Home   |   Contact Us   |   About Us   |   Email NetMachinery  |   Tel: 704-904-9123

Home > NetMachinery Equipment Listings > CNC Lathes & Turning Centers

Turning Center 4 - 10 in. chuck

This ad is maintained in a searchable database. This ad may have been modified or even deleted since this page was posted. To see the current ad with all of the details, please go here.

Swing Diameter Above Cross Slide160 mm
Ad Number: 13020
Year: 1985 Make: Traub Model: 240-S-1
Machine Type: Condition: Good Price: 5995.00 reduced!!
1985 Traub Turning Center TND 360
Swing Dia. Above Bed 360 mm
Swing Dia. Above Cross Slide 160 mm
Center Distance 800 mm
Carriage Traverse, Longitudinal 810 mm
Carriage Traverse, Transverse 205 mm
Main Spindle:
Spindle Bore Dia. (max. bar dia) 60 mm
Spindle Nose Size A6/DIN 55026
Chuck Dia. 200 mm
Bearing Dia. (IN Front Bearing) 110 mm
Main Drive:
DC Motor With Reduction Gearbox:
Rating 27 Kw
Transmission Stages: 2
Speed Range: 7-3150 (Programable In Stepless Increments
Max. Speed, Stage one 800 RPM
Max Speed, Stage two 3150
Max. Torque:
Stage One :630 Nm
Stage Two: 150 Nm
Feed Drive:
Contouring Rate:
Rapid Traverse 10,000 mm/min
Feed 10,000 mm/min
Feed Thrust:
X Axis 5000 N
Z Axis 8000 N
Tool Carrier:
Number Of Tool Registers 8
External Tool Register: 25x25/110 Long
Internal Tools: Direct Register Bolted On Toolholders 20 Dia./25/32 MT 2/3/4
Indexing Time (Direction Logic)1 Sec. (1 Station)
Quill Dia. 85 mm
Quill Stroke (Hydraulic) 110 mm
Quill Thrust N Up To 9000
Quill Register MT5 / DIN229
Steady (Hydraulic,Self Centering)
Fixed Steady:
Dia. Capacity Range 12-55 mm
Traveling Steady:
Dia. Capacity Range 15-55 mm