Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 9674 | Initial Pinch & Pyramid Type Plate Bending Rolls |
2008 |
Modern |
R-0570H |
Demo Machine |
Sold |
Photo /
More Info. |
1/4" x 5' initial pich type: 60" x 1/4" cap
7" roll dia
5HP
foot pedal x 2 feeding
Hardly used and in NEW condition. Only 1 year old. |
|
Ad # 14669 | Initial Pinch & Pyramid Type Plate Bending Rolls |
2008 |
built-rite |
MP2.187 |
Excellent |
sold |
Photo /
More Info. |
24" x 3/16": New Dimensions/Built-rite initial pinch plate
rolls #MP2.187
Capacity" 24" x 3/16" rated at A36 60,00
tensile steel
3 driven rolls
5" roll dia
initial pinch type
very nice..like new
|
|
Ad # 9198 | Initial Pinch & Pyramid Type Plate Bending Rolls |
2004 |
Carell Corporation |
4RH-100 |
Excellent |
Sold |
Photo /
More Info. |
5' x 3/16" Double Initial Pinch Plate rolls: 5 ft x 3/16 plate rolls
6.7" roll dia
4 HP
Induction Hardened Rolls 54HRC
Nr. 2 LED Digital Displays
All 4 rolls groved to 1/2" depth on drop end side of machine for max. 10 Ga. flanges
these rolls have only a few prototpe parts run on them
|
|
Ad # 5642 | Initial Pinch & Pyramid Type Plate Bending Rolls |
2000 |
IMCAR |
4RH100, 4/2 |
Excellent |
Sold |
Photo /
More Info. |
5' x 3/16 4-Roll Hydraulic Double Initial Pinch Plate Bender: Working Length: 5'
Capacity: 3/16"
Central Roll Diameter: 6.7"
Lateral Roll Diameter: 5.9"
Total hp: 4 + 1
4RH100 Series are 4 roll, double initial pinch, full hydraulic plate bending machines. These units have independent hydraulic adjustment and inclination of both lateral bending rolls, hydraulic pinch roll adjustment with adjustable maximum pinch pressure, hydraulic drop end for rapid part removal and hydraulic powered rotation of the top roll and pinch roll using high efficiency hydraulic motors and planetary reduction units. Four roll plate rolls allow flat feeding of the sheet and eliminate wasteful pre-bending steps common to some other machine types. |
|
Ad # 13698 | Initial Pinch & Pyramid Type Plate Bending Rolls |
1956 |
Webb |
9L |
Fair |
Sold |
Photo /
More Info. |
8' 2" x 3/4" plate steel: Webb Initial Pinch Plate Bending Roll
Model: 9L
Capacity: 8'2" x 3/4" Plate Steel
Rolls: 3
Roll Diameter: 13"
220/440 3 Phase
HP: 20
machine was in good running condition when taken out of service-should just need a little cleaning up..
|
|
Ad # 3159 | Initial Pinch & Pyramid Type Plate Bending Rolls |
1959 |
Berch |
11-C |
Fair |
Sold |
Photo /
More Info. |
16' x 3/8" Bertch Intial Pinch Plate Roll: Capacity: 16' x 3/8"
Over All Length of Bending Roll: 16'
Bending Roll Diameter: 14"
Bending Capacity: 3/8" x 16'
Main Drive Motor: 20 HP
Rear Roll Adjusting Roll: 10 HP
Gear Motors: 1 HP
Equipped With:
Forward & Reverse Controller
Air Drop End
Power Rear Roll Adjustment
Power Front Roll Adjustment
|
|
Ad # 6576 | Initial Pinch & Pyramid Type Plate Bending Rolls |
|
Niagra |
|
Good |
SOLD |
Photo /
More Info. |
6 ft x 16GA: 6 ft rolls with x 16ga
4" diameter rolls |
|
Ad # 8310 | Initial Pinch & Pyramid Type Plate Bending Rolls |
|
Montgomery |
16862H |
Good |
sold |
Photo /
More Info. |
14ft x 5/8in MONTGOMERY PLATE BENDING ROLL, INITIAL PINCH: USED 14 FT. X 5/8" MONTGOMERY PLATE BENDING ROLL
Hydraulic
Initial Type
Capacity:4' x 5/8" Mild Steel
Roll Length:14'2"
Roll Diameter:17"
Pass Line:35"
Equipped With:
Hydraulic Drop End With Control
Freestanding Control For Operation
With Pushbuttons For Up-Down;
Open-Close & Toggle Switch For
Forward-Reverse
Emergency Stop Button
Hydraulic Adjustment Of Rolls With Control Centralized Oil Lubrication
Totally Enclosed Drive
Hydraulic Pump Driven By
50 HP 460 Volts 3 PH Motor
|
|
Ad # 5439 | Initial Pinch & Pyramid Type Plate Bending Rolls |
|
Wysong |
472PR |
Good |
Sold |
Photo /
More Info. |
72in x 16 ga Wysong Power Slip Rolls: Wysong Power Slip Rolls; Model 472PR; Capacity 16 ga. mild steel x 72" long... |
|
Ad # 6976 | Initial Pinch & Pyramid Type Plate Bending Rolls |
1951 |
BERTSCH |
30/25 |
Good |
sold |
Photo /
More Info. |
USED 10' X 2-1/4" BERTSCH MODEL 30/25 INITIAL PINCH PLATE BENDING ROLL: USED 10' X 2-1/4" BERTSCH MODEL 30/25 INITIAL PINCH PLATE BENDING ROLL
CAPACITY: 10' X 2-1/4" BOILER DUTY
10' X 1-3/4" PIPE DUTY
ROLL DIAMETER: 25"
LENGTH OF ROLLS: 10'2"
AIR DROP END
POWER ROLL ADJUSTMENT
MAIN DRIVE MOTOR: 125 HP |
|
Ad # 13958 | Initial Pinch & Pyramid Type Plate Bending Rolls |
1974 ? |
Bertsch |
# 14 |
Good |
sold |
Photo /
More Info. |
12' x 3/4" & 19/32" pipe duty: Bertsch Plate Bending Roll, Pyramid type
Model: #14, 15" x 12' heavy duty,
Initial
Pinch
Bending Roll
Capacity: 12' x 3/4" mild steel capacity
boiler
duty, 19/32" pipe duty
Rear roll geared, and lower rolls
grooved
longitudinally; floating hinge bearing;
Air
cylinder system for drop hinge operation,
complete
with valve lubricator; 12" dia. dial type
position
indicator for rear roll
Front and rear mounted emergency "stop"
tension
cables; Guards enclosing gears
Arranged for power adjustment to lower
front
pinch roll; Arranged for double motor
drive,
with
motors and controls mounted and wired.
Motors: for 230/3/60 characteristics:
30 HP, 1200 RPM, main: motor with
mounted
brake
and stepless control = #85438 (H)
15 HP, 1200 RPM, rear roll adj: motor
with
mounted brake and control = #85438(H)
(2) 1 HP, 900 RPM, flange-foot mounted
front
roll
adj: motors with special frames
Gear covers included (not pictured)
No pit is required except for the hinge
cylinder
unless the working height can be
tolerated.
Machine sold for $70,000 in 1974 |
|
Ad # 8315 | Initial Pinch & Pyramid Type Plate Bending Rolls |
|
Pexto |
2418E |
Good |
sold |
Photo /
More Info. |
4ft x 16-18 GAUGE PEXTO PLATE BENDING ROLL: USED 4' x 16-18 GAUGE PEXTO PLATE BENDING ROLL
Initial Type
Capacity:4' x 16-18 Ga. Mild Steel
Roll Diameter:3"
Roll Length:49"
Pass Line:43"
Speeds Approx:26 RPM
Equipped With:
Manual Drop End w/Hand Lever to Raise
Top Roll
Manual Rear Roll & Bottom Roll
Adjustment
Pushbuttons For Start - Stop
Longitudinal & Circular Grooves In
Rear Roll
Circular Grooves in Bottom Roll
Full Length Emergency Stop Treadle
.55 HP 1130 RPM 220/440/3/60 Motor
|
|
Ad # 13947 | Initial Pinch & Pyramid Type Plate Bending Rolls |
1991 |
Webb |
BR 608 |
Good |
sold |
Photo /
More Info. |
96"( 8ft) x 1/8" powered rolls: Webb Industries-powered initial Pinch rolls
metal bending rolls 1/8" X 96" capacity.
Roll Dia:6"
will roll:7" dia min in 12ga-3/16",with a 3/16" @12" dia,18" dia 3ft in 3/16"
roll speed: 16ft/min
capacity:96" x 12ga max, 1/4" x 25",3/16" 34",8ga x 52"
Machine can bend thicker metal based on width for example 1/4" X 5' can also be rolled.
Has power back roll and air powered drop end. machine is in excellent condition.
You can see it run and I can load |
|
Ad # 13271 | Initial Pinch & Pyramid Type Plate Bending Rolls |
1977?? |
Webb |
9L-1210 |
Good |
sold |
Photo /
More Info. |
10ft x 1/2" cap: Webb initial pinch rolls
10'-2" x 1/2" max capacity
12" dia roll
air drop
Three roll benders work by "pinching" the flat workpiece between two rolls and bending it as it comes in contact with a forming roll. This bends the workpiece into a cylindrical form, where it is welded together to produce a cylinder. Caps are then welded on to produce tanks.
The upper roll is in a fixed position, the lower roll has adjustable movement to perform the gripping function. These are the "pinch" rolls. The third roll (the forming roll) is also adjustable.
Truly built to do the job year after year, these machines are designed with all three rolls driven. This insures easy material feeding and constant pull through of the workpiece.
With a manually or air adjusted drop hinge, the top shaft is automatically raised to release the pressure on the rolled sheet when the tail hinge is lowered. The rear forming roll is adjusted manually on some standard models. Power adjustments can be furnished on all WEBB rear forming rolls.
Many objects we see everyday are manufactured by the metal bending industry. Water heaters, aircraft engine housings, and a variety of tanks and curved metal structures are common examples. For decades, Webb has been manufacturing the machines to do this work, both three-roll initial pinch rollers
Note: minor surface rust on rolls no major pitts |
|
Ad # 10454 | Initial Pinch & Pyramid Type Plate Bending Rolls |
1974 |
Bertsch |
MODEL #14 |
Good |
sold |
Photo /
More Info. |
1-1/8" x 3': Bertsch Initial Pinch Plate Bending Roll
MODEL #14 S/N #M-10210 NEW 1974
SPECIFICATIONS:
Bending Capacity 1 1/8" x 3'
Bending Roll Diameter 10"
Main Drive Motor 40 HP
Rear Roll Adjusting Motor 25 HP
Weight (approx) 37,100 lbs
Machine is equipped with:
* Operators Console Station
* Air Drop End
* Power Rear Roll Adjustment
* Power Front Roll Adjustment
|
|
Ad # 12152 | Initial Pinch & Pyramid Type Plate Bending Rolls |
|
|
|
Good |
sold |
Photo /
More Info. |
: 5 ft plate roll 10 ga |
|
Ad # 7430 | Initial Pinch & Pyramid Type Plate Bending Rolls |
|
KAUFMAN |
|
Good |
sold |
Photo /
More Info. |
6 FT. X 3/16" KAUFMAN ONE PASS 2-ROLL HYDRAULIC K-PRENE SHEET ROLLING: 6 FT. X 3/16" KAUFMAN ONE PASS 2-ROLL HYDRAULIC K-PRENE SHEET ROLLING & CUR... |
|
Ad # 8314 | Initial Pinch & Pyramid Type Plate Bending Rolls |
|
Rolshear |
PR4-36 |
Good |
Sold |
Photo /
More Info. |
3ft x 10 GAUGE ROLSHEAR PLATE BENDING ROLL, Initial Type: SED 3 FT. X 10 GAUGE ROLSHEAR PLATE BENDING ROLL
Initial Type
Capacity:3' x 10 Ga. Mild Steel
Roll Length:37-1/2"
Roll Diameter:4-1/4"
Pass Line:34"
Speeds Approximately:18 RPM
Equipped With:
Air Drop End With Control
Pushbuttons For Forward-Reverse- Stop
Key Selector Switch For Run-Safe- Jog
*Link-Lite Safety Curtain
Full Length Emergency Stop Treadle
Front & Back
Manual Bottom & Rear Roll Adjustment
2 HP 1725 RPM 230/460/3/60 Motor
|
|
Ad # 14142 | Initial Pinch & Pyramid Type Plate Bending Rolls |
2010 |
Durma |
HBR-4 3013 |
Good |
sold |
Photo /
More Info. |
1/2'' x 10'-0''-4 roll: 2010 DURMA HRB-4 #3013
4 Rolls 13mm x 3050mm Plate.
top roll 12" dia
hyd lift on end
1/4"-1/2" mtl fine to roll, may show issue
thinner mtl or aluminum,top roll is a little
warped , so thin mtl or alumium may have issue
thicker mtl no problem,new roller 8K
includes cone option
--std factory specs below-please verify
actual machine
10'2" max bending length
pre bend 3/8" in 1/2"
top roll 11.8"
bottom roll: 10.63 in
side rolls: 8.66"
max pass thru: 2"
20 HP
Bending length 3100 mm upper roll 300 mm
lower roll 270 mm side roll 220 mm 4 rolling
machine bending capacity 13 mm length machine 5310
mm wide machine 1660 mm height machine 1590 mm
Series Accessories synchronized CE standard for EU
control unit with digital display Cone bending
device for induction hardened rolls side roller
positioning electronically via PLC lower roll
firmly mechanically synchronized welding work on
the machine Machine body made of stress relieved
steel rollers in the guide rail mounted top roll
hydraulically foldable bottom and top rollers
hydraulic motor driven and planetary gear
Electrical and hydraulic protection against
overloads lower roller pressure hydraulically
adjustable optional oil cooler NC Control Unit
S530 *
Standard Specifications
• Control unit with 6 digital readouts
• Programmable multi-pass points
• Cone bending
• Hardened rolls (HRC 58)
• Highly durable forged 4140 alloy steel
rolls machined by CNC
Lathes with optimal crown (special crown
upon request)
• All rolls mounted on bearings
• Electronic control for side rolls
• Dual speed control
• Stress relieved steel construction
machine frame
• Hydraulic drop end with easy pull out
system
• Central rolls are driven with hydraulic
motor(s) and
planetary gear box(es)
• All rolls driven on machines with 1" pre-
bend and above
• Electrical and hydraulic protection
against overloads
• World standard electrical and hydraulic
components (parts
stocked by us or available off-the-shelf
from your local supplier)
• Hydraulic pressure adjustable bottom roll
(crowning compensation
Standard 4-Roll
Control with 6 Digital
Readouts on Touch
Screen Panel
with Multiple
Programmable
Pass Points
Standard Specifications
• Control unit with 6 digital readouts
• Programmable multi-pass points
• Cone bending
• Hardened rolls (HRC 58)
• Highly durable forged 4140 alloy steel
rolls machined by CNC
Lathes with optimal crown (special crown
upon request)
• All rolls mounted on bearings
• Electronic control for side rolls
• Dual speed control
• Stress relieved steel construction
machine frame
• Hydraulic drop end with easy pull out
system
• Central rolls are driven with hydraulic
motor(s) and
planetary gear box(es)
• All rolls driven on machines with 1" pre-
bend and above
• Electrical and hydraulic protection
against overloads
• World standard electrical and hydraulic
components (parts
stocked by us or available off-the-shelf
from your local supplier)
• Hydraulic pressure adjustable bottom roll
(crowning compensation |
|
Ad # 9152 | Initial Pinch & Pyramid Type Plate Bending Rolls |
|
Steco |
IP4 |
Good |
sold |
Photo /
More Info. |
6 ft x 1/4inch capacity: 6' x 1/4" STECO PLATE BENDING ROLL
IP4 Type; Initial type
Capacity: 6' x 1/4" mild steel
Roll length: 73"
Roll diameter: 7-1/2"
Pass line: 32"
EQUIPPED WITH: Manual drop end with hand crank to
raise top roll
Power rear roll adjustment with
control
Manual bottom roll adjustment
Pushbuttons for forward-reverse-off
Full length emergency stop treadle
front & back
2 HP 1440 RPM 380/420/3/50
Rear roll adjustment motor
7-1/2 HP 940 RPM 380/420/3/50
Main motor
Weight approx. 6200#
Overall dimensions approx. 129" L-R x 47" F-B x 46" H
Serial No. N/A
|
|
Ad # 11686 | Initial Pinch & Pyramid Type Plate Bending Rolls |
|
|
|
Good |
sold |
Photo /
More Info. |
8ft: pyramid type ..w all three rollers driven |
|
Ad # 10158 | Initial Pinch & Pyramid Type Plate Bending Rolls |
|
Hendley&Whittemor |
|
Good |
Sold |
Photo /
More Info. |
1/4" x 6' Initial Pinch: 1/4"
6ft capacity
Runs good. |
|
Ad # 13940 | Initial Pinch & Pyramid Type Plate Bending Rolls |
1980 |
Bertsch |
#11 |
Good |
sold |
Photo /
More Info. |
10' x 1/2" thick: Bertsch Plate Bending Rolls
Model: #11
Capacity: 10' x 1/2" ; 26" x 1"
Diameter of rolls: 14"
Heavy duty, Initial Pinch type bending
roll, Grade A-285 steel capacity, 11/16" x
10'
to 96" and larger dia. in "one pass" boiler
duty, 19/32" x 10' to 15 1/2" dia. in "one
pass" pipe duty, built with: Rear roll
geared,
lower rolls grooved longitudinally approx.
3'
on each side; Floating hinge bearing; 0" to
approx. 2" pinch opening; Air cylinder
system
for drop hinge operation; Guards enclosing
gears; Centralized, Farval grease
lubrication
system; Front and rear emergency "stop"
tension
cables; Arranged for double motor drive,
with
motors and controls mounted and wired
Electrical:460/3 phase
25 HP main motor
15 HP rear roll adjusting motor
(2) 3/4 HP squirrel cage motors
No pit is required except for the hinge
cylinder unless the working height can be
tolerated.
List Price of machine in 1980,
$95,750.00 |
|
Ad # 8313 | Initial Pinch & Pyramid Type Plate Bending Rolls |
|
WYSONG |
B-48 |
Good |
Sold |
Photo /
More Info. |
4ft x 12-14 GAUGE WYSONG PLATE BENDING ROLL, Initial Pinch: USED 4 FT. x 12-14 GAUGE WYSONG PLATE BENDING ROLL
Initial Type
Capacity:4' x 12-14 Ga. Mild Steel
Roll Diameter:4-1/4"
Roll Length:50"
Pass Line:28"
Speeds Approx:18 FPM
Equipped With:
Manual Drop End w/Automatic Balance Bar
Manual Rear Roll Adjustment Via
Handwheel
Manual Bottom Roll Adjustment
Pushbuttons for Forward-Reverse- Stop
Full Length Emergency Stop Treadle
Longitudinal & Circular Grooves In
Rear & Bottom Rolls
1-1/2 HP 1800 RPM 220/440/3/60 Motor
|
|
Ad # 8311 | Initial Pinch & Pyramid Type Plate Bending Rolls |
|
Bertsch |
7 |
Good |
sold |
Photo /
More Info. |
10ft x 3/16in BERTSCH PLATE BENDING ROLL: USED 10 FT. X 3/16" BERTSCH PLATE BENDING ROLL
Initial Type
3-Roll Gear Drive
Capacity:
10' x 3/16" Mild Steel
10' x 10 Ga. Stainless Steel
Roll Length:10'4"
Roll Diameter:7-1/2"
Pass Line:30"
Speeds Approx.;20 FPM
EQUIPPED WITH:
Air Drop End w/Control & Automatic
Balance Bar
Power Rear Roll Adjustment With
Pushbutton Control
Manual Bottom Roll Adjustment With
Position Indicators
Drum Switch For Forward-Off-Reverse
Full Length Emergency Stop Bar
Pushbuttons For Start - Stop
Longitudinal Grooves in Rear & Bottom Rolls
3 HP 1155 RPM 3/60 Rear Roll
Adjustment Motor
7-1/2 HP 1130 RPM 3 Phase 60 Cycle
Main Motor
Overall Dimensions: Pit Required)
|
|
Ad # 8312 | Initial Pinch & Pyramid Type Plate Bending Rolls |
|
Hendley & Whittemore |
2-D |
Good |
Sold |
Photo /
More Info. |
5ft x 11 GAUGE PLATE BENDING ROLL, INITIAL PINCH: USED 5 FT. x 11 GAUGE HENDLEY & WHITTEMORE PLATE BENDING ROLL
Initial Type
Capacity:5' x 11 Ga. Mild Steel
Roll Length:62"
Roll Diameter:4-3/4"
Pass Line:34"
Equipped With:
Manual Drop End With Lever To Raise
Top Roll
Manual Bottom Roll Adjustment Via
Hand Wheels
Manual Rear Roll Adjustment Via
Hand Lever
Pushbuttons For Forward-Reverse-Stop
Full Length Emergency Stop Treadle
5 HP 1800 RPM 220/440/3/60 Motor
|
|
Ad # 5844 | Initial Pinch & Pyramid Type Plate Bending Rolls |
|
Hendley Whitmore |
20 Gauge x 98in |
Good |
Sold |
Photo /
More Info. |
20 Gauge x 98" Initial Pinch Plate Rolls: Capacity 20 Gauge x 98" Mild Steel
Roll Diameter 3½"
Power Required 208/220/440 Volt, 3 Phase
Equipped With: Manual Drop End
Manual Adjustment
Reverse and Forward Control
Foot Pedal |
|
Ad # 11786 | Initial Pinch & Pyramid Type Plate Bending Rolls |
1997 |
montgomery |
|
Good |
sold |
Photo /
More Info. |
72" x 10 ga: 72" x 10GA
very low hours.
rolls are 6 ft. long and 4 7/16 dia.it has a 7.5 hp motor.price is neg.machine was running when unpluged. |
|
Ad # 6639 | Initial Pinch & Pyramid Type Plate Bending Rolls |
1999 |
METAL FORM |
3/8 |
Very Good |
sold |
Photo /
More Info. |
3/8" x 120" Hydraulic Plate Bending Roll: 3/8" x 120" Hydraulic Plate Bending Roll
Specifications:
Hydraulic Initial Pinch Plate Rolls
Equipped With:
HYDRAULIC DROP END
REMOTE PEDISTAL MOUNTED CONTROL
hyd. roll adjustment
IN PLANT |
|
Ad # 9931 | Initial Pinch & Pyramid Type Plate Bending Rolls |
1989 |
Bertsch |
3/8 cap.x 77" |
Very Good |
sold |
No Photo /
More Info. |
3/8 plate.steel x 77" long. Hyd.: Double inital,7 1/2 dai.top roll,air drop end.Older
CNC controler,roll around pedestal console.
Max.cap. 3/8 plate x 77" long. |
|
Ad # 1743 | Initial Pinch & Pyramid Type Plate Bending Rolls |
1995 |
Round O/Comec |
PS - 255 |
Very Good |
Sold |
Photo /
More Info. |
ROUND- 0 PYRAMID ROLLER 8ft x 9/16in cap: 9/16" x 8' Capacity
Hydraulic
Independent Powers Rolls
Independent Roll Set
Cone roll Attachment with 10" Rollers
Angle Roll Attachment
|
|
Ad # 6977 | Initial Pinch & Pyramid Type Plate Bending Rolls |
1956 |
BERTSCH |
14 |
Very Good |
Sold |
Photo /
More Info. |
USED 12' X 3/4" BERTSCH MODEL 14 INITIAL PINCH PLATE BENDING ROLL: USED 12' X 3/4" BERTSCH MODEL 14 INITIAL PINCH PLATE BENDING ROLL
CAPACITY: 12' X 3/4" BOILER DUTY
12' X 5/8" PIPE DUTY
ROLL DIAMETER: 15"
LENGTH OF ROLLS: 12'2"
AIR DROP END
MOTORS: 30 HP MAIN DRIVE
15 HP REAR ROLL ADJUSTMENT
(2) 2 HP WEDGE ADJUSTMENT
NOTE - THIS PLATE ROLL WAS NOT USED IN
PRODUCTION WORK, ONLY MAINTENANCE WORK.
NEW ELECTRICS INCLUDING JOYSTICK CONTROL,
MOTOR BRAKE, AND MAGNETICS WERE UPDATED
BY BERTSCH IN 1994.
>From Maintenance Shop, very little use. |
|
Ad # 6640 | Initial Pinch & Pyramid Type Plate Bending Rolls |
|
WEBB |
9L Mechanical |
Very Good |
SOLD |
Photo /
More Info. |
12' x 1/2" Webb Model 9L Mechanical: 12' x 1/2" Webb Model 9L Mechanical
OVERHAULED 1996
Specifications:
Capacity - 1/2" x 12' MS
Length Of Roll - 146"
Roll Diameter - 13"
Rolling Speed - 7-14 FPM
Motors - 20 & 10 HP
Equipped With:
REAR POWER ADJUSTING ROLL
AIR DROP END |
|