User SearchYour search results (if any) appear below in groups of 75 for each section.
Manual Lathes
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - 93? Make - TOS-Trecin Model - SN 40-B |
---|
FOR SALE: Ad # 8203 , Year = 93? , Make = TOS-Trecin , Model = SN 40-B |
|
Category: Tool Room Lathe 8in. to 14in. swing
|
Capacity: 14" x 40" Gap Bed Engine Lathew/ 3in Spindle bore
|
Ad #
8203 |
Year:
| 93?
|
Make:
| TOS-Trecin
|
Model:
| SN 40-B
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- Swing: 14"over ways, 9" over cross slide
3" spindle bore DBC: 40" Removable Gap Bed Chuck Size: 12" 3-Jaw Spindle Power: 7 hp Quick Change Tool Post Tailstock Inch Threading Work Light Coolant System
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 80's? Make - LONGEM Model - LG 2060-D |
---|
FOR SALE: Ad # 8206 , Year = 80's? , Make = LONGEM , Model = LG 2060-D |
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: 20" x 60" Heavy Duty Engine Lathe
|
Ad #
8206 |
Year:
| 80's?
|
Make:
| LONGEM
|
Model:
| LG 2060-D
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 4500
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Swing: 20"over ways, 11 in over crosslide
3-1/4" spindle bore DBC: 60" Spindle Speeds: 28 - 1,600 rpm Spindle Bore: 3-1/8" Chuck" 12" 3-Jaw Chuck Steady Rest Follow Rest Tailstock Inch/Metric Threading Work Light
|
Comments: |
- mis. Tooling including drill chucks, centers etc are included
|
|
|
We found 5 matching ads. Now displaying the remaining 5 ads.
FOR SALE: Year - Make - Ex-cell-o Model - XLO 9 x 42 |
---|
FOR SALE: Ad # 8209 , Year = , Make = Ex-cell-o , Model = XLO 9 x 42 |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 9" x 42" XLO Knee Mill With Powered Knee
|
Ad #
8209 |
Year:
|
|
Make:
| Ex-cell-o
|
Model:
| XLO 9 x 42
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: | 3000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Table: 9" x 46"
Spindle Power: 2 hp 30 taper spindle Spindle Speeds" 120 - 3,800 rpm Variable Speed Drive Work Light
|
Electrical Description |
|
Comments: |
|
|
|
FOR SALE: Year - 1994 Make - Birmingham Model - XJ 5523 |
---|
FOR SALE: Ad # 8197 , Year = 1994 , Make = Birmingham , Model = XJ 5523 |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 9" x 49" Knee Mill
|
Ad #
8197 |
Year:
| 1994
|
Make:
| Birmingham
|
Model:
| XJ 5523
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Table: 9" x 49"
Variable Speed Spindle Speeds: 500 - 4,200 rpm Power Feed in X Spindle Power: 3 hp Oil Mister
|
Electrical Description |
|
|
|
FOR SALE: Year - 1983 Make - BRIDGEPORT Model - 9 x 49 |
---|
FOR SALE: Ad # 8211 , Year = 1983 , Make = BRIDGEPORT , Model = 9 x 49 |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 9" x 49" Bridgeport Knee Mill
|
Ad #
8211 |
Year:
| 1983
|
Make:
| BRIDGEPORT
|
Model:
| 9 x 49
|
Condition:
| Needs Work
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Table: 9" x 49"
Variable Speed Head
|
Electrical Description |
|
Comments: |
- Has both Power feed in "X" and 2-axis DRO - neither can be guaranteed to operate
|
|
|
FOR SALE: Year - Make - ExCello Model - 9 x 46 |
---|
FOR SALE: Ad # 8196 , Year = , Make = ExCello , Model = 9 x 46 |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 9" x 46" ExCello Knee Mill
|
Ad #
8196 |
Year:
|
|
Make:
| ExCello
|
Model:
| 9 x 46
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: | 2500
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Table: 9" x 46"
Spindle Power: 2 hp 30 taper spindle Spindle Speeds" 120 - 3,800 rpm Variable Speed Drive Work Light
|
Electrical Description |
|
Comments: |
- Includes vise and misc tooling
|
|
|
FOR SALE: Year - Make - SUPERMAX Model - 9 x 42 |
---|
FOR SALE: Ad # 8207 , Year = , Make = SUPERMAX , Model = 9 x 42 |
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 9" x 42" SuperMax Knee Mill
|
Ad #
8207 |
Year:
|
|
Make:
| SUPERMAX
|
Model:
| 9 x 42
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Table: 9" x 42"
Variable Speed Spindle Spindle Speeds: 60 - 4,200 rpm Spindle Power: 2 hp Power Feed in "X" Oil Mister
|
Electrical Description |
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - Make - Johansson Model - Johansson Radial Drill |
---|
FOR SALE: Ad # 8150 , Year = , Make = Johansson , Model = Johansson Radial Drill |
|
Category: Single Spindle Drill Press
|
Capacity: 40" x 20" Johansson Boxway "Y" Drill
|
Ad #
8150 |
Year:
|
|
Make:
| Johansson
|
Model:
| Johansson Radial Drill
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: | 3000
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
General Description |
- Table: 40" x 20"
Auto Up-feed (Table) 3MT spindle 26" throat max 2HP Box Ways in "Y" Axis Spindle Feed: 105-1,20 rpm Spindle Power: 1 hp Approx" 49" Throat
|
Electrical Description |
|
Comments: |
- NOTE: machine is mounted on casters making this shop portable
Some Misc. tooling included
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - Make - Delta Model - 20-V |
---|
FOR SALE: Ad # 8210 , Year = , Make = Delta , Model = 20-V |
|
Category: Vertical Band Saws
|
Capacity: 20" Vertical Band Saw with Hand Fed Table
|
Ad #
8210 |
Year:
|
|
Make:
| Delta
|
Model:
| 20-V
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: | 1800
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
General Description |
- Throat: 20"
Blade Width: 3/4" Table: Custom Hand Fed, 36" x 36"
|
Electrical Description |
|
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
FOR SALE: Year - Make - HARIG Model - Super 618 |
---|
FOR SALE: Ad # 8212 , Year = , Make = HARIG , Model = Super 618 |
|
Category: Surface Grinders
|
Capacity: Harig Super 618 Hydraulic Surface Grinder
|
Ad #
8212 |
Year:
|
|
Make:
| HARIG
|
Model:
| Super 618
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Walter Electro-Magnetic Chuck: 6" x 18
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - JET Model - JSG-6DC |
---|
FOR SALE: Ad # 8205 , Year = , Make = JET , Model = JSG-6DC |
|
Category: Belt & Disc Grinders
|
Capacity: 12" Disc, 6" Wide Belt, Belt and Disc Sander
|
Ad #
8205 |
Year:
|
|
Make:
| JET
|
Model:
| JSG-6DC
|
Condition:
| Fair
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: | 210 lbs
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Belt Dimension 6" x 48"
Disc Diameter 12" Belt Speed 2500 SFM Belt Table Tilt (Down, Up) 45° , 20° Disc Table Tilt 45° , 25°
Machine Mounted on a solid stand at work height.
|
Electrical Description |
- pre-wired 110V/single Phase
|
Comments: |
|
|
|
FOR SALE: Year - Make - Thompson Model - 624 |
---|
FOR SALE: Ad # 8204 , Year = , Make = Thompson , Model = 624 |
|
Category: Surface Grinders
|
Capacity: 6" x 18" Thompson Surface Grinder with Auto Traverse
|
Ad #
8204 |
Year:
|
|
Make:
| Thompson
|
Model:
| 624
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Table: 24" x 6" (Auto traverse)
Electro-Magnetic Chuck: 6" x 18" Spindle: 2 hp Grinding Wheel: 12" dia Integrated Diamond Dresser with fine Feed
|
Electrical Description |
|
|
|
FOR SALE: Year - Make - HARIG Model - 612 |
---|
FOR SALE: Ad # 8213 , Year = , Make = HARIG , Model = 612 |
|
Category: Surface Grinders
|
Capacity: HARIG 612 Manual Surface Grinder
|
Ad #
8213 |
Year:
|
|
Make:
| HARIG
|
Model:
| 612
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: | 1200
|
Dimension: L x W x H | 4 x4 x 5 |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Chuck: Walter Ceramax Chuck, 6" x 12"
|
Electrical Description |
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
FOR SALE: Year - Make - Black Jack Model - 12 Ton |
---|
FOR SALE: Ad # 8200 , Year = , Make = Black Jack , Model = 12 Ton |
|
Category: Hydraulic H-Frame Press
|
Capacity: 12 Ton "H" Frame Hydraulic Press
|
Ad #
8200 |
Year:
|
|
Make:
| Black Jack
|
Model:
| 12 Ton
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Capacity: 12 Ton
Width Between columns: 24" Portable Unit (on castor's) 48" from floor to cross beam
|
|
|
FOR SALE: Year - Make - Dake Model - 75 H |
---|
FOR SALE: Ad # 8198 , Year = , Make = Dake , Model = 75 H |
|
Category: Hydraulic H-Frame Press
|
Capacity: 75 Ton Manually Operated Dake "H" Frame Press
|
Ad #
8198 |
Year:
|
|
Make:
| Dake
|
Model:
| 75 H
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Capacity: 75 Ton (manually Operated)
Width Between Columns: 44" Electrically Operated Height Adjustment
|
Electrical Description |
|
|
|
We found 1 matching ad. Now displaying the final ad.
FOR SALE: Year - Make - Kaeser Model - SM-8, 6015 Air Station |
---|
FOR SALE: Ad # 8179 , Year = , Make = Kaeser , Model = SM-8, 6015 Air Station |
|
Category: Air Compressors, Rotary Screw Type
|
Capacity: Kaeser 6015 Air Station W/ dryer
|
Ad #
8179 |
Year:
|
|
Make:
| Kaeser
|
Model:
| SM-8, 6015 Air Station
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | 30" x 40" x 66" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- 7.5 hp
21cfm cfm@110 psig: 30 cfm cfm@145 psig: 25 cfm cfm@190 psig: 20 cfm
Dryer: Model PR 35SP 35 cfm@100 psig@ 100F
|
Electrical Description |
|
Comments: |
- Running hours: 23232 as of Feb 1, 2008
|
|
|
We found 24 matching ads. Now displaying the remaining 24 ads.
FOR SALE: Year - 2002 Make - toyo Model - plantar tt-150 hr2 |
---|
FOR SALE: Ad # 9033 , Year = 2002 , Make = toyo , Model = plantar tt-150 hr2 |
|
Category: Injection Molding Machines
|
Capacity: 150ton
|
Ad #
9033 |
Year:
| 2002
|
Make:
| toyo
|
Model:
| plantar tt-150 hr2
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Toyo
Plantar TT-150HR2
150 Tons
12.2 cu. In. inj. Capacity
s/n 1254006
Mfg. Date 9/2002
2 Station Rotary Table
PLCS-9s Control
Customer Price $80,000
Dealer Price $60,000
|
Electrical Description |
|
|
|
FOR SALE: Year - 1989 Make - cincinatti Model - VH250 |
---|
FOR SALE: Ad # 8935 , Year = 1989 , Make = cincinatti , Model = VH250 |
|
Category: Injection Molding Machines
|
Capacity: 21OZ
|
Ad #
8935 |
Year:
| 1989
|
Make:
| cincinatti
|
Model:
| VH250
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- 21Oz shot size
VLC control Full Hyd. clamping 103,000 hrs tie bar dim: 22.5 horiz x 21.5 vert
|
Electrical Description |
|
Comments: |
|
|
|
FOR SALE: Year - Make - demag Model - D210730NC3 |
---|
FOR SALE: Ad # 8938 , Year = , Make = demag , Model = D210730NC3 |
|
Category: Injection Molding Machines
|
Capacity: 210 ton
|
Ad #
8938 |
Year:
|
|
Make:
| demag
|
Model:
| D210730NC3
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- 210 ton
shot size: 190mm 21.5" Sq tie bar size robot interface
|
Electrical Description |
|
|
|
FOR SALE: Year - 1994 Make - Vandorn-Demag Model - 55HP-2.8F |
---|
FOR SALE: Ad # 8937 , Year = 1994 , Make = Vandorn-Demag , Model = 55HP-2.8F |
|
Category: Injection Molding Machines
|
Capacity: 55ton-2.8oz shot size
|
Ad #
8937 |
Year:
| 1994
|
Make:
| Vandorn-Demag
|
Model:
| 55HP-2.8F
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $SOLD USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
General Description |
- 55ton
2.8 oz shot size 21.6 in stroke full hydraulic 13" x 13" tie bar distance pathfinder control robot interface
|
Electrical Description |
|
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
FOR SALE: Year - 07/1996 Make - NISSEI P Model - PS 20E2A |
---|
FOR SALE: Ad # 8245 , Year = 07/1996 , Make = NISSEI P , Model = PS 20E2A |
|
Category: Injection Molding Machines
|
Capacity: 20 Ton (metric), 0,537 oz, NISSEI Plastic Injection Molding Machine
|
Ad #
8245 |
Year:
| 07/1996
|
Make:
| NISSEI P
|
Model:
| PS 20E2A
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- 2 units available !!
Tonnage: 20 Tons Platen Size: More Information to follow Max. Mold: Shot Size: 0.57 oz or 18 cu cm Tie Bar: Clamp Stroke: Screw Size: 19 mm diameter
Controller: NC 9000 G
Options:
|
Electrical Description |
|
Comments: |
- NOTE 1
Not all the ancillary equipment such as hoppers, feeders, loaders, coolers, grinders, dryers, external temperature controls etc that might be seen on the photographs are part of the selling price. These items can be purchased separately though. Please ask for details and clarification of included items
NOTE 2 At an extra charge, we can offer shipping, rigging in, setting up and training. Price quote on request.
NOTE 3.
All these machines have been at least thoroughly check out by experienced technicians and/or refurbished to various levels. These levels range from replacing worn parts, to partial strip down and rebuilt to totally stripped down and rebuilt. Can be seen running under power.
More photos on request!
|
|
|
FOR SALE: Year - 10/1996 Make - NISSEI P Model - PS 20E2A |
---|
FOR SALE: Ad # 8244 , Year = 10/1996 , Make = NISSEI P , Model = PS 20E2A |
|
Category: Injection Molding Machines
|
Capacity: 20 Ton (metric), 0,537 oz, NISSEI Plastic Injection Molding Machine
|
Ad #
8244 |
Year:
| 10/1996
|
Make:
| NISSEI P
|
Model:
| PS 20E2A
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- 2 units available
Tonnage: 20 Tons Platen Size: More Information to follow Max. Mold: Shot Size: 0.57 oz or 18 cu cm Tie Bar: Clamp Stroke: Screw Size: 19 mm diameter
Controller: NC 9000 G
Options:
|
Electrical Description |
|
Comments: |
- NOTE 1
Not all the ancillary equipment such as hoppers, feeders, loaders, coolers, grinders, dryers, external temperature controls etc that might be seen on the photographs are part of the selling price. These items can be purchased separately though. Please ask for details and clarification of included items
NOTE 2 At an extra charge, we can offer shipping, rigging in, setting up and training. Price quote on request.
NOTE 3.
All these machines have been at least thoroughly check out by experienced technicians and/or refurbished to various levels. These levels range from replacing worn parts, to partial strip down and rebuilt to totally stripped down and rebuilt. Can be seen running under power.
More photos on request!
|
|
|
FOR SALE: Year - ? Make - ALL TYPES Model - ALL SIZES |
---|
FOR SALE: Ad # 8176 , Year = ? , Make = ALL TYPES , Model = ALL SIZES |
|
Category: Plastic Granulators
|
Capacity: Cumberland, Dry Air, Rapid, Hella, UnaDyn, Nelmor, ConAir Worktex
|
Ad #
8176 |
Year:
| ?
|
Make:
| ALL TYPES
|
Model:
| ALL SIZES
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- All types, models, sizes of:
Plastic Dryers, Plastic granulators, plastic hoppers, water coolers for plastic machines, temperature controllers, Plastic Feeders Part unloaders (robotic)
Etc etc
|
Comments: |
- Please call/e-mail with your plastic production needs
|
|
|
FOR SALE: Year - ?/ Make - ALL TYPES Model - ALL SIZES |
---|
FOR SALE: Ad # 8175 , Year = ?/ , Make = ALL TYPES , Model = ALL SIZES |
|
Category: Miscellaneous Plastic Accessories & Equipment
|
Capacity: Cumberland, Dry Air, Rapid, Hella, UnaDyn, Nelmor, ConAir Worktex
|
Ad #
8175 |
Year:
| ?/
|
Make:
| ALL TYPES
|
Model:
| ALL SIZES
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: |
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- All types, models, sizes of:
Plastic Dryers, Plastic granulators, plastic hoppers, water coolers for plastic machines, temperature controllers, Plastic Feeders Part unloaders (robotic)
Etc etc
|
Comments: |
- Please call/e-mail with your plastic production needs
|
|
|
FOR SALE: Year - Make - Cincinnati Milacron Model - CMTI-60A. 4311FX |
---|
FOR SALE: Ad # 8178 , Year = , Make = Cincinnati Milacron , Model = CMTI-60A. 4311FX |
|
Category: Miscellaneous Plastic Accessories & Equipment
|
Capacity: Centralized Water Cooling System, Cincinnati Milacron, Model CMTI-60A
|
Ad #
8178 |
Year:
|
|
Make:
| Cincinnati Milacron
|
Model:
| CMTI-60A. 4311FX
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | In Storage
|
Shipping Info: | We can load
|
Weight: | 9' x 8' x 8'
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Comp. HP: 15/15/15/15 hp
Processor Pump: 20 hp Re-circulation Pump: 5 hp Water Chiller: Freon 22, 89.7 lbs Temp Range: 20 - 60 F Max Operating Pressure: 100 psi
|
Electrical Description |
|
Comments: |
- Centralized Water Cooling unit for use with multiple plastic injection molding machines
|
|
|
FOR SALE: Year - 1992 Make - Cincinnati Milacron Model - ACT 75 D |
---|
FOR SALE: Ad # 8173 , Year = 1992 , Make = Cincinnati Milacron , Model = ACT 75 D |
|
Category: Injection Molding Machines
|
Capacity: 75 Ton, Cincinnati Milacron, Model ACT 75 D, Plastic Injection Molder
|
Ad #
8173 |
Year:
| 1992
|
Make:
| Cincinnati Milacron
|
Model:
| ACT 75 D
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Tonnage: 75 Tons
Platen Size: More information coming! Max. Mold: Shot Size: 15oz Tie Bar: Clamp Stroke:
Controller: FANUC
Options:
|
Comments: |
- NOTE 1
Not all the ancillary equipment such as hoppers, feeders, loaders, coolers, grinders, dryers, external temperature controls etc that might be seen on the photographs are part of the selling price. These items can be purchased separately though. Please ask for details and clarification of included items
NOTE 2 At an extra charge, we can offer shipping, rigging in, setting up and training. Price quote on request.
NOTE 3.
All these machines have been at least thoroughly check out by experienced technicians and/or refurbished to various levels. These levels range from replacing worn parts, to partial strip down and rebuilt to totally stripped down and rebuilt. Can be seen running under power.
More photos on request!
|
|
|
FOR SALE: Year - 1989 Make - Engel Model - ES 330/65 |
---|
FOR SALE: Ad # 8174 , Year = 1989 , Make = Engel , Model = ES 330/65 |
|
Category: Injection Molding Machines
|
Capacity: 330 Ton Engel Injection Molding Machine
|
Ad #
8174 |
Year:
| 1989
|
Make:
| Engel
|
Model:
| ES 330/65
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Tonnage: 33o Tons
Platen Size: more information to follow Max. Mold: Shot Size: Tie Bar: " Clamp Stroke:
Controller: EC 88
Options:
|
Comments: |
- NOTE 1
Not all the ancillary equipment such as hoppers, feeders, loaders, coolers, grinders, dryers, external temperature controls etc that might be seen on the photographs are part of the selling price. These items can be purchased separately though. Please ask for details and clarification of included items
NOTE 2 At an extra charge, we can offer shipping, rigging in, setting up and training. Price quote on request.
NOTE 3.
All these machines have been at least thoroughly check out by experienced technicians and/or refurbished to various levels. These levels range from replacing worn parts, to partial strip down and rebuilt to totally stripped down and rebuilt. Can be seen running under power.
More photos on request!
|
|
|
FOR SALE: Year - 1989 Make - DEMAG Model - D150-730 |
---|
FOR SALE: Ad # 8167 , Year = 1989 , Make = DEMAG , Model = D150-730 |
|
Category: Injection Molding Machines
|
Capacity: 150 Ton DEMG Plastic Injection Molding Machine
|
Ad #
8167 |
Year:
| 1989
|
Make:
| DEMAG
|
Model:
| D150-730
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Tonnage: 150 Tons
Platen Size: More information to come Max. Mold: Shot Size: Tie Bar: Clamp Stroke:
Controller: NC 1II
Options:
|
Comments: |
- NOTE 1
Not all the ancillary equipment such as hoppers, feeders, loaders, coolers, grinders, dryers, external temperature controls etc that might be seen on the photographs are part of the selling price. These items can be purchased separately though. Please ask for details and clarification of included items
NOTE 2 At an extra charge, we can offer shipping, rigging in, setting up and training. Price quote on request.
NOTE 3.
All these machines have been at least thoroughly check out by experienced technicians and/or refurbished to various levels. These levels range from replacing worn parts, to partial strip down and rebuilt to totally stripped down and rebuilt. Can be seen running under power.
More photos on request!
|
|
|
FOR SALE: Year - 1988 Make - Cincinnati Milacron Model - ACT 150 C |
---|
FOR SALE: Ad # 8168 , Year = 1988 , Make = Cincinnati Milacron , Model = ACT 150 C |
|
Category: Injection Molding Machines
|
Capacity: 150 Ton Cincinnati Milacron ACT 150C Plastic Injection Molding Machine
|
Ad #
8168 |
Year:
| 1988
|
Make:
| Cincinnati Milacron
|
Model:
| ACT 150 C
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Tonnage: 150 Tons
Platen Size: More information coming! Max. Mold: Shot Size: 183 grams Tie Bar: Clamp Stroke:
Controller: FANUC
Options: A
|
Comments: |
- NOTE 1
Not all the ancillary equipment such as hoppers, feeders, loaders, coolers, grinders, dryers, external temperature controls etc that might be seen on the photographs are part of the selling price. These items can be purchased separately though. Please ask for details and clarification of included items
NOTE 2 At an extra charge, we can offer shipping, rigging in, setting up and training. Price quote on request.
NOTE 3.
All these machines have been at least thoroughly check out by experienced technicians and/or refurbished to various levels. These levels range from replacing worn parts, to partial strip down and rebuilt to totally stripped down and rebuilt. Can be seen running under power.
More photos on request!
|
|
|
FOR SALE: Year - 1990 Make - Cincinnati Milacron Model - VT 300 |
---|
FOR SALE: Ad # 8169 , Year = 1990 , Make = Cincinnati Milacron , Model = VT 300 |
|
Category: Injection Molding Machines
|
Capacity: 300 Ton, 21 oz, Cincinnati Milacron Plastic Injection Molding Machine
|
Ad #
8169 |
Year:
| 1990
|
Make:
| Cincinnati Milacron
|
Model:
| VT 300
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: | 29,800 lbs
|
Dimension: L x W x H | 282 x 68 x 96" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Tonnage: 300 Tons
Platen Size: 39.37" x 39.37" Max. Mold: 25.2/7.9 Shot Size: 21 oz Tie Bar: 25.25" x 24.61" Clamp Stroke: 22.8"
Controller: VLC
Options:
Robot Interface
|
Comments: |
- NOTE 1
Not all the ancillary equipment such as hoppers, feeders, loaders, coolers, grinders, dryers, external temperature controls etc that might be seen on the photographs are part of the selling price. These items can be purchased separately though. Please ask for details and clarification of included items
NOTE 2 At an extra charge, we can offer shipping, rigging in, setting up and training. Price quote on request.
NOTE 3.
All these machines have been at least thoroughly check out by experienced technicians and/or refurbished to various levels. These levels range from replacing worn parts, to partial strip down and rebuilt to totally stripped down and rebuilt. Can be seen running under power.
More photos on request!
|
|
|
FOR SALE: Year - 1998 Make - Sumitomo Model - Disc 30 |
---|
FOR SALE: Ad # 8171 , Year = 1998 , Make = Sumitomo , Model = Disc 30 |
|
Category: Injection Molding Machines
|
Capacity: 30 Ton Sumitomo, DISC 30 ,CD, Injection Molding Machines
|
Ad #
8171 |
Year:
| 1998
|
Make:
| Sumitomo
|
Model:
| Disc 30
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- NOTE!! THESE MACHINES ARE SPECIFICALLY BUILT TO PRODUCE CD's ALTHOUGH THEY CAN BE USED FOR OTHER SMALL MOLDING JOBS
Also TWO IDENTICAL MACHINES AVAILABLE
Tonnage: 30 Tons Platen Size: More Information to follow Max. Mold: Shot Size: Tie Bar: Clamp Stroke:
Controller: EC 88
Options: MORE INFORMATION TO FOLLOW
|
Comments: |
- NOTE 1
Not all the ancillary equipment such as hoppers, feeders, loaders, coolers, grinders, dryers, external temperature controls etc that might be seen on the photographs are part of the selling price. These items can be purchased separately though. Please ask for details and clarification of included items
NOTE 2 At an extra charge, we can offer shipping, rigging in, setting up and training. Price quote on request.
NOTE 3.
All these machines have been at least thoroughly check out by experienced technicians and/or refurbished to various levels. These levels range from replacing worn parts, to partial strip down and rebuilt to totally stripped down and rebuilt. Can be seen running under power.
More photos on request!
|
|
|
FOR SALE: Year - 1999 Make - Engel Model - ES650/150 TL |
---|
FOR SALE: Ad # 8165 , Year = 1999 , Make = Engel , Model = ES650/150 TL |
|
Category: Injection Molding Machines
|
Capacity: 150 Ton, 8.2 oz, 33" x 27" Platen Engel Plastic Injection Machine
|
Ad #
8165 |
Year:
| 1999
|
Make:
| Engel
|
Model:
| ES650/150 TL
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: | 19,650 lbs
|
Dimension: L x W x H | 221 x 73 x 90" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Tonnage: 150 Tons
Platen Size: 33.56" x 27.56" Max. Mold: 9.84 min Shot Size: 8.2 oz Tie Bar: n/a" Clamp Stroke: 23.62"
Controller: EC 100
Options: Tie Bar-less
|
Comments: |
- NOTE 1
Not all the ancillary equipment such as hoppers, feeders, loaders, coolers, grinders, dryers, external temperature controls etc that might be seen on the photographs are part of the selling price. These items can be purchased separately though. Please ask for details and clarification of included items
NOTE 2 At an extra charge, we can offer shipping, rigging in, setting up and training. Price quote on request.
NOTE 3.
All these machines have been at least thoroughly check out by experienced technicians and/or refurbished to various levels. These levels range from replacing worn parts, to partial strip down and rebuilt to totally stripped down and rebuilt. Can be seen running under power.
More photos on request!
|
|
|
FOR SALE: Year - 1993 Make - Cincinnati Milacron Model - VT440 |
---|
FOR SALE: Ad # 8164 , Year = 1993 , Make = Cincinnati Milacron , Model = VT440 |
|
Category: Injection Molding Machines
|
Capacity: 440 Ton Cincinnati Milacron VT 440 Plastic Injection Molding Machine
|
Ad #
8164 |
Year:
| 1993
|
Make:
| Cincinnati Milacron
|
Model:
| VT440
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: | 39,900 lbs
|
Dimension: L x W x H | 325" x 74" x 110" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Tonnage: 440 Tons
Platen Size: 39.1" x 39.1" Max. Mold: 9.84/27.56 Shot Size: 41 oz Tie Bar: 28.9" x 28.9" Clamp Stroke: 25.6"
Controller: VEL
Options: Single Core Single Air
|
Comments: |
- NOTE 1
Not all the ancillary equipment such as hoppers, feeders, loaders, coolers, grinders, dryers, external temperature controls etc that might be seen on the photographs are part of the selling price. These items can be purchased separately though. Please ask for details and clarification of included items
NOTE 2 At an extra charge, we can offer shipping, rigging in, setting up and training. Price quote on request.
NOTE 3.
All these machines have been at least thoroughly check out by experienced technicians and/or refurbished to various levels. These levels range from replacing worn parts, to partial strip down and rebuilt to totally stripped down and rebuilt. Can be seen running under power.
More photos on request!
|
|
|
FOR SALE: Year - Make - Engel Model - 2000/300 |
---|
FOR SALE: Ad # 8166 , Year = , Make = Engel , Model = 2000/300 |
|
Category: Injection Molding Machines
|
Capacity: 300 Ton, 39 oz, 35.7" x 35.7" Platen,Plastic Injection Molding Machine
|
Ad #
8166 |
Year:
|
|
Make:
| Engel
|
Model:
| 2000/300
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: | 30,000 lbs
|
Dimension: L x W x H | 298 x 72 x 94" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Tonnage: 300 Tons
Platen Size: 35.67" x 35.67" Max. Mold: Shot Size: 39 oz Tie Bar: 22" x 22" Clamp Stroke:
Controller: CC 90
Options:
|
Comments: |
- NOTE 1
Not all the ancillary equipment such as hoppers, feeders, loaders, coolers, grinders, dryers, external temperature controls etc that might be seen on the photographs are part of the selling price. These items can be purchased separately though. Please ask for details and clarification of included items
NOTE 2 At an extra charge, we can offer shipping, rigging in, setting up and training. Price quote on request.
NOTE 3.
All these machines have been at least thoroughly check out by experienced technicians and/or refurbished to various levels. These levels range from replacing worn parts, to partial strip down and rebuilt to totally stripped down and rebuilt. Can be seen running under power.
More photos on request!
|
|
|
FOR SALE: Year - 1989 Make - DEMAG Model - D300-1190 |
---|
FOR SALE: Ad # 8162 , Year = 1989 , Make = DEMAG , Model = D300-1190 |
|
Category: Injection Molding Machines
|
Capacity: 300 Ton, Demag D300, Plastic Injection Molding Machine
|
Ad #
8162 |
Year:
| 1989
|
Make:
| DEMAG
|
Model:
| D300-1190
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Tonnage: 300 Tons
Platen Size: More information to come! Max. Mold: Shot Size: Tie Bar: Clamp Stroke:
Controller: NCIII
Options:
|
Comments: |
- NOTE 1
Not all the ancillary equipment such as hoppers, feeders, loaders, coolers, grinders, dryers, external temperature controls etc that might be seen on the photographs are part of the selling price. These items can be purchased separately though. Please ask for details and clarification of included items
NOTE 2 At an extra charge, we can offer shipping, rigging in, setting up and training. Price quote on request.
NOTE 3.
All these machines have been at least thoroughly check out by experienced technicians and/or refurbished to various levels. These levels range from replacing worn parts, to partial strip down and rebuilt to totally stripped down and rebuilt. Can be seen running under power.
More photos on request!
|
|
|
FOR SALE: Year - 1998 Make - Engel Model - ES 200/60 TL |
---|
FOR SALE: Ad # 8158 , Year = 1998 , Make = Engel , Model = ES 200/60 TL |
|
Category: Injection Molding Machines
|
Capacity: 60 Ton, 25 x 20 Platen, Engel Plastic Molding Machine
|
Ad #
8158 |
Year:
| 1998
|
Make:
| Engel
|
Model:
| ES 200/60 TL
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 8,500 lbs
|
Dimension: L x W x H | 146" x 52" x 76" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Tonnage: 60 Tons
Platen Size: 25.59" x 19.93" Max. Mold: 7.48/" Shot Size: 3.2 oz Tie Bar: n/a Tie Barless Clamp Stroke: 13"
Controller: EC 100
|
Comments: |
- NOTE 1
Not all the ancillary equipment such as hoppers, feeders, loaders, coolers, grinders, dryers, external temperature controls etc that might be seen on the photographs are part of the selling price. These items can be purchased separately though. Please ask for details and clarification of included items
NOTE 2 At an extra charge, we can offer shipping, rigging in, setting up and training. Price quote on request.
NOTE 3.
All these machines have been at least thoroughly check out by experienced technicians and/or refurbished to various levels. These levels range from replacing worn parts, to partial strip down and rebuilt to totally stripped down and rebuilt. Can be seen running under power.
More photos on request!
|
|
|
FOR SALE: Year - 1994 Make - DEMAG Model - D400-1200 |
---|
FOR SALE: Ad # 8160 , Year = 1994 , Make = DEMAG , Model = D400-1200 |
|
Category: Injection Molding Machines
|
Capacity: 400 Ton Demag D-400 Plastic Injection Molding Machine
|
Ad #
8160 |
Year:
| 1994
|
Make:
| DEMAG
|
Model:
| D400-1200
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: | We can load
|
Weight: |
|
Dimension: L x W x H | |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Tonnage: 400 Tons ---- More Information to follow!!
Platen Size: Max. Mold: Shot Size: Tie Bar: Clamp Stroke:
Controller: NCIII
Options:
Robot Interface
|
Comments: |
- NOTE 1
Not all the ancillary equipment such as hoppers, feeders, loaders, coolers, grinders, dryers, external temperature controls etc that might be seen on the photographs are part of the selling price. These items can be purchased separately though. Please ask for details and clarification of included items
NOTE 2 At an extra charge, we can offer shipping, rigging in, setting up and training. Price quote on request.
NOTE 3.
All these machines have been at least thoroughly check out by experienced technicians and/or refurbished to various levels. These levels range from replacing worn parts, to partial strip down and rebuilt to totally stripped down and rebuilt. Can be seen running under power.
More photos on request!
|
|
|
FOR SALE: Year - 1987 Make - Cincinnati Milacron Model - H-375 |
---|
FOR SALE: Ad # 8152 , Year = 1987 , Make = Cincinnati Milacron , Model = H-375 |
|
Category: Injection Molding Machines
|
Capacity: 375 Ton, 47" x 47" Platen, Plastic Injection Molding Machine
|
Ad #
8152 |
Year:
| 1987
|
Make:
| Cincinnati Milacron
|
Model:
| H-375
|
Condition:
| Good
|
Serial #:
| On Request
|
|
Machine Status: | Still in production
|
Shipping Info: | We can load
|
Weight: | 42,000 lbs
|
Dimension: L x W x H | 288" x 74" x 111" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $Sold USD
|
|
General Description |
- Tonnage: 375 Tons
Platen Size: 47" x 47" Max. Mold: 7.5" min Shot Size: 48 ozs Tie Bar: 34.25" x 34.25" Clamp Stroke: 32"
Controller: PC III
Options: Robot Interface
|
Electrical Description |
|
Comments: |
- NOTE 1
Not all the ancillary equipment such as hoppers, feeders, loaders, coolers, grinders, dryers, external temperature controls etc that might be seen on the photographs are part of the selling price. These items can be purchased separately though. Please ask for details and clarification of included items
NOTE 2 At an extra charge, we can offer shipping, rigging in, setting up and training. Price quote on request.
NOTE 3.
All these machines have been at least thoroughly check out by experienced technicians and/or refurbished to various levels. These levels range from replacing worn parts, to partial strip down and rebuilt to totally stripped down and rebuilt. Can be seen running under power.
More photos on request!
|
|
|
FOR SALE: Year - 1995 Make - Sumitomo Model - SH 150-NIV-A |
---|
FOR SALE: Ad # 8159 , Year = 1995 , Make = Sumitomo , Model = SH 150-NIV-A |
|
Category: Injection Molding Machines
|
Capacity: 150 ton, 29 x 29 Platen, Sumitomo Plastic Injection Machine
|
Ad #
8159 |
Year:
| 1995
|
Make:
| Sumitomo
|
Model:
| SH 150-NIV-A
|
Condition:
| Excellent
|
Serial #:
| On Request
|
|
Machine Status: | Under Power
|
Shipping Info: | We can load
|
Weight: | 13,000 lbs
|
Dimension: L x W x H | 196" x 53" x 80" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- 2 units available
Tonnage: 150 Tons Platen Size: 29.53" x 29.53" Max. Mold: 19.69/7.89 Shot Size: ? Tie Bar: 20.8" x 20.8" Clamp Stroke: 16.93"
Controller: NIV
|
Comments: |
- NOTE 1
Not all the ancillary equipment such as hoppers, feeders, loaders, coolers, grinders, dryers, external temperature controls etc that might be seen on the photographs are part of the selling price. These items can be purchased separately though. Please ask for details and clarification of included items
NOTE 2 At an extra charge, we can offer shipping, rigging in, setting up and training. Price quote on request.
NOTE 3.
All these machines have been at least thoroughly check out by experienced technicians and/or refurbished to various levels. These levels range from replacing worn parts, to partial strip down and rebuilt to totally stripped down and rebuilt. Can be seen running under power.
More photos on request!
|
|
|
FOR SALE: Year - 1991 Make - Cincinnati Milacron Model - VT 300 |
---|
FOR SALE: Ad # 8155 , Year = 1991 , Make = Cincinnati Milacron , Model = VT 300 |
|
Category: Injection Molding Machines
|
Capacity: 300 Ton, 28 oz shot, Cincinnati Plastic Injection Molding Machine
|
Ad #
8155 |
Year:
| 1991
|
Make:
| Cincinnati Milacron
|
Model:
| VT 300
|
Condition:
| Very Good
|
Serial #:
| On Request
|
|
Machine Status: |
|
Shipping Info: | We can load
|
Weight: | 29,800 lbs
|
Dimension: L x W x H | 282" x 68" x 96" |
Machine Location:
|
City: |
On Request
|
State: |
North Carolina
|
Country:
|
USA
|
Price:
| $sold USD
|
|
General Description |
- Tonnage: 300 Tons
Platen Size: 36.8" x 36.1" Max. Mold: 25.2/7.9" Shot Size: 28 oz Tie Bar: 25.25" x 24.61" Clamp Stroke: 22.8"
Controller: VEL
Options: Single Core 3 Stage Air Robot Interface
|
Comments: |
- NOTE 1
Not all the ancillary equipment such as hoppers, feeders, loaders, coolers, grinders, dryers, external temperature controls etc that might be seen on the photographs are not part of the selling price. These items can be purchased separately though. Please ask for details and clarification of included items
NOTE 2 At an extra charge, we can offer shipping, rigging in, setting up and training. Price quote on request.
NOTE 3.
All these machines have been at least thoroughly check out by experienced technicians and/or refurbished to various levels. These levels range from replacing worn parts, to partial strip down and rebuilt to totally stripped down and rebuilt. Can be seen running under power.
More photos on request!
|
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|