|
User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 5 matching ads. Now displaying the remaining 5 ads.
| FOR SALE: Year - 1991 Make - OKUMA Model - LB-15 |
|---|
| FOR SALE: Ad # 9833 , Year = 1991 , Make = OKUMA , Model = LB-15 | 
|
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: 10" chuck-big bore
|
| Ad #
9833 |
| Year:
| 1991
|
| Make:
| OKUMA
|
| Model:
| LB-15
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 10,000
|
| Dimension: L x W x H | 108"X73"X66" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- BIG BORE (2.5" THRU HOLE, 10'" CHUCK)
OSP 5020LG W/CONVERSATIONAL PROGRAMMING (ON-SITE TRAINING AVAILABLE).
3,500RPM
12 TOOLS
20.47" Z TRAVEL
6.8" X TRAVEL
15.750" SWING OVER BED.
ALL STANDARD TOOL HOLDERS.
2 LIVE CENTERS.
3 GALS. CIMCOOL.
GREEN AND WHITE TOUCH UP PAINT.
ALL MANUALS.
CONTROL SOFTWARE, ETC.
|
| Electrical Description |
|
|
| Comments: |
- CREAMPUFF!!!! MACHINE HAS NOT RUN FOR 11 YEARS SINCE OWNER RETIRED. ONLY RUN PART TIME SINCE NEW (OWNER MANAGED TOOL ROOM JOB FOR MAJOR MANUFACTURER0
PROFESSIONALLY RECOMMISSIONED AND CHECKED OUT.
WAY CONDITION NEARLY PERFECT.
|
|
|
| FOR SALE: Year - 1984 Make - OKUMA Model - LB12 |
|---|
| FOR SALE: Ad # 9565 , Year = 1984 , Make = OKUMA , Model = LB12 |
|
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: 8" chuck
|
| Ad #
9565 |
| Year:
| 1984
|
| Make:
| OKUMA
|
| Model:
| LB12
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 11,000 PDS.
|
| Dimension: L x W x H | 10' X6' X 6' |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Control :OSP 500L
Number of Axes :2
Cutting Diameter :7.87"
Between centers :19.69""
Bar / Bore :1.700"
Tool Stations :8
Spindle Motor Power :7.5 kw
Spindle Speed :3500 rpm
|
| Electrical Description |
|
|
| Comments: |
- NICE MACHINE. JOB IT WAS BOUGHT FOR RAN OUT.
|
|
|
| FOR SALE: Year - 1981 Make - Ikegai Model - VT1100 NC |
|---|
| FOR SALE: Ad # 9280 , Year = 1981 , Make = Ikegai , Model = VT1100 NC |
|
|
Category: Vertical Turret Lathe (VTL)
|
Capacity: 49" table :CNC VTL
|
| Ad #
9280 |
| Year:
| 1981
|
| Make:
| Ikegai
|
| Model:
| VT1100 NC
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 34,000
|
| Dimension: L x W x H | 15' x 11.5' x 14.5' |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Fanuc 6T control
Machine has oversized 49" table.
8 station tool magazine with 10 holders as pictured (cutting tools not included).
Hard jaws with very little use.
Max swing 59".
Max turning dia. 53".
Max turning height 31.5".
Max weight of workpiece 4,400 pds.
Max torque of worktable 6,817 pds ft.
Max cutting force 5,500 pds.
2 infinitely variable table speeds, low range 4-149 RPM, high range 17-600 RPM.
Tool head (Ram Type) verticle travel 31.5", Tool head travel to right of table center 46.062", to left of table center 2".
Tool Holder Shank size 1.250" x 1.250".
Rapid Traverse rate 472 IPM.
Manuals included.
|
| Electrical Description |
|
|
| Comments: |
- Machine looks good and can be demonstrated.
|
|
|
| FOR SALE: Year - 1996 Make - LNS Model - QuickLoad |
|---|
| FOR SALE: Ad # 10151 , Year = 1996 , Make = LNS , Model = QuickLoad |
|
|
Category: CNC Lathe Part & Accessories
|
Capacity: Magazine style
|
| Ad #
10151 |
| Year:
| 1996
|
| Make:
| LNS
|
| Model:
| QuickLoad
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 1,700 pds
|
| Dimension: L x W x H | 76" x 58" x 60" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Came off of Mori Seiki SL-150.
ran 0.825 dia
pusher bar 1" dia
pushes from left to right
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1997 Make - LNS Model - QuickLoad |
|---|
| FOR SALE: Ad # 10152 , Year = 1997 , Make = LNS , Model = QuickLoad |
|
|
Category: CNC Lathe Part & Accessories
|
Capacity: Magazine style
|
| Ad #
10152 |
| Year:
| 1997
|
| Make:
| LNS
|
| Model:
| QuickLoad
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 1,700 lbs
|
| Dimension: L x W x H | 76" x 58" x 60" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
|
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 5 matching ads. Now displaying the remaining 5 ads.
| FOR SALE: Year - Make - Republic Model - 16S |
|---|
| FOR SALE: Ad # 9509 , Year = , Make = Republic , Model = 16S |
|
|
Category: Tool Room Lathe 8in. to 14in. swing
|
Capacity: 8" chuck, approximate 40" between centers
|
| Ad #
9509 |
| Year:
|
|
| Make:
| Republic
|
| Model:
| 16S
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 4,000 pds.
|
| Dimension: L x W x H | 97" x 41" x 56" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 16" swing x 40"
8" chuck, 40" between centers approximate.
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - WARNER & SWAYSEY Model - 2A |
|---|
| FOR SALE: Ad # 9506 , Year = , Make = WARNER & SWAYSEY , Model = 2A |
|
|
Category: Ram Type & Saddle Type Turret Lathes
|
Capacity: 18" CHUCK
|
| Ad #
9506 |
| Year:
|
|
| Make:
| WARNER & SWAYSEY
|
| Model:
| 2A
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 18,000
|
| Dimension: L x W x H | 148" X70" X 76" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- 4" Spindle Hole
Spindle RPM Range 16 to 1117rpm
Square Turret on Cross Slide
18" 4 Jaw Scroll Chuck? (as pictured).
All Tool Holders (as pictured)20/40 hp main motor 220/3/60
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Warner & Swasey Model - #3 |
|---|
| FOR SALE: Ad # 9197 , Year = , Make = Warner & Swasey , Model = #3 |
|
|
Category: Ram Type & Saddle Type Turret Lathes
|
Capacity: 67-1480RPM
|
| Ad #
9197 |
| Year:
|
|
| Make:
| Warner & Swasey
|
| Model:
| #3
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 4500 max
|
| Dimension: L x W x H | 30x6x5 (including barfeed) |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Barfeed, includes some collets up to 1&1/2", Operation and maint. manual.
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1972? Make - LeBlond Model - Regal |
|---|
| FOR SALE: Ad # 9191 , Year = 1972? , Make = LeBlond , Model = Regal |
|
|
Category: Tool Room Lathe 8in. to 14in. swing
|
Capacity: 14" Swing over bed, 10" over crosslide
|
| Ad #
9191 |
| Year:
| 1972?
|
| Make:
| LeBlond
|
| Model:
| Regal
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 4500?
|
| Dimension: L x W x H | 7 x 4 x 5 |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Tool room lathe, nice,14" Swing over bed, 10" over crosslide, 30" between centers.
8" 3 jaw, 12" 4 jaw,
16" faceplate,
collet chuck, 23 pcs.
of 22J collets 3/16 thru 1 & 7/16 by 1/16ths, steadyrest,
#3 MT Tailstock,
toolholders as pictured (cutting tools not included), manuals.
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - ? Make - Warner and Swasey Model - #3 w/barfeed |
|---|
| FOR SALE: Ad # 9146 , Year = ? , Make = Warner and Swasey , Model = #3 w/barfeed |
|
|
Category: Ram Type & Saddle Type Turret Lathes
|
Capacity: # 3 w/ bar feed
|
| Ad #
9146 |
| Year:
| ?
|
| Make:
| Warner and Swasey
|
| Model:
| #3 w/barfeed
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 7000
|
| Dimension: L x W x H | 18x7x4.5 |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- With Barfeeder, oversized spindle bore (approximate 2")and chuck, uses #4 collets. Also 2 and 3 jaw chucks, 2 boring attachments, taper attachment. Coolant.
Picture shows geometric theading head (not included). Bought and used for one job, performed flawlessly, 5HP.
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
We found 8 matching ads. Now displaying the remaining 8 ads.
| FOR SALE: Year - 1985 Make - Leblond Makino Model - FNC106/A30 |
|---|
| FOR SALE: Ad # 9061 , Year = 1985 , Make = Leblond Makino , Model = FNC106/A30 |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: 50 Taper, travels X41, Y23", Z 22"
|
| Ad #
9061 |
| Year:
| 1985
|
| Make:
| Leblond Makino
|
| Model:
| FNC106/A30
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 18,000?
|
| Dimension: L x W x H | 140"Lx126"Wx120H |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Fourth axis!!! 50 taper spindle,
travels: 41-X, 23"-Y, 22"-Z
Fanuc 11M. geared head, machine looks good, Full 4th axis 16" Tsudakoma Rotary Table Model # RNCM401R, Chip Conveyer, 30 tool changer, some holders included, tapping head, etc.. Operator and Programming Manual included.
|
| Electrical Description |
|
|
| Comments: |
- Tool changer hangs up intermittently after about 30 minutes of operation or drops a tool at times, owner advises trouble is caused by spindle orientation problem. Spindle sounds great, probably resolver or orientation card, could be main spindle board.
|
|
|
| FOR SALE: Year - ? Make - Bridgeport Model - CNC R2E3 |
|---|
| FOR SALE: Ad # 9841 , Year = ? , Make = Bridgeport , Model = CNC R2E3 |
|
|
Category: CNC & Retrofit Knee / Bed Mills w/o ATC
|
Capacity: 38"x15" Table
|
| Ad #
9841 |
| Year:
| ?
|
| Make:
| Bridgeport
|
| Model:
| CNC R2E3
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 3,000 pds.
|
| Dimension: L x W x H | 72" x78" x98" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Bridgeport 3 Axis CNC Vertical Mill, Overall
Working Surface of Table: 37-3/4" L-R x 14-7/8" F-
B
Table Travel – Longitudinal (X-Axis): 30", – Cross
(Y-Axis): 15"
Table Positioning Speed: 200" / Min.
Vertical Travel of Knee: 13"
Throat Distance: 16"
Spindle Speeds (Inf. Variable): 60 – 4200 RPM
Spindle Feeds: Inf. Variable
Spindle Travel (Z-Axis): 5"
Spindle Taper: No. 30 Quick Switch
Spindle Motor: 2 HP 3/60
|
| Electrical Description |
|
|
| Comments: |
- Needs comm. module for RS232.
***Vice not included***
|
|
|
| FOR SALE: Year - 1996 Make - Fadal Model - VMC 3016 |
|---|
| FOR SALE: Ad # 9505 , Year = 1996 , Make = Fadal , Model = VMC 3016 |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: 30" x16"
|
| Ad #
9505 |
| Year:
| 1996
|
| Make:
| Fadal
|
| Model:
| VMC 3016
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 8,300 pds.
|
| Dimension: L x W x H | 98" x77" x 94" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Absolute cherry, owner operated since new, one man shop, nicest machine on the market.
TABLE SIZE................................: 38" X 16"
TRAVEL (X)...........................: 30"
TRAVEL (Y)........................: 16"
TRAVEL (Z)....................: 20"
SPINDLE SPEEDS.............................: 10-75-10,000 RPM
Max tool length 15", max tool wt. 15 pds.
SPINDLE DRIVE..............................: 15 HP
SPINDLE TAPER..............................: CAT 40
Spindle nose to table 4"-24".
Random, Bi-directional tool selection.
CONTROL TYPE...............................: FADAL 88 HS
ALL MANUALS
TOOL HOLDERS,TOOLS, AND VISE PICTURED AVAILABLE SEPARATELY.
21 TOOLS
COOLANT
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 2000 Make - Haas Model - VF1 |
|---|
| FOR SALE: Ad # 9342 , Year = 2000 , Make = Haas , Model = VF1 |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: 20"x16" 40 Taper, 20 HP
|
| Ad #
9342 |
| Year:
| 2000
|
| Make:
| Haas
|
| Model:
| VF1
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 7,100 pds
|
| Dimension: L x W x H | 102"x93"x105" Max. |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Original owner, 1 shift shop.
Table size 26"x14"
3,000pds. on table max.
7,500 RPM, 20 HP max.
Max travel X,Y,Z 20"x16"x20".
Spindle nose to table 4"-24".
20 Tools
710 ipm rapid X,Y,Z
4 sec. tool to tool
Chip Auger.
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1994 Make - Haas Model - VF3 |
|---|
| FOR SALE: Ad # 9341 , Year = 1994 , Make = Haas , Model = VF3 |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: 40x20, 40 Taper
|
| Ad #
9341 |
| Year:
| 1994
|
| Make:
| Haas
|
| Model:
| VF3
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 12,300 pds
|
| Dimension: L x W x H | 122"x100"x117" max |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Original owner, 1 shift shop,
Table Size 18"x48",
Spindle nose to table 4"-29",
Travels X,Y,Z 40", 20", 25".
7500 RPM, 7.5 HP continuous, 10HP max.,
20 Tools,
5.5 sec. tool to tool,
1500 pd on table,
450 IPM rapid X,Y,Z,
wired for 4th axis.
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1988? Make - Leblond Makino Model - FNC 45 |
|---|
| FOR SALE: Ad # 10239 , Year = 1988? , Make = Leblond Makino , Model = FNC 45 |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: Travels X,Y,Z, 27.5" x 17.75" x 17.75"
|
| Ad #
10239 |
| Year:
| 1988?
|
| Make:
| Leblond Makino
|
| Model:
| FNC 45
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 13,500 pds.
|
| Dimension: L x W x H | 120" x 109" x 102" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- 7000 RPM option
7.4/10 HP
Geared head
30 Tools
Tool Change, 4 sec., 9 sec. chip to chip
BT-40
GE Fanuc OM
Table size X,Y, 35.437" x 17.687"
T Groove Width by # of grooves, .687" x 5 grooves
480 ipm rapids
Max table load, 2,200 pds.
Travels X,Y,Z, 27.5" x 17.75" x 17.75"
Spindle End to Table Top, 7.875"-25.625"
Distance betwwen Spindle Center and Column Front Face, 19.687"
|
| Electrical Description |
|
|
| Comments: |
- Machine is equipped with external 460 VAC to 230 VAC Stepdown Transformer.
Trampoil Skimmer
20 Toolholders
Interface for SMW Model #4T201 (indexer not included)
All manuals
Great sounding machine,
Was equipped with magnetic chuck (not included)on table so only light cuts made and table top virtually unmarred.
|
|
|
| FOR SALE: Year - 1989? Make - Mitsui Seiki Model - VA-45 |
|---|
| FOR SALE: Ad # 10083 , Year = 1989? , Make = Mitsui Seiki , Model = VA-45 |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: Travel X/Y/Z, 28"/17.7"/17.7"
|
| Ad #
10083 |
| Year:
| 1989?
|
| Make:
| Mitsui Seiki
|
| Model:
| VA-45
|
| Condition:
| Fair
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | Requires rigger
|
| Weight: | 15,000
|
| Dimension: L x W x H | 9' x 10' x 10' |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Fanuc 11M
Rotary Table 4th axis
new memory board
Travel X/Y/Z, 28"/17.7"/17.7"
40 Taper, 6000RPM
25 Tools (Toolholders as pictured)
Table size 1250mm x 400mm
Spindle to Table 635mm
Manual
|
| Electrical Description |
|
|
| Comments: |
- e- stop glitch only thing wrong with it..just needs a little trouble shooting on e stop circuit..
|
|
|
| FOR SALE: Year - 1985 Make - Mitsubishi Model - Diamatic MPA-V55 |
|---|
| FOR SALE: Ad # 9210 , Year = 1985 , Make = Mitsubishi , Model = Diamatic MPA-V55 |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity:
|
| Ad #
9210 |
| Year:
| 1985
|
| Make:
| Mitsubishi
|
| Model:
| Diamatic MPA-V55
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 16,000
|
| Dimension: L x W x H | 12'x12' x 10' |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Travels-X axis 1000mm, Y axis 550mm, Z axis 550mm.
M-NAP2 control, Tsudakoma RNCM-401R (not interfaced for continous contouring)with Tsudakoma controller, 50 taper with 12 holders included, all available manuals, chip conveyer screw type.
|
| Electrical Description |
|
|
| Comments: |
- Needs Mitsubishi Part #E50902 SE-CPU1 board #BN624A472H03A (repair cost $329.00) and Power Supply Part #SE-PW (repair cost $951.00). Seller has 2 machines and can swap boards to demonstrate. Also, if buyer wants, buyer can order stated board repairs from Mitsubishi and seller will install.
|
|
|
We found 10 matching ads. Now displaying the remaining 10 ads.
| FOR SALE: Year - 80's? Make - CHORI Model - 10x42 |
|---|
| FOR SALE: Ad # 9047 , Year = 80's? , Make = CHORI , Model = 10x42 |
|
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 42x10 table
|
| Ad #
9047 |
| Year:
| 80's?
|
| Make:
| CHORI
|
| Model:
| 10x42
|
| Condition:
| Fair
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | Requires rigger
|
| Weight: | 2800
|
| Dimension: L x W x H | 5x5x7 |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- X travel 25" Y trave 10.5". Machine has 5C adapter in 30 taper spindle, Am told adapter can be removed to accept V Flange type holders, 8 with machine. Photo shows vise, not included with machine. Japanese built machine.
|
| Electrical Description |
|
|
| Comments: |
|
|
|
|
| FOR SALE: Year - Make - Bridgeport Model - |
|---|
| FOR SALE: Ad # 9048 , Year = , Make = Bridgeport , Model = |
|
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 49x9 table size
|
| Ad #
9048 |
| Year:
|
|
| Make:
| Bridgeport
|
| Model:
|
|
| Condition:
| Fair
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | Requires rigger
|
| Weight: | 2800
|
| Dimension: L x W x H | 5x5x7 |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- X36",Y12.5" travel.
variable speed head..
Machine jumps out of low gear occasionally. Owner avoids by "propping handle up". Machine shows X axis lead screw handle shifting back and forth slightly when changing direction.
|
| Electrical Description |
|
|
| Comments: |
|
|
|
|
| FOR SALE: Year - 1996 Make - Atrump Model - K2V |
|---|
| FOR SALE: Ad # 9512 , Year = 1996 , Make = Atrump , Model = K2V |
|
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: single phase machine
|
| Ad #
9512 |
| Year:
| 1996
|
| Make:
| Atrump
|
| Model:
| K2V
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 3,500 pds.
|
| Dimension: L x W x H | 58" x 58" x85" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- 3 HP.
One shot lube.
49" x 9" table.
30.75"0 crosstravel.
Power feed crosstravel.
6" import vise.
Phase converter.single phase
Collets, toolbox as pictured.
Sony 2 axis Digital Readout.
|
| Electrical Description |
- 220 volt/1 phase with phase converter.
|
| Comments: |
- Home shop machine, original owner. Excellent machine.
|
|
|
|
| Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - Make - Birmingham Model - BPS1642 |
|---|
| FOR SALE: Ad # 9508 , Year = , Make = Birmingham , Model = BPS1642 |
|
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 48" Table
|
| Ad #
9508 |
| Year:
|
|
| Make:
| Birmingham
|
| Model:
| BPS1642
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 3,500 pds.
|
| Dimension: L x W x H | 64" x 58" x 78" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- 2 HP,
step pulley head
9 x 48 table
R-8 spindle
Digital Readout
Includes collets approximately as pictured
Vise pictured available separately
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1971 Make - Bridgeport Model - Series 2 |
|---|
| FOR SALE: Ad # 9507 , Year = 1971 , Make = Bridgeport , Model = Series 2 |
|
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 42" x 9
|
| Ad #
9507 |
| Year:
| 1971
|
| Make:
| Bridgeport
|
| Model:
| Series 2
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 3,500 pds.
|
| Dimension: L x W x H | 64" x58" x 78" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- 42" x 9 table,
bridgeport power cross feed. (operation questionable, can confirm).
2 HP.
Variable speed.
One shot lube
Digital Readout(operation questionable, can confirm).
Vises and Angle Plate available separately.
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Lagun Model - FTV4 |
|---|
| FOR SALE: Ad # 9263 , Year = , Make = Lagun , Model = FTV4 |
|
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 54" x11" Table
|
| Ad #
9263 |
| Year:
|
|
| Make:
| Lagun
|
| Model:
| FTV4
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: | 2800
|
| Dimension: L x W x H | 67 x 64 x 80 |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- 3 HP main motor,
variable speed head,
18" x 32" travel,
Anilam DRO,
Power Knee and Horizontal,
6" Kurt vise included,
R8 collet.
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Bridgeport Model - 2J |
|---|
| FOR SALE: Ad # 10161 , Year = , Make = Bridgeport , Model = 2J |
|
|
Category: Knee Mills (Bridgeport Type)
|
Capacity: 9" x 42" Table
|
| Ad #
10161 |
| Year:
|
|
| Make:
| Bridgeport
|
| Model:
| 2J
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | Requires rigger
|
| Weight: | 1,800 pds.
|
| Dimension: L x W x H | 61" x 54" x 6.5' |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Power X.
Chrome ways.
AcuRite DRO.
Strep Pulley.
9.75" Y Travel.
24.5 X Travel.
Hydraulic Knee, no pump, reservoir.
Includes some collets.
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - SCRIPTA Model - E66 |
|---|
| FOR SALE: Ad # 10159 , Year = , Make = SCRIPTA , Model = E66 |
|
|
Category: Engraving, Copying & Pantograph Equip.
|
Capacity:
|
| Ad #
10159 |
| Year:
|
|
| Make:
| SCRIPTA
|
| Model:
| E66
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 1,500 pds.
|
| Dimension: L x W x H | 48" x 48" x 60" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- No manuals. Check Scripta site.
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - Make - Standard Engineering Model - #1 |
|---|
| FOR SALE: Ad # 9196 , Year = , Make = Standard Engineering , Model = #1 |
|
|
Category: Horizontal Mills
|
Capacity: 20"x4" table
|
| Ad #
9196 |
| Year:
|
|
| Make:
| Standard Engineering
|
| Model:
| #1
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 900
|
| Dimension: L x W x H | 4x3x5 |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
|
|
| FOR SALE: Year - Make - Cincinnati Model - Toolmaster |
|---|
| FOR SALE: Ad # 9138 , Year = , Make = Cincinnati , Model = Toolmaster |
|
|
Category: Knee Mills (Bridgeport Type)
|
Capacity:
|
| Ad #
9138 |
| Year:
|
|
| Make:
| Cincinnati
|
| Model:
| Toolmaster
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 2000
|
| Dimension: L x W x H | 4x5x6.5 |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- step pulley head
table size: ?, table travel 20" x 10"
Spindle: QC #30
|
| Electrical Description |
|
|
| Comments: |
- Built in coolant system, uses cincinnati style collets. Clean machine. Probably can be powered up.
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - ? Make - New Britain Gridley Model - Model 61 |
|---|
| FOR SALE: Ad # 9518 , Year = ? , Make = New Britain Gridley , Model = Model 61 |
|
|
Category: Automatic Bar Machines
|
Capacity: 2&5/8" six spindle
|
| Ad #
9518 |
| Year:
| ?
|
| Make:
| New Britain Gridley
|
| Model:
| Model 61
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | Requires rigger
|
| Weight: | 20,000 pds.
|
| Dimension: L x W x H | 30' x 12' x 7' |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
|
|
| Electrical Description |
- 460/3 phase? Can confirm.
|
| Comments: |
- Was running before taken out of production for plant relocation.
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - Make - Kira Model - KRTG-540 |
|---|
| FOR SALE: Ad # 9260 , Year = , Make = Kira , Model = KRTG-540 |
|
|
Category: Single Spindle Drill Press
|
Capacity: gear head drill press
|
| Ad #
9260 |
| Year:
|
|
| Make:
| Kira
|
| Model:
| KRTG-540
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: | 1800
|
| Dimension: L x W x H | 28 x 30 x 73 |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Japanese built, 2.2Kw main motor, 6" Wilton vise, 23" x 16" work surface, machine looks great.
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Master Model - |
|---|
| FOR SALE: Ad # 9194 , Year = , Make = Master , Model = |
|
|
Category: Radial Drill Press
|
Capacity: 4 ft., 12" column, 36"x20" table,
|
| Ad #
9194 |
| Year:
|
|
| Make:
| Master
|
| Model:
|
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 5,000?
|
| Dimension: L x W x H | 7'x3'x9' |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- 12" column, 4 ft. arm, 36"x20" table.
|
| Electrical Description |
|
|
|
|
We found 9 matching ads. Now displaying the remaining 9 ads.
| FOR SALE: Year - Make - Johnson Model - |
|---|
| FOR SALE: Ad # 9510 , Year = , Make = Johnson , Model = |
|
|
Category: Horizontal Band Saws
|
Capacity: 10"?
|
| Ad #
9510 |
| Year:
|
|
| Make:
| Johnson
|
| Model:
|
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 800 pds
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Nice little saw. Good for home shop.
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1988 Make - Kasto Model - HBA 360AU |
|---|
| FOR SALE: Ad # 9310 , Year = 1988 , Make = Kasto , Model = HBA 360AU |
|
|
Category: Fully Automatic Horizontal Band Saw
|
Capacity: 14" Round Automatic
|
| Ad #
9310 |
| Year:
| 1988
|
| Make:
| Kasto
|
| Model:
| HBA 360AU
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 5,750 pds
|
| Dimension: L x W x H | 8'x9.5'x5.8' |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- German built quality, Demo no problem, 13.5" round, 1&5/8" Blade, 17.5' Blade length, roller conveyer, 5.5Kw main motor, 14-102 meter/min infinitely variable cutting speed,
Round capacity 14.15".
Square cap. 14.15"x14.15"
23.62"x9 max feed length
Bundle width 7"-13"
Height 3.14"-7"
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1995 Make - Kasto Model - HBA 660AU |
|---|
| FOR SALE: Ad # 9309 , Year = 1995 , Make = Kasto , Model = HBA 660AU |
|
|
Category: Fully Automatic Horizontal Band Saw
|
Capacity: 26" round
|
| Ad #
9309 |
| Year:
| 1995
|
| Make:
| Kasto
|
| Model:
| HBA 660AU
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 12,500
|
| Dimension: L x W x H | 8'x14'x8.25' |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- German built quality, Demo no problem, PC equipped, 26" round, 2&5/8" Blade, 28.16' Blade length, roller conveyer, 7.5Kw main motor, 14-90 meter/min infinitely variable cutting speed,
Round capacity 26", Feed length 19.68"x9 max.
Square cap. 19.5"x19.5"
82.5" max feed length
Table (LxW)98.42"x67.71"
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1988 Make - Kasto Model - SSB VA |
|---|
| FOR SALE: Ad # 9311 , Year = 1988 , Make = Kasto , Model = SSB VA |
|
|
Category: Vertical Band Saws
|
Capacity: 10" Round NC machine
|
| Ad #
9311 |
| Year:
| 1988
|
| Make:
| Kasto
|
| Model:
| SSB VA
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 4,900 pds.
|
| Dimension: L x W x H | 7'x6.5'x6.7' |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- German built quality, Demo no problem, NC machine, 10" round, 1.250" Blade, 13.5' Blade length, roller conveyer, 4Kw main motor, 15-125 meter/min infinitely variable cutting speed,
Round capacity 10".
Square cap. 10"x10"
23.62"x9 max feed length
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 2000 Make - Kasto Model - A5 |
|---|
| FOR SALE: Ad # 9313 , Year = 2000 , Make = Kasto , Model = A5 |
|
|
Category: Fully Automatic Horizontal Band Saw
|
Capacity: 21" round CNC
|
| Ad #
9313 |
| Year:
| 2000
|
| Make:
| Kasto
|
| Model:
| A5
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 12,100 pds.
|
| Dimension: L x W x H | 7.5'x17'x8' |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- German built, CNC Conversational Control, Bundle option,
Demo no problem.
Cutting range round 20.8"
Cutting range square H x W 20.8" x 20.8"
Cutting range flat H x W 20.8" x 24.8"
Cutting range bundle H x W 20.8" x 24.8"
Clamping range 0 – 24.8" mm
Automatic material feed length, single stroke 23.62"
Automatic material feed length, multiple stroke 32.8'
Material support height 27.55" mm
Power of saw motor 5.5 kW
Cutting speed infinitely variable with 50 or 60 Hz 12 – 120 m/min
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 2003? Make - ENCO Model - 1712017 |
|---|
| FOR SALE: Ad # 9296 , Year = 2003? , Make = ENCO , Model = 1712017 |
|
|
Category: Vertical Band Saws
|
Capacity: 1 HP, 17" Throat, 10" high
|
| Ad #
9296 |
| Year:
| 2003?
|
| Make:
| ENCO
|
| Model:
| 1712017
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: | 1,146 pds.
|
| Dimension: L x W x H | 22"x42"x75" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Saw light duty in custom shop,
17&5/16" throat,
10&1/16" max. work ht,
32.5"x19.5" table,
15 degree tilt 4 ways,
36&13/16" table ht.,
85-375 fpm infinitely variable, 18" wheel dia.,
blade 141&1/8" long by 5/8" max. wide,
1 HP drive motor,
2.4KVA Butt/Blade welder capacity 3-16mm,
On board grinder.
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - DoAll Model - ML |
|---|
| FOR SALE: Ad # 9258 , Year = , Make = DoAll , Model = ML |
|
|
Category: Vertical Band Saws
|
Capacity:
|
| Ad #
9258 |
| Year:
|
|
| Make:
| DoAll
|
| Model:
| ML
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: | 1100
|
| Dimension: L x W x H | 34x45x74 |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Throat depth 16", 2' x2' table, 1/2" blade max, separate blade welder, cabinet with spare blades, guides etc.
|
| Electrical Description |
|
|
| Comments: |
- Can be powered up and inspected.
|
|
|
| FOR SALE: Year - 1997?? Make - DoALL Model - C-916 |
|---|
| FOR SALE: Ad # 10160 , Year = 1997?? , Make = DoALL , Model = C-916 |
|
|
Category: Horizontal Band Saws
|
Capacity: 10-3/4" rounda;9 x 16 retangle capacity
|
| Ad #
10160 |
| Year:
| 1997??
|
| Make:
| DoALL
|
| Model:
| C-916
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 1,500
|
| Dimension: L x W x H | 7.5' x 28" x 4.5' |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- CAPACITY: 9" X 16" FLATS / 10-3/4" ROUNDS
BAND WHEELS: 14-1/2" DIAMETER
BLADE SIZE: 159" L X 1" W
WORK HEIGHT: 26"
BLADE SPEEDS APPROX: 105 - 275 FPM
O.A.D.: 86" L-R X 26" F-B X 53" H
APPROX WEIGHT: 1,500 LBS
EQUIPPED WITH:
HYDRAULIC FEED CONTROL & HEAD
RELEASE VALVE
5-1/2" HIGH VISE WITH HAND LEVER FOR CLAMPING
RECIRCULATING COOLANT PUMP & CHIP PAN
SAW BLADE ADJUSTMENT GUIDE
PUSH BUTTONS FOR START - STOP
SELECTOR SWITCH FOR COOLANT - ON - OFF
V/S DRIVE ADJUSTMENT VIA HANDWHEEL
2 HP 1800 RPM 230/460/3/60 MOTOR, wired 460/3
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 2007 Make - Scotchman Model - VS-275HT |
|---|
| FOR SALE: Ad # 9207 , Year = 2007 , Make = Scotchman , Model = VS-275HT |
|
|
Category: Cold Saws & Power Hack Saws
|
Capacity: 10-3/4inch blade- ferrous cutting cold saw
|
| Ad #
9207 |
| Year:
| 2007
|
| Make:
| Scotchman
|
| Model:
| VS-275HT
|
| Condition:
| Demo Machine
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 600
|
| Dimension: L x W x H | 3x4x5 |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Standard Features
variable speed option 30-150 RPM
Manual Double Self-Centering Vise Assures Burr-Free Cuts
Operator Controlled Trigger Switch
Miter Capabilities 45 degrees Left and 45 degrees Right
Miter Locking Device: quick, accurate setting-stops at 45 Degrees Left, Straight 90 Degrees, and 45 Degrees Right
Capable of Slotting
Hardened and Ground Worm and Wheel Gear Box
Worm Wheel of Top Quality Bronze
7 Gallon Coolant Tank with Pump
30" Material Length Stop
One 10" Diameter (250 mm) HSS Blade
One Blade Wrench
One Gallon Concentrated Coolant
460 /3 -wired 460/3 Phase Electrics
Made in USA
Capacities & Specifications
Cutting Speeds Must Specify when Ordering
30 rpm - 120 rpm Motor rate:
2.0 hp
60 rpm / 120 rpm Motor rate:
1.5 hp
TUBING cutting capacity
Round & Square & Rectangle 90 Deg
3-3/8"
3" x 3"
3" x 2-3/8" 45 Deg
2"
2" x 2"
3" x 2"
SOLID & Round & Square 90 Deg
1-1/2"
1-1/2" x 1-1/2" 45 Deg
1"
1" x 1"
Maximum Diameter Blade 10-3/4" 275 mm
Arbor Bore 1-1/4" 32 mm
Pin Spacing 2/8/45
Width 21-7/8"
Depth 43-1/2"
Height not including handle 53-1/4"
Height from floor to vise 36-1/8"
Shipping Weight 600 lbs.
|
| Electrical Description |
|
|
| Comments: |
- Very low hrs almost new--
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 10 matching ads. Now displaying the remaining 10 ads.
| FOR SALE: Year - Make - Timesaver Model - 325-M1 |
|---|
| FOR SALE: Ad # 9326 , Year = , Make = Timesaver , Model = 325-M1 |
|
|
Category: Belt & Disc Grinders
|
Capacity:
|
| Ad #
9326 |
| Year:
|
|
| Make:
| Timesaver
|
| Model:
| 325-M1
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 5,000 pds.
|
| Dimension: L x W x H | 8'x8'x6.5' |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
|
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1988? Make - Hammond Model - OD-9-DW |
|---|
| FOR SALE: Ad # 9324 , Year = 1988? , Make = Hammond , Model = OD-9-DW |
|
|
Category: Belt & Disc Grinders
|
Capacity: 9" Cylindrical Polisher
|
| Ad #
9324 |
| Year:
| 1988?
|
| Make:
| Hammond
|
| Model:
| OD-9-DW
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 2,500
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Includes 18-20' roller conveyer.
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Bader Model - Centerless |
|---|
| FOR SALE: Ad # 9327 , Year = , Make = Bader , Model = Centerless |
|
|
Category: Centerless Grinders
|
Capacity: Bader Centerless Grinder
|
| Ad #
9327 |
| Year:
|
|
| Make:
| Bader
|
| Model:
| Centerless
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 1,000 pds.
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Includes 18'-20' roller conveyer
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Oakley Model - Stroke Sander G 120-8 |
|---|
| FOR SALE: Ad # 9321 , Year = , Make = Oakley , Model = Stroke Sander G 120-8 |
|
|
Category: Belt & Disc Grinders
|
Capacity:
|
| Ad #
9321 |
| Year:
|
|
| Make:
| Oakley
|
| Model:
| Stroke Sander G 120-8
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: | 1000 pds
|
| Dimension: L x W x H | 6x4x6 |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- New Motor, Hydraulic Lift Table
|
| Electrical Description |
|
|
| Comments: |
|
|
|
|
| FOR SALE: Year - Make - Mitsui Hi Tech Model - MSG-200H |
|---|
| FOR SALE: Ad # 9261 , Year = , Make = Mitsui Hi Tech , Model = MSG-200H |
|
|
Category: Surface Grinders
|
Capacity: 6" x 12" manual
|
| Ad #
9261 |
| Year:
|
|
| Make:
| Mitsui Hi Tech
|
| Model:
| MSG-200H
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: | 1800
|
| Dimension: L x W x H | 45 x 38 x 73 |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Manual traverse, Japanese built, 6' x 12" Walker Ceramax permanent magnet chuck.
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 2007 Make - Supertec Model - 1632CII |
|---|
| FOR SALE: Ad # 10143 , Year = 2007 , Make = Supertec , Model = 1632CII |
|
|
Category: 3 Axis Fully Automatic Surface Grinder
|
Capacity: 16 x 32 table-full 3 axis downfeed
|
| Ad #
10143 |
| Year:
| 2007
|
| Make:
| Supertec
|
| Model:
| 1632CII
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 8,700 lbs
|
| Dimension: L x W x H | 106" x 90" x 91" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- 2007 Supertec 1632CII
16 x 32 table-full 3 axis w/downfeed
16 x 32 table
Sony DRO (X and Y).
Magnetic and Paper coolant filtration
Kenetsu Magnetic Chuck Model #KET4080K.
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - Make - Mattison Model - 36 |
|---|
| FOR SALE: Ad # 10146 , Year = , Make = Mattison , Model = 36 |
|
|
Category: Vertical Spindle - Blanchard Type
|
Capacity: 48"table dia
|
| Ad #
10146 |
| Year:
|
|
| Make:
| Mattison
|
| Model:
| 36
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | Requires rigger
|
| Weight: | 22,000?
|
| Dimension: L x W x H | 15' x 12' x 10' |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- 48" dia chuck
.250" magnet thickness remaining
Segmented Wheel, extra rocks.
16" between rocks and table
Incudes coolant tank and pump
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1970? Make - Brown and Sharpe Model - #13 |
|---|
| FOR SALE: Ad # 10080 , Year = 1970? , Make = Brown and Sharpe , Model = #13 |
|
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: 8 x 24
|
| Ad #
10080 |
| Year:
| 1970?
|
| Make:
| Brown and Sharpe
|
| Model:
| #13
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 2,000
|
| Dimension: L x W x H | 66" x 54" x 63" High |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Grinding Capacity: 8" x 24"
Longitudinal Table Travel: 22"
Cross Feed Travel: 10-1/4"
Head Vertical Travel: 8-3/8"
Grinding Wheel Size: 7" Dia. x 1/2" Wide
Grinding Wheel Speeds (3) 2730/3600/5150 RPM
Work Head Speeds (4): 128/195/325/540 RPM
Power Table Feed Rates (6): 7.7 - 100 IPM
1 HP Spindle Motor
1/4 HP Table Drive Motor
1/6 HP Work Head Motor
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Hybco Model - 1100 |
|---|
| FOR SALE: Ad # 10081 , Year = , Make = Hybco , Model = 1100 |
|
|
Category: Tool & Cutter Grinders
|
Capacity: 1-1/16 shank max
|
| Ad #
10081 |
| Year:
|
|
| Make:
| Hybco
|
| Model:
| 1100
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 2000
|
| Dimension: L x W x H | 32" L-R x 24" F-B x 53" H |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Collets as pictured approximate .141"-1.108"
Uses Collet Type 5C
1/4 HP Main Motor (verify)
1-1/16 max shank
extra belts
cams
wheels
radius dresser
manual
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 85? Make - Star/ELB Model - 11 |
|---|
| FOR SALE: Ad # 9192 , Year = 85? , Make = Star/ELB , Model = 11 |
|
|
Category: 3 Axis Fully Automatic Surface Grinder
|
Capacity: 10x20 w/12" wheel-auto downfeed
|
| Ad #
9192 |
| Year:
| 85?
|
| Make:
| Star/ELB
|
| Model:
| 11
|
| Condition:
| Fair
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 6500?
|
| Dimension: L x W x H | 12x6x7 |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Automatic and manual (handwheel) verticle infeed,
verticle rapid feed,
magnet 10x20, 12" wheel, manual.
coolant w/ mag seperator
machine ran fine when taken out of service
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1952 Make - Nassovin Model - NT14 |
|---|
| FOR SALE: Ad # 9195 , Year = 1952 , Make = Nassovin , Model = NT14 |
|
|
Category: Broaching Machines, Vertical & Horizontal
|
Capacity: Filing machine, 16" table diameter.
|
| Ad #
9195 |
| Year:
| 1952
|
| Make:
| Nassovin
|
| Model:
| NT14
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 750
|
| Dimension: L x W x H | 3x3x5 |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
|
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1999 Make - Extrude Hone Model - Vector 8/6 |
|---|
| FOR SALE: Ad # 9243 , Year = 1999 , Make = Extrude Hone , Model = Vector 8/6 |
|
|
Category: Abrasive Flow Machines
|
Capacity: max opening 22.75 x 2.75 min
|
| Ad #
9243 |
| Year:
| 1999
|
| Make:
| Extrude Hone
|
| Model:
| Vector 8/6
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 3500
|
| Dimension: L x W x H | 40"x40"x96.25"(closed) |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Media Flow Upgrade in 2003. Excellent condition. Seller encourages buyer to come see demonstration.
Worktable Height 46.5".
Column Spacing 28".
Max opening 22.75"
Min opening 2.75"
Power unit 37.5" high x32" wide x 34.5" deep, 350 pds.
Media Tube dia. 8".
Media Tube displacement 628.3".
Media Extrusion Pressure 197-844psi.
Media delivery rate 0-2,53 cu in/min.
Hydraulic Clamping Force 22.0-29.4 tons.
All manuals.
|
| Electrical Description |
|
|
| Comments: |
- Seller glad to demo machine for buyer.
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - Make - Gould & Eberhardt Model - |
|---|
| FOR SALE: Ad # 9519 , Year = , Make = Gould & Eberhardt , Model = |
|
|
Category: Gear Hobbers
|
Capacity:
|
| Ad #
9519 |
| Year:
|
|
| Make:
| Gould & Eberhardt
|
| Model:
|
|
| Condition:
| Fair
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | Requires rigger
|
| Weight: | 4,500 pds.
|
| Dimension: L x W x H | 8' x 8' x 7' |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 15" max cutter height.
27" between quill face and faceplate.
13" wide main rail.
5" wide tailstock rail.
|
| Electrical Description |
|
|
| Comments: |
- One motor removed from machine and on skid separate from machine.
|
|
|
| FOR SALE: Year - 1950 Make - Fellows Model - #7 |
|---|
| FOR SALE: Ad # 9262 , Year = 1950 , Make = Fellows , Model = #7 |
|
|
Category: Gear Shapers
|
Capacity: #7
|
| Ad #
9262 |
| Year:
| 1950
|
| Make:
| Fellows
|
| Model:
| #7
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 2800
|
| Dimension: L x W x H | 41 x51 x78 |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Gears as pictured, miscellaneous cutters included,
Quiet as a sewing machine and smooth as silk.
Will cut a 7" gear using a 3" cutter. Under power, must see.
|
| Electrical Description |
|
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - 1997 Make - LNS Model - QuickLoad |
|---|
| FOR SALE: Ad # 10149 , Year = 1997 , Make = LNS , Model = QuickLoad |
|
|
Category: Miscellaneous / Other
|
Capacity: Barfeeder
|
| Ad #
10149 |
| Year:
| 1997
|
| Make:
| LNS
|
| Model:
| QuickLoad
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 1,800 pds
|
| Dimension: L x W x H | 76" x 58" x 60" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
|
|
| FOR SALE: Year - 1996 Make - LNS Model - QuickLoad |
|---|
| FOR SALE: Ad # 10148 , Year = 1996 , Make = LNS , Model = QuickLoad |
|
|
Category: Miscellaneous / Other
|
Capacity: Barfeeder
|
| Ad #
10148 |
| Year:
| 1996
|
| Make:
| LNS
|
| Model:
| QuickLoad
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 1,800 pds.
|
| Dimension: L x W x H | 76" x58" x 60" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Excellent condition.
Came off of Mori SeikiSL150.
|
| Electrical Description |
|
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 80's? Make - Wysong Model - 1025 |
|---|
| FOR SALE: Ad # 9696 , Year = 80's? , Make = Wysong , Model = 1025 |
|
|
Category: Power Squaring Shear (Mechanical)
|
Capacity: 10 foot x 1/4"
|
| Ad #
9696 |
| Year:
| 80's?
|
| Make:
| Wysong
|
| Model:
| 1025
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | Requires rigger
|
| Weight: | 20,000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- 10ft x 1/4" cap
Extra long squaring arm (88").
36" power back gage with display.
Stroke counter.
Lube system.
Work light
|
| Electrical Description |
|
|
| Comments: |
- Squaring arm needs minor repair (see picture).
|
|
|
|
| Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - Make - Hendley&Whittemor Model - |
|---|
| FOR SALE: Ad # 10158 , Year = , Make = Hendley&Whittemor , Model = |
|
|
Category: Initial Pinch & Pyramid Type Plate Bending Rolls
|
Capacity: 1/4" x 6' Initial Pinch
|
| Ad #
10158 |
| Year:
|
|
| Make:
| Hendley&Whittemor
|
| Model:
|
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 10,000
|
| Dimension: L x W x H | 15' x 4' x 5' |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- 1/4"
6ft capacity
Runs good.
|
| Electrical Description |
|
|
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| FOR SALE: Year - Make - WA Whitney Model - 636 CNC |
|---|
| FOR SALE: Ad # 9845 , Year = , Make = WA Whitney , Model = 636 CNC |
|
|
Category: Single Station Punches-CNC
|
Capacity:
|
| Ad #
9845 |
| Year:
|
|
| Make:
| WA Whitney
|
| Model:
| 636 CNC
|
| Condition:
| Needs Work
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | Requires rigger
|
| Weight: | 20,000 pds.
|
| Dimension: L x W x H | 128" x 94" x 69" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Needs control update.
Bunch of Dies included
great parts machine or fixer upper
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - ? Make - WA Whiney Model - 647C Panelmaster |
|---|
| FOR SALE: Ad # 9843 , Year = ? , Make = WA Whiney , Model = 647C Panelmaster |
|
|
Category: Single Station Punches-CNC
|
Capacity: Punch/Plasma
|
| Ad #
9843 |
| Year:
| ?
|
| Make:
| WA Whiney
|
| Model:
| 647C Panelmaster
|
| Condition:
| Needs Work
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | Requires rigger
|
| Weight: | 30,000 pds.
|
| Dimension: L x W x H | 144" x161" x 84" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- All available manuals.
Tool Cabinet,
CNC Control, Hydraulic System, Punches
& Dies, Tooling.
great parts machine or fixer upper
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 1983? Make - W. A Whitney Model - 647C Panel Master |
|---|
| FOR SALE: Ad # 9517 , Year = 1983? , Make = W. A Whitney , Model = 647C Panel Master |
|
|
Category: Single Station Punches-CNC
|
Capacity: 40 Ton
|
| Ad #
9517 |
| Year:
| 1983?
|
| Make:
| W. A Whitney
|
| Model:
| 647C Panel Master
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 18,000 pds.
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- CAPACITY: 40 TON
***Includes Hypertherm Max 200 Dual Gas Plasma Cutting System (specs and pics of which appear at our ad #9516).***
PUNCH SPECS.
AUTOMATION INTELLIGENCE PRODUCER PLUS CONTROL.
60" X TRAVEL, 48" Y TRAVEL.
MAXIMUM MATERIAL THICKNESS: 1/2"
THROAT DEPTH: 50"
PLASMA CAPACITY (MILD STEEL): 1" recommended, 2" maximum.
TABLE HEIGHT: 41"
|
| Electrical Description |
|
|
| Comments: |
- ***VIEW PLASMA SPECS. AT AD #9516.***
"Tons of tooling" included some of which as pictured.
All available manuals.
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - ? Make - Pullmax Model - P9 |
|---|
| FOR SALE: Ad # 9842 , Year = ? , Make = Pullmax , Model = P9 |
|
|
Category: Notching / Nibbler Machines
|
Capacity: 5/16" cap
|
| Ad #
9842 |
| Year:
| ?
|
| Make:
| Pullmax
|
| Model:
| P9
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: | 4,000?
|
| Dimension: L x W x H | 41" x87" x75" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Pullmax Nibbler P-9
circle shear
1" sq shank tooling
46" throat
Edge Cutting 11/32
Capacity: 5/16
Slot Cutting: 3/16
Beading: 3/16
Joggling: 3/16
Louvring: 1/8
Doming: 1/4
Flanging: 3"
Punching: 3"
Nibbling: 6"
Throat Depth: 48 3/8
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Hufford Model - Swingarm |
|---|
| FOR SALE: Ad # 9234 , Year = , Make = Hufford , Model = Swingarm |
|
|
Category: Shrinker/Stretchers, English Wheels, Power Hammers
|
Capacity: Hufford 59 ton w/bulldozer
|
| Ad #
9234 |
| Year:
|
|
| Make:
| Hufford
|
| Model:
| Swingarm
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 33,000 estimated
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 1 set of 8” Gripper Jaws
Max. Distance Between Jaws: 237”
Max. Die Length for 180 degree Bend at Full Tonnage: 72”
Table Dimensions: 50” x 84”
Table Contains 76 Uniformly Spaced Tapped Holes and Keyways
Each Arm Movement is Independently Actuated
Tensions Cylinder Swivel: +/- 25 Degrees
Oil Reservoir: 180 Gallons
Electrical Motors: 1 – 25 hp, 1 – 40 hp, 1 – 20 hp, 2 – 5 hp (Carriage Movement)
Machine Speeds:
•Tension Cylinder Extend: 35 sec.
•Tension Cylinder Retract: 26 sec.
•Arms Move Back (107 Degrees): 29 sec.
•Arms Move Forward (107 Degrees): 10 sec.
Overall Dimensions:
•Width: 388”
•Depth (Arm Forward): 267”
•Height: 76”
|
| Electrical Description |
|
|
| Comments: |
- Machine is automatic with limit switch stops. CNC retrofit available. Tooling design available.
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - Make - Hufford Model - Swing Arm |
|---|
| FOR SALE: Ad # 9230 , Year = , Make = Hufford , Model = Swing Arm |
|
|
Category: Multi-Slides
|
Capacity: Hufford 59 Ton w/bulldozer
|
| Ad #
9230 |
| Year:
|
|
| Make:
| Hufford
|
| Model:
| Swing Arm
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 35,000 estimated
|
| Dimension: L x W x H | 388"x267"x76" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- This link shows the process.
http://www.cyrilbath.com/extrusion_process.html
1 set of 8” Gripper Jaws
Max. Distance Between Jaws: 237”
Max. Die Length for 180 degree Bend at Full Tonnage: 72”
Table Dimensions: 50” x 84”
Table Contains 76 Uniformly Spaced Tapped Holes and Keyways
Each Arm Movement is Independently Actuated
Tensions Cylinder Swivel: +/- 25 Degrees
Oil Reservoir: 180 Gallons
Electrical Motors: 1 – 25 hp, 1 – 40 hp, 1 – 20 hp, 2 – 5 hp (Carriage Movement)
Machine Speeds:
•Tension Cylinder Extend: 35 sec.
•Tension Cylinder Retract: 26 sec.
•Arms Move Back (107 Degrees): 29 sec.
•Arms Move Forward (107 Degrees): 10 sec.
Overall Dimensions:
•Width: 388”
•Depth (Arm Forward): 267”
•Height: 76”
|
| Electrical Description |
|
|
| Comments: |
- Machine is automatic with Limit Switch stops. Tooling design for additional fee. CNC or PLC conversion available.
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 2003 Make - Miller Dynasty 300 Series Model - DX |
|---|
| FOR SALE: Ad # 9293 , Year = 2003 , Make = Miller Dynasty 300 Series , Model = DX |
|
|
Category: Mig & Tig Arc Welders
|
Capacity: Miller Dynasty 300 Series TIG
|
| Ad #
9293 |
| Year:
| 2003
|
| Make:
| Miller Dynasty 300 Series
|
| Model:
| DX
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: | 300 pds.
|
| Dimension: L x W x H | 3'x3'x4' |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Includes Deluxe Carrying Cart and Cylinder Rack (pictured tank and welding helmet not included), Diamondback torch, Coolmate 3 coolant system and footpedal. Machine saw light use in custom shop. All manuals. Will email literature upon request.
|
| Electrical Description |
|
|
|
|
We found 6 matching ads. Now displaying the remaining 6 ads.
| FOR SALE: Year - 1955? Make - Minster Model - 80-4-72 |
|---|
| FOR SALE: Ad # 9844 , Year = 1955? , Make = Minster , Model = 80-4-72 |
|
|
Category: Gap Frame Presses
|
Capacity: 60 Ton
|
| Ad #
9844 |
| Year:
| 1955?
|
| Make:
| Minster
|
| Model:
| 80-4-72
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 20,000 lbs
|
| Dimension: L x W x H | 100" x 55" x 126" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Minster 80 ton gap frame Press
Large bed : 24" x 72"-verify ?
Slide Stroke 4".
Side Adj. 6".
air counter balance
air clutch ???
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - Make - Dake Model - Model 3 |
|---|
| FOR SALE: Ad # 9264 , Year = , Make = Dake , Model = Model 3 |
|
|
Category: Manual Arbor Press
|
Capacity: 12 ton
|
| Ad #
9264 |
| Year:
|
|
| Make:
| Dake
|
| Model:
| Model 3
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | 22 x 26 x 41 |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Diameter of Work: 20"
Capacity Over Table: 19"
Capacity Over Plate: 1 7-1/4"
Size of Ram: 2" x 2" x 24"
Leverage Ratio: 112 : 1
Tonnage Pressure (Approx.): 12
Overall Dimensions (Approx.): 22x26x41" H
Weight (Est.): 450 Lbs.
Good tight machine, 2" square spline shaft.
|
|
|
| FOR SALE: Year - Make - Dake 50 Ton Model - 7002 |
|---|
| FOR SALE: Ad # 9259 , Year = , Make = Dake 50 Ton , Model = 7002 |
|
|
Category: Hydraulic H-Frame Press
|
Capacity: 50 Ton
|
| Ad #
9259 |
| Year:
|
|
| Make:
| Dake 50 Ton
|
| Model:
| 7002
|
| Condition:
| Needs Work
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 1800
|
| Dimension: L x W x H | 43x60x88 |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Manual Hydraulic, American made, 43" x 60" work table welded to machine as pictured. Pressure gage. CYLINDER LEAKS.
|
|
|
| FOR SALE: Year - Make - Denison Model - Multipress T120M |
|---|
| FOR SALE: Ad # 10145 , Year = , Make = Denison , Model = Multipress T120M |
|
|
Category: Hydraulic C-Frame Press
|
Capacity: 12 Ton
|
| Ad #
10145 |
| Year:
|
|
| Make:
| Denison
|
| Model:
| Multipress T120M
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 4,000 PDS.
|
| Dimension: L x W x H | 48" x 54" x 80" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 12 ton
20 " dia table
Up to 6 index positions automatic for continuous
run.
4" cylinder bore
12" stroke
12 ton cap.
10hp motor
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Beckwood Model - 752020 |
|---|
| FOR SALE: Ad # 10144 , Year = , Make = Beckwood , Model = 752020 |
|
|
Category: Hydraulic 4 Post Press
|
Capacity: 75 Ton
|
| Ad #
10144 |
| Year:
|
|
| Make:
| Beckwood
|
| Model:
| 752020
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 10,000
|
| Dimension: L x W x H | 6' x 6' x13' |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 75 ton Beckwood #752020
Allen Bradley PanelView 550 Controller
24" daylight
20" x 20" Table, 3/4" T-slots
Light Curtain equipped
Rigging loading fee:1500.00 loading drain oil into barrel,tilt press on side and block up on buyers truck
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 2007 Make - Press Master Model - HFP-100T |
|---|
| FOR SALE: Ad # 9209 , Year = 2007 , Make = Press Master , Model = HFP-100T |
|
|
Category: Hydraulic H-Frame Press
|
Capacity: 100 Ton H-frame Press
|
| Ad #
9209 |
| Year:
| 2007
|
| Make:
| Press Master
|
| Model:
| HFP-100T
|
| Condition:
| Demo Machine
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 2,400 pds.
|
| Dimension: L x W x H | 58"x48"x84" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- H-frame Press
MODEL: 100T-E/H – DELUXE
New, never used
RATED CAPACITY, TONNAGE........................... 100
STROKE............................................ 12"
BORE.............................................. 8"
RAM SPEED PRESS .................................. 20 IPM
RETURN ..................... 26 IPM
DISTANCE BETWEEN POSTS (RIGHT TO LEFT)............ 42"
DISTANCE BETWEEN POSTS (FRONT TO BACK)............ 13"
MAXIMUM DISTANCE FROM BED TO RAM ................. 30"
OVERALL HEIGHT ................................... 75"
OVERALL WIDTH .................................... 54"
OVERALL DEPTH .................................... 30"
WEIGHT ........................................... 2,400#
SHIPPING DIMENSIONS: 58" X 48" X 84"
NOT A CHEAP IMPORT -
MANUFACTURED IN CANADA WITH QUALITY US & CANADIAN COMPONENTS
FLOW CONTROL - ALLOWS OPERATOR TO MATCH RAM SPEED TO JOB
PRESSURE REGULATOR - LIMITS RAM PRESSURE
DOUBLE ACTING CYLINDER - PERMITS PULLING AND PRESSING
HYDRAULIC POWER LIFT TABLE
SELF LOCKING TABLE - ELIMINATES LATERAL MOVEMENT
ELECTRIC/HYDRAULIC OPERATION
HEAVY DUTY STEEL STRUCTURE
OPEN SIDES TO FACILITATE WORK ON LONG PIECES
FLAT RAM NOSE TO ALLOW USER TO ADAPT THE PRESS TO A SPECIFIC JOB.
SINGLE HAND LEVER OPERATION
CYLINDER ISO-9002 CERTIFIED
LOW SPEED PUMP
LOW SPEED BALDOR 5 HP, 230 VOLT MOTOR
|
| Electrical Description |
|
|
| Comments: |
|
|
|
|
We found 4 matching ads. Now displaying the remaining 4 ads.
| FOR SALE: Year - Make - Hypertherm Model - Max 200 |
|---|
| FOR SALE: Ad # 9516 , Year = , Make = Hypertherm , Model = Max 200 |
|
|
Category: Plasma
|
Capacity: 2" mild steel max, 1" recommended.
|
| Ad #
9516 |
| Year:
|
|
| Make:
| Hypertherm
|
| Model:
| Max 200
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 800 pds.
|
| Dimension: L x W x H | 41" x 28" x 43" |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Component of Turret Punch System ad #9517
Capacity
Mild Steel
Dross free
Production (pierce)
Severence (edge starts)
25 mm (1")
25 mm (1")
50 mm (2")
Stainless Steel Production (pierce)
Severence (edge starts) 25 mm (1")
50 mm (2")
Aluminum Production (pierce)
Severence (edge starts) 25 mm (1")
50 mm (2")
Speed*
(Mild steel)
Optimum quality 12 mm (1/2")
2159 mm/m
(85 ipm)
Cut angle ISO 9013 range** 4-5
Weldability
Ready to weld
Process gases
by material
(Plasma/shield) Mild steel
Stainless steel
Aluminum
Air/Air, O2/Air,
N2, CO2
Air/Air, N2/Air,
N2/CO2, H35/N2
Air/Air, N2/Air,
N2/CO2, H35/N2
Process amps Not all processes available
for all materials 40-200
beveling (200)
30 ft leads
|
| Electrical Description |
|
|
| Comments: |
- Spare parts included-several torch tips
|
|
|
| FOR SALE: Year - Make - Trumph Model - TLF 2000 |
|---|
| FOR SALE: Ad # 9511 , Year = , Make = Trumph , Model = TLF 2000 |
|
|
Category: Laser
|
Capacity: 2000 Watt
|
| Ad #
9511 |
| Year:
|
|
| Make:
| Trumph
|
| Model:
| TLF 2000
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: | 20,000
|
| Dimension: L x W x H | 30' x 30' x 8' |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Cuts 5' x 8'.
Trumph Trumatic L2503.
BKW resonator, model#WRK71/MT125TRO,
s#92072305.
|
| Electrical Description |
|
|
| Comments: |
- Machine was professionally deinstalled and is in storage in Asheville.
|
|
|
| FOR SALE: Year - 1993 Make - Mitsubishi Model - 2512HC |
|---|
| FOR SALE: Ad # 9329 , Year = 1993 , Make = Mitsubishi , Model = 2512HC |
|
|
Category: Laser
|
Capacity: 1600 Watt, 3000 Watt peak, 4'x8'
|
| Ad #
9329 |
| Year:
| 1993
|
| Make:
| Mitsubishi
|
| Model:
| 2512HC
|
| Condition:
| Needs Work
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | Requires rigger
|
| Weight: | 23,318 pds.
|
| Dimension: L x W x H | 223"x91"x89" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- 1600 Watt continuous 3000 Watt Pulse
5 axis machine
Hypertherm non-contact upgrade in 2008
AQ0A08LX2 MC Chiller new in 2001
Torit Downflow model #DF 2DF4
5"-7.5" focal length
LC10B2 control simultaneous XYZ w/color
monitor
RS232
Resonator dims. 79"x19"x62"
96"x48" max. workpiece
Max Stroke X,Y,Z = 98.42"x49.20"x5.90"
Max rapid 30m/min, max feed 15m/min.
Air clamp
Mayfran conveyer
Control cab. dims. 42"x24"x69"
Demos welcome
Note:needs a blower,minor maint service..
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 95 Make - ESAB L-TEC Model - Avenger 1 CNC Oxy. Acet. |
|---|
| FOR SALE: Ad # 9111 , Year = 95 , Make = ESAB L-TEC , Model = Avenger 1 CNC Oxy. Acet. |
|
|
Category: Flame
|
Capacity: 8'x20', 4 torch CNC Burn Table
|
| Ad #
9111 |
| Year:
| 95
|
| Make:
| ESAB L-TEC
|
| Model:
| Avenger 1 CNC Oxy. Acet.
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | Requires rigger
|
| Weight: |
|
| Dimension: L x W x H | 12'x6'x5' broken down |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Series 2000/70 control, table approximate 30' long, 30" high w/slag troughs, etc.
|
| Electrical Description |
|
|
| Comments: |
- Includes extra tips, Operating Instruction Manual.
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - Make - Porter Cable 80 gal. Model - JetStream |
|---|
| FOR SALE: Ad # 9114 , Year = , Make = Porter Cable 80 gal. , Model = JetStream |
|
|
Category: Air Compressors, Piston Type
|
Capacity: 7 hp, 80 gal.
|
| Ad #
9114 |
| Year:
|
|
| Make:
| Porter Cable 80 gal.
|
| Model:
| JetStream
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | 30"x30"x60" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 175 psi max, 16.8SCFM @90psi, 17.3SCFM @40psi.
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Husky Model - PRO |
|---|
| FOR SALE: Ad # 9113 , Year = , Make = Husky , Model = PRO |
|
|
Category: Air Compressors, Piston Type
|
Capacity: 7 HP, 80 gal., 2 machines available.
|
| Ad #
9113 |
| Year:
|
|
| Make:
| Husky
|
| Model:
| PRO
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | 30"x30"x60" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Motor Starter built in, 12.6 SCFM@90psi, 175 psi max.
|
| Electrical Description |
|
|
| Comments: |
|
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - Make - HPM Model - Mark 1 |
|---|
| FOR SALE: Ad # 9697 , Year = , Make = HPM , Model = Mark 1 |
|
|
Category: Injection Molding Machines
|
Capacity: 700 Ton
|
| Ad #
9697 |
| Year:
|
|
| Make:
| HPM
|
| Model:
| Mark 1
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 50,000?
|
| Dimension: L x W x H | 50'x12'x10' |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- #M7001XV110
All Hydraulic.
Tonnage- 700
Shot size-6” Max
Daylight Opening- 70”
Preheater, dryer, included.
Pictured feeder optional.
Approximate 54" open.
Approximate 34" between approximate 6.750" dia. rams.
|
| Electrical Description |
|
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - Make - Motoman Model - XRC |
|---|
| FOR SALE: Ad # 9358 , Year = , Make = Motoman , Model = XRC |
|
|
Category: Welding Robots
|
Capacity: 5 axis
|
| Ad #
9358 |
| Year:
|
|
| Make:
| Motoman
|
| Model:
| XRC
|
| Condition:
| Demo Machine
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | Requires rigger
|
| Weight: | 9,000 pds.
|
| Dimension: L x W x H | 20'x10'x8' |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Motoman 5 axis/Miller welding system.
New Power Source.
Robot rebuilt 2005 by RobotWorx and marketed as complete system including automated turntable and light curtains.
Only welded 15 prototype parts and performed beautifully.
Miller Coolmate 4 air cooled torch system approximate new cost $3,500.00.
Almega Clean Kit.
Yasnac XRC Contoller.
Motoman UP6 XRC - Single UP6 XRC reconditioned medium reach robot with 6kg payload capacity. Requires 3-phase 208VAC incoming power.
Unit includes: robotic manipulators, controller, and programming pendant.
Indexing Table - 180 degree indexing table mounted on a common base with robot, power supply, and controls.
Miller AutoInvision II - 450 amp Pulsing/CV power source with air cooled welding torch, safety holder & wire feeder. Requires 3-phase 230VAC or 480VAC power.
Operator Station - Start A and B, E-stop, Servo-On, Hold, Re-Start.
Operation mode Vertically articulated
Degree of freedom 6
Payload 6 kg
Repetitive positioning accuracy2
2. Conformed to ISO9283.
±0.08 mm
Motion
range
S-axis (turning) ±170°
L-axis (lower arm) +155°, -90°
U-axis (upper arm) +190°, -170°
R-axis (wrist roll) ±180°
B-axis (wrist pitch/
yaw)
±135°
T-axis (wrist twist) ±360°
Maximum
speed
S-axis 2.44 rad/s, 140°/s
L-axis 2.79 rad/s, 160°/s
U-axis 2.97 rad/s, 170°/s
R-axis 5.85 rad/s, 335°/s
B-axis 5.85 rad/s, 335°/s
T-axis 8.73 rad/s, 500°/s
Allowable
moment3
3. Refer to chapter "Allowable wrist load" for details on the permissible
moment of inertia
R-axis 11.8 Nm (1.2 kgfm)
B-axis 9.8 Nm (1.0 kgfm)
T-axis 5.9 Nm (0.6 kgfm)
Allowable
inertia
(GD2/4)
R-axis 0.24 kgm2
B-axis 0.17 kgm2
T-axis 0.06 kgm2
Mass 130 kg
Ambient
conditions
Temperature 0° to 45C°
Humidity 20 to 80% RH (non-condensing)
Vibration Less than 0.5 G
Others Free from corrosive gasses,
liquids or explosive gasses.
Clean and dry
Free from excessive electrical noise
(plasma)
Power capacity
|
| Electrical Description |
|
|
| Comments: |
|
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - Make - Holcroft Model - Shaker Furnace |
|---|
| FOR SALE: Ad # 9279 , Year = , Make = Holcroft , Model = Shaker Furnace |
|
|
Category: Box Type Furnaces
|
Capacity: Shaker Furnace :600 pds. per hour
|
| Ad #
9279 |
| Year:
|
|
| Make:
| Holcroft
|
| Model:
| Shaker Furnace
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | Requires rigger
|
| Weight: | 20000
|
| Dimension: L x W x H | 13'x 9' x 8.5' (furnace) |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Shaker Furnace and Quench/Elevator. Nearly new
Eclipse burners and recuperators, natural gas,600
pds. per hour. Quench/elevator measures 11' x 4.5'
x 15'. Heat treat tray measures 9' long.
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| FOR SALE: Year - 82 ?? Make - Komatsu Model - FG25SHT-12 |
|---|
| FOR SALE: Ad # 9208 , Year = 82 ?? , Make = Komatsu , Model = FG25SHT-12 |
|
|
Category: Forklifts / Lift Trucks (All Types)
|
Capacity: 4,480 lb. w/sideshift
|
| Ad #
9208 |
| Year:
| 82 ??
|
| Make:
| Komatsu
|
| Model:
| FG25SHT-12
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 8,840
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Capacity:5,000 Lbs. @ 24¡¨ Load Center
New Hoses and Steering/Hydraulics Value
EQUIPMENT SPECIFICATIONS:
UPRIGHT SPECIFICATIONS:
Lift Height:188.5"
Lowered Height:85.5"
Freelift:37.5"
Carriage:37" Class II
Tilt:6„a F X 5„a B
Valve Group:3-Way
Hose Group:3-Way
Drives Tires:Cushion
Steer Tires:Cushion
ENGINE: LP Gas Nissan Model H20 Series II, Heavy
Duty Cast Iron Block and Head, 49 HP @
2400 RPM
TRANSMISSION: Toraflow㤠Single Speed Powershift,
with Column Mounted direction control lever.
STEERING: Full Hydrostatic Power steering with
Standard tilt wheel and small diameter wheel to
provide a comfortable driving position for both
large and small operators.
HYDRAULICS: Load Matching hydraulic system with
load sensing valve
BRAKES: Duo-Servo self-adjusting bendix type
power brakes.
CAB: Full floating Hydraulically mounted cab,
complete with orthopedically designed bucket seat
and retractable seat belt for operator comfort and
safety. Smoothest ride in the industry.
SERVICE ACCESSIBILITY: Cowl to Counterweight
Accessibility for maintenance and daily checks.
One-Piece hood with opening latch on the truck¡¦s
left side makes it easy for the operator to
perform daily maintenance checks. Sound insulation
under the hood contributes to lowest DB level in
the industry.
4,480 pd w/sideshift,
188" lift height, 48" forks,
Nissan engine, lights, backup beeper,
4,900 hrs.
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - '06 Make - CADY Plate Lifter Model - SLT102472 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 9112 , Year = '06 , Make = CADY Plate Lifter , Model = SLT102472 |
|
|
Category: Cranes/Hoists & Manipulators
|
Capacity: 10,000 pd. Plate Lifter
|
| Ad #
9112 |
| Year:
| '06
|
| Make:
| CADY Plate Lifter
|
| Model:
| SLT102472
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | Requires rigger
|
| Weight: | 1,160 pds.
|
| Dimension: L x W x H | 6'x6'x3' |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Telescoping Lifter, drawing available, hand wheel operated w/ built in torque limiter, max bundle width 72", min. bundle width 24", Verticle clearance 16", Carrying angle length 96", support width on angle 3.125", lift loop size w/1.250" thickw/4"x10" opening.
|
|
|
| FOR SALE: Year - New Make - LiftOne Model - SM-6000 Glass Manipulator |
|---|
| FOR SALE: Ad # 9102 , Year = New , Make = LiftOne , Model = SM-6000 Glass Manipulator |
|
|
Category: Cranes/Hoists & Manipulators
|
Capacity: 6,000 Glass Manipulator
|
| Ad #
9102 |
| Year:
| New
|
| Make:
| LiftOne
|
| Model:
| SM-6000 Glass Manipulator
|
| Condition:
| New
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | Requires rigger
|
| Weight: |
|
| Dimension: L x W x H | 126"x34"x78" retracted |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 2 machines available. Owner paid 65K new, best offer. Hydraulic/pneumatic crane designed for glass but will handle nearly any plate, slab or sheet material. Powered drive unit w/built in charger. 6000lb w/96" lift ht.retracted, 2000lb. at 192" extended. Boom hydraulically lifts/lowers, extends/retracts w/pendant controls. 110V onboard powered vaccuum system,6 suction cups on 3 bars, suction draw down indicator, adjustable outriggers, MAN-3000 Articulated Glass Lifter, powered 180 degree roll, 180 degree yaw, 90 degree pitch, powered mast rotation, system designed for 700lb. 5'x9' glass panels, power mast rotation 150 degrees
|
| Electrical Description |
|
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - Make - Torit Model - VS1500 |
|---|
| FOR SALE: Ad # 9325 , Year = , Make = Torit , Model = VS1500 |
|
|
Category: Cleaning Equipment
|
Capacity:
|
| Ad #
9325 |
| Year:
|
|
| Make:
| Torit
|
| Model:
| VS1500
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | Requires rigger
|
| Weight: | 1800
|
| Dimension: L x W x H | 4'x4'x13' |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
|
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - Make - Trion Model - M26 |
|---|
| FOR SALE: Ad # 9323 , Year = , Make = Trion , Model = M26 |
|
|
Category: Cleaning Equipment
|
Capacity:
|
| Ad #
9323 |
| Year:
|
|
| Make:
| Trion
|
| Model:
| M26
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: | We can load
|
| Weight: | 800 pds
|
| Dimension: L x W x H | 3'x3'x6' |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$SOLD USD
|
|
| General Description |
- Media Air Cleaner, American made.
|
| Electrical Description |
|
|
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
