25" x 320"
|
Ad Number: 13421
|
Year: 1979 | Make: Tos | Model: SUS 63
|
Machine Type: | Condition: Good | Price: sold
|
Description: TOS Engine Lathe Model: SUS 63 ~p~ Age: 1979 ~p~ Ref #: 20629 Specifications: Maximum Swing Over Bedways 25" Maximum Swing Over Cross Slide 15.3" Distance Between Centers 320" Spindle Hole Diameter 3.2" Spindle Speeds: (22) 9-1120 RPM Spindle Nose (Camlock) D1-11 Cross Slide Traverse 16.5" Tool Rest Traverse 8" Dimensions of 4-Way Tool Post 8.5" x 8.5" Number Positions 4-Way TP Adjustable 24 Tailstock Quill Diameter 5.1" Tailstock Quill Travel 13" Tailstock Taper #6 MT Tailsock Max Thrust Force 7,720 lbs Maximum Work Piece Capacity 13,300 lbs Longitudinal Feeds: .0022-.0591 IPR Threads, Inch .125-56 TPI Threads, Metric .5-112 MM Threads, Whitworth .25-56 TPI Threads, Module .25-56 Threads, DP .5-112 Threads, CP .0015-3.5 Bed Width 23" Bed Height 32" Machine Dimensions (L x W x H) 400" x 69" x 55" Machine Weight 20,500 lbs EQUIPPED WITH: 20" 4-Jaw Chuck 4-Way Tool Post with 24 Adjustable Positions Inch/Metric/Whitworth/Module/DP & CP Threading Hardened & Ground Ways (1) 15" Capacity Steady Rest Follow Rest Leadscrew & Feed Shaft Support Coolant System Full Length Chip Pan 30 HP Spindle Drive Motor 220/380/440/3/60 Also Available at Additonal Cost: (2) 26" 4-Jaw Chucks (#20644 & #20645) (1) Adjustable Tool Post Milling Attachment (#20640) (1) Fixed Tool Post Mill Attachment (#20641) Excellent Condition! |
|