Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 11239 ,    Year = New ,     Make = C-320NC-CE ,     Model = Cosen   Ad #: 11239 Year: New Make: C-320NC-CE Model: Cosen Equip. Type: Dual Column Auto Band Saw Our Price: call FOB: Charlotte, NC Phone: 704-660-8130 C-320NC Machine Features Structure     • Oversized precision ground, large dual columns     • Cross link connecting two columns for enhanced structural strength     • Back-tilted saw frame for longer blade life     • Hydraulic shuttle vise assembly Blade Drive     • Specially designed gearbox for high lateral pressure     • Inverter controlled infinitely variable blade speed Blade Guidance & Lubrication System     • Carbide blade guides with bearing guides     • Two additional guides to support the blade from the top     • Automatic hydraulic blade tensioning device     • Integral coolant system     • Pitch design for coolant drainage     • Synchronized power driven blade brush Control & Automation     • Smart NC-20 (SNC-20) technology programmable up to 20 different jobs     • Automatic kerf compensation & automatic multiple indexing     • "Save-a-Blade" design to prevent tooth deformities     • Automatic shutdown     • Error code display for simplified self-diagnostics     • LCD screen with film type key pad, blade speed/life, feed vise position display     • Precision feed pressure & feed rate dual valve system     • Bundle/single cutting mode switch     • Automatic work height selector & air gap eliminator Material Feeding & Clamping     • Split vise jaws featuring automatic feeding down to remnant length of 50mm (2")     • Hydraulic front and rear vises     • Ductile cast iron vises with replaceable hardened wear plates     • Computer controlled multiple indexing up     • One set of vertical alignment rollers Safety     • Proximity switch for sensing blade slippage or breakage     • Interlock design in electrical and hydraulic system     • Conduits protection measure     • "Alert Orange" safety measure Standard Accessories     • Blade "clip" device for easy blade change     • Adjustable front plate for cut-off stock     • Additional flushing hose     • Bi-metal saw blade     • Built in work light     • Tool box, leveling pads, and an additional wire brush     • Operation & parts manual Design & Specification are subject to change without notice and obligation. Standar Machine Accessories Hyd, Chip Auger or Top Clamps      AH-25H/C-250NC -- C-320NC       $1,895.00 Variable Vise Pressure                     AH-250H --- C-520NC                 $995.00 Extra yar parts warranty                                                            Varies by model Super Heavy Duty Roller Table 5 ft.             up to C-460NC                $1,095.00 Super Heavy Duty Roller Table 10 flt.           up to C-460NC                $1,895.00 Heavy Duty Roller Table 6'6 w/vertical roller  up to C-460NC                $1,495.00 Transformer 460 V                                    varies by model               P.O.R. Material Handling                                                                           P.O.R. Capacity Round 320 mm (12.6") Square 320 mm (12.6") Rectangular(H x W) 380 x 320 mm (15" x 12.6") Bundle Capacity Width 190-300 mm Height 70-140 mm Saw Blade Speed 20-100 m/min. (66-328 fpm) Size(LxWxT) 4240L x 34W x 1.1Tmm (184" x 1.3" x 0.05") Tension Hydraulic (Automatic blade breakage detection) Motor Output Saw blade 5 HP (3.7 KW) Hydraulic 1HP (0.75 KW) Coolant 1/8 HP (0.1 KW) Hydraulic Tank 25 L (6.6 gal.) Coolant Tank 45 L (11.9 gal.) Vise Control Hydraulic Automatic Indexing Length Single 403 mm (15.9") Multiple Max. 6500 mm (max. 650") Rest Piece 50 mm (2") Height of Work Bed 790 mm (31") Net/Gross Weight 2000/2200 kgs Floor Space 2010 x 2000 mm (79" x 79") Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 11241 ,    Year = New ,     Make = Cosen ,     Model = C-520NC-CE   Ad #: 11241 Year: New Make: Cosen Model: C-520NC-CE Equip. Type: Dual Column Auto Band Saw Our Price: call FOB: Charlotte, NC Phone: 704-660-8130 C-520NC Machine Features Structure     • Oversized precision ground, large dual columns     • Cross link connecting two columns for enhanced structural strength     • Back-tilted saw frame for longer blade life     • Hydraulic shuttle vise assembly Blade Drive     • Specially designed gearbox for high lateral pressure     • Inverter controlled infinitely variable blade speed Blade Guidance & Lubrication System     • Hydraulic carbide blade guides with bearing guides     • Two additional guides to support the blade from the top     • Automatic hydraulic blade tensioning device     • Integral coolant system     • Pitch design for coolant drainage     • Synchronized power driven blade brush Control & Automation     • Smart NC-20 (SNC-20) technology programmable up to 20 different jobs     • Automatic kerf compensation & automatic multiple indexing     • "Save-a-Blade" design to prevent tooth deformities     • Automatic shutdown     • Error code display for simplified self-diagnostics     • LCD screen with film type key pad, blade speed/life, feed vise position display     • Precision feed pressure & feed rate dual valve system     • Bundle/single cutting mode switch     • Automatic work height selector & air gap eliminator Material Feeding & Clamping     • Split vise jaws featuring automatic feeding down to remnant length of 90mm (3.5")     • Double retracting vise jaws     • Full stroke hydraulic front and rear vises     • Ductile cast iron vises with replaceable hardened wear plates     • Smart NC controlled multiple indexing     • Multiple horizontal rollers to facilitate smooth material feeding     • Discharge table with built-in coolant return     • One set of vertical alignment rollers Safety     • Proximity switch for sensing blade slippage or breakage     • Interlock design in electrical and hydraulic system     • Conduits protection measure     • "Alert Orange" safety measure Standard Accessories     • Blade "clip" device for easy blade change     • Adjustable fence to support bundled cut-off stock     • Additional flushing hose     • Bi-metal saw blade     • Built in work light     • Tool box, leveling pads, and an additional wire brush     • Operation & parts manual Design & Specification are subject to change without notice and obligation. Standard Machine Accessories Hyd, Chip Auger or Top Clamps      C-400NC --- C-620NC              $2,495.00 Variable Vise Pressure                   AH-250H --- C-520NC                $995.00 Extra yar parts warranty                                                            Varies by model Transformer 460 V                                    varies by model               P.O.R. Material Handling                                                                           P.O.R. Capacity Round 520 mm (20.5") Square 520 mm (20.5") Rectangular(H x W) 560 x 520 mm (22" x 20.5") Bundle Capacity Width 250-470 mm Height 150-315 mm Saw Blade Speed 20-100 m/min. (66-328 fpm) Size(LxWxT) 6040L x 54W x 1.6Tmm (238" x 2.1" x 0.06") Tension Hydraulic (Automatic blade breakage detection) Motor Output Saw blade 7.5 HP (5.6 KW) Hydraulic 2 HP (1.5 KW) Coolant 1/4 HP (0.19 KW) Hydraulic Tank 40 L (10.6 gal.) Coolant Tank 85 L (22.5 gal.) Vise Control Hydraulic Full Stroke Cylinder Automatic Indexing Length Single 600 mm (23.6") Multiple Max. 6500 mm (max. 650") Rest Piece 90 mm (3.5") Height of Work Bed 690 mm (27.2") Net/Gross Weight 3700/4300 kgs Floor Space 2400 x 2677 mm (94.5" x 105") Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 11238 ,    Year = new ,     Make = Cosen ,     Model = C-400NC   Ad #: 11238 Year: new Make: Cosen Model: C-400NC Equip. Type: Automatic Band Saw Our Price: call FOB: Charlotte, NC Phone: 704-660-8130  C-400NC Machine Features Structure     • Oversized hydraulic cylinder     • Back-tilted saw frame for longer blade life     • Hydraulic shuttle vise assembly Blade Drive     • Specially designed gearbox for high lateral pressure     • Inverter controlled infinitely variable blade speed Blade Guidance & Lubrication System     • Carbide blade guides with bearing guides     • Two additional guides to support the blade from the top     • Automatic hydraulic blade tensioning device     • Integral coolant system     • Synchronized power driven blade brush Control & Automation     • Smart NC-20 (SNC-20) technology programmable up to 20 different jobs     • Automatic kerf compensation & automatic multiple indexing     • "Save-a-Blade" design to prevent tooth deformities     • Automatic shutdown     • Error code display for simplified self-diagnostics     • LCD screen with film type key pad, blade speed/life, feed vise position display     • Precision feed pressure & feed rate dual valve system     • Bundle/single cutting mode switch     • Automatic work height selector & air gap eliminator Material Feeding & Clamping     • Split vise jaws featuring automatic feeding down to remnant length of 80mm (3.15")     • Double retracting vise jaws     • Full stroke hydraulic front and rear vises     • Ductile cast iron vises with replaceable hardened wear plates     • Computer controlled multiple indexing     • One set of vertical alignment rollers     • Multiple horizontal rollers to facilitate smooth material feeding     • Discharge table with built-in coolant return Safety     • Proximity switch for sensing blade slippage or breakage     • Interlock design in electrical and hydraulic system     • Conduits protection measure     • "Alert Orange" safety measure Standard Accessories     • Blade "clip" device for easy blade change     • Adjustable material stop     • Additional flushing hose     • Bi-metal saw blade     • Built in work light     • Tool box, leveling pads, and an additional wire brush     • Operation & parts manual Design & Specification are subject to change without notice and obligation. Standard Machine Accessories Hyd, Chip Auger or Top Clamps      C-400NC --- C-620NC              $2,495.00 Variable Vise Pressure                   AH-250H --- C-520NC                $995.00 Extra yar parts warranty                                                            Varies by model Super Heavy Duty Roller Table 5 ft.             up to C-460NC             $1,095.00 Super Heavy Duty Roller Table 10 flt.           up to C-460NC             $1,895.00 Heavy Duty Roller Table 6'6 w/vertical roller  up to C-460NC              $1,495.00 Transformer 460 V                                    varies by model               P.O.R. Material Handling                                                                           P.O.R. Capacity Round 400 mm (16") Square 400 mm (16") Rectangular(H x W) 400 x 400 mm (16" x 16") Bundle Capacity Width 215-295 mm Height 100-190 mm Saw Blade Speed 20-100 m/min. (66-328 fpm) Size(LxWxT) 4570L x 41W x 1.3Tmm (180" x 1.6" x 0.05") Tension Hydraulic (Automatic blade breakage detection) Motor Output Saw blade 7.5 HP (5.5 KW) Hydraulic 2 HP (1.5 KW) Coolant 1/4 HP (0.19 KW) Hydraulic Tank 40 L (10.6 gal.) Coolant Tank 80 L (21 gal.) Vise Control Hydraulic Full Stroke Cylinder Automatic Indexing Length Single 593 mm (23.3") Multiple Max. 6500 mm (max. 650") Rest Piece 90 mm (3.5") Height of Work Bed 750 mm (29.5") Net/Gross Weight 2550/2750 kgs Floor Space 2450 x 2310mm (96" x 91") Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 11240 ,    Year = New ,     Make = C-420NC-CE ,     Model = Cosen   Ad #: 11240 Year: New Make: C-420NC-CE Model: Cosen Equip. Type: Dual Cloumn Auto Band Saw Our Price: call FOB: Charlotte, NC Phone: 704-660-8130 C-420NC Machine Features Machine Structure: * Oversized Precision ground, large Dual Columns support and guide the rugged saw head through the entire cutting cycle. The saw head adopts a back tilt design which allows the blade to twist less than traditional bandsaws between the wheel and blade guide; thereby putting less stress on the blade, insuring longer life. * The oversized round columns provide hundreds of square inches of continuous surface contact with the sawhead throughout the entire cutting process. * Cross Link is located on the top of the columns, connecting the two columns to form an archway design that gives it sound structural strength. * Hydraulic shuttle vise assembly, made of heavy-duty cast iron with replaceable hardened wear plates, rides on two large guide shafts that are capable of handling extreme loads. Both shafts are ground and chrome plated for durability and smooth material feeding. Blade Drive: * The gearbox is specially designed to accept high lateral pressure. Unlike conventional gearboxes, the Cosen design accepts more pressure during operation and will not create thermal distortion, providing long gearbox life under production conditions. * Inverter blade drive system allows infinitely variable blade speeds to be controlled by the operator from the control panel with turn of a knob. The system comes standard with LED readout for convenient and accurate setting of blade speed. Blade Guidance & Lubrication System: * Carbide guides securely guide the blade during the cutting cycle. The carbide is relieved so that coolant can both cool and lubricate the blade during the cut. * The bearing guides eliminate blade stress by pre-aligning the blade before it enters the carbide guides. Two additional insertslocated on a central axis support the blade from the top, giving it extra penetrating force for faster cuts. * Automatic hydraulic blade tensioning device provides correct blade tensioning when the machine is turned on and will slightly release the tension when the machine is not running. This extends blade life. The on-off hydraulic valve switch is an added feature making blade change quicker and easier * Integral coolant system. Coolant is supplied at four critical points: exit & entry of blade through blade guides, middle of cut via adjustable flex hose, and blade cleaning brush. * Synchronized power driven blade brush effectively cleans chips from blade to extend blade life. Capacity Round 420 mm (16.5") Square 420 mm (16.5") Rectangular(H x W) 420 x 420 mm (16.5" x 16.5") Bundle Capacity Width 190-360 mm Height 100-180 mm Saw Blade Speed 20-100 m/min. (66-328 fpm) Size(LxWxT) 4770L x 41W x 1.3Tmm (187.8" x 1.6" x 0.05") Tension Hydraulic (Automatic blade breakage detection) Motor Output Saw blade 7.5 HP (5.6 KW) Hydraulic 2 HP (1.5 KW) Coolant 1/8 HP (0.1 KW) Hydraulic Tank 40 L (10.6 gal.) Coolant Tank 85 L (22.5 gal.) Vise Control Hydraulic Full Stroke Cylinder Automatic Indexing Length Single 503 mm (19.8") Multiple Max. 6500 mm (max. 650") Rest Piece 60 mm (2.4") Height of Work Bed 700 mm (27.5") Net/Gross Weight 3000/3300 kgs Floor Space 2490 x 2360 mm (98" x 93") Ad Summary: Control & Automation: NC-99Systemis programmable to 99 different jobs including quantity and length of cut. Automatic First Cut function automatically trims off the irregular end of the stock without any measurement or manual operation. Key pad entry of programmable quantity and length of cut with automatic shut-off for finished job(s) or out of stock. Stored program(s) may be easily recalled and executed at Will. Browsing, selecting and modifying the preset program during operations are allowed. LCD Screen with Film Type Key Pad Blade Speed Display Blade Life Indicator Feed Vise Position Display Automatic Kerf Loss Compensation & Automatic Multiple Indexing up to 6500mm Save-a-Blade Feature - The shuttle vise will automatically retract the material slightly after cut-off, so a blade can avoid the undesirable abrasion with material, improving cutting tool life. Error Code Display Provides simplified self-diagnostics. Precision feed pressure & feed rate dual valve system for optimal cutting performance in any material. Material Clamping & Feeding: Split vise jaws on the front machine vise are standard. The split front vise will hold the work piece on both sides of the blade for a burr-free cut. This system also features automatic feeding of material down to a remnant length of 60mm. Full stroke hydraulic front and rear vises enable clamping and unclamping of any material from the operators control station. Zero clamping is made possible. Ductile cast iron viseswith replaceable hardened wear plates. NC Controlled Multiple indexingfor long cutting lengths of up to 9999 mm maximum length, utilizing full shuttle length every index until desired length is reached. One set of vertical alignment rollers, which is convenient for bundle cutting and positioning bar stock, is standard and is located on the machine base. Discharge Table with built¨Cin coolant return adequately supports cut-off stock and provides coolant savings in the long run. Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User