Manual Lathes

You are viewing a list of sold machinery in the NetMachinery Sold Archive. If you are looking for available machinery click View Machinery for sale

Home > Sold Machinery Archive > Manual Lathes > Heavy Duty Large Lathe 24in. & over swing

We found 96 matching ads. Now displaying ads.1 to 75.

(Tip: Click on the column headers to sort your results by that criteria)

Year	Make	Model	Condition	Price	Details

Ad # 13366		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	Swift	19/21 C	Good	sold	Photo / More Info.
40" swing x 23ft centers: Swift Model 19/21 C-gap frame bed 4 - 230 RPM 40"swing x 23ft centers 32" swing over crosslide 4" Spindle Bore inch threading only 4 Jaw 64" Chuck 20" Dia max Steady Rest

Ad # 6517		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	LeBlond	LeBlond Model 25"	Good	Sold	Photo / More Info.
25" x 25' Heavy Duty LeBlond Engine Lathe: Swing: 25" Distance Between Centers: 25' (maybe a little more?) Spindle Bore; 3" Spindle Speeds: 5.5 rpm tp 625 rpm in 3 ranges Inch Threading 18" 3-Jaw Chuck Tailstock 4 Steady Rests - different sizes

Ad # 9415		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	TOS	SN71C	Good	sold	Photo / More Info.
28"/40" x 157": Hole thru spindle 2.8" Swing over bed ways, rated 27" Swing over bed ways, actual 28" Swing thru gap 40" Swing over cross-slide 16.5" Distance between centers 157" Gap length 11.8" Tailstock, spindle travel 9.4" Tailstock, spindle taper #5 MT (16) Spindle speeds, range 10-1000 rpm Carriage longitudinal feeds 001-.251 ipr Cross-Slide cross feeds 009-.125 ipr Acu-Rite Digital Readouts Removable Gap-Type Bed 12" 3-Jaw Chuck w/Jaws Hardened & Ground Bed Ways Inch-Metric Threading (2) Steady Rests Power Rapid Traverse

Ad # 11580		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	Lodge & Shiply	32"	Needs Work	sold	Photo / More Info.
32"swing x 48"bed: Lodge & Shipley 32" 32" x 48" 3 Jaw 32" chuck 2" 1/2 Spindle Bore Crossfeed rate 0.200 Power tailstock Rapid Advance

Ad # 14819		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
unknown	Lodge & Shipley	24"	Good	sold	Photo / More Info.
24" x 16': Lodge & Shipley 24" manual lathe Swing over bed: 27 1/2" Swing over cross slide: 19" Hole through Spindle: 2 1/2" center distance :16ft Morse Taper: No. 6 Number of spindle speeds: 12 Number of thread and feed changes: 65 Lead Screw Dia: 2 3/8" HP: 15-20-25 1200 RPM

Ad # 12930		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	LeBlond Regal Sliding Gap	—	Good	sold	Photo / More Info.
25"swing x 9ft: LeBlond Regal Sliding Gap Bed 25" - 50" x 9' 8.5" - 15' 5" S# 5H434, 25" Swing, 50" Swing in gap, Sliding Gap Bed, 9' 8.5" Bed length, 15' 5" Open, 12 Spindle speeds from 18 to 720 rpm, 48 Threading ranges from 2 to 112, 2 1/8" Thru hole, 12" 3 Jaw Cushman chuck, 30" Face plate, 2 axis Anilam Wizard Lathe Series DRO, Taper attachment, Quick change tool post, Hydraulic Hydra-Trace compound, 2 Roller bearing steady rest - 12.5" thru hole & 7.25" thru hole, 10hp 230/460v 3ph 60cyc, Cleaned & painted

Ad # 5818		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	NOBLE & LUND	106in x 27ft Lathe	Good	SOLD	Photo / More Info.
106" X 27' NOBLE & LUND HEAVY DUTY ENGINE LATHE: SWING OVER BED: 106" SWING OVER CROSS SLIDE: 90" DISTANCE BETWEEN CENTERS: 27' SPINDLE SPEEDS: .72 TO 42.5 RPM SLIDING FEEDS: .0037 TO .1666 IPR SURFACING FEEDS: 1/2 OF SLIDING FEEDS WIDTH OF 4-WAY BED: 88" MOTOR & CONTROLS: AC EQUIPPED WITH: 96" 4-JAW CHUCK CLAMP TYPE TOOL POST (1) CARRIAGE WITH 4-WAY RAPID TRAVERSE (1) 3-POINT STEADY REST (24" OPENING) (1) 4-POINT STEADY REST (24" OPENING) WINDOW TYPE HEADSTOCK THIS MACHINE HAS NO LEADSCREW OR THREADING CAPABILITY.

Ad # 10269		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	Sculfurt	34 x 216	Fair	Sold	Photo / More Info.
34in swing x 18ft centers: 34" swing over bed, 24" over cross slide 216" centers 4 jaw- 32" chuck 4" spindle bore 5MT in tailstock std. 4way tool post 2 steady rests coolant lead screw needs re-installed-minor work--use vari-speed drive system spindle:800rpm max30 HP

Ad # 14355		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	Lelbond	32"	Excellent	sold	Photo / More Info.
32 x 204" lathe: LEBLOND 32" x 204" Lathe 32" chuck w/4 independent jaws, 2 steady rests, 25 H.P. Motor Max rpm: 255 24.5' long overall

Ad # 1544		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
NEW	Lansing	Lansing G 43" x 120"	New	SOLD	Photo / More Info.
20 3/4" Bore LANSING ‘G’ Semi-Automatic Oil Country Lathe: Swing Over Bed: 43" DBC: 120" Swing In Gap 58” Swing Over Cross Slide 33” Length of Gap 20” Width of Bed 29 ½” Spindle Bore 20 ¾” Spindle Nose A1-28 Number of Speed Steps 3 Range of Spindle Speeds 0 – 177rpm Tool Retractor Slide Travel 1 ¼” Compound Slide Travel 14 ½” Cross Slide (width x travel) 13 ½” x 25” STEADY REST 3 Roller Jaws – Capacity 5” – 23” FEEDS Number of Longitudinal & Cross Feeds 40 Range of Longitudinal Feeds .004” - .064” Range of Cross & Compound Feeds .003” - .053” Rapid – Longitudinal 60”/min. Rapid – Cross Slide 30”/min. Rapid – Compound Slide 30”/min. THREADS 40 Metric Threads .5 – 7.5 160 Inch Threads (TPI) Standard 60-4 120 – 1 40 Module Threads .25 – 3.75 40 Diametral Threads 120 – 8 TAILSTOCK Quill Diameter 6” Morse Taper M.T. #6 Quill Travel 14” TAPER ATTACHMENT Length of Travel 25 ½” Amount of Taper Offset ±3 ½” / Ft. MOTORS Spindle 60 HP / DC

Ad # 13615		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	Nebel Lathe	Gap Bed	Good	sold	Photo / More Info.
52" x 72"centers: Nebel Sliding gap Lathe 52" Swing in Gap 48" Between the Sliding gap 30" Over crosslide 72" between centers Gap Closed 44" Face Plate with VTL Jaws Moorse Taper Number 6 on Tail Stock Tamper attachment 3" 1/8" Spindle Bore 5-230 RPM

Ad # 10716		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	Putnam	LH-3-8170	Good	Sold	Photo / More Info.
46" swing over bed,34" over cross slide x 6ft centers: 46" swing over bed ways, 34" over cross slide spindle speeds: 3.84-192 RPM (18) speed 4 way std. toolpost taper attachment 36" 4 jaw chuck 6 ft between centers 5MT tailstock 17" steady rest 2" spindle bore 25HP

Ad # 6478		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	AMERICAN	#20D ´´PACEMAKER´´	Very Good	SOLD	Photo / More Info.
25´´ X 126´´ AMERICAN ENGINE LATHE: 25´´ X 126´´ AMERICAN ENGINE LATHE: SWING OVER BED (ACTUAL) ...... 25´´ SWING OVER CROSS SLIDE ....... 16´´ DISTANCE BETWEEN CENTERS ..... 126´´ SPINDLE SPEEDS ............... (27) 15 TO 1000 RPM FEEDS ........................ (66) .0015 TO .0913 IPR THREADS ...................... (66) 2 TO 120 TPI LEADS ........................ (66) .0083 TO .5000 LPI HOLE THRU SPINDLE ............ 2´´ HARDENED REPLACEABLE WAYS .... YES TAPER ATTACHMENT ............. YES THREAD DIAL .................. YES FULL LENGTH CHIP PAN ......... YES COOLANT ...................... YES MICROMETER CARRIAGE STOP ..... YES CHUCK ........................ 18´´ 4-JAW CHUCK MOTOR ........................ 10 HORSEPOWER SPINDLE MOTOR

Ad # 11384		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	Greaves Klusman	—	Good	sold	Photo / More Info.
40" x 100" : 40" Swing Over Bed 100" Center Distance 32 inch 4 Jaw chuck 2" Spindle Hole 28-200 RPM?

Ad # 8803		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	Granor	24 x 132	Good	SOLD	Photo / More Info.
24 x 11 ft: 24" swing over ways , 16" over cross slide large gap in bed swings 42" x 12" wide 20" 4 jaw chuck taper attachment steady rest 3-1/2" spindle bore 9-450 RPm

Ad # 12234		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	American	24	Good	sold	Photo / More Info.
24" swing x 17ft: American 24" 24" swing x 17 ftcenters 11-450 RPM 16" x over cross slide 2" 1/4 Spindle Bore Power Rapid traverse on carriage 21" 4 Jaw Chuck Steady Rest Voltage 440/ 3 Phase

Ad # 12314		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	American Pacemaker	20 x 96	Good	sold	Photo / More Info.
24" x 96" : American Pacemaker 24" x 96" 18-1200 RPM Steady Rest 10" Voltage 220 20 Hp 2" 1/8 Spindle Bore 3 Jaw 18" chuck 15" Swing Over the Crosslide Taper Attachment

Ad # 13788		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	axelson	—	Excellent	sold	Photo / More Info.
32" X 432": AXELSON 32" X 432" LATHE s/n: 1715 32" swing 34.5" max swing 42' bed 432" centers 25 hp motor 28" chuck 4 steady rests Tailstock MACHINE IS CURRENTLY DISMANTLED INTO 2 PIECES STEADY RESTS AND CHUCK HAVE BEEN REMOVED AND SKIDDED

Ad # 14612		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	Best & miles	50" x 90"	Fair	sold	Photo / More Info.
50"swing x 90" centers: Best & Miles manual lathe capacity: 50" swing over ways center distance: 90" 20" steady rest tailstock 20HP 220/3 note: has not been used in years but ran when last used...

Ad # 8910		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	Summit	42 x 20ft	Good	SOLD	Photo / More Info.
42in x 20ft: SUMMIT ENGINE LATHE Description 42 " x 20ft 1 used - Summit Engine Lathe Serial # 10068 #6 Morris taper in tail stock 40" wide Hardened and Ground bedway Coolant and trays Follow rest 220/440 3 phase 5 to 800 RPM 39" 4-Jaw Chuck 2' Gap 42" swing over ways 56" swing thru gap 6 1/4" spindle hole 20' Centers Rapid travels Taper 4 way tool post 27" Steady rest Cuts in: Whitworth, Metric, Modulus, Diametric

Ad # 14628		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
?	Niles	52" x 12'	Good	sold	Photo / More Info.
52" swing x 12' centers: Niles Engine Lathe capacity:52" swing over bed ways ,42" over cross slide x 12ft center distance 48" 3 jaw chuck 30HP main motor steadyrest

Ad # 14144		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	Axelson	38"	Good	sold	Photo / More Info.
38": Axelson 38" Lathe

Ad # 12092		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	Leblond	12" x 36" Engine Lathe	—	sold	Photo / More Info.
—: Leblond 12" x 36" engine lathe, S/N 7C2351

Ad # 8805		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	Reed & Prentice	24 x 84"	Good	SOLD	Photo / More Info.
24 x 7 ft: 24" swing over ways, 14 over cross slide 7ft between centers approx 18" 4 jaw chuck 2-1/2" spindle bore 12-530 rpm

Ad # 6477		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	AXELSON	25in x 102" Engine	Very Good	sold	Photo / More Info.
25´´ X 102´´ AXELSON ENGINE LATHE: 25´´ X 102´´ AXELSON ENGINE LATHE: SWING OVER WAYS .............. 28-1/2´´ SWING OVER CROSS SLIDE ....... 18-1/2´´ DISTANCE BETWEEN CENTERS ..... 102´´ SPINDLE SPEEDS ............... (24) 6 TO 555 RPM FEEDS ........................ (90) .004 TO .300 IPR THREADS ...................... (45) 1 TO 30 TPI DIAMETER OF SPINDLE HOLES .... 2 3/8´´ TAPER ATTACHMENT THREAD DIAL CARRIAGE STOP COOLANT W/CHIP PAN 20 HORSEPOWER MAIN MOTOR

Ad # 7912		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	Bridgeford	32 x 196	Good	Sold	Photo / More Info.
32" x 196" Heavy Duty American Lathe: Swing Over Gap: 32" Swing Over Bed: 34" Bed Width: 21" Chuck: 23" diam., 4-Jaw Hand Cranked Tailstock Steady Rest Spindle Speeds: 6.5 - 166 rpm in 9 stages Inch Threading (Left hand and Right hand)

Ad # 6479		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	LEBLOND	2516	Very Good	SOLD	Photo / More Info.
25´´ X 192´´ (16') LEBLOND ENGINE LATHE: 25´´ X 192´´ (16') LEBLOND ENGINE LATHE: SWING OVER BED ................. 25´´ SWING OVER CROSS SLIDE ......... 16´´ DISTANCE BETWEEN CENTERS ....... 198´´ (16'6´´) SPINDLE SPEEDS ................. (27) 12 TO 1500 RPM FEEDS .......................... (120) .0011 TO .205 IPR THREADS ........................ 1 TO 60 TPI HOLE THRU SPINDLE .............. 2´´ 4-JAW CHUCK .................... YES RAPID TRAVERSE ................. YES FULL LENGTH CHIP PAN ........... YES COOLANT ........................ YES TAPER ATTACHMENT ............... YES HARDENED REPLACEABLE WAYS ...... YES STEADY REST .................... 16´´ 3-POINT ROLLER THREAD CHASING DIAL ............ YES MOTOR .......................... 20 HORSEPOWER SPINDLE MOTOR

Ad # 5597		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	LeBLOND	45 x 80 HD Lathe	Good	SOLD	Photo / More Info.
45" X 180" LEBLOND HEAVY DUTY ENGINE LATHE: MAXIMUM SWING OVER BED: 45" MAXIMUM SWING OVER CROSS SLIDE: 28-1/2" DISTANCE BETWEEN CENTERS: 180" SPINDLE SPEEDS: (27) 1.5 TO 165 RPM SPINDLE HOLE: 3-1/4" FEEDS: (54) .005" TO .308" THREADS: (54) 1/2 TO 30 TPI CROSS SLIDE TRAVEL: 27-1/2" COMPOUND REST TRAVEL: 15" TAILSTOCK SPINDLE TRAVEL: 20" TAILSTOCK SPINDLE TAPER: NO. 6 MT WIDTH OF BED: 42" MOTOR: 40 HP EQUIPPED WITH: 44" FACEPLATE W/4 BORING MILL JAWS TAPER ATTACHMENT HARDWAYS (2) STEADY REST TAILSTOCK THREAD DIAL

Ad # 5178		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	Oelikon	DMI	Good	sold	Photo / More Info.
Swiss Built 24" x 108" Gap Bed Lathe: Oelikon Swiss Built 24" x 108" Gap Bed Lathe Swing: 24" centers 108" Swing Over Cross Slides: 18" Inch + Metric Threading Spindle Bore: 1-1/2" Spindle Speeds: 40 - 1,000 rpm Coolant note: no tailstock

Ad # 4747		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	NARDINI	SZ-2560	Very Good	SOLD	Photo / More Info.
NARDINI SUPER SERVICE SZ-2560 LATHE: 25-5/8" SWING OVER BED 60" BETWEEN CENTERS 33-7/8" SWING IN GAP 3-1/8" SPINDLE HOLE 19-1500 RPM SPINDLE SPEEDS EQUIPPED WITH: STEADY REST MICRO CARRIAGE STOP COOLANT AND SPLASH SHIELDS ENGLISH/METRIC 2-SPEED MOTOR 3-JAW CHUCK

Ad # 10270		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	Niles	30 x 264	Good	Sold	Photo / More Info.
30" swing x 264 " bed: 30" swing ober bed ways, 28" swing over crosslide bed 22ft length centers 264" 4 jaw -36" chuck 2 steady rests 30 HP 37-394 rpm QC toolpost

Ad # 2731		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	Leblond	Regal	Very Good	Sold	Photo / More Info.
Leblond Lathe 26" swing x 12' centers: 26" swing over ways, 10" over cross slide 12' center distance 17.5" 4-jaw chuck 2" spindle bore Inch threads 8" steady rest Coolant QC Aloris toolpost - 3 holders Live center & misc tooling included

Ad # 4752		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	Axelson	20 x 120"	Very Good	SOLD	Photo / More Info.
22 -1/2" swing x 120" centers: MAXIMUM SWING 22-1/2" BED 14'overall length SPINDLE 2-3/16" SPINDLE RPM 9.5 - 961 RPM TPI 1-1/2 - 92 FPI .003 - .185 TURNING DIAMETER .16 - 20.1

Ad # 10273		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	Leblond	Regal 24	Good	Sold	Photo / More Info.
26" swing x 13ft centers-2 available: 26" swing over bed, 20" over cross slide 16" 4 jaw chuck Spindle bore: 2" inch threads taper attachment 13 ft centers=156" toolpost coolant rpm: 27-1080 20 HP 2 machines alike available

Ad # 6480		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
—	TOS	55B-71B	Good	sold	Photo / More Info.
26´´ X 86´´ TOS GAP BED ENGINE LATHE: 26´´ X 86´´ TOS GAP BED ENGINE LATHE: SWING OVER WAYS ..................... 26´´ SWING OVER CROSS SLIDE .............. 14´´ DISTANCE BETWEEN CENTERS ............ 86´´ SWING IN GAP ........................ 36´´ LENGHT OF GAP ....................... 16-1/2´´ SPINDLE SPEEDS ...................... (16) 10 TO 1000 RPM LONGITUDINAL FEEDS .................. (38) 0.002 TO 0.0311 IPR CROSS FEEDS ......................... (38) .0005 TO 0.028 IPR THREADS ............................. (38) 2 TO 72 TPI METRIC THREADS ...................... (38) .2 TO 4 MM PITCH DIAMETER OF SPINDLE HOLE ............ 3´´ THREAD DIAL ......................... YES SPINDLE FORWARD AND REVERSE ......... YES HARD WAYS ........................... YES MOTOR ............................... 7.5 HORSEPOWER

Ad # 5633		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
50's	LeBlond	25 x 72	Very Good	Sold	Photo / More Info.
25" x 72" Leblond Heavy Duty Engine Lathe: 2 1/4 spindle bore 25" x 72" capacity Manual, no gap 32" Max swing over bed - 20" over cross slide 72" centers Rapid traverse 16" 3 jaw chuck face pictures 4 way toolpost no gap in bed.. tapper attachment 5-600RPM english threads only 30 HP

Ad # 7913		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
50's	AMERICAN	42in Raised	Good	Sold	Photo / More Info.
50" x 120" Raised (11") American Heavy Duty Lathe: Swing Over Bed: 50", swing over cross slide: 36" Distance Across Ways: 32" Distance Between Centers: 120" Center Raised By 11" 48" Diam. 4-Jaw Chuck without jaws but spacing is 6 inch between vertical parallel slots. Spindle Speed Ranges:1- 157 rpm in 18 Stages Inch Threading Powered compound & cross feed Heavy Duty Steadyrest Headstock & tailstock raised to match up HP-40

Ad # 4792		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
50?	American	24"	Fair	Sold	Photo / More Info.
Heavy duty 36" swing x 72" centers lathe: 36" swing over ways, 16" over crosslide 72" center dist. 24" 4-jaw chuck steady rest 11-450 RPM taper attachment 20HP Inch threading

Ad # 16158		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
90s ?	Poreba	TPK 90A1/3M	Good	sold	Photo / More Info.
36"swing x 120"centers: Poreba # TPK 90A1/3M Lathe: Std. Mfg specs below-please verify actual machines.. 36"swing x 120"centers 24" Dia 6 jaw chuck shown and few other Acc.not shown in pix..steady rest,chuck? DRO-2 axis included Std. Mfg specs below SPECIFICATIONS: SWING OVER BED: 36 1/2" (927 mm) SWING OVER CROSS SLIDE: 25" SWING IN GAP: 49" LENGTH OF GAP: 17" DISTANCE BETWEEN CENTER: 120" (3048 mm) SPINDLE BORE: 3 3/4" SPINDLE NOSE: A1-11 SPINDLE MOTOR: 20/30 HP SPINDLE SPEEDS (2 RANGES): 7.1-710 RPM FEEDS - LONG. (122): .0043-.5 IPM - CROSS (122): .0021-.25 IPM - TOP SLIDE: .001-.125 IPM THREADING - INCH 1/4-30 TPI - METRIC: 1-120 MM/REV CROSS SLIDE TRAVEL: 18 1/2" TOP SLIDE TRAVEL: 11 3/4" RAPID TRAVERSE - LONG./CROSS: 260/130 IPM - TOP SLIDE: 65 IPM TAILSTOCK - DRILLING, DIAMETER: 5 1/8" - DRILLING LENGTH: 40" - TAPER: #6 MT - TRAVEL: 11 3/4" ELECTRICS: 440V/3Ph/60hZ

Ad # 15600		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
199?	Longem	LG26120C	Good	sold	Photo / More Info.
26" swing x 120" centers: Longem 26 x 120" manual gap bed lathe #LG26120 swing over bed 26",over crosslide:15.5" D1-8 camlock spindle inch/metric threading 10 hp main motor center dist:120" spindlle bore:4-1/8" taper attachment steady rest: up to 12" max spindle rpm:13-1600rpm:24speeds swing in gap:34" chucks: 3 jaw 16" dia,4 jaw 20" dia note:no tooling nor tool post not included,rapid traverse on bed needs new engage switch

Ad # 11376		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1940s	American tool Works	24"	Good	sold	Photo / More Info.
24" x 50" : American Tool Works 24" Heavy duty Lathe 24" x 50" 18" 4 Jaw Chuck Swing 27" 1/2" Over bed 17" over Carriage Range of threads per inch 1/2 to 28 15 - 280 RPM Taper Attachment Spindle Hole Diameter 2 1/8 Centers Morse Tape No.5 Steady rest capacity 9" 220/3phase

Ad # 9799		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1941	Monarch	—	Very Good	SOLD	Photo / More Info.
28" swing over cross x 276" centers: 28" swing over cross slide ? swing over ways 276" between centers double carrige (3) steady rests tail stock 2 in. spindle hole 6-300 rpm 4 way tool post 4-jaw chuck

Ad # 7202		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1942	AXELSON	24 H.D.	Good	Sold	Photo / More Info.
28" x 120"cc AXELSON Heavy Duty Engine Lathe, Model 24 H.D.: 28" x 120"cc AXELSON Heavy Duty Engine Lathe, Model 24 H.D. Max. swing over bedways: 28 3/4" Max. swing over cross slide: 18 3/4" Bed width: 26" Hole through spindle: 2 5/16" Spindle nose: 11" D-1 Travel of cross slide: 16 3/4" Tailstock spindle diameter: 41/2" Size of centers: No.5 M.T. 24 spindle speeds 6 to 555 RPM 81 feeds .004 to .300 IPR Thread range: 1 to 30 T.P.I EQUIPPED WITH: Swivel compound Camlock spindle nose 4-jaw chuck 14 3/4" Dia. capcity 3-point roller steady rest Plain follow rest Micrometer carriage stop (2) Boring holders w/(1) boring bar Pan bed with coolant tank ( less pump) Work light 20 H.P. 3/60/220 Volt Motor

Ad # 15508		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1942	Niles Tool Works	A 12-3	Good	sold	Photo / More Info.
56" swing over bed x 276" between centers: Niles Tool Works Engine Lathe Capacity: 54" Swing x 276" between centers Specifications: Swing Over Bed: 54" swing over cross slide:44" Distance Between Centers:276" Spindle Speeds: (12) 3.94 - 232 RPM Motor (Est.):50 HP Equipped With: 36" 4-Jaw Chuck (3) Steady Rests Tool Post 10" Riser Block Pendant Control Can be seen under power.

Ad # 11954		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1942	Monarch	—	Good	sold	Photo / More Info.
24.5" swing x 48" between centers: Monarch Engine Lathe, serial #15309 24.5" swing x 48" between centers Speeds, 10- 450 Inch threading 26" faceplate 220/480 Volt, 3 Phase

Ad # 7500		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1942	Monarch	27N	Good	SOLD	Photo / More Info.
1942 MONARCH 27N 30.5" x 108"cc Lathe: 108" Betw Centrs 30.5" Swing 30 HP 6-303 RPM Tailstock Coolant System Chip Guard Fresh Paint * All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing. Full Machine Specifications Distance Between Centers 108" Swing 30.5" Weight 18000 LBS HP 30 RPM 6-303 Equipped With Tailstock 3 Steady Rests 12",14",18" Bull nose Live Centers 4", 6", 7",12" 4 jaw Chuck 21" 3 Jaw chuck 18" Coolant System Chip Guard Fresh Paint

Ad # 12927		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1944	Hendey	24 x 72 80 centers	Good	sold	Photo / More Info.
—: —

Ad # 13654		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1945	Monarch	36 NN	Good	sold	Photo / More Info.
53"swing x 84" centers: Monarch 36 NN Year: 1945 Voltage: 220 3Phase RPM 6 - 303 threading:inch only 53" Swing x 84" between centers 44" over crosslide 4 Jaw Chuck 40" Face Plate: 48" Tail Stock 4 Jaw 19 1/2" live center chuck Fabricated Steady Rest includes some tooling-holders Box w/tool holders

Ad # 12698		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1946	American	27"	Good	sold	Photo / More Info.
28" x 20 Ft: American Lathe Model 27" 28" swing x 20 Ft centers RPM 11 - 450 4 Jaw 28" Chuck 2 Steady rests 8" and 12" 20" swing over cross slide includes a toolpost grinder

Ad # 13925		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1950's ?	Lodge and Shipley	?	Fair	sold	Photo / More Info.
36" Swing, 20 feet between centers: Lodge & Shipley Lathe Capacity: 20ft. between centers, 36" Swing Electrical: 110/Single Phase HP: 2

Ad # 7302		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1952	Monarch	32 in, NN	Very Good	SOLD	Photo / More Info.
40" x 180" Monarch Engine Lathe: Swing: Approx 40.5" Distance Between Centers: 180" Spindle Through Bore: 2-1/2" Spindle Speed Range: 8 - 405 rpm (via gears) 28" Independant 4-Jaw Chuck with manual Face Plate Tailstock Taper Attachment Steady Rest Distance Between Ways: 24" Inch Threading

Ad # 11302		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1952	Heyligenstaedt	154543	Very Good	sold	Photo / More Info.
24" swing bed x 90"centers: SWING ...24" over bed, 22 over cross slide(low profile) CENTER distance………90” THRU HOLE................... 3.5” EQUIPPED WITH: 12"-3 Jaw Chuck, 22"-4 Jaw Chuck, Quick Change Tool Post, Lube System, Tail Stock, Steady Rest(6"),follow rest Threading- inch/metric 5MT tailstock travel dial on bed rapid traverse no gap in bed 25HP very heavy duty machine in great condition completely rebuilt in the 90's ways look great

Ad # 5950		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1952	MONARCH	N	Good	sold	Photo / More Info.
25” x 72”cc MONARCH Model N Heavy Duty Engine Lathe: 25” x 72”cc MONARCH Model N Heavy Duty Engine Lathe Max. swing over bed ways 27 ½” Max. swing over compound rest 14” Spindle bore 2 3/16” Bed width 25” Top slide travel 6” Tailstock spindle diameter 4 7/8” Tailstock spindle taper No.6 M.T. Tailstock spindle travel 8 ½” 16 Spindle speeds 8-405 RPM 48 feeds .0038-.240 IPR Thread range 1 ½ - 92 T.P.I. EQUIPPED WITH: Flame hardened bed ways Swivel compound D1-8” Camlock spindle 24” Dia. 4-jaw chuck 16” Dia. back-plate Chip pan 30 H.P. 3/60/480 Volt Motor

Ad # 11377		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1953	Sidney Tool	—	Very Good	sold	Photo / More Info.
24" x 72": Sidney 24" x 72" Swing Over Bed Ways 24" Swing Over Cross Slide 13-1/2" Center Distance 72" Spindle Hole 2-3/4" Spindle Speeds 17 To 1,000 Rpm's Chuck Size 18" 4 Jaw Feeds .0075 To 240 Threads Inch 1-1/2 To 90 TPI Tail Stock Taper # 4Morse

Ad # 5816		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1955	BETTS BRIDGEFORD	158in x 60ft	Very Good	SOLD	Photo / More Info.
158" X 60' BETTS BRIDGEFORD HEAVY DUTY ENGINE LATHE: MAXIMUM SWING OVER BEDWAYS: 158" MAXIMUM SWING OVER CARRIAGE WINGS: 124" DISTANCE BETWEEN CENTERS: 720" WEIGHT CAPACITY BETWEEN CENTERS: 200 TONS UNSUPPORTED 325 TONS WITH STEADY RESTS SPEEDS: (LOW) .5 TO 15 RPM (HIGH) 2 TO 60 RPM THREADING RANGE: 1/2 TO 56 TPI FEED RANGE: .002" TO 1.100" PER/REV CROSS SLIDE TRAVEL: 72" TOP SLIDE TRAVEL: 22" CARRIAGE LENGTH ON BEDWAYS: 108" CARRIAGE BRIDGE WIDTH: 32" TAILSTOCK QUILL DIAMETER: 28" TAILSTOCK QUILL TRAVEL: 33" BED WIDTH OVER OUTER WAYS: 115" LENGTH OF BED: 78'5" MOTOR: 200 HP 230 VOLT DC EQUIPPED WITH: 144" FACEPLATE W/JAWS FULL LENGTH LEADSCREW THREADING TAPER ATTACHMENT WITH POWER POSITIONING MOTOR ANGULAR SWIVEL ON COMPOUND & CARRIAGE (3) BRONZE TIPPED STEADY RESTS - 9" TO 48" CAPACITY 60 TON STEADY REST CAPACITY 4-AXIS SONY DIGITAL READOUT SYSTEM W/SCALES RIGHT & LEFT HAND SPINDLE ROTATION MOTORIZED QUILL FARVAL LUBRICATION SYSTEM FULL LENGTH CHIP CONVEYOR OPERATORS PLATFORM WITH PENDANT OPERATORS STATION HARDENED WAYS ON BED AND CARRIAGE MOTORIZED POSITIONING OF CARRIAGE FRONT AND BACK CARRIAGE COOLANT SYSTEM HEAVY DUTY CASTED BED NOTE - ALL NEW SEIMENS ELECTRICS IN 1988 (Siemens Simoreg Microprocessor DC Drive S5-115U Simatic S5 Programmable DC Dontroler 460/230 Volt)

Ad # 15374		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1959	AXELSON	2516 D	Excellent	sold	Photo / More Info.
28'' X 120''REBUILT : AXELSON 28'' X 120'' (20 HP) NEWALL 2-AXIS DRO: REBUILD IN 2010 AXELSON LATHE MODEL 2516-D 20HP 28'' X 120'' NEWALL 2-AXIS ...

Ad # 16084		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1959	axelson	3020	Good	sold	Photo / More Info.
35 x 12 ft bc: 1959 model Axelson 35.5" swing x 15' bed length overall between centers 12ft thru spindle hole 9- 1/4"" 4 jaw chucks 480/3 volt air over hydraulic clutch Bought 1980 paid $58,000.00 We had ways scrapped in 1998, rebuilt taper attachment 1959 Model Axelson with 9" spindle double 4 jaw chucks, air over hydraulic clutch, I should have 2 steady rests (1 large 1 small)If I can find them.?? I bought Axelson in 1980,in 1997 I had the taper attachment ground & ways scraped. I sent this machine to Gates Machine Tool Repair in Manvel Tx. and paid $10,000.00 to have it repaired & sent this lathe up here. It's been sitting here since reworked

Ad # 15374		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1959	AXELSON	2516 D	Excellent	sold	Photo / More Info.
28'' X 120''REBUILT : AXELSON 28'' X 120'' (20 HP) NEWALL 2-AXIS DRO: REBUILD IN 2010 AXELSON LATHE MODEL 2516-D 20HP 28'' X 120'' NEWALL 2-AXIS ...

Ad # 9812		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1960's	Cincinnati	Hydrashift	Good	sold	Photo / More Info.
26 x 96: tailstock, 15"-3jaw, steady rest, inch threading, 2-5/16 hole thru spindle

Ad # 6694		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1960	MONARCH	2516X72	Good	Sold	Photo / More Info.
27”x72”cc MONARCH Series 80 Dyna-Shift H Duty Engine Lathe, 2516X72 : 27”x72”cc MONARCH Series 80 Dyna-Shift Heavy Duty Engine Lathe, Model 2516X...

Ad # 5817		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1960	DORTMUND	22ft SWING x 60ft LONG	Good	SOLD	Photo / More Info.
22' X 60' MFD DORTMUND HEAVY DUTY LATHE: MAXIMUM SWING: 22'4" MAXIMUM CENTER DISTANCE: 60' MAXIMUM WORKPIECE WEIGHT CAPACITY: 88 TONS SPINDLE SPEEDS: (20) 0.3 TO 24 RPM FEED RANGE: (20) .0053" TO 0.424" MOTOR: 55 KW HORIZONTAL DRILLING ATTACHMENT 16'4" FACEPLATE TAILSTOCK OPERATOR CONTROL PLATFORM NOTE - MODULAR TYPE LATHE WITH 60' OF T-SLOTTED FLOORPLATE, 18' WIDE.

Ad # 9335		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1961	Kramatorsk	1660	Good	sold	Photo / More Info.
30 tons: max dia of workpiece 1250 mm. weight of workpiece 30 tons. distantion between centers 6300 mm. weight of machine 47 tons.

Ad # 11586		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1964	VDF	V1250	Good	sold	Photo / More Info.
50"swing x 20ft centers: 1964 VDF V1250 50"swing x 20 ft centers 40" over the cross slide spindle bore:4-1/2" first 11" length stepped down to 3-1/4" chuck has 4.5" bore 4 Jaw Chuck 48" Steady Rest 24" max opening inch/metric threads 50 HP Tail Stock Rapid Travel RPM Range:300 max rigger fee to load: approx: $2000.00

Ad # 7966		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1965	Morando /Torino	TUF-1	Very Good	Sold	Photo / More Info.
Large 98" swing x 240 "(20ft) centers Lathe: Swing over bed max -98" max swing 66" over crosslide center dist. 240" centers, 20ft bed width-37-1/2" speeds-2-120 RPM soft start 50 HP motor-upgraded feature 3.5" spindle bore rapid traverse on bed 4 jaw -55" dia.chuck steady rest 30" cap square ways this is a raised bed machine motorized tailstock Metric threading w/ many inch change gears included: capable of 0.5, .75, 1 up to 12, 14, 16, 18, 20, 24 threads per inch & metric: 0.5, 0.75,1, 1.25, 1.5, 1.75, 2, 2.25, 2.5, 3.5, 4, 4.5, 5, 6, 7, 8, 9, 10, 20, 34, 40-100, 120, 140, 160, 180, 200 mm/m-metric complete manuals with prints

Ad # 4036		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1965	LEBLOND	2516-20	Good	sold	Photo / More Info.
23" x 54" LEBLOND H.D HEAVY DUTY ENGINE LATHE : MAXIMUM SWING OVER BED WAYS: 29" DISTANCE BETWEEN CENTERS: 54" SPINDLE BORE: 2 1/16" SPINDLE NOSE: L-2 TAPERED KEYCROSS SLIDE TRAVEL: 14 1/2" TAIL STOCK SPINDLE DIAMETER: 4 1/2" TAIL STOCK SPINDLE TAPER: #5 M.T. 27 SPINDLE SPEEDS: 12 TO 1500 RPM 109 FEEDS: .001-.205 IPR THREAD RANGE: 2 TO 360 T.P.I.

Ad # 9421		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1965	Monarch	2516	Very Good	Sold	Photo / More Info.
26" X 264": 26" x 264" cc (635mm X 6706mm) Monarch Lathe Model 2516, 12 To 1500 RPM, Ha...

Ad # 1721		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1965 ?	LeBlond	Regal	Good	Sold	Photo / More Info.
LeBlond Regal 26" x 120" Engine Lathe: Swing: 26" over bed, swing over cross slide-19" DCB: 120"centers 3" spindle bore ? Steady Rest Quick Change Tool Post Gear Driven Spindle Inch Threading Coolant System 4-Jaw Chuck

Ad # 5933		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1966	IKEGAI	DA-25	Very Good	sold	Photo / More Info.
24”/32” x 120”cc IKEGAI Removable Gap Bed Lathe: 24”/32” x 120”cc IKEGAI Removable Gap Bed Lathe Maximum swing over bed ways 24.4” Maximum swing over cross slide 15.35” Maximum swing through gap 32” Maximum length of gap from front of chuck 9” Spindle bore 2.17” Spindle nose type A Bed width 16-15/16” Tailstock spindle diameter 2-15/16” Tailstock spindle taper No. 5 M.T. 20 Spindle speeds 25-2000 RPM 44 Longitudinal feeds 0.00136-0.0937 IPR 44 Cross feeds 0.00044-0.0315 IPR Thread range: Inch 2-28 T.P.I. Metric 1 to 224 mm. Module 0.25-56 EQUIPPED WITH: Removable gap bed Induction hardened bed ways Swivel compound Hydraulic tracer attachment (less power unit) 2-speed drilling type tailstock Extra fine feed arrangement 15” diameter 3-jaw universal chuck Thread dial Carriage stop Quick-change tool post with toolblock and tool Work light 3-point plain follow rest 3-point 7 ½” diameter capacity steady rest 3-point 6” diameter capacity steady rest Motor amp meter (2) slide out chip pans with coolant pump 15 H.P. 3/60/220-440 volt motor with controls

Ad # 9800		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1967	Kotobuki	PB42	Very Good	sold	Photo / More Info.
60"swing---T type Lathe: 60" swing x 31" centers-T type Lathe 3 ft.-36" dia chuck-4 jaw 4 way tool post 970-1170 rpm motor 4-200 rpm HP-? thru hole 2.5" servo feed unit for taper holes mounted on cross slide..

Ad # 6486		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1967	LODGE & SHIPLEY	MAGNATURN	Very Good	SOLD	Photo / More Info.
32´´ X 288´´ (24') LODGE & SHIPLEY ´´MAGNATURN´´ ENGINE LATHE: 32´´ X 288´´ (24') LODGE & SHIPLEY ´´MAGNATURN´´ ENGINE LATHE: SWING OVER WAYS ............... 34´´ SWING OVER CROSS SLIDE ........ 21´´ CENTER DISTANCE ............... 288´´ SPINDLE SPEEDS ................ (36) 6 TO 750 RPM FEEDS ......................... (30) .0038 TO .240 IPM THREADS ....................... (30) 1/2 TO 32 TPI DIAMETER OF SPINDLE HOLE ...... 3-9/16´´ CHUCK ......................... 28´´ 4-JAW TAPER ATTACHMENT .............. YES 4 WAY RAPID TRAVERSE .......... YES HARD WAYS ..................... YES CHIP PAN AND COOLANT .......... YES MOTOR ......................... 60 HORSEPOWER

Ad # 7301		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1968	Martin	DS-99	Good	sold	Photo / More Info.
40" x 176" Engine Lathe: Swing over Ways: 40" (approx) Distance Between Centers: 178" (from spindle nose to END of Bed) Spindle Through Bore: 3-1/2"

Ad # 6695		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1970	MONARCH	2516X96	Good	Sold	Photo / More Info.
27” x 96”cc MONARCH Series 80 Dyna-Shift H Duty Engine Lathe, 2516X96: 27” x 96”cc MONARCH Series 80 Dyna-Shift Heavy Duty Engine Lathe, Model 251...

Ad # 6487		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1970	TIMEMASTER	50	Very Good	SOLD	Photo / More Info.
50´´ X 26' TIMEMASTER ENGINE LATHE: 50´´ X 26' TIMEMASTER ENGINE LATHE: SWING OVER WAYS .............. 50´´ SWING OVER CROSS SLIDE ....... 31´´ SWING IN GAP ................. 62´´ (15´´ WIDE) DISTANCE BETWEEN CENTERS ..... 312´´ (26') LENGTH OF GAP ................ 16´´ SPINDLE SPEEDS ............... (24) 5 TO 475 RPM FEEDS ........................ YES METRIC THREADS ............... .1 TO 224 MM PITCH DIAMETER OF SPINDLE HOLE ..... 4-3/4´´ TAPER ATTACHMENT ............. YES HARD WAYS .................... YES THREAD DIAL .................. YES 4-JAW CHUCK .................. 31´´ STEADY REST .................. 12´´ 3-POINT ROLLER TYPE MOTOR ........................ 40 HP

Ad # 14249		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1971	Mazak-Hercules Ajax	24"	Good	sold	Photo / More Info.
24" swing x 10ft between centers: Mazak-Hercules Ajax Manual Lathe Model: Mazak 24 Capacity: 24" swing x 10ft. between centers Swing Over Cross Slide:14.46" 2" spindle bore Electrical: 220 / 3 phase Includes: 2 steady rests tapper attachment 3 jaw chuck recently refurbished, very good working order

Ad # 15929		Heavy Duty Large Lathe 24in. & over swing		Ad to Checklist
1974	leblond	7H	Fair	sold	Photo / More Info.
36 x 72": leblond H7 manual lathe,raised headstock type swing 36" over bed ways,30" over cross slide center distance: 72" 3" spindle bore includes: 15" 3 jaw chuck,18" 4 jaw chuck steady rest servo shift inch threading travel dial on z bed

You can use the navigation bar below to jump to other groups of 75 results out of your total of 96 hits.

current group

groups previously viewed

groups not yet viewed

75 150 Next