Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 168 ,    Year = NEW ,     Make = KMT ,     Model = H310M   Ad #: 168 Year: NEW Make: KMT Model: H310M Equip. Type: Mitering Band saw Our Price: call FOB: Portage, Mi Phone: 704-660-8130 Features: Our AutoCut Series Mitering Band saws feature mitering up to 45° to the left and up to 60° right! This series features an array of operating characteristics that gives these machines the designation the AutoCut Series! Band saw operation is push button, vising is quick and simple, and the band saw operators console information system includes data such as power on, blade speeds, drive motor load, blade tension, broken blade, and overload conditions. The band saws are available in Manual and Semi-Automatic models. Shown with AC104 Equipped with: Heavy Duty Drive, TEFC Motor 24 Volt Controls Heavy Duty Vari-Speed, Totally Enclosed Transmission Electricals to NFPA-79 Electrical Standards Bi-Metal Blade Carbide blade guides Sawframe setup, controlled rate & rapid approach Shutoff for broken blade or low tension Blade drive load monitor Full coolant System Operators Tools All Safety Guards Ad Summary: AutoCut Series Mitering Band saws feature mitering up to 45° to the left and up to 60° right, Manual saw= head does not raise back up at end of cut.... Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 171 ,    Year = NEW ,     Make = National ,     Model = NA5212   Ad #: 171 Year: NEW Make: National Model: NA5212 Equip. Type: Air Shear Our Price: call FOB: Smartt, TN Phone: 704-660-8130 Specifications: CAPACITY 12 GAUGE 2.7 mm. MILD STEEL, 16 GAUGE 1.6 mm. STAINLESS STROKES PER MINUTE APPROX. 40 CUTTING LENGTH 52" 1321 mm. SHIPPING WEIGHT 1600 lbs. 726 kgs. FLOOR SPACE W/ GAUGES 62" x 75 7/8" x 42 1/4", 1575 x 1927 x 1073 mm. FLOOR SPACE W/O GAUGES 62" x 22 3/4" x 42 1/4", 1575 x 578 x 1073 mm RECOMMENDED p.s.i.100 Ad Summary: 52in 12 gauge mild steel Air Shear Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 10502 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 167 ,    Year = NEW ,     Make = KMT ,     Model = H310SA   Ad #: 167 Year: NEW Make: KMT Model: H310SA Equip. Type: Mitering Band saw Our Price: call FOB: Portage , MI Phone: 704-660-8130 Features: Our AutoCut Series Mitering Band saws feature mitering up to 45° to the left and up to 60° right! This series features an array of operating characteristics that gives these machines the designation the AutoCut Series! Band saw operation is push button, vising is quick and simple, and the band saw operators console information system includes data such as power on, blade speeds, drive motor load, blade tension, broken blade, and overload conditions. The band saws are available in Manual and Semi-Automatic models Equipped with: Full Electronic Control / Information System Heavy Duty Drive, TEFC Motor 24 Volt Controls Heavy Duty Vari-Speed, Totally Enclosed Transmission Electricals to NFPA-79 Electrical Standards Bi-Metal Blade Carbide blade guides Sawframe setup, controlled rate & rapid approach Shutoff for broken blade or low tension Blade drive load monitor Full coolant System Operators Tools All Safety Guards Ad Summary: AutoCut Series Mitering Band saws feature mitering up to 45° to the left and up to 60° right Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 11380 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 173 ,    Year = NEW ,     Make = National ,     Model = NH7225   Ad #: 173 Year: NEW Make: National Model: NH7225 Equip. Type: 1/4" Hydraulic Shear Our Price: call FOB: Smartt, Tn Phone: 704-660-8130 Specifications: CAPACITY MILD STEEL 1/4" 6.4 mm. STAINLESS 1/8" 3.2 mm. STROKES PER MINUTE APPROX. 20 CUTTING LENGTH 72" 1829 mm. SHIPPING WEIGHT 6000 lbs. 2722 kgs. FLOOR SPACE W/ GAUGES 84"x 38"x 54", 2134 x 2489 x 1372mm. FLOOR SPACE W/O GAUGES 84"x 38"x 54", 2134 x 965 x 1372mm OIL RESERVOIR CAPACITY 10026 gal. 98 l. Motor 7 1/2 h.p. 208/240/460 VOLT-3Phase, 1800 r.p.m. Ad Summary: 72in x 1/4" mild steel Hydraulic Shear Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 11043 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 166 ,    Year = NEW ,     Make = KMT ,     Model = H 350 M   Ad #: 166 Year: NEW Make: KMT Model: H 350 M Equip. Type: Mitering Band saw Our Price: call FOB: Portage, MI Phone: 704-660-8130 Features: Our AutoCut Series Mitering Band saws feature mitering up to 45° to the left and up to 60° right! This series features an array of operating characteristics that gives these machines the designation the AutoCut Series! Band saw operation is push button, vising is quick and simple, and the band saw operators console information system includes data such as power on, blade speeds, drive motor load, blade tension, broken blade, and overload conditions. The band saws are available in Manual and Semi-Automatic models. Shown with AC112 Equipped with: Heavy Duty Drive, TEFC Motor 24 Volt Controls Heavy Duty Vari-Speed, Totally Enclosed Transmission Electricals to NFPA-79 Electrical Standards Bi-Metal Blade Carbide blade guides Sawframe setup, controlled rate & rapid approach Shutoff for broken blade or low tension Blade drive load monitor Full coolant System Operators Tools All Safety Guards Ad Summary: AutoCut Series Mitering Band saws feature mitering up to 45° to the left and up to 60° right Note 1: Please specify exact voltage . Note 2:H350M-S=Stretch version of above with 12" capacity at 45deg. Price:$8,550.00 Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 11621 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 162 ,    Year = NEW ,     Make = KMT ,     Model = C 316   Ad #: 162 Year: NEW Make: KMT Model: C 316 Equip. Type: Cold Saw Our Price: call FOB: Portage, MI Phone: 704-660-8130 Standard Equipment: TEFC Motor Totally Enclosed Transmission 24 Volt Controls HSS Sawblade Built-in Flood Coolant All Safety Guards Operators Manual/Parts List Features: The C 316 Series features rugged heavy duty vertical column circular sawing machines with saw frame swiveling capability for mitering. Model C 316 Completely manual operation. Model C 316 AV -Manual sawing operation with quick clamping of air vise. The vertical column construction provides extremely stable saw frame guidance and stability, with vibration free sawing! The machine can operate in a conventional 90° cutoff mode for conventional sawing, and with a simple turn of a locking lever, the saw frame can be swiveled to any desired angle up to 45° left or 60° right for miter sawing. The mitering device carries a highly visible scale, and comes equipped with a preset stop for accurately returning to zero Ad Summary: KMT Model - 316 Cold Saw/ C316AV-variable speed w/air vise $5,595.00 Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 11621 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 154 ,    Year = NEW ,     Make = TANNEWITZ ,     Model = TR2812VW   Ad #: 154 Year: NEW Make: TANNEWITZ Model: TR2812VW Equip. Type: Vertical Bandsaw Our Price: call FOB: Jenison, MI Phone: 704-660-8130 Standard Features: Infinitely variable blade speed Blade welder, grinder, shear Blade tension indicator carbide guide inserts 1/8-1" Chip blower Digital Blade speed indicator Rip fence Low voltage controls Chip brush Work light Ad Summary: Toolroom TANNEWITZ saw TR2812VW METAL WORKING BANDSAWS Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 11621 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 164 ,    Year = NEW ,     Make = KMT ,     Model = C 250   Ad #: 164 Year: NEW Make: KMT Model: C 250 Equip. Type: Cold Saw Our Price: call FOB: Portage, MI Phone: 704-660-8130 Standard Equipment: TEFC Motor Totally Enclosed Transmission 24 Volt Controls HSS Sawblade Built-in Flood Coolant All Safety Guards Operators Manual/Parts List Capacities 90 deg. round 3in, square 2.75in, rect.3.5x1.25in 45 deg-R. round 2.75in, square 2.25in, rect.2.25x2in 45 deg-L. round n/a, square n/a, rect.n/a Ad Summary: KMT Model C 250 Small Cold Saw: voltage 220/1 only Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 11621 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 155 ,    Year = NEW ,     Make = TANNEWITZ ,     Model = TR4014W   Ad #: 155 Year: NEW Make: TANNEWITZ Model: TR4014W Equip. Type: Vertical Bandsaw Our Price: call FOB: Jenison, MI Phone: 704-660-8130 Standard Features: Work Light Blade Cleaning Brush Low Voltage Controls Chip Blower Rip Fence Ad Summary: TANNEWITZ TR4014W METAL WORKING BANDSAWS Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 10454 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 165 ,    Year = NEW ,     Make = KMT ,     Model = C 370 /A V   Ad #: 165 Year: NEW Make: KMT Model: C 370 /A V Equip. Type: Cold Saw Our Price: call FOB: Portage, MI Phone: 704-660-8130 Features: The C 370 Series features rugged heavy duty vertical column circular sawing machines with saw frame swiveling capability for mitering. Model C 370 Completely manual operation. Model C 370 AV -Manual sawing operation with quick clamping of air vise. The vertical column construction provides extremely stable saw frame guidance and stability, with vibration free sawing! The machine can operate in a conventional 90° cutoff mode for conventional sawing, and with a simple turn of a locking lever, the saw frame can be swiveled to any desired angle up to 45° left or 60° right for miter sawing. The mitering device carries a highly visible scale, and comes equipped with a preset stop for accurately returning to zero Equipped with: Heavy Duty Drive, TEFC Motor 24 Volt Controls Totally Enclosed Transmission Electricals to NFPA-79 Electrical Standards HSS Sawblade Full coolant System Operators Tools All Safety Guards Ad Summary: C 370 Series features rugged heavy duty vertical column circular sawing machines Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 11629 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 153 ,    Year = NEW ,     Make = TANNEWITZ ,     Model = TR2012VW   Ad #: 153 Year: NEW Make: TANNEWITZ Model: TR2012VW Equip. Type: Vertical Bandsaw Our Price: call FOB: Jenison,MI Phone: 704-660-8130 Standard Features: Infinitely variable blade speed, Blade welder, grinder, shear, Blade tension indicator, carbide guide inserts 1/8-1", Chip blower, Digital Blade speed indicator, Rip fence, Low voltage controls, Chip brush, Work light Ad Summary: Toolroom TANNEWITZ SAW TR2012VW METAL WORKING BANDSAWS Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 10429 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 161 ,    Year = NEW ,     Make = KMT ,     Model = C315/350   Ad #: 161 Year: NEW Make: KMT Model: C315/350 Equip. Type: Cold Saw Our Price: call FOB: Portage, MI Phone: 704-660-8130 Standard Equipment: TEFC Motor Totally Enclosed Transmission 24 Volt Controls HSS Sawblade 12" included Built-in Flood Coolant All Safety Guards Operators Manual/Parts List Accessories: AC100 Freestanding Roller Conveyor 12” wide x 5’ long, 1000 lb. AC101 Freestanding Roller Conveyor 12” wide x 10’ long, 2000 lb. AC125 Custom infeed roller conveyor 12” wide x 6’ long, with cover plates between rollers, coolant return through, micro-adjustable legs, mounted to machine AC103 Additional 6’ section for above conveyor AC123 Custom outfeed roller conveyor with built in measuring system, 12” wide x 6’ long, with cover plates between rollers, coolant return through, micro-adjustable legs, mounted to machine AC105 Additional 6’ section for above conveyor AC106 Vertical side guide rollers for custom conveyors, pair of 2 Ad Summary: KMT Model C315/350 Cold Saw;please specify exact voltage! Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 11469 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 156 ,    Year = NEW ,     Make = TANNEWITZ ,     Model = TR4012VW   Ad #: 156 Year: NEW Make: TANNEWITZ Model: TR4012VW Equip. Type: Vertical Bandsaw Our Price: call FOB: Jenison, MI Phone: 704-660-8130 Standard Features: Infinitely variable blade speed Blade welder, grinder, shear Blade tension indicator carbide guide inserts 1/8-1" Chip blower Digital Blade speed indicator Rip fence Low voltage controls Chip brush Work light Ad Summary: TANNEWITZ TR4012VW METAL WORKING BANDSAWS Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 10506 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 144 ,    Year = NEW ,     Make = Tannewitz ,     Model = TR 18   Ad #: 144 Year: NEW Make: Tannewitz Model: TR 18 Equip. Type: 18" Vertical Bandsaw Our Price: call FOB: Jenison,MI Phone: 704-660-8130 Features: Rugged cast iron frame eliminates deflection & vibration for precise cutting Infinitely variable speed for all types of materials Hand wheel controlled speed changes Speed changes while in operation w/o stopping or w/o pulley changes Maintenance free air pumps to remove chips @ the cutting point Machine light Rubber tires for better tracking Ad Summary: TR 18" Vertical Bandsaw Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 10569 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 143 ,    Year = NEW ,     Make = Tannewitz ,     Model = TR14   Ad #: 143 Year: NEW Make: Tannewitz Model: TR14 Equip. Type: 14" Vertical Bandsaw Our Price: call FOB: Portage, MI Phone: 704-660-8130 Features: Rugged cast iron frame eliminates deflection & vibration for precise cutting Infinitely variable speed for all types of materials Hand wheel controlled speed changes Speed changes while in operation w/o stopping or w/o pulley changes Maintenance free air pumps to remove chips @ the cutting point Machine light Rubber tires for better tracking Ad Summary: TR14" Vertical Bandsaw : Voltage 115/220/1 phase only Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 10266 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 145 ,    Year = NEW ,     Make = Betenbender ,     Model = many   Ad #: 145 Year: NEW Make: Betenbender Model: many Equip. Type: Quality Hyd. Shears Our Price: call FOB: Shipping Point Phone: 704-660-8130 Betenbender Features: Controls: Push button and switch controls are at your fingertips. The fully guarded, 2-position 110V footswitch lets you interrupt the cutting stroke at any point in its cycle. Easy Material Handling: A sturdy backgauge and rake angle adjustment minimizes twist and distortion, making it possible to increase the rake for cutting heavier stock and extend maximum capacity of the machine. A 4’ squaring arm with recessed scale makes for fast, easy measurement. Modified High Carbon, High Chrome Reversible Knives: Provide four separate edges for clean, burr-free cuts and long blade life. Easy blade gap adjustment means precise cuts for a wide variety of materials. Electrical System: Meets NFPA79 and construction requirements of the ANSI B11.4. All machines have disconnect switches, magnetic starters, 110/120 volt controls, and 220/460 voltages. Backgauges: A Betenbender Shear is capable of shearing 1/8" (10 gauge) material to the following tolerance: Dimension - The width of the off-cut portion of the work- piece is within ±0.005 inch of the backgauge setting. AMERICAN MADE It takes a shear that can make a razor-sharp cut time after time. Betenbender overdriven and underdriven hydraulic shears are designed to do exactly that. Choose from a family of eight different models: 1/8"(10GA), 3/16", 1/4", 3/8", 1/2", 5/8", 3/4" & 1". Ad Summary: AMERICAN MADE HYDRAULIC SHEARS Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 10266 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 146 ,    Year = NEW ,     Make = Betenbender ,     Model = Many   Ad #: 146 Year: NEW Make: Betenbender Model: Many Equip. Type: Hydraulic Press Brake Our Price: call FOB: Shipping Point Phone: 704-660-8130 If it says Betenbender on the nameplate, you’ve got a Hydraulic Press Brake that will do the job. It’s versatile, accurate, rugged, easy to operate and easy to maintain. That’s the way Betenbender makes its Press Brakes. Whether you bend plastic or steel, there’s a Betenbender Hydraulic Press Brake to match your needs, ranging from the 50-ton model to the 300-ton. No matter the size, each machine features convenient operation for maximum output, ease of maintenance for maximum productivity. Betenbender goes the extra mile to build a Press Brake that works hard, works accurately, and stays that way for years to come. When your name goes on the finished product, so does your reputation. We feel the same way. Compare features. Compare results. You can count on first-class American technology, rugged durability, versatility and economy when it’s manufactured by Betenbender. Ad Summary: Bartenbender Hydraulic Press Brake Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 12299 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 138 ,    Year = NEW ,     Make = Max ,     Model = Model: RF-40S2F   Ad #: 138 Year: NEW Make: Max Model: Model: RF-40S2F Equip. Type: Geared Head Drill Press Our Price: call FOB: Jenison, Mi Phone: 704-660-8130 Features: Three power down feeds: 0.004", 0.007" and 0.01" Heavy duty design allows a variety of precision drilling applications Built-in spindle lock Head tilts left or right Easy table adjustment Large production table and T-slotted base Easy-to-read internal depth gauge Ad Summary: 20" Geared Head Drill Press with spindle power down feed Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 12026 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 131 ,    Year = NEW ,     Make = Birmingham ,     Model = H-5214   Ad #: 131 Year: NEW Make: Birmingham Model: H-5214 Equip. Type: 52" Hydraulic Shear Our Price: call FOB: El monte, CA Phone: 704-660-8130 Features: Heavy duty braces provide rigid support for the hydraulic system Integrated 3HP hyrdraulic pump and tank unit mounted under the shear bed Safety overload protection Spring actuated holdown bar to ensure even pressure Remote foot switch control for single stroke or continuous operation The upper arm returns to the top of the stroke from any position if the operator removes his foot from the guarded foot switch Ad Summary: 52" Compact Hydraulic Shear Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 12026 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 135 ,    Year = NEW ,     Make = MAX ,     Model = MD-18   Ad #: 135 Year: NEW Make: MAX Model: MD-18 Equip. Type: Milling/Drilling Machines Our Price: call FOB: Jenison, Mi Phone: 704-660-8130 Features: Extra large work table Hinged belt cover allows faster speed changing Heavy duty tapered roller bearings support the spindles 360o head swivel Work lamp Optional accessories: Cabinet stand Table power feed attachment Ad Summary: Model: MD-18 Milling/Drilling Machines Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 12128 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 134 ,    Year = NEW ,     Make = MAX ,     Model = MD-15   Ad #: 134 Year: NEW Make: MAX Model: MD-15 Equip. Type: Milling/Drilling Machines Our Price: call FOB: Jenison, Mi Phone: 704-660-8130 Features: Extra large work table Hinged belt cover allows faster speed changing Heavy duty tapered roller bearings support the spindles 360o head swivel Work lamp Optional accessories: Cabinet stand Table power feed attachment Ad Summary: Model: MD-15 Milling/Drilling Machines Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 12128 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 136 ,    Year = NEW ,     Make = MAX ,     Model = MD-18PF"Power Down Feed"   Ad #: 136 Year: NEW Make: MAX Model: MD-18PF"Power Down Feed" Equip. Type: Milling/Drilling Machines Our Price: call FOB: Jenison, Mi Phone: 704-660-8130 Features: Extra large work table Hinged belt cover allows faster speed changing Heavy duty tapered roller bearings support the spindles 360o head swivel Work lamp Heavy duty power downfeed with manual fine feed. The range of downfeeds are 0.004", 0.007" and 0.01" Optional accessories: Cabinet stand Table power feed attachment Ad Summary: Model: MD-18PF Milling/Drilling Machine with power down feed or without PF Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 12260 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 125 ,    Year = NEW ,     Make = Tannewitz ,     Model = UE-916   Ad #: 125 Year: NEW Make: Tannewitz Model: UE-916 Equip. Type: HORIZONTAL BANDSAW Our Price: call FOB: Portage , MI Phone: 704-660-8130 Features: Double row ball bearing support blade guides Coolant through the blade guide Blade is fully guarded regardless of blade guide position Blade brush self-powered Large handhwheel and built-in gauge for easy blade tensioning Removeable chip tray for quick clean-up Quick positioning vise with fully adjustable jaws swivels at 45o Fully adjustable hydraulic downfeed with separate on/off valve Ad Summary: Tannewitz 9X16 HORIZONTAL BANDSAW: Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 10942 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 124 ,    Year = NEW ,     Make = Tannewitz ,     Model = UE-712   Ad #: 124 Year: NEW Make: Tannewitz Model: UE-712 Equip. Type: H/V METAL CUTTING BANDSAW Our Price: call FOB: Jenison, MI Phone: 704-660-8130 Features: Vertical work table Hydraulic feed system with automatic shutoff Built-in coolant system Roller cabinet with built-in chip tray Heavy cast iron bow and bend Hardened and ground worm gears Blade brush self powered Ad Summary: 7X12 HORIZONTAL, VERTICAL AND SWIVEL METAL CUTTING BANDSAW Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 10794 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 108 ,    Year = New ,     Make = Servo ,     Model = 200-140 / 150   Ad #: 108 Year: New Make: Servo Model: 200-140 / 150 Equip. Type: Power Feed Our Price: call FOB: Phone: 704-660-8130 Servo Power Feed Higher Torque than competitive models. Controlled feed rate. Smooth finish, regulated control eliminates most second finish cuts. Automatic shutoff at the end of a cut with electric limit switches. Superior thermal characteristics for higher loading. Easy installation with mounting hardware kits for more than seventy mills. Trouble-free performance, lightweight motor minimizes table deflection problems; safety clutch with limit switch design eliminates damage to lead screw or feeds if a hard stop is encountered. Ad Summary: Servo Power Milling Table Feeds Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 11840 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 102 ,    Year = NEW ,     Make = Morrison ,     Model = NC -3   Ad #: 102 Year: NEW Make: Morrison Model: NC -3 Equip. Type: Keyseater Our Price: call FOB: KY Phone: 704-660-8130 Featuring: Cuts keyways in stainless or other exotic materials Features keyboard input and a clear numerical read out Adjustable speed drive unit slows the surface speed of the M-2 high speed cutter Handle on reducer changes speeds easily Auto feed eliminates pushing a feed bar Auto stop cuts feed off for a given depth Auto relief backs work away from cutter on the up-stroke eliminating drag Cutter bits are interchangeable and cutter bar does not need to be changed Used single tooth high speed tool steel cutters Auto centering eases operation and can be used for multiple jobs of 2 or more pieces, auto centering the next piece Machine will develop approx. 8 tons of cutting pressure at cutting edge of cutter (when hyd. set at max. pressure) Approx. dimensions - 84 x 36", hyd. system 41 x 43" Standard Accessories: Magnetic switch with over and under voltage protection Start, stop and jog 110 volt pushbutton station Automatic lubrication Automatic table feed Hydraulic unit centering V and 2" cutter bar Ad Summary: D. C. MORRISON 3" NC KEYSEATER Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 12570 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 90 ,    Year = NEW ,     Make = Tannewitz ,     Model = HBS1018M   Ad #: 90 Year: NEW Make: Tannewitz Model: HBS1018M Equip. Type: Manual Band Saw Our Price: call FOB: MI Phone: 704-660-8130 Featuring: Mitre cuts up to 45 degrees Hydraulic feed system Capacity at 90 or 45 deg. - 10" round, 10x10" square, 16x10" rectangular Blade wheels - 12.5" dia. flanged cast iron Saw blade - 1" wide x 129.25" Vise - 12" wide x 5" high Roller bearings and carbide guides Cast iron table Cast iron wheels Blade brush Automatic shut-off Adjustable length stop Coolant, 7 gallon cap., 1/8 HP Control panel with 110 volt controls Saw frame, 3/8" steel plate and cast iron Telescoping blade guard Work stop gage location stop gage standard Floor space - 64L x 24W x 44H" approx. Net weight - 1,000 lbs. Ad Summary: TANNEWITZ 10" HORIZONTAL MITER MANUAL CUT-OFF BAND SAW MODEL #HBS1018M Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 12570 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 89 ,    Year = NEW ,     Make = Tannewitz ,     Model = HBS12AVS   Ad #: 89 Year: NEW Make: Tannewitz Model: HBS12AVS Equip. Type: Automatic Band Saw Our Price: call FOB: MI Phone: 704-660-8130 Featuring: Variable speed control Automatic cutting Automatic stock feed Pre-set counter with auto. shut-off Auto blade break shut-off Automatic frame tilt Hydraulic feed system Blade wheels - 18" dia. flanged cast iron Saw blade - 1" wide x 150" Vise - 9.5" wide x 24.5" high Roller bearings and carbide guides Cast iron table Cast iron wheels Blade brush Automatic shut-off Adjustable length stop Coolant, 7 gallon cap., 1/4 HP Control panel with 110 volt controls Saw frame, 3/8" steel plate and cast iron Telescoping blade guard Work stop gage location stop gage standard Ad Summary: TANNEWITZ 10" HORIZONTAL MITER MANUAL CUT-OFF BAND SAW MODEL #HBS1018M Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 10590 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User

Mouseover Thumbnail to Enlarge FOR SALE:     Ad # 66 ,    Year = NEW ,     Make = Summit ,     Model = 20-4 x 80   Ad #: 66 Year: NEW Make: Summit Model: 20-4 x 80 Equip. Type: Engine Lathe Our Price: Call FOB: OK Phone: 704-660-8130 Featuring: American designed, European crafted Fifteen (15) spindle speeds for wide range of RPM from 11.5-1400 4 way rapid traverse Single lever control for feeds and rapids All geared headstock - gears from Cr-Ni steel hardened and ground Heavy duty supported spindle running in high precision angular contact thrust bearings and straight roller radial bearings Spindle drive is through multi-disk clutches for forward and reverse rotation INDUCTION HARDENED AND PRECISION GROUND BED AND CROSS SLIDE WAYS "T" slotted tool post Forced feed lubrication to headstock, carriage and bedways Cross feed and threading safety interlock Feed reversing at apron Machine components from heavily ribbed castings for maximum rigidity Cuts most American and Metric threads without change gears Standard taper turning attachment capable of +/- 10 degrres up to 15.75" lengths. Separate dust tight electrical cabinet and with main disconnect switch Large capacity gap Approx. dimensions - 154L x 48W x 60"H Approx. net weight - 7,200 lbs Standard Accessories: "T" slotted top slide Full length rear chip and coolant guard Steady rest with roller jaws, approx 1/2" to 6-1/8" Follow rest with plain tip jaws, approx. 1/2" to 7-7/8" 12" dia. 3 jaw universal cast iron chuck 19-5/8" dia. 4 jaw independent cast iron chuck Taper attachment, +/- 10 deg., 15-3/4" length Carriage stop Work light Coolant system Apron mounted emergency stop Thread (INCH) chasing dial Motors for 220/440 volts, 3 phase, 60 Hertz Painted Blue and Gray Manual One set of maintenance tools FOB Oklahoma City, OK Ad Summary: SUMMIT LATHE MODEL # 20-4 x 80 Featuring: American designed, European crafted, Fifteen (15) spindle speeds for wide range of RPM from 11.5-1400, 4 way rapid traverse, Single lever control for feeds and rapids, All geared headstock - gears from Cr-Ni steel hardened and ground Purchase Information To Inquire about this machine contact: NetMachinery 704-904-9123 Or Click Request more information This Ad Has Been Viewed 13281 Times. Add/Remove from Checklist Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User