|
User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - 1987 Make - NEW BRITIAN Model - MD5S |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 2948 , Year = 1987 , Make = NEW BRITIAN , Model = MD5S | 
|
|
Category: Turning Center 11 in. & over chuck
|
Capacity: NEW BRITIAN MD5S/ 2 AXIS GILDEMEISTER CNC SLANT BED LATHE
|
| Ad #
2948 |
| Year:
| 1987
|
| Make:
| NEW BRITIAN
|
| Model:
| MD5S
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: |
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | 196" LR x 87" FB x 76" H |
Machine Location:
|
| City: |
On Request
|
| State: |
Virginia
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Center Distance: 59"
Max.Swing Over Bed: 22 7/8"
Max. Swing Over Cross Slide: 15 7/8"
Max. Colision Free Diameter: 10.23"
Spindle Bore: 3.18"
Spindle Nose: ASA Direct Bolt On Type Size 8
Max. Driving Power: 28 / 25 KW ( approx. 28 HP)
Spindle Speeds: 28 to 4000 RPM
Spindle Speeds Continuously Programmable for
Constant Cutting Speed
Feed Rates: 0.5 to 5000 MM Per Minute
Rapid Traverse Rate: 10 Meters Per Minute
Travels: Y Axis 9.64", X Axis 59.84"
12 Tool Tool Turret (6 positions for boring tools & 6
positions for turning tools)
Tool Shank Diameter 1.57" with Pinion Rack
(Trudex Type )
Tailstock Quill Diameter 3.93" Quill Stroke 4.72"
Tailstock Taper #4 Morse with Built in Center
Bearing
Tailstock Quill Hydraulic Force with Adjustable
Pressure
|
| Comments: |
- Dual Foot Pedal Chuck Controls
12" SMW 3 Jaw Air Chuck with Front Activation
Diaphram and 2 Piece Jaws
Hole Thru SMW Chuck 3 1/2"
(2) Hydraulic Roller Type Self Centering Work
Steady Rests
Harened and Ground Bed and Slide Ways, All in
Very Good Condition
Full Length Chip Conveyor
Sliding Door Type Splash Guards
Machine Work Light
2 Axis Gildemeister Automation Eltro Pilot 10 CNC
Control with 10" CRT Display
GNT 28 Taper Reader
Bosch Hydraulic System Built into Rear of Machine
Indramat Servo Drives
Coolant Pump, Pan and Pipping Built into Chip
conveyor Unit
Large Assortment of Soft Chuck Jaws
16 Turning Type Tool Holders and 20 Boring Type
Tool Holders
Have Machine Operation and Program Manuals
|
|
|
| FOR SALE: Year - 1984 Make - GILDEMEISTER Model - MD3S |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 2949 , Year = 1984 , Make = GILDEMEISTER , Model = MD3S |
|
|
Category: Turning Center 4 - 10 in. chuck
|
Capacity: MD3S GILDEMEISTER 2 AXIS CNC SLANT BED LATHE
|
| Ad #
2949 |
| Year:
| 1984
|
| Make:
| GILDEMEISTER
|
| Model:
| MD3S
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: |
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | 139" LR x 82" FB x 80" H |
Machine Location:
|
| City: |
On Request
|
| State: |
Virginia
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Center Distance: 23.62"
Max.Swing Over Bed: 22.04"
Max. Swing Over Cross Slide:
Spindle Bore: 2.44"
Spindle Nose: ASA Direct Bolt On Type Size 6
Max. Driving Power: 40 / 36 KW ( approx. 50 HP)
Spindle Speeds: 100 to 4000 RPM
Spindle Speeds Continuously Programmable for Constant Cutting Speed
Feed Rates: 0.001" to 500" Per Revolution
Rapid Traverse Rate: 10 Meters Per Minute
12 Tool Tool Turret (6 positions for boring tools & 6 positions for turning tools)
Tool Shank Diameter 1.57" with Pinion Rack (Trudex Type )
Tailstock Quill Stroke 4.72"
Tailstock Taper #5 Morse
Tailstock Quill Hydraulic Force with Adjustable Pressure
|
| Comments: |
- Dual Foot Pedal Chuck Controls
8" SMW 3 Jaw Air Chuck with Rear Activation Diaphram and 2 Piece Jaws
(no thru hole)
Harened and Ground Bed and Slide Ways, All in Very Good Condition
Full Length Chip Conveyor
Sliding Door Type Splash Guards
Machine Work Light and Spindle Load Meter
2 Axis Gildemeister Automation Eltro Pilot M CNC Control
Control has 3 1/4" x 7" CRT Display and Taper Reader
Bosch Hydraulic System Built into Rear of Machine
Indramat Servo Drives
Coolant Pump, Pan and Pipping Built into Chip conveyor Unit
Large Assortment of Soft Chuck Jaws
9 Turning Type Tool Holders and 20 Boring Type Tool Holders
Have Machine Operation and Program Manuals
Machine Parts and Service Available thru DMG America (Ph. 704-583-1193)
Chip Conveyor 120" LR x 31" FB x 56" H
Box of Tooling 32" LR x 46" FB x 28" H
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - Make - LVD Model - 165 BH |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 3116 , Year = , Make = LVD , Model = 165 BH |
|
|
Category: Press Brakes (Hydraulic)
|
Capacity: LVD CNC Press Brake Model 165 BH
|
| Ad #
3116 |
| Year:
|
|
| Make:
| LVD
|
| Model:
| 165 BH
|
| Condition:
|
|
| Serial #:
| On Request
|
|
| Machine Status: | Under Power
|
| Shipping Info: |
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 217" Bending length
New in 1985 (currently in plant under power)
Distance between side frames: 148"
40" Horn on right side
Distance between bed and ram: 13.8" Max
Stroke of ram: 5.9" max., Adjustment of ram 4.7"
Depth of gap in side frame: 9.8"
Motor 18 Hp, 230/460 3 phase
Slot and pit required for bed
Back gauge range increased from 24" to 40" at time of purchase Work lifting system Equipped with: Axis X1, X2, R, Z1, Z2, U, V, Alpha-numeric keyboard, tape recorder, programmable speed
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1958 Make - WIEDEMANN Model - R2 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 2947 , Year = 1958 , Make = WIEDEMANN , Model = R2 |
|
|
Category: Powered: Hole/ Turret Punches
|
Capacity: 5 TON WIEDEMANN TURRET PUNCH PRESS
|
| Ad #
2947 |
| Year:
| 1958
|
| Make:
| WIEDEMANN
|
| Model:
| R2
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: |
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | 13" L-R x 26" F-B x 26" H |
Machine Location:
|
| City: |
On Request
|
| State: |
Virginia
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 12 Stations
Manual Punching Via Hand Lever
Tooling: Round Punches & Dies for 1/8" to 1-1/4" in 1/8" Increments
(Missing 1-1/4" Punch)
Center of Punch to Machine Frame (Throat): 12"
Stroke: 3/4"
Setting on a Custom Steel Table with Wheels
Overall Table Size: 25-1/2" L-R x 33-1/4" F-B x 34" H
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - Make - Model - |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 2952 , Year = , Make = , Model = |
|
|
Category: Coil Cradles
|
Capacity: COOPER WEYMOUTH COIL CRADLE
|
| Ad #
2952 |
| Year:
|
|
| Make:
|
|
| Model:
|
|
| Condition:
|
|
| Serial #:
| On Request
|
|
| Machine Status: |
|
| Shipping Info: | We can load
|
| Weight: | Approx. 750 Lb
|
| Dimension: L x W x H | 34” L-R x 52” F-B x 77” H |
Machine Location:
|
| City: |
On Request
|
| State: |
Virginia
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Maximum Coil Weight: 2,500 Lb.
Maximum Coil Width: 12”
Maximum Coil Outside Diameter: 42”
(2) Steel Coil Keeper Plates that are Manually Adjustable for Material Width
Loop Arm Control
Approx. 1/2 HP Motor
Floor Model Type on a Custom Angle Iron Stand 27” High
|
| Electrical Description |
|
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - Make - GRIEVE Model - BMPC8126 |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 2946 , Year = , Make = GRIEVE , Model = BMPC8126 |
|
|
Category: Heat Treat Ovens
|
Capacity: GRIEVE ELECTRIC OVEN
|
| Ad #
2946 |
| Year:
|
|
| Make:
| GRIEVE
|
| Model:
| BMPC8126
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: |
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | 21" L-R x 29" F-B x 41-1/2" Hi |
Machine Location:
|
| City: |
On Request
|
| State: |
Virginia
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Amps = 4 KW
Chamber Size: 7-3/4" L-R x 15" F-B x 6" High
Separate Omega Digital Thermometer with 12" Long Temperature Probe
Dial Type Honeywell Temperature Thermostat
Dial Readings: 0 to 1000 Degrees C & 0 to 2000 Degrees F
Maximum Operating Temperature: Unknown
Electric Coil Type Heating Elements on All 4 Sides of Chamber
Door Slides Up For Access & Has Counter Weight
Temperature Probe Protrudes in from Rear Wall of Chamber
Chamber Refractory & Elements are in Good Condition
|
| Electrical Description |
- Wired for Single Phase, 60 Cycle, 208 Vo
|
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - Make - Porter Model - 300CM |
|---|
|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 2945 , Year = , Make = Porter , Model = 300CM |
|
|
Category: Planers / Jointers
|
Capacity: 24" PORTER WOOD JOINTER
|
| Ad #
2945 |
| Year:
|
|
| Make:
| Porter
|
| Model:
| 300CM
|
| Condition:
|
|
| Serial #:
| On Request
|
|
| Machine Status: |
|
| Shipping Info: | We can load
|
| Weight: | Approx. 3000 Lbs
|
| Dimension: L x W x H | 98" L-R x 58" F-B x 42" High |
Machine Location:
|
| City: |
On Request
|
| State: |
Virginia
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Blade Length: 24"
Number of Knives: 4
Replaceable Type Blade Knives
Front Table Size: 32 1/4" x 49 3/4"
Rear Table Size: 32 1/4" x 44 3/4"
Front & Rear Tables Are Independently Adjustable
Guide Fence: 6 1/2" High x 53" Long
Floor To Table Top: 33 1/2" Approx.
|
| Electrical Description |
|
|
| Comments: |
- Guide Fence is Adjustable for Tilt and Position on Table
Table Edge at Knife Area is Replaceable
Made of Heavy Duty Cast Iron Construction
NO Table Blade Guard
10 HP Direct Drive Motor, 3600 RPM
|
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
