User SearchYour search results (if any) appear below in groups of 75 for each section.
Manual Lathes
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 1976 Make - Monarch Model - 3020 x 240 |
---|
FOR SALE: Ad # 8982 , Year = 1976 , Make = Monarch , Model = 3020 x 240 |
|
Category: Heavy Duty Large Lathe 24in. & over swing
|
Capacity: 30 x 240 in
|
Ad #
8982 |
Year:
| 1976
|
Make:
| Monarch
|
Model:
| 3020 x 240
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Requires rigger
|
Weight: | 30,000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- 12" 4 jaw chuck on both tailstock & headstock
20 ft between center rapid traverse variable speed spindle spped control unit retrofited 0-350 rpm 4 in spindle bore Note: this machine carriage was modified for a spoecial application- compound, criosslide & tool post have been removed and thrown away. But this would be a great machine to mount a toolpost grinder on and use as a grinder/polisher for long rolls-roll grinding application.It was designed to hold very tight tolerances and is in great condition ...
|
Electrical Description |
|
Comments: |
- They are moving plant and need to sell it thats why its so cheap!!!!!!!
|
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
FOR SALE: Year - 91? Make - Una-Dyn Model - XTLR300 |
---|
FOR SALE: Ad # 8984 , Year = 91? , Make = Una-Dyn , Model = XTLR300 |
|
Category: Plastic Dryers
|
Capacity: crystallizer Dryer Hopper
|
Ad #
8984 |
Year:
| 91?
|
Make:
| Una-Dyn
|
Model:
| XTLR300
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 1200?
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Crystallizer Dryer Hopper
# 300
|
Electrical Description |
|
|
|
FOR SALE: Year - 83 Make - Universal dynamics/una-dy Model - DHD-4/G32 |
---|
FOR SALE: Ad # 8983 , Year = 83 , Make = Universal dynamics/una-dy , Model = DHD-4/G32 |
|
Category: Plastic Dryers
|
Capacity: # 300 dual heater dryer sytem
|
Ad #
8983 |
Year:
| 83
|
Make:
| Universal dynamics/una-dy
|
Model:
| DHD-4/G32
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 2000?
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 2 heater system
dryer/dehumidifier # 300 solid hopper # G32 type # Dryer Specifications: Manufacturer = Universal Dynamics Inc. Mfg. Date = 2004 Model No= DHD-4 with FN Micro-processor controller & low temperature drying package to allow drying of materials with low melt temperature ratings. SN: 250983.01-01-1104 Additional features: The system is equipped with (2) 300 lb. hoppers. Each hopper is equipped with an auto-loading and unloading system. Additionally, included with the system is a Uni-Dyn External Dual Ratio valve (p/n Y477063A) for mixing dyes or regrind materal while loading the hopper. Also includes Uni-Dyn Digital Dew Point monitor. Input Power= 460 VAC, 3 phase, 60 Hz., 37.a amps, 30.1 KVA Drying Air Circulation rate= 125 CFM Process Air Heater = Uni-Dyn, 460 VAC, 7.5 KW Hopper 1: Uni-Dyn 300 lb. Solid cone hopper. Model G32250983.06 Equipped with LS950E-300 Self contained Loader with SC Controls Equipped with Exair compressed air actuated Line Vac system for material extraction. Isolation valves for isolating the hopper from the drying loop. Hopper 2: Uni-Dyn 300 lb. Crystallizer dryer hopper with center rotating churn shaft. The hopper is equipped with it’s own hot air drying system for stand alone operation. Model: TXLR-300 SN: XTLR-30091009 Input power: 460 VAC, 3 phase, 60 Hz., 17.5 amps, 14 KVA Equipped with Exair compressed air actuated Line Vac system for material extraction. Equipped with Exair compressed air actuated Line Vac system for material loading. Isolation valves for isolating the hopper from the drying loop. Documentation: Complete package with schematics included. New desiccant: New desiccant supply included (45 lbs.) Dew-point Sensor: Spare included. (2) Dryer Filter: Spare included. (1) Summary: This unit is in good working condition and has relatively few operational hours with relation to the unit’s age. The unit has always been operated and stored in climate controlled areas of the plant, so the physical appearance is good. The system was designed for drying plastics, polymers and urethanes. It is capable of drying materials in each hopper simultaneously or individual hoppers can be isolated thus allowing quicker drying times. We would like to sell the system as a whole, but will consider separating the system since hopper 2 is equipped with it’s own hot air dryer. The unit is available for viewing by potential customers.
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 2004 Make - Remco Model - MSB 250T mini strip builder |
---|
FOR SALE: Ad # 8985 , Year = 2004 , Make = Remco , Model = MSB 250T mini strip builder |
|
Category: Miscellaneous Plastic Accessories & Equipment
|
Capacity: Extruder # TPB130x120
|
Ad #
8985 |
Year:
| 2004
|
Make:
| Remco
|
Model:
| MSB 250T mini strip builder
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Machine is designed to apply a rubber or plastic wall thickness in amounts of 2.2mm to 50.8mm in one application to mandrels. multi passes increase rubber gage to any amount desired.
specs general: currently set up for plastics but can be converted to do rubber by modification change of screw, ect. spin station-21.56"L dia x 51'H x 38 in W Extruder application station: 108"L x 59" H x 38" W mamdrel length capacity: 100" max mandrel dia -50 in travel speed-0-22 fpm spindle speed-0-75 rpm screw-2-1/2"dia 3 zone screw drive 30 HP
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1994 Make - Conair Model - JC5 |
---|
FOR SALE: Ad # 8961 , Year = 1994 , Make = Conair , Model = JC5 |
|
Category: Plastic Granulators
|
Capacity: Screen hole size = 1/4"
|
Ad #
8961 |
Year:
| 1994
|
Make:
| Conair
|
Model:
| JC5
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- conair granulator
Specifications: Model = JC-5 SN: R7363 Mfg. Date = 1994 Screen hole size = ¼” Input power = 460 VAC, 3 Phase, 60 Hz. Summary: This unit is in good working condition and has always been stored/operated in climate controlled conditions. It was us for granulating soft polymer materials.
|
Electrical Description |
|
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|