lots of Tooling
|
| Ad #
5983 |
| Year:
| 1959?
|
| Make:
| Pines
|
| Model:
| 3/4
|
| Condition:
| Fair
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 2,750 lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Maximum Radius..........................10"
Maximum Tube Length Over Mandrel........9'11"
Average Maximum Bending Arm Speed.......27 RPM
Height From Floor to Centerline of
Bending Form 35"
Maximum Bend Angle..........180 Degrees +
Overbend
Bend Angle Accuracy...........+ or - 1/4 Degree
BENDING CAPACITIES
I.P.S. Extra Heavy Pipe.........3/4" (Schedule
80)
Non-Ferrous Tubing Y.P. to 12,000 PSI...1-1/2" OD
x .093" Wall
Non-Ferrous Tubing Y.P. to 25,000 PSI...1-1/2" OD
x .065" Wall
Steel Tubing Y.P. to 40,000 PSI.........1-3/8" OD
x .065" Wall
Stainless Steel Tubing Y.P. to 60,000 PSI: 1-1/8"
OD x .065" Wall
Steel Bar Round Y.P. to 40,000 PSI......3/4"
Diameter
Steel Bar Square Y.P. to 40,000 PSI.....11/16"
Square
Angle Iron Y.P. to 40,000 PSI...........1-1/4" x
1-1/4" x 3/16"
Square Tube (Mild Steel)................1" x
.065" Wall
Rectangular Tubing (Mild Steel) E-Plane..1" x 1-
1/4" x .065"
Rectangular Tubing (Mild Steel) H-Plane..1" x 1-
1/4" x .049"
|
|
|
| FOR SALE: Year - 1997 Make - Ercolina Model - TB 60 -Top Bender |
|---|
| FOR SALE: Ad # 5977 , Year = 1997 , Make = Ercolina , Model = TB 60 -Top Bender |
|
|
Category: Benders-Pipe and Tube
|
Capacity: 2-1/2" Pipe Dia Cap.: Pipe/Tube Bender
|
| Ad #
5977 |
| Year:
| 1997
|
| Make:
| Ercolina
|
| Model:
| TB 60 -Top Bender
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: | 430 lbs
|
| Dimension: L x W x H | 30" x 20" x 36"H |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Capacity:
Min. Diameter: 1/4"
Max. Diameter: 2-1/2"Pipe
Min. CLR: 2D
Max. CLR: 15"
Angle Range: 0 - 180 deg
Bending Speed: 2.5 rpm max.
Mandrel Capable? - NO
Programming: NC 10 Individual programs with (9) bends within each.
|
| Electrical Description |
|
|
| Comments: |
- Ideal for bending pipe, tube, squares, rectangles, solids and other profiles.
Bends ferrous and non-ferrous materials from 1/4" to 2-1/2"
Includes:
Dual Footpedal
Documentation
Die sets for (round) 1/2", 3/4", 1" 1-1/4", 1-1/2",2" & 2-1/2 dia.
NOTE: A couple of these die sets have been heavily used, others don't seem to have been used at all.
|
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| FOR SALE: Year - 1990 Make - GEKA Model - Geka Hydracrop #55A |
|---|
| FOR SALE: Ad # 4189 , Year = 1990 , Make = GEKA , Model = Geka Hydracrop #55A |
|
|
Category: Ironworkers
|
Capacity: GEKA 55-TON HYDRAULIC IRONWORKER
|
| Ad #
4189 |
| Year:
| 1990
|
| Make:
| GEKA
|
| Model:
| Geka Hydracrop #55A
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: |
|
| Weight: | 4,100 lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
-
IRONWORKERS
4" x 4" x 1/2" Geka Hydracrop #55A ,55 Ton, 20"thr,work tbl.w/gauge,12" shear
Capacity 55 Tons
Shear Capacities:
Maximum Flats: 5/8" x 12" or 3/4" x 8"
Maximum Angles: 4" x 4" x 1/2" or 4-1/2" x 4-1/2" x 3/8"
Maximum Bar: 1-9/16" Round & Square
Maximum Punch: 1-1/8" x 1/2" or 3/4" x 3/4"
Maximum Notch: 1-5/8" x 3-1/2" x 3/8" Thick
Throat Depth 20"
Stroke Speed 43
Motor 6½ H.P. 230/460 Volt, 3 Phase
Equipped With:
20" Deep Punch End Throat
Work Table on Punch and Coper Ends w/ Adjustable Back Stops
Electric Length Gauge
Electric Foot Pedals
20 plus punches & dies
Worklight
|
| Comments: |
- Other Comments:
Both Foot Pedals Can Operate Independently or Simultaneously at Full Capacity
2-Speed Operation on Each Section of Machine
|
|
|
| FOR SALE: Year - Make - Heck Model - 3-C |
|---|
| FOR SALE: Ad # 6553 , Year = , Make = Heck , Model = 3-C |
|
|
Category: Powered: Hole / Turret Punches
|
Capacity: Heck Trace-A-Punch Duplicator, Model 3-C, Nibbler and Punch
|
| Ad #
6553 |
| Year:
|
|
| Make:
| Heck
|
| Model:
| 3-C
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | Will Box and Ship
|
| Weight: | 150 lbs
|
| Dimension: L x W x H | 12" x 15" x 50" With stand |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Cutting Capacity:
Mild Steel, Stainless Steel and Plastics: 1/8" max
Throat: 6-3/4"
Motor: 1.5 hp
Strokes per minute: 1,750 spm
Work Light
Stand
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1985 Make - Scotchman Model - 314-C |
|---|
| FOR SALE: Ad # 5984 , Year = 1985 , Make = Scotchman , Model = 314-C |
|
|
Category: Ironworkers
|
Capacity: 40 Ton Scotchman 314-C Ironworker
|
| Ad #
5984 |
| Year:
| 1985
|
| Make:
| Scotchman
|
| Model:
| 314-C
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: | 1300 lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
New York
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Model: 314-C
Flat Bar Capacity:
Punch Capacity:
Angle Shear Capacity: 3" x 3" x 0.25"
Tonnage: 40
Specification Description
TONNAGE 40 TON
BAR SHEAR 14"
ANGLE SHEAR 3"
WEIGHT 1300 LBS
Model 314C -std specs-verify..
Throat depth 6"
Punching: 1" diameter x 1/2" thick, 11/4" diameter x 3/8" thick
Cropping: angle 3" x 3" x 5/16" @ 90 degrees, 2" x 2" x 5/16" @ 45 degrees
Shearing: 10" x 1/4", 6" x 1/2", 5" x 5/8"
Dimensions: 4' Length x 2'4" Width x 4'4" Height
Power: 3 HP
|
| Electrical Description |
|
|
| Comments: |
|
|
|
|
We found 5 matching ads. Now displaying the remaining 5 ads.
| FOR SALE: Year - Make - Lincoln Model - |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 1539 , Year = , Make = Lincoln , Model = |
|
|
Category: Mig & Tig Arc Welders
|
Capacity: 8 Station Lincoln Welding Unit
|
| Ad #
1539 |
| Year:
|
|
| Make:
| Lincoln
|
| Model:
|
|
| Condition:
| Fair
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Florida
|
Country:
|
|
Price:
|
$sold USD
|
|
| General Description |
- Spec: (8) Welding Stations
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Hobart Model - Hobart RC 400 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 1319 , Year = , Make = Hobart , Model = Hobart RC 400 |
|
|
Category: Portable Welders
|
Capacity: Hobart 400 Amp Portable DC Power Supply
|
| Ad #
1319 |
| Year:
|
|
| Make:
| Hobart
|
| Model:
| Hobart RC 400
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | approx 4' x 4' x 3' |
Machine Location:
|
| City: |
On Request
|
| State: |
NC
|
Country:
|
1
|
Price:
|
$sold USD
|
|
| General Description |
|
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Miller Model - Miller Goldstar 400SS |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 1320 , Year = , Make = Miller , Model = Miller Goldstar 400SS |
|
|
Category: Portable Welders
|
Capacity: 400 Amp Portable DC Welder Power Supply
|
| Ad #
1320 |
| Year:
|
|
| Make:
| Miller
|
| Model:
| Miller Goldstar 400SS
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | approx 4' x 4' x 3' |
Machine Location:
|
| City: |
On Request
|
| State: |
NC
|
Country:
|
1
|
Price:
|
$sold USD
|
|
| General Description |
- NOTE:
Power Supply Only.
Power Supply for wire feeds
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Miller Model - Deltaweld 650 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 1321 , Year = , Make = Miller , Model = Deltaweld 650 |
|
|
Category: Mig & Tig Arc Welders
|
Capacity: Miller Deltaweld 650 Power Supply
|
| Ad #
1321 |
| Year:
|
|
| Make:
| Miller
|
| Model:
| Deltaweld 650
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | approx 4' x 4' x 3' |
Machine Location:
|
| City: |
On Request
|
| State: |
NC
|
Country:
|
1
|
Price:
|
$sold USD
|
|
| General Description |
- NOTE:
Power Supply Only
Power supply for wire feeds
Customer has 2 of these units for sale
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Donaldson Torit Model - Model 84 |
|---|
| FOR SALE: Ad # 6594 , Year = , Make = Donaldson Torit , Model = Model 84 |
|
|
Category: Dust / Exhaust Collectors
|
Capacity: Torit Model 84 Dust Extraction Unit
|
| Ad #
6594 |
| Year:
|
|
| Make:
| Donaldson Torit
|
| Model:
| Model 84
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | 3' x 3' x 6' H approx |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Motor Power: 3 hp
4" Connector Tube
Unit mounted on castors for mobility
|
| Electrical Description |
|
|
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| FOR SALE: Year - 1982 Make - Draflex Model - 15 Ton |
|---|
| FOR SALE: Ad # 5521 , Year = 1982 , Make = Draflex , Model = 15 Ton |
|
|
Category: Hydraulic C-Frame Press
|
Capacity: 15 Ton "Negri" Style Hydraulic Injection Press
|
| Ad #
5521 |
| Year:
| 1982
|
| Make:
| Draflex
|
| Model:
| 15 Ton
|
| Condition:
| New
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Capacity: 15 Ton
Table Size" 12" x 12"
Throat: 12"
|
| Electrical Description |
|
|
| Comments: |
- 3 NEW units - never taken off their skids
7 USED units complete
50 or more incomplete units (some minus controls, some minus hydraulics etc)
|
|
|
| FOR SALE: Year - Make - Chicago Dreis & Krump Model - SS-150-48-120 |
|---|
| FOR SALE: Ad # 5409 , Year = , Make = Chicago Dreis & Krump , Model = SS-150-48-120 |
|
|
Category: Gap Frame Presses
|
Capacity: 150 TON, 150" x 48" Bed Gap Frame Press
|
| Ad #
5409 |
| Year:
|
|
| Make:
| Chicago Dreis & Krump
|
| Model:
| SS-150-48-120
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | Requires rigger
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Mechanical Action
Press Capacity: 150 Tons
Bed Size: 150" x 48"
Max. Opening: 12"
NOTE: Bed raised additional 8"
Safety Gate with touch sensor strip
2 x Safety Cups
Infeed System comprising of:
PLC Controller (GE 300 Line Control)
6 Feed Rolls
Split Rolls (To run 2 different dies at the same time)
Requires a 3' pit
|
| Electrical Description |
|
|
| Comments: |
- This large press has only ever cut aluminum foil or 1" fibre glass sheets
More photographs on request
|
|
|
| FOR SALE: Year - Make - Fabriline 3 Model - F-459 |
|---|
| FOR SALE: Ad # 5678 , Year = , Make = Fabriline 3 , Model = F-459 |
|
|
Category: Miscellaneous Presses
|
Capacity: 100 Ton Fabriline Beam Punch/Press Line
|
| Ad #
5678 |
| Year:
|
|
| Make:
| Fabriline 3
|
| Model:
| F-459
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Wisconsin
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Equipment Type: Beam line
Make: Fabriline 3
Model: F-459
Capacity: 100 ton
No of Punches: 3 total (1 vertical, 2 horizontal)
Controls: Automatic Controls, computer 286, floppies
Last updated: 1986 (controls updated)
Conveyors: 50' each side
Beam turning system: Yes
|
| Electrical Description |
|
|
| Comments: |
- Equipment Type: Beam line
Make: Fabriline 3
Model: F-459
Capacity: 100 ton
No of Punches: 3 total (1 vertical, 2 horizontal)
Controls: Automatic Controls, computer 286, floppies
Last updated: 1986 (controls updated)
Conveyors: 50' each side
Beam turning system: Yes
Notes:
Controls were last updated in 1986 and we recently spoke to the technician who
performed the work. He assured us that the system is fully operational as it is, and does not need upgrading.
|
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| FOR SALE: Year - 1997/8 Make - KOMATSU Model - RAZOR |
|---|
| FOR SALE: Ad # 7876 , Year = 1997/8 , Make = KOMATSU , Model = RAZOR |
|
|
Category: Plasma
|
Capacity: 4' x 8', 40 Amp Komatsu RAZOR Fine Plasma Cutting MAchine
|
| Ad #
7876 |
| Year:
| 1997/8
|
| Make:
| KOMATSU
|
| Model:
| RAZOR
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Cutting Area: 4' x 8'
Generator Output: 40 Amp
Plasma Unit: Type JU 1201, Fine Plasma unit G-940-II
System Model: KPG940-B2
Gas Cooling Unit
Cutting Capacity - (General and Depending upon cutting speed):
1/4" in Mild Steel
7 ga in Stainless Steel
14 ga in Aluminum
All original documents - Programming, operational, maintenance, parts etc
|
| Electrical Description |
|
|
| Comments: |
- The owner reports that there is a small problem with the machine. Apparently, after correctly cutting a number of times, it will sometimes just take off in one axes.
More photos on request
|
|
|
| FOR SALE: Year - Make - Hypertherm Model - 10 x 25 |
|---|
| FOR SALE: Ad # 5698 , Year = , Make = Hypertherm , Model = 10 x 25 |
|
|
Category: Plasma
|
Capacity: 10' x 25' Plasma Fuel Gas Cutting Table
|
| Ad #
5698 |
| Year:
|
|
| Make:
| Hypertherm
|
| Model:
| 10 x 25
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Michigan
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Cutting Surface: 10' x 25' per Tank
(2) HT 2000 Hypertherm Power Sources
(1) Burny-5 with 540 Servo Pac
(2) Plasma Torches
(2) Fuel Gas Torches
(2) Water Tanks
|
| Comments: |
- UPGRADED IN 1998
New Drive Motors in 2005
New 120' Gear Racks
Pierces up to 1" in steel
Cut upto 1-1/2" in steel
|
|
|
| FOR SALE: Year - 2000 Make - Precision Cutting Systems Model - 4ft x 8 ft |
|---|
| FOR SALE: Ad # 5613 , Year = 2000 , Make = Precision Cutting Systems , Model = 4ft x 8 ft |
|
|
Category: Water Jet
|
Capacity: Gantry Style 4ft. x 8ft. Waterjet (Dual Head capability)
|
| Ad #
5613 |
| Year:
| 2000
|
| Make:
| Precision Cutting Systems
|
| Model:
| 4ft x 8 ft
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Type: Gantry style cutting table w/ Paser 3 cutting head
Rigged for dual head cutting capability.
Rise/Fall cutting table for cutting under water.
NEE control w/ shape library (NEE is a division of Cleveland Motion Control (Manufacturers of motors for Bridgeport and others)
Networkable for offline programming using G-Code or CAD-CAM package of your choice. (Programable in G-Code using Notepad.)
Flow Dual Intensifier - 50Hp pump in great condition
Manual Z
Dual Cutting Head capability. (This allows you to cut out two identical parts at a time)
Cooling fan and pump for Flow pump (this cools the hydraulic fluid)
4 foot x 8 foot cutting envelope
Touchsystems touchscreen
Booster pump and 3 filter system for incoming water
200 lb garnet hopper
Presently use a .012 sapphire orifice and a .040 nozzle for cutting
Water only cutting capable for foam, plastic, and gasket materials
Gantry is made by Precision Cutting Systems
Options
Motor Starter $2500.00
|
| Comments: |
- Flow Dual Intensifier - 50Hp pump in great condition
In addition to allowing the use of two cutting heads, the dual intensifier gives the capability of isolating each head. This allows comntinued operation should a seal blow etc until spares arrive.
Breakdown, installation and setup by Precision Cutting systems to be negotiated by Purchaser
You can break this machine down yourself and reinstall.
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - 95? Make - JOY Model - D185QP |
|---|
| FOR SALE: Ad # 5291 , Year = 95? , Make = JOY , Model = D185QP |
|
|
Category: Air Compressors, Rotary Screw Type
|
Capacity: Joy Compressor, Kelco Sand Blaster and Jack Hammer
|
| Ad #
5291 |
| Year:
| 95?
|
| Make:
| JOY
|
| Model:
| D185QP
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Complete System Including:
Portable (on trailer) Joy D185QP Screw Compressor
Jack Hammer with 8 Bits
Commercial Kelco Model # 114 Sand Blaster and Hoses
More Photographs Available
|
|
|
| FOR SALE: Year - Make - Ingersoll-Rand Model - SSR-EP15 |
|---|
| FOR SALE: Ad # 7818 , Year = , Make = Ingersoll-Rand , Model = SSR-EP15 |
|
|
Category: Air Compressors, Rotary Screw Type
|
Capacity: 53 cfm, 15 hp, Ingersol-Rand Rotary Screw Compressor
|
| Ad #
7818 |
| Year:
|
|
| Make:
| Ingersoll-Rand
|
| Model:
| SSR-EP15
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Tennessee
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Rotary Screw
53 CFM @ 125 PSIG
15 hp
|
| Electrical Description |
|
|
| Comments: |
|
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 2006 Make - FADAL Model - VMC 6030-HT |
|---|
| FOR SALE: Ad # 8240 , Year = 2006 , Make = FADAL , Model = VMC 6030-HT |
|
|
Category: Engine & Machine Shop Equip.
|
Capacity: 60 x 30 FADAL 5-Axis VMC for Cylinder Head Machining
|
| Ad #
8240 |
| Year:
| 2006
|
| Make:
| FADAL
|
| Model:
| VMC 6030-HT
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | Requires rigger
|
| Weight: | 20,000 lbs
|
| Dimension: L x W x H | 158"W X 103"D X 122"H |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Box Way Construction
Full 5-Axis Simultaneous Operation
Table Size: 62.5" X 30"
Max Table Load: 4,120 Lbs
Spindle Nose to Table 5.5" TO 35.5"
Travels:
X-Axis: 60"
Y-Axis: 30"
Z-Axis: 30"
Spindle Taper: 40 Taper
Speed Speed: 40 RPM to 10,000 rpm inf variable via Auto HI/LOW Drive
Spindle Motor Power: 22.5 hp
Positions 30 ATC
Max. Tool Diameter 6" (Without Adjacent Tools) -(4.5" w/30 tools).
Max. Tool Length 15",
Max. Tool Weight 15 lbs.
Rapid Rate 400 IPM
Cutting Rate 0.01" to 250 IPM
Axis positioning ±.0003". repeatability ±.00015".
Control: FADAL MULTIPROCESSOR
OPTIONS:
30 ATC
4 MB RAM Memory on CNC
Rigid Tapping
Remote Manual Pulse Generator Panel w. E-Stop
Glass Scales on X, Y and Z axis. (Heidenhain)
Air-Hydraulic Pump for 4th and 5 th Axis
4th Axis Interface
5th Axis Interface
Rotary Tables:
A-Axis Table: NIKKEN CNC 401, 0.001 deg indexing
B-Axis Table: NIKKEN CNC 200, 0.001 deg indexing
|
| Electrical Description |
|
|
| Comments: |
- * This is a FULL contouring 5-axis milling machine that has been set up specifically to machine Cylinder Heads of different types. It can of course be used for any other 5-axis work in mold, aerospace or medical applications.
Included in the price are fixture plates for the following Cylinder Heads:
Small Block Chevy, 4.400"
Small Block Chevy, 4.500"
Small Block Ford, 4.850"
Big Block Chevy, 4.840"
Big Block Chevy, 4.900"
1 x Big Block Blank - make your own BB fixture.
Many more photos on request.
The owner is offering to run a cylinder head for you to show this machine's capability
TOOLING/TOOL HOLDERS:
These are NOT included in the machine price. Neither is the tooling cart. The TOOL HOLDERS, about 70 of them are offered though as a separate package. A few dozen collets that fit some of the tool holders are also for sale as a package or separately.
A local SPECIALIZED MACHINERY rigger is available with great pricing.
This machine including the CNC table and fixtures cost just under $200,00 when purchased in late 2006.
Spindle Run Time as of March 5th, 2008 was 161 hours
|
|
|
We found 5 matching ads. Now displaying the remaining 5 ads.
| FOR SALE: Year - Make - Mitutoyo Model - PH 350 |
|---|
| FOR SALE: Ad # 1497 , Year = , Make = Mitutoyo , Model = PH 350 |
|
|
Category: Comparators
|
Capacity: Mitutoyo Optical Comparitor
|
| Ad #
1497 |
| Year:
|
|
| Make:
| Mitutoyo
|
| Model:
| PH 350
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
GA
|
Country:
|
|
Price:
|
$sold USD
|
|
| General Description |
|
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Wilson Model - 3JR and 3JS |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 1446 , Year = , Make = Wilson , Model = 3JR and 3JS |
|
|
Category: Hardness Testers
|
Capacity: Wilson Hardness Testers, Direct & Superficial
|
| Ad #
1446 |
| Year:
|
|
| Make:
| Wilson
|
| Model:
| 3JR and 3JS
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
NC
|
Country:
|
|
Price:
|
$sold USD
|
|
| General Description |
- TWO DIFFERENT TYPES AVAILABLE:
1) Wilson DIRECT Reading Hardness Tester
2) Wilson SUPERFICIAL Reading Hardness Tester
Both have a 10" throat and come with a misc.
collection of anvil test blocks
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1985 Make - Sheffield Model - Cordex 72-A |
|---|
| FOR SALE: Ad # 1444 , Year = 1985 , Make = Sheffield , Model = Cordex 72-A |
|
|
Category: Coordinate Measuring Machine, (CMM)
|
Capacity: Large Swing Arm Type- CMM
|
| Ad #
1444 |
| Year:
| 1985
|
| Make:
| Sheffield
|
| Model:
| Cordex 72-A
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 1500Lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
SC
|
Country:
|
|
Price:
|
$Sold USD
|
|
| General Description |
- Measuring Height: 96"
Table: 60" x 48"
4 Axis DRO (X,Y,Z, and W)
Mounted on solid Cast Iron Table
|
| Electrical Description |
|
|
| Comments: |
|
|
|
|
| FOR SALE: Year - '97 ? Make - Parlec Model - 240 |
|---|
| FOR SALE: Ad # 1425 , Year = '97 ? , Make = Parlec , Model = 240 |
|
|
Category: Miscellaneous Inspection Equipment
|
Capacity: Parlec Model 240 with Projector
|
| Ad #
1425 |
| Year:
| '97 ?
|
| Make:
| Parlec
|
| Model:
| 240
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
|
Price:
|
$sold USD
|
|
| General Description |
- Control MP 1000
Set up with 30 Taper receptor but that can be changed/added to what you need
Projector/viewer (see photo)
Test Bar in original wooden box
Sits on granite base and cabinet (included)
Full documentation
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 97? Make - Parlec Model - 220 |
|---|
| FOR SALE: Ad # 1426 , Year = 97? , Make = Parlec , Model = 220 |
|
|
Category: Miscellaneous Inspection Equipment
|
Capacity: Parlec 220 Tool Presetter with Projector
|
| Ad #
1426 |
| Year:
| 97?
|
| Make:
| Parlec
|
| Model:
| 220
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
SC
|
Country:
|
|
Price:
|
$sold USD
|
|
| General Description |
- Control MP 500
Projector (as shown)
Presently setup with 30 Taper receptor but that can easily be changed/added
|
| Electrical Description |
|
|
|
|
We found 12 matching ads. Now displaying the remaining 12 ads.
| FOR SALE: Year - 1987 Make - Kent Model - PP Series |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 1523 , Year = 1987 , Make = Kent , Model = PP Series |
|
|
Category: Miscellaneous Plastic Accessories & Equipment
|
Capacity: Kent Pad Printer
|
| Ad #
1523 |
| Year:
| 1987
|
| Make:
| Kent
|
| Model:
| PP Series
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
|
Price:
|
$sold USD
|
|
| General Description |
- 15 PM
with burn tables etc
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1986/7 Make - Decorating Resource Model - Frisbee |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 1521 , Year = 1986/7 , Make = Decorating Resource , Model = Frisbee |
|
|
Category: Miscellaneous Plastic Accessories & Equipment
|
Capacity: Frisbee Hot Stamp Roll Machine
|
| Ad #
1521 |
| Year:
| 1986/7
|
| Make:
| Decorating Resource
|
| Model:
| Frisbee
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
|
Price:
|
$sold USD
|
|
| General Description |
|
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1992 Make - Electronic Liquid Fillers Model - CT 600 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 1522 , Year = 1992 , Make = Electronic Liquid Fillers , Model = CT 600 |
|
|
Category: Miscellaneous Plastic Accessories & Equipment
|
Capacity: E.L.I. Lidding Machine
|
| Ad #
1522 |
| Year:
| 1992
|
| Make:
| Electronic Liquid Fillers
|
| Model:
| CT 600
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
|
Price:
|
$sold USD
|
|
| General Description |
|
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Peligro Model - |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 1525 , Year = , Make = Peligro , Model = |
|
|
Category: Miscellaneous Plastic Accessories & Equipment
|
Capacity: Peligro Permanant Label Hot Stamp Roll-On Machine
|
| Ad #
1525 |
| Year:
|
|
| Make:
| Peligro
|
| Model:
|
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
|
Price:
|
$sold USD
|
|
| General Description |
- 18 PM
size: 5 x 10 label feed
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1994 Make - Label Air Model - 2114-M |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 1524 , Year = 1994 , Make = Label Air , Model = 2114-M |
|
|
Category: Miscellaneous Plastic Accessories & Equipment
|
Capacity: Label Air Machine
|
| Ad #
1524 |
| Year:
| 1994
|
| Make:
| Label Air
|
| Model:
| 2114-M
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
|
Price:
|
$sold USD
|
|
| General Description |
|
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1988 Make - Model - |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 1519 , Year = 1988 , Make = , Model = |
|
|
Category: Miscellaneous Plastic Accessories & Equipment
|
Capacity: Auto Roll Screen Print Press
|
| Ad #
1519 |
| Year:
| 1988
|
| Make:
|
|
| Model:
|
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
|
Price:
|
$sold USD
|
|
| General Description |
|
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1992 Make - STAMPRITE Model - |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 1526 , Year = 1992 , Make = STAMPRITE , Model = |
|
|
Category: Miscellaneous Plastic Accessories & Equipment
|
Capacity: STAMPRITE Hot Roll Machine
|
| Ad #
1526 |
| Year:
| 1992
|
| Make:
| STAMPRITE
|
| Model:
|
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
|
Price:
|
$sold USD
|
|
| General Description |
- 15 PM
size: 5 x 10 label feed
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1988 Make - Franklin Model - SPEC |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 1520 , Year = 1988 , Make = Franklin , Model = SPEC |
|
|
Category: Miscellaneous Plastic Accessories & Equipment
|
Capacity: Franklin 2 Head Hot Stamp Printing Machine
|
| Ad #
1520 |
| Year:
| 1988
|
| Make:
| Franklin
|
| Model:
| SPEC
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
|
Price:
|
$sold USD
|
|
| General Description |
|
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Van Dorn Model - 75 Ton |
|---|
| FOR SALE: Ad # 5028 , Year = , Make = Van Dorn , Model = 75 Ton |
|
|
Category: Injection Molding Machines
|
Capacity: 75 Ton Van Dorn Plastic Injection Molding MAchine
|
| Ad #
5028 |
| Year:
|
|
| Make:
| Van Dorn
|
| Model:
| 75 Ton
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Just Arrived!! More Details to follow
|
|
|
| FOR SALE: Year - 68/69 Make - Van Dorn Model - 125-RS-6 |
|---|
| FOR SALE: Ad # 4861 , Year = 68/69 , Make = Van Dorn , Model = 125-RS-6 |
|
|
Category: Injection Molding Machines
|
Capacity: Van Dorn 125 Ton, 6 oz Shot Toggle Clamp PIM
|
| Ad #
4861 |
| Year:
| 68/69
|
| Make:
| Van Dorn
|
| Model:
| 125-RS-6
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: | 7,000 lbs
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 4 x 2.5" diameter Tie Bars
Distance Between Tie Bars: 13 3/4" all ways
Shut Height: 4" min, 15" max
Controls:
ATC Solid State Timers
Barber Coleman Temperature Controls
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - SterlTronics Model - S64 12-A |
|---|
| FOR SALE: Ad # 1778 , Year = , Make = SterlTronics , Model = S64 12-A |
|
|
Category: Miscellaneous Plastic Accessories & Equipment
|
Capacity: Water Temp Control Units
|
| Ad #
1778 |
| Year:
|
|
| Make:
| SterlTronics
|
| Model:
| S64 12-A
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
|
Price:
|
$Sold USD
|
|
| General Description |
- Used mainly for Plastic Injection machine mold temp control
0 - 250F Control range
Heater 9 KW, 14 Amps
150 psi max
3 UNITS AVAILABLE
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - TrueBlood Model - A-30-3 |
|---|
| FOR SALE: Ad # 1775 , Year = , Make = TrueBlood , Model = A-30-3 |
|
|
Category: Injection Molding Machines
|
Capacity: Vertical Injection Shuttle Molding Machine
|
| Ad #
1775 |
| Year:
|
|
| Make:
| TrueBlood
|
| Model:
| A-30-3
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | Requires rigger
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
|
Price:
|
$Sold USD
|
|
| General Description |
- 30 ton,
3 oz machine with twin pallets
|
| Electrical Description |
|
|
| Comments: |
- Rear Heat, Middle Heat and Nose Heat temp. controls
|
|
|
We found 5 matching ads. Now displaying the remaining 5 ads.
| FOR SALE: Year - Make - Lucifer Model - 42-036 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 1450 , Year = , Make = Lucifer , Model = 42-036 |
|
|
Category: Heat Treat Ovens
|
Capacity: Lucifer 1,600 F Oven
|
| Ad #
1450 |
| Year:
|
|
| Make:
| Lucifer
|
| Model:
| 42-036
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | On showroom floor
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
NC
|
Country:
|
|
Price:
|
$sold USD
|
|
| General Description |
- 18"W x 18"H x 36"D
Max Temp 1,600F; 0-850 Deg C
Fully controlled Temp, alarm)
Chart Recorder
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Grieves Model - AB-850 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 1448 , Year = , Make = Grieves , Model = AB-850 |
|
|
Category: Heat Treat Ovens
|
Capacity: Grieves Heat Treat Oven - 850F
|
| Ad #
1448 |
| Year:
|
|
| Make:
| Grieves
|
| Model:
| AB-850
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | On showroom floor
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
NC
|
Country:
|
|
Price:
|
$sold USD
|
|
| General Description |
- Max Temp: 850 F
18kw
36" Square work area
Fully Controlled
36" x 36" x 36"
Used for burn off or tempering.
Has a exhuast blower
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Taylor-Winfield Model - MKU-5 |
|---|
| FOR SALE: Ad # 1447 , Year = , Make = Taylor-Winfield , Model = MKU-5 |
|
|
Category: Heat Treat Related Equipment-Misc.
|
Capacity: Induction Heater and Work(Brazing) Bench
|
| Ad #
1447 |
| Year:
|
|
| Make:
| Taylor-Winfield
|
| Model:
| MKU-5
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | On showroom floor
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
NC
|
Country:
|
|
Price:
|
$Sold USD
|
|
| General Description |
- 5 KW Induction Heater unit, 0-100 cal
600 - 1,400 F
Fully controlled with timer and Ircon non-contact optical pyrometer
|
| Electrical Description |
|
|
| Comments: |
- This is a complete system which includes:
1) Induction Heater and controls
2) Brazing Station/work bench with dual fume
extractors (built-in)
3) Ircon non-contact radiation thermometer
(optical pyrometer) for precise workpiece
temperature control
Last used for brazing silver compnents
|
|
|
| FOR SALE: Year - Nov 70 Make - Turbo Machine Company Model - FS-1200 |
|---|
| FOR SALE: Ad # 6559 , Year = Nov 70 , Make = Turbo Machine Company , Model = FS-1200 |
|
|
Category: Autoclaves / Sterilizing Chambers
|
Capacity: 66" x 150", 55 psi, 305F Turbo Machine, Autoclave
|
| Ad #
6559 |
| Year:
| Nov 70
|
| Make:
| Turbo Machine Company
|
| Model:
| FS-1200
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | 14' x 8' x 7' approx |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- National Board # 8323
Max Design Pressure: 55 & FV psi @ 305 F
Max. Design Temperature: 305 F & 55 & FV psi
Inspection Ins. EC in
Shell: 312 in
Head: 312 in
Radius of Diam: 66"
Length: 150"
|
| Comments: |
- TWO SIMILAR UNITS AVAILABLE - see ad # 6560
|
|
|
| FOR SALE: Year - 1974 Make - Turbo Macine Company Model - FS-1200 |
|---|
| FOR SALE: Ad # 6560 , Year = 1974 , Make = Turbo Macine Company , Model = FS-1200 |
|
|
Category: Autoclaves / Sterilizing Chambers
|
Capacity: 66" x 150", 55 psi, 305F Turbo Machine Autoclave
|
| Ad #
6560 |
| Year:
| 1974
|
| Make:
| Turbo Macine Company
|
| Model:
| FS-1200
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | 14' x 7' x 8' approx |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Max Working Pressure: 55 psi
Max Working Temp: 305F
National Board #: 1015-00
Dia" 66"
Length: 12" 6"
|
| Comments: |
- Has TWO units available. See ad # 6559 also
|
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
| FOR SALE: Year - 1997 Make - Portec Pathfinder Model - K7710K |
|---|
| FOR SALE: Ad # 1443 , Year = 1997 , Make = Portec Pathfinder , Model = K7710K |
|
|
Category: Forklifts / Lift Trucks (All Types)
|
Capacity: Electronic Wire Guided Tows - Almost New
|
| Ad #
1443 |
| Year:
| 1997
|
| Make:
| Portec Pathfinder
|
| Model:
| K7710K
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
SC
|
Country:
|
|
Price:
|
$sold USD
|
|
| General Description |
- Control Chief Type 464/A.
Reciever System 460
Operates at 433,92 MHz
Max Draw Bar Pull = 750 lbs
Rated Speed = 480 ft/min
Rated Load = 10,000 lbs
3 Available
Spare Battery Supplied with each tow
Battery Charger (EO Type, 24V) supplied with each tow
Designed for automatic (floor follow strip)or manual operation.
All automatic equipment included
|
| Electrical Description |
- Battery 24V - wire guided or manual drive.
|
| Comments: |
- Almost new condition. One has 400 hrs, one has less than 200 hrs and one has 6 hours on the run clock. Delivered to a plant that never started production. If these units where ever used, it was only in the installation mode.
Has 3 automatic units and 2 manual units available for sale!
Increadible buy
|
|
|
| FOR SALE: Year - Make - Strata Model - NRO 35AANL |
|---|
| FOR SALE: Ad # 1422 , Year = , Make = Strata , Model = NRO 35AANL |
|
|
Category: Forklifts / Lift Trucks (All Types)
|
Capacity: 3,550 lb Forklift AND Charger
|
| Ad #
1422 |
| Year:
|
|
| Make:
| Strata
|
| Model:
| NRO 35AANL
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 5,800
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
SC
|
Country:
|
|
Price:
|
$sold USD
|
|
| General Description |
- 3,500 lb Capacity
272" Fork Height
INCLUDES a Battery Charger
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - TOYOTA Model - FGC-45 |
|---|
| FOR SALE: Ad # 7667 , Year = , Make = TOYOTA , Model = FGC-45 |
|
|
Category: Forklifts / Lift Trucks (All Types)
|
Capacity: 10,000 lbs, LP Triple Mast TOYOTA Fork Lift Truck
|
| Ad #
7667 |
| Year:
|
|
| Make:
| TOYOTA
|
| Model:
| FGC-45
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Lift Capacity: 10,000 lbs
Triple Mast
Max. Lift Height: 184"
Fork Blades: 6' long
LP Powered
|
|
|
| FOR SALE: Year - 1999 Make - Cogan Model - Instant Lift IL-1000 |
|---|
| FOR SALE: Ad # 5972 , Year = 1999 , Make = Cogan , Model = Instant Lift IL-1000 |
|
|
Category: Cranes/Hoists & Manipulators
|
Capacity: 2,000 lb Cogan IL-1000 Vertical Reciprocating Frieght Elevator
|
| Ad #
5972 |
| Year:
| 1999
|
| Make:
| Cogan
|
| Model:
| Instant Lift IL-1000
|
| Condition:
| New
|
| Serial #:
| On Request
|
|
| Machine Status: | New, in crate
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- NEW!! STILL IN ORIGINAL PACKAGING!
Lift Capacity: 2,000 lbs
Cage Size: 60" x 60" x 84" H
Mezzanine Height: 12" 0" above ground
Total Depth: 97"
Speed: 16 fpm at 24" load center
Safety Features:
Falling Platform Device
Automatic Self Levelling at Upper Levels
Side Stabilizing Rollers
Mechanical Over-travel Stop Block
Security Cage Top and Bottom C/W Signage and
Doors are Electro-Mechanically Interlocked
All assembly drawings, operation and maintenance
documentation included
Color: Powder Painted Blue and Grey
|
| Electrical Description |
|
|
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| FOR SALE: Year - 2001(?) Make - Kleentec Model - PW 500AM |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 5971 , Year = 2001(?) , Make = Kleentec , Model = PW 500AM |
|
|
Category: Cleaning Equipment
|
Capacity: Top Loaded Agitating Heated-Die Washer
|
| Ad #
5971 |
| Year:
| 2001(?)
|
| Make:
| Kleentec
|
| Model:
| PW 500AM
|
| Condition:
| New
|
| Serial #:
| On Request
|
|
| Machine Status: | New, in crate
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Kleer-Flow Model PW 500AM (now owned by Kleentec and designated the PW 500 HSS)
Top Loaded - Opening is 24" x 54"
Capacity: 200 gallon
230-480v/3
Electric Heaters: 12 kW
Natural Gas Heater: 5", WC
We understand that the tank is stainless steel (need to confirm)
|
| Electrical Description |
|
|
| Comments: |
- BRAND NEW! Still in original packaging
New unit today would cost over $30,000.00
|
|
|
| FOR SALE: Year - 1997 Make - Alternate Energy Model - #WB-250 HVS |
|---|
| FOR SALE: Ad # 4762 , Year = 1997 , Make = Alternate Energy , Model = #WB-250 HVS |
|
|
Category: Painting / Coating Equipment
|
Capacity: LPG (Propane) Water Bath Vaporizer & Mixer
|
| Ad #
4762 |
| Year:
| 1997
|
| Make:
| Alternate Energy
|
| Model:
| #WB-250 HVS
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 1,300 lbs (est)
|
| Dimension: L x W x H | 9' x 5' x 7' High |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Capacity: 20 MBTU/hour
Dual Venturi Pipe System
MAWP: 250 psi @ 600 F
MDMT: 0 F @ 100 psi
Vaporizing Capacity: 250 GPM
W:
SH: 154
HD: 154
Burner BTU 300,000
Vapour Area: 19 sq ft - LP Gas
Mixture/Holding Tank Capacity: Est 80 - 100
galls
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1987 Make - Wheelabrator Model - LERC 4/20 Blast Machine |
|---|
| FOR SALE: Ad # 5795 , Year = 1987 , Make = Wheelabrator , Model = LERC 4/20 Blast Machine |
|
|
Category: Bead & Shot Blasters
|
Capacity: 22" x 40" x 15' Long 4 Wheel Pass Thru Shot Blaster w. Dust Extractor
|
| Ad #
5795 |
| Year:
| 1987
|
| Make:
| Wheelabrator
|
| Model:
| LERC 4/20 Blast Machine
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | Requires rigger
|
| Weight: |
|
| Dimension: L x W x H | 15' x 12' x 18'H Total |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Low Energy Blast Machine:
Part Entrance: 22" x 40"
Blast Chamber Length(Total): 15'
4 Wheel System
Elevator
Screw Conveyor
Dust Extractor Size: 4' x 5' x 5' H
Dust Extractor Type: MPF # 33
Electrical Controls for:
Ventilator
Screw Conveyor
Shot Controls
Elevator
Total Conected Load: 94 hp, 119 Amps @ 480V, 3 Phase.
|
| Electrical Description |
|
|
| Comments: |
- Presently mounted in an 18" deep pit.
Full documentation
Ideal for the cleaning of structural beams and other long, narrow components.
Works great and ready to go
Many more photos on request.
Facility has large cranes to load on to your truck but will still need riggers to disassemble the system
|
|
|
|
| Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 2002 Make - North State/LeNeave Model - TSC-10BL |
|---|
| FOR SALE: Ad # 6582 , Year = 2002 , Make = North State/LeNeave , Model = TSC-10BL |
|
|
Category: Saws
|
Capacity: 27" x 40" Tilt Type Table Arbor Saw With 10" Blade
|
| Ad #
6582 |
| Year:
| 2002
|
| Make:
| North State/LeNeave
|
| Model:
| TSC-10BL
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | Requires rigger
|
| Weight: | 380 lb
|
| Dimension: L x W x H | 7' x 5' x 3' (est) |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Table Size: 27" x 40" (with two "T" Slots)
Blade Size: 10" diameter
Drive Motor Power: 3 hp (brand new)
Tilt: 45 degrees
FACTORY SPECIFICATIONS: MODEL TSC10HB
Diameter of Arbor 5/8" (16mm)
Arbor Speed 4000 RPM
Motor 3 HP
Saw arbor diameter 5/8"
Max depth of cut at 90 deg.: --- 3"
Max depth of cut at 45 deg: -- 2-3/4"
Table size (extended): ---------- 40"
Table height from floor: -------- 34.1
Front guide rail size: ----------- 78"
Rear Guide rail size: ------------ 78"
Fence size: ------------------- 33.5" x 2.1"
|
| Electrical Description |
|
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - Make - SterlTronics Model - S64 12-A |
|---|
| FOR SALE: Ad # 1777 , Year = , Make = SterlTronics , Model = S64 12-A |
|
|
Category: Electrical Equipment (All Types)
|
Capacity: Water Temp Control Units
|
| Ad #
1777 |
| Year:
|
|
| Make:
| SterlTronics
|
| Model:
| S64 12-A
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
|
Price:
|
$Sold USD
|
|
| General Description |
- Used mainly for Plastic Injection machine mold temp control
0 - 250F Control range
Heater 9 KW, 14 Amps
150 psi max
3 UNITS AVAILABLE
|
| Electrical Description |
|
|
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
