| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 9001 | Manual: Hole / Turret Punches |
| — |
Diacro |
No. 12 |
Very Good |
sold |
Photo /
More Info. |
| manual "rotex type" turret punch: 12 Station Punch (Rotex Type)-
manual turret hole punch
4 ton force will do 1-1/2" hole in 16ga mtl
max hole/die size 1-3/4"?
Throat:12-1/2"
Punches:1/8,3/16,1/4,5/16,3/8,7/16,1/2,5/8,3/4,7/8
,1,1-1/2.
New paint, plating and polishing. Punches are
useable but need to be sharpened for a burr free
holes.
stand included
Great machine for small parts, race shop or
hobby shop.
was completely refurbished
manual included |
|
| Ad # 11783 | Manual: Hole / Turret Punches |
| — |
Rotex |
18-A |
Excellent |
sold |
Photo /
More Info. |
| 8 Ton: Completly Rebuilt 18 station Rotex with punches ranging in size from 5/32" ... |
|
| Ad # 14412 | Manual: Hole / Turret Punches |
| — |
Wiedemann |
R2 |
Good |
sold |
Photo /
More Info. |
| —: Manual Turret Punch (rotex type)
Make: Wiedemann Machine Co.
Model: R2
Capacity: 5 Ton, 12 Stations, 12" throat |
|
| Ad # 12825 | Manual: Hole / Turret Punches |
| — |
Roper Whitey |
No 16 No 20 |
Good |
sold |
Photo /
More Info. |
| 1/2" Hole max: Roper Whitney No 16 and No 20 Hand Punches
1/2" Hole in 1/4"
1/2" max hole size
2 similiar units available # 16 & # 20 |
|
| Ad # 12821 | Manual: Hole / Turret Punches |
| ? |
rotex |
15-L |
Good |
sold |
Photo /
More Info. |
| 12 station, 2: max hole , 8 ton force: used Rotex punch #15-L
8 ton force
2" Hole Max
12 Station
12" throat
no stand |
|
| Ad # 11610 | Manual: Hole / Turret Punches |
| — |
ROTEX |
18-B |
Excellent |
sold |
Photo /
More Info. |
| 8 Ton-2" cap: Rotex Punch 18 station
including a rare 2" shear. 24" deep throat
Rotex 18 Station Punch Presses
•2" capacity punch
•18" throat for punching to the center of a 36" sheet
•These punch presses are rated at 8 tons and are made of meehanite and have a 45,000 lb tensile strength
•Punches and dies are rotated independently
•Complete with all standard punches and dies 1/32"-2"
18 station
has been taken apart blasted & powered coated and reconditioned |
|
| Ad # 10683 | Manual: Hole / Turret Punches |
| — |
Rotex |
18 A |
Excellent |
sold |
Photo /
More Info. |
| 8 ton: 1/8" to 2" max: 18" throat: Completly Rebuilt 18 station Rotex with punches ranging in size from 1/8" t... |
|
| Ad # 9555 | Manual: Hole / Turret Punches |
| — |
Stimpson |
— |
Very Good |
sold |
Photo /
More Info. |
| Riviter: Stimpson foot-press Rivetors in good working condition. |
|
| Ad # 9543 | Manual: Hole / Turret Punches |
| — |
NAEF |
2161 |
Very Good |
Sold |
Photo /
More Info. |
| —: NAEF Model B No. 2161 |
|
| Ad # 10538 | Manual: Hole / Turret Punches |
| — |
Whitney metal tool co. |
Foot Press |
Good |
SOLD |
Photo /
More Info. |
| 5 tons: The front right corner of the throat plate is chipped. |
|
| Ad # 13403 | Manual: Hole / Turret Punches |
| — |
Rotex |
20C-3.50 |
Good |
sold |
Photo /
More Info. |
| 3.5 " max: Rotex 20C-3.50 manual hole punch
20C 3.5
Specifications:
20 stations
26" throat depth
3 1/2" maximum hole punching capacity
Rated at 15 tons
Alphabet indicators align the punch and die station
Tooling set includes: #30, #12, 7/32, 1/4, 9/32, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4, 7/8, 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2-1/2, 2-5/8, 3-1/28**
Totally redesigned turrets on our basic 18-C frame increases the punching capacity to 3-1/2" and 20 stations. This machine has been very popular in the automotive racing industry, aircraft facilities, shipyards and truck plants
As a result of over 75 years in manufacturing Turret Punch Presses, the Rotex Turret Punch Press is an efficient, versatile, and easily operated machine tool.
Compared with recognized methods of handling small quantity production and short run punching jobs, only a fraction of the time and labor is required when a Rotex Turret Punch is used. As a labor and time saver, Rotex Punch Presses are confidently recommended for a very wide range of applications.
For most job shops, a variety of punches must be quickly available. In order to utilize this added feature of irregular shaped punches, it is required that the machine be keyed to provide precision aligning of the dies and punches. This feature is standard on all models.
The Turrets rotate to the desired punching size instantly and lock into position. The dies and punches are accurately pre-aligned and self locking to insure maximum precision. A safety lock prevents damage to the work, punches, and dies, if the machine is properly aligned. Different sizes and shapes are available instantly with the rotating of the turrets. No time is lost in setting up. The machine is always ready to operate. Once installed, it is unnecessary to realign punches with dies. The turret and dies plate can be rotated independently thereby increasing the versatility of the machine. The stations on the punch turret and die plate are marked alphabetically. The punch holders or punches, and dies are marked according to size.
The "Quick Change" feature of the Rotex punch enables the operator to bring into punching position quickly and efficiently any of the sizes or shapes offered. Rotex offers a greater depth of throat, a greater selection of sizes and shapes, a larger maximum size, 3-1/2", all incorporated in one machine at one time and for less money than all other makes~ "It's a Tool Center."
Throat:26" throat depth. Will punch to the center of a 48" sheet of material with a fence being utilized.
Frame:Cast "Mehanite" or equivalent 60,000 PSI tensile or better for rugged operation.
Turret Rotation:Independent handle rotation is the standard configuration. Optional "Hand Synchronized" (HS) or "Hand Wheel Gear Synchronized" (HWGS) are also available.
Tonnage:Punch Presses are rated at approximately 13 tons with an average sized operator.
Tooling:Long wearing hardened steel, machined to close tolerances for efficient punching. Pre-aligned and ready for immediate use to insure maximum precision.
Station Indicators:Punch and Die turrets are alphabetically marked to simplify accurate and speedy alignment.
Safety Lock:Prevents damage to work and machine if the turrets are not properly locked in place.
Size Identification:Punch and die sizes are clearly marked for quick and proper identification.
roll around stand included as shown
Includes roll around stand shown..
new this unit sells new for 18K without stand... |
|
| Ad # 12336 | Manual: Hole / Turret Punches |
| — |
Pierce-All |
Perf0o-mator 30 25A |
Good |
sold |
Photo /
More Info. |
| 32" Throat 3 station: Pierce-All Per-o-mator
Model 30-25A
220/3 Volts
Manufacturer: Pierce-All
Capacity: 25-30 Tons
Max. Material Thickness: 1/4"
Strokes Per Minute: 140
Length Of Power Stroke: 5/8"
Throat Depth Forward of Backgauge: 30"
|
|
| Ad # 7605 | Manual: Hole / Turret Punches |
| — |
Strippit |
BN Units - Various |
Very Good |
SOLD |
Photo /
More Info. |
| Strippit BN and CJ Hand Punches (Various): 8-1/2" x 1-1/4" ---- 5 Units
8-1/2" x 1/4" --------7 Units
12" x 1-1/4" ---------3 Units
12" x 2-1/4" ---------2 Units
12" x 3" ------------3 Units
12" x 5" -------------1 Units
Also have one 8CJ x 1-3/8" Unit |
|
| Ad # 12111 | Manual: Hole / Turret Punches |
| — |
kidder |
248 |
Good |
sold |
Photo /
More Info. |
| 3-5 ton ?? 24" throat-hydraulic: kidder # 248
110v ac hyd unit included
24" throat
w stand
hyd actuated |
|
| Ad # 13178 | Manual: Hole / Turret Punches |
| — |
Whitey |
No 20 |
Good |
sold |
Photo /
More Info. |
| 20 Ton: Whitey Punch No 20
20 Ton
2" 1/4" Throat
1/2" Hole in 1/2" Mild Steel
|
|
| Ad # 9945 | Manual: Hole / Turret Punches |
| 95 ? |
DI-ACRO |
# 2 |
Excellent |
SOLD |
Photo /
More Info. |
| 2 Ton Punch - 1.5" Dia hole in 16Ga steel: This single station machine punches holes of various shapes and sizes up to... |
|
