Home   |   Contact Us   |   About Us   |   Email NetMachinery  |   Tel: 704-904-9123


Home > NetMachinery Equipment Listings

User Search

Your search results (if any) appear below in groups of 75 for each section.

Manual Lathes

We found 1 matching ad. Now displaying the final ad.

FOR SALE: Year - Make - Lehman Model - Hydratrol 32
Mouseover Thumbnails to Enlarge


Price: $27995.00 USD   
Category: Heavy Duty Large Lathe 24in. & over swing
Capacity: 32"/35" x 30' Lehman Engine Lathe

Ad # 16129

Add/Remove from Checklist
Year:
Make: Lehman
Model: Hydratrol 32
Condition: Good
Electrical: 460/3Phase

Machine Status:Can be powered up
Shipping Info:We can load
Weight:
Dimension: L x W x H

Machine Location:
City: On Request
State: Connecticut
Country:
USA

Price:

$27995.00 USD


Click Here to Print Quote
General Description
  • Lehman Machine Company Hydratrol Engine Lathe
    Serial number C607
    32" swing x 30' centers
    Can swing 35"
    Two carriages
    Inch threading
    32" 4 jaw chuck
    Tailstock
    40 / 20 HP
    2-1/4" spindle hole
    440 volts, 3 phase
    Approx. 30,000 lbs overall
    F.O.B. Bridgeport, CT

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies

This Ad Has Been Viewed Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00620210-NA


24000

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

Automatic Screw Machines

We found 2 matching ads. Now displaying the remaining 2 ads.

FOR SALE: Year - 2011 Make - Tornos Model - Deco 13a
Mouseover Thumbnails to Enlarge


Price: $ USD   
Category: Swiss Type Automatic
Capacity: Tornos Deco 13a Swiss Type CNC Turning Center w/ SBF Robobar Feed, 201

Ad # 16243

Add/Remove from Checklist
Year: 2011
Make: Tornos
Model: Deco 13a
Condition: Excellent

Machine Status:Under Power
Shipping Info:
Weight:
Dimension: L x W x H

Machine Location:
City: On Request
State: Connecticut
Country:
USA

Price:

$ USD


Click Here to Print Quote
General Description
  • Tornos Deco 13a CNC Swiss Type Turning Center
    10 Axis
    New 2011

    (2) machines are available. Auction is for one machine. Theses are the actual photos of the machine in this auction

    Tornos Fanuc PNC-Deco CNC Control

    Robobar Bar Feeder Model SBF-216

    Sliding Head Stock - 10,000 RPM

    Tool Systems:
    -2 independent carrages with 5 positions
    - Motorization S2 (8,000 RPM) max. speed, 3 revolving tools on tool system (X2-Y2)

    End Working Attachment
    - 1 independent carriage with 4 positions

    Independent Opposite Spindle
    - 10,000 RPM
    - Adaptation for Schaublin collet type F20

    Counter-Operations
    - Post with 6 positions (3 end and 3 cross)

    Includes Chip Conveyor and coolant system and fire suppression system

    The tooling in the photos may not be included. I have an original list showing the options. Serious inquires only

    High pressure coolant tank available if both machines are purchased

    Located in a North East shop

    Feel free to inspect under power

    The machine is sold as is where is, inspections are encouraged

    Buyer is responsible to make sure that the machine is properly prepped for shipping.

    A rigger is required to removal and load onto a truck

    Overall length of the machine, chip conveyor and bar feed is 27' long. The bar feed alone is 15' 8"

    I can get reasonable shipping rates

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies

This Ad Has Been Viewed 1637 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00120240-NA


137500

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - 2014 Make - Tornos Model - Evo Deco 32
Mouseover Thumbnails to Enlarge


Price: $199,990.00 USD   
Category: Swiss Type Automatic
Capacity: Tornos Evo Deco 32 CNC Swiss Screw Machine, 2014

Ad # 16210

Add/Remove from Checklist
Year: 2014
Make: Tornos
Model: Evo Deco 32
Condition: Excellent

Machine Status:Under Power
Shipping Info:Rigging Fee Extra
Weight:
Dimension: L x W x H

Machine Location:
City: On Request
State: Connecticut
Country:
USA

Price:

$199,990.00 USD


Click Here to Print Quote
General Description
  • Tornos Evo Deco 32 /10 CNC Swiss Type Screw
    Machine
    Basic Specifications (use as a guide, subject
    to
    verification by inspection) Inspections are
    welcomes
    and encouraged

    New 2014
    10 axis
    Fanuc 31i-B5
    Robobar SBF-532 bar feeder
    8,000 RPM
    Sliding headstock - 10.23" travel
    C axis function for the headstock and counter
    spindle
    Motorization for rear platen, 8,000 RPM for
    up
    to 4
    rotation positions.
    Rotating part extractor w/ adjustable
    pneumatic
    ejector
    Buyer responsible for removal
    Sold as is where is as inspected

    Very nice running machine. No know issues.
    Ready to
    make chips!

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies

This Ad Has Been Viewed 4947 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00220230-NA


5%

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

Sawing Equipment

We found 1 matching ad. Now displaying the final ad.

FOR SALE: Year - Make - Hyd Mech Model - H-12A
Mouseover Thumbnails to Enlarge


Price: $14500 USD   
Category: Fully Automatic Horizontal Band Saw
Capacity: Hyd Mech H-12A Fully Automatic Horizontal Band Saw

Ad # 16228

Add/Remove from Checklist
Year:
Make: Hyd Mech
Model: H-12A
Condition: Good
Electrical: 230/3Phase

Machine Status:Can be powered up
Shipping Info:We can load
Weight:
Dimension: L x W x H

Machine Location:
City: On Request
State: Connecticut
Country:
USA

Price:

$14500 USD


Click Here to Print Quote

Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item   

General Description
  • Hyd MEch Automatic Horizontal Band Saw

    Model H-12A

    TECHNICAL SPECIFICATIONS: To be used as a guide.
    Subject to change by inspection

    CAPACITY FOR SQUARE: 12" x 12"

    CAPACITY FOR ROUND: 12" DIAMETER

    BLADE LENGTH: 13’6"

    BLADE WIDTH 1-1/4" OR 1"

    BLADE THICKNESS .042 OR .032

    BLADE SPEED (INFINITELY VARIABLE) 75-400 SFM

    BLADE GUIDES CARBIDE

    BLADE WHEEL DIAMETERS: 16"

    BLADE DRIVE: 5 HP

    HYDRAULIC DRIVE: 2 HP

    HYDRAULIC PRESSURE SYSTEM: 750 PSI

    HYDRAULIC TANK CAPACITY: 7.5 US GALLONS

    COOLANT TANK: 10.5 US GALLONS

    SHUTTLE STROKE: 0-40 SINGLE

    VISE CONTROL: HYDRAULIC

    TABLE HEIGHT: 31"

    MAXIMUM WORK LOAD: 6,000 LBS

    MACHINE WEIGHT: 4,400 LBS

    DIMENSIONS Approx. (W x L x H) 88" x 96" x 66"

    7' ROLLER CONVEYOR

    LOCATED IN BRIDGEPORT, CT 06607 FEEL FREE TO INSPECT
    UNDER POWER

    SOLD AS IS WHERE IS, VIDEO AVAILABLE, SERIOUS
    INQUIRES ONLY PLEASE

    WE CAN LOAD THE SAW ONTO YOUR TRUCK OR TRAILER FREE
    OF CHARGE


Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 4175 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00520230-NA


less 10

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

Grinding Machinery

We found 3 matching ads. Now displaying the remaining 3 ads.

FOR SALE: Year - 1993 Make - Moore Model - G-18
Mouseover Thumbnails to Enlarge


Price: $ USD   
Category: Jig Grinders
Capacity: Moore Tool CNC Jig Grinder, Model G-18, GE Fanuc Series O-M, Extr Grin

Ad # 16245

Add/Remove from Checklist
Year: 1993
Make: Moore
Model: G-18
Condition: Excellent
Electrical: 230/3Phase

Machine Status:Under Power
Shipping Info:
Weight:5000
Dimension: L x W x H

Machine Location:
City: On Request
State: Connecticut
Country:
USA

Price:

$ USD


Click Here to Print Quote
General Description
  • Moore Tool CNC Jig Grinder
    Model G-18
    1993
    GE Fanuc Series O-M
    Extra Grinding Heads plus the head on the machine now
    Table: 11" x 24"
    Roller bearings under table and saddle
    Located in Bridgeport, CT 06607
    Inspect under power
    Buyer responsible to prep for shipping
    We can load this machine onto your truck or trailer for free
    Sold as is where is, Inspections welcomed and encouraged
    I can get reasonable shipping rates

    Very nice running machine


Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies

This Ad Has Been Viewed 91 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00420240-NA


75000

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - 1983 Make - Okamoto Model - PRG-6
Mouseover Thumbnails to Enlarge


Price: $ USD   
Category: Surface Grinders
Capacity: Okamoto Rotary Surface Grinder, Model PRG-6, 24" Mag Chuck, One Owner,

Ad # 16246

Add/Remove from Checklist
Year: 1983
Make: Okamoto
Model: PRG-6
Condition: Excellent
Electrical: 230/3Phase

Machine Status:Under Power
Shipping Info:
Weight:
Dimension: L x W x H

Machine Location:
City: On Request
State: Connecticut
Country:
USA

Price:

$ USD


Click Here to Print Quote
General Description
  • Okamoto Rotary Surface Grinder (Horizontal Spindle)
    Model PRG-6
    Serial Number 1075
    New 1983
    Original One Owner!

    CATALOG SPECIFICATIONS: Use as a guide. Verify by inspection

    Diameter of magnetic chuck: 23.6" ( "concentric pole" fine-division electro-magnetic chuck)

    Max. swing : 29.5"

    Max. height, under 14" wheel: 7.87"

    Max. wheel size: 14"dia. x 1.5" width

    Grinding wheel motor: 10 HP

    Auto spindle downfeed: 0.0001 - 0.001 IPR

    Rapid feed: 11.2" IPM

    Hand feed: 0.02 IPR

    One graduation of dial: 0.0001"

    Max. angle (convex/concave) 3°

    Chuck speed (inf. Variable): 20 TO 150 RPM

    Table travel: 15.7" (max.)

    Table traverse rate: 0 - 15 FPM

    Table tilt: +/- 3°

    Hydraulic motor: 3 HP

    Table drive motor (DC): 3 HP

    Dimensions: 88" L/R x 108" F/B x 80" Tall

    Weight (approx.). 7,800 lb.

    Digital Read Outs

    Variable holding power with Neutrofier control for the electro-magnetic chuck

    Incremental downfeed

    Automatic grinding cycle with sparkout

    Infinitely variable table speeds and longitudinal feeds

    Power rapid wheel elevation Up/Down

    Coolant system with magnetic separator

    User's, parts, Instruction Manuals, Electrical diagrams

    Fuji Dust Collector

    Located in Bridgeport, CT 06607

    Feel free to inspect under power

    Sold as is where is

    We can load this machine onto your truck or trailer

    I can get reasonable shipping rates

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies

This Ad Has Been Viewed 89 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00420240-NA


50000

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

FOR SALE: Year - Make - Harig Model - 612
Mouseover Thumbnails to Enlarge


Price: $3975.00 USD   
Category: Surface Grinders
Capacity: Harig 612 Hand Feed Surface Grinder

Ad # 16211

Add/Remove from Checklist
Year:
Make: Harig
Model: 612
Condition: Good
Electrical: 230/3Phase

Machine Status:Under Power
Shipping Info:We can load
Weight:
Dimension: L x W x H

Machine Location:
City: On Request
State: Connecticut
Country:
USA

Price:

$3975.00 USD


Click Here to Print Quote
General Description
  • Harig Super 612 Hand Feed Surface Grinder

    Serial Number 4231

    6" x 12" magnetic chuck

    Set to run on 220 volts, 3 phase

    Extra wheel hubs

    Hub wrench's

    Diamond wheel dressers

    Work light

    I am selling this grinder for a local machine
    shop
    that closed their doors

    Spindle sounds good

    Feel free to inspect under power

    Located in Bridgeport, CT 06607

    We can load this machine onto your truck or
    trailer
    at no charge

    Skidding / prepping for shipping fee $250

    Sold as is where is

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies

This Ad Has Been Viewed 6729 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00220230-NA


2950

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

Gear Machinery

We found 1 matching ad. Now displaying the final ad.

FOR SALE: Year - Make - Gleason Model - 645
Mouseover Thumbnails to Enlarge


Price: $34995 USD   
Category: Gear Hobbers
Capacity: Gleason 645 Hypoid Gear Generator

Ad # 16061

Add/Remove from Checklist
Year:
Make: Gleason
Model: 645
Condition: Good

Machine Status:Can be powered up
Shipping Info:Rigging Fee Extra
Weight:55000
Dimension: L x W x H

Machine Location:
City: On Request
State: Connecticut
Country:
USA

Price:

$34995 USD


Click Here to Print Quote
General Description
  • Gleason Hypoid Gear Generator

    Model 645

    New 1979 - 1980

    This machine was just removed from service. The
    hoses, pipes / plumbing and electric's on the
    coolant tank and chip conveyor were disconnected.
    They were "bagged and tagged" In other words, they
    were labeled so that they can be put back together
    without the guess work.

    Includes misc. change gears

    Includes manuals and schematics

    Wired for 440 volts, 3 phase

    Machine is located in Bridgeport, CT 06607

    The machine weight is approx. 58,000 lbs. A rigger
    is required to load

    Machine is sold as is where is as inspected

    Below are catalog spec's. (To be verified by
    inspection)

    Outer Core: 14.22" , 14.05" , 14.88"
    Spiral Angle: 29.75", 30 Deg, 35 Deg.
    Cutter Diameter: 12", 16" , 18"
    Extreme Ratio: 10:1
    Root Angle Range: -8Deg. to 90Deg.
    Maximum Radial Setting: 10.50"
    Coarsest Pitch: 1.5 DP
    Full Depth: 1.25"
    Face Width Max.: 4.60"
    Index Range: 5-80 Inclusive
    Work Spindle :: Diameter of Taperhole at Large End
    6"
    Taper/Ft: 3/4"
    Taper/Depth: 6"
    Diameter of Hole thru Spindle: 5"
    Cutter Diameter: 9", 12", 16", 18"
    Work Head Setting: Offset Above Center 4 1/2"
    Offset Below Center: 4 1/2"
    Machine Center to Nose of Spindle: 23.5"
    Speed/Feeds: Cutter 19-167RPM
    Electrics: 460 Volts AC Motor and Controls
    Weight: 55,000 Lbs.
    Equipped With:
    Feeds Infinite Variable from 7 Second Per Tooth

    Coolant
    Hydraulics
    Chip Auger

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies

This Ad Has Been Viewed 6729 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


01120200-NA


32000

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

Miscellaneous Metalworking

We found 1 matching ad. Now displaying the final ad.

FOR SALE: Year - Make - Model - 20"
Mouseover Thumbnails to Enlarge


Price: $12750.00 USD   
Category: Miscellaneous / Other
Capacity: 20" Boring and Facing Head w/ Driver

Ad # 16224

Add/Remove from Checklist
Year:
Make:
Model: 20"
Condition: Excellent

Machine Status:Under Power
Shipping Info:
Weight:
Dimension: L x W x H

Machine Location:
City: On Request
State: Connecticut
Country:
USA

Price:

$12750.00 USD


Click Here to Print Quote

Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item   

General Description
  • 20" Boring and Facing Head
    Includes driver w/ No. 5 MT
    Located in Bridgeport, CT 06607
    Feel free to inspect
    Will prep for shipping
    Sold as is where is
    Very Nice condition

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 4120 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00520230-NA


10000

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

Sheetmetal/Pipe/Tube Bending, Shaping, Punching, Ironworkers

We found 1 matching ad. Now displaying the final ad.

FOR SALE: Year - 1982 Make - Nilson Model - S1
Mouseover Thumbnails to Enlarge


Price: $12995.00 USD   
Category: Multi-Slide: Forming Machines
Capacity: S1 Nilson Fourslide, Electric Clutch and Brake, 1982, Wire Forming Mac

Ad # 16195

Add/Remove from Checklist
Year: 1982
Make: Nilson
Model: S1
Condition:

Machine Status:
Shipping Info:Rigging Fee Extra
Weight:
Dimension: L x W x H

Machine Location:
City: On Request
State: Connecticut
Country:
USA

Price:

$12995.00 USD


Click Here to Print Quote
General Description
  • S1 Nilson Fourslide Wire Forming Machine
    1982
    Electric Clutch and Brake
    Nicest condition ever!! No hammer marks, No
    Heli-
    coils, No drilled and tapped holes, No Joke!
    Double gibs per slide
    Wear plates under each slide
    Insert cams
    (2) Vertical Motions (Form lifter and Stripper)
    Stock Check
    Cut-off
    Auto lube
    Vari-Speed motor
    Wire straightener
    Located in a Northeast shop under power
    Buyer's responsible for removal
    Sold as is where is

    I have (4) S1 Nilson Fourslides with electric
    clutch
    and brakes. This sale is for the (one) machine
    in
    the photo

    You will never find nicer, well kept machines
    like
    these

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies

This Ad Has Been Viewed 5489 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


01120220-NA


8000

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

Press Room Equipment

We found 1 matching ad. Now displaying the final ad.

FOR SALE: Year - Make - Minster Model - B1-16
Mouseover Thumbnails to Enlarge


Price: $4450.00 USD   
Category: OBI Presses
Capacity: Minster Model B1-16, 16 Ton Punch Press, Air Clutch/Brake

Ad # 16227

Add/Remove from Checklist
Year:
Make: Minster
Model: B1-16
Condition: Good
Electrical: 230/3Phase

Machine Status:Can be powered up
Shipping Info:
Weight:
Dimension: L x W x H

Machine Location:
City: On Request
State: Connecticut
Country:
USA

Price:

$4450.00 USD


Click Here to Print Quote

Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item   

General Description
  • Minster 16 Ton Punch Press

    Model B1-16

    Serial Number 13607

    Air Clutch And Brake

    1-1/2" Stroke

    1-3/4" Adjustment

    8" Shut Height

    400 SPM

    17" x 10" Bed

    Peterson Roll Feed

    Manuals

    This machine was in a shop that closed down. Nice
    running machine

    Located in Bridgeport, CT 06607

    Will load onto your truck or trailer free of charge

    Sold as is where is

    Feel free to inspect under power

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 12 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 4110 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

 
Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


00520230-NA


3500

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions

View Detailed Ads