Home   |   Contact Us   |   About Us   |   Email NetMachinery  |   Tel: 704-904-9123

Home > NetMachinery Equipment Listings > CNC Lathes & Turning Centers

CNC Lathe w/sub Spindle or Live Tooling

This ad is maintained in a searchable database. This ad may have been modified or even deleted since this page was posted. To see the current ad with all of the details, please go here.

2650 lbs between centers
Ad Number: 15995
Year: 1985 Make: Okuma Model: LH-35N
Machine Type: Condition: Good Price: 24750.00
Okuma CNC Control Lathe:

Model LH35-N with OSP 5000LG CNC Control

Swing of Bed Ways—24” (610mm)
Swing Over Cross Slide—13.75” (350mm)
Distance Between Centers—78.75” (2000mm)

Allowable Weight on Spindle:
(including chuck)
- Chucking—660 lbs.
- Between Centers—2650 lbs.

Type of Spindle—ASA-A2-8
Diameter of Spindle Bore—3.530” (90mm)
Speed Range—20 to 2200 RPM
Range of Speeds—4 Ranges/Stepless
Spindle Motor DC—20/30 HP cont/30 min.

Diameter of Tailstock Quill—3.94” (100mm)
Taper of Quill—M.T. No. 5

Power Requirement—33 kva
Weight—12,800 lbs (5800kg)

Standard Machine Accessories:
20/30 HP DC continuous/30 min. duty rated main spindle motor
Foot pedal for chuck operation
Hydraulic tailstock
Foundation leveling jack screws and washers

Machine Includes:
1- MMTS-LH Conv-2000 Chip Conveyor
1- Steady Rest 1.57 to 7.08 diameter Roller Type
1- Steady Rest Roller Type 7.08-11.02
3- MMTS-LH-35-S-55 I.D. Toolholders
1- Drill Sleeve MT No. 3
1- Boring Bar Sleeve 1”
1- MMTS-HOS-15-0002 Kitagawa 15” Chuck Model HOS-15 3 jaw thru-hole hydraulic chuck with one set of soft jaws (3” diameter thru chuck) 3-1/16” I.D. draw tube (2,200 rpm maximum operating speed)
1- IGF System (conversational programming)
1- Floppy Disc Program Storage
1- Set of 3 Hard Jaws HB 15 A1
1- Chip Conveyor

Miscellaneous Sets of Soft Jaws and Turning Tools

Note: Has RS232 Port for DNC Linkup Capabilities