Home   |   Contact Us   |   About Us   |   Email NetMachinery  |   Tel: 704-904-9123

Home > NetMachinery Equipment Listings > Grinding Machinery

Cylindrical Grinders (O.D. & I.D.)

This ad is maintained in a searchable database. This ad may have been modified or even deleted since this page was posted. To see the current ad with all of the details, please go here.

1100 lbs between centers
Ad Number: 15996
Year: 1988 Make: WMW Wemax Model: Sa6U x 2000
Machine Type: Condition: Good Price: 25990.00
20 x 80 Wemax Cylindrical Grinder
Serial Number 0909
New 1988
Model SA6U x 2000 (20 Swing x 80 Center)

Maximum Swing--20 in.
Maximum Grinding Length--80 in.
Grinding Wheel Size (dia x width x bore)-- 25 x 5 x 12 in/max
Wheelhead motor--15HP
Speed of Grinding Wheel--6,900-10,000 ft./min.
Swivel of Wheelhead-- +/- 45 degrees
Rapid infeed stroke of wheelhead--2 3/4 in.
Wheelhead infeed travel by hand--5 in.
Workhead Speed Range (10 step speeds)--11.2-355 RPM
Swivel of Workhead--90 degrees
Maximum Weight of Workpiece Between Centers--1,100 lbs.
Taper in workhead spindle--5 M.T.
Taper in tailstock sleeve--5 M.T.
Automatic infeed rate for plunge grinding-- .002-197 in/min.
Table traverse speed, infinitely variable--2-197 in/min.
Swivel of Table--14 degrees
Automatic infeed at table reversal (on dia.) --.00004 - .0024 in.
Connected Load (approximate)-- 18HP
Floor Space (approximate) width-- 89.5 in.
Weight of machine (approximate)-- 15,200 lbs

Standard Equipment:
-Electrical equipment for operation on 460V, 3 phase, 60 cycles; 115V control voltage
-Coolant attachment complete with electric pump, magnetic filter unit (needs repair) and coolant tank
-Set of splash guards
-Grinding wheel, balanced with wheel flange and extractor screw
-Set of motor pulleys for wheel speed of 6,900 - 10,000 ft./min
-Wheel dressing device (without diamond) mounted on tailstock #1 Morse Taper
-2 Steady Rests
-Set of wrenches
-1 Instruction Manual

Special Accessories Included with Machine
- Fine feed attachment with adjustable stop
-Tailstock with cylindrical compensation
-Table fixed stop (less gauges)
- Set of leveling shoes (12)
- Machine lamp (110 volt)

***Will need to be shipped via flatbed***