New & Used Fabrication Equipment, Roll Formers / Bending Rolls

You are viewing a list of sold machinery in the NetMachinery Sold Archive. If you are looking for available machinery click View Machinery for sale

Home > Sold Machinery Archive > Roll Formers / Bending Rolls > Initial Pinch & Pyramid Type Plate Bending Rolls

We found 33 matching ads. Now displaying the remaining 33 ads.

(Tip: Click on the column headers to sort your results by that criteria)

Year	Make	Model	Condition	Price	Details

Ad # 6576		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	Niagra	—	Good	SOLD	Photo / More Info.
6 ft x 16GA: 6 ft rolls with x 16ga 4" diameter rolls

Ad # 8310		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	Montgomery	16862H	Good	sold	Photo / More Info.
14ft x 5/8in MONTGOMERY PLATE BENDING ROLL, INITIAL PINCH: USED 14 FT. X 5/8" MONTGOMERY PLATE BENDING ROLL Hydraulic Initial Type Capacity:4' x 5/8" Mild Steel Roll Length:14'2" Roll Diameter:17" Pass Line:35" Equipped With: Hydraulic Drop End With Control Freestanding Control For Operation With Pushbuttons For Up-Down; Open-Close & Toggle Switch For Forward-Reverse Emergency Stop Button Hydraulic Adjustment Of Rolls With Control Centralized Oil Lubrication Totally Enclosed Drive Hydraulic Pump Driven By 50 HP 460 Volts 3 PH Motor

Ad # 5439		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	Wysong	472PR	Good	Sold	Photo / More Info.
72in x 16 ga Wysong Power Slip Rolls: Wysong Power Slip Rolls; Model 472PR; Capacity 16 ga. mild steel x 72" long...

Ad # 8315		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	Pexto	2418E	Good	sold	Photo / More Info.
4ft x 16-18 GAUGE PEXTO PLATE BENDING ROLL: USED 4' x 16-18 GAUGE PEXTO PLATE BENDING ROLL Initial Type Capacity:4' x 16-18 Ga. Mild Steel Roll Diameter:3" Roll Length:49" Pass Line:43" Speeds Approx:26 RPM Equipped With: Manual Drop End w/Hand Lever to Raise Top Roll Manual Rear Roll & Bottom Roll Adjustment Pushbuttons For Start - Stop Longitudinal & Circular Grooves In Rear Roll Circular Grooves in Bottom Roll Full Length Emergency Stop Treadle .55 HP 1130 RPM 220/440/3/60 Motor

Ad # 12152		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	—	—	Good	sold	Photo / More Info.
—: 5 ft plate roll 10 ga

Ad # 7430		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	KAUFMAN	—	Good	sold	Photo / More Info.
6 FT. X 3/16" KAUFMAN ONE PASS 2-ROLL HYDRAULIC K-PRENE SHEET ROLLING: 6 FT. X 3/16" KAUFMAN ONE PASS 2-ROLL HYDRAULIC K-PRENE SHEET ROLLING & CUR...

Ad # 8314		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	Rolshear	PR4-36	Good	Sold	Photo / More Info.
3ft x 10 GAUGE ROLSHEAR PLATE BENDING ROLL, Initial Type: SED 3 FT. X 10 GAUGE ROLSHEAR PLATE BENDING ROLL Initial Type Capacity:3' x 10 Ga. Mild Steel Roll Length:37-1/2" Roll Diameter:4-1/4" Pass Line:34" Speeds Approximately:18 RPM Equipped With: Air Drop End With Control Pushbuttons For Forward-Reverse- Stop Key Selector Switch For Run-Safe- Jog *Link-Lite Safety Curtain Full Length Emergency Stop Treadle Front & Back Manual Bottom & Rear Roll Adjustment 2 HP 1725 RPM 230/460/3/60 Motor

Ad # 9152		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	Steco	IP4	Good	sold	Photo / More Info.
6 ft x 1/4inch capacity: 6' x 1/4" STECO PLATE BENDING ROLL IP4 Type; Initial type Capacity: 6' x 1/4" mild steel Roll length: 73" Roll diameter: 7-1/2" Pass line: 32" EQUIPPED WITH: Manual drop end with hand crank to raise top roll Power rear roll adjustment with control Manual bottom roll adjustment Pushbuttons for forward-reverse-off Full length emergency stop treadle front & back 2 HP 1440 RPM 380/420/3/50 Rear roll adjustment motor 7-1/2 HP 940 RPM 380/420/3/50 Main motor Weight approx. 6200# Overall dimensions approx. 129" L-R x 47" F-B x 46" H Serial No. N/A

Ad # 11686		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	—	—	Good	sold	Photo / More Info.
8ft: pyramid type ..w all three rollers driven

Ad # 10158		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	Hendley&Whittemor	—	Good	Sold	Photo / More Info.
1/4" x 6' Initial Pinch: 1/4" 6ft capacity Runs good.

Ad # 8313		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	WYSONG	B-48	Good	Sold	Photo / More Info.
4ft x 12-14 GAUGE WYSONG PLATE BENDING ROLL, Initial Pinch: USED 4 FT. x 12-14 GAUGE WYSONG PLATE BENDING ROLL Initial Type Capacity:4' x 12-14 Ga. Mild Steel Roll Diameter:4-1/4" Roll Length:50" Pass Line:28" Speeds Approx:18 FPM Equipped With: Manual Drop End w/Automatic Balance Bar Manual Rear Roll Adjustment Via Handwheel Manual Bottom Roll Adjustment Pushbuttons for Forward-Reverse- Stop Full Length Emergency Stop Treadle Longitudinal & Circular Grooves In Rear & Bottom Rolls 1-1/2 HP 1800 RPM 220/440/3/60 Motor

Ad # 8311		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	Bertsch	7	Good	sold	Photo / More Info.
10ft x 3/16in BERTSCH PLATE BENDING ROLL: USED 10 FT. X 3/16" BERTSCH PLATE BENDING ROLL Initial Type 3-Roll Gear Drive Capacity: 10' x 3/16" Mild Steel 10' x 10 Ga. Stainless Steel Roll Length:10'4" Roll Diameter:7-1/2" Pass Line:30" Speeds Approx.;20 FPM EQUIPPED WITH: Air Drop End w/Control & Automatic Balance Bar Power Rear Roll Adjustment With Pushbutton Control Manual Bottom Roll Adjustment With Position Indicators Drum Switch For Forward-Off-Reverse Full Length Emergency Stop Bar Pushbuttons For Start - Stop Longitudinal Grooves in Rear & Bottom Rolls 3 HP 1155 RPM 3/60 Rear Roll Adjustment Motor 7-1/2 HP 1130 RPM 3 Phase 60 Cycle Main Motor Overall Dimensions: Pit Required)

Ad # 8312		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	Hendley & Whittemore	2-D	Good	Sold	Photo / More Info.
5ft x 11 GAUGE PLATE BENDING ROLL, INITIAL PINCH: USED 5 FT. x 11 GAUGE HENDLEY & WHITTEMORE PLATE BENDING ROLL Initial Type Capacity:5' x 11 Ga. Mild Steel Roll Length:62" Roll Diameter:4-3/4" Pass Line:34" Equipped With: Manual Drop End With Lever To Raise Top Roll Manual Bottom Roll Adjustment Via Hand Wheels Manual Rear Roll Adjustment Via Hand Lever Pushbuttons For Forward-Reverse-Stop Full Length Emergency Stop Treadle 5 HP 1800 RPM 220/440/3/60 Motor

Ad # 5844		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	Hendley Whitmore	20 Gauge x 98in	Good	Sold	Photo / More Info.
20 Gauge x 98" Initial Pinch Plate Rolls: Capacity 20 Gauge x 98" Mild Steel Roll Diameter 3½" Power Required 208/220/440 Volt, 3 Phase Equipped With: Manual Drop End Manual Adjustment Reverse and Forward Control Foot Pedal

Ad # 6640		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
—	WEBB	9L Mechanical	Very Good	SOLD	Photo / More Info.
12' x 1/2" Webb Model 9L Mechanical: 12' x 1/2" Webb Model 9L Mechanical OVERHAULED 1996 Specifications: Capacity - 1/2" x 12' MS Length Of Roll - 146" Roll Diameter - 13" Rolling Speed - 7-14 FPM Motors - 20 & 10 HP Equipped With: REAR POWER ADJUSTING ROLL AIR DROP END

Ad # 6976		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
1951	BERTSCH	30/25	Good	sold	Photo / More Info.
USED 10' X 2-1/4" BERTSCH MODEL 30/25 INITIAL PINCH PLATE BENDING ROLL: USED 10' X 2-1/4" BERTSCH MODEL 30/25 INITIAL PINCH PLATE BENDING ROLL CAPACITY: 10' X 2-1/4" BOILER DUTY 10' X 1-3/4" PIPE DUTY ROLL DIAMETER: 25" LENGTH OF ROLLS: 10'2" AIR DROP END POWER ROLL ADJUSTMENT MAIN DRIVE MOTOR: 125 HP

Ad # 13698		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
1956	Webb	9L	Fair	Sold	Photo / More Info.
8' 2" x 3/4" plate steel: Webb Initial Pinch Plate Bending Roll Model: 9L Capacity: 8'2" x 3/4" Plate Steel Rolls: 3 Roll Diameter: 13" 220/440 3 Phase HP: 20 machine was in good running condition when taken out of service-should just need a little cleaning up..

Ad # 6977		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
1956	BERTSCH	14	Very Good	Sold	Photo / More Info.
USED 12' X 3/4" BERTSCH MODEL 14 INITIAL PINCH PLATE BENDING ROLL: USED 12' X 3/4" BERTSCH MODEL 14 INITIAL PINCH PLATE BENDING ROLL CAPACITY: 12' X 3/4" BOILER DUTY 12' X 5/8" PIPE DUTY ROLL DIAMETER: 15" LENGTH OF ROLLS: 12'2" AIR DROP END MOTORS: 30 HP MAIN DRIVE 15 HP REAR ROLL ADJUSTMENT (2) 2 HP WEDGE ADJUSTMENT NOTE - THIS PLATE ROLL WAS NOT USED IN PRODUCTION WORK, ONLY MAINTENANCE WORK. NEW ELECTRICS INCLUDING JOYSTICK CONTROL, MOTOR BRAKE, AND MAGNETICS WERE UPDATED BY BERTSCH IN 1994. >From Maintenance Shop, very little use.

Ad # 3159		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
1959	Berch	11-C	Fair	Sold	Photo / More Info.
16' x 3/8" Bertch Intial Pinch Plate Roll: Capacity: 16' x 3/8" Over All Length of Bending Roll: 16' Bending Roll Diameter: 14" Bending Capacity: 3/8" x 16' Main Drive Motor: 20 HP Rear Roll Adjusting Roll: 10 HP Gear Motors: 1 HP Equipped With: Forward & Reverse Controller Air Drop End Power Rear Roll Adjustment Power Front Roll Adjustment

Ad # 13958		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
1974 ?	Bertsch	# 14	Good	sold	Photo / More Info.
12' x 3/4" & 19/32" pipe duty: Bertsch Plate Bending Roll, Pyramid type Model: #14, 15" x 12' heavy duty, Initial Pinch Bending Roll Capacity: 12' x 3/4" mild steel capacity boiler duty, 19/32" pipe duty Rear roll geared, and lower rolls grooved longitudinally; floating hinge bearing; Air cylinder system for drop hinge operation, complete with valve lubricator; 12" dia. dial type position indicator for rear roll Front and rear mounted emergency "stop" tension cables; Guards enclosing gears Arranged for power adjustment to lower front pinch roll; Arranged for double motor drive, with motors and controls mounted and wired. Motors: for 230/3/60 characteristics: 30 HP, 1200 RPM, main: motor with mounted brake and stepless control = #85438 (H) 15 HP, 1200 RPM, rear roll adj: motor with mounted brake and control = #85438(H) (2) 1 HP, 900 RPM, flange-foot mounted front roll adj: motors with special frames Gear covers included (not pictured) No pit is required except for the hinge cylinder unless the working height can be tolerated. Machine sold for $70,000 in 1974

Ad # 10454		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
1974	Bertsch	MODEL #14	Good	sold	Photo / More Info.
1-1/8" x 3': Bertsch Initial Pinch Plate Bending Roll MODEL #14 S/N #M-10210 NEW 1974 SPECIFICATIONS: Bending Capacity 1 1/8" x 3' Bending Roll Diameter 10" Main Drive Motor 40 HP Rear Roll Adjusting Motor 25 HP Weight (approx) 37,100 lbs Machine is equipped with: * Operators Console Station * Air Drop End * Power Rear Roll Adjustment * Power Front Roll Adjustment

Ad # 13271		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
1977??	Webb	9L-1210	Good	sold	Photo / More Info.
10ft x 1/2" cap: Webb initial pinch rolls 10'-2" x 1/2" max capacity 12" dia roll air drop Three roll benders work by "pinching" the flat workpiece between two rolls and bending it as it comes in contact with a forming roll. This bends the workpiece into a cylindrical form, where it is welded together to produce a cylinder. Caps are then welded on to produce tanks. The upper roll is in a fixed position, the lower roll has adjustable movement to perform the gripping function. These are the "pinch" rolls. The third roll (the forming roll) is also adjustable. Truly built to do the job year after year, these machines are designed with all three rolls driven. This insures easy material feeding and constant pull through of the workpiece. With a manually or air adjusted drop hinge, the top shaft is automatically raised to release the pressure on the rolled sheet when the tail hinge is lowered. The rear forming roll is adjusted manually on some standard models. Power adjustments can be furnished on all WEBB rear forming rolls. Many objects we see everyday are manufactured by the metal bending industry. Water heaters, aircraft engine housings, and a variety of tanks and curved metal structures are common examples. For decades, Webb has been manufacturing the machines to do this work, both three-roll initial pinch rollers Note: minor surface rust on rolls no major pitts

Ad # 13940		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
1980	Bertsch	#11	Good	sold	Photo / More Info.
10' x 1/2" thick: Bertsch Plate Bending Rolls Model: #11 Capacity: 10' x 1/2" ; 26" x 1" Diameter of rolls: 14" Heavy duty, Initial Pinch type bending roll, Grade A-285 steel capacity, 11/16" x 10' to 96" and larger dia. in "one pass" boiler duty, 19/32" x 10' to 15 1/2" dia. in "one pass" pipe duty, built with: Rear roll geared, lower rolls grooved longitudinally approx. 3' on each side; Floating hinge bearing; 0" to approx. 2" pinch opening; Air cylinder system for drop hinge operation; Guards enclosing gears; Centralized, Farval grease lubrication system; Front and rear emergency "stop" tension cables; Arranged for double motor drive, with motors and controls mounted and wired Electrical:460/3 phase 25 HP main motor 15 HP rear roll adjusting motor (2) 3/4 HP squirrel cage motors No pit is required except for the hinge cylinder unless the working height can be tolerated. List Price of machine in 1980, $95,750.00

Ad # 9931		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
1989	Bertsch	3/8 cap.x 77"	Very Good	sold	No Photo / More Info.
3/8 plate.steel x 77" long. Hyd.: Double inital,7 1/2 dai.top roll,air drop end.Older CNC controler,roll around pedestal console. Max.cap. 3/8 plate x 77" long.

Ad # 13947		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
1991	Webb	BR 608	Good	sold	Photo / More Info.
96"( 8ft) x 1/8" powered rolls: Webb Industries-powered initial Pinch rolls metal bending rolls 1/8" X 96" capacity. Roll Dia:6" will roll:7" dia min in 12ga-3/16",with a 3/16" @12" dia,18" dia 3ft in 3/16" roll speed: 16ft/min capacity:96" x 12ga max, 1/4" x 25",3/16" 34",8ga x 52" Machine can bend thicker metal based on width for example 1/4" X 5' can also be rolled. Has power back roll and air powered drop end. machine is in excellent condition. You can see it run and I can load

Ad # 1743		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
1995	Round O/Comec	PS - 255	Very Good	Sold	Photo / More Info.
ROUND- 0 PYRAMID ROLLER 8ft x 9/16in cap: 9/16" x 8' Capacity Hydraulic Independent Powers Rolls Independent Roll Set Cone roll Attachment with 10" Rollers Angle Roll Attachment

Ad # 11786		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
1997	montgomery	—	Good	sold	Photo / More Info.
72" x 10 ga: 72" x 10GA very low hours. rolls are 6 ft. long and 4 7/16 dia.it has a 7.5 hp motor.price is neg.machine was running when unpluged.

Ad # 6639		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
1999	METAL FORM	3/8	Very Good	sold	Photo / More Info.
3/8" x 120" Hydraulic Plate Bending Roll: 3/8" x 120" Hydraulic Plate Bending Roll Specifications: Hydraulic Initial Pinch Plate Rolls Equipped With: HYDRAULIC DROP END REMOTE PEDISTAL MOUNTED CONTROL hyd. roll adjustment IN PLANT

Ad # 5642		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
2000	IMCAR	4RH100, 4/2	Excellent	Sold	Photo / More Info.
5' x 3/16 4-Roll Hydraulic Double Initial Pinch Plate Bender: Working Length: 5' Capacity: 3/16" Central Roll Diameter: 6.7" Lateral Roll Diameter: 5.9" Total hp: 4 + 1 4RH100 Series are 4 roll, double initial pinch, full hydraulic plate bending machines. These units have independent hydraulic adjustment and inclination of both lateral bending rolls, hydraulic pinch roll adjustment with adjustable maximum pinch pressure, hydraulic drop end for rapid part removal and hydraulic powered rotation of the top roll and pinch roll using high efficiency hydraulic motors and planetary reduction units. Four roll plate rolls allow flat feeding of the sheet and eliminate wasteful pre-bending steps common to some other machine types.

Ad # 9198		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
2004	Carell Corporation	4RH-100	Excellent	Sold	Photo / More Info.
5' x 3/16" Double Initial Pinch Plate rolls: 5 ft x 3/16 plate rolls 6.7" roll dia 4 HP Induction Hardened Rolls 54HRC Nr. 2 LED Digital Displays All 4 rolls groved to 1/2" depth on drop end side of machine for max. 10 Ga. flanges these rolls have only a few prototpe parts run on them

Ad # 14669		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
2008	built-rite	MP2.187	Excellent	sold	Photo / More Info.
24" x 3/16": New Dimensions/Built-rite initial pinch plate rolls #MP2.187 Capacity" 24" x 3/16" rated at A36 60,00 tensile steel 3 driven rolls 5" roll dia initial pinch type very nice..like new

Ad # 9674		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
2008	Modern	R-0570H	Demo Machine	Sold	Photo / More Info.
1/4" x 5' initial pich type: 60" x 1/4" cap 7" roll dia 5HP foot pedal x 2 feeding Hardly used and in NEW condition. Only 1 year old.

Ad # 14142		Initial Pinch & Pyramid Type Plate Bending Rolls		Ad to Checklist
2010	Durma	HBR-4 3013	Good	sold	Photo / More Info.
1/2'' x 10'-0''-4 roll: 2010 DURMA HRB-4 #3013 4 Rolls 13mm x 3050mm Plate. top roll 12" dia hyd lift on end 1/4"-1/2" mtl fine to roll, may show issue thinner mtl or aluminum,top roll is a little warped , so thin mtl or alumium may have issue thicker mtl no problem,new roller 8K includes cone option --std factory specs below-please verify actual machine 10'2" max bending length pre bend 3/8" in 1/2" top roll 11.8" bottom roll: 10.63 in side rolls: 8.66" max pass thru: 2" 20 HP Bending length 3100 mm upper roll 300 mm lower roll 270 mm side roll 220 mm 4 rolling machine bending capacity 13 mm length machine 5310 mm wide machine 1660 mm height machine 1590 mm Series Accessories synchronized CE standard for EU control unit with digital display Cone bending device for induction hardened rolls side roller positioning electronically via PLC lower roll firmly mechanically synchronized welding work on the machine Machine body made of stress relieved steel rollers in the guide rail mounted top roll hydraulically foldable bottom and top rollers hydraulic motor driven and planetary gear Electrical and hydraulic protection against overloads lower roller pressure hydraulically adjustable optional oil cooler NC Control Unit S530 * Standard Specifications • Control unit with 6 digital readouts • Programmable multi-pass points • Cone bending • Hardened rolls (HRC 58) • Highly durable forged 4140 alloy steel rolls machined by CNC Lathes with optimal crown (special crown upon request) • All rolls mounted on bearings • Electronic control for side rolls • Dual speed control • Stress relieved steel construction machine frame • Hydraulic drop end with easy pull out system • Central rolls are driven with hydraulic motor(s) and planetary gear box(es) • All rolls driven on machines with 1" pre- bend and above • Electrical and hydraulic protection against overloads • World standard electrical and hydraulic components (parts stocked by us or available off-the-shelf from your local supplier) • Hydraulic pressure adjustable bottom roll (crowning compensation Standard 4-Roll Control with 6 Digital Readouts on Touch Screen Panel with Multiple Programmable Pass Points Standard Specifications • Control unit with 6 digital readouts • Programmable multi-pass points • Cone bending • Hardened rolls (HRC 58) • Highly durable forged 4140 alloy steel rolls machined by CNC Lathes with optimal crown (special crown upon request) • All rolls mounted on bearings • Electronic control for side rolls • Dual speed control • Stress relieved steel construction machine frame • Hydraulic drop end with easy pull out system • Central rolls are driven with hydraulic motor(s) and planetary gear box(es) • All rolls driven on machines with 1" pre- bend and above • Electrical and hydraulic protection against overloads • World standard electrical and hydraulic components (parts stocked by us or available off-the-shelf from your local supplier) • Hydraulic pressure adjustable bottom roll (crowning compensation