User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 1978 ? Make - Hitachi Seiki Model - 4D-4NE |
---|
FOR SALE: Ad # 11046 , Year = 1978 ? , Make = Hitachi Seiki , Model = 4D-4NE |
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: 10" chuck slant bed lathe
|
Ad #
11046 |
Year:
| 1978 ?
|
Make:
| Hitachi Seiki
|
Model:
| 4D-4NE
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 9000
|
Dimension: L x W x H | 8' x 4' x 5' |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Control: Fanuc System 5T
Swing: 22.8" Length: 24" Chuck: 10" dia High Quality Buck Chuck Spindle Bore: 2-7/8" diameter Spindle Speeds 20 -3150 RPM Spindle drive: 15 hp 12 Station Turret RS232 cable wired into cotrol box to program offline! All Tooling included with this lathe All Documents included
|
Electrical Description |
|
|
|
We found 20 matching ads. Now displaying the remaining 20 ads.
FOR SALE: Year - ? Make - Hardinge Model - DSM-59 |
---|
FOR SALE: Ad # 14929 , Year = ? , Make = Hardinge , Model = DSM-59 |
|
Category: Second Operation
|
Capacity:
|
Ad #
14929 |
Year:
| ?
|
Make:
| Hardinge
|
Model:
| DSM-59
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 1200
|
Dimension: L x W x H | 5' x 3' x 4' |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Hardinge # DSM-59 second operation lathe
SPECIFICATIONS:std specs below-please verify actual machine. SPINDLE CAPACITY WITH ROUND 5C COLLETS 1- 1/16" HEXAGON 5C COLLETS ..... 7/8" SQUARE 5C COLLETS .. 3/4" STEP CHUCKS ............ 1-1/16" TO 6" JAW CHUCKS ........ 5" JAW CHUCKS THROUGH SPINDLE...... 1-5/32" SPINDLE NOSE........ HARDINGE TAPER LENGTH OF BED ............ 36" SWING OVER BED .......... 9" TRAVEL OF DOUBLE TOOL CROSS SLIDE.. 3-3/4" TRAVEL OF TURRET SLIDE ........ 4" DIAMETER OF TURRET HOLES .... 5/8" VARIABLE SPINDLE SPEED RANGE : 230 TO 3500 R.P.M. APPROXIMATE WEIGHT ....................... 1,200 LBS. APPROXIMATE DIMENSIONS ................... 68"x 30"x 58" EQUIPPED WITH: - HEXAGON TURRET - DOUBLE TOOL CROSS SLIDE - PUSH BUTTON CONTROL FOR VARIABLE SPEED - MISCELLANEOUS TURRET TOOLING - TOOLBLOCK WITH TOOLHOLDER - SELF-CONTAINED COOLANT SYSTEM WITH PUMP MOTOR - 1 H.P. 3/60/220 VOLT TWO-SPEED MAIN DRIVE MOTOR AND ELECTRICAL CONTROLS
|
Electrical Description |
|
|
|
FOR SALE: Year - ? Make - Hardinge Model - DSM-59 |
---|
FOR SALE: Ad # 14929 , Year = ? , Make = Hardinge , Model = DSM-59 |
|
Category: Second Operation
|
Capacity:
|
Ad #
14929 |
Year:
| ?
|
Make:
| Hardinge
|
Model:
| DSM-59
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 1200
|
Dimension: L x W x H | 5' x 3' x 4' |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Hardinge # DSM-59 second operation lathe
SPECIFICATIONS:std specs below-please verify actual machine. SPINDLE CAPACITY WITH ROUND 5C COLLETS 1- 1/16" HEXAGON 5C COLLETS ..... 7/8" SQUARE 5C COLLETS .. 3/4" STEP CHUCKS ............ 1-1/16" TO 6" JAW CHUCKS ........ 5" JAW CHUCKS THROUGH SPINDLE...... 1-5/32" SPINDLE NOSE........ HARDINGE TAPER LENGTH OF BED ............ 36" SWING OVER BED .......... 9" TRAVEL OF DOUBLE TOOL CROSS SLIDE.. 3-3/4" TRAVEL OF TURRET SLIDE ........ 4" DIAMETER OF TURRET HOLES .... 5/8" VARIABLE SPINDLE SPEED RANGE : 230 TO 3500 R.P.M. APPROXIMATE WEIGHT ....................... 1,200 LBS. APPROXIMATE DIMENSIONS ................... 68"x 30"x 58" EQUIPPED WITH: - HEXAGON TURRET - DOUBLE TOOL CROSS SLIDE - PUSH BUTTON CONTROL FOR VARIABLE SPEED - MISCELLANEOUS TURRET TOOLING - TOOLBLOCK WITH TOOLHOLDER - SELF-CONTAINED COOLANT SYSTEM WITH PUMP MOTOR - 1 H.P. 3/60/220 VOLT TWO-SPEED MAIN DRIVE MOTOR AND ELECTRICAL CONTROLS
|
Electrical Description |
|
|
|
FOR SALE: Year - ? Make - Leblond Model - Regal |
---|
FOR SALE: Ad # 14931 , Year = ? , Make = Leblond , Model = Regal |
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: 16" x 54"
|
Ad #
14931 |
Year:
| ?
|
Make:
| Leblond
|
Model:
| Regal
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 4500
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Leblond Regal manual engine lathe #3B
15" swing over bed ,8" over c ross slide spindle bore: 1-3/4" chuck: 8" 3 jaw threading:english std. threading only taper attachment steady rest: 4" max CA toolpost w/ 5 holders RPM: 30-1200 220/3 some minor acc tooling included
|
Electrical Description |
|
|
|
FOR SALE: Year - 1983? Make - Clausing Model - 15" # 4 |
---|
FOR SALE: Ad # 14932 , Year = 1983? , Make = Clausing , Model = 15" # 4 |
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: 15"swing x 50"centers
|
Ad #
14932 |
Year:
| 1983?
|
Make:
| Clausing
|
Model:
| 15" # 4
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 4000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Clausing #4:15"swing manual engine lathe
15" swing over ways,9"over cross slide spindle bore: 2" chuck:9" dia 3 jaw & 12" 4 jaw toolpost QC CXA w/2 holders rpm: 30-1200 lots of acc.
|
Electrical Description |
|
|
|
FOR SALE: Year - 80's? Make - Turnmaster Model - 17"-5 |
---|
FOR SALE: Ad # 14418 , Year = 80's? , Make = Turnmaster , Model = 17"-5 |
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: 18" x 60"
|
Ad #
14418 |
Year:
| 80's?
|
Make:
| Turnmaster
|
Model:
| 17"-5
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 5000
|
Dimension: L x W x H | 7' x 4 ' x 5' |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Turnmaster 17"-5 engine lathe-heavy duty
18" swing over bed,11.75" over cross slide center dist: 60" gap bed design inch/metric threads:Inch, metric, and module threading spindle:D!-8 bore2-1/4" spindle: D1-8 10 hp main motor 12" 4 jaw chuck,10" 3 jaw chuck,face plate taper attachment Spindle RPM: 20-1600RPM 5" steady rest & follow rest drill chuck & live center Notes:coolant pump not working,DRO display box was removed-
|
Electrical Description |
|
|
|
FOR SALE: Year - 2001 Make - Turn Pro Model - 1440 |
---|
FOR SALE: Ad # 14846 , Year = 2001 , Make = Turn Pro , Model = 1440 |
|
Category: Tool Room Lathe 8in. to 14in. swing
|
Capacity: 13" x 40"
|
Ad #
14846 |
Year:
| 2001
|
Make:
| Turn Pro
|
Model:
| 1440
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 3000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Turn Pro 1340 Lathe #111-3115
6" -3 Jaw Chuck Steady Rest 85-2000 RPM 1"-1/2" Spindle bore Machine is very low hours.
|
Electrical Description |
|
|
|
FOR SALE: Year - 2008 Make - Knuth Model - DM1000A |
---|
FOR SALE: Ad # 14855 , Year = 2008 , Make = Knuth , Model = DM1000A |
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: 16" swing x 40" centers
|
Ad #
14855 |
Year:
| 2008
|
Make:
| Knuth
|
Model:
| DM1000A
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 3500
|
Dimension: L x W x H | 86”x38”x51” |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 2008 Knuth # DM1000A Manual Lathe
chuck: 10" 3 jaw & 12.5" 4 jaw DRO:Newall 2 axis spindle bore: 2-1/8" includes: face plate,follow rest toolpost w/4 holders motor: 7.5 HP Std MFg specs below: M 1000 A Lathe with 2 axis Digital Read Out positioning system • Large 2” spindle capacity • Powerful 7.5Hp motor, 220V, 3ph, 60Hz • Complete accessory set • Adjustable slip clutch eliminates tooth breakage caused by overload conditions • Foot brake for instant spindle stopping and shut off • Chuck guard with shut-off interlock (spindle will not operate unless closed) • Hardened and ground gears and shafts • Heavy-duty, large-sized bed, hardened and precision ground • Slide guide way adjustable through taper gibs • Gapped bed with bridge • Rear main spindle supported on tapered roller bearings and thrust bearings • Forward main spindle supported on double-row cylindrical roller bearings • Headstock runs in oil-bath • ASA D1-6 Camlock mount • Feed drive gears and apron run in oil-bath Standard equipment: • Position indicator • 3-jaw chuck Ø 10” • 4-jaw face plate chuck Ø 12.6” • Face plate Ø 20” • 4-station tool holder • Coolant system • Steady and follow rests • Splatter guard • Chuck guard • Foot brake pedal • Halogen work lamp • Reducing sleeve • 2 steady centers • Operating tools Optional Equipment: • 5pc Quick Change Tool Holder set “WB” Article #103195 Specifications DM 1000 A: Max. Turning diameter over bed: 16" Max. Turning diameter over slide: 9.5" Max. Turning diameter in gap: 23"Gap length:8" Max. Turning length: 40" Spindle Bore: 2" Spindle taper: MT 6 Spindle mount: Camlock ASA D1-6 Spindle speeds (12 increments): 30 - 1600 rpm Feeds: 115 total - Longitudinal: 0.0015-0.041" - Transversal: 0.0007-0.021" Thread: Metric: (30 pitches) 0.45 - 20 mm - Witworth inch: (35 pitches) 80 - 1 3/4 tpi - Module: (25 pitches) 0.25 - 10 mm - Diametrical: (30 pitches) 160 - 3 1/2 DP Travels: - Compound: 5.5" - Cross slide: 9.4" Tailstock quill: 5" travel Tailstock quill taper: MT 4 Compound slide swivel range: ± 45° Tailstock lateral adjustment range: ± 0.4" Square tool shank: ¾” x ¾” Dimensions (L x W x H): 86”x38”x51” Weight: 3,200 Lbs UL approval inspection sticker on side ,nice lathe was over 13K new!
|
Electrical Description |
|
|
|
FOR SALE: Year - 2005 Make - KBC Model - Grip-1440G |
---|
FOR SALE: Ad # 14847 , Year = 2005 , Make = KBC , Model = Grip-1440G |
|
Category: Tool Room Lathe 8in. to 14in. swing
|
Capacity: 14" x 40"
|
Ad #
14847 |
Year:
| 2005
|
Make:
| KBC
|
Model:
| Grip-1440G
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 2400
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- KBC Lathe 1440G # 6-269-006
45-1800 RPM-16speeds 6"-3 Jaw Chuck-D1-4 mount motor 3HP 230/3 voltage-2 speed swing over carriage:8.75 inch,over gap:20" tailstock:3MT hardened and ground gears and bed ways foot brake work light spash guard inch/metric threading Steady Rest Follower Rest coolant 4 way toolpost 1"-1/2" Spindle Bore mfg list price:7000.00 Machine is like New, very little use
|
Electrical Description |
|
|
|
FOR SALE: Year - ? Make - Clausing Colchester Model - 15" |
---|
FOR SALE: Ad # 14293 , Year = ? , Make = Clausing Colchester , Model = 15" |
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: 15" Swing x 50" Centers
|
Ad #
14293 |
Year:
| ?
|
Make:
| Clausing Colchester
|
Model:
| 15"
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 3000
|
Dimension: L x W x H | 96" x 48 x 60" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Clausing Colchester manual lathe 15" x 50"
center dist: 50" Swing: 15.25" over bed,9.5" over cross slide bed gap swing: 23" spindle: D1-6 nose speeds: 60-2000rpm motor HP: 7.5 tailstock: 4mt threads: 0.2-14mm metric (39) threads : 2-72 TPI(45) english imperial coolant pump taper attachment carriage stop chuck cover QC toolpost w/ 4 holders some tooling included-shown manuals nice lathe ready to go with tooling all feeds work note: some cosmetic damage on fiberglass cover on back side
|
Electrical Description |
|
|
|
FOR SALE: Year - ? Make - Acra Model - 1340 |
---|
FOR SALE: Ad # 14295 , Year = ? , Make = Acra , Model = 1340 |
|
Category: Tool Room Lathe 8in. to 14in. swing
|
Capacity: 13" Swing x 40" Centers
|
Ad #
14295 |
Year:
| ?
|
Make:
| Acra
|
Model:
| 1340
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 2000
|
Dimension: L x W x H | 74" x 30" x 44" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Acra turn 1340 Lathe
13" swing centers:40" 3 jaw chuck:6" 4 jaw chiuck:8" spindle rpm:45-1800 spindle bore: 1-3/8" motor: 3HP coolant foot brake gap bed inch/metric threading quick change toolpost Aloris BXA W/6 holders Note: nice machine,all feeds work...
|
Electrical Description |
|
|
|
FOR SALE: Year - 2007 Make - GMC Model - GT-1860DB |
---|
FOR SALE: Ad # 14281 , Year = 2007 , Make = GMC , Model = GT-1860DB |
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: 18" Swing x 60" Centers
|
Ad #
14281 |
Year:
| 2007
|
Make:
| GMC
|
Model:
| GT-1860DB
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 6000
|
Dimension: L x W x H | 108" x 41" x 58" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- GMC
Machine Standard Features and Equipment: •ISO 9001 certified •Large spindle bore 3-1/16” •Heavy Duty spindle D1-8 •One-piece solid cast iron machine base •Heavy Duty guideway width 11 13/16” •Heavy Duty main motor 7.5HP 12 spindle speeds from 24-1,600 rpm, speeds: 24/ 32/ 55/ 70 / 95/ 160 / 240/ 320/ 550 / 700 / 950 / 1,600 rpm •40 kinds of inch threads, and 41 kinds of metric threads •Threading and feeding rate change without changing gears •Automatic kick-out longitudinal carriage stop system •Spindle is balanced, hardened and precision ground •Spindle is supported at 3-point by high precision bearings •All gears and shafts are hardened and precision ground •Guideways induction hardened and precision ground •Automatic lubrication system in headstock and feed box GMC” Heavy Duty Gap Bed Lathes Specifications model # GT-1860DB Max. swing over bed 18” Max. length of workpiece: 60” Max. swing over cross slide: 11-5/16” Max. Swing in gap: 25 3/16” Width of Bed: 11 13/16” Effective length in gap to spindle 10 ¼” Effective length in gap to chuck jaws 3” Spindle bore-1/16” , D1-8 Taper of spindle center M.T.# 6 Spindle speeds 24-1,600 rpm / 12 steps 24/32/55/70/95/160/240/320/550/700/950/1600 rpm Longitudinal feeds 0.0012-0.0252 IPR, 42 kinds Cross feed-0.0006-0.0126 IPR, 42 kinds Inch threads 56-2TPI, 40 kinds 56,52,48,46,44,40,36,32,28,26,24,23,22,20,18,16,1 4 ,13,12, 11-1/2, 11, 10, 9,8,7,6-1/2, 6, 5-3/4, 5- 1/2, 5, 4-1/2, 4, 3-1/2, 3-1/4, 3, 2-7/8, 2-3/4, 2-1/2, 2-1/4, 2 Metric threads 0.4-14 mm , 53 kinds Module threads 0.4-7 mm, 32 kinds Diameteral pitch threads 32-4 DP , 32 kinds Max. travel of top slide 5” Max. travel of cross slide 12” 4-way tool post 1” x 1” Longitudinal leadscrew diameter / pitch1-1/2"/ / 4 PTI Max. weight of workpiece 800 LBS Max. travel of tailstock quill4-3/4” Diameter of tailstock quill 2-1/8” Taper of tailsotck quill center M.T. # 4 Main motor 5 HP, 220V/440V, 3 phase, prewired on 220V Standard Equipment for Lathes # GT-1860DB: •Taper turning attachment,& 5C collet closer •10” 3-jsw chuck with set reversible jaws •12” 6-jaw chuck with set reversible jaws •16” Face plate •10” drive plate •5 1/2” large steady rest •3” follow rest •Removeable gap •4-way tools post •Foot brake •Work light and coolant system •Manual Lube pump on apron for all guideways •Automatic kick-out longitudinal carriage stop system •Full length splash guard •dead center and (1) reducing sleeve •Thread chasing dial includes: tooling/holders shown & 6 jaw chuck shown plus 2 axis DRO acu-rite Note: this machine is loaded up!!!
|
Electrical Description |
|
|
|
FOR SALE: Year - 19? Make - Harrison Model - AA-13" |
---|
FOR SALE: Ad # 15823 , Year = 19? , Make = Harrison , Model = AA-13" |
|
Category: Tool Room Lathe 8in. to 14in. swing
|
Capacity: 13" swing x 25"centers
|
Ad #
15823 |
Year:
| 19?
|
Make:
| Harrison
|
Model:
| AA-13"
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Not Under Power
|
Shipping Info: | We can load
|
Weight: | 2500
|
Dimension: L x W x H | 4'x 2 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Harrison #AA13 centre lathe:13"swing x 25"centers
motor HP:3HP ;220/3 voltage swing over bed:13" vari-speed drive:35-3000rpm max coolant system spindle bore:1.5" QC toolpost w/holders taper attachement collet closer system w/many collets shown 3 jaw chuck:D1-4nose steady rest/follower metric/inch hand wheels change gears foot brake 2 axis digital readout Note:nice little loaded lathe!
|
Electrical Description |
|
|
|
FOR SALE: Year - 1972? Make - Leblond Regal Model - 15" regal |
---|
FOR SALE: Ad # 11364 , Year = 1972? , Make = Leblond Regal , Model = 15" regal |
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: 15" swing x 60" centers
|
Ad #
11364 |
Year:
| 1972?
|
Make:
| Leblond Regal
|
Model:
| 15" regal
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 4500
|
Dimension: L x W x H | 8 x 3 x 4 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Leblond regal 15"- Servo Shift Lathe
15" swing x 60" centers, 10" swing over ways RPM: 45-1800 2-1/8" spindle bore 8" -6 jaw chuck inch & metric threading w/ change gears included light Quick Change Toolpost-CXA W/ 1 holder ways look very good condition
|
Electrical Description |
|
Comments: |
|
|
|
FOR SALE: Year - 1989 Make - Okuma Model - 22 x 36 |
---|
FOR SALE: Ad # 9352 , Year = 1989 , Make = Okuma , Model = 22 x 36 |
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: 22 swing x 36 in centers
|
Ad #
9352 |
Year:
| 1989
|
Make:
| Okuma
|
Model:
| 22 x 36
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 4500
|
Dimension: L x W x H | 8 x 4 x 4 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- 22"swing over ways , 14" swing over cross slide
36" between centers 2-1/4" spindle bore 8" 3 jaw chuck 12" 4-jaw chuck 200-2200 RPM light steady & follower rests 2 axis DRO metric machine
|
Electrical Description |
|
Comments: |
|
|
|
FOR SALE: Year - 1992 &89 Make - Weipert / Weiler Model - W1003/6 |
---|
FOR SALE: Ad # 14009 , Year = 1992 &89 , Make = Weipert / Weiler , Model = W1003/6 |
|
Category: Heavy Duty Large Lathe 24in. & over swing
|
Capacity: Roll Lathes:40" swing x 19'5"ft centers
|
Ad #
14009 |
Year:
| 1992 &89
|
Make:
| Weipert / Weiler
|
Model:
| W1003/6
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | Rigging Fee Extra
|
Weight: | 25,000
|
Dimension: L x W x H | 30ft x 6 x 6 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 1992 & 1989 Ferdinand C. WEIPERT/Weiler:
Precission Roll Turning Lathes Model:W1003/6 Capacity:40"swing over bed,26.6"over crossslide Center distance:19'5"ft or 6 meters between centers spindle bore:4.5" main motor: 30HP upgraded to brushless DC motors in 200? for less maint and accuracy spindle RPM:4-900RPM infi-variable Spindle nose:DIN #55022 standard Size 11 workpiece weight:9,900 max without supports 18"-4jaw chuck in headstock-DIN#55022 size11nose follower rest:14" max dia with each machine has metric hand dials on crosslide & carriage DRO-digital readout display mounted on cross slide in/out of tool only-english or metric display rapid traverse on carriage:vari-spindle speed control using reastat:4.4-900 M/min tailstock:heavy duty with hyd.acc Includes:12" 4-jaw chuck in tailstock 3 tool holders included-each machine includes all manuals/drawings Notes:Equipped with special:vari speed drives on both spindle and carrage traverse for accurata adjustable fine finishing of part using infi-variable speeds/feeds Note:No threading capability on machines Note:(2)-Identical machines available 1989 & 1992 the 1989 is 380/3 voltage but includes a transformer to up voltage to 460/3 other is 460/3 Note:These machine have been very well maintained on a routine schedule, also includes many spare parts such as: motor brushes, belts, headstock & other bearings and more. Also leveling pad feet"fixators"are included for 1 machine only not both. These are a very high quality German made heavy duty precision lathe used to cut large heavy printing rolls currently will hold at least +-0.002" end to end of cut length full travel 20'
|
Electrical Description |
|
|
|
FOR SALE: Year - 1995 Make - Kingston Model - HL3000 |
---|
FOR SALE: Ad # 15477 , Year = 1995 , Make = Kingston , Model = HL3000 |
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: 21" swing x 10ft centers
|
Ad #
15477 |
Year:
| 1995
|
Make:
| Kingston
|
Model:
| HL3000
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | Rigging Fee Extra
|
Weight: | 7500
|
Dimension: L x W x H | 14'-9" x 3ft x 5 ft |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Kingston HL3000/K10 gap bed engine lathe
Swing over bed:21" over gap:28" gap width 6.750",over cross slide:18" Quick chage D size toolpost W/5 holders Chuck: 4 jaw 12": D1-8 camlock Spindle Bore:3.175" Wired 440/3 can be 220/3 Steady rest: 6" cap 2 speed tailstock 4MT Threading:inch/metric Max RPM:25-1500(12) 21″/28″ X 120″ KINGSTON #HL3000 GAP BED LATHE SWING OVER BED / 21″ SWING IN GAP / 28″ LENGTH OF GAP / 6-3/4″ SWING OVER CROSS SLIDE / 13-1/8″ HOLE THRU SPINDLE / 3-1/8″ SPINDLE SPEEDS — ( 12 ) / 25 TO 1500 RPM THREADS ———- ( INCH ) / 4 TO 56 TPI THREADS ———- ( METRIC ) / .5 TO 7 MM TAILSTOCK BORE / #4 M.T. MAIN DRIVE MOTOR/ 10 HP A.C. foot brake roll out back chip pans
|
Electrical Description |
|
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 80s Make - Weiler Model - 10" |
---|
FOR SALE: Ad # 11947 , Year = 80s , Make = Weiler , Model = 10" |
|
Category: Tool Room Lathe 8in. to 14in. swing
|
Capacity:
|
Ad #
11947 |
Year:
| 80s
|
Make:
| Weiler
|
Model:
| 10"
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 600
|
Dimension: L x W x H | 4 x 2 x 4 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Weiler
speed lathe 10" swing x 20" centers ? 8" 3 jaw chuck chuck guard 2-1/4" spindle bore speeds -step pulley belt changeable: 125,185, 250,510,710,1000,355,500,710,1400,2000,2800 RPM great for polishing parts
|
Electrical Description |
|
|
|
FOR SALE: Year - 1999 Make - Cadillac/yang Model - CL48150G |
---|
FOR SALE: Ad # 13067 , Year = 1999 , Make = Cadillac/yang , Model = CL48150G |
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: 19" swing x 72"centers
|
Ad #
13067 |
Year:
| 1999
|
Make:
| Cadillac/yang
|
Model:
| CL48150G
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | Requires rigger
|
Weight: | 4500
|
Dimension: L x W x H | 7 x 4 x 5 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Cadillac/yang gap bed engine lathe 19 x 60"
20" swing over ways,12" over cross slide 72" between centers no toolpost-might have a basic 4 way can throw in..verify dual metric/english dials & threading 2 axis sony DRO collet closer carriage stop steady rest 7" max follow rest 2 face plates 4 jaw chuck 10" only 2-1/8" spindle bore rpm: 32-1800 nice quality built machine! loading/rigging fee $ 600.00
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 2008 Make - Victor Model - 1440B |
---|
FOR SALE: Ad # 9108 , Year = 2008 , Make = Victor , Model = 1440B |
|
Category: Tool Room Lathe 8in. to 14in. swing
|
Capacity: 14 in swing x 40 in centers
|
Ad #
9108 |
Year:
| 2008
|
Make:
| Victor
|
Model:
| 1440B
|
Condition:
| Demo Machine
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 2000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Standard Equipment
6" 3-jaw chuck Steady/follow rest face plate halogen work light 8" 4-jaw chuck 4-way toolpost full length splash guard Quick Change toolpost W/ 5 holders set A little tooling included Features: Powerful 3HP single speed motor gives full power over all 12 speeds! High speeds 40-2,000RPM(12)speed ranges D1-4 Camlock spindle jog button for easy gear changes Quick change-english/metric gear box safety clutch for feed rod full length foot brake coolant pump Weight-1,936Lbs
Specifications Victor- 1440B Spindle bore 1.5" Swing over bed 14" Swing over gap 20" Between centers 39.5" Spindle RPM 40-2,000(12)steps Spindle nose D1-4 Horsepower 3HP Swing over cross slide 8-5/8" Threads Metric0.4-7.0mm x 32 kinds English 4-56TPI Bed width 8" crosslide travel 7" Coumpound travel 4" Tailstock Quill #3MT
|
Electrical Description |
|
Comments: |
- Machine was used only 3-4 months -looks good ! Ready to go!Nice little lathe cast base bed W/ foot brake : wired 220/3 phase: on a skid
|
|
|
FOR SALE: Year - 1982 Make - Andrychow Model - 18 x 80 |
---|
FOR SALE: Ad # 11803 , Year = 1982 , Make = Andrychow , Model = 18 x 80 |
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: 18 swing x 80" centers
|
Ad #
11803 |
Year:
| 1982
|
Make:
| Andrychow
|
Model:
| 18 x 80
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 5500
|
Dimension: L x W x H | 8 x 4 x 4 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 18" swing over bed , 11" over cross slide
80" center distance 2" spindle bore D1-6 chuck mount inch/metric threads QC toolpost w/ 6 holders 10" -3 jaw chuck 14" 4 jaw chuck spare chuck jaws centers steady rests (2) 10" & 5" both 18-1600 RPM
|
Electrical Description |
|
|
|
We found 10 matching ads. Now displaying the remaining 10 ads.
FOR SALE: Year - 2009 Make - Tennsmith Model - 52 |
---|
FOR SALE: Ad # 10904 , Year = 2009 , Make = Tennsmith , Model = 52 |
|
Category: Fabrication Specials
|
Capacity: 52" x 16ga stomp shear
|
Ad #
10904 |
Year:
| 2009
|
Make:
| Tennsmith
|
Model:
| 52
|
Condition:
| Demo Machine
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 950
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $2295.00 USD
|
|
General Description |
- Description:
These Tennsmith foot and air shears feature triaction, ground-alloy tool steel blades. Both the upper and lower blades have a 2° edge relief and the lower blade has an additional 1° face relief for maximum material penetration with minimum effort. Triaction blades help prevent material movement while shearing, prolonging blade life.
TENNSMITH shears have the most complete adjustment features of any sheet metal shear on the market. The lower shear blade is bed-adjusting and the upper blade is adjustable by means of a truss bar on the cutter head. The spring-activated hold down feet clamp the work piece securely in place and are easily adjustable to compensate holding pressure for light or heavy gauge material. There is ample clearance between the holddown feet and shear blades to allow good operator vision for line-of-sight cutting. The standard, double-locking back gauge, which features embossed scales and vernier wheels for fine adjustment, gives highly accurate readings.
Standard Features: Back gauge, front extension arms with stop, bevel gauge, and graduated side scales. Specifications: Model 52 Maximum shearing capacity, mild steel 16 ga. Maximum shearing capacity, stainless steel 20 ga. Maximum cutting length 52-1/4" Back gauge range 30" Front gauge range 37" Dimensions 61x36x42 Weight -950
|
|
|
FOR SALE: Year - 2009 Make - Tennsmith Model - SR48 |
---|
FOR SALE: Ad # 10854 , Year = 2009 , Make = Tennsmith , Model = SR48 |
|
Category: Fabrication Specials
|
Capacity: 4ft x 16ga w stand
|
Ad #
10854 |
Year:
| 2009
|
Make:
| Tennsmith
|
Model:
| SR48
|
Condition:
| Demo Machine
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 775
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $3,295.00 USD
|
|
General Description |
- SR48 slip roll w/ stand
4ft x 16ga
Pictured with stand
Tennsmith’s slip rolls combine precision-turned, ground and polished, high carbon steel rolls with heavy-duty, cast iron end frames, and welded steel base to make an accurate and durable forming tool. Convenient operating features include large roll adjusting screws, scales for speeding repeat set-up, and a front-mounted handle to lift the upper roll for material removal. Wire grooves are standard. All gears are fully enclosed for safety and protection from the elements.
Tennsmith's initial pinch slip roll, Model SR48, is a heavy-duty, affordable, production tool for forming curved parts and tubes in 16-gauge and lighter sheet metal. The SR48 roll has three gear-driven rolls that ensure even starting and feeding of capacity materials. The gearing features a 4:1 reduction ratio for ease of operation of heavy materials.
Model Number :SR48 Capacity (Mild Steel Gauge) 16 Max. Forming Length (in.) 49 Diameter of Rolls (in) 3 Min. Forming Radius (in.) 1-1/2 Wire Grooves (in.) 3/8, 1/2, 5/8 Gear Ratio : 4:1 Ship Weight (lbs) 775
|
|
|
FOR SALE: Year - 80's Make - Mazak Model - Micro Center V |
---|
FOR SALE: Ad # 10385 , Year = 80's , Make = Mazak , Model = Micro Center V |
|
Category: Chip Making Specials
|
Capacity: 32" x 16"
|
Ad #
10385 |
Year:
| 80's
|
Make:
| Mazak
|
Model:
| Micro Center V
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | Requires rigger
|
Weight: | 10,000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $8,995.00 USD
|
|
General Description |
- Control: Fanuc 6 M
Table: 32" x 16" Travels:X 30", Y 16", Z 8", 24-Position Automatic Tool changer Spindle: CAT 40 Tool Changer: 24 Stations Tool Changer: Dual (swing) Arm All Boxed Ways R232 cable wired into control box to program offline..
|
Electrical Description |
|
Comments: |
- Documents included
Some Tooling included Yes, it runs !!!!!!!No major issues , ready to make parts...!!
|
|
|
FOR SALE: Year - 1998 ? Make - Sharp Model - LMV |
---|
FOR SALE: Ad # 10196 , Year = 1998 ? , Make = Sharp , Model = LMV |
|
Category: Chip Making Specials
|
Capacity: 9 x 42" : 2 axis cnc knee mill w/ 3 axis readout
|
Ad #
10196 |
Year:
| 1998 ?
|
Make:
| Sharp
|
Model:
| LMV
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 3000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $9,995.00 reduced USD
|
|
General Description |
- 2 axis cnc with manual hand wheels
3 axis readout display 3 HP spindle motor Kurt air power draw bar variable speed type head-manual control. 9x 42 working surface Travels:x=30,y=12,knee travel-16" R-8 collets shown not included vise incl.,but no collets Auto Lube system.. spindle to column 6-3/4 to 18-1/2 Control:Anilem 3200mk -2 axis w/floppy & RS-232 PORT P/N # A7320002 S/N # 9020417018 all books with machine machine has approx 500 hrs on it very light work.. control is upgradable to a 3 axis...
|
Electrical Description |
|
Comments: |
- Great machine used for light duty work, ways look new
|
|
|
FOR SALE: Year - 1996 Make - Atrump Model - K3VL |
---|
FOR SALE: Ad # 9916 , Year = 1996 , Make = Atrump , Model = K3VL |
|
Category: Chip Making Specials
|
Capacity: 3 Axis CNC Knee Mill W/ manual hand wheels
|
Ad #
9916 |
Year:
| 1996
|
Make:
| Atrump
|
Model:
| K3VL
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 3000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $8,995.00 reduced USD
|
|
General Description |
- Control: Centroid M-15-5 S/N # 4110
3 axis CNC Knee Mill with manual/cnc Quill & hand wheels/cnc on table VS head-3HP Power knee feed 10 x 50 table coolant chip pan on base lube system has manual quill & cnc controlled quill manual/cnc table hand wheel feed Spindle:# 30 taper NST(heavy duty) X Travel: 31.5" Y Travel: 15" Z Travel: 4" Quill Complete manuals and drawing w/ software demo for this macxhine
|
Electrical Description |
|
Comments: |
- Mechanically & electrically, this machine is in very good shape - all it cut was plastics and aluminum. Centroid service/training available all over the USA
Machine control monitor went out and could not be replaced with OEM unit , so we retro-fitted a std monitor in front of old one, it works well...Also went through it from to to bottom-replaced head drive belt, adjusted/cleaned oiling system and had control sent into centroid for tunning up and referb...its ready to go --
|
|
|
FOR SALE: Year - 1990 Make - TRU-FAB/Wysong Model - P40-4 |
---|
FOR SALE: Ad # 9755 , Year = 1990 , Make = TRU-FAB/Wysong , Model = P40-4 |
|
Category: Fabrication Specials
|
Capacity: 40 Ton x 51" bed Hydraulic Press Brake
|
Ad #
9755 |
Year:
| 1990
|
Make:
| TRU-FAB/Wysong
|
Model:
| P40-4
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 5000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $6,995.00 reduced USD
|
|
General Description |
- 40 Ton x 51"bed, 56" between housings
manual back gage Hyd. pressure control knob Upper & lower Dies included as shown solid & segments Dual palm buttons Foot switch 17" throat top Die fine Adj wheel
|
Electrical Description |
|
Comments: |
|
|
|
FOR SALE: Year - 2010 Make - Victor Model - DCM-6 |
---|
FOR SALE: Ad # 9471 , Year = 2010 , Make = Victor , Model = DCM-6 |
|
Category: Fabrication Specials
|
Capacity: 24" vertical band saw w/ welder
|
Ad #
9471 |
Year:
| 2010
|
Make:
| Victor
|
Model:
| DCM-6
|
Condition:
| New
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 2000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $6,250.00 USD
|
|
General Description |
- Features
24" throat Machine frame is completely enclosed steel construction. Sturdiness design guarantees highest efficiency and quiet operation 4-way tilting heavy cast iron table with T-slot 2-speed transmission is powered by enclosed gears running in continuous bath of oil with infinite vari-speed control unit Convenient blade speed tachometer display Easy quick adjustable blade guides firmly support blade Upper / lower V-type saw guide with ground carbide inserts corresponding to blade size in use. Air nozzle blows off chips as in sawing Butt welder and annealing unit provides easy welding work Built-in work light Made in Tiawan-Quality machine!!!!!! specs -- DCM series low & high gear ranges Low 65-280 FPM High 400-1,640 FPM varable speed in ranges 2HP motor 5/8 in max wide blade-comes with machine table size: 24 x 20 t-slot table tilt table CAPACITY 01) Throat capacity: 23.625” 02) Max. thickness: 11.81” 03) Table size: 23.50” x 19.50” (front table) / '8.63” x 19.50” (rear table) 04) Table inclination (4-way): 15º C. SAW BLADE 05) Speed: Low 65 ~ 280 fpm / High 400 ~ 1,640 fpm (98 ~ 2,300 fpm optional high speed) 06) Length: 156-5/16” 07) Width: 1/8” ~ 5/8” D. BUTT WELDER 08) Butt welder capacity: 1/8” ~ 5/8” E. POWER 09) Main motor: 2 HP 3 Phase F. WEIGHT & DIMENSIONS 10) Dimensions (LxWxH): 55-13/16” x 29-13/16” x 84-5/16” 11) Net weight: 1,542 lb. 12) Gross weight: 1,807
|
Electrical Description |
|
|
|
FOR SALE: Year - 2009 Make - Victor Model - 1440B |
---|
FOR SALE: Ad # 9472 , Year = 2009 , Make = Victor , Model = 1440B |
|
Category: Chip Making Specials
|
Capacity: 14 x 40 Manual Lathe
|
Ad #
9472 |
Year:
| 2009
|
Make:
| Victor
|
Model:
| 1440B
|
Condition:
| New
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 2000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $5,995.00 USD
|
|
General Description |
- Standard Equipment
6" 3-jaw chuck Steady/follow rest face plate halogen work light 8" 4-jaw chuck 4-way toolpost full length splash guard Note: Please specify voltage 220/3 std. or 440/3 optional Features: Powerful 3HP single speed motor gives full power over all 12 speeds! High speeds 40-2,000RPM(12)speed ranges D1-4 Camlock spindle jog button for easy gear changes Quick change-english/metric gear box safety clutch for feed rod full length foot brake coolant pump Weight-1,936Lbs Specifications 1440B Spindle bore 1.5" Swing over bed 14" Swing over gap 20" Between centers 39.5" Spindle RPM 40-2,000(12)steps Spindle nose D1-4 Horsepower 3HP Swing over cross slide 8-5/8" Threads Metric0.4-7.0mm x 32 kinds English 4-56TPI Bed width 8" crosslide travel 7" Coumpound travel 4" Tailstock Quill #3MT Ad Summary: Heavy Duty Cast Iron base : Engine Lathe: 14"swing x 40"centers Gap bed design.
|
Electrical Description |
|
Comments: |
- Nice heavy duty cast base lathe
add freight if local pick up ..500.00
|
|
|
FOR SALE: Year - 80's? Make - Makino Model - KSJP |
---|
FOR SALE: Ad # 9444 , Year = 80's? , Make = Makino , Model = KSJP |
|
Category: Chip Making Specials
|
Capacity: 10 x 42 table, heavy duty machine
|
Ad #
9444 |
Year:
| 80's?
|
Make:
| Makino
|
Model:
| KSJP
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 3500
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $3,495.00 reduced USD
|
|
General Description |
- 10 x 42 table
DRO-2 axis step pulley head X & Z power feeds 4" riser block in column box ways coolant 30 taper spindle Quick Change vise misc tooling 75-4000 RPM 3 HP
|
Electrical Description |
|
Comments: |
- Very heavy duty quality mill
|
|
|
FOR SALE: Year - 78 Make - Fosdick Model - 4ft Sensetive |
---|
FOR SALE: Ad # 9022 , Year = 78 , Make = Fosdick , Model = 4ft Sensetive |
|
Category: Chip Making Specials
|
Capacity: 4ft arm : 12in column dia-3HP
|
Ad #
9022 |
Year:
| 78
|
Make:
| Fosdick
|
Model:
| 4ft Sensetive
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 5900
|
Dimension: L x W x H | 82 x 38 x 96 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $5,295.00 USD
|
|
General Description |
- LENGTH x COLUMN DIAMETER ..... 4' X 12"
AREA OF BASE (T-SLOTTED) ......... 53" X 30" AREA OF TILT TABLE (T-SLOTTED) ... 42" X 24" SPINDLE SPEEDS ............. (60) TO 1200 RPM SPINDLE FEEDS .................... (4) .002/.004/.007/.010 IPR SPINDLE STROKE ................... 10" SPINDLE DIAMETER ................. 2-1/4" SPINDLE TAPER .................... #4 MT SPINDLE TO COLUMN ................ 48´´ MAX. / 9" MIN.SPINDLE TO TILT TABLE ............ 23-1/2" MAX.SPINDLE TO BASE .................. 45" MAX. / 35" MIN.BASE HEIGHT ...................... 6-1/4" POWER TABLE ELEVATION ............ YES TAPPING .......................... ? SPINDLE MOTOR .................... 3 HP
|
Electrical Description |
|
Comments: |
|
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
FOR SALE: Year - 1996 Make - ACER Model - 3V-K |
---|
FOR SALE: Ad # 12640 , Year = 1996 , Make = ACER , Model = 3V-K |
|
Category: CNC & Retrofit Knee / Bed Mills w/o ATC
|
Capacity: 2 Axis cnc/manual mill- ACER
|
Ad #
12640 |
Year:
| 1996
|
Make:
| ACER
|
Model:
| 3V-K
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 3000
|
Dimension: L x W x H | 4x 4 x 7 |
Machine Location:
|
City: |
On Request
|
State: |
South Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Acer 2 Axis CNC/manual retrofit knee mill
Acu-rite Control 3V-K Model vari speed head 50-4200rpm air draw bar mister unit 220/440 volt Three-phase 60 Hz 3 HP Variable speed spindle Hardened and ground dovetail ways 10" x 50" table Table travel x-axis 34" Saddle travel y-axis 16" Quill travel 5" Knee travel z-axis 16" Ram travel 24" Throat distance 4.25" to 28.25" Owners manual Approx 2,500 lbs and 88" height Requires a 7' x 10' floor area note: no tooling..vise not included
|
Electrical Description |
|
|
|
FOR SALE: Year - 1996 Make - Atrump Model - K3VL-3 axis retrofit |
---|
FOR SALE: Ad # 10191 , Year = 1996 , Make = Atrump , Model = K3VL-3 axis retrofit |
|
Category: CNC & Retrofit Knee / Bed Mills w/o ATC
|
Capacity: 3 axis CNC/manual Knee Mill
|
Ad #
10191 |
Year:
| 1996
|
Make:
| Atrump
|
Model:
| K3VL-3 axis retrofit
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 3000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Control: Centroid M-15-5 S/N # 4110
3 axis CNC Knee Mill with manual/cnc Quill & hand wheels/cnc on table VS head-3HP ways look very good Power knee feed 10 x 50 table coolant chip pan on base lube system has manual quill & cnc controlled quill manual/cnc table hand wheel feed Spindle:# 30 taper NST(heavy duty) X Travel: 31.5" Y Travel: 15" Z Travel: 4" Quill Complete manuals and drawing w/ software demo for this macxhine
|
Electrical Description |
|
Comments: |
- Mechanically & electrically, this machine is in very good shape - all it cut was plastics and aluminum. Centroid service/training available all over the USA
Machine control monitor went out and could not be replaced with OEM unit , so we retro-fitted a std monitor in front of old one, it works well...Also went through it from to to bottom-replaced head drive belt, adjusted/cleaned oiling system and had control sent into centroid for tunning up and referb...its ready to go --
|
|
|
FOR SALE: Year - 2004 Make - Birmingham Model - AC-2SVF-3/Accu-2 |
---|
FOR SALE: Ad # 13864 , Year = 2004 , Make = Birmingham , Model = AC-2SVF-3/Accu-2 |
|
Category: CNC & Retrofit Knee / Bed Mills w/o ATC
|
Capacity: 3 axis cnc/manual knee mill
|
Ad #
13864 |
Year:
| 2004
|
Make:
| Birmingham
|
Model:
| AC-2SVF-3/Accu-2
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 3500
|
Dimension: L x W x H | 4 x 4 x 7 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Birmingham # AC-2SVF-3 3 axis cnc /Accupath-manual Knee Mill
table size: 9" x 49" control : centroid M400S S/.N # 20/82 110/1 voltage on control Standard main Features: High speed 3D contouring. English, French, Spanish and Chinese language display. M&G code programming or conversational 15" crystal-clear monitor. Easy switch from CNC to manual. PC based with floppy & RS232, LAN ready, mouse and keyboard. 32 bit digital signal procesor. Heavy duty servo motors. Turcite "B" coating on ways. High grade casting. High precision C3 class ground ballscrews with double nuts, pre-loaded, angular contact bearings. Standard Features: CNC Computer centroid 400S controlPC Based. Upgradeable software. 3.5" Floppy Disk Drive. Internal solid state hard drive. 15" Color LCD display. LAN Ready, RS232, mouse, keyboard and parallel ports. Digital fiber optics wired. Main spindle: R-8 3HP 220/3 voltage coolant pump: 220/3 voltage air power draw bar Auto lube vise w/ swivel base X travel: 30" cross travel 12" vertical knee travel: 16" spindle speed: 50-5000RPM programmable resolution/repeatability: 0.0001" position: 0.0002"/12" quill travel: 4-3/4" manual or cnc Note:very low hrs-little use-very nice machine! sells for almost 30K new!
|
Electrical Description |
|
|
|
FOR SALE: Year - 80's Make - mazak Model - micro center V |
---|
FOR SALE: Ad # 11819 , Year = 80's , Make = mazak , Model = micro center V |
|
Category: Vertical Machining Centers (VMC)
|
Capacity: Travels:X 30", Y 16", Z 18",
|
Ad #
11819 |
Year:
| 80's
|
Make:
| mazak
|
Model:
| micro center V
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- used mazak micro center V
Control: Fanuc 6 M Table: 32" x 16" Travels:X 30", Y 16", Z 18", 24-Position Automatic Tool changer Spindle: CAT 40 Tool Changer: 24 Stations Tool Changer: Dual (swing) Arm All Boxed Ways R232 cable wired into control box to program offline
|
Electrical Description |
|
|
|
We found 22 matching ads. Now displaying the remaining 22 ads.
FOR SALE: Year - Make - Bridgeport Model - 9 x 32 |
---|
FOR SALE: Ad # 12915 , Year = , Make = Bridgeport , Model = 9 x 32 |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 9 x 32" table 110/1 phase
|
Ad #
12915 |
Year:
|
|
Make:
| Bridgeport
|
Model:
| 9 x 32
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 1800
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Bridgeport Knee Mill
9 x 32" table 2M collet spindle-8 pcs included 110/1 single phase step pulley head ways look good
|
Electrical Description |
|
|
|
FOR SALE: Year - 80's Make - Makino Model - KSJP |
---|
FOR SALE: Ad # 11704 , Year = 80's , Make = Makino , Model = KSJP |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: Heavy Duty 10 x 42 table
|
Ad #
11704 |
Year:
| 80's
|
Make:
| Makino
|
Model:
| KSJP
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 4000
|
Dimension: L x W x H | 4 x 5 x7 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 10 x 42 table
40 taper spindle-heavy duty DRO-2 axis step pulley head X & Z power feeds 4" riser block in column box ways coolant 40 taper spindle Quick Change adapter included vise misc tooling 75-4000 RPM 3 HP
|
Electrical Description |
|
|
|
FOR SALE: Year - 2008 Make - Knuth Model - WF4-1 |
---|
FOR SALE: Ad # 14856 , Year = 2008 , Make = Knuth , Model = WF4-1 |
|
Category: Universal Mills (Horizontal / Vertical)
|
Capacity: travels:X 19.5" x Y15.5" x Z15.5"
|
Ad #
14856 |
Year:
| 2008
|
Make:
| Knuth
|
Model:
| WF4-1
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 3400
|
Dimension: L x W x H | 5 x 4 x 7 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 2008 Knuth WF4-1 Horizontal/vertical knee mill
DRO:3 axis std mfg.Specifications WF 4.1: Work space dimensions: 31.5” x 15.75” Vertical table dimensions: 41.5” x 9.75” T-slots, work table: (6) 1/2” x 2.5” T-slots, vertical table:(3) 1/2” x 2.5” Table load capacity: 650 Lbs Travels: Longitudinal (X): 19.5” Transverse (Y): 15.75” Vertical (Z): 15.75” Spindle axis-to-table surface distance: Horizontal spindle:2” - 17.5” Vertical spindle: 2” - 17.5” Max. Throat: 21.26” Speed range: (18) 40 - 2000 rpm Spindle mount: NMTB 40 Feeds X, Y, Z axis: 0.4” - 15”/ min Rapid feed: 48” /min Quill stroke: 3” Main motor rating: 4Hp Feed motor rating: 1.5 Hp Dimensions (L x W x H) 51”x56”x72” Weight: 3090 Lbs. spindle: 40NMTB spindle motor: 4HP European design quality,little use on it! Note: horizontal arbor support and several 10 tool holders also included Spare DRO display box!great condition Machine sold new for over 25K !
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Hardinge Model - UM |
---|
FOR SALE: Ad # 14271 , Year = , Make = Hardinge , Model = UM |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 6" x 26"
|
Ad #
14271 |
Year:
|
|
Make:
| Hardinge
|
Model:
| UM
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 870
|
Dimension: L x W x H | 47 x 56 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Hardinge Vertical knee tool room Mill
table size: 20.75 x 6.5" with oil pockets 25" x 6.5" 3 t slots 7/16" 110-1850 Spindle RPM Wired 480/3 Phase table Feed X motor: 3.4 HP spindle taper:5C collet travels: logintudinal 14" traverse: 11.5" vertical: 13.25 top of table to center of spindle max: 12" feeds: 32 range 1/8"-13" per minute max table load: 459lbs Driving Unit: The base Is of heavy, rugged construction and well ventilated. Base fully encloses a standard two-speed reversible motor, endless vee Lelt connected to a four step pulley to give eight forward and eight reverse speeds as listed above. The levers conveniently located on the column operate electric motor co ntrols for Low-Stop-High and Forward-Stop-Reverse speeds. The levers are provided with stops for immediate location of speed positions THE HARDINGE PRECISION MILLING MACHINE was designed to meet a definite need in the tool-room and laboratory. The construction, along modern lines, combines ruggedness with extreme accuracy for ease of operation. Reflection will indicate that larger milling machines are expensive and cumber some for the majority of milling operations completed in the tool-room and laboratory. The TM model has a plain table for Universal Index Centers while the UM model has a swiveling table for Universal Spiral Index Centers.
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 2014 Make - Baileigh Model - VM-1039E |
---|
FOR SALE: Ad # 14763 , Year = 2014 , Make = Baileigh , Model = VM-1039E |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 39" x 10" table
|
Ad #
14763 |
Year:
| 2014
|
Make:
| Baileigh
|
Model:
| VM-1039E
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 1700
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Baileigh #VM-1039E Knee Milling machine
Cross Travel:11" Height:84" Horsepower:1.5 Length:49" Maximum Table Travel:17-45/64" Number of Spindle Speeds:Variable Spindle Speed:270 - 2400 rpm Style:Vertical with DRO and PowerfeedTable Size:39" x 10" Type:Milling MachineVoltage:220V - 1 Phase Width:44" Product Weight: 1672 lbs. Applications: Machining metal Notes: The Baileigh Industrial VM-1039E knee mill is the big brother to the VM-931E vertical mill. It carries on the tradition of a well built economical machine that will do everything you could ask and more. This 220 volt single phase machine can be run just about anywhere, making it a good fit for just about any size fabricator or machine shop. •10" x 39" table •R8 Spindle •X and y axis power feed with Digital read out •coolant system note: very little use on machine,includes: digital readout,power feed, collet set,no vise,clamp,work light...ready to go! 220/1 voltage(single phase)
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Troyke Model - J-9 |
---|
FOR SALE: Ad # 15834 , Year = , Make = Troyke , Model = J-9 |
|
Category: Manual Mill, Parts and Accessories
|
Capacity: 9" dia base
|
Ad #
15834 |
Year:
|
|
Make:
| Troyke
|
Model:
| J-9
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: | We can load
|
Weight: | 100
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Troyke J-9 rotary table
8" dia base horiz/vertical type
|
|
|
FOR SALE: Year - 1987 Make - Seiki - XL Model - 3VH |
---|
FOR SALE: Ad # 15310 , Year = 1987 , Make = Seiki - XL , Model = 3VH |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 9" x 49"
|
Ad #
15310 |
Year:
| 1987
|
Make:
| Seiki - XL
|
Model:
| 3VH
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 3000
|
Dimension: L x W x H | 4 x 5 x 7 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Seiki XL
9" x 49" Table vari speed head 50-4500 rpm 3HP motor 220/440/3 voltage Sevro Powerfeed on longitudinal Acu Rite 3 DRO-2 axis digitalb readout notes:Vise Not included,ways look good
|
Electrical Description |
|
|
|
FOR SALE: Year - 1987 Make - Seiki Model - 3VH |
---|
FOR SALE: Ad # 15311 , Year = 1987 , Make = Seiki , Model = 3VH |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 9" x 49"
|
Ad #
15311 |
Year:
| 1987
|
Make:
| Seiki
|
Model:
| 3VH
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 3000
|
Dimension: L x W x H | 4 x 5 x 7 |
Machine Location:
|
City: |
On Request
|
State: |
South Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Seiki XL knee mill
table:9" x 49" vari speed head Note: power feed on longitudinal broken 3HP motor-220/440/3 voltage 50-4500RPM notes:ways look very good
|
Electrical Description |
|
|
|
FOR SALE: Year - ? Make - Atrump Model - K3VL |
---|
FOR SALE: Ad # 15825 , Year = ? , Make = Atrump , Model = K3VL |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 10 x 50"" table
|
Ad #
15825 |
Year:
| ?
|
Make:
| Atrump
|
Model:
| K3VL
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Not Under Power
|
Shipping Info: | We can load
|
Weight: | 3000
|
Dimension: L x W x H | 4 x 4 x 7 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Atrump # K3VL Knee Mill
Vari-speed head 50-4500 RPM Spindle:R8 3HP motor Newall Digital readout-2 axis Quill scale on Z Servo power feed on logitudinal axis Vise-Kurt work light Collets manual online link:https://www.atrump.com/support/92-support/download/manual-download.html Note: Very nice heavy duty box way mill
|
Electrical Description |
|
|
|
FOR SALE: Year - 1987 Make - Seiki Model - 3VH |
---|
FOR SALE: Ad # 15311 , Year = 1987 , Make = Seiki , Model = 3VH |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 9" x 49"
|
Ad #
15311 |
Year:
| 1987
|
Make:
| Seiki
|
Model:
| 3VH
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 3000
|
Dimension: L x W x H | 4 x 5 x 7 |
Machine Location:
|
City: |
On Request
|
State: |
South Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Seiki XL knee mill
table:9" x 49" vari speed head Note: power feed on longitudinal broken 3HP motor-220/440/3 voltage 50-4500RPM notes:ways look very good
|
Electrical Description |
|
|
|
FOR SALE: Year - 1987 Make - Seiki - XL Model - 3VH |
---|
FOR SALE: Ad # 15310 , Year = 1987 , Make = Seiki - XL , Model = 3VH |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 9" x 49"
|
Ad #
15310 |
Year:
| 1987
|
Make:
| Seiki - XL
|
Model:
| 3VH
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 3000
|
Dimension: L x W x H | 4 x 5 x 7 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Seiki XL
9" x 49" Table vari speed head 50-4500 rpm 3HP motor 220/440/3 voltage Sevro Powerfeed on longitudinal Acu Rite 3 DRO-2 axis digitalb readout notes:Vise Not included,ways look good
|
Electrical Description |
|
|
|
FOR SALE: Year - 1998 Make - Alliant Model - 42VC |
---|
FOR SALE: Ad # 15824 , Year = 1998 , Make = Alliant , Model = 42VC |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 9 x 42" table
|
Ad #
15824 |
Year:
| 1998
|
Make:
| Alliant
|
Model:
| 42VC
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Not Under Power
|
Shipping Info: | We can load
|
Weight: | 2800
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Alliant # 42VC Knee Mill
digital readout w/quill scale table 9 x 42" vise-kurt vari speed head 50-4500rpm power feed some collets R8 note:very nice
|
Electrical Description |
|
|
|
FOR SALE: Year - 90's Make - MSC Model - |
---|
FOR SALE: Ad # 11481 , Year = 90's , Make = MSC , Model = |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: small mill drill unit bench top unit
|
Ad #
11481 |
Year:
| 90's
|
Make:
| MSC
|
Model:
|
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 700
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- MSC bench top mill/drill unit
includes stand
|
Electrical Description |
|
|
|
FOR SALE: Year - 80's ? Make - Bridgeport Model - 9 x 42 |
---|
FOR SALE: Ad # 10484 , Year = 80's ? , Make = Bridgeport , Model = 9 x 42 |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 9 x 42 table
|
Ad #
10484 |
Year:
| 80's ?
|
Make:
| Bridgeport
|
Model:
| 9 x 42
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 2000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- 9 x 42 table
power needs work on longitudale-missing motor misc collets step pulley head
|
Electrical Description |
|
|
|
FOR SALE: Year - 80's Make - Bridgeport Model - series 1 |
---|
FOR SALE: Ad # 13388 , Year = 80's , Make = Bridgeport , Model = series 1 |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 9 x 49 table
|
Ad #
13388 |
Year:
| 80's
|
Make:
| Bridgeport
|
Model:
| series 1
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 2800
|
Dimension: L x W x H | 4 x 4 x7 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- used Bridgeport series 1 knee mill
9 x 49 table vari speed head 3 hp lube system power feeds X, Y & knee Note:Acu-rite DRO-2 axis,scale on x axis of DRO needs replaced but works except for at end of table about 8" from right end. Also auto quill downfeed mechanism needs work. We can replace DRO scale for $750.00
|
Electrical Description |
|
|
|
FOR SALE: Year - ? Make - MSC Model - 9 x 49 |
---|
FOR SALE: Ad # 14017 , Year = ? , Make = MSC , Model = 9 x 49 |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 9 x 49 table : 3HP
|
Ad #
14017 |
Year:
| ?
|
Make:
| MSC
|
Model:
| 9 x 49
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 3000
|
Dimension: L x W x H | 4 x 5 x 7 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- MSC Knee Mill
table 9 x 49 box way on Y 2 Axis DRo-Anilam wizard 100 power feed on X-table manual lube R-8 spindle 3HP nice mill-very little use Note: includes static phase converter mounted to side -so can run on 220/1 phase if needed
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - bridgeport Model - 2j |
---|
FOR SALE: Ad # 13880 , Year = , Make = bridgeport , Model = 2j |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 10 x 54" table
|
Ad #
13880 |
Year:
|
|
Make:
| bridgeport
|
Model:
| 2j
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 2500
|
Dimension: L x W x H | 4 x 5 x 7 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Bridgeport knee mill
10 x 54" table vari-speed head-3HP : R-8 mitutoyo 2 axis DRO x axis power feed-servo heavy duty box way frame needs a paint job...but ways look good
|
Electrical Description |
|
|
|
FOR SALE: Year - 1985? Make - Moore Model - # 3 |
---|
FOR SALE: Ad # 15061 , Year = 1985? , Make = Moore , Model = # 3 |
|
Category: Vertical Boring Mills
|
Capacity: # 3
|
Ad #
15061 |
Year:
| 1985?
|
Make:
| Moore
|
Model:
| # 3
|
Condition:
|
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: | We can load
|
Weight: | 4000
|
Dimension: L x W x H | 58 x 60" x 89" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Moore # 3 Jig Borer
size table: 11" x 24" S/N# B1285 w tooling shown std mfg specs below-please verify actual machine.. Moore Jig Borer, Model #3 *** Very Good Condition*** Table Working Surface 11" X 24" Longitudinal Table Travel 18" Cross Travel 11' Table Top to Spindle End 3-7/8' to 20-13/16' Spindle Quill Travel 5" Spindle Center to Column Ways 10" Spindle Center to Column Below Ways 13-3/4" Boring Cap 5/32" to 5" Spindle Speeds Via 2-Speed Motor 60-2250RPM Feeds per Rev. (3) .00075,.0015,.003 Weight 3,990lbs Features: * All hardened,ground and lapped ways * * Faster strokes for chop grinding * Infinite spindle speeds, 40-250RPM feeds:0.000075”, .0015”, .003 * Two-speed motor (1HP/ 2HP) note: nice machine!
|
Electrical Description |
|
|
|
FOR SALE: Year - 1985? Make - Moore Model - # 3 |
---|
FOR SALE: Ad # 15061 , Year = 1985? , Make = Moore , Model = # 3 |
|
Category: Vertical Boring Mills
|
Capacity: # 3
|
Ad #
15061 |
Year:
| 1985?
|
Make:
| Moore
|
Model:
| # 3
|
Condition:
|
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: | We can load
|
Weight: | 4000
|
Dimension: L x W x H | 58 x 60" x 89" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Moore # 3 Jig Borer
size table: 11" x 24" S/N# B1285 w tooling shown std mfg specs below-please verify actual machine.. Moore Jig Borer, Model #3 *** Very Good Condition*** Table Working Surface 11" X 24" Longitudinal Table Travel 18" Cross Travel 11' Table Top to Spindle End 3-7/8' to 20-13/16' Spindle Quill Travel 5" Spindle Center to Column Ways 10" Spindle Center to Column Below Ways 13-3/4" Boring Cap 5/32" to 5" Spindle Speeds Via 2-Speed Motor 60-2250RPM Feeds per Rev. (3) .00075,.0015,.003 Weight 3,990lbs Features: * All hardened,ground and lapped ways * * Faster strokes for chop grinding * Infinite spindle speeds, 40-250RPM feeds:0.000075”, .0015”, .003 * Two-speed motor (1HP/ 2HP) note: nice machine!
|
Electrical Description |
|
|
|
FOR SALE: Year - 1992? Make - Mighty Comet Model - 3KVHD |
---|
FOR SALE: Ad # 14538 , Year = 1992? , Make = Mighty Comet , Model = 3KVHD |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 10 x 50 table
|
Ad #
14538 |
Year:
| 1992?
|
Make:
| Mighty Comet
|
Model:
| 3KVHD
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 4000
|
Dimension: L x W x H | 5 x 5 x 7 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Comet Heavy duty knee mill
3HP vari speed 50-4500rpm work light R-8 spindle taper Digital quill scale-dro power feed on X axis 2 axis DRO on x& y travels-sargon no vise or tooling included 220/440/3 voltage motor Notes: box way (heavy duty) quality built mill
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Enco Model - 73012 |
---|
FOR SALE: Ad # 11805 , Year = , Make = Enco , Model = 73012 |
|
Category: Manual Mill, Parts and Accessories
|
Capacity: 12" manual indexer
|
Ad #
11805 |
Year:
|
|
Make:
| Enco
|
Model:
| 73012
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 100
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- manual rotary table table 12"
|
|
|
FOR SALE: Year - Make - Enco Model - 73012 |
---|
FOR SALE: Ad # 11805 , Year = , Make = Enco , Model = 73012 |
|
Category: Manual Mill, Parts and Accessories
|
Capacity: 12" manual indexer
|
Ad #
11805 |
Year:
|
|
Make:
| Enco
|
Model:
| 73012
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 100
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- manual rotary table table 12"
|
|
|
We found 9 matching ads. Now displaying the remaining 9 ads.
FOR SALE: Year - Make - Powermatic Model - 1200 |
---|
FOR SALE: Ad # 14941 , Year = , Make = Powermatic , Model = 1200 |
|
Category: Single Spindle Drill Press
|
Capacity: 20"
|
Ad #
14941 |
Year:
|
|
Make:
| Powermatic
|
Model:
| 1200
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 700
|
Dimension: L x W x H | 2 x 3 x 7' |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Powermatic # 1200 drill press
throat: 20" vari speed Spindle RPM: 300-2000 1/16"-7-8" drilling range table: 20" x 22" vise note: Powermatic 1200 :20" Variable Speed Drill Press in perfect working condition. Standing about 6' tall and around 700lbs, this drill press is a monster. It has a heavy duty MT3 spindle with a 3/4" chuck.
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Powermatic Model - 1200 |
---|
FOR SALE: Ad # 14943 , Year = , Make = Powermatic , Model = 1200 |
|
Category: Single Spindle Drill Press
|
Capacity: 20"
|
Ad #
14943 |
Year:
|
|
Make:
| Powermatic
|
Model:
| 1200
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 700
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Powermatic 1200 drill press
throat: 20" vari speed Spindle RPM: 300-2000 1/16"-7-8" drilling range table: 20" x 22" coolant tank note: Powermatic 1200 :20" Variable Speed Drill Press in perfect working condition. Standing about 6' tall and around 700lbs, this drill press is a monster. It has a heavy duty MT3 spindle with a 3/4" chuck.
|
|
|
FOR SALE: Year - 1996 Make - Hagen & Goebel Model - HG-8E-C |
---|
FOR SALE: Ad # 14923 , Year = 1996 , Make = Hagen & Goebel , Model = HG-8E-C |
|
Category: Tapping / Threading Equip.
|
Capacity: tapps up to 7/16-14 UNC threads and many others
|
Ad #
14923 |
Year:
| 1996
|
Make:
| Hagen & Goebel
|
Model:
| HG-8E-C
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 1000
|
Dimension: L x W x H | 2 x 3 x 5' |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Hagen & Goebel # HG-8E-C tapping unit
will tap: UNC:5-40,6-32,10-24,12- 24,1/4"-20,5/16-18",3/8"-16 & 7/16"-14 threads lead screw or manual precision 220/3 3/4H a high-performance brake motor will do the direction of rotation of the spindle. This pushes on a 9 variable speed belt drive the translation side of a gearbox on. The translation within the gearbox ensures an output speed within a completed before delivery voted speed range. For servo drives can be without changing the speed of pulleys to a display set. A blending of threads in any material is by using the leadscrew system prevented.
|
Electrical Description |
|
|
|
FOR SALE: Year - 1996 Make - Hagen & Goebel Model - HG-8E-C |
---|
FOR SALE: Ad # 14923 , Year = 1996 , Make = Hagen & Goebel , Model = HG-8E-C |
|
Category: Tapping / Threading Equip.
|
Capacity: tapps up to 7/16-14 UNC threads and many others
|
Ad #
14923 |
Year:
| 1996
|
Make:
| Hagen & Goebel
|
Model:
| HG-8E-C
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 1000
|
Dimension: L x W x H | 2 x 3 x 5' |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Hagen & Goebel # HG-8E-C tapping unit
will tap: UNC:5-40,6-32,10-24,12- 24,1/4"-20,5/16-18",3/8"-16 & 7/16"-14 threads lead screw or manual precision 220/3 3/4H a high-performance brake motor will do the direction of rotation of the spindle. This pushes on a 9 variable speed belt drive the translation side of a gearbox on. The translation within the gearbox ensures an output speed within a completed before delivery voted speed range. For servo drives can be without changing the speed of pulleys to a display set. A blending of threads in any material is by using the leadscrew system prevented.
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Willis/Modigs Model - RBM 28B |
---|
FOR SALE: Ad # 12917 , Year = , Make = Willis/Modigs , Model = RBM 28B |
|
Category: Radial Drill Press
|
Capacity: 2 ft arm
|
Ad #
12917 |
Year:
|
|
Make:
| Willis/Modigs
|
Model:
| RBM 28B
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 2000
|
Dimension: L x W x H | 4 x 3 x 6 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Willis-Modigs Radial Drill # RBM 28B
17 x 17" table w/ lift crank 120-1535 RPM coolant in base 8" dia column 24" throat power downfeed 440/3 1.5HP
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Willis/Modigs Model - RBM 28B |
---|
FOR SALE: Ad # 14388 , Year = , Make = Willis/Modigs , Model = RBM 28B |
|
Category: Radial Drill Press
|
Capacity: small radial drill 24" arm
|
Ad #
14388 |
Year:
|
|
Make:
| Willis/Modigs
|
Model:
| RBM 28B
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 2000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Willis-Modigs Radial Drill # RBM 28B
17" x 17" table w/lift crank 120-1535 RPM coolant pump in base 8" dia column 24: throar/arm power downfeed 440/3 1.5HP
|
Electrical Description |
|
|
|
FOR SALE: Year - 1970'S? Make - Arboga Model - ER1830 |
---|
FOR SALE: Ad # 15349 , Year = 1970'S? , Make = Arboga , Model = ER1830 |
|
Category: Radial Drill Press
|
Capacity: 28" throat
|
Ad #
15349 |
Year:
| 1970'S?
|
Make:
| Arboga
|
Model:
| ER1830
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 1500
|
Dimension: L x W x H | 3' x 2' x 7.5' |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Arboga # ER1830 radial drill
power down feed swivel table rpm:100-1095 crank up/down table several speed ranges 28" throat 7-1/8" column dia 230/3 voltage Std. Machine specs below-please verify actual machine ARBOGA MODEL ER-1830 ALL-GEARED RADIAL DRILLING MACHINE SPECIFICATIONS: Dimensions of Baseplate- 35-1/2" x 23-1/2" Working Surface of Baseplate- 23-1/2" x 23-1/2" Distance, Center of Spindle to Column- Max/Min- 24-1/2" / 14-3/8" Distance, Spindle Nose to Baseplate- Max/Min- 53-3/4" / 25-1/2" Height of Working Surface of Table Above Baseplate- 23-1/4" Working Surface of Table- 23-1/2" x 19-3/4" Vertical Movement on Column of Radial Arm- 28-1/8" Diameter of Ground Column- 7-1/8" Taper in Spindle- #4 MT Spindle Speeds (8)- 80 to 890 RPM Automatic Power Feed- .0053", .0078"/Rev. Quill Movement- 6-3/4" Maximum Drilling Diameter in Steel- 1-1/2" Total Height of Machine w/ Radial Arm in HIghest Position- 7'5" EQUIPMENT: T-Slotted Work Table 17-3/4" x 10-3/4" Angle Plate on Base 1/64" to 5/8" Keychuck Motor and Controls- 2 Speed- 2.2/1.55 HP 3/60/220 Volt AC 3400 RPM Floor Space: 45" L-R x 30" F-B x 73" High Weight: 1,500 Lbs. (Approx.) Note: included drilling sub table (on top)as shown.
|
Electrical Description |
|
|
|
FOR SALE: Year - 1970'S? Make - Arboga Model - ER1830 |
---|
FOR SALE: Ad # 15349 , Year = 1970'S? , Make = Arboga , Model = ER1830 |
|
Category: Radial Drill Press
|
Capacity: 28" throat
|
Ad #
15349 |
Year:
| 1970'S?
|
Make:
| Arboga
|
Model:
| ER1830
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 1500
|
Dimension: L x W x H | 3' x 2' x 7.5' |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Arboga # ER1830 radial drill
power down feed swivel table rpm:100-1095 crank up/down table several speed ranges 28" throat 7-1/8" column dia 230/3 voltage Std. Machine specs below-please verify actual machine ARBOGA MODEL ER-1830 ALL-GEARED RADIAL DRILLING MACHINE SPECIFICATIONS: Dimensions of Baseplate- 35-1/2" x 23-1/2" Working Surface of Baseplate- 23-1/2" x 23-1/2" Distance, Center of Spindle to Column- Max/Min- 24-1/2" / 14-3/8" Distance, Spindle Nose to Baseplate- Max/Min- 53-3/4" / 25-1/2" Height of Working Surface of Table Above Baseplate- 23-1/4" Working Surface of Table- 23-1/2" x 19-3/4" Vertical Movement on Column of Radial Arm- 28-1/8" Diameter of Ground Column- 7-1/8" Taper in Spindle- #4 MT Spindle Speeds (8)- 80 to 890 RPM Automatic Power Feed- .0053", .0078"/Rev. Quill Movement- 6-3/4" Maximum Drilling Diameter in Steel- 1-1/2" Total Height of Machine w/ Radial Arm in HIghest Position- 7'5" EQUIPMENT: T-Slotted Work Table 17-3/4" x 10-3/4" Angle Plate on Base 1/64" to 5/8" Keychuck Motor and Controls- 2 Speed- 2.2/1.55 HP 3/60/220 Volt AC 3400 RPM Floor Space: 45" L-R x 30" F-B x 73" High Weight: 1,500 Lbs. (Approx.) Note: included drilling sub table (on top)as shown.
|
Electrical Description |
|
|
|
FOR SALE: Year - 2005 Make - daytona Model - DF 16B |
---|
FOR SALE: Ad # 12510 , Year = 2005 , Make = daytona , Model = DF 16B |
|
Category: Single Spindle Drill Press
|
Capacity: 3/4" mild steel
|
Ad #
12510 |
Year:
| 2005
|
Make:
| daytona
|
Model:
| DF 16B
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Dayton drill press
16 speed -belt type Mt # 2 spindle 3/4" steel cap 5/8" chuck cap 3/4 HP
|
Electrical Description |
|
|
|
We found 31 matching ads. Now displaying the remaining 31 ads.
FOR SALE: Year - demo mac Make - Birmingham Model - RF-916V |
---|
FOR SALE: Ad # 13011 , Year = demo mac , Make = Birmingham , Model = RF-916V |
|
Category: Horizontal Band Saws
|
Capacity: 10" rounds or 5 x 16" rec-vari speed
|
Ad #
13011 |
Year:
| demo mac
|
Make:
| Birmingham
|
Model:
| RF-916V
|
Condition:
| New
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 700
|
Dimension: L x W x H | 67 x 25 x 41 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Birmingham "made in taiwan" quality saw # RF-916V
cutting capacity: mitre vise jaws at 0deg : 9" round or 5" x 16" rectangle at 45 deg: 6" round or 6" x 7.5" rectangle 2HP motor vari-speed drive: 75-402 FPM blade size: 93" x 3/4" x .035"-verify cast frame variable down feed pressure coolant auto end of cut shut off roll around caster base included nice saw almost no use on it-like new
|
Electrical Description |
|
|
|
FOR SALE: Year - 1998 Make - Amada Model - HA250W |
---|
FOR SALE: Ad # 14930 , Year = 1998 , Make = Amada , Model = HA250W |
|
Category: Fully Automatic Horizontal Band Saw
|
Capacity: 10" rounds
|
Ad #
14930 |
Year:
| 1998
|
Make:
| Amada
|
Model:
| HA250W
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 3000
|
Dimension: L x W x H | 6 x 7 x 4 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Amada # HA250W fully automatic shuttle feed
horizontal band saw Model: HA250W Cutting Capacity (Rectangular) : 10" x 12" Cutting Capacity (Round) :.... 0.5"-10" Work Load Capacity :...... 3,307 Lbs. Blade Size .. 1-1/4" x 138" x 0.042" Blade Speeds :variable speed dial : 89- 295 FPM Saw Blade Motor ....................... 5 H.P. Machine Dimensions ... 77" x 89" x 74" Machine Weight ..... 3,087 Lbs. EQUIPPED WTIH: Infeed System 9 Times Multi Index Split Vise Index Floating Vice Piece Counter Motion Detector Pressure Flow Valve Variable Speed-reeves drive Chip Conveyor/auger note:roller conveyor 5 ft section included
|
Electrical Description |
|
|
|
FOR SALE: Year - 2014 Make - Grizzley Model - G8144Z |
---|
FOR SALE: Ad # 14902 , Year = 2014 , Make = Grizzley , Model = G8144Z |
|
Category: Vertical Band Saws
|
Capacity: 12" throat
|
Ad #
14902 |
Year:
| 2014
|
Make:
| Grizzley
|
Model:
| G8144Z
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 450
|
Dimension: L x W x H | 34" W x 59-7/8" H x 21- |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Grizzley #G8144Z vertical band saw
This versatile bandsaw allows intricate cutting of aluminum or brass to tool steel. Features a blade welding station which includes a cutter, welder, annealer and a grinder. Ideal for making inside cuts and quick repairs. Features: •Variable speed from 104–1300 FPM w/ digital display •Blade welding station includes cutter, welder, annealer and grinder •Left, right table tilting control •Integrated chip pan •Upper and lower blade guides •Work light •Wheel brush Specifications: •Main motor: 1 HP, 220V, 3-phase, 1725 RPM with single-phase inverter •Grinder motor: 1/8 HP, 220V, single- phase •Power source: 220V, single-phase, 60 Hz •Maximum cutting height: 5-1/8" •Throat capacity: 12-3/16" •Blade length range: 94-1/4"–98-1/4" •Blade size range: 1/8"–3/8" •Blade speed: Variable, 104–1300 FPM •Electric welder: 1.2 KVA •Table tilt: 45° right, 15° left •Floor to table height: 34-5/8" •Table size: 18-1/8" x 22-1/8" •Overall dimensions: 34" W x 59-7/8" H x 21- 1/4" D •Approximate shipping weight: 428 lbs. Note: like new includes 3 spare blades and cutting wax
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - victor Model - DCM-6 |
---|
FOR SALE: Ad # 11739 , Year = , Make = victor , Model = DCM-6 |
|
Category: Vertical Band Saws
|
Capacity: 24" throat
|
Ad #
11739 |
Year:
|
|
Make:
| victor
|
Model:
| DCM-6
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 1200
|
Dimension: L x W x H | 4 x 5 x 7 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- victor vert band saw
dcm-6 24" throat digital blade speed indicator vari speed: low 65-280FPM, high 400-1640FPM 2 HP max blade width: 5/8" work height: 11-13/16"
welder tilt table
|
Electrical Description |
|
|
|
FOR SALE: Year - 2008? Make - Jet Model - # 414468 |
---|
FOR SALE: Ad # 14878 , Year = 2008? , Make = Jet , Model = # 414468 |
|
Category: Horizontal Band Saws
|
Capacity: 10" rounds or 9 x 16" rec
|
Ad #
14878 |
Year:
| 2008?
|
Make:
| Jet
|
Model:
| # 414468
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 700
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Jet Horizontal band saw # 414468
capacity: 10" rounds or 9 x 16" rec: max The HBS-916W features a large handwheel and built-in gauge for easy blade tensioning. Coolant is distributed through the blade guides, and the blade guides feature parallel double-row ball bearing support. Quick-positioning vise with fully adjustable jaws swivels to 45° Features + Benefits •Built-in, self-propelled blade brush •Fully guarded blade regardless of blade guide position •Fully adjustable hydraulic downfeed with separate on/off valve •Automatic shut-off after cut Cutting Depth at 45°(in.)9 round;9 x 14rectangle Cutting Depth at 90° (in.) 9" Cutting Capacity:Flat Stock(in. x in.)9 x 6 1/8 Blade Size:LxWxThickness(in.)1 x .035 x 119-1/2 Cutting Capacity:(SFPM)82/132/170/235(step pulleys) Volts 115/230 (prewired 115V) HP: 1.5 motor notes:sells new for $3700.00,nice little saw!
|
Electrical Description |
|
|
|
FOR SALE: Year - 2008? Make - Jet Model - VBS--18MW |
---|
FOR SALE: Ad # 14879 , Year = 2008? , Make = Jet , Model = VBS--18MW |
|
Category: Vertical Band Saws
|
Capacity: 18" throat
|
Ad #
14879 |
Year:
| 2008?
|
Make:
| Jet
|
Model:
| VBS--18MW
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 448lbs
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Jet vertical band saw #VBS-18MW for wood or metal
throat: 18" 3/4" blade(comes with) Blade Size:LxWxThickness(in.):137 x 3/4 x 0.0356 The JET Wood/Metal Vertical Bandsaw offers machine and fabrication professionals all the power and precision needed in a package that meets your individual specifications. JET has engineered a gear box that permits cutting of a great variety of materials Features + Benefits •Exclusive quick release, precision T-square style rip fence •Built-in cutting height scale • Extra large 19in. x19in. cast iron table •Convenient speed changes with no tools required •Ball bearing guide system reduces friction for longer blade life •Lower blade wheel brush and dust collection port keeps things clean •Heavy-duty gear box • Smooth roller bearing guides •Handy Miter gauge for accurate cuts •Fence and rail assembly is included •4in. dust chute resists clogging •Durable 3/4in. tool steel (SKS2) blade •Chip tray • Easy-to-view blade tracking adjustment window •Tension release lever •Blade speeds: Metal (SFPM) 80, 150, 265 •Blade speeds: Wood (SFPM) 1,000, 1,800, 3,200 •12in. max. height capacity •18 3/8in. throat capacity • Roomy 19in.L x 19in.W table size •Adjustable table tilt to right: 45 degrees • Adjustable table tilt to left: 10 degrees •37 1/2in. table height motor HP: 1.5 Cutting Capacity (SFPM) Metal: 80/150/265; Wood: 1,000/1,800/3,200 sells new for $2599.00
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Marvel Model - 916S |
---|
FOR SALE: Ad # 13701 , Year = , Make = Marvel , Model = 916S |
|
Category: Horizontal Band Saws
|
Capacity: 9" x 16" rec cut saw
|
Ad #
13701 |
Year:
|
|
Make:
| Marvel
|
Model:
| 916S
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 1000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Marvel 916S semi-automatic band saw
General Specifications As Per Brochure: Bed: Bed Height From Floor: 24-3/4" Vise Jaws Size: 13-1/2" x 5-1/2" & 10-3/4" x 5-1/2" Cutting Capacities: Round: 9" Rectangular: 9" x 16" Blade: 1" width Blade Wheel: 14-1/4" diameter Blade Size: 132" Blade Speeds Range: 70 - 280 fpm General: Motor: 2 Horsepower 1.5 kW, 220 / 440 Volt, 1,720 rpm, 6 / 3 Amps, 60 Hz Electrical: 220 / 440 Volt, Three Phase Overall Dimensions (approx.): 61" x 32" x 47" tall Equipped with Semi-Automatic Operation Infinitely Variable Blade Speeds Power Vise Clamping System Coolant System
|
Electrical Description |
|
|
|
FOR SALE: Year - 1996 Make - Dake Model - JH10 |
---|
FOR SALE: Ad # 14385 , Year = 1996 , Make = Dake , Model = JH10 |
|
Category: Horizontal Band Saws
|
Capacity: 10" round capacity or 18" flats
|
Ad #
14385 |
Year:
| 1996
|
Make:
| Dake
|
Model:
| JH10
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Dake #JH10 manual horizontal band saw
capacity:10" round capacity or 18" flats blade width: 1" motor: 1 HP vise: swivel to 45 deg quick release stock stop hand feed adj hydraulic:on blade downfeed blade speeds: 50,90,160,270 FPM coolant system-3 gallon
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - craftsman Model - 12" |
---|
FOR SALE: Ad # 14391 , Year = , Make = craftsman , Model = 12" |
|
Category: Vertical Band Saws
|
Capacity: 12" throat x 6" work height
|
Ad #
14391 |
Year:
|
|
Make:
| craftsman
|
Model:
| 12"
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 100
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- craftsman vertical band saw
12" throat x 6" work height 110/1 voltage 62" x up to 1/4"wide blade size includes a wood/metal blade 1/8" wide ready to go...nice home or light duty industrial saw
|
Electrical Description |
|
|
|
FOR SALE: Year - 1991 Make - Eisele Model - VMS-1 |
---|
FOR SALE: Ad # 14384 , Year = 1991 , Make = Eisele , Model = VMS-1 |
|
Category: Cold Saws & Power Hack Saws
|
Capacity:
|
Ad #
14384 |
Year:
| 1991
|
Make:
| Eisele
|
Model:
| VMS-1
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Not Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Eisele Ferrous cutting cold saw # VMS-1
vertical column cutting 40/80 rpm mitre cutting 90-45 275mm blade 220/3 max dia cutting: 4" max square 4 x 4" max rec 6.7 x 4 max vise open 7"
|
Electrical Description |
|
|
|
FOR SALE: Year - 2011 Make - Cosen Model - C-320NC |
---|
FOR SALE: Ad # 14823 , Year = 2011 , Make = Cosen , Model = C-320NC |
|
Category: Fully Automatic Horizontal Band Saw
|
Capacity: 12.6" dia max rounds
|
Ad #
14823 |
Year:
| 2011
|
Make:
| Cosen
|
Model:
| C-320NC
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 5000
|
Dimension: L x W x H | 79" x 79" x 59" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 2011 Cosen horizontal fully Automatic Shuttle feed
band saw #C-320NC std. mfg quote below,please verify actual machine Fully Programmable Dual Column Automatic Bansaw Cosen's C-320NC, incorporates a 5 hp powerful blade motor, 1 1/4” wide blade, independentcontrol panel, and heavy-duty dual column design. These features create a very rigid, dynamically stable and productive machine. The oversized precision ground columns ensure smooth saw frame movement and the consistently stable cutting force required throughout the cutting cycle, thereby increasing the cutting efficiency and extending blade life. Cosen now offers the latest in Touch Screen Control Technology, SNC-100. Coupled with a Mitsubishi PLC controller the 5.7” Color Touch Screen allows for fast easy programming of any job. Utilizing the SNC-100 System the operator easily programs the cut length and quantity desired. The SNC-100 System stores up to 99 cutting jobs and features Automatic Kerf Compensation for parts longer than a single index. The SNC-100 System also utilizes “Save-A-Blade” which retracts the material 1/8” from the blade at the end of each cut so the blade will not rub the material while the saw head moves up to allow the next index. All machine functions are controlled from the operator’s station. MACHINE SPECIFICATIONS Maximum Cutting Capacity: Round:12.6" Square:12.6 x 12.6" Rectangle (w x h):15" x 12.6" Bundle (w/ optional. top clamps) max.dia:O 12.6" max.rectangle :15" x 12.6” max: 6 3/8" x 12” min: 2.5” x 7 3/8” Blade: Speed – Inverter Driven:66 – 328 fpm (high range) 49 – 246 fpm (low range) Size:1 ¼" x 13'11" x .042" Guides:Carbide Motor: 5 HP Hydraulic:1 HP Coolant:1/8 HP Automatic Material FeedSystem: Job Storage:up to 99 jobs Single Index Stroke:0" to 16" Multiple Stroke Indexing:Up to 99 jobs 0" to 650" (featuring automatic kerf compensation) Weight 4,990 lbs. MACHINE FEATURES Machine Structure: ► Oversized Precision ground, large Dual Columns support and guide the rugged saw head through the entire cutting cycle. The saw head adopts a back tilt design which allows the blade to twist less than traditional bandsaws between the wheel and blade guide; thereby putting less stress on the blade, insuringlonger life. ► The oversized round columns provide hundreds of square inches of continuous surface contact with the sawhead throughout the entire cutting process. ► Cross Link is located on the top of the columns, connecting the two columns to form an archway design that gives it sound structural strength. ► Hydraulic shuttle vise assembly, made of heavy-duty cast iron with replaceable hardened wear plates, rides on two large guide shafts that are capable of handling extreme loads. Both shafts are ground and chrome plated for durability and smooth material feeding. Blade Drive: ► The gearbox is specially designed to accept high lateral pressure. Unlike conventional gearboxes, the Cosen design accepts more pressure during operation and will not create thermal distortion, providing long gearbox life under production conditions. ► Inverter blade drive system allows infinitely variable blade speeds to be controlled by the operator from the control panel with turn of a knob. The system comes standard with LED readout for convenient and accurate setting of blade speed. Blade Guidance & Lubrication System: ► Carbide guides securely guide the blade during the cutting cycle. The carbide is relieved so that coolant can both cool and lubricate the blade during the cut. ► The bearing guides eliminate blade stress by pre-aligning the blade before it enters the carbide guides. Two additional guides located on a central axis support the blade from the top, giving it extra penetrating force forfaster cuts. ► Automatic hydraulic blade tensioning device provides correct blade tensioning when the machine is turned on and will slightly release the tension when the machine is not running. This extends blade life. The on-off hydraulic valve switch is an added feature making blade change quicker and easier ► Integral coolant system. Coolant is supplied at four critical points: exit & entry of blade through blade guides, middle of cut via adjustable flex hose, and blade cleaning brush. Synchronized power driven blade brush effectively cleans chips from blade to extend blade life. Control & Automation: ► The operator’s control station ergonomically located on the front side of the saw is convenient and user friendly. All operator controls are positioned on the top of the control box and clearly labeled for ease of operation. The electrical components are located inside the control box with the main lockout disconnect on the front of the control box for safety and maint. Smart NC-100 (SNC100) technology provides most of the benefits of NC controlled saws at a mere fraction of the cost. SNC100 controls are programmable up to 99 different jobs including quantity and length of cut. The control automatically compensates for Kerf loss after data input and requires no manual calculation of number of times to index. The control also automatically shutdowns the machine, blade motor, and hydraulics, once the programmed number of cuts or out of stock situation has been achieved. The system includes an error feedback function enabling rapid troubleshooting through an error code to be displayed in the event of a malfunction. ► SNC-100 Features include: · 5.7” Touch screen · Mitsubishi PLC controller · 99 individual jobs can be programmed and stored· Stored program(s) may be easily recalled and executed at Will. · Blade Speed Display · Motor amp draw (optional) · Optional Blade Deviation Detection monitor can be controlled directly from Touch Screen · Automatic Kerf Loss Compensation & Automatic Multiple Indexing up to 650” · Save-a-Blade Feature - The shuttle vise will automatically retract the material slightly after cut-off, so a blade can avoid the undesirable abrasion with material, improving cutting tool life. · Error Code Display Provides simplified self-diagnostics. · Blade life timer. ► Precision feed pressure & feed rate dual valve system for optimal cutting performance in any material. Selector Switch for bundle or single cutting modes ► Automatic work height sensor and air gap eliminator positions the saw frame to a safe clearance above the work piece, so that the next piece can be positioned without damaging the blade. After feeding, the saw head will descend quickly to within approximately 1/8" of work piece, where it proceeds at the predetermined cutting rates. Material Clamping & Feeding: ► Split vise jaws on the front machine vise are standard. The split front vise will hold the work piece on both sides of the blade for a burr-free cut. This system also features automatic feeding of material down to a remnant length of 2". ► Hydraulic front and rear vises enable clamping and unclamping of any material from the operator’s control station. ► Ductile cast iron vise with replaceable hardened wear plates. ► Smart NC Controlled Multiple indexing for long cutting lengths of up to 650” maximum length, utilizing full shuttle length every index until desired length is reached. One set of vertical alignment rollers, which is convenient for bundle cutting and positioning bar stock, is standard and is located on the machine base. Multiple horizontal rollers located on the entry side of the saw to facilitate smooth material feeding. Discharge Table with built–in coolant return adequately supports cut-off stock and provides coolant savings in the long run. Proximity switches sense both blade slippage and blade breakage and will automatically shut off the machine if either of these conditions should occur. ► All blade covers, and guarding on the saw are painted Alert Orange to increase safety alertness. All exposed electric wiring and hydraulic circuit are protected by conduits.
|
Electrical Description |
|
|
|
FOR SALE: Year - 1997 Make - Tomet Model - T350 |
---|
FOR SALE: Ad # 12773 , Year = 1997 , Make = Tomet , Model = T350 |
|
Category: Cold Saws & Power Hack Saws
|
Capacity: 12" blade ferrous cutting
|
Ad #
12773 |
Year:
| 1997
|
Make:
| Tomet
|
Model:
| T350
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 500
|
Dimension: L x W x H | 36" x 36" x 72" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Tomet Coldsaw-ferrous cutting
Model T350 2 speed Year 1997 12" Blade made in italy Miter 45 Degrees left and right
|
Electrical Description |
|
|
|
FOR SALE: Year - 1991 Make - Dake Johnson Model - VH-40 |
---|
FOR SALE: Ad # 12743 , Year = 1991 , Make = Dake Johnson , Model = VH-40 |
|
Category: Vertical Band Saws
|
Capacity: 40" Throat
|
Ad #
12743 |
Year:
| 1991
|
Make:
| Dake Johnson
|
Model:
| VH-40
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 2400
|
Dimension: L x W x H | 72 x 60 x 78" |
Machine Location:
|
City: |
On Request
|
State: |
South Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Dake Johnson Bandsaw-hyd table feed
40" Throat depth Blade Speed 50-4250 FPM-low & hi range table size: 26" x 26" table travel hyd: 10" tilt 10 deg left or right table max weight: 850lbs blade size: 186-189" x 1/8 to 3/4" width 2.2 HP motor blade dust blow off pump/nozzle welder: 1/8" -1" blades wired: 220/3 Phase Power Table feed-vari speed
|
Electrical Description |
|
|
|
FOR SALE: Year - 2008 Make - Maxi saw Model - MX 370 |
---|
FOR SALE: Ad # 11560 , Year = 2008 , Make = Maxi saw , Model = MX 370 |
|
Category: Cold Saws & Power Hack Saws
|
Capacity: 14" blade
|
Ad #
11560 |
Year:
| 2008
|
Make:
| Maxi saw
|
Model:
| MX 370
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 900
|
Dimension: L x W x H | 3 x 4 x 4 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Maxi saw cold saw ferrous cutting
less than 5 hrs on machine speed: 60 RPM great for thin wall tubing and aluminium.. just a little dusty-like new 15" blade coolant 6" vise opening x 2.5" high mitre jaws std specs:please verify The Maxisaw model MX370 is a 15 inch uniquely designed machine with remarkable range of cutting capabilities .The machine can turn 90 degree left and right practically cutting any angle. The material stops can be mounted in two positions one for regular cutting , second for extra large cuts up to ten inches (flat bar) . Also you can make notching, slotting and compound cuts. Chanal: 9.5" x 3.5" (240mm x 87mm) Rectangular: 10" x 2.5" (250mm x 63mm) Rectangular: 7" x 3.5" (175mm x 87mm) Turntable can be equipped with two opposing vices, mounted in the front or the rear T-slots. That allows to cut 2" x 6" 45 degree (shown above), 4" x 4" 45 degree, 4" x 2" 60 degree, slitting and notching.
For slitting and notching the turning range of the turntable is 90 degrees left and right. Two opposing vices also allows to cut 10" deep.
CUTTING RANGE (blade size 370mm x 2.5mm x 32/40mm ~ 14 1/2") Straight Cut 45° 60° 4 3/4" (120mm) 3 9/16" (90mm) 3 3/8" (85mm) STANDARD EQUIPMENT Double grip mechanical vice Pair of material stops Saw blades arbor with 32mm & 40 mm options Cabinet stand with doors Overload protection switches for motor and collant pump Large removable chip tray 4 gallon coolant tank Complete set of allen wenches & grease 4 3/16" (105mm) 3 9/10" (90mm) 3 3/8" (85mm) 10" x 2 1/2" (250mm x 83mm) 5" x 3" (125mm x 75mm) 4" x 3" (100mm x 75mm) 9 1/2" x 3 1/2" (240mm x 87mm) 5" x 3" (125mm x 75mm) 4" x 3" (100mm x 75mm) 3" (75mm) 3" (75mm) 3" http://www.maxisaw.com/product.php
|
Electrical Description |
|
|
|
FOR SALE: Year - 2010 Make - Wilton Model - 7040 |
---|
FOR SALE: Ad # 11561 , Year = 2010 , Make = Wilton , Model = 7040 |
|
Category: Horizontal Band Saws
|
Capacity: 10" round 10 x 16" L-manual saw
|
Ad #
11561 |
Year:
| 2010
|
Make:
| Wilton
|
Model:
| 7040
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 970
|
Dimension: L x W x H | 4 x 5 x 4 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Wilton horiz manual saw
mitre jaws 0-60 deg 10" round cap, 10 x 16 rec 1" blade 2HP 17" rectagle coolant low hrs-just dirty list price $5,899.00 std: specs below verify Features: •Variable speed drive systems allows the operator to fine tune the blade speed fast and easily •Swing away control panel •Exclusive 6 contact point blade adjustable •Combined with the side bearings are carbide pads, the back of the blade rides on two mounted on a pivot shaft so bothe bearings share the load equally •Copunterbalanced feed system is controlled by a dual system of counterbalanced •1" Bi-metal blades •Cast iron blade wheels Specifications: Part Number 414478 Motor 2 HP, 230/460V, 3 Ph, Prewired 230V Round at 90 Degrees (in.) 10 Round at 45 Degrees (in.) 10 Rectangle at 90 Degrees (in.) 9 X 16 Square at 90 Degrees (in.) 10 Blade Size (in.) 1 X .035 X 135 Blade Speeds (SFPM) 100 - 350 Bed Height (in.) 23-1/2 Blade Length (in.) 135 Rectangle at 45 (in.) 9 X 8 Web Description J-7040 10 x 16 HORIZONTAL BANDSAW 2HP, 230V, 3PH Model Number J-7040 Brand Jet Height 41 inch Width 31 inch Length 79 inch Net Weight 973 pound Includes 5 blades new in box
|
Electrical Description |
|
|
|
FOR SALE: Year - 80's? Make - MEP Model - SL350MP |
---|
FOR SALE: Ad # 13503 , Year = 80's? , Make = MEP , Model = SL350MP |
|
Category: Cold Saws & Power Hack Saws
|
Capacity: non ferrous-Round Tube - 4-3/4"
|
Ad #
13503 |
Year:
| 80's?
|
Make:
| MEP
|
Model:
| SL350MP
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 2200
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- MEP SL350MP "non ferrous"circuliar saw
14" carbide blade Capacity Round Tube - 4-3/4" Capacity Retangular Tube - 6-1/4" x 4-1/4" Capacity Round Solid - 2-1/2" Blade Size - 14" Blade Speed - 1750-3600 RPM Blade Motor - 2speeds-3 HP 2-Speed compound mitre head dual clamp air vise spare 14" carbide blade great for aluminium extrusions
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Kysor-Johnson Model - J |
---|
FOR SALE: Ad # 14758 , Year = , Make = Kysor-Johnson , Model = J |
|
Category: Horizontal Band Saws
|
Capacity: 10" round:220/1 phase
|
Ad #
14758 |
Year:
|
|
Make:
| Kysor-Johnson
|
Model:
| J
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 1000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Kysor-johnson # J horizontal band saw
Capacity:10" round,10"-1/2" x 18" rectangular mitre vise jaws Step pulley ratio hyd. down feed w/ blade coolant mounted on roll around casters 3-4 spare blades included Voltage:110 or 220/1(single Phase)
|
|
|
FOR SALE: Year - Make - Grob Model - NS-18 |
---|
FOR SALE: Ad # 15829 , Year = , Make = Grob , Model = NS-18 |
|
Category: Vertical Band Saws
|
Capacity: 18" throat
|
Ad #
15829 |
Year:
|
|
Make:
| Grob
|
Model:
| NS-18
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Not Under Power
|
Shipping Info: | We can load
|
Weight: | 1500
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Grob NS-18 Vertical band saw
blade speed: 50-2030 FPM ,step pully change: with low /high gearbox work light air blow off Motor Driven with 1 HP, 3-Phase, 60 Cycle, AC Motor & Controls throat:18" blade welder mechanical table auto infeed std machine specs below SPECIFICATIONS: Throat 18″ Speeds (10)50-2030 RPM Bladewidth: 1/2″ Table Size 24″ x 24″ Table Tilt Left & Right :25 Degrees Table Tilt Front & Back25 Degrees Approximate Weight1,500 Lbs spare blade voltage 220/3 phase
|
Electrical Description |
|
|
|
FOR SALE: Year - 2000?? Make - Delta Model - 28365 |
---|
FOR SALE: Ad # 10580 , Year = 2000?? , Make = Delta , Model = 28365 |
|
Category: Vertical Band Saws
|
Capacity: 20" throat
|
Ad #
10580 |
Year:
| 2000??
|
Make:
| Delta
|
Model:
| 28365
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- 20" throat
tilt table Good for wood, plastic or Metal High speed/Low speeds Variable speed drive-needs a little work
|
Electrical Description |
|
|
|
FOR SALE: Year - 1985 ? Make - DoAll Model - C-916 |
---|
FOR SALE: Ad # 12505 , Year = 1985 ? , Make = DoAll , Model = C-916 |
|
Category: Horizontal Band Saws
|
Capacity: 9"x16" flats / 10-3/4" rounds
|
Ad #
12505 |
Year:
| 1985 ?
|
Make:
| DoAll
|
Model:
| C-916
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 1500
|
Dimension: L x W x H | 86"x26"x53" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- One Used - Doall 9" x 16" Horizontal Band Saw
Model# C-916 manual saw
CAPACITY: 9" X 16" FLATS / 10-3/4" ROUNDS BAND WHEELS: 14-1/2" DIAMETER BLADE SIZE: 159" L X 1" W WORK HEIGHT: 26" BLADE SPEEDS APPROX: 105 - 275 FPM O.A.D.: 86" L-R X 26" F-B X 53" H APPROX WEIGHT: 1,500 LBS
EQUIPPED WITH: mitre cutting swivel vise HYDRAULIC FEED CONTROL & HEAD RELEASE VALVE 5-1/2" HIGH VISE WITH HAND LEVER FOR CLAMPING RECIRCULATING COOLANT PUMP & CHIP PAN SAW BLADE ADJUSTMENT GUIDE PUSH BUTTONS FOR START - STOP SELECTOR SWITCH FOR COOLANT - ON - OFF V/S DRIVE ADJUSTMENT VIA step pulley 2 HP 1800 RPM 230/460/3/60 MOTOR
|
Electrical Description |
|
|
|
FOR SALE: Year - 1990 Make - Bewo/Scotchman Model - CPO350LT |
---|
FOR SALE: Ad # 12502 , Year = 1990 , Make = Bewo/Scotchman , Model = CPO350LT |
|
Category: Cold Saws & Power Hack Saws
|
Capacity: 4.5" round tube
|
Ad #
12502 |
Year:
| 1990
|
Make:
| Bewo/Scotchman
|
Model:
| CPO350LT
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 1700
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Bewo/ Scotchman CPO 350 cold saw
12.5" blade max
Manual Double Self-Centering Vise Assures Burr-Free Cuts Miter Capabilities 45 degrees Left and 45 degrees Right Miter Locking Device: Quick, Accurate Setting-Stops at 45 Degrees Left, Straight 90 Degrees, and 45 Degrees Right Operator Controlled Trigger Switch Capable of Slotting Two Cutting Speeds Double Reduction, Hardened and Ground Worm and Wheel Gear Box Worm Wheel of Top Quality Bronze Chip Drawer 7 Gallon Coolant Tank with Pump One 12-1/2" Diameter (315 mm) HSS Blade One Blade Wrench One Gallon Concentrated Coolant LT(Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe LT (Low Turn) 22 rpm / 44 rpm Motor rate: 3 hp
TUBING : Round -4.5" max Square -4-1/4" x 4-1/4" Rectangle : 5.5 x 4"
SOLID Round : 2" Square 90 Degree : 2 x 2 4-1/2" 4-1/4" x 4-1/4" 5-1/2" x 4" rec @ 90 deg
90 Degree 2" 2" x 2" Tubing @45 Degree 4" round 4" x 4" square 4" x 4" rectangle
At 45 Degree 1-3/4" solid 1-3/4" x 1-3/4" square Note: had a power down feed unit but was removed to make fully manual operated
|
Electrical Description |
|
|
|
FOR SALE: Year - ? Make - Scotchman Model - CPO 350 LT |
---|
FOR SALE: Ad # 12501 , Year = ? , Make = Scotchman , Model = CPO 350 LT |
|
Category: Cold Saws & Power Hack Saws
|
Capacity: 4.5" round tube
|
Ad #
12501 |
Year:
| ?
|
Make:
| Scotchman
|
Model:
| CPO 350 LT
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 700
|
Dimension: L x W x H | 4 x 4 x 5 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Scotchman CPO 350LT cold saw
12.5" blade max
Manual Double Self-Centering Vise Assures Burr-Free Cuts Miter Capabilities 45 degrees Left and 45 degrees Right Miter Locking Device: Quick, Accurate Setting-Stops at 45 Degrees Left, Straight 90 Degrees, and 45 Degrees Right Operator Controlled Trigger Switch Capable of Slotting Two Cutting Speeds Double Reduction, Hardened and Ground Worm and Wheel Gear Box Worm Wheel of Top Quality Bronze Chip Drawer 7 Gallon Coolant Tank with Pump One 12-1/2" Diameter (315 mm) HSS Blade One Blade Wrench One Gallon Concentrated Coolant LT(Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe LT (Low Turn) 22 rpm / 44 rpm Motor rate: 3 hp
TUBING : Round -4.5" max Square -4-1/4" x 4-1/4" Rectangle : 5.5 x 4"
SOLID Round : 2" Square 90 Degree : 2 x 2 4-1/2" 4-1/4" x 4-1/4" 5-1/2" x 4" rec @ 90 deg
90 Degree 2" 2" x 2" Tubing @45 Degree 4" round 4" x 4" square 4" x 4" rectangle
At 45 Degree 1-3/4" solid 1-3/4" x 1-3/4" square
|
Electrical Description |
|
|
|
FOR SALE: Year - 1994 Make - Eisele Model - VMS-1 |
---|
FOR SALE: Ad # 12407 , Year = 1994 , Make = Eisele , Model = VMS-1 |
|
Category: Cold Saws & Power Hack Saws
|
Capacity: 45 Degree 12" Blade-ferrous-manual saw
|
Ad #
12407 |
Year:
| 1994
|
Make:
| Eisele
|
Model:
| VMS-1
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Eisele Cold Saw-ferrous cutting
manual saw 12" Blade-275mm 40/80 rpm 45 Degree Miter Year 1994 Voltge 220/3 Phase
|
Electrical Description |
|
|
|
FOR SALE: Year - 2005 Make - Ellis Model - 1600 |
---|
FOR SALE: Ad # 11232 , Year = 2005 , Make = Ellis , Model = 1600 |
|
Category: Horizontal Band Saws
|
Capacity: 10” Round at 90°, 8"pipe 11" flat
|
Ad #
11232 |
Year:
| 2005
|
Make:
| Ellis
|
Model:
| 1600
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 500
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 1600 Mitre Band Saw
Head of band saw moves left or right for angle cutting Built-in protractor for fast and accurate selection of angles One-step conversion from horizontal to vertical band saw Stock remains in one position for all cuts Portable-this band saw moves easily to the job site
Specifications 1600 Mitre Band Saw
Capacity 10” Round at 90° 8” Pipe at 90° 11” Flat at 90° 6 7/8” Round at 45° 6” Pipe at 45° 7 1/4” Flat at 45° Blade Speeds 70-135-250 FPM Blade Size 10’0” x 1” x .035 Head Pressure Hydraulic Cylinder Vise Quick Adjusting Shut Off Automatic Motor 1 H.P. 110/220 Volt Single Phase Portable 10” Wheels-Standard Shipping Weight 481 lbs. Size Table Height 27” Length 59” Width 24 “ Height 47” Sealed Oil Bath Worm Gear Standard Removable Chip Tray Standard Construction Heavy Steel; Welded & Machined for Accuracy & Durability Accessories
|
Electrical Description |
|
|
|
FOR SALE: Year - 2007 Make - Ellis Model - 1800 |
---|
FOR SALE: Ad # 11231 , Year = 2007 , Make = Ellis , Model = 1800 |
|
Category: Horizontal Band Saws
|
Capacity: 11" round , 14" flats ;mitre head saw
|
Ad #
11231 |
Year:
| 2007
|
Make:
| Ellis
|
Model:
| 1800
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 690
|
Dimension: L x W x H | 4 x 5 x 4 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 1800 Mitre Band Saw
Features Head of band saw moves left or right for angle cutting Built-in Protractor for fast and accurate selection of angles Stock remains in one position for all cuts Specifications 1800 Mitre Band Saw Capacity 11” Round at 90° 10” Pipe at 90° 14” Flat at 90° 11” H x 10” W at 90° 9” Round at 45° 8” Pipe at 45° 9” Flat at 45° 11” H x 6” W at 45° Blade Speeds 70-135-230 FPM Blade Size 11’0” x 1” x .035 Head Pressure Hydraulic Cylinder Vise Quick Adjusting Shut Off Automatic Motor 1 H.P. 110/220 Single Phase or 3 PH 220-440-460-480 Shipping Weight 640 lbs. Size Table Height 28 Length 66” Width 29 “ Height 47” Sealed Oil Bath Worm Gear Standard Removable Chip Tray Standard Construction Heavy Steel; Welded & Machined for Accuracy & Durability Accessories Stock stand with rollers blade
Note: very low hrs of use...very good condition...
|
Electrical Description |
|
|
|
FOR SALE: Year - 2015 Make - Jet Model - J-CK350-2K/414203K |
---|
FOR SALE: Ad # 14610 , Year = 2015 , Make = Jet , Model = J-CK350-2K/414203K |
|
Category: Cold Saws & Power Hack Saws
|
Capacity: Rectangle at 90 Degrees (in.) 5-1/2 x 3-3/4
|
Ad #
14610 |
Year:
| 2015
|
Make:
| Jet
|
Model:
| J-CK350-2K/414203K
|
Condition:
| New
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 685
|
Dimension: L x W x H | 2 x 3 x 7 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- JET J-CK350-2K
350mm MANUAL COLD SAW NON-FERROUS 230V/3 mfg# 414203K ■Non-Ferrous cold saw ■High speed manual saw ■Mitering capabilities - stops 90°, 45° left and 45° right ■Double self-centering vise for burr free cuts ■Two cutting speeds ■Thermal overload protection with magnetic starter ■Coolant System included Part Number 414203K Round at 90 Degrees (in.) 4-1/2 Round at 45 Degrees (in.) 3-1/2 Rectangle at 90 Degrees (in.) 5-1/2 x 3-3/4 Square at 90 Degrees (in.) 4-1/4 x 4-1/4 Blade Size (in.) 350mm x 32 x 3.4 Blade Speeds (RPM) 1750, 3500 Maximum Vise Opening (in.) 6 Motor 2HP, 230V, 3Ph Rectangle at 45 Degrees (in.) 3-1/2 x 3-1/2 Square at 45 Degrees (in.) 3-1/2 x 3-1/2 Web Description J-CK350-2K 350mm MANUAL COLD SAW NON-FERROUS 230V Model Number J-CK350-2K Net Weight 683 pound note: mfg list price $4799.00
|
Electrical Description |
|
|
|
FOR SALE: Year - 2015 Make - Jet Model - J-CK350-2K/414203K |
---|
FOR SALE: Ad # 14610 , Year = 2015 , Make = Jet , Model = J-CK350-2K/414203K |
|
Category: Cold Saws & Power Hack Saws
|
Capacity: Rectangle at 90 Degrees (in.) 5-1/2 x 3-3/4
|
Ad #
14610 |
Year:
| 2015
|
Make:
| Jet
|
Model:
| J-CK350-2K/414203K
|
Condition:
| New
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 685
|
Dimension: L x W x H | 2 x 3 x 7 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- JET J-CK350-2K
350mm MANUAL COLD SAW NON-FERROUS 230V/3 mfg# 414203K ■Non-Ferrous cold saw ■High speed manual saw ■Mitering capabilities - stops 90°, 45° left and 45° right ■Double self-centering vise for burr free cuts ■Two cutting speeds ■Thermal overload protection with magnetic starter ■Coolant System included Part Number 414203K Round at 90 Degrees (in.) 4-1/2 Round at 45 Degrees (in.) 3-1/2 Rectangle at 90 Degrees (in.) 5-1/2 x 3-3/4 Square at 90 Degrees (in.) 4-1/4 x 4-1/4 Blade Size (in.) 350mm x 32 x 3.4 Blade Speeds (RPM) 1750, 3500 Maximum Vise Opening (in.) 6 Motor 2HP, 230V, 3Ph Rectangle at 45 Degrees (in.) 3-1/2 x 3-1/2 Square at 45 Degrees (in.) 3-1/2 x 3-1/2 Web Description J-CK350-2K 350mm MANUAL COLD SAW NON-FERROUS 230V Model Number J-CK350-2K Net Weight 683 pound note: mfg list price $4799.00
|
Electrical Description |
|
|
|
FOR SALE: Year - 196.? Make - Do All Model - 1612-0 |
---|
FOR SALE: Ad # 15107 , Year = 196.? , Make = Do All , Model = 1612-0 |
|
Category: Vertical Band Saws
|
Capacity: 16" throat
|
Ad #
15107 |
Year:
| 196.?
|
Make:
| Do All
|
Model:
| 1612-0
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 1000
|
Dimension: L x W x H | 50"x45"x60" H |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Do-all vertical band saw # 1612-0
tilt table blade speed indicator capacity: 16" throat x 12" height blade welder work light 16" DOALL VERTICAL BANDSAW MODEL: 1612-0 SPECIFICATIONS: THROAT CAPACITY............ 16" WORK HEIGHT CAPACITY........ 12" BAND WIDTH CAPACITY...... 1/16" - 1/2" BAND LENGTH ................ 125" TABLE SIZE.............. 24" X 24" TABLE TILT RIGHT / LEFT .45 / 10 DEGREES BLADE SPEED INFINITELY VARIABLE: 2 SPEED RANGES.... 50 - 5200 FPM WHEEL DIAMETERS..... 16-1/4" APPROXIMATE SIZE... 50"x45"x60" H UNIT WEIGHT......... 1,000 LBS.
|
Electrical Description |
|
|
|
FOR SALE: Year - 196.? Make - Do All Model - 1612-0 |
---|
FOR SALE: Ad # 15107 , Year = 196.? , Make = Do All , Model = 1612-0 |
|
Category: Vertical Band Saws
|
Capacity: 16" throat
|
Ad #
15107 |
Year:
| 196.?
|
Make:
| Do All
|
Model:
| 1612-0
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 1000
|
Dimension: L x W x H | 50"x45"x60" H |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Do-all vertical band saw # 1612-0
tilt table blade speed indicator capacity: 16" throat x 12" height blade welder work light 16" DOALL VERTICAL BANDSAW MODEL: 1612-0 SPECIFICATIONS: THROAT CAPACITY............ 16" WORK HEIGHT CAPACITY........ 12" BAND WIDTH CAPACITY...... 1/16" - 1/2" BAND LENGTH ................ 125" TABLE SIZE.............. 24" X 24" TABLE TILT RIGHT / LEFT .45 / 10 DEGREES BLADE SPEED INFINITELY VARIABLE: 2 SPEED RANGES.... 50 - 5200 FPM WHEEL DIAMETERS..... 16-1/4" APPROXIMATE SIZE... 50"x45"x60" H UNIT WEIGHT......... 1,000 LBS.
|
Electrical Description |
|
|
|
FOR SALE: Year - 2011 Make - import Model - 4 x 6 |
---|
FOR SALE: Ad # 13778 , Year = 2011 , Make = import , Model = 4 x 6 |
|
Category: Horizontal Band Saws
|
Capacity: 4 x 6" rec or 3" rounds
|
Ad #
13778 |
Year:
| 2011
|
Make:
| import
|
Model:
| 4 x 6
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 200
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- horizontal/vertical universal band saw
4 x 6" rectangle or 3" round capacity step pulley speed change 110/1 voltage 1/2" HP mitre swivel vise nice little saw
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Kalamazoo Model - 9AW |
---|
FOR SALE: Ad # 11804 , Year = , Make = Kalamazoo , Model = 9AW |
|
Category: Horizontal Band Saws
|
Capacity: 13" rounds
|
Ad #
11804 |
Year:
|
|
Make:
| Kalamazoo
|
Model:
| 9AW
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 800
|
Dimension: L x W x H | 6 x 4 x 4 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Kalamazoo 9AW horizontal saw
13" HORIZONTAL BAND SAW, Kalamazoo 9AW 9" X 12" KALAMAZOO HORIZONTAL BAND SAW MODEL: 9AW CAPACITY AT 90 DEG. ROUND .......... 9" RECTANGLE .......................... 9" X 13" CAPACITY AT 45 DEG. ROUND .......... 8" RECTANGLE .......................... 8" X 8" VISE OPENING ....................... 16" SPEED RANGE ........................ 62-390 FPM HP ................................. 2 HP mitre vise jaws on casters coolant 110/1 voltage BLADE SIZE ......................... 1"x.035"x10'10 1/2" FLOOR TO WORKING SURFACE ........... 25 1/2" WEIGHT ............................. 892 LBS
|
Electrical Description |
|
|
|
We found 17 matching ads. Now displaying the remaining 17 ads.
FOR SALE: Year - 80's ?? Make - Power-matic Model - 30A |
---|
FOR SALE: Ad # 10443 , Year = 80's ?? , Make = Power-matic , Model = 30A |
|
Category: Belt & Disc Grinders
|
Capacity: 6 x 48 belt & 12" disc combo unit
|
Ad #
10443 |
Year:
| 80's ??
|
Make:
| Power-matic
|
Model:
| 30A
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 800
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 6 x 40" belt & 12" disc
tilting tables both dust vac system built in to unit machine was completly refurbished 1.5 HP-1750 RPM tilts 30 deg upwards and lowers 45 deg rack mechanism for raising and lowering table by hand crank can run on 220/3 phase or 440/3
|
Electrical Description |
|
|
|
FOR SALE: Year - 2004 Make - Sharp Model - SG820-3A |
---|
FOR SALE: Ad # 12949 , Year = 2004 , Make = Sharp , Model = SG820-3A |
|
Category: 3 Axis Fully Automatic Surface Grinder
|
Capacity: 20" x 8" hyd. w/ programmable down feed
|
Ad #
12949 |
Year:
| 2004
|
Make:
| Sharp
|
Model:
| SG820-3A
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 2600 LBS
|
Dimension: L x W x H | 7' x 5' x 7' |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Sharp SG820-3A w/auto prog. downfeed
8 x 20 electro mag chuck Max Peripherial Speed of Wheel 6560SFM Electro magnetic std pole chuck Table/chuck Size-20"x8" Controler- 1 Axis NC System ST-1 Electrical:220-3 Phase -60 HZ 3 Horsepower paper filter coolant system specs bebelow: Advanced Numerical Control system for spindle downfeed allows easy datas input for stock removal and feed selections Auto grinding cycles can be set for regular traverse or plunge grinding, with spindle downfeed on either side of the table Downfeed consists of coarse feed, fine feed and 0-9 spark out passes Auto return feature will either notify the user and prepare for the next part or return the table and spindle to a preset position and shut the machine down Base, column, table and saddle castings made from Meehanite for strength and rigidity Turcite coated double V ways on the saddle are hand scraped Turcite coated flat and V way for the table are hand scraped Cartridge type spindle with high precision AEBC 7 bearings Saddle locking system for accurate slot grinding Precision cross feed ballscrew Working surface - 8 x 20" Approx. floor space - 83L x 59W x 78"H Standard Accessories:
Advanced NC downfeed system Kanetsu Electro-magnetic chuck with control Coolant system (approx. 25 gal) with paper filter and splash guards Automatic lubrication system Hydraulic system with independent tank for vibration free table movement Hydraulic table stroke setting Grinding wheel and wheel flange Work light
Specifications: SG820-3A Chuck size W x L 8 x 20" Max. from spindle(center) to table top 15.7" Max. longitudinal travel 23.6" Max. cross travel 9.25" Hydraulic feed 3.3-82 fpm Handfeed per revolution 0.2" Continuous traverse feed 0.006-0.4" Grad. of handwheel 0.0005" Rapid feed 47 ipm Feed rate 0.00004-0.004" Max. total down feed amt.in 1 setting 9.99" Spark out 0-9 passes Spindle drive motor 2 HP Wheel diameter 8" Wheel width 0.875" Wheel bore 1-1/4" Hydraulic motor 1 HP Weight (approx.) 2,640 lbs machine list price new: $27,150.00
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - Make - HM Scantool Model - TAS-150 |
---|
FOR SALE: Ad # 11733 , Year = , Make = HM Scantool , Model = TAS-150 |
|
Category: Belt & Disc Grinders
|
Capacity: heavy duty 6" belt sander
|
Ad #
11733 |
Year:
|
|
Make:
| HM Scantool
|
Model:
| TAS-150
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 300
|
Dimension: L x W x H | 4 x 1 x 3 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- HM belt sander
6" wide belt 1500 rpm 4 HP A industrial 150mm wide belt sander-finishing machine. A useful addition to any workshop or tool room. The machine is able to process both profiled and contoured parts on the front rubber coated contact wheel or flatting work on the top mounted 500mm long platen under a hinged guard . The design incorporates a collection bucket under the contact wheel to intercept and catch any dropped parts or larger waste items that may be drawn into the dust catchment area such as sprue from castings allowing easy retrieval. The pedestal has a pivoting connection joint to the pedestal that allows the work ends height to be adjusted for rake allowing better positioning and comfort for operators of different height. The manual tracking and tensioning assembly is conveniently located at arm length along with the quick release side guard for quick and easy belt changes. Complete with self contained dust extraction fan.
|
Electrical Description |
|
|
|
FOR SALE: Year - 1965 Make - Brown and Sharpe Model - # 2 Universal |
---|
FOR SALE: Ad # 14334 , Year = 1965 , Make = Brown and Sharpe , Model = # 2 Universal |
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: OD:21" Swing has 3" Riser x 30"
|
Ad #
14334 |
Year:
| 1965
|
Make:
| Brown and Sharpe
|
Model:
| # 2 Universal
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 8300
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Brown and Sharpe #2 universal Grinder
Two Wheel 3" Riser swing 21" x 30" 460 voltage Coolant tank Machine set up for facing parts. MODEL:B & S- #2 WHEELHEAD MOTOR ........... 3 HP WHEELHEAD SPINDLE SPEEDS (3):2100,2400,2800 RPM WHEEL SIZE .......... 14" X 1-1/2" X 5" WHEELHEAD SWIVELS LEFT & RIGHT OF CENTER ...... 90 DEG. WHEEL SPINDLE SWIVELS ...........90 DEG. HEADSTOCK MOTOR ............. 1/2 HP HEADSTOCK SWIVELS ........... 180 DEG. INFINITELY VARIABLE SPINDLE SPEEDS:25 TO 500 RPM SPINDLE NOSE ............... A2-6" INFINITELY VARIABLE TABLE SPEED:3" TO 150" IPM TRAVEL PRE-REVOLUTION OF HANDWHEEL 0.1" SLOW 0.1" FAST DWELL @ TABLE REVERSAL:0 TO 2-1/2" SECONDS SWIVEL TABLE - TAPER PER FOOT .... 5" BACK 1-1/2" FORWARD - SCALES FOR ANGULAR SETTING 12 DEG. BACK 3 DEG. FORWARD AUTOMATIC CROSS FEED, INF. VARIABLE 0.0001" - 0.003" POSITIVE STOP SETTING ...... 0.00002" APPROXIMATE MACHINE WEIGHT . 8,300 LBS DIMENSIONS ..... 112"W X 62"L X 61"H EQUIPPED WITH: HYDRAULIC OPERATOR FEATURING: -POWER TABLE TRAVERSE -AUTOMATIC INFEED -AUTOMATIC PLUNGE INFEED RIGHT OR LEFT END WHEEL MOUNTING DOUBLE SWIVEL WHEELHEAD - SWIVELLING @ WHEEL SPINDLE HEAD OR @ THE WHEEL SLIDE PERMITS ANY STRAIGHT AND TAPER GRINDING DUAL DEAD/LIVE HEADSTOCK SPINDLE PULL-OUT HYDRAULIC SYSTEM COOLANT SYSTEM Note No tail stock No I.D. Head
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - precision Model - CT-301 |
---|
FOR SALE: Ad # 15833 , Year = , Make = precision , Model = CT-301 |
|
Category: Pedestal & Bench Grinders
|
Capacity:
|
Ad #
15833 |
Year:
|
|
Make:
| precision
|
Model:
| CT-301
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 200
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Bench grinder w/pedestal
6" wheels 3450 rpm tilt table w/angle protractors trays includes some wheels
|
Electrical Description |
|
|
|
FOR SALE: Year - 1982? Make - Boyer-Schultz Model - Challenger:H612 |
---|
FOR SALE: Ad # 15827 , Year = 1982? , Make = Boyer-Schultz , Model = Challenger:H612 |
|
Category: Surface Grinders
|
Capacity: 6" x 12" manual hand feed
|
Ad #
15827 |
Year:
| 1982?
|
Make:
| Boyer-Schultz
|
Model:
| Challenger:H612
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Not Under Power
|
Shipping Info: | We can load
|
Weight: | 1200
|
Dimension: L x W x H | 3 x 4 x 6 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Boyer-Schultz #Challenger:H612
Hand manual feed ,rack & pinion drive surface grinder 6" x 12"travels Height Under 7” Wheel 12”,Longitudinal 13-7/8",cross 6-13/16"travels wheel speed: 2450 rpm Walker 6 x 12 fine pole perm magnetic chuck. Handwheel graduation downfeed .0005", Handwheel graduation crossfeed .001", Grinding Wheel Capacity 7" X 5/8" X 1-1/4". work light lube unit dry grinding set up wheel & long. stop wrenches,several spare wheels & Acc included shown.. Note: very nice precision grinder..best of class!
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Harig Model - 612 Hydraulic |
---|
FOR SALE: Ad # 15828 , Year = , Make = Harig , Model = 612 Hydraulic |
|
Category: Surface Grinders
|
Capacity: 6 x 12 hyd -semi automatic w/vari speed
|
Ad #
15828 |
Year:
|
|
Make:
| Harig
|
Model:
| 612 Hydraulic
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Not Under Power
|
Shipping Info: | We can load
|
Weight: | 1800
|
Dimension: L x W x H | 4 x 5 x 6' |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Harig 612 Hydraulic-semi automatic surface grinder
hyd. feed left to right.. z&y axis manual feed in/out & up/down vari speed spindle inverter drive digital readout on Y axis in/out feed -Acurite-could easly move scale to z axis note:comes with a few spare grinding wheels pneumatic clamp fixture included for holding non ferrous parts optional: micro fine manual feed on in/out feed on table Y axis chuck: Walker fine pole perm mag.. vac system-drum type 1.5 hp motor wired 208/3
|
Electrical Description |
|
|
|
FOR SALE: Year - 1995? Make - Darex Model - E-90 |
---|
FOR SALE: Ad # 15822 , Year = 1995? , Make = Darex , Model = E-90 |
|
Category: Tool & Cutter Grinders
|
Capacity: end mill sharpner
|
Ad #
15822 |
Year:
| 1995?
|
Make:
| Darex
|
Model:
| E-90
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 150lbs
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
General Description |
- Darex E-90 End Mill Sharpener
comes complete including these standard items: • Set of 6 Ultra precision collets (3/16, 3/8, 1/2, 5/8, 3/4 and 1") • CBN (Borazon) grinding wheel dust cover plus spare acc shown in pix std mfg machine specs below-please verify actual machines: #E90 DAREX END MILL SHARPENER AND GRINDER MODEL E90, Spec No 34P12W371 W7-89 EQUIPPED WITH: Radius Attachment Extra Wheels Stand - Lamp CATALOFUE SPECIFICATIONS: Cutting Tool Diameter, Range........... 1/16" to 1" Shank Diameter Sharpened............... 3/16" to 1" Shank Capacity, Flute Diameter......... 2" Point Styles Sharpened, Flutes......... 2, 3, 4, & 6 HSS Motor Horsepower....................... 1/4 HP/3400 RPM Electrical System...................... 115/1/60 Machine Size 17.5" x 17.5" Machine Height......................... 10.75" Machine Weight......................... 72 LBS NOTE: This Machine Quickly And Easily Sharpens A Wide Range Of End Mills Including Cobalt And Carbide End Mills. It Will Renew End Mills With Up To 1" In Diameter And 6" Flute Length And Easily Sharpen Long Flute End Mills. A Sharp End Mill Will Allow Maximum Machining Rates As Well As Generating Less Heat In The Process.
|
Electrical Description |
|
|
|
FOR SALE: Year - 1990's ? Make - Acer Model - AGS 200 |
---|
FOR SALE: Ad # 11479 , Year = 1990's ? , Make = Acer , Model = AGS 200 |
|
Category: Surface Grinders
|
Capacity: Acer 8 x 16
|
Ad #
11479 |
Year:
| 1990's ?
|
Make:
| Acer
|
Model:
| AGS 200
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 1600
|
Dimension: L x W x H | 56" x 60 x 54" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Acer AGS 200 manual surface grinder
8 x 16 hand feed . std. electro mag chuck coolant system DRO system New Wheel hub/puller
Working surface of table:16" x 6-1/4" Max grinding surface : 8" x 16" Max horiz travel" 17" Max cross table travel: 8" Downfeed graduations: 0.001" 2HP Wheel size: " x 1/2" x 1-1/4" 3500 RPM Max table load: 440lbs
|
Electrical Description |
|
|
|
FOR SALE: Year - 1994 Make - Okamoto Model - ACC-6-18 DX3 |
---|
FOR SALE: Ad # 11478 , Year = 1994 , Make = Okamoto , Model = ACC-6-18 DX3 |
|
Category: 3 Axis Fully Automatic Surface Grinder
|
Capacity: 6 x 18: 3 axis w auto downfeed
|
Ad #
11478 |
Year:
| 1994
|
Make:
| Okamoto
|
Model:
| ACC-6-18 DX3
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 4000
|
Dimension: L x W x H | 5 x 5 x 6 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Okamoto 6 x 18 W/ auto downfeed-surface grinder
Maximum grinding area (L x W): 18"x6½; Maximum weight of work piece: 264 lbs.; Surface length: 20"; Surface Width: 6"; Maximum longitudinal travel: 20.9"; Maximum cross travel: 6.9"; T-slot (Qty. x width): 1x0.669; Longitudinal movement of table; Hydraulic feed: 0.33-66.67 ft/min; Hand feed per revolution cross movement of saddle intermittent feed: 0.002-0.1; Continuous feed: 3-8 in/min; Voltage: 230/460v; Phase 3; Cycle 60; Spindle: 1hp/2p; Hydraulic pump: 1hp/2p; Vertical feed: .5hp; L x W x H: 77x52x80"; Weight: 2640 lbs.; Equipped with: 618 Electro Magnetic Chuck, , wheel hub /puller,manuals, transformer 220/3
|
Electrical Description |
|
|
|
FOR SALE: Year - 80's ? Make - Royal Master Model - CG-12 |
---|
FOR SALE: Ad # 11363 , Year = 80's ? , Make = Royal Master , Model = CG-12 |
|
Category: Centerless Grinders
|
Capacity: Centerless crush Grinder -CG-12X4
|
Ad #
11363 |
Year:
| 80's ?
|
Make:
| Royal Master
|
Model:
| CG-12
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 2800
|
Dimension: L x W x H | 4 x 4 x5 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Used Royal Master centerless grinder
Model # CG-12 manual feed Crush Grinder no feed system coolant tank included-not shown
CAPACITY: Std specs below-please verify-below INFEED AND THRUFEED ............. 0.004" TO 1.5" DIA. THRU FEED.........................0.004" TO 1.5" DIA. LENGTH ............................. 12' ON 0.5" DIA. CRUSH GRIND......................... 1.5" DIA X 3" MAX WIDE WHEELS: MAXIMUM GRINDING WHEEL ........... 12" DIA. X 4" WIDE MINIMUM GRINDING WHEEL ......... 10" DIA. X 1/4" WIDE MAXIMUM REGULATING WHEEL .......... 6" DIA. X 4" WIDE MINIMUM REGULATING WHEEL .......... 4" X .25" WIDE SPINDLE SPEEDS: GRINDING WHEEL ............. CONSTANT SPEED 2,040 RPM REGULATING WHEEL ........ INF. VARIABLE 25 TO 480 RPM GRINDING WHEEL WHILE CRUSHING.......60RPM CRUSHER: ROLLER SIZE ......................... 3.75" MAX. DIA. 2" BORE 3.25" MAX. WIDTH COOLANT EQUIPMENT: COOLANT TANK ON CASTERS...............40 GALLONS MOTORS: MAIN DIVE.............................7.5HP, 1725 RPM DOUBLE END SPINDLE TOTALLY ENCLOSED FAN COOLED CRUSH REDUCTOR DRIVE..................1/3HP, 1725 RPM COOLANT PUMP..........................1/6HP, 3450 RPM,12 GAL/MIN AT 5 PSI HYDRAULIC PUMP........................1/4HP, 1725 RPM, 5G GAL/MIN AT 150 PSI REGULATING WHEELHEAD: MAX. ANGLE OF TILT FOR THRUFEED GRINDING . 6 DEGREES MAX. SWIVEL FOR TAPER GRINDING ........... 5 DEGREES
APPROXIMATE FLOOR SPACE ................ 4" X 48" APPROXIMATE WEIGHT ...................... 2,800 LBS
|
Electrical Description |
|
|
|
FOR SALE: Year - 80's Make - custom Model - 4meter |
---|
FOR SALE: Ad # 14073 , Year = 80's , Make = custom , Model = 4meter |
|
Category: Belt & Disc Grinders
|
Capacity: 4meter: roll polishers
|
Ad #
14073 |
Year:
| 80's
|
Make:
| custom
|
Model:
| 4meter
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Not Under Power
|
Shipping Info: | We can load
|
Weight: | 1000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 4 meter custom built roll polishing sanders
max roll dia : 15" max roll length: 4 meter or 157" auto traverse system on both with limit switches vari speed drive system on traverse and sanding heads control panels for each included seperate note: one sanding head uses rect. sheet sand paper ..other uses round paper and sanding head spins to give polished finish on plated rolls Common components electrically (Allen Bradley). made them in usa drawings available 2 similiar machines available
|
Electrical Description |
|
|
|
FOR SALE: Year - ? Make - Baldor Model - 8107WD |
---|
FOR SALE: Ad # 14633 , Year = ? , Make = Baldor , Model = 8107WD |
|
Category: Pedestal & Bench Grinders
|
Capacity:
|
Ad #
14633 |
Year:
| ?
|
Make:
| Baldor
|
Model:
| 8107WD
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Baldor grinder/buffer
3/4 HP single phase 110/1 voltage 3600RPM Note: 2 units available
|
Electrical Description |
|
|
|
FOR SALE: Year - ? Make - Baldor Model - 8107WD |
---|
FOR SALE: Ad # 14633 , Year = ? , Make = Baldor , Model = 8107WD |
|
Category: Pedestal & Bench Grinders
|
Capacity:
|
Ad #
14633 |
Year:
| ?
|
Make:
| Baldor
|
Model:
| 8107WD
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Baldor grinder/buffer
3/4 HP single phase 110/1 voltage 3600RPM Note: 2 units available
|
Electrical Description |
|
|
|
FOR SALE: Year - 1963 Make - Do-All Model - DH-612 |
---|
FOR SALE: Ad # 14574 , Year = 1963 , Make = Do-All , Model = DH-612 |
|
Category: Surface Grinders
|
Capacity: 6 x 12" chuck semi-auto traverse feed
|
Ad #
14574 |
Year:
| 1963
|
Make:
| Do-All
|
Model:
| DH-612
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 2800
|
Dimension: L x W x H | 4 x 4 x 6' |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Doall # DH-612 hyd. feed surface grinder
hyd: table feed-left to right only,HANDWHEEL FOR TABLE TRAVERSE CAN BE USED ON LEFT OR RIGHT SIDE OF MACHINE chuck: 5" x 10" perm magnet wheel size: 7" x 1/2", 7" max dia 1 HP direct drive spindle motor,SUPER-PRECISION DIRECT DRIVE SPINDLE no coolant spindle RPM:3450 includes parts & operation manuals
|
Electrical Description |
|
|
|
FOR SALE: Year - ? Make - Do all Model - 4207 |
---|
FOR SALE: Ad # 13152 , Year = ? , Make = Do all , Model = 4207 |
|
Category: Belt & Disc Grinders
|
Capacity: 6" x 48" Wide Belt x 12" Disk
|
Ad #
13152 |
Year:
| ?
|
Make:
| Do all
|
Model:
| 4207
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Do All
Disk & Belt Sander 6 x 48" belt 12" Disk 230 Voltage 3 Phase
|
Electrical Description |
|
|
|
FOR SALE: Year - 1980? Make - KO Lee Model - B6062R |
---|
FOR SALE: Ad # 16076 , Year = 1980? , Make = KO Lee , Model = B6062R |
|
Category: Tool & Cutter Grinders
|
Capacity: swing 12.25" centers:32"
|
Ad #
16076 |
Year:
| 1980?
|
Make:
| KO Lee
|
Model:
| B6062R
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Not Under Power
|
Shipping Info: | We can load
|
Weight: | 1450
|
Dimension: L x W x H | 5' x 5' x 4' |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- KO Lee Tool and cutter grinder #B6062R:S/N#20636MG
Std Mfg. specs below -please verify actual machines Swing over table: 12-1/4" Distance between tailstocks: 32" Table working surface: 5-1/4" X 37-1/4" Sub table: 8" X 48" Longitudinal table traverse: 20" Fast: 2-13/16" Slow: 9/16" Cross feed: 8" Feed per rev. of handwheel (.001" grad.): 0.050" Vertical movement of column: 10-1/2" Column diameter: 6" Shaft to table: 5-3/8" / 15-1/4" Spindle 90 deg. to table: 6-3/8" Spindle 90 degrees to table: 11-1/2" Table swivels (calibration: 3" PER FT., 15 deg. either side of center): 225 DEGREES Wheel head swivel: 360 DEGREES Maximum i.d. depth, hole size 9/32" to 2":3-1/2" Maximum cross feed surface grinding w/8"wheel:5" (heavy duty wheelhead): 2840 TO 5330 RPM Approximate machine weight: 1,500 LBS Lots of tooling included:diamond wheels,tail stocks,xy table ,fixtures,wheel hubs ect.
|
Electrical Description |
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - 1963 Make - DC Morrison Model - # K ;1-1/4" |
---|
FOR SALE: Ad # 13768 , Year = 1963 , Make = DC Morrison , Model = # K ;1-1/4" |
|
Category: Keyseaters
|
Capacity: 1-1/4" max cap: single tooth keyseater
|
Ad #
13768 |
Year:
| 1963
|
Make:
| DC Morrison
|
Model:
| # K ;1-1/4"
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 2000
|
Dimension: L x W x H | 4 x 4 x 4 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- DC Morrison 1-1/4" single tooth keyseater
comes with cutter mars: 1-1/4",3/4", 1/2" Also includes cutters & inserts shown Includes some tooling Nice Machine Sells for over 15K new manual
|
Electrical Description |
|
|
|
FOR SALE: Year - 1972? Make - Davis Model - # 4 |
---|
FOR SALE: Ad # 15013 , Year = 1972? , Make = Davis , Model = # 4 |
|
Category: Keyseaters
|
Capacity: 3/4"
|
Ad #
15013 |
Year:
| 1972?
|
Make:
| Davis
|
Model:
| # 4
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 800
|
Dimension: L x W x H | 4 x 3 x 4 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Davis # 4 Keyseater
3/4" gear drive 220/3 some tooling included not pictured approx.: 8 broaches various widths
|
Electrical Description |
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 197? Make - Superior Hone Model - HM |
---|
FOR SALE: Ad # 14942 , Year = 197? , Make = Superior Hone , Model = HM |
|
Category: Horizontal and Vertical Hones
|
Capacity: Work Capacity w/Proper Tooling 3”
|
Ad #
14942 |
Year:
| 197?
|
Make:
| Superior Hone
|
Model:
| HM
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 900
|
Dimension: L x W x H | 4 x 5 x 5' |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Superior hydraulic Hone #HM
S/N #2200-B-1911 3/4HP #HM SUPERIOR HORIZONTAL HYDRAULIC HONE 197?, Serial No 2200-214, Model HM EQUIPPED WITH: Foot Treadle Self Contained Hydraulic System Single Control Sizing Dial Infinitely Variable Speed Spindle Tachometer Coolant System CATALOGUE SPECIFICATIONS: Work Capacity w/Proper Tooling 3” Stone Pressure, Maximum 200 LBS Stone Pressure, Recommended 60 to 90 LBS Spindle Speeds, Infinitely Variable 225 to 1700 RPM Spindle Drive Motor, Horsepower 0.75 HP Hydraulic Motor, Horsepower 0.33 HP Electrical System 220-440/3/60 Overall Dimensions, W x D 3’1” x 2’10” Overall Height 4’9” Weight, Approximately 950 LBS NOTE: includes a wood box of tooling-not shown...Tooling Can Be Procured From Superior Honing Equipment, Sarasota, Florida.
|
Electrical Description |
|
|
|
We found 10 matching ads. Now displaying the remaining 10 ads.
FOR SALE: Year - 12/97 Make - Accushear Model - 625010 |
---|
FOR SALE: Ad # 14877 , Year = 12/97 , Make = Accushear , Model = 625010 |
|
Category: Power Squaring Shear (Hydraulic)
|
Capacity: 10 ft x 1/4" Hydraulic
|
Ad #
14877 |
Year:
| 12/97
|
Make:
| Accushear
|
Model:
| 625010
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | Rigging Fee Extra
|
Weight: | 17500
|
Dimension: L x W x H | 147"L x 85"W x 83"H |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 1997 Accushear #625010 Hydraulic shear
capacity: 10ft x 1/4" Nominal Rated Capacity: Thickness (Steel): 1/4" Maximum Shearing Length: 10' Knife Size: 1" x 3" x 124" Number of Hold Downs: 16 Strokes Per Minute: 23/48 SPM Oil Pressure: 3500 Main Motor Drive: 20 HP Control Voltage: 24 Cycles Per Minute-- 23 SPM Full Stroke -- 48 SPM Short Stroke High Speed-- 38 SPM Full Stroke -- 60 SPM Short Stroke Current Electrical Arrangement: 240/3/60 With: Accurshear PLC Driven Programmable back gage (go to)gauge.,Front Supports, 2ft Squaring Arm, Push Button Control For Basic Back Gauge Operation 36" "Go To" . Up to 9 pre-select settings. Swing Up Back Gauge Electric Footswitch Quick Blade Adjustment Squaring Arm-2ft Note:rigging/loading fee $800.00
|
Electrical Description |
|
|
|
FOR SALE: Year - ? Make - Jet Model - FS-1652 |
---|
FOR SALE: Ad # 11562 , Year = ? , Make = Jet , Model = FS-1652 |
|
Category: Foot Stomp & Air Operated Shear
|
Capacity: foot shear 4ft x 16ga
|
Ad #
11562 |
Year:
| ?
|
Make:
| Jet
|
Model:
| FS-1652
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 100
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- jet FS-1652 stomp shear
4ft x 16ga cap Model Number FS-1652H Brand Jet Overall Dimensions 62-1/2 X 78-1/4 X 41-1/2 Height 48 inch Width 42 inch Length 67 inch Net Weight 1014 pound Gross Weight 1089 pound Shearing Length Capacity (in.) 52 Front Gauge Capacity (in.) 28 Mild Steel Capacity (Gauge) 16 Back Gauge Capacity (in.) 30 -not included
FOOT SHEARS
Ideal for precision shearing of mild steel up to 16 gauge Two-way blade configuration provides twice the cutting life Upper blade is two-way; bottom blade is one-way 2° angle cutting edge; 1° face relief sells new for 2900.00
|
|
|
FOR SALE: Year - 1995 Make - Amada Model - M-3060 |
---|
FOR SALE: Ad # 15944 , Year = 1995 , Make = Amada , Model = M-3060 |
|
Category: Power Squaring Shear (Hydraulic)
|
Capacity: 10ft x 1/4" capacity
|
Ad #
15944 |
Year:
| 1995
|
Make:
| Amada
|
Model:
| M-3060
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Not Under Power
|
Shipping Info: | We can load
|
Weight: | 18550
|
Dimension: L x W x H | 175" L-R x 80" F-B x 68" H |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Amada M-3060 hyd shear
10ft x 1/4" capacity Model Year 1995 460/230v 3ph 60hz wired 460/3 Length - 120in Thickness - 0.236in Stroke - 6.0spm currently wired 220/3 Net Weight – 18,519lbs std mfg specs below-please verify actual machines.. SPECIFICATIONS: Capacity: 10' x 1/4" (Mild Steel) Length of Knives: 133" Gap: 11.8" Rake Angle Taper Per Foot: 1 Degree - 28' Speed: 60 SPM (Full Length Cuts) Distance Bed to Floor: 33" Hydraulic Holddowns Electromagnetic Clutch T-Slots in Table All Steel Frame Construction Stroke Cycle Selector EQUIPPED WITH: (SUBJECT TO BUYER VERIFICATION) 36" Front Operated Programmable Back Gauge Squaring Arm (10-ft. Long) (2) Front Support Arms Electric Foot Switch Operation Note: blades were flipped about a year ago and have at least another turn on them. Approximate Overall Dimensions: 175" L-R x 80" F-B x 68" H Approximate Weight: 20000 Lbs.
|
Electrical Description |
|
|
|
FOR SALE: Year - 2013 Make - Beverly Model - B-1 |
---|
FOR SALE: Ad # 14756 , Year = 2013 , Make = Beverly , Model = B-1 |
|
Category: Hand Operated Shears
|
Capacity: 14GA mild steel
|
Ad #
14756 |
Year:
| 2013
|
Make:
| Beverly
|
Model:
| B-1
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: |
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Beverly B-1 Hand Shear
The B-1 is the smallest of the three throatless shears weighing in at only 18 lbs. This light weight unit has the capacity to shear cleanly through 14 gauge mild steel or 18 gauge stainless. This is perfect for the home hobbyist and those working with braided hose or strap. 100% MADE IN USA Weight 18 lbs Shipping Weight 23 lbs Height Less Handle 14" Handle 18" Width 7" Depth 9" Lower Blade Length 4 1/4" Length of Cut 3" Capacity Steel 14 Gauge Capacity Stainless 18 Gauge Design and Operating Features of the Beverly Throatless Shear 1. Alloy steel rack and pinion gives great power with little effort. 2. Removeable handle for easy portability 3. Alloy steel body designed to give maximum rigidity and strength 4. Adjustable hold down (B-3 Model Only) 5. Highest grade blades have correct rake to provide clean, burr-free cutting. Blades are adjustable for wear and are quickly interchangeable. 6. Alloy steel pivot point. 7. 2 point lower blade adjustment. 8. Exclusive design of shoulder permits turning work to any shape or position. 9. Lower blade retaining clamp is keyed to keep blades tight and rigid. 10. Steel base drilled for mounting Shear on stand or bench.
|
|
|
FOR SALE: Year - 2013 Make - Baileigh Model - SF-5216E |
---|
FOR SALE: Ad # 14760 , Year = 2013 , Make = Baileigh , Model = SF-5216E |
|
Category: Foot Stomp & Air Operated Shear
|
Capacity: 4ft x 16ga
|
Ad #
14760 |
Year:
| 2013
|
Make:
| Baileigh
|
Model:
| SF-5216E
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Baileigh # SF-5216E foot shear
Description When looking for a high quality, economical foot shear for your shop, look no further than the SF- 5216E foot shear from Baileigh Industrial. The SF-5216E foot shear great for those small to medium shops or educational institutions that are on a budget. But the best thing is that the SF- 5216E is still is built to the same standards as all Baileigh Industrial equipment. The SF-5216E foot shear is able to shear 52” of 16 gauge mild steel. High chromium blades offer long life and have the ability to be resharpened. Front supports help the operator with alignment and an integrated back stop allows for repeatability of cut. A ridged cast frame rounds out the list of impressive features on the SF- 5216E. Specifications Item Number SF-5216E Minimum Height 14.1" 52" capacity x 16ga max includes back gage Note: like new little use!
|
|
|
FOR SALE: Year - 1973 Make - Promecam Model - GH630A |
---|
FOR SALE: Ad # 13453 , Year = 1973 , Make = Promecam , Model = GH630A |
|
Category: Power Squaring Shear (Hydraulic)
|
Capacity: 10ft x 1/4"
|
Ad #
13453 |
Year:
| 1973
|
Make:
| Promecam
|
Model:
| GH630A
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Rigging Fee Extra
|
Weight: | 15000
|
Dimension: L x W x H | 130" x 84" x 70" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- used Promecam hydraulic shear 10ft x 1/4"
model # GH630A Front Operated Power Back Gauge W/ Indicator, Square Arm, Power Rake and stroke Control, Auto Lube System Used Promecam Hydraulic Power Shear- cutting thickness 6mm or 1/4" cut length 10ft..w/open ended type bed design power back gage 35" squaring arm 40: front supports-shown rollers in table electric foot pedal operation Long Stroke: 17 Max. Cutting Length: 122" Rake Angle: 1/8" - 11/32" Capacity (mild steel): 1/4" Gap: 2 1/2" Number of Hold Downs (Hydraulic): 15 Back Gauge Range: 36" Strokes Per Minute: Short Stroke: 47 Horsepower: 12 3 sets of spare blades included votage 460/3 rigging/loading fee adder: $1000.00 Dimensions (L x D x H): 130" x 84" x 70" Weight: 14,700 LBS
|
Electrical Description |
|
|
|
FOR SALE: Year - 2008 Make - Roper Whitney Model - 152K |
---|
FOR SALE: Ad # 10481 , Year = 2008 , Make = Roper Whitney , Model = 152K |
|
Category: Foot Stomp & Air Operated Shear
|
Capacity: Foot operated: 52" x 16GA
|
Ad #
10481 |
Year:
| 2008
|
Make:
| Roper Whitney
|
Model:
| 152K
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 1000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Roper Whitney Pexto foot squaring shears are the industry's most accurate. They are easy to operate and offer precise shearing, long life and dependability. Shatter-proof transparent finger guards are among their safety features. All are provided with precise gauging and holddowns for cutting accuracy.
Maximum Rated Capacity :16 gauge mild steel Built to machine tool standards Triple-action shearing No. 152 shears offer triple-action shearing which includes relief on both edges of both the fixed and moving blades. It eliminates blade-to-blade friction, provides "bite" to eliminate sheet movement under shearing stress and produces double penetration in the cutting action. This contributes to easier operation. The No. 152 will handle a 52" sheet.
Specifications Characteristic No. 152 Maximum shearing length 52" Maximum back gauge range 25" Maximum front gauge range 30" Maximum slitting gauge range - 18" Floor space, gauges in position 60" x 76" " Max. rated capacity, mild steel 16 Ga..
Includes optional: manual 25" back gage and front support arms
|
Comments: |
- Very nice machine..blades look perfect as shown
|
|
|
FOR SALE: Year - 2013 ref Make - Beyeler Model - C3750 x 8 |
---|
FOR SALE: Ad # 15236 , Year = 2013 ref , Make = Beyeler , Model = C3750 x 8 |
|
Category: Power Squaring Shear (Hydraulic)
|
Capacity: 12ft x 5/16"
|
Ad #
15236 |
Year:
| 2013 ref
|
Make:
| Beyeler
|
Model:
| C3750 x 8
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Rigging Fee Extra
|
Weight: | 29000
|
Dimension: L x W x H | 177" x 85" x 82" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Beyeler #C3750 x 8 Hydraulic Shear
has been refurbished,gone thru well in 2012:electrically & mechanically Capacity: 12'-3"(147.5"max)(3750mm) x 5/16"(8mm) mild steel spare blade included blade gap adjustment for thinner or thick material 5-front support arms-some shown foot pedal built in ball table rollers light curtain on back side area programmable back gage with inch/metric display Note:refurbished in 2012 in switzerland -electrically & mechanically-looks new inside and out Rigging/Loading fee $1750.00
|
Electrical Description |
|
|
|
FOR SALE: Year - 2013 ref Make - Beyeler Model - C3750 x 8 |
---|
FOR SALE: Ad # 15236 , Year = 2013 ref , Make = Beyeler , Model = C3750 x 8 |
|
Category: Power Squaring Shear (Hydraulic)
|
Capacity: 12ft x 5/16"
|
Ad #
15236 |
Year:
| 2013 ref
|
Make:
| Beyeler
|
Model:
| C3750 x 8
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Rigging Fee Extra
|
Weight: | 29000
|
Dimension: L x W x H | 177" x 85" x 82" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Beyeler #C3750 x 8 Hydraulic Shear
has been refurbished,gone thru well in 2012:electrically & mechanically Capacity: 12'-3"(147.5"max)(3750mm) x 5/16"(8mm) mild steel spare blade included blade gap adjustment for thinner or thick material 5-front support arms-some shown foot pedal built in ball table rollers light curtain on back side area programmable back gage with inch/metric display Note:refurbished in 2012 in switzerland -electrically & mechanically-looks new inside and out Rigging/Loading fee $1750.00
|
Electrical Description |
|
|
|
FOR SALE: Year - 1993 Make - Accushear Model - 6250-10 |
---|
FOR SALE: Ad # 11294 , Year = 1993 , Make = Accushear , Model = 6250-10 |
|
Category: Power Squaring Shear (Hydraulic)
|
Capacity: 10ft x 1/4" Hyd. Shear
|
Ad #
11294 |
Year:
| 1993
|
Make:
| Accushear
|
Model:
| 6250-10
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | Requires rigger
|
Weight: | 17,000
|
Dimension: L x W x H | 147” x 85” x 83” |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 1993 Accushear 10ft x 1/4" capacity
20" ft-squaring arm 36" power back gage w/ display blade gap adj. lever 20HP 6250 Series 1/4" x 10ft Rated to shear structural quality steel with typical mechanical properties up to 80,000 tensile and 44,000 yield strengths. Standard Features • Pendant control c/w on/off buttons, mode selector switch, and stroke control dial. • Backgauge control includes LED display, inch or metric conversion, go-to-position function, 99 pre-select programs, hour meter, and stroke counter. • 36" backgauge travel with automatic swing up backstop at full extension. • 4-edged blades, top and bottom, modified high carbon, high chrome. • 3 position footswitch control. • squaring arm c/w steel rule with 1/16" and 1 mm increments. • Manual quick blade clearance adjustment. • Hand slots in table. • T-slot in front of table. • Shadow light and line. • Oil cooler Specifications Capacity: ¼” Length: 10’ Knife Style: 1” x 3” x 124” Number of holdowns: 16 Holddown tonnage: 16 Cycles per minute Full stroke: 23 Short Stroke 48 High Speed Full Stroke 38 Short Stroke 60 Motor H.P. 20 Overall dimensions: 147” x 85” x 83” Weight: 17,000 lbs Rigging/Loading fee: $600.00 quoted
|
Electrical Description |
|
Comments: |
- shear was used in a nascar race shop cutting light gage mtl..16ga-24ga
|
|
|
We found 18 matching ads. Now displaying the remaining 18 ads.
FOR SALE: Year - ? Make - Bantam Brake Model - B212 |
---|
FOR SALE: Ad # 14928 , Year = ? , Make = Bantam Brake , Model = B212 |
|
Category: Press Brakes (Hydraulic)
|
Capacity: 12 ton x 24" Pneumatic
|
Ad #
14928 |
Year:
| ?
|
Make:
| Bantam Brake
|
Model:
| B212
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 600
|
Dimension: L x W x H | 4 x 4 x 4' |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Bantam Brake # B212 pneumatic press brake
press brakes offer versatility and economy. This machine is a conveniently sized 2 foot 12 ton model. They perform numerous prototyping and production press brake functions including bending, flanging, hemming, flattening, staking, box forming and more. Each machine uses standard American-style, 5150 steel press brake tooling. A 90 deg top punch and 3/4 inch bottom vee die included. Additional features include adjustable stroke depth control, adjustable die spacing, tamper proof speed control valve, complete modular FRL unit with OSHA lockout, and a variable tonnage control. No need to worry about wiring, simply connect an air line. The conditioned air supply, standard, gives years of trouble fee service. Buy a press brake Made in America by experienced craftsmen Adjustable Stroke Depth Control is provided by the screw stop for precise repeatability. Raise the adjustable bed and shorten the ram stroke to maximixe productivity while reducing air consumption and minimizing the pinch point for safer operation. Adjustable Die Space handles numerous tool sets and reduces or eliminates the pinch point. Per OSHA guidelines, a die space gap of 1/4 inch or less is not a pinch point and provides the safest operation method. Loosen the bed and raise or lower it with the large bed elevating screws. Leveling of bed to ram is easily accomplished using this feature Ram Speed Control via an infinitely variable valve allows instant adjustment of air flow to the dual cylinders. A minimum setting creates a creep mode for setup, or select any other position to safely match ram speed with your job. Safety Hooded Foot Pedal controls all ram motion. Fully depress control pedal for down stroke. Slightly release pedal to stop advancing the ram. Completely release pedal at any time and the counter-balanced ram automatically retracts to the top of the stroke. For added safety, the ram retracts if air supply is removed. Modular FRL Unit is standard on all models to condition air supply to pneumatic components for long life. The unit consists of an adjustable filter/regulator module with pressure gauge, adjustable flow lubricator module and a three-way lockable shut-off valve. The valve is vented to relieve downstream pressure in the off position per OSHA guidelines. Keyed padlock and lockout tag are included. Variable Tonnage Control provided through the modular filter/regulator/lubricator unit delivers twelve or twenty-four tons of ram force to form up to 3/8 or 1/2 inch at maximum pressure. Lower the pressure to suit the job, reduce air consumption and preserve tooling. Type: pneumatic •Capacity: 12 ton •Working Length (inches): 24 •Strokes: 30 strokes per minute •Air Pressure (psi): 90 •Weight (pounds): 940 •Dimensions (LxWxH): 32 x 40 x 25 12 tons at 85 PSI, max 110psi 24" width 22" between housings foot pedal actuated 1-3/4" stroke 14" manual back gage 5" throat note: tooling shown included
|
|
|
FOR SALE: Year - 2006 Make - Durma Model - E-30160 |
---|
FOR SALE: Ad # 14406 , Year = 2006 , Make = Durma , Model = E-30160 |
|
Category: Press Brakes (Hydraulic)
|
Capacity: 176 ton x 120"/3meter/10ft bed
|
Ad #
14406 |
Year:
| 2006
|
Make:
| Durma
|
Model:
| E-30160
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Rigging Fee Extra
|
Weight: | 21500
|
Dimension: L x W x H | 140" x 65" x 108" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Durma Hyd Press brake # E-30160
Control: DU6000: 2 axis cnc back gage:X & R w/Z1 & Z2 manual adjust capacity:176 Ton bed length: 120"/10ft/3 meter distance between housing: 100" hp: 20 motor manual crowning feature palm button and or foot control-key switched stroke: 7.9" light curtain manuals included Note: very nice clean brake! ready to go! note: complete set of segmented European style Wilson tooling included was used on 18-20 ga stainless steel-see below E30160 - European style •42610LT (30°, TIP RADIUS (.030”)) o835mm o835mm •42610XT (30°, TIP RADIUS (.030”)) o15mm o20mm o20mm o40mm o40mm o50mm o50mm o100mm o100mm o100mm o100mm o200mm o200mm o300mm o300mm •40004LT (30°, V-OPENING, 14mm (.551”)) o835mm •42204X o10mm o15mm o20mm o40mm o40mm o40mm o50mm o50mm o50mm o100mm o100mm o100mm o200mm o200mm o300mm o300mm o300mm Note: rigging/loading fee extra approx: $1500.00
|
Electrical Description |
|
|
|
FOR SALE: Year - 2006 Make - Durma Model - E-40160 |
---|
FOR SALE: Ad # 14407 , Year = 2006 , Make = Durma , Model = E-40160 |
|
Category: Press Brakes (Hydraulic)
|
Capacity: 176 tons x 156"/4 meters/13 ft bed
|
Ad #
14407 |
Year:
| 2006
|
Make:
| Durma
|
Model:
| E-40160
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Rigging Fee Extra
|
Weight: | 25000
|
Dimension: L x W x H | 177"x 72" x 100" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Durma hyd press brake # E-40160
capacity:176 US tons control: DU600 cnc 2 axis back gage X & R front to back/up down control ,manual z1 & z2 adj. fingers bed length: 156"/4 meters/13ft ft dist between housing: 121" stroke: 7.9" hp:20 CNC crowning feature light curtain palm buttons and or foot switch-keyed manuals /cd Note:Very nice brake,ready to go! european tool style holder rigging/loading fee approx: $1800.00 comes with a complete set of European style Wilson segmented tooling was used on 18-20 ga Stainless steel included--see below list E40160 - European style tooling: •41909XT (30° HEMMING PUNCH) o10mm o15mm o20mm o40mm o50mm o100mm o100mm o200mm o300mm o835mm o835mm o835mm •41909LT (30° HEMMING PUNCH) o835mm •43595LT (HEMMING DIE, 10mm (.394”), V-OPENING) o835mm o835mm o835mm o835mm o835mm
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Roper Whitney Model - 422 |
---|
FOR SALE: Ad # 11563 , Year = , Make = Roper Whitney , Model = 422 |
|
Category: Straight Apron Brakes
|
Capacity: 4ft x 22ga
|
Ad #
11563 |
Year:
|
|
Make:
| Roper Whitney
|
Model:
| 422
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 210
|
Dimension: L x W x H | 4 x 1 x 1 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Length of bed 48 1/4"
Capacity on mild steel, nose bar very good shape 3/8" flange, full length 22 ga. ga. Minimum reverse bend 5/16"
Maximum lift of beam 7/8"
Shipping Weight 210 lbs.
|
|
|
FOR SALE: Year - 94 ? Make - Chicago Model - BPO-412-6 |
---|
FOR SALE: Ad # 11551 , Year = 94 ? , Make = Chicago , Model = BPO-412-6 |
|
Category: Finger Brakes-Box & Pan Brakes
|
Capacity: 4 ft x 12 Ga box & Pan
|
Ad #
11551 |
Year:
| 94 ?
|
Make:
| Chicago
|
Model:
| BPO-412-6
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 3000
|
Dimension: L x W x H | 5' x 3 x 4 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Chicago 4 ft x 12 ga box & pan brake
Very heavy duty Nose bar fingers look great Also includes: roll around casters-angle iron bending bar(not Shown) nice brake
|
|
|
FOR SALE: Year - 2013 Make - Baileigh Model - BB-4816E |
---|
FOR SALE: Ad # 14759 , Year = 2013 , Make = Baileigh , Model = BB-4816E |
|
Category: Finger Brakes-Box & Pan Brakes
|
Capacity: 4ft x 16ga
|
Ad #
14759 |
Year:
| 2013
|
Make:
| Baileigh
|
Model:
| BB-4816E
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Baileigh # BB-4816E
Baileigh BB-4816E Manual Sheet Metal Brake, 0 - 135 Degree Bend Angle, 16-Gauge Mild Steel Capacity 4ft x 16ga box & pan brake •Manually operated •16 gauge mild steel capacity •48-inches bending length •0 to 135 degrees bend angle custom tray/stand The Baileigh sheet metal brake is a great machine for the sheet metal fabricator who is a hobbyist, light fabricator, or local educational institution. This brake is perfect for fabricators on a budget, but do not what to sacrifice quality in the bend just because of the lower price. The BB-4816E is made to Baileigh Industrial standards and will provide years of trouble free use. For added rigidity the framework on the BB-4816E is made from fully welded steel plate. At maximum capacity this box and pan brake can bend up to 16 gauge mild steel sheet metal up to 48-inches wide. A counter weight apron lift assist gives the operator a break when bending at full capacity. The BB-4816E sheet metal brake also comes standard with a gap adjustment, 16 hardened fingers of varying lengths and a sturdy floor stand. Thickness (Stainless steel): 16 gauge mild steel/ (20 gauge)stainless; Stand: Yes; Bend angle: 0 – 135 degrees; Power: Manual operation Length: 48-inches.
|
|
|
FOR SALE: Year - Make - Roper Whitney Model - 816 |
---|
FOR SALE: Ad # 11480 , Year = , Make = Roper Whitney , Model = 816 |
|
Category: Straight Apron Brakes
|
Capacity: 8 ft x 16ga
|
Ad #
11480 |
Year:
|
|
Make:
| Roper Whitney
|
Model:
| 816
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 2000
|
Dimension: L x W x H | 9 ft x 3 x 4 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 8ft x 16GA
straight brake no angle iron bending bar included--not needed for light gage mtl-20ga up spare nose bar current nose bar looks very good
|
|
|
FOR SALE: Year - 80's ?? Make - Chicago Model - 812 |
---|
FOR SALE: Ad # 11417 , Year = 80's ?? , Make = Chicago , Model = 812 |
|
Category: Straight Apron Brakes
|
Capacity: Heavy Duty :8ft x 12GA straight brake
|
Ad #
11417 |
Year:
| 80's ??
|
Make:
| Chicago
|
Model:
| 812
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Chicago 8ft x 12GA straight brake
heavy duty nose bar looks good
|
|
|
FOR SALE: Year - 80's? Make - National Model - U6-7212 |
---|
FOR SALE: Ad # 11418 , Year = 80's? , Make = National , Model = U6-7212 |
|
Category: Finger Brakes-Box & Pan Brakes
|
Capacity: 6ft x 12 GA
|
Ad #
11418 |
Year:
| 80's?
|
Make:
| National
|
Model:
| U6-7212
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 2530
|
Dimension: L x W x H | 126 x 29 x 59" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- 6ft x 12 GA box & Pan Brake
16GA stainless steel rated max depth of box: 6"
National offers four heavy duty box and pan brakes made in the U.S.A. Standard with heavy body construction, precision bearings on the apron, two large cast iron counterweights and apron stop for repeat bends. The National name means quality.
Section fingers are precision machined from rolled steel bar stock for maximum strength. The fingers can be adjusted or removed quickly by the loosening of a cap screw. Heavy duty steel plates and tension bars are precision incorporated for minimum deflection
STD Finger widths: Qty:#5-3",#4-4", #7-5", #1-6", total 17
|
|
|
FOR SALE: Year - 1998 Make - Roper Whitney Model - 816 |
---|
FOR SALE: Ad # 11416 , Year = 1998 , Make = Roper Whitney , Model = 816 |
|
Category: Straight Apron Brakes
|
Capacity: 8ft x 16GA straight brake
|
Ad #
11416 |
Year:
| 1998
|
Make:
| Roper Whitney
|
Model:
| 816
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 3800
|
Dimension: L x W x H | 11 x 3 x 4 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Roper Whitney 816
8ft x 16ga straight brake nose bar looks good as shown
|
|
|
FOR SALE: Year - 2008 Make - National Model - N4812 |
---|
FOR SALE: Ad # 10479 , Year = 2008 , Make = National , Model = N4812 |
|
Category: Straight Apron Brakes
|
Capacity: 4ft x 12 GA -straight brake
|
Ad #
10479 |
Year:
| 2008
|
Make:
| National
|
Model:
| N4812
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 1050
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 4ft x 12 ga straight brake
like new National N4812 - 4' X 12 Gauge Straight Brake
These hand brakes are offered from National with a great deal of pride. A simple design, utmost strength with a long life of dependable service. Streamline designed for fast accurate bending even for the inexperienced workmen.
Features:
Heavy steel body construction Extra heavy tie rods for perfect alignment Precisions bearings on the apron assures smooth operation Made in USA
Easy to set up and operate All steel body construction with extra heavy duty tie rods for perfect alignment Capacity - 12 ga. (2.7 mm) mild steel, 16 ga. (1.6 mm) stainless steel Max. bending length - 49" Floor space with counter-weight - 95 x 27 x 55"
Specifications: N4812 Cap. (mild steel) 12 ga(2.7 mm) Cap. (stain. steel) 16 ga(1.6 mm) Bending Length 49" Shipping Weight (lbs) 1050 Floor Space 95x27x55
|
Comments: |
|
|
|
FOR SALE: Year - Make - Pro Former Model - |
---|
FOR SALE: Ad # 11310 , Year = , Make = Pro Former , Model = |
|
Category: Straight Apron Brakes
|
Capacity: 60" x 16GA
|
Ad #
11310 |
Year:
|
|
Make:
| Pro Former
|
Model:
|
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 60" bed
16GA capacity on a skid
|
|
|
FOR SALE: Year - 2008 Make - enco ? Model - 130-5610 |
---|
FOR SALE: Ad # 12283 , Year = 2008 , Make = enco ? , Model = 130-5610 |
|
Category: Finger Brakes-Box & Pan Brakes
|
Capacity: 3 in 1: brake , shear & roll
|
Ad #
12283 |
Year:
| 2008
|
Make:
| enco ?
|
Model:
| 130-5610
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 130
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- brake , shear & roll combo unit
brake:30" wide max mtl. shear: 30" x 20GA slip roll: 1-1/2" roll dia
|
|
|
FOR SALE: Year - 90's Make - Roper Whitney Model - MMB4141 |
---|
FOR SALE: Ad # 11296 , Year = 90's , Make = Roper Whitney , Model = MMB4141 |
|
Category: Finger Brakes-Box & Pan Brakes
|
Capacity: Magna bend 4ft x 16ga w/ foot pedal
|
Ad #
11296 |
Year:
| 90's
|
Make:
| Roper Whitney
|
Model:
| MMB4141
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: | We can load
|
Weight: | 300
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Electromagnetic Sheet Metal Bending Brake
Magnabend offers performance characteristics no conventional bending brake can match. The unique electromagnetic design of the keeper clamping system allows you to form many complex shapes not possible before. Plus, Magnabend can handle all regular shapes in light ferrous and non-ferrous sheet metal (up to 4' wide, 18 ga.) in a simpler, less time consuming and efficient manner.
The rugged simple construction incorporating only one moving part assures low maintenance and versatility for all light duty forming requirements.
A wide variety of complex shapes can be formed with Magnabend. These include rolled edges up 330°, partial length bends, closed shapes, unlimited depth for boxes and heavier material bends (up to 10 ga.) in shorter widths.
Design Features Assure Quality Simplicity is evident in Magnabend's electromagnetic design which eliminates a conventional upper beam and more complex finger arrangements. Keepers (clamping members) are simply positioned over the workpiece and are clamped in place electromagnetically when the bending beam is raised. Keepers self-adjust for material thickness as the apron moves.
Electromagnetic Design Magnabend Designed to eliminate the hindrance of an upper beam with the introduction of an elongated electromagnet and keeper system.
Self Locating A simple and effective method of locating the full length keeper is achieved by spring-loaded steel locator balls.
Triple Hinge System Three hinges allow Magnabend to have a lighter bending beam without limiting durability and reliability.
Bend-Angle Gauge Convenient bend angle gauge features adjustable stop for precise, efficient repeat bends.
Back Gauge Production efficiency in repeat bends is provided by adjustable back gauge.
Safety Features The safety button engages a light magnetic force on the keeper. As well as a safety device, this force is a convenient way to stabilize the work piece for precise measurement before you activate full clamping power. Specifications/Ordering Guide
Model MBB 4181 Input voltage: 115V, single phase, 60 hertz. Input current: 12 amps. Duty cycle: 20%
Maximum Bend Length: 49.38" - or 51" with manual location of keeper.
Full Length Bend Capacity: With 1.5" lip (extension piece fitted to bending beam) 18 Ga. in mild steel or non-ferrous material. (Typical Bend Radius - .16")
Minimum Reverse Bend: 1.5" with work support; .75" without work support.
Keepers (Clamping Members): Both models furnished with 11 keepers - 3/4", 1", 1 3/8", 1 7/8", 2 3/4", 3 3/4", 4 3/4", 6", 12", 21 5/8", and full length 51 1/4". foot pedal operation
Net Weight: 275 lbs. (Shipping weight 300 lbs.)
|
Electrical Description |
|
|
|
FOR SALE: Year - 2007 Make - Roper Whitney Model - MBB-4181 |
---|
FOR SALE: Ad # 12183 , Year = 2007 , Make = Roper Whitney , Model = MBB-4181 |
|
Category: Finger Brakes-Box & Pan Brakes
|
Capacity: magnabend 4ft x 16ga
|
Ad #
12183 |
Year:
| 2007
|
Make:
| Roper Whitney
|
Model:
| MBB-4181
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 300
|
Dimension: L x W x H | 4 x 3 x ? |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Roper Whitney Magna bed 4ft x 16ga
Electromagnetic Sheet Metal Bending Brake Magnabend offers performance characteristics no conventional bending brake can match. The unique electromagnetic design of the keeper clamping system allows you to form many complex shapes not possible before. Plus, Magnabend can handle all regular shapes in light ferrous and non-ferrous sheet metal (up to 4' wide, 18 ga.) in a simpler, less time consuming and efficient manner.
The rugged simple construction incorporating only one moving part assures low maintenance and versatility for all light duty forming requirements.
A wide variety of complex shapes can be formed with Magnabend. These include rolled edges up 330°, partial length bends, closed shapes, unlimited depth for boxes and heavier material bends (up to 10 ga.) in shorter widths.
Design Features Assure Quality Simplicity is evident in Magnabend's electromagnetic design which eliminates a conventional upper beam and more complex finger arrangements. Keepers (clamping members) are simply positioned over the workpiece and are clamped in place electromagnetically when the bending beam is raised. Keepers self-adjust for material thickness as the apron moves.
Electromagnetic Design Magnabend Designed to eliminate the hindrance of an upper beam with the introduction of an elongated electromagnet and keeper system.
Self Locating A simple and effective method of locating the full length keeper is achieved by spring-loaded steel locator balls.
Triple Hinge System Three hinges allow Magnabend to have a lighter bending beam without limiting durability and reliability.
Bend-Angle Gauge Convenient bend angle gauge features adjustable stop for precise, efficient repeat bends.
Back Gauge Production efficiency in repeat bends is provided by adjustable back gauge.
Safety Features The safety button engages a light magnetic force on the keeper. As well as a safety device, this force is a convenient way to stabilize the work piece for precise measurement before you activate full clamping power. Specifications/Ordering Guide
Model MBB 4181 Input voltage: 115V, single phase, 60 hertz. Input current: 12 amps. Duty cycle: 20%
Maximum Bend Length: 49.38" - or 51" with manual location of keeper.
Full Length Bend Capacity: With 1.5" lip (extension piece fitted to bending beam) 18 Ga. in mild steel or non-ferrous material. (Typical Bend Radius - .16")
Minimum Reverse Bend: 1.5" with work support; .75" without work support.
Keepers (Clamping Members): Both models furnished with 11 keepers - 3/4", 1", 1 3/8", 1 7/8", 2 3/4", 3 3/4", 4 3/4", 6", 12", 21 5/8", and full length 51 1/4".
Net Weight: 275 lbs. (Shipping weight 300 lbs.)
|
Electrical Description |
|
|
|
FOR SALE: Year - 2008 Make - Tennsmith Model - F64812 |
---|
FOR SALE: Ad # 12179 , Year = 2008 , Make = Tennsmith , Model = F64812 |
|
Category: Finger Brakes-Box & Pan Brakes
|
Capacity: 4ft x 12 ga box & pan
|
Ad #
12179 |
Year:
| 2008
|
Make:
| Tennsmith
|
Model:
| F64812
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 2000
|
Dimension: L x W x H | 6 x 3 x 4 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Used Tennsmith F6-4812 box & Pan brake
Capacity, mild steel 12 gauge/2.7 mm Capacity, stainless steel 16 gauge/1.6 mm Bending length 48 in./1220 mm Maximum lift of beam 1-1/2 in./12.7 mm Front to rear beam adjustment 1/2 in./12.7 mm Maximum depth of box 6 in./152.4 mm Minimum reverse bend 1/4 in./6 mm Minimum flnage in capacity material 1 in./25 mm Finger widths 3, 4 and 5 in. 76.3, 101.6 and 127 mm Dimensions, counterweights in place, L x W x H 72 x 49 x 56 in. 1829 x 1245 x 1425 mm Shipping weight 1725 lbs./783 kg Note: fingers look great but one 2" finger was slightly modified.as shown in pix..has extra fingers shown on bottom rack
|
|
|
FOR SALE: Year - 1997 Make - Betenbender Model - 50T x 12ft |
---|
FOR SALE: Ad # 14618 , Year = 1997 , Make = Betenbender , Model = 50T x 12ft |
|
Category: Press Brakes (Hydraulic)
|
Capacity: 12ft x 50 ton
|
Ad #
14618 |
Year:
| 1997
|
Make:
| Betenbender
|
Model:
| 50T x 12ft
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 13,000
|
Dimension: L x W x H | 152" x 48" x 87" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Betenbender Hydraulic press brake
50 Ton capacity x 12 ft bed manual clamp style back gage approx:175 hrs on machine(on time)very low no tooling included has tonnage control note:can be upgraded easily to a 70ton capacity for approx: $1500.00 rigging/loading onto flat bed truck fee:$1750.00
|
Electrical Description |
|
|
|
FOR SALE: Year - 90's? Make - Roper Whitney Model - U416 |
---|
FOR SALE: Ad # 11869 , Year = 90's? , Make = Roper Whitney , Model = U416 |
|
Category: Finger Brakes-Box & Pan Brakes
|
Capacity: 4 x 16ga finger brake
|
Ad #
11869 |
Year:
| 90's?
|
Make:
| Roper Whitney
|
Model:
| U416
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 600
|
Dimension: L x W x H | 4 x 2 x 4 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Roper Whitney 416
4ft x 16ga finger/box & Pan brake w stand Specifications Model U414 -factory specs below Length of bed 48 1/4" Capacity on mild steel, 1" flange, With bending bar and angle in place 16Ga With bending angle removed 20Ga With bending bar and angle removed -23Ga Minimum reverse bend (bar and angle removed) 1/4" Maximum lift of beam 1 1/4" Finger widths 2", 3", 4" Maximum depth of box 4" Front to rear adjustment of beam 5/8" Shipping Weight (without bench) 495 lbs. Bench (same used for light duty models) - Optional Bench Size - 56" long, 18" wide, 26" high
|
|
|
We found 8 matching ads. Now displaying the remaining 8 ads.
FOR SALE: Year - 1990's ? Make - Roper Whitney/custom Model - 9'-2-1/2" |
---|
FOR SALE: Ad # 11738 , Year = 1990's ? , Make = Roper Whitney/custom , Model = 9'-2-1/2" |
|
Category: Slip Rolls (Manual & Mechanicaly Operated)
|
Capacity: 9ft manual slip roll
|
Ad #
11738 |
Year:
| 1990's ?
|
Make:
| Roper Whitney/custom
|
Model:
| 9'-2-1/2"
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 9ft slip roll----110"-1/2" max length
16-18ga max thickness 3" dia std. rolls in very good condition on casters...stand nice unit-rare
|
|
|
FOR SALE: Year - Make - Enco Model - 36" |
---|
FOR SALE: Ad # 11737 , Year = , Make = Enco , Model = 36" |
|
Category: Slip Rolls (Manual & Mechanicaly Operated)
|
Capacity: 36"
|
Ad #
11737 |
Year:
|
|
Make:
| Enco
|
Model:
| 36"
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: |
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
|
|
FOR SALE: Year - Make - Pexto Model - custom |
---|
FOR SALE: Ad # 14761 , Year = , Make = Pexto , Model = custom |
|
Category: Slip Rolls (Manual & Mechanicaly Operated)
|
Capacity: 6ft x 16ga
|
Ad #
14761 |
Year:
|
|
Make:
| Pexto
|
Model:
| custom
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: | We can load
|
Weight: | 1200?
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Pexto custom extra long slip roll 6ft
capacity: 16ga mild steel custom stand roll dia : 3" length of bend:72" or 6ft note: rare find 72"length note: mounted on stand shown
|
|
|
FOR SALE: Year - 2014 Make - Grizzley Model - T25688 |
---|
FOR SALE: Ad # 14757 , Year = 2014 , Make = Grizzley , Model = T25688 |
|
Category: Slip Rolls (Manual & Mechanicaly Operated)
|
Capacity: 24" x 22ga
|
Ad #
14757 |
Year:
| 2014
|
Make:
| Grizzley
|
Model:
| T25688
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: |
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Grizzley # T25688 24" slip manual roll w/stand
24" max width capacity: 22ga mild steel roll dia: 1-5/8" wire size roll: 3/32,1/8",5/32" For those who want a little extra capacity over the 12" slip roll, our 24" fits the bill. Large handle crank and hardened, heavy-duty gearing gives you the mechanical advantage to roll mild steel up to 22 gauge. Features quick-release top roller and bushings found on larger slip rolls. Specifications: •Maximum capacity: 24" •Footprint: 7-1/4" x 28-1/8" •Roll diameter: 2" •Gauge: 22-gauge mild steel note: includes custom stand shown
|
|
|
FOR SALE: Year - ? Make - Pexto Model - 390E |
---|
FOR SALE: Ad # 12507 , Year = ? , Make = Pexto , Model = 390E |
|
Category: Slip Rolls (Manual & Mechanicaly Operated)
|
Capacity: 3ft 16-18ga
|
Ad #
12507 |
Year:
| ?
|
Make:
| Pexto
|
Model:
| 390E
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 1700
|
Dimension: L x W x H | 5 x 2 x 4 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Pexto slip roll # 390E
16-18 ga capacity 36" length 2.5" roller dia wire grooves stand crank handle needs re-welded
|
|
|
FOR SALE: Year - 2008 Make - Roper Whitney Model - 283D |
---|
FOR SALE: Ad # 10485 , Year = 2008 , Make = Roper Whitney , Model = 283D |
|
Category: Slip Rolls (Manual & Mechanicaly Operated)
|
Capacity: manual slip roll 24" -20GA
|
Ad #
10485 |
Year:
| 2008
|
Make:
| Roper Whitney
|
Model:
| 283D
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 300
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- 24" x 20 Ga cap
2" dia rolls wire grooves no stand 2ft X 20GA Man Slip roll
Work rolls of precision turned and ground high carbon steel. 2", 2 1/2", and 3" diameter rolls with wiring grooves and fully enclosed gear housings. 2" & 2 1/2" dia. have two driven rolls with 3rd roll drive optional; 3" has three driven rolls. Two handles provided for 2 1/2" & 3" sizes only. Upper roll lifts for convenient removal of workpiece. Bench mounted, with welded steel cabinet stand available. The rear rolls of No. 416 and No. 418 are provided with three full length longitudinal grooves.
|
|
|
FOR SALE: Year - 2001 Make - Ercolina Model - CE50H3 |
---|
FOR SALE: Ad # 13291 , Year = 2001 , Make = Ercolina , Model = CE50H3 |
|
Category: Angle Bending Rolls
|
Capacity: ring roller-max pipe capacity: 2-1/2"
|
Ad #
13291 |
Year:
| 2001
|
Make:
| Ercolina
|
Model:
| CE50H3
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 1200
|
Dimension: L x W x H | 5 x 4 x 4 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Ercolina Angle Roll Bender "Ring Roller"
model#CE50H3 machine has less than 50hrs est. run time (3) Roll drive, hydraulic center roll positioning with programming system. Shaft Dia: 50MM Std Roll : 7.0 Dia 178MM 2.5 HP 10 ton force drive rolls: 3 smooth Horizontal or vertical working center roll hydraulic controller: digital programmable foot pedal max pipe capacity: 2-1/2" Max Angle Iron Capacity: 2.5 x 2.5" x 1/4" Square: 2.5" x 2.5" x 0.120 min rad 24" round solid: 1-9/16" w/10" radius Bending speeds 20% faster than competitive machines ● Universal tooling set included with each machine ● Forged roll shafts precision ground and fitted for maximum performance and minimal deflection ● Heavy duty structure and rigid components for high section modulus ratings ● Reinforced engineered mainframe design proven to outperform competitive models ● Patented by Ercolina® simultaneous downfeed and roll movement to minimize deformation ● Programmable touchpad controls with digital center roll positioning display ● 40H3-50H3 hydraulic machine with memory storage with eight (8) individual programs and unlimited passes ● Remote pendent with low voltage controls and foot pedal switch ● Threaded roll shafts with micrometric flange adjustment helps eliminate spacer usage ● Inline direct drive roll shaft system ● Optional Anti-twist correction system for angle iron “Leg In” applications Equipped with programmable controls - eight individual programs, unlimited passes. Digital display of center roll position. Foot pedal for hands free operation included. Adjustable roller system for twist correction. Universal tooling included with machine. Adjust easily to bend "T" profile, Rectangle solids, angle, round solids, square solids, C channel. Rolling speed of 9 RPM. Forged alloyed steel drive shafts mounted in conical roller bearings reduce number of passes. Refer to catalog for machine capacities on assorted profiles.
Maximum Capacities: 2-1/2" Pipe, Schedule 40 (A53-A), 16" Minimum Radius 3" Tube, 0.083" Wall, 24" Minimum Radius 2-1/2" X 2-1/2" Square Tube, 0.120" Wall, 30" Minimum Radius 2-3/8" X 2-3/8" X 0.187" Angle (Leg-In), 22" Minimum Radius 2-3/8" X 2-3/8" X 0.187" Angle (Leg-Out), 20" Minimum Radius Materials based on yield strength of Mild Steel To roll maximum capacity materials Tie Bar Accessory will be required
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Enco Model - 4-16 |
---|
FOR SALE: Ad # 13747 , Year = , Make = Enco , Model = 4-16 |
|
Category: Slip Rolls (Manual & Mechanicaly Operated)
|
Capacity: 4ft x 16ga manual slip roller w/ stand
|
Ad #
13747 |
Year:
|
|
Make:
| Enco
|
Model:
| 4-16
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 400
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Manual slip roller
48" Slip Roll x 16ga 3" roll dia rolls are not pitted or gouged Comes with nice roll around stand
|
|
|
We found 22 matching ads. Now displaying the remaining 22 ads.
FOR SALE: Year - Make - Enco ? Model - 6" |
---|
FOR SALE: Ad # 11735 , Year = , Make = Enco ? , Model = 6" |
|
Category: Notching / Nibbler Machines
|
Capacity: 4 ton v notcher
|
Ad #
11735 |
Year:
|
|
Make:
| Enco ?
|
Model:
| 6"
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can skid machine
|
Weight: | 125
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
|
|
FOR SALE: Year - Make - Irvin Smith Model - 24" |
---|
FOR SALE: Ad # 11736 , Year = , Make = Irvin Smith , Model = 24" |
|
Category: Crimping, Beading & Flanging Machines
|
Capacity: 24" bead roller
|
Ad #
11736 |
Year:
|
|
Make:
| Irvin Smith
|
Model:
| 24"
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Irvin smith bead roller
24" throat stand no dies included
|
|
|
FOR SALE: Year - 60s Make - Diacra Model - No 2 |
---|
FOR SALE: Ad # 14389 , Year = 60s , Make = Diacra , Model = No 2 |
|
Category: Hole Punches: Single,Turret and CNC
|
Capacity:
|
Ad #
14389 |
Year:
| 60s
|
Make:
| Diacra
|
Model:
| No 2
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Diacra # 2 hole punch
4 ton refurbished 16ga capacity-approx 12" throat stand included several punches & dies included' Punch sizes includes-see picture 0.054 0.070 0.086 0.101 0.117 0.133 0.148 0.164 0.179 0.195 0.211 0.226 0.242 0.258 0.273 0.289 0.336 0.383 0.398 0.414 0.429 0.461 0.492 0.508 0.633 0.758 0.883 1.008 1.133 1.258 1.383 1.508 1.633 1.758 1.883 2.008
|
|
|
FOR SALE: Year - 60s Make - Diacra Model - No 2 |
---|
FOR SALE: Ad # 14389 , Year = 60s , Make = Diacra , Model = No 2 |
|
Category: Hole Punches: Single,Turret and CNC
|
Capacity:
|
Ad #
14389 |
Year:
| 60s
|
Make:
| Diacra
|
Model:
| No 2
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Diacra # 2 hole punch
4 ton refurbished 16ga capacity-approx 12" throat stand included several punches & dies included' Punch sizes includes-see picture 0.054 0.070 0.086 0.101 0.117 0.133 0.148 0.164 0.179 0.195 0.211 0.226 0.242 0.258 0.273 0.289 0.336 0.383 0.398 0.414 0.429 0.461 0.492 0.508 0.633 0.758 0.883 1.008 1.133 1.258 1.383 1.508 1.633 1.758 1.883 2.008
|
|
|
FOR SALE: Year - Make - Diacra Model - 12 |
---|
FOR SALE: Ad # 14390 , Year = , Make = Diacra , Model = 12 |
|
Category: Hole Punches: Single,Turret and CNC
|
Capacity: 4 ton- 1-3/4" cap
|
Ad #
14390 |
Year:
|
|
Make:
| Diacra
|
Model:
| 12
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 800
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Diacra turret hand punch #12(rotex type)
4 ton force,16ga cap in 1-3/4" die special auto turret alignment opener mechanism included for faster tooling changes 1.75" Diameter Punch x 16 Gauge Steel Capacity, with Steel Stand, and Assorted Dies. see manual @ http://neme- s.org/Shaper%20Books/DiAcro/12_&_18_Hand_Turret _Press_Manual.pdf 12 station turret 12" throat depth stand/base shown-included
|
|
|
FOR SALE: Year - 1997? Make - di-acro Model - 2P |
---|
FOR SALE: Ad # 14386 , Year = 1997? , Make = di-acro , Model = 2P |
|
Category: Notching / Nibbler Machines
|
Capacity: 6" x 6" corner/tab notcher-16ga-powered
|
Ad #
14386 |
Year:
| 1997?
|
Make:
| di-acro
|
Model:
| 2P
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Di-Acro Power corner/tab notcher
powered -foot pedal operation 6" x 6" notcher blades 16ga capacity-5 ton rated stroke 5/8" 1/2 HP motor 180SPM table : 12" x 24" max tab: 1" floor space: 24" x 26" x 72"
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Diacra Model - 12 |
---|
FOR SALE: Ad # 14390 , Year = , Make = Diacra , Model = 12 |
|
Category: Hole Punches: Single,Turret and CNC
|
Capacity: 4 ton- 1-3/4" cap
|
Ad #
14390 |
Year:
|
|
Make:
| Diacra
|
Model:
| 12
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 800
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Diacra turret hand punch #12(rotex type)
4 ton force,16ga cap in 1-3/4" die special auto turret alignment opener mechanism included for faster tooling changes 1.75" Diameter Punch x 16 Gauge Steel Capacity, with Steel Stand, and Assorted Dies. see manual @ http://neme- s.org/Shaper%20Books/DiAcro/12_&_18_Hand_Turret _Press_Manual.pdf 12 station turret 12" throat depth stand/base shown-included
|
|
|
FOR SALE: Year - Make - Proline Model - 36" |
---|
FOR SALE: Ad # 15358 , Year = , Make = Proline , Model = 36" |
|
Category: Forming & Shaping: Shrinker, Stretchers, English Wheels and Power Hammers
|
Capacity: ProLine 36 inch Cast Iron Planishing Hammer
|
Ad #
15358 |
Year:
|
|
Make:
| Proline
|
Model:
| 36"
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 900
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- The ProLine 36 inch Planishing Hammer is a floor standing unit, designed for forming or planishing compound curves in sheet metal. It is used in many industries, including automobile and aircraft restoration, race car fabrication, sheet metal stamping shops, artistic applications, etc. A ProLine planishing hammer takes the work out of metal work and saves the experienced metal worker hours of time, leading to increased production.
One huge advantage with the design of the Proline hammers is the foot pedal activation. By pressing the foot pedal down once the material is in place, you bring the dies together and start the air motor in one step. This not only allows for easy removal of your part when open, but gives very precise control of the pressure and allows for feathering off at the end of a shape. This is not possible with most planishing hammers that have a fixed die gap. The lower arm on these cast iron floor models can be lowered to accommodate an optional bottom anvil for deep parts. Other special anvils are available, which allow the operator to move the lower arm off-center without losing position. They feature heavy duty pneumatic motors and sturdy cast iron frames. Throat Depth (inches): 36 •Air Consumption: 0-6.5 •Air Pressure: 125 psi •Weight (pounds): 900 Description ProLine Planishing Hammers are designed for forming or planishing light gage sheet metal shapes. They can be used in numerous sheetmetal applications, including automobile and aircraft restoration, race car fabrication, sheetmetal stamping shops, etc. Benefits ProLine Planishing Hammers take the "work" out of metal work and saves the experienced metal man hours of time, leading to increased production. 36" throat, cast iron construction. Lower arm drops down to extend depth to 18", with optional anvil for deep parts. Shown with optional die rack, dies & foot pedal extension. Ease of die changes. Included All parts are machined and assembled in-house for total quality control. Finest grade cast iron frame. Air regulator with lubricator. 12-point Grade 8 bolts used throughout. Fine air control knob for easy operator adjustment. Made in the U.S.A. Special urethane cobalt blue paint. Electroless nickel plated parts. Note: Optional die set pictured available, made of S-7 tool steel, heat-treated and polished. Note: 2 machines available with options shown in picture one with portable dolly,cover.Both have some minor tooling & die holder racks. see all optional accessories available at http://ccookenterprises.com/proline-accessories.shtml Optional dies:http://ccookenterprises.com/proline-hammer-dies.shtml
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Proline Model - 36" |
---|
FOR SALE: Ad # 15358 , Year = , Make = Proline , Model = 36" |
|
Category: Forming & Shaping: Shrinker, Stretchers, English Wheels and Power Hammers
|
Capacity: ProLine 36 inch Cast Iron Planishing Hammer
|
Ad #
15358 |
Year:
|
|
Make:
| Proline
|
Model:
| 36"
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 900
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- The ProLine 36 inch Planishing Hammer is a floor standing unit, designed for forming or planishing compound curves in sheet metal. It is used in many industries, including automobile and aircraft restoration, race car fabrication, sheet metal stamping shops, artistic applications, etc. A ProLine planishing hammer takes the work out of metal work and saves the experienced metal worker hours of time, leading to increased production.
One huge advantage with the design of the Proline hammers is the foot pedal activation. By pressing the foot pedal down once the material is in place, you bring the dies together and start the air motor in one step. This not only allows for easy removal of your part when open, but gives very precise control of the pressure and allows for feathering off at the end of a shape. This is not possible with most planishing hammers that have a fixed die gap. The lower arm on these cast iron floor models can be lowered to accommodate an optional bottom anvil for deep parts. Other special anvils are available, which allow the operator to move the lower arm off-center without losing position. They feature heavy duty pneumatic motors and sturdy cast iron frames. Throat Depth (inches): 36 •Air Consumption: 0-6.5 •Air Pressure: 125 psi •Weight (pounds): 900 Description ProLine Planishing Hammers are designed for forming or planishing light gage sheet metal shapes. They can be used in numerous sheetmetal applications, including automobile and aircraft restoration, race car fabrication, sheetmetal stamping shops, etc. Benefits ProLine Planishing Hammers take the "work" out of metal work and saves the experienced metal man hours of time, leading to increased production. 36" throat, cast iron construction. Lower arm drops down to extend depth to 18", with optional anvil for deep parts. Shown with optional die rack, dies & foot pedal extension. Ease of die changes. Included All parts are machined and assembled in-house for total quality control. Finest grade cast iron frame. Air regulator with lubricator. 12-point Grade 8 bolts used throughout. Fine air control knob for easy operator adjustment. Made in the U.S.A. Special urethane cobalt blue paint. Electroless nickel plated parts. Note: Optional die set pictured available, made of S-7 tool steel, heat-treated and polished. Note: 2 machines available with options shown in picture one with portable dolly,cover.Both have some minor tooling & die holder racks. see all optional accessories available at http://ccookenterprises.com/proline-accessories.shtml Optional dies:http://ccookenterprises.com/proline-hammer-dies.shtml
|
Electrical Description |
|
|
|
FOR SALE: Year - 1998? Make - Roper Whitney Model - 3617 |
---|
FOR SALE: Ad # 14773 , Year = 1998? , Make = Roper Whitney , Model = 3617 |
|
Category: Crimping, Beading & Flanging Machines
|
Capacity: 18ga rotary former
|
Ad #
14773 |
Year:
| 1998?
|
Make:
| Roper Whitney
|
Model:
| 3617
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 500
|
Dimension: L x W x H | 3 x 4 x 5 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Roper Whitney 3617 powered beading/crimper former
Model: 3617 Capacity: 18 Gauge Throat: 13" Distance Between Ctrs: 3" Roll Speed: 40 RPM Motor: 3/4 HP, 230 or 460 Volt, 3 Phase Weight: 475 lbs. * Versatile machine designed for deep throat (Up to 13")beading crimping, and other roll operations. * Up to 18 gauge material. Back-geared, with steel horn, bronze bushed bearing and 1- piece frame. Mounted on floor stand w/ adjustable motor mount, "V" belt drive, and 3/4 H.P. geared head motor. * Unit includes gauges and spacing collars for all operations except flanging. Rolls ordered separately. ROLL SETS ARE ALL SOLD SEPARATELY-one included as shown
|
Electrical Description |
|
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - ? Make - Heck-trace -a- punch Model - #4 |
---|
FOR SALE: Ad # 13477 , Year = ? , Make = Heck-trace -a- punch , Model = #4 |
|
Category: Notching / Nibbler Machines
|
Capacity: 3/16" capacity steel
|
Ad #
13477 |
Year:
| ?
|
Make:
| Heck-trace -a- punch
|
Model:
| #4
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 650
|
Dimension: L x W x H | 48" x 30" x 62" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Heck trace-a-punch nibbler
Cutting Capacity: 3/16" Mild Steel: 0.186 Plastic: 4.725mm Cutting Capacity: 1/8" Stainless: 0.125" Exotic Metals: 3.175mm Throat: 16" Depth: 406mm Strokes Per Minute: 1200 Voltage: 220/440v. 3 Phase Dimensions (L x W x H): 48" x 30" x 62" Weight: 650 Lbs. Horsepower: 2 H.P. like new-very low hrs see demo here: http://www.youtube.com/watch?v=WUzHH7k6TAg
|
Electrical Description |
|
|
|
FOR SALE: Year - 2006 Make - Impoert Model - 4 ton |
---|
FOR SALE: Ad # 10579 , Year = 2006 , Make = Impoert , Model = 4 ton |
|
Category: Notching / Nibbler Machines
|
Capacity: corner V-notcher 6x6
|
Ad #
10579 |
Year:
| 2006
|
Make:
| Impoert
|
Model:
| 4 ton
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 300
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- v-notcher
6 x 6 4 ton capacity 16/18 ga stand included almost new condition
|
|
|
FOR SALE: Year - 1996 Make - Metalex Model - ISF-10025D |
---|
FOR SALE: Ad # 15242 , Year = 1996 , Make = Metalex , Model = ISF-10025D |
|
Category: Slip Rolls: Manual & Mechanicaly Operated
|
Capacity: 50" length x 16ga
|
Ad #
15242 |
Year:
| 1996
|
Make:
| Metalex
|
Model:
| ISF-10025D
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: | We can load
|
Weight: | 800
|
Dimension: L x W x H | 60" x 20" x 4' |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Metalex manual slip roll
50" length 16 ga capacity 3" dia rolls w/ wire grooves stand
|
|
|
FOR SALE: Year - ? Make - WA Whitney Model - #627 fabricator |
---|
FOR SALE: Ad # 15237 , Year = ? , Make = WA Whitney , Model = #627 fabricator |
|
Category: Hole Punches: Single,Turret and CNC
|
Capacity: 50 ton
|
Ad #
15237 |
Year:
| ?
|
Make:
| WA Whitney
|
Model:
| #627 fabricator
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Rigging Fee Extra
|
Weight: | 6000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- W.A. Whitney Hyd. Punch unit # 627
50 ton single end Fabricator punch capacity in mild steel: 9/16" dia in 1/2",2"dia in 1/4",3" dia in 3/16",5"dia in 10ga throat:36" wired 460/3 voltage,but can do 220/3 lots of tooling included-shown W.A. Whitney model 627 single station hydraulic punch, 30” back gauge, 36” throat, 152 gaging arm, 28XX tool holders, auto lock tool clamps, 9/16” hole thru ½” plate, 5” hole thru 10ga., large variety of tooling
|
Electrical Description |
|
|
|
FOR SALE: Year - ? Make - WA Whitney Model - #627 fabricator |
---|
FOR SALE: Ad # 15237 , Year = ? , Make = WA Whitney , Model = #627 fabricator |
|
Category: Hole Punches: Single,Turret and CNC
|
Capacity: 50 ton
|
Ad #
15237 |
Year:
| ?
|
Make:
| WA Whitney
|
Model:
| #627 fabricator
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Rigging Fee Extra
|
Weight: | 6000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- W.A. Whitney Hyd. Punch unit # 627
50 ton single end Fabricator punch capacity in mild steel: 9/16" dia in 1/2",2"dia in 1/4",3" dia in 3/16",5"dia in 10ga throat:36" wired 460/3 voltage,but can do 220/3 lots of tooling included-shown W.A. Whitney model 627 single station hydraulic punch, 30” back gauge, 36” throat, 152 gaging arm, 28XX tool holders, auto lock tool clamps, 9/16” hole thru ½” plate, 5” hole thru 10ga., large variety of tooling
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Motorsports fabrication Model - 36" |
---|
FOR SALE: Ad # 11301 , Year = , Make = Motorsports fabrication , Model = 36" |
|
Category: Shrinker/Stretchers, English Wheels, Power Hammers
|
Capacity: 36" throat
|
Ad #
11301 |
Year:
|
|
Make:
| Motorsports fabrication
|
Model:
| 36"
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- English Wheel
36" throat 20" work height 9" anvil assorted dies shown
|
|
|
FOR SALE: Year - Make - Proline Model - |
---|
FOR SALE: Ad # 11295 , Year = , Make = Proline , Model = |
|
Category: Shrinker/Stretchers, English Wheels, Power Hammers
|
Capacity: ProLine Planishing hammer
|
Ad #
11295 |
Year:
|
|
Make:
| Proline
|
Model:
|
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Proline planishing hammer
36" throat set of dies-shown roll around base ProLine Planishing Hammers are designed for forming or planishing light gage sheet metal shapes. They can be used in numerous sheetmetal applications, including automobile and aircraft restoration, race car fabrication, sheetmetal stamping shops, etc
The lower arm on these cast iron floor models can be lowered to accommodate an optional bottom anvil for deep parts. Other special anvils are available, which allow the operator to move the lower arm off-center without losing position. They feature heavy duty pneumatic motors and sturdy cast iron frames. Benefits: •ProLine Planishing Hammers take the "work" out of metal work and saves the experienced metal man hours of time, leading to increased production. •36" throat, cast iron construction. •Lower arm drops down to extend depth to 18", with optional anvil for deep parts. •Shown with optional die rack, dies & foot pedal extension. •Ease of die changes. Included: •All parts are machined and assembled in-house for total quality control. •Finest grade cast iron frame. •Air regulator with lubricator. •12-point Grade 8 bolts used throughout. •Fine air control knob for easy operator adjustment. •Made in the U.S.A. •Special urethane cobalt blue paint. •Electroless nickel plated parts. •Optional die set available, made of S-7 tool steel, heat-treated and polished.
|
|
|
FOR SALE: Year - 200? Make - Adams Performance Model - Positive shrinker |
---|
FOR SALE: Ad # 15199 , Year = 200? , Make = Adams Performance , Model = Positive shrinker |
|
Category: Forming & Shaping: Shrinker, Stretchers, English Wheels and Power Hammers
|
Capacity: 16ga
|
Ad #
15199 |
Year:
| 200?
|
Make:
| Adams Performance
|
Model:
| Positive shrinker
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 200
|
Dimension: L x W x H | 3 x 4 x 3 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Adams Performance-Positve shrinker-power hammer
included spare die holders as shown-several types available for sale from mfg. complete set of shrinker dies in machine throat depth: 10.5" voltage:110/1phase wall/beam mount bracket included-shown designed for approx.:approx 16ga and thinner metal Note:great for shaping sheet material-gas tank,fenders,body panels,ect. note: several dies available thru mfg as shown but not included as pictured in multiple die photo,only one set with machine
|
Electrical Description |
|
|
|
FOR SALE: Year - 200? Make - Adams Performance Model - Positive shrinker |
---|
FOR SALE: Ad # 15199 , Year = 200? , Make = Adams Performance , Model = Positive shrinker |
|
Category: Forming & Shaping: Shrinker, Stretchers, English Wheels and Power Hammers
|
Capacity: 16ga
|
Ad #
15199 |
Year:
| 200?
|
Make:
| Adams Performance
|
Model:
| Positive shrinker
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 200
|
Dimension: L x W x H | 3 x 4 x 3 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Adams Performance-Positve shrinker-power hammer
included spare die holders as shown-several types available for sale from mfg. complete set of shrinker dies in machine throat depth: 10.5" voltage:110/1phase wall/beam mount bracket included-shown designed for approx.:approx 16ga and thinner metal Note:great for shaping sheet material-gas tank,fenders,body panels,ect. note: several dies available thru mfg as shown but not included as pictured in multiple die photo,only one set with machine
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Tennsmith Model - HB97 |
---|
FOR SALE: Ad # 15915 , Year = , Make = Tennsmith , Model = HB97 |
|
Category: Brakes: Manual Hand
|
Capacity: 8ft x 18ga
|
Ad #
15915 |
Year:
|
|
Make:
| Tennsmith
|
Model:
| HB97
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: | We can load
|
Weight: | 1800
|
Dimension: L x W x H | 8ft x 3 ft x 5ft |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Tennsmith # HB97 hand brake
8ft x 18ga capacity note:nose edge is perfect other than some surface rust,was used mainly for 24ga
|
|
|
FOR SALE: Year - 1997? Make - Di-Acro Model - 2P |
---|
FOR SALE: Ad # 13882 , Year = 1997? , Make = Di-Acro , Model = 2P |
|
Category: Ironworkers: Notching and Nibblers
|
Capacity: 6" x 6" x 16ga powered
|
Ad #
13882 |
Year:
| 1997?
|
Make:
| Di-Acro
|
Model:
| 2P
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 750
|
Dimension: L x W x H | 4 x 4 x 6 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Di-Acro Power corner/tab notcher
powered -foot pedal operation 6" x 6" notcher blades 16ga capacity-5 ton rated stroke 5/8" 1/2 HP motor 180SPM table : 12" x 24" max tab: 1" floor space: 24" x 26" x 72"
|
Electrical Description |
|
|
|
FOR SALE: Year - 1997? Make - Di-Acro Model - 2P |
---|
FOR SALE: Ad # 13882 , Year = 1997? , Make = Di-Acro , Model = 2P |
|
Category: Ironworkers: Notching and Nibblers
|
Capacity: 6" x 6" x 16ga powered
|
Ad #
13882 |
Year:
| 1997?
|
Make:
| Di-Acro
|
Model:
| 2P
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 750
|
Dimension: L x W x H | 4 x 4 x 6 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Di-Acro Power corner/tab notcher
powered -foot pedal operation 6" x 6" notcher blades 16ga capacity-5 ton rated stroke 5/8" 1/2 HP motor 180SPM table : 12" x 24" max tab: 1" floor space: 24" x 26" x 72"
|
Electrical Description |
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 80's? Make - Greenlee Model - 882 |
---|
FOR SALE: Ad # 14509 , Year = 80's? , Make = Greenlee , Model = 882 |
|
Category: Benders-Pipe and Tube
|
Capacity: 2" max pipe to 2 EMT rigid conduit
|
Ad #
14509 |
Year:
| 80's?
|
Make:
| Greenlee
|
Model:
| 882
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 200
|
Dimension: L x W x H | 4 x 3 x 4 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Greenlee hydraulic tube bender
Capacity 882-1-1/4", 1-1/2" and 2" EMT 12 ton ram cylinder Simple, accurate and easy to use. • Flip-Top hinged frame top plate opens for easy, fast loading and unloading. • Ram travel scale and charts for accurate bends, offsets and saddles. 2" pipe max to 2 EMT rigid conduit bends up to 90 degrees includes 3 pipe dies 1-1/2", 1-3/4", 2" uses std.mittler 9000 series dies includes push button hand control nice roll around stand 110/1 voltage hyd power pak specs below: Greenlee hydraulic power pump 1-1/2 hsp- 960PS/960ME Operation 120 VAC 1-1/2 HP (1.12 kW) Capacity 10,000 psi (700 bar); 300 inch3 (4.8 L) per minute rapid advance; 54 inch3 (.9 L) per minute at full pressure Length 12" (305 mm) Width 10-3/4" (223 mm) Height 22-5/16" (567 mm) Useable oil volume: 6-1/4 quarts (5.9 liters) For use with all Greenlee benders. Solid state controls for added reliability. Low pressure for fast ram advance, automatically changes to low volume high pressure. Pendant control
|
Electrical Description |
|
|
|
We found 7 matching ads. Now displaying the remaining 7 ads.
FOR SALE: Year - Make - Diacro Model - No. 12 |
---|
FOR SALE: Ad # 9001 , Year = , Make = Diacro , Model = No. 12 |
|
Category: Manual: Hole / Turret Punches
|
Capacity: manual "rotex type" turret punch
|
Ad #
9001 |
Year:
|
|
Make:
| Diacro
|
Model:
| No. 12
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 500 lbs
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 12 Station Punch (Rotex Type)-
manual turret hole punch 4 ton force will do 1-1/2" hole in 16ga mtl max hole/die size 1-3/4"? Throat:12-1/2" Punches:1/8,3/16,1/4,5/16,3/8,7/16,1/2,5/8,3/4,7/8 ,1,1-1/2. New paint, plating and polishing. Punches are useable but need to be sharpened for a burr free holes. stand included Great machine for small parts, race shop or hobby shop. was completely refurbished manual included
|
|
|
FOR SALE: Year - 1997 Make - Scotchman Model - 4014C |
---|
FOR SALE: Ad # 12999 , Year = 1997 , Make = Scotchman , Model = 4014C |
|
Category: Ironworkers
|
Capacity:
|
Ad #
12999 |
Year:
| 1997
|
Make:
| Scotchman
|
Model:
| 4014C
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 2100
|
Dimension: L x W x H | 57 x 52 x 58" H |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 1997 Scotchman Ironworker # 4014C
Specifications:• Capacity (tonnage) 40 • Throat 6" • Shears: Angle @ 90 deg 3" x 3" x 5/16" Miter (45°) 2" x 2" x 1/4" 40 strokes per min max • Hole Punching capacities: 3/4 Mild steel 5/8" 1/2" Mild steel 1" 3/8" Mild steel 1-1/4" • Flat bar shear: 1/2" Mild steel 8" 3/8" Mild Steel 10" 1/4" Mild Steel 12" 3/16" Mild steel 14" 14" max flat bar shear includes 12" brake, angle iron shear..as shown deluxe punch kit-lots of them approx 25-all new punches
machine like new never used
|
Electrical Description |
|
Comments: |
- machine like new never used
|
|
|
FOR SALE: Year - 80's? Make - Iron crafter Model - 30-30 |
---|
FOR SALE: Ad # 14468 , Year = 80's? , Make = Iron crafter , Model = 30-30 |
|
Category: Ironworkers
|
Capacity: 30 ton-single phase 110/1
|
Ad #
14468 |
Year:
| 80's?
|
Make:
| Iron crafter
|
Model:
| 30-30
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 2000
|
Dimension: L x W x H | 5 x 3 x 5 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Iron Worker: Iron Crafter
single phase 110/1 Model 30-30 30 Ton 2” stroke capacities: punch: 1" hole thru 3/8" MS\ild steel flat bar:1/2" x 6" angle iron:3" x 3" x 1/4" mitre angle iron @ 45 deg : 2 x 2 x 1/4" round:1" square: 3/4" 120V single phase Large quantity of tooling over 75 punches & dies many new also oversize hole punch plate tooling and cusom punch holder table. Great home shop or farm machine!
|
Electrical Description |
|
|
|
FOR SALE: Year - 1981 Make - scotchman Model - 4014-TM |
---|
FOR SALE: Ad # 12664 , Year = 1981 , Make = scotchman , Model = 4014-TM |
|
Category: Ironworkers
|
Capacity: 40 ton w/ 6 station punch turret
|
Ad #
12664 |
Year:
| 1981
|
Make:
| scotchman
|
Model:
| 4014-TM
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 1800
|
Dimension: L x W x H | 5 x 4 x 5 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Scotchman Ironworker
Model 4014-TM 40 ton w/ 6 station punch turret 5 HP 220/1 single Phase-home shop ready!!!! Specifications: Punch tonnage 40 ton Punch capacity 1" through 1/2" Flat bar shearing length 14" Flag bar shearing capacity 5/8" x 5" to 3/16" x 14" Angle shear capacity 3" x 3" x 1/4" Channel 2" max. Round bar 3/4" Square bar 3/4" Hydraulic system pressure 1450 Approximate dimensions 4' x 2' x 5' high Approximate weight 2,000 lbs. Included acc: brake & angle shear ,plus lots of punches & flat bar shear adj. stop rod
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 1992 Make - Scotchman Model - 4014-CM |
---|
FOR SALE: Ad # 13893 , Year = 1992 , Make = Scotchman , Model = 4014-CM |
|
Category: Ironworkers
|
Capacity: 40 Ton Hyd.
|
Ad #
13893 |
Year:
| 1992
|
Make:
| Scotchman
|
Model:
| 4014-CM
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 1200
|
Dimension: L x W x H | 31" x 49" x 61" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Scotchman 4014-CM Ironworker
40 Ton Punch Station (1" in 1/2") Keyed Punch Ram for Safety 3HP 6" Throat Depth 2" Die Holder 8" brake acc included angle iron shear included shear stop arm-included Punch Nut with Wrench and Stripper One Round Punch & Die: Max. Dia. 1" Adjustable Stroke Control Angle Shear Capacity: 3" x 3" x 5/16" at 90° and 2" x 2" x 1/4" at 45° 14" Flat Bar Shear with 4-Way Reversible Blade (1/2" x 6", 3/16" x 14") Tool Table Work Area Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations 230 volt /3 Phase Electrics (All Guards Necessary to Comply with ANSI B 11-5 Standards Fork Lift Accommodations Made in USA Note:Nice unit: angle shear included Also lots of misc punches and punch table fixtures Std. factory specs below Rated on: 65,000 PSI Tensile A 36 Mild Steel Punching Capacity 40 Ton 1" in 1/2" Special Tooling 2-1/4" Max.Dia Throat Depth 6" /150 mm Flat Bar Shear 14" Length 1/2" x 6" 3/8" x 10" 1/4" x 12" 3/16" x 14" Opt. Saber Blade 1/2" x 8" or 1/4" x 14" Angle Shear 90 3" x 3" x 5/16" Angle Shear 45 2" x 2" x 1/4" Brake 8" 25 Ton Brake 12" 20 ton -optional Pipe Notcher Schedule 40 I.D. 3/4", 1",1-1/4", 1-1/2", 2" -optional Rectangle Notcher 2" x 1-3/4" x 1/4"-optional 90 V. Notcher 6" x 6" x 1/8" Rod/Angle Combo-optional Angle Shear:2" x 2" x 1/4" Round Rod:3/4" Max Square Rod :3/4" Max Square Tube Shear 1/2" to 1", 14 ga. Max Picket Tool 1/2", 3/4" & 1" Strokes/minute in light material 1/4" Stroke 40 spm Strokes/minute in heavy material 3/4" Stroke 17 spm Hydraulics 1350 psi Motors Standard 3 hp 3 ph 230/3 motor Dimensions W - 26" L - 50" H - 53" W Weight 1,117 lbs 532 kg
|
Electrical Description |
|
|
|
FOR SALE: Year - 1989 Make - Uni-hydro Model - 65 -14 |
---|
FOR SALE: Ad # 13883 , Year = 1989 , Make = Uni-hydro , Model = 65 -14 |
|
Category: Ironworkers
|
Capacity: 65 ton
|
Ad #
13883 |
Year:
| 1989
|
Make:
| Uni-hydro
|
Model:
| 65 -14
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 2500
|
Dimension: L x W x H | 4 x 6 x 6' |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Uni-hydro 65 ton ironworker model#65-14
punch station, shear station, angle iron lots of misc size/shape punches included approx :30pc 4" x 4" x 1/2" angle shear capacity flat bar shear: 1" x 6" or 3/4" x 8" or 1/2" x 12" mtl stop on angle iron station 36"squaring arm on shear 12" flat bar shear max length lots of punches & dies includded in bucket shown
|
Electrical Description |
|
|
|
FOR SALE: Year - 1978 Make - Rotex Model - 18 BCH - D |
---|
FOR SALE: Ad # 13150 , Year = 1978 , Make = Rotex , Model = 18 BCH - D |
|
Category: Powered: Hole / Turret Punches
|
Capacity: 18 ton-hyd acuaction 25-30 tons force
|
Ad #
13150 |
Year:
| 1978
|
Make:
| Rotex
|
Model:
| 18 BCH - D
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 2500
|
Dimension: L x W x H | 4 x 4 x 6 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Rotex Model 18 BCH - D
25-30 tons of force 24" throat 18 stations 2" max punch size Hydralic acuation Powered 25-30 ton
Example of punch capacity thicknesses@25tons in mild steel: 1/2" hole thru 1/2" , 3/4" hole thru 7/16",1" hole thru 5/16", 1-1/2" hole thru 3/16", 2" hole thru 1/8"
Punch Sizes in machine-below 3/8-round 7/16-round 1/2" square 1" round 1-1/32-round 1-3/16-round 2" x 0.75 slot Note: Punches may be Dull & a few empty spaces
|
Electrical Description |
|
|
|
We found 6 matching ads. Now displaying the remaining 6 ads.
FOR SALE: Year - 2000 Make - Miller Model - 354MP |
---|
FOR SALE: Ad # 12997 , Year = 2000 , Make = Miller , Model = 354MP |
|
Category: Mig & Tig Arc Welders
|
Capacity: miller 354MP Mig welder
|
Ad #
12997 |
Year:
| 2000
|
Make:
| Miller
|
Model:
| 354MP
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Miller 354MP welder w/miller 22A wire feed system shown
very low hrs-like new condition 300Amp at 3 phase or 225A at single phase These power sources feature built-in programs for 4000 and 5000 series aluminum wire. To begin welding, select the program that matches your wire size and type. After that, they set up like a conventional MIG system: pick a wire feed speed and turn the trim control to find the correct arc length. You never have to modify pulsing parameters to maintain good welding conditions for different wire speeds or trim settings. Using this system, operators feel very comfortable switching to pulsed MIG because it's "familiar".
The Invision 354 and 456 MP provide optimized performance with Miller's standard wire feed systems for MIG welding aluminum, such as the XR™ feeder and XR-Edge™with gooseneck gun. You do not need a programmable feeder or pulsing pendant.
|
Electrical Description |
|
|
|
FOR SALE: Year - 200? Make - Miller Model - MSW-41T |
---|
FOR SALE: Ad # 12892 , Year = 200? , Make = Miller , Model = MSW-41T |
|
Category: Spot Welders
|
Capacity: portable spot welder-1.5KVA
|
Ad #
12892 |
Year:
| 200?
|
Make:
| Miller
|
Model:
| MSW-41T
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 150
|
Dimension: L x W x H | 3 x 1' x 3 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Miller portable spot welder
cycle timer foot pedal 18" throat 1.5 KVA
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 200? Make - Miller Model - MSW-41T |
---|
FOR SALE: Ad # 12892 , Year = 200? , Make = Miller , Model = MSW-41T |
|
Category: Spot Welders
|
Capacity: portable spot welder-1.5KVA
|
Ad #
12892 |
Year:
| 200?
|
Make:
| Miller
|
Model:
| MSW-41T
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 150
|
Dimension: L x W x H | 3 x 1' x 3 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Miller portable spot welder
cycle timer foot pedal 18" throat 1.5 KVA
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 2008? Make - miller Model - MSW-41T |
---|
FOR SALE: Ad # 14387 , Year = 2008? , Make = miller , Model = MSW-41T |
|
Category: Spot Welders
|
Capacity: portable spot welder 1.5kva
|
Ad #
14387 |
Year:
| 2008?
|
Make:
| miller
|
Model:
| MSW-41T
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 150
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Miller portable spot welder #MSW-41T
cycle timer foot pedal 18" throat 1.5 KVA Note: very nice unit little use on it
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Lincoln Model - Tig-355: 10056 |
---|
FOR SALE: Ad # 15238 , Year = , Make = Lincoln , Model = Tig-355: 10056 |
|
Category: Mig & Tig Arc Welders
|
Capacity: 350AMP welder: stick or TIG
|
Ad #
15238 |
Year:
|
|
Make:
| Lincoln
|
Model:
| Tig-355: 10056
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 400
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Lincoln # TIG-355 welder-square wave Tig # 10056 stock # LB048653
single phase: 230/460/575 amps:42/21/17 stick or tig 350 amps roll around cart Manual 2 Tig guns
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Lincoln Model - Tig-355: 10056 |
---|
FOR SALE: Ad # 15238 , Year = , Make = Lincoln , Model = Tig-355: 10056 |
|
Category: Mig & Tig Arc Welders
|
Capacity: 350AMP welder: stick or TIG
|
Ad #
15238 |
Year:
|
|
Make:
| Lincoln
|
Model:
| Tig-355: 10056
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 400
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Lincoln # TIG-355 welder-square wave Tig # 10056 stock # LB048653
single phase: 230/460/575 amps:42/21/17 stick or tig 350 amps roll around cart Manual 2 Tig guns
|
Electrical Description |
|
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
FOR SALE: Year - Make - Model - #2 |
---|
FOR SALE: Ad # 15832 , Year = , Make = , Model = #2 |
|
Category: Manual Arbor Press
|
Capacity: 2 ton
|
Ad #
15832 |
Year:
|
|
Make:
|
|
Model:
| #2
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: | We can load
|
Weight: | 50
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 2 ton hand arbor press
several bases included
|
|
|
FOR SALE: Year - 1995 Make - Sunnen Model - BP10/K |
---|
FOR SALE: Ad # 15821 , Year = 1995 , Make = Sunnen , Model = BP10/K |
|
Category: Hydraulic H-Frame Press
|
Capacity: 10 ton hydraulic
|
Ad #
15821 |
Year:
| 1995
|
Make:
| Sunnen
|
Model:
| BP10/K
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 200
|
Dimension: L x W x H | 2 x 1 x 3 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Sunnen # BP10/k piston press
10 Ton bench top unit Hyd. Actuated Foot pedal control 12" stroke 12" wide housing 6" deep housing 110/1 voltage very nice !
|
Electrical Description |
|
|
|
FOR SALE: Year - 2008 Make - Snap on Model - 20 ton |
---|
FOR SALE: Ad # 14611 , Year = 2008 , Make = Snap on , Model = 20 ton |
|
Category: Hydraulic H-Frame Press
|
Capacity: pneumatic/hyd.: 20 ton H-frame press
|
Ad #
14611 |
Year:
| 2008
|
Make:
| Snap on
|
Model:
| 20 ton
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 400
|
Dimension: L x W x H | 4 x 1 x 7 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- snap-on 20 ton pneumatic/hydraulic
H-frame shop press includes foot pedal pneumatic actuation unit tooling shown 24" wide opening?? verify
|
Electrical Description |
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - 200? Make - Hypertherm Model - Powermax 1250/G3 # 087008 |
---|
FOR SALE: Ad # 12998 , Year = 200? , Make = Hypertherm , Model = Powermax 1250/G3 # 087008 |
|
Category: Hand Held Torch
|
Capacity: 1-1/8" capacity-hand torch
|
Ad #
12998 |
Year:
| 200?
|
Make:
| Hypertherm
|
Model:
| Powermax 1250/G3 # 087008
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 100
|
Dimension: L x W x H | 23 x 11 x 20 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- The Powermax 1250/G3 w/1-1/8" max cutting capacity
w/ T80 hand air plasma torch 7/8" recomended capacity severance capacity 1-1/2" 25-80 amps variable 200-600V 1 or 3 phase Never used-like new condition Powermax G3 Series. With new technologies in both power supply and torch, it cuts faster and more economically than any system available today. In fact, it cuts 80% faster on 1-inch (25 mm) mild steel than any competitor tested. Its Auto- voltage™ circuit provides automatic adjustment to any input voltage from 200 to 600 volts, 1- or 3- phase. A state-of-the-art, microprocessor-based architecture assures optimum system reliability. Add to this Hypertherm's advanced torch technology and easy-to-read controls, and you have the most advanced plasma cutter money can buy •Auto-voltage™ automatically adapts to any incoming power from 200 V – 600 V, 1- or 3-phase. •Coaxial-assist™ jet technology delivers fast cut speeds. •Boost Conditioner™ compensates for input voltage variations, providing improved performance on low- line voltage, on motor generators and on fluctuating input power. •Reliability-focused design improves uptime and maximizes return on investment. •CNC interface and Easy Torch Removal (ETR™) provide increased versatility for handheld and mechanized usage. •Power Supply •T80 Torch with 25' leads •Spare Consumables •Work Cable and Clamp 15' (4.6 mm) Includes: power supply, T80 torch, spare consumables, work cable w/clamp, power cable, air filter kit,
|
Electrical Description |
- 200-575 single or 3 phase
|
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
FOR SALE: Year - 2007? Make - phase 2 Model - 900-375 |
---|
FOR SALE: Ad # 14153 , Year = 2007? , Make = phase 2 , Model = 900-375 |
|
Category: Hardness Testers
|
Capacity:
|
Ad #
14153 |
Year:
| 2007?
|
Make:
| phase 2
|
Model:
| 900-375
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 250
|
Dimension: L x W x H | 26" H x 18.2" W x 9.4 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Phase 2 # 900-375 Hardness tester
tests both Rockwell hardness and Superficial Rockwell hardness in one unit, with state of the art design and dynamic precision only found at Phase II. The Phase II Twin Rockwell/Superficial Rockwell hardness tester is ruggedly engineered to obtain highly sensitive and accurate readings. Conforming to ASTM E-18 Rockwell hardness standards, this hardness tester will offer unmatched repeatability in all Rockwell hardness scales. A perfect performer suited for any environment including heat treatment facilities, tool rooms, workshops, laboratories and inspection labs •Direct analog dial reading •Advanced design, easy to operate •Engineered to obtain highly sensitive and accurate readings •Conforms to ASTM E-18 The 900-375 analog hardness tester is one of Phase II most popular units as it measures in both the rockwell and superficial scales. The 900-375 has a state of the art design and dynamic precision only found at Phase II. The Phase II Twin Rockwell/Superficial Rockwell hardness tester is ruggedly engineered to obtain highly sensitive and accurate readings. Conforming to ASTM E-18 Rockwell hardness standards, this hardness tester will offer unmatched repeatability in all Rockwell and superficial hardness scales. A perfect performer suited for any environment including heat treatment facilities, tool rooms, workshops, laboratories and inspection labs. Lifetime technical support is included with all Phase II Hardness Testers. Features: Direct analog dial reading Advanced design, easy to operate Engineered to obtain highly sensitive and accurate readings Conforms to ASTM E-18 Specifications: Minor Load: 3 Kgf, 10 Kgf Major Load: 15Kgf, 30Kgf, 45Kgf, 60 Kgf, 100 Kgf, 150 Kgf Test Force Application: Dead Weight Test Force Control: Manual Results Display: Dual Scale Dial Vertical Capacity: 6.0" Throat Depth: 5.5" Height: 26.0" Width: 18.2" Depth: 9.4" Shipping Weight: 250 lbs Hardness Scales: HRA B,C,D,E,F,G,H,K , L, M (superficial) HR15N, HR15T, HR30N, HR30T, HR45N, HR45T std Accessories:please verify with used unit Diamond Conical Indentor 1/16" Ball Indentor 2- HRC Test Blocks 1- HRB Test Block 1- HR15N Test Block 1- HR30N Test Block 1- HR45T Test Block Test Table 5.87" (150mm) Flat Anvil 2.5" (63mm) Std. Vee Anvil Accessory Case Dust Cover
|
|
|
FOR SALE: Year - Make - Phase -2 Model - 900-330 |
---|
FOR SALE: Ad # 13779 , Year = , Make = Phase -2 , Model = 900-330 |
|
Category: Hardness Testers
|
Capacity: rockwell type hardness tester B & C scales plus
|
Ad #
13779 |
Year:
|
|
Make:
| Phase -2
|
Model:
| 900-330
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 170
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Phase 2 hardness tester
Rockwell B & C scales complete kit w/ anvils base resting feet
ROCKWELL SYSTEM -std factory specs below
FOR TESTING ON THE FOLLOWING SCALES: A, B, C, D, E, F, G, H AND K (SOME SCALES USE OPTIONAL PENETRATORS
FEATURES: DESIGNED FOR MEASURING HARDNESS OF METALS AND ALLOYS OF ALL KINDS, HARD OR SOFT, WHETHER FLAT, ROUND OR IRREGULAR IN SHAPE HARDNESS TESTER IS SIMPLE IN DESIGN AND EASY TO OPERATE, YET SENSITIVE AND ACCURATE TESTING RESULTS CAN BE OBTAINED WITH THESE TESTERS THESE PRECISION MATERIAL TESTING INSTRUMENTS ARE IDEALLY SUITABLE FOR LABORATORIES, TOOLROOMS, INSPECTION DEPARTMENTS, SCHOOLS, HEAT TREAT DEPARTMENTS AND FACTORIES. CONFORMS TO ALL INTERNATIONAL STANDARDS COMES COMPLETE WITH STANDARD ACCESSORIES SHOWN BELOW -please verify actual machine STANDARD ACCESSORIES: 5 3/4" TESTING TABLE 2 3/16" TESTING TABLE 2 3/16" TESTING TABLE w/V-GROOVE 120 DEGREE DIAMOND PENETRATOR 1/16" STEEL BALL PENETRATOR 1PC ROCKWELL A TEST BLOCK 1PC ROCKWELL B TEST BLOCK 3PCS ROCKWELL C TEST BLOCK TOOL KIT INSTRUCTION MANUAL DUST COVER MAX LOAD 150 kg. LOAD RANGE 60, 100, AND 150 kg. INITIAL LOAD RANGE 10 kg. MAX TEST HT. 6 3/4" THROAT DEPTH 5 1/4" MAX DEPTH OF SPINDLE BELOW BASE 2" BASE SIZE 7" X 18" MACHINE HEIGHT 24.5" APPROX WEIGHT 170 lbs.
|
|
|
FOR SALE: Year - 2000 Make - SPI Model - MV-14 |
---|
FOR SALE: Ad # 14500 , Year = 2000 , Make = SPI , Model = MV-14 |
|
Category: Comparators
|
Capacity: 14" w/ quadra check
|
Ad #
14500 |
Year:
| 2000
|
Make:
| SPI
|
Model:
| MV-14
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 200
|
Dimension: L x W x H | 47" x 22" x 55" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- SPI 14" optical comparator/profile projector# MV-14 w/ quadra check 200 unit with cabinet
frosted 14" screen,90deg crosshairs,readings to 5 mins of arc with vernier illumination: 3 position shutter provides profile or surface illumination or both lens: std 10x includes:optional 20x & 50x not included includes base cabinet dust coner all manuals std specs below Specs: Optical Comparators & Profile Projectors; Orientation: Horizontal; Magnification: 10x; Screen Diameter (Inch): 14; X-Axis Stage Travel Range (Inch): 8; Y-Axis Stage Travel Range (Inch): 4; Stage Length (Inch): 19 Orientation Horizontal Magnification 10x Screen Diameter (Inch) 14 X-Axis Stage Travel Range (Inch) 8 Y-Axis Stage Travel Range (Inch) 4 Stage Length (Inch) 19 Stage Width (Inch) 4-1/2 Overall Length (Inch) 48-1/2 Overall Width (Inch) 22-1/2 Light Source Long-Life Tungsten-Halogen Overall Height (Inch) 34 Lens Included (Yes/No) 10X note: machine is in like new slightly used condtion(been sitting)-almost new;sells for over 12K new
|
Electrical Description |
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - ?? Make - Thermolyne / Sybron Model - FA1938 |
---|
FOR SALE: Ad # 15826 , Year = ?? , Make = Thermolyne / Sybron , Model = FA1938 |
|
Category: Heat Treat Ovens
|
Capacity: 2200 deg F max
|
Ad #
15826 |
Year:
| ??
|
Make:
| Thermolyne / Sybron
|
Model:
| FA1938
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: | We can load
|
Weight: | 500
|
Dimension: L x W x H | 4 x 4 x 3 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Thermolyne Muffle furnace/Kiln:#FA1938
bench top type Capacity(inside dim:17.7L 9-1/2" Width x 8-1/2" Height x 13-1/2" Depth control:furnatrol 1 type 18200 automatic Temp :75-2200 deg F voltage:208/1 phase :27.7 Amps: 5800 Watts counter-weighted door -both open at same time with lever Heavy-duty firebrick insulation. Hard, abrasion resistant, designed to support heavy loads Heavy duty steel case supports the most demanding requirements Door is filled with refractory cement for long service life heating elements embedded in special refractory cement offer long service life, protection from harmful materials and mechanical shock Heating elements located on all four sides of chamber for maximum heat transfer and chamber
|
Electrical Description |
|
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
FOR SALE: Year - 1965 Make - Yale Model - 200F |
---|
FOR SALE: Ad # 13220 , Year = 1965 , Make = Yale , Model = 200F |
|
Category: Forklifts / Lift Trucks (All Types)
|
Capacity: 20,000 lbs
|
Ad #
13220 |
Year:
| 1965
|
Make:
| Yale
|
Model:
| 200F
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Rigging Fee Extra
|
Weight: | 25000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Forklift 1965 Yale 200F
S/.N # 087254 20.000lb capacity max motor :289cc Ford gasoline engine 5'forks with 10ft extensions included 2 stage mast solid tires includes 10" fork extensions notes.tuns great ready to go.,old but reliable!
|
Electrical Description |
|
|
|
FOR SALE: Year - 1965 Make - Yale Model - 200F |
---|
FOR SALE: Ad # 13220 , Year = 1965 , Make = Yale , Model = 200F |
|
Category: Forklifts / Lift Trucks (All Types)
|
Capacity: 20,000 lbs
|
Ad #
13220 |
Year:
| 1965
|
Make:
| Yale
|
Model:
| 200F
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | Rigging Fee Extra
|
Weight: | 25000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Forklift 1965 Yale 200F
S/.N # 087254 20.000lb capacity max motor :289cc Ford gasoline engine 5'forks with 10ft extensions included 2 stage mast solid tires includes 10" fork extensions notes.tuns great ready to go.,old but reliable!
|
Electrical Description |
|
|
|
FOR SALE: Year - 1992 Make - Yale Model - GLC050DENUAE083 |
---|
FOR SALE: Ad # 15103 , Year = 1992 , Make = Yale , Model = GLC050DENUAE083 |
|
Category: Forklifts / Lift Trucks (All Types)
|
Capacity: 4800 lbs
|
Ad #
15103 |
Year:
| 1992
|
Make:
| Yale
|
Model:
| GLC050DENUAE083
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 8500
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Yale #GLC050DENUAE083
S/N# N523249 propane fork truck max capacity: 4700 lbs solid tires-non marking 3ft forks 4" wide x 2" thick tilt back 5 deg side shift pre-plummed for fork shift but not used width 44" fork height: 190" or 15'8"
|
Electrical Description |
|
|
|
FOR SALE: Year - 1992 Make - Yale Model - GLC050DENUAE083 |
---|
FOR SALE: Ad # 15103 , Year = 1992 , Make = Yale , Model = GLC050DENUAE083 |
|
Category: Forklifts / Lift Trucks (All Types)
|
Capacity: 4800 lbs
|
Ad #
15103 |
Year:
| 1992
|
Make:
| Yale
|
Model:
| GLC050DENUAE083
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 8500
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Yale #GLC050DENUAE083
S/N# N523249 propane fork truck max capacity: 4700 lbs solid tires-non marking 3ft forks 4" wide x 2" thick tilt back 5 deg side shift pre-plummed for fork shift but not used width 44" fork height: 190" or 15'8"
|
Electrical Description |
|
|
|
We found 5 matching ads. Now displaying the remaining 5 ads.
FOR SALE: Year - 200? Make - raytech ind Model - AV-75 |
---|
FOR SALE: Ad # 12996 , Year = 200? , Make = raytech ind , Model = AV-75 |
|
Category: Vibratory Equipment
|
Capacity: vibratory bowl w/ media
|
Ad #
12996 |
Year:
| 200?
|
Make:
| raytech ind
|
Model:
| AV-75
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Raytech ind- vibratory bowl # AV-75
includes 2 types of media & solution Raytech quality finishing systems provide the capacity and features you need for effective, versatile productivity. Bowls are designed to run wet or dry. Use with the Flow-Thru system kit. • Finisher has a stationary base with adjustable amplitude , 6-gallon flow-thru bowl • Media capacity: ceramic: 66 lbs.; plastic: 50 lbs.; hardwood: 22 lbs.; shell: 43 lbs. Brand: Raytech Model or style no.: AV-75 Power: 110-120 volts Dimensions: 20" diameter x 9-1/2" deep bowl Capacity: 12 cups, 400 rings Country of origin: USA
|
Electrical Description |
|
|
|
FOR SALE: Year - 2008 Make - Zero Model - BNP-55-6 |
---|
FOR SALE: Ad # 12509 , Year = 2008 , Make = Zero , Model = BNP-55-6 |
|
Category: Bead & Shot Blasters
|
Capacity: 42" w x 24" deep x 26H
|
Ad #
12509 |
Year:
| 2008
|
Make:
| Zero
|
Model:
| BNP-55-6
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 1500
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Zero blast cabinet
# BNP-55-6 42" lond x 24" deep x 26" high light 2 door seperator dust collector
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - Blast it all Model - |
---|
FOR SALE: Ad # 12508 , Year = , Make = Blast it all , Model = |
|
Category: Bead & Shot Blasters
|
Capacity: 48wide x 36deep
|
Ad #
12508 |
Year:
|
|
Make:
| Blast it all
|
Model:
|
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 1800
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Blast it all shot blaster system
48" wide 36" deep 32" high door 33 x 32 light seperator/reclaimer dust filter cabinet
|
Electrical Description |
|
|
|
FOR SALE: Year - 2007 Make - ALC/ Lagrange Model - F-150DM 40004 |
---|
FOR SALE: Ad # 12513 , Year = 2007 , Make = ALC/ Lagrange , Model = F-150DM 40004 |
|
Category: Bead & Shot Blasters
|
Capacity: portable blast unit
|
Ad #
12513 |
Year:
| 2007
|
Make:
| ALC/ Lagrange
|
Model:
| F-150DM 40004
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | On showroom floor
|
Shipping Info: | We can load
|
Weight: | 500
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- ALC abrasive portable Alum oxide shot blaster system
# F-150DM 40004 / 1227-245 125 PSi HD= o.094 8 bags of sand shown included
|
Electrical Description |
|
|
|
FOR SALE: Year - 2008? Make - Mr Deburr Model - 600 |
---|
FOR SALE: Ad # 15008 , Year = 2008? , Make = Mr Deburr , Model = 600 |
|
Category: Vibratory Equipment
|
Capacity: 6.5 Cu ft w/ media
|
Ad #
15008 |
Year:
| 2008?
|
Make:
| Mr Deburr
|
Model:
| 600
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Can be powered up
|
Shipping Info: | We can load
|
Weight: | 400
|
Dimension: L x W x H | 2 x 4 x 4 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Mr Deburr # 600 vibratory Finisher
6.5 Cu ft Interior dimensions:35"lengthx18"width x18.5"depth Main Motor:3HP includes media-shown coolant pump lid flap voltage:460/3 or 220/3 wired 460/3 now std.mfg info below This six and one-half cubic foot capacity vibratory tank is one of the “Mr. Deburr” series machines and is a fast selling model within the C & M Topline Inc. inventory. The machine is quite versatile and has been in use throughout domestic and international markets since 1972. this machine will save time, money, and labor. The large inside tank dimensions of this machine more than accommodate the high quantity and mass finishing demands required by most production lines and job shops. The tank is constructed of high quality steel and assembled by certified welders. The tank has a ribbed polyurethane liner. Suspension steel spring coils with isolator plugs increase the amplitude of the tank. The 600DB Vibratory Rectangular Tank includes the following features: •Both machines have a 5" round discharge door that is held in place with a quick release clamp for easy parts separation or media changes. •Constructed of heavy gage steel for long life. •Tanks lined with high quality Uniroyal polyurethane that is oven cured. •Simple reliable design will give years of trouble free service. •Provides a more uniform surface for plating or anodizing •MADE IN THE USA Here are some additional benefits to owning one of our 6.5 cubic foot machines. Has the ability to run small or large batches. This machine replaces expensive hand deburring with inexpensive batch finishing. Reduces man hours needed to handle parts and buying costly hand abrasive. This Machine needs minimum supervision, allowing operator to multi-task. Note: little use on machine,liner is in great condition! Loaded with ceramic media,ready to go!
|
Electrical Description |
|
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|