|
User SearchYour search results (if any) appear below in groups of 75 for each section.
CNC Lathes & Turning Centers
We found 8 matching ads. Now displaying the remaining 8 ads.
| FOR SALE: Year - 2001?? Make - Hardinge/Emag Model - VL 5 |
|---|
| FOR SALE: Ad # 10980 , Year = 2001?? , Make = Hardinge/Emag , Model = VL 5 | 
|
|
Category: Vertical Spindle Lathe
|
Capacity:
|
| Ad #
10980 |
| Year:
| 2001??
|
| Make:
| Hardinge/Emag
|
| Model:
| VL 5
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 16,000
|
| Dimension: L x W x H | 106 x 78 x 95 |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Hardinge-Emag VL5
options: coolant flush
VDI tooling
MPG handwheel
live c axis
coolant thru spindle
3 jaw chuck 10"
Below are std. catalog specs-please verify
NUMBER OF STATIONS (PART PALLETS) 12
PART TO PART (LOAD/UNLOAD TIME) 4.5 - 6.5 SEC.
MAX. TURNING DIAMETER 10.3"
MAXIMUM TURNING LENGTH 4.7"
X AXIS TRAVEL 22.4"
Z AXIS TRAVEL 7.87"
C AXIS CONTOURING 0.001�
RAPID TRAVERSE RATE X AXIS 2362 IPM
RAPID TRAVERSE RATE Z AXIS 1181 IPM
SPINDLE NOSE A2-6
SPINDLE SPEEDS 50 - 4,500 RPM
SPINDLE MOTOR 36 HP
TURRET CAPACITY (ALL CAN BE LIVE) 12
STATIONS
LIVE TOOL MOTOR 16 HP
LIVE TOOL SPEEDS 300 - 6,000 RPM
APPROXIMATE DIMENSIONS 106" x 78" x 95"
MACHINE WEIGHT (APPROXIMATE) 15,500 LBS
Equipped With:
FANUC 18iT CNC CONTROL WITH 10" FULL COLOR
LCD
RS-232C PORT INTERFACE FOR DNC OPERATION
10" HYDRAULIC CHUCK,AUTO PART LOADING AND
UNLOADING FULLY AUTOMATIC
STANDARD COOLANT SYSTEM WITH TANK & PUMP
REAR DISCHARGE LIFT-UP CHIP CONVEYOR WITH
CART
FULLY ENCLOSED GUARDING, (1) LIVE TOOL
HOLDER
ASSORTED TOOL HOLDERS, ALL AVAILABLE
MANAULS
includes approx: 10 tool holders
Sold for over 150K new
|
| Electrical Description |
|
|
| Comments: |
- was cutting both steel and aluminium..very few hrs
of cut time about 5 months.
Machine has been disconnected for 2 about years in storage without power and
batteries in control are drained ...so getting servo
drive fault ..need to reload basic parameters
...dont feel its anything major..issue has occurred
before and easily fixed by factory tech-have service reports
|
|
|
| FOR SALE: Year - 1998 Make - Harrison Model - Alpha 460 Plus |
|---|
| FOR SALE: Ad # 10979 , Year = 1998 , Make = Harrison , Model = Alpha 460 Plus |
|
|
Category: Combination (teach lathe) CNC / Manual
|
Capacity: 22" swing x 72" centers
|
| Ad #
10979 |
| Year:
| 1998
|
| Make:
| Harrison
|
| Model:
| Alpha 460 Plus
|
| Condition:
| Needs Work
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 8000 ?
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Harrison Alpha 460 plus teach lathe
1998
22 swing x 72" centers
control: GE Fanuc
spindle rpm: 20-2000
12" 3 jaw chuck
3-1/8" spindle bore
15HP main spindle motor
x drive pops fuses
spindle little noise...
RS232 port
electrical cabinet looks clean inside.
|
| Electrical Description |
|
|
|
|
| FOR SALE: Year - 82/83? Make - OKUMA Model - LC30-2SC |
|---|
| FOR SALE: Ad # 7305 , Year = 82/83? , Make = OKUMA , Model = LC30-2SC |
|
|
Category: Turning Center 11 in. & over chuck
|
Capacity: OKUMA LC30-2SC 4-AXES CNC LATHE
|
| Ad #
7305 |
| Year:
| 82/83?
|
| Make:
| OKUMA
|
| Model:
| LC30-2SC
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- OSP CNC Control Model 3000
Swing over bed: 19.69”
Swing over cross slide: l6.l4”
Chucking part diameter maximum: l7.72”
Bar capacity (standard): 2.5”
Axis Travel
“X” Axis stroke - Upper Turret: 9.06”
------------------Lower Turret: 5.3l”
“Z” Axis stroke - Upper Turret: 20.47”
------------------Lower Turret: l9.69”
Spindle nose: ASA-A2-8
Standard through hold: 3.03"
Spindle drive motor: 40 HP
Spindle speeds (4 ranges): l5-3000 RPM
Infinite variable
Rapid traverse rate:
“Z” Axis: 400 IPM
“X” Axis: 200 IPM
Turrets (2) : l2 & 8 Stations
Equipped with:
Chip Conveyor
|
| Electrical Description |
|
|
| Comments: |
|
|
|
|
| FOR SALE: Year - 90s Make - IEMCA Model - 542 CNC 37 |
|---|
| FOR SALE: Ad # 13112 , Year = 90s , Make = IEMCA , Model = 542 CNC 37 |
|
|
Category: CNC Lathe Part & Accessories
|
Capacity: 12ft 1" 1/2" Max
|
| Ad #
13112 |
| Year:
| 90s
|
| Make:
| IEMCA
|
| Model:
| 542 CNC 37
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: |
|
| Shipping Info: | We can load
|
| Weight: | 2500
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Iemca
12Ft Bar Feed 1 1/2"
230 Voltage
Model Boss 542 CNC/37
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 2006 Make - SMW Model - SpaceSaver 2200 |
|---|
| FOR SALE: Ad # 13113 , Year = 2006 , Make = SMW , Model = SpaceSaver 2200 |
|
|
Category: CNC Lathe Part & Accessories
|
Capacity: 1/4"- 3-1/8" bar 5 Ft
|
| Ad #
13113 |
| Year:
| 2006
|
| Make:
| SMW
|
| Model:
| SpaceSaver 2200
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 300
|
| Dimension: L x W x H | 6'x 2' 4' |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- SMW Spacesaver 2200
BARSTOCK DIAMETER 1/4"- 3-1/8"
BARSTOCK LENGTH 6" - 66" LONG
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1996 Make - HAAS Model - HL-4 |
|---|
| FOR SALE: Ad # 13110 , Year = 1996 , Make = HAAS , Model = HL-4 |
|
|
Category: Turning Center 11 in. & over chuck
|
Capacity: 14.5" x 39"
|
| Ad #
13110 |
| Year:
| 1996
|
| Make:
| HAAS
|
| Model:
| HL-4
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: | 7000?
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- HAAS
HL-4
Voltage 230/3
10" Chuck
MAX SWING OVER FRONT APRON 24"
SWING OVER CROSS SLIDE 9.5"
MAXIMUM TURNING DIAMETER 14.5"
DISTANCE BETWEEN CENTERS 39"
MAXIMUM CUTTING LENGTH 34"
X AXIS TRAVEL 11.3"
Z AXIS TRAVEL 34"
RAPID TRAVERSE RATE X & Z AXES 710 IPM
SPINDLE BORE 3.0"
MAXIMUM BAR CAPACITY 2.5"
SPINDLE SPEEDS 3400 RPM
SPINDLE MOTOR 30 HP
TURRET CAPACITY 12 STATIONS
Tail stock
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1993 Make - Mazak Model - CF UNI 8C |
|---|
| FOR SALE: Ad # 13111 , Year = 1993 , Make = Mazak , Model = CF UNI 8C |
|
|
Category: CNC Lathe Part & Accessories
|
Capacity: Cut Feeder 80 12ft Bar feed
|
| Ad #
13111 |
| Year:
| 1993
|
| Make:
| Mazak
|
| Model:
| CF UNI 8C
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 3600
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Mazak Cut Feeder 80
Year 1993
12Ft Bar Feed
1" 3/4" Max
Voltage 480
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1986 Make - Mori seiki Model - SL-3H |
|---|
| FOR SALE: Ad # 13084 , Year = 1986 , Make = Mori seiki , Model = SL-3H |
|
|
Category: Turning Center 11 in. & over chuck
|
Capacity: 22.2" x 24"
|
| Ad #
13084 |
| Year:
| 1986
|
| Make:
| Mori seiki
|
| Model:
| SL-3H
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 12,000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Mori Seiki
Model SL-3H
Control Fanuc System 6T
22" x 24" Swing
13" Swing over Carriage
12 Station Tool Changer
Tail Stock
3 Jaw 10" Chuck
Needs spindle drive Board, we replaced the drive 3
years ago. Both times the spindle drive went out
we had a power outage. We decided to take out of
surface because one chucking job ran on it 4-5
days a month and we needed the space. Machine
runs solid like a Mori and is a good machine for
chucking.
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| FOR SALE: Year - 1990's Make - Victor/fortune Model - 1660 |
|---|
| FOR SALE: Ad # 10976 , Year = 1990's , Make = Victor/fortune , Model = 1660 |
|
|
Category: General Purpose Lathe 15in. to 23in. swing
|
Capacity: 16 swing x 60 centers
|
| Ad #
10976 |
| Year:
| 1990's
|
| Make:
| Victor/fortune
|
| Model:
| 1660
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 4000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Victor 1660 lathe
16" swing over ways
60" center distance
inch/metric threading
7" 3 jaw chuck
9.5" steady rest
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - Make - Oelikon Model - DMI |
|---|
| FOR SALE: Ad # 5178 , Year = , Make = Oelikon , Model = DMI |
|
|
Category: Heavy Duty Large Lathe 24in. & over swing
|
Capacity: Swiss Built 24" x 108" Gap Bed Lathe
|
| Ad #
5178 |
| Year:
|
|
| Make:
| Oelikon
|
| Model:
| DMI
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Oelikon Swiss Built
24" x 108" Gap Bed Lathe
Swing: 24"
centers 108"
Swing Over Cross Slides: 18"
Inch + Metric Threading
Spindle Bore: 1-1/2"
Spindle Speeds: 40 - 1,000 rpm
Coolant
note: no tailstock
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1968 Make - Martin Model - DS-99 |
|---|
| FOR SALE: Ad # 7301 , Year = 1968 , Make = Martin , Model = DS-99 |
|
|
Category: Heavy Duty Large Lathe 24in. & over swing
|
Capacity: 40" x 176" Engine Lathe
|
| Ad #
7301 |
| Year:
| 1968
|
| Make:
| Martin
|
| Model:
| DS-99
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Swing over Ways: 40" (approx)
Distance Between Centers: 178" (from spindle nose to END of Bed)
Spindle Through Bore: 3-1/2"
|
| Electrical Description |
|
|
| Comments: |
- NOTE: Does have a tailstock "Body" mounted, ie not a full tailstock - see photographs
This was re-designed to do a special job in the aero-space industry
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| FOR SALE: Year - 1984 Make - Mitsui Seiki Model - VR-5A |
|---|
| FOR SALE: Ad # 4991 , Year = 1984 , Make = Mitsui Seiki , Model = VR-5A |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: Twin Spindle, Twin ATC, Mitsui Seiki VR5A VMC, Ideal for Turbine Manf.
|
| Ad #
4991 |
| Year:
| 1984
|
| Make:
| Mitsui Seiki
|
| Model:
| VR-5A
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 25,000
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Three IDENTICAL MACHINES AVAILABLE!!
Control: Fanuc 6MB
Table: 58" x 24"
Table w. Coolant Trough: 70" x 36"
Twin CAT 50 Spindles
Twin 20 Station ATC's
Splash guard Type (Factory) Enclosure
|
| Electrical Description |
|
|
| Comments: |
- 2 available
Very recently removed from an Aerospace company and was in excellent working order
can be fully crated but not loaded in container
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1991? Make - Enshu Model - JE60 |
|---|
| FOR SALE: Ad # 13081 , Year = 1991? , Make = Enshu , Model = JE60 |
|
|
Category: Horizontal Machining Centers (HMC)
|
Capacity: 15.7 x 15.7 400mm
|
| Ad #
13081 |
| Year:
| 1991?
|
| Make:
| Enshu
|
| Model:
| JE60
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Enshu Model JE60
Enac Control
400mm Pallet 15.7 x 15.7
23.6 x 23.6 x 23.6
Cat 40 Tool
60 Station Tool Changer
|
| Electrical Description |
|
|
| Comments: |
- Two Identical Machines Available.
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 89? Make - Mitsui Seiki Model - VS5A-DS |
|---|
| FOR SALE: Ad # 9151 , Year = 89? , Make = Mitsui Seiki , Model = VS5A-DS |
|
|
Category: Vertical Machining Centers (VMC)
|
Capacity: 3 axis, double spindle
|
| Ad #
9151 |
| Year:
| 89?
|
| Make:
| Mitsui Seiki
|
| Model:
| VS5A-DS
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 28,500
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- Machine out of aerospace facility.
Double 50 taper spindles with 30 tool ATC x
2.
Fanuc 12M,
table 59" x 23",
travels X42.5", Y24", Z24",
3500 RPM, 20HP,
maintenance records,
no rigger needed
Std, Specs please verify-below
.CNC 3-AXIS TWIN SPINDLE VERTICAL MACHINING
CENTER
SPECIFICATIONS:
TABLE SIZE: 59.1"x23.6"
TRAVELS - X AXIS: 42.5"
- Y AXIS: 24"
- Z AXIS: 24"
MAX. LOAD ON TABLE: 3307 LBS
SPINDLE SPEEDS: 15-12,000 RPM
SPINDLE MOTOR (X2): 20 HP
SPINDLE TAPER: 50
RAPID TRAVERSE RATE: 472 IPM
CUTTING TRAVERSE RATE: 157 IPM
ATC CAPACITY (X2): 30 TOOLS
MACHINE WEIGHT: 28,500 LBS
EQUIPPED WITH:
FANUC 12M CNC CONTROL
|
| Electrical Description |
|
|
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - Make - Hardinge Model - AHC |
|---|
| FOR SALE: Ad # 13083 , Year = , Make = Hardinge , Model = AHC |
|
|
Category: Hydraulic & Collet Chuckers
|
Capacity: 6" x10"
|
| Ad #
13083 |
| Year:
|
|
| Make:
| Hardinge
|
| Model:
| AHC
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
|
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 70s Make - Hardinge Model - DSM-A |
|---|
| FOR SALE: Ad # 13082 , Year = 70s , Make = Hardinge , Model = DSM-A |
|
|
Category: Hydraulic & Collet Chuckers
|
Capacity: 6" x 10"
|
| Ad #
13082 |
| Year:
| 70s
|
| Make:
| Hardinge
|
| Model:
| DSM-A
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Hardinge
Model DSM-A
HP 4
Voltage 230/3 Phase
6 Station Tool Post
Cutt Off Tool
Two Cross Tools
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 2 matching ads. Now displaying the remaining 2 ads.
| FOR SALE: Year - ?? Make - American Tool Works Model - 6ft arm |
|---|
| FOR SALE: Ad # 10977 , Year = ?? , Make = American Tool Works , Model = 6ft arm |
|
|
Category: Radial Drill Press
|
Capacity: 16" dia column x 6ft arm
|
| Ad #
10977 |
| Year:
| ??
|
| Make:
| American Tool Works
|
| Model:
| 6ft arm
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 12000 ?
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- 16" dia column
6 ft arm
5MT spindle
Drill, ream, tap cycles
spindle 40-1700 RPM
10 HP
includes electrical prints
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - Make - Cincinati-Brickford Model - 5E707 |
|---|
| FOR SALE: Ad # 5183 , Year = , Make = Cincinati-Brickford , Model = 5E707 |
|
|
Category: Radial Drill Press
|
Capacity: Large 6' arm x 16" column drill
|
| Ad #
5183 |
| Year:
|
|
| Make:
| Cincinati-Brickford
|
| Model:
| 5E707
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 15,000?
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- 6'arm x 16" column dia.
4' x 14' base
20 HP
5" spindle
tilt work table
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 15 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - Make - Landis Model - 767/1 R-Universal |
|---|
| FOR SALE: Ad # 5179 , Year = , Make = Landis , Model = 767/1 R-Universal |
|
|
Category: Cylindrical Grinders (O.D. & I.D.)
|
Capacity: 14" x 30" Landis OD Grinder
|
| Ad #
5179 |
| Year:
|
|
| Make:
| Landis
|
| Model:
| 767/1 R-Universal
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Landis 767/1 R-Universal grinder
Swing: 14"
Distance Between Centers: 30"
Wheel Diam. 14"
NOTE: ID attachment on machine without ID spindle
|
| Electrical Description |
|
|
| Comments: |
- Includes an 8" 4-Jaw Chuck
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - Make - Foster Model - 10-Ton |
|---|
| FOR SALE: Ad # 7306 , Year = , Make = Foster , Model = 10-Ton |
|
|
Category: Hydraulic H-Frame Press
|
Capacity: 10-Ton Hydraulic Press With Video Camera
|
| Ad #
7306 |
| Year:
|
|
| Make:
| Foster
|
| Model:
| 10-Ton
|
| Condition:
| Very Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Capacity: 10-Ton
Distance Between Columns: 48"
Work Height: 38"
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
We found 1 matching ad. Now displaying the final ad.
| FOR SALE: Year - 1996 Make - Nisshinbo Model - 11250HK |
|---|
| FOR SALE: Ad # 13114 , Year = 1996 , Make = Nisshinbo , Model = 11250HK |
|
|
Category: Laser
|
Capacity: 4" x 8"
|
| Ad #
13114 |
| Year:
| 1996
|
| Make:
| Nisshinbo
|
| Model:
| 11250HK
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
South Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Nisshinbo LCM 1250HK Mk II
PRC LASER
SL 2200
Year 1996
Voltage 460
4ft x 8ft Table
NISSHINBO 32 Bit high speed multitasking
machine
control with graphic programming, RS-232C
Interface and 3.5" floppy disk drive.
Koolant Kooler High capacity chiller with
dual
cooling circuit.
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
We found 3 matching ads. Now displaying the remaining 3 ads.
| FOR SALE: Year - late 80s Make - Kawaguchi Model - KM80 I |
|---|
| FOR SALE: Ad # 12342 , Year = late 80s , Make = Kawaguchi , Model = KM80 I |
|
|
Category: Injection Molding Machines
|
Capacity: 88 Ton
|
| Ad #
12342 |
| Year:
| late 80s
|
| Make:
| Kawaguchi
|
| Model:
| KM80 I
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: |
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Kawaguchi KM80 I
Clamp Tonnage 88 US ton
Shot Volume 7.20 cubic inches
Injection Pressure 25,500 PSI
Voltage 208 and 600 Volts
Platen Size 20.87" x 20.87"
Distance Between Tie Bars 14.17" x 14.17"
Min Mold Height 7.06"
Max Mold Height 13.78"
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1990 Make - Van Dorn Model - 55-RS-2 |
|---|
| FOR SALE: Ad # 13080 , Year = 1990 , Make = Van Dorn , Model = 55-RS-2 |
|
|
Category: Injection Molding Machines
|
Capacity: 55 Ton
|
| Ad #
13080 |
| Year:
| 1990
|
| Make:
| Van Dorn
|
| Model:
| 55-RS-2
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: |
|
| Dimension: L x W x H | 7ft x 13ft x 6ft |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Van Dorn
Model 55-RS-2
Year 1990
55 Ton
21" x 23" Pallet
13" Between Columns
Hours 761186
Stroke 16"
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 10 % Buyers Premium applies to the final sale price of this item
|
|
| FOR SALE: Year - 1992 Make - Toshiba Model - ISF 190 S II 10A |
|---|
| FOR SALE: Ad # 13064 , Year = 1992 , Make = Toshiba , Model = ISF 190 S II 10A |
|
|
Category: Injection Molding Machines
|
Capacity: 190 Tons
|
| Ad #
13064 |
| Year:
| 1992
|
| Make:
| Toshiba
|
| Model:
| ISF 190 S II 10A
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | In Storage
|
| Shipping Info: | We can load
|
| Weight: | 10,000
|
| Dimension: L x W x H | 18.5’ X 3.8’ X 6.9’ |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Toshiba Plastic Injections Mold Machine
Model ISF 190S II - 10A
Year 1992
3500 PSI Max
30 Hp Feed Pump
Feed Temp 0-800 F
20" between rails
Opens 32" Wide
TONNAGE: 190 TONS
SHOT SIZE: 16 OZ
TIE BAR SPACING: 20.1" X 20.1"
PLATEN DIMENSIONS: 29.1" X 29.1"
MAX. DAYLIGHT: 33.5"
MIN. DAYLIGHT: 7.5"
EJECTOR STROKE: 3.9"
CLAMP STROKE: 26"
ELECTRICS: 460 VOLT
Weight and size of machine & acc:
Injection Molding Machine
18.5’ X 3.8’ X 6.9’ 10,000#
7.4’ X 1.5’ X 4.6’ 500#
4.5’ X 2.1’ X 4.4’ 500#
2.5’ X 1.7’ X 5.8’ 250#
2.11’ X 1.1’ X 4.2’ 150#
4.8’ X 4.3’ X 4.0’ 200#
|
| Electrical Description |
|
|
|
|
|
| Buyers Premium:
A 12 % Buyers Premium applies to the final sale price of this item
|
|
View Detailed Ads
Content copyright © 2011 NetMachinery.com. All rights reserved.
Please send your questions, comments, or bug reports to the Webmaster.
Website Hosting & Development by IndSite.
|
|
